#151 Le 02/02/2019, à 16:43
- nany
Re : [RESOLU] Error code (1)
Attends avant de mettre résolu, j’aimerais continuer mes expérience avec ton nouveau noyau.
Donne les retours de :
sudo sed -i 's/ nomodeset//' /etc/default/grub && grep X_D /etc/default/grubsudo update-grubRedémarre et dis ce qu’il en est puis donne les retours de :
dmesg -warndmesg -lerrdmesg -lcritHors ligne
#152 Le 02/02/2019, à 17:14
- Gégé92
Re : [RESOLU] Error code (1)
J'aime bien les personnes qui essayent d'aller jusqu'au bout du bout et je te suis.
papygege@papygege-MS-7367:~$ sudo sed -i 's/ nomodeset//' /etc/default/grub && grep X_D /etc/default/grub
[sudo] Mot de passe de papygege :
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
papygege@papygege-MS-7367:~$ papygege@papygege-MS-7367:~$ sudo update-grub
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.15.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-43-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-141-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-141-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Microsoft Windows XP Professionnel trouvé sur /dev/sda1
Ubuntu 12.04.5 LTS (12.04) trouvé sur /dev/sda5
Microsoft Windows XP Professionnel trouvé sur /dev/sdb1
fait
papygege@papygege-MS-7367:~$ Reboot
Hors ligne
#153 Le 02/02/2019, à 17:29
- Gégé92
Re : [RESOLU] Error code (1)
Mode recovery
papygege@papygege-MS-7367:~$ dmesg -warn
dmesg : option invalide -- 'a'Désolé pour ce retour. Suite :
papygege@papygege-MS-7367:~$ dmesg -lerr
[ 0.024000] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
[ 3.273895] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[ 3.545979] ata3: softreset failed (device not ready)
[ 30.598224] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
papygege@papygege-MS-7367:~$ Retour vide pour la 3ème commande ?!?!
Hors ligne
#154 Le 02/02/2019, à 17:33
- nany
Re : [RESOLU] Error code (1)
Au temps pour moi :
dmesg -lwarnHors ligne
#155 Le 02/02/2019, à 17:38
- Gégé92
Re : [RESOLU] Error code (1)
Voilà voilà:
papygege@papygege-MS-7367:~$ dmesg -lwarn
[ 2.015215] ACPI: duty_cycle spans bit 4
[ 2.549155] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.551526] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 2.551570] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 2.551614] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 2.551657] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 2.551700] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 2.551743] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 2.551786] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 2.551830] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 2.551873] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 2.600444] ------------[ cut here ]------------
[ 2.600491] x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
[ 2.600552] WARNING: CPU: 0 PID: 1 at /build/linux-hwe-fQc_eW/linux-hwe-4.15.0/arch/x86/mm/dump_pagetables.c:266 note_page+0x5ec/0x790
[ 2.600600] Modules linked in:
[ 2.600739] EIP: note_page+0x5ec/0x790
[ 2.600779] EFLAGS: 00010282 CPU: 0
[ 2.600820] EAX: 00000041 EBX: f6a05f44 ECX: c8e34548 EDX: 00000000
[ 2.600862] ESI: 80000000 EDI: 00000000 EBP: f6a05f10 ESP: f6a05ee4
[ 2.600903] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 2.600944] CR0: 80050033 CR2: b7de0783 CR3: 08e20000 CR4: 000006f0
[ 2.601383] ---[ end trace fa6ad54900d834bf ]---
[ 3.013843] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.283573] ata1.01: limited to UDMA/33 due to 40-wire cable
[ 3.546023] ata3: applying PMP SRST workaround and retrying
[ 30.686507] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B06 (\SMOV) (20170831/utaddress-247)
[ 31.918618] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 31.918632] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 40.473684] new mount options do not match the existing superblock, will be ignored
[ 68.433765] kauditd_printk_skb: 21 callbacks suppressed
papygege@papygege-MS-7367:~$ dmesg -lwarndmesg -lwarndmesg -lwarndmesg -lwarndmesg -lwarndmesg -lwarndmesg -lwarndmesg -lwarndmesg -lwarnHors ligne
#156 Le 02/02/2019, à 17:57
- nany
Re : [RESOLU] Error code (1)
Ok, allons y pour les expériences. 
Donne les retour de :
sudo sed -i 's/splash/splash nomodeset radeon.modeset=1/' /etc/default/grub && grep X_D /etc/default/grubsudo sed -i 's/blacklist radeonfb/#blacklist radeonfb/' /etc/modprobe.d/blacklist-framebuffer.conf && grep radeon /etc/modprobe.d/blacklist-framebuffer.confsudo sed -i 's/blacklist radeonfb/#blacklist radeonfb/' /etc/modprobe.d/fbdev-blacklist.conf && grep radeon /etc/modprobe.d/fbdev-blacklist.confsudo update-initramfs -u -k allsudo update-grubRedémarre et dis nous ce qu’il en est puis donne le retour de :
dmesg -lcrit -lerr -lwarnHors ligne
#157 Le 02/02/2019, à 18:09
- Gégé92
Re : [RESOLU] Error code (1)
Expérimentons :
papygege@papygege-MS-7367:~$ sudo sed -i 's/splash/splash nomodeset radeon.modeset=1/' /etc/default/grub && grep X_D /etc/default/grub
[sudo] Mot de passe de papygege :
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset radeon.modeset=1"
papygege@papygege-MS-7367:~$ papygege@papygege-MS-7367:~$ sudo sed -i 's/blacklist radeonfb/#blacklist radeonfb/' /etc/modprobe.d/blacklist-framebuffer.conf && grep radeon /etc/modprobe.d/blacklist-framebuffer.conf
#blacklist radeonfb
papygege@papygege-MS-7367:~$ papygege@papygege-MS-7367:~$ sudo update-initramfs -u -k all
update-initramfs: Generating /boot/initrd.img-4.15.0-43-generic
update-initramfs: Generating /boot/initrd.img-4.4.0-141-generic
papygege@papygege-MS-7367:~$ papygege@papygege-MS-7367:~$ sudo update-grub
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.15.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-43-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-141-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-141-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Microsoft Windows XP Professionnel trouvé sur /dev/sda1
Ubuntu 12.04.5 LTS (12.04) trouvé sur /dev/sda5
Microsoft Windows XP Professionnel trouvé sur /dev/sdb1
fait
papygege@papygege-MS-7367:~$ Reboot
Hors ligne
#158 Le 02/02/2019, à 18:19
- Gégé92
Re : [RESOLU] Error code (1)
Recovery
papygege@papygege-MS-7367:~$ dmesg -lcrit -lerr -lwarn
[ 0.024000] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
[ 2.013817] ACPI: duty_cycle spans bit 4
[ 2.545162] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.547535] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 2.547579] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 2.547623] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 2.547666] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 2.547709] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 2.547753] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 2.547796] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 2.547839] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 2.547883] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 2.596468] ------------[ cut here ]------------
[ 2.596518] x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
[ 2.596581] WARNING: CPU: 0 PID: 1 at /build/linux-hwe-fQc_eW/linux-hwe-4.15.0/arch/x86/mm/dump_pagetables.c:266 note_page+0x5ec/0x790
[ 2.596629] Modules linked in:
[ 2.596771] EIP: note_page+0x5ec/0x790
[ 2.596811] EFLAGS: 00010282 CPU: 0
[ 2.596853] EAX: 00000041 EBX: f6a05f44 ECX: d3e34548 EDX: 00000000
[ 2.596894] ESI: 80000000 EDI: 00000000 EBP: f6a05f10 ESP: f6a05ee4
[ 2.596936] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 2.596978] CR0: 80050033 CR2: b7da8783 CR3: 13e20000 CR4: 000006f0
[ 2.597415] ---[ end trace d440c3b026b5b8d1 ]---
[ 3.043956] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.290301] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[ 3.295571] ata1.01: limited to UDMA/33 due to 40-wire cable
[ 3.548020] ata3: softreset failed (device not ready)
[ 3.548064] ata3: applying PMP SRST workaround and retrying
[ 30.404308] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[ 30.527860] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B06 (\SMOV) (20170831/utaddress-247)
[ 30.943040] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 30.943054] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 40.256954] new mount options do not match the existing superblock, will be ignored
[ 65.816548] kauditd_printk_skb: 21 callbacks suppressed
papygege@papygege-MS-7367:~$ Hors ligne
#159 Le 02/02/2019, à 18:36
- nany
Re : [RESOLU] Error code (1)
Il manque une commande.
Repasse ça (toujours en donnant les retours) :
sudo sed -i 's/blacklist radeonfb/#blacklist radeonfb/' /etc/modprobe.d/fbdev-blacklist.conf && grep radeon /etc/modprobe.d/fbdev-blacklist.confsudo update-initramfs -u -k allsudo update-grubEt redémarre.
Hors ligne
#160 Le 03/02/2019, à 01:01
- Gégé92
Re : [RESOLU] Error code (1)
On y va:
papygege@papygege-MS-7367:~$ sudo sed -i 's/blacklist radeonfb/#blacklist radeonfb/' /etc/modprobe.d/fbdev-blacklist.conf && grep radeon /etc/modprobe.d/fbdev-blacklist.conf
[sudo] Mot de passe de papygege :
#blacklist radeonfb
papygege@papygege-MS-7367:~$ papygege@papygege-MS-7367:~$ sudo update-initramfs -u -k all
update-initramfs: Generating /boot/initrd.img-4.15.0-43-generic
update-initramfs: Generating /boot/initrd.img-4.4.0-141-generic
papygege@papygege-MS-7367:~$ papygege@papygege-MS-7367:~$ sudo update-grubCréation du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.15.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-43-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-141-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-141-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Microsoft Windows XP Professionnel trouvé sur /dev/sda1
Ubuntu 12.04.5 LTS (12.04) trouvé sur /dev/sda5
Microsoft Windows XP Professionnel trouvé sur /dev/sdb1
fait
papygege@papygege-MS-7367:~$ Reboot
Hors ligne
#161 Le 03/02/2019, à 01:10
- Gégé92
Re : [RESOLU] Error code (1)
Recovey mode
Bonne nuit, à tout à l'heure.
Hors ligne
#162 Le 03/02/2019, à 10:15
- nany
Re : [RESOLU] Error code (1)
Continuons encore une fois. Donne les retours de :
sudo sed -i 's/radeon.modeset=1/xorg-driver=fbdev/' /etc/default/grub && grep X_D /etc/default/grubsudo update-grubRedémarre et donne les retours de :
dmesgdmesg -lerrHors ligne
#163 Le 04/02/2019, à 11:40
- Gégé92
Re : [RESOLU] Error code (1)
Un peu lent le Gégé ! Tes retours:
papygege@papygege-MS-7367:~$ sudo sed -i 's/radeon.modeset=1/xorg-driver=fbdev/' /etc/default/grub && grep X_D /etc/default/grub
[sudo] Mot de passe de papygege :
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset xorg-driver=fbdev"
papygege@papygege-MS-7367:~$ papygege@papygege-MS-7367:~$ sudo update-grub
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.15.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-43-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-141-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-141-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Microsoft Windows XP Professionnel trouvé sur /dev/sda1
Microsoft Windows XP Professionnel trouvé sur /dev/sdb1
Ubuntu 12.04.5 LTS (12.04) trouvé sur /dev/sdb5
fait
papygege@papygege-MS-7367:~$ Reboot
Hors ligne
#164 Le 04/02/2019, à 11:52
- Gégé92
Re : [RESOLU] Error code (1)
Mode NORMAL
papygege@papygege-MS-7367:~$ dmesg
[ 0.000000] Linux version 4.15.0-43-generic (buildd@lgw01-amd64-007) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10)) #46~16.04.1-Ubuntu SMP Fri Dec 7 13:30:54 UTC 2018 (Ubuntu 4.15.0-43.46~16.04.1-generic 4.15.18)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000037fcffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037fd0000-0x0000000037fddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000037fde000-0x0000000037ffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: MICRO-STAR INTERANTIONAL CO.,LTD MS-7367/MS-7367, BIOS V3.2 10/15/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x37fd0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFE0000000 write-back
[ 0.000000] 1 base 0020000000 mask FFF0000000 write-back
[ 0.000000] 2 base 0030000000 mask FFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [(ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x133fffff]
[ 0.000000] Base memory trampoline at [(ptrval)] 9b000 size 16384
[ 0.000000] BRK [0x12f8c000, 0x12f8cfff] PGTABLE
[ 0.000000] BRK [0x12f8d000, 0x12f8dfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31de0000-0x34ee7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F9B10 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x0000000037FD0000 00003C (v01 101507 RSDT1322 20071015 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x0000000037FD0200 000084 (v02 101507 FACP1322 20071015 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x0000000037FD0430 004271 (v01 1ADNC 1ADNCB33 00000B33 INTL 20051117)
[ 0.000000] ACPI: FACS 0x0000000037FDE000 000040
[ 0.000000] ACPI: APIC 0x0000000037FD0390 00005C (v01 101507 APIC1322 20071015 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x0000000037FD03F0 00003C (v01 101507 OEMMCFG 20071015 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x0000000037FDE040 000071 (v01 101507 OEMB1322 20071015 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x0000000037FD46B0 000038 (v01 101507 OEMHPET 20071015 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x0000000037FD46F0 0000F4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 7MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] BRK [0x12f8e000, 0x12f8efff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff]
[ 0.000000] HighMem [mem 0x00000000377fe000-0x0000000037fcffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000037fcffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000037fcffff]
[ 0.000000] On node 0 totalpages: 229230
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 2180 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2002 pages, LIFO batch:0
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x38000000-0xffefffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x7f/0x432 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 30 pages/cpu @(ptrval) s93068 r0 d29812 u122880
[ 0.000000] pcpu-alloc: s93068 r0 d29812 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 227010
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-43-generic root=UUID=ebb6c711-6012-40ad-8876-973011d955aa ro quiet splash nomodeset xorg-driver=fbdev vt.handoff=7
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:00037fd0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 839432K/916920K available (8863K kernel code, 891K rwdata, 3468K rodata, 1092K init, 848K bss, 77488K reserved, 0K cma-reserved, 8008K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
cpu_entry : 0xffa00000 - 0xffb39000 (1252 kB)
pkmap : 0xff800000 - 0xffa00000 (2048 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xd2d03000 - 0xd2e14000 (1092 kB)
.data : 0xd28a7db4 - 0xd2cefd80 (4383 kB)
.text : 0xd2000000 - 0xd28a7db4 (8863 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] ftrace: allocating 37861 entries in 74 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
[ 0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 1048576 bytes of page_ext
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 1895.605 MHz processor
[ 0.024000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3791.21 BogoMIPS (lpj=7582420)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.024000] mce: CPU supports 5 MCE banks
[ 0.024000] LVT offset 0 assigned for vector 0xf9
[ 0.024000] process: using AMD E400 aware idle routine
[ 0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.024000] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.024000] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
[ 0.024000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.044000] smpboot: CPU0: AMD Sempron(tm) Processor LE-1100 (family: 0xf, model: 0x7f, stepping: 0x1)
[ 0.044000] Performance Events: AMD PMU driver.
[ 0.044000] ... version: 0
[ 0.044000] ... bit width: 48
[ 0.044000] ... generic registers: 4
[ 0.044000] ... value mask: 0000ffffffffffff
[ 0.044000] ... max period: 00007fffffffffff
[ 0.044000] ... fixed-purpose events: 0
[ 0.044000] ... event mask: 000000000000000f
[ 0.044000] Hierarchical SRCU implementation.
[ 0.044000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.044000] smp: Bringing up secondary CPUs ...
[ 0.044000] smp: Brought up 1 node, 1 CPU
[ 0.044000] smpboot: Max logical packages: 2
[ 0.044000] smpboot: Total of 1 processors activated (3791.21 BogoMIPS)
[ 0.044000] devtmpfs: initialized
[ 0.044000] evm: security.selinux
[ 0.044000] evm: security.SMACK64
[ 0.044000] evm: security.SMACK64EXEC
[ 0.044000] evm: security.SMACK64TRANSMUTE
[ 0.044000] evm: security.SMACK64MMAP
[ 0.044000] evm: security.apparmor
[ 0.044000] evm: security.ima
[ 0.044000] evm: security.capability
[ 0.044000] PM: Registering ACPI NVS region [mem 0x37fde000-0x37ffffff] (139264 bytes)
[ 0.044000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.044000] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.044000] pinctrl core: initialized pinctrl subsystem
[ 0.044000] RTC time: 10:42:20, date: 02/04/19
[ 0.044000] NET: Registered protocol family 16
[ 0.044000] audit: initializing netlink subsys (disabled)
[ 0.044000] EISA bus registered
[ 0.044000] cpuidle: using governor ladder
[ 0.044000] cpuidle: using governor menu
[ 0.044000] node 0 link 0: io port [1000, ffffff]
[ 0.044000] TOM: 0000000040000000 aka 1024M
[ 0.044000] node 0 link 0: mmio [f0000000, f7feffff]
[ 0.044000] node 0 link 0: mmio [e0000000, efffffff]
[ 0.044000] node 0 link 0: mmio [40000000, dfffffff]
[ 0.044000] node 0 link 0: mmio [a0000, bffff]
[ 0.044000] node 0 link 0: mmio [f7ff0000, ffffffff]
[ 0.044000] bus: [bus 00-ff] on node 0 link 0
[ 0.044000] bus: 00 [io 0x0000-0xffff]
[ 0.044000] bus: 00 [mem 0x40000000-0xfcffffffff]
[ 0.044000] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.044000] ACPI: bus type PCI registered
[ 0.044000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.044000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.044000] PCI: not using MMCONFIG
[ 0.045885] PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.045960] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.045961] PCI: Using configuration type 1 for base access
[ 0.048018] audit: type=2000 audit(1549276940.040:1): state=initialized audit_enabled=0 res=1
[ 0.049803] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.050267] ACPI: Added _OSI(Module Device)
[ 0.050269] ACPI: Added _OSI(Processor Device)
[ 0.050270] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.050271] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.050273] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.050275] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.050653] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.055350] ACPI: Interpreter enabled
[ 0.055394] ACPI: (supports S0 S1 S4 S5)
[ 0.055396] ACPI: Using IOAPIC for interrupt routing
[ 0.055456] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.057163] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.057165] PCI: Using MMCONFIG for extended config space
[ 0.057174] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.057604] ACPI: Enabled 7 GPEs in block 00 to 1F
[ 0.069657] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.069666] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.069675] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.070206] PCI host bridge to bus 0000:00
[ 0.070210] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.070212] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.070215] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.070217] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.070220] pci_bus 0000:00: root bus resource [mem 0x38000000-0xdfffffff window]
[ 0.070222] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[ 0.070225] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.070237] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000
[ 0.070427] pci 0000:00:01.0: [1002:7912] type 01 class 0x060400
[ 0.070614] pci 0000:00:07.0: [1002:7917] type 01 class 0x060400
[ 0.070639] pci 0000:00:07.0: enabling Extended Tags
[ 0.070674] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.070854] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
[ 0.070881] pci 0000:00:12.0: reg 0x10: [io 0xc000-0xc007]
[ 0.070893] pci 0000:00:12.0: reg 0x14: [io 0xb000-0xb003]
[ 0.070905] pci 0000:00:12.0: reg 0x18: [io 0xa000-0xa007]
[ 0.070917] pci 0000:00:12.0: reg 0x1c: [io 0x9000-0x9003]
[ 0.070929] pci 0000:00:12.0: reg 0x20: [io 0x8000-0x800f]
[ 0.070941] pci 0000:00:12.0: reg 0x24: [mem 0xfe7ff800-0xfe7ffbff]
[ 0.070970] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.071141] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[ 0.071164] pci 0000:00:13.0: reg 0x10: [mem 0xfe7fe000-0xfe7fefff]
[ 0.071391] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[ 0.071414] pci 0000:00:13.1: reg 0x10: [mem 0xfe7fd000-0xfe7fdfff]
[ 0.071634] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[ 0.071657] pci 0000:00:13.2: reg 0x10: [mem 0xfe7fc000-0xfe7fcfff]
[ 0.071881] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[ 0.071905] pci 0000:00:13.3: reg 0x10: [mem 0xfe7fb000-0xfe7fbfff]
[ 0.072143] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[ 0.072166] pci 0000:00:13.4: reg 0x10: [mem 0xfe7fa000-0xfe7fafff]
[ 0.072390] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[ 0.072417] pci 0000:00:13.5: reg 0x10: [mem 0xfe7ff000-0xfe7ff0ff]
[ 0.072519] pci 0000:00:13.5: supports D1 D2
[ 0.072521] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.072943] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.075063] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
[ 0.082774] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[ 0.082796] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.082808] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.082820] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.082832] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.082844] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.082870] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.082872] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.082874] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.082876] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.083033] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.083066] pci 0000:00:14.2: reg 0x10: [mem 0xfe7f4000-0xfe7f7fff 64bit]
[ 0.083153] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.083306] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[ 0.083534] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.083743] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.083901] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.084129] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.084274] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.084486] pci 0000:01:05.0: [1002:791e] type 00 class 0x030000
[ 0.084502] pci 0000:01:05.0: reg 0x10: [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.084510] pci 0000:01:05.0: reg 0x18: [mem 0xfe9f0000-0xfe9fffff 64bit]
[ 0.084517] pci 0000:01:05.0: reg 0x20: [io 0xd000-0xd0ff]
[ 0.084523] pci 0000:01:05.0: reg 0x24: [mem 0xfe800000-0xfe8fffff]
[ 0.084553] pci 0000:01:05.0: supports D1 D2
[ 0.084624] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.084629] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.084632] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.084637] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.084706] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.084738] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.084766] pci 0000:02:00.0: reg 0x18: [mem 0xfeaff000-0xfeafffff 64bit]
[ 0.084798] pci 0000:02:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.084808] pci 0000:02:00.0: enabling Extended Tags
[ 0.084894] pci 0000:02:00.0: supports D1 D2
[ 0.084896] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.084994] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.085004] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.085009] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.085012] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.085080] pci 0000:03:03.0: [1814:0301] type 00 class 0x028000
[ 0.085112] pci 0000:03:03.0: reg 0x10: [mem 0xfebf8000-0xfebfffff]
[ 0.085337] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.085345] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.085351] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.085353] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.085356] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.085358] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.085360] pci 0000:00:14.4: bridge window [mem 0x38000000-0xdfffffff window] (subtractive decode)
[ 0.085363] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[ 0.085380] pci_bus 0000:00: on NUMA node 0
[ 0.086464] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.086553] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.086639] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.086725] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.086812] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.086898] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *7 10 11 12 14 15)
[ 0.086983] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.087070] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.087727] SCSI subsystem initialized
[ 0.087816] libata version 3.00 loaded.
[ 0.087903] pci 0000:01:05.0: vgaarb: setting as boot VGA device
[ 0.087907] pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.087910] pci 0000:01:05.0: vgaarb: bridge control possible
[ 0.087911] vgaarb: loaded
[ 0.087957] ACPI: bus type USB registered
[ 0.087991] usbcore: registered new interface driver usbfs
[ 0.088021] usbcore: registered new interface driver hub
[ 0.088043] usbcore: registered new device driver usb
[ 0.088162] EDAC MC: Ver: 3.0.0
[ 0.088706] PCI: Using ACPI for IRQ routing
[ 0.088710] PCI: pci_cache_line_size set to 64 bytes
[ 0.089304] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.089308] e820: reserve RAM buffer [mem 0x37fd0000-0x37ffffff]
[ 0.089519] NetLabel: Initializing
[ 0.089520] NetLabel: domain hash size = 128
[ 0.089521] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.089550] NetLabel: unlabeled traffic allowed by default
[ 0.089791] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.089799] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.091847] clocksource: Switched to clocksource hpet
[ 0.115937] VFS: Disk quotas dquot_6.6.0
[ 0.115969] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.116210] AppArmor: AppArmor Filesystem Enabled
[ 0.116281] pnp: PnP ACPI init
[ 0.116551] system 00:00: [mem 0x38000000-0x3fffffff] has been reserved
[ 0.116562] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.116655] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.117017] pnp 00:02: [dma 0 disabled]
[ 0.117142] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.117475] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.117478] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.117486] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.117773] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.117776] system 00:04: [io 0x040b] has been reserved
[ 0.117779] system 00:04: [io 0x04d6] has been reserved
[ 0.117781] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.117784] system 00:04: [io 0x0c14] has been reserved
[ 0.117786] system 00:04: [io 0x0c50-0x0c51] has been reserved
[ 0.117789] system 00:04: [io 0x0c52] has been reserved
[ 0.117791] system 00:04: [io 0x0c6c] has been reserved
[ 0.117794] system 00:04: [io 0x0c6f] has been reserved
[ 0.117796] system 00:04: [io 0x0cd0-0x0cd1] has been reserved
[ 0.117799] system 00:04: [io 0x0cd2-0x0cd3] has been reserved
[ 0.117801] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
[ 0.117804] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
[ 0.117806] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
[ 0.117812] system 00:04: [io 0x0800-0x089f] has been reserved
[ 0.117815] system 00:04: [io 0x0b10-0x0b1f] has been reserved
[ 0.117818] system 00:04: [io 0x0900-0x090f] has been reserved
[ 0.117820] system 00:04: [io 0x0910-0x091f] has been reserved
[ 0.117823] system 00:04: [io 0xfe00-0xfefe] has been reserved
[ 0.117826] system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.117829] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.117837] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.117932] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.118167] system 00:06: [io 0x0600-0x06df] has been reserved
[ 0.118170] system 00:06: [io 0x0ae0-0x0aef] has been reserved
[ 0.118178] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.118284] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.118293] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.118677] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.118681] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.118684] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.118687] system 00:08: [mem 0x00100000-0x37ffffff] could not be reserved
[ 0.118690] system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.118698] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.118868] pnp: PnP ACPI: found 9 devices
[ 0.118872] PnPBIOS: Disabled
[ 0.156534] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.156581] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.156584] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.156589] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.156593] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.156597] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.156600] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.156604] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.156610] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.156617] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.156630] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.156632] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.156635] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.156637] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.156639] pci_bus 0000:00: resource 8 [mem 0x38000000-0xdfffffff window]
[ 0.156642] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.156644] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.156646] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
[ 0.156648] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.156651] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.156653] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.156656] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.156658] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.156660] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.156662] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.156665] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.156667] pci_bus 0000:03: resource 8 [mem 0x38000000-0xdfffffff window]
[ 0.156669] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.156799] NET: Registered protocol family 2
[ 0.157083] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.157112] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.157160] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.157228] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.157241] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.157325] NET: Registered protocol family 1
[ 0.584414] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.584424] PCI: CLS 64 bytes, default 64
[ 0.584533] Unpacking initramfs...
[ 2.010372] Freeing initrd memory: 50208K
[ 2.010562] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a5e86aa43, max_idle_ns: 881590497014 ns
[ 2.010656] Scanning for low memory corruption every 60 seconds
[ 2.011702] Initialise system trusted keyrings
[ 2.011719] Key type blacklist registered
[ 2.011796] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 2.016715] zbud: loaded
[ 2.017671] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.018187] fuse init (API version 7.26)
[ 2.020780] Key type asymmetric registered
[ 2.020783] Asymmetric key parser 'x509' registered
[ 2.020804] bounce: pool size: 64 pages
[ 2.020846] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 2.020907] io scheduler noop registered
[ 2.020909] io scheduler deadline registered
[ 2.021076] io scheduler cfq registered (default)
[ 2.021764] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 2.021765] vesafb: scrolling: redraw
[ 2.021768] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 2.021800] vesafb: framebuffer at 0xf0000000, mapped to 0x(ptrval), using 5120k, total 5120k
[ 2.022031] Console: switching to colour frame buffer device 160x64
[ 2.022089] fb0: VESA VGA frame buffer device
[ 2.022280] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.022319] ACPI: Power Button [PWRB]
[ 2.022425] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.022444] ACPI: Power Button [PWRF]
[ 2.022514] ACPI: duty_cycle spans bit 4
[ 2.023040] isapnp: Scanning for PnP cards...
[ 2.028613] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.093052] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.099128] Linux agpgart interface v0.103
[ 2.103067] loop: module loaded
[ 2.103563] libphy: Fixed MDIO Bus: probed
[ 2.103565] tun: Universal TUN/TAP device driver, 1.6
[ 2.103660] PPP generic driver version 2.4.2
[ 2.103743] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.103749] ehci-pci: EHCI PCI platform driver
[ 2.103995] ehci-pci 0000:00:13.5: EHCI Host Controller
[ 2.104056] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 2.104064] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 2.104080] ehci-pci 0000:00:13.5: debug port 1
[ 2.104145] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe7ff000
[ 2.147780] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 2.147911] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.147914] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.147916] usb usb1: Product: EHCI Host Controller
[ 2.147918] usb usb1: Manufacturer: Linux 4.15.0-43-generic ehci_hcd
[ 2.147919] usb usb1: SerialNumber: 0000:00:13.5
[ 2.148175] hub 1-0:1.0: USB hub found
[ 2.148193] hub 1-0:1.0: 10 ports detected
[ 2.148657] ehci-platform: EHCI generic platform driver
[ 2.148685] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.148692] ohci-pci: OHCI PCI platform driver
[ 2.148908] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.148917] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 2.148965] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe7fe000
[ 2.240294] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.240297] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.240299] usb usb2: Product: OHCI PCI host controller
[ 2.240301] usb usb2: Manufacturer: Linux 4.15.0-43-generic ohci_hcd
[ 2.240303] usb usb2: SerialNumber: 0000:00:13.0
[ 2.240535] hub 2-0:1.0: USB hub found
[ 2.240550] hub 2-0:1.0: 2 ports detected
[ 2.240944] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 2.240953] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 2.241008] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe7fd000
[ 2.332275] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.332278] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.332280] usb usb3: Product: OHCI PCI host controller
[ 2.332282] usb usb3: Manufacturer: Linux 4.15.0-43-generic ohci_hcd
[ 2.332284] usb usb3: SerialNumber: 0000:00:13.1
[ 2.332527] hub 3-0:1.0: USB hub found
[ 2.332542] hub 3-0:1.0: 2 ports detected
[ 2.332941] ohci-pci 0000:00:13.2: OHCI PCI host controller
[ 2.332950] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 2.333002] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe7fc000
[ 2.376657] isapnp: No Plug & Play device found
[ 2.396104] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.396106] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.396108] usb usb4: Product: OHCI PCI host controller
[ 2.396110] usb usb4: Manufacturer: Linux 4.15.0-43-generic ohci_hcd
[ 2.396112] usb usb4: SerialNumber: 0000:00:13.2
[ 2.396351] hub 4-0:1.0: USB hub found
[ 2.396366] hub 4-0:1.0: 2 ports detected
[ 2.396790] ohci-pci 0000:00:13.3: OHCI PCI host controller
[ 2.396800] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 2.396842] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe7fb000
[ 2.460239] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.460242] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.460244] usb usb5: Product: OHCI PCI host controller
[ 2.460246] usb usb5: Manufacturer: Linux 4.15.0-43-generic ohci_hcd
[ 2.460248] usb usb5: SerialNumber: 0000:00:13.3
[ 2.460500] hub 5-0:1.0: USB hub found
[ 2.460515] hub 5-0:1.0: 2 ports detected
[ 2.460899] ohci-pci 0000:00:13.4: OHCI PCI host controller
[ 2.460908] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 2.460945] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe7fa000
[ 2.524114] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.524117] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.524119] usb usb6: Product: OHCI PCI host controller
[ 2.524121] usb usb6: Manufacturer: Linux 4.15.0-43-generic ohci_hcd
[ 2.524123] usb usb6: SerialNumber: 0000:00:13.4
[ 2.524359] hub 6-0:1.0: USB hub found
[ 2.524374] hub 6-0:1.0: 2 ports detected
[ 2.524591] ohci-platform: OHCI generic platform driver
[ 2.524617] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.524755] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.524757] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.525556] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.525774] mousedev: PS/2 mouse device common for all mice
[ 2.526019] rtc_cmos 00:01: RTC can wake from S4
[ 2.526179] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.526211] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.526231] i2c /dev entries driver
[ 2.526244] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[ 2.526484] device-mapper: uevent: version 1.0.3
[ 2.526637] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 2.526682] platform eisa.0: Probing EISA bus 0
[ 2.526685] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 2.526689] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 2.526692] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 2.526695] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 2.526698] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 2.526701] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 2.526703] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 2.526706] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 2.526709] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 2.526712] platform eisa.0: EISA: Detected 0 cards
[ 2.526718] cpufreq_nforce2: No nForce2 chipset
[ 2.526734] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.527262] NET: Registered protocol family 10
[ 2.537783] Segment Routing with IPv6
[ 2.537824] NET: Registered protocol family 17
[ 2.537911] Key type dns_resolver registered
[ 2.538241] Using IPI No-Shortcut mode
[ 2.538499] registered taskstats version 1
[ 2.538517] Loading compiled-in X.509 certificates
[ 2.546047] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.548367] Loaded X.509 cert 'Build time autogenerated kernel key: 58368bea2397795591c6cc102a57505f406b124f'
[ 2.548405] zswap: loaded using pool lzo/zbud
[ 2.558905] Key type big_key registered
[ 2.558912] Key type trusted registered
[ 2.564203] Key type encrypted registered
[ 2.564209] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.564214] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 2.564226] ima: Allocated hash algorithm: sha1
[ 2.564257] evm: HMAC attrs: 0x1
[ 2.564915] Magic number: 7:19:729
[ 2.565058] rtc_cmos 00:01: setting system clock to 2019-02-04 10:42:22 UTC (1549276942)
[ 2.565355] powernow_k8: fid 0xb (1900 MHz), vid 0xc
[ 2.565357] powernow_k8: fid 0xa (1800 MHz), vid 0xd
[ 2.565358] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[ 2.565386] powernow_k8: Found 1 AMD Sempron(tm) Processor LE-1100 (1 cpu cores) (version 2.20.00)
[ 2.565396] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.565397] EDD information not available.
[ 2.567958] Freeing unused kernel memory: 1092K
[ 2.576086] Write protecting the kernel text: 8864k
[ 2.576141] Write protecting the kernel read-only data: 3492k
[ 2.576142] NX-protecting the kernel data: 7520k
[ 2.576293] ------------[ cut here ]------------
[ 2.576299] x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
[ 2.576319] WARNING: CPU: 0 PID: 1 at /build/linux-hwe-fQc_eW/linux-hwe-4.15.0/arch/x86/mm/dump_pagetables.c:266 note_page+0x5ec/0x790
[ 2.576321] Modules linked in:
[ 2.576327] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-43-generic #46~16.04.1-Ubuntu
[ 2.576333] Hardware name: MICRO-STAR INTERANTIONAL CO.,LTD MS-7367/MS-7367, BIOS V3.2 10/15/2007
[ 2.576337] EIP: note_page+0x5ec/0x790
[ 2.576338] EFLAGS: 00010282 CPU: 0
[ 2.576340] EAX: 00000041 EBX: f6a05f44 ECX: d2e34548 EDX: 00000000
[ 2.576341] ESI: 80000000 EDI: 00000000 EBP: f6a05f10 ESP: f6a05ee4
[ 2.576343] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 2.576345] CR0: 80050033 CR2: b7dfc783 CR3: 12e20000 CR4: 000006f0
[ 2.576347] Call Trace:
[ 2.576356] ptdump_walk_pgd_level_core+0x284/0x2e0
[ 2.576361] ptdump_walk_pgd_level_checkwx+0x18/0x20
[ 2.576366] mark_rodata_ro+0xf5/0x111
[ 2.576374] ? rest_init+0x90/0x90
[ 2.576377] kernel_init+0x33/0xf0
[ 2.576383] ret_from_fork+0x2e/0x38
[ 2.576386] Code: fa ff ff 83 c2 0c c7 43 18 00 00 00 00 89 53 14 e9 1a fd ff ff 8b 43 0c c6 05 e8 48 cc d2 01 50 50 68 8c 26 af d2 e8 54 74 00 00 <0f> 0b 83 c4 0c e9 74 fa ff ff ff 72 10 68 7e 25 af d2 e8 0c 51
[ 2.576423] ---[ end trace 5d027ae877bb4fa3 ]---
[ 2.576543] x86/mm: Checked W+X mappings: FAILED, 96 W+X pages found.
[ 2.605592] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.605786] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.605832] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.832097] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 2.984214] scsi host0: pata_atiixp
[ 2.991108] scsi host1: pata_atiixp
[ 2.991208] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.991210] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.993684] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.993701] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.994258] r8169 0000:02:00.0 eth0: RTL8168b/8111b at 0x(ptrval), 00:1d:92:3f:75:5d, XID 18000000 IRQ 24
[ 2.994262] r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 3.002424] ahci 0000:00:12.0: version 3.0
[ 3.002639] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 3.002761] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 3.002766] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
[ 3.012268] scsi host2: ahci
[ 3.019870] scsi host3: ahci
[ 3.026121] scsi host4: ahci
[ 3.036132] scsi host5: ahci
[ 3.036267] ata3: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff900 irq 22
[ 3.036271] ata4: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff980 irq 22
[ 3.036274] ata5: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa00 irq 22
[ 3.036277] ata6: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa80 irq 22
[ 3.128212] usb 2-1: New USB device found, idVendor=046d, idProduct=08b2
[ 3.128217] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.247934] [drm] VGACON disable radeon kernel modesetting.
[ 3.248016] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[ 3.255222] ata1.00: ATAPI: HL-DT-ST DVD-ROM GDR-H30N, 1.00, max UDMA/33
[ 3.255450] ata1.01: ATA-6: ST3200822A, 3.01, max UDMA/100
[ 3.255453] ata1.01: 390721968 sectors, multi 16: LBA48
[ 3.255460] ata1.01: limited to UDMA/33 due to 40-wire cable
[ 3.260377] ata1.00: configured for UDMA/33
[ 3.284627] ata1.01: configured for UDMA/33
[ 3.285778] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR-H30N 1.00 PQ: 0 ANSI: 5
[ 3.329598] sr 0:0:0:0: [sr0] scsi3-mmc drive: 4x/52x cd/rw xa/form2 cdda tray
[ 3.329602] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.329814] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 3.330019] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 3.330581] scsi 0:0:1:0: Direct-Access ATA ST3200822A 3.01 PQ: 0 ANSI: 5
[ 3.330987] sd 0:0:1:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 3.331009] sd 0:0:1:0: [sda] Write Protect is off
[ 3.331012] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 3.331044] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.331542] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 3.354443] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.358902] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.358938] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.374763] sda: sda1 sda2 < sda5 sda6 >
[ 3.376250] sd 0:0:1:0: [sda] Attached SCSI disk
[ 3.517978] ata3: softreset failed (device not ready)
[ 3.517985] ata3: applying PMP SRST workaround and retrying
[ 3.644020] usb 3-1: new low-speed USB device number 2 using ohci-pci
[ 3.680033] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.726137] ata3.00: ATA-7: MAXTOR STM380211AS, 3.AAE, max UDMA/133
[ 3.726140] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.726144] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.784446] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.784449] ata3.00: configured for UDMA/133
[ 3.784646] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM380211 E PQ: 0 ANSI: 5
[ 3.785548] sd 2:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 3.785569] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.785572] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.785604] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.786053] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.843058] usb 3-1: New USB device found, idVendor=046d, idProduct=c00c
[ 3.843062] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.843064] usb 3-1: Product: USB Mouse
[ 3.843066] usb 3-1: Manufacturer: Logitech
[ 3.857520] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.872592] usbcore: registered new interface driver usbhid
[ 3.872594] usbhid: USB HID core driver
[ 3.872992] sdb: sdb1 sdb2 < sdb5 sdb6 >
[ 3.873668] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3.909205] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/0003:046D:C00C.0001/input/input3
[ 3.909911] hid-generic 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.1-1/input0
[ 4.216785] random: fast init done
[ 5.038181] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.563539] random: crng init done
[ 5.563544] random: 7 urandom warning(s) missed due to ratelimiting
[ 6.976071] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 6.976309] systemd[1]: Detected architecture x86.
[ 6.990495] systemd[1]: Set hostname to <papygege-MS-7367>.
[ 10.244134] systemd[1]: Listening on Journal Socket (/dev/log).
[ 10.244527] systemd[1]: Created slice User and Session Slice.
[ 10.244616] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 10.244690] systemd[1]: Listening on udev Kernel Socket.
[ 10.244780] systemd[1]: Listening on udev Control Socket.
[ 10.244864] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 10.244894] systemd[1]: Reached target User and Group Name Lookups.
[ 10.932894] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[ 11.983792] systemd[1]: Started Load/Save Random Seed.
[ 12.158980] lp: driver loaded but no devices found
[ 12.175648] systemd[1]: Started Journal Service.
[ 12.305644] ppdev: user-space parallel port driver
[ 12.525657] systemd-journald[228]: Received request to flush runtime journal from PID 1
[ 25.882021] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 26.327520] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B06 (\SMOV) (20170831/utaddress-247)
[ 26.327533] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 26.479378] [drm] VGACON disable radeon kernel modesetting.
[ 26.479493] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[ 26.883592] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 26.891423] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 27.247087] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 27.247102] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 27.280550] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c
[ 27.627113] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 27.706405] media: Linux media interface: v0.10
[ 27.799775] MCE: In-kernel MCE decoding enabled.
[ 27.846274] EDAC amd64: Node 0: DRAM ECC disabled.
[ 27.846277] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 27.849088] Linux video capture interface: v2.00
[ 27.923854] audit: type=1400 audit(1549276967.852:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=493 comm="apparmor_parser"
[ 27.923860] audit: type=1400 audit(1549276967.852:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=493 comm="apparmor_parser"
[ 27.933861] audit: type=1400 audit(1549276967.864:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=498 comm="apparmor_parser"
[ 27.933869] audit: type=1400 audit(1549276967.864:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=498 comm="apparmor_parser"
[ 27.933872] audit: type=1400 audit(1549276967.864:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=498 comm="apparmor_parser"
[ 27.933875] audit: type=1400 audit(1549276967.864:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=498 comm="apparmor_parser"
[ 28.430608] audit: type=1400 audit(1549276968.360:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=499 comm="apparmor_parser"
[ 28.430615] audit: type=1400 audit(1549276968.360:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=499 comm="apparmor_parser"
[ 28.430619] audit: type=1400 audit(1549276968.360:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=499 comm="apparmor_parser"
[ 28.430622] audit: type=1400 audit(1549276968.360:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=499 comm="apparmor_parser"
[ 29.137642] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 29.137656] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 29.137659] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 29.137661] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 29.137663] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 29.137665] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 29.137668] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 29.137670] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 29.137672] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 29.174873] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 29.174966] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 29.175055] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 29.175134] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 29.175211] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 29.175291] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 29.175370] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 29.175449] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 29.262011] pwc: Logitech QuickCam 4000 Pro USB webcam detected.
[ 29.474183] pwc: Registered as video0.
[ 29.474257] input: PWC snapshot button as /devices/pci0000:00/0000:00:13.0/usb2/2-1/input/input12
[ 29.476409] usbcore: registered new interface driver Philips webcam
[ 29.761975] usbcore: registered new interface driver snd-usb-audio
[ 32.313421] Adding 915452k swap on /dev/sdb6. Priority:-2 extents:1 across:915452k FS
[ 33.078344] new mount options do not match the existing superblock, will be ignored
[ 43.229312] NET: Registered protocol family 4
[ 43.311872] NET: Registered protocol family 5
[ 43.997087] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'
[ 44.017261] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8
[ 44.077366] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 49.141650] r8169 0000:02:00.0 eth0: link down
[ 49.141727] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 55.268208] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 55.924125] r8169 0000:02:00.0 eth0: link down
[ 55.924204] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 57.532198] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 61.462001] wlan0: authenticate with 26:97:ab:32:74:34
[ 61.484233] wlan0: send auth to 26:97:ab:32:74:34 (try 1/3)
[ 61.485721] wlan0: authenticated
[ 61.485751] rt61pci 0000:03:03.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 61.488782] wlan0: associate with 26:97:ab:32:74:34 (try 1/3)
[ 61.490921] wlan0: RX AssocResp from 26:97:ab:32:74:34 (capab=0x411 status=0 aid=1)
[ 61.491013] wlan0: associated
[ 61.492678] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 62.478850] kauditd_printk_skb: 21 callbacks suppressed
[ 62.478853] audit: type=1400 audit(1549277002.408:33): apparmor="DENIED" operation="open" profile="/sbin/dhclient" name="/var/lib/wicd/dhclient.conf" pid=1556 comm="dhclient" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 81.616791] audit: type=1400 audit(1549277021.548:34): apparmor="DENIED" operation="file_lock" profile="/usr/share/hplip/systray.py" name="/etc/xdg/Trolltech.conf" pid=1498 comm="python" requested_mask="k" denied_mask="k" fsuid=1000 ouid=0
[ 85.347345] audit: type=1400 audit(1549277025.278:35): apparmor="DENIED" operation="file_lock" profile="/usr/share/hplip/systray.py" name="/etc/xdg/sni-qt.conf" pid=1498 comm="python" requested_mask="k" denied_mask="k" fsuid=1000 ouid=0
papygege@papygege-MS-7367:~$ dmesgpapygege@papygege-MS-7367:~$ dmesg -lerr
[ 0.024000] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
[ 3.248016] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[ 3.517978] ata3: softreset failed (device not ready)
[ 26.479493] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
papygege@papygege-MS-7367:~$ Toujours ces petits défauts
A+
Hors ligne
#165 Le 04/02/2019, à 12:05
- NicoApi73
Re : [RESOLU] Error code (1)
Bonjour,
Peux tu donner STP :
sudo lshw -C displayDernière modification par NicoApi73 (Le 04/02/2019, à 12:05)
Hors ligne
#166 Le 04/02/2019, à 18:17
- Gégé92
Re : [RESOLU] Error code (1)
Salut NicoApi73, ta demande :
papygege@papygege-MS-7367:~$ sudo lshw -C display
[sudo] Mot de passe de papygege :
*-display NON-RÉCLAMÉ
description: VGA compatible controller
produit: RS690 [Radeon X1200]
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 5
information bus: pci@0000:01:05.0
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi vga_controller bus_master cap_list
configuration: latency=64
ressources: mémoire:f0000000-f7ffffff mémoire:fe9f0000-fe9fffff portE/S:d000(taille=256) mémoire:fe800000-fe8fffff mémoire:c0000-dffff
papygege@papygege-MS-7367:~$ A+
Hors ligne
#167 Le 04/02/2019, à 18:34
- nany
Re : [RESOLU] Error code (1)
Normal, on est en nomodeset. Enlevons le justement pour voir.
Donne les retours de :
sudo sed -i 's/ nomodeset//' /etc/default/grub && grep X_D /etc/default/grubsudo update-grubPuis redémarre.
Hors ligne
#168 Le 04/02/2019, à 18:47
- Gégé92
Re : [RESOLU] Error code (1)
C'est parti :
papygege@papygege-MS-7367:~$ sudo sed -i 's/ nomodeset//' /etc/default/grub && grep X_D /etc/default/grub
[sudo] Mot de passe de papygege :
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash xorg-driver=fbdev"
papygege@papygege-MS-7367:~$ papygege@papygege-MS-7367:~$ sudo update-grub
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.15.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-43-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-141-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-141-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Microsoft Windows XP Professionnel trouvé sur /dev/sda1
Microsoft Windows XP Professionnel trouvé sur /dev/sdb1
Ubuntu 12.04.5 LTS (12.04) trouvé sur /dev/sdb5
fait
papygege@papygege-MS-7367:~$ Reboot
Hors ligne
#169 Le 04/02/2019, à 18:56
- Gégé92
Re : [RESOLU] Error code (1)
Mode recovery
A+ Nany
Hors ligne
#170 Le 04/02/2019, à 19:26
- nany
Re : [RESOLU] Error code (1)
Ok. Donc pas le choix, il faut mettre nomodeset. On va donc tout remettre en état.
Donne les retours de :
sudo sed -i 's/xorg-driver=fbdev/nomodeset/' /etc/default/grub && grep X_D /etc/default/grubsudo sed -i 's/#blacklist radeonfb/blacklist radeonfb/' /etc/modprobe.d/blacklist-framebuffer.conf && grep radeon /etc/modprobe.d/blacklist-framebuffer.confsudo sed -i 's/#blacklist radeonfb/blacklist radeonfb/' /etc/modprobe.d/fbdev-blacklist.conf && grep radeon /etc/modprobe.d/fbdev-blacklist.confsudo update-initramfs -u -k allsudo update-grubPuis redémarre et donne le retour de :
dmesg -lerrSur ce, je vais manger et me coucher de bonne heure, j’ai du sommeil à rattraper.
Donc à demain sans doute.
Hors ligne
#171 Le 04/02/2019, à 19:48
- NicoApi73
Re : [RESOLU] Error code (1)
nany a écrit :
Normal, on est en nomodeset
J'avais raté nomodeset...
Hors ligne
#172 Le 05/02/2019, à 10:45
- Gégé92
Re : [RESOLU] Error code (1)
Coucou Nany j'espère que tu t'es bien reposé.
Tes retours :
papygege@papygege-MS-7367:~$ sudo sed -i 's/xorg-driver=fbdev/nomodeset/' /etc/default/grub && grep X_D /etc/default/grub
[sudo] Mot de passe de papygege :
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset"
papygege@papygege-MS-7367:~$ papygege@papygege-MS-7367:~$ sudo sed -i 's/#blacklist radeonfb/blacklist radeonfb/' /etc/modprobe.d/blacklist-framebuffer.conf && grep radeon /etc/modprobe.d/blacklist-framebuffer.conf
blacklist radeonfb
papygege@papygege-MS-7367:~$ papygege@papygege-MS-7367:~$ sudo sed -i 's/#blacklist radeonfb/blacklist radeonfb/' /etc/modprobe.d/fbdev-blacklist.conf && grep radeon /etc/modprobe.d/fbdev-blacklist.conf
blacklist radeonfb
papygege@papygege-MS-7367:~$ papygege@papygege-MS-7367:~$ sudo update-initramfs -u -k all
update-initramfs: Generating /boot/initrd.img-4.15.0-43-generic
update-initramfs: Generating /boot/initrd.img-4.4.0-141-generic
papygege@papygege-MS-7367:~$ papygege@papygege-MS-7367:~$ sudo update-grub
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.15.0-43-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-43-generic
Image Linux trouvée : /boot/vmlinuz-4.4.0-141-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.4.0-141-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Microsoft Windows XP Professionnel trouvé sur /dev/sda1
Ubuntu 12.04.5 LTS (12.04) trouvé sur /dev/sda5
Microsoft Windows XP Professionnel trouvé sur /dev/sdb1
fait
papygege@papygege-MS-7367:~$ Reboot
Hors ligne
#173 Le 05/02/2019, à 10:56
- Gégé92
Re : [RESOLU] Error code (1)
Mode NORMAL impec.
Le retour:
papygege@papygege-MS-7367:~$ dmesg -lerr
[ 0.024000] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
[ 3.251222] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
[ 3.504021] ata1: softreset failed (device not ready)
[ 29.592428] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon module!
papygege@papygege-MS-7367:~$ Voilà, j'espère que tous ces essais t'ont été profitables. Personnellement je n'ai pas tout compris même si j'entrevoie quelques subtilités de programmation.
A+
Hors ligne
#174 Le 05/02/2019, à 19:17
- nany
Re : [RESOLU] Error code (1)
Gégé92 a écrit :
Coucou Nany j'espère que tu t'es bien reposé.
Voui. 
Gégé92 a écrit :
Voilà, j'espère que tous ces essais t'ont été profitables.
C’est surtout à toi que ça peut être profitable.
Ce que je conclus de tout ça, c’est que seul le paramètre nomodeset (ou éventuellement radeon.modeset=0) est utile. J’avais espéré pouvoir trouver un ou des paramètres plus ciblés mais non, on se contentera donc de nomodeset.
Tu peux mettre le sujet résolu mais on attend tout de même de tes nouvelles quand tu auras étendu la mémoire de ta bécane.
Hors ligne
#175 Le 05/02/2019, à 23:31
- Gégé92
Re : [RESOLU] Error code (1)
Merci Nany et désolé de t'avoir monopolisé pendant si longtemps.
Je remercie aussi touts les participants à cette discution.
J'ai juste à ajouter 2 remarques pour lesquelles je n'attends pas de réponse uniquement à porter à votre réflexion :
_ pendant vos recherches je bricolais pour faire une live USB. J'ai téléchargé un .iso Ubuntu 16-04 32 bit. Lorsque je l'ai lancé j'ai eu l'affichage de "Ubuntu 17-10 64 bit" ??? De non, ? et écran sauteur.
_du fait de mes déboires et toujours pour faire une live USB je suis passé à Kubuntu 18-04 . Là pas trop mal sauf le WIFI comme avec ubuntu 16-04.
Merci encore , on se retrouvera dans une autre discussion 
Dernière modification par Gégé92 (Le 05/02/2019, à 23:37)
Hors ligne