Ubuntu-fr

zerozero

[Résolu] Plus d'accès à https://localhost/phpmyadmin/

Bonsoir,
Je n'ai plus accès à ma page https://localhost/phpmyadmin/ depuis la mise à jour LTS 22.04.1 il semble.
J'ai parcouru un peu les forums et discussion et j'ai exécuté quelques commandes pour essayer de comprendre.
J'avais installé LAMP et il semble que j'ai une erreur en lançant la commande suivante :

systemctl status apache2

résultat :

root@acer:/home/co# systemctl status apache2
× apache2.service - The Apache HTTP Server
     Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset: enabled)
     Active: failed (Result: exit-code) since Fri 2022-08-26 18:19:28 CEST; 1h 47min ago
       Docs: https://httpd.apache.org/docs/2.4/
        CPU: 22ms

août 26 18:19:28 acer systemd[1]: Starting The Apache HTTP Server...
août 26 18:19:28 acer apachectl[845]: apache2: Syntax error on line 146 of /etc/apache2/apache2.conf: Syntax error >
août 26 18:19:28 acer apachectl[795]: Action 'start' failed.
août 26 18:19:28 acer apachectl[795]: The Apache error log may have more information.
août 26 18:19:28 acer systemd[1]: apache2.service: Control process exited, code=exited, status=1/FAILURE
août 26 18:19:28 acer systemd[1]: apache2.service: Failed with result 'exit-code'.
août 26 18:19:28 acer systemd[1]: Failed to start The Apache HTTP Server.

Si vous avez une petite idée pour m'aider ? Merci !

Dernière modification par zerozero (Le 27/08/2022, à 19:35)

iznobe

Re : [Résolu] Plus d'accès à https://localhost/phpmyadmin/

Bonjour , je ne suis pas expert en serveur etc , mais vu :

août 26 18:19:28 acer apachectl[845]: apache2: Syntax error on line 146 of /etc/apache2/apache2.conf: Syntax error >

tu devrais donner deja :

cat /etc/apache2/apache2.conf

a priori , ca viendrait plutot d' une modification de fichier plutot que de la mise a niveau , et regarder la ligne 146 , et la mettre en evidence juste apres le cat .

Dernière modification par iznobe (Le 26/08/2022, à 20:20)

---

retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .

zerozero

Re : [Résolu] Plus d'accès à https://localhost/phpmyadmin/

Merci !
Voilà ce que donne la commande :

root@acer:/home/co# cat /etc/apache2/apache2.conf
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.4/ for detailed information about
# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
# hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.

# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
#	/etc/apache2/
#	|-- apache2.conf
#	|	`--  ports.conf
#	|-- mods-enabled
#	|	|-- *.load
#	|	`-- *.conf
#	|-- conf-enabled
#	|	`-- *.conf
# 	`-- sites-enabled
#	 	`-- *.conf
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
#   together by including all remaining configuration files when starting up the
#   web server.
#
# * ports.conf is always included from the main configuration file. It is
#   supposed to determine listening ports for incoming connections which can be
#   customized anytime.
#
# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
#   directories contain particular configuration snippets which manage modules,
#   global configuration fragments, or virtual host configurations,
#   respectively.
#
#   They are activated by symlinking available configuration files from their
#   respective *-available/ counterparts. These should be managed by using our
#   helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
#   their respective man pages for detailed information.
#
# * The binary is called apache2. Due to the use of environment variables, in
#   the default configuration, apache2 needs to be started/stopped with
#   /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
#   work with the default configuration.


# Global configuration
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the Mutex documentation (available
# at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
#ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
#Mutex file:${APACHE_LOCK_DIR} default

#
# The directory where shm and other runtime files will be stored.
#

DefaultRuntimeDir ${APACHE_RUN_DIR}

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5


# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log

#
# LogLevel: Control the severity of messages logged to the error_log.
# Available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the log level for particular modules, e.g.
# "LogLevel info ssl:warn"
#
LogLevel warn

# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf

# Include list of ports to listen on
Include ports.conf


# Sets the default security model of the Apache2 HTTPD server. It does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# The former is used by web applications packaged in Debian,
# the latter may be used for local directories served by the web server. If
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.
<Directory />
	Options FollowSymLinks
	AllowOverride None
	Require all denied
</Directory>

<Directory /usr/share>
	AllowOverride None
	Require all granted
</Directory>

<Directory /var/www/>
	Options Indexes FollowSymLinks
	AllowOverride None
	Require all granted
</Directory>

#<Directory /srv/>
#	Options Indexes FollowSymLinks
#	AllowOverride None
#	Require all granted
#</Directory>




# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
	Require all denied
</FilesMatch>


#
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# These deviate from the Common Log Format definitions in that they use %O
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
# Use mod_remoteip instead.
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.

# Include generic snippets of statements
IncludeOptional conf-enabled/*.conf

# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
root@acer:/home/co# 

La ligne 146 étant celle là :

IncludeOptional mods-enabled/*.load

Une idée ?

iznobe

Re : [Résolu] Plus d'accès à https://localhost/phpmyadmin/

il faut attendre @bruno , c' est le specialiste des serveurs

---

retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .

bruno

Re : [Résolu] Plus d'accès à https://localhost/phpmyadmin/

Bonjour,

Il faut examiner le retour de :

apache2ctl -t

pour vérifier la syntaxe des fichiers de configuration et obtenir emplacement exact de l'erreur.

zerozero

Re : [Résolu] Plus d'accès à https://localhost/phpmyadmin/

Bonjour ! et merci !
Voilà ce que donne le résultat :

co@acer:~$ apache2ctl -t
apache2: Syntax error on line 146 of /etc/apache2/apache2.conf: Syntax error on line 3 of /etc/apache2/mods-enabled/php7.4.load: Cannot load /usr/lib/apache2/modules/libphp7.4.so into server: /usr/lib/apache2/modules/libphp7.4.so: cannot open shared object file: No such file or directory
Action '-t' failed.
The Apache error log may have more information.

Le fichier php7.4.load n'ayant que 3 lignes :

# Conflicts: php5
# Depends: mpm_prefork
LoadModule php7_module /usr/lib/apache2/modules/libphp7.4.so

Une idée ?

[EDIT] Je n'ai pas de fichier libphp7.4.so dans /usr/lib/apache2/modules/libphp7.4.so mais un fichier /usr/lib/apache2/modules/libphp8.1.so

Dernière modification par zerozero (Le 27/08/2022, à 10:09)

bruno

Re : [Résolu] Plus d'accès à https://localhost/phpmyadmin/

Il faut faire ceci :

sudo a2enmod php8.1
sudo a2dismod php7.4

sudo systemctl restart apache2

zerozero

Re : [Résolu] Plus d'accès à https://localhost/phpmyadmin/

Parfait ! Merci !