Pages : 1
#1 Le 06/02/2022, à 11:07
- phleconte
plantage mais fonctionne en mode sans échec
Bonjour,
l'Asus sous KDE neon après une décharge intempestive et complète de la batterie, redémarre avec un écran zébré, je ne trouve pas de qualificatif plus précis, et de ce fait complètement inaccessible. Après l'avoir mis à jour vers neon 5.23.5 grâce au mode sans échec, les choses ont assez peu changé :
- en mode normal, le démarrage aboutit toujours à l'écran zébré inaccessible
- avec le grub en démarrant en mode récupération et en choisissant "reprendre un démarrage normal", la session s'ouvre en mode sans échec avec une configuration d'écran minimale mais complètement fonctionnel
- le démarrage sur les kernels antérieurs ne change rien
- il y a de la place sur le /, le problème ne vient pas de là
Auriez vous une idée pour sortir de cette situation ?
Merci d'avance et bonne journée
HP x360 1040 G8 / station d'accueil
Kubuntu 24.04.1
Kernel 6.8
Hors ligne
#2 Le 06/02/2022, à 19:14
- phleconte
Re : plantage mais fonctionne en mode sans échec
Rebonjour,
ne parvenant pas à trouver de piste sur internet mais probablement aussi parce que je ne parviens pas à poser la bonne question, j'ai réinstallé Kubuntu en laissant le home intact. Le résultat était identique : démarrage normal et au moment où l'interface graphique se lance, écran zébré de toutes les couleurs avec impossibilité de faire quoi que ce soit. Du coup, j'ai trouvé par hasard une solution de contournement : je démarre en recovery / resume (reprendre un démarrage normal et tout marche normalement.
voici la carte graphique
philippe@Asus-UX310UA:~$ lspci -vnn | grep -A 12 '\''[030[02]\]' | grep -Ei "vga|3d|display|kernel"
00:02.0 VGA compatible controller [0300]: Intel Corporation Skylake GT2 [HD Graphics 520] [8086:1916] (rev 07) (prog-if 00 [VGA controller])
Kernel modules: i915
philippe@Asus-UX310UA:~$ philippe@Asus-UX310UA:~$ sudo lshw -enable pci -class display
*-display UNCLAIMED
description: VGA compatible controller
product: Skylake GT2 [HD Graphics 520]
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 07
width: 64 bits
clock: 33MHz
capabilities: pciexpress msi pm vga_controller bus_master cap_list
configuration: latency=0
resources: memory:de000000-deffffff memory:c0000000-cfffffff ioport:f000(size=64) memory:c0000-dffff
philippe@Asus-UX310UA:~$ philippe@Asus-UX310UA:~$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080
default connected primary 1920x1080+0+0 0mm x 0mm
1920x1080 77.00*
philippe@Asus-UX310UA:~$ et le dernier log de xorg
[ 9.721] (--) Log file renamed from "/var/log/Xorg.pid-953.log" to "/var/log/Xorg.0.log"
[ 9.721]
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[ 9.721] Build Operating System: linux Ubuntu
[ 9.721] Current Operating System: Linux Asus-UX310UA 5.4.0-97-generic #110-Ubuntu SMP Thu Jan 13 18:22:13 UTC 2022 x86_64
[ 9.721] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-97-generic root=UUID=4f0b5df4-5de2-442f-bf44-384052ba4174 ro recovery nomodeset dis_ucode_ldr
[ 9.721] Build Date: 14 December 2021 02:14:13PM
[ 9.721] xorg-server 2:1.20.13-1ubuntu1~20.04.2 (For technical support please see http://www.ubuntu.com/support)
[ 9.722] Current version of pixman: 0.38.4
[ 9.722] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.722] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.722] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 6 18:56:43 2022
[ 9.722] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 9.723] (==) No Layout section. Using the first Screen section.
[ 9.723] (==) No screen section available. Using defaults.
[ 9.723] (**) |-->Screen "Default Screen Section" (0)
[ 9.723] (**) | |-->Monitor "<default monitor>"
[ 9.724] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.724] (==) Automatically adding devices
[ 9.724] (==) Automatically enabling devices
[ 9.724] (==) Automatically adding GPU devices
[ 9.724] (==) Automatically binding GPU devices
[ 9.724] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 9.726] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 9.726] Entry deleted from font path.
[ 9.726] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 9.726] Entry deleted from font path.
[ 9.726] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 9.726] Entry deleted from font path.
[ 9.726] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 9.726] Entry deleted from font path.
[ 9.726] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 9.726] Entry deleted from font path.
[ 9.726] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 9.726] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 9.726] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.726] (II) Loader magic: 0x5621715b8020
[ 9.726] (II) Module ABI versions:
[ 9.726] X.Org ANSI C Emulation: 0.4
[ 9.726] X.Org Video Driver: 24.1
[ 9.726] X.Org XInput driver : 24.1
[ 9.726] X.Org Server Extension : 10.0
[ 9.727] (++) using VT number 1
[ 9.727] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 9.729] (--) PCI:*(0@0:2:0) 8086:1916:1043:1280 rev 7, Mem @ 0xde000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 9.729] (II) LoadModule: "glx"
[ 9.729] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 9.735] (II) Module glx: vendor="X.Org Foundation"
[ 9.735] compiled for 1.20.13, module version = 1.0.0
[ 9.735] ABI class: X.Org Server Extension, version 10.0
[ 9.735] (==) Matched modesetting as autoconfigured driver 0
[ 9.735] (==) Matched fbdev as autoconfigured driver 1
[ 9.735] (==) Matched vesa as autoconfigured driver 2
[ 9.735] (==) Assigned the driver to the xf86ConfigLayout
[ 9.735] (II) LoadModule: "modesetting"
[ 9.735] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 9.736] (II) Module modesetting: vendor="X.Org Foundation"
[ 9.736] compiled for 1.20.13, module version = 1.20.13
[ 9.736] Module class: X.Org Video Driver
[ 9.736] ABI class: X.Org Video Driver, version 24.1
[ 9.736] (II) LoadModule: "fbdev"
[ 9.736] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 9.736] (II) Module fbdev: vendor="X.Org Foundation"
[ 9.736] compiled for 1.20.1, module version = 0.5.0
[ 9.736] Module class: X.Org Video Driver
[ 9.736] ABI class: X.Org Video Driver, version 24.0
[ 9.736] (II) LoadModule: "vesa"
[ 9.736] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 9.737] (II) Module vesa: vendor="X.Org Foundation"
[ 9.737] compiled for 1.20.4, module version = 2.4.0
[ 9.737] Module class: X.Org Video Driver
[ 9.737] ABI class: X.Org Video Driver, version 24.0
[ 9.737] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 9.737] (II) FBDEV: driver for framebuffer: fbdev
[ 9.737] (II) VESA: driver for VESA chipsets: vesa
[ 9.737] (EE) open /dev/dri/card0: No such file or directory
[ 9.737] (WW) Falling back to old probe method for modesetting
[ 9.737] (EE) open /dev/dri/card0: No such file or directory
[ 9.737] (II) Loading sub module "fbdevhw"
[ 9.737] (II) LoadModule: "fbdevhw"
[ 9.737] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 9.738] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 9.738] compiled for 1.20.13, module version = 0.0.2
[ 9.738] ABI class: X.Org Video Driver, version 24.1
[ 9.738] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[ 9.738] (II) FBDEV(1): using default device
[ 9.738] (EE) Screen 0 deleted because of no matching config section.
[ 9.738] (II) UnloadModule: "modesetting"
[ 9.738] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.738] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 9.738] (==) FBDEV(0): RGB weight 888
[ 9.738] (==) FBDEV(0): Default visual is TrueColor
[ 9.738] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 9.738] (II) FBDEV(0): hardware: EFI VGA (video memory: 8100kB)
[ 9.738] (II) FBDEV(0): checking modes against framebuffer device...
[ 9.738] (II) FBDEV(0): checking modes against monitor...
[ 9.738] (II) FBDEV(0): Virtual size is 1920x1080 (pitch 1920)
[ 9.738] (**) FBDEV(0): Built-in mode "current": 207.4 MHz, 85.3 kHz, 77.2 Hz
[ 9.738] (II) FBDEV(0): Modeline "current"x0.0 207.38 1920 1952 2192 2432 1080 1084 1088 1104 -hsync -vsync -csync (85.3 kHz b)
[ 9.738] (==) FBDEV(0): DPI set to (96, 96)
[ 9.738] (II) Loading sub module "fb"
[ 9.738] (II) LoadModule: "fb"
[ 9.738] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 9.739] (II) Module fb: vendor="X.Org Foundation"
[ 9.739] compiled for 1.20.13, module version = 1.0.0
[ 9.739] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.739] (**) FBDEV(0): using shadow framebuffer
[ 9.739] (II) Loading sub module "shadow"
[ 9.739] (II) LoadModule: "shadow"
[ 9.739] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 9.739] (II) Module shadow: vendor="X.Org Foundation"
[ 9.739] compiled for 1.20.13, module version = 1.1.0
[ 9.739] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.739] (II) UnloadModule: "vesa"
[ 9.739] (II) Unloading vesa
[ 9.739] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[ 9.741] (==) FBDEV(0): Backing store enabled
[ 9.741] (==) FBDEV(0): DPMS enabled
[ 9.742] (II) Initializing extension Generic Event Extension
[ 9.742] (II) Initializing extension SHAPE
[ 9.742] (II) Initializing extension MIT-SHM
[ 9.742] (II) Initializing extension XInputExtension
[ 9.743] (II) Initializing extension XTEST
[ 9.743] (II) Initializing extension BIG-REQUESTS
[ 9.743] (II) Initializing extension SYNC
[ 9.743] (II) Initializing extension XKEYBOARD
[ 9.743] (II) Initializing extension XC-MISC
[ 9.743] (II) Initializing extension SECURITY
[ 9.743] (II) Initializing extension XFIXES
[ 9.744] (II) Initializing extension RENDER
[ 9.744] (II) Initializing extension RANDR
[ 9.744] (II) Initializing extension COMPOSITE
[ 9.744] (II) Initializing extension DAMAGE
[ 9.744] (II) Initializing extension MIT-SCREEN-SAVER
[ 9.745] (II) Initializing extension DOUBLE-BUFFER
[ 9.745] (II) Initializing extension RECORD
[ 9.745] (II) Initializing extension DPMS
[ 9.745] (II) Initializing extension Present
[ 9.745] (II) Initializing extension DRI3
[ 9.745] (II) Initializing extension X-Resource
[ 9.745] (II) Initializing extension XVideo
[ 9.745] (II) Initializing extension XVideo-MotionCompensation
[ 9.745] (II) Initializing extension SELinux
[ 9.745] (II) SELinux: Disabled on system
[ 9.745] (II) Initializing extension GLX
[ 9.746] (II) AIGLX: Screen 0 is not DRI2 capable
[ 9.941] (II) IGLX: Loaded and initialized swrast
[ 9.941] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 9.941] (II) Initializing extension XFree86-VidModeExtension
[ 9.942] (II) Initializing extension XFree86-DGA
[ 9.942] (II) Initializing extension XFree86-DRI
[ 9.942] (II) Initializing extension DRI2
[ 10.044] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 10.046] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 10.046] (II) LoadModule: "libinput"
[ 10.047] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 10.050] (II) Module libinput: vendor="X.Org Foundation"
[ 10.050] compiled for 1.20.4, module version = 0.29.0
[ 10.050] Module class: X.Org XInput Driver
[ 10.050] ABI class: X.Org XInput driver, version 24.1
[ 10.050] (II) Using input driver 'libinput' for 'Power Button'
[ 10.050] (**) Power Button: always reports core events
[ 10.050] (**) Option "Device" "/dev/input/event2"
[ 10.050] (**) Option "_source" "server/udev"
[ 10.053] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 10.053] (II) event2 - Power Button: device is a keyboard
[ 10.054] (II) event2 - Power Button: device removed
[ 10.071] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 10.071] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.071] (**) Option "xkb_model" "pc105"
[ 10.071] (**) Option "xkb_layout" "fr"
[ 10.100] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 10.100] (II) event2 - Power Button: device is a keyboard
[ 10.100] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event8)
[ 10.100] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 10.100] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[ 10.100] (**) Asus Wireless Radio Control: always reports core events
[ 10.100] (**) Option "Device" "/dev/input/event8"
[ 10.100] (**) Option "_source" "server/udev"
[ 10.101] (II) event8 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 10.101] (II) event8 - Asus Wireless Radio Control: device is a keyboard
[ 10.101] (II) event8 - Asus Wireless Radio Control: device removed
[ 10.143] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input8/event8"
[ 10.143] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[ 10.143] (**) Option "xkb_model" "pc105"
[ 10.143] (**) Option "xkb_layout" "fr"
[ 10.144] (II) event8 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 10.144] (II) event8 - Asus Wireless Radio Control: device is a keyboard
[ 10.144] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 10.144] (II) No input driver specified, ignoring this device.
[ 10.144] (II) This device may have been added with another device file.
[ 10.144] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 10.144] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 10.144] (II) Using input driver 'libinput' for 'Sleep Button'
[ 10.144] (**) Sleep Button: always reports core events
[ 10.144] (**) Option "Device" "/dev/input/event1"
[ 10.144] (**) Option "_source" "server/udev"
[ 10.145] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 10.145] (II) event1 - Sleep Button: device is a keyboard
[ 10.145] (II) event1 - Sleep Button: device removed
[ 10.163] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 10.163] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 10.163] (**) Option "xkb_model" "pc105"
[ 10.163] (**) Option "xkb_layout" "fr"
[ 10.164] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 10.164] (II) event1 - Sleep Button: device is a keyboard
[ 10.165] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event6)
[ 10.165] (II) No input driver specified, ignoring this device.
[ 10.165] (II) This device may have been added with another device file.
[ 10.166] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event7)
[ 10.166] (**) 2.4G Mouse: Applying InputClass "libinput pointer catchall"
[ 10.166] (II) Using input driver 'libinput' for '2.4G Mouse'
[ 10.166] (**) 2.4G Mouse: always reports core events
[ 10.166] (**) Option "Device" "/dev/input/event7"
[ 10.166] (**) Option "_source" "server/udev"
[ 10.224] (II) event7 - 2.4G Mouse: is tagged by udev as: Mouse
[ 10.224] (II) event7 - 2.4G Mouse: device is a pointer
[ 10.224] (II) event7 - 2.4G Mouse: device removed
[ 10.255] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1EA7:0064.0002/input/input7/event7"
[ 10.255] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: MOUSE, id 9)
[ 10.255] (**) Option "AccelerationScheme" "none"
[ 10.255] (**) 2.4G Mouse: (accel) selected scheme none/0
[ 10.255] (**) 2.4G Mouse: (accel) acceleration factor: 2.000
[ 10.255] (**) 2.4G Mouse: (accel) acceleration threshold: 4
[ 10.316] (II) event7 - 2.4G Mouse: is tagged by udev as: Mouse
[ 10.316] (II) event7 - 2.4G Mouse: device is a pointer
[ 10.316] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/mouse2)
[ 10.316] (II) No input driver specified, ignoring this device.
[ 10.316] (II) This device may have been added with another device file.
[ 10.317] (II) config/udev: Adding input device USB2.0 HD UVC WebCam: USB2.0 HD (/dev/input/event10)
[ 10.317] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "libinput keyboard catchall"
[ 10.317] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam: USB2.0 HD'
[ 10.317] (**) USB2.0 HD UVC WebCam: USB2.0 HD: always reports core events
[ 10.317] (**) Option "Device" "/dev/input/event10"
[ 10.317] (**) Option "_source" "server/udev"
[ 10.318] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[ 10.318] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[ 10.318] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: device removed
[ 10.343] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input12/event10"
[ 10.343] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam: USB2.0 HD" (type: KEYBOARD, id 10)
[ 10.343] (**) Option "xkb_model" "pc105"
[ 10.343] (**) Option "xkb_layout" "fr"
[ 10.344] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[ 10.344] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[ 10.344] (II) config/udev: Adding input device ELAN1200:00 04F3:3022 Mouse (/dev/input/event5)
[ 10.344] (**) ELAN1200:00 04F3:3022 Mouse: Applying InputClass "libinput pointer catchall"
[ 10.344] (II) Using input driver 'libinput' for 'ELAN1200:00 04F3:3022 Mouse'
[ 10.344] (**) ELAN1200:00 04F3:3022 Mouse: always reports core events
[ 10.344] (**) Option "Device" "/dev/input/event5"
[ 10.344] (**) Option "_source" "server/udev"
[ 10.345] (II) event5 - ELAN1200:00 04F3:3022 Mouse: is tagged by udev as: Mouse Pointingstick
[ 10.346] (II) event5 - ELAN1200:00 04F3:3022 Mouse: device is a pointer
[ 10.346] (II) event5 - ELAN1200:00 04F3:3022 Mouse: device removed
[ 10.379] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1200:00/0018:04F3:3022.0001/input/input10/event5"
[ 10.379] (II) XINPUT: Adding extended input device "ELAN1200:00 04F3:3022 Mouse" (type: MOUSE, id 11)
[ 10.379] (**) Option "AccelerationScheme" "none"
[ 10.379] (**) ELAN1200:00 04F3:3022 Mouse: (accel) selected scheme none/0
[ 10.379] (**) ELAN1200:00 04F3:3022 Mouse: (accel) acceleration factor: 2.000
[ 10.379] (**) ELAN1200:00 04F3:3022 Mouse: (accel) acceleration threshold: 4
[ 10.380] (II) event5 - ELAN1200:00 04F3:3022 Mouse: is tagged by udev as: Mouse Pointingstick
[ 10.380] (II) event5 - ELAN1200:00 04F3:3022 Mouse: device is a pointer
[ 10.381] (II) config/udev: Adding input device ELAN1200:00 04F3:3022 Mouse (/dev/input/mouse0)
[ 10.381] (II) No input driver specified, ignoring this device.
[ 10.381] (II) This device may have been added with another device file.
[ 10.381] (II) config/udev: Adding input device ELAN1200:00 04F3:3022 Touchpad (/dev/input/event9)
[ 10.381] (**) ELAN1200:00 04F3:3022 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 10.381] (II) Using input driver 'libinput' for 'ELAN1200:00 04F3:3022 Touchpad'
[ 10.381] (**) ELAN1200:00 04F3:3022 Touchpad: always reports core events
[ 10.381] (**) Option "Device" "/dev/input/event9"
[ 10.381] (**) Option "_source" "server/udev"
[ 10.382] (II) event9 - ELAN1200:00 04F3:3022 Touchpad: is tagged by udev as: Touchpad
[ 10.383] (II) event9 - ELAN1200:00 04F3:3022 Touchpad: device is a touchpad
[ 10.383] (II) event9 - ELAN1200:00 04F3:3022 Touchpad: device removed
[ 10.419] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1200:00/0018:04F3:3022.0001/input/input11/event9"
[ 10.419] (II) XINPUT: Adding extended input device "ELAN1200:00 04F3:3022 Touchpad" (type: TOUCHPAD, id 12)
[ 10.420] (**) Option "AccelerationScheme" "none"
[ 10.420] (**) ELAN1200:00 04F3:3022 Touchpad: (accel) selected scheme none/0
[ 10.420] (**) ELAN1200:00 04F3:3022 Touchpad: (accel) acceleration factor: 2.000
[ 10.420] (**) ELAN1200:00 04F3:3022 Touchpad: (accel) acceleration threshold: 4
[ 10.421] (II) event9 - ELAN1200:00 04F3:3022 Touchpad: is tagged by udev as: Touchpad
[ 10.422] (II) event9 - ELAN1200:00 04F3:3022 Touchpad: device is a touchpad
[ 10.422] (II) config/udev: Adding input device ELAN1200:00 04F3:3022 Touchpad (/dev/input/mouse1)
[ 10.422] (II) No input driver specified, ignoring this device.
[ 10.422] (II) This device may have been added with another device file.
[ 10.423] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event4)
[ 10.423] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 10.423] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 10.423] (**) Asus WMI hotkeys: always reports core events
[ 10.423] (**) Option "Device" "/dev/input/event4"
[ 10.423] (**) Option "_source" "server/udev"
[ 10.423] (II) event4 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 10.423] (II) event4 - Asus WMI hotkeys: device is a keyboard
[ 10.423] (II) event4 - Asus WMI hotkeys: device removed
[ 10.459] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input9/event4"
[ 10.459] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[ 10.459] (**) Option "xkb_model" "pc105"
[ 10.459] (**) Option "xkb_layout" "fr"
[ 10.459] (II) event4 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 10.459] (II) event4 - Asus WMI hotkeys: device is a keyboard
[ 10.460] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 10.460] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 10.460] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 10.460] (**) AT Translated Set 2 keyboard: always reports core events
[ 10.460] (**) Option "Device" "/dev/input/event3"
[ 10.460] (**) Option "_source" "server/udev"
[ 10.461] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 10.461] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 10.461] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 10.475] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 10.475] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 10.475] (**) Option "xkb_model" "pc105"
[ 10.475] (**) Option "xkb_layout" "fr"
[ 10.476] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 10.476] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 10.485] (EE) Failed to open authorization file "/var/run/sddm/{185ac35c-4ea8-483c-b258-2eb92b89f1c7}": No such file or directory
[ 64.759] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 64.759] (II) No input driver specified, ignoring this device.
[ 64.759] (II) This device may have been added with another device file.
[ 64.761] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 64.761] (II) No input driver specified, ignoring this device.
[ 64.761] (II) This device may have been added with another device file.
[ 91.207] (II) event2 - Power Button: device removed
[ 91.231] (II) event8 - Asus Wireless Radio Control: device removed
[ 91.283] (II) event1 - Sleep Button: device removed
[ 91.300] (II) event7 - 2.4G Mouse: device removed
[ 91.345] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: device removed
[ 91.381] (II) event5 - ELAN1200:00 04F3:3022 Mouse: device removed
[ 91.417] (II) event9 - ELAN1200:00 04F3:3022 Touchpad: device removed
[ 91.448] (II) event4 - Asus WMI hotkeys: device removed
[ 91.481] (II) event3 - AT Translated Set 2 keyboard: device removedEn toute franchise, je n'ai pas d'idée pour aller plus loin, un coup de main serait très apprécié
Bonne soirée
Dernière modification par phleconte (Le 06/02/2022, à 19:15)
HP x360 1040 G8 / station d'accueil
Kubuntu 24.04.1
Kernel 6.8
Hors ligne
#3 Le 07/02/2022, à 21:27
- jajaX
Re : plantage mais fonctionne en mode sans échec
salut,
comme tout Linux, il aime pas s'arrêter de façon intempestive... fait juste un fsck, ça devrait suffire 
@+
jajaX
Asus X93SM-YZ157V / Asus X93SM-YZ065V sous KDE Neon
ASUS K95VB sous Kubuntu 22.04 Jammy Jellyfish (64 bits) / ACER Aspire 5612 WLMI sous Kubuntu 18.04 Bionic Beaver (32 bits)
Hors ligne
#4 Le 07/02/2022, à 22:41
- phleconte
Re : plantage mais fonctionne en mode sans échec
Bonsoir,
merci pour ta réponse, j'avais fait un fsck mais cela n'a rien donné. Je me suis penché sur un message d'erreur apparaissant au début :
firmware Bug] no firmware reserved region can cover this RMRR
[firmware Bug] ACPI region does not cover the response buffer
du coup j'ai cherché sur internet et trouvé un fil sur askubuntu que j'ai tenté d'appliquer mais sans succès. J'ai également posé la question sur le même forum sans réponse... askubuntu
suis toujours perdu même si cela avance,
Si tu as une idée, merci d'avance !
HP x360 1040 G8 / station d'accueil
Kubuntu 24.04.1
Kernel 6.8
Hors ligne
#5 Le 09/02/2022, à 15:11
- jajaX
Re : plantage mais fonctionne en mode sans échec
salut,
cette ligne me surprend
Failed to open authorization file "/var/run/sddm/{185ac35c-4ea8-483c-b258-2eb92b89f1c7}": No such file or directoryessai, en mode dans l'ordre recovery, dans l'ordre :
sudo apt-get update
sudo apt-get dist-upgrade
sudo apt-get install -f
sudo dpkg --configure -a
sudo apt-get autoremoveet redémarre avec un "reboot" !
@+
jajaX
Asus X93SM-YZ157V / Asus X93SM-YZ065V sous KDE Neon
ASUS K95VB sous Kubuntu 22.04 Jammy Jellyfish (64 bits) / ACER Aspire 5612 WLMI sous Kubuntu 18.04 Bionic Beaver (32 bits)
Hors ligne
#6 Le 09/02/2022, à 21:05
- phleconte
Re : plantage mais fonctionne en mode sans échec
Bonsoir,
après avoir appliqué les commandes, la situation n'a pas changé. Je ne sais pas si cela la moindre importance mais je suis obligé d'éteindre le laptop en appuyant le bouton d'alimentation car après le sudo reboot, l'écran s'éteint mais l'ordinateur continue à "marcher"
à suivre !
HP x360 1040 G8 / station d'accueil
Kubuntu 24.04.1
Kernel 6.8
Hors ligne
#7 Le 17/02/2022, à 00:07
- jajaX
Re : plantage mais fonctionne en mode sans échec
hello,
et après redémarrage ?
@+
jajaX
Asus X93SM-YZ157V / Asus X93SM-YZ065V sous KDE Neon
ASUS K95VB sous Kubuntu 22.04 Jammy Jellyfish (64 bits) / ACER Aspire 5612 WLMI sous Kubuntu 18.04 Bionic Beaver (32 bits)
Hors ligne
#8 Le 17/02/2022, à 08:56
- phleconte
Re : plantage mais fonctionne en mode sans échec
Bonjour,
après le redémarrage, aucun changement, toujours la même erreur
firmware Bug] no firmware reserved region can cover this RMRR
[firmware Bug] ACPI region does not cover the response buffer
et l'apparition d'un écran zébré.
Une idée ? merci et bonne journée
HP x360 1040 G8 / station d'accueil
Kubuntu 24.04.1
Kernel 6.8
Hors ligne
#9 Le 17/02/2022, à 09:06
- xubu1957
Re : plantage mais fonctionne en mode sans échec
Bonjour,
Pas de dual-boot avec Windows ?
Vu [Firmware Bug]: ACPI region does not cover the entire command/response buffer
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#10 Le 17/02/2022, à 10:15
- FrancisFDZ
Re : plantage mais fonctionne en mode sans échec
Bonjour,
As-tu essayé de booter sur le noyau précédent ? (option de grub)
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#11 Le 17/02/2022, à 13:41
- phleconte
Re : plantage mais fonctionne en mode sans échec
Bonjour à vous deux,
ben non, pas de double boot Windows, machine uniquement sous Kubuntu. Il doit y avoir un problème sur le Bios car en le démarrant sur des clés USB Linux Mint ou Boot repair, j'ai toujours le même problème et suis obligé d'utiliser le mode sans échec pour que cela marche. J'ai regardé pour mettre le bios à jour mais crains un peu d'avoir des problèmes plus graves.
J'avais tenté de booter sur un noyau précédent sans aucun succès.
Au risque de me répéter, je pense que le problème est sur le bios ou le Grub. Les modifications faites par Boot repair n'ont rien changé
Je n'ai plus vraiment d'idées...
HP x360 1040 G8 / station d'accueil
Kubuntu 24.04.1
Kernel 6.8
Hors ligne
Pages : 1