#76 Le 04/03/2006, à 19:07
- michel2652
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Bonjour,
Est ce que tu as mis le kernel que tu as compilé hier ?
Le msg :
You appear to be comiling the NVIDIA kernel module with a different compiler
than the one that was used to compile the running kernel. The Linux 2.6 ker
nel module loader rejects kernel modules built with a version of gcc that do
es not exactly match that of the compiler used to build the running kernel.
The compiler used to compile the kernel was gcc 3.4; the current compiler is
gcc 4.0.
Il te faut reprendre le gcc-3.4 etc...
ERROR: Unable to load the kernel module 'nvidia.ko'. This is most likely
because the kernel module was built using the wrong kernel source files.
Please make sure you have installed the kernel source files for your
kernel and that they are properly configured; on Red Hat Linux systems,
for example, be sure you have the 'kernel-source' RPM installed. If you
know the correct kernel source files are installed, you may specify the
kernel source path with the '--kernel-source-path' command line option.
Il te faut ton kernel image (tu l'as) le headers et le restricted correspondant.
Dernière modification par michel2652 (Le 04/03/2006, à 19:09)
#77 Le 04/03/2006, à 19:38
- fantasmagorial
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Je les ai... regarde je n'invente rien ....
Dernière modification par fantasmagorial (Le 04/03/2006, à 19:39)
Hors ligne
#78 Le 04/03/2006, à 19:55
- michel2652
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Est ce que tu as linux-headers-2.6.12- (9, 10, enfin le nr du kernel utilisé) et linux-restricted-modules-2.6.12- (9, 10, enfin le nr du kernel utilisé)
Par exemple moi j'ai : linux-headers-2.6.12-10
linux-headers-2.6.12-10-686-smp
linux-image-2.6.12-10-686-smp
linux-restricted-modules-2.6.12-10-686-smp
A+
#79 Le 04/03/2006, à 20:08
- fantasmagorial
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Ben j'ai 2.6.12.2 (de toute façon c'est celui que benouil m'a fait compiler) et il n'y a pas de headers 2.6.12.2 dans le synaptic par exemple ... pour l'image c'est bon, Restricted pareil 2.6.12.2 n'existe pas.......................
Hors ligne
#80 Le 04/03/2006, à 20:28
- michel2652
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
J'ai bien compris, mais pour installer un driver il te faut les headers de ton noyau (ceux qui t'ont servi à compiler ton kernel)
C'est ce que disait benouill52
il te faut les kernel-source configurées pour installer le .run de nvidia
Dans le msg d'erreurs
the kernel module was built using the wrong kernel source files.
En gros, tu n'as pas les sources de ton kernel
A+
Dernière modification par michel2652 (Le 04/03/2006, à 20:33)
#81 Le 04/03/2006, à 20:32
- fantasmagorial
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Bah ok et je les installe comment les headers de mon noyau -_- puisqu'ils ne sont pas dans le synaptic
Hors ligne
#82 Le 04/03/2006, à 20:35
- michel2652
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Avec quoi as tu fait ton kernel-image-2.6.12-2-03-2006 ?
#83 Le 04/03/2006, à 20:39
- fantasmagorial
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
(de toute façon c'est celui que benouil m'a fait compiler)
> http://forum.ubuntu-fr.org/viewtopic.php?id=28672 -___-
Dernière modification par fantasmagorial (Le 04/03/2006, à 20:40)
Hors ligne
#84 Le 04/03/2006, à 21:03
- fantasmagorial
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
de plus je ne sais même pas si c'est la version 2.6.12 pile poil ou si c'est 2.6.12.x ......... c'était censé marcher comme ça on ne m'avait pas dit "ensuite il va falloir que tu galères pendant 72 autres heures pour pouvoir lancer ton .run" j'ai linux depuis maintenant un peu plus de 3 jours faut pas oublier que je ne sais pas compiler tout seul!
Dernière modification par fantasmagorial (Le 04/03/2006, à 21:04)
Hors ligne
#85 Le 04/03/2006, à 21:16
- michel2652
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Oui, c'est pour ça que je te disais de plutôt faire ça :
Tu gardes
linux-image-k7 2.6.12.16.1dans synaptic, tu sélectionne tout le reste pour suppression complète
linux-headers-2.6.12-9-k7
linux-headers-2.6.12-9
linux-restricted-modules-2.6.12-10-k7
linux-restricted-modules-common
linux-restricted-modules-k7,sauf les
nvidia-glx
nvidia-kernel-common
nvidia-settings
que tu sélectionnespour réinstallationEt tu sélectionnes pour installation les (je pensais qu'ils étaient dans synaptic)
linux headers2.6.12.16-k7
linux-restricted-modules-2.6.12.16-k7
Et ensuite tu aurais pu essayer avec les drivers d'Ubuntu .
Est ce qu'en démarrant sur ton ancien kernel (echap au démarrage), tu ne peux pas supprimer ce kernel optimisé et réinstaller un 2.6.12-10 par exemple (avec les headers et restricted correspondant) ?
A+
Dernière modification par michel2652 (Le 04/03/2006, à 21:16)
#86 Le 04/03/2006, à 21:19
- fantasmagorial
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Rah j'ai encore fait tout ça pour rien mais c'est pas vrai quoi ...........
je vais essayer merci ... !!
Hors ligne
#87 Le 04/03/2006, à 21:20
- michel2652
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
#88 Le 04/03/2006, à 21:29
- fantasmagorial
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Mais, moi j'ai un AMD donc je dois prendre les K7 on est bien d'accord? -_-
Hors ligne
#89 Le 04/03/2006, à 21:35
- michel2652
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
A l'install tu as un 386 (valable pour tout) et tu peux installer pourAMD un k7
#90 Le 04/03/2006, à 21:36
- fantasmagorial
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
O - K, si ça marche pas après ça j'me pend
Hors ligne
#91 Le 04/03/2006, à 21:55
- fantasmagorial
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
ça marche pas pitaing de b**** de m***** :'( même erreur pour le .run !!!
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sat Mar 4 21:52:55 2006option status:
license pre-accepted : false
update : false
force update : false
expert : false
uninstall : false
driver info : false
no precompiled interface: false
no ncurses color : false
query latest driver ver : false
OpenGL header files : true
no questions : false
silent : false
no backup : false
kernel module only : false
sanity : false
add this kernel : false
no runlevel check : false
no network : false
no ABI note : false
no RPMs : false
force tls : (not specified)
force compat32 tls : (not specified)
X install prefix : /usr/X11R6
OpenGL install prefix : /usr
compat32 install prefix : (not specified)
installer install prefix: /usr
utility install prefix : /usr
kernel name : (not specified)
kernel include path : (not specified)
kernel source path : (not specified)
kernel output path : (not specified)
kernel install path : (not specified)
proc mount point : /proc
ui : (not specified)
tmpdir : /tmp
ftp mirror : ftp://download.nvidia.com
RPM file list : (not specified)Using: nvidia-installer ncurses user interface
-> License accepted.
-> No precompiled kernel interface was found to match your kernel; would you li
ke the installer to attempt to download a kernel interface for your kernel f
rom the NVIDIA ftp site (ftp://download.nvidia.com)? (Answer: Yes)
-> No matching precompiled kernel interface was found on the NVIDIA ftp site;
this means that the installer will need to compile a kernel interface for
your kernel.
-> Performing CC test with CC="cc".
-> gcc-version-check failed:
You appear to be comiling the NVIDIA kernel module with a different compiler
than the one that was used to compile the running kernel. The Linux 2.6 ker
nel module loader rejects kernel modules built with a version of gcc that do
es not exactly match that of the compiler used to build the running kernel.
The compiler used to compile the kernel was gcc 3.4; the current compiler is
gcc 4.0.
If you know what you are doing and want to ignore the gcc version check, sel
ect "No" to continue installation. Otherwise, select "Yes" to abort install
ation, set the CC environment variable to the name of the compiler used to c
ompile your kernel, and restart installation. Abort now? (Answer: No)
-> Kernel source path: '/lib/modules/2.6.12-10-k7/build'
-> Kernel output path: '/lib/modules/2.6.12-10-k7/build'
-> Performing rivafb check.
-> Performing nvidiafb check.
-> Cleaning kernel module build directory.
executing: 'cd ./usr/src/nv; make clean'...
rm -f -f nv.o nv-vm.o os-agp.o os-interface.o os-registry.o nv.o nv-vm.o os-
agp.o os-interface.o os-registry.o nvidia.mod.o
rm -f -f build-in.o nv-linux.o *.d .*.{cmd,flags}
rm -f -f nvidia.{o,ko,mod.{o,c}} nv_compiler.h *~
rm -f -f stprof stprof.o symtab.h
rm -f -rf .tmp_versions
-> Building kernel module:
executing: 'cd ./usr/src/nv; make module SYSSRC=/lib/modules/2.6.12-10-k7/bu
ild SYSOUT=/lib/modules/2.6.12-10-k7/build'...
NVIDIA: calling KBUILD...
make CC=cc KBUILD_VERBOSE=1 -C /lib/modules/2.6.12-10-k7/build SUBDIRS=/tmp
/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv modules
mkdir -p /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/.tmp_vers
ions
make -f scripts/Makefile.build obj=/tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178
-pkg1/usr/src/nv
echo \#define NV_COMPILER \"`cc -v 2>&1 | tail -n 1`\" > /tmp/selfgz8017/NVI
DIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/nv_compiler.h
cc -Wp,-MD,/tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/.nv.o
.d -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.0.2/include -D__KERNEL_
_ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -
fno-common -ffreestanding -O2 -fomit-frame-pointer -pipe -msoft-float -m
preferred-stack-boundary=2 -fno-unit-at-a-time -march=athlon -Iinclude/asm-i
386/mach-default -Wdeclaration-after-statement -Wno-pointer-sign -I/tmp/self
gz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv -Wall -Wimplicit -Wreturn-t
ype -Wswitch -Wformat -
Wchar-subscripts -Wparentheses -Wpointer-arith -Wno-multichar -Werror -O -
fno-common -MD -Wsign-compare -Wno-cast-qual -Wno-error -D_LOOSE_KERNEL_NA
MES -D__KERNEL__ -DMODULE -DNTRM -DNVRM -DDYNAMIC_SLI -DNV_MAJOR_VERSION=1
-DNV_MINOR_VERSION=0 -DNV_PATCHLEVEL=8178 -UDEBUG -U_DEBUG -DNDEBUG -DNV_SI
GNAL_STRUCT_RLIM -DNV_MULTIPLE_BRIDGE_AGPGART_PRESENT -DNV_PCI_GET_CLASS_PRE
SENT -DNV_SYSCTL_MAX_MAP_COUNT_PRESENT -DNV_REMAP_PFN_RANGE_PRESENT -DNV_CHA
NGE_PAGE_ATTR_PRESENT -DNV_VMAP_4_PRESENT -DMODULE -DKBUILD_BASENAME=nv -DK
BUILD_MODNAME=nvidia -c -o /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/us
r/src/nv/.tmp_nv.o /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv
/nv.c
In file included from include/linux/list.h:7,
from include/linux/wait.h:23,
from include/asm/semaphore.h:41,
from include/linux/sched.h:20,
from include/linux/module.h:10,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/nv-linux.h:47,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/nv.c:14:
include/linux/prefetch.h: In function ‘prefetch_range’:
include/linux/prefetch.h:62: attention : pointer of type ‘void *’ used i
n arithmetic
In file included from include/linux/dmapool.h:14,
from include/linux/pci.h:864,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/nv-linux.h:71,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/nv.c:14:
include/asm/io.h: In function ‘check_signature’:
include/asm/io.h:253: attention : type d'argument erroné pour un incrément
/tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/nv.c: In function
‘nvidia_init_module’:
/tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/nv.c:1305: attenti
on : ‘pm_register’ is deprecated (declared at include/linux/pm.h:106)
/tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/nv.c:1423: attenti
on : ‘pm_unregister’ is deprecated (declared at include/linux/pm.h:111)
/tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/nv.c: In function
‘nvidia_exit_module’:
/tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/nv.c:1479: attenti
on : ‘pm_unregister’ is deprecated (declared at include/linux/pm.h:111)
cc -Wp,-MD,/tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/.nv-v
m.o.d -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.0.2/include -D__KERN
EL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasin
g -fno-common -ffreestanding -O2 -fomit-frame-pointer -pipe -msoft-float
-mpreferred-stack-boundary=2 -fno-unit-at-a-time -march=athlon -Iinclude/asm
-i386/mach-default -Wdeclaration-after-statement -Wno-pointer-sign -I/tmp/se
lfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv -Wall -Wimplicit -Wreturn
-type -Wswitch -Wformat -Wchar-subscripts -Wparentheses -Wpointer-arith -Wn
o-multichar -Werror -O -fno-common -MD -Wsign-compare -Wno-cast-qual -Wno
-error -D_LOOSE_KERNEL_NAMES -D__KERNEL__ -DMODULE -D
NTRM -DNVRM -DDYNAMIC_SLI -DNV_MAJOR_VERSION=1 -DNV_MINOR_VERSION=0 -DNV_PA
TCHLEVEL=8178 -UDEBUG -U_DEBUG -DNDEBUG -DNV_SIGNAL_STRUCT_RLIM -DNV_MULTIP
LE_BRIDGE_AGPGART_PRESENT -DNV_PCI_GET_CLASS_PRESENT -DNV_SYSCTL_MAX_MAP_COU
NT_PRESENT -DNV_REMAP_PFN_RANGE_PRESENT -DNV_CHANGE_PAGE_ATTR_PRESENT -DNV_V
MAP_4_PRESENT -DMODULE -DKBUILD_BASENAME=nv_vm -DKBUILD_MODNAME=nvidia -c -
o /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/.tmp_nv-vm.o /tm
p/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/nv-vm.c
In file included from include/linux/list.h:7,
from include/linux/wait.h:23,
from include/asm/semaphore.h:41,
from include/linux/sched.h:20,
from include/linux/module.h:10,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/nv-linux.h:47,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/nv-vm.c:14:
include/linux/prefetch.h: In function ‘prefetch_range’:
include/linux/prefetch.h:62: attention : pointer of type ‘void *’ used i
n arithmetic
In file included from include/linux/dmapool.h:14,
from include/linux/pci.h:864,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/nv-linux.h:71,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/nv-vm.c:14:
include/asm/io.h: In function ‘check_signature’:
include/asm/io.h:253: attention : type d'argument erroné pour un incrément
cc -Wp,-MD,/tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/.os-a
gp.o.d -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.0.2/include -D__KER
NEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasi
ng -fno-common -ffreestanding -O2 -fomit-frame-pointer -pipe -msoft-floa
t -mpreferred-stack-boundary=2 -fno-unit-at-a-time -march=athlon -Iinclude/a
sm-i386/mach-default -Wdeclaration-after-statement -Wno-pointer-sign -I/tmp/
selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv -Wall -Wimplicit -Wretu
rn-type
-Wswitch -Wformat -Wchar-subscripts -Wparentheses -Wpointer-arith -Wno-mul
tichar -Werror -O -fno-common -MD -Wsign-compare -Wno-cast-qual -Wno-erro
r -D_LOOSE_KERNEL_NAMES -D__KERNEL__ -DMODULE -DNTRM -DNVRM -DDYNAMIC_SLI
-DNV_MAJOR_VERSION=1 -DNV_MINOR_VERSION=0 -DNV_PATCHLEVEL=8178 -UDEBUG -U_D
EBUG -DNDEBUG -DNV_SIGNAL_STRUCT_RLIM -DNV_MULTIPLE_BRIDGE_AGPGART_PRESENT -
DNV_PCI_GET_CLASS_PRESENT -DNV_SYSCTL_MAX_MAP_COUNT_PRESENT -DNV_REMAP_PFN_R
ANGE_PRESENT -DNV_CHANGE_PAGE_ATTR_PRESENT -DNV_VMAP_4_PRESENT -DMODULE -DK
BUILD_BASENAME=os_agp -DKBUILD_MODNAME=nvidia -c -o /tmp/selfgz8017/NVIDIA-L
inux-x86-1.0-8178-pkg1/usr/src/nv/.tmp_os-agp.o /tmp/selfgz8017/NVIDIA-Linux
-x86-1.0-8178-pkg1/usr/src/nv/os-agp.c
In file included from include/linux/list.h:7,
from include/linux/wait.h:23,
from include/asm/semaphore.h:41,
from include/linux/sched.h:20,
from include/linux/module.h:10,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/nv-linux.h:47,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/os-agp.c:24:
include/linux/prefetch.h: In function ‘prefetch_range’:
include/linux/prefetch.h:62: attention : pointer of type ‘void *’ used i
n arithmetic
In file included from include/linux/dmapool.h:14,
from include/linux/pci.h:864,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/nv-linux.h:71,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/os-agp.c:24:
include/asm/io.h: In function ‘check_signature’:
include/asm/io.h:253: attention : type d'argument erroné pour un incrément
cc -Wp,-MD,/tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/.os-i
nterface.o.d -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.0.2/include -
D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-
aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -pipe -msof
t-float -mpreferred-stack-bou
ndary=2 -fno-unit-at-a-time -march=athlon -Iinclude/asm-i386/mach-default -W
declaration-after-statement -Wno-pointer-sign -I/tmp/selfgz8017/NVIDIA-Linux
-x86-1.0-8178-pkg1/usr/src/nv -Wall -Wimplicit -Wreturn-type -Wswitch -Wform
at -Wchar-subscripts -Wparentheses -Wpointer-arith -Wno-multichar -Werror
-O -fno-common -MD -Wsign-compare -Wno-cast-qual -Wno-error -D_LOOSE_KERNE
L_NAMES -D__KERNEL__ -DMODULE -DNTRM -DNVRM -DDYNAMIC_SLI -DNV_MAJOR_VERSI
ON=1 -DNV_MINOR_VERSION=0 -DNV_PATCHLEVEL=8178 -UDEBUG -U_DEBUG -DNDEBUG -D
NV_SIGNAL_STRUCT_RLIM -DNV_MULTIPLE_BRIDGE_AGPGART_PRESENT -DNV_PCI_GET_CLAS
S_PRESENT -DNV_SYSCTL_MAX_MAP_COUNT_PRESENT -DNV_REMAP_PFN_RANGE_PRESENT -DN
V_CHANGE_PAGE_ATTR_PRESENT -DNV_VMAP_4_PRESENT -DMODULE -DKBUILD_BASENAME=o
s_interface -DKBUILD_MODNAME=nvidia -c -o /tmp/selfgz8017/NVIDIA-Linux-x86-1
.0-8178-pkg1/usr/src/nv/.tmp_os-interface.o /tmp/selfgz8017/NVIDIA-Linux-x86
-1.0-8178-pkg1/usr/src/nv/os-interface.c
In file included from include/linux/list.h:7,
from include/linux/wait.h:23,
from include/asm/semaphore.h:41,
from include/linux/sched.h:20,
from include/linux/module.h:10,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/nv-linux.h:47,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/os-interface.c:26:
include/linux/prefetch.h: In function ‘prefetch_range’:
include/linux/prefetch.h:62: attention : pointer of type ‘void *’ used i
n arithmetic
In file included from include/linux/dmapool.h:14,
from include/linux/pci.h:864,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/nv-linux.h:71,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/os-interface.c:26:
include/asm/io.h: In function ‘check_signature’:
include/asm/io.h:253: attention : type d'argument erroné pour un incrément
cc -Wp,-MD,/tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/.os-r
egistry.o.d -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.0.2/include -D
__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-a
liasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -pipe -msoft
-float -mpreferred-stack-boundary=2 -fno-unit-at-a-time -march=athlon -Iincl
ude/asm-i386/mach-default -Wdeclaration-after-statement -Wno-pointer-sign -I
/tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv -Wall -Wimplicit -
Wreturn-type -Wswitch -Wformat -Wchar-subscripts -Wparentheses -Wpointer-ari
th -Wno-multichar -Werror -O -fno-common -MD -Wsign-compare -Wno-cast-qu
al -Wno-error -D_LOOSE_KERNEL_NAMES -D__KERNEL__ -DMODULE -DNTRM -DNVRM -DD
YNAMIC_SLI -DNV_MAJOR_VERSION=1 -DNV_MINOR_VERSION=0 -DNV_PATCHLEVEL=8178
-UDEBUG -U_DEBUG -DNDEBUG -DNV_SIGNAL_STRUCT_RLIM -DNV_MULTIPLE_BRIDGE_AGPGA
RT_PRESENT -DNV_PCI_GET_CLASS_PRESENT -DNV_SYSCTL_MAX_MAP_COUNT_PRESENT -DNV
_REMAP_PFN_RANGE_PRESENT -DNV_CHANGE_PAGE_ATTR_PRESENT -DNV_VMAP_4_PRESENT
-DMODULE -DKBUILD_BASENAME=os_registry -DKBUILD_MOD
NAME=nvidia -c -o /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/
.tmp_os-registry.o /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv
/os-registry.c
In file included from include/linux/list.h:7,
from include/linux/wait.h:23,
from include/asm/semaphore.h:41,
from include/linux/sched.h:20,
from include/linux/module.h:10,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/nv-linux.h:47,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/os-registry.c:14:
include/linux/prefetch.h: In function ‘prefetch_range’:
include/linux/prefetch.h:62: attention : pointer of type ‘void *’ used i
n arithmetic
In file included from include/linux/dmapool.h:14,
from include/linux/pci.h:864,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/nv-linux.h:71,
from /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src
/nv/os-registry.c:14:
include/asm/io.h: In function ‘check_signature’:
include/asm/io.h:253: attention : type d'argument erroné pour un incrément
ld -m elf_i386 -r -o /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/s
rc/nv/nvidia.o /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/nv-
kernel.o /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/nv.o /tmp
/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/nv-vm.o /tmp/selfgz801
7/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/os-agp.o /tmp/selfgz8017/NVIDIA-
Linux-x86-1.0-8178-pkg1/usr/src/nv/os-interface.o /tmp/selfgz8017/NVIDIA-Lin
ux-x86-1.0-8178-pkg1/usr/src/nv/os-registry.o
Building modules, stage 2.
make -rR -f /usr/src/linux-headers-2.6.12-10-k7/scripts/Makefile.modpost
scripts/mod/modpost -m -a -i /usr/src/linux-headers-2.6.12-10-k7/Module.sy
mvers /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/nvidia.o
Warning: could not find /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/s
rc/nv/.nv-kernel.o.cmd for /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/us
r/src/nv/nv-kernel.o
cc -Wp,-MD,/tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/.nvid
ia.mod.o.d -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.0.2/include -D_
_KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-al
iasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -pipe -msoft-
float -mpreferred-stack-boundary=2 -fno-unit-at-a-time -march=athlon -Iinclu
de/asm-i386/mach-default -Wdeclaration-after-statement -Wno-pointer-sign
-DKBUILD_BASENAME=nvidia -DKBUILD_MODNAME=nvidia -DMODULE -c -o /tmp/selfgz8
017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/nvidia.mod.o /tmp/selfgz8017/N
VIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/nvidia.mod.c
ld -m elf_i386 -r -o /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/sr
c/nv/nvidia.ko /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/nvi
dia.o /tmp/selfgz8017/NVIDIA-Linux-x86-1.0-8178-pkg1/usr/src/nv/nvidia.mod.o
NVIDIA: left KBUILD.
-> done.
-> Kernel module compilation complete.
ERROR: Unable to load the kernel module 'nvidia.ko'. This is most likely
because the kernel module was built using the wrong kernel source files.
Please make sure you have installed the kernel source files for your
kernel and that they are properly configured; on Red Hat Linux systems,
for example, be sure you have the 'kernel-source' RPM installed. If you
know the correct kernel source files are installed, you may specify the
kernel source path with the '--kernel-source-path' command line option.
-> Kernel module load error: insmod: error inserting './usr/src/nv/nvidia.ko':
-1 Invalid module format
-> Kernel messages:
[4294719.620000] Disabled Privacy Extensions on device c0321b80(lo)
[4294719.621000] IPv6 over IPv4 tunneling driver
[4294730.255000] eth0: no IPv6 routers present
[4294787.094000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa
on isa0060/serio0).
[4294787.094000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294787.152000] atkbd.c: Unknown key released (translated set 2, code 0xaa
on isa0060/serio0).
[4294787.152000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294787.225000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa
on isa0060/serio0).
[4294787.225000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294787.283000] atkbd.c: Unknown key released (translated set 2, code 0xaa
on isa0060/serio0).
[4294787.283000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294787.637000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa
on isa0060/serio0).
[4294787.637000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294787.776000] atkbd.c: Unknown key released (translated set 2, code 0xaa
on isa0060/serio0).
[4294787.776000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294794.136000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa
on isa0060/serio0).
[4294794.136000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294794.263000] atkbd.c: Unknown key released (translated set 2, code 0xaa
on isa0060/serio0).
[4294794.263000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294795.641000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa
on isa0060/serio0).
[4294795.641000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294795.860000] atkbd.c: Unknown key released (translated set 2, code 0xaa
on isa0060/serio0).
[4294795.860000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294805.315000] Linux agpgart interface v0.101 (c) Dave Jones
[4294805.350000] nvidia: version magic '2.6.12-10-k7 K7 gcc-4.0' should be
'2.6.12-10-k7 K7 gcc-3.4'
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.
J'y arriverai jamais a l'installer cette fouttue sortie TV.......
EDIT :
Par exemple moi j'ai : linux-headers-2.6.12-10
linux-headers-2.6.12-10-686-smp
linux-image-2.6.12-10-686-smp
linux-restricted-modules-2.6.12-10-686-smp
Je viens d'essayer avec ceux-là en K7 à la place de 686 et non smp ... pareil
Dernière modification par fantasmagorial (Le 04/03/2006, à 22:37)
Hors ligne
#92 Le 04/03/2006, à 22:44
- michel2652
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Est ce que tu pratiques bien comme ça pour installer ton driver .run
#93 Le 05/03/2006, à 00:05
- fantasmagorial
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Ouais je viens de tout refaire et PA - REIL! de plus c'est assez vieux et pour une version antérieure de pilote nvidia (7xxxx)
Je crois que je vais repasser sous windows ce sera plus simple -_-
Hors ligne
#94 Le 05/03/2006, à 00:38
- michel2652
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Est ce que tu pratiques bien comme ça pour installer ton driver .run
Ceci est un exemple, une procédure, les commandes sous Debian et Ubuntu sont similaires, les 2 utilisant apt-get.
C'est comme lorsque l'on dit : ~$ sudo dpkg -i nomdupaquet.deb. , c'est une commande à adapter.
Sur le lien que je t'ai donné, c'est la procédure qu'il faut suivre, les numéros de version de kernel et de driver nvidia ne sont là que pour l'exemple.
Mais, ceci mis à part, tu choisis la difficulté.
Compiler un noyau pour mettre un driver de carte graphique, au bout de 3 jours sur Ubuntu, c'est rare je crois.
Dans les dépots, il y a les drivers nvidia, pas les derniers, c'est vrai.
Mais l'important c'est d'avoir la 3D.
Après pour pratiquer le bi-écran, c'est une histoire de xorg.conf.
Il ne faut pas ètre trop pressé, il y a un temps d'apprentissage.
Tu as bien du apprendre à te servir de Windows ?
Et je suppose qu'au bout de 3 jours de Windows, tu n'as pas du t'amuser à vouloir modifier à la main les valeurs de ta base de registre ? (c'est un exemple...)
Prends ton temps, règle ta Breezy correctement, et fin avril tu passeras sous Dapper, et tu auras déjà compris beaucoup de choses.
Tiens regardes (sous Dapper) le driver nvidia :
" En ce moment, nous sommes en noyau 2.6.15-16.
La version du linux-restricted est 2.6.15.6-1 qui correspond bien au package nvidia-glx est 1.0.8178+2.6.15.6-1"
Mais prends ton temps, apprends, documente toi dans le Wiki, le Forum et ça roulera tout seul.
Allez, bonne continuation sous UBUNTU.
A+
#95 Le 05/03/2006, à 00:49
- fantasmagorial
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Ok mais, j'ai l'impression d'être le seul à avoir ce problème... sur google/linux quand je tape ne serais-ce que "8178" je tombe sur des problèmes qui ne sont pas les même que moi, quand je tape "no precompiled kernel interface............" c'est pareil rien qui puisse m'aider, j'ai cherché avec plein de mots clés et rien de rien qui puisse réglé mon problème, j'ai passé des heures à "essayer" si ou ça, et toujours rien.
J'utilise la sortie TV tous les jours et j'en ai besoin tous les jours, je ne vais pas retourner sous windows à chaque fois que je veux utiliser la sortie TV.... Regarde, toi et benouil vous êtes assez expérimenté j'ai l'impression, pourtant vous ne comprennez pas vous-même mon problème de sortie TV, comment est-ce que moi je peux le comprendre...
Il faut absolument que j'arrive à régler ce problème j'ai vraiment pas envie de devoir rebooter à chaque fois que je dois mettre ma sortie TV... Alors certes j'ai appris des choses, des commandes et je commence à comprendre le fonctionnement des kernels etc c'est vrai, mais j'ai quand-même l'impression d'être tout seul à galérer comme ça, à croire que personne n'a de CG XFX 6800 GT sous linux
Pourtant sur le site du driver il y a marqué :
Fixed a problem where certain precompiled kernel interfaces were not recognized.
Bah j'aimerai bien savoir depuis quand -___-
Mon xorg.conf je l'ai retourné dans tous les sens et ça ne m'a mené à rien si ce n'est que j'arrivai à passer l'écran sur la TV mais jamais les deux en même temps......
Hors ligne
#96 Le 05/03/2006, à 04:14
- fantasmagorial
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Tiens, voilà la tête de ma TV maintenant, pas pu m'empêcher de la prendre en photo, ça fait la même chose que quand je viens tout juste d'installer ubuntu, pour info, les couleurs bougent en fonction de ce qui se passe sur mon écran -__- :
ps : oui tout est correctement branché
Dernière modification par fantasmagorial (Le 05/03/2006, à 04:15)
Hors ligne
#97 Le 05/03/2006, à 04:20
- michel2652
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Ca me fait penser a un windows avec une résolution de 1280x1024 alors que l'écran ne supporte que 640x480.
J'ai un peu googleisé et j'ai rien trouvé de probant...
C'est quoi, ta résolution au fait ?
A+
Dernière modification par michel2652 (Le 05/03/2006, à 04:23)
#98 Le 05/03/2006, à 04:43
- fantasmagorial
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
attends parceque là, je viens de réussir à installer les drivers, il fallait :
choper build-essential
gcc-3.4
et virer nvidia-kernel-source
faire :
CC=gcc-3.4
Export CC
sudo sh NVIDIA-Linux-x86-1.0-8178-pkg1.run
du coup ben ils sont installé, mais ma TV ne redetecte plus rien, écran noir comme avant -_____________________________-
ps : ma résolution était 1024x748 mais celle de la TV étant censée etre en 640
ah, et j'ai une erreur "failed to initialize HAL!" mais bon ça n'a pas l'air de poser de problème je regarderai ce que c'est
EDIT :
ok ya du nouveau, quand j'ai réinstallé nvidia-glx et tout le bazarre pour mettre à jour le xorg, au reboot il m'a mi une merde comme quoi j'avais la version 1.0-8178 d'installé mais que j'avais un kernek 7xxx ou quelque chose de ce style là, heureusement que j'avais un backup de xorg qui s'est fait automatiquement parcequ'a force de formater j'oublie -____- du coup je suis repassé en 7xxx, et pour info, les couleurs sur l'écran de la TV s'affichent comme ça même sans activer de mod TV
Dernière modification par fantasmagorial (Le 05/03/2006, à 05:03)
Hors ligne
#99 Le 05/03/2006, à 05:05
- michel2652
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
Mais tu as l'image sur la TV seulement ou aussi sur l"écran PC
#100 Le 05/03/2006, à 05:09
- fantasmagorial
Re : [Résolu euh!]Sortie TV nvidia GEforce XFX 6800 GT PCIe
l'écran et la TV, mais t'appeles ça une image toi sur la TV lol?
mais tu vois, ne serais-ce que la barre qui clignote quand tu tapes un texte là ici dans ce forum par exemple, ça fait clignoter 1/4 de l'écran en bleu & violet
Dernière modification par fantasmagorial (Le 05/03/2006, à 05:11)
Hors ligne