Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 18/10/2021, à 22:01

seiat2

crash aprés mise a niveau

Bonjour a tou.te.s

Merci pour ce forum très efficace qui résout beaucoup de mes problèmes depuis plusieurs années.
Pour la première fois j'ai besoin de vous en personne (après recherche je ne trouve pas de solution).

J'utilise Ubuntu  21.04 sur un  HP 17-by3076nf     depuis plusieurs mois sans aucun souci. Mais après avoir fait la mise a niveau vers 21.10 aujourd'hui j'ai eu plusieurs crash. Plus rien ne répond, ni souris ni clavier l'écran reste bloqué. C'est arrivé 3 ou 4 fois en lecture video (la video s'arrete) a repetition (une dizaine de minutes de fonctionnement apres reboot puis recrash). Et une fois lors d'une utilisation bureautique.





Des idées?

Merci d'avances pour votre aide
Seiat

Hors ligne

#2 Le 19/10/2021, à 04:51

toffe5131

Re : crash aprés mise a niveau

Bonjour,

Je ne suis pas spécialiste mais il faudrait savoir ce que raconte les logs.
Après un reboot tu peux copier la fin de la sortie de la commande

 journalctl -b -1 

ou

 dmesg 

si tu n'as pas eu besoin de rebooter.

Bonne journée

Hors ligne

#3 Le 19/10/2021, à 09:22

seiat2

Re : crash aprés mise a niveau

Bonjour, merci pour ta reponse

apres journalctl -b -1

-- Journal begins at Sat 2021-09-04 10:26:40 CEST, ends at Tue 2021-10-19 10:18:51 CEST. --
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: microcode: microcode updated early to revision 0xa6, date = 2020-11-01
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: Linux version 5.13.0-19-generic (buildd@lgw01-amd64-013) (gcc (Ubuntu 11.2.0-7ubuntu2) 11.2.0, GNU ld (GNU Binutils f>
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.13.0-19-generic root=UUID=3e89475d-1f61-4a72-bb6d-90b922628f36 ro quiet spla>
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: KERNEL supported cpus:
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel:   Intel GenuineIntel
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel:   AMD AuthenticAMD
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel:   Hygon HygonGenuine
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel:   Centaur CentaurHauls
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel:   zhaoxin   Shanghai  
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-provided physical RAM map:
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x0000000000100000-0x000000006cab2fff] usable
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x000000006cab3000-0x000000006cab3fff] ACPI NVS
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x000000006cab4000-0x000000006cb11fff] usable
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x000000006cb12000-0x000000006cb12fff] reserved
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x000000006cb13000-0x000000006cd14fff] usable
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x000000006cd15000-0x000000006db60fff] reserved
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x000000006db61000-0x000000006dbfdfff] ACPI data
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x000000006dbfe000-0x000000006dcb8fff] ACPI NVS
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x000000006dcb9000-0x0000000072efefff] reserved
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x0000000072eff000-0x0000000072efffff] usable
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x0000000072f00000-0x000000007affffff] reserved
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x000000007b200000-0x000000007b3fffff] reserved
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x000000007b800000-0x00000000803fffff] reserved
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
oct. 19 10:17:25 elie-HP-Laptop-17-by3xxx kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved

apres dmesg

[    0.334114] integrity: Platform Keyring initialized
[    0.342846] Key type asymmetric registered
[    0.342849] Asymmetric key parser 'x509' registered
[    0.342860] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.342896] io scheduler mq-deadline registered
[    0.343613] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.343653] efifb: probing for efifb
[    0.343668] efifb: showing boot graphics
[    0.344467] efifb: framebuffer at 0x4000000000, using 5628k, total 5625k
[    0.344468] efifb: mode is 1600x900x32, linelength=6400, pages=1
[    0.344469] efifb: scrolling: redraw
[    0.344470] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.344573] fbcon: Deferring console take-over
[    0.344574] fb0: EFI VGA frame buffer device
[    0.344792] Monitor-Mwait will be used to enter C-1 state
[    0.344794] Monitor-Mwait will be used to enter C-2 state
[    0.344796] Monitor-Mwait will be used to enter C-3 state
[    0.344798] ACPI: \_SB_.PR00: Found 3 idle states
[    0.345567] ACPI: AC: AC Adapter [AC] (off-line)
[    0.345625] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:01/input/input0
[    0.345640] ACPI: button: Lid Switch [LID1]
[    0.345661] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.345675] ACPI: button: Power Button [PWRB]
[    0.345696] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.345723] ACPI: button: Power Button [PWRF]
[    0.346869] thermal LNXTHERM:00: registered as thermal_zone0
[    0.346871] ACPI: thermal: Thermal Zone [TZ00] (0 C)
[    0.347004] thermal LNXTHERM:01: registered as thermal_zone1
[    0.347005] ACPI: thermal: Thermal Zone [TZ01] (0 C)
[    0.347257] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.348842] hpet_acpi_add: no address or irqs in _CRS
[    0.348877] Linux agpgart interface v0.103
[    0.352514] ACPI: battery: Slot [BAT0] (battery present)
[    0.516093] loop: module loaded
[    0.516846] libphy: Fixed MDIO Bus: probed
[    0.516847] tun: Universal TUN/TAP device driver, 1.6
[    0.517071] PPP generic driver version 2.4.2
[    0.517549] VFIO - User Level meta-driver version: 0.3
[    0.517871] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.517876] ehci-pci: EHCI PCI platform driver
[    0.517883] ehci-platform: EHCI generic platform driver
[    0.517888] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.517889] ohci-pci: OHCI PCI platform driver
[    0.517893] ohci-platform: OHCI generic platform driver
[    0.517897] uhci_hcd: USB Universal Host Controller Interface driver
[    0.517929] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.517930] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.518789] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.518878] mousedev: PS/2 mouse device common for all mice
[    0.519009] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.519676] rtc_cmos rtc_cmos: registered as rtc0
[    0.519900] rtc_cmos rtc_cmos: setting system clock to 2021-10-19T08:18:13 UTC (1634631493)
[    0.519911] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.519915] i2c /dev entries driver
[    0.520404] device-mapper: uevent: version 1.0.3
[    0.520548] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.520565] platform eisa.0: Probing EISA bus 0
[    0.520567] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.520568] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.520569] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.520570] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.520571] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.520571] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.520572] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.520573] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.520573] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.520574] platform eisa.0: EISA: Detected 0 cards
[    0.520577] intel_pstate: Intel P-state driver initializing
[    0.521052] intel_pstate: HWP enabled
[    0.521802] ledtrig-cpu: registered to indicate activity on CPUs
[    0.521808] EFI Variables Facility v0.08 2004-May-17
[    0.526372] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.532107] intel_pmc_core INT33A1:00:  initialized
[    0.532240] drop_monitor: Initializing network drop monitor service
[    0.532364] NET: Registered protocol family 10
[    0.587561] Freeing initrd memory: 41940K
[    0.592754] Segment Routing with IPv6
[    0.592779] NET: Registered protocol family 17
[    0.592990] Key type dns_resolver registered
[    0.594468] microcode: sig=0x706e5, pf=0x80, revision=0xa6
[    0.594684] microcode: Microcode Update Driver: v2.2.
[    0.594689] IPI shorthand broadcast: enabled
[    0.594696] sched_clock: Marking stable (588129083, 6553100)->(605636947, -10954764)
[    0.594880] registered taskstats version 1
[    0.594889] Loading compiled-in X.509 certificates
[    0.595468] Loaded X.509 cert 'Build time autogenerated kernel key: b95acfc8c48e21a7b35c5c04d4e9fe5748a51740'
[    0.595928] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.596397] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.596398] blacklist: Loading compiled-in revocation X.509 certificates
[    0.596413] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    0.596631] zswap: loaded using pool lzo/zbud
[    0.596858] Key type ._fscrypt registered
[    0.596860] Key type .fscrypt registered
[    0.596861] Key type fscrypt-provisioning registered
[    0.597070] Key type trusted registered
[    0.598958] Key type encrypted registered
[    0.598960] AppArmor: AppArmor sha1 policy hashing enabled
[    0.599210] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[    0.599476] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.599481] Loading compiled-in module X.509 certificates
[    0.599973] Loaded X.509 cert 'Build time autogenerated kernel key: b95acfc8c48e21a7b35c5c04d4e9fe5748a51740'
[    0.599974] ima: Allocated hash algorithm: sha1
[    0.617299] ima: No architecture policies found
[    0.617312] evm: Initialising EVM extended attributes:
[    0.617313] evm: security.selinux
[    0.617314] evm: security.SMACK64
[    0.617315] evm: security.SMACK64EXEC
[    0.617316] evm: security.SMACK64TRANSMUTE
[    0.617317] evm: security.SMACK64MMAP
[    0.617317] evm: security.apparmor
[    0.617318] evm: security.ima
[    0.617319] evm: security.capability
[    0.617320] evm: HMAC attrs: 0x1
[    0.617706] PM:   Magic number: 9:570:321
[    0.617735] tty tty46: hash matches
[    0.617754] pci 0000:00:02.0: hash matches
[    0.618032] RAS: Correctable Errors collector initialized.
[    0.634523] Freeing unused decrypted memory: 2036K
[    0.634954] Freeing unused kernel image (initmem) memory: 2860K
[    0.652219] Write protecting the kernel read-only data: 30720k
[    0.653158] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.653640] Freeing unused kernel image (rodata/data gap) memory: 1788K
[    0.668905] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.668910] Run /init as init process
[    0.668911]   with arguments:
[    0.668912]     /init
[    0.668912]     splash
[    0.668913]   with environment:
[    0.668913]     HOME=/
[    0.668914]     TERM=linux
[    0.668914]     BOOT_IMAGE=/boot/vmlinuz-5.13.0-19-generic
[    0.739152] hid: raw HID events driver (C) Jiri Kosina
[    0.741572] ahci 0000:00:17.0: version 3.0
[    0.742272] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.742281] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.742842] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl RAID mode
[    0.742847] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds 
[    0.742861] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.742870] r8169 0000:01:00.0: enabling device (0000 -> 0003)
[    0.743395] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000000009810
[    0.743992] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[    0.744005] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.744008] usb usb1: Product: xHCI Host Controller
[    0.744010] usb usb1: Manufacturer: Linux 5.13.0-19-generic xhci-hcd
[    0.744012] usb usb1: SerialNumber: 0000:00:14.0
[    0.744211] hub 1-0:1.0: USB hub found
[    0.744236] hub 1-0:1.0: 12 ports detected
[    0.747616] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    0.747697] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    0.751814] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    0.753905] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    0.754551] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.754557] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.754562] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.754619] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13
[    0.754623] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.754625] usb usb2: Product: xHCI Host Controller
[    0.754627] usb usb2: Manufacturer: Linux 5.13.0-19-generic xhci-hcd
[    0.754629] usb usb2: SerialNumber: 0000:00:14.0
[    0.754900] hub 2-0:1.0: USB hub found
[    0.754922] hub 2-0:1.0: 6 ports detected
[    0.758274] libphy: r8169: probed
[    0.758497] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 6c:02:e0:07:6a:77, XID 541, IRQ 126
[    0.758504] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    0.760035] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    0.760825] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    0.764602] i2c i2c-0: 1/2 memory slots populated (from DMI)
[    0.766938] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    0.768954] scsi host0: ahci
[    0.769053] scsi host1: ahci
[    0.769138] scsi host2: ahci
[    0.769169] ata1: SATA max UDMA/133 abar m2048@0x80602000 port 0x80602100 irq 124
[    0.769172] ata2: SATA max UDMA/133 abar m2048@0x80602000 port 0x80602180 irq 124
[    0.769173] ata3: SATA max UDMA/133 abar m2048@0x80602000 port 0x80602200 irq 124
[    1.083686] ata2: SATA link down (SStatus 4 SControl 300)
[    1.083722] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.083755] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.083889] ata3.00: ATA-11: SSSTC CV8-8E128-HP, V881, max UDMA/100
[    1.083893] ata3.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.084557] ata3.00: configured for UDMA/100
[    1.085327] ata1.00: ATA-10: TOSHIBA MQ04ABF100, JU007C, max UDMA/100
[    1.085334] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.089206] ata1.00: configured for UDMA/100
[    1.089442] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ04ABF1 7C   PQ: 0 ANSI: 5
[    1.089770] sd 0:0:0:0: [sda] Drive-managed SMR disk
[    1.089778] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.089781] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.089790] sd 0:0:0:0: [sda] Write Protect is off
[    1.089793] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.089795] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.089808] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.090161] scsi 2:0:0:0: Direct-Access     ATA      SSSTC CV8-8E128- V881 PQ: 0 ANSI: 5
[    1.090469] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.090482] sd 2:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.090487] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    1.090496] sd 2:0:0:0: [sdb] Write Protect is off
[    1.090499] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.090513] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.092106] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    1.114502]  sdb: sdb1 sdb2
[    1.156211] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.185355]  sda: sda1
[    1.228176] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.235655] input: ELAN0723:01 04F3:30A0 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0723:01/0018:04F3:30A0.0001/input/input4
[    1.235802] input: ELAN0723:01 04F3:30A0 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0723:01/0018:04F3:30A0.0001/input/input6
[    1.235911] hid-generic 0018:04F3:30A0.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0723:01 04F3:30A0] on i2c-ELAN0723:01
[    1.246639] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.01
[    1.246648] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.246652] usb 1-3: Product: USB Receiver
[    1.246654] usb 1-3: Manufacturer: Logitech
[    1.376125] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[    1.534538] usb 1-6: New USB device found, idVendor=0408, idProduct=5365, bcdDevice= 0.02
[    1.534558] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.534561] usb 1-6: Product: HP TrueVision HD Camera
[    1.534564] usb 1-6: Manufacturer: SunplusIT Inc
[    1.664107] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[    1.813209] usb 1-10: New USB device found, idVendor=0bda, idProduct=b00a, bcdDevice= 1.10
[    1.813221] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.813225] usb 1-10: Product: Bluetooth Radio 
[    1.813227] usb 1-10: Manufacturer: Realtek 
[    1.813239] usb 1-10: SerialNumber: 00e04c000001
[    1.822193] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C52B.0002/input/input7
[    1.880446] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[    1.882663] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0003/input/input8
[    1.883039] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0003/input/input9
[    1.940378] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52B.0003/input/input10
[    1.940591] hid-generic 0003:046D:C52B.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[    1.942419] hid-generic 0003:046D:C52B.0004: hiddev1,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[    1.942495] usbcore: registered new interface driver usbhid
[    1.942499] usbhid: USB HID core driver
[    2.116959] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[    2.238394] input: Logitech Wireless Device PID:1025 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0004/0003:046D:1025.0005/input/input12
[    2.238605] hid-generic 0003:046D:1025.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Device PID:1025] on usb-0000:00:14.0-3/input2:1
[    2.312043] input: Logitech M510 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0004/0003:046D:1025.0005/input/input16
[    2.312495] logitech-hidpp-device 0003:046D:1025.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M510] on usb-0000:00:14.0-3/input2:1
[    2.362763] fbcon: Taking over console
[    2.362856] Console: switching to colour frame buffer device 200x56
[    2.437546] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    2.560800] systemd[1]: Inserted module 'autofs4'
[    2.598892] systemd[1]: systemd 248.3-1ubuntu8 running in system mode. (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    2.616371] systemd[1]: Detected architecture x86-64.
[    2.616996] systemd[1]: Hostname set to <elie-HP-Laptop-17-by3xxx>.
[    2.766847] systemd[1]: Queued start job for default target Graphical Interface.
[    2.767836] systemd[1]: Created slice system-modprobe.slice.
[    2.767995] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.768169] systemd[1]: Created slice User and Session Slice.
[    2.768205] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.768304] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.768337] systemd[1]: Reached target User and Group Name Lookups.
[    2.768346] systemd[1]: Reached target Remote File Systems.
[    2.768351] systemd[1]: Reached target Slices.
[    2.768366] systemd[1]: Reached target Local Verity Integrity Protected Volumes.
[    2.769410] systemd[1]: Listening on Syslog Socket.
[    2.769457] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.769486] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.769586] systemd[1]: Listening on Journal Audit Socket.
[    2.769626] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.769672] systemd[1]: Listening on Journal Socket.
[    2.770870] systemd[1]: Listening on udev Control Socket.
[    2.770912] systemd[1]: Listening on udev Kernel Socket.
[    2.771292] systemd[1]: Mounting Huge Pages File System...
[    2.771731] systemd[1]: Mounting POSIX Message Queue File System...
[    2.772297] systemd[1]: Mounting Kernel Debug File System...
[    2.772998] systemd[1]: Mounting Kernel Trace File System...
[    2.774339] systemd[1]: Starting Journal Service...
[    2.775059] systemd[1]: Starting Set the console keyboard layout...
[    2.775598] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.776254] systemd[1]: Starting Load Kernel Module configfs...
[    2.777015] systemd[1]: Starting Load Kernel Module drm...
[    2.777804] systemd[1]: Starting Load Kernel Module fuse...
[    2.778594] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    2.778636] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    2.779721] systemd[1]: Starting Load Kernel Modules...
[    2.780384] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.780976] systemd[1]: Starting Coldplug All udev Devices...
[    2.781498] systemd[1]: Starting Uncomplicated firewall...
[    2.782749] systemd[1]: Mounted Huge Pages File System.
[    2.782826] systemd[1]: Mounted POSIX Message Queue File System.
[    2.782925] systemd[1]: Mounted Kernel Debug File System.
[    2.782975] systemd[1]: Mounted Kernel Trace File System.
[    2.783136] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    2.783319] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    2.783435] systemd[1]: Finished Load Kernel Module configfs.
[    2.783566] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    2.783678] systemd[1]: Finished Load Kernel Module fuse.
[    2.784374] systemd[1]: Mounting FUSE Control File System...
[    2.785335] systemd[1]: Mounting Kernel Configuration File System...
[    2.786208] systemd[1]: Finished Uncomplicated firewall.
[    2.787351] systemd[1]: Mounted FUSE Control File System.
[    2.788476] systemd[1]: Mounted Kernel Configuration File System.
[    2.790856] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    2.790995] systemd[1]: Finished Load Kernel Module drm.
[    2.793496] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[    2.794272] systemd[1]: Finished Remount Root and Kernel File Systems.
[    2.794816] systemd[1]: Activating swap /swapfile...
[    2.795677] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    2.795737] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    2.796587] systemd[1]: Starting Load/Save Random Seed...
[    2.797246] systemd[1]: Starting Create System Users...
[    2.798130] lp: driver loaded but no devices found
[    2.801842] ppdev: user-space parallel port driver
[    2.815933] systemd[1]: Started Journal Service.
[    2.827773] systemd-journald[304]: Received client request to flush runtime journal.
[    2.848044] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[    2.852431] systemd-journald[304]: File /var/log/journal/b39b3722f4234db0a1e36b516cb6bebc/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    2.875721] loop0: detected capacity change from 0 to 765496
[    2.900394] loop1: detected capacity change from 0 to 8
[    2.928306] loop2: detected capacity change from 0 to 113560
[    2.928596] loop3: detected capacity change from 0 to 126632
[    2.960221] loop4: detected capacity change from 0 to 113536
[    2.960365] loop5: detected capacity change from 0 to 169760
[    2.960456] loop6: detected capacity change from 0 to 9552
[    2.992324] loop7: detected capacity change from 0 to 337424
[    3.056258] loop8: detected capacity change from 0 to 307976
[    3.071133] input: HP Wireless hotkeys as /devices/virtual/input/input17
[    3.132620] loop9: detected capacity change from 0 to 203424
[    3.165309] mc: Linux media interface: v0.10
[    3.172386] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.189521] pstore: Using crash dump compression: deflate
[    3.189532] pstore: Registered efi as persistent store backend
[    3.194624] input: HP WMI hotkeys as /devices/virtual/input/input18
[    3.200371] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    3.201386] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[    3.201768] intel_rapl_common: Found RAPL domain package
[    3.224228] loop10: detected capacity change from 0 to 132216
[    3.242169] videodev: Linux video capture interface: v2.00
[    3.242398] Bluetooth: Core ver 2.22
[    3.242421] NET: Registered protocol family 31
[    3.242422] Bluetooth: HCI device and connection manager initialized
[    3.242429] Bluetooth: HCI socket layer initialized
[    3.242432] Bluetooth: L2CAP socket layer initialized
[    3.242437] Bluetooth: SCO socket layer initialized
[    3.242718] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.242974] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.244444] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    3.244448] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.244449] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.244450] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.244451] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.249285] cryptd: max_cpu_qlen set to 1000
[    3.259075] usbcore: registered new interface driver btusb
[    3.266960] AVX2 version of gcm_enc/dec engaged.
[    3.267005] AES CTR mode by8 optimization enabled
[    3.267898] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
[    3.268849] Bluetooth: hci0: RTL: rom_version status=0 version=1
[    3.268854] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
[    3.274297] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
[    3.276640] Bluetooth: hci0: RTL: cfg_sz 10, total sz 31990
[    3.317460] loop11: detected capacity change from 0 to 66368
[    3.352360] usb 1-6: Found UVC 1.00 device HP TrueVision HD Camera (0408:5365)
[    3.352449] intel_rapl_common: Found RAPL domain package
[    3.352453] intel_rapl_common: Found RAPL domain core
[    3.352454] intel_rapl_common: Found RAPL domain uncore
[    3.352457] intel_rapl_common: Found RAPL domain psys
[    3.373938] input: ELAN0723:01 04F3:30A0 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0723:01/0018:04F3:30A0.0001/input/input19
[    3.374132] input: ELAN0723:01 04F3:30A0 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0723:01/0018:04F3:30A0.0001/input/input21
[    3.374278] hid-multitouch 0018:04F3:30A0.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0723:01 04F3:30A0] on i2c-ELAN0723:01
[    3.380317] loop12: detected capacity change from 0 to 496320
[    3.383439] checking generic (4000000000 57f000) vs hw (6000000000 1000000)
[    3.383444] checking generic (4000000000 57f000) vs hw (4000000000 10000000)
[    3.383446] fb0: switching to inteldrmfb from EFI VGA
[    3.383728] Console: switching to colour dummy device 80x25
[    3.383782] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.386182] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.387264] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    3.388401] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9)
[    3.390431] input: HP TrueVision HD Camera: HP Tru as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input22
[    3.390725] usbcore: registered new interface driver uvcvideo
[    3.405541] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    3.409922] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.410960] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input23
[    3.430243] rtw_8821ce 0000:02:00.0: enabling device (0000 -> 0003)
[    3.431044] rtw_8821ce 0000:02:00.0: Firmware version 24.8.0, H2C version 12
[    3.444172] loop13: detected capacity change from 0 to 448496
[    3.449562] fbcon: i915drmfb (fb0) is primary device
[    3.449620] Console: switching to colour frame buffer device 200x56
[    3.449633] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    3.456341] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[    3.456384] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    3.456607] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.491154] intel_tcc_cooling: Programmable TCC Offset detected
[    3.494428] rtw_8821ce 0000:02:00.0 wlp2s0: renamed from wlan0
[    3.500439] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.500448] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.500451] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.500453] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.500455] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.500456] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[    3.500458] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.516164] loop14: detected capacity change from 0 to 448512
[    3.573408] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    3.573452] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[    3.573483] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[    3.573511] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[    3.573538] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[    3.573567] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[    3.573597] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[    3.573635] input: HDA Intel PCH HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[    3.573660] input: HDA Intel PCH HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
[    3.591426] loop15: detected capacity change from 0 to 111048
[    3.652433] loop16: detected capacity change from 0 to 133552
[    3.736479] loop17: detected capacity change from 0 to 126504
[    3.737886] Bluetooth: hci0: RTL: fw version 0x829a7644
[    3.820493] loop18: detected capacity change from 0 to 133320
[    3.896407] loop19: detected capacity change from 0 to 203656
[    3.972327] loop20: detected capacity change from 0 to 66168
[    4.052317] loop21: detected capacity change from 0 to 104360
[    4.053416] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    4.141024] audit: type=1400 audit(1634631497.115:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=902 comm="apparmor_parser"
[    4.141035] audit: type=1400 audit(1634631497.119:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=894 comm="apparmor_parser"
[    4.141113] audit: type=1400 audit(1634631497.119:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=895 comm="apparmor_parser"
[    4.141120] audit: type=1400 audit(1634631497.119:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=895 comm="apparmor_parser"
[    4.141334] audit: type=1400 audit(1634631497.119:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=901 comm="apparmor_parser"
[    4.141518] audit: type=1400 audit(1634631497.119:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=899 comm="apparmor_parser"
[    4.141523] audit: type=1400 audit(1634631497.119:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=899 comm="apparmor_parser"
[    4.141526] audit: type=1400 audit(1634631497.119:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=899 comm="apparmor_parser"
[    4.145318] audit: type=1400 audit(1634631497.123:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=904 comm="apparmor_parser"
[    4.504107] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.504113] Bluetooth: BNEP filters: protocol multicast
[    4.504120] Bluetooth: BNEP socket layer initialized
[    4.528238] NET: Registered protocol family 38
[    4.748032] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
[    4.792245] loop22: detected capacity change from 0 to 8
[    4.866701] systemd-journald[304]: File /var/log/journal/b39b3722f4234db0a1e36b516cb6bebc/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[    4.960193] r8169 0000:01:00.0 enp1s0: Link is Down
[    5.113320] kauditd_printk_skb: 61 callbacks suppressed
[    5.113323] audit: type=1400 audit(1634631498.091:72): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager" name="/proc/1265/attr/current" pid=1265 comm="cat" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[    5.113823] audit: type=1400 audit(1634631498.091:73): apparmor="ALLOWED" operation="exec" profile="snap.anbox.container-manager" name="/usr/sbin/aa-exec" pid=1066 comm="container-manag" requested_mask="x" denied_mask="x" fsuid=0 ouid=0 target="snap.anbox.container-manager//null-/usr/sbin/aa-exec"
[    5.117753] audit: type=1400 audit(1634631498.095:74): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/usr/sbin/aa-exec" name="/usr/sbin/aa-exec" pid=1066 comm="aa-exec" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[    5.117761] audit: type=1400 audit(1634631498.095:75): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/usr/sbin/aa-exec" name="/lib/x86_64-linux-gnu/ld-2.23.so" pid=1066 comm="aa-exec" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[    5.117902] audit: type=1400 audit(1634631498.095:76): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/usr/sbin/aa-exec" name="/etc/ld.so.cache" pid=1066 comm="aa-exec" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[    5.117916] audit: type=1400 audit(1634631498.095:77): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/usr/sbin/aa-exec" name="/lib/x86_64-linux-gnu/libpthread-2.23.so" pid=1066 comm="aa-exec" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[    5.117923] audit: type=1400 audit(1634631498.095:78): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/usr/sbin/aa-exec" name="/lib/x86_64-linux-gnu/libpthread-2.23.so" pid=1066 comm="aa-exec" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[    5.117964] audit: type=1400 audit(1634631498.095:79): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/usr/sbin/aa-exec" name="/lib/x86_64-linux-gnu/libc-2.23.so" pid=1066 comm="aa-exec" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[    5.117971] audit: type=1400 audit(1634631498.095:80): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/usr/sbin/aa-exec" name="/lib/x86_64-linux-gnu/libc-2.23.so" pid=1066 comm="aa-exec" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[    5.118164] audit: type=1400 audit(1634631498.095:81): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/usr/sbin/aa-exec" name="/proc/1066/attr/exec" pid=1066 comm="aa-exec" requested_mask="w" denied_mask="w" fsuid=0 ouid=0
[    5.389978] bpfilter: Loaded bpfilter_umh pid 1378
[    5.390169] Started bpfilter
[    5.484975] rtw_8821ce 0000:02:00.0: start vif 18:47:3d:b5:2a:9b on port 0
[    5.540712] ashmem_linux: module is from the staging directory, the quality is unknown, you have been warned.
[    5.541002] ashmem: initialized
[    6.003002] Bluetooth: RFCOMM TTY layer initialized
[    6.003009] Bluetooth: RFCOMM socket layer initialized
[    6.003013] Bluetooth: RFCOMM ver 1.11
[    6.087701] loop22: detected capacity change from 0 to 636528
[    6.101172] overlayfs: "xino" feature enabled using 32 upper inode bits.
[    7.001578] rfkill: input handler disabled
[    9.941017] wlp2s0: authenticate with 02:63:45:6c:06:ee
[   10.472073] wlp2s0: send auth to 02:63:45:6c:06:ee (try 1/3)
[   11.896268] wlp2s0: send auth to 02:63:45:6c:06:ee (try 2/3)
[   11.898681] wlp2s0: authenticated
[   11.904024] wlp2s0: associate with 02:63:45:6c:06:ee (try 1/3)
[   11.921509] wlp2s0: RX AssocResp from 02:63:45:6c:06:ee (capab=0x1531 status=0 aid=4)
[   11.921557] rtw_8821ce 0000:02:00.0: sta 02:63:45:6c:06:ee joined with macid 0
[   11.922366] wlp2s0: associated
[   12.012145] wlp2s0: Limiting TX power to 14 (14 - 0) dBm as advertised by 02:63:45:6c:06:ee
[   12.012301] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   12.116356] kauditd_printk_skb: 13 callbacks suppressed
[   12.116359] audit: type=1400 audit(1634631505.095:95): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=2382 comm="cups-browsed" capability=23  capname="sys_nice"
[   15.208339] audit: type=1107 audit(1634631508.187:96): pid=969 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.9" pid=1746 label="snap.snap-store.ubuntu-software" peer_pid=984 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   15.208690] audit: type=1107 audit(1634631508.187:97): pid=969 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.9" pid=1746 label="snap.snap-store.ubuntu-software" peer_pid=984 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   15.220862] audit: type=1107 audit(1634631508.199:98): pid=969 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.9" pid=1746 label="snap.snap-store.ubuntu-software" peer_pid=984 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   15.221152] audit: type=1107 audit(1634631508.199:99): pid=969 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.9" pid=1746 label="snap.snap-store.ubuntu-software" peer_pid=984 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[   15.652540] audit: type=1400 audit(1634631508.631:100): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/PackageKit/Vendor.conf" pid=1746 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   61.984094] rtw_8821ce 0000:02:00.0: firmware failed to leave lps state

A bientot
seiat

Hors ligne

#4 Le 19/10/2021, à 21:52

Ilari1

Re : crash aprés mise a niveau

Tente
$ sudo apt update

Bonne soirée.

Hors ligne

#5 Le 19/10/2021, à 22:08

hotnuma

Re : crash aprés mise a niveau

rtw_8821ce 0000:02:00.0: firmware failed to leave lps state

Le pilote Wifi qui ne se charge pas on dirait.


Xubuntu / GitHub

Hors ligne

#6 Le 20/10/2021, à 05:37

xubu1957

Re : crash aprés mise a niveau

Bonjour,

Voir le § 2 et le début du § 3 > [Tuto] Pas de Wi-fi ? Eléments importants à vérifier, pour désactiver le secure-boot.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#7 Le 20/10/2021, à 10:25

seiat2

Re : crash aprés mise a niveau

Bonjour

apt-update ne résout pas le problème

Le wifi fonctionne correctement, j'ai tout de même vérifier dans mon bios le secure-boot est bien désactiver (depuis l'installation de ubuntu) .



Merci pour vos reponses

Seiat

Hors ligne

#8 Le 20/10/2021, à 10:26

xubu1957

Re : crash aprés mise a niveau

Donne le retour de :

sudo apt update

Montre aussi d'éventuels paquets cassés :

dpkg -l | grep -v ^ii

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#9 Le 20/10/2021, à 10:53

seiat2

Re : crash aprés mise a niveau

Le retour de

apt-get update
Atteint :1 http://fr.archive.ubuntu.com/ubuntu impish InRelease
Réception de :2 http://fr.archive.ubuntu.com/ubuntu impish-updates InRelease [90,7 kB]
Réception de :3 http://security.ubuntu.com/ubuntu impish-security InRelease [90,7 kB]
Atteint :4 http://fr.archive.ubuntu.com/ubuntu impish-backports InRelease      
Réception de :5 http://fr.archive.ubuntu.com/ubuntu impish-updates/main amd64 Packages [17,8 kB]
Réception de :6 http://fr.archive.ubuntu.com/ubuntu impish-updates/main i386 Packages [3396 B]
203 ko réceptionnés en 1s (232 ko/s)                                     
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
7 paquets peuvent être mis à jour. Exécutez « apt list --upgradable » pour les voir.

Le retour de

dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                        Version                            Architecture Description
+++-==========================================-==================================-============-===============================================================================
rc  i3-wm                                      4.19.1-1                           amd64        improved dynamic tiling window manager
rc  linux-image-5.11.0-16-generic              5.11.0-16.17                       amd64        Signed kernel image generic
rc  linux-image-5.11.0-31-generic              5.11.0-31.33                       amd64        Signed kernel image generic
rc  linux-image-5.11.0-34-generic              5.11.0-34.36                       amd64        Signed kernel image generic
rc  linux-modules-5.11.0-16-generic            5.11.0-16.17                       amd64        Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc  linux-modules-5.11.0-31-generic            5.11.0-31.33                       amd64        Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc  linux-modules-5.11.0-34-generic            5.11.0-34.36                       amd64        Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.11.0-16-generic      5.11.0-16.17                       amd64        Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.11.0-31-generic      5.11.0-31.33                       amd64        Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.11.0-34-generic      5.11.0-34.36                       amd64        Linux kernel extra modules for version 5.11.0 on 64 bit x86 SMP

Hors ligne

#10 Le 20/10/2021, à 11:03

xubu1957

Re : crash aprés mise a niveau

7 paquets peuvent être mis à jour

Montre :

sudo apt full-upgrade

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#11 Le 20/10/2021, à 11:20

seiat2

Re : crash aprés mise a niveau

Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
Calcul de la mise à jour... Fait
Les NOUVEAUX paquets suivants seront installés :
  linux-headers-5.13.0-20 linux-headers-5.13.0-20-generic
  linux-image-5.13.0-20-generic linux-modules-5.13.0-20-generic
  linux-modules-extra-5.13.0-20-generic
Les paquets suivants seront mis à jour :
  linux-generic linux-generic-hwe-20.04 linux-headers-generic
  linux-headers-generic-hwe-20.04 linux-image-generic
  linux-image-generic-hwe-20.04 linux-libc-dev
7 mis à jour, 5 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 102 Mo dans les archives.
Après cette opération, 502 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] 
Réception de :1 http://fr.archive.ubuntu.com/ubuntu impish-updates/main amd64 linux-modules-5.13.0-20-generic amd64 5.13.0-20.20 [20,1 MB]
Réception de :2 http://fr.archive.ubuntu.com/ubuntu impish-updates/main amd64 linux-image-5.13.0-20-generic amd64 5.13.0-20.20 [10,1 MB]
Réception de :3 http://fr.archive.ubuntu.com/ubuntu impish-updates/main amd64 linux-modules-extra-5.13.0-20-generic amd64 5.13.0-20.20 [55,6 MB]
Réception de :4 http://fr.archive.ubuntu.com/ubuntu impish-updates/main amd64 linux-generic amd64 5.13.0.20.31 [1696 B]
Réception de :5 http://fr.archive.ubuntu.com/ubuntu impish-updates/main amd64 linux-image-generic amd64 5.13.0.20.31 [2382 B]
Réception de :6 http://fr.archive.ubuntu.com/ubuntu impish-updates/main amd64 linux-headers-5.13.0-20 all 5.13.0-20.20 [12,1 MB]
Réception de :7 http://fr.archive.ubuntu.com/ubuntu impish-updates/main amd64 linux-headers-5.13.0-20-generic amd64 5.13.0-20.20 [2520 kB]
Réception de :8 http://fr.archive.ubuntu.com/ubuntu impish-updates/main amd64 linux-headers-generic amd64 5.13.0.20.31 [2268 B]
Réception de :9 http://fr.archive.ubuntu.com/ubuntu impish-updates/main amd64 linux-generic-hwe-20.04 amd64 5.13.0.20.31 [1674 B]
Réception de :10 http://fr.archive.ubuntu.com/ubuntu impish-updates/main amd64 linux-image-generic-hwe-20.04 amd64 5.13.0.20.31 [2402 B]
Réception de :11 http://fr.archive.ubuntu.com/ubuntu impish-updates/main amd64 linux-headers-generic-hwe-20.04 amd64 5.13.0.20.31 [2298 B]
Réception de :12 http://fr.archive.ubuntu.com/ubuntu impish-updates/main amd64 linux-libc-dev amd64 5.13.0-20.20 [1279 kB]
102 Mo réceptionnés en 21s (4769 ko/s)                                        
Sélection du paquet linux-modules-5.13.0-20-generic précédemment désélectionné.
(Lecture de la base de données... 194243 fichiers et répertoires déjà installés.
)
Préparation du dépaquetage de .../00-linux-modules-5.13.0-20-generic_5.13.0-20.2
0_amd64.deb ...
Dépaquetage de linux-modules-5.13.0-20-generic (5.13.0-20.20) ...
Sélection du paquet linux-image-5.13.0-20-generic précédemment désélectionné.
Préparation du dépaquetage de .../01-linux-image-5.13.0-20-generic_5.13.0-20.20_
amd64.deb ...
Dépaquetage de linux-image-5.13.0-20-generic (5.13.0-20.20) ...
Sélection du paquet linux-modules-extra-5.13.0-20-generic précédemment désélecti
onné.
Préparation du dépaquetage de .../02-linux-modules-extra-5.13.0-20-generic_5.13.
0-20.20_amd64.deb ...
Dépaquetage de linux-modules-extra-5.13.0-20-generic (5.13.0-20.20) ...
Préparation du dépaquetage de .../03-linux-generic_5.13.0.20.31_amd64.deb ...
Dépaquetage de linux-generic (5.13.0.20.31) sur (5.13.0.19.30) ...
Préparation du dépaquetage de .../04-linux-image-generic_5.13.0.20.31_amd64.deb 
...
Dépaquetage de linux-image-generic (5.13.0.20.31) sur (5.13.0.19.30) ...
Sélection du paquet linux-headers-5.13.0-20 précédemment désélectionné.
Préparation du dépaquetage de .../05-linux-headers-5.13.0-20_5.13.0-20.20_all.de
b ...
Dépaquetage de linux-headers-5.13.0-20 (5.13.0-20.20) ...
Sélection du paquet linux-headers-5.13.0-20-generic précédemment désélectionné.
Préparation du dépaquetage de .../06-linux-headers-5.13.0-20-generic_5.13.0-20.2
0_amd64.deb ...
Dépaquetage de linux-headers-5.13.0-20-generic (5.13.0-20.20) ...
Préparation du dépaquetage de .../07-linux-headers-generic_5.13.0.20.31_amd64.de
b ...
Dépaquetage de linux-headers-generic (5.13.0.20.31) sur (5.13.0.19.30) ...
Préparation du dépaquetage de .../08-linux-generic-hwe-20.04_5.13.0.20.31_amd64.
deb ...
Dépaquetage de linux-generic-hwe-20.04 (5.13.0.20.31) sur (5.13.0.19.30) ...
Préparation du dépaquetage de .../09-linux-image-generic-hwe-20.04_5.13.0.20.31_
amd64.deb ...
Dépaquetage de linux-image-generic-hwe-20.04 (5.13.0.20.31) sur (5.13.0.19.30) .
..
Préparation du dépaquetage de .../10-linux-headers-generic-hwe-20.04_5.13.0.20.3
1_amd64.deb ...
Dépaquetage de linux-headers-generic-hwe-20.04 (5.13.0.20.31) sur (5.13.0.19.30)
 ...
Préparation du dépaquetage de .../11-linux-libc-dev_5.13.0-20.20_amd64.deb ...
Dépaquetage de linux-libc-dev:amd64 (5.13.0-20.20) sur (5.13.0-19.19) ...
Paramétrage de linux-libc-dev:amd64 (5.13.0-20.20) ...
Paramétrage de linux-headers-5.13.0-20 (5.13.0-20.20) ...
Paramétrage de linux-headers-5.13.0-20-generic (5.13.0-20.20) ...
Paramétrage de linux-headers-generic (5.13.0.20.31) ...
Paramétrage de linux-headers-generic-hwe-20.04 (5.13.0.20.31) ...
Paramétrage de linux-image-5.13.0-20-generic (5.13.0-20.20) ...
I: /boot/vmlinuz.old is now a symlink to vmlinuz-5.13.0-19-generic
I: /boot/initrd.img.old is now a symlink to initrd.img-5.13.0-19-generic
I: /boot/vmlinuz is now a symlink to vmlinuz-5.13.0-20-generic
I: /boot/initrd.img is now a symlink to initrd.img-5.13.0-20-generic
Paramétrage de linux-modules-extra-5.13.0-20-generic (5.13.0-20.20) ...
Paramétrage de linux-modules-5.13.0-20-generic (5.13.0-20.20) ...
Paramétrage de linux-image-generic-hwe-20.04 (5.13.0.20.31) ...
Paramétrage de linux-image-generic (5.13.0.20.31) ...
Paramétrage de linux-generic (5.13.0.20.31) ...
Paramétrage de linux-generic-hwe-20.04 (5.13.0.20.31) ...
Traitement des actions différées (« triggers ») pour linux-image-5.13.0-20-gener
ic (5.13.0-20.20) ...
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-5.13.0-20-generic
/etc/kernel/postinst.d/zz-update-grub:
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/grub.d/init-select.cfg'
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-5.13.0-20-generic
Image mémoire initiale trouvée : /boot/initrd.img-5.13.0-20-generic
Image Linux trouvée : /boot/vmlinuz-5.13.0-19-generic
Image mémoire initiale trouvée : /boot/initrd.img-5.13.0-19-generic
Image Linux trouvée : /boot/vmlinuz-5.11.0-37-generic
Image mémoire initiale trouvée : /boot/initrd.img-5.11.0-37-generic
Adding boot menu entry for UEFI Firmware Settings
fait

Pas de nouveau crash pour le moment. je vous tient au courant.

Merci

Seiat

Hors ligne

#12 Le 20/10/2021, à 11:31

xubu1957

Re : crash aprés mise a niveau

Paramétrage de linux-generic-hwe-20.04 

Sur des versions 21.04 puis 21.10, c'est bizarre !

Fournis les noyaux présents :

echo; dpkg -l | awk '!/^rc/ && / linux-(c|g|h|i|lo|m|si|t)/{print $1,$2,$3,$4 | "sort -k3V | column -t"}' ; echo -e "\nNoyau courant : $(uname -mr)"

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#13 Le 20/10/2021, à 11:33

seiat2

Re : crash aprés mise a niveau

ii  linux-image-5.11.0-37-generic          5.11.0-37.41  amd64
ii  linux-modules-5.11.0-37-generic        5.11.0-37.41  amd64
ii  linux-modules-extra-5.11.0-37-generic  5.11.0-37.41  amd64
ii  linux-headers-5.13.0-19                5.13.0-19.19  all
ii  linux-headers-5.13.0-19-generic        5.13.0-19.19  amd64
ii  linux-image-5.13.0-19-generic          5.13.0-19.19  amd64
ii  linux-modules-5.13.0-19-generic        5.13.0-19.19  amd64
ii  linux-modules-extra-5.13.0-19-generic  5.13.0-19.19  amd64
ii  linux-headers-5.13.0-20                5.13.0-20.20  all
ii  linux-headers-5.13.0-20-generic        5.13.0-20.20  amd64
ii  linux-image-5.13.0-20-generic          5.13.0-20.20  amd64
ii  linux-modules-5.13.0-20-generic        5.13.0-20.20  amd64
ii  linux-modules-extra-5.13.0-20-generic  5.13.0-20.20  amd64
ii  linux-generic                          5.13.0.20.31  amd64
ii  linux-generic-hwe-20.04                5.13.0.20.31  amd64
ii  linux-headers-generic                  5.13.0.20.31  amd64
ii  linux-headers-generic-hwe-20.04        5.13.0.20.31  amd64
ii  linux-image-generic                    5.13.0.20.31  amd64
ii  linux-image-generic-hwe-20.04          5.13.0.20.31  amd64

Noyau courant : 5.13.0-19-generic x86_64

Hors ligne

#14 Le 20/10/2021, à 11:34

xubu1957

Re : crash aprés mise a niveau

Je vais demander un avis.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#15 Le 21/10/2021, à 17:33

seiat2

Re : crash aprés mise a niveau

Bonsoir

Je viens au nouvelles, hier aucun problèmes, j'ai pensée a un rétablissement total. Mais ce soir crash de nouveaux.... J'ai l'impression que le problème survient plus souvent si firefox est lancé ou lors du chargement d'une page (plusieurs crash juste après avoir cliqué sur "actualiser". Du coup l'idée d'un problème avec le wifi semble bonne.

A bientot
Seiat

Hors ligne

#16 Le 21/10/2021, à 17:37

xubu1957

Re : crash aprés mise a niveau

Bonjour,

Montre :

ls -l /var/crash

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#17 Le 21/10/2021, à 17:39

seiat2

Re : crash aprés mise a niveau

Je saurais pas dire si j'aime la réponse ou non...

total 0

Hors ligne

#18 Le 21/10/2021, à 17:47

xubu1957

Re : crash aprés mise a niveau

En lançant en commande :

firefox

ressort-il un message d'erreur ?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#19 Le 21/10/2021, à 18:02

seiat2

Re : crash aprés mise a niveau

Non absolument rien...

Hors ligne

#20 Le 30/10/2021, à 14:47

seiat2

Re : crash aprés mise a niveau

Bon pas de solutions..... je suis revenus  a la version LTS en attendant.

Ca fonctionne.

Merci quand même de votre participation!

Hors ligne