Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 10/10/2022, à 15:29

Isaric

Imprimante en USB + "réseau" et CUPS (sur Brother)

Bonjour,

Mon imprimante est connecté sur un ordinateur A et imprime bien.

Je souhaite imprimer à partir d'un ordinateur B (branché sur la même box).

J'utilisais CUPS il me semble et cela marchait, bien.
Sur ordi B je vois bien l'imprimante de l'ordi A, mais je ne peux plus imprimer. sad

Dernière modification par Isaric (Le 02/03/2023, à 16:59)


"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

Hors ligne

#2 Le 10/10/2022, à 15:33

xubu1957

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#3 Le 10/10/2022, à 15:42

FrancisFDZ

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

Bonjour,
Sans les drivers de l'imprimante, je doute fort que cups puisse la faire fonctionner (même en partage)(donc installer les drivers sur B). De plus, il me semble nécessaire de déclarer l'imprimante "partagée" dans les paramètres de cups de l'ordi A


-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]

Hors ligne

#4 Le 10/10/2022, à 17:33

Isaric

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

Merci xubu1957 et FrancisFDZ

Côté ordinateur A (imprimante)

:~$  cat /etc/lsb-release && uname -ir && groups && lsusb
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=22.04
DISTRIB_CODENAME=jammy
DISTRIB_DESCRIPTION="Ubuntu 22.04.1 LTS"
5.15.0-50-generic x86_64
isaric adm cdrom sudo dip plugdev lpadmin lxd sambashare
Bus 002 Device 003: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 006: ID 0471:0325 Philips (or NXP) SPC 200NC PC Camera
Bus 001 Device 005: ID 413c:2107 Dell Computer Corp. KB212-B Quiet Key Keyboard
Bus 001 Device 004: ID 1c4f:0034 SiGma Micro XM102K Optical Wheel Mouse
Bus 001 Device 003: ID 04f9:0321 Brother Industries, Ltd DCP-L2500D
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
:~$ 
:~$ dpkg -l | grep -i brother
ii  brscan-skey                                0.3.1-2                                    amd64        Brother Linux scanner S-KEY tool
ii  brscan4                                    0.4.10-1                                   amd64        Brother Scanner Driver
ii  dcpl2500dcupswrapper:i386                  3.2.0-1                                    i386         Brother DCP-L2500D CUPS wrapper driver
ii  dcpl2500dlpr:i386                          3.2.0-1                                    i386         Brother DCP-L2500D LPR driver
ii  mfcj5730dwlpr:i386                         1.0.1-0                                    i386         Brother inkjet lpr printer Driver 
ii  printer-driver-brlaser                     6-3                                        amd64        printer driver for (some) Brother laser printers
ii  printer-driver-ptouch                      1.6-2build1                                amd64        printer driver Brother P-touch label printers
:~$ 
:~$ dpkg -l | grep cups
ii  bluez-cups                                 5.64-0ubuntu1                              amd64        Bluetooth printer driver for CUPS
ii  cups                                       2.4.1op1-1ubuntu4.1                        amd64        Common UNIX Printing System(tm) - PPD/driver support, web interface
ii  cups-browsed                               1.28.15-0ubuntu1                           amd64        OpenPrinting CUPS Filters - cups-browsed
ii  cups-bsd                                   2.4.1op1-1ubuntu4.1                        amd64        Common UNIX Printing System(tm) - BSD commands
ii  cups-client                                2.4.1op1-1ubuntu4.1                        amd64        Common UNIX Printing System(tm) - client programs (SysV)
ii  cups-common                                2.4.1op1-1ubuntu4.1                        all          Common UNIX Printing System(tm) - common files
ii  cups-core-drivers                          2.4.1op1-1ubuntu4.1                        amd64        Common UNIX Printing System(tm) - driverless printing
ii  cups-daemon                                2.4.1op1-1ubuntu4.1                        amd64        Common UNIX Printing System(tm) - daemon
ii  cups-filters                               1.28.15-0ubuntu1                           amd64        OpenPrinting CUPS Filters - Main Package
ii  cups-filters-core-drivers                  1.28.15-0ubuntu1                           amd64        OpenPrinting CUPS Filters - Driverless printing
ii  cups-ipp-utils                             2.4.1op1-1ubuntu4.1                        amd64        Common UNIX Printing System(tm) - IPP developer/admin utilities
ii  cups-pk-helper                             0.2.6-1ubuntu5                             amd64        PolicyKit helper to configure cups with fine-grained privileges
ii  cups-ppdc                                  2.4.1op1-1ubuntu4.1                        amd64        Common UNIX Printing System(tm) - PPD manipulation utilities
ii  cups-server-common                         2.4.1op1-1ubuntu4.1                        all          Common UNIX Printing System(tm) - server common files
ii  dcpl2500dcupswrapper:i386                  3.2.0-1                                    i386         Brother DCP-L2500D CUPS wrapper driver
ii  libcups2:amd64                             2.4.1op1-1ubuntu4.1                        amd64        Common UNIX Printing System(tm) - Core library
ii  libcupsfilters1:amd64                      1.28.15-0ubuntu1                           amd64        OpenPrinting CUPS Filters - Shared library
ii  libcupsimage2:amd64                        2.4.1op1-1ubuntu4.1                        amd64        Common UNIX Printing System(tm) - Raster image library
ii  printer-driver-hpcups                      3.21.12+dfsg0-1                            amd64        HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii  python3-cups:amd64                         2.0.1-5build1                              amd64        Python3 bindings for CUPS
ii  python3-cupshelpers                        1.5.16-0ubuntu3                            all          Python utility modules around the CUPS printing system
:~$ 
:~$ lpstat -t
scheduler is running
system default destination: DCPL2500D
matériel pour Brother_MFC_J5730DW : implicitclass://Brother_MFC_J5730DW/
matériel pour DCPL2500D : usb://Brother/DCP-L2500D%20series?serial=E73908D7N915582
Brother_MFC_J5730DW accepte des requêtes depuis dim. 14 août 2022 00:00:02
DCPL2500D accepte des requêtes depuis mer. 05 oct. 2022 14:54:44
printer Brother_MFC_J5730DW disabled since dim. 14 août 2022 00:00:02 -
	Printer disappeared or cups-browsed shutdown
printer DCPL2500D is idle.  enabled since mer. 05 oct. 2022 14:54:44
:~$ 
:~$ /usr/sbin/lpinfo -v
file cups-brf:/
network beh
network ipp
direct hp
network https
network socket
network http
direct usb://Brother/DCP-L2500D%20series?serial=E73908D7N915582
network ipps
network lpd
direct hpfax
:~$ 
cat /var/log/cups/error_log
...
emaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] CGI data ready to be sent.
D [10/Oct/2022:16:13:14 +0200] PID 26150 (/usr/lib/cups/daemon/cups-driverd) exited with no errors.
D [10/Oct/2022:16:13:14 +0200] [Client 23] con->http=0x564494a61270
D [10/Oct/2022:16:13:14 +0200] [Client 23] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=26150, file=26
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for CGI data.
D [10/Oct/2022:16:13:14 +0200] [Client 23] Sending 0-length chunk.
D [10/Oct/2022:16:13:14 +0200] [Client 23] Flushing write buffer.
D [10/Oct/2022:16:13:14 +0200] [Client 23] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:13:14 +0200] [Client 23] Waiting for request.
D [10/Oct/2022:16:13:14 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:13:15 +0200] [Client 23] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:13:15 +0200] [Client 23] Closing connection.
D [10/Oct/2022:16:13:15 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [10/Oct/2022:16:13:15 +0200] Expiring subscriptions...
I [10/Oct/2022:16:13:16 +0200] Expiring subscriptions...
D [10/Oct/2022:16:13:26 +0200] [Client 24] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:13:26 +0200] [Client 24] Closing connection.
D [10/Oct/2022:16:13:26 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [10/Oct/2022:16:13:26 +0200] Expiring subscriptions...
I [10/Oct/2022:16:13:27 +0200] Expiring subscriptions...
I [10/Oct/2022:16:13:41 +0200] Saving subscriptions.conf...
D [10/Oct/2022:16:13:41 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [10/Oct/2022:16:13:41 +0200] Expiring subscriptions...
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:14:51 +0200] [Client 27] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:51 +0200] [Client 27] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:51 +0200] [Client 27] Waiting for request.
I [10/Oct/2022:16:14:51 +0200] Expiring subscriptions...
D [10/Oct/2022:16:14:51 +0200] Report: clients=4
D [10/Oct/2022:16:14:51 +0200] Report: jobs=458
D [10/Oct/2022:16:14:51 +0200] Report: jobs-active=0
D [10/Oct/2022:16:14:51 +0200] Report: printers=2
D [10/Oct/2022:16:14:51 +0200] Report: stringpool-string-count=2314
D [10/Oct/2022:16:14:51 +0200] Report: stringpool-alloc-bytes=12800
D [10/Oct/2022:16:14:51 +0200] Report: stringpool-total-bytes=47192
D [10/Oct/2022:16:14:51 +0200] [Client 27] POST / HTTP/1.1
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:16:14:51 +0200] [Client 27] Read: status=200, state=6
D [10/Oct/2022:16:14:51 +0200] [Client 27] No authentication data provided.
D [10/Oct/2022:16:14:51 +0200] [Client 27] 2.0 CUPS-Get-Default 1
D [10/Oct/2022:16:14:51 +0200] CUPS-Get-Default
D [10/Oct/2022:16:14:51 +0200] [Client 27] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:14:51 +0200] [Client 27] Content-Length: 10329
D [10/Oct/2022:16:14:51 +0200] [Client 27] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:51 +0200] [Client 27] con->http=0x564494a57180
D [10/Oct/2022:16:14:51 +0200] [Client 27] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10329, response=0x564494a45bf0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:51 +0200] [Client 27] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:51 +0200] [Client 27] bytes=0, http_state=0, data_remaining=10329
D [10/Oct/2022:16:14:51 +0200] [Client 27] Flushing write buffer.
D [10/Oct/2022:16:14:51 +0200] [Client 27] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:51 +0200] [Client 27] Waiting for request.
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:16:14:51 +0200] [Client 27] POST / HTTP/1.1
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:14:51 +0200] [Client 27] Read: status=200, state=6
D [10/Oct/2022:16:14:51 +0200] [Client 27] No authentication data provided.
D [10/Oct/2022:16:14:51 +0200] [Client 27] 2.0 CUPS-Get-Printers 2
D [10/Oct/2022:16:14:51 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:14:51 +0200] [Client 27] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:14:51 +0200] [Client 27] Content-Length: 3004
D [10/Oct/2022:16:14:51 +0200] [Client 27] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:51 +0200] [Client 27] con->http=0x564494a57180
D [10/Oct/2022:16:14:51 +0200] [Client 27] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x564494a31b30(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:51 +0200] [Client 27] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:51 +0200] [Client 27] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:16:14:51 +0200] [Client 27] Flushing write buffer.
D [10/Oct/2022:16:14:51 +0200] [Client 27] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:51 +0200] [Client 27] Waiting for request.
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:14:51 +0200] [Client 28] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:51 +0200] [Client 28] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:51 +0200] [Client 28] Waiting for request.
D [10/Oct/2022:16:14:51 +0200] [Client 28] POST / HTTP/1.1
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:16:14:51 +0200] [Client 28] Read: status=200, state=6
D [10/Oct/2022:16:14:51 +0200] [Client 28] No authentication data provided.
D [10/Oct/2022:16:14:51 +0200] [Client 28] 2.0 CUPS-Get-Default 3
D [10/Oct/2022:16:14:51 +0200] CUPS-Get-Default
D [10/Oct/2022:16:14:51 +0200] [Client 28] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:14:51 +0200] [Client 28] Content-Length: 1455
D [10/Oct/2022:16:14:51 +0200] [Client 28] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:51 +0200] [Client 28] con->http=0x564494a5db10
D [10/Oct/2022:16:14:51 +0200] [Client 28] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1455, response=0x564494a2c020(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:51 +0200] [Client 28] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:51 +0200] [Client 28] bytes=0, http_state=0, data_remaining=1455
D [10/Oct/2022:16:14:51 +0200] [Client 28] Flushing write buffer.
D [10/Oct/2022:16:14:51 +0200] [Client 28] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:51 +0200] [Client 28] Waiting for request.
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:16:14:51 +0200] [Client 27] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:14:51 +0200] [Client 27] Read: status=200, state=6
D [10/Oct/2022:16:14:51 +0200] [Client 27] No authentication data provided.
D [10/Oct/2022:16:14:51 +0200] [Client 27] Read: status=100, state=6
D [10/Oct/2022:16:14:51 +0200] [Client 27] Read: status=100, state=6
D [10/Oct/2022:16:14:51 +0200] [Client 27] Read: status=100, state=6
D [10/Oct/2022:16:14:51 +0200] [Client 27] Read: status=100, state=6
D [10/Oct/2022:16:14:51 +0200] [Client 27] Read: status=100, state=6
D [10/Oct/2022:16:14:51 +0200] [Client 27] Read: status=100, state=6
D [10/Oct/2022:16:14:51 +0200] [Client 27] Read: status=100, state=6
D [10/Oct/2022:16:14:51 +0200] [Client 27] Read: status=100, state=6
D [10/Oct/2022:16:14:51 +0200] [Client 27] Read: status=100, state=6
D [10/Oct/2022:16:14:51 +0200] [Client 27] 2.0 Get-Printer-Attributes 4
D [10/Oct/2022:16:14:51 +0200] Get-Printer-Attributes ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:16:14:51 +0200] [Client 27] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:14:51 +0200] [Client 27] Content-Length: 13636
D [10/Oct/2022:16:14:51 +0200] [Client 27] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:51 +0200] [Client 27] con->http=0x564494a57180
D [10/Oct/2022:16:14:51 +0200] [Client 27] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=13636, response=0x564494a37170(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:51 +0200] [Client 27] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:51 +0200] [Client 27] bytes=0, http_state=0, data_remaining=13636
D [10/Oct/2022:16:14:51 +0200] [Client 27] Flushing write buffer.
D [10/Oct/2022:16:14:51 +0200] [Client 27] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:51 +0200] [Client 27] Waiting for request.
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:16:14:51 +0200] [Client 27] POST / HTTP/1.1
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:14:51 +0200] [Client 27] Read: status=200, state=6
D [10/Oct/2022:16:14:51 +0200] [Client 27] No authentication data provided.
D [10/Oct/2022:16:14:51 +0200] [Client 27] 2.0 Get-Printer-Attributes 5
D [10/Oct/2022:16:14:51 +0200] Get-Printer-Attributes ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:16:14:51 +0200] [Client 27] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:14:51 +0200] [Client 27] Content-Length: 98
D [10/Oct/2022:16:14:51 +0200] [Client 27] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:51 +0200] [Client 27] con->http=0x564494a57180
D [10/Oct/2022:16:14:51 +0200] [Client 27] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=98, response=0x564494a29530(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:51 +0200] [Client 27] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:51 +0200] [Client 27] bytes=0, http_state=0, data_remaining=98
D [10/Oct/2022:16:14:51 +0200] [Client 27] Flushing write buffer.
D [10/Oct/2022:16:14:51 +0200] [Client 27] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:51 +0200] [Client 27] Waiting for request.
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:14:51 +0200] [Client 29] Server address is "[v1.::1]".
D [10/Oct/2022:16:14:51 +0200] [Client 29] Accepted from localhost:51042 (IPv6)
D [10/Oct/2022:16:14:51 +0200] [Client 29] Waiting for request.
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:16:14:51 +0200] [Client 30] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:51 +0200] [Client 30] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:51 +0200] [Client 30] Waiting for request.
D [10/Oct/2022:16:14:51 +0200] [Client 30] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:51 +0200] [Client 30] Closing connection.
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:14:51 +0200] [Client 31] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:51 +0200] [Client 31] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:51 +0200] [Client 31] Waiting for request.
D [10/Oct/2022:16:14:51 +0200] [Client 29] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:51 +0200] [Client 29] Closing connection.
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:14:51 +0200] [Client 32] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:51 +0200] [Client 32] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:51 +0200] [Client 32] Waiting for request.
D [10/Oct/2022:16:14:51 +0200] [Client 31] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:51 +0200] [Client 31] Closing connection.
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:16:14:51 +0200] [Client 32] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:51 +0200] [Client 32] Closing connection.
D [10/Oct/2022:16:14:51 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [10/Oct/2022:16:14:52 +0200] Expiring subscriptions...
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:14:56 +0200] [Client 33] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:56 +0200] [Client 33] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:56 +0200] [Client 33] Waiting for request.
I [10/Oct/2022:16:14:56 +0200] Expiring subscriptions...
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:16:14:56 +0200] [Client 34] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:56 +0200] [Client 34] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:56 +0200] [Client 34] Waiting for request.
D [10/Oct/2022:16:14:56 +0200] [Client 33] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:56 +0200] [Client 33] Closing connection.
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:16:14:56 +0200] [Client 34] POST / HTTP/1.1
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=200, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] No authentication data provided.
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 34] 2.0 CUPS-Get-Printers 1
D [10/Oct/2022:16:14:56 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:14:56 +0200] [Client 34] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:14:56 +0200] [Client 34] Content-Length: 1821
D [10/Oct/2022:16:14:56 +0200] [Client 34] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:56 +0200] [Client 34] con->http=0x564494a649d0
D [10/Oct/2022:16:14:56 +0200] [Client 34] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1821, response=0x564494a45bf0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:56 +0200] [Client 34] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:56 +0200] [Client 34] bytes=0, http_state=0, data_remaining=1821
D [10/Oct/2022:16:14:56 +0200] [Client 34] Flushing write buffer.
D [10/Oct/2022:16:14:56 +0200] [Client 34] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:56 +0200] [Client 34] Waiting for request.
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:16:14:56 +0200] [Client 34] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:56 +0200] [Client 34] Closing connection.
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:14:56 +0200] [Client 35] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:56 +0200] [Client 35] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:56 +0200] [Client 35] Waiting for request.
D [10/Oct/2022:16:14:56 +0200] [Client 35] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=200, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] No authentication data provided.
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] Read: status=100, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 35] 2.1 Print-Job 1
D [10/Oct/2022:16:14:56 +0200] Print-Job ipp://localhost:631/printers/DCPL2500D
D [10/Oct/2022:16:14:56 +0200] [Job ???] Auto-typing file...
I [10/Oct/2022:16:14:56 +0200] [Job ???] Request file type is application/pdf.
D [10/Oct/2022:16:14:56 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [10/Oct/2022:16:14:56 +0200] [Job 504] Applying default options...
D [10/Oct/2022:16:14:56 +0200] add_job: requesting-user-name="isaric"
D [10/Oct/2022:16:14:56 +0200] Adding default job-sheets values "none,none"...
I [10/Oct/2022:16:14:56 +0200] [Job 504] Adding start banner page "none".
D [10/Oct/2022:16:14:56 +0200] Notifier dbus started - PID = 26216
D [10/Oct/2022:16:14:56 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:56 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [10/Oct/2022:16:14:56 +0200] [Job 504] Adding end banner page "none".
I [10/Oct/2022:16:14:56 +0200] [Job 504] File of type application/pdf queued by "isaric".
D [10/Oct/2022:16:14:56 +0200] [Job 504] hold_until=0
I [10/Oct/2022:16:14:56 +0200] [Job 504] Queued on "DCPL2500D" by "isaric".
D [10/Oct/2022:16:14:56 +0200] [Job 504] time-at-processing=1665411296
D [10/Oct/2022:16:14:56 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:56 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Job 504] 2 filters for job:
D [10/Oct/2022:16:14:56 +0200] [Job 504] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [10/Oct/2022:16:14:56 +0200] [Job 504] brother_lpdwrapper_DCPL2500D (application/vnd.cups-pdf to printer/DCPL2500D, cost 0)
D [10/Oct/2022:16:14:56 +0200] [Job 504] job-sheets=none,none
D [10/Oct/2022:16:14:56 +0200] [Job 504] argv[0]="DCPL2500D"
D [10/Oct/2022:16:14:56 +0200] [Job 504] argv[1]="504"
D [10/Oct/2022:16:14:56 +0200] [Job 504] argv[2]="isaric"
D [10/Oct/2022:16:14:56 +0200] [Job 504] argv[3]="https://doc.ubuntu-fr.org/cups"
D [10/Oct/2022:16:14:56 +0200] [Job 504] argv[4]="1"
D [10/Oct/2022:16:14:56 +0200] [Job 504] argv[5]="PageSize=A4 EPRendering=None XRXColor=BW INK=MONO SelectColor=Grayscale HPColorMode=GrayscalePrint ProcessColorModel=Mono BRMonoColor=Mono CNGrayscale PrintoutMode=Normal.Gray BRPrintQuality=Black Collate Duplex=DuplexNoTumble ColorMode=Mono CNIJGrayScale=1 ARCMode=CMBW ColorModel=Gray OKControl=Gray XROutputColor=PrintAsGrayscale BLW=TrueM job-uuid=urn:uuid:4fc8bcd3-4c81-3f0d-45e7-d12c61e1519b job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1665411296 time-at-processing=1665411296"
D [10/Oct/2022:16:14:56 +0200] [Job 504] argv[6]="/var/spool/cups/d00504-001"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[3]="CUPS_REQUESTROOT=/var/spool/cups"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[4]="CUPS_SERVERBIN=/usr/lib/cups"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[5]="CUPS_SERVERROOT=/etc/cups"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[6]="CUPS_STATEDIR=/run/cups"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[7]="HOME=/var/spool/cups/tmp"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[9]="SERVER_ADMIN=root@isaric-p6-2007frm"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[10]="SOFTWARE=CUPS/2.4.1"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[11]="TMPDIR=/var/spool/cups/tmp"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[12]="USER=root"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[13]="CUPS_MAX_MESSAGE=2047"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[14]="CUPS_SERVER=/run/cups/cups.sock"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[16]="IPP_PORT=631"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[17]="CHARSET=utf-8"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[18]="LANG=fr_FR.UTF-8"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[19]="PPD=/etc/cups/ppd/DCPL2500D.ppd"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[20]="CONTENT_TYPE=application/pdf"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[21]="DEVICE_URI=usb://Brother/DCP-L2500D%20series?serial=E73908D7N915582"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[22]="PRINTER_INFO=DCPL2500D"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[23]="PRINTER_LOCATION="
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[24]="PRINTER=DCPL2500D"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[25]="PRINTER_STATE_REASONS=none"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[26]="CUPS_FILETYPE=document"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-pdf"
D [10/Oct/2022:16:14:56 +0200] [Job 504] envp[28]="AUTH_I****"
I [10/Oct/2022:16:14:56 +0200] [Job 504] Started filter /usr/lib/cups/filter/pdftopdf (PID 26218)
I [10/Oct/2022:16:14:56 +0200] [Job 504] Started filter /usr/lib/cups/filter/brother_lpdwrapper_DCPL2500D (PID 26220)
I [10/Oct/2022:16:14:56 +0200] [Job 504] Started backend /usr/lib/cups/backend/usb (PID 26221)
D [10/Oct/2022:16:14:56 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 35] Returning IPP successful-ok for Print-Job (ipp://localhost:631/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:14:56 +0200] [Client 35] Content-Length: 193
D [10/Oct/2022:16:14:56 +0200] [Client 35] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:56 +0200] [Client 35] con->http=0x564494a61270
D [10/Oct/2022:16:14:56 +0200] [Client 35] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=193, response=0x564494a56350(IPP_STATE_IDLE), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:56 +0200] [Client 35] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:56 +0200] [Client 35] bytes=0, http_state=0, data_remaining=193
D [10/Oct/2022:16:14:56 +0200] [Client 35] Flushing write buffer.
D [10/Oct/2022:16:14:56 +0200] [Client 35] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:56 +0200] [Client 35] Waiting for request.
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:56 +0200] [Notifier] JobCreated
D [10/Oct/2022:16:14:56 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:56 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:56 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:56 +0200] [Notifier] PrinterStateChanged
D [10/Oct/2022:16:14:56 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:56 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:56 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:56 +0200] [Notifier] JobState
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 36] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:56 +0200] [Client 36] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:56 +0200] [Client 36] Waiting for request.
D [10/Oct/2022:16:14:56 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:14:56 +0200] [Client 5] 2.0 Get-Notifications 41
D [10/Oct/2022:16:14:56 +0200] Get-Notifications /printers/
D [10/Oct/2022:16:14:56 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:14:56 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [10/Oct/2022:16:14:56 +0200] [Client 5] Content-Length: 1645
D [10/Oct/2022:16:14:56 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:56 +0200] [Client 35] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:56 +0200] [Client 35] Closing connection.
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 37] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:56 +0200] [Client 37] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:56 +0200] [Client 37] Waiting for request.
D [10/Oct/2022:16:14:56 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:14:56 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1645, response=0x564494a6db10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:56 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:56 +0200] [Client 5] bytes=0, http_state=0, data_remaining=1645
D [10/Oct/2022:16:14:56 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:14:56 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:56 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 36] POST / HTTP/1.1
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 36] Read: status=200, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 36] No authentication data provided.
D [10/Oct/2022:16:14:56 +0200] [Client 36] 2.0 Get-Job-Attributes 16
D [10/Oct/2022:16:14:56 +0200] Get-Job-Attributes ipp://localhost/jobs/504
D [10/Oct/2022:16:14:56 +0200] [Client 36] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/504) from localhost.
D [10/Oct/2022:16:14:56 +0200] [Client 36] Content-Length: 166
D [10/Oct/2022:16:14:56 +0200] [Client 36] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:56 +0200] [Client 36] con->http=0x564494a6a3b0
D [10/Oct/2022:16:14:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=166, response=0x564494a56350(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:56 +0200] [Client 36] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:56 +0200] [Client 36] bytes=0, http_state=0, data_remaining=166
D [10/Oct/2022:16:14:56 +0200] [Client 36] Flushing write buffer.
D [10/Oct/2022:16:14:56 +0200] [Client 36] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:56 +0200] [Client 36] Waiting for request.
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 37] POST / HTTP/1.1
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 37] Read: status=200, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 37] No authentication data provided.
D [10/Oct/2022:16:14:56 +0200] [Client 37] 2.0 CUPS-Get-Default 17
D [10/Oct/2022:16:14:56 +0200] CUPS-Get-Default
D [10/Oct/2022:16:14:56 +0200] [Client 37] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:14:56 +0200] [Client 37] Content-Length: 10329
D [10/Oct/2022:16:14:56 +0200] [Client 37] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:56 +0200] [Client 36] POST / HTTP/1.1
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 36] Read: status=200, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 36] No authentication data provided.
D [10/Oct/2022:16:14:56 +0200] [Client 36] 2.0 Get-Jobs 18
D [10/Oct/2022:16:14:56 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:16:14:56 +0200] [Client 36] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:14:56 +0200] [Client 36] Content-Length: 393
D [10/Oct/2022:16:14:56 +0200] [Client 36] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:56 +0200] [Client 37] con->http=0x564494a61270
D [10/Oct/2022:16:14:56 +0200] [Client 37] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10329, response=0x564494a6db10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:56 +0200] [Client 37] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:56 +0200] [Client 37] bytes=0, http_state=0, data_remaining=10329
D [10/Oct/2022:16:14:56 +0200] [Client 37] Flushing write buffer.
D [10/Oct/2022:16:14:56 +0200] [Client 37] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:56 +0200] [Client 37] Waiting for request.
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 38] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:56 +0200] [Client 38] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:56 +0200] [Client 38] Waiting for request.
D [10/Oct/2022:16:14:56 +0200] [Client 36] con->http=0x564494a6a3b0
D [10/Oct/2022:16:14:56 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=393, response=0x564494a71b40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:56 +0200] [Client 36] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:56 +0200] [Client 36] bytes=0, http_state=0, data_remaining=393
D [10/Oct/2022:16:14:56 +0200] [Client 36] Flushing write buffer.
D [10/Oct/2022:16:14:56 +0200] [Client 36] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:56 +0200] [Client 36] Waiting for request.
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 38] POST / HTTP/1.1
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 38] Read: status=200, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 38] No authentication data provided.
D [10/Oct/2022:16:14:56 +0200] [Client 38] 2.0 Get-Job-Attributes 42
D [10/Oct/2022:16:14:56 +0200] Get-Job-Attributes ipp://localhost/jobs/504
D [10/Oct/2022:16:14:56 +0200] [Client 38] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/504) from localhost.
D [10/Oct/2022:16:14:56 +0200] [Client 38] Content-Length: 112
D [10/Oct/2022:16:14:56 +0200] [Client 38] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:56 +0200] [Client 38] con->http=0x564494a71f70
D [10/Oct/2022:16:14:56 +0200] [Client 38] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=112, response=0x564494a717f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:56 +0200] [Client 38] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:56 +0200] [Client 38] bytes=0, http_state=0, data_remaining=112
D [10/Oct/2022:16:14:56 +0200] [Client 38] Flushing write buffer.
D [10/Oct/2022:16:14:56 +0200] [Client 38] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:56 +0200] [Client 38] Waiting for request.
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 38] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:56 +0200] [Client 38] Closing connection.
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 39] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:56 +0200] [Client 39] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:56 +0200] [Client 39] Waiting for request.
D [10/Oct/2022:16:14:56 +0200] [Client 39] POST / HTTP/1.1
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 39] Read: status=200, state=6
D [10/Oct/2022:16:14:56 +0200] [Client 39] No authentication data provided.
D [10/Oct/2022:16:14:56 +0200] [Client 39] 2.0 Get-Job-Attributes 43
D [10/Oct/2022:16:14:56 +0200] Get-Job-Attributes ipp://localhost/jobs/504
D [10/Oct/2022:16:14:56 +0200] [Client 39] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/504) from localhost.
D [10/Oct/2022:16:14:56 +0200] [Client 39] Content-Length: 112
D [10/Oct/2022:16:14:56 +0200] [Client 39] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:56 +0200] [Client 39] con->http=0x564494a719a0
D [10/Oct/2022:16:14:56 +0200] [Client 39] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=112, response=0x564494a5d3a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:56 +0200] [Client 39] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:56 +0200] [Client 39] bytes=0, http_state=0, data_remaining=112
D [10/Oct/2022:16:14:56 +0200] [Client 39] Flushing write buffer.
D [10/Oct/2022:16:14:56 +0200] [Client 39] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:56 +0200] [Client 39] Waiting for request.
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:56 +0200] [Client 39] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:56 +0200] [Client 39] Closing connection.
D [10/Oct/2022:16:14:56 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Job 504] pdftopdf: Last filter determined by the PPD: brother_lpdwrapper_DCPL2500D; FINAL_CONTENT_TYPE: application/vnd.cups-pdf => pdftopdf will not log pages in page_log.
D [10/Oct/2022:16:14:57 +0200] [Job 504] Loading USB quirks from \"/usr/share/cups/usb\".
D [10/Oct/2022:16:14:57 +0200] [Job 504] Loaded 118 quirks.
D [10/Oct/2022:16:14:57 +0200] [Job 504] Printing on printer with URI: usb://Brother/DCP-L2500D%20series?serial=E73908D7N915582
I [10/Oct/2022:16:14:57 +0200] Expiring subscriptions...
D [10/Oct/2022:16:14:57 +0200] [Notifier] Connected to D-BUS
D [10/Oct/2022:16:14:57 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:57 +0200] [Client 37] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 37] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 37] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 37] 2.0 CUPS-Get-Printers 19
D [10/Oct/2022:16:14:57 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:14:57 +0200] [Client 37] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 37] Content-Length: 3004
D [10/Oct/2022:16:14:57 +0200] [Client 37] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Job 504] libusb_get_device_list=9
D [10/Oct/2022:16:14:57 +0200] [Job 504] STATE: +connecting-to-device
D [10/Oct/2022:16:14:57 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 37] con->http=0x564494a61270
D [10/Oct/2022:16:14:57 +0200] [Client 37] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x564494a55e60(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 37] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 37] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:16:14:57 +0200] [Client 37] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 37] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 37] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:57 +0200] [Notifier] PrinterStateChanged
D [10/Oct/2022:16:14:57 +0200] [Client 36] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 36] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 36] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 36] 2.0 CUPS-Get-Default 20
D [10/Oct/2022:16:14:57 +0200] CUPS-Get-Default
D [10/Oct/2022:16:14:57 +0200] [Client 36] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 36] Content-Length: 10345
D [10/Oct/2022:16:14:57 +0200] [Client 36] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:57 +0200] [Client 36] con->http=0x564494a6a3b0
D [10/Oct/2022:16:14:57 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10345, response=0x564494a5d3a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 36] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 36] bytes=0, http_state=0, data_remaining=10345
D [10/Oct/2022:16:14:57 +0200] [Client 36] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 36] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 36] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Job 504] STATE: -connecting-to-device
D [10/Oct/2022:16:14:57 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
D [10/Oct/2022:16:14:57 +0200] [Job 504] Device protocol: 2
D [10/Oct/2022:16:14:57 +0200] [Job 504] Sending data to printer.
D [10/Oct/2022:16:14:57 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Job 504] Set job-printer-state-message to "Sending data to printer.", current level=INFO
D [10/Oct/2022:16:14:57 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:57 +0200] [Client 36] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 36] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 36] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 36] 2.0 CUPS-Get-Printers 21
D [10/Oct/2022:16:14:57 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:14:57 +0200] [Client 36] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 36] Content-Length: 3004
D [10/Oct/2022:16:14:57 +0200] [Client 36] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:57 +0200] [Client 36] con->http=0x564494a6a3b0
D [10/Oct/2022:16:14:57 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x564494a724a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 36] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 36] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:16:14:57 +0200] [Client 36] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 36] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 36] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:57 +0200] [Notifier] PrinterStateChanged
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 40] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:57 +0200] [Client 40] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:57 +0200] [Client 40] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 5] 2.0 Get-Notifications 44
D [10/Oct/2022:16:14:57 +0200] Get-Notifications /printers/
D [10/Oct/2022:16:14:57 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:14:57 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 5] Content-Length: 985
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=985, response=0x564494a71060(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] bytes=0, http_state=0, data_remaining=985
D [10/Oct/2022:16:14:57 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 40] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 40] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 40] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 40] 2.0 CUPS-Get-Default 22
D [10/Oct/2022:16:14:57 +0200] CUPS-Get-Default
D [10/Oct/2022:16:14:57 +0200] [Client 40] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 40] Content-Length: 10353
D [10/Oct/2022:16:14:57 +0200] [Client 40] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 5] 2.0 CUPS-Get-Default 45
D [10/Oct/2022:16:14:57 +0200] CUPS-Get-Default
D [10/Oct/2022:16:14:57 +0200] [Client 5] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 5] Content-Length: 10353
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 40] con->http=0x564494a738f0
D [10/Oct/2022:16:14:57 +0200] [Client 40] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10353, response=0x564494a71860(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 40] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 40] bytes=0, http_state=0, data_remaining=10353
D [10/Oct/2022:16:14:57 +0200] [Client 40] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 40] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 40] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10353, response=0x564494a78860(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] bytes=0, http_state=0, data_remaining=10353
D [10/Oct/2022:16:14:57 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 5] 2.0 CUPS-Get-Printers 46
D [10/Oct/2022:16:14:57 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:14:57 +0200] [Client 5] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 5] Content-Length: 3004
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:57 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:57 +0200] [Client 40] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 40] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 40] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 40] 2.0 CUPS-Get-Printers 23
D [10/Oct/2022:16:14:57 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:14:57 +0200] [Client 40] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 40] Content-Length: 3004
D [10/Oct/2022:16:14:57 +0200] [Client 40] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x564494a71860(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:16:14:57 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 40] con->http=0x564494a738f0
D [10/Oct/2022:16:14:57 +0200] [Client 40] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x564494a71c50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 40] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 40] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:16:14:57 +0200] [Client 40] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 40] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 40] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Job 504] PDF interactive form and annotation flattening done via QPDF
D [10/Oct/2022:16:14:57 +0200] [Job 504] pdftopdf: \"print-scaling\" IPP attribute: auto
D [10/Oct/2022:16:14:57 +0200] [Job 504] pdftopdf: Print scaling mode: Do not scale, center, crop if needed
D [10/Oct/2022:16:14:57 +0200] [Job 504] After Cropping: 595.000000 843.000000 595.000000 842.000000
D [10/Oct/2022:16:14:57 +0200] [Job 504] PID 26218 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [10/Oct/2022:16:14:57 +0200] [Client 37] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 37] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 37] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 37] 2.0 Get-Jobs 24
D [10/Oct/2022:16:14:57 +0200] Get-Jobs ipp://localhost/printers/Brother_MFC_J5730DW
D [10/Oct/2022:16:14:57 +0200] [Client 37] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Brother_MFC_J5730DW) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 37] Content-Length: 75
D [10/Oct/2022:16:14:57 +0200] [Client 37] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 37] con->http=0x564494a61270
D [10/Oct/2022:16:14:57 +0200] [Client 37] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a72590(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 37] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 37] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:14:57 +0200] [Client 37] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 37] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 37] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 41] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:57 +0200] [Client 41] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:57 +0200] [Client 41] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 42] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:57 +0200] [Client 42] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:57 +0200] [Client 42] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] [Client 41] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 41] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 41] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 41] 2.0 Get-Jobs 25
D [10/Oct/2022:16:14:57 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:16:14:57 +0200] [Client 41] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 41] Content-Length: 393
D [10/Oct/2022:16:14:57 +0200] [Client 41] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 41] con->http=0x564494a78210
D [10/Oct/2022:16:14:57 +0200] [Client 41] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=393, response=0x564494a71b30(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 41] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 41] bytes=0, http_state=0, data_remaining=393
D [10/Oct/2022:16:14:57 +0200] [Client 41] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 41] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 41] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 42] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 42] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 42] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 42] 2.0 Get-Jobs 26
D [10/Oct/2022:16:14:57 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm
D [10/Oct/2022:16:14:57 +0200] Get-Jobs client-error-not-found: The printer or class does not exist.
D [10/Oct/2022:16:14:57 +0200] [Client 42] Returning IPP client-error-not-found for Get-Jobs (ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 42] Content-Length: 130
D [10/Oct/2022:16:14:57 +0200] [Client 42] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 36] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 36] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 36] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 36] 2.0 Get-Jobs 27
D [10/Oct/2022:16:14:57 +0200] Get-Jobs ipp://localhost/printers/Brother_MFC_J5730DW
D [10/Oct/2022:16:14:57 +0200] [Client 36] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Brother_MFC_J5730DW) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 36] Content-Length: 75
D [10/Oct/2022:16:14:57 +0200] [Client 36] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 42] con->http=0x564494a7cb30
D [10/Oct/2022:16:14:57 +0200] [Client 42] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=130, response=0x564494a71860(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 42] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 42] bytes=0, http_state=0, data_remaining=130
D [10/Oct/2022:16:14:57 +0200] [Client 42] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 42] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 42] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 36] con->http=0x564494a6a3b0
D [10/Oct/2022:16:14:57 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a714b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 36] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 36] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:14:57 +0200] [Client 36] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 36] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 36] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 37] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 37] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 37] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 37] 2.0 Get-Jobs 28
D [10/Oct/2022:16:14:57 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:16:14:57 +0200] [Client 37] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 37] Content-Length: 393
D [10/Oct/2022:16:14:57 +0200] [Client 37] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 37] con->http=0x564494a61270
D [10/Oct/2022:16:14:57 +0200] [Client 37] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=393, response=0x564494a72410(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 37] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 37] bytes=0, http_state=0, data_remaining=393
D [10/Oct/2022:16:14:57 +0200] [Client 37] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 37] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 37] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 41] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 41] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 41] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 41] 2.0 Get-Jobs 29
D [10/Oct/2022:16:14:57 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm
D [10/Oct/2022:16:14:57 +0200] Get-Jobs client-error-not-found: The printer or class does not exist.
D [10/Oct/2022:16:14:57 +0200] [Client 41] Returning IPP client-error-not-found for Get-Jobs (ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 41] Content-Length: 130
D [10/Oct/2022:16:14:57 +0200] [Client 41] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 41] con->http=0x564494a78210
D [10/Oct/2022:16:14:57 +0200] [Client 41] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=130, response=0x564494a714b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 41] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 41] bytes=0, http_state=0, data_remaining=130
D [10/Oct/2022:16:14:57 +0200] [Client 41] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 41] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 41] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 5] 2.0 CUPS-Get-Default 47
D [10/Oct/2022:16:14:57 +0200] CUPS-Get-Default
D [10/Oct/2022:16:14:57 +0200] [Client 5] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 5] Content-Length: 10353
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10353, response=0x564494a72410(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] bytes=0, http_state=0, data_remaining=10353
D [10/Oct/2022:16:14:57 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 5] 2.0 CUPS-Get-Printers 48
D [10/Oct/2022:16:14:57 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:14:57 +0200] [Client 5] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 5] Content-Length: 3004
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x564494a6df70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:16:14:57 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 36] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 36] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 36] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 36] 2.0 Get-Jobs 30
D [10/Oct/2022:16:14:57 +0200] Get-Jobs ipp://localhost/printers/Brother_MFC_J5730DW
D [10/Oct/2022:16:14:57 +0200] [Client 36] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Brother_MFC_J5730DW) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 36] Content-Length: 75
D [10/Oct/2022:16:14:57 +0200] [Client 36] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 36] con->http=0x564494a6a3b0
D [10/Oct/2022:16:14:57 +0200] [Client 36] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a70be0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 36] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 36] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:14:57 +0200] [Client 36] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 36] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 36] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 37] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 37] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 37] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 37] 2.0 Get-Jobs 31
D [10/Oct/2022:16:14:57 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:16:14:57 +0200] [Client 37] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 37] Content-Length: 393
D [10/Oct/2022:16:14:57 +0200] [Client 37] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 37] con->http=0x564494a61270
D [10/Oct/2022:16:14:57 +0200] [Client 37] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=393, response=0x564494a6df70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 37] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 37] bytes=0, http_state=0, data_remaining=393
D [10/Oct/2022:16:14:57 +0200] [Client 37] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 37] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 37] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 42] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 42] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 42] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 42] 2.0 Get-Jobs 32
D [10/Oct/2022:16:14:57 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm
D [10/Oct/2022:16:14:57 +0200] Get-Jobs client-error-not-found: The printer or class does not exist.
D [10/Oct/2022:16:14:57 +0200] [Client 42] Returning IPP client-error-not-found for Get-Jobs (ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 42] Content-Length: 130
D [10/Oct/2022:16:14:57 +0200] [Client 42] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 42] con->http=0x564494a7cb30
D [10/Oct/2022:16:14:57 +0200] [Client 42] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=130, response=0x564494a71860(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 42] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 42] bytes=0, http_state=0, data_remaining=130
D [10/Oct/2022:16:14:57 +0200] [Client 42] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 42] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 42] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 5] 2.0 Get-Notifications 49
D [10/Oct/2022:16:14:57 +0200] Get-Notifications /printers/
D [10/Oct/2022:16:14:57 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:14:57 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 5] Content-Length: 127
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564494a6df70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] bytes=0, http_state=0, data_remaining=127
D [10/Oct/2022:16:14:57 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 5] 2.0 Get-Notifications 50
D [10/Oct/2022:16:14:57 +0200] Get-Notifications /printers/
D [10/Oct/2022:16:14:57 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:14:57 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 5] Content-Length: 127
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564494a72410(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] bytes=0, http_state=0, data_remaining=127
D [10/Oct/2022:16:14:57 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:14:57 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:14:57 +0200] [Client 5] 2.0 Get-Notifications 51
D [10/Oct/2022:16:14:57 +0200] Get-Notifications /printers/
D [10/Oct/2022:16:14:57 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:14:57 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [10/Oct/2022:16:14:57 +0200] [Client 5] Content-Length: 127
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:14:57 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564494a71860(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:57 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:57 +0200] [Client 5] bytes=0, http_state=0, data_remaining=127
D [10/Oct/2022:16:14:57 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:14:57 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:57 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 40] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:57 +0200] [Client 40] Closing connection.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 36] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:57 +0200] [Client 36] Closing connection.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 37] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:57 +0200] [Client 37] Closing connection.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:57 +0200] [Client 42] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:57 +0200] [Client 42] Closing connection.
D [10/Oct/2022:16:14:57 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
I [10/Oct/2022:16:14:58 +0200] Expiring subscriptions...
D [10/Oct/2022:16:14:58 +0200] [Job 504] Read 4096 bytes of print data...
D [10/Oct/2022:16:14:58 +0200] [Job 504] Wrote 4096 bytes of print data...
D [10/Oct/2022:16:14:58 +0200] [Job 504] Read 8192 bytes of print data...
D [10/Oct/2022:16:14:58 +0200] [Job 504] Wrote 8192 bytes of print data...
D [10/Oct/2022:16:14:58 +0200] [Job 504] Read 8192 bytes of print data...
D [10/Oct/2022:16:14:58 +0200] [Job 504] Wrote 8192 bytes of print data...
D [10/Oct/2022:16:14:58 +0200] [Job 504] Read 1466 bytes of print data...
D [10/Oct/2022:16:14:58 +0200] [Job 504] Wrote 1466 bytes of print data...
D [10/Oct/2022:16:14:58 +0200] [Job 504] PID 26220 (/usr/lib/cups/filter/brother_lpdwrapper_DCPL2500D) exited with no errors.
D [10/Oct/2022:16:14:58 +0200] [Job 504] Sent 21946 bytes...
D [10/Oct/2022:16:14:58 +0200] [Job 504] Waiting for read thread to exit...
I [10/Oct/2022:16:14:59 +0200] Expiring subscriptions...
D [10/Oct/2022:16:14:59 +0200] [Job 504] PID 26221 (/usr/lib/cups/backend/usb) exited with no errors.
D [10/Oct/2022:16:14:59 +0200] [Job 504] time-at-completed=1665411299
D [10/Oct/2022:16:14:59 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
I [10/Oct/2022:16:14:59 +0200] [Job 504] Job completed.
I [10/Oct/2022:16:14:59 +0200] Expiring subscriptions...
D [10/Oct/2022:16:14:59 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:59 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:59 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:59 +0200] [Notifier] JobCompleted
D [10/Oct/2022:16:14:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:59 +0200] [Notifier] PrinterStateChanged
D [10/Oct/2022:16:14:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:14:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:14:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:14:59 +0200] [Client 5] 2.0 Get-Notifications 52
D [10/Oct/2022:16:14:59 +0200] Get-Notifications /printers/
D [10/Oct/2022:16:14:59 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:14:59 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [10/Oct/2022:16:14:59 +0200] [Client 5] Content-Length: 1114
D [10/Oct/2022:16:14:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 43] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:59 +0200] [Client 43] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:59 +0200] [Client 43] Waiting for request.
D [10/Oct/2022:16:14:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:14:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1114, response=0x564494a70610(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=1114
D [10/Oct/2022:16:14:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:14:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 43] POST / HTTP/1.1
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 43] Read: status=200, state=6
D [10/Oct/2022:16:14:59 +0200] [Client 43] No authentication data provided.
D [10/Oct/2022:16:14:59 +0200] [Client 43] 2.0 Get-Job-Attributes 33
D [10/Oct/2022:16:14:59 +0200] Get-Job-Attributes ipp://localhost/jobs/504
D [10/Oct/2022:16:14:59 +0200] [Client 43] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/504) from localhost.
D [10/Oct/2022:16:14:59 +0200] [Client 43] Content-Length: 166
D [10/Oct/2022:16:14:59 +0200] [Client 43] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:59 +0200] [Client 43] con->http=0x564494a61270
D [10/Oct/2022:16:14:59 +0200] [Client 43] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=166, response=0x564494a4c9d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:59 +0200] [Client 43] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:59 +0200] [Client 43] bytes=0, http_state=0, data_remaining=166
D [10/Oct/2022:16:14:59 +0200] [Client 43] Flushing write buffer.
D [10/Oct/2022:16:14:59 +0200] [Client 43] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:59 +0200] [Client 43] Waiting for request.
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 44] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:14:59 +0200] [Client 44] Accepted from localhost (Domain)
D [10/Oct/2022:16:14:59 +0200] [Client 44] Waiting for request.
D [10/Oct/2022:16:14:59 +0200] [Client 43] POST / HTTP/1.1
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 43] Read: status=200, state=6
D [10/Oct/2022:16:14:59 +0200] [Client 43] No authentication data provided.
D [10/Oct/2022:16:14:59 +0200] [Client 43] 2.0 CUPS-Get-Default 34
D [10/Oct/2022:16:14:59 +0200] CUPS-Get-Default
D [10/Oct/2022:16:14:59 +0200] [Client 43] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:14:59 +0200] [Client 43] Content-Length: 10329
D [10/Oct/2022:16:14:59 +0200] [Client 43] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:59 +0200] [Client 41] POST / HTTP/1.1
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 41] Read: status=200, state=6
D [10/Oct/2022:16:14:59 +0200] [Client 41] No authentication data provided.
D [10/Oct/2022:16:14:59 +0200] [Client 41] 2.0 Get-Jobs 35
D [10/Oct/2022:16:14:59 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:16:14:59 +0200] [Client 41] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:14:59 +0200] [Client 41] Content-Length: 75
D [10/Oct/2022:16:14:59 +0200] [Client 41] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:59 +0200] [Client 44] POST / HTTP/1.1
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 44] Read: status=200, state=6
D [10/Oct/2022:16:14:59 +0200] [Client 44] No authentication data provided.
D [10/Oct/2022:16:14:59 +0200] [Client 44] 2.0 Get-Job-Attributes 53
D [10/Oct/2022:16:14:59 +0200] Get-Job-Attributes ipp://localhost/jobs/504
D [10/Oct/2022:16:14:59 +0200] [Client 44] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/504) from localhost.
D [10/Oct/2022:16:14:59 +0200] [Client 44] Content-Length: 112
D [10/Oct/2022:16:14:59 +0200] [Client 44] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:59 +0200] [Client 43] con->http=0x564494a61270
D [10/Oct/2022:16:14:59 +0200] [Client 43] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10329, response=0x564494a5c1f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:59 +0200] [Client 43] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:59 +0200] [Client 43] bytes=0, http_state=0, data_remaining=10329
D [10/Oct/2022:16:14:59 +0200] [Client 43] Flushing write buffer.
D [10/Oct/2022:16:14:59 +0200] [Client 43] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:59 +0200] [Client 43] Waiting for request.
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 41] con->http=0x564494a78210
D [10/Oct/2022:16:14:59 +0200] [Client 41] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a70b30(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:59 +0200] [Client 41] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:59 +0200] [Client 41] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:14:59 +0200] [Client 41] Flushing write buffer.
D [10/Oct/2022:16:14:59 +0200] [Client 41] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:59 +0200] [Client 41] Waiting for request.
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 44] con->http=0x564494a6a3b0
D [10/Oct/2022:16:14:59 +0200] [Client 44] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=112, response=0x564494a75a10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:59 +0200] [Client 44] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:59 +0200] [Client 44] bytes=0, http_state=0, data_remaining=112
D [10/Oct/2022:16:14:59 +0200] [Client 44] Flushing write buffer.
D [10/Oct/2022:16:14:59 +0200] [Client 44] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:59 +0200] [Client 44] Waiting for request.
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 44] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:59 +0200] [Client 44] Closing connection.
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 43] POST / HTTP/1.1
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 43] Read: status=200, state=6
D [10/Oct/2022:16:14:59 +0200] [Client 43] No authentication data provided.
D [10/Oct/2022:16:14:59 +0200] [Client 43] 2.0 CUPS-Get-Printers 36
D [10/Oct/2022:16:14:59 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:14:59 +0200] [Client 43] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:14:59 +0200] [Client 43] Content-Length: 3004
D [10/Oct/2022:16:14:59 +0200] [Client 43] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:59 +0200] [Client 43] con->http=0x564494a61270
D [10/Oct/2022:16:14:59 +0200] [Client 43] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x564494a70bc0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:59 +0200] [Client 43] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:59 +0200] [Client 43] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:16:14:59 +0200] [Client 43] Flushing write buffer.
D [10/Oct/2022:16:14:59 +0200] [Client 43] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:59 +0200] [Client 43] Waiting for request.
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:14:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:14:59 +0200] [Client 5] 2.0 Get-Notifications 54
D [10/Oct/2022:16:14:59 +0200] Get-Notifications /printers/
D [10/Oct/2022:16:14:59 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:14:59 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [10/Oct/2022:16:14:59 +0200] [Client 5] Content-Length: 127
D [10/Oct/2022:16:14:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:14:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564494a75a10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=127
D [10/Oct/2022:16:14:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:14:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 41] POST / HTTP/1.1
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 41] Read: status=200, state=6
D [10/Oct/2022:16:14:59 +0200] [Client 41] No authentication data provided.
D [10/Oct/2022:16:14:59 +0200] [Client 41] 2.0 Get-Jobs 37
D [10/Oct/2022:16:14:59 +0200] Get-Jobs ipp://localhost/printers/Brother_MFC_J5730DW
D [10/Oct/2022:16:14:59 +0200] [Client 41] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Brother_MFC_J5730DW) from localhost.
D [10/Oct/2022:16:14:59 +0200] [Client 41] Content-Length: 75
D [10/Oct/2022:16:14:59 +0200] [Client 41] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:59 +0200] [Client 41] con->http=0x564494a78210
D [10/Oct/2022:16:14:59 +0200] [Client 41] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a4c9d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:59 +0200] [Client 41] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:59 +0200] [Client 41] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:14:59 +0200] [Client 41] Flushing write buffer.
D [10/Oct/2022:16:14:59 +0200] [Client 41] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:59 +0200] [Client 41] Waiting for request.
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 43] POST / HTTP/1.1
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 43] Read: status=200, state=6
D [10/Oct/2022:16:14:59 +0200] [Client 43] No authentication data provided.
D [10/Oct/2022:16:14:59 +0200] [Client 43] 2.0 Get-Jobs 38
D [10/Oct/2022:16:14:59 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:16:14:59 +0200] [Client 43] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:14:59 +0200] [Client 43] Content-Length: 75
D [10/Oct/2022:16:14:59 +0200] [Client 43] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:59 +0200] [Client 41] POST / HTTP/1.1
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 41] Read: status=200, state=6
D [10/Oct/2022:16:14:59 +0200] [Client 41] No authentication data provided.
D [10/Oct/2022:16:14:59 +0200] [Client 41] 2.0 Get-Jobs 39
D [10/Oct/2022:16:14:59 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm
D [10/Oct/2022:16:14:59 +0200] Get-Jobs client-error-not-found: The printer or class does not exist.
D [10/Oct/2022:16:14:59 +0200] [Client 41] Returning IPP client-error-not-found for Get-Jobs (ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm) from localhost.
D [10/Oct/2022:16:14:59 +0200] [Client 41] Content-Length: 130
D [10/Oct/2022:16:14:59 +0200] [Client 41] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:14:59 +0200] [Client 43] con->http=0x564494a61270
D [10/Oct/2022:16:14:59 +0200] [Client 43] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a75a10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:59 +0200] [Client 43] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:59 +0200] [Client 43] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:14:59 +0200] [Client 43] Flushing write buffer.
D [10/Oct/2022:16:14:59 +0200] [Client 43] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:59 +0200] [Client 43] Waiting for request.
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 41] con->http=0x564494a78210
D [10/Oct/2022:16:14:59 +0200] [Client 41] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=130, response=0x564494a6e110(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:14:59 +0200] [Client 41] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:14:59 +0200] [Client 41] bytes=0, http_state=0, data_remaining=130
D [10/Oct/2022:16:14:59 +0200] [Client 41] Flushing write buffer.
D [10/Oct/2022:16:14:59 +0200] [Client 41] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:14:59 +0200] [Client 41] Waiting for request.
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 41] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:59 +0200] [Client 41] Closing connection.
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:14:59 +0200] [Client 43] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:14:59 +0200] [Client 43] Closing connection.
D [10/Oct/2022:16:14:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [10/Oct/2022:16:15:00 +0200] Expiring subscriptions...
I [10/Oct/2022:16:15:27 +0200] Saving job.cache...
I [10/Oct/2022:16:15:27 +0200] Saving subscriptions.conf...
D [10/Oct/2022:16:15:27 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [10/Oct/2022:16:15:27 +0200] Expiring subscriptions...
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:15:59 +0200] [Client 45] Server address is "192.168.1.93".
D [10/Oct/2022:16:15:59 +0200] [Client 45] Accepted from 192.168.1.65:34846 (IPv4)
D [10/Oct/2022:16:15:59 +0200] [Client 45] Waiting for request.
I [10/Oct/2022:16:15:59 +0200] Expiring subscriptions...
D [10/Oct/2022:16:15:59 +0200] Report: clients=6
D [10/Oct/2022:16:15:59 +0200] Report: jobs=459
D [10/Oct/2022:16:15:59 +0200] Report: jobs-active=0
D [10/Oct/2022:16:15:59 +0200] Report: printers=2
D [10/Oct/2022:16:15:59 +0200] Report: stringpool-string-count=2933
D [10/Oct/2022:16:15:59 +0200] Report: stringpool-alloc-bytes=14344
D [10/Oct/2022:16:15:59 +0200] Report: stringpool-total-bytes=60112
D [10/Oct/2022:16:15:59 +0200] [Client 45] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] cupsdNetIFUpdate: Ignoring "lo".
D [10/Oct/2022:16:15:59 +0200] cupsdNetIFUpdate: Ignoring "eno1".
D [10/Oct/2022:16:15:59 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [10/Oct/2022:16:15:59 +0200] cupsdNetIFUpdate: "eno1" = 192.168.1.93:631
D [10/Oct/2022:16:15:59 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [10/Oct/2022:16:15:59 +0200] cupsdNetIFUpdate: "eno1" = [v1.fe80::16c9:44a7:b32f:3577+eno1]:631
D [10/Oct/2022:16:15:59 +0200] [Client 45] 2.0 Get-Printer-Attributes 1
D [10/Oct/2022:16:15:59 +0200] Get-Printer-Attributes ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:15:59 +0200] [Client 45] Returning IPP successful-ok for Get-Printer-Attributes (ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:15:59 +0200] [Client 45] Content-Length: 1863
D [10/Oct/2022:16:15:59 +0200] [Client 45] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 45] con->http=0x564494a61270
D [10/Oct/2022:16:15:59 +0200] [Client 45] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1863, response=0x564494a2bf40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 45] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 45] bytes=0, http_state=0, data_remaining=1863
D [10/Oct/2022:16:15:59 +0200] [Client 45] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 45] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 45] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:16:15:59 +0200] [Client 45] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 45] 2.0 Validate-Job 2
D [10/Oct/2022:16:15:59 +0200] Validate-Job ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:15:59 +0200] [Client 45] Returning IPP successful-ok for Validate-Job (ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:15:59 +0200] [Client 45] Content-Length: 75
D [10/Oct/2022:16:15:59 +0200] [Client 45] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 45] con->http=0x564494a61270
D [10/Oct/2022:16:15:59 +0200] [Client 45] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a4c9d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 45] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 45] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:15:59 +0200] [Client 45] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 45] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 45] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:16:15:59 +0200] [Client 45] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] 2.0 Create-Job 3
D [10/Oct/2022:16:15:59 +0200] Create-Job ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [10/Oct/2022:16:15:59 +0200] [Job 505] Applying default options...
D [10/Oct/2022:16:15:59 +0200] add_job: requesting-user-name="isaric"
D [10/Oct/2022:16:15:59 +0200] Adding default job-sheets values "none,none"...
I [10/Oct/2022:16:15:59 +0200] [Job 505] Adding start banner page "none".
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [10/Oct/2022:16:15:59 +0200] [Job 505] Queued on "DCPL2500D" by "isaric".
D [10/Oct/2022:16:15:59 +0200] [Client 45] Returning IPP successful-ok for Create-Job (ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:15:59 +0200] [Client 45] Content-Length: 219
D [10/Oct/2022:16:15:59 +0200] [Client 45] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 45] con->http=0x564494a61270
D [10/Oct/2022:16:15:59 +0200] [Client 45] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=219, response=0x564494a2bf90(IPP_STATE_IDLE), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 45] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 45] bytes=0, http_state=0, data_remaining=219
D [10/Oct/2022:16:15:59 +0200] [Client 45] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 45] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 45] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] JobCreated
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 5] 2.0 Get-Notifications 55
D [10/Oct/2022:16:15:59 +0200] Get-Notifications /printers/
D [10/Oct/2022:16:15:59 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 5] Content-Length: 679
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=679, response=0x564494a70980(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=679
D [10/Oct/2022:16:15:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 46] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:15:59 +0200] [Client 46] Accepted from localhost (Domain)
D [10/Oct/2022:16:15:59 +0200] [Client 46] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] [Client 46] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 46] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 46] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 46] 2.0 Get-Job-Attributes 40
D [10/Oct/2022:16:15:59 +0200] Get-Job-Attributes ipp://localhost/jobs/505
D [10/Oct/2022:16:15:59 +0200] [Client 46] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/505) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 46] Content-Length: 166
D [10/Oct/2022:16:15:59 +0200] [Client 46] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 46] con->http=0x564494a691f0
D [10/Oct/2022:16:15:59 +0200] [Client 46] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=166, response=0x564494a72b50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 46] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 46] bytes=0, http_state=0, data_remaining=166
D [10/Oct/2022:16:15:59 +0200] [Client 46] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 46] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 46] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 47] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:15:59 +0200] [Client 47] Accepted from localhost (Domain)
D [10/Oct/2022:16:15:59 +0200] [Client 47] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] [Client 47] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 47] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 47] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 47] 2.0 Get-Job-Attributes 56
D [10/Oct/2022:16:15:59 +0200] Get-Job-Attributes ipp://localhost/jobs/505
D [10/Oct/2022:16:15:59 +0200] [Client 47] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/505) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 47] Content-Length: 112
D [10/Oct/2022:16:15:59 +0200] [Client 47] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 47] con->http=0x564494a75550
D [10/Oct/2022:16:15:59 +0200] [Client 47] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=112, response=0x564494a5c1b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 47] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 47] bytes=0, http_state=0, data_remaining=112
D [10/Oct/2022:16:15:59 +0200] [Client 47] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 47] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 47] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 46] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 46] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 46] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 46] 2.0 Get-Jobs 41
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:16:15:59 +0200] [Client 46] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 46] Content-Length: 354
D [10/Oct/2022:16:15:59 +0200] [Client 46] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 47] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:15:59 +0200] [Client 47] Closing connection.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 46] con->http=0x564494a691f0
D [10/Oct/2022:16:15:59 +0200] [Client 46] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=354, response=0x564494a5c200(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 46] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 46] bytes=0, http_state=0, data_remaining=354
D [10/Oct/2022:16:15:59 +0200] [Client 46] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 46] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 46] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 46] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 46] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 46] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 46] 2.0 Get-Job-Attributes 42
D [10/Oct/2022:16:15:59 +0200] Get-Job-Attributes ipp://localhost/jobs/505
D [10/Oct/2022:16:15:59 +0200] [Client 46] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/505) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 46] Content-Length: 102
D [10/Oct/2022:16:15:59 +0200] [Client 46] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 46] con->http=0x564494a691f0
D [10/Oct/2022:16:15:59 +0200] [Client 46] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=102, response=0x564494a2bf90(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 46] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 46] bytes=0, http_state=0, data_remaining=102
D [10/Oct/2022:16:15:59 +0200] [Client 46] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 46] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 46] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 45] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] 2.0 Send-Document 4
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 48] Server address is "192.168.1.93".
D [10/Oct/2022:16:15:59 +0200] [Client 48] Accepted from 192.168.1.65:34852 (IPv4)
D [10/Oct/2022:16:15:59 +0200] [Client 48] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] 2.0 Get-Printer-Attributes 5
D [10/Oct/2022:16:15:59 +0200] Get-Printer-Attributes ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:15:59 +0200] [Client 48] Returning IPP successful-ok for Get-Printer-Attributes (ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:15:59 +0200] [Client 48] Content-Length: 1863
D [10/Oct/2022:16:15:59 +0200] [Client 48] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 48] con->http=0x564494a75550
D [10/Oct/2022:16:15:59 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1863, response=0x564494a74f20(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 48] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 48] bytes=0, http_state=0, data_remaining=1863
D [10/Oct/2022:16:15:59 +0200] [Client 48] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 48] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 48] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] Send-Document ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:15:59 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [10/Oct/2022:16:15:59 +0200] [Job 505] File of type application/vnd.cups-raster queued by "isaric".
I [10/Oct/2022:16:15:59 +0200] [Job 505] Adding end banner page "none".
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Job 505] time-at-processing=1665411359
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Job 505] 4 filters for job:
D [10/Oct/2022:16:15:59 +0200] [Job 505] rastertopwg (application/vnd.cups-raster to image/urf, cost 100)
D [10/Oct/2022:16:15:59 +0200] [Job 505] rastertopdf (image/urf to application/pdf, cost 0)
D [10/Oct/2022:16:15:59 +0200] [Job 505] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [10/Oct/2022:16:15:59 +0200] [Job 505] brother_lpdwrapper_DCPL2500D (application/vnd.cups-pdf to printer/DCPL2500D, cost 0)
D [10/Oct/2022:16:15:59 +0200] [Job 505] job-sheets=none,none
D [10/Oct/2022:16:15:59 +0200] [Job 505] argv[0]="DCPL2500D"
D [10/Oct/2022:16:15:59 +0200] [Job 505] argv[1]="505"
D [10/Oct/2022:16:15:59 +0200] [Job 505] argv[2]="isaric"
D [10/Oct/2022:16:15:59 +0200] [Job 505] argv[3]="https://doc.ubuntu-fr.org/cups"
D [10/Oct/2022:16:15:59 +0200] [Job 505] argv[4]="1"
D [10/Oct/2022:16:15:59 +0200] [Job 505] argv[5]="job-uuid=urn:uuid:7387edaf-9ce3-37d4-5846-275cfa00a33a job-originating-host-name=192.168.1.65 date-time-at-creation= date-time-at-processing= time-at-creation=1665411359 time-at-processing=1665411359"
D [10/Oct/2022:16:15:59 +0200] [Job 505] argv[6]="/var/spool/cups/d00505-001"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[3]="CUPS_REQUESTROOT=/var/spool/cups"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[4]="CUPS_SERVERBIN=/usr/lib/cups"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[5]="CUPS_SERVERROOT=/etc/cups"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[6]="CUPS_STATEDIR=/run/cups"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[7]="HOME=/var/spool/cups/tmp"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[9]="SERVER_ADMIN=root@isaric-p6-2007frm"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[10]="SOFTWARE=CUPS/2.4.1"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[11]="TMPDIR=/var/spool/cups/tmp"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[12]="USER=root"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[13]="CUPS_MAX_MESSAGE=2047"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[14]="CUPS_SERVER=/run/cups/cups.sock"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[16]="IPP_PORT=631"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[17]="CHARSET=utf-8"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[18]="LANG=fr_FR.UTF-8"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[19]="PPD=/etc/cups/ppd/DCPL2500D.ppd"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[20]="CONTENT_TYPE=application/vnd.cups-raster"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[21]="DEVICE_URI=usb://Brother/DCP-L2500D%20series?serial=E73908D7N915582"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[22]="PRINTER_INFO=DCPL2500D"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[23]="PRINTER_LOCATION="
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[24]="PRINTER=DCPL2500D"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[25]="PRINTER_STATE_REASONS=none"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[26]="CUPS_FILETYPE=document"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-pdf"
D [10/Oct/2022:16:15:59 +0200] [Job 505] envp[28]="AUTH_I****"
I [10/Oct/2022:16:15:59 +0200] [Job 505] Started filter /usr/lib/cups/filter/rastertopwg (PID 26280)
I [10/Oct/2022:16:15:59 +0200] [Job 505] Started filter /usr/lib/cups/filter/rastertopdf (PID 26281)
I [10/Oct/2022:16:15:59 +0200] [Job 505] Started filter /usr/lib/cups/filter/pdftopdf (PID 26282)
I [10/Oct/2022:16:15:59 +0200] [Job 505] Started filter /usr/lib/cups/filter/brother_lpdwrapper_DCPL2500D (PID 26283)
I [10/Oct/2022:16:15:59 +0200] [Job 505] Started backend /usr/lib/cups/backend/usb (PID 26284)
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 45] Returning IPP successful-ok for Send-Document (ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:15:59 +0200] [Client 45] Content-Length: 189
D [10/Oct/2022:16:15:59 +0200] [Client 45] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Job 505] PID 26280 (/usr/lib/cups/filter/rastertopwg) exited with no errors.
D [10/Oct/2022:16:15:59 +0200] [Job 505] PID 26281 (/usr/lib/cups/filter/rastertopdf) exited with no errors.
D [10/Oct/2022:16:15:59 +0200] [Job 505] PID 26282 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [10/Oct/2022:16:15:59 +0200] [Client 45] con->http=0x564494a61270
D [10/Oct/2022:16:15:59 +0200] [Client 45] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=189, response=0x564494a74f20(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 45] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 45] bytes=0, http_state=0, data_remaining=189
D [10/Oct/2022:16:15:59 +0200] [Client 45] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 45] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 45] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] PrinterStateChanged
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Client 48] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 48] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 48] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 48] 2.0 Get-Job-Attributes 6
D [10/Oct/2022:16:15:59 +0200] Get-Job-Attributes ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:15:59 +0200] [Client 48] Returning IPP successful-ok for Get-Job-Attributes (ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:15:59 +0200] [Client 48] Content-Length: 291
D [10/Oct/2022:16:15:59 +0200] [Client 48] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 5] 2.0 Get-Notifications 57
D [10/Oct/2022:16:15:59 +0200] Get-Notifications /printers/
D [10/Oct/2022:16:15:59 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 5] Content-Length: 1113
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 49] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:15:59 +0200] [Client 49] Accepted from localhost (Domain)
D [10/Oct/2022:16:15:59 +0200] [Client 49] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] [Job 505] OUTFORMAT=\"<none>\", output format will be PDF
D [10/Oct/2022:16:15:59 +0200] [Job 505] Color Manager: Calibration Mode/Off
D [10/Oct/2022:16:15:59 +0200] [Job 505] Calling FindDeviceById(cups-DCPL2500D)
D [10/Oct/2022:16:15:59 +0200] [Job 505] Found device /org/freedesktop/ColorManager/devices/cups_DCPL2500D
D [10/Oct/2022:16:15:59 +0200] [Job 505] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [10/Oct/2022:16:15:59 +0200] [Job 505] Input is empty, outputting empty file.
D [10/Oct/2022:16:15:59 +0200] [Job 505] pdftopdf: Last filter determined by the PPD: brother_lpdwrapper_DCPL2500D; FINAL_CONTENT_TYPE: application/vnd.cups-pdf => pdftopdf will not log pages in page_log.
D [10/Oct/2022:16:15:59 +0200] [Job 505] Input is empty, outputting empty file.
D [10/Oct/2022:16:15:59 +0200] [Client 48] con->http=0x564494a75550
D [10/Oct/2022:16:15:59 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=291, response=0x564494a70980(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 48] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 48] bytes=0, http_state=0, data_remaining=291
D [10/Oct/2022:16:15:59 +0200] [Client 48] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 48] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 48] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1113, response=0x564494a7aa80(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=1113
D [10/Oct/2022:16:15:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 49] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 49] 2.0 CUPS-Get-Default 43
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Default
D [10/Oct/2022:16:15:59 +0200] [Client 49] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 49] Content-Length: 10329
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 49] con->http=0x564494a7c580
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10329, response=0x564494a74da0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 49] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 49] bytes=0, http_state=0, data_remaining=10329
D [10/Oct/2022:16:15:59 +0200] [Client 49] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 49] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 49] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 50] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:15:59 +0200] [Client 50] Accepted from localhost (Domain)
D [10/Oct/2022:16:15:59 +0200] [Client 50] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] JobState
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Client 50] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 50] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 50] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 50] 2.0 Get-Job-Attributes 58
D [10/Oct/2022:16:15:59 +0200] Get-Job-Attributes ipp://localhost/jobs/505
D [10/Oct/2022:16:15:59 +0200] [Client 50] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/505) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 50] Content-Length: 112
D [10/Oct/2022:16:15:59 +0200] [Client 50] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 50] con->http=0x564494a80ed0
D [10/Oct/2022:16:15:59 +0200] [Client 50] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=112, response=0x564494a74da0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 50] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 50] bytes=0, http_state=0, data_remaining=112
D [10/Oct/2022:16:15:59 +0200] [Client 50] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 50] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 50] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 49] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 49] 2.0 CUPS-Get-Printers 44
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:15:59 +0200] [Client 49] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 49] Content-Length: 3004
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 49] con->http=0x564494a7c580
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x564494a70980(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 49] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 49] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:16:15:59 +0200] [Client 49] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 49] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 49] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 50] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:15:59 +0200] [Client 50] Closing connection.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 45] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 45] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 45] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 45] 2.0 Get-Printer-Attributes 7
D [10/Oct/2022:16:15:59 +0200] Get-Printer-Attributes ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:15:59 +0200] [Client 45] Returning IPP successful-ok for Get-Printer-Attributes (ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:15:59 +0200] [Client 45] Content-Length: 1863
D [10/Oct/2022:16:15:59 +0200] [Client 45] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 45] con->http=0x564494a61270
D [10/Oct/2022:16:15:59 +0200] [Client 45] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1863, response=0x564494a7b370(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 45] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 45] bytes=0, http_state=0, data_remaining=1863
D [10/Oct/2022:16:15:59 +0200] [Client 45] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 45] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 45] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Job 505] Loading USB quirks from \"/usr/share/cups/usb\".
D [10/Oct/2022:16:15:59 +0200] [Job 505] Loaded 118 quirks.
D [10/Oct/2022:16:15:59 +0200] [Job 505] Printing on printer with URI: usb://Brother/DCP-L2500D%20series?serial=E73908D7N915582
D [10/Oct/2022:16:15:59 +0200] [Client 45] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:15:59 +0200] [Client 45] Closing connection.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Job 505] libusb_get_device_list=9
D [10/Oct/2022:16:15:59 +0200] [Job 505] STATE: +connecting-to-device
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] PrinterStateChanged
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Job 505] STATE: -connecting-to-device
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 51] Server address is "192.168.1.93".
D [10/Oct/2022:16:15:59 +0200] [Client 51] Accepted from 192.168.1.65:34864 (IPv4)
D [10/Oct/2022:16:15:59 +0200] [Client 51] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] [Client 51] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 51] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 51] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 51] 2.0 Get-Job-Attributes 8
D [10/Oct/2022:16:15:59 +0200] Get-Job-Attributes ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:15:59 +0200] [Client 51] Returning IPP successful-ok for Get-Job-Attributes (ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:15:59 +0200] [Client 51] Content-Length: 291
D [10/Oct/2022:16:15:59 +0200] [Client 51] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 51] con->http=0x564494a7fe20
D [10/Oct/2022:16:15:59 +0200] [Client 51] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=291, response=0x564494a53e30(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 51] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 51] bytes=0, http_state=0, data_remaining=291
D [10/Oct/2022:16:15:59 +0200] [Client 51] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 51] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 51] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Job 505] Device protocol: 2
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] PrinterStateChanged
D [10/Oct/2022:16:15:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 5] 2.0 Get-Notifications 59
D [10/Oct/2022:16:15:59 +0200] Get-Notifications /printers/
D [10/Oct/2022:16:15:59 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 5] Content-Length: 985
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 46] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 46] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 46] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 46] 2.0 CUPS-Get-Default 45
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Default
D [10/Oct/2022:16:15:59 +0200] [Client 46] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 46] Content-Length: 10329
D [10/Oct/2022:16:15:59 +0200] [Client 46] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=985, response=0x564494a74f70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=985
D [10/Oct/2022:16:15:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 46] con->http=0x564494a691f0
D [10/Oct/2022:16:15:59 +0200] [Client 46] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10329, response=0x564494a547f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 46] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 46] bytes=0, http_state=0, data_remaining=10329
D [10/Oct/2022:16:15:59 +0200] [Client 46] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 46] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 46] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 52] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:15:59 +0200] [Client 52] Accepted from localhost (Domain)
D [10/Oct/2022:16:15:59 +0200] [Client 52] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 5] 2.0 CUPS-Get-Default 60
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Default
D [10/Oct/2022:16:15:59 +0200] [Client 5] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 5] Content-Length: 10329
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 52] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 52] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 52] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 52] 2.0 CUPS-Get-Default 46
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Default
D [10/Oct/2022:16:15:59 +0200] [Client 52] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 52] Content-Length: 10329
D [10/Oct/2022:16:15:59 +0200] [Client 52] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10329, response=0x564494a53d00(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=10329
D [10/Oct/2022:16:15:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 52] con->http=0x564494a85450
D [10/Oct/2022:16:15:59 +0200] [Client 52] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10329, response=0x564494a89850(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 52] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 52] bytes=0, http_state=0, data_remaining=10329
D [10/Oct/2022:16:15:59 +0200] [Client 52] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 52] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 52] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 5] 2.0 CUPS-Get-Printers 61
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:15:59 +0200] [Client 5] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 5] Content-Length: 3004
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 46] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 46] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 46] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 46] 2.0 CUPS-Get-Printers 47
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:15:59 +0200] [Client 46] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 46] Content-Length: 3004
D [10/Oct/2022:16:15:59 +0200] [Client 46] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x564494a89780(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:16:15:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 46] con->http=0x564494a691f0
D [10/Oct/2022:16:15:59 +0200] [Client 46] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x564494a64980(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 46] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 46] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:16:15:59 +0200] [Client 46] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 46] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 46] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Job 505] Sending data to printer.
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Job 505] Set job-printer-state-message to "Sending data to printer.", current level=INFO
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 52] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 52] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 52] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 52] 2.0 CUPS-Get-Printers 48
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:15:59 +0200] [Client 52] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 52] Content-Length: 3004
D [10/Oct/2022:16:15:59 +0200] [Client 52] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] PrinterStateChanged
D [10/Oct/2022:16:15:59 +0200] [Client 52] con->http=0x564494a85450
D [10/Oct/2022:16:15:59 +0200] [Client 52] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x564494a84440(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 52] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 52] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:16:15:59 +0200] [Client 52] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 52] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 52] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 53] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:15:59 +0200] [Client 53] Accepted from localhost (Domain)
D [10/Oct/2022:16:15:59 +0200] [Client 53] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] [Client 53] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 53] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 53] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 53] 2.0 CUPS-Get-Default 49
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Default
D [10/Oct/2022:16:15:59 +0200] [Client 53] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 53] Content-Length: 10353
D [10/Oct/2022:16:15:59 +0200] [Client 53] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 53] con->http=0x564494a8bf70
D [10/Oct/2022:16:15:59 +0200] [Client 53] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10353, response=0x564494a84440(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 53] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 53] bytes=0, http_state=0, data_remaining=10353
D [10/Oct/2022:16:15:59 +0200] [Client 53] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 53] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 53] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 53] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 53] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 53] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 53] 2.0 CUPS-Get-Printers 50
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:15:59 +0200] [Client 53] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 53] Content-Length: 3004
D [10/Oct/2022:16:15:59 +0200] [Client 53] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 53] con->http=0x564494a8bf70
D [10/Oct/2022:16:15:59 +0200] [Client 53] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x564494a83ad0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 53] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 53] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:16:15:59 +0200] [Client 53] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 53] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 53] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 49] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 49] 2.0 Get-Jobs 51
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/Brother_MFC_J5730DW
D [10/Oct/2022:16:15:59 +0200] [Client 49] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Brother_MFC_J5730DW) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 49] Content-Length: 75
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 54] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:15:59 +0200] [Client 54] Accepted from localhost (Domain)
D [10/Oct/2022:16:15:59 +0200] [Client 54] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] [Client 49] con->http=0x564494a7c580
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a84440(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 49] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 49] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:15:59 +0200] [Client 49] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 49] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 49] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 54] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 49] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] 2.0 Get-Jobs 53
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm
D [10/Oct/2022:16:15:59 +0200] Get-Jobs client-error-not-found: The printer or class does not exist.
D [10/Oct/2022:16:15:59 +0200] [Client 49] Returning IPP client-error-not-found for Get-Jobs (ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 49] Content-Length: 130
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 49] con->http=0x564494a7c580
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=130, response=0x564494a64550(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 49] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 49] bytes=0, http_state=0, data_remaining=130
D [10/Oct/2022:16:15:59 +0200] [Client 49] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 49] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 49] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=100, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] 2.0 Get-Jobs 52
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:16:15:59 +0200] [Client 54] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 54] Content-Length: 405
D [10/Oct/2022:16:15:59 +0200] [Client 54] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 54] con->http=0x564494a90890
D [10/Oct/2022:16:15:59 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=405, response=0x564494a64550(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 54] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 54] bytes=0, http_state=0, data_remaining=405
D [10/Oct/2022:16:15:59 +0200] [Client 54] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 54] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 54] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 5] 2.0 CUPS-Get-Default 62
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Default
D [10/Oct/2022:16:15:59 +0200] [Client 5] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 5] Content-Length: 10353
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10353, response=0x564494a89730(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=10353
D [10/Oct/2022:16:15:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 49] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 49] 2.0 Get-Jobs 54
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/Brother_MFC_J5730DW
D [10/Oct/2022:16:15:59 +0200] [Client 49] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Brother_MFC_J5730DW) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 49] Content-Length: 75
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 54] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 54] 2.0 Get-Jobs 55
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:16:15:59 +0200] [Client 54] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 54] Content-Length: 405
D [10/Oct/2022:16:15:59 +0200] [Client 54] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 55] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:15:59 +0200] [Client 55] Accepted from localhost (Domain)
D [10/Oct/2022:16:15:59 +0200] [Client 55] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] [Client 49] con->http=0x564494a7c580
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a8bee0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 49] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 49] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:15:59 +0200] [Client 49] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 49] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 49] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 54] con->http=0x564494a90890
D [10/Oct/2022:16:15:59 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=405, response=0x564494a84440(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 54] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 54] bytes=0, http_state=0, data_remaining=405
D [10/Oct/2022:16:15:59 +0200] [Client 54] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 54] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 54] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 55] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 55] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 55] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 55] 2.0 Get-Jobs 56
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm
D [10/Oct/2022:16:15:59 +0200] Get-Jobs client-error-not-found: The printer or class does not exist.
D [10/Oct/2022:16:15:59 +0200] [Client 55] Returning IPP client-error-not-found for Get-Jobs (ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 55] Content-Length: 130
D [10/Oct/2022:16:15:59 +0200] [Client 55] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 55] con->http=0x564494a95530
D [10/Oct/2022:16:15:59 +0200] [Client 55] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=130, response=0x564494a8bee0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 55] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 55] bytes=0, http_state=0, data_remaining=130
D [10/Oct/2022:16:15:59 +0200] [Client 55] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 55] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 55] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 5] 2.0 CUPS-Get-Printers 63
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:15:59 +0200] [Client 5] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 5] Content-Length: 3004
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x564494a84440(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:16:15:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 56] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:15:59 +0200] [Client 56] Accepted from localhost (Domain)
D [10/Oct/2022:16:15:59 +0200] [Client 56] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] [Client 49] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 49] 2.0 Get-Jobs 58
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:16:15:59 +0200] [Client 49] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 49] Content-Length: 405
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 54] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 54] 2.0 Get-Jobs 59
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm
D [10/Oct/2022:16:15:59 +0200] Get-Jobs client-error-not-found: The printer or class does not exist.
D [10/Oct/2022:16:15:59 +0200] [Client 54] Returning IPP client-error-not-found for Get-Jobs (ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 54] Content-Length: 130
D [10/Oct/2022:16:15:59 +0200] [Client 54] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 55] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 55] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 55] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 55] 2.0 Get-Jobs 60
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/Brother_MFC_J5730DW
D [10/Oct/2022:16:15:59 +0200] [Client 55] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Brother_MFC_J5730DW) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 55] Content-Length: 75
D [10/Oct/2022:16:15:59 +0200] [Client 55] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 52] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 52] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 52] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 52] 2.0 Get-Jobs 61
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:16:15:59 +0200] [Client 52] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 52] Content-Length: 405
D [10/Oct/2022:16:15:59 +0200] [Client 52] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 46] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 46] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 46] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 46] 2.0 Get-Jobs 62
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm
D [10/Oct/2022:16:15:59 +0200] Get-Jobs client-error-not-found: The printer or class does not exist.
D [10/Oct/2022:16:15:59 +0200] [Client 46] Returning IPP client-error-not-found for Get-Jobs (ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 46] Content-Length: 130
D [10/Oct/2022:16:15:59 +0200] [Client 46] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 49] con->http=0x564494a7c580
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=405, response=0x564494a63d80(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 49] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 49] bytes=0, http_state=0, data_remaining=405
D [10/Oct/2022:16:15:59 +0200] [Client 49] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 49] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 49] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 54] con->http=0x564494a90890
D [10/Oct/2022:16:15:59 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=130, response=0x564494a891e0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 54] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 54] bytes=0, http_state=0, data_remaining=130
D [10/Oct/2022:16:15:59 +0200] [Client 54] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 54] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 54] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 55] con->http=0x564494a95530
D [10/Oct/2022:16:15:59 +0200] [Client 55] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a642d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 55] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 55] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:15:59 +0200] [Client 55] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 55] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 55] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 52] con->http=0x564494a85450
D [10/Oct/2022:16:15:59 +0200] [Client 52] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=405, response=0x564494a94130(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 52] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 52] bytes=0, http_state=0, data_remaining=405
D [10/Oct/2022:16:15:59 +0200] [Client 52] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 52] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 52] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 46] con->http=0x564494a691f0
D [10/Oct/2022:16:15:59 +0200] [Client 46] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=130, response=0x564494a54220(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 46] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 46] bytes=0, http_state=0, data_remaining=130
D [10/Oct/2022:16:15:59 +0200] [Client 46] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 46] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 46] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 56] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 56] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 56] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 56] 2.0 Get-Jobs 57
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/Brother_MFC_J5730DW
D [10/Oct/2022:16:15:59 +0200] [Client 56] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Brother_MFC_J5730DW) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 56] Content-Length: 75
D [10/Oct/2022:16:15:59 +0200] [Client 56] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 56] con->http=0x564494a99e50
D [10/Oct/2022:16:15:59 +0200] [Client 56] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a89bd0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 56] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 56] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:15:59 +0200] [Client 56] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 56] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 56] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 5] 2.0 Get-Notifications 64
D [10/Oct/2022:16:15:59 +0200] Get-Notifications /printers/
D [10/Oct/2022:16:15:59 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 5] Content-Length: 548
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=548, response=0x564494a54220(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=548
D [10/Oct/2022:16:15:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 5] 2.0 CUPS-Get-Default 65
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Default
D [10/Oct/2022:16:15:59 +0200] [Client 5] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 5] Content-Length: 10353
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10353, response=0x564494a64550(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=10353
D [10/Oct/2022:16:15:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 5] 2.0 CUPS-Get-Printers 66
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:15:59 +0200] [Client 5] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 5] Content-Length: 3004
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x564494a63900(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:16:15:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Job 505] Read 346 bytes of print data...
D [10/Oct/2022:16:15:59 +0200] [Job 505] Wrote 346 bytes of print data...
D [10/Oct/2022:16:15:59 +0200] [Job 505] Sent 346 bytes...
D [10/Oct/2022:16:15:59 +0200] [Job 505] Waiting for read thread to exit...
D [10/Oct/2022:16:15:59 +0200] [Job 505] PID 26283 (/usr/lib/cups/filter/brother_lpdwrapper_DCPL2500D) exited with no errors.
D [10/Oct/2022:16:15:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 5] 2.0 Get-Notifications 67
D [10/Oct/2022:16:15:59 +0200] Get-Notifications /printers/
D [10/Oct/2022:16:15:59 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 5] Content-Length: 127
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564494a63900(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=127
D [10/Oct/2022:16:15:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 5] 2.0 Get-Notifications 68
D [10/Oct/2022:16:15:59 +0200] Get-Notifications /printers/
D [10/Oct/2022:16:15:59 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 5] Content-Length: 127
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564494a79e80(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=127
D [10/Oct/2022:16:15:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Job 505] PID 26284 (/usr/lib/cups/backend/usb) exited with no errors.
D [10/Oct/2022:16:15:59 +0200] [Job 505] time-at-completed=1665411359
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
I [10/Oct/2022:16:15:59 +0200] [Job 505] Job completed.
I [10/Oct/2022:16:15:59 +0200] Expiring subscriptions...
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdMarkDirty(---J-)
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] JobCompleted
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] PrinterStateChanged
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Notifier] state=3
D [10/Oct/2022:16:15:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Printing jobs and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 5] 2.0 Get-Notifications 69
D [10/Oct/2022:16:15:59 +0200] Get-Notifications /printers/
D [10/Oct/2022:16:15:59 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 5] Content-Length: 1114
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1114, response=0x564494a83f50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=1114
D [10/Oct/2022:16:15:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 57] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:15:59 +0200] [Client 57] Accepted from localhost (Domain)
D [10/Oct/2022:16:15:59 +0200] [Client 57] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] [Client 57] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 57] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 57] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 57] 2.0 Get-Job-Attributes 70
D [10/Oct/2022:16:15:59 +0200] Get-Job-Attributes ipp://localhost/jobs/505
D [10/Oct/2022:16:15:59 +0200] [Client 57] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/505) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 57] Content-Length: 112
D [10/Oct/2022:16:15:59 +0200] [Client 57] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 57] con->http=0x564494a9e770
D [10/Oct/2022:16:15:59 +0200] [Client 57] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=112, response=0x564494a723b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 57] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 57] bytes=0, http_state=0, data_remaining=112
D [10/Oct/2022:16:15:59 +0200] [Client 57] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 57] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 57] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 57] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:15:59 +0200] [Client 57] Closing connection.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 53] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 53] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 53] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 53] 2.0 Get-Job-Attributes 63
D [10/Oct/2022:16:15:59 +0200] Get-Job-Attributes ipp://localhost/jobs/505
D [10/Oct/2022:16:15:59 +0200] [Client 53] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/505) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 53] Content-Length: 166
D [10/Oct/2022:16:15:59 +0200] [Client 53] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 49] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 49] 2.0 CUPS-Get-Default 64
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Default
D [10/Oct/2022:16:15:59 +0200] [Client 49] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 49] Content-Length: 10329
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 53] con->http=0x564494a8bf70
D [10/Oct/2022:16:15:59 +0200] [Client 53] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=166, response=0x564494a83f90(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 53] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 53] bytes=0, http_state=0, data_remaining=166
D [10/Oct/2022:16:15:59 +0200] [Client 53] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 53] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 53] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 49] con->http=0x564494a7c580
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10329, response=0x564494a840a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 49] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 49] bytes=0, http_state=0, data_remaining=10329
D [10/Oct/2022:16:15:59 +0200] [Client 49] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 49] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 49] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 49] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 49] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 49] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 49] 2.0 CUPS-Get-Printers 65
D [10/Oct/2022:16:15:59 +0200] CUPS-Get-Printers
D [10/Oct/2022:16:15:59 +0200] [Client 49] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 49] Content-Length: 3004
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 54] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 54] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 54] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 54] 2.0 Get-Jobs 66
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:16:15:59 +0200] [Client 54] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 54] Content-Length: 75
D [10/Oct/2022:16:15:59 +0200] [Client 54] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 49] con->http=0x564494a7c580
D [10/Oct/2022:16:15:59 +0200] [Client 49] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x564494a84160(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 49] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 49] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:16:15:59 +0200] [Client 49] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 49] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 49] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 54] con->http=0x564494a90890
D [10/Oct/2022:16:15:59 +0200] [Client 54] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a88ea0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 54] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 54] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:15:59 +0200] [Client 54] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 54] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 54] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 5] 2.0 Get-Notifications 71
D [10/Oct/2022:16:15:59 +0200] Get-Notifications /printers/
D [10/Oct/2022:16:15:59 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:15:59 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/printers/) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 5] Content-Length: 127
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] con->http=0x564494a4e230
D [10/Oct/2022:16:15:59 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x564494a83ee0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 5] bytes=0, http_state=0, data_remaining=127
D [10/Oct/2022:16:15:59 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 55] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 55] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 55] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 55] 2.0 Get-Jobs 67
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/Brother_MFC_J5730DW
D [10/Oct/2022:16:15:59 +0200] [Client 55] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/Brother_MFC_J5730DW) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 55] Content-Length: 75
D [10/Oct/2022:16:15:59 +0200] [Client 55] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 55] con->http=0x564494a95530
D [10/Oct/2022:16:15:59 +0200] [Client 55] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a71930(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 55] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 55] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:15:59 +0200] [Client 55] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 55] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 55] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 46] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 46] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 46] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 46] 2.0 Get-Jobs 68
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:16:15:59 +0200] [Client 46] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 46] Content-Length: 75
D [10/Oct/2022:16:15:59 +0200] [Client 46] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 46] con->http=0x564494a691f0
D [10/Oct/2022:16:15:59 +0200] [Client 46] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a83ee0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 46] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 46] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:15:59 +0200] [Client 46] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 46] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 46] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 52] POST / HTTP/1.1
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:15:59 +0200] [Client 52] Read: status=200, state=6
D [10/Oct/2022:16:15:59 +0200] [Client 52] No authentication data provided.
D [10/Oct/2022:16:15:59 +0200] [Client 52] 2.0 Get-Jobs 69
D [10/Oct/2022:16:15:59 +0200] Get-Jobs ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm
D [10/Oct/2022:16:15:59 +0200] Get-Jobs client-error-not-found: The printer or class does not exist.
D [10/Oct/2022:16:15:59 +0200] [Client 52] Returning IPP client-error-not-found for Get-Jobs (ipp://localhost/printers/DCPL2500D_isaric_p6_2007frm) from localhost.
D [10/Oct/2022:16:15:59 +0200] [Client 52] Content-Length: 130
D [10/Oct/2022:16:15:59 +0200] [Client 52] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:15:59 +0200] [Client 52] con->http=0x564494a85450
D [10/Oct/2022:16:15:59 +0200] [Client 52] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=130, response=0x564494a88ea0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:15:59 +0200] [Client 52] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:15:59 +0200] [Client 52] bytes=0, http_state=0, data_remaining=130
D [10/Oct/2022:16:15:59 +0200] [Client 52] Flushing write buffer.
D [10/Oct/2022:16:15:59 +0200] [Client 52] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:15:59 +0200] [Client 52] Waiting for request.
D [10/Oct/2022:16:15:59 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 53] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:16:00 +0200] [Client 53] Closing connection.
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [10/Oct/2022:16:16:00 +0200] Expiring subscriptions...
D [10/Oct/2022:16:16:00 +0200] [Job 504] Unloading...
D [10/Oct/2022:16:16:00 +0200] [Client 54] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:16:00 +0200] [Client 54] Closing connection.
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 49] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:16:00 +0200] [Client 49] Closing connection.
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 55] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:16:00 +0200] [Client 55] Closing connection.
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 46] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:16:00 +0200] [Client 46] Closing connection.
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 52] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:16:00 +0200] [Client 52] Closing connection.
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 48] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=200, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] No authentication data provided.
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] 2.0 Get-Printer-Attributes 9
D [10/Oct/2022:16:16:00 +0200] Get-Printer-Attributes ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:16:00 +0200] [Client 48] Returning IPP successful-ok for Get-Printer-Attributes (ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:16:00 +0200] [Client 48] Content-Length: 1863
D [10/Oct/2022:16:16:00 +0200] [Client 48] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:16:00 +0200] [Client 48] con->http=0x564494a75550
D [10/Oct/2022:16:16:00 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1863, response=0x564494a55f10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:16:00 +0200] [Client 48] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:16:00 +0200] [Client 48] bytes=0, http_state=0, data_remaining=1863
D [10/Oct/2022:16:16:00 +0200] [Client 48] Flushing write buffer.
D [10/Oct/2022:16:16:00 +0200] [Client 48] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:16:00 +0200] [Client 48] Waiting for request.
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 48] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 48] Read: status=200, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 48] No authentication data provided.
D [10/Oct/2022:16:16:00 +0200] [Client 48] 2.0 Get-Job-Attributes 10
D [10/Oct/2022:16:16:00 +0200] Get-Job-Attributes ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:16:00 +0200] [Client 48] Returning IPP successful-ok for Get-Job-Attributes (ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:16:00 +0200] [Client 48] Content-Length: 303
D [10/Oct/2022:16:16:00 +0200] [Client 48] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:16:00 +0200] [Client 48] con->http=0x564494a75550
D [10/Oct/2022:16:16:00 +0200] [Client 48] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=303, response=0x564494a45bf0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:16:00 +0200] [Client 48] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:16:00 +0200] [Client 48] bytes=0, http_state=0, data_remaining=303
D [10/Oct/2022:16:16:00 +0200] [Client 48] Flushing write buffer.
D [10/Oct/2022:16:16:00 +0200] [Client 48] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:16:00 +0200] [Client 48] Waiting for request.
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 51] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=200, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] No authentication data provided.
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 51] 2.0 Get-Printer-Attributes 11
D [10/Oct/2022:16:16:00 +0200] Get-Printer-Attributes ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:16:00 +0200] [Client 51] Returning IPP successful-ok for Get-Printer-Attributes (ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:16:00 +0200] [Client 51] Content-Length: 1863
D [10/Oct/2022:16:16:00 +0200] [Client 51] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:16:00 +0200] [Client 51] con->http=0x564494a7fe20
D [10/Oct/2022:16:16:00 +0200] [Client 51] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1863, response=0x564494a55f10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:16:00 +0200] [Client 51] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:16:00 +0200] [Client 51] bytes=0, http_state=0, data_remaining=1863
D [10/Oct/2022:16:16:00 +0200] [Client 51] Flushing write buffer.
D [10/Oct/2022:16:16:00 +0200] [Client 51] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:16:00 +0200] [Client 51] Waiting for request.
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 51] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:16:00 +0200] [Client 51] Closing connection.
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 58] Server address is "192.168.1.93".
D [10/Oct/2022:16:16:00 +0200] [Client 58] Accepted from 192.168.1.65:34880 (IPv4)
D [10/Oct/2022:16:16:00 +0200] [Client 58] Waiting for request.
D [10/Oct/2022:16:16:00 +0200] [Client 58] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=200, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] No authentication data provided.
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] 2.0 Get-Job-Attributes 12
D [10/Oct/2022:16:16:00 +0200] Get-Job-Attributes ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:16:00 +0200] [Client 58] Returning IPP successful-ok for Get-Job-Attributes (ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:16:00 +0200] [Client 58] Content-Length: 303
D [10/Oct/2022:16:16:00 +0200] [Client 58] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:16:00 +0200] [Client 58] con->http=0x564494a691f0
D [10/Oct/2022:16:16:00 +0200] [Client 58] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=303, response=0x564494a31b30(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:16:00 +0200] [Client 58] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:16:00 +0200] [Client 58] bytes=0, http_state=0, data_remaining=303
D [10/Oct/2022:16:16:00 +0200] [Client 58] Flushing write buffer.
D [10/Oct/2022:16:16:00 +0200] [Client 58] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:16:00 +0200] [Client 58] Waiting for request.
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 58] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=200, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] No authentication data provided.
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] Read: status=100, state=6
D [10/Oct/2022:16:16:00 +0200] [Client 58] 2.0 Get-Printer-Attributes 13
D [10/Oct/2022:16:16:00 +0200] Get-Printer-Attributes ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:16:00 +0200] [Client 58] Returning IPP successful-ok for Get-Printer-Attributes (ipp://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:16:00 +0200] [Client 58] Content-Length: 1863
D [10/Oct/2022:16:16:00 +0200] [Client 58] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:16:00 +0200] [Client 58] con->http=0x564494a691f0
D [10/Oct/2022:16:16:00 +0200] [Client 58] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1863, response=0x564494a1cf50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:16:00 +0200] [Client 58] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:16:00 +0200] [Client 58] bytes=0, http_state=0, data_remaining=1863
D [10/Oct/2022:16:16:00 +0200] [Client 58] Flushing write buffer.
D [10/Oct/2022:16:16:00 +0200] [Client 58] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:16:00 +0200] [Client 58] Waiting for request.
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 58] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:16:00 +0200] [Client 58] Closing connection.
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:00 +0200] [Client 48] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:16:00 +0200] [Client 48] Closing connection.
D [10/Oct/2022:16:16:00 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [10/Oct/2022:16:16:01 +0200] Expiring subscriptions...
D [10/Oct/2022:16:16:15 +0200] [Client 56] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:16:15 +0200] [Client 56] Closing connection.
D [10/Oct/2022:16:16:15 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [10/Oct/2022:16:16:15 +0200] Expiring subscriptions...
I [10/Oct/2022:16:16:16 +0200] Expiring subscriptions...
D [10/Oct/2022:16:16:27 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:27 +0200] [Client 59] Server address is "192.168.1.93".
D [10/Oct/2022:16:16:27 +0200] [Client 59] Accepted from 192.168.1.65:51580 (IPv4)
D [10/Oct/2022:16:16:27 +0200] [Client 59] Waiting for request.
I [10/Oct/2022:16:16:27 +0200] Expiring subscriptions...
D [10/Oct/2022:16:16:27 +0200] [Client 59] Connection now encrypted.
D [10/Oct/2022:16:16:27 +0200] [Client 59] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:16:27 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:16:27 +0200] [Client 59] Read: status=200, state=6
D [10/Oct/2022:16:16:27 +0200] [Client 59] No authentication data provided.
D [10/Oct/2022:16:16:27 +0200] [Client 59] Read: status=100, state=6
D [10/Oct/2022:16:16:27 +0200] [Client 59] 2.0 Get-Printer-Attributes 1603
D [10/Oct/2022:16:16:27 +0200] Get-Printer-Attributes ipps://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:16:27 +0200] [Client 59] Returning IPP successful-ok for Get-Printer-Attributes (ipps://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:16:27 +0200] [Client 59] Content-Length: 155
D [10/Oct/2022:16:16:27 +0200] [Client 59] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:16:27 +0200] [Client 59] con->http=0x564494a75420
D [10/Oct/2022:16:16:27 +0200] [Client 59] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=155, response=0x564494a31b30(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:16:27 +0200] [Client 59] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:16:27 +0200] [Client 59] bytes=0, http_state=0, data_remaining=155
D [10/Oct/2022:16:16:27 +0200] [Client 59] Flushing write buffer.
D [10/Oct/2022:16:16:27 +0200] [Client 59] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:16:27 +0200] [Client 59] Waiting for request.
D [10/Oct/2022:16:16:27 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:16:27 +0200] [Client 59] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:16:27 +0200] [Client 59] Closing connection.
D [10/Oct/2022:16:16:27 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:27 +0200] [Client 59] Waiting for socket close.
D [10/Oct/2022:16:16:27 +0200] [Client 59] Closing on EOF.
D [10/Oct/2022:16:16:27 +0200] [Client 59] Closing connection.
D [10/Oct/2022:16:16:27 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:28 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:16:28 +0200] [Client 60] Server address is "192.168.1.93".
D [10/Oct/2022:16:16:28 +0200] [Client 60] Accepted from 192.168.1.65:51584 (IPv4)
D [10/Oct/2022:16:16:28 +0200] [Client 60] Waiting for request.
I [10/Oct/2022:16:16:28 +0200] Expiring subscriptions...
D [10/Oct/2022:16:16:28 +0200] [Client 60] Connection now encrypted.
D [10/Oct/2022:16:16:28 +0200] [Client 60] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:16:28 +0200] [Client 60] Closing connection.
D [10/Oct/2022:16:16:28 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:16:28 +0200] [Client 60] Waiting for socket close.
D [10/Oct/2022:16:16:28 +0200] [Client 60] Closing on EOF.
D [10/Oct/2022:16:16:28 +0200] [Client 60] Closing connection.
D [10/Oct/2022:16:16:28 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [10/Oct/2022:16:16:29 +0200] Saving job.cache...
I [10/Oct/2022:16:16:29 +0200] Saving subscriptions.conf...
D [10/Oct/2022:16:16:29 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [10/Oct/2022:16:16:29 +0200] Expiring subscriptions...
D [10/Oct/2022:16:17:45 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:17:45 +0200] [Client 61] Server address is "192.168.1.93".
D [10/Oct/2022:16:17:45 +0200] [Client 61] Accepted from 192.168.1.65:52652 (IPv4)
D [10/Oct/2022:16:17:45 +0200] [Client 61] Waiting for request.
I [10/Oct/2022:16:17:45 +0200] Expiring subscriptions...
D [10/Oct/2022:16:17:45 +0200] [Job 505] Unloading...
D [10/Oct/2022:16:17:45 +0200] cupsdAddCert: Adding certificate for PID 0
D [10/Oct/2022:16:17:45 +0200] Report: clients=6
D [10/Oct/2022:16:17:45 +0200] Report: jobs=460
D [10/Oct/2022:16:17:45 +0200] Report: jobs-active=0
D [10/Oct/2022:16:17:45 +0200] Report: printers=2
D [10/Oct/2022:16:17:45 +0200] Report: stringpool-string-count=3466
D [10/Oct/2022:16:17:45 +0200] Report: stringpool-alloc-bytes=12864
D [10/Oct/2022:16:17:45 +0200] Report: stringpool-total-bytes=71920
D [10/Oct/2022:16:17:45 +0200] [Client 61] Connection now encrypted.
D [10/Oct/2022:16:17:45 +0200] [Client 61] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:17:45 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:16:17:45 +0200] [Client 61] Read: status=200, state=6
D [10/Oct/2022:16:17:45 +0200] [Client 61] No authentication data provided.
D [10/Oct/2022:16:17:45 +0200] cupsdNetIFUpdate: Ignoring "lo".
D [10/Oct/2022:16:17:45 +0200] cupsdNetIFUpdate: Ignoring "eno1".
D [10/Oct/2022:16:17:45 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [10/Oct/2022:16:17:45 +0200] cupsdNetIFUpdate: "eno1" = 192.168.1.93:631
D [10/Oct/2022:16:17:45 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [10/Oct/2022:16:17:45 +0200] cupsdNetIFUpdate: "eno1" = [v1.fe80::16c9:44a7:b32f:3577+eno1]:631
D [10/Oct/2022:16:17:45 +0200] [Client 61] Read: status=100, state=6
D [10/Oct/2022:16:17:45 +0200] [Client 61] 2.0 Get-Printer-Attributes 31
D [10/Oct/2022:16:17:45 +0200] Get-Printer-Attributes ipps://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:17:45 +0200] [Client 61] Returning IPP successful-ok for Get-Printer-Attributes (ipps://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:17:45 +0200] [Client 61] Content-Length: 13692
D [10/Oct/2022:16:17:45 +0200] [Client 61] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:17:45 +0200] [Client 61] con->http=0x564494a75420
D [10/Oct/2022:16:17:45 +0200] [Client 61] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=13692, response=0x564494a1cf50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:17:45 +0200] [Client 61] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:17:45 +0200] [Client 61] bytes=0, http_state=0, data_remaining=13692
D [10/Oct/2022:16:17:45 +0200] [Client 61] Flushing write buffer.
D [10/Oct/2022:16:17:45 +0200] [Client 61] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:17:45 +0200] [Client 61] Waiting for request.
D [10/Oct/2022:16:17:45 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:16:17:45 +0200] [Client 61] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:17:45 +0200] [Client 61] Closing connection.
D [10/Oct/2022:16:17:45 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [10/Oct/2022:16:17:45 +0200] [Client 61] Waiting for socket close.
D [10/Oct/2022:16:17:45 +0200] [Client 61] Closing on EOF.
D [10/Oct/2022:16:17:45 +0200] [Client 61] Closing connection.
D [10/Oct/2022:16:17:45 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [10/Oct/2022:16:17:46 +0200] Expiring subscriptions...
D [10/Oct/2022:16:19:17 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:19:17 +0200] [Client 62] Server address is "192.168.1.93".
D [10/Oct/2022:16:19:17 +0200] [Client 62] Accepted from 192.168.1.65:54042 (IPv4)
D [10/Oct/2022:16:19:17 +0200] [Client 62] Waiting for request.
I [10/Oct/2022:16:19:17 +0200] Expiring subscriptions...
D [10/Oct/2022:16:19:17 +0200] Report: clients=6
D [10/Oct/2022:16:19:17 +0200] Report: jobs=460
D [10/Oct/2022:16:19:17 +0200] Report: jobs-active=0
D [10/Oct/2022:16:19:17 +0200] Report: printers=2
D [10/Oct/2022:16:19:17 +0200] Report: stringpool-string-count=3466
D [10/Oct/2022:16:19:17 +0200] Report: stringpool-alloc-bytes=12864
D [10/Oct/2022:16:19:17 +0200] Report: stringpool-total-bytes=71920
D [10/Oct/2022:16:19:17 +0200] [Client 62] Connection now encrypted.
D [10/Oct/2022:16:19:17 +0200] [Client 62] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:16:19:17 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:16:19:17 +0200] [Client 62] Read: status=200, state=6
D [10/Oct/2022:16:19:17 +0200] [Client 62] No authentication data provided.
D [10/Oct/2022:16:19:17 +0200] cupsdNetIFUpdate: Ignoring "lo".
D [10/Oct/2022:16:19:17 +0200] cupsdNetIFUpdate: Ignoring "eno1".
D [10/Oct/2022:16:19:17 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [10/Oct/2022:16:19:17 +0200] cupsdNetIFUpdate: "eno1" = 192.168.1.93:631
D [10/Oct/2022:16:19:17 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [10/Oct/2022:16:19:17 +0200] cupsdNetIFUpdate: "eno1" = [v1.fe80::16c9:44a7:b32f:3577+eno1]:631
D [10/Oct/2022:16:19:17 +0200] [Client 62] Read: status=100, state=6
D [10/Oct/2022:16:19:17 +0200] [Client 62] 2.0 Get-Printer-Attributes 53
D [10/Oct/2022:16:19:17 +0200] Get-Printer-Attributes ipps://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:16:19:17 +0200] [Client 62] Returning IPP successful-ok for Get-Printer-Attributes (ipps://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:16:19:17 +0200] [Client 62] Content-Length: 155
D [10/Oct/2022:16:19:17 +0200] [Client 62] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:19:17 +0200] [Client 62] con->http=0x564494a75420
D [10/Oct/2022:16:19:17 +0200] [Client 62] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=155, response=0x564494a45bf0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:19:17 +0200] [Client 62] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:19:17 +0200] [Client 62] bytes=0, http_state=0, data_remaining=155
D [10/Oct/2022:16:19:17 +0200] [Client 62] Flushing write buffer.
D [10/Oct/2022:16:19:17 +0200] [Client 62] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:19:17 +0200] [Client 62] Waiting for request.
D [10/Oct/2022:16:19:17 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:16:19:17 +0200] [Client 62] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:19:17 +0200] [Client 62] Closing connection.
D [10/Oct/2022:16:19:17 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [10/Oct/2022:16:19:17 +0200] [Client 62] Waiting for socket close.
D [10/Oct/2022:16:19:17 +0200] [Client 62] Closing on EOF.
D [10/Oct/2022:16:19:17 +0200] [Client 62] Closing connection.
D [10/Oct/2022:16:19:17 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [10/Oct/2022:16:19:18 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:19:18 +0200] [Client 63] Server address is "192.168.1.93".
D [10/Oct/2022:16:19:18 +0200] [Client 63] Accepted from 192.168.1.65:54052 (IPv4)
D [10/Oct/2022:16:19:18 +0200] [Client 63] Waiting for request.
I [10/Oct/2022:16:19:18 +0200] Expiring subscriptions...
D [10/Oct/2022:16:19:18 +0200] [Client 63] Connection now encrypted.
D [10/Oct/2022:16:19:18 +0200] [Client 63] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:19:18 +0200] [Client 63] Closing connection.
D [10/Oct/2022:16:19:18 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:16:19:18 +0200] [Client 63] Waiting for socket close.
D [10/Oct/2022:16:19:18 +0200] [Client 63] Closing on EOF.
D [10/Oct/2022:16:19:18 +0200] [Client 63] Closing connection.
D [10/Oct/2022:16:19:18 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [10/Oct/2022:16:19:19 +0200] Expiring subscriptions...
D [10/Oct/2022:16:20:08 +0200] [Client 27] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:20:08 +0200] [Client 27] Closing connection.
D [10/Oct/2022:16:20:08 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [10/Oct/2022:16:20:08 +0200] Expiring subscriptions...
I [10/Oct/2022:16:20:09 +0200] Expiring subscriptions...
I [10/Oct/2022:16:20:33 +0200] Expiring subscriptions...
D [10/Oct/2022:16:20:33 +0200] Closing client 1 after 900 seconds of inactivity.
D [10/Oct/2022:16:20:33 +0200] [Client 1] Closing connection.
D [10/Oct/2022:16:20:33 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [10/Oct/2022:16:20:33 +0200] Closing client 2 after 900 seconds of inactivity.
D [10/Oct/2022:16:20:33 +0200] [Client 2] Closing connection.
D [10/Oct/2022:16:20:33 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [10/Oct/2022:16:20:33 +0200] Report: clients=2
D [10/Oct/2022:16:20:33 +0200] Report: jobs=460
D [10/Oct/2022:16:20:33 +0200] Report: jobs-active=0
D [10/Oct/2022:16:20:33 +0200] Report: printers=2
D [10/Oct/2022:16:20:33 +0200] Report: stringpool-string-count=3466
D [10/Oct/2022:16:20:33 +0200] Report: stringpool-alloc-bytes=12864
D [10/Oct/2022:16:20:33 +0200] Report: stringpool-total-bytes=71920
D [10/Oct/2022:16:21:31 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:21:31 +0200] [Client 64] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:21:31 +0200] [Client 64] Accepted from localhost (Domain)
D [10/Oct/2022:16:21:31 +0200] [Client 64] Waiting for request.
I [10/Oct/2022:16:21:31 +0200] Expiring subscriptions...
D [10/Oct/2022:16:21:31 +0200] [Client 64] POST / HTTP/1.1
D [10/Oct/2022:16:21:31 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:16:21:31 +0200] [Client 64] Read: status=200, state=6
D [10/Oct/2022:16:21:31 +0200] [Client 64] No authentication data provided.
D [10/Oct/2022:16:21:31 +0200] [Client 64] 2.0 Renew-Subscription 70
D [10/Oct/2022:16:21:31 +0200] Renew-Subscription /
D [10/Oct/2022:16:21:31 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:21:31 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:21:31 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [10/Oct/2022:16:21:31 +0200] [Client 64] Returning IPP successful-ok for Renew-Subscription (/) from localhost.
D [10/Oct/2022:16:21:31 +0200] [Client 64] Content-Length: 106
D [10/Oct/2022:16:21:31 +0200] [Client 64] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:21:31 +0200] [Client 64] con->http=0x564494a57180
D [10/Oct/2022:16:21:31 +0200] [Client 64] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=106, response=0x564494a31b30(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:21:31 +0200] [Client 64] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:21:31 +0200] [Client 64] bytes=0, http_state=0, data_remaining=106
D [10/Oct/2022:16:21:31 +0200] [Client 64] Flushing write buffer.
D [10/Oct/2022:16:21:31 +0200] [Client 64] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:21:31 +0200] [Client 64] Waiting for request.
D [10/Oct/2022:16:21:31 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [10/Oct/2022:16:21:32 +0200] Expiring subscriptions...
D [10/Oct/2022:16:21:46 +0200] [Client 64] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:21:46 +0200] [Client 64] Closing connection.
D [10/Oct/2022:16:21:46 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [10/Oct/2022:16:21:46 +0200] Expiring subscriptions...
D [10/Oct/2022:16:21:46 +0200] Report: clients=2
D [10/Oct/2022:16:21:46 +0200] Report: jobs=460
D [10/Oct/2022:16:21:46 +0200] Report: jobs-active=0
D [10/Oct/2022:16:21:46 +0200] Report: printers=2
D [10/Oct/2022:16:21:46 +0200] Report: stringpool-string-count=3466
D [10/Oct/2022:16:21:46 +0200] Report: stringpool-alloc-bytes=12864
D [10/Oct/2022:16:21:46 +0200] Report: stringpool-total-bytes=71920
I [10/Oct/2022:16:21:47 +0200] Expiring subscriptions...
I [10/Oct/2022:16:22:03 +0200] Saving subscriptions.conf...
D [10/Oct/2022:16:22:03 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [10/Oct/2022:16:22:03 +0200] Expiring subscriptions...
D [10/Oct/2022:16:29:23 +0200] [Client 28] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:29:23 +0200] [Client 28] Closing connection.
D [10/Oct/2022:16:29:23 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [10/Oct/2022:16:29:23 +0200] Expiring subscriptions...
D [10/Oct/2022:16:29:23 +0200] cupsdAddCert: Adding certificate for PID 0
D [10/Oct/2022:16:29:23 +0200] Report: clients=1
D [10/Oct/2022:16:29:23 +0200] Report: jobs=460
D [10/Oct/2022:16:29:23 +0200] Report: jobs-active=0
D [10/Oct/2022:16:29:23 +0200] Report: printers=2
D [10/Oct/2022:16:29:23 +0200] Report: stringpool-string-count=3466
D [10/Oct/2022:16:29:23 +0200] Report: stringpool-alloc-bytes=12864
D [10/Oct/2022:16:29:23 +0200] Report: stringpool-total-bytes=71920
I [10/Oct/2022:16:29:24 +0200] Expiring subscriptions...
D [10/Oct/2022:16:29:27 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:16:29:27 +0200] [Client 65] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:29:27 +0200] [Client 65] Accepted from localhost (Domain)
D [10/Oct/2022:16:29:27 +0200] [Client 65] Waiting for request.
I [10/Oct/2022:16:29:27 +0200] Expiring subscriptions...
D [10/Oct/2022:16:29:27 +0200] [Client 65] POST / HTTP/1.1
D [10/Oct/2022:16:29:27 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:16:29:27 +0200] [Client 65] Read: status=200, state=6
D [10/Oct/2022:16:29:27 +0200] [Client 65] No authentication data provided.
D [10/Oct/2022:16:29:27 +0200] [Client 65] 2.0 Cancel-Subscription 71
D [10/Oct/2022:16:29:27 +0200] Cancel-Subscription /
D [10/Oct/2022:16:29:27 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:29:27 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:29:27 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [10/Oct/2022:16:29:27 +0200] [Client 65] Returning IPP successful-ok for Cancel-Subscription (/) from localhost.
D [10/Oct/2022:16:29:27 +0200] [Client 65] Content-Length: 75
D [10/Oct/2022:16:29:27 +0200] [Client 65] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:29:27 +0200] [Client 65] con->http=0x564494a57180
D [10/Oct/2022:16:29:27 +0200] [Client 65] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a45bf0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:29:27 +0200] [Client 65] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:29:27 +0200] [Client 65] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:29:27 +0200] [Client 65] Flushing write buffer.
D [10/Oct/2022:16:29:27 +0200] [Client 65] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:29:27 +0200] [Client 65] Waiting for request.
D [10/Oct/2022:16:29:27 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:27 +0200] [Notifier] state=-1
D [10/Oct/2022:16:29:27 +0200] [Notifier] ippReadFile() returned IPP_ERROR!
D [10/Oct/2022:16:29:27 +0200] PID 26216 (/usr/lib/cups/notifier/dbus) exited with no errors.
D [10/Oct/2022:16:29:27 +0200] [Client 65] POST / HTTP/1.1
D [10/Oct/2022:16:29:27 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:29:27 +0200] [Client 65] Read: status=200, state=6
D [10/Oct/2022:16:29:27 +0200] [Client 65] No authentication data provided.
D [10/Oct/2022:16:29:27 +0200] [Client 65] Read: status=100, state=6
D [10/Oct/2022:16:29:27 +0200] [Client 65] Read: status=100, state=6
D [10/Oct/2022:16:29:27 +0200] [Client 65] Read: status=100, state=6
D [10/Oct/2022:16:29:27 +0200] [Client 65] Read: status=100, state=6
D [10/Oct/2022:16:29:27 +0200] [Client 65] Read: status=100, state=6
D [10/Oct/2022:16:29:27 +0200] [Client 65] Read: status=100, state=6
D [10/Oct/2022:16:29:27 +0200] [Client 65] Read: status=100, state=6
D [10/Oct/2022:16:29:27 +0200] [Client 65] 2.0 Cancel-Subscription 72
D [10/Oct/2022:16:29:27 +0200] Cancel-Subscription /
D [10/Oct/2022:16:29:27 +0200] Cancel-Subscription client-error-not-found: Subscription #0 does not exist.
D [10/Oct/2022:16:29:27 +0200] [Client 65] Returning IPP client-error-not-found for Cancel-Subscription (/) from localhost.
D [10/Oct/2022:16:29:27 +0200] [Client 65] Content-Length: 125
D [10/Oct/2022:16:29:27 +0200] [Client 65] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:29:27 +0200] [Client 65] con->http=0x564494a57180
D [10/Oct/2022:16:29:27 +0200] [Client 65] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=125, response=0x564494a66bc0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:29:27 +0200] [Client 65] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:29:27 +0200] [Client 65] bytes=0, http_state=0, data_remaining=125
D [10/Oct/2022:16:29:27 +0200] [Client 65] Flushing write buffer.
D [10/Oct/2022:16:29:27 +0200] [Client 65] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:29:27 +0200] [Client 65] Waiting for request.
D [10/Oct/2022:16:29:27 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:27 +0200] [Client 65] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:29:27 +0200] [Client 65] Closing connection.
D [10/Oct/2022:16:29:27 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [10/Oct/2022:16:29:28 +0200] Expiring subscriptions...
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 66] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:29:32 +0200] [Client 66] Accepted from localhost (Domain)
D [10/Oct/2022:16:29:32 +0200] [Client 66] Waiting for request.
I [10/Oct/2022:16:29:32 +0200] Expiring subscriptions...
D [10/Oct/2022:16:29:32 +0200] [Client 66] POST / HTTP/1.1
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 66] Read: status=200, state=6
D [10/Oct/2022:16:29:32 +0200] [Client 66] No authentication data provided.
D [10/Oct/2022:16:29:32 +0200] [Client 66] 2.0 Cancel-Subscription 72
D [10/Oct/2022:16:29:32 +0200] Cancel-Subscription /
D [10/Oct/2022:16:29:32 +0200] cupsdIsAuthorized: requesting-user-name="isaric"
D [10/Oct/2022:16:29:32 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 66] Returning IPP successful-ok for Cancel-Subscription (/) from localhost.
D [10/Oct/2022:16:29:32 +0200] [Client 66] Content-Length: 75
D [10/Oct/2022:16:29:32 +0200] [Client 66] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:29:32 +0200] PID 25775 (/usr/lib/cups/notifier/dbus) exited with no errors.
D [10/Oct/2022:16:29:32 +0200] [Client 66] con->http=0x564494a57180
D [10/Oct/2022:16:29:32 +0200] [Client 66] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a1cf50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:29:32 +0200] [Client 66] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:29:32 +0200] [Client 66] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:29:32 +0200] [Client 66] Flushing write buffer.
D [10/Oct/2022:16:29:32 +0200] [Client 66] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:29:32 +0200] [Client 66] Waiting for request.
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:32 +0200] [Notifier] state=-1
D [10/Oct/2022:16:29:32 +0200] [Notifier] ippReadFile() returned IPP_ERROR!
D [10/Oct/2022:16:29:32 +0200] [Client 66] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:29:32 +0200] [Client 66] Closing connection.
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 67] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:29:32 +0200] [Client 67] Accepted from localhost (Domain)
D [10/Oct/2022:16:29:32 +0200] [Client 67] Waiting for request.
D [10/Oct/2022:16:29:32 +0200] [Client 67] POST / HTTP/1.1
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 67] Read: status=200, state=6
D [10/Oct/2022:16:29:32 +0200] [Client 67] No authentication data provided.
D [10/Oct/2022:16:29:32 +0200] [Client 67] 2.0 Cancel-Subscription 73
D [10/Oct/2022:16:29:32 +0200] Cancel-Subscription /
D [10/Oct/2022:16:29:32 +0200] Cancel-Subscription client-error-not-found: Subscription #5312 does not exist.
D [10/Oct/2022:16:29:32 +0200] [Client 67] Returning IPP client-error-not-found for Cancel-Subscription (/) from localhost.
D [10/Oct/2022:16:29:32 +0200] [Client 67] Content-Length: 128
D [10/Oct/2022:16:29:32 +0200] [Client 67] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:29:32 +0200] [Client 67] con->http=0x564494a39cf0
D [10/Oct/2022:16:29:32 +0200] [Client 67] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=128, response=0x564494a45bf0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:29:32 +0200] [Client 67] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:29:32 +0200] [Client 67] bytes=0, http_state=0, data_remaining=128
D [10/Oct/2022:16:29:32 +0200] [Client 67] Flushing write buffer.
D [10/Oct/2022:16:29:32 +0200] [Client 67] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:29:32 +0200] [Client 67] Waiting for request.
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 67] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:29:32 +0200] [Client 67] Closing connection.
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 5] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:29:32 +0200] [Client 5] Closing connection.
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 68] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:29:32 +0200] [Client 68] Accepted from localhost (Domain)
D [10/Oct/2022:16:29:32 +0200] [Client 68] Waiting for request.
D [10/Oct/2022:16:29:32 +0200] [Client 68] POST / HTTP/1.1
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 68] Read: status=200, state=6
D [10/Oct/2022:16:29:32 +0200] [Client 68] No authentication data provided.
D [10/Oct/2022:16:29:32 +0200] [Client 68] 2.0 Cancel-Subscription 20
D [10/Oct/2022:16:29:32 +0200] Cancel-Subscription /
D [10/Oct/2022:16:29:32 +0200] [Client 68] Returning HTTP Non autorisé for Cancel-Subscription (/) from localhost
D [10/Oct/2022:16:29:32 +0200] [Client 68] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [10/Oct/2022:16:29:32 +0200] [Client 68] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D [10/Oct/2022:16:29:32 +0200] [Client 68] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:29:32 +0200] [Client 68] Closing connection.
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 69] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:29:32 +0200] [Client 69] Accepted from localhost (Domain)
D [10/Oct/2022:16:29:32 +0200] [Client 69] Waiting for request.
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 70] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:29:32 +0200] [Client 70] Accepted from localhost (Domain)
D [10/Oct/2022:16:29:32 +0200] [Client 70] Waiting for request.
D [10/Oct/2022:16:29:32 +0200] [Client 69] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:29:32 +0200] [Client 69] Closing connection.
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 71] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:29:32 +0200] [Client 71] Accepted from localhost (Domain)
D [10/Oct/2022:16:29:32 +0200] [Client 71] Waiting for request.
D [10/Oct/2022:16:29:32 +0200] [Client 70] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:29:32 +0200] [Client 70] Closing connection.
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 71] POST / HTTP/1.1
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 71] Read: status=200, state=6
D [10/Oct/2022:16:29:32 +0200] [Client 71] Authorized as root using PeerCred.
D [10/Oct/2022:16:29:32 +0200] [Client 71] 2.0 Cancel-Subscription 20
D [10/Oct/2022:16:29:32 +0200] Cancel-Subscription /
D [10/Oct/2022:16:29:32 +0200] cupsdIsAuthorized: username="root"
D [10/Oct/2022:16:29:32 +0200] [Client 71] AppArmor profile is '/usr/sbin/cups-browsed'.
D [10/Oct/2022:16:29:32 +0200] [Client 71] Not a snap - allowed.
D [10/Oct/2022:16:29:32 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 71] Returning IPP successful-ok for Cancel-Subscription (/) from localhost.
D [10/Oct/2022:16:29:32 +0200] [Client 71] Content-Length: 75
D [10/Oct/2022:16:29:32 +0200] [Client 71] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:29:32 +0200] [Client 71] con->http=0x564494a39cf0
D [10/Oct/2022:16:29:32 +0200] [Client 71] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a1cf50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:29:32 +0200] [Client 71] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:29:32 +0200] [Client 71] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:29:32 +0200] [Client 71] Flushing write buffer.
D [10/Oct/2022:16:29:32 +0200] [Client 71] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:29:32 +0200] [Client 71] Waiting for request.
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:32 +0200] [Notifier] state=-1
D [10/Oct/2022:16:29:32 +0200] [Notifier] ippReadFile() returned IPP_ERROR!
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 72] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:16:29:32 +0200] [Client 72] Accepted from localhost (Domain)
D [10/Oct/2022:16:29:32 +0200] [Client 72] Waiting for request.
D [10/Oct/2022:16:29:32 +0200] PID 25776 (/usr/lib/cups/notifier/dbus) exited with no errors.
D [10/Oct/2022:16:29:32 +0200] [Client 72] POST / HTTP/1.1
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 72] Read: status=200, state=6
D [10/Oct/2022:16:29:32 +0200] [Client 72] No authentication data provided.
D [10/Oct/2022:16:29:32 +0200] [Client 72] 2.0 Cancel-Subscription 21
D [10/Oct/2022:16:29:32 +0200] Cancel-Subscription /
D [10/Oct/2022:16:29:32 +0200] cupsdIsAuthorized: requesting-user-name="root"
D [10/Oct/2022:16:29:32 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 72] Returning IPP successful-ok for Cancel-Subscription (/) from localhost.
D [10/Oct/2022:16:29:32 +0200] [Client 72] Content-Length: 75
D [10/Oct/2022:16:29:32 +0200] [Client 72] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:16:29:32 +0200] [Client 72] con->http=0x564494a75420
D [10/Oct/2022:16:29:32 +0200] [Client 72] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564494a31b30(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:16:29:32 +0200] [Client 72] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:16:29:32 +0200] [Client 72] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:16:29:32 +0200] [Client 72] Flushing write buffer.
D [10/Oct/2022:16:29:32 +0200] [Client 72] New state is HTTP_STATE_WAITING
D [10/Oct/2022:16:29:32 +0200] [Client 72] Waiting for request.
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 72] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:29:32 +0200] [Client 72] Closing connection.
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:29:32 +0200] [Client 71] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:16:29:32 +0200] [Client 71] Closing connection.
D [10/Oct/2022:16:29:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:16:29:32 +0200] Avahi server disappeared, unregistering printers for Bonjour broadcasting.
I [10/Oct/2022:16:29:32 +0200] Scheduler shutting down normally.
D [10/Oct/2022:16:29:32 +0200] Discarding unused server-stopped event...
I [10/Oct/2022:16:29:32 +0200] Saving subscriptions.conf...
D [10/Oct/2022:16:29:33 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [10/Oct/2022:16:29:33 +0200] Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
I [10/Oct/2022:16:29:33 +0200] Saving job.cache...
D [10/Oct/2022:16:29:34 +0200] cupsdStopSelect()
I [10/Oct/2022:17:20:00 +0200] Listening to 0.0.0.0:631 (IPv4)
I [10/Oct/2022:17:20:00 +0200] Listening to [v1.::]:631 (IPv6)
I [10/Oct/2022:17:20:00 +0200] Listening to /run/cups/cups.sock (Domain)
I [10/Oct/2022:17:20:00 +0200] Remote access is enabled.
D [10/Oct/2022:17:20:00 +0200] Added auto ServerAlias isaric-p6-2007frm
I [10/Oct/2022:17:20:00 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
D [10/Oct/2022:17:20:00 +0200] Using keychain "/etc/cups/ssl" for server name "isaric-p6-2007frm".
D [10/Oct/2022:17:20:00 +0200] Repairing ownership of "/run/cups"
D [10/Oct/2022:17:20:00 +0200] Creating missing directory "/run/cups/certs"
D [10/Oct/2022:17:20:00 +0200] Repairing ownership of "/run/cups/certs"
D [10/Oct/2022:17:20:00 +0200] Repairing access permissions of "/run/cups/certs"
I [10/Oct/2022:17:20:00 +0200] Using default TempDir of /var/spool/cups/tmp...
I [10/Oct/2022:17:20:00 +0200] Configured for up to 100 clients.
I [10/Oct/2022:17:20:00 +0200] Allowing up to 100 client connections per host.
I [10/Oct/2022:17:20:00 +0200] Using policy "default" as the default.
I [10/Oct/2022:17:20:00 +0200] Full reload is required.
I [10/Oct/2022:17:20:01 +0200] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 78 types, 118 filters...
D [10/Oct/2022:17:20:01 +0200] Loading printer Brother_MFC_J5730DW...
D [10/Oct/2022:17:20:01 +0200] load_ppd: Loading /var/cache/cups/Brother_MFC_J5730DW.data...
D [10/Oct/2022:17:20:02 +0200] Brother_MFC_J5730DW: pdl='application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf'
D [10/Oct/2022:17:20:02 +0200] cupsdRegisterPrinter(p=0x5574db09ea20(Brother_MFC_J5730DW))
D [10/Oct/2022:17:20:02 +0200] Loading printer DCPL2500D...
D [10/Oct/2022:17:20:02 +0200] load_ppd: Loading /var/cache/cups/DCPL2500D.data...
D [10/Oct/2022:17:20:03 +0200] DCPL2500D: pdl='application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf'
D [10/Oct/2022:17:20:03 +0200] cupsdRegisterPrinter(p=0x5574db0a8cf0(DCPL2500D))
D [10/Oct/2022:17:20:03 +0200] Queue DCPL2500D uses a printer driver, which is deprecated.
W [10/Oct/2022:17:20:03 +0200] Printer drivers are deprecated and will stop working in a future version of CUPS. See https://github.com/OpenPrinting/cups/issues/103
I [10/Oct/2022:17:20:03 +0200] Generating printcap /run/cups/printcap...
I [10/Oct/2022:17:20:03 +0200] Loading job cache file "/var/cache/cups/job.cache"...
D [10/Oct/2022:17:20:03 +0200] [Job 256] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 256] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 257] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 257] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 258] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 258] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 259] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 259] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 260] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 260] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 261] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 261] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 262] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 262] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 263] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 263] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 264] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 264] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 265] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 265] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 266] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 266] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 267] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 267] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 268] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 268] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 269] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 269] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 270] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 270] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 271] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 271] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 272] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 272] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 273] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 273] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 274] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 274] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 275] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 275] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 277] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 277] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 279] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 279] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 281] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 281] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 283] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 283] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 284] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 284] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 285] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 285] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 286] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 286] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 287] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 287] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 288] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 288] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 289] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 289] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 290] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 290] Loading from cache...
D [10/Oct/2022:17:20:03 +0200] [Job 291] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 291] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 292] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 292] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 293] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 293] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 294] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 294] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 296] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 296] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 297] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 297] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 299] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 299] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 300] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 300] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 301] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 301] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 302] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 302] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 303] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 303] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 304] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 304] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 305] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 305] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 306] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 306] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 307] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 307] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 308] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 308] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 309] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 309] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 310] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 310] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 311] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 311] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 312] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 312] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 313] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 313] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 315] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 315] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 317] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 317] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 319] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 319] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 321] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 321] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 322] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 322] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 323] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 323] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 324] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 324] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 325] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 325] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 326] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 326] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 327] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 327] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 328] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 328] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 329] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 329] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 330] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 330] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 331] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 331] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 332] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 332] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 333] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 333] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 334] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 334] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 335] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 335] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 336] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 336] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 337] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 337] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 338] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 338] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 339] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 339] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 340] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 340] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 341] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 341] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 342] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 342] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 343] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 343] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 344] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 344] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 345] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 345] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 346] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 346] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 347] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 347] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 348] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 348] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 349] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 349] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 350] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 350] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 351] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 351] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 352] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 352] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 353] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 353] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 354] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 354] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 355] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 355] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 356] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 356] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 357] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 357] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 358] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 358] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 359] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 359] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 360] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 360] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 361] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 361] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 362] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 362] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 363] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 363] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 364] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 364] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 365] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 365] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 366] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 366] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 367] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 367] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 368] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 368] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 369] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 369] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 370] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 370] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 371] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 371] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 372] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 372] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 373] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 373] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 374] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 374] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 375] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 375] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 376] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 376] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 377] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 377] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 378] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 378] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 379] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 379] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 380] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 380] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 381] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 381] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 382] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 382] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 383] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 383] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 384] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 384] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 385] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 385] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 386] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 386] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 387] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 387] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 388] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 388] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 389] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 389] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 390] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 390] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 391] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 391] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 392] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 392] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 393] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 393] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 394] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 394] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 395] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 395] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 396] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 396] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 397] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 397] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 398] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 398] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 399] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 399] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 400] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 400] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 401] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 401] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 402] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 402] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 403] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 403] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 404] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 404] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 405] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 405] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 406] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 406] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 407] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 407] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 408] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 408] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 409] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 409] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 410] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 410] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 411] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 411] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 412] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 412] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 413] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 413] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 414] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 414] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 415] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 415] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 416] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 416] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 417] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 417] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 418] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 418] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 419] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 419] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 420] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 420] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 421] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 421] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 422] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 422] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 423] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 423] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 424] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 424] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 425] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 425] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 426] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 426] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 427] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 427] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 428] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 428] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 429] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 429] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 430] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 430] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 431] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 431] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 432] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 432] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 433] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 433] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 434] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 434] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 435] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 435] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 436] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 436] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 437] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 437] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 438] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 438] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 439] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 439] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 440] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 440] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 441] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 441] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 443] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 443] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 446] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 446] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 447] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 447] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 448] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 448] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 449] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 449] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 450] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 450] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 451] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 451] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 452] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 452] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 453] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 453] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 454] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 454] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 455] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 455] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 456] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 456] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 457] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 457] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 458] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 458] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 459] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 459] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 460] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 460] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 461] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 461] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 462] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 462] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 463] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 463] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 464] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 464] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 465] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 465] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 466] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 466] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 467] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 467] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 468] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 468] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 469] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 469] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 470] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 470] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 471] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 471] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 472] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 472] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 473] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 473] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 474] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 474] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 475] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 475] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 476] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 476] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 477] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 477] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 478] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 478] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 479] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 479] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 480] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 480] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 481] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 481] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 482] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 482] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 483] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 483] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 484] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 484] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 485] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 485] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 486] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 486] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 487] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 487] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 488] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 488] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 489] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 489] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 491] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 491] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 492] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 492] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 493] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 493] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 494] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 494] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 496] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 497] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 498] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 499] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 500] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 501] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 502] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 502] Loading attributes...
D [10/Oct/2022:17:20:04 +0200] [Job 502] Unloading...
D [10/Oct/2022:17:20:04 +0200] [Job 503] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 503] Loading attributes...
D [10/Oct/2022:17:20:04 +0200] [Job 503] Unloading...
D [10/Oct/2022:17:20:04 +0200] [Job 504] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 504] Loading attributes...
D [10/Oct/2022:17:20:04 +0200] [Job 504] Unloading...
D [10/Oct/2022:17:20:04 +0200] [Job 505] Loading from cache...
D [10/Oct/2022:17:20:04 +0200] [Job 505] Loading attributes...
D [10/Oct/2022:17:20:04 +0200] [Job 505] Unloading...
I [10/Oct/2022:17:20:04 +0200] Full reload complete.
D [10/Oct/2022:17:20:04 +0200] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [10/Oct/2022:17:20:04 +0200] Cleaning out old files in "/var/spool/cups/tmp".
D [10/Oct/2022:17:20:04 +0200] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [10/Oct/2022:17:20:04 +0200] Cleaning out old files in "/var/cache/cups".
D [10/Oct/2022:17:20:04 +0200] service_checkin: pid=973
D [10/Oct/2022:17:20:04 +0200] service_checkin: 1 listeners.
D [10/Oct/2022:17:20:04 +0200] service_add_listener: Listener #1 at fd 3, "/run/cups/cups.sock".
D [10/Oct/2022:17:20:04 +0200] service_add_listener: Matched existing listener #1 to /run/cups/cups.sock.
D [10/Oct/2022:17:20:04 +0200] Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
D [10/Oct/2022:17:20:04 +0200] Calling FindDeviceById(cups-Brother_MFC_J5730DW)
D [10/Oct/2022:17:20:05 +0200] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-Brother_MFC_J5730DW\' does not exist
D [10/Oct/2022:17:20:06 +0200] Using profile ID "Brother_MFC_J5730DW-Gray..".
D [10/Oct/2022:17:20:06 +0200] Calling CreateProfile(Brother_MFC_J5730DW-Gray..,temp)
D [10/Oct/2022:17:20:06 +0200] Created profile "/org/freedesktop/ColorManager/profiles/Brother_MFC_J5730DW_Gray__".
D [10/Oct/2022:17:20:06 +0200] Using profile ID "Brother_MFC_J5730DW-DeviceN..".
D [10/Oct/2022:17:20:06 +0200] Calling CreateProfile(Brother_MFC_J5730DW-DeviceN..,temp)
D [10/Oct/2022:17:20:06 +0200] Created profile "/org/freedesktop/ColorManager/profiles/Brother_MFC_J5730DW_DeviceN__".
I [10/Oct/2022:17:20:06 +0200] Registering ICC color profiles for "Brother_MFC_J5730DW".
D [10/Oct/2022:17:20:06 +0200] Calling CreateDevice(cups-Brother_MFC_J5730DW,temp)
D [10/Oct/2022:17:20:06 +0200] Created device "/org/freedesktop/ColorManager/devices/cups_Brother_MFC_J5730DW".
D [10/Oct/2022:17:20:06 +0200] Calling /org/freedesktop/ColorManager/devices/cups_Brother_MFC_J5730DW:AddProfile(/org/freedesktop/ColorManager/profiles/Brother_MFC_J5730DW_Gray__) [soft]
D [10/Oct/2022:17:20:06 +0200] Calling /org/freedesktop/ColorManager/devices/cups_Brother_MFC_J5730DW:AddProfile(/org/freedesktop/ColorManager/profiles/Brother_MFC_J5730DW_DeviceN__) [soft]
D [10/Oct/2022:17:20:06 +0200] Calling FindDeviceById(cups-DCPL2500D)
D [10/Oct/2022:17:20:06 +0200] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-DCPL2500D\' does not exist
D [10/Oct/2022:17:20:06 +0200] Using profile ID "DCPL2500D-Gray..".
D [10/Oct/2022:17:20:06 +0200] Calling CreateProfile(DCPL2500D-Gray..,temp)
D [10/Oct/2022:17:20:06 +0200] Created profile "/org/freedesktop/ColorManager/profiles/DCPL2500D_Gray__".
I [10/Oct/2022:17:20:06 +0200] Registering ICC color profiles for "DCPL2500D".
D [10/Oct/2022:17:20:06 +0200] Calling CreateDevice(cups-DCPL2500D,temp)
D [10/Oct/2022:17:20:06 +0200] Created device "/org/freedesktop/ColorManager/devices/cups_DCPL2500D".
D [10/Oct/2022:17:20:06 +0200] Calling /org/freedesktop/ColorManager/devices/cups_DCPL2500D:AddProfile(/org/freedesktop/ColorManager/profiles/DCPL2500D_Gray__) [soft]
I [10/Oct/2022:17:20:06 +0200] Listening to 0.0.0.0:631 on fd 7...
I [10/Oct/2022:17:20:06 +0200] Listening to [v1.::]:631 on fd 8...
I [10/Oct/2022:17:20:06 +0200] Listening to /run/cups/cups.sock on fd 3...
I [10/Oct/2022:17:20:06 +0200] Resuming new connection processing...
D [10/Oct/2022:17:20:06 +0200] Avahi server connection now available, registering printers for Bonjour broadcasting.
I [10/Oct/2022:17:20:06 +0200] Defaulting to "DNSSDHostName isaric-p6-2007frm.local".
D [10/Oct/2022:17:20:06 +0200] Registering "DCPL2500D @ isaric-p6-2007frm" with DNS-SD type "_printer._tcp".
D [10/Oct/2022:17:20:06 +0200] Registering "DCPL2500D @ isaric-p6-2007frm" with DNS-SD type "_ipps._tcp".
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" printer-type=0x809016
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" Duplex=T
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" mopria-certified=1.3
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" TLS=1.2
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" UUID=e136b5fc-7b6d-3f55-6938-1001bdcf0e0e
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" pdl=application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" product=(Brother DCP-L2500D series)
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" priority=0
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" adminurl=https://isaric-p6-2007frm.local.:631/printers/DCPL2500D
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" ty=Brother DCP-L2500D for CUPS
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" rp=printers/DCPL2500D
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" qtotal=1
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" txtvers=1
D [10/Oct/2022:17:20:06 +0200] Registering "DCPL2500D @ isaric-p6-2007frm" with DNS-SD type "_ipp._tcp".
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" printer-type=0x809016
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" Duplex=T
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" mopria-certified=1.3
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" TLS=1.2
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" UUID=e136b5fc-7b6d-3f55-6938-1001bdcf0e0e
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" pdl=application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" product=(Brother DCP-L2500D series)
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" priority=0
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" adminurl=https://isaric-p6-2007frm.local.:631/printers/DCPL2500D
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" ty=Brother DCP-L2500D for CUPS
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" rp=printers/DCPL2500D
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" qtotal=1
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" txtvers=1
D [10/Oct/2022:17:20:06 +0200] Registering "DCPL2500D @ isaric-p6-2007frm" with DNS-SD type "_printer._tcp".
D [10/Oct/2022:17:20:06 +0200] Registering "DCPL2500D @ isaric-p6-2007frm" with DNS-SD type "_ipps._tcp".
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" printer-type=0x809016
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" Duplex=T
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" mopria-certified=1.3
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" TLS=1.2
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" UUID=e136b5fc-7b6d-3f55-6938-1001bdcf0e0e
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" pdl=application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" product=(Brother DCP-L2500D series)
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" priority=0
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" adminurl=https://isaric-p6-2007frm.local.:631/printers/DCPL2500D
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" ty=Brother DCP-L2500D for CUPS
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" rp=printers/DCPL2500D
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" qtotal=1
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" txtvers=1
D [10/Oct/2022:17:20:06 +0200] Registering "DCPL2500D @ isaric-p6-2007frm" with DNS-SD type "_ipp._tcp".
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" printer-type=0x809016
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" Duplex=T
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" mopria-certified=1.3
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" TLS=1.2
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" UUID=e136b5fc-7b6d-3f55-6938-1001bdcf0e0e
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" pdl=application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" product=(Brother DCP-L2500D series)
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" priority=0
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" adminurl=https://isaric-p6-2007frm.local.:631/printers/DCPL2500D
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" ty=Brother DCP-L2500D for CUPS
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" rp=printers/DCPL2500D
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" qtotal=1
D [10/Oct/2022:17:20:06 +0200] DNS_SD "DCPL2500D @ isaric-p6-2007frm" txtvers=1
D [10/Oct/2022:17:20:06 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:20:06 +0200] cupsdAddCert: Adding certificate for PID 0
D [10/Oct/2022:17:20:06 +0200] Discarding unused server-started event...
D [10/Oct/2022:17:20:06 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [10/Oct/2022:17:20:06 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:20:06 +0200] [Client 1] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:20:06 +0200] [Client 1] Accepted from localhost (Domain)
D [10/Oct/2022:17:20:06 +0200] [Client 1] Waiting for request.
D [10/Oct/2022:17:20:06 +0200] Report: clients=1
D [10/Oct/2022:17:20:06 +0200] Report: jobs=460
D [10/Oct/2022:17:20:06 +0200] Report: jobs-active=0
D [10/Oct/2022:17:20:06 +0200] Report: printers=2
D [10/Oct/2022:17:20:06 +0200] Report: stringpool-string-count=1379
D [10/Oct/2022:17:20:06 +0200] Report: stringpool-alloc-bytes=11536
D [10/Oct/2022:17:20:06 +0200] Report: stringpool-total-bytes=26952
D [10/Oct/2022:17:20:06 +0200] [Client 1] POST / HTTP/1.1
D [10/Oct/2022:17:20:06 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:17:20:06 +0200] [Client 1] Read: status=200, state=6
D [10/Oct/2022:17:20:06 +0200] [Client 1] No authentication data provided.
D [10/Oct/2022:17:20:06 +0200] [Client 1] 2.0 CUPS-Get-Devices 1
D [10/Oct/2022:17:20:06 +0200] CUPS-Get-Devices
D [10/Oct/2022:17:20:06 +0200] cupsdIsAuthorized: username=""
D [10/Oct/2022:17:20:06 +0200] [Client 1] Returning HTTP Non autorisé for CUPS-Get-Devices (no URI) from localhost
D [10/Oct/2022:17:20:06 +0200] [Client 1] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [10/Oct/2022:17:20:06 +0200] [Client 1] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D [10/Oct/2022:17:20:06 +0200] [Client 1] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:20:06 +0200] [Client 1] Closing connection.
D [10/Oct/2022:17:20:06 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:20:06 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:20:06 +0200] [Client 2] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:20:06 +0200] [Client 2] Accepted from localhost (Domain)
D [10/Oct/2022:17:20:06 +0200] [Client 2] Waiting for request.
D [10/Oct/2022:17:20:06 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:17:20:06 +0200] [Client 3] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:20:06 +0200] [Client 3] Accepted from localhost (Domain)
D [10/Oct/2022:17:20:06 +0200] [Client 3] Waiting for request.
D [10/Oct/2022:17:20:06 +0200] [Client 2] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:20:06 +0200] [Client 2] Closing connection.
D [10/Oct/2022:17:20:06 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:20:06 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:20:06 +0200] [Client 4] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:20:06 +0200] [Client 4] Accepted from localhost (Domain)
D [10/Oct/2022:17:20:06 +0200] [Client 4] Waiting for request.
D [10/Oct/2022:17:20:06 +0200] [Client 3] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:20:06 +0200] [Client 3] Closing connection.
D [10/Oct/2022:17:20:06 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:20:06 +0200] [Client 4] POST / HTTP/1.1
D [10/Oct/2022:17:20:06 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:20:06 +0200] [Client 4] Read: status=200, state=6
D [10/Oct/2022:17:20:06 +0200] [Client 4] Authorized as root using PeerCred.
D [10/Oct/2022:17:20:06 +0200] [Client 4] 2.0 CUPS-Get-Devices 1
D [10/Oct/2022:17:20:06 +0200] CUPS-Get-Devices
D [10/Oct/2022:17:20:06 +0200] cupsdIsAuthorized: username="root"
D [10/Oct/2022:17:20:06 +0200] [Client 4] AppArmor profile is 'unconfined'.
D [10/Oct/2022:17:20:06 +0200] [Client 4] Not a snap - allowed.
D [10/Oct/2022:17:20:06 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [10/Oct/2022:17:20:06 +0200] [CGI] argv[1] = "1"
D [10/Oct/2022:17:20:06 +0200] [CGI] argv[2] = "0"
D [10/Oct/2022:17:20:06 +0200] [CGI] argv[3] = "2"
D [10/Oct/2022:17:20:06 +0200] [CGI] argv[4] = "7"
D [10/Oct/2022:17:20:06 +0200] [CGI] argv[5] = "requested-attributes=all exclude-schemes=\'beh\',\'cups-pdf\',\'bluetooth\',\'dnssd\',\'http\',\'https\',\'ipp\',\'lpd\',\'ncp\',\'parallel\',\'scsi\',\'smb\',\'snmp\',\'socket\'"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[3] = "CUPS_REQUESTROOT=/var/spool/cups"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[4] = "CUPS_SERVERBIN=/usr/lib/cups"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[5] = "CUPS_SERVERROOT=/etc/cups"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[6] = "CUPS_STATEDIR=/run/cups"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[7] = "HOME=/var/spool/cups/tmp"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[8] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[9] = "SERVER_ADMIN=root@isaric-p6-2007frm"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[10] = "SOFTWARE=CUPS/2.4.1"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[11] = "TMPDIR=/var/spool/cups/tmp"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[12] = "USER=root"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[13] = "CUPS_MAX_MESSAGE=2047"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[14] = "CUPS_SERVER=/run/cups/cups.sock"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[16] = "IPP_PORT=631"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[18] = "LANG=fr_FR.UTF8"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[22] = "SERVER_PORT=631"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[23] = "REMOTE_ADDR=localhost"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[25] = "SCRIPT_NAME=/"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[27] = "REMOTE_USER=root"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/2.4.1 (Linux 5.15.0-50-generic; x86_64) IPP/2.0"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[30] = "REQUEST_METHOD=POST"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[31] = "CONTENT_LENGTH=244"
D [10/Oct/2022:17:20:06 +0200] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D [10/Oct/2022:17:20:06 +0200] cupsdAddCert: Adding certificate for PID 1099
D [10/Oct/2022:17:20:06 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 1099)
I [10/Oct/2022:17:20:06 +0200] [Client 4] Started "/usr/lib/cups/daemon/cups-deviced" (pid=1099, file=16)
D [10/Oct/2022:17:20:06 +0200] [Client 4] Waiting for CGI data.
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/hpfax (PID 1100)
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/cups-brf (PID 1101)
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/driverless-fax (PID 1102)
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/driverless (PID 1103)
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 1104)
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/hp (PID 1105)
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/implicitclass (PID 1106)
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 1107)
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 1108)
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 1109)
D [10/Oct/2022:17:20:06 +0200] [CGI] Loading USB quirks from \"/usr/share/cups/usb\".
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] PID 1108 (serial) exited with no errors.
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] PID 1109 (mdns) exited with no errors.
D [10/Oct/2022:17:20:06 +0200] [Client 4] CGI data ready to be sent.
D [10/Oct/2022:17:20:06 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] Found device \"ipps\"...
D [10/Oct/2022:17:20:06 +0200] [Client 4] con->http=0x5574db154910
D [10/Oct/2022:17:20:06 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=1099, file=16
D [10/Oct/2022:17:20:06 +0200] [Client 4] Waiting for CGI data.
D [10/Oct/2022:17:20:06 +0200] [Client 4] Script header: Content-Type: application/ipp
D [10/Oct/2022:17:20:06 +0200] [Client 4] Script header: 
D [10/Oct/2022:17:20:06 +0200] [Client 4] Sending status 200 for CGI.
D [10/Oct/2022:17:20:06 +0200] [Client 4] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [10/Oct/2022:17:20:06 +0200] [Client 4] con->http=0x5574db154910
D [10/Oct/2022:17:20:06 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=1099, file=16
D [10/Oct/2022:17:20:06 +0200] [Client 4] Waiting for CGI data.
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] PID 1104 (ipps) exited with no errors.
D [10/Oct/2022:17:20:06 +0200] [Client 4] CGI data ready to be sent.
D [10/Oct/2022:17:20:06 +0200] [Client 4] con->http=0x5574db154910
D [10/Oct/2022:17:20:06 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=1099, file=16
D [10/Oct/2022:17:20:06 +0200] [Client 4] Waiting for CGI data.
D [10/Oct/2022:17:20:06 +0200] [Client 4] con->http=0x5574db154910
D [10/Oct/2022:17:20:06 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=1099, file=16
D [10/Oct/2022:17:20:06 +0200] [Client 4] Waiting for CGI data.
D [10/Oct/2022:17:20:06 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] Found device \"cups-brf:/\"...
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] PID 1101 (cups-brf) exited with no errors.
D [10/Oct/2022:17:20:06 +0200] [CGI] Loaded 118 quirks.
D [10/Oct/2022:17:20:06 +0200] [CGI] list_devices
D [10/Oct/2022:17:20:06 +0200] [CGI] libusb_get_device_list=9
D [10/Oct/2022:17:20:06 +0200] [Client 4] CGI data ready to be sent.
D [10/Oct/2022:17:20:06 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] Found device \"usb://Brother/DCP-L2500D%20series?serial=E73908D7N915582\"...
D [10/Oct/2022:17:20:06 +0200] [Client 4] con->http=0x5574db154910
D [10/Oct/2022:17:20:06 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=1099, file=16
D [10/Oct/2022:17:20:06 +0200] [Client 4] Waiting for CGI data.
D [10/Oct/2022:17:20:06 +0200] [Client 4] con->http=0x5574db154910
D [10/Oct/2022:17:20:06 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=1099, file=16
D [10/Oct/2022:17:20:06 +0200] [Client 4] Waiting for CGI data.
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] PID 1107 (usb) exited with no errors.
D [10/Oct/2022:17:20:06 +0200] [CGI] Started ippfind (PID 1113)
D [10/Oct/2022:17:20:06 +0200] [Client 4] CGI data ready to be sent.
D [10/Oct/2022:17:20:06 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] Found device \"hp\"...
D [10/Oct/2022:17:20:06 +0200] [Client 4] con->http=0x5574db154910
D [10/Oct/2022:17:20:06 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=1099, file=16
D [10/Oct/2022:17:20:06 +0200] [Client 4] Waiting for CGI data.
D [10/Oct/2022:17:20:06 +0200] [Client 4] con->http=0x5574db154910
D [10/Oct/2022:17:20:06 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=1099, file=16
D [10/Oct/2022:17:20:06 +0200] [Client 4] Waiting for CGI data.
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] PID 1105 (hp) exited with no errors.
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] PID 1106 (implicitclass) exited with no errors.
D [10/Oct/2022:17:20:06 +0200] [cups-deviced] PID 1102 (driverless-fax) exited with no errors.
D [10/Oct/2022:17:20:07 +0200] [CGI] \033[31;01merror: Failed to create /var/spool/cups/tmp/.hplip\033[0m
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:20:07 +0200] [Client 5] Accepted from localhost (Domain)
D [10/Oct/2022:17:20:07 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:17:20:07 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:17:20:07 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:17:20:07 +0200] [Client 5] 2.0 Create-Printer-Subscriptions 1
D [10/Oct/2022:17:20:07 +0200] Create-Printer-Subscriptions /
D [10/Oct/2022:17:20:07 +0200] create_subscriptions(con=0x5574db15b160(5), uri="/")
D [10/Oct/2022:17:20:07 +0200] pullmethod="ippget"
D [10/Oct/2022:17:20:07 +0200] notify-lease-duration=86400
D [10/Oct/2022:17:20:07 +0200] notify-time-interval=60
D [10/Oct/2022:17:20:07 +0200] cupsdAddSubscription(mask=7ff, dest=(nil)(), job=(nil)(0), uri="(null)")
D [10/Oct/2022:17:20:07 +0200] Added subscription #5316 for server.
D [10/Oct/2022:17:20:07 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [10/Oct/2022:17:20:07 +0200] [Client 5] Content-Length: 107
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] con->http=0x5574db15c320
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x5574db135560(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:07 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] bytes=0, http_state=0, data_remaining=107
D [10/Oct/2022:17:20:07 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:17:20:07 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:07 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 6] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:20:07 +0200] [Client 6] Accepted from localhost (Domain)
D [10/Oct/2022:17:20:07 +0200] [Client 6] Waiting for request.
D [10/Oct/2022:17:20:07 +0200] [Client 6] POST / HTTP/1.1
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 6] Read: status=200, state=6
D [10/Oct/2022:17:20:07 +0200] [Client 6] No authentication data provided.
D [10/Oct/2022:17:20:07 +0200] [Client 6] 2.0 CUPS-Get-Default 2
D [10/Oct/2022:17:20:07 +0200] CUPS-Get-Default
D [10/Oct/2022:17:20:07 +0200] [Client 6] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:17:20:07 +0200] [Client 6] Content-Length: 10329
D [10/Oct/2022:17:20:07 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:07 +0200] [Client 6] con->http=0x5574db160c40
D [10/Oct/2022:17:20:07 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10329, response=0x5574db1392c0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:07 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:07 +0200] [Client 6] bytes=0, http_state=0, data_remaining=10329
D [10/Oct/2022:17:20:07 +0200] [Client 6] Flushing write buffer.
D [10/Oct/2022:17:20:07 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:07 +0200] [Client 6] Waiting for request.
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 6] POST / HTTP/1.1
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 6] Read: status=200, state=6
D [10/Oct/2022:17:20:07 +0200] [Client 6] No authentication data provided.
D [10/Oct/2022:17:20:07 +0200] [Client 6] 2.0 CUPS-Get-Printers 3
D [10/Oct/2022:17:20:07 +0200] CUPS-Get-Printers
D [10/Oct/2022:17:20:07 +0200] [Client 6] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:17:20:07 +0200] [Client 6] Content-Length: 3004
D [10/Oct/2022:17:20:07 +0200] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:07 +0200] [Client 6] con->http=0x5574db160c40
D [10/Oct/2022:17:20:07 +0200] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x5574db14be70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:07 +0200] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:07 +0200] [Client 6] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:17:20:07 +0200] [Client 6] Flushing write buffer.
D [10/Oct/2022:17:20:07 +0200] [Client 6] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:07 +0200] [Client 6] Waiting for request.
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] POST /printers/Brother_MFC_J5730DW HTTP/1.1
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:17:20:07 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:17:20:07 +0200] [Client 5] 2.0 Get-Printer-Attributes 4
D [10/Oct/2022:17:20:07 +0200] Get-Printer-Attributes ipp://localhost/printers/Brother_MFC_J5730DW
D [10/Oct/2022:17:20:07 +0200] [Client 5] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Brother_MFC_J5730DW) from localhost.
D [10/Oct/2022:17:20:07 +0200] [Client 5] Content-Length: 138
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] con->http=0x5574db15c320
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=138, response=0x5574db1392c0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:07 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] bytes=0, http_state=0, data_remaining=138
D [10/Oct/2022:17:20:07 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:17:20:07 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:07 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:17:20:07 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:17:20:07 +0200] [Client 5] 2.0 Get-Printer-Attributes 5
D [10/Oct/2022:17:20:07 +0200] Get-Printer-Attributes ipp://localhost/printers/DCPL2500D
D [10/Oct/2022:17:20:07 +0200] [Client 5] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/DCPL2500D) from localhost.
D [10/Oct/2022:17:20:07 +0200] [Client 5] Content-Length: 138
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] con->http=0x5574db15c320
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=138, response=0x5574db14be70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:07 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] bytes=0, http_state=0, data_remaining=138
D [10/Oct/2022:17:20:07 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:17:20:07 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:07 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:17:20:07 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:17:20:07 +0200] [Client 5] 2.0 CUPS-Get-Default 6
D [10/Oct/2022:17:20:07 +0200] CUPS-Get-Default
D [10/Oct/2022:17:20:07 +0200] [Client 5] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:17:20:07 +0200] [Client 5] Content-Length: 10329
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] con->http=0x5574db15c320
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10329, response=0x5574db1392c0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:07 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] bytes=0, http_state=0, data_remaining=10329
D [10/Oct/2022:17:20:07 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:17:20:07 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:07 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:17:20:07 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:17:20:07 +0200] [Client 5] 2.0 Create-Printer-Subscriptions 7
D [10/Oct/2022:17:20:07 +0200] Create-Printer-Subscriptions /
D [10/Oct/2022:17:20:07 +0200] create_subscriptions(con=0x5574db15b160(5), uri="/")
D [10/Oct/2022:17:20:07 +0200] recipient="dbus://"
D [10/Oct/2022:17:20:07 +0200] notify-lease-duration=86400
D [10/Oct/2022:17:20:07 +0200] notify-time-interval=0
D [10/Oct/2022:17:20:07 +0200] cupsdAddSubscription(mask=1fffff, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [10/Oct/2022:17:20:07 +0200] Added subscription #5317 for server.
D [10/Oct/2022:17:20:07 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [10/Oct/2022:17:20:07 +0200] [Client 5] Content-Length: 107
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] con->http=0x5574db15c320
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x5574db14d920(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:07 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] bytes=0, http_state=0, data_remaining=107
D [10/Oct/2022:17:20:07 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:17:20:07 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:07 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:17:20:07 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:17:20:07 +0200] [Client 5] 2.0 Get-Notifications 8
D [10/Oct/2022:17:20:07 +0200] Get-Notifications /
D [10/Oct/2022:17:20:07 +0200] cupsdIsAuthorized: requesting-user-name="root"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [10/Oct/2022:17:20:07 +0200] [Client 5] Content-Length: 127
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] con->http=0x5574db15c320
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x5574db1392c0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:07 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] bytes=0, http_state=0, data_remaining=127
D [10/Oct/2022:17:20:07 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:17:20:07 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:07 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:17:20:07 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:17:20:07 +0200] [Client 5] 2.0 Get-Notifications 9
D [10/Oct/2022:17:20:07 +0200] Get-Notifications /
D [10/Oct/2022:17:20:07 +0200] cupsdIsAuthorized: requesting-user-name="root"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [10/Oct/2022:17:20:07 +0200] [Client 5] Content-Length: 127
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] con->http=0x5574db15c320
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x5574db0ee380(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:07 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] bytes=0, http_state=0, data_remaining=127
D [10/Oct/2022:17:20:07 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:17:20:07 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:07 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:17:20:07 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:17:20:07 +0200] [Client 5] 2.0 Get-Notifications 10
D [10/Oct/2022:17:20:07 +0200] Get-Notifications /
D [10/Oct/2022:17:20:07 +0200] cupsdIsAuthorized: requesting-user-name="root"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [10/Oct/2022:17:20:07 +0200] [Client 5] Content-Length: 127
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] con->http=0x5574db15c320
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x5574db130900(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:07 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] bytes=0, http_state=0, data_remaining=127
D [10/Oct/2022:17:20:07 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:17:20:07 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:07 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:17:20:07 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:17:20:07 +0200] [Client 5] 2.0 Get-Notifications 11
D [10/Oct/2022:17:20:07 +0200] Get-Notifications /
D [10/Oct/2022:17:20:07 +0200] cupsdIsAuthorized: requesting-user-name="root"
D [10/Oct/2022:17:20:07 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [10/Oct/2022:17:20:07 +0200] [Client 5] Content-Length: 127
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] con->http=0x5574db15c320
D [10/Oct/2022:17:20:07 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x5574db137110(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:07 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:07 +0200] [Client 5] bytes=0, http_state=0, data_remaining=127
D [10/Oct/2022:17:20:07 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:17:20:07 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:07 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:17:20:07 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:08 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:17:20:08 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:08 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:17:20:08 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:17:20:08 +0200] [Client 5] 2.0 Get-Notifications 12
D [10/Oct/2022:17:20:08 +0200] Get-Notifications /
D [10/Oct/2022:17:20:08 +0200] cupsdIsAuthorized: requesting-user-name="root"
D [10/Oct/2022:17:20:08 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [10/Oct/2022:17:20:08 +0200] [Client 5] Content-Length: 127
D [10/Oct/2022:17:20:08 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [10/Oct/2022:17:20:08 +0200] Expiring subscriptions...
D [10/Oct/2022:17:20:08 +0200] [Client 5] con->http=0x5574db15c320
D [10/Oct/2022:17:20:08 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x5574db134030(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:08 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:08 +0200] [Client 5] bytes=0, http_state=0, data_remaining=127
D [10/Oct/2022:17:20:08 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:17:20:08 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:08 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:17:20:08 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:08 +0200] [Client 5] POST / HTTP/1.1
D [10/Oct/2022:17:20:08 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:08 +0200] [Client 5] Read: status=200, state=6
D [10/Oct/2022:17:20:08 +0200] [Client 5] No authentication data provided.
D [10/Oct/2022:17:20:08 +0200] [Client 5] 2.0 Get-Notifications 13
D [10/Oct/2022:17:20:08 +0200] Get-Notifications /
D [10/Oct/2022:17:20:08 +0200] cupsdIsAuthorized: requesting-user-name="root"
D [10/Oct/2022:17:20:08 +0200] [Client 5] Returning IPP successful-ok for Get-Notifications (/) from localhost.
D [10/Oct/2022:17:20:08 +0200] [Client 5] Content-Length: 127
D [10/Oct/2022:17:20:08 +0200] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:08 +0200] [Client 5] con->http=0x5574db15c320
D [10/Oct/2022:17:20:08 +0200] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=127, response=0x5574db1327f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:08 +0200] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:08 +0200] [Client 5] bytes=0, http_state=0, data_remaining=127
D [10/Oct/2022:17:20:08 +0200] [Client 5] Flushing write buffer.
D [10/Oct/2022:17:20:08 +0200] [Client 5] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:08 +0200] [Client 5] Waiting for request.
D [10/Oct/2022:17:20:08 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:08 +0200] [Client 4] CGI data ready to be sent.
D [10/Oct/2022:17:20:08 +0200] [Client 4] con->http=0x5574db154910
D [10/Oct/2022:17:20:08 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=1099, file=16
D [10/Oct/2022:17:20:08 +0200] [Client 4] Waiting for CGI data.
D [10/Oct/2022:17:20:08 +0200] [Client 4] con->http=0x5574db154910
D [10/Oct/2022:17:20:08 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=1099, file=16
D [10/Oct/2022:17:20:08 +0200] [Client 4] Waiting for CGI data.
D [10/Oct/2022:17:20:08 +0200] [Client 4] CGI data ready to be sent.
D [10/Oct/2022:17:20:08 +0200] [Client 4] con->http=0x5574db154910
D [10/Oct/2022:17:20:08 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=1099, file=16
D [10/Oct/2022:17:20:08 +0200] [Client 4] Waiting for CGI data.
D [10/Oct/2022:17:20:08 +0200] [Client 4] Sending 0-length chunk.
D [10/Oct/2022:17:20:08 +0200] [Client 4] Flushing write buffer.
D [10/Oct/2022:17:20:08 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:08 +0200] [Client 4] Waiting for request.
D [10/Oct/2022:17:20:08 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:08 +0200] PID 1099 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [10/Oct/2022:17:20:08 +0200] [Client 4] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:20:08 +0200] [Client 4] Closing connection.
D [10/Oct/2022:17:20:08 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:17:20:08 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:17:20:08 +0200] [Client 7] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:20:08 +0200] [Client 7] Accepted from localhost (Domain)
D [10/Oct/2022:17:20:08 +0200] [Client 7] Waiting for request.
D [10/Oct/2022:17:20:08 +0200] [Client 7] POST / HTTP/1.1
D [10/Oct/2022:17:20:08 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:08 +0200] [Client 7] Read: status=200, state=6
D [10/Oct/2022:17:20:08 +0200] [Client 7] No authentication data provided.
D [10/Oct/2022:17:20:08 +0200] [Client 7] 2.0 CUPS-Get-Printers 2
D [10/Oct/2022:17:20:08 +0200] CUPS-Get-Printers
D [10/Oct/2022:17:20:08 +0200] [Client 7] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:17:20:08 +0200] [Client 7] Content-Length: 469
D [10/Oct/2022:17:20:08 +0200] [Client 7] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:08 +0200] [Client 7] con->http=0x5574db154910
D [10/Oct/2022:17:20:08 +0200] [Client 7] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=469, response=0x5574db1392c0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:08 +0200] [Client 7] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:08 +0200] [Client 7] bytes=0, http_state=0, data_remaining=469
D [10/Oct/2022:17:20:08 +0200] [Client 7] Flushing write buffer.
D [10/Oct/2022:17:20:08 +0200] [Client 7] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:08 +0200] [Client 7] Waiting for request.
D [10/Oct/2022:17:20:08 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:08 +0200] [Client 7] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:20:08 +0200] [Client 7] Closing connection.
D [10/Oct/2022:17:20:08 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:17:20:08 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:17:20:08 +0200] [Client 8] Server address is "192.168.1.93".
D [10/Oct/2022:17:20:08 +0200] [Client 8] Accepted from 192.168.1.65:42742 (IPv4)
D [10/Oct/2022:17:20:08 +0200] [Client 8] Waiting for request.
D [10/Oct/2022:17:20:08 +0200] [CGI] ippfind (PID 1113) exited with no errors.
D [10/Oct/2022:17:20:08 +0200] [Client 8] Connection now encrypted.
D [10/Oct/2022:17:20:08 +0200] [Client 8] POST /printers/DCPL2500D HTTP/1.1
D [10/Oct/2022:17:20:08 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:08 +0200] [Client 8] Read: status=200, state=6
D [10/Oct/2022:17:20:08 +0200] [Client 8] No authentication data provided.
D [10/Oct/2022:17:20:08 +0200] cupsdNetIFUpdate: Ignoring "lo".
D [10/Oct/2022:17:20:08 +0200] cupsdNetIFUpdate: Ignoring "eno1".
D [10/Oct/2022:17:20:08 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [10/Oct/2022:17:20:08 +0200] cupsdNetIFUpdate: "eno1" = 192.168.1.93:631
D [10/Oct/2022:17:20:08 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [10/Oct/2022:17:20:08 +0200] cupsdNetIFUpdate: "eno1" = [v1.fe80::16c9:44a7:b32f:3577+eno1]:631
D [10/Oct/2022:17:20:08 +0200] [Client 8] Read: status=100, state=6
D [10/Oct/2022:17:20:08 +0200] [Client 8] 2.0 Get-Printer-Attributes 7
D [10/Oct/2022:17:20:08 +0200] Get-Printer-Attributes ipps://isaric-p6-2007frm.local:631/printers/DCPL2500D
D [10/Oct/2022:17:20:08 +0200] [Client 8] Returning IPP successful-ok for Get-Printer-Attributes (ipps://isaric-p6-2007frm.local:631/printers/DCPL2500D) from 192.168.1.65.
D [10/Oct/2022:17:20:08 +0200] [Client 8] Content-Length: 13692
D [10/Oct/2022:17:20:08 +0200] [Client 8] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:08 +0200] [Client 8] con->http=0x5574db154910
D [10/Oct/2022:17:20:08 +0200] [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=13692, response=0x5574db134a40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:08 +0200] [Client 8] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:08 +0200] [Client 8] bytes=0, http_state=0, data_remaining=13692
D [10/Oct/2022:17:20:08 +0200] [Client 8] Flushing write buffer.
D [10/Oct/2022:17:20:08 +0200] [Client 8] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:08 +0200] [Client 8] Waiting for request.
D [10/Oct/2022:17:20:08 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:08 +0200] [Client 8] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:20:08 +0200] [Client 8] Closing connection.
D [10/Oct/2022:17:20:08 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:17:20:08 +0200] [Client 8] Waiting for socket close.
D [10/Oct/2022:17:20:08 +0200] [Client 8] Closing on EOF.
D [10/Oct/2022:17:20:08 +0200] [Client 8] Closing connection.
D [10/Oct/2022:17:20:08 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [10/Oct/2022:17:20:09 +0200] Expiring subscriptions...
D [10/Oct/2022:17:20:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:17:20:32 +0200] [Client 9] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:20:32 +0200] [Client 9] Accepted from localhost (Domain)
D [10/Oct/2022:17:20:32 +0200] [Client 9] Waiting for request.
I [10/Oct/2022:17:20:32 +0200] Expiring subscriptions...
D [10/Oct/2022:17:20:32 +0200] [Client 9] POST / HTTP/1.1
D [10/Oct/2022:17:20:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=200, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] No authentication data provided.
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] 2.0 CUPS-Get-Default 1
D [10/Oct/2022:17:20:32 +0200] CUPS-Get-Default
D [10/Oct/2022:17:20:32 +0200] [Client 9] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:17:20:32 +0200] [Client 9] Content-Length: 10329
D [10/Oct/2022:17:20:32 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:32 +0200] [Client 9] con->http=0x5574db154910
D [10/Oct/2022:17:20:32 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10329, response=0x5574db132a10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:32 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:32 +0200] [Client 9] bytes=0, http_state=0, data_remaining=10329
D [10/Oct/2022:17:20:32 +0200] [Client 9] Flushing write buffer.
D [10/Oct/2022:17:20:32 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:32 +0200] [Client 9] Waiting for request.
D [10/Oct/2022:17:20:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:32 +0200] [Client 9] POST / HTTP/1.1
D [10/Oct/2022:17:20:32 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=200, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] No authentication data provided.
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] Read: status=100, state=6
D [10/Oct/2022:17:20:32 +0200] [Client 9] 2.0 CUPS-Get-Printers 2
D [10/Oct/2022:17:20:32 +0200] CUPS-Get-Printers
D [10/Oct/2022:17:20:32 +0200] [Client 9] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:17:20:32 +0200] [Client 9] Content-Length: 3004
D [10/Oct/2022:17:20:32 +0200] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:32 +0200] [Client 9] con->http=0x5574db154910
D [10/Oct/2022:17:20:32 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x5574db147dc0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:32 +0200] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:32 +0200] [Client 9] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:17:20:32 +0200] [Client 9] Flushing write buffer.
D [10/Oct/2022:17:20:32 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:32 +0200] [Client 9] Waiting for request.
D [10/Oct/2022:17:20:32 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:33 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:17:20:33 +0200] [Client 10] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:20:33 +0200] [Client 10] Accepted from localhost (Domain)
D [10/Oct/2022:17:20:33 +0200] [Client 10] Waiting for request.
I [10/Oct/2022:17:20:33 +0200] Expiring subscriptions...
D [10/Oct/2022:17:20:33 +0200] [Client 10] POST / HTTP/1.1
D [10/Oct/2022:17:20:33 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=200, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] No authentication data provided.
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] Read: status=100, state=6
D [10/Oct/2022:17:20:33 +0200] [Client 10] 2.0 Create-Printer-Subscriptions 3
D [10/Oct/2022:17:20:33 +0200] Create-Printer-Subscriptions /
D [10/Oct/2022:17:20:33 +0200] create_subscriptions(con=0x5574db1646d0(10), uri="/")
D [10/Oct/2022:17:20:33 +0200] recipient="dbus://"
D [10/Oct/2022:17:20:33 +0200] pullmethod="ippget"
D [10/Oct/2022:17:20:33 +0200] notify-lease-duration=3600
D [10/Oct/2022:17:20:33 +0200] notify-time-interval=0
D [10/Oct/2022:17:20:33 +0200] cupsdAddSubscription(mask=798f, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [10/Oct/2022:17:20:33 +0200] Added subscription #5318 for server.
D [10/Oct/2022:17:20:33 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:17:20:33 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:33 +0200] [Client 10] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [10/Oct/2022:17:20:33 +0200] [Client 10] Content-Length: 107
D [10/Oct/2022:17:20:33 +0200] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:20:33 +0200] [Client 10] con->http=0x5574db168fd0
D [10/Oct/2022:17:20:33 +0200] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x5574db132a10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:20:33 +0200] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:20:33 +0200] [Client 10] bytes=0, http_state=0, data_remaining=107
D [10/Oct/2022:17:20:33 +0200] [Client 10] Flushing write buffer.
D [10/Oct/2022:17:20:33 +0200] [Client 10] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:20:33 +0200] [Client 10] Waiting for request.
D [10/Oct/2022:17:20:33 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:20:33 +0200] [Client 10] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:20:33 +0200] [Client 10] Closing connection.
D [10/Oct/2022:17:20:33 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [10/Oct/2022:17:20:34 +0200] Expiring subscriptions...
I [10/Oct/2022:17:20:38 +0200] Saving subscriptions.conf...
D [10/Oct/2022:17:20:38 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [10/Oct/2022:17:20:38 +0200] Expiring subscriptions...
D [10/Oct/2022:17:21:47 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:21:47 +0200] [Client 11] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:21:47 +0200] [Client 11] Accepted from localhost (Domain)
D [10/Oct/2022:17:21:47 +0200] [Client 11] Waiting for request.
I [10/Oct/2022:17:21:47 +0200] Expiring subscriptions...
D [10/Oct/2022:17:21:47 +0200] Report: clients=4
D [10/Oct/2022:17:21:47 +0200] Report: jobs=460
D [10/Oct/2022:17:21:47 +0200] Report: jobs-active=0
D [10/Oct/2022:17:21:47 +0200] Report: printers=2
D [10/Oct/2022:17:21:47 +0200] Report: stringpool-string-count=1379
D [10/Oct/2022:17:21:47 +0200] Report: stringpool-alloc-bytes=11536
D [10/Oct/2022:17:21:47 +0200] Report: stringpool-total-bytes=26952
D [10/Oct/2022:17:21:47 +0200] [Client 11] POST / HTTP/1.1
D [10/Oct/2022:17:21:47 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=200, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] No authentication data provided.
D [10/Oct/2022:17:21:47 +0200] [Client 11] 2.0 CUPS-Get-Default 1
D [10/Oct/2022:17:21:47 +0200] CUPS-Get-Default
D [10/Oct/2022:17:21:47 +0200] [Client 11] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:17:21:47 +0200] [Client 11] Content-Length: 10329
D [10/Oct/2022:17:21:47 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:21:47 +0200] [Client 11] con->http=0x5574db168fd0
D [10/Oct/2022:17:21:47 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10329, response=0x5574db148130(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:21:47 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:21:47 +0200] [Client 11] bytes=0, http_state=0, data_remaining=10329
D [10/Oct/2022:17:21:47 +0200] [Client 11] Flushing write buffer.
D [10/Oct/2022:17:21:47 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:21:47 +0200] [Client 11] Waiting for request.
D [10/Oct/2022:17:21:47 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:21:47 +0200] [Client 11] POST / HTTP/1.1
D [10/Oct/2022:17:21:47 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=200, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] No authentication data provided.
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] Read: status=100, state=6
D [10/Oct/2022:17:21:47 +0200] [Client 11] 2.0 CUPS-Get-Printers 2
D [10/Oct/2022:17:21:47 +0200] CUPS-Get-Printers
D [10/Oct/2022:17:21:47 +0200] [Client 11] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:17:21:47 +0200] [Client 11] Content-Length: 3004
D [10/Oct/2022:17:21:47 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:21:47 +0200] [Client 11] con->http=0x5574db168fd0
D [10/Oct/2022:17:21:47 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x5574db170920(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:21:47 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:21:47 +0200] [Client 11] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:17:21:47 +0200] [Client 11] Flushing write buffer.
D [10/Oct/2022:17:21:47 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:21:47 +0200] [Client 11] Waiting for request.
D [10/Oct/2022:17:21:47 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:21:48 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:21:48 +0200] [Client 12] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:21:48 +0200] [Client 12] Accepted from localhost (Domain)
D [10/Oct/2022:17:21:48 +0200] [Client 12] Waiting for request.
I [10/Oct/2022:17:21:48 +0200] Expiring subscriptions...
D [10/Oct/2022:17:21:48 +0200] [Client 12] POST / HTTP/1.1
D [10/Oct/2022:17:21:48 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:17:21:48 +0200] [Client 12] Read: status=200, state=6
D [10/Oct/2022:17:21:48 +0200] [Client 12] No authentication data provided.
D [10/Oct/2022:17:21:48 +0200] [Client 12] 2.0 Create-Printer-Subscriptions 3
D [10/Oct/2022:17:21:48 +0200] Create-Printer-Subscriptions /
D [10/Oct/2022:17:21:48 +0200] create_subscriptions(con=0x5574db16c730(12), uri="/")
D [10/Oct/2022:17:21:48 +0200] recipient="dbus://"
D [10/Oct/2022:17:21:48 +0200] pullmethod="ippget"
D [10/Oct/2022:17:21:48 +0200] notify-lease-duration=3600
D [10/Oct/2022:17:21:48 +0200] notify-time-interval=0
D [10/Oct/2022:17:21:48 +0200] cupsdAddSubscription(mask=798f, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [10/Oct/2022:17:21:48 +0200] Added subscription #5319 for server.
D [10/Oct/2022:17:21:48 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:17:21:48 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [10/Oct/2022:17:21:48 +0200] [Client 12] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [10/Oct/2022:17:21:48 +0200] [Client 12] Content-Length: 107
D [10/Oct/2022:17:21:48 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:21:48 +0200] [Client 12] con->http=0x5574db170ca0
D [10/Oct/2022:17:21:48 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x5574db1392c0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:21:48 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:21:48 +0200] [Client 12] bytes=0, http_state=0, data_remaining=107
D [10/Oct/2022:17:21:48 +0200] [Client 12] Flushing write buffer.
D [10/Oct/2022:17:21:48 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:21:48 +0200] [Client 12] Waiting for request.
D [10/Oct/2022:17:21:48 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:21:48 +0200] [Client 12] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:21:48 +0200] [Client 12] Closing connection.
D [10/Oct/2022:17:21:48 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [10/Oct/2022:17:21:49 +0200] Expiring subscriptions...
D [10/Oct/2022:17:21:55 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:17:21:55 +0200] [Client 13] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:21:55 +0200] [Client 13] Accepted from localhost (Domain)
D [10/Oct/2022:17:21:55 +0200] [Client 13] Waiting for request.
I [10/Oct/2022:17:21:55 +0200] Expiring subscriptions...
D [10/Oct/2022:17:21:55 +0200] [Client 13] POST / HTTP/1.1
D [10/Oct/2022:17:21:55 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:21:55 +0200] [Client 13] Read: status=200, state=6
D [10/Oct/2022:17:21:55 +0200] [Client 13] No authentication data provided.
D [10/Oct/2022:17:21:55 +0200] [Client 13] 2.0 Cancel-Subscription 4
D [10/Oct/2022:17:21:55 +0200] Cancel-Subscription /
D [10/Oct/2022:17:21:55 +0200] cupsdIsAuthorized: requesting-user-name="gdm"
D [10/Oct/2022:17:21:55 +0200] cupsdMarkDirty(----S)
D [10/Oct/2022:17:21:55 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:21:55 +0200] [Client 13] Returning IPP successful-ok for Cancel-Subscription (/) from localhost.
D [10/Oct/2022:17:21:55 +0200] [Client 13] Content-Length: 75
D [10/Oct/2022:17:21:55 +0200] [Client 13] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:21:55 +0200] [Client 13] con->http=0x5574db170ca0
D [10/Oct/2022:17:21:55 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x5574db153240(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:21:55 +0200] [Client 13] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:21:55 +0200] [Client 13] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:17:21:55 +0200] [Client 13] Flushing write buffer.
D [10/Oct/2022:17:21:55 +0200] [Client 13] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:21:55 +0200] [Client 13] Waiting for request.
D [10/Oct/2022:17:21:55 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:21:55 +0200] [Client 13] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:21:55 +0200] [Client 13] Closing connection.
D [10/Oct/2022:17:21:55 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:17:21:55 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [10/Oct/2022:17:21:55 +0200] [Client 14] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:21:55 +0200] [Client 14] Accepted from localhost (Domain)
D [10/Oct/2022:17:21:55 +0200] [Client 14] Waiting for request.
D [10/Oct/2022:17:21:55 +0200] [Client 14] POST / HTTP/1.1
D [10/Oct/2022:17:21:55 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:21:55 +0200] [Client 14] Read: status=200, state=6
D [10/Oct/2022:17:21:55 +0200] [Client 14] No authentication data provided.
D [10/Oct/2022:17:21:55 +0200] [Client 14] 2.0 Cancel-Subscription 5
D [10/Oct/2022:17:21:55 +0200] Cancel-Subscription /
D [10/Oct/2022:17:21:55 +0200] Cancel-Subscription client-error-not-found: Subscription #5318 does not exist.
D [10/Oct/2022:17:21:55 +0200] [Client 14] Returning IPP client-error-not-found for Cancel-Subscription (/) from localhost.
D [10/Oct/2022:17:21:55 +0200] [Client 14] Content-Length: 128
D [10/Oct/2022:17:21:55 +0200] [Client 14] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:21:55 +0200] [Client 14] con->http=0x5574db170ca0
D [10/Oct/2022:17:21:55 +0200] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=128, response=0x5574db137110(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:21:55 +0200] [Client 14] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:21:55 +0200] [Client 14] bytes=0, http_state=0, data_remaining=128
D [10/Oct/2022:17:21:55 +0200] [Client 14] Flushing write buffer.
D [10/Oct/2022:17:21:55 +0200] [Client 14] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:21:55 +0200] [Client 14] Waiting for request.
D [10/Oct/2022:17:21:55 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [10/Oct/2022:17:21:55 +0200] [Client 14] HTTP_STATE_WAITING Closing for error 104 (Connection reset by peer)
D [10/Oct/2022:17:21:55 +0200] [Client 14] Closing connection.
D [10/Oct/2022:17:21:55 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [10/Oct/2022:17:21:55 +0200] [Client 9] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:21:55 +0200] [Client 9] Closing connection.
D [10/Oct/2022:17:21:55 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [10/Oct/2022:17:21:56 +0200] Expiring subscriptions...
I [10/Oct/2022:17:22:19 +0200] Saving subscriptions.conf...
D [10/Oct/2022:17:22:19 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [10/Oct/2022:17:22:19 +0200] Expiring subscriptions...
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:28:18 +0200] [Client 15] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:28:18 +0200] [Client 15] Accepted from localhost (Domain)
D [10/Oct/2022:17:28:18 +0200] [Client 15] Waiting for request.
I [10/Oct/2022:17:28:18 +0200] Expiring subscriptions...
D [10/Oct/2022:17:28:18 +0200] cupsdAddCert: Adding certificate for PID 0
D [10/Oct/2022:17:28:18 +0200] Report: clients=4
D [10/Oct/2022:17:28:18 +0200] Report: jobs=460
D [10/Oct/2022:17:28:18 +0200] Report: jobs-active=0
D [10/Oct/2022:17:28:18 +0200] Report: printers=2
D [10/Oct/2022:17:28:18 +0200] Report: stringpool-string-count=1379
D [10/Oct/2022:17:28:18 +0200] Report: stringpool-alloc-bytes=11536
D [10/Oct/2022:17:28:18 +0200] Report: stringpool-total-bytes=26952
D [10/Oct/2022:17:28:18 +0200] [Client 15] POST / HTTP/1.1
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=200, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] No authentication data provided.
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=100, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=100, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=100, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=100, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] 2.0 CUPS-Get-Default 1
D [10/Oct/2022:17:28:18 +0200] CUPS-Get-Default
D [10/Oct/2022:17:28:18 +0200] [Client 15] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:17:28:18 +0200] [Client 15] Content-Length: 10329
D [10/Oct/2022:17:28:18 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:28:18 +0200] [Client 15] con->http=0x5574db154910
D [10/Oct/2022:17:28:18 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10329, response=0x5574db132a10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:28:18 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:28:18 +0200] [Client 15] bytes=0, http_state=0, data_remaining=10329
D [10/Oct/2022:17:28:18 +0200] [Client 15] Flushing write buffer.
D [10/Oct/2022:17:28:18 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:28:18 +0200] [Client 15] Waiting for request.
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:28:18 +0200] [Client 15] POST / HTTP/1.1
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=200, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] No authentication data provided.
D [10/Oct/2022:17:28:18 +0200] [Client 15] 2.0 CUPS-Get-Printers 2
D [10/Oct/2022:17:28:18 +0200] CUPS-Get-Printers
D [10/Oct/2022:17:28:18 +0200] [Client 15] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:17:28:18 +0200] [Client 15] Content-Length: 3004
D [10/Oct/2022:17:28:18 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:28:18 +0200] [Client 15] con->http=0x5574db154910
D [10/Oct/2022:17:28:18 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x5574db147dc0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:28:18 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:28:18 +0200] [Client 15] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:17:28:18 +0200] [Client 15] Flushing write buffer.
D [10/Oct/2022:17:28:18 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:28:18 +0200] [Client 15] Waiting for request.
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:28:18 +0200] [Client 16] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:28:18 +0200] [Client 16] Accepted from localhost (Domain)
D [10/Oct/2022:17:28:18 +0200] [Client 16] Waiting for request.
D [10/Oct/2022:17:28:18 +0200] [Client 15] POST / HTTP/1.1
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=200, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] No authentication data provided.
D [10/Oct/2022:17:28:18 +0200] [Client 15] 2.0 CUPS-Get-Classes 3
D [10/Oct/2022:17:28:18 +0200] CUPS-Get-Classes
D [10/Oct/2022:17:28:18 +0200] [Client 15] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [10/Oct/2022:17:28:18 +0200] [Client 15] Content-Length: 75
D [10/Oct/2022:17:28:18 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:28:18 +0200] [Client 15] con->http=0x5574db154910
D [10/Oct/2022:17:28:18 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x5574db148130(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:28:18 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:28:18 +0200] [Client 15] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:17:28:18 +0200] [Client 15] Flushing write buffer.
D [10/Oct/2022:17:28:18 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:28:18 +0200] [Client 15] Waiting for request.
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:28:18 +0200] [Client 16] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:28:18 +0200] [Client 16] Closing connection.
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [10/Oct/2022:17:28:18 +0200] [Client 15] POST / HTTP/1.1
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=200, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] No authentication data provided.
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=100, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=100, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=100, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=100, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=100, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=100, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=100, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=100, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] 2.0 CUPS-Get-Printers 4
D [10/Oct/2022:17:28:18 +0200] CUPS-Get-Printers
D [10/Oct/2022:17:28:18 +0200] [Client 15] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:17:28:18 +0200] [Client 15] Content-Length: 391
D [10/Oct/2022:17:28:18 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:28:18 +0200] [Client 15] con->http=0x5574db154910
D [10/Oct/2022:17:28:18 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=391, response=0x5574db139e80(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:28:18 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:28:18 +0200] [Client 15] bytes=0, http_state=0, data_remaining=391
D [10/Oct/2022:17:28:18 +0200] [Client 15] Flushing write buffer.
D [10/Oct/2022:17:28:18 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:28:18 +0200] [Client 15] Waiting for request.
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:28:18 +0200] [Client 15] POST / HTTP/1.1
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=200, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] No authentication data provided.
D [10/Oct/2022:17:28:18 +0200] [Client 15] 2.0 CUPS-Get-Printers 5
D [10/Oct/2022:17:28:18 +0200] CUPS-Get-Printers
D [10/Oct/2022:17:28:18 +0200] [Client 15] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:17:28:18 +0200] [Client 15] Content-Length: 365
D [10/Oct/2022:17:28:18 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:28:18 +0200] [Client 15] con->http=0x5574db154910
D [10/Oct/2022:17:28:18 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=365, response=0x5574db134030(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:28:18 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:28:18 +0200] [Client 15] bytes=0, http_state=0, data_remaining=365
D [10/Oct/2022:17:28:18 +0200] [Client 15] Flushing write buffer.
D [10/Oct/2022:17:28:18 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:28:18 +0200] [Client 15] Waiting for request.
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:28:18 +0200] [Client 15] POST / HTTP/1.1
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=200, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] No authentication data provided.
D [10/Oct/2022:17:28:18 +0200] [Client 15] 2.0 CUPS-Get-Printers 6
D [10/Oct/2022:17:28:18 +0200] CUPS-Get-Printers
D [10/Oct/2022:17:28:18 +0200] [Client 15] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:17:28:18 +0200] [Client 15] Content-Length: 820
D [10/Oct/2022:17:28:18 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:28:18 +0200] [Client 15] con->http=0x5574db154910
D [10/Oct/2022:17:28:18 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=820, response=0x5574db139e80(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:28:18 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:28:18 +0200] [Client 15] bytes=0, http_state=0, data_remaining=820
D [10/Oct/2022:17:28:18 +0200] [Client 15] Flushing write buffer.
D [10/Oct/2022:17:28:18 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:28:18 +0200] [Client 15] Waiting for request.
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:28:18 +0200] [Client 15] POST / HTTP/1.1
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:28:18 +0200] [Client 15] Read: status=200, state=6
D [10/Oct/2022:17:28:18 +0200] [Client 15] No authentication data provided.
D [10/Oct/2022:17:28:18 +0200] [Client 15] 2.0 Get-Jobs 7
D [10/Oct/2022:17:28:18 +0200] Get-Jobs ipp://localhost/
D [10/Oct/2022:17:28:18 +0200] [Client 15] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost.
D [10/Oct/2022:17:28:18 +0200] [Client 15] Content-Length: 75
D [10/Oct/2022:17:28:18 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:28:18 +0200] [Client 15] con->http=0x5574db154910
D [10/Oct/2022:17:28:18 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x5574db16ef70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:28:18 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:28:18 +0200] [Client 15] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:17:28:18 +0200] [Client 15] Flushing write buffer.
D [10/Oct/2022:17:28:18 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:28:18 +0200] [Client 15] Waiting for request.
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:28:18 +0200] [Client 15] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:28:18 +0200] [Client 15] Closing connection.
D [10/Oct/2022:17:28:18 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [10/Oct/2022:17:28:19 +0200] Expiring subscriptions...
D [10/Oct/2022:17:28:45 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:28:45 +0200] [Client 17] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:28:45 +0200] [Client 17] Accepted from localhost (Domain)
D [10/Oct/2022:17:28:45 +0200] [Client 17] Waiting for request.
I [10/Oct/2022:17:28:45 +0200] Expiring subscriptions...
D [10/Oct/2022:17:28:45 +0200] [Client 17] POST / HTTP/1.1
D [10/Oct/2022:17:28:45 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:17:28:45 +0200] [Client 17] Read: status=200, state=6
D [10/Oct/2022:17:28:45 +0200] [Client 17] No authentication data provided.
D [10/Oct/2022:17:28:45 +0200] [Client 17] 2.0 CUPS-Get-Devices 1
D [10/Oct/2022:17:28:45 +0200] CUPS-Get-Devices
D [10/Oct/2022:17:28:45 +0200] cupsdIsAuthorized: username=""
D [10/Oct/2022:17:28:45 +0200] [Client 17] Returning HTTP Non autorisé for CUPS-Get-Devices (no URI) from localhost
D [10/Oct/2022:17:28:45 +0200] [Client 17] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [10/Oct/2022:17:28:45 +0200] [Client 17] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D [10/Oct/2022:17:28:45 +0200] [Client 17] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:28:45 +0200] [Client 17] Closing connection.
D [10/Oct/2022:17:28:45 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:28:45 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:28:45 +0200] [Client 18] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:28:45 +0200] [Client 18] Accepted from localhost (Domain)
D [10/Oct/2022:17:28:45 +0200] [Client 18] Waiting for request.
D [10/Oct/2022:17:28:45 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:17:28:45 +0200] [Client 19] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:28:45 +0200] [Client 19] Accepted from localhost (Domain)
D [10/Oct/2022:17:28:45 +0200] [Client 19] Waiting for request.
D [10/Oct/2022:17:28:45 +0200] [Client 18] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:28:45 +0200] [Client 18] Closing connection.
D [10/Oct/2022:17:28:45 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:28:45 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:28:45 +0200] [Client 20] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:28:45 +0200] [Client 20] Accepted from localhost (Domain)
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for request.
D [10/Oct/2022:17:28:45 +0200] [Client 19] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:28:45 +0200] [Client 19] Closing connection.
D [10/Oct/2022:17:28:45 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:28:45 +0200] [Client 20] POST / HTTP/1.1
D [10/Oct/2022:17:28:45 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:28:45 +0200] [Client 20] Read: status=200, state=6
D [10/Oct/2022:17:28:45 +0200] [Client 20] Authorized as isaric using PeerCred.
D [10/Oct/2022:17:28:45 +0200] [Client 20] 2.0 CUPS-Get-Devices 1
D [10/Oct/2022:17:28:45 +0200] CUPS-Get-Devices
D [10/Oct/2022:17:28:45 +0200] cupsdIsAuthorized: username="isaric"
D [10/Oct/2022:17:28:45 +0200] [Client 20] AppArmor profile is 'unconfined'.
D [10/Oct/2022:17:28:45 +0200] [Client 20] Not a snap - allowed.
D [10/Oct/2022:17:28:45 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [10/Oct/2022:17:28:45 +0200] [CGI] argv[1] = "1"
D [10/Oct/2022:17:28:45 +0200] [CGI] argv[2] = "0"
D [10/Oct/2022:17:28:45 +0200] [CGI] argv[3] = "15"
D [10/Oct/2022:17:28:45 +0200] [CGI] argv[4] = "7"
D [10/Oct/2022:17:28:45 +0200] [CGI] argv[5] = "requested-attributes=all"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[3] = "CUPS_REQUESTROOT=/var/spool/cups"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[4] = "CUPS_SERVERBIN=/usr/lib/cups"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[5] = "CUPS_SERVERROOT=/etc/cups"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[6] = "CUPS_STATEDIR=/run/cups"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[7] = "HOME=/var/spool/cups/tmp"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[8] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[9] = "SERVER_ADMIN=root@isaric-p6-2007frm"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[10] = "SOFTWARE=CUPS/2.4.1"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[11] = "TMPDIR=/var/spool/cups/tmp"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[12] = "USER=root"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[13] = "CUPS_MAX_MESSAGE=2047"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[14] = "CUPS_SERVER=/run/cups/cups.sock"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[16] = "IPP_PORT=631"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[18] = "LANG=fr_FR.UTF8"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[22] = "SERVER_PORT=631"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[23] = "REMOTE_ADDR=localhost"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[25] = "SCRIPT_NAME=/"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[27] = "REMOTE_USER=isaric"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/2.4.1 (Linux 5.15.0-50-generic; x86_64) IPP/2.0"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[30] = "REQUEST_METHOD=POST"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[31] = "CONTENT_LENGTH=75"
D [10/Oct/2022:17:28:45 +0200] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D [10/Oct/2022:17:28:45 +0200] cupsdAddCert: Adding certificate for PID 5070
D [10/Oct/2022:17:28:45 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 5070)
I [10/Oct/2022:17:28:45 +0200] [Client 20] Started "/usr/lib/cups/daemon/cups-deviced" (pid=5070, file=19)
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/bluetooth (PID 5071)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/snmp (PID 5072)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipp (PID 5073)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/hpfax (PID 5074)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/cups-brf (PID 5075)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/driverless-fax (PID 5076)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/driverless (PID 5077)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 5078)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/beh (PID 5079)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/hp (PID 5080)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/parallel (PID 5081)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/implicitclass (PID 5082)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/socket (PID 5083)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/dnssd (PID 5084)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/http (PID 5085)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/lpd (PID 5086)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 5087)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/https (PID 5088)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 5089)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 5090)
D [10/Oct/2022:17:28:45 +0200] [Client 20] CGI data ready to be sent.
D [10/Oct/2022:17:28:45 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Found device \"cups-brf:/\"...
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [Client 20] Script header: Content-Type: application/ipp
D [10/Oct/2022:17:28:45 +0200] [Client 20] Script header: 
D [10/Oct/2022:17:28:45 +0200] [Client 20] Sending status 200 for CGI.
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5075 (cups-brf) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5071 (bluetooth) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [CGI] Loading USB quirks from \"/usr/share/cups/usb\".
D [10/Oct/2022:17:28:45 +0200] [CGI] Loaded 118 quirks.
D [10/Oct/2022:17:28:45 +0200] [CGI] list_devices
D [10/Oct/2022:17:28:45 +0200] [Client 20] CGI data ready to be sent.
D [10/Oct/2022:17:28:45 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Found device \"beh\"...
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5079 (beh) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [Client 20] CGI data ready to be sent.
D [10/Oct/2022:17:28:45 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Found device \"lpd\"...
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [Client 20] CGI data ready to be sent.
D [10/Oct/2022:17:28:45 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Found device \"hp\"...
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5086 (lpd) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5080 (hp) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [CGI] libusb_get_device_list=9
D [10/Oct/2022:17:28:45 +0200] [Client 20] CGI data ready to be sent.
D [10/Oct/2022:17:28:45 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Found device \"ipp\"...
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5073 (ipp) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [Client 20] CGI data ready to be sent.
D [10/Oct/2022:17:28:45 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Found device \"socket\"...
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5083 (socket) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [Client 20] CGI data ready to be sent.
D [10/Oct/2022:17:28:45 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Found device \"usb://Brother/DCP-L2500D%20series?serial=E73908D7N915582\"...
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [CGI] Started ippfind (PID 5095)
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5081 (parallel) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5087 (usb) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [Client 20] CGI data ready to be sent.
D [10/Oct/2022:17:28:45 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Found device \"https\"...
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5082 (implicitclass) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [Client 20] CGI data ready to be sent.
D [10/Oct/2022:17:28:45 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Found device \"ipps\"...
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5078 (ipps) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5090 (mdns) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [Client 20] CGI data ready to be sent.
D [10/Oct/2022:17:28:45 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Found device \"http\"...
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5085 (http) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5088 (https) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5076 (driverless-fax) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5089 (serial) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:28:45 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:28:45 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:28:45 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:28:45 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:28:45 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:28:45 +0200] [Client 20] CGI data ready to be sent.
D [10/Oct/2022:17:28:45 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] Found device \"hpfax\"...
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:45 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:45 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:45 +0200] [cups-deviced] PID 5074 (hpfax) exited with no errors.
D [10/Oct/2022:17:28:45 +0200] [CGI] sent=0, count=0
D [10/Oct/2022:17:28:46 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
I [10/Oct/2022:17:28:46 +0200] Expiring subscriptions...
D [10/Oct/2022:17:28:46 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:28:46 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:28:46 +0200] [CGI] sent=0, count=0
D [10/Oct/2022:17:28:46 +0200] [cups-deviced] PID 5084 (dnssd) exited with no errors.
D [10/Oct/2022:17:28:47 +0200] [cups-deviced] PID 5072 (snmp) exited with no errors.
I [10/Oct/2022:17:28:47 +0200] Expiring subscriptions...
D [10/Oct/2022:17:28:47 +0200] [CGI] ippfind (PID 5095) exited with no errors.
D [10/Oct/2022:17:28:47 +0200] [cups-deviced] PID 5077 (driverless) exited with no errors.
D [10/Oct/2022:17:28:47 +0200] [Client 20] CGI data ready to be sent.
D [10/Oct/2022:17:28:47 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:47 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:47 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:47 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:47 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:47 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:47 +0200] [Client 20] CGI data ready to be sent.
D [10/Oct/2022:17:28:47 +0200] PID 5070 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [10/Oct/2022:17:28:47 +0200] [Client 20] con->http=0x5574db154910
D [10/Oct/2022:17:28:47 +0200] [Client 20] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5070, file=19
D [10/Oct/2022:17:28:47 +0200] [Client 20] Waiting for CGI data.
D [10/Oct/2022:17:28:47 +0200] [Client 20] Sending 0-length chunk.
D [10/Oct/2022:17:28:47 +0200] [Client 20] Flushing write buffer.
D [10/Oct/2022:17:28:47 +0200] [Client 20] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:28:47 +0200] [Client 20] Waiting for request.
D [10/Oct/2022:17:28:47 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:28:47 +0200] [Client 20] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:28:47 +0200] [Client 20] Closing connection.
D [10/Oct/2022:17:28:47 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [10/Oct/2022:17:28:48 +0200] Expiring subscriptions...
I [10/Oct/2022:17:35:08 +0200] Expiring subscriptions...
D [10/Oct/2022:17:35:08 +0200] cupsdAddCert: Adding certificate for PID 0
D [10/Oct/2022:17:35:08 +0200] Closing client 6 after 900 seconds of inactivity.
D [10/Oct/2022:17:35:08 +0200] [Client 6] Closing connection.
D [10/Oct/2022:17:35:08 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [10/Oct/2022:17:35:08 +0200] Report: clients=2
D [10/Oct/2022:17:35:08 +0200] Report: jobs=460
D [10/Oct/2022:17:35:08 +0200] Report: jobs-active=0
D [10/Oct/2022:17:35:08 +0200] Report: printers=2
D [10/Oct/2022:17:35:08 +0200] Report: stringpool-string-count=1379
D [10/Oct/2022:17:35:08 +0200] Report: stringpool-alloc-bytes=11536
D [10/Oct/2022:17:35:08 +0200] Report: stringpool-total-bytes=26952
I [10/Oct/2022:17:35:09 +0200] Expiring subscriptions...
D [10/Oct/2022:17:35:09 +0200] Closing client 5 after 900 seconds of inactivity.
D [10/Oct/2022:17:35:09 +0200] [Client 5] Closing connection.
D [10/Oct/2022:17:35:09 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [10/Oct/2022:17:36:48 +0200] Expiring subscriptions...
D [10/Oct/2022:17:36:48 +0200] Closing client 11 after 900 seconds of inactivity.
D [10/Oct/2022:17:36:48 +0200] [Client 11] Closing connection.
D [10/Oct/2022:17:36:48 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [10/Oct/2022:17:36:48 +0200] Report: clients=0
D [10/Oct/2022:17:36:48 +0200] Report: jobs=460
D [10/Oct/2022:17:36:48 +0200] Report: jobs-active=0
D [10/Oct/2022:17:36:48 +0200] Report: printers=2
D [10/Oct/2022:17:36:48 +0200] Report: stringpool-string-count=1379
D [10/Oct/2022:17:36:48 +0200] Report: stringpool-alloc-bytes=11536
D [10/Oct/2022:17:36:48 +0200] Report: stringpool-total-bytes=26952
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:38:24 +0200] [Client 21] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:38:24 +0200] [Client 21] Accepted from localhost (Domain)
D [10/Oct/2022:17:38:24 +0200] [Client 21] Waiting for request.
I [10/Oct/2022:17:38:24 +0200] Expiring subscriptions...
D [10/Oct/2022:17:38:24 +0200] Report: clients=1
D [10/Oct/2022:17:38:24 +0200] Report: jobs=460
D [10/Oct/2022:17:38:24 +0200] Report: jobs-active=0
D [10/Oct/2022:17:38:24 +0200] Report: printers=2
D [10/Oct/2022:17:38:24 +0200] Report: stringpool-string-count=1379
D [10/Oct/2022:17:38:24 +0200] Report: stringpool-alloc-bytes=11536
D [10/Oct/2022:17:38:24 +0200] Report: stringpool-total-bytes=26952
D [10/Oct/2022:17:38:24 +0200] [Client 21] POST / HTTP/1.1
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:17:38:24 +0200] [Client 21] Read: status=200, state=6
D [10/Oct/2022:17:38:24 +0200] [Client 21] No authentication data provided.
D [10/Oct/2022:17:38:24 +0200] [Client 21] 2.0 CUPS-Get-Default 1
D [10/Oct/2022:17:38:24 +0200] CUPS-Get-Default
D [10/Oct/2022:17:38:24 +0200] [Client 21] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.
D [10/Oct/2022:17:38:24 +0200] [Client 21] Content-Length: 10329
D [10/Oct/2022:17:38:24 +0200] [Client 21] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:38:24 +0200] [Client 21] con->http=0x5574db154910
D [10/Oct/2022:17:38:24 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=10329, response=0x5574db134a40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:38:24 +0200] [Client 21] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:38:24 +0200] [Client 21] bytes=0, http_state=0, data_remaining=10329
D [10/Oct/2022:17:38:24 +0200] [Client 21] Flushing write buffer.
D [10/Oct/2022:17:38:24 +0200] [Client 21] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:38:24 +0200] [Client 21] Waiting for request.
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:38:24 +0200] [Client 21] POST / HTTP/1.1
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:38:24 +0200] [Client 21] Read: status=200, state=6
D [10/Oct/2022:17:38:24 +0200] [Client 21] No authentication data provided.
D [10/Oct/2022:17:38:24 +0200] [Client 21] 2.0 CUPS-Get-Printers 2
D [10/Oct/2022:17:38:24 +0200] CUPS-Get-Printers
D [10/Oct/2022:17:38:24 +0200] [Client 21] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:17:38:24 +0200] [Client 21] Content-Length: 3004
D [10/Oct/2022:17:38:24 +0200] [Client 21] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:38:24 +0200] [Client 21] con->http=0x5574db154910
D [10/Oct/2022:17:38:24 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=3004, response=0x5574db14be70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:38:24 +0200] [Client 21] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:38:24 +0200] [Client 21] bytes=0, http_state=0, data_remaining=3004
D [10/Oct/2022:17:38:24 +0200] [Client 21] Flushing write buffer.
D [10/Oct/2022:17:38:24 +0200] [Client 21] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:38:24 +0200] [Client 21] Waiting for request.
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:38:24 +0200] [Client 22] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:38:24 +0200] [Client 22] Accepted from localhost (Domain)
D [10/Oct/2022:17:38:24 +0200] [Client 22] Waiting for request.
D [10/Oct/2022:17:38:24 +0200] [Client 22] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:38:24 +0200] [Client 22] Closing connection.
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:38:24 +0200] [Client 21] POST / HTTP/1.1
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:38:24 +0200] [Client 21] Read: status=200, state=6
D [10/Oct/2022:17:38:24 +0200] [Client 21] No authentication data provided.
D [10/Oct/2022:17:38:24 +0200] [Client 21] 2.0 CUPS-Get-Classes 3
D [10/Oct/2022:17:38:24 +0200] CUPS-Get-Classes
D [10/Oct/2022:17:38:24 +0200] [Client 21] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [10/Oct/2022:17:38:24 +0200] [Client 21] Content-Length: 75
D [10/Oct/2022:17:38:24 +0200] [Client 21] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:38:24 +0200] [Client 21] con->http=0x5574db154910
D [10/Oct/2022:17:38:24 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x5574db0ee380(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:38:24 +0200] [Client 21] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:38:24 +0200] [Client 21] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:17:38:24 +0200] [Client 21] Flushing write buffer.
D [10/Oct/2022:17:38:24 +0200] [Client 21] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:38:24 +0200] [Client 21] Waiting for request.
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:38:24 +0200] [Client 21] POST / HTTP/1.1
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:38:24 +0200] [Client 21] Read: status=200, state=6
D [10/Oct/2022:17:38:24 +0200] [Client 21] No authentication data provided.
D [10/Oct/2022:17:38:24 +0200] [Client 21] 2.0 CUPS-Get-Printers 4
D [10/Oct/2022:17:38:24 +0200] CUPS-Get-Printers
D [10/Oct/2022:17:38:24 +0200] [Client 21] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:17:38:24 +0200] [Client 21] Content-Length: 391
D [10/Oct/2022:17:38:24 +0200] [Client 21] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:38:24 +0200] [Client 21] con->http=0x5574db154910
D [10/Oct/2022:17:38:24 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=391, response=0x5574db153240(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:38:24 +0200] [Client 21] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:38:24 +0200] [Client 21] bytes=0, http_state=0, data_remaining=391
D [10/Oct/2022:17:38:24 +0200] [Client 21] Flushing write buffer.
D [10/Oct/2022:17:38:24 +0200] [Client 21] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:38:24 +0200] [Client 21] Waiting for request.
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:38:24 +0200] [Client 21] POST / HTTP/1.1
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:38:24 +0200] [Client 21] Read: status=200, state=6
D [10/Oct/2022:17:38:24 +0200] [Client 21] No authentication data provided.
D [10/Oct/2022:17:38:24 +0200] [Client 21] 2.0 CUPS-Get-Printers 5
D [10/Oct/2022:17:38:24 +0200] CUPS-Get-Printers
D [10/Oct/2022:17:38:24 +0200] [Client 21] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:17:38:24 +0200] [Client 21] Content-Length: 365
D [10/Oct/2022:17:38:24 +0200] [Client 21] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:38:24 +0200] [Client 21] con->http=0x5574db154910
D [10/Oct/2022:17:38:24 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=365, response=0x5574db13e4c0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:38:24 +0200] [Client 21] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:38:24 +0200] [Client 21] bytes=0, http_state=0, data_remaining=365
D [10/Oct/2022:17:38:24 +0200] [Client 21] Flushing write buffer.
D [10/Oct/2022:17:38:24 +0200] [Client 21] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:38:24 +0200] [Client 21] Waiting for request.
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:38:24 +0200] [Client 21] POST / HTTP/1.1
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:38:24 +0200] [Client 21] Read: status=200, state=6
D [10/Oct/2022:17:38:24 +0200] [Client 21] No authentication data provided.
D [10/Oct/2022:17:38:24 +0200] [Client 21] 2.0 CUPS-Get-Printers 6
D [10/Oct/2022:17:38:24 +0200] CUPS-Get-Printers
D [10/Oct/2022:17:38:24 +0200] [Client 21] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [10/Oct/2022:17:38:24 +0200] [Client 21] Content-Length: 820
D [10/Oct/2022:17:38:24 +0200] [Client 21] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:38:24 +0200] [Client 21] con->http=0x5574db154910
D [10/Oct/2022:17:38:24 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=820, response=0x5574db153240(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:38:24 +0200] [Client 21] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:38:24 +0200] [Client 21] bytes=0, http_state=0, data_remaining=820
D [10/Oct/2022:17:38:24 +0200] [Client 21] Flushing write buffer.
D [10/Oct/2022:17:38:24 +0200] [Client 21] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:38:24 +0200] [Client 21] Waiting for request.
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:38:24 +0200] [Client 21] POST / HTTP/1.1
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:38:24 +0200] [Client 21] Read: status=200, state=6
D [10/Oct/2022:17:38:24 +0200] [Client 21] No authentication data provided.
D [10/Oct/2022:17:38:24 +0200] [Client 21] 2.0 Get-Jobs 7
D [10/Oct/2022:17:38:24 +0200] Get-Jobs ipp://localhost/
D [10/Oct/2022:17:38:24 +0200] [Client 21] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost.
D [10/Oct/2022:17:38:24 +0200] [Client 21] Content-Length: 75
D [10/Oct/2022:17:38:24 +0200] [Client 21] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [10/Oct/2022:17:38:24 +0200] [Client 21] con->http=0x5574db154910
D [10/Oct/2022:17:38:24 +0200] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x5574db16ef70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [10/Oct/2022:17:38:24 +0200] [Client 21] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [10/Oct/2022:17:38:24 +0200] [Client 21] bytes=0, http_state=0, data_remaining=75
D [10/Oct/2022:17:38:24 +0200] [Client 21] Flushing write buffer.
D [10/Oct/2022:17:38:24 +0200] [Client 21] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:38:24 +0200] [Client 21] Waiting for request.
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:38:24 +0200] [Client 21] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:38:24 +0200] [Client 21] Closing connection.
D [10/Oct/2022:17:38:24 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [10/Oct/2022:17:38:25 +0200] Expiring subscriptions...
D [10/Oct/2022:17:40:00 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:40:00 +0200] [Client 23] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:40:00 +0200] [Client 23] Accepted from localhost (Domain)
D [10/Oct/2022:17:40:00 +0200] [Client 23] Waiting for request.
I [10/Oct/2022:17:40:00 +0200] Expiring subscriptions...
D [10/Oct/2022:17:40:00 +0200] Report: clients=1
D [10/Oct/2022:17:40:00 +0200] Report: jobs=460
D [10/Oct/2022:17:40:00 +0200] Report: jobs-active=0
D [10/Oct/2022:17:40:00 +0200] Report: printers=2
D [10/Oct/2022:17:40:00 +0200] Report: stringpool-string-count=1379
D [10/Oct/2022:17:40:00 +0200] Report: stringpool-alloc-bytes=11536
D [10/Oct/2022:17:40:00 +0200] Report: stringpool-total-bytes=26952
D [10/Oct/2022:17:40:00 +0200] [Client 23] POST / HTTP/1.1
D [10/Oct/2022:17:40:00 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:17:40:00 +0200] [Client 23] Read: status=200, state=6
D [10/Oct/2022:17:40:00 +0200] [Client 23] No authentication data provided.
D [10/Oct/2022:17:40:00 +0200] [Client 23] 2.0 CUPS-Get-Devices 1
D [10/Oct/2022:17:40:00 +0200] CUPS-Get-Devices
D [10/Oct/2022:17:40:00 +0200] cupsdIsAuthorized: username=""
D [10/Oct/2022:17:40:00 +0200] [Client 23] Returning HTTP Non autorisé for CUPS-Get-Devices (no URI) from localhost
D [10/Oct/2022:17:40:00 +0200] [Client 23] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [10/Oct/2022:17:40:00 +0200] [Client 23] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D [10/Oct/2022:17:40:00 +0200] [Client 23] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:40:00 +0200] [Client 23] Closing connection.
D [10/Oct/2022:17:40:00 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:40:00 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:40:00 +0200] [Client 24] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:40:00 +0200] [Client 24] Accepted from localhost (Domain)
D [10/Oct/2022:17:40:00 +0200] [Client 24] Waiting for request.
D [10/Oct/2022:17:40:00 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [10/Oct/2022:17:40:00 +0200] [Client 25] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:40:00 +0200] [Client 25] Accepted from localhost (Domain)
D [10/Oct/2022:17:40:00 +0200] [Client 25] Waiting for request.
D [10/Oct/2022:17:40:00 +0200] [Client 24] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:40:00 +0200] [Client 24] Closing connection.
D [10/Oct/2022:17:40:00 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:40:00 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:40:00 +0200] [Client 26] Server address is "/run/cups/cups.sock".
D [10/Oct/2022:17:40:00 +0200] [Client 26] Accepted from localhost (Domain)
D [10/Oct/2022:17:40:00 +0200] [Client 26] Waiting for request.
D [10/Oct/2022:17:40:00 +0200] [Client 25] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:40:00 +0200] [Client 25] Closing connection.
D [10/Oct/2022:17:40:00 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:40:00 +0200] [Client 26] POST / HTTP/1.1
D [10/Oct/2022:17:40:00 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [10/Oct/2022:17:40:00 +0200] [Client 26] Read: status=200, state=6
D [10/Oct/2022:17:40:00 +0200] [Client 26] Authorized as isaric using PeerCred.
D [10/Oct/2022:17:40:00 +0200] [Client 26] 2.0 CUPS-Get-Devices 1
D [10/Oct/2022:17:40:00 +0200] CUPS-Get-Devices
D [10/Oct/2022:17:40:00 +0200] cupsdIsAuthorized: username="isaric"
D [10/Oct/2022:17:40:00 +0200] [Client 26] AppArmor profile is 'unconfined'.
D [10/Oct/2022:17:40:00 +0200] [Client 26] Not a snap - allowed.
D [10/Oct/2022:17:40:00 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [10/Oct/2022:17:40:00 +0200] [CGI] argv[1] = "1"
D [10/Oct/2022:17:40:00 +0200] [CGI] argv[2] = "0"
D [10/Oct/2022:17:40:00 +0200] [CGI] argv[3] = "15"
D [10/Oct/2022:17:40:00 +0200] [CGI] argv[4] = "7"
D [10/Oct/2022:17:40:00 +0200] [CGI] argv[5] = "requested-attributes=all"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[3] = "CUPS_REQUESTROOT=/var/spool/cups"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[4] = "CUPS_SERVERBIN=/usr/lib/cups"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[5] = "CUPS_SERVERROOT=/etc/cups"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[6] = "CUPS_STATEDIR=/run/cups"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[7] = "HOME=/var/spool/cups/tmp"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[8] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[9] = "SERVER_ADMIN=root@isaric-p6-2007frm"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[10] = "SOFTWARE=CUPS/2.4.1"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[11] = "TMPDIR=/var/spool/cups/tmp"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[12] = "USER=root"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[13] = "CUPS_MAX_MESSAGE=2047"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[14] = "CUPS_SERVER=/run/cups/cups.sock"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[16] = "IPP_PORT=631"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[18] = "LANG=fr_FR.UTF8"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[22] = "SERVER_PORT=631"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[23] = "REMOTE_ADDR=localhost"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[25] = "SCRIPT_NAME=/"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[27] = "REMOTE_USER=isaric"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/2.4.1 (Linux 5.15.0-50-generic; x86_64) IPP/2.0"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[30] = "REQUEST_METHOD=POST"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[31] = "CONTENT_LENGTH=75"
D [10/Oct/2022:17:40:00 +0200] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D [10/Oct/2022:17:40:00 +0200] cupsdAddCert: Adding certificate for PID 5713
D [10/Oct/2022:17:40:00 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 5713)
I [10/Oct/2022:17:40:00 +0200] [Client 26] Started "/usr/lib/cups/daemon/cups-deviced" (pid=5713, file=16)
D [10/Oct/2022:17:40:00 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/bluetooth (PID 5714)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/snmp (PID 5715)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipp (PID 5716)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/hpfax (PID 5717)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/cups-brf (PID 5718)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/driverless-fax (PID 5719)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/driverless (PID 5720)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 5721)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/beh (PID 5722)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/hp (PID 5723)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/parallel (PID 5724)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/implicitclass (PID 5725)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/socket (PID 5726)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/dnssd (PID 5727)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/http (PID 5728)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/lpd (PID 5729)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 5730)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/https (PID 5731)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 5732)
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 5733)
D [10/Oct/2022:17:40:00 +0200] [Client 26] CGI data ready to be sent.
D [10/Oct/2022:17:40:00 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Found device \"cups-brf:/\"...
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] PID 5714 (bluetooth) exited with no errors.
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] PID 5718 (cups-brf) exited with no errors.
D [10/Oct/2022:17:40:00 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:00 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:00 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:00 +0200] [Client 26] Script header: Content-Type: application/ipp
D [10/Oct/2022:17:40:00 +0200] [Client 26] Script header: 
D [10/Oct/2022:17:40:00 +0200] [Client 26] Sending status 200 for CGI.
D [10/Oct/2022:17:40:00 +0200] [Client 26] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [10/Oct/2022:17:40:00 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:00 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:00 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] PID 5724 (parallel) exited with no errors.
D [10/Oct/2022:17:40:00 +0200] [Client 26] CGI data ready to be sent.
D [10/Oct/2022:17:40:00 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Found device \"beh\"...
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] PID 5722 (beh) exited with no errors.
D [10/Oct/2022:17:40:00 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:00 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:00 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:00 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:00 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:00 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:00 +0200] [CGI] Loading USB quirks from \"/usr/share/cups/usb\".
D [10/Oct/2022:17:40:00 +0200] [CGI] Loaded 118 quirks.
D [10/Oct/2022:17:40:00 +0200] [CGI] list_devices
D [10/Oct/2022:17:40:00 +0200] [Client 26] CGI data ready to be sent.
D [10/Oct/2022:17:40:00 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Found device \"ipp\"...
D [10/Oct/2022:17:40:00 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:00 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:00 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:00 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:00 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:00 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] PID 5716 (ipp) exited with no errors.
D [10/Oct/2022:17:40:00 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] Found device \"hp\"...
D [10/Oct/2022:17:40:00 +0200] [Client 26] CGI data ready to be sent.
D [10/Oct/2022:17:40:00 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:00 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:00 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:00 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:00 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:00 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:00 +0200] [CGI] libusb_get_device_list=9
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] PID 5723 (hp) exited with no errors.
D [10/Oct/2022:17:40:00 +0200] [cups-deviced] PID 5719 (driverless-fax) exited with no errors.
D [10/Oct/2022:17:40:01 +0200] [Client 26] CGI data ready to be sent.
D [10/Oct/2022:17:40:01 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] Found device \"https\"...
D [10/Oct/2022:17:40:01 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:01 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:01 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:01 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:01 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:01 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:01 +0200] [CGI] Started ippfind (PID 5738)
I [10/Oct/2022:17:40:01 +0200] Expiring subscriptions...
D [10/Oct/2022:17:40:01 +0200] [Client 26] CGI data ready to be sent.
D [10/Oct/2022:17:40:01 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] Found device \"socket\"...
D [10/Oct/2022:17:40:01 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:01 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:01 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:01 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:01 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:01 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] PID 5731 (https) exited with no errors.
D [10/Oct/2022:17:40:01 +0200] [Client 26] CGI data ready to be sent.
D [10/Oct/2022:17:40:01 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] Found device \"http\"...
D [10/Oct/2022:17:40:01 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:01 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:01 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:01 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:01 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:01 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:01 +0200] [Client 26] CGI data ready to be sent.
D [10/Oct/2022:17:40:01 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] Found device \"usb://Brother/DCP-L2500D%20series?serial=E73908D7N915582\"...
D [10/Oct/2022:17:40:01 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:01 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:01 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:01 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:01 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:01 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] PID 5726 (socket) exited with no errors.
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] PID 5725 (implicitclass) exited with no errors.
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] PID 5728 (http) exited with no errors.
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] PID 5730 (usb) exited with no errors.
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] PID 5733 (mdns) exited with no errors.
D [10/Oct/2022:17:40:01 +0200] [Client 26] CGI data ready to be sent.
D [10/Oct/2022:17:40:01 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] Found device \"ipps\"...
D [10/Oct/2022:17:40:01 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:01 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:01 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:01 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:01 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:01 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:01 +0200] [Client 26] CGI data ready to be sent.
D [10/Oct/2022:17:40:01 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] Found device \"lpd\"...
D [10/Oct/2022:17:40:01 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:01 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:01 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:01 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:01 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:01 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] PID 5721 (ipps) exited with no errors.
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] PID 5729 (lpd) exited with no errors.
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] PID 5732 (serial) exited with no errors.
D [10/Oct/2022:17:40:01 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:40:01 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:40:01 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:40:01 +0200] [Client 26] CGI data ready to be sent.
D [10/Oct/2022:17:40:01 +0200] [CGI] Flushed attributes...
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] Found device \"hpfax\"...
D [10/Oct/2022:17:40:01 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:01 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:01 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:01 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:01 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:01 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:01 +0200] [cups-deviced] PID 5717 (hpfax) exited with no errors.
D [10/Oct/2022:17:40:01 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:40:01 +0200] [CGI] sent=0, count=0
D [10/Oct/2022:17:40:02 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:40:02 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:40:02 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:40:02 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
D [10/Oct/2022:17:40:02 +0200] [CGI] Ignoring local service DCPL2500D @ isaric-p6-2007frm.
I [10/Oct/2022:17:40:02 +0200] Expiring subscriptions...
D [10/Oct/2022:17:40:02 +0200] [CGI] sent=0, count=0
D [10/Oct/2022:17:40:02 +0200] [cups-deviced] PID 5715 (snmp) exited with no errors.
D [10/Oct/2022:17:40:03 +0200] [CGI] sent=0, count=0
I [10/Oct/2022:17:40:03 +0200] Expiring subscriptions...
D [10/Oct/2022:17:40:03 +0200] [cups-deviced] PID 5727 (dnssd) exited with no errors.
D [10/Oct/2022:17:40:03 +0200] [CGI] ippfind (PID 5738) exited with no errors.
D [10/Oct/2022:17:40:03 +0200] [cups-deviced] PID 5720 (driverless) exited with no errors.
D [10/Oct/2022:17:40:03 +0200] [Client 26] CGI data ready to be sent.
D [10/Oct/2022:17:40:03 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:03 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:03 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:03 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:03 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:03 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:03 +0200] [Client 26] CGI data ready to be sent.
D [10/Oct/2022:17:40:03 +0200] PID 5713 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [10/Oct/2022:17:40:03 +0200] [Client 26] con->http=0x5574db154910
D [10/Oct/2022:17:40:03 +0200] [Client 26] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=5713, file=16
D [10/Oct/2022:17:40:03 +0200] [Client 26] Waiting for CGI data.
D [10/Oct/2022:17:40:03 +0200] [Client 26] Sending 0-length chunk.
D [10/Oct/2022:17:40:03 +0200] [Client 26] Flushing write buffer.
D [10/Oct/2022:17:40:03 +0200] [Client 26] New state is HTTP_STATE_WAITING
D [10/Oct/2022:17:40:03 +0200] [Client 26] Waiting for request.
D [10/Oct/2022:17:40:03 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [10/Oct/2022:17:40:03 +0200] [Client 26] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [10/Oct/2022:17:40:03 +0200] [Client 26] Closing connection.
D [10/Oct/2022:17:40:03 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [10/Oct/2022:17:40:04 +0200] Expiring subscriptions...
:~$
:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                        Version                                    Architecture Description
+++-==========================================-==========================================-============-================================================================================
rc  linux-image-5.15.0-27-generic              5.15.0-27.28                               amd64        Signed kernel image generic
rc  linux-image-5.15.0-30-generic              5.15.0-30.31                               amd64        Signed kernel image generic
rc  linux-image-5.15.0-33-generic              5.15.0-33.34                               amd64        Signed kernel image generic
rc  linux-image-5.15.0-37-generic              5.15.0-37.39                               amd64        Signed kernel image generic
rc  linux-image-5.15.0-39-generic              5.15.0-39.42                               amd64        Signed kernel image generic
rc  linux-image-5.15.0-40-generic              5.15.0-40.43                               amd64        Signed kernel image generic
rc  linux-image-5.15.0-41-generic              5.15.0-41.44                               amd64        Signed kernel image generic
rc  linux-image-5.15.0-43-generic              5.15.0-43.46                               amd64        Signed kernel image generic
rc  linux-image-5.15.0-46-generic              5.15.0-46.49                               amd64        Signed kernel image generic
rc  linux-image-5.15.0-47-generic              5.15.0-47.51                               amd64        Signed kernel image generic
rc  linux-modules-5.15.0-27-generic            5.15.0-27.28                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-5.15.0-30-generic            5.15.0-30.31                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-5.15.0-33-generic            5.15.0-33.34                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-5.15.0-37-generic            5.15.0-37.39                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-5.15.0-39-generic            5.15.0-39.42                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-5.15.0-40-generic            5.15.0-40.43                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-5.15.0-41-generic            5.15.0-41.44                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-5.15.0-43-generic            5.15.0-43.46                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-5.15.0-46-generic            5.15.0-46.49                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-5.15.0-47-generic            5.15.0-47.51                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.15.0-27-generic      5.15.0-27.28                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.15.0-30-generic      5.15.0-30.31                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.15.0-33-generic      5.15.0-33.34                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.15.0-37-generic      5.15.0-37.39                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.15.0-39-generic      5.15.0-39.42                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.15.0-40-generic      5.15.0-40.43                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.15.0-41-generic      5.15.0-41.44                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.15.0-43-generic      5.15.0-43.46                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.15.0-46-generic      5.15.0-46.49                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.15.0-47-generic      5.15.0-47.51                               amd64        Linux kernel extra modules for version 5.15.0 on 64 bit x86 SMP
rc  mysql-common                               5.8+1.0.5ubuntu2                           all          MySQL database common files, e.g. /etc/mysql/my.cnf
:~$ 

Faut-il refaire la même chose du côté de l'ordinateur B ?


"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

Hors ligne

#5 Le 10/10/2022, à 17:42

xubu1957

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

Pour purger les résidus de configuration marqués "rc" :

sudo apt purge ~c

comme expliqué à la machine à café.

Tente :

sudo service cups restart

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#6 Le 10/10/2022, à 17:53

Isaric

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

Merci
J'ai fait sur l'ordinateur A

sudo apt purge ~c

puis

sudo service cups restart

J'ai lancé une impression à partir de l'ordi B
et je vois la tâche en attente sur ordi B sad

édit : l'imprimante sur A est bien allumée

Dernière modification par Isaric (Le 10/10/2022, à 17:54)


"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

Hors ligne

#7 Le 10/10/2022, à 18:04

xubu1957

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#8 Le 10/10/2022, à 19:15

Isaric

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

Merci xubu1957

Depuis début 2021 cups marchait très bien tout seul (j'avais même abandonnée l'installation :  [abandon] Samba, mot de passe...et imprimante).

Après ? Mise à jour ou bidouille depuis quelques semaines cela ne marche plus ! roll


"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

Hors ligne

#9 Le 10/10/2022, à 19:33

xubu1957

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

system default destination: DCPL2500D
matériel pour Brother_MFC_J5730DW : implicitclass://Brother_MFC_J5730DW/
matériel pour DCPL2500D : usb://Brother/DCP-L2500D%20series?serial=E73908D7N915582
Brother_MFC_J5730DW accepte des requêtes depuis dim. 14 août 2022 00:00:02
DCPL2500D accepte des requêtes depuis mer. 05 oct. 2022 14:54:44
printer Brother_MFC_J5730DW disabled since dim. 14 août 2022 00:00:02 -
	Printer disappeared or cups-browsed shutdown
printer DCPL2500D is idle.  enabled since mer. 05 oct. 2022 14:54:44

Tu as deux imprimantes ?

Je regardais une réponse d'eric63.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#10 Le 10/10/2022, à 20:04

Isaric

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

Je n'ai qu'une de connectée l'autre je l'ai utilisée occasionnellement (je ne l'utilise plus pour l'instant)
La seule qui est connectée c'est :

xubu1957 a écrit :

DCPL2500D

Dernière modification par Isaric (Le 10/10/2022, à 20:04)


"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

Hors ligne

#11 Le 10/10/2022, à 20:14

eric63

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

Salut
donne le retour de

cat /etc/sane.d/dll.conf

le brother4 en fin de liste n’est pas forcément nécessaire si les pilotes sont basés sur le noyau (ce qui fait qu’il n’y a pas lieu d’installer quoi que ce soit ça fonctionne in the box)
J’ai réinstaller mon système et mon home en repartant de zéro et mon imprimante est reconnu à 100%
le hic c’est que le pilote du noyau est plus ou moins fiable donc passer par un des script n’est pas forcément une mauvaise idée encore suivant l’imprimante

et est ce que tu as démarrer le script de brother ou de demonipuch ? (voir mon profil)

Dernière modification par eric63 (Le 10/10/2022, à 20:25)


Kubuntu 23.10 - WAYLAND- 64 bits + backports bêta = plasma 5.27.10 KDE 5.112.0 Qt 5.15.10 et noyau 6.5.0-17  4x intel i5-4570 3.2Ghz 12Go nvidia GTX 1060 6GB 3écrans
Comment installer une brother avec le script de demonipuch

J’utilise le clavier french AFNOR de chez LDLC c‘est fort

Hors ligne

#12 Le 10/10/2022, à 20:21

Isaric

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

À la page

http://localhost:631/printers/?

J'ai les deux imprimantes en pause, je vais changer celle qui est connectée et tester !


"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

Hors ligne

#13 Le 10/10/2022, à 20:35

Isaric

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

Merci eric63

:~$ cat /etc/sane.d/dll.conf
# dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under the dll.d/
# directory -- third party backends can drop their configuration file in
# this in this directory, named after the backend.
#
# The next line enables the network backend; comment it out if you don't
# need to use a remote SANE scanner over the network -- see sane-net(5)
# and saned(8) for details.
net
abaton
agfafocus
apple
artec
artec_eplus48u
as6e
avision
bh
canon
canon630u
canon_dr
canon_lide70
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc210
#dc240
#dc25
dell1600n_net
dmc
epjitsu
#epson
epson2
epsonds
escl
fujitsu
genesys
#gphoto2
gt68xx
hp
hp3500
hp3900
hp4200
hp5400
hp5590
hpljm1005
hpsj5s
hs2p
ibm
kodak
kodakaio
kvs1025
kvs20xx
kvs40xx
leo
lexmark
ma1509
magicolor
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
#p5
pie
pieusb
pint
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
ricoh2
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
umax1220u
#umax_pp
v4l
xerox_mfp



brother4
:~$ 

"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

Hors ligne

#14 Le 10/10/2022, à 21:15

eric63

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

Mon imprimante est connecté sur un ordinateur A et imprime bien.
Je souhaite imprimer à partir d'un ordinateur B (branché sur la même box).
Sur ordi B je vois bien l'imprimante de l'ordi A, mais je ne peux plus imprimer.

pour éclaircir mes idées
ton imprimante est connecté en usb sur A
B voit l’imprimante en reseau  ? ou wifi ? mais n’imprime rien

si c’est ca je referais le script de demonipuch depuis B et ajouterais une imprimante en réseau depuis la configuration du système de B
nommer l’emplacement de l’imprimante clairement (par ex: imprimante WIFI ou Reseau )

Dernière modification par eric63 (Le 10/10/2022, à 21:16)


Kubuntu 23.10 - WAYLAND- 64 bits + backports bêta = plasma 5.27.10 KDE 5.112.0 Qt 5.15.10 et noyau 6.5.0-17  4x intel i5-4570 3.2Ghz 12Go nvidia GTX 1060 6GB 3écrans
Comment installer une brother avec le script de demonipuch

J’utilise le clavier french AFNOR de chez LDLC c‘est fort

Hors ligne

#15 Le 11/10/2022, à 08:26

Isaric

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

Merci @eric63, tu as bien compris !

Box  avec 2 ordis :
- ordi A en RJ45 (l'ordi A a l'imprimante Brother DCP-L2500 câblée en USB)
- ordi B en Wifi

Par contre je ne savais pas quoi répondre à ta question :
" B voit l’imprimante en réseau  ? ou wifi ? "

J'ai lancé demonipuch
et là je bloque aux questions me demandant si l'imprimante est câblé en réseau ou USB aussi on me demande de connaître absolument l'adresse IP Fixe.
Chose que je ne connais pas ?


J'ai voulu réinstaller l'imprimante pour voir si je trouve ces informations et maintenant je vois ces 2 imprimantes (avant il n'y en avait qu'une) :
instal IMP
Je l'ajoute et là je peux imprimer smile mais je n'ai rien compris roll pourquoi elles n'étaient pas vus ainsi avant ?

Est-ce le passage de l'état de pause à l'état inoccupé à la page :
http://localhost:631/printers/?


"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

Hors ligne

#16 Le 11/10/2022, à 16:39

eric63

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

l’adresse IP de ton imprimante est obligatoire pour joindre ton imprimante (visible dans les réglages de celle ci)
le fait qu’elle soit en IP fixe ou statique est un plus pour verrouiller la recherche de l’IP afin qu’elle soit sûr car cette adresse peut être «volé» par un autre appareil s’il est reconnu avant et devenir inaccessible depuis ton ordi B
IP dynamique premier vu premier servi
les réglages se font depuis ta box rubrique dhcp ou réseau (mettre même ip sur box que sur imprimante)

Dernière modification par eric63 (Le 11/10/2022, à 16:40)


Kubuntu 23.10 - WAYLAND- 64 bits + backports bêta = plasma 5.27.10 KDE 5.112.0 Qt 5.15.10 et noyau 6.5.0-17  4x intel i5-4570 3.2Ghz 12Go nvidia GTX 1060 6GB 3écrans
Comment installer une brother avec le script de demonipuch

J’utilise le clavier french AFNOR de chez LDLC c‘est fort

Hors ligne

#17 Le 12/10/2022, à 12:19

Isaric

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

Merci eric63

Dans mon cas l'imprimante est-elle en réseau puisqu'elle est sur une prise USB de l'ordinateur A et non de la box ?
Si elle est considéré dans ce cas en réseau cela veut-il dire qu'on utiliserai l'adresse IP de l'ordinateur A ?


"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

Hors ligne

#18 Le 12/10/2022, à 13:41

eric63

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

ton imprimante est sur relié en usb sur l’ordi A
mais elle est aussi en wifi sur A et sur B
il faut juste avoir les pilotes pour effectuer la connexion de A ou de B vers ton imprimante
le «réseau» peut être en wifi (onde) et ? ou en ethernet (cable)
Je ne sais pas si c’est possible d’avoir les trois pour A (usb, wifi, ethernet)


Kubuntu 23.10 - WAYLAND- 64 bits + backports bêta = plasma 5.27.10 KDE 5.112.0 Qt 5.15.10 et noyau 6.5.0-17  4x intel i5-4570 3.2Ghz 12Go nvidia GTX 1060 6GB 3écrans
Comment installer une brother avec le script de demonipuch

J’utilise le clavier french AFNOR de chez LDLC c‘est fort

Hors ligne

#19 Le 12/10/2022, à 15:37

Isaric

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

eric63 a écrit :

ton imprimante est sur relié en usb sur l’ordi A
mais elle est aussi en wifi sur A et sur B
il faut juste avoir les pilotes pour effectuer la connexion de A ou de B vers ton imprimante
le «réseau» peut être en wifi (onde) et ? ou en ethernet (cable)
Je ne sais pas si c’est possible d’avoir les trois pour A (usb, wifi, ethernet)

Le branchement :
ordi A (a une imprimante connectée en USB, cette imprimante n'a pas de wifi et l'ordinateur A non plus), il est relié à la box en RJ45...
ordi B est relié au wifi de la box (il n'y a pas de liaison directe avec l'imprimante qui n'a pas de wifi DCP-L2500D

L'impression avec CUPS marche maintenant de nouveau (il faut juste que ordi A soit "lancé" sans ouverture de session et l'imprimante allumée).
Petite remarque : en raccordant l'imprimante directement sur la bbox de souvenir le scanner n'est pas utilisable.

Dernière modification par Isaric (Le 28/02/2023, à 16:30)


"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

Hors ligne

#20 Le 13/10/2022, à 11:21

eric63

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

Petite remarque : en raccordant l'imprimante directement sur la bbox de souvenir le scanner n'est pas utilisable.

ça c’est quasi normal: la plupart des box «grandes marques» ont un serveur d’impression mais pas de serveur de scanner, branchement en usb sur la box.

Donc ton imprimante est en usb sur A qui est en ethernet sur ta box et en wifi sur B
donc ton imprimante n‘est pas vraiment en réseau direct il faut que A soit allumé

je ne connaissais pas ce fonctionnement donc je ne suis pas sur que depuis B les scripts fournit par brother ou demonipuch fonctionnent
à essayer avec A allumé et démarrage du script demonipuch sur B
choix réseau mais quel IP mettre ??? celui de A à priori (donc IP fixe sinon ce sera vite le bazar)
pour que la liaison usb A vers imprimante soit reconnue
est ce que tu as un réglage due partage imprimante depuis A?


Kubuntu 23.10 - WAYLAND- 64 bits + backports bêta = plasma 5.27.10 KDE 5.112.0 Qt 5.15.10 et noyau 6.5.0-17  4x intel i5-4570 3.2Ghz 12Go nvidia GTX 1060 6GB 3écrans
Comment installer une brother avec le script de demonipuch

J’utilise le clavier french AFNOR de chez LDLC c‘est fort

Hors ligne

#21 Le 13/10/2022, à 15:54

Isaric

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

Désolé @eric63, Je n'ai pas été plus loin avec le script demonipuch.
J'avoue que CUPS m'a semblé le plus simple à mettre en place dans mon cas et à ce jour cela marche... smile
(cela marchait bien jusqu'à que je connecte une autre imprimante, mais cela semble rentrer dans l'ordre, peut-être jusqqu'à ce que je connecte une autre imprimante ... à suivre....).


"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

Hors ligne

#22 Le 13/10/2022, à 16:28

iznobe

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

Merci eric63

Dans mon cas l'imprimante est-elle en réseau puisqu'elle est sur une prise USB de l'ordinateur A et non de la box ?

Bonjour , une imprimante en reseau , cela signifie que l' imprimante est acessible via une adrese ip sur le reseau local .
Cela implique donc au minimum , que l' imprimante dispose soit d ' un port RJ45 , soit d' un module wifi .
en wifi il faut soit utiliser le WPS , soit entrer la clé wifi manuellement .

Votre discussion me parait assez louche a propos de A et B et j' avous que je n' ai pas tout suivi .

le fait qu ' elle soit connectée a un ordi par USB , n' empeche pas le module wifi ou le port Rj45 de se connecter au reseau local .

Si elle est considéré dans ce cas en réseau cela veut-il dire qu'on utiliserai l'adresse IP de l'ordinateur A ?

bien sur que non , si l' imprimante est connectée au reseau local , elle a sa propre IP et carte reseau ( wifi ou filaire ) comme dis précédemment .

Dernière modification par iznobe (Le 13/10/2022, à 16:30)


retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .

Hors ligne

#23 Le 13/10/2022, à 19:31

Isaric

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

iznobe voici le raccordement :
ordi A et B


"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

Hors ligne

#24 Le 13/10/2022, à 19:42

iznobe

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

ok , si le reseau local est constitué des ces 3 peripheriques uniquement , pour verifier si l' imprimante est en reseau , c' est relativement simple .
avec

ip a

on recupere un adresse ip celle de l' ordinateur, qui permet d' en deduire le masque reseau local ( par exemple ip 19.2.168.1.12 ) le masque reseau est alors 192.168.1.0/24
tu installes nmap :

sudo apt install nmap 

puis tu fais un scan reseau ( cette commande permet de scanner les 225 ip disponibles dan le masque de 0 a 254) :

nmap -sn 192.168.1.* 

si tu trouves 3 adresses ip en plus de celle de la box  generalement une live box dans ce masque de reseau , elle aura alors pour ip par defaut 192.168.1.1 , c' est que ton imprimante est en reseau , et en plus tu connaitras son ip , si tu fais un

ip a

sur l' ordi A et B par simple deduction  .

une imprimante ne peut pas " etre considerée " en reseau soit elle l' est soit pas .
elle peut aussi etre partagée via le reseau , par exemple avec samba , mais elle n' est pas en reseau dans ce cas .
là , tu envoies la requete au serveur samba situé sur un ordi qui envoie l' impression a l' imprimante .  Dans ce cas l ' imprimante n' est pas en reseau et ne dispose pas d' IP propre .
c' est le serveur samba qui fait la liaison reseau , mais c ' est tou de meme fondamentalement different , meme si a l' usage cela se ressemble fortement d ' un point de vue utilisateur .
Seul soucis dans ce cas , si l' ordinateur n ' est pas en marche , le serveur samba n ' est plus present et l' imprimante pas partagée , contrairement a une " vraie " imprimante en reseau , qui elle , est autonome puisque , justement , accessible via son IP .

Dernière modification par iznobe (Le 13/10/2022, à 19:51)


retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .

Hors ligne

#25 Le 14/10/2022, à 07:43

Isaric

Re : Imprimante en USB + "réseau" et CUPS (sur Brother)

Merci iznobe pour

ip a

j'en étais toujours avec ifconfig roll

isaric@isaric-p6-2007frm:~$ nmap -sn 192.168.1.* 
Starting Nmap 7.80 ( https://nmap.org ) at 2022-10-14 08:39 CEST
Nmap scan report for ric-Galaxy-A6.lan (192.168.1.19)
Host is up (0.073s latency).
Nmap scan report for Isa-Galaxy-A6.lan (192.168.1.25)
Host is up (0.089s latency).
Nmap scan report for isaric-Latitude-E5530-non-vPro-001.lan (192.168.1.65)
Host is up (0.0093s latency).
Nmap scan report for isaric-p6-2007frm.lan (192.168.1.93)
Host is up (0.000075s latency).
Nmap scan report for bbox.lan (192.168.1.254)
Host is up (0.0018s latency).
Nmap done: 256 IP addresses (5 hosts up) scanned in 8.30 seconds

[édit]
Ordi A isaric-p6-2007frm.lan (192.168.1.93)
Ordi B isaric-Latitude-E5530-non-vPro-001.lan (192.168.1.65)

Dernière modification par Isaric (Le 14/10/2022, à 07:59)


"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

Hors ligne