Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 10/01/2020, à 10:05

pierrequiroule

[RÉSOLU] imprimante scanner Brother DCP-L2530DW

Bonjour smile

Je tente d'installer cette imprimante Brother DCP-L2530DW.
J'ai d'abord tenté via le script de demonipuch. Et l'impression ne se lance pas. J'en ai parlé ici (#2650).

Du coup j'ai supprimé les deux dcp-l2530dw que le script m'avait fait apparaître, puis je me suis lancé dans l'installation des pilotes fournis par brother et la procédure indiquée ici (driver install tool).
La procédure semble s'être déroulée normalement.
Cette fois-ci, une seule imprimante apparaît : DCPL2530DW ; brother DCPL2530DW for CUPS.
Le résultat est identique : le scan fonctionne avec xsane, mais l'impression reste impossible. Mon fichier à imprimer reste dans la file d'attente de l'imprimante et rien ne se passe du côté de l'imprimante. J'ai tenté d'imprimer la page de test sans plus de succès.

Voici le déroulement de l'installation via Terminal :

pierre@pierre:~$ cd Téléchargements
pierre@pierre:~/Téléchargements$ sudo bash linux-brprinter-installer-2.2.1-1
[sudo] Mot de passe de pierre : 
Input model name ->dcp-l2530dw

You are going to install following packages.
   dcpl2530dwpdrv-4.0.0-1.i386.deb
   brscan4-0.4.8-1.amd64.deb
   brscan-skey-0.2.4-1.amd64.deb
OK? [y/N] ->y


License Agreement

This Agreement provides terms and conditions for license grant from Brother Industries, Ltd ("Brother"). Brother, who owns all copyrights to the software that is distributed with this Agreement ("Software") to recipients thereof ("User"), for use of the Software. User shall have the right to use the Software only in accordance with the terms and conditions of this Agreement. Any use by User of the Software shall be deemed as its agreement hereto.
Note:
Please click on "I Accept" while holding down "Shift" or right click on "I Accept" and select "Save Target As,,," from the menu.


Brother retains any and all copyrights to the Software. In no case this Agreement shall be construed to assign or otherwise transfer from Brother to User any copyrights or other intellectual property rights to whole or any part of the Software.
Brother grants User a non-exclusive license: to reproduce and/or distribute (via Internet or in any other manner) the Software. Further, Brother grants User a non-exclusive license to modify, alter, translate or otherwise prepare derivative works of the Software and to reproduce and distribute (via Internet or in any other manner) such modification, alteration, translation or other derivative works for any purpose.
The license of the Software from Brother hereunder is granted "AS IS." BROTHER HEREBY DISCLAIMS ANY WARRANTIES WITH RESPECT TO THE SOFTWARE, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY FOR THE QUALITY, MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR NON-INFRINGEMENT. Brother shall have no liability in contract, tort (including negligence or breach of statutory duty) or otherwise for any interruption of use, loss of data, or for any indirect, incidental, punitive or consequential loss or damage, or for any loss of profit, revenue, data, goodwill or anticipated savings that arises under, out of, or in contemplation of this Agreement or otherwise arises due to any error, inaccuracy or defect in the Software even if Brother has been advised of the possibility of such loss or damage. Further, Brother shall have no liability to disclose and/or distribute the source code of the Software to User under any circumstances. In no case shall the above license by Brother to modify, alter, translate or otherwise prepare derivative works of the Software be construed as Brother's implied agreement or undertakings to disclose and/or distribute the source code of the Software.
The Software contains the programs licensed under the terms and conditions of GNU GENERAL PUBLIC LICENSE Version 2. Notwithstanding the foregoing, the terms and conditions of GNU GENERAL PUBLIC LICENSE Version 2 is applied to such programs. Such programs are stored on the following directory and its sub-directories.
<cupswrapper>
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA

Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.

c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:

a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.
one line to give the program's name and an idea of what it does.
Copyright (C) yyyy  name of author

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
type `show w'.  This is free software, and you are welcome
to redistribute it under certain conditions; type `show c' 
for details.
The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker.

signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License.


Do you agree? [Y/n] ->y

wget -T 10 -nd --no-cache http://www.brother.com/pub/bsc/linux/packages/dcpl2530dwpdrv-4.0.0-1.i386.deb
--2020-01-10 09:22:22--  http://www.brother.com/pub/bsc/linux/packages/dcpl2530dwpdrv-4.0.0-1.i386.deb
Résolution de www.brother.com (www.brother.com)… 104.69.109.202
Connexion à www.brother.com (www.brother.com)|104.69.109.202|:80… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 122986 (120K)
Enregistre : «dcpl2530dwpdrv-4.0.0-1.i386.deb»

dcpl2530dwpdrv-4.0. 100%[===================>] 120,10K  --.-KB/s    ds 0,05s   

2020-01-10 09:22:22 (2,23 MB/s) - «dcpl2530dwpdrv-4.0.0-1.i386.deb» enregistré [122986/122986]

dpkg -x dcpl2530dwpdrv-4.0.0-1.i386.deb /
dpkg-deb: building package 'dcpl2530dwpdrv' in 'dcpl2530dwpdrv-4.0.0-1a.i386.deb'.
dpkg -b ./brother_driver_packdir dcpl2530dwpdrv-4.0.0-1a.i386.deb
dpkg -i --force-all dcpl2530dwpdrv-4.0.0-1a.i386.deb
(Lecture de la base de données... 326877 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de dcpl2530dwpdrv-4.0.0-1a.i386.deb ...
lpadmin : The printer or class does not exist.
Dépaquetage de dcpl2530dwpdrv:i386 (4.0.0-1) sur (4.0.0-1) ...
Paramétrage de dcpl2530dwpdrv:i386 (4.0.0-1) ...
lpadmin -p DCPL2530DW -E -v usb://dev/usb/lp0 -P /usr/share/ppd/brother/brother-DCPL2530DW-cups-en.ppd
#
Will you specify the Device URI? [Y/n] ->n

Test Print? [y/N] ->y

wait 5s.
lpr -P DCPL2530DW /usr/share/cups/data/testprint
You are going to install following packages.
   brscan4-0.4.8-1.amd64.deb

=========================================
Brother License Agreement

Brother retains any and all copyrights to the Software. In no case this Agreement shall be construed to assign or otherwise transfer from Brother to User any copyrights or other intellectual property rights to whole or any part of the Software.

Brother grants User a non-exclusive license: to reproduce and/or distribute (via Internet or in any other manner) the Software. Further, Brother grants User a non-exclusive license to modify, alter, translate or otherwise prepare derivative works of the Software and to reproduce and distribute (via Internet or in any other manner) such modification, alteration, translation or other derivative works for any purpose.

The license of the Software from Brother hereunder is granted "AS IS." BROTHER HEREBY DISCLAIMS ANY WARRANTIES WITH RESPECT TO THE SOFTWARE, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY FOR THE QUALITY, MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR NON-INFRINGEMENT.
Brother shall have no liability in contract, tort (including negligence or breach of statutory duty) or otherwise for any interruption of use, loss of data, or for any indirect, incidental, punitive or consequential loss or damage, or for any loss of profit, revenue, data, goodwill or anticipated savings that arises under, out of, or in contemplation of this Agreement or otherwise arises due to any error, inaccuracy or defect in the Software even if Brother has been advised of the possibility of such loss or damage.
Further, Brother shall have no liability to disclose and/or distribute the source cord of the Software to User under any circumstances. In no case shall the above license by Brother to modify, alter, translate or otherwise prepare derivative works of the Software be construed as Brother's implied agreement or undertakings to disclose and/or distribute the source cord of the Software.
=========================================
Do you agree? [Y/n] ->y

wget -T 10 -nd --no-cache http://www.brother.com/pub/bsc/linux/packages/brscan4-0.4.8-1.amd64.deb
--2020-01-10 09:23:38--  http://www.brother.com/pub/bsc/linux/packages/brscan4-0.4.8-1.amd64.deb
Résolution de www.brother.com (www.brother.com)… 104.69.109.202
Connexion à www.brother.com (www.brother.com)|104.69.109.202|:80… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 114244 (112K) [application/x-troff-man]
Enregistre : «brscan4-0.4.8-1.amd64.deb»

brscan4-0.4.8-1.amd 100%[===================>] 111,57K  --.-KB/s    ds 0,05s   

2020-01-10 09:23:38 (2,11 MB/s) - «brscan4-0.4.8-1.amd64.deb» enregistré [114244/114244]

dpkg -i --force-all brscan4-0.4.8-1.amd64.deb
(Lecture de la base de données... 326877 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de brscan4-0.4.8-1.amd64.deb ...
Dépaquetage de brscan4 (0.4.8-1) sur (0.4.8-1) ...
Paramétrage de brscan4 (0.4.8-1) ...
This software is based in part on the work of the Independent JPEG Group.
You are going to install following packages.
   brscan-skey-0.2.4-1.amd64.deb

=========================================
Brother License Agreement

Brother retains any and all copyrights to the Software. In no case this Agreement shall be construed to assign or otherwise transfer from Brother to User any copyrights or other intellectual property rights to whole or any part of the Software.

Brother grants User a non-exclusive license: to reproduce and/or distribute (via Internet or in any other manner) the Software. Further, Brother grants User a non-exclusive license to modify, alter, translate or otherwise prepare derivative works of the Software and to reproduce and distribute (via Internet or in any other manner) such modification, alteration, translation or other derivative works for any purpose.

The license of the Software from Brother hereunder is granted "AS IS." BROTHER HEREBY DISCLAIMS ANY WARRANTIES WITH RESPECT TO THE SOFTWARE, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY FOR THE QUALITY, MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR NON-INFRINGEMENT.
Brother shall have no liability in contract, tort (including negligence or breach of statutory duty) or otherwise for any interruption of use, loss of data, or for any indirect, incidental, punitive or consequential loss or damage, or for any loss of profit, revenue, data, goodwill or anticipated savings that arises under, out of, or in contemplation of this Agreement or otherwise arises due to any error, inaccuracy or defect in the Software even if Brother has been advised of the possibility of such loss or damage.
Further, Brother shall have no liability to disclose and/or distribute the source cord of the Software to User under any circumstances. In no case shall the above license by Brother to modify, alter, translate or otherwise prepare derivative works of the Software be construed as Brother's implied agreement or undertakings to disclose and/or distribute the source cord of the Software.
=========================================
Do you agree? [Y/n] ->y

wget -T 10 -nd --no-cache http://www.brother.com/pub/bsc/linux/packages/brscan-skey-0.2.4-1.amd64.deb
--2020-01-10 09:23:43--  http://www.brother.com/pub/bsc/linux/packages/brscan-skey-0.2.4-1.amd64.deb
Résolution de www.brother.com (www.brother.com)… 104.69.109.202
Connexion à www.brother.com (www.brother.com)|104.69.109.202|:80… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 50852 (50K) [application/x-troff-man]
Enregistre : «brscan-skey-0.2.4-1.amd64.deb»

brscan-skey-0.2.4-1 100%[===================>]  49,66K  --.-KB/s    ds 0,03s   

2020-01-10 09:23:43 (1,85 MB/s) - «brscan-skey-0.2.4-1.amd64.deb» enregistré [50852/50852]

dpkg -i --force-all brscan-skey-0.2.4-1.amd64.deb
(Lecture de la base de données... 326877 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de brscan-skey-0.2.4-1.amd64.deb ...
Dépaquetage de brscan-skey (0.2.4-1) sur (0.2.4-1) ...
Paramétrage de brscan-skey (0.2.4-1) ...
Hit Enter/Return key.
pierre@pierre:~/Téléchargements$ cd
pierre@pierre:~$ sudo apt install cups
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
cups est déjà la version la plus récente (2.2.7-1ubuntu2.7).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
pierre@pierre:~$ 

À ce stade je ne sais pas quoi faire, merci de vos suggestions.
smile

Dernière modification par pierrequiroule (Le 10/01/2020, à 18:33)

Hors ligne

#2 Le 10/01/2020, à 10:20

xubu1957

Re : [RÉSOLU] imprimante scanner Brother DCP-L2530DW

Bonjour,

Montre :

dpkg -l | grep -i brother

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#3 Le 10/01/2020, à 11:46

pierrequiroule

Re : [RÉSOLU] imprimante scanner Brother DCP-L2530DW

Salut et merci de ton aide.
Voici :

pierre@pierre:~$ dpkg -l | grep -i brother
ii  brother-udev-rule-type1                              1.0.0-1                                         all          Brother udev rule type 1
ii  brscan-skey                                          0.2.4-1                                         amd64        Brother Linux scanner S-KEY tool
ii  brscan3                                              0.2.11-5                                        amd64        Brother Scanner Driver
ii  brscan4                                              0.4.8-1                                         amd64        Brother Scanner Driver
ii  dcpj315wcupswrapper:i386                             1.1.3-1                                         i386         Brother CUPS Inkjet Printer Definitions
ii  dcpj315wlpr:i386                                     1.1.3-1                                         i386         Brother lpr Inkjet Printer Definitions
ii  dcpl2530dwpdrv:i386                                  4.0.0-1                                         i386         Brother DCP-L2530DW printer driver (lpd/cups)
ii  printer-driver-brlaser                               4-1                                             amd64        printer driver for (some) Brother laser printers
ii  printer-driver-ptouch                                1.4.2-3                                         amd64        printer driver Brother P-touch label printers

Hors ligne

#4 Le 10/01/2020, à 12:11

xubu1957

Re : [RÉSOLU] imprimante scanner Brother DCP-L2530DW

Je laisse la main aux aidants spécialistes en imprimantes.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#5 Le 10/01/2020, à 12:21

pierrequiroule

Re : [RÉSOLU] imprimante scanner Brother DCP-L2530DW

Ok, merci de ta tentative.
Là je ne sais pas quoi faire...

Hors ligne

#6 Le 10/01/2020, à 12:31

sylvain3800

Re : [RÉSOLU] imprimante scanner Brother DCP-L2530DW

salut ,
Visiblement les pilotes sont installés donc le problème se situe ailleurs.
Il va falloir chercher oú cela déconne
Donne nous  le retour de ces commandes que tu aura passé dans un terminal :

groups
dpkg -l | grep cups
lsusb
lpstat -t
/usr/sbin/lpinfo -v

(durera 1 minute, attends d'avoir la main de nouveau)

cat /var/log/cups/error_log
sudo cat /etc/cups/printers.conf
sudo cat /etc/cups/cupsd.conf

J'espére que je trouverais quelque chose .
@++

Dernière modification par sylvain3800 (Le 10/01/2020, à 12:47)


Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#7 Le 10/01/2020, à 12:57

pierrequiroule

Re : [RÉSOLU] imprimante scanner Brother DCP-L2530DW

Salut et merci de ton support,
Voici :

pierre@pierre:~$ groups
pierre sys adm dialout cdrom sudo dip plugdev lpadmin sambashare
pierre@pierre:~$ dpkg -l | grep cups
ii  bluez-cups                                           5.48-0ubuntu3.2                                 amd64        Bluetooth printer driver for CUPS
ii  cups                                                 2.2.7-1ubuntu2.7                                amd64        Common UNIX Printing System(tm) - PPD/driver support, web interface
ii  cups-browsed                                         1.20.2-0ubuntu3.1                               amd64        OpenPrinting CUPS Filters - cups-browsed
ii  cups-bsd                                             2.2.7-1ubuntu2.7                                amd64        Common UNIX Printing System(tm) - BSD commands
ii  cups-client                                          2.2.7-1ubuntu2.7                                amd64        Common UNIX Printing System(tm) - client programs (SysV)
ii  cups-common                                          2.2.7-1ubuntu2.7                                all          Common UNIX Printing System(tm) - common files
ii  cups-core-drivers                                    2.2.7-1ubuntu2.7                                amd64        Common UNIX Printing System(tm) - driverless printing
ii  cups-daemon                                          2.2.7-1ubuntu2.7                                amd64        Common UNIX Printing System(tm) - daemon
ii  cups-filters                                         1.20.2-0ubuntu3.1                               amd64        OpenPrinting CUPS Filters - Main Package
ii  cups-filters-core-drivers                            1.20.2-0ubuntu3.1                               amd64        OpenPrinting CUPS Filters - Driverless printing
ii  cups-ipp-utils                                       2.2.7-1ubuntu2.7                                amd64        Common UNIX Printing System(tm) - IPP developer/admin utilities
ii  cups-pk-helper                                       0.2.6-1ubuntu1.2                                amd64        PolicyKit helper to configure cups with fine-grained privileges
ii  cups-ppdc                                            2.2.7-1ubuntu2.7                                amd64        Common UNIX Printing System(tm) - PPD manipulation utilities
ii  cups-server-common                                   2.2.7-1ubuntu2.7                                all          Common UNIX Printing System(tm) - server common files
ii  dcpj315wcupswrapper:i386                             1.1.3-1                                         i386         Brother CUPS Inkjet Printer Definitions
ii  dcpl2530dwpdrv:i386                                  4.0.0-1                                         i386         Brother DCP-L2530DW printer driver (lpd/cups)
ii  libcups2:amd64                                       2.2.7-1ubuntu2.7                                amd64        Common UNIX Printing System(tm) - Core library
ii  libcups2:i386                                        2.2.7-1ubuntu2.7                                i386         Common UNIX Printing System(tm) - Core library
ii  libcupscgi1:amd64                                    2.2.7-1ubuntu2.7                                amd64        Common UNIX Printing System(tm) - CGI library
ii  libcupsfilters1:amd64                                1.20.2-0ubuntu3.1                               amd64        OpenPrinting CUPS Filters - Shared library
rc  libcupsfilters1:i386                                 1.0.52-0ubuntu1                                 i386         OpenPrinting CUPS Filters - Shared library
ii  libcupsimage2:amd64                                  2.2.7-1ubuntu2.7                                amd64        Common UNIX Printing System(tm) - Raster image library
rc  libcupsimage2:i386                                   1.7.2-0ubuntu1                                  i386         Common UNIX Printing System(tm) - Raster image library
ii  libcupsmime1:amd64                                   2.2.7-1ubuntu2.7                                amd64        Common UNIX Printing System(tm) - MIME library
ii  libcupsppdc1:amd64                                   2.2.7-1ubuntu2.7                                amd64        Common UNIX Printing System(tm) - PPD manipulation library
ii  printer-driver-hpcups                                3.17.10+repack0-5                               amd64        HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii  python-cups                                          1.9.73-2                                        amd64        Python bindings for CUPS
rc  python-cupshelpers                                   1.4.3+20140219-0ubuntu2.6                       all          Python modules for printer configuration with CUPS
ii  python3-cups                                         1.9.73-2                                        amd64        Python3 bindings for CUPS
ii  python3-cupshelpers                                  1.5.11-1ubuntu2                                 all          Python utility modules around the CUPS printing system
pierre@pierre:~$ 
pierre@pierre:~$ lsusb
Bus 002 Device 004: ID 046d:0802 Logitech, Inc. Webcam C200
Bus 002 Device 006: ID 04f9:0420 Brother Industries, Ltd 
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 046d:c52e Logitech, Inc. MK260 Wireless Combo Receiver
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pierre@pierre:~$ 
pierre@pierre:~$ lpstat -t
scheduler is running
system default destination: DCPL2530DW
matériel pour DCPJ315W : usb://Brother/DCP-J315W
matériel pour DCPL2530DW : usb://dev/usb/lp0
DCPJ315W accepte des requêtes depuis jeu. 09 janv. 2020 20:09:31 CET
DCPL2530DW accepte des requêtes depuis ven. 10 janv. 2020 09:23:16 CET
printer DCPJ315W is idle.  enabled since jeu. 09 janv. 2020 20:09:31 CET
printer DCPL2530DW now printing DCPL2530DW-1555.  enabled since ven. 10 janv. 2020 09:23:16 CET
	Waiting for printer to become available.
DCPJ315W-1475           anonymous         1024   dim. 15 sept. 2019 17:01:14 CEST
DCPJ315W-1476           anonymous         1024   dim. 15 sept. 2019 17:01:30 CEST
DCPJ315W-1477           anonymous         1024   dim. 15 sept. 2019 17:02:14 CEST
DCPJ315W-1478           anonymous         1024   dim. 15 sept. 2019 17:04:14 CEST
DCPJ315W-1479           anonymous         1024   dim. 15 sept. 2019 17:04:18 CEST
DCPL2530DW-1555         root              1024   ven. 10 janv. 2020 09:23:16 CET
DCPL2530DW-1557         pierre            1024   ven. 10 janv. 2020 09:35:57 CET
pierre@pierre:~$ 

ça veut dire quoi idle ?

pierre@pierre:~$ /usr/sbin/lpinfo -v
network beh
direct parallel:/dev/lp0
file cups-brf:/
network ipp
network https
network http
network ipps
serial serial:/dev/ttyS0?baud=115200
network lpd
network socket
direct usb://Brother/DCP-L2530DW%20series?serial=E78276J9N267603
direct hp
direct hpfax
network smb
pierre@pierre:~$ 

Pour la suivante, j'attends que ça se termine, ça fait déjà 1/4 h ...

Hors ligne

#8 Le 10/01/2020, à 13:23

pierrequiroule

Re : [RÉSOLU] imprimante scanner Brother DCP-L2530DW

tail -f /var/log/cups/error_log

La commande ci-dessus tourne depuis plus d'1/2 h, je laisse tourner.

La suite :

pierre@pierre:~$ cat /var/log/cups/error_log
E [10/Jan/2020:09:22:34 +0100] [cups-deviced] PID 13984 (gutenprint52+usb) stopped with status 1!
E [10/Jan/2020:12:42:53 +0100] [cups-deviced] PID 29295 (gutenprint52+usb) stopped with status 1!
pierre@pierre:~$ 
pierre@pierre:~$ sudo cat /etc/cups/printers.conf
[sudo] Mot de passe de pierre : 
# Printer configuration file for CUPS v2.2.7
# Written by cupsd
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer DCPJ315W>
UUID urn:uuid:e310a8fc-de72-3995-5c40-f4a7997e5a4c
Info DCPJ315W
MakeModel Brother DCP-J315W CUPS
DeviceURI usb://Brother/DCP-J315W
State Idle
StateTime 1578596971
ConfigTime 1513439050
Type 8392780
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</Printer>
<DefaultPrinter DCPL2530DW>
UUID urn:uuid:a1a6d34e-e713-3ed0-61ac-95b29cc0feca
Info DCPL2530DW
MakeModel Brother DCPL2530DW for CUPS 
DeviceURI usb://dev/usb/lp0
State Idle
StateTime 1578644596
ConfigTime 1578644559
Type 8425492
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</DefaultPrinter>
pierre@pierre:~$ 
pierre@pierre:~$ sudo cat /etc/cups/cupsd.conf
[sudo] Mot de passe de pierre : 
#
#
# Sample configuration file for the CUPS scheduler.  See "man cupsd.conf" for a
# complete description of this file.
#

# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
LogLevel warn

# Deactivate CUPS' internal logrotating, as we provide a better one, especially
# LogLevel debug2 gets usable now
MaxLogSize 0

# Administrator user group...
SystemGroup lpadmin


# Only listen for connections from the local machine.
Listen localhost:631
Listen /var/run/cups/cups.sock

# Show shared printers on the local network.
Browsing Off
BrowseLocalProtocols dnssd

# Default authentication type, when authentication is required...
DefaultAuthType Basic

# Web interface setting...
WebInterface Yes

# Restrict access to the server...
<Location />
  Order allow,deny
</Location>

# Restrict access to the admin pages...
<Location /admin>
  Order allow,deny
</Location>

# Restrict access to configuration files...
<Location /admin/conf>
  AuthType Default
  Require user @SYSTEM
  Order allow,deny
</Location>

# Set the default printer/job policies...
<Policy default>
  # Job/subscription privacy...
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default

  # Job-related operations must be done by the owner or an administrator...
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    Order deny,allow
  </Limit>

  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  # All administration operations require an administrator to authenticate...
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # All printer operations require a printer operator to authenticate...
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # Only the owner or an administrator can cancel or authenticate a job...
  <Limit Cancel-Job CUPS-Authenticate-Job>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  <Limit All>
    Order deny,allow
  </Limit>
</Policy>

# Set the authenticated printer/job policies...
<Policy authenticated>
  # Job/subscription privacy...
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default

  # Job-related operations must be done by the owner or an administrator...
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    AuthType Default
    Order deny,allow
  </Limit>

  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  # All administration operations require an administrator to authenticate...
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # All printer operations require a printer operator to authenticate...
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # Only the owner or an administrator can cancel or authenticate a job...
  <Limit Cancel-Job CUPS-Authenticate-Job>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  <Limit All>
    Order deny,allow
  </Limit>
</Policy>

#
#
pierre@pierre:~$ 

Hors ligne

#9 Le 10/01/2020, à 14:43

sylvain3800

Re : [RÉSOLU] imprimante scanner Brother DCP-L2530DW

salut ,
la commande comencant par tail.... tu peux la fermer , c'etait une petite erreur de ma part...:D
merci pouir les autres retours :
idle veut dire : tout roule , l'imprimante est prete a imprimmer
ce que je vois de problematique :

pierrequiroule a écrit :

pierre@pierre:~$ lpstat -t
scheduler is running
system default destination: DCPL2530DW
matériel pour DCPJ315W : usb://Brother/DCP-J315W
matériel pour DCPL2530DW : usb://dev/usb/lp0
DCPJ315W accepte des requêtes depuis jeu. 09 janv. 2020 20:09:31 CET
DCPL2530DW accepte des requêtes depuis ven. 10 janv. 2020 09:23:16 CET
printer DCPJ315W is idle.  enabled since jeu. 09 janv. 2020 20:09:31 CET
printer DCPL2530DW now printing DCPL2530DW-1555.  enabled since ven. 10 janv. 2020 09:23:16 CET
    Waiting for printer to become available
DCPJ315W-1475           anonymous         1024   dim. 15 sept. 2019 17:01:14 CEST
DCPJ315W-1476           anonymous         1024   dim. 15 sept. 2019 17:01:30 CEST
DCPJ315W-1477           anonymous         1024   dim. 15 sept. 2019 17:02:14 CEST
DCPJ315W-1478           anonymous         1024   dim. 15 sept. 2019 17:04:14 CEST
DCPJ315W-1479           anonymous         1024   dim. 15 sept. 2019 17:04:18 CEST
DCPL2530DW-1555         root              1024   ven. 10 janv. 2020 09:23:16 CET
DCPL2530DW-1557         pierre            1024   ven. 10 janv. 2020 09:35:57 CET
pierre@pierre:~$

1)ton imprimante a un travail en attente demandé par root qui bloque car elle est pas accessible .
2) l'adresse usb de cette imprimante est pas bonne non plus cups essaye de passer par un port parallele .
3)il y a une autre imprimante brother la DCPj315W qui est installé sur ton PC et qui lui a un bon addressage mais que tu n'as visiblement plus utilisé depuis septembre

alors tu va commencer par cela
donne le retour de ces comamndes

lprm 
sudo lprm

cela va purger la derniere impression en attente.
la comamnde avec le sudo c'est si l'impression demandé par root ne peux pas etre supprimé par toi

ensuite rends toi sur le serveur de cups :
http://localhost:631/printers
tu devrais avoir accees a tes 2 imprimantes brother , tu va  passer par l interface pour virer la brother DCPJ315W qui ne te sers a rien (si je me trompe dis le moi , tu as peut etre 2 imprimantes et dans ce cas lá il ne faut pas virer la DCPJ315Wi )
ensuite tu cliquera sur ton  DCPL2530DW
et via l'onglet a gauche tu essaye de lancer l'impression d'une page de test.
tiens moi au courant de l#impression ou non de la page de test.
les autres retour de commandes sont bon , le  printers.conf est aussi conforme aux erreurs données par la  commande lpstat -t
donc il va surement falloir reinstaller ton imprimante pour avoir un addressage correcte.


Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#10 Le 10/01/2020, à 15:11

pierrequiroule

Re : [RÉSOLU] imprimante scanner Brother DCP-L2530DW

Salut,

Le travail en attente est une "page de test", restée dans la file d'impression. Je l'annule via paramètres / périphériques / imprimantes.
Pour le port usb, je l'ai branchée en lieu et place de la précédente (dcp-j315w).
La dcpj315w, je l'ai utilisée ces derniers jours, jusqu'à ce qu'elle refuse d'imprimer suite à un bourrage papier (il n' a plus de papier mais j'ai toujours un message de bourrage et un bruit bizarre, elle n'a pas dû supporter le débourrage ; je l'ai gardée près d'une dizaine d'années je crois).

pierre@pierre:~$ lprm
lprm : Aucune tâche active sur DCPL2530DW.
pierre@pierre:~$ sudo lprm
[sudo] Mot de passe de pierre : 
lprm : Aucune tâche active sur DCPL2530DW.

Après avoir supprimé la tâche en attente graphiquement donc (voir au début de ce message).

Dans mon navigateur, onglet http://localhost:631/printers/DCPL2530DW :
J'ai demandé l'impression d'une page de test. Elle apparaît en bas de page.
En dessous de la mention "state" :
processing since
Fri 10 Jan 2020 03:00:50 PM CET
"Waiting for printer to become available."

Donc la page ne s'est pas imprimée.
La tâche n'apparaît pas dans la file d'attente visible dans paramètres / périphériques / imprimantes.

Je n'avais pas désinstallé la dcp-j315w par espoir qu'elle ressuscite smile
Voilà

Hors ligne

#11 Le 10/01/2020, à 15:36

sylvain3800

Re : [RÉSOLU] imprimante scanner Brother DCP-L2530DW

bon ben c'est bien l'addressage qui fonctionne pas. tu va utiliser l'interface cups pour modifier ton DCPL2530DW .
tu clique sur l'onglet administration et tu choisi modifier.
il faut que ton imprimante soit relié a ton ordi sous la forme : usb://Brother/DCPL2530DW
et plus sous la forme usb://dev/usb/lp0.
c'est ton but
tu dois pouvoir modifier tout ceci .
si l'interface cups te demande ton nom et ton password : ton nom c'est pierre et ton password c'est ton password administarateur lorsque tu utilise sudo


Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#12 Le 10/01/2020, à 15:57

pierrequiroule

Re : [RÉSOLU] imprimante scanner Brother DCP-L2530DW

Alors avant d'avoir lu ton denier message sylvain3800, j'avais viré les deux imprimantes depuis cups. Puis j'ai refait l'installation avec les pilotes brother via driver install tool comme indiqué plus haut au #1.
Alléluia ça marche wink

l'installation :

pierre@pierre:~$ cd Téléchargements
pierre@pierre:~/Téléchargements$ sudo bash linux-brprinter-installer-2.2.1-1
[sudo] Mot de passe de pierre : 
Input model name ->dcp-l2530dw

You are going to install following packages.
   dcpl2530dwpdrv-4.0.0-1.i386.deb
   brscan4-0.4.8-1.amd64.deb
   brscan-skey-0.2.4-1.amd64.deb
OK? [y/N] ->y

dpkg -x dcpl2530dwpdrv-4.0.0-1.i386.deb /
dpkg-deb: building package 'dcpl2530dwpdrv' in 'dcpl2530dwpdrv-4.0.0-1a.i386.deb'.
dpkg -b ./brother_driver_packdir dcpl2530dwpdrv-4.0.0-1a.i386.deb
dpkg -i --force-all dcpl2530dwpdrv-4.0.0-1a.i386.deb
(Lecture de la base de données... 326877 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de dcpl2530dwpdrv-4.0.0-1a.i386.deb ...
lpadmin : The printer or class does not exist.
Dépaquetage de dcpl2530dwpdrv:i386 (4.0.0-1) sur (4.0.0-1) ...
Paramétrage de dcpl2530dwpdrv:i386 (4.0.0-1) ...
lpadmin -p DCPL2530DW -E -v usb://Brother/DCP-L2530DW%20series?serial=E78276J9N267603 -P /usr/share/ppd/brother/brother-DCPL2530DW-cups-en.ppd
#
Will you specify the Device URI? [Y/n] ->n

Test Print? [y/N] ->y

wait 5s.
lpr -P DCPL2530DW /usr/share/cups/data/testprint
You are going to install following packages.
   brscan4-0.4.8-1.amd64.deb
dpkg -i --force-all brscan4-0.4.8-1.amd64.deb
(Lecture de la base de données... 326877 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de brscan4-0.4.8-1.amd64.deb ...
Dépaquetage de brscan4 (0.4.8-1) sur (0.4.8-1) ...
Paramétrage de brscan4 (0.4.8-1) ...
This software is based in part on the work of the Independent JPEG Group.
You are going to install following packages.
   brscan-skey-0.2.4-1.amd64.deb
dpkg -i --force-all brscan-skey-0.2.4-1.amd64.deb
(Lecture de la base de données... 326877 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de brscan-skey-0.2.4-1.amd64.deb ...
Dépaquetage de brscan-skey (0.2.4-1) sur (0.2.4-1) ...
Paramétrage de brscan-skey (0.2.4-1) ...
Hit Enter/Return key.
pierre@pierre:~/Téléchargements$ 

Question 1)
Quelle différence entre l'installation via driver install tool et celle par l'exécution du script de démonipuch (voir #1) ?
Sont-ce les mêmes paquets qui sont installés dans les deux cas ?

Question 2)
Depuis ces quelques manip', j'ai un souci avec l'utilitaire de scan xsane. La fenêtre "aperçu" s'ouvre vide.
J'ai tenté de réinstaller xsane via synaptic. La première fois la fenêtre aperçu s'ouvre correctement. Puis si je ferme puis ouvre à nouveau xsane, de nouveau la fenêtre aperçu s'ouvre vide.
Bon on a dévié un peu du sujet mais il y a probablement un lien avec les manip' effectuées ces deux derniers jours car ça fonctionnait très bien auparavant.

Merci en tous cas @sylvain3800 pour ton aide.

Hors ligne

#13 Le 10/01/2020, à 16:25

sylvain3800

Re : [RÉSOLU] imprimante scanner Brother DCP-L2530DW

Bon ben tant mieux , supprimer puis reeinstaller l'imprimante a donc permis de bien configurer celle ci.
question 1 : le script de demonipuch est selon moi beaucoup plus ancien , il permettait de telecharger et  d#installer les imprimantes pour les utilisateur qui n'arrivait pas a installer les paquets .deb dispo a l'epoque sur le site de Brother le script pertmetait 'installation automatique de la partie imprimante et de la partie scanner avec selection du modele  et permettait aussi de faire face aux probleme lors des changements de versions d'ubuntu (tous les 6 mois) il y avait aussi le suivi de Demonipuch qui etait enorme et la mise á jour du script achaque nouveau modele ou version d'ubuntu   .
depuis peu Brother fournis lui aussi un script permettant d'automatiser les taches .
il y a longtemps que jen'ai pas regardé le script de demonipuch et je n'ai pas du tout regardé le script de brother. mais il y a fort a parier que ce sont les memes pilotes qui sont installé par les 2 scripts. puisque a l'epoque le scripte de Demonipuch permetait de telecharger les pilotes du site de Brother. je ne pense pas que cela ai changé .... mais cela fait ongtemps que je n'ai plus de Brother chez moi , donc je ne sais pas.

question 2 pour savoir quels manip tu as fait ces 2 derniers jours sur le terminal il y a la commande history que tu peux passer .
si tu as un probleme de configuration de xsane.conf alors la suppression et la reinstallation sans purge des fichiers de confs va te laisser le probleme là , maistu peux tenter une reinstallation via le terminal en utilisant cette commande :

sudo apt-get install xsane --reinstall

si cela ne suffit pas

sudo apt remove xsane --purge

suivi de

sudo apt install xsane

devrait regler le soucis.
@++

Dernière modification par sylvain3800 (Le 10/01/2020, à 16:27)


Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#14 Le 10/01/2020, à 17:13

pierrequiroule

Re : [RÉSOLU] imprimante scanner Brother DCP-L2530DW

Concernant xsane, j'ai tenté quelques manip' qui vont dans le sens de ce que tu indiques, avec ma maladresse.
J'ai par exemple fait désinstallation complète (donc avec les fichiers de conf' je crois) puis installation avec synaptic.
Ça ne règle pas le problème, ou pas durablement.

Voici à quoi ressemble la fenêtre d'aperçu de xsane :
1578675195.png
Désolé pour le placard mais je n'arrive pas à insérer une vignette.

Hors ligne

#15 Le 10/01/2020, à 17:39

pierrequiroule

Re : [RÉSOLU] imprimante scanner Brother DCP-L2530DW

Alors voilà.

sudo apt-get install xsane --reinstall

Le problème demeure.

Puis :

sudo apt remove xsane --purge
sudo apt autoremove
sudo apt install xsane

Et c'est pareil. Ça marche une première fois. Puis je ferme xsane et le relance, et la fenêtre d'aperçu ne s'affiche pas correctement.
hmm

Hors ligne

#16 Le 10/01/2020, à 18:32

pierrequiroule

Re : [RÉSOLU] imprimante scanner Brother DCP-L2530DW

Petit retour.

En parcourant des sujets sur xsane, j'ai eu l'idée de le lancer depuis un terminal pour vor ce que ça dit.
Et bien ça ne dit rien, ça marche impec' avec la fenêtre d'aperçu normale.
Je ferme et ouvre à plusieurs reprises depuis le lanceur. Oh surprise, ça marche normalement.
Je ne sais pas si le fait d'ouvrir depuis le terminal a résolu quoi que ce soit, mais il semble que ça tient le coup...

Je marque ce sujet en [RÉSOLU]  smile

Hors ligne