#26 Le 24/10/2021, à 11:24
- xubu1957
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Bonjour,
> quel-canal-wi-fi-choisir-pour-optimiser-son-debit
> les-dix-ennemis-des-reseaux-wi-fi-
> tomsguide.fr/2018/07/02/wi-fi-comment-ameliorer-la-qualite-de-sa-connexion
Extraits a écrit :
Disposer la box un peu en hauteur
Si vous avez un peu de place à la maison, évitez de cacher la box ou le routeur Wi-Fi tout en bas, derrière le meuble du téléviseur. Surtout, ne la placez pas à même le sol : ce serait une mauvaise idée. Ne la collez pas non plus contre un mur, surtout si l’appareil en question ne dispose d’aucune antenne externe. Placez plutôt la box en hauteur. Il n’est peut-être pas utile de la disposer tout en haut de l’armoire : l’idéal est de mettre la box à environ 1 mètre du sol, sur un petit meuble par exemple. En outre, ne la placez pas « dans » le meuble, mais à l’extérieur. Évitez également de « coller » d’autres appareils électriques tout autour de la box ou du routeur. Enfin, éloignez la box d’éléments métalliques, qui empêchent la propagation des ondes.Mettre la box au centre du domicile
En théorie, la portée maximale du Wi-Fi G est de 100 mètres. En pratique, la plupart des box ADSL ne dépassent guère les 15 mètres en intérieur, dans le meilleur des cas. Même chose pour le Wi-Fi N ou le Wi-Fi AC : sa portée est en théorie de 250 mètres, mais là encore, difficile de dépasser les 20 mètres en intérieur. L’intérêt d’une box est de pouvoir diffuser les ondes Wi-Fi dans tout l’appartement ou la maison, aussi bien à l’horizontale qu’à la verticale. Par conséquent, pour qu’elle soit réellement efficace, placez si possible l’appareil au centre de votre domicile, afin de couvrir un maximum de surface.
_ _ _
Remarque : le branchement sur une multiprise ou une rallonge est déconseillé, car il peut altérer le fonctionnement de votre Livebox.
> assistance.orange.fr/livebox-modem/toutes-les-livebox-et-modems
Dernière modification par xubu1957 (Le 24/10/2021, à 11:27)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#27 Le 24/10/2021, à 11:55
- marie_p19
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Merci pour les infos, je vais regarder ça, possible en effet que ça joue chez nous.
Par contre dernièrement on était dans un gite avec un wifi très stable et accessible et j'ai eu les mêmes soucis de déconnexion régulière (par contre mon conjoint sur ses appareils non).
Hors ligne
#28 Le 24/10/2021, à 12:28
- marie_p19
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
re,
il y a eu une déconnexion assez rapide, je pense que j'ai réussi à faire tourner la ligne de code quand c'était déconnecté :
sophie@sophie-Aspire-A315-54K:~$ dmesg | tail -40
[ 5080.724235] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 5080.756001] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 5080.757413] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 5080.758723] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 5080.760100] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 5085.425687] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 5085.477214] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 5085.478972] wlp2s0: authenticated
[ 5085.480702] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 5085.484997] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 5085.487087] wlp2s0: associated
[ 5085.487187] ath: EEPROM regdomain: 0x80fa
[ 5085.487189] ath: EEPROM indicates we should expect a country code
[ 5085.487190] ath: doing EEPROM country->regdmn map search
[ 5085.487190] ath: country maps to regdmn code: 0x37
[ 5085.487191] ath: Country alpha2 being used: FR
[ 5085.487192] ath: Regpair used: 0x37
[ 5085.487193] ath: regdomain 0x80fa dynamically updated by country element
[ 5085.493014] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 5161.005501] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 5161.037307] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 5161.038722] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 5161.040044] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 5161.041650] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 5165.758264] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 5165.813017] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 5165.818005] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 2/3)
[ 5165.822969] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 3/3)
[ 5165.842595] wlp2s0: authenticated
[ 5165.843310] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 5165.859286] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 2/3)
[ 5165.897011] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 5165.900147] wlp2s0: associated
[ 5165.900441] ath: EEPROM regdomain: 0x80fa
[ 5165.900447] ath: EEPROM indicates we should expect a country code
[ 5165.900450] ath: doing EEPROM country->regdmn map search
[ 5165.900453] ath: country maps to regdmn code: 0x37
[ 5165.900456] ath: Country alpha2 being used: FR
[ 5165.900460] ath: Regpair used: 0x37
[ 5165.900463] ath: regdomain 0x80fa dynamically updated by country element
sophie@sophie-Aspire-A315-54K:~$Hors ligne
#29 Le 24/10/2021, à 13:17
- marie_p19
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
là ça a planté pendant bien 5 minutes donc j'ai refait tourner au cas où (apparemment il y a un peu plus de choses au début de la sortie) :
sophie@sophie-Aspire-A315-54K:~$ dmesg | tail -40
[ 7280.440372] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 7280.440375] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440384] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 7280.440388] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 7280.440397] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 7280.440400] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 7280.440410] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 7280.480148] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 7285.372280] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 7285.406495] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 7285.411384] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 2/3)
[ 7285.416122] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 3/3)
[ 7285.420850] wlp2s0: authentication with a4:3e:51:bd:9a:a6 timed out
[ 7285.702224] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 7285.733819] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 7285.735341] wlp2s0: authenticated
[ 7285.739823] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 1/3)
[ 7285.743571] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 2/3)
[ 7285.747400] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 3/3)
[ 7285.751017] wlp2s0: association with a4:3e:51:bd:9a:ab timed out
[ 7290.401424] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 7290.436120] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 7290.437816] wlp2s0: authenticated
[ 7290.442079] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 7290.446430] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 7290.449089] wlp2s0: associated
[ 7290.449646] ath: EEPROM regdomain: 0x80fa
[ 7290.449653] ath: EEPROM indicates we should expect a country code
[ 7290.449656] ath: doing EEPROM country->regdmn map search
[ 7290.449668] ath: country maps to regdmn code: 0x37
[ 7290.449671] ath: Country alpha2 being used: FR
[ 7290.449674] ath: Regpair used: 0x37
[ 7290.449677] ath: regdomain 0x80fa dynamically updated by country element
[ 7290.459589] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 7290.462049] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 7779.374660] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 7779.406477] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 7779.407808] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 7779.409108] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 7779.410417] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
sophie@sophie-Aspire-A315-54K:~$ Hors ligne
#30 Le 24/10/2021, à 13:28
- xubu1957
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Vu :
[ 7280.440372] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 7280.440375] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440384] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 7280.440388] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 7280.440397] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 7280.440400] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 7280.440410] pcieport 0000:00:1c.5: AER: can't find device of ID00e5et > Erreur PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e, montre aussi :
lspciConseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#31 Le 24/10/2021, à 13:50
- marie_p19
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
voilà (actuellement c'est connecté)
sophie@sophie-Aspire-A315-54K:~$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point LPC Controller/eSPI Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)
03:00.0 Non-Volatile memory controller: Sandisk Corp WD Black 2018/PC SN520 NVMe SSD (rev 01)
sophie@sophie-Aspire-A315-54K:~$ Hors ligne
#32 Le 24/10/2021, à 14:21
- NicoApi73
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Il faut la commande lshw pour savoir quel est le périphérique qui génère des erreurs AER :
sudo lshwl'ath10k génére quelques erreurs AER sur certaines machines. Je ne pense pas que ce soit bien grave. Pour moi, le problème ne vient peut être pas de la machine, mais de la liaison avec la box. As tu la possibilité d'utiliser une autre box pour faire l'essai, ou un téléphone configuré en point d'accès WiFi?
Hors ligne
#33 Le 24/10/2021, à 14:33
- marie_p19
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
je dois faire tourner cette commande n'importe quand ou seulement quand c'est planté ?
sinon j'ai eu l'occasion de tester récemment dans un gîte qui avait une bonne wifi et ça se déconnectait aussi de temps en temps. Si absolument nécessaire je testerai avec le wifi de mon téléphone mais il est vraiment puissant et ça me file une migraine pas possible au bout d'un moment, or comme c'est aléatoire pour tester je serai obligée de le laisser branché un bon moment.
Hors ligne
#34 Le 24/10/2021, à 14:36
- nany
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Bonjour,
NicoApi73 a écrit :
sudo lshw
sudo lshw -sanitize
En ligne
#35 Le 24/10/2021, à 15:07
- NicoApi73
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
marie_p19 a écrit :
je dois faire tourner cette commande n'importe quand ou seulement quand c'est planté ?
N'importe quand, ça liste le matériel de ta machine.
Tu es connecté en 5GHz, tu as aussi le 2.4GHz, tu peux essayer sur cette fréquence, pour voir si ça change quelque chose.
Hors ligne
#36 Le 24/10/2021, à 15:51
- marie_p19
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
ok voilà la sortie
sophie@sophie-Aspire-A315-54K:~$ sudo lshw
[sudo] Mot de passe de sophie :
sophie-aspire-a315-54k
description: Ordinateur Bloc-notes
produit: Aspire A315-54K (0000000000000000)
fabricant: Acer
version: V1.09
numéro de série: NXHEEEF02P023099C33400
bits: 64 bits
fonctionnalités: smbios-3.0.0 dmi-3.0.0 smp vsyscall32
configuration : chassis=notebook family=Aspire 3 sku=0000000000000000 uuid=65E4587A-9FDF-11EA-80D6-089798A1EA5A
*-core
description: Carte mère
produit: Sleepy_KL
fabricant: KBL
identifiant matériel: 0
version: V1.09
numéro de série: NBHR811001023217133400
emplacement: Type2 - Board Chassis Location
*-firmware
description: BIOS
fabricant: Insyde Corp.
identifiant matériel: 0
version: V1.09
date: 04/01/2020
taille: 128KiB
capacité: 8MiB
fonctionnalités: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification uefi
*-cpu
description: CPU
produit: Intel(R) Core(TM) i3-8130U CPU @ 2.20GHz
fabricant: Intel Corp.
identifiant matériel: 4
information bus: cpu@0
version: Intel(R) Core(TM) i3-8130U CPU @ 2.20GHz
numéro de série: To Be Filled By O.E.M.
emplacement: U3E1
taille: 1840MHz
capacité: 4005MHz
bits: 64 bits
horloge: 100MHz
fonctionnalités: lm fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp md_clear flush_l1d cpufreq
configuration : cores=2 enabledcores=2 threads=4
*-cache:0
description: L1 cache
identifiant matériel: 5
emplacement: L1 Cache
taille: 128KiB
capacité: 128KiB
fonctionnalités: synchronous internal write-back unified
configuration : level=1
*-cache:1
description: L2 cache
identifiant matériel: 6
emplacement: L2 Cache
taille: 512KiB
capacité: 512KiB
fonctionnalités: synchronous internal write-back unified
configuration : level=2
*-cache:2
description: L3 cache
identifiant matériel: 7
emplacement: L3 Cache
taille: 4MiB
capacité: 4MiB
fonctionnalités: synchronous internal write-back unified
configuration : level=3
*-memory
description: Mémoire Système
identifiant matériel: e
emplacement: Carte mère
taille: 4GiB
*-bank:0
description: SODIMM DDR4 Synchrone Unbuffered (Unregistered) 2400 MHz (0,4 ns)
produit: 4ATF51264HZ-2G6E1
fabricant: Micron
identifiant matériel: 0
numéro de série: 00000000
emplacement: ChannelA-DIMM0
taille: 4GiB
bits: 64 bits
horloge: 2400MHz (0.4ns)
*-bank:1
description: Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2021-01-19 19:00+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-08-02 16:47+0000X-Generator: Launchpad (build 8bd362bf86c4b35e805f897f03c203e3576a7006)Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2021-01-19 19:00+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-08-02 16:47+0000X-Generator: Launchpad (build 8bd362bf86c4b35e805f897f03c203e3576a7006) [vide]
identifiant matériel: 1
emplacement: ChannelB-DIMM0
*-pci
description: Host bridge
produit: Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers
fabricant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 08
bits: 32 bits
horloge: 33MHz
configuration : driver=skl_uncore
ressources : irq:0
*-display
description: VGA compatible controller
produit: UHD Graphics 620
fabricant: Intel Corporation
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 07
bits: 64 bits
horloge: 33MHz
fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list rom
configuration : driver=i915 latency=0
ressources : irq:136 mémoire:b0000000-b0ffffff mémoire:a0000000-afffffff portE/S:4000(taille=64) mémoire:c0000-dffff
*-usb
description: USB controller
produit: Sunrise Point-LP USB 3.0 xHCI Controller
fabricant: Intel Corporation
identifiant matériel: 14
information bus: pci@0000:00:14.0
version: 21
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi xhci cap_list
configuration : driver=xhci_hcd latency=0
ressources : irq:125 mémoire:b1410000-b141ffff
*-usbhost:0
produit: xHCI Host Controller
fabricant: Linux 5.11.0-38-generic xhci-hcd
identifiant matériel: 0
information bus: usb@1
nom logique: usb1
version: 5.11
fonctionnalités: usb-2.00
configuration : driver=hub slots=12 speed=480Mbit/s
*-usb:0
description: Interface sans fil Bluetooth
produit: Qualcomm Atheros QCA9377 Bluetooth
fabricant: Lite-On Technology Corp.
identifiant matériel: 5
information bus: usb@1:5
version: 0.01
fonctionnalités: bluetooth usb-2.01
configuration : driver=btusb maxpower=100mA speed=12Mbit/s
*-usb:1
description: Vidéo
produit: VGA WebCam
fabricant: Quanta
identifiant matériel: 7
information bus: usb@1:7
version: 0.06
numéro de série: 0x0001
fonctionnalités: usb-2.00
configuration : driver=uvcvideo maxpower=500mA speed=480Mbit/s
*-usbhost:1
produit: xHCI Host Controller
fabricant: Linux 5.11.0-38-generic xhci-hcd
identifiant matériel: 1
information bus: usb@2
nom logique: usb2
version: 5.11
fonctionnalités: usb-3.00
configuration : driver=hub slots=6 speed=5000Mbit/s
*-generic:0
description: Signal processing controller
produit: Sunrise Point-LP Serial IO I2C Controller #0
fabricant: Intel Corporation
identifiant matériel: 15
information bus: pci@0000:00:15.0
version: 21
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration : driver=intel-lpss latency=0
ressources : irq:16 mémoire:b142a000-b142afff
*-generic:1
description: Signal processing controller
produit: Sunrise Point-LP Serial IO I2C Controller #1
fabricant: Intel Corporation
identifiant matériel: 15.1
information bus: pci@0000:00:15.1
version: 21
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration : driver=intel-lpss latency=0
ressources : irq:17 mémoire:b142b000-b142bfff
*-communication
description: Communication controller
produit: Sunrise Point-LP CSME HECI #1
fabricant: Intel Corporation
identifiant matériel: 16
information bus: pci@0000:00:16.0
version: 21
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration : driver=mei_me latency=0
ressources : irq:129 mémoire:b142c000-b142cfff
*-sata
description: SATA controller
produit: Sunrise Point-LP SATA Controller [AHCI mode]
fabricant: Intel Corporation
identifiant matériel: 17
information bus: pci@0000:00:17.0
version: 21
bits: 32 bits
horloge: 66MHz
fonctionnalités: sata msi pm ahci_1.0 bus_master cap_list
configuration : driver=ahci latency=0
ressources : irq:126 mémoire:b1428000-b1429fff mémoire:b142f000-b142f0ff portE/S:4080(taille=8) portE/S:4088(taille=4) portE/S:4060(taille=32) mémoire:b142d000-b142d7ff
*-pci:0
description: PCI bridge
produit: Sunrise Point-LP PCI Express Root Port #5
fabricant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: f1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration : driver=pcieport
ressources : irq:122 portE/S:3000(taille=4096) mémoire:b1300000-b13fffff
*-network
description: Ethernet interface
produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
fabricant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:01:00.0
nom logique: enp1s0
version: 15
numéro de série: 08:97:98:a1:ea:5a
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration : autonegotiation=on broadcast=yes driver=r8169 driverversion=5.11.0-38-generic firmware=rtl8168h-2_0.0.2 02/26/15 latency=0 link=no multicast=yes port=twisted pair
ressources : irq:16 portE/S:3000(taille=256) mémoire:b1304000-b1304fff mémoire:b1300000-b1303fff
*-pci:1
description: PCI bridge
produit: Sunrise Point-LP PCI Express Root Port #6
fabricant: Intel Corporation
identifiant matériel: 1c.5
information bus: pci@0000:00:1c.5
version: f1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration : driver=pcieport
ressources : irq:123 mémoire:b1000000-b11fffff
*-network
description: Interface réseau sans fil
produit: QCA9377 802.11ac Wireless Network Adapter
fabricant: Qualcomm Atheros
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: wlp2s0
version: 31
numéro de série: 80:30:49:12:83:df
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration : broadcast=yes driver=ath10k_pci driverversion=5.11.0-38-generic firmware=WLAN.TF.2.1-00021-QCARMSWP-1 ip=192.168.1.20 latency=0 link=yes multicast=yes wireless=IEEE 802.11
ressources : irq:135 mémoire:b1000000-b11fffff
*-pci:2
description: PCI bridge
produit: Sunrise Point-LP PCI Express Root Port #9
fabricant: Intel Corporation
identifiant matériel: 1d
information bus: pci@0000:00:1d.0
version: f1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration : driver=pcieport
ressources : irq:124 mémoire:b1200000-b12fffff
*-storage
description: Non-Volatile memory controller
produit: WD Black 2018/PC SN520 NVMe SSD
fabricant: Sandisk Corp
identifiant matériel: 0
information bus: pci@0000:03:00.0
version: 01
bits: 64 bits
horloge: 33MHz
fonctionnalités: storage pm msi msix pciexpress nvm_express bus_master cap_list
configuration : driver=nvme latency=0
ressources : irq:16 mémoire:b1200000-b1203fff
*-nvme0
description: NVMe device
produit: WDC PC SN520 SDAPNUW-256G-1014
identifiant matériel: 0
nom logique: /dev/nvme0
version: 20110000
numéro de série: 2011A2804834
configuration : nqn=nqn.2018-01.com.wdc:nguid:E8238FA6BF53-0001-001B448B46C32CC5 state=live
*-namespace
description: NVMe namespace
identifiant matériel: 1
nom logique: /dev/nvme0n1
taille: 238GiB (256GB)
fonctionnalités: gpt-1.00 partitioned partitioned:gpt
configuration : guid=07a1b033-0d46-49e3-80de-e3e213498541 logicalsectorsize=512 sectorsize=512
*-volume:0
description: Windows FAT volume
fabricant: MSDOS5.0
identifiant matériel: 1
nom logique: /dev/nvme0n1p1
nom logique: /boot/efi
version: FAT32
numéro de série: f607-ad66
taille: 95MiB
capacité: 99MiB
fonctionnalités: boot fat initialized
configuration : FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro name=EFI system partition state=mounted
*-volume:1
description: reserved partition
fabricant: Windows
identifiant matériel: 2
nom logique: /dev/nvme0n1p2
numéro de série: 95e977fd-018c-4da7-979d-3dc0be14b51c
capacité: 15MiB
fonctionnalités: nofs
configuration : name=Microsoft reserved partition
*-volume:2
description: Windows NTFS volume
fabricant: Windows
identifiant matériel: 3
nom logique: /dev/nvme0n1p3
version: 3.1
numéro de série: 543e43a3-c4f5-d943-9393-587a58c4df9a
taille: 123GiB
capacité: 123GiB
fonctionnalités: ntfs initialized
configuration : clustersize=4096 created=2020-10-06 11:42:40 filesystem=ntfs name=Basic data partition state=clean
*-volume:3
description: Windows NTFS volume
fabricant: Windows
identifiant matériel: 4
nom logique: /dev/nvme0n1p4
version: 3.1
numéro de série: 961e-1a5c
taille: 488MiB
capacité: 518MiB
fonctionnalités: boot precious ntfs initialized
configuration : clustersize=4096 created=2020-10-06 10:46:01 filesystem=ntfs state=clean
*-volume:4
description: Volume EXT4
fabricant: Linux
identifiant matériel: 5
nom logique: /dev/nvme0n1p5
nom logique: /
version: 1.0
numéro de série: 8eeae8aa-6d16-4413-b005-6f1c07bc8be4
taille: 114GiB
fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
configuration : created=2020-10-06 11:16:52 filesystem=ext4 lastmountpoint=/ modified=2021-10-24 11:44:17 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro mounted=2021-10-24 11:44:17 state=mounted
*-isa
description: ISA bridge
produit: Sunrise Point LPC Controller/eSPI Controller
fabricant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 21
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master
configuration : latency=0
*-memory NON-RÉCLAMÉ
description: Memory controller
produit: Sunrise Point-LP PMC
fabricant: Intel Corporation
identifiant matériel: 1f.2
information bus: pci@0000:00:1f.2
version: 21
bits: 32 bits
horloge: 33MHz (30.3ns)
fonctionnalités: bus_master
configuration : latency=0
ressources : mémoire:b1424000-b1427fff
*-multimedia
description: Audio device
produit: Sunrise Point-LP HD Audio
fabricant: Intel Corporation
identifiant matériel: 1f.3
information bus: pci@0000:00:1f.3
version: 21
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration : driver=snd_hda_intel latency=32
ressources : irq:131 mémoire:b1420000-b1423fff mémoire:b1400000-b140ffff
*-serial
description: SMBus
produit: Sunrise Point-LP SMBus
fabricant: Intel Corporation
identifiant matériel: 1f.4
information bus: pci@0000:00:1f.4
version: 21
bits: 64 bits
horloge: 33MHz
configuration : driver=i801_smbus latency=0
ressources : irq:16 mémoire:b142e000-b142e0ff portE/S:4040(taille=32)
*-pnp00:00
produit: PnP device PNP0c02
identifiant matériel: 1
fonctionnalités: pnp
configuration : driver=system
*-pnp00:01
produit: PnP device PNP0c02
identifiant matériel: 2
fonctionnalités: pnp
configuration : driver=system
*-pnp00:02
produit: PnP device PNP0c02
identifiant matériel: 3
fonctionnalités: pnp
configuration : driver=system
*-pnp00:03
produit: PnP device PNP0c02
identifiant matériel: 5
fonctionnalités: pnp
configuration : driver=system
*-pnp00:04
produit: PnP device PNP0b00
identifiant matériel: 6
fonctionnalités: pnp
configuration : driver=rtc_cmos
*-pnp00:05
produit: PnP device INT3f0d
identifiant matériel: 7
fonctionnalités: pnp
configuration : driver=system
*-pnp00:06
produit: PnP device PNP0303
identifiant matériel: 8
fonctionnalités: pnp
configuration : driver=i8042 kbd
*-pnp00:07
produit: PnP device PNP0c02
identifiant matériel: 9
fonctionnalités: pnp
configuration : driver=system
*-pnp00:08
produit: PnP device PNP0c02
identifiant matériel: a
fonctionnalités: pnp
configuration : driver=system
sophie@sophie-Aspire-A315-54K:~$ je vais essayer de voir pour le 2.4GHz, je suppose que c'est dans les paramètres de connexion à ma box
Hors ligne
#37 Le 24/10/2021, à 15:59
- marie_p19
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
PS : je viens de vérifier, apparemment je suis connectée en 2.4GHz présentement. (dans les paramètres de la box sur mon ordi, premier onglet, ça m'indique "Vitesse de connexion : 1 Mb/s (2,4 GHz)")
Sais pas si c'est normal que dans les sorties ça indique 5GHz et que là ça soit marqué 2.4 ?
Hors ligne
#38 Le 24/10/2021, à 16:08
- xubu1957
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Montre :
sudo dmesg | grep -Ei 'error|fail|firm|deauth|qos|crda|regdom|cfg80211|alpha2|wl|blue' | grep -viE 'acpi|ras|nvidia|eth'piqué dans > forum.garudalinux.org/t/qca9377-no-wifi-networks
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#39 Le 24/10/2021, à 16:10
- marie_p19
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
[ 0.082690] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.650346] integrity: Error adding keys to platform keyring UEFI:db
[ 0.650349] integrity: Error adding keys to platform keyring UEFI:db
[ 1.963722] EXT4-fs (nvme0n1p5): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ 2.517655] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.517844] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.557370] Bluetooth: Core ver 2.22
[ 2.557390] Bluetooth: HCI device and connection manager initialized
[ 2.557394] Bluetooth: HCI socket layer initialized
[ 2.557396] Bluetooth: L2CAP socket layer initialized
[ 2.557399] Bluetooth: SCO socket layer initialized
[ 2.623931] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 2.623933] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 2.749823] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 2.888665] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 2.888678] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 2.888681] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 2.888690] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 2.888699] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 2.888733] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 2.888737] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 2.888746] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 2.888755] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 2.888763] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 2.888770] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 2.888778] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 2.888785] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 2.888792] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 2.888800] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 2.888807] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 2.979892] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 2.995045] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
[ 3.328429] ath: EEPROM regdomain: 0x69
[ 3.328435] ath: Country alpha2 being used: 00
[ 3.334157] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[ 5.143982] Bluetooth: BNEP filters: protocol multicast
[ 5.143987] Bluetooth: BNEP socket layer initialized
[ 5.629429] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.629440] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 5.629442] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 5.629450] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.629457] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.629463] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666164] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666177] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 5.666179] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 5.666188] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666216] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 5.666217] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 5.666226] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666234] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666241] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666249] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666256] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666263] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666270] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666277] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666284] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666290] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666297] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666304] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666311] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 5.666317] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 5.666325] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 6.402470] Bluetooth: RFCOMM TTY layer initialized
[ 6.402477] Bluetooth: RFCOMM socket layer initialized
[ 6.402482] Bluetooth: RFCOMM ver 1.11
[ 10.621140] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 10.652807] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 10.654526] wlp2s0: authenticated
[ 10.660302] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 10.664588] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 10.666701] wlp2s0: associated
[ 10.666780] ath: EEPROM regdomain: 0x80fa
[ 10.666785] ath: Country alpha2 being used: FR
[ 10.666787] ath: regdomain 0x80fa dynamically updated by country element
[ 10.704360] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 10.731541] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 47.344038] wlp2s0: disconnect from AP a4:3e:51:bd:9a:a6 for new auth to a4:3e:51:bd:9a:ab
[ 47.351616] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 47.380456] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 47.383869] wlp2s0: authenticated
[ 47.388240] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 1/3)
[ 47.391500] wlp2s0: RX ReassocResp from a4:3e:51:bd:9a:ab (capab=0x1511 status=0 aid=41)
[ 47.393744] wlp2s0: associated
[ 47.393823] ath: EEPROM regdomain: 0x80fa
[ 47.393828] ath: Country alpha2 being used: FR
[ 47.393830] ath: regdomain 0x80fa dynamically updated by country element
[ 47.492794] wlp2s0: Limiting TX power to 26 (26 - 0) dBm as advertised by a4:3e:51:bd:9a:ab
[ 70.006117] wlp2s0: deauthenticated from a4:3e:51:bd:9a:ab (Reason: 12=<unknown>)
[ 70.239058] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 70.271017] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 70.272903] wlp2s0: authenticated
[ 70.280601] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 70.284689] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 70.286692] wlp2s0: associated
[ 70.286789] ath: EEPROM regdomain: 0x80fa
[ 70.286794] ath: Country alpha2 being used: FR
[ 70.286796] ath: regdomain 0x80fa dynamically updated by country element
[ 70.326155] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 506.359826] wlp2s0: deauthenticating from a4:3e:51:bd:9a:a6 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 512.463393] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 512.463396] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 512.742462] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.742489] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 512.742498] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 512.742525] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778340] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778353] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 512.778355] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 512.778367] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778396] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 512.778398] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 512.778405] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778413] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778419] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778426] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778433] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778440] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778446] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 512.778453] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778460] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778467] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778473] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778480] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778487] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778494] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778501] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 512.778507] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 512.818410] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 545.019137] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 545.050921] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 545.052497] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 545.053958] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 545.055570] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 549.719487] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 549.754604] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 549.756342] wlp2s0: authenticated
[ 549.758019] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 549.773354] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 2/3)
[ 549.775092] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 549.778106] wlp2s0: associated
[ 549.778370] ath: EEPROM regdomain: 0x80fa
[ 549.778390] ath: Country alpha2 being used: FR
[ 549.778397] ath: regdomain 0x80fa dynamically updated by country element
[ 549.853722] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 550.803772] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 664.057604] wlp2s0: disconnect from AP a4:3e:51:bd:9a:a6 for new auth to a4:3e:51:bd:9a:ab
[ 664.065315] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 664.096847] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 664.098215] wlp2s0: authenticated
[ 664.101499] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 1/3)
[ 664.104925] wlp2s0: RX ReassocResp from a4:3e:51:bd:9a:ab (capab=0x1511 status=0 aid=42)
[ 664.110835] wlp2s0: associated
[ 664.111136] ath: EEPROM regdomain: 0x80fa
[ 664.111153] ath: Country alpha2 being used: FR
[ 664.111161] ath: regdomain 0x80fa dynamically updated by country element
[ 664.151756] wlp2s0: Limiting TX power to 26 (26 - 0) dBm as advertised by a4:3e:51:bd:9a:ab
[ 1129.996090] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 1130.031132] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 1130.032831] wlp2s0: authenticated
[ 1130.035830] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 1130.040867] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 1130.043588] wlp2s0: associated
[ 1130.043955] ath: EEPROM regdomain: 0x80fa
[ 1130.043975] ath: Country alpha2 being used: FR
[ 1130.043981] ath: regdomain 0x80fa dynamically updated by country element
[ 1130.159793] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 5080.412781] wlp2s0: Connection to AP a4:3e:51:bd:9a:a6 lost
[ 5080.724235] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 5080.756001] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 5080.757413] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 5080.758723] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 5080.760100] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 5085.425687] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 5085.477214] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 5085.478972] wlp2s0: authenticated
[ 5085.480702] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 5085.484997] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 5085.487087] wlp2s0: associated
[ 5085.487187] ath: EEPROM regdomain: 0x80fa
[ 5085.487191] ath: Country alpha2 being used: FR
[ 5085.487193] ath: regdomain 0x80fa dynamically updated by country element
[ 5085.493014] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 5161.005501] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 5161.037307] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 5161.038722] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 5161.040044] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 5161.041650] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 5165.758264] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 5165.813017] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 5165.818005] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 2/3)
[ 5165.822969] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 3/3)
[ 5165.842595] wlp2s0: authenticated
[ 5165.843310] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 5165.859286] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 2/3)
[ 5165.897011] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 5165.900147] wlp2s0: associated
[ 5165.900441] ath: EEPROM regdomain: 0x80fa
[ 5165.900456] ath: Country alpha2 being used: FR
[ 5165.900463] ath: regdomain 0x80fa dynamically updated by country element
[ 5170.383133] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 5170.892336] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 5224.800893] wlp2s0: Connection to AP a4:3e:51:bd:9a:a6 lost
[ 5225.122534] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 5225.154510] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 5225.156040] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 5225.157758] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 5225.159033] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 5229.830890] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 5229.882528] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 5229.884232] wlp2s0: authenticated
[ 5229.884974] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 5229.891318] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 5229.893727] wlp2s0: associated
[ 5229.893817] ath: EEPROM regdomain: 0x80fa
[ 5229.893821] ath: Country alpha2 being used: FR
[ 5229.893823] ath: regdomain 0x80fa dynamically updated by country element
[ 5229.980552] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 6135.910263] wlp2s0: Connection to AP a4:3e:51:bd:9a:a6 lost
[ 6136.222229] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 6136.253720] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 6136.255137] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 6136.256554] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 6136.257886] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 6140.915931] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 6140.946606] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 6140.948215] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 6140.949557] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 6140.951008] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 6146.507728] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 6146.539246] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 6146.540661] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 6146.542255] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 6146.543567] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 6155.488104] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 6155.542351] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 6155.544068] wlp2s0: authenticated
[ 6155.546143] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 6155.550495] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 6155.553073] wlp2s0: associated
[ 6155.553366] ath: EEPROM regdomain: 0x80fa
[ 6155.553385] ath: Country alpha2 being used: FR
[ 6155.553393] ath: regdomain 0x80fa dynamically updated by country element
[ 6155.566716] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 6155.580684] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 6908.000527] wlp2s0: Connection to AP a4:3e:51:bd:9a:a6 lost
[ 6908.304849] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 6908.336269] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 6908.337605] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 6908.338901] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 6908.340637] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 6922.540357] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 6922.595110] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 6922.600484] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 2/3)
[ 6922.605360] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 3/3)
[ 6922.610192] wlp2s0: authentication with a4:3e:51:bd:9a:a6 timed out
[ 6923.795847] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 6923.830606] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 6923.834114] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 6923.836257] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 6923.837742] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 6942.528873] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 6942.560626] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 6942.561915] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 6942.563288] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 6942.564538] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 6957.157424] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 6957.188035] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 6957.189655] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 6957.191364] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 6957.192587] wlp2s0: authenticated
[ 6957.196140] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 1/3)
[ 6957.199652] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 2/3)
[ 6957.203235] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 3/3)
[ 6957.206765] wlp2s0: association with a4:3e:51:bd:9a:ab timed out
[ 6981.293432] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 6981.348360] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 6981.350044] wlp2s0: authenticated
[ 6981.351939] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 6981.360466] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 6981.362920] wlp2s0: associated
[ 6981.363015] ath: EEPROM regdomain: 0x80fa
[ 6981.363019] ath: Country alpha2 being used: FR
[ 6981.363021] ath: regdomain 0x80fa dynamically updated by country element
[ 6981.373438] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 6981.442289] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 7274.640555] wlp2s0: deauthenticating from a4:3e:51:bd:9a:a6 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7280.124277] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 7280.124282] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 7280.404472] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.404492] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7280.404498] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 7280.404517] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440246] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440297] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7280.440303] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 7280.440321] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440336] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440349] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440362] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440375] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440388] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 7280.440400] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 7280.480148] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 7285.372280] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 7285.406495] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 7285.411384] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 2/3)
[ 7285.416122] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 3/3)
[ 7285.420850] wlp2s0: authentication with a4:3e:51:bd:9a:a6 timed out
[ 7285.702224] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 7285.733819] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 7285.735341] wlp2s0: authenticated
[ 7285.739823] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 1/3)
[ 7285.743571] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 2/3)
[ 7285.747400] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 3/3)
[ 7285.751017] wlp2s0: association with a4:3e:51:bd:9a:ab timed out
[ 7290.401424] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 7290.436120] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 7290.437816] wlp2s0: authenticated
[ 7290.442079] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 7290.446430] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 7290.449089] wlp2s0: associated
[ 7290.449646] ath: EEPROM regdomain: 0x80fa
[ 7290.449671] ath: Country alpha2 being used: FR
[ 7290.449677] ath: regdomain 0x80fa dynamically updated by country element
[ 7290.459589] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 7290.462049] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 7779.374660] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 7779.406477] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 7779.407808] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 7779.409108] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 7779.410417] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 7996.383314] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 7996.413929] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 7996.415595] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 7996.417103] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 7996.418495] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 8011.513399] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 8011.545035] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 8011.546357] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 8011.547694] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 8011.548894] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 8026.394132] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 8026.429162] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 8026.430902] wlp2s0: authenticated
[ 8026.435017] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 8026.443580] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 8026.446114] wlp2s0: associated
[ 8026.446423] ath: EEPROM regdomain: 0x80fa
[ 8026.446438] ath: Country alpha2 being used: FR
[ 8026.446445] ath: regdomain 0x80fa dynamically updated by country element
[ 8026.462293] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 8026.515895] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 8036.194950] wlp2s0: Connection to AP a4:3e:51:bd:9a:a6 lost
[ 8036.569145] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 8036.600817] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 8036.602141] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 8036.603526] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 8036.604837] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 8041.269380] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 8041.304063] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 8041.308874] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 2/3)
[ 8041.313750] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 3/3)
[ 8041.318681] wlp2s0: authentication with a4:3e:51:bd:9a:a6 timed out
[ 8056.604065] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 8056.637918] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 8056.639604] wlp2s0: authenticated
[ 8056.642808] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 8056.647053] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 8056.649130] wlp2s0: associated
[ 8056.649245] ath: EEPROM regdomain: 0x80fa
[ 8056.649250] ath: Country alpha2 being used: FR
[ 8056.649252] ath: regdomain 0x80fa dynamically updated by country element
[ 8056.661833] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 8056.726059] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 8082.534750] wlp2s0: Connection to AP a4:3e:51:bd:9a:a6 lost
[ 8096.776855] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 8096.810684] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 8096.812342] wlp2s0: authenticated
[ 8096.814595] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 8096.818841] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 8096.820836] wlp2s0: associated
[ 8096.821735] ath: EEPROM regdomain: 0x80fa
[ 8096.821742] ath: Country alpha2 being used: FR
[ 8096.821743] ath: regdomain 0x80fa dynamically updated by country element
[ 8096.865247] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 8922.222284] wlp2s0: deauthenticating from a4:3e:51:bd:9a:a6 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8928.096447] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 8928.096450] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 8928.364777] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.364803] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 8928.364812] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 8928.364837] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.404601] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.404665] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
[ 8928.404673] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00001001/00002000
[ 8928.404706] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.404726] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.404745] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.404762] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.404779] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.404798] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 8928.404816] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 8928.451840] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 8933.393718] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 8933.428055] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 8933.429829] wlp2s0: authenticated
[ 8933.432251] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 8933.436691] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 8933.439211] wlp2s0: associated
[ 8933.439392] ath: EEPROM regdomain: 0x80fa
[ 8933.439401] ath: Country alpha2 being used: FR
[ 8933.439406] ath: regdomain 0x80fa dynamically updated by country element
[ 8933.456047] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 8933.526290] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 8970.049004] wlp2s0: disconnect from AP a4:3e:51:bd:9a:a6 for new auth to a4:3e:51:bd:9a:ab
[ 8970.055106] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 8970.086541] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 8970.088114] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 8970.089454] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 8970.090719] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 8970.264748] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 8970.299445] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 8970.301750] wlp2s0: authenticated
[ 8970.304390] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 8970.310469] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 8970.312775] wlp2s0: associated
[ 8970.312898] ath: EEPROM regdomain: 0x80fa
[ 8970.312903] ath: Country alpha2 being used: FR
[ 8970.312904] ath: regdomain 0x80fa dynamically updated by country element
[ 8970.595568] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[10235.281443] wlp2s0: deauthenticating from a4:3e:51:bd:9a:a6 by local choice (Reason: 3=DEAUTH_LEAVING)
[10241.156187] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[10241.156190] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[10241.451869] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[10241.451898] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[10241.451907] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[10241.451934] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[10241.485590] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[10241.485632] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[10241.485637] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[10241.485647] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[10241.485654] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[10241.485662] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[10241.485668] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[10241.485675] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[10241.509313] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[10246.504090] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[10246.538602] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[10246.540291] wlp2s0: authenticated
[10246.545148] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[10246.549508] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[10246.552254] wlp2s0: associated
[10246.552480] ath: EEPROM regdomain: 0x80fa
[10246.552497] ath: Country alpha2 being used: FR
[10246.552505] ath: regdomain 0x80fa dynamically updated by country element
[10246.563592] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[10246.571462] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[11099.894248] wlp2s0: deauthenticating from a4:3e:51:bd:9a:a6 by local choice (Reason: 3=DEAUTH_LEAVING)
[11106.129386] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[11106.129397] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[11106.430124] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.430152] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[11106.430161] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[11106.469706] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469733] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[11106.469758] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00002041/00002000
[11106.469781] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469797] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[11106.469801] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[11106.469816] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469830] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[11106.469843] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469856] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469868] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469881] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469893] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469906] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[11106.485582] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[11111.463032] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[11111.497215] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[11111.498936] wlp2s0: authenticated
[11111.501387] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[11111.505634] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[11111.507667] wlp2s0: associated
[11111.507759] ath: EEPROM regdomain: 0x80fa
[11111.507763] ath: Country alpha2 being used: FR
[11111.507765] ath: regdomain 0x80fa dynamically updated by country element
[11111.523471] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[11111.538651] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[12133.709173] wlp2s0: Connection to AP a4:3e:51:bd:9a:a6 lost
[12134.045166] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[12134.076054] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[12134.077575] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[12134.079774] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[12134.081297] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[12138.734988] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[12138.766339] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[12138.767695] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[12138.768971] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[12138.770368] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[12144.323824] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[12144.379012] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[12144.380708] wlp2s0: authenticated
[12144.384997] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[12144.389335] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[12144.392032] wlp2s0: associated
[12144.392280] ath: EEPROM regdomain: 0x80fa
[12144.392296] ath: Country alpha2 being used: FR
[12144.392302] ath: regdomain 0x80fa dynamically updated by country element
[12144.451949] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
sophie@sophie-Aspire-A315-54K:~$ Hors ligne
#40 Le 25/10/2021, à 08:28
- NicoApi73
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Bonjour,
Voici ce que j'ai trouvé : https://bbs.archlinux.org/viewtopic.php?id=233365. Je n'ai pas le temps d'aller plus loin ce matin. J'essaie de passer ce soir sur le forum.
Hors ligne
#41 Le 25/10/2021, à 08:33
- xubu1957
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Bonjour,
Montre :
systemctl | grep -i networket :
ls -alrt /etc/NetworkManager/system-connectionsen caviardant d'éventuelles données personnelles.
> [résolu] plusieurs fois le même réseau wifi
Dernière modification par xubu1957 (Le 25/10/2021, à 08:34)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#42 Le 25/10/2021, à 08:59
- marie_p19
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Bonjour,
sophie@sophie-Aspire-A315-54K:~$ systemctl | grep -i network
sys-devices-pci0000:00-0000:00:1c.5-0000:02:00.0-net-wlp2s0.device loaded active plugged QCA9377 802.11ac Wireless Network Adapter (Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter)
sys-subsystem-net-devices-wlp2s0.device loaded active plugged QCA9377 802.11ac Wireless Network Adapter (Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter)
networkd-dispatcher.service loaded active running Dispatcher daemon for systemd-networkd
NetworkManager-wait-online.service loaded active exited Network Manager Wait Online
NetworkManager.service loaded active running Network Manager
systemd-resolved.service loaded active running Network Name Resolution
systemd-timesyncd.service loaded active running Network Time Synchronization
network-online.target loaded active active Network is Online
network.target loaded active active Network
nss-lookup.target loaded active active Host and Network Name Lookups
sophie@sophie-Aspire-A315-54K:~$sophie@sophie-Aspire-A315-54K:~$ ls -alrt /etc/NetworkManager/system-connections
total 12
-rw------- 1 root root 358 oct. 9 2020 Livebox-9AA6.nmconnection
drwxr-xr-x 7 root root 4096 nov. 20 2020 ..
drwxr-xr-x 2 root root 4096 oct. 23 12:23 .
sophie@sophie-Aspire-A315-54K:~$ Hors ligne
#43 Le 26/10/2021, à 08:38
- NicoApi73
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Bonjour,
Peux tu donner le retour de
systemctl list-unit-files --state=enabledHors ligne
#44 Le 26/10/2021, à 17:50
- marie_p19
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Bonsoir,
voilà
sophie@sophie-Aspire-A315-54K:~$ systemctl list-unit-files --state=enabled
UNIT FILE STATE VENDOR PRESET
snap-bare-5.mount enabled enabled
snap-core18-2074.mount enabled enabled
snap-core18-2128.mount enabled enabled
snap-gnome\x2d3\x2d28\x2d1804-145.mount enabled enabled
snap-gnome\x2d3\x2d28\x2d1804-161.mount enabled enabled
snap-gnome\x2d3\x2d34\x2d1804-66.mount enabled enabled
snap-gnome\x2d3\x2d34\x2d1804-72.mount enabled enabled
snap-gtk\x2dcommon\x2dthemes-1515.mount enabled enabled
snap-gtk\x2dcommon\x2dthemes-1519.mount enabled enabled
snap-snap\x2dstore-542.mount enabled enabled
snap-snap\x2dstore-547.mount enabled enabled
snap-snapd-13270.mount enabled enabled
snap-snapd-13640.mount enabled enabled
acpid.path enabled enabled
apport-autoreport.path enabled enabled
cups.path enabled enabled
accounts-daemon.service enabled enabled
anacron.service enabled enabled
apache2.service enabled enabled
apparmor.service enabled enabled
autovt@.service enabled enabled
avahi-daemon.service enabled enabled
lines 1-23...skipping...
UNIT FILE STATE VENDOR PRESET
snap-bare-5.mount enabled enabled
snap-core18-2074.mount enabled enabled
snap-core18-2128.mount enabled enabled
snap-gnome\x2d3\x2d28\x2d1804-145.mount enabled enabled
snap-gnome\x2d3\x2d28\x2d1804-161.mount enabled enabled
snap-gnome\x2d3\x2d34\x2d1804-66.mount enabled enabled
snap-gnome\x2d3\x2d34\x2d1804-72.mount enabled enabled
snap-gtk\x2dcommon\x2dthemes-1515.mount enabled enabled
snap-gtk\x2dcommon\x2dthemes-1519.mount enabled enabled
snap-snap\x2dstore-542.mount enabled enabled
snap-snap\x2dstore-547.mount enabled enabled
snap-snapd-13270.mount enabled enabled
snap-snapd-13640.mount enabled enabled
acpid.path enabled enabled
apport-autoreport.path enabled enabled
cups.path enabled enabled
accounts-daemon.service enabled enabled
anacron.service enabled enabled
apache2.service enabled enabled
apparmor.service enabled enabled
autovt@.service enabled enabled
avahi-daemon.service enabled enabled
bluetooth.service enabled enabled
console-setup.service enabled enabled
cron.service enabled enabled
cups-browsed.service enabled enabled
cups.service enabled enabled
dbus-fi.w1.wpa_supplicant1.service enabled enabled
dbus-org.bluez.service enabled enabled
dbus-org.freedesktop.Avahi.service enabled enabled
dbus-org.freedesktop.ModemManager1.service enabled enabled
dbus-org.freedesktop.nm-dispatcher.service enabled enabled
dbus-org.freedesktop.resolve1.service enabled enabled
dbus-org.freedesktop.thermald.service enabled enabled
dbus-org.freedesktop.timesync1.service enabled enabled
dmesg.service enabled enabled
e2scrub_reap.service enabled enabled
getty@.service enabled enabled
gpu-manager.service enabled enabled
lines 1-40
UNIT FILE STATE VENDOR PRESET
snap-bare-5.mount enabled enabled
snap-core18-2074.mount enabled enabled
snap-core18-2128.mount enabled enabled
snap-gnome\x2d3\x2d28\x2d1804-145.mount enabled enabled
snap-gnome\x2d3\x2d28\x2d1804-161.mount enabled enabled
snap-gnome\x2d3\x2d34\x2d1804-66.mount enabled enabled
snap-gnome\x2d3\x2d34\x2d1804-72.mount enabled enabled
snap-gtk\x2dcommon\x2dthemes-1515.mount enabled enabled
snap-gtk\x2dcommon\x2dthemes-1519.mount enabled enabled
snap-snap\x2dstore-542.mount enabled enabled
snap-snap\x2dstore-547.mount enabled enabled
snap-snapd-13270.mount enabled enabled
snap-snapd-13640.mount enabled enabled
acpid.path enabled enabled
apport-autoreport.path enabled enabled
cups.path enabled enabled
accounts-daemon.service enabled enabled
anacron.service enabled enabled
apache2.service enabled enabled
apparmor.service enabled enabled
autovt@.service enabled enabled
avahi-daemon.service enabled enabled
bluetooth.service enabled enabled
console-setup.service enabled enabled
cron.service enabled enabled
cups-browsed.service enabled enabled
cups.service enabled enabled
dbus-fi.w1.wpa_supplicant1.service enabled enabled
dbus-org.bluez.service enabled enabled
dbus-org.freedesktop.Avahi.service enabled enabled
dbus-org.freedesktop.ModemManager1.service enabled enabled
dbus-org.freedesktop.nm-dispatcher.service enabled enabled
dbus-org.freedesktop.resolve1.service enabled enabled
dbus-org.freedesktop.thermald.service enabled enabled
dbus-org.freedesktop.timesync1.service enabled enabled
dmesg.service enabled enabled
lines 1-37est-ce normal que ça ne revienne pas à l'invite de commande habituelle ?
Hors ligne
#45 Le 26/10/2021, à 18:11
- iznobe
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Bonsoir , pour ceux qui aident , je me permet une remarque , bien que je ne sois pas du tout expert en la matiere mais bon ...
On remarque dans le retour du message #39 ce passage qui me parait etre la cause du probleme et qui semble correspondre a une connexion automatique a une autre BOX ? avec une adresse MAC semblable , mais differente ( puisque le derniere caractere est different b ou 6 selon le cas ) , puis qui re deco et se reco sur l' adresse MAC " primaire " :
[ 10.621140] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 10.652807] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 10.654526] wlp2s0: authenticated
[ 10.660302] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 10.664588] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 10.666701] wlp2s0: associated
[ 10.666780] ath: EEPROM regdomain: 0x80fa
[ 10.666785] ath: Country alpha2 being used: FR
[ 10.666787] ath: regdomain 0x80fa dynamically updated by country element
[ 10.704360] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 10.731541] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 47.344038] wlp2s0: disconnect from AP a4:3e:51:bd:9a:a6 for new auth to a4:3e:51:bd:9a:ab
[ 47.351616] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 47.380456] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 47.383869] wlp2s0: authenticated
[ 47.388240] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 1/3)
[ 47.391500] wlp2s0: RX ReassocResp from a4:3e:51:bd:9a:ab (capab=0x1511 status=0 aid=41)
[ 47.393744] wlp2s0: associated
[ 47.393823] ath: EEPROM regdomain: 0x80fa
[ 47.393828] ath: Country alpha2 being used: FR
[ 47.393830] ath: regdomain 0x80fa dynamically updated by country element
[ 47.492794] wlp2s0: Limiting TX power to 26 (26 - 0) dBm as advertised by a4:3e:51:bd:9a:ab
[ 70.006117] wlp2s0: deauthenticated from a4:3e:51:bd:9a:ab (Reason: 12=<unknown>)
[ 70.239058] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 70.271017] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 70.272903] wlp2s0: authenticated
[ 70.280601] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 70.284689] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 70.286692] wlp2s0: associateden tout cas cela ne me semble pas normal de deco et reco sur autre adresse MAC .
en particulier ces lignes :
[ 10.731541] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 47.344038] wlp2s0: disconnect from AP a4:3e:51:bd:9a:a6 for new auth to a4:3e:51:bd:9a:ab
.....................................................................................................
[ 47.492794] wlp2s0: Limiting TX power to 26 (26 - 0) dBm as advertised by a4:3e:51:bd:9a:ab
[ 70.006117] wlp2s0: deauthenticated from a4:3e:51:bd:9a:ab (Reason: 12=<unknown>)
[ 70.239058] wlp2s0: authenticate with a4:3e:51:bd:9a:a6est il possible que la carte wifi de l' ordi se deco du 2.4Ghz de la box pour passer sur le wifi 5Ghz de la box et vice versa selon comment elle capte l' une ou l' autre ?
si tel est le cas , dans les parametres de la box , il suffirait de desactiver le wifi 5Ghz .
Si j' ai dis n ' importe quoi , j ' en suis desolé 
Dernière modification par iznobe (Le 26/10/2021, à 18:19)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#46 Le 26/10/2021, à 21:30
- NicoApi73
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Salut iznobe,
Je te remerice (sincèrement) pour ton intervention. Je n'ai pas pris le temps de partager mon analyse (qui est incomplète pour l'instant).
Tout d'abord, tu n'as pas dit n'importe quoi : au #25, nous voyons les adresses MAC des bornes WiFi. La Livebox-9AA6 est effectivement bi-bande. L'interface ayant l'adresse MAC A4:3E:51:BD:9A:A6 est celle à 2.4GHz, celle ayant l'adresse MAC A4:3E:51:BD:9A:AB est celle à 5GHz.
Pour l'instant je n'arrive pas à déterminer la source de la déconnexion : est ce la box qui génère les déconnexions ou est ce la machine qui les génère.
Lors d'une recherche rapide, je suis tombé sur le fil cité au #40, dans lequel un conflit sur la machine aurait été identifié. J'essaie de voir si c'est la même situation.
Ton intervention m'a fait réanalyser les retours, et je suis passé à côté de quelque chose : les niveaux de réception ne sont pas terribles. (voir #25). La première chose à tenter serait peut être de rapprocher la machine de la box pour voir si les déconnexions sont liées à la qualité de la réception.
Hors ligne
#47 Le 26/10/2021, à 21:33
- NicoApi73
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
marie_p19 a écrit :
est-ce normal que ça ne revienne pas à l'invite de commande habituelle ?
Oui c'est normal : toutes les lignes n'ont pas été affichées. Déplace toi avec la flèche vers le bas pour afficher les suivantes. On quitte l'affichage en appuyant sur la lettre q
Hors ligne
#48 Le 27/10/2021, à 08:23
- marie_p19
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Bonjour,
comme je disais précédemment, il est certain que la qualité de réception n'aide certainement pas, mais nous étions dans un gîte récemment et mon ordinateur même à côté de la source du wifi, avec une réception pourtant excellente, se déconnectait quand même de temps en temps. De mémoire, il s'agissait notamment de difficultés à se reconnecter en sortie de veille, ça pouvait durer plusieurs minutes.
Concernant chez nous, nous sommes dans une maison (en loc, donc aucun moyen d'agir sur le logement lui-même) avec une seule prise téléphonique, à un bout de la maison. Donc il est tout à fait vrai que tous les remarques précédentes sur la bonne diffusion du signal wifi s'appliquent certainement. Les murs sont épais, et on voit le signal wifi s'amenuiser d'une pièce à l'autre.
Cependant au vu du comportement de mon ordi vs celui des autres machines + son comportement quand le wifi est bon, il me semble que mon ordi rencontre un souci supplémentaire qui ne semble pas lié à la qualité de réception (cf expérience du gîte).
Je vais tester en me rapprochant de la box comme je peux, ce n'est pas une pièce aménagée pour travailler il n'y a même pas de table donc il faut que je vois comment je m'organise. J'essayerai de venir faire le feedback quand je peux selon les essais, à mon avis pas avant ce week-end.
En plus d'observer le comportement de l'ordinateur, y'a-t-il des tests particuliers à lancer en étant plus proche de la box ?
Oui c'est normal : toutes les lignes n'ont pas été affichées. Déplace toi avec la flèche vers le bas pour afficher les suivantes. On quitte l'affichage en appuyant sur la lettre q
ok merci beaucoup pour l'explication !
Hors ligne
#49 Le 27/10/2021, à 08:35
- NicoApi73
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Bonjour,
Je comprends. L'objectif pour l'instant est de poser un diagnostic. On sait qu'il y a des déconnexions en cours d'utilisation et c'est ça que j'essaie de résoudre.
La sortie de veille peut poser problème avec Linux, allant jusqu'à l'écran noir pour certaines machines. Et de plus, pour le gîte, nous manquons d'informations (pas de logs).
Hors ligne
#50 Le 31/10/2021, à 17:30
- marie_p19
Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]
Bonjour,
pour tenir au courant : j'ai approché en partie l'ordi de la box ce week-end, mais je n'ai pratiquement pas eu de déconnexion même ailleurs dans la maison ces deux jours, sais pas pourquoi, il y a des jours où ça le fait et d'autres non. Je comptais notamment profiter d'un moment où ça bugge pour voir si en me rapprochant de la box ça se reconnecte, mais du coup je n'ai pas pu tester ça.
Donc je vous re-tiens au courant quand j'ai du nouveau concret après mes essais.
Hors ligne