Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#26 Le 14/05/2022, à 08:19

aucito

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Le fait que l'écran du smartphone soit déjà reverrouillé, ça ne pose pas de problème?

Hors ligne

#27 Le 14/05/2022, à 08:26

xubu1957

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

[   13.809386] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   14.197435] usbcore: registered new interface driver rtl88x2bu
[   14.265477] rtl88x2bu 2-1.4:1.0 wlx1cbfcec2fc21: renamed from wlan0

Ces retours au #23 concernent la carte et la clé Wi-Fi.

Je ne sais pas interpréter les autres retours.

_ _ _

Edit = messages regroupés
_ _ _

cat /var/log/messages

donne quoi ?

> mageialinux-online.org/forum/topic-11524-1+erreur-pour-monter-un-telephone-samsung-wave-2

Dernière modification par xubu1957 (Le 14/05/2022, à 19:06)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#28 Le 14/05/2022, à 09:29

aucito

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Voici 

aucito@W5au:~$ cat /var/log/messages
cat: /var/log/messages: Aucun fichier ou dossier de ce type
aucito@W5au:~$ sudo cat /var/log/messages
[sudo] Mot de passe de aucito : 
cat: /var/log/messages: Aucun fichier ou dossier de ce type
aucito@W5au:~$ 

Hors ligne

#29 Le 14/05/2022, à 09:33

xubu1957

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Je ne sais pas faire plus. ¯\_(ツ)_/¯


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#30 Le 14/05/2022, à 09:43

aucito

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Merci,
Mais selon vous, problème physique ou de configuration, au niveau pc ou du smartphone?

Hors ligne

#31 Le 14/05/2022, à 09:44

xubu1957

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Je n'en sais rien, je n'ai jamais voulu de smartphone !


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#32 Le 14/05/2022, à 09:50

FrancisFDZ

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

xubu1957 a écrit :

Je n'en sais rien, je n'ai jamais voulu de smartphone !

+1 !


-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]

Hors ligne

#33 Le 14/05/2022, à 09:59

aucito

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Oui, sage précaution.. 
Je n'en supportais pas les ondes, mais sans carte sim, ça en émet beaucoup moins selon moi.
Mas vous, c'est sans doute pour une autre raison.
Peut-être d'autres de l'équipe pourront voir s'ils ne peuvent pas m'aider à solutionner ou êtes-vous moins entouré que par le passé?
A bientôt.

Hors ligne

#34 Le 14/05/2022, à 13:20

aucito

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Bonjour,
Je me demande si ce n'est pas le ONE UI installé par mise à jour sur smartphone Samsung S8 (android 9), qui est responsable du problème de connexion entre les 2 appareils.
Sur mon Konrow Just5, il n'y a pas ce ONE UI..  et pas de problème non plus pour être reconnu par mon pc.
Mais comment désinstaller ce ONE UI et peut-être revenir à android 8?
Il y a bien Odin, mais d'abord ça fonctionne mieux avec windows.., mais aussi si connexion usb défaillante pour transferts, à partir du pc, je ne pourrai sans doute rien faire..
Merci d'avance si..
Cordialement.

Hors ligne

#35 Le 14/05/2022, à 14:35

xinu

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

As-tu vérifié via les codes de service, que le mode MTP est sélectionné pour l'USB ?

Point 4 de cette page : https://www.hardreset.info/fr/devices/s … les-codes/

Éventuellement vider le cache : https://www.hardreset.info/fr/devices/s … -le-cache/

a+

Dernière modification par xinu (Le 14/05/2022, à 14:57)


Asus PM8H61-MX USB3   Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz DDR3 8Go
Ubuntu 16.04 LTS - ESM 64 bits. Bureau Unity.     Ubuntu 20.04 LTS 64 bits . Gnome 3.36.8

Hors ligne

#36 Le 14/05/2022, à 15:32

aucito

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Bonjour xinu,
Tout-à-fait inconnue cette liste de codes secrets, pour moi. Merci pour cette information.
En fait j'ai parlé dans mon dernier post de S8 sans préciser plus. En réalité j'ai un S8+   dual sim   , donc G955FD , que je n'ai pas trouvé sur la liste,  j'ai donc fait avec les codes du G950F  (S8)  et taper sur les touches du téléphone  *#0808#  (sans carte SIM) et les paramètres usb sont apparus, était coché RNIS je pense mais pas MTP, que j'ai donc coché, en pensant bingo, c'est peut-être la solution, mais non..  Ensuite j'ai fait la manipulation pour effacer le cache de la partition, ça a marché comme indiqué dans le second lien que tu as fourni ci-dessus.  Mais après redémarrage, toujours chargement pas câble et quand je touche cette notificaion, on dit le temps restant pour charge complète. 
Ça avance un peu,,, , même si on n'y est pas encore.. Merci.

Hors ligne

#37 Le 14/05/2022, à 16:00

aucito

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Salut.
J'ai ensuite fait une réinitialision d'usine, et rien de changé.  Mais en tapant le *#0808#  il est directement coché MTP, et non plus RNDIS + ACM + DM. 
Mais seul le chargement est affiché.

Hors ligne

#38 Le 14/05/2022, à 18:44

Nuliel

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Bonjour
Perso quand je branche mon téléphone, par défaut il est en charge uniquement. Il faut que je descende la barre du haut, cliquer sur la nouvelle notification en bas du menu descendu afin de pouvoir passer le smartphone en partage de fichiers. On est d'accord que tu n'as pas cette notification?

Hors ligne

#39 Le 14/05/2022, à 19:15

aucito

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Bonsoir. Content de vous retrouver.
Oui, nous sommes d'accord, quand je touche paramètres chargement par câble et que je glisse le doigt vers le bas, il devrait me montrer plusieurs autres options, mais ici il précise combien de temps pour complet rechargement, c'est tout. Et dans le système de fichiers de mon pc, il n'apparaît plus jamais, alors qu´un autre smartphone bas de gamme, konrow just5, s'y affiche dès le branchement.
Merci. Bien à vous.

Hors ligne

#40 Le 14/05/2022, à 20:10

Nuliel

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Et qu'est ce que cela donne avec le debogage usb désactivé?
Il devrait au moins correctement apparaître dans lsusb

Dernière modification par Nuliel (Le 14/05/2022, à 20:11)

Hors ligne

#41 Le 14/05/2022, à 20:30

aucito

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Voici, apparemment même usb debogué, il n'y apparaît pas.. 

aucito@W5au:~$ lsusb
Bus 002 Device 003: ID 0bda:b812 Realtek Semiconductor Corp. RTL88x2bu [AC1200 Techkey]
Bus 002 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
aucito@W5au:~$ 

Hors ligne

#42 Le 14/05/2022, à 20:42

Nuliel

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Seulement le câble qui charge, et systématiquement, pas de façon aléatoire..
Mais tout ça redonne quand même un peu espoir.

Est ce qu'à un moment, la charge était aléatoire?
Il faut savoir que certains câbles sont faits pour de la charge rapide (si je dis pas de bêtises, ça consiste à souder ensemble les deux broches de données, ce qui fait qu'on ne peut plus transférer de données mais on peut envoyer plus de jus), et d'autres permettent de transférer des données. On est d'accord que tu pouvais transférer des fichiers avant?

As tu un live usb sous la main? (la clé usb que tu as utilisé pour installer ubuntu)

Si oui, peux tu démarrer dessus, faire "essayer ubuntu", et voir si

lsusb

ou

sudo dmesg

contiennent des infos nouvelles relative à samsung?

Dernière modification par Nuliel (Le 14/05/2022, à 20:43)

Hors ligne

#43 Le 14/05/2022, à 20:52

aucito

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

J'avais installé Xubuntu avec un dvd , mais j'ai sous la main une clef d'installation de Ubuntu 18.0  ça pourrait aussi convenir?

Hors ligne

#44 Le 14/05/2022, à 21:30

aucito

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Voici; il m a fallu un peu de tps; désolé 

ubuntu@ubuntu:~$ lsusb
Bus 002 Device 004: ID 0bda:b812 Realtek Semiconductor Corp. 
Bus 002 Device 003: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 002 Device 002: ID 26bd:9917  
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
ubuntu@ubuntu:~$ sudo dmesg
[    0.000000] Linux version 5.3.0-28-generic (buildd@lcy01-amd64-009) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #30~18.04.1-Ubuntu SMP Fri Jan 17 06:14:09 UTC 2020 (Ubuntu 5.3.0-28.30~18.04.1-generic 5.3.13)
[    0.000000] Command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd quiet splash --- maybe-ubiquity
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd1a0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd1a1000-0x00000000bd1a6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd1a7000-0x00000000bd2b6fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd2b7000-0x00000000bd30efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd30f000-0x00000000bd3c5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd3c6000-0x00000000bd3d0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd3d1000-0x00000000bd3d3fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bd3d4000-0x00000000bd3d7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd3d8000-0x00000000bd3dbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd3dc000-0x00000000bd3defff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd3df000-0x00000000bd405fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd406000-0x00000000bd407fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bd408000-0x00000000bd60efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd60f000-0x00000000bd69efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd69f000-0x00000000bd6fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bd6ff000-0x00000000bd6fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdc00000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: LENOVO 4061A67/4061A67, BIOS 6FET92WW (3.22 ) 12/14/2011
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2526.795 MHz processor
[    0.007795] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.007797] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.007807] last_pfn = 0x13c000 max_arch_pfn = 0x400000000
[    0.007813] MTRR default type: uncachable
[    0.007814] MTRR fixed ranges enabled:
[    0.007815]   00000-9FFFF write-back
[    0.007816]   A0000-BFFFF uncachable
[    0.007817]   C0000-D3FFF write-protect
[    0.007818]   D4000-DBFFF uncachable
[    0.007819]   DC000-FFFFF write-protect
[    0.007820] MTRR variable ranges enabled:
[    0.007821]   0 base 13C000000 mask FFC000000 uncachable
[    0.007823]   1 base 0BE000000 mask FFE000000 uncachable
[    0.007824]   2 base 000000000 mask F80000000 write-back
[    0.007825]   3 base 080000000 mask FC0000000 write-back
[    0.007826]   4 base 100000000 mask FC0000000 write-back
[    0.007827]   5 base 0BDE00000 mask FFFE00000 uncachable
[    0.007828]   6 disabled
[    0.009484] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.009617] total RAM covered: 3998M
[    0.009903] Found optimal setting for mtrr clean up
[    0.009905]  gran_size: 64K 	chunk_size: 128M 	num_reg: 6  	lose cover RAM: 0G
[    0.011398] e820: update [mem 0xbde00000-0xffffffff] usable ==> reserved
[    0.011404] last_pfn = 0xbd700 max_arch_pfn = 0x400000000
[    0.018431] found SMP MP-table at [mem 0x000f6480-0x000f648f]
[    0.022823] check: Scanning 1 areas for low memory corruption
[    0.022830] BRK [0x12c601000, 0x12c601fff] PGTABLE
[    0.022832] BRK [0x12c602000, 0x12c602fff] PGTABLE
[    0.022834] BRK [0x12c603000, 0x12c603fff] PGTABLE
[    0.022948] BRK [0x12c604000, 0x12c604fff] PGTABLE
[    0.022950] BRK [0x12c605000, 0x12c605fff] PGTABLE
[    0.023399] BRK [0x12c606000, 0x12c606fff] PGTABLE
[    0.023420] BRK [0x12c607000, 0x12c607fff] PGTABLE
[    0.023530] BRK [0x12c608000, 0x12c608fff] PGTABLE
[    0.023637] BRK [0x12c609000, 0x12c609fff] PGTABLE
[    0.023865] BRK [0x12c60a000, 0x12c60afff] PGTABLE
[    0.024002] RAMDISK: [mem 0x7d60b000-0x7fffffff]
[    0.024012] ACPI: Early table checksum verification disabled
[    0.024017] ACPI: RSDP 0x00000000000F6440 000024 (v02 LENOVO)
[    0.024020] ACPI: XSDT 0x00000000BD649B55 00009C (v01 LENOVO TP-6F    00003220  LTP 00000000)
[    0.024028] ACPI: FACP 0x00000000BD649D00 0000F4 (v03 LENOVO TP-6F    00003220 LNVO 00000001)
[    0.024032] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20190703/tbfadt-569)
[    0.024036] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20190703/tbfadt-674)
[    0.024039] ACPI: DSDT 0x00000000BD64A10E 00FAE6 (v01 LENOVO TP-6F    00003220 MSFT 03000000)
[    0.024043] ACPI: FACS 0x00000000BD68E000 000040
[    0.024046] ACPI: FACS 0x00000000BD68E000 000040
[    0.024049] ACPI: SSDT 0x00000000BD649EB4 00025A (v01 LENOVO TP-6F    00003220 MSFT 03000000)
[    0.024053] ACPI: ECDT 0x00000000BD659BF4 000052 (v01 LENOVO TP-6F    00003220 LNVO 00000001)
[    0.024057] ACPI: APIC 0x00000000BD659C46 000078 (v01 LENOVO TP-6F    00003220 LNVO 00000001)
[    0.024061] ACPI: MCFG 0x00000000BD659CBE 00003C (v01 LENOVO TP-6F    00003220 LNVO 00000001)
[    0.024064] ACPI: HPET 0x00000000BD659CFA 000038 (v01 LENOVO TP-6F    00003220 LNVO 00000001)
[    0.024068] ACPI: SLIC 0x00000000BD659DC2 000176 (v01 LENOVO TP-6F    00003220  LTP 00000000)
[    0.024072] ACPI: BOOT 0x00000000BD659F38 000028 (v01 LENOVO TP-6F    00003220  LTP 00000001)
[    0.024075] ACPI: ASF! 0x00000000BD659F60 0000A0 (v16 LENOVO TP-6F    00003220 PTL  00000001)
[    0.024079] ACPI: SSDT 0x00000000BD68D1FA 000568 (v01 LENOVO TP-6F    00003220 INTL 20050513)
[    0.024083] ACPI: TCPA 0x00000000BD407000 000032 (v00                 00000000      00000000)
[    0.024086] ACPI: DMAR 0x00000000BD406000 000120 (v01        ?        00000001      00000000)
[    0.024090] ACPI: SSDT 0x00000000BD3D3000 000655 (v01 PmRef  CpuPm    00003000 INTL 20050624)
[    0.024094] ACPI: SSDT 0x00000000BD3D2000 000274 (v01 PmRef  Cpu0Tst  00003000 INTL 20050624)
[    0.024097] ACPI: SSDT 0x00000000BD3D1000 000242 (v01 PmRef  ApTst    00003000 INTL 20050624)
[    0.024110] ACPI: Local APIC address 0xfee00000
[    0.024215] No NUMA configuration found
[    0.024216] Faking a node at [mem 0x0000000000000000-0x000000013bffffff]
[    0.024229] NODE_DATA(0) allocated [mem 0x13bfd5000-0x13bffffff]
[    0.024511] Zone ranges:
[    0.024512]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.024514]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.024515]   Normal   [mem 0x0000000100000000-0x000000013bffffff]
[    0.024516]   Device   empty
[    0.024517] Movable zone start for each node
[    0.024520] Early memory node ranges
[    0.024521]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.024522]   node   0: [mem 0x0000000000100000-0x00000000bd1a0fff]
[    0.024523]   node   0: [mem 0x00000000bd1a7000-0x00000000bd2b6fff]
[    0.024524]   node   0: [mem 0x00000000bd30f000-0x00000000bd3c5fff]
[    0.024525]   node   0: [mem 0x00000000bd6ff000-0x00000000bd6fffff]
[    0.024526]   node   0: [mem 0x0000000100000000-0x000000013bffffff]
[    0.024707] Zeroed struct page in unavailable ranges: 11514 pages
[    0.024709] Initmem setup node 0 [mem 0x0000000000001000-0x000000013bffffff]
[    0.024710] On node 0 totalpages: 1020678
[    0.024711]   DMA zone: 64 pages used for memmap
[    0.024712]   DMA zone: 21 pages reserved
[    0.024713]   DMA zone: 3997 pages, LIFO batch:0
[    0.024788]   DMA32 zone: 12046 pages used for memmap
[    0.024789]   DMA32 zone: 770921 pages, LIFO batch:63
[    0.048820]   Normal zone: 3840 pages used for memmap
[    0.048823]   Normal zone: 245760 pages, LIFO batch:63
[    0.055946] Reserving Intel graphics memory at [mem 0xbe000000-0xbfffffff]
[    0.056251] ACPI: PM-Timer IO Port: 0x1008
[    0.056253] ACPI: Local APIC address 0xfee00000
[    0.056266] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.056267] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.056281] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.056283] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.056285] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.056287] ACPI: IRQ0 used by override.
[    0.056288] ACPI: IRQ9 used by override.
[    0.056290] Using ACPI (MADT) for SMP configuration information
[    0.056292] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.056301] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.056339] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.056341] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.056342] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.056343] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[    0.056343] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[    0.056345] PM: Registered nosave memory: [mem 0xbd1a1000-0xbd1a6fff]
[    0.056347] PM: Registered nosave memory: [mem 0xbd2b7000-0xbd30efff]
[    0.056349] PM: Registered nosave memory: [mem 0xbd3c6000-0xbd3d0fff]
[    0.056350] PM: Registered nosave memory: [mem 0xbd3d1000-0xbd3d3fff]
[    0.056351] PM: Registered nosave memory: [mem 0xbd3d4000-0xbd3d7fff]
[    0.056351] PM: Registered nosave memory: [mem 0xbd3d8000-0xbd3dbfff]
[    0.056352] PM: Registered nosave memory: [mem 0xbd3dc000-0xbd3defff]
[    0.056353] PM: Registered nosave memory: [mem 0xbd3df000-0xbd405fff]
[    0.056354] PM: Registered nosave memory: [mem 0xbd406000-0xbd407fff]
[    0.056354] PM: Registered nosave memory: [mem 0xbd408000-0xbd60efff]
[    0.056355] PM: Registered nosave memory: [mem 0xbd60f000-0xbd69efff]
[    0.056356] PM: Registered nosave memory: [mem 0xbd69f000-0xbd6fefff]
[    0.056358] PM: Registered nosave memory: [mem 0xbd700000-0xbdbfffff]
[    0.056359] PM: Registered nosave memory: [mem 0xbdc00000-0xbfffffff]
[    0.056359] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.056360] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.056361] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.056361] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[    0.056362] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[    0.056363] PM: Registered nosave memory: [mem 0xfed00000-0xfed0ffff]
[    0.056363] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.056364] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.056365] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.056366] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.056366] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[    0.056367] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[    0.056368] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.056368] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.056369] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.056371] [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.056373] Booting paravirtualized kernel on bare hardware
[    0.056378] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.056387] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.057224] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[    0.057233] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[    0.057234] pcpu-alloc: [0] 0 1 2 3 
[    0.057280] Built 1 zonelists, mobility grouping on.  Total pages: 1004707
[    0.057281] Policy zone: Normal
[    0.057283] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd quiet splash --- maybe-ubiquity
[    0.058765] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.059395] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.059465] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.080514] Calgary: detecting Calgary via BIOS EBDA area
[    0.080515] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.114309] Memory: 3867956K/4082712K available (14339K kernel code, 2370K rwdata, 4668K rodata, 2660K init, 5076K bss, 214756K reserved, 0K cma-reserved)
[    0.114322] random: get_random_u64 called from __kmem_cache_create+0x41/0x540 with crng_init=0
[    0.114521] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.114543] Kernel/User page tables isolation: enabled
[    0.114569] ftrace: allocating 42927 entries in 168 pages
[    0.135702] rcu: Hierarchical RCU implementation.
[    0.135704] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.135705] 	Tasks RCU enabled.
[    0.135706] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.135707] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.139756] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.141774] Console: colour VGA+ 80x25
[    0.141780] printk: console [tty0] enabled
[    0.141803] ACPI: Core revision 20190703
[    0.141951] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.141967] APIC: Switch to symmetric I/O mode setup
[    0.141969] DMAR: Host address width 36
[    0.141970] DMAR: DRHD base: 0x000000feb03000 flags: 0x0
[    0.141975] DMAR: dmar0: reg_base_addr feb03000 ver 1:0 cap c9008020e30260 ecap 1000
[    0.141976] DMAR: DRHD base: 0x000000feb01000 flags: 0x0
[    0.141980] DMAR: dmar1: reg_base_addr feb01000 ver 1:0 cap c0000020630260 ecap 1000
[    0.141981] DMAR: DRHD base: 0x000000feb00000 flags: 0x0
[    0.141984] DMAR: dmar2: reg_base_addr feb00000 ver 1:0 cap c0000020630270 ecap 1000
[    0.141985] DMAR: DRHD base: 0x000000feb02000 flags: 0x1
[    0.141990] DMAR: dmar3: reg_base_addr feb02000 ver 1:0 cap c9008020630260 ecap 1000
[    0.141991] DMAR: RMRR base: 0x000000fc226c00 end: 0x000000fc2273ff
[    0.141992] DMAR: RMRR base: 0x000000bdc00000 end: 0x000000bfffffff
[    0.142409] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.161967] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x246c19fd92d, max_idle_ns: 440795258574 ns
[    0.161972] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.59 BogoMIPS (lpj=10107180)
[    0.161974] pid_max: default: 32768 minimum: 301
[    0.162014] LSM: Security Framework initializing
[    0.162026] Yama: becoming mindful.
[    0.162069] AppArmor: AppArmor initialized
[    0.162125] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.162145] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.162342] *** VALIDATE proc ***
[    0.162419] *** VALIDATE cgroup1 ***
[    0.162421] *** VALIDATE cgroup2 ***
[    0.162479] mce: CPU0: Thermal monitoring enabled (TM2)
[    0.162482] process: using mwait in idle threads
[    0.162486] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.162487] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.162489] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.162491] Spectre V2 : Mitigation: Full generic retpoline
[    0.162492] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.162493] Speculative Store Bypass: Vulnerable
[    0.162496] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.162656] Freeing SMP alternatives memory: 40K
[    0.274596] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.274748] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[    0.274754] ... version:                2
[    0.274755] ... bit width:              40
[    0.274756] ... generic registers:      2
[    0.274757] ... value mask:             000000ffffffffff
[    0.274757] ... max period:             000000007fffffff
[    0.274758] ... fixed-purpose events:   3
[    0.274759] ... event mask:             0000000700000003
[    0.274807] rcu: Hierarchical SRCU implementation.
[    0.276045] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.276132] smp: Bringing up secondary CPUs ...
[    0.276294] x86: Booting SMP configuration:
[    0.276295] .... node  #0, CPUs:      #1
[    0.006012] Disabled fast string operations
[    0.278056] smp: Brought up 1 node, 2 CPUs
[    0.278056] smpboot: Max logical packages: 2
[    0.278056] smpboot: Total of 2 processors activated (10107.18 BogoMIPS)
[    0.282324] devtmpfs: initialized
[    0.282324] x86/mm: Memory block size: 128MB
[    0.282692] PM: Registering ACPI NVS region [mem 0xbd3c6000-0xbd3d0fff] (45056 bytes)
[    0.282692] PM: Registering ACPI NVS region [mem 0xbd3d8000-0xbd3dbfff] (16384 bytes)
[    0.282692] PM: Registering ACPI NVS region [mem 0xbd3df000-0xbd405fff] (159744 bytes)
[    0.282692] PM: Registering ACPI NVS region [mem 0xbd60f000-0xbd69efff] (589824 bytes)
[    0.282693] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.282693] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.282693] pinctrl core: initialized pinctrl subsystem
[    0.282693] PM: RTC time: 20:00:27, date: 2022-05-14
[    0.282693] NET: Registered protocol family 16
[    0.282693] audit: initializing netlink subsys (disabled)
[    0.282693] audit: type=2000 audit(1652558427.140:1): state=initialized audit_enabled=0 res=1
[    0.282693] EISA bus registered
[    0.282693] cpuidle: using governor ladder
[    0.282693] cpuidle: using governor menu
[    0.282693] Simple Boot Flag at 0x35 set to 0x1
[    0.282693] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.282693] ACPI: bus type PCI registered
[    0.282693] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.282693] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.282693] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.282693] PCI: Using configuration type 1 for base access
[    0.286291] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.286291] ACPI: Added _OSI(Module Device)
[    0.286291] ACPI: Added _OSI(Processor Device)
[    0.286291] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.286291] ACPI: Added _OSI(Processor Aggregator Device)
[    0.286291] ACPI: Added _OSI(Linux-Dell-Video)
[    0.286291] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.286291] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.306450] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.307400] ACPI: EC: EC started
[    0.307401] ACPI: EC: interrupt blocked
[    0.308509] ACPI: \: Used as first EC
[    0.308511] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.308512] ACPI: EC: Boot ECDT EC used to handle transactions
[    0.309298] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.322545] ACPI: Dynamic OEM Table Load:
[    0.322553] ACPI: SSDT 0xFFFF9A08368D2400 0002C8 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[    0.323678] ACPI: Dynamic OEM Table Load:
[    0.323685] ACPI: SSDT 0xFFFF9A08373AD000 00087A (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[    0.325400] ACPI: Dynamic OEM Table Load:
[    0.325406] ACPI: SSDT 0xFFFF9A08369B8400 0001CF (v01 PmRef  ApIst    00003000 INTL 20050624)
[    0.326218] ACPI: Dynamic OEM Table Load:
[    0.326218] ACPI: SSDT 0xFFFF9A083694AE40 00008D (v01 PmRef  ApCst    00003000 INTL 20050624)
[    0.330144] ACPI: Interpreter enabled
[    0.330167] ACPI: (supports S0 S3 S4 S5)
[    0.330168] ACPI: Using IOAPIC for interrupt routing
[    0.330197] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.334238] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.362626] ACPI: Power Resource [PUBS] (on)
[    0.362626] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.363859] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[    0.373046] acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
[    0.373623] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.373791] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    0.373958] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.374130] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.374297] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.374464] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[    0.374631] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[    0.374797] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.374919] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.374925] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.375504] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.376176] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.376178] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.376192] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.376481] PCI host bridge to bus 0000:00
[    0.376484] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.376485] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.376487] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.376488] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.376490] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.376491] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.376493] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.376505] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.376531] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset
[    0.376533] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability
[    0.376633] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[    0.376646] pci 0000:00:02.0: reg 0x10: [mem 0xf4400000-0xf47fffff 64bit]
[    0.376653] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.376657] pci 0000:00:02.0: reg 0x20: [io  0x1800-0x1807]
[    0.376773] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[    0.376784] pci 0000:00:02.1: reg 0x10: [mem 0xf4200000-0xf42fffff 64bit]
[    0.376907] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000
[    0.376924] pci 0000:00:03.0: reg 0x10: [mem 0xfc226800-0xfc22680f 64bit]
[    0.376974] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.377070] pci 0000:00:03.3: [8086:2a47] type 00 class 0x070002
[    0.377084] pci 0000:00:03.3: reg 0x10: [io  0x1830-0x1837]
[    0.377091] pci 0000:00:03.3: reg 0x14: [mem 0xfc024000-0xfc024fff]
[    0.377268] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[    0.377294] pci 0000:00:19.0: reg 0x10: [mem 0xfc000000-0xfc01ffff]
[    0.377304] pci 0000:00:19.0: reg 0x14: [mem 0xfc025000-0xfc025fff]
[    0.377315] pci 0000:00:19.0: reg 0x18: [io  0x1840-0x185f]
[    0.377398] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.377512] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.377571] pci 0000:00:1a.0: reg 0x20: [io  0x1860-0x187f]
[    0.377721] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.377780] pci 0000:00:1a.1: reg 0x20: [io  0x1880-0x189f]
[    0.377936] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.377997] pci 0000:00:1a.2: reg 0x20: [io  0x18a0-0x18bf]
[    0.378159] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.378185] pci 0000:00:1a.7: reg 0x10: [mem 0xfc226c00-0xfc226fff]
[    0.378286] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.378407] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.378437] pci 0000:00:1b.0: reg 0x10: [mem 0xfc020000-0xfc023fff 64bit]
[    0.378543] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.378658] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.378832] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.378961] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.379132] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.379261] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[    0.379432] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.379560] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.379731] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.379858] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.379917] pci 0000:00:1d.0: reg 0x20: [io  0x18c0-0x18df]
[    0.380077] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.380136] pci 0000:00:1d.1: reg 0x20: [io  0x18e0-0x18ff]
[    0.380283] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.380342] pci 0000:00:1d.2: reg 0x20: [io  0x1c00-0x1c1f]
[    0.380500] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.380526] pci 0000:00:1d.7: reg 0x10: [mem 0xfc227000-0xfc2273ff]
[    0.380627] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.380742] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.380931] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[    0.381176] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.381203] pci 0000:00:1f.2: reg 0x10: [io  0x1c48-0x1c4f]
[    0.381213] pci 0000:00:1f.2: reg 0x14: [io  0x183c-0x183f]
[    0.381224] pci 0000:00:1f.2: reg 0x18: [io  0x1c40-0x1c47]
[    0.381234] pci 0000:00:1f.2: reg 0x1c: [io  0x1838-0x183b]
[    0.381245] pci 0000:00:1f.2: reg 0x20: [io  0x1c20-0x1c3f]
[    0.381255] pci 0000:00:1f.2: reg 0x24: [mem 0xfc226000-0xfc2267ff]
[    0.381318] pci 0000:00:1f.2: PME# supported from D3hot
[    0.381429] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.381455] pci 0000:00:1f.3: reg 0x10: [mem 0xfc227400-0xfc2274ff 64bit]
[    0.381484] pci 0000:00:1f.3: reg 0x20: [io  0x1c60-0x1c7f]
[    0.381656] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.381775] pci 0000:03:00.0: [8086:4236] type 00 class 0x028000
[    0.381839] pci 0000:03:00.0: reg 0x10: [mem 0xf4300000-0xf4301fff 64bit]
[    0.382070] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.382275] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.382282] pci 0000:00:1c.1:   bridge window [mem 0xf4300000-0xf43fffff]
[    0.382368] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.382372] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.382376] pci 0000:00:1c.3:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.382383] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
[    0.382453] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[    0.382457] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.382461] pci 0000:00:1c.4:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.382468] pci 0000:00:1c.4:   bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
[    0.382492] pci_bus 0000:15: extended config space not accessible
[    0.382545] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
[    0.382561] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via CardBus function)
[    0.382563] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
[    0.382587] pci 0000:15:00.0: reg 0x10: [mem 0xf4800000-0xf4800fff]
[    0.382632] pci 0000:15:00.0: supports D1 D2
[    0.382634] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.382707] pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010
[    0.382732] pci 0000:15:00.1: reg 0x10: [mem 0xf4801000-0xf48017ff]
[    0.382850] pci 0000:15:00.1: supports D1 D2
[    0.382851] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.382919] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
[    0.382944] pci 0000:15:00.2: reg 0x10: [mem 0xf4801800-0xf48018ff]
[    0.383061] pci 0000:15:00.2: supports D1 D2
[    0.383063] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.383130] pci 0000:15:00.4: [1180:0592] type 00 class 0x088000
[    0.383155] pci 0000:15:00.4: reg 0x10: [mem 0xf4802000-0xf48020ff]
[    0.383272] pci 0000:15:00.4: supports D1 D2
[    0.383273] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.383340] pci 0000:15:00.5: [1180:0852] type 00 class 0x088000
[    0.383365] pci 0000:15:00.5: reg 0x10: [mem 0xf4802400-0xf48024ff]
[    0.383482] pci 0000:15:00.5: supports D1 D2
[    0.383484] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[    0.383599] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[    0.383603] pci 0000:00:1e.0:   bridge window [io  0x4000-0x7fff]
[    0.383607] pci 0000:00:1e.0:   bridge window [mem 0xf4800000-0xf7ffffff]
[    0.383614] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[    0.383616] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.383617] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.383619] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.383620] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.383622] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.383623] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[    0.383668] pci_bus 0000:16: extended config space not accessible
[    0.383690] pci_bus 0000:16: busn_res: [bus 16-18] end is updated to 17
[    0.390041] ACPI: EC: interrupt unblocked
[    0.390054] ACPI: EC: event unblocked
[    0.390061] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.390063] ACPI: \_SB_.PCI0.LPC_.EC__: Boot DSDT EC used to handle transactions and events
[    0.390212] SCSI subsystem initialized
[    0.390223] libata version 3.00 loaded.
[    0.390223] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.390223] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.390223] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.390223] vgaarb: loaded
[    0.390223] ACPI: bus type USB registered
[    0.390223] usbcore: registered new interface driver usbfs
[    0.390223] usbcore: registered new interface driver hub
[    0.390223] usbcore: registered new device driver usb
[    0.390223] pps_core: LinuxPPS API ver. 1 registered
[    0.390223] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.390223] PTP clock support registered
[    0.390223] EDAC MC: Ver: 3.0.0
[    0.390384] PCI: Using ACPI for IRQ routing
[    0.394352] PCI: pci_cache_line_size set to 64 bytes
[    0.394486] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.394487] e820: reserve RAM buffer [mem 0xbd1a1000-0xbfffffff]
[    0.394489] e820: reserve RAM buffer [mem 0xbd2b7000-0xbfffffff]
[    0.394491] e820: reserve RAM buffer [mem 0xbd3c6000-0xbfffffff]
[    0.394493] e820: reserve RAM buffer [mem 0xbd700000-0xbfffffff]
[    0.394616] NetLabel: Initializing
[    0.394617] NetLabel:  domain hash size = 128
[    0.394617] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.394637] NetLabel:  unlabeled traffic allowed by default
[    0.394655] hpet: 4 channels of 0 reserved for per-cpu timers
[    0.394655] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.394655] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.396488] clocksource: Switched to clocksource tsc-early
[    0.413754] VFS: Disk quotas dquot_6.6.0
[    0.413778] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.413822] *** VALIDATE hugetlbfs ***
[    0.413962] AppArmor: AppArmor Filesystem Enabled
[    0.414009] pnp: PnP ACPI init
[    0.434799] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.434801] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.434803] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.434804] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[    0.434809] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.434811] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[    0.434812] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[    0.434814] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.434816] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.434818] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.434819] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.434821] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.434823] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.434825] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.434827] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.434834] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.454865] system 00:01: [io  0x1000-0x107f] has been reserved
[    0.454867] system 00:01: [io  0x1180-0x11ff] has been reserved
[    0.454870] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.454872] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.454873] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.454875] system 00:01: [io  0x1680-0x169f] has been reserved
[    0.454877] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.454879] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.454881] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.454883] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.454885] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.454886] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.454892] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.454972] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.455004] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.455035] pnp 00:04: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[    0.475072] pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.475865] pnp: PnP ACPI: found 6 devices
[    0.477832] thermal_sys: Registered thermal governor 'fair_share'
[    0.477833] thermal_sys: Registered thermal governor 'bang_bang'
[    0.477834] thermal_sys: Registered thermal governor 'step_wise'
[    0.477834] thermal_sys: Registered thermal governor 'user_space'
[    0.477835] thermal_sys: Registered thermal governor 'power_allocator'
[    0.482343] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.482392] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.482395] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.482397] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.482399] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.482401] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.482423] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.482428] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.482433] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.482436] pci 0000:00:1c.0: BAR 13: assigned [io  0x8000-0x8fff]
[    0.482438] pci 0000:00:1c.1: BAR 13: assigned [io  0x9000-0x9fff]
[    0.482442] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.482445] pci 0000:00:1c.0:   bridge window [io  0x8000-0x8fff]
[    0.482451] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.482455] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.482462] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.482464] pci 0000:00:1c.1:   bridge window [io  0x9000-0x9fff]
[    0.482470] pci 0000:00:1c.1:   bridge window [mem 0xf4300000-0xf43fffff]
[    0.482474] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.482481] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.482483] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.482489] pci 0000:00:1c.3:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.482493] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
[    0.482500] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[    0.482502] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.482508] pci 0000:00:1c.4:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.482512] pci 0000:00:1c.4:   bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
[    0.482521] pci 0000:15:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref]
[    0.482525] pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
[    0.482526] pci 0000:15:00.0: BAR 13: assigned [io  0x4000-0x40ff]
[    0.482528] pci 0000:15:00.0: BAR 14: assigned [io  0x4400-0x44ff]
[    0.482530] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[    0.482532] pci 0000:15:00.0:   bridge window [io  0x4000-0x40ff]
[    0.482536] pci 0000:15:00.0:   bridge window [io  0x4400-0x44ff]
[    0.482541] pci 0000:15:00.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
[    0.482546] pci 0000:15:00.0:   bridge window [mem 0xc4000000-0xc7ffffff]
[    0.482552] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[    0.482554] pci 0000:00:1e.0:   bridge window [io  0x4000-0x7fff]
[    0.482560] pci 0000:00:1e.0:   bridge window [mem 0xf4800000-0xf7ffffff]
[    0.482564] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[    0.482571] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.482572] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.482574] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.482575] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[    0.482577] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[    0.482578] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window]
[    0.482580] pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
[    0.482581] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.482583] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.482584] pci_bus 0000:03: resource 0 [io  0x9000-0x9fff]
[    0.482586] pci_bus 0000:03: resource 1 [mem 0xf4300000-0xf43fffff]
[    0.482587] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.482589] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
[    0.482590] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
[    0.482592] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit pref]
[    0.482593] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.482595] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff]
[    0.482596] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref]
[    0.482597] pci_bus 0000:15: resource 0 [io  0x4000-0x7fff]
[    0.482599] pci_bus 0000:15: resource 1 [mem 0xf4800000-0xf7ffffff]
[    0.482600] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref]
[    0.482602] pci_bus 0000:15: resource 4 [io  0x0000-0x0cf7 window]
[    0.482603] pci_bus 0000:15: resource 5 [io  0x0d00-0xffff window]
[    0.482604] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.482606] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff window]
[    0.482607] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff window]
[    0.482609] pci_bus 0000:15: resource 9 [mem 0xc0000000-0xfebfffff window]
[    0.482610] pci_bus 0000:16: resource 0 [io  0x4000-0x40ff]
[    0.482612] pci_bus 0000:16: resource 1 [io  0x4400-0x44ff]
[    0.482613] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[    0.482615] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
[    0.482742] NET: Registered protocol family 2
[    0.482955] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.483067] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.483314] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.483384] TCP: Hash tables configured (established 32768 bind 32768)
[    0.483492] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.483528] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.483658] NET: Registered protocol family 1
[    0.483667] NET: Registered protocol family 44
[    0.483678] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.485006] PCI: CLS 64 bytes, default 64
[    0.485062] Trying to unpack rootfs image as initramfs...
[    9.097883] Freeing initrd memory: 42964K
[    9.117987] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    9.117990] software IO TLB: mapped [mem 0xb91a1000-0xbd1a1000] (64MB)
[    9.118169] check: Scanning for low memory corruption every 60 seconds
[    9.118717] Initialise system trusted keyrings
[    9.118732] Key type blacklist registered
[    9.118824] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    9.120993] zbud: loaded
[    9.121516] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    9.121746] fuse: init (API version 7.31)
[    9.121904] Platform Keyring initialized
[    9.127387] Key type asymmetric registered
[    9.127388] Asymmetric key parser 'x509' registered
[    9.127399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    9.127436] io scheduler mq-deadline registered
[    9.127845] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[    9.127880] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
[    9.128189] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25
[    9.128231] pcieport 0000:00:1c.1: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
[    9.128500] pcieport 0000:00:1c.3: PME: Signaling with IRQ 26
[    9.128532] pcieport 0000:00:1c.3: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
[    9.128789] pcieport 0000:00:1c.4: PME: Signaling with IRQ 27
[    9.128822] pcieport 0000:00:1c.4: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
[    9.128971] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.129057] intel_idle: does not run on family 6 model 23
[    9.129457] ACPI: AC Adapter [AC] (on-line)
[    9.129526] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    9.129541] ACPI: Lid Switch [LID]
[    9.129582] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    9.129592] ACPI: Sleep Button [SLPB]
[    9.129646] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    9.129654] ACPI: Power Button [PWRF]
[    9.130201] Monitor-Mwait will be used to enter C-1 state
[    9.130208] Monitor-Mwait will be used to enter C-2 state
[    9.130213] Monitor-Mwait will be used to enter C-3 state
[    9.130218] tsc: Marking TSC unstable due to TSC halts in idle
[    9.130272] clocksource: Switched to clocksource hpet
[    9.134988] thermal LNXTHERM:00: registered as thermal_zone0
[    9.134990] ACPI: Thermal Zone [THM0] (59 C)
[    9.136822] thermal LNXTHERM:01: registered as thermal_zone1
[    9.136823] ACPI: Thermal Zone [THM1] (62 C)
[    9.137594] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    9.176229] 0000:00:03.3: ttyS4 at I/O 0x1830 (irq = 17, base_baud = 115200) is a 16550A
[    9.176809] Linux agpgart interface v0.103
[    9.177605] battery: ACPI: Battery Slot [BAT0] (battery present)
[    9.184864] tpm_tis 00:05: 1.2 TPM (device-id 0x1020, rev-id 6)
[    9.187649] random: fast init done
[    9.204799] loop: module loaded
[    9.205122] libphy: Fixed MDIO Bus: probed
[    9.205123] tun: Universal TUN/TAP device driver, 1.6
[    9.205193] PPP generic driver version 2.4.2
[    9.205261] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.205265] ehci-pci: EHCI PCI platform driver
[    9.205405] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    9.205412] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    9.205425] ehci-pci 0000:00:1a.7: debug port 1
[    9.209358] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    9.209374] ehci-pci 0000:00:1a.7: irq 23, io mem 0xfc226c00
[    9.222060] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    9.222110] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    9.222112] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.222114] usb usb1: Product: EHCI Host Controller
[    9.222115] usb usb1: Manufacturer: Linux 5.3.0-28-generic ehci_hcd
[    9.222117] usb usb1: SerialNumber: 0000:00:1a.7
[    9.222275] hub 1-0:1.0: USB hub found
[    9.222283] hub 1-0:1.0: 6 ports detected
[    9.222670] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    9.222677] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    9.222688] ehci-pci 0000:00:1d.7: debug port 1
[    9.226599] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    9.226609] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfc227000
[    9.227728] Monitor-Mwait will be used to enter C-3 state
[    9.241995] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    9.242059] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    9.242061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.242062] usb usb2: Product: EHCI Host Controller
[    9.242064] usb usb2: Manufacturer: Linux 5.3.0-28-generic ehci_hcd
[    9.242065] usb usb2: SerialNumber: 0000:00:1d.7
[    9.242221] hub 2-0:1.0: USB hub found
[    9.242228] hub 2-0:1.0: 6 ports detected
[    9.242522] ehci-platform: EHCI generic platform driver
[    9.242544] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    9.242547] ohci-pci: OHCI PCI platform driver
[    9.242559] ohci-platform: OHCI generic platform driver
[    9.242566] uhci_hcd: USB Universal Host Controller Interface driver
[    9.242657] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    9.242662] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    9.242669] uhci_hcd 0000:00:1a.0: detected 2 ports
[    9.242697] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[    9.242749] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[    9.242750] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.242752] usb usb3: Product: UHCI Host Controller
[    9.242753] usb usb3: Manufacturer: Linux 5.3.0-28-generic uhci_hcd
[    9.242754] usb usb3: SerialNumber: 0000:00:1a.0
[    9.242897] hub 3-0:1.0: USB hub found
[    9.242904] hub 3-0:1.0: 2 ports detected
[    9.243134] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    9.243139] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    9.243145] uhci_hcd 0000:00:1a.1: detected 2 ports
[    9.243176] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[    9.243227] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[    9.243229] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.243230] usb usb4: Product: UHCI Host Controller
[    9.243232] usb usb4: Manufacturer: Linux 5.3.0-28-generic uhci_hcd
[    9.243233] usb usb4: SerialNumber: 0000:00:1a.1
[    9.243374] hub 4-0:1.0: USB hub found
[    9.243381] hub 4-0:1.0: 2 ports detected
[    9.243624] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    9.243629] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    9.243635] uhci_hcd 0000:00:1a.2: detected 2 ports
[    9.243660] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[    9.243709] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[    9.243711] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.243713] usb usb5: Product: UHCI Host Controller
[    9.243714] usb usb5: Manufacturer: Linux 5.3.0-28-generic uhci_hcd
[    9.243715] usb usb5: SerialNumber: 0000:00:1a.2
[    9.243856] hub 5-0:1.0: USB hub found
[    9.243863] hub 5-0:1.0: 2 ports detected
[    9.244106] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    9.244111] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    9.244116] uhci_hcd 0000:00:1d.0: detected 2 ports
[    9.244143] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[    9.244207] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[    9.244209] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.244210] usb usb6: Product: UHCI Host Controller
[    9.244212] usb usb6: Manufacturer: Linux 5.3.0-28-generic uhci_hcd
[    9.244213] usb usb6: SerialNumber: 0000:00:1d.0
[    9.244358] hub 6-0:1.0: USB hub found
[    9.244364] hub 6-0:1.0: 2 ports detected
[    9.244585] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    9.244590] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    9.244596] uhci_hcd 0000:00:1d.1: detected 2 ports
[    9.244626] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[    9.244677] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[    9.244679] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.244680] usb usb7: Product: UHCI Host Controller
[    9.244681] usb usb7: Manufacturer: Linux 5.3.0-28-generic uhci_hcd
[    9.244683] usb usb7: SerialNumber: 0000:00:1d.1
[    9.244824] hub 7-0:1.0: USB hub found
[    9.244830] hub 7-0:1.0: 2 ports detected
[    9.245063] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    9.245068] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    9.245073] uhci_hcd 0000:00:1d.2: detected 2 ports
[    9.245106] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[    9.245156] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[    9.245157] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.245159] usb usb8: Product: UHCI Host Controller
[    9.245160] usb usb8: Manufacturer: Linux 5.3.0-28-generic uhci_hcd
[    9.245161] usb usb8: SerialNumber: 0000:00:1d.2
[    9.245298] hub 8-0:1.0: USB hub found
[    9.245305] hub 8-0:1.0: 2 ports detected
[    9.245511] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    9.253858] serio: i8042 KBD port at 0x60,0x64 irq 1
[    9.253862] serio: i8042 AUX port at 0x60,0x64 irq 12
[    9.254054] mousedev: PS/2 mouse device common for all mice
[    9.254323] rtc_cmos 00:02: RTC can wake from S4
[    9.254505] rtc_cmos 00:02: registered as rtc0
[    9.254527] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    9.254534] i2c /dev entries driver
[    9.254583] device-mapper: uevent: version 1.0.3
[    9.254674] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[    9.254696] platform eisa.0: Probing EISA bus 0
[    9.254698] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    9.254699] platform eisa.0: Cannot allocate resource for EISA slot 1
[    9.254701] platform eisa.0: Cannot allocate resource for EISA slot 2
[    9.254702] platform eisa.0: Cannot allocate resource for EISA slot 3
[    9.254703] platform eisa.0: Cannot allocate resource for EISA slot 4
[    9.254705] platform eisa.0: Cannot allocate resource for EISA slot 5
[    9.254706] platform eisa.0: Cannot allocate resource for EISA slot 6
[    9.254708] platform eisa.0: Cannot allocate resource for EISA slot 7
[    9.254709] platform eisa.0: Cannot allocate resource for EISA slot 8
[    9.254711] platform eisa.0: EISA: Detected 0 cards
[    9.254714] intel_pstate: CPU model not supported
[    9.254745] ledtrig-cpu: registered to indicate activity on CPUs
[    9.255032] NET: Registered protocol family 10
[    9.260226] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    9.262111] Segment Routing with IPv6
[    9.262135] NET: Registered protocol family 17
[    9.262188] Key type dns_resolver registered
[    9.262384] RAS: Correctable Errors collector initialized.
[    9.262417] microcode: sig=0x1067a, pf=0x80, revision=0xa0c
[    9.262472] microcode: Microcode Update Driver: v2.2.
[    9.262661] registered taskstats version 1
[    9.262674] Loading compiled-in X.509 certificates
[    9.264847] Loaded X.509 cert 'Build time autogenerated kernel key: c209d4e4513ddb6584e17c46859deb0bc3f91652'
[    9.264878] zswap: loaded using pool lzo/zbud
[    9.271339] Key type big_key registered
[    9.271343] Key type trusted registered
[    9.274415] Key type encrypted registered
[    9.274417] AppArmor: AppArmor sha1 policy hashing enabled
[    9.274427] ima: Allocated hash algorithm: sha1
[    9.338905] No architecture policies found
[    9.338920] evm: Initialising EVM extended attributes:
[    9.338922] evm: security.selinux
[    9.338923] evm: security.SMACK64
[    9.338924] evm: security.SMACK64EXEC
[    9.338925] evm: security.SMACK64TRANSMUTE
[    9.338926] evm: security.SMACK64MMAP
[    9.338927] evm: security.apparmor
[    9.338928] evm: security.ima
[    9.338929] evm: security.capability
[    9.338930] evm: HMAC attrs: 0x1
[    9.339507] PM:   Magic number: 6:130:43
[    9.339681] rtc_cmos 00:02: setting system clock to 2022-05-14T20:00:36 UTC (1652558436)
[    9.342663] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    9.344834] Freeing unused decrypted memory: 2040K
[    9.345766] Freeing unused kernel image memory: 2660K
[    9.345814] Write protecting the kernel read-only data: 22528k
[    9.347049] Freeing unused kernel image memory: 2008K
[    9.347768] Freeing unused kernel image memory: 1476K
[    9.363280] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    9.363310] x86/mm: Checking user space page tables
[    9.378468] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    9.378472] Run /init as init process
[    9.394380] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    9.394525] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    9.394533] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    9.523702] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    9.523703] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    9.523962] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    9.526241] sdhci: Secure Digital Host Controller Interface driver
[    9.526242] sdhci: Copyright(c) Pierre Ossman
[    9.529546] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
[    9.529636] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    9.529699] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    9.536223] ahci 0000:00:1f.2: version 3.0
[    9.536389] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    9.536412] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    9.536415] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs 
[    9.537024] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    9.537202] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    9.537216] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
[    9.561279] scsi host0: ahci
[    9.570101] scsi host1: ahci
[    9.573912] pci 0000:00:00.0: Intel GM45 Chipset
[    9.573931] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    9.575385] pci 0000:00:00.0: detected 32768K stolen memory
[    9.575687] i915 0000:00:02.0: vgaarb: deactivate vga console
[    9.576359] scsi host2: ahci
[    9.576383] Console: switching to colour dummy device 80x25
[    9.577103] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.577103] [drm] Driver supports precise vblank timestamp query.
[    9.578656] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.580308] scsi host3: ahci
[    9.580389] ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 29
[    9.580392] ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 29
[    9.580393] ata3: DUMMY
[    9.580394] ata4: DUMMY
[    9.585985] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    9.605015] [drm] RC6 disabled, disabling runtime PM support
[    9.606177] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[    9.606604] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    9.608803] acpi device:01: registered as cooling_device2
[    9.608909] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    9.619738] fbcon: i915drmfb (fb0) is primary device
[    9.624648] firewire_ohci 0000:15:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    9.700516] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:27:13:b2:82:5e
[    9.700518] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    9.700545] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[    9.701534] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    9.745927] usb 2-1: New USB device found, idVendor=26bd, idProduct=9917, bcdDevice= 1.00
[    9.745930] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    9.745932] usb 2-1: Product: USB DISK 2.0
[    9.745935] usb 2-1: Manufacturer:         
[    9.745937] usb 2-1: SerialNumber: 07014795ECB2FA47
[    9.874083] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    9.898016] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    9.899838] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    9.899840] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    9.899842] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    9.901629] ata1.00: ATA-8: ST9160412AS, 0003LVM1, max UDMA/100
[    9.901631] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 32)
[    9.903935] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    9.903938] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    9.903940] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    9.905662] ata1.00: configured for UDMA/100
[    9.916485] scsi 0:0:0:0: Direct-Access     ATA      ST9160412AS      LVM1 PQ: 0 ANSI: 5
[    9.916723] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    9.916924] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    9.916955] sd 0:0:0:0: [sda] Write Protect is off
[    9.916957] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    9.916991] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    9.967528]  sda: sda1 sda2 sda3 < sda5 >
[    9.968255] sd 0:0:0:0: [sda] Attached SCSI disk
[   10.030684] usb 2-2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[   10.030687] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   10.030689] usb 2-2: Product: USB 2.0 Hub
[   10.030937] hub 2-2:1.0: USB hub found
[   10.031036] hub 2-2:1.0: 4 ports detected
[   10.036356] usb-storage 2-1:1.0: USB Mass Storage device detected
[   10.036660] scsi host4: usb-storage 2-1:1.0
[   10.037105] usbcore: registered new interface driver usb-storage
[   10.038653] usbcore: registered new interface driver uas
[   10.116798] Console: switching to colour frame buffer device 240x75
[   10.139278] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[   10.162148] firewire_core 0000:15:00.1: created device fw0: GUID 00061b032a528e9e, S400
[   10.229864] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   10.232554] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[   10.233141] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[   10.233144] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[   10.234601] ata2.00: ATAPI: MATSHITADVD-RAM UJ892, SB01, max UDMA/100
[   10.238058] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[   10.238690] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[   10.238693] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[   10.240093] ata2.00: configured for UDMA/100
[   10.253781] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ892    SB01 PQ: 0 ANSI: 5
[   10.316517] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   10.316519] cdrom: Uniform CD-ROM driver Revision: 3.20
[   10.316800] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   10.316866] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   10.347044] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   10.363449] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
[   10.426018] usb 2-2.4: new high-speed USB device number 4 using ehci-pci
[   10.643164] usb 2-2.4: New USB device found, idVendor=0bda, idProduct=b812, bcdDevice= 2.10
[   10.643168] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   10.643170] usb 2-2.4: Product: USB3.0 802.11ac 1200M Adapter
[   10.643173] usb 2-2.4: Manufacturer: Realtek
[   10.643175] usb 2-2.4: SerialNumber: 123456
[   11.055079] scsi 4:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 6
[   11.056980] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   11.058666] sd 4:0:0:0: [sdb] 15654912 512-byte logical blocks: (8.02 GB/7.46 GiB)
[   11.059915] sd 4:0:0:0: [sdb] Write Protect is off
[   11.059917] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[   11.061178] sd 4:0:0:0: [sdb] No Caching mode page found
[   11.061229] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[   11.067191]  sdb: sdb1
[   11.071451] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[   11.440742] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   11.646577] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   11.669446] random: crng init done
[   11.669448] random: 7 urandom warning(s) missed due to ratelimiting
[   21.168919] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   21.190166] systemd[1]: Detected architecture x86-64.
[   21.191860] systemd[1]: Set hostname to <ubuntu>.
[   21.192059] systemd[1]: Initializing machine ID from random generator.
[   21.352210] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   21.352264] systemd[1]: Reached target User and Group Name Lookups.
[   21.352288] systemd[1]: Reached target Swap.
[   21.352537] systemd[1]: Created slice User and Session Slice.
[   21.352565] systemd[1]: Reached target Remote File Systems.
[   21.352748] systemd[1]: Created slice System Slice.
[   21.577326] lp: driver loaded but no devices found
[   21.599802] ppdev: user-space parallel port driver
[   21.681338] systemd-journald[1077]: Received request to flush runtime journal from PID 1
[   22.429090] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB.PCI0.LPC.PMIO) (20190703/utaddress-213)
[   22.429098] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   22.429101] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB.PCI0.LPC.LPIO) (20190703/utaddress-213)
[   22.429105] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   22.429106] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB.PCI0.LPC.LPIO) (20190703/utaddress-213)
[   22.429110] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   22.429111] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   22.438044] r592: driver successfully loaded
[   22.457055] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
[   22.485259] Non-volatile memory driver v1.3
[   22.534207] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   22.576826] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   22.590921] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[   22.590925] yenta_cardbus 0000:15:00.0: Socket status: 30000006
[   22.590931] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io  0x4000-0x7fff]
[   22.590933] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4800000-0xf7ffffff]
[   22.590935] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4800000-0xf7ffffff:
[   22.590939]  excluding 0xf4800000-0xf4b7ffff
[   22.590946] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref]
[   22.590948] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff:
[   22.590951]  excluding 0xf0000000-0xf3ffffff
[   22.662503] Intel(R) Wireless WiFi driver for Linux
[   22.662505] Copyright(c) 2003- 2015 Intel Corporation
[   22.695747] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   22.698612] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[   22.698614] thinkpad_acpi: http://ibm-acpi.sf.net/
[   22.698615] thinkpad_acpi: ThinkPad BIOS 6FET92WW (3.22 ), EC 7VHT16WW-1.06
[   22.698616] thinkpad_acpi: Lenovo ThinkPad W500, model 4061A67
[   22.698664] r852: driver loaded successfully
[   22.763116] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[   22.795069] thinkpad_acpi: radio switch found; radios are enabled
[   22.795092] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   22.795093] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   22.808482] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   22.821817] thinkpad_acpi: battery 1 registered (start 0, stop 0)
[   22.821823] battery: new extension: ThinkPad Battery Extension
[   22.821887] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[   22.907066] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   22.907069] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   22.907070] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   22.907072] iwlwifi 0000:03:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24
[   22.970282] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   23.531855] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   23.643702] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   23.643710]  excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[   23.643735] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   23.643742]  excluding 0xa0000000-0xa0ffffff
[   23.643761] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   23.643768]  excluding 0x60000000-0x60ffffff
[   23.648529] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[   23.649091] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[   23.649093] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   23.649095] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[   23.649096] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   23.649098] snd_hda_codec_conexant hdaudioC0D0:    dig-out=0x1c/0x0
[   23.649099] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   23.649101] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x18
[   23.649103] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1d
[   23.649105] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x17
[   23.651543] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   23.757955] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   23.758295] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   23.758424] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   23.758523] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   24.766036] intel_powerclamp: No package C-state available
[   24.802564] intel_powerclamp: No package C-state available
[   25.888995] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
[   26.045799] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
[   26.662201] audit: type=1400 audit(1652558453.820:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1552 comm="apparmor_parser"
[   26.662673] audit: type=1400 audit(1652558453.820:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1552 comm="apparmor_parser"
[   62.518839] audit: type=1400 audit(1652558489.676:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine" pid=4114 comm="apparmor_parser"
[   62.519071] audit: type=1400 audit(1652558489.676:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4114 comm="apparmor_parser"
[   62.553517] audit: type=1400 audit(1652558489.708:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.core" pid=4118 comm="apparmor_parser"
[   62.646906] audit: type=1400 audit(1652558489.804:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.core.hook.configure" pid=4119 comm="apparmor_parser"
[   66.726856] rfkill: input handler disabled
[  100.406881] audit: type=1400 audit(1652558527.564:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine" pid=4616 comm="apparmor_parser"
[  100.422137] audit: type=1400 audit(1652558527.580:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4616 comm="apparmor_parser"
[  100.451369] audit: type=1400 audit(1652558527.608:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.core" pid=4618 comm="apparmor_parser"
[  100.540105] audit: type=1400 audit(1652558527.696:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=4619 comm="apparmor_parser"
[  107.682424] audit: type=1400 audit(1652558534.840:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=4897 comm="apparmor_parser"
[  107.699364] audit: type=1400 audit(1652558534.856:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=4898 comm="apparmor_parser"
[  108.730593] audit: type=1400 audit(1652558535.888:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=4909 comm="apparmor_parser"
[  109.057226] audit: type=1400 audit(1652558536.212:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=4908 comm="apparmor_parser"
[  109.065988] audit: type=1400 audit(1652558536.220:16): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine" pid=4911 comm="apparmor_parser"
[  109.065994] audit: type=1400 audit(1652558536.220:17): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4911 comm="apparmor_parser"
[  109.071157] audit: type=1400 audit(1652558536.228:18): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=4913 comm="apparmor_parser"
[  109.072138] audit: type=1400 audit(1652558536.228:19): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=4914 comm="apparmor_parser"
[  109.924445] audit: type=1400 audit(1652558537.080:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-characters" pid=4983 comm="apparmor_parser"
[  110.038088] audit: type=1400 audit(1652558537.196:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=4984 comm="apparmor_parser"
[  113.344353] kauditd_printk_skb: 8 callbacks suppressed
[  113.344355] audit: type=1400 audit(1652558540.500:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-logs" pid=5080 comm="apparmor_parser"
[  113.431698] audit: type=1400 audit(1652558540.588:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=5081 comm="apparmor_parser"
[  113.438594] audit: type=1400 audit(1652558540.596:32): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine" pid=5083 comm="apparmor_parser"
[  113.438605] audit: type=1400 audit(1652558540.596:33): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=5083 comm="apparmor_parser"
[  113.444548] audit: type=1400 audit(1652558540.600:34): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=5085 comm="apparmor_parser"
[  113.448129] audit: type=1400 audit(1652558540.604:35): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=5086 comm="apparmor_parser"
[  114.345620] audit: type=1400 audit(1652558541.500:36): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=5156 comm="apparmor_parser"
[  114.467551] audit: type=1400 audit(1652558541.624:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=5157 comm="apparmor_parser"
[  115.870194] audit: type=1400 audit(1652558543.028:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=5167 comm="apparmor_parser"
[  115.959777] audit: type=1400 audit(1652558543.116:39): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=5168 comm="apparmor_parser"
ubuntu@ubuntu:~$ 

Hors ligne

#45 Le 14/05/2022, à 21:37

Nuliel

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Aucune différence avec ton install, donc ça vient pas de ton install hmm
C'est très étrange que lsusb ne liste pas le galaxy s8+
Je vais faire quelques recherches (faut que je vérifie un truc en particulier)

Dernière modification par Nuliel (Le 14/05/2022, à 21:38)

Hors ligne

#46 Le 14/05/2022, à 21:41

aucito

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Merci.

Hors ligne

#47 Le 14/05/2022, à 21:56

aucito

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

J'ai oublié de te répondre, que le chargement n'est pas aléatoire, que j'ai déjà fait du reverse tethering avec ce câble, il n'est pas spécialisé pour le chargement rapide.
Mais au cours d'un surf sur internet en reverse tethering, j'ai eu quelque chose d'anormal, c'était tiktok qui débitait quelque chose en audio, inarrêtable. Aussi bien pour le S8+ que pour le PC. J'ai dû faire le nécessaire, pousser sans doute avec force sur le bouton marche-arrêt, et j'ai pu éteindre, mais j'ai soupćonné un virus et fait des mises à jour sur le smartphone et sur le pc.  Je ne sais pas si ça peut avoir quelque chose à voir?

Hors ligne

#48 Le 14/05/2022, à 21:59

Nuliel

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Bon j'ai malheureusement rien trouvé en faisant quelques recherches. Je ne sais pas s'il est question d'un câble défectueux qui aurait passé le port usb dans un autre mode (c'est très peu documenté). Je reprendrai demain.

Hors ligne

#49 Le 14/05/2022, à 22:02

aucito

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Merci beaucoup.
A bientôt.

Hors ligne

#50 Le 15/05/2022, à 10:17

aucito

Re : S8+ relié par cable usb à PC qui ne le reconnait pas

Bonjour.
Je commence à me demander si le connecteur usb-c du smartphone n'est pas fichu pour autre chose que la charge?
Bien à vous.

Hors ligne