Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#26 Le 23/11/2018, à 22:14

Toulibre

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Euh .. c'est vrai que j'avais galéré pour l'installation mais de là à dire que c'est un chipset sdio n'allons pas trop loin quand même ! smile
En fait je ne sais pas smile

#27 Le 23/11/2018, à 22:19

xubu1957

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Le 21/11/2018, moko138 a écrit :

Montre :

dmesg | grep -EiC2 "brcm|sdio|sdhci"

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#28 Le 23/11/2018, à 22:28

Nuliel

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

sdio c'est une sorte de port sd amélioré. Habituellement la carte wifi est sur un port pci, mais sur des petits pc il y a ce genre de connectique (sûrement pour éviter des coûts supplémentaires sur la carte mère)
Tu peux tenter de suivre http://ubuntuhandbook.org/index.php/201 … ot-ubuntu/ (3eme méthode)

Dernière modification par Nuliel (Le 23/11/2018, à 22:30)

Hors ligne

#29 Le 23/11/2018, à 22:38

Toulibre

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Instant de lecture pour les passionnés smile xubu1957 Merci Naziel pour le lien j'y vais de ce doigt smile

lubuntu@lubuntu-HP-Pavilion-dv7-Notebook-PC:~$ dmesg | grep -EiC2 "brcm|sdio|sdhci"
[    1.104195] acpi device:10: registered as cooling_device4
[    1.104260] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/LNXVIDEO:02/input/input6
[    1.110698] sdhci: Secure Digital Host Controller Interface driver
[    1.110699] sdhci: Copyright(c) Pierre Ossman
[    1.115156] sdhci-pci 0000:04:00.1: SDHCI controller found [197b:2382] (rev 0)
[    1.115377] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    1.118400] ahci 0000:00:1f.2: version 3.0
--
[    1.118762] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.118776] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.123772] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA
[    1.123812] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2381] (rev 0)
[    1.127406] bcma: bus0: Found chip with id 43225, rev 0x01 and package 0x0A
[    1.127440] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[    1.127467] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[    1.127517] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[    1.132042] sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface.
[    1.132235] firewire_ohci 0000:04:00.0: overriding IsoXmitIntMask
[    1.132569] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0x        (ptrval), c8:0a:a9:c1:af:71, XID 083000c0 IRQ 25
--
[    2.934486] snd_hda_codec_idt hdaudioC0D0:      Mic=0xb
[    2.944242] uvcvideo: Found UVC 1.00 device HP Webcam (064e:c107)
[    2.944389] brcmsmac bcma0:1: mfg 4bf core 812 rev 23 class 0 irq 16
[    2.945202] clocksource: Switched to clocksource tsc
[    2.961339] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
--
[    2.974824] uvcvideo 2-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[    2.978917] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    2.979302] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 497
[    2.982230] input: HP Webcam: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14
[    2.998217] usbcore: registered new interface driver uvcvideo
--
[    3.037409] kvm: disabled by bios
[    3.065545] kvm: disabled by bios
[    3.098104] brcmsmac bcma0:1 wlp2s0b1: renamed from wlan0
[    3.416726] Bluetooth: Core ver 2.22
[    3.416751] NET: Registered protocol family 31
--
[    3.820322] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    3.822437] r8169 0000:03:00.0 enp3s0: link down
[    3.854559] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[    3.854585] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[    3.855736] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    3.862664] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
--
[   28.495651] random: crng init done
[   28.495654] random: 7 urandom warning(s) missed due to ratelimiting
[   54.295069] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   54.295085] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   54.296222] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   56.864741] wlp2s0b1: Trigger new scan to find an IBSS to join
--
[   63.013105] wlp2s0b1: Trigger new scan to find an IBSS to join
[   63.719335] wlp2s0b1: Creating new IBSS network, BSSID c6:74:13:f2:d6:c9
[   63.719828] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   63.720008] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[   63.720016] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[   63.721473] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[   95.078045] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[   95.078064] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[   95.150185] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   95.150201] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   95.151317] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  183.022503] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  183.022519] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  183.023639] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  186.920064] wlp2s0b1: Trigger new scan to find an IBSS to join
[  189.992516] wlp2s0b1: Trigger new scan to find an IBSS to join
[  190.706368] wlp2s0b1: Creating new IBSS network, BSSID 76:f8:fd:f5:68:38
[  190.707137] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  190.707309] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[  190.707318] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[  190.708839] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[  223.097461] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[  223.097481] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[  223.147414] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  223.147428] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  223.148505] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  234.080103] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  234.080117] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  234.081245] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  237.906333] wlp2s0b1: Trigger new scan to find an IBSS to join
[  240.947102] wlp2s0b1: Trigger new scan to find an IBSS to join
[  241.657009] wlp2s0b1: Creating new IBSS network, BSSID 52:c3:e0:db:d1:17
[  241.657789] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  241.657918] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[  241.657927] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[  241.658955] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[  272.253675] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  272.253692] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[  272.963767] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[  273.094341] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[  273.094357] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[  273.157334] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  273.157349] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  273.158527] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  273.944044] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  273.944058] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  273.945290] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  277.873428] wlp2s0b1: Trigger new scan to find an IBSS to join
[  280.587754] wlp2s0b1: Trigger new scan to find an IBSS to join
[  281.290472] wlp2s0b1: Creating new IBSS network, BSSID 32:d2:1f:02:d2:b5
[  281.291255] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  281.291408] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[  281.291418] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[  281.293027] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[  312.087892] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[  312.087906] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[  312.152896] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  312.152913] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  312.154173] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  312.948799] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  312.948816] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  312.949899] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  312.956351] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[  312.956515] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[  312.956617] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[  312.957156] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  312.957471] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  312.957713] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  312.958316] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  364.257410] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[  392.921037] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[  424.541721] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[  424.583906] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  424.583922] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  424.585102] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  574.832077] perf: interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[  741.717831] perf: interrupt took too long (3145 > 3136), lowering kernel.perf_event_max_sample_rate to 63500
[  977.594592] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[  977.594608] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  977.595751] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  979.993211] wlp2s0b1: Trigger new scan to find an IBSS to join
[  983.899035] wlp2s0b1: Trigger new scan to find an IBSS to join
[  984.607129] wlp2s0b1: Creating new IBSS network, BSSID aa:66:81:f8:1b:15
[  984.607945] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  984.608084] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[  984.608093] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[  984.609516] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[  995.539592] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[  995.539608] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[  995.600295] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  995.600310] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  995.601407] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1023.330976] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1023.330993] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1023.332087] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1026.846299] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1029.914368] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1030.620205] wlp2s0b1: Creating new IBSS network, BSSID 92:45:68:18:1f:d7
[ 1030.620983] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1030.621148] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1030.621158] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[ 1030.622555] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[ 1062.805432] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1062.805449] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1063.070393] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1063.070413] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[ 1063.133560] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1063.133575] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1063.134703] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1131.060325] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1131.060340] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1131.061466] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1131.100314] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1153.015862] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1153.015877] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1153.016947] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1156.854949] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1159.569118] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1160.280710] wlp2s0b1: Creating new IBSS network, BSSID 7e:e2:f3:bc:21:bd
[ 1160.281496] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1160.281682] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1160.281691] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[ 1160.283373] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[ 1192.066736] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1192.066755] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[ 1192.129223] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1192.129240] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1192.130588] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1192.907497] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1192.907514] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1192.908621] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1196.854771] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1199.894684] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1200.458946] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1200.458962] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[ 1210.931211] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1210.931226] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1210.932298] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1210.976282] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1211.751437] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1211.751451] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1211.752556] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1213.974751] wlp2s0b1: Trigger new scan to find an IBSS to join
--
[ 1219.862712] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1220.580514] wlp2s0b1: Creating new IBSS network, BSSID 62:0d:cb:10:6e:5e
[ 1220.581307] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1220.581481] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1220.581488] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[ 1220.582523] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[ 1244.258757] perf: interrupt took too long (3932 > 3931), lowering kernel.perf_event_max_sample_rate to 50750
[ 1254.026012] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1254.026028] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1254.728067] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1286.278162] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1286.278179] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1286.980207] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1321.888786] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1321.888801] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1322.590383] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1352.736561] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1352.736577] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1353.441104] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1384.803766] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1384.803782] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1385.508173] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1416.210445] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1416.210468] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1416.915563] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1424.042805] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1424.042816] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[ 1433.903040] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1433.903055] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1433.904132] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1433.947229] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1434.730002] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1434.730018] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1434.731130] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1434.731910] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[ 1434.732051] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1434.732357] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1434.732584] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1434.732811] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1434.733035] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1434.733681] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[ 1459.664282] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
--
[ 1498.917461] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[ 1505.942647] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[ 1532.324153] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1552.942521] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1552.942536] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1552.943667] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1552.987881] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1631.057815] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1657.092995] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1657.093010] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1657.094420] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1659.923616] wlp2s0b1: Trigger new scan to find an IBSS to join
--
[ 1666.067740] wlp2s0b1: Trigger new scan to find an IBSS to join
[ 1666.781582] wlp2s0b1: Creating new IBSS network, BSSID f2:b2:46:2f:0b:02
[ 1666.782426] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1666.782594] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1666.782605] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: true (implement)
[ 1666.783712] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[ 1709.076736] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1709.076758] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1709.781913] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1768.470404] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1768.470422] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1769.175528] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1801.011043] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1801.011060] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1801.712488] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1831.960433] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1831.960453] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1832.665529] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1889.306370] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1889.306394] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1890.015517] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1945.102770] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1945.102786] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1945.806087] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 1977.542523] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1977.542539] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 1978.246819] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 2010.142958] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2010.142976] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 2010.848089] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 2049.114649] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2049.114666] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 2049.819521] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 2081.701156] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2081.701173] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 2082.404971] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 2128.916658] wlp2s0b1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2128.916678] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 2129.621580] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[ 2147.839014] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[ 2147.839029] brcmsmac bcma0:1: brcms_ops_bss_info_changed: IBSS joined: false (implement)
[ 2147.887336] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 2147.887350] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 2147.888468] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 3496.706537] perf: interrupt took too long (4929 > 4915), lowering kernel.perf_event_max_sample_rate to 40500
[ 5604.798861] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 5604.798876] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 5604.800072] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 5604.852786] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[29229.512681] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[29229.512695] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[29229.513775] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[29229.581362] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[31000.162684] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[31000.162698] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[31000.163816] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[31000.164645] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[31000.164732] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[31000.166185] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[31000.166803] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[31000.167035] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[31000.167281] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[31000.167524] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[31234.273115] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[31234.299263] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[31234.299280] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[31234.300450] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[32914.120244] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[32914.120257] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[32914.121278] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[32914.163098] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[32914.163111] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[32914.164338] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[33266.978400] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33266.978415] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[33266.979503] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[33266.980621] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[33266.980774] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[33266.981058] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[33266.981453] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33266.981692] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33266.981947] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33266.982193] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33313.567157] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[33313.569923] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 137/256 dur 1602/1504
[33313.582230] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 241/256 dur 2434/1504
[33337.261820] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[33382.461876] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[33478.255622] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[33478.255637] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[33478.256763] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[33478.307921] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[33479.091718] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33479.091734] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[33479.092804] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[33479.094127] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[33479.094283] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[33479.094752] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[33479.095114] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33479.095380] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33479.095650] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33479.095905] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33513.132603] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[33513.176571] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[33513.176586] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[33513.178182] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[33609.472836] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33609.472850] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[33609.473961] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[33609.475315] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[33609.475467] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[33609.475969] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[33609.476360] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33609.476617] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33609.476874] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[33609.477115] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34095.925356] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[34095.970449] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34095.970465] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[34095.971849] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[34131.786056] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34131.788742] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34131.790575] wlp2s0b1: authenticated
[34131.790895] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34131.793056] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34131.795747] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34131.796368] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34131.796375] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34131.796403] wlp2s0b1: associated
[34131.796725] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[34151.696767] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34151.696779] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34152.502325] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34152.502421] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34152.504086] wlp2s0b1: authenticated
[34152.504328] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34152.504845] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34152.507580] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34152.508185] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34152.508191] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34152.508203] wlp2s0b1: associated
[34162.898891] wlp2s0b1: deauthenticating from 00:24:d4:70:d9:db by local choice (Reason: 3=DEAUTH_LEAVING)
[34162.932183] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34162.932195] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34165.603530] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34165.603657] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34165.605410] wlp2s0b1: authenticated
[34165.605621] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34165.608725] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34165.611433] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34165.612059] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34165.612064] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34165.612072] wlp2s0b1: associated
[34211.383599] wlp2s0b1: deauthenticating from 00:24:d4:70:d9:db by local choice (Reason: 3=DEAUTH_LEAVING)
[34211.384643] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34211.384651] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34298.338537] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[34332.093937] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34332.094041] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34332.097030] wlp2s0b1: authenticated
[34332.097297] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34332.100998] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34332.103705] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34332.104393] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34332.104400] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34332.104412] wlp2s0b1: associated
[34332.104887] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[34335.736947] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34335.736960] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34336.542193] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34336.542344] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34336.544170] wlp2s0b1: authenticated
[34336.544461] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34336.544889] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34336.549909] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34336.550504] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34336.550513] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34336.550525] wlp2s0b1: associated
[34344.704770] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34344.704786] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34345.514374] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34345.514482] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
--
[34346.917965] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34346.919704] wlp2s0b1: authenticated
[34346.919968] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34346.920708] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34346.923384] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34346.924123] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34346.924131] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34346.924144] wlp2s0b1: associated
[34350.700667] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34350.700680] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34351.510176] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34351.510251] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34351.516853] wlp2s0b1: authenticated
[34351.517412] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34351.520485] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34351.537103] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34351.537692] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34351.537697] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34351.537707] wlp2s0b1: associated
[34353.708570] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34353.708581] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34354.513741] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34354.513833] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
--
[34361.653451] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34361.655316] wlp2s0b1: authenticated
[34361.655594] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34361.656292] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34361.659008] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34361.659607] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34361.659615] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34361.659627] wlp2s0b1: associated
[34377.375411] wlp2s0b1: deauthenticating from 00:24:d4:70:d9:db by local choice (Reason: 3=DEAUTH_LEAVING)
[34377.376471] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34377.376479] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34393.736682] wlp2s0b1: authenticate with 00:24:d4:70:d9:db
[34393.736782] wlp2s0b1: send auth to 00:24:d4:70:d9:db (try 1/3)
[34393.738476] wlp2s0b1: authenticated
[34393.738715] brcmsmac bcma0:1 wlp2s0b1: disabling HT/VHT due to WEP/TKIP use
[34393.739660] wlp2s0b1: associate with 00:24:d4:70:d9:db (try 1/3)
[34393.742751] wlp2s0b1: RX AssocResp from 00:24:d4:70:d9:db (capab=0x411 status=0 aid=2)
[34393.743405] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[34393.743415] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[34393.743556] wlp2s0b1: associated
[34439.373788] wlp2s0b1: deauthenticating from 00:24:d4:70:d9:db by local choice (Reason: 3=DEAUTH_LEAVING)
[34439.374911] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[34439.374922] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34510.549748] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[34961.140411] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
--
[34963.640384] r8169 0000:03:00.0 enp3s0: link up
[34963.640401] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[34976.446105] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[34976.446120] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[34976.447255] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[35011.147359] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[35011.147373] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[35011.148659] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[35177.336309] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
--
[35177.730258] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[35177.764363] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[35178.546096] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[35178.546110] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[35178.547288] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[35178.548694] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[35178.550746] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[35178.550933] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[35178.551598] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[35178.551830] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[35178.552079] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[35178.552325] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[35180.401720] r8169 0000:03:00.0 enp3s0: link up
[35180.401738] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[39851.119317] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[39851.160287] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[39851.160303] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[39851.161432] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[39955.835059] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
--
[39960.934085] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[39960.935857] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[39960.949289] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[39960.949302] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[39960.950377] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[39960.998884] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[39961.778662] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[39961.778678] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[39961.779712] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[39961.780560] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[39961.780700] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[39961.780841] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[39961.781187] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[39961.781433] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[39961.781672] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[39961.781916] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[39963.399213] r8169 0000:03:00.0 enp3s0: link up
[39963.399229] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
--
[41746.640224] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[41757.714373] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[41759.622002] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[41759.666230] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[41759.666246] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[41759.667357] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[41773.847179] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[41773.847193] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[41773.848345] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[41773.849121] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[41773.849277] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: true
[41773.849594] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready
[41773.849992] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[41773.850237] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[41773.850483] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[41773.850716] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[41792.899888] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[41792.902683] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 137/256 dur 1602/1504
[41792.908371] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 241/256 dur 2434/1504
[41855.458500] netlink: 'wpa_supplicant': attribute type 213 has an invalid length.
[42261.407932] brcmsmac bcma0:1: brcms_ops_bss_info_changed: Beacon enabled: false
[44803.734952] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[44803.734953] CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
lubuntu@lubuntu-HP-Pavilion-dv7-Notebook-PC:~$ 

#30 Le 23/11/2018, à 22:40

Nuliel

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

[44803.734952] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[44803.734953] CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)

Il faudrait peut être s'intéresser à la température du pc

Hors ligne

#31 Le 23/11/2018, à 22:46

Toulibre

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Aie oui j'ai désactivé le ventilateur du bios ce matin mais je vais penser à le remettre , de temps en temps en travaillant la photo ça pousse le processeur limite limite smile

#32 Le 23/11/2018, à 22:47

Nuliel

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Bah justement, si tu coupes le ventilo, c'est pire! (tu vas finir sans pc en faisant ce genre de choses)

Dernière modification par Nuliel (Le 23/11/2018, à 22:48)

Hors ligne

#33 Le 23/11/2018, à 22:52

Toulibre

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

C'était pour le bruit un peu génant le matin , ma femme complaint , du coup là je viens de mettre le ventilateur plateau en route ! smile

#34 Le 23/11/2018, à 22:54

xubu1957

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

[    1.123772] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA
[    1.123812] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2381] (rev 0)
[    1.127406] bcma: bus0: Found chip with id 43225, rev 0x01 and package 0x0A

mmc0: SDHCI controller on PCI

@Naziel

Tu connais ?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#35 Le 23/11/2018, à 22:55

Toulibre

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Ceci dit je viens d'upgrader le processeur en passant du 430M au 640M , ça chauffe un poil plus pour à peine 15% d'amélioration

#36 Le 23/11/2018, à 22:57

Toulibre

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Ce serait mon lecteur de carte SD intégré peut-être ?

#37 Le 23/11/2018, à 23:00

Nuliel

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

http://www.varsanofiev.com/inside/WritingLinuxSDIODrivers.htm a écrit :

mmc/host contains the host adapter drivers. sdhci is of particular interest, as it implements the SDIO host interface for the “Secure Digital Host Controller Interface”-compliant chips, including the near-omnipresent Ricoh controllers.

Maintenant oui smile

Hors ligne

#38 Le 23/11/2018, à 23:12

xubu1957

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

@Naziel

Le 21/11/2018, Arnaud04 a écrit :

Merci beaucoup

wget https://github.com/khadas/android_hardware_amlogic_wifi/raw/b6709758755568e4a0ff6e80993be0fc64c77fb9/bcm_ampak/config/6255/nvram.txt
sudo cp nvram.txt /lib/firmware/brcm/brcmfmac43455-sdio.txt

un redémarrage, et ça fonctionne, le wifi fonctionne !

smile

mais :

 uname -mr
4.18.0-10-generic x86_64

rajout lien > [Résolu] carte wifi BCM43455-sdio - Pas de wifi sur un mini PC

Dernière modification par xubu1957 (Le 23/11/2018, à 23:19)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#39 Le 23/11/2018, à 23:15

Toulibre

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Eh beh , ça c'est un ordi ! smile
Je viens d'essayer la méthode Naziel sur le lien que tu as envoyé , alors j'ai une question , le mode infrastructure c'est bien le mode adhoc ?
Cela ne fonctionne toujours pas , par contre impossible de modifier le fichier , j'ai dû l'ouvrir par l'interface en double clic sur le fichier et demandé à l'ouvrir avec le terminal en envoyant la commande sudo nano , mais pas en directement avec le terminal sudo nano chemin du fichier (?)
Bref , ça deconnecte toute les 10 secondes encore ..

#40 Le 23/11/2018, à 23:16

Nuliel

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

@xubu: J'ai pas compris ce que tu veux me dire

@toulibre: c'est pas impossible que la carte wifi soit pas encore assez bien supportée pour ça. Normal que tu aies utilisé sudo nano. Je sais pas trop quoi proposer d'autre

Dernière modification par Nuliel (Le 23/11/2018, à 23:18)

Hors ligne

#41 Le 23/11/2018, à 23:21

xubu1957

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

@Naziel

La carte wifi BCM43255 n'était pas prise en charge sur Ubuntu, sauf avec des noyaux 4.19, et de fait avec un noyau 4.18.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#42 Le 23/11/2018, à 23:24

Nuliel

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Ah ok. Sur le noyau 4.18 c'est du bidouillage, ça peut expliquer que ça marche pas

Hors ligne

#43 Le 23/11/2018, à 23:27

xubu1957

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Arnaud04 est sur 18.10 Cosmic.

Les derniers noyaux 4.18 intègrent-ils cette carte BCM43255 ?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#44 Le 23/11/2018, à 23:40

Nuliel

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

J'ai cherché mais je trouve rien du tout sad

Hors ligne

#45 Le 23/11/2018, à 23:56

xubu1957

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Dans > configurer mini pc Z83V

Le 04/06/2018, Alain128 a écrit :

Bonjour,
je déterre ce topic pour partager le fait qu'en passant au noyau 4.19 wifi ok, bluetooth ok, pas de son HDMI mais le son analogique fonctionne.

_ _ _

Dans > Linux version system for the Z83-W and Z83-F (Bionic-18.04)

Firstlt, let's have a look at the basic statistics:
v4.9 including the eMMC v5.0 driver required for accessing the internal storage;
v4.11 including the HDMI audio driver;
v4.12 recognizing the BCM43455 wifi driver but suffered a regression with the release of v4.13;
v4.13.2 / v4.14 including a fix for BCM43455 wifi driver;
v4.14 including a fix for the headphone audio driver;
v4.15-rc1 now includes a fix for the bluetooth driver;

I have updated the Bionic to V4.16-rc3, which makes the Wifi, Bluetooth, and audio work properly (no HDMI audio).


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Réso|u] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#46 Le 24/11/2018, à 01:17

Toulibre

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Dois-je en conclure que j'obtiens une connexion wifi opérationnelle parce que j'ai "bidouillé" mais que dans mon cas je ne peux obtenir un hotspot fonctionnel ?

#47 Le 24/11/2018, à 02:19

Toulibre

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Bon ben je vais abandonner l'idée de pouvoir créer un hotspot sur LUBUNTU , je peux voir beaucoup d'exemples donnés avec UBUNTU mais ni l'interface et ni l'environnement ...
Merci quand même de votre soutient smile

#48 Le 24/11/2018, à 10:33

Nuliel

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

A mon avis le pilote n'est pas encore assez avancé dans son développement pour l'utiliser en mode ap.

Hors ligne

#49 Le 24/11/2018, à 11:43

Toulibre

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Et bien messieurs les développeurs un appel est lancé pour Lubuntu et son futur one-click hotspot !!!
Je viens d'installer Ubuntu , one-click est zou , za fonctionne !

#50 Le 24/11/2018, à 11:45

Nuliel

Re : [Résolu] Comment créer un hotspot avec LUBUNTU 18.04 LTS ?

Ah, étonnant!
Content que ça fonctionne

Hors ligne