#1 Le 11/05/2021, à 17:02
- Kaaria
Démarrage PC très lent [Résolu]
Bonjour,
Je poste un message parce que depuis que j'ai changé la pile de ma carte mère (BIOS CMOS checksum error) la machine est très lente au démarrage.
Systemd :
karim@karim-G41MT-D3:~$ sudo systemd-analyze time
Startup finished in 3min 14.535s (kernel) + 44.267s (userspace) = 3min 58.802s
graphical.target reached after 44.254s in userspace
karim@karim-G41MT-D3:~$
karim@karim-G41MT-D3:~$ sudo systemd-analyze blame
13.237s dev-sda1.device
11.335s snapd.service
8.736s apparmor.service
8.538s systemd-journal-flush.service
7.549s networkd-dispatcher.service
6.802s NetworkManager.service
5.807s ModemManager.service
4.897s accounts-daemon.service
4.744s wpa_supplicant.service
4.319s dev-loop2.device
4.200s dev-loop5.device
4.187s dev-loop1.device
4.160s dev-loop4.device
4.001s dev-loop0.device
3.859s rsyslog.service
3.817s grub-common.service
3.559s systemd-resolved.service
3.541s dev-loop3.device
2.525s avahi-daemon.service
2.519s systemd-udevd.service
2.244s apt-daily.service
2.186s apport.service
2.177s lm-sensors.service
2.171s gpu-manager.service
2.040s udisks2.service
1.473s binfmt-support.service
1.470s systemd-modules-load.service
1.288s systemd-timesyncd.service
1.232s upower.service
1.213s keyboard-setup.service
1.181s systemd-sysctl.service
1.175s snap-core-10908.mount
1.153s console-setup.service
1.099s snap-core-10958.mount
1.070s systemd-tmpfiles-clean.service
1.070s snap-core18-1997.mount
1.049s lightdm.service
1.044s plymouth-quit-wait.service
1.001s systemd-logind.service
982ms systemd-tmpfiles-setup-dev.service
928ms snapd.seeded.service
654ms packagekit.service
585ms systemd-update-utmp.service
576ms snap-spotify-46.mount
455ms systemd-tmpfiles-setup.service
450ms polkit.service
427ms pppd-dns.service
344ms systemd-journald.service
342ms systemd-random-seed.service
336ms kerneloops.service
319ms snap-spotify-45.mount
316ms swapfile.swap
279ms systemd-rfkill.service
278ms hddtemp.service
271ms systemd-user-sessions.service
247ms snap-core18-1988.mount
246ms plymouth-start.service
236ms motd-news.service
224ms kmod-static-nodes.service
202ms alsa-restore.service
191ms snapd.apparmor.service
180ms user@1000.service
178ms setvtrgb.service
176ms systemd-remount-fs.service
134ms dev-mqueue.mount
131ms dev-hugepages.mount
129ms sys-kernel-debug.mount
75ms snapd.socket
72ms proc-sys-fs-binfmt_misc.mount
70ms systemd-udev-trigger.service
18ms ureadahead-stop.service
14ms ufw.service
11ms plymouth-read-write.service
9ms systemd-update-utmp-runlevel.service
4ms sys-fs-fuse-connections.mount
3ms sys-kernel-config.mount
lines 53-76/76 (END)
Le rapport boot-info :
boot-info-4ppa130 [20210511_1745]
============================== Boot Info Summary ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.5 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
================================ 1 OS detected =================================
OS#1: L'OS actuellement utilisé - Ubuntu 18.04.5 LTS CurrentSession on sda1
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-4.15.0-143-generic root=UUID=728cb687-14ff-4314-9eac-cece0e75513a ro quiet splash vt.handoff=1
===================================== UEFI =====================================
This installed-session is not in EFI-mode.
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sda : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sda1 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, farbios
Partitions info (2/3): _________________________________________________________
sda1 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sda1 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
fdisk -l (filtered): ___________________________________________________________
Disk sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 0x2ae6d1ba
Boot Start End Sectors Size Id Type
sda1 * 2048 1953523711 1953521664 931.5G 83 Linux
parted -lm (filtered): _________________________________________________________
sda:1000GB:scsi:512:4096:msdos:ATA WDC WD10EZEX-00W:;
1:1049kB:1000GB:1000GB:ext4::boot;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
fd0
sda
└─sda1 ext4 728cb687-14ff-4314-9eac-cece0e75513a 2ae6d1ba-01
df (filtered): _________________________________________________________________
Avail Use% Mounted on
sda1 220.8G 71% /
Mount options: __________________________________________________________________
sda1 rw,relatime,errors=remount-ro,data=ordered
====================== sda1/boot/grub/grub.cfg (filtered) ======================
Ubuntu 728cb687-14ff-4314-9eac-cece0e75513a
Ubuntu, avec Linux 4.15.0-143-generic 728cb687-14ff-4314-9eac-cece0e75513a
Ubuntu, avec Linux 4.15.0-142-generic 728cb687-14ff-4314-9eac-cece0e75513a
Ubuntu, avec Linux 4.15.0-140-generic 728cb687-14ff-4314-9eac-cece0e75513a
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
========================== sda1/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=728cb687-14ff-4314-9eac-cece0e75513a / ext4 errors=remount-ro 0 1
/swapfile none swap sw 0 0
======================= sda1/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sda1: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
773.159492493 = 830.173683712 boot/grub/grub.cfg 1
44.877059937 = 48.186376192 boot/grub/i386-pc/core.img 1
224.977542877 = 241.567797248 boot/vmlinuz-4.15.0-140-generic 2
331.813526154 = 356.282060800 boot/vmlinuz-4.15.0-142-generic 1
347.243217468 = 372.849565696 boot/vmlinuz-4.15.0-143-generic 2
347.243217468 = 372.849565696 vmlinuz 2
331.813526154 = 356.282060800 vmlinuz.old 1
350.069087982 = 375.883821056 boot/initrd.img-4.15.0-140-generic 4
911.781166077 = 979.017572352 boot/initrd.img-4.15.0-142-generic 2
348.968669891 = 374.702256128 boot/initrd.img-4.15.0-143-generic 3
348.968669891 = 374.702256128 initrd.img 3
911.781166077 = 979.017572352 initrd.img.old 2
===================== sda1: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 12808 août 24 2020 10_linux
-rwxr-xr-x 1 root root 11298 mars 4 2018 20_linux_xen
-rwxr-xr-x 1 root root 12059 oct. 12 2017 30_os-prober
-rwxr-xr-x 1 root root 1418 oct. 12 2017 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct. 12 2017 40_custom
-rwxr-xr-x 1 root root 216 oct. 12 2017 41_custom
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would reinstall the grub2 of
sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
Merci d'avance pour vos réponses.
Dernière modification par Kaaria (Le 17/05/2021, à 12:15)
Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio
Hors ligne
#2 Le 11/05/2021, à 17:35
- iznobe
Re : Démarrage PC très lent [Résolu]
Bonjour ,
Disk sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 0x2ae6d1ba
Boot Start End Sectors Size Id Type
sda1 * 2048 1953523711 1953521664 931.5G 83 Linux
juste une question comme ca , c ' est normal que la fin de la partition sda1 se termine en secteur 1953523711 alors que le nombre de secteurs totaux du disque n ' est que de 1953521664 ?
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#3 Le 12/05/2021, à 13:07
- Kaaria
Re : Démarrage PC très lent [Résolu]
Bonjour ,
Disk sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors Disk identifier: 0x2ae6d1ba Boot Start End Sectors Size Id Type sda1 * 2048 1953523711 1953521664 931.5G 83 Linux
juste une question comme ca , c ' est normal que la fin de la partition sda1 se termine en secteur 1953523711 alors que le nombre de secteurs totaux du disque n ' est que de 1953521664 ?
Je sais pas du tout.
Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio
Hors ligne
#4 Le 12/05/2021, à 13:59
- geole
Re : Démarrage PC très lent [Résolu]
Bonjour
C'est normal, Ne pas confondre le nombre total de secteurs du disques
Disk sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
avec le nombre total de secteurs de la partition!
sda1 * 2048 1953523711 1953521664 931.5G 83 Linux
Souvent on utilise gparted qui aligne au Mio près. soit donc 2048 secteurs
Ici, il y donc 1457 secteurs en fin de disque non utilisés.
Mais en début de disque, il y en a beaucoup plus près de 2048 qui ne sont pas alloués. La différence étant de 2047.
Pour traiter ce problème, il aurait fallu utiliser l'application Disques et penser à mettre unité de mesure sur le Kio au lieu du Go
Dernière modification par geole (Le 12/05/2021, à 14:02)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#5 Le 12/05/2021, à 14:05
- geole
Re : Démarrage PC très lent [Résolu]
Bonjour
Pour les temps de démarrage, ajoute aussi ces retours
systemd-analyze critical-chain
journalctl -b --no-pager -p err
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#6 Le 12/05/2021, à 14:20
- iznobe
Re : Démarrage PC très lent [Résolu]
@geole effectivement , si on considere que c' est le numero de secteur final de la partition ca se tient , une difference exacte de 2047 secteurs + le numero 0 ( 2048 donc ) , j' aurais du tilter
Pour en revenir au probleme initial , le fait que ta pile etait morte et que tu as du la changer , ca veut dire que tout les parametres de ton BIOS sont repassés a leur valeur par defaut .
La premiere chose a faire , c ' est de redemarrer et reregler entierement les parametres du BIOS ( les verifier du moins ), a commencer par ceux du processeur de la memoire et du mode de disque et de sauvegarder ceux-ci avant de quitter .
ATTENTION : il ne faut pas changer des trucs au pif
Pour commencer tu pourrais donner le retour de :
sudo lshw -sanitize
, afin qu ' on ait une idée des composants materiels de ta machine , grace a ca on pourras te guider si tu as des questions sur les options de ton BIOS .
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#7 Le 12/05/2021, à 23:20
- Kaaria
Re : Démarrage PC très lent [Résolu]
Bonjour
Pour les temps de démarrage, ajoute aussi ces retourssystemd-analyze critical-chain
journalctl -b --no-pager -p err
Bonjour,
karim@karim-G41MT-D3:~$ systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @51.664s
└─multi-user.target @25.765s
└─snapd.seeded.service @25.571s +192ms
└─snapd.service @20.351s +5.218s
└─basic.target @19.625s
└─sockets.target @19.625s
└─snapd.socket @19.568s +56ms
└─sysinit.target @19.525s
└─systemd-timesyncd.service @19.407s +118ms
└─systemd-tmpfiles-setup.service @18.318s +1.053s
└─systemd-journal-flush.service @3.119s +15.196s
└─systemd-journald.service @2.345s +773ms
└─systemd-journald.socket @2.315s
└─system.slice @2.315s
└─-.slice @2.287s
karim@karim-G41MT-D3:~$ journalctl -b --no-pager -p err
-- Logs begin at Sat 2021-04-10 00:03:55 CEST, end at Thu 2021-05-13 00:19:29 CEST. --
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:27 karim-G41MT-D3 lightdm[799]: PAM unable to dlopen(pam_gnome_keyring.so): /lib/security/pam_gnome_keyring.so: cannot open shared object file: No such file or directory
mai 12 14:05:27 karim-G41MT-D3 lightdm[799]: PAM adding faulty module: pam_gnome_keyring.so
mai 12 14:05:27 karim-G41MT-D3 lightdm[799]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
mai 12 14:05:27 karim-G41MT-D3 lightdm[799]: PAM adding faulty module: pam_kwallet.so
mai 12 14:05:27 karim-G41MT-D3 lightdm[799]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
mai 12 14:05:27 karim-G41MT-D3 lightdm[799]: PAM adding faulty module: pam_kwallet5.so
mai 12 14:05:27 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:30 karim-G41MT-D3 lightdm[928]: PAM unable to dlopen(pam_gnome_keyring.so): /lib/security/pam_gnome_keyring.so: cannot open shared object file: No such file or directory
mai 12 14:05:30 karim-G41MT-D3 lightdm[928]: PAM adding faulty module: pam_gnome_keyring.so
mai 12 14:05:30 karim-G41MT-D3 lightdm[928]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
mai 12 14:05:30 karim-G41MT-D3 lightdm[928]: PAM adding faulty module: pam_kwallet.so
mai 12 14:05:30 karim-G41MT-D3 lightdm[928]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
mai 12 14:05:30 karim-G41MT-D3 lightdm[928]: PAM adding faulty module: pam_kwallet5.so
mai 12 14:05:40 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:41 karim-G41MT-D3 pulseaudio[2594]: [pulseaudio] pid.c: Daemon already running.
mai 12 14:05:52 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:52 karim-G41MT-D3 systemd[1]: Failed to start Disk Manager.
mai 12 14:06:06 karim-G41MT-D3 pulseaudio[2517]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
karim@karim-G41MT-D3:~$
Dernière modification par Kaaria (Le 12/05/2021, à 23:21)
Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio
Hors ligne
#8 Le 12/05/2021, à 23:24
- Kaaria
Re : Démarrage PC très lent [Résolu]
@geole effectivement , si on considere que c' est le numero de secteur final de la partition ca se tient , une difference exacte de 2047 secteurs + le numero 0 ( 2048 donc ) , j' aurais du tilter
Pour en revenir au probleme initial , le fait que ta pile etait morte et que tu as du la changer , ca veut dire que tout les parametres de ton BIOS sont repassés a leur valeur par defaut .
La premiere chose a faire , c ' est de redemarrer et reregler entierement les parametres du BIOS ( les verifier du moins ), a commencer par ceux du processeur de la memoire et du mode de disque et de sauvegarder ceux-ci avant de quitter .
ATTENTION : il ne faut pas changer des trucs au pif
Pour commencer tu pourrais donner le retour de :sudo lshw -sanitize
, afin qu ' on ait une idée des composants materiels de ta machine , grace a ca on pourras te guider si tu as des questions sur les options de ton BIOS .
Bonjour,
Je donne le retour:
karim@karim-G41MT-D3:~$ sudo lshw -sanitize
[sudo] Mot de passe de karim :
computer
description: Ordinateur de Bureau
produit: G41MT-D3
fabriquant: Gigabyte Technology Co., Ltd.
bits: 64 bits
fonctionnalités: smbios-2.4 dmi-2.4 smp vsyscall32
configuration: boot=normal chassis=desktop uuid=[REMOVED]
*-core
description: Carte mère
produit: G41MT-D3
fabriquant: Gigabyte Technology Co., Ltd.
identifiant matériel: 0
version: x.x
*-firmware
description: BIOS
fabriquant: Award Software International, Inc.
identifiant matériel: 0
version: F1
date: 05/04/2010
taille: 128KiB
capacité: 960KiB
fonctionnalités: pci pnp apm upgrade shadowing cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu
description: CPU
produit: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz
fabriquant: Intel Corp.
identifiant matériel: 4
information bus: cpu@0
version: Pentium(R) Dual-Core CPU E5
emplacement: Socket 775
taille: 1486MHz
capacité: 4GHz
bits: 64 bits
horloge: 200MHz
fonctionnalités: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm pti tpr_shadow vnmi flexpriority dtherm cpufreq
*-cache:0
description: L1 cache
identifiant matériel: a
emplacement: Internal Cache
taille: 64KiB
capacité: 64KiB
fonctionnalités: synchronous internal write-back
configuration: level=1
*-cache:1
description: L2 cache
identifiant matériel: b
emplacement: External Cache
taille: 2MiB
capacité: 2MiB
fonctionnalités: synchronous internal write-back
configuration: level=2
*-memory
description: Mémoire Système
identifiant matériel: 19
emplacement: Carte mère
taille: 2GiB
*-bank:0
description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) 400 MHz (2,5 ns)
identifiant matériel: 0
emplacement: A0
taille: 2GiB
bits: 2244 bits
horloge: 400MHz (2.5ns)
*-bank:1
description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) [vide]
identifiant matériel: 1
emplacement: A1
*-bank:2
description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) [vide]
identifiant matériel: 2
emplacement: A2
*-bank:3
description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) [vide]
identifiant matériel: 3
emplacement: A3
*-pci
description: Host bridge
produit: 4 Series Chipset DRAM Controller
fabriquant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 03
bits: 32 bits
horloge: 33MHz
*-pci:0
description: PCI bridge
produit: 4 Series Chipset PCI Express Root Port
fabriquant: Intel Corporation
identifiant matériel: 1
information bus: pci@0000:00:01.0
version: 03
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:16 portE/S:c000(taille=4096) mémoire:fdc00000-fdcfffff portE/S:d0000000(taille=268435456)
*-display
description: VGA compatible controller
produit: RV710 [Radeon HD 4350/4550]
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
ressources: irq:27 mémoire:d0000000-dfffffff mémoire:fdce0000-fdceffff portE/S:ce00(taille=256) mémoire:c0000-dffff
*-multimedia
description: Audio device
produit: RV710/730 HDMI Audio [Radeon HD 4000 series]
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 0.1
information bus: pci@0000:01:00.1
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm pciexpress msi bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:26 mémoire:fdcfc000-fdcfffff
*-multimedia
description: Audio device
produit: NM10/ICH7 Family High Definition Audio Controller
fabriquant: Intel Corporation
identifiant matériel: 1b
information bus: pci@0000:00:1b.0
version: 01
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:25 mémoire:fdff8000-fdffbfff
*-pci:1
description: PCI bridge
produit: NM10/ICH7 Family PCI Express Port 1
fabriquant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: 01
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:16 portE/S:1000(taille=4096) mémoire:7ff00000-800fffff portE/S:80100000(taille=2097152)
*-pci:2
description: PCI bridge
produit: NM10/ICH7 Family PCI Express Port 2
fabriquant: Intel Corporation
identifiant matériel: 1c.1
information bus: pci@0000:00:1c.1
version: 01
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:17 portE/S:d000(taille=4096) mémoire:80300000-806fffff portE/S:fdd00000(taille=1048576)
*-network
description: Ethernet interface
produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:03:00.0
nom logique: enp3s0
version: 06
numéro de série: [REMOVED]
taille: 10Mbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s
ressources: irq:17 portE/S:de00(taille=256) mémoire:fddff000-fddfffff mémoire:fddf8000-fddfbfff
*-usb:0
description: USB controller
produit: NM10/ICH7 Family USB UHCI Controller #1
fabriquant: Intel Corporation
identifiant matériel: 1d
information bus: pci@0000:00:1d.0
version: 01
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master
configuration: driver=uhci_hcd latency=0
ressources: irq:23 portE/S:ff00(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.15.0-143-generic uhci_hcd
identifiant matériel: 1
information bus: usb@2
nom logique: usb2
version: 4.15
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:1
description: USB controller
produit: NM10/ICH7 Family USB UHCI Controller #2
fabriquant: Intel Corporation
identifiant matériel: 1d.1
information bus: pci@0000:00:1d.1
version: 01
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master
configuration: driver=uhci_hcd latency=0
ressources: irq:19 portE/S:fe00(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.15.0-143-generic uhci_hcd
identifiant matériel: 1
information bus: usb@3
nom logique: usb3
version: 4.15
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:2
description: USB controller
produit: NM10/ICH7 Family USB UHCI Controller #3
fabriquant: Intel Corporation
identifiant matériel: 1d.2
information bus: pci@0000:00:1d.2
version: 01
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master
configuration: driver=uhci_hcd latency=0
ressources: irq:18 portE/S:fd00(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.15.0-143-generic uhci_hcd
identifiant matériel: 1
information bus: usb@4
nom logique: usb4
version: 4.15
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:3
description: USB controller
produit: NM10/ICH7 Family USB UHCI Controller #4
fabriquant: Intel Corporation
identifiant matériel: 1d.3
information bus: pci@0000:00:1d.3
version: 01
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master
configuration: driver=uhci_hcd latency=0
ressources: irq:16 portE/S:fc00(taille=32)
*-usbhost
produit: UHCI Host Controller
fabriquant: Linux 4.15.0-143-generic uhci_hcd
identifiant matériel: 1
information bus: usb@5
nom logique: usb5
version: 4.15
fonctionnalités: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:0
description: Clavier
produit: Microsoft Nano Transceiver 1.1
fabriquant: Microsoft
identifiant matériel: 1
information bus: usb@5:1
version: 3.15
fonctionnalités: usb-2.00
configuration: driver=usbhid maxpower=100mA speed=12Mbit/s
*-usb:1
description: Clavier
produit: USB Multimedia Keyboard
fabriquant: BTC
identifiant matériel: 2
information bus: usb@5:2
version: 1.00
fonctionnalités: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=1Mbit/s
*-usb:4
description: USB controller
produit: NM10/ICH7 Family USB2 EHCI Controller
fabriquant: Intel Corporation
identifiant matériel: 1d.7
information bus: pci@0000:00:1d.7
version: 01
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
ressources: irq:23 mémoire:fdfff000-fdfff3ff
*-usbhost
produit: EHCI Host Controller
fabriquant: Linux 4.15.0-143-generic ehci_hcd
identifiant matériel: 1
information bus: usb@1
nom logique: usb1
version: 4.15
fonctionnalités: usb-2.00
configuration: driver=hub slots=8 speed=480Mbit/s
*-pci:3
description: PCI bridge
produit: 82801 PCI Bridge
fabriquant: Intel Corporation
identifiant matériel: 1e
information bus: pci@0000:00:1e.0
version: e1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci subtractive_decode bus_master cap_list
ressources: mémoire:fde00000-fdefffff
*-network
description: Interface réseau sans fil
produit: RT2561/RT61 rev B 802.11g
fabriquant: Ralink corp.
identifiant matériel: 1
information bus: pci@0000:04:01.0
nom logique: wlp4s1
version: 00
numéro de série: [REMOVED]
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=rt61pci driverversion=4.15.0-143-generic firmware=0.8 ip=[REMOVED] latency=32 link=yes multicast=yes wireless=IEEE 802.11
ressources: irq:19 mémoire:fdef8000-fdefffff
*-isa
description: ISA bridge
produit: 82801GB/GR (ICH7 Family) LPC Interface Bridge
fabriquant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 01
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
ressources: irq:0
*-ide
description: IDE interface
produit: NM10/ICH7 Family SATA Controller [IDE mode]
fabriquant: Intel Corporation
identifiant matériel: 1f.2
information bus: pci@0000:00:1f.2
version: 01
bits: 32 bits
horloge: 66MHz
fonctionnalités: ide pm isa_compatibility_mode_controller__supports_both_channels_switched_to_pci_native_mode__supports_bus_mastering bus_master cap_list
configuration: driver=ata_piix latency=0
ressources: irq:19 portE/S:1f0(taille=8) portE/S:3f6 portE/S:170(taille=8) portE/S:376 portE/S:f900(taille=16)
*-serial NON-RÉCLAMÉ
description: SMBus
produit: NM10/ICH7 Family SMBus Controller
fabriquant: Intel Corporation
identifiant matériel: 1f.3
information bus: pci@0000:00:1f.3
version: 01
bits: 32 bits
horloge: 33MHz
configuration: latency=0
ressources: portE/S:500(taille=32)
*-scsi:0
identifiant matériel: 1
nom logique: scsi0
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: WDC WD10EZEX-00W
fabriquant: Western Digital
identifiant matériel: 0.0.0
information bus: scsi@0:0.0.0
nom logique: /dev/sda
version: 1A01
numéro de série: [REMOVED]
taille: 931GiB (1TB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=4096 signature=2ae6d1ba
*-volume
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@0:0.0.0,1
nom logique: /dev/sda1
nom logique: /
version: 1.0
numéro de série: [REMOVED]
taille: 931GiB
capacité: 931GiB
fonctionnalités: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
configuration: created=2018-01-19 18:42:12 filesystem=ext4 lastmountpoint=/ modified=2021-05-12 14:04:59 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2021-05-12 14:05:03 state=mounted
*-scsi:1
identifiant matériel: 2
nom logique: scsi1
fonctionnalités: emulated
*-cdrom
description: DVD-RAM writer
produit: CDDVDW SH-S223C
fabriquant: TSSTcorp
identifiant matériel: 0.0.0
information bus: scsi@1:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/cdrw
nom logique: /dev/dvd
nom logique: /dev/dvdrw
nom logique: /dev/sr0
version: SB04
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
karim@karim-G41MT-D3:~$
Dernière modification par Kaaria (Le 12/05/2021, à 23:28)
Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio
Hors ligne
#9 Le 13/05/2021, à 06:22
- iznobe
Re : Démarrage PC très lent [Résolu]
Tu as vu quelquechose dans le BIOS qui pourrait faire que ta machine soit plus lente que la normale ?
il n' est pas vraiment de premiere jeunesse cet ordi , et a priori seulement 2 Go de RAM .
il va falloir envisager un renouvellement ou bien trouver une distribution tres peu gourmande en ressources .
Dernière modification par iznobe (Le 13/05/2021, à 06:24)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#10 Le 13/05/2021, à 06:27
- xubu1957
Re : Démarrage PC très lent [Résolu]
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#11 Le 13/05/2021, à 08:32
- iznobe
Re : Démarrage PC très lent [Résolu]
Bonjour , merci@xubu1957 , c ' est donc deja une variante legere
dans le reour d' erreur du journal on y voit quand meme pas mal de soucis :
karim@karim-G41MT-D3:~$ journalctl -b --no-pager -p err
-- Logs begin at Sat 2021-04-10 00:03:55 CEST, end at Thu 2021-05-13 00:19:29 CEST. --
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:03 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:27 karim-G41MT-D3 lightdm[799]: PAM unable to dlopen(pam_gnome_keyring.so): /lib/security/pam_gnome_keyring.so: cannot open shared object file: No such file or directory
mai 12 14:05:27 karim-G41MT-D3 lightdm[799]: PAM adding faulty module: pam_gnome_keyring.so
mai 12 14:05:27 karim-G41MT-D3 lightdm[799]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
mai 12 14:05:27 karim-G41MT-D3 lightdm[799]: PAM adding faulty module: pam_kwallet.so
mai 12 14:05:27 karim-G41MT-D3 lightdm[799]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
mai 12 14:05:27 karim-G41MT-D3 lightdm[799]: PAM adding faulty module: pam_kwallet5.so
mai 12 14:05:27 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:30 karim-G41MT-D3 lightdm[928]: PAM unable to dlopen(pam_gnome_keyring.so): /lib/security/pam_gnome_keyring.so: cannot open shared object file: No such file or directory
mai 12 14:05:30 karim-G41MT-D3 lightdm[928]: PAM adding faulty module: pam_gnome_keyring.so
mai 12 14:05:30 karim-G41MT-D3 lightdm[928]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
mai 12 14:05:30 karim-G41MT-D3 lightdm[928]: PAM adding faulty module: pam_kwallet.so
mai 12 14:05:30 karim-G41MT-D3 lightdm[928]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
mai 12 14:05:30 karim-G41MT-D3 lightdm[928]: PAM adding faulty module: pam_kwallet5.so
mai 12 14:05:40 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:41 karim-G41MT-D3 pulseaudio[2594]: [pulseaudio] pid.c: Daemon already running.
mai 12 14:05:52 karim-G41MT-D3 kernel: print_req_error: I/O error, dev fd0, sector 0
mai 12 14:05:52 karim-G41MT-D3 systemd[1]: Failed to start Disk Manager.
mai 12 14:06:06 karim-G41MT-D3 pulseaudio[2517]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
karim@karim-G41MT-D3:~$
notament des inputs ouputs errors , il serait sage de donner le rapport smart du disque sda :
sudo apt install smartmontools --no-install-recommends
puis :
sudo smartctl -a /dev/sda
si tu as une disquette ou un cdrom ou un autre peripherique inseré , tu devrais le retiré pour demarrer et faire tes test .. surtout que la disquette parait " morte " ou tres tres tres fatiguée .
Si tu as un lecteur de disquette sans disquette inserée , tu devrais le debranché de la carte mere .
Dernière modification par iznobe (Le 13/05/2021, à 09:25)
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#12 Le 13/05/2021, à 08:46
- geole
Re : Démarrage PC très lent [Résolu]
Bonjour.
Si tu n'as pas de disquettes, tu pourrais commenter la description du lecteur de disquettes dans le fichier /etc/fstab, afin de supprimer les messages d'erreur du périphérique fd0. Mais ce n'est pas la cause de la lenteur.
Je n'ai pas d'idées pour la lenteur. Peux-tu donner ce long retour.
dmesg
Dernière modification par geole (Le 13/05/2021, à 08:51)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#13 Le 13/05/2021, à 09:00
- xubu1957
Re : Démarrage PC très lent [Résolu]
Bonjour,
Montre aussi d'éventuels paquets cassés :
dpkg -l | grep -v ^ii
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#14 Le 13/05/2021, à 09:28
- iznobe
Re : Démarrage PC très lent [Résolu]
c ' est vrai que pas grand chose d ' exploitable a part :
mai 12 14:05:52 karim-G41MT-D3 systemd[1]: Failed to start Disk Manager.
curieux qu ' il n ' arrive pas a demarrer ce service .
retour COMPLET et utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#15 Le 13/05/2021, à 11:23
- Kaaria
Re : Démarrage PC très lent [Résolu]
Bonjour,
Effectivement, la machine a un peu plus de 10 ans, j'ai seulement changé le disque dur y'a 2 ou 3 ans.
La distribution c'est Lubuntu donc ça va être difficile de faire plus léger. Avec une barrette de RAM en plus ça tournerait un peu mieux.
Côté BIOS j'y connais rien en paramétrage, j'ai seulement fait un "Load Optimized-Defaults" comme recommandé dans le manuel.
Je donne les retours:
smartctl
karim@karim-G41MT-D3:~$ sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-143-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD10EZEX-00WN4A0
Serial Number: WD-WCC6Y1FYP1S4
LU WWN Device Id: 5 0014ee 2626db716
Firmware Version: 01.01A01
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu May 13 12:17:55 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (11100) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 170 166 021 Pre-fail Always - 2466
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1240
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 15741
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1238
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 15
193 Load_Cycle_Count 0x0032 196 196 000 Old_age Always - 13394
194 Temperature_Celsius 0x0022 110 092 000 Old_age Always - 33
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
karim@karim-G41MT-D3:~$
dmesg
1
[ 0.844967] usb usb3: Product: UHCI Host Controller
[ 0.844968] usb usb3: Manufacturer: Linux 4.15.0-143-generic uhci_hcd
[ 0.844969] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.845053] hub 3-0:1.0: USB hub found
[ 0.845058] hub 3-0:1.0: 2 ports detected
[ 0.845222] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.845228] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.845233] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.845254] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[ 0.845297] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.845299] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.845300] usb usb4: Product: UHCI Host Controller
[ 0.845301] usb usb4: Manufacturer: Linux 4.15.0-143-generic uhci_hcd
[ 0.845302] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.845383] hub 4-0:1.0: USB hub found
[ 0.845388] hub 4-0:1.0: 2 ports detected
[ 0.845540] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.845544] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.845549] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.845571] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 0.845611] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.845612] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.845613] usb usb5: Product: UHCI Host Controller
[ 0.845614] usb usb5: Manufacturer: Linux 4.15.0-143-generic uhci_hcd
[ 0.845616] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.845698] hub 5-0:1.0: USB hub found
[ 0.845704] hub 5-0:1.0: 2 ports detected
[ 0.845837] i8042: PNP: No PS/2 controller found.
[ 0.845837] i8042: Probing ports directly.
[ 0.878482] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.878483] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 0.980293] ata2.01: NODEV after polling detection
[ 0.982637] ata1.00: ATA-10: WDC WD10EZEX-00WN4A0, 01.01A01, max UDMA/133
[ 0.982640] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.982712] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB04, max UDMA/100
[ 0.985414] ata1.00: configured for UDMA/133
[ 0.985695] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-00W 1A01 PQ: 0 ANSI: 5
[ 0.985875] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.985877] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.985878] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.985890] sd 0:0:0:0: [sda] Write Protect is off
[ 0.985891] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.985911] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.987458] ata2.00: configured for UDMA/100
[ 0.990321] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB04 PQ: 0 ANSI: 5
[ 1.012781] sda: sda1
[ 1.013115] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.046479] sr 1:0:0:0: [sr0] scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.046482] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.046657] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.046717] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.152116] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.152228] mousedev: PS/2 mouse device common for all mice
[ 1.152357] rtc_cmos 00:01: RTC can wake from S4
[ 1.152457] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.152480] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.152489] i2c /dev entries driver
[ 1.152555] device-mapper: uevent: version 1.0.3
[ 1.152628] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.152653] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.152995] NET: Registered protocol family 10
[ 1.157130] Segment Routing with IPv6
[ 1.157158] NET: Registered protocol family 17
[ 1.157194] Key type dns_resolver registered
[ 1.157365] mce: Using 6 MCE banks
[ 1.157379] RAS: Correctable Errors collector initialized.
[ 1.157426] microcode: sig=0x1067a, pf=0x1, revision=0xa0b
[ 1.157466] microcode: Microcode Update Driver: v2.2.
[ 1.157477] sched_clock: Marking stable (1157461918, 0)->(1133670368, 23791550)
[ 1.157646] registered taskstats version 1
[ 1.157658] Loading compiled-in X.509 certificates
[ 1.160386] Loaded X.509 cert 'Build time autogenerated kernel key: de118354fe72448b469776565e76ac30c08e8db2'
[ 1.161267] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 1.162144] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 1.162170] zswap: loaded using pool lzo/zbud
[ 1.165683] Key type big_key registered
[ 1.165688] Key type trusted registered
[ 1.167381] Key type encrypted registered
[ 1.167384] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.167388] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.167393] ima: Allocated hash algorithm: sha1
[ 1.167412] evm: HMAC attrs: 0x1
[ 1.167649] Magic number: 5:989:21
[ 1.167794] rtc_cmos 00:01: setting system clock to 2021-05-13 10:01:48 UTC (1620900108)
[ 1.168172] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.168173] EDD information not available.
[ 1.171533] Freeing unused kernel image memory: 2444K
[ 1.184157] Write protecting the kernel read-only data: 20480k
[ 1.185268] Freeing unused kernel image memory: 2008K
[ 1.186166] Freeing unused kernel image memory: 1828K
[ 1.195077] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.195151] x86/mm: Checking user space page tables
[ 1.204083] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.300821] Floppy drive(s): fd0 is 1.44M
[ 1.323976] FDC 0 is a post-1991 82077
[ 1.336956] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.336974] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.337432] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0x (ptrval), 6c:f0:49:cb:32:71, XID 0c200000 IRQ 24
[ 1.337434] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.363352] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.384091] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 1.786104] usb 5-1: New USB device found, idVendor=045e, idProduct=07fd
[ 1.786108] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.786112] usb 5-1: Product: Microsoft Nano Transceiver 1.1
[ 1.786115] usb 5-1: Manufacturer: Microsoft
[ 1.792071] tsc: Refined TSC clocksource calibration: 2999.927 MHz
[ 1.792077] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e00ac764, max_idle_ns: 440795283505 ns
[ 1.794027] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.804363] usbcore: registered new interface driver usbhid
[ 1.804365] usbhid: USB HID core driver
[ 1.807121] input: Microsoft Microsoft Nano Transceiver 1.1 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:045E:07FD.0001/input/input3
[ 1.864240] hid-generic 0003:045E:07FD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft Nano Transceiver 1.1] on usb-0000:00:1d.3-1/input0
[ 1.864726] input: Microsoft Microsoft Nano Transceiver 1.1 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:045E:07FD.0002/input/input4
[ 1.924256] hid-generic 0003:045E:07FD.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Microsoft Microsoft Nano Transceiver 1.1] on usb-0000:00:1d.3-1/input1
[ 1.924462] input: Microsoft Microsoft Nano Transceiver 1.1 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.2/0003:045E:07FD.0003/input/input5
[ 1.924554] hid-generic 0003:045E:07FD.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Nano Transceiver 1.1] on usb-0000:00:1d.3-1/input2
[ 2.412065] usb 5-2: new low-speed USB device number 3 using uhci_hcd
[ 2.607101] usb 5-2: New USB device found, idVendor=046d, idProduct=c312
[ 2.607105] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.607109] usb 5-2: Product: USB Multimedia Keyboard
[ 2.607111] usb 5-2: Manufacturer: BTC
[ 2.625576] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/0003:046D:C312.0004/input/input6
[ 2.684215] hid-generic 0003:046D:C312.0004: input,hidraw3: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1d.3-2/input0
[ 2.710655] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/0003:046D:C312.0005/input/input7
[ 2.768246] hid-generic 0003:046D:C312.0005: input,hiddev1,hidraw4: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1d.3-2/input1
[ 2.816147] clocksource: Switched to clocksource tsc
[ 10.460686] random: fast init done
[ 14.016959] print_req_error: I/O error, dev fd0, sector 0
[ 14.016967] floppy: error 10 while reading block 0
[ 14.017069] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 56.416396] print_req_error: I/O error, dev fd0, sector 0
[ 56.416403] floppy: error 10 while reading block 0
[ 68.764434] print_req_error: I/O error, dev fd0, sector 0
[ 68.764440] floppy: error 10 while reading block 0
[ 81.116381] print_req_error: I/O error, dev fd0, sector 0
[ 81.116388] floppy: error 10 while reading block 0
[ 93.464388] print_req_error: I/O error, dev fd0, sector 0
[ 93.464396] floppy: error 10 while reading block 0
[ 106.812439] print_req_error: I/O error, dev fd0, sector 0
[ 106.812446] floppy: error 10 while reading block 0
[ 119.156362] print_req_error: I/O error, dev fd0, sector 0
[ 119.156368] floppy: error 10 while reading block 0
[ 119.156392] random: crng init done
[ 131.492362] print_req_error: I/O error, dev fd0, sector 0
[ 131.492369] floppy: error 10 while reading block 0
[ 143.864438] print_req_error: I/O error, dev fd0, sector 0
[ 143.864445] floppy: error 10 while reading block 0
[ 156.200414] print_req_error: I/O error, dev fd0, sector 0
[ 156.200421] floppy: error 10 while reading block 0
[ 168.568449] print_req_error: I/O error, dev fd0, sector 0
[ 168.568456] floppy: error 10 while reading block 0
[ 180.932972] print_req_error: I/O error, dev fd0, sector 0
[ 180.932979] floppy: error 10 while reading block 0
[ 193.304666] print_req_error: I/O error, dev fd0, sector 0
[ 193.304673] floppy: error 10 while reading block 0
[ 193.473620] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 194.777809] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 194.871624] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 194.888196] systemd[1]: Detected architecture x86-64.
[ 194.899691] systemd[1]: Set hostname to <karim-G41MT-D3>.
[ 196.777993] systemd[1]: Reached target User and Group Name Lookups.
[ 196.778071] systemd[1]: Reached target Remote File Systems.
[ 196.778274] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 196.778329] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 196.778531] systemd[1]: Created slice User and Session Slice.
[ 196.778680] systemd[1]: Created slice System Slice.
[ 196.778768] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 197.012577] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 197.347484] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
[ 197.389338] systemd-journald[268]: Received request to flush runtime journal from PID 1
[ 197.707328] lp: driver loaded but no devices found
[ 197.739518] ppdev: user-space parallel port driver
[ 197.797820] parport_pc 00:05: reported by Plug and Play ACPI
[ 197.797890] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 197.896184] lp0: using parport0 (interrupt-driven).
[ 209.837412] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 209.864277] intel_rng: FWH not detected
[ 209.906962] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20170831/utaddress-247)
[ 209.906969] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20170831/utaddress-247)
[ 209.906972] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 209.907000] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 209.909411] leds_ss4200: no LED devices found
[ 209.919236] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 209.932944] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 209.948862] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 209.965196] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[ 209.967965] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 209.967967] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 209.967968] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 209.967970] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 209.967971] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 209.967972] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 209.967974] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 209.967975] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 209.967977] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 209.967978] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
[ 209.967979] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f
[ 209.989312] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 209.989376] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 209.989435] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 209.989495] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 210.075159] audit: type=1400 audit(1620900317.400:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=395 comm="apparmor_parser"
[ 210.075165] audit: type=1400 audit(1620900317.400:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=395 comm="apparmor_parser"
[ 210.082407] audit: type=1400 audit(1620900317.408:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=396 comm="apparmor_parser"
[ 210.082411] audit: type=1400 audit(1620900317.408:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=396 comm="apparmor_parser"
[ 210.082413] audit: type=1400 audit(1620900317.408:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=396 comm="apparmor_parser"
[ 210.082415] audit: type=1400 audit(1620900317.408:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=396 comm="apparmor_parser"
[ 210.083070] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c
[ 210.098079] audit: type=1400 audit(1620900317.424:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=401 comm="apparmor_parser"
[ 210.098083] audit: type=1400 audit(1620900317.424:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=401 comm="apparmor_parser"
[ 210.098086] audit: type=1400 audit(1620900317.424:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=401 comm="apparmor_parser"
[ 210.106369] audit: type=1400 audit(1620900317.432:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=397 comm="apparmor_parser"
[ 210.110374] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 210.153509] intel_powerclamp: No package C-state available
[ 210.156605] [drm] radeon kernel modesetting enabled.
[ 210.156667] checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
[ 210.156668] fb: switching to radeondrmfb from VESA VGA
[ 210.156723] Console: switching to colour dummy device 80x25
[ 210.157166] [drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x1458:0x21ED 0x00).
[ 210.157202] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than pnp 00:08 [mem 0x000cf600-0x000cffff]
[ 210.157206] caller pci_map_rom+0x5d/0xf0 mapping multiple BARs
[ 210.157275] ATOM BIOS: GV
[ 210.157305] radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (128M used)
[ 210.157306] radeon 0000:01:00.0: GTT: 1024M 0x0000000008000000 - 0x0000000047FFFFFF
[ 210.157309] [drm] Detected VRAM RAM=128M, BAR=256M
[ 210.157310] [drm] RAM width 64bits DDR
[ 210.157378] [TTM] Zone kernel: Available graphics memory: 1019910 kiB
[ 210.157379] [TTM] Initializing pool allocator
[ 210.157385] [TTM] Initializing DMA pool allocator
[ 210.157412] [drm] radeon: 128M of VRAM memory ready
[ 210.157412] [drm] radeon: 1024M of GTT memory ready.
[ 210.157420] [drm] Loading RV710 Microcode
[ 210.183197] intel_powerclamp: No package C-state available
[ 210.344411] gpio_ich: GPIO from 462 to 511 on gpio_ich
[ 210.413339] rt61pci 0000:04:01.0 wlp4s1: renamed from wlan0
[ 210.553990] [drm] Internal thermal controller with fan control
[ 210.555519] [drm] radeon: dpm initialized
[ 210.582417] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 210.604556] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[ 210.604617] radeon 0000:01:00.0: WB enabled
[ 210.604620] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000008000c00 and cpu addr 0x00000000c2fec600
[ 210.604622] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000008000c0c and cpu addr 0x0000000092c54433
[ 210.605000] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0x00000000d6856c37
[ 210.605003] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 210.605004] [drm] Driver supports precise vblank timestamp query.
[ 210.605005] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 210.605065] radeon 0000:01:00.0: radeon: using MSI.
[ 210.605090] [drm] radeon: irq initialized.
[ 210.651188] [drm] ring test on 0 succeeded in 1 usecs
[ 210.651194] [drm] ring test on 3 succeeded in 2 usecs
[ 210.835771] [drm] ring test on 5 succeeded in 1 usecs
[ 210.835776] [drm] UVD initialized successfully.
[ 210.835901] [drm] ib test on ring 0 succeeded in 0 usecs
[ 210.835918] [drm] ib test on ring 3 succeeded in 0 usecs
[ 210.994782] [drm] ib test on ring 5 succeeded
[ 210.995432] [drm] Radeon Display Connectors
[ 210.995433] [drm] Connector 0:
[ 210.995433] [drm] VGA-1
[ 210.995435] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 210.995435] [drm] Encoders:
[ 210.995436] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 210.995436] [drm] Connector 1:
[ 210.995437] [drm] HDMI-A-1
[ 210.995437] [drm] HPD1
[ 210.995438] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 210.995439] [drm] Encoders:
[ 210.995439] [drm] DFP1: INTERNAL_UNIPHY
[ 210.995440] [drm] Connector 2:
[ 210.995440] [drm] DVI-I-1
[ 210.995441] [drm] HPD4
[ 210.995442] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[ 210.995443] [drm] Encoders:
[ 210.995443] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 210.995444] [drm] DFP2: INTERNAL_UNIPHY2
[ 211.053183] [drm] fb mappable at 0xD034D000
[ 211.053183] [drm] vram apper at 0xD0000000
[ 211.053184] [drm] size 8294400
[ 211.053185] [drm] fb depth is 24
[ 211.053185] [drm] pitch is 7680
[ 211.053273] fbcon: radeondrmfb (fb0) is primary device
[ 211.053429] Console: switching to colour frame buffer device 240x67
[ 211.053475] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 211.068204] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 219.709751] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 219.970596] r8169 0000:03:00.0 enp3s0: link down
[ 219.970688] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 220.120893] IPv6: ADDRCONF(NETDEV_UP): wlp4s1: link is not ready
[ 220.120960] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561.bin'
[ 220.202231] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8
[ 220.257558] IPv6: ADDRCONF(NETDEV_UP): wlp4s1: link is not ready
[ 220.544317] IPv6: ADDRCONF(NETDEV_UP): wlp4s1: link is not ready
[ 221.817349] wlp4s1: authenticate with 00:37:b7:07:39:5e
[ 221.833807] wlp4s1: send auth to 00:37:b7:07:39:5e (try 1/3)
[ 221.842691] wlp4s1: authenticated
[ 221.848088] wlp4s1: associate with 00:37:b7:07:39:5e (try 1/3)
[ 221.852883] wlp4s1: RX AssocResp from 00:37:b7:07:39:5e (capab=0x1411 status=0 aid=1)
[ 221.852939] wlp4s1: associated
[ 221.901611] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s1: link becomes ready
[ 222.245200] print_req_error: I/O error, dev fd0, sector 0
[ 222.245208] floppy: error 10 while reading block 0
[ 225.784618] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
[ 225.956986] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 21
[ 226.195087] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 1
[ 226.743830] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 13
[ 226.756927] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
[ 226.789499] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 4
[ 226.845735] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 2
[ 226.952914] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 8
[ 227.277496] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 19
[ 227.277502] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 21
[ 227.279119] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 23
[ 227.508491] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 16
[ 227.697494] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 27
[ 227.697502] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 29
[ 227.697507] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
[ 227.797502] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 28
[ 227.797509] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 30
[ 227.807748] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
[ 227.996511] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
[ 228.290825] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 19
[ 228.337150] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 12
[ 228.341590] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 14
[ 228.341596] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 16
[ 228.446136] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 9
[ 228.497503] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 9
[ 228.553443] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
[ 228.553447] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 1
[ 228.596528] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 0
[ 228.617437] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 23
[ 228.617442] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
[ 228.617917] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 27
[ 228.674237] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
[ 228.793261] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 0
[ 228.818034] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 17
[ 228.832309] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 19
[ 228.892053] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 18
[ 228.905495] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 2
[ 228.997498] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 0
[ 229.081865] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 16
[ 229.283253] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 13
[ 229.512794] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
[ 229.534036] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 16
[ 229.534044] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 18
[ 229.680889] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 2
[ 229.685867] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 4
[ 229.689197] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 6
[ 230.244786] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 16
[ 230.248052] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 18
[ 230.255281] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 22
[ 230.256499] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 29
[ 230.272520] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 1
[ 230.389761] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 27
[ 230.401767] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 30
[ 230.675817] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 14
[ 230.676529] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 18
[ 230.699782] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 27
[ 230.700887] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 0
[ 230.734062] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 26
[ 230.951837] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
[ 230.951863] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 1
[ 231.062983] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 29
[ 231.104921] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 18
[ 231.352594] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
[ 231.575745] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 28
[ 231.581366] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 30
[ 231.695267] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
[ 231.698111] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 7
[ 231.705451] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 14
[ 232.017157] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
[ 232.017166] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
[ 232.017173] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 7
[ 232.019886] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 9
[ 232.033386] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 14
[ 232.033392] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 16
[ 232.114029] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 14
[ 232.497994] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 6
[ 232.533724] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
[ 232.562085] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 24
[ 232.564651] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 26
[ 232.672423] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 26
[ 233.078104] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 8
[ 233.083115] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 10
[ 233.103806] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 30
[ 233.325926] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 27
[ 233.530195] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 16
[ 233.569139] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
[ 233.576268] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 9
[ 233.718215] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 6
[ 233.888306] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 10
[ 233.964305] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 28
[ 234.011939] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 30
[ 234.061463] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 23
[ 234.151693] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 12
[ 234.225590] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
[ 234.229358] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 27
[ 234.245450] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 11
[ 234.528952] print_req_error: I/O error, dev fd0, sector 0
[ 234.528961] floppy: error 10 while reading block 0
[ 246.800969] print_req_error: I/O error, dev fd0, sector 0
[ 246.800978] floppy: error 10 while reading block 0
[ 403.454478] kauditd_printk_skb: 22 callbacks suppressed
[ 403.454480] audit: type=1400 audit(1620900511.542:34): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/karim/.thumbnails/normal/b125736ea167a13a763ef173640f0f74.png" pid=2752 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 408.892527] audit: type=1400 audit(1620900516.977:35): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/karim/.thumbnails/normal/a9b4d527215e8471a78fd7475d0c7562.png" pid=2756 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 409.114514] audit: type=1400 audit(1620900517.201:36): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/karim/.thumbnails/normal/17c4121f4cf543fc8aa2dcba4aba734c.png" pid=2861 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 414.895716] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 23
[ 414.905280] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
[ 414.935756] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 15
[ 414.999425] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 7
[ 415.010376] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 13
[ 415.010382] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 15
[ 415.010604] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 17
[ 415.142193] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 4
[ 415.142200] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 6
[ 415.142206] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 8
[ 415.435952] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 6
[ 415.469800] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 26
[ 415.475039] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 29
[ 415.475544] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
[ 415.996942] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 15
[ 425.916555] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 4
[ 439.990058] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 29
[ 443.221408] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
[ 443.673133] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 16
[ 445.639358] perf: interrupt took too long (2516 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
[ 448.646604] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
[ 448.646610] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
[ 448.646681] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 7
[ 454.516166] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 15
[ 454.516172] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 17
[ 454.516215] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 19
[ 462.730047] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 23
[ 462.730145] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
[ 467.172977] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 20
[ 469.671442] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 29
[ 479.899791] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 29
[ 480.078332] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 12
[ 480.100967] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 30
[ 480.595559] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
[ 480.675200] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 9
[ 480.792495] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 19
[ 480.862409] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 13
[ 480.907268] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 1
[ 481.106840] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
[ 481.116464] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 29
[ 481.125677] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
[ 481.198302] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 7
[ 481.198442] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 9
[ 481.232998] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
[ 481.233004] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
[ 481.265499] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
[ 481.276558] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
[ 481.486581] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 20
[ 481.524696] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 12
[ 481.524702] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 14
[ 481.524707] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 16
[ 481.524950] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 18
[ 481.638957] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 10
[ 481.639698] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 14
[ 481.661981] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 29
[ 481.661987] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
[ 481.661992] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 1
[ 481.672275] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
[ 481.672286] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
[ 481.797302] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 19
[ 481.801518] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 21
[ 481.842207] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 17
[ 481.842395] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 19
[ 481.885106] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 10
[ 482.068501] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 12
[ 482.068507] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 14
[ 482.068512] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 16
[ 482.120511] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 15
[ 490.151866] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 26
[ 490.164168] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 30
[ 491.320034] perf: interrupt took too long (3155 > 3145), lowering kernel.perf_event_max_sample_rate to 63250
[ 493.517988] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 27
[ 493.523847] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 29
[ 493.602103] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 12
[ 493.633413] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
[ 493.633418] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 1
[ 494.113802] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 18
[ 494.113807] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 20
[ 494.113812] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 22
[ 494.316604] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
[ 494.729576] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 26
[ 497.074462] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 13
[ 500.906436] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 24
[ 500.994064] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 2
[ 500.994141] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 4
[ 501.005220] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 8
[ 501.005226] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 10
[ 501.005351] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 12
[ 501.162343] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 13
[ 501.173651] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 15
[ 501.230704] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
[ 501.327202] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 1
[ 501.448674] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
[ 501.468406] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 8
[ 501.488925] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 20
[ 504.182492] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 21
[ 504.333627] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 0
[ 504.343767] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
[ 512.249288] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 17
[ 514.078356] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 20
[ 523.575033] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 29
[ 536.751408] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
[ 544.239806] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 16
[ 545.264775] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 27
[ 555.504361] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 11
[ 557.858185] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.381 msecs
[ 557.858187] perf: interrupt took too long (14411 > 3943), lowering kernel.perf_event_max_sample_rate to 13750
[ 558.320888] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 4
[ 559.355244] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
[ 559.355250] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
[ 559.355291] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 7
[ 559.490268] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
[ 560.564543] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 10
[ 564.472753] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 15
[ 569.208873] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
[ 573.509355] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 28
[ 591.751180] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 22
[ 598.258543] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 12
[ 603.461271] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 24
[ 610.547455] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 22
[ 641.012031] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 0
[ 684.163061] perf: interrupt took too long (23502 > 18013), lowering kernel.perf_event_max_sample_rate to 8500
[ 776.053147] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 6
[ 776.293381] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
[ 776.508920] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 9
[ 776.554494] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 29
[ 776.554500] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
[ 776.573175] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 10
[ 776.589419] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
[ 776.589425] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 27
[ 776.608313] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
[ 776.671507] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 10
[ 776.699856] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 7
[ 776.760711] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 12
[ 776.804546] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 15
[ 776.804554] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 17
[ 776.818355] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 28
[ 776.842262] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 9
[ 777.007789] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 21
[ 777.053684] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 16
[ 777.090990] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 16
[ 777.326252] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 22
[ 777.383434] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 23
[ 777.383561] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
[ 777.394317] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
[ 777.394323] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 1
[ 777.398371] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
[ 777.508140] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
[ 777.620336] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 8
[ 777.687520] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 1
[ 777.752358] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 17
[ 777.759212] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 19
[ 800.332360] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 24
[ 800.628891] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 6
[ 872.983204] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 7.980 msecs
[ 872.983207] perf: interrupt took too long (66627 > 29377), lowering kernel.perf_event_max_sample_rate to 3000
[ 884.582676] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 9
[ 937.494504] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 9
[ 938.581322] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
[ 938.592829] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 10
[ 938.624690] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 16
[ 938.624713] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 18
[ 938.624722] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 20
[ 938.624731] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 22
[ 938.624737] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 23
[ 938.624744] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 24
[ 938.624750] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
[ 938.624756] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 26
[ 938.624763] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 27
[ 938.624769] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 28
[ 938.626065] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 1
[ 938.628345] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 7
[ 938.631081] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 9
[ 938.773011] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 23
[ 938.773016] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
[ 938.773090] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 27
[ 938.788902] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 4
[ 1007.297735] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 10
[ 1007.546909] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
[ 1007.587674] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 19
[ 1007.965072] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 29
[ 1007.977217] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 2
[ 1008.035896] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 10
[ 1008.050019] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 21
[ 1008.168106] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 23
[ 1008.207345] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 17
[ 1008.217731] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 22
[ 1008.254365] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 17
[ 1008.830152] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
[ 1008.830281] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 7
[ 1008.924485] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 2
[ 1008.928084] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 4
[ 1009.010762] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 28
[ 1009.021040] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 6
[ 1009.071839] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 9
[ 1009.075783] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 11
[ 1009.101570] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 29
[ 1009.178199] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 8
[ 1009.254933] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 22
karim@karim-G41MT-D3:~$
dpkg
karim@karim-G41MT-D3:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom Version Architecture Description
+++-===========================================================-===========================================================-============-===============================================================================
rc linux-image-4.15.0-111-generic 4.15.0-111.112 amd64 Signed kernel image generic
rc linux-image-4.15.0-112-generic 4.15.0-112.113 amd64 Signed kernel image generic
rc linux-image-4.15.0-115-generic 4.15.0-115.116 amd64 Signed kernel image generic
rc linux-image-4.15.0-117-generic 4.15.0-117.118 amd64 Signed kernel image generic
rc linux-image-4.15.0-118-generic 4.15.0-118.119 amd64 Signed kernel image generic
rc linux-image-4.15.0-121-generic 4.15.0-121.123 amd64 Signed kernel image generic
rc linux-image-4.15.0-122-generic 4.15.0-122.124 amd64 Signed kernel image generic
rc linux-image-4.15.0-123-generic 4.15.0-123.126 amd64 Signed kernel image generic
rc linux-image-4.15.0-124-generic 4.15.0-124.127 amd64 Signed kernel image generic
rc linux-image-4.15.0-126-generic 4.15.0-126.129 amd64 Signed kernel image generic
rc linux-image-4.15.0-128-generic 4.15.0-128.131 amd64 Signed kernel image generic
rc linux-image-4.15.0-130-generic 4.15.0-130.134 amd64 Signed kernel image generic
rc linux-image-4.15.0-132-generic 4.15.0-132.136 amd64 Signed kernel image generic
rc linux-image-4.15.0-134-generic 4.15.0-134.138 amd64 Signed kernel image generic
rc linux-image-4.15.0-135-generic 4.15.0-135.139 amd64 Signed kernel image generic
rc linux-image-4.15.0-136-generic 4.15.0-136.140 amd64 Signed kernel image generic
rc linux-image-4.15.0-137-generic 4.15.0-137.141 amd64 Signed kernel image generic
rc linux-image-4.15.0-139-generic 4.15.0-139.143 amd64 Signed kernel image generic
rc linux-modules-4.15.0-111-generic 4.15.0-111.112 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-112-generic 4.15.0-112.113 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-115-generic 4.15.0-115.116 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-117-generic 4.15.0-117.118 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-118-generic 4.15.0-118.119 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-121-generic 4.15.0-121.123 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-122-generic 4.15.0-122.124 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-123-generic 4.15.0-123.126 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-124-generic 4.15.0-124.127 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-126-generic 4.15.0-126.129 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-128-generic 4.15.0-128.131 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-130-generic 4.15.0-130.134 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-132-generic 4.15.0-132.136 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-134-generic 4.15.0-134.138 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-135-generic 4.15.0-135.139 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-136-generic 4.15.0-136.140 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-137-generic 4.15.0-137.141 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-4.15.0-139-generic 4.15.0-139.143 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-111-generic 4.15.0-111.112 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-112-generic 4.15.0-112.113 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-115-generic 4.15.0-115.116 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-117-generic 4.15.0-117.118 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-118-generic 4.15.0-118.119 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-121-generic 4.15.0-121.123 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-122-generic 4.15.0-122.124 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-123-generic 4.15.0-123.126 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-124-generic 4.15.0-124.127 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-126-generic 4.15.0-126.129 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-128-generic 4.15.0-128.131 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-130-generic 4.15.0-130.134 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-132-generic 4.15.0-132.136 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-134-generic 4.15.0-134.138 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-135-generic 4.15.0-135.139 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-136-generic 4.15.0-136.140 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-137-generic 4.15.0-137.141 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
rc linux-modules-extra-4.15.0-139-generic 4.15.0-139.143 amd64 Linux kernel extra modules for version 4.15.0 on 64 bit x86 SMP
karim@karim-G41MT-D3:~$
Dernière modification par Kaaria (Le 13/05/2021, à 11:26)
Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio
Hors ligne
#16 Le 13/05/2021, à 11:27
- xubu1957
Re : Démarrage PC très lent [Résolu]
Pour nettoyer :
Pour supprimer tous ces fichiers de configuration devenus sans objets et marqués "rc", et uniquement ces fichiers, exécute :
dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P
_ _ _
Tente cette commande, pour les permissions :
Merci de montrer :
echo -e "\n\tNombre d'éléments de /home/moi ne m'appartenant pas :"; find ~ \( ! -user $USER -o ! -group $USER \) | wc -l
Dernière modification par xubu1957 (Le 13/05/2021, à 11:28)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#17 Le 13/05/2021, à 11:31
- Kaaria
Re : Démarrage PC très lent [Résolu]
Pour nettoyer :
Le 11/02/2017, moko138 a écrit :Pour supprimer tous ces fichiers de configuration devenus sans objets et marqués "rc", et uniquement ces fichiers, exécute :
dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P
_ _ _
Tente cette commande, pour les permissions :
moko138 a écrit :Merci de montrer :
echo -e "\n\tNombre d'éléments de /home/moi ne m'appartenant pas :"; find ~ \( ! -user $USER -o ! -group $USER \) | wc -l
karim@karim-G41MT-D3:~$ dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P
(Lecture de la base de données... 269625 fichiers et répertoires déjà installés.)
Purge des fichiers de configuration de linux-image-4.15.0-111-generic (4.15.0-111.112) ...
Purge des fichiers de configuration de linux-image-4.15.0-112-generic (4.15.0-112.113) ...
Purge des fichiers de configuration de linux-image-4.15.0-115-generic (4.15.0-115.116) ...
Purge des fichiers de configuration de linux-image-4.15.0-117-generic (4.15.0-117.118) ...
Purge des fichiers de configuration de linux-image-4.15.0-118-generic (4.15.0-118.119) ...
Purge des fichiers de configuration de linux-image-4.15.0-121-generic (4.15.0-121.123) ...
Purge des fichiers de configuration de linux-image-4.15.0-122-generic (4.15.0-122.124) ...
Purge des fichiers de configuration de linux-image-4.15.0-123-generic (4.15.0-123.126) ...
Purge des fichiers de configuration de linux-image-4.15.0-124-generic (4.15.0-124.127) ...
Purge des fichiers de configuration de linux-image-4.15.0-126-generic (4.15.0-126.129) ...
Purge des fichiers de configuration de linux-image-4.15.0-128-generic (4.15.0-128.131) ...
Purge des fichiers de configuration de linux-image-4.15.0-130-generic (4.15.0-130.134) ...
Purge des fichiers de configuration de linux-image-4.15.0-132-generic (4.15.0-132.136) ...
Purge des fichiers de configuration de linux-image-4.15.0-134-generic (4.15.0-134.138) ...
Purge des fichiers de configuration de linux-image-4.15.0-135-generic (4.15.0-135.139) ...
Purge des fichiers de configuration de linux-image-4.15.0-136-generic (4.15.0-136.140) ...
Purge des fichiers de configuration de linux-image-4.15.0-137-generic (4.15.0-137.141) ...
Purge des fichiers de configuration de linux-image-4.15.0-139-generic (4.15.0-139.143) ...
Purge des fichiers de configuration de linux-modules-4.15.0-111-generic (4.15.0-111.112) ...
Purge des fichiers de configuration de linux-modules-4.15.0-112-generic (4.15.0-112.113) ...
Purge des fichiers de configuration de linux-modules-4.15.0-115-generic (4.15.0-115.116) ...
Purge des fichiers de configuration de linux-modules-4.15.0-117-generic (4.15.0-117.118) ...
Purge des fichiers de configuration de linux-modules-4.15.0-118-generic (4.15.0-118.119) ...
Purge des fichiers de configuration de linux-modules-4.15.0-121-generic (4.15.0-121.123) ...
Purge des fichiers de configuration de linux-modules-4.15.0-122-generic (4.15.0-122.124) ...
Purge des fichiers de configuration de linux-modules-4.15.0-123-generic (4.15.0-123.126) ...
Purge des fichiers de configuration de linux-modules-4.15.0-124-generic (4.15.0-124.127) ...
Purge des fichiers de configuration de linux-modules-4.15.0-126-generic (4.15.0-126.129) ...
Purge des fichiers de configuration de linux-modules-4.15.0-128-generic (4.15.0-128.131) ...
Purge des fichiers de configuration de linux-modules-4.15.0-130-generic (4.15.0-130.134) ...
Purge des fichiers de configuration de linux-modules-4.15.0-132-generic (4.15.0-132.136) ...
Purge des fichiers de configuration de linux-modules-4.15.0-134-generic (4.15.0-134.138) ...
Purge des fichiers de configuration de linux-modules-4.15.0-135-generic (4.15.0-135.139) ...
Purge des fichiers de configuration de linux-modules-4.15.0-136-generic (4.15.0-136.140) ...
Purge des fichiers de configuration de linux-modules-4.15.0-137-generic (4.15.0-137.141) ...
Purge des fichiers de configuration de linux-modules-4.15.0-139-generic (4.15.0-139.143) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-111-generic (4.15.0-111.112) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-112-generic (4.15.0-112.113) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-115-generic (4.15.0-115.116) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-117-generic (4.15.0-117.118) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-118-generic (4.15.0-118.119) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-121-generic (4.15.0-121.123) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-122-generic (4.15.0-122.124) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-123-generic (4.15.0-123.126) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-124-generic (4.15.0-124.127) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-126-generic (4.15.0-126.129) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-128-generic (4.15.0-128.131) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-130-generic (4.15.0-130.134) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-132-generic (4.15.0-132.136) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-134-generic (4.15.0-134.138) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-135-generic (4.15.0-135.139) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-136-generic (4.15.0-136.140) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-137-generic (4.15.0-137.141) ...
Purge des fichiers de configuration de linux-modules-extra-4.15.0-139-generic (4.15.0-139.143) ...
karim@karim-G41MT-D3:~$
karim@karim-G41MT-D3:~$ echo -e "\n\tNombre d'éléments de /home/moi ne m'appartenant pas :"; find ~ \( ! -user $USER -o ! -group $USER \) | wc -l
Nombre d'éléments de /home/moi ne m'appartenant pas :
find: ‘/home/karim/.cache/dconf’: Permission non accordée
3
karim@karim-G41MT-D3:~$
Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio
Hors ligne
#18 Le 13/05/2021, à 11:32
- xubu1957
Re : Démarrage PC très lent [Résolu]
Pour les permissions, tu as dans ce message > les explications de moko138
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#19 Le 13/05/2021, à 11:46
- Kaaria
Re : Démarrage PC très lent [Résolu]
Pour les permissions, tu as dans ce message > les explications de moko138
Je crois que j'ai fait une erreur avec la commande pour les permissions. Je l'ai exécuté sans savoir si j'étais en session root ou normale... Mais je n'ai pas redémarré dans le doute.
karim@karim-G41MT-D3:~$ sudo chown -Rc $USER:$USER /home/$USER
appartenance de '/home/karim/Ebook-Viewer/easy-ebook-viewer' modifiée de root:root en karim:karim
appartenance de '/home/karim/.wget-hsts' modifiée de root:root en karim:karim
appartenance de '/home/karim/.cache/dconf/user' modifiée de root:root en karim:karim
appartenance de '/home/karim/.cache/dconf' modifiée de root:root en karim:karim
karim@karim-G41MT-D3:~$
Dernière modification par Kaaria (Le 13/05/2021, à 11:46)
Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio
Hors ligne
#20 Le 13/05/2021, à 11:53
- xubu1957
Re : Démarrage PC très lent [Résolu]
Je donne les informations de moko138, mais pour le reste, je suis un peu dépassé.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#21 Le 13/05/2021, à 11:56
- Kaaria
Re : Démarrage PC très lent [Résolu]
Je donne les informations de moko138, mais pour le reste, je suis un peu dépassé.
De toute façon la session root n'est pas activée par défaut si j'ai bien compris, on l'active avec sudo -i : https://doc.ubuntu-fr.org/root.
Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio
Hors ligne
#22 Le 14/05/2021, à 14:34
- Kaaria
Re : Démarrage PC très lent [Résolu]
Bonjour,
Le temps de démarrage s'est encore allongé.
karim@karim-G41MT-D3:~$ sudo systemd-analyze time
Startup finished in 3min 14.392s (kernel) + 1min 5.764s (userspace) = 4min 20.157s
graphical.target reached after 29.382s in userspace
karim@karim-G41MT-D3:~$
Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio
Hors ligne
#23 Le 14/05/2021, à 15:14
- ylag
Re : Démarrage PC très lent [Résolu]
Bonjour,
[ 56.416396] print_req_error: I/O error, dev fd0, sector 0
[ 56.416403] floppy: error 10 while reading block 0
[ 68.764434] print_req_error: I/O error, dev fd0, sector 0
[ 68.764440] floppy: error 10 while reading block 0
[ 81.116381] print_req_error: I/O error, dev fd0, sector 0
[ 81.116388] floppy: error 10 while reading block 0
[ 93.464388] print_req_error: I/O error, dev fd0, sector 0
[ 93.464396] floppy: error 10 while reading block 0
[ 106.812439] print_req_error: I/O error, dev fd0, sector 0
On dirait que le système recherche un lecteur de disquettes (floppy).
Peut-être explorer le bios pour voir s'il n'y aurait pas une configuration à désactiver concernant ce genre de lecteur ?
A+
Hors ligne
#24 Le 14/05/2021, à 18:19
- Kaaria
Re : Démarrage PC très lent [Résolu]
Bonjour,
dmesg au #15 a écrit :[ 56.416396] print_req_error: I/O error, dev fd0, sector 0
[ 56.416403] floppy: error 10 while reading block 0
[ 68.764434] print_req_error: I/O error, dev fd0, sector 0
[ 68.764440] floppy: error 10 while reading block 0
[ 81.116381] print_req_error: I/O error, dev fd0, sector 0
[ 81.116388] floppy: error 10 while reading block 0
[ 93.464388] print_req_error: I/O error, dev fd0, sector 0
[ 93.464396] floppy: error 10 while reading block 0
[ 106.812439] print_req_error: I/O error, dev fd0, sector 0On dirait que le système recherche un lecteur de disquettes (floppy).
Peut-être explorer le bios pour voir s'il n'y aurait pas une configuration à désactiver concernant ce genre de lecteur ?A+
Bonjour,
Bien vu et merci !
Effectivement, depuis le changement de la pile j'avais une ligne "Floppy disque" qui apparaissait dans l'arborescence mais je n'avais pas fait le rapprochement avec le temps de démarrage.
Pour ceux qui ont une carte mère Gigabyte (G41MT-D3) et pas de lecteur de disquettes, les réglages du BIOS sont les suivants:
Standard CMOS Features > Drive A : NONE > Floppy 3 Mode Support : Disabled > F10 (Save)
Après reboot, les retours systemd :
karim@karim-G41MT-D3:~$ sudo systemd-analyze time
[sudo] Mot de passe de karim :
Startup finished in 36.335s (kernel) + 24.835s (userspace) = 1min 1.171s
graphical.target reached after 24.824s in userspace
karim@karim-G41MT-D3:~$ sudo systemd-analyze blame
15.161s dev-sda1.device
14.123s systemd-journal-flush.service
10.897s keyboard-setup.service
10.681s systemd-tmpfiles-setup-dev.service
9.771s systemd-sysctl.service
6.500s snapd.service
5.251s grub-common.service
4.738s gpu-manager.service
4.579s NetworkManager.service
4.413s udisks2.service
4.332s networkd-dispatcher.service
3.035s accounts-daemon.service
2.009s ModemManager.service
1.303s lightdm.service
1.302s plymouth-quit-wait.service
1.291s hddtemp.service
1.027s systemd-modules-load.service
783ms wpa_supplicant.service
751ms apport.service
742ms lm-sensors.service
657ms dev-loop1.device
651ms dev-loop3.device
648ms dev-loop2.device
644ms dev-loop0.device
lines 1-24
Le problème de départ est donc réglé. Mais tant qu'on y est, est-ce que quelqu'un aurait une idée pour optimiser encore et s'approcher des 30s ?
Dernière modification par Kaaria (Le 14/05/2021, à 18:22)
Lubuntu 20.04 LTS/ Pentium Dual-Core 5700 3.00GHz/ RAM 2Gio
Hors ligne
#25 Le 14/05/2021, à 18:24
- ylag
Re : Démarrage PC très lent [Résolu]
Bonsoir,
Il y a plusieurs lignes de ce type dans le dmesg au #15 :
[ 225.784618] ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
...ça semble indiquer un souci avec le pilote de la carte WiFi ?
A+
Hors ligne