#26 Le 24/10/2018, à 19:31
- Mornagest
Re : Ubuntu 18 LTS démarre après 10 secondes...
Il reste donc encore quiet splash comme paramètres dans ce fichier. Il faut que tu l'édites pour les enlever, que tu le sauvegardes, et ensuite, que tu fasses sudo update-grub pour prendre en compte la modification.
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#27 Le 25/10/2018, à 08:21
- maximeay
Re : Ubuntu 18 LTS démarre après 10 secondes...
Oui, je l'ai remis car ça faisait exactement le même temps mais sans le logo et avec des message de console sur l'écran, je préfère laisser le logo si ça change pas le temps..
Hors ligne
#28 Le 25/10/2018, à 12:37
- grigouille
Re : Ubuntu 18 LTS démarre après 10 secondes...
Fait
dmesg | lesset regarde là où tu perds du temps. Poste les lignes autour de cette perte de temps.
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#29 Le 25/10/2018, à 19:48
- maximeay
Re : Ubuntu 18 LTS démarre après 10 secondes...
Comment je regarde ou je perds du temps ? Voici les lignes que j'obtiens avec la commande
[ 0.000000] microcode: microcode updated early to revision 0x8e, date = 2018-03-24
[ 0.000000] Linux version 4.15.0-38-generic (buildd@lcy01-amd64-023) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #41-Ubuntu SMP Wed Oct 10 10:59:38 UTC 2018 (Ubuntu 4.15.0-38.41-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-38-generic root=UUID=f8543c1d-96bd-40b4-89cc-beaf23be6037 ro quiet splash noresume vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000074ca3fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000074ca4000-0x0000000074ca4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000074ca5000-0x0000000074ca5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000074ca6000-0x000000007a305fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a306000-0x000000007a67dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a67e000-0x000000007a6bcfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007a6bd000-0x000000007aff9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007affa000-0x000000007b58dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b58e000-0x000000007b5fdfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007b5fe000-0x000000007b5fefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x7a68a000 ACPI 2.0=0x7a68a000 SMBIOS=0xf05e0 ESRT=0x7b361598 MPS=0xfcbb0
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. Inspiron 5567/05VRRG, BIOS 1.1.7 09/11/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x47f800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007E000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 007D000000 mask 7FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x7b5ff max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcdf0-0x000fcdff] mapped at [ (ptrval)]
[ 0.000000] esrt: Reserving ESRT space from 0x000000007b361598 to 0x000000007b3615d0.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x1d7f3f000, 0x1d7f3ffff] PGTABLE
[ 0.000000] BRK [0x1d7f40000, 0x1d7f40fff] PGTABLE
[ 0.000000] BRK [0x1d7f41000, 0x1d7f41fff] PGTABLE
[ 0.000000] BRK [0x1d7f42000, 0x1d7f42fff] PGTABLE
[ 0.000000] BRK [0x1d7f43000, 0x1d7f43fff] PGTABLE
[ 0.000000] BRK [0x1d7f44000, 0x1d7f44fff] PGTABLE
[ 0.000000] BRK [0x1d7f45000, 0x1d7f45fff] PGTABLE
[ 0.000000] BRK [0x1d7f46000, 0x1d7f46fff] PGTABLE
[ 0.000000] BRK [0x1d7f47000, 0x1d7f47fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3160f000-0x34afefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007A68A000 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x000000007A68A0C0 000104 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007A6ADA98 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007A68A258 023839 (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.000000] ACPI: FACS 0x000000007AFF2F80 000040
[ 0.000000] ACPI: APIC 0x000000007A6ADBA8 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007A6ADC30 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000007A6ADC78 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007A6ADD18 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007A6ADD58 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x000000007A6ADD90 000322 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: BOOT 0x000000007A6AE0B8 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007A6AE0E0 0012DC (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: HPET 0x000000007A6AF3C0 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007A6AF3F8 0006B5 (v02 INTEL xh_OEMBD 00000000 INTL 20160422)
[ 0.000000] ACPI: UEFI 0x000000007A6AFAB0 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x000000007A6AFAF8 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: LPIT 0x000000007A6B09D8 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: WSMT 0x000000007A6B0A70 000028 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007A6B0A98 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000007A6B0D38 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.000000] ACPI: DBGP 0x000000007A6B3D40 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000007A6B3D78 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: MSDM 0x000000007A6B3DD0 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007A6B3E28 005700 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: SLIC 0x000000007A6B9528 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.000000] ACPI: SSDT 0x000000007A6B96A0 000281 (v02 SgRef SgUlt 00001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000007A6B9928 000699 (v02 SgRef SgPch 00001000 INTL 20160422)
[ 0.000000] ACPI: DMAR 0x000000007A6B9FC8 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.000000] ACPI: TPM2 0x000000007A6BA0B8 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.000000] ACPI: SSDT 0x000000007A6BA0F0 0011AA (v01 AmdRef AmdTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: BGRT 0x000000007A6BB2A0 000038 (v00 \xf3\xee 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000047f7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x47f7d5000-0x47f7fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000047f7fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000074ca3fff]
[ 0.000000] node 0: [mem 0x0000000074ca6000-0x000000007a305fff]
[ 0.000000] node 0: [mem 0x000000007b5fe000-0x000000007b5fefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000047f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047f7fffff]
[ 0.000000] On node 0 totalpages: 4168354
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7757 pages used for memmap
[ 0.000000] DMA32 zone: 496389 pages, LIFO batch:31
[ 0.000000] Normal zone: 57312 pages used for memmap
[ 0.000000] Normal zone: 3667968 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 99 pages
[ 0.000000] Reserving Intel graphics memory at 0x000000007d800000-0x000000007f7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x74ca4000-0x74ca4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x74ca5000-0x74ca5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a306000-0x7a67dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a67e000-0x7a6bcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a6bd000-0x7aff9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7affa000-0x7b58dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b58e000-0x7b5fdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b5ff000-0x7d7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7d800000-0x7f7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x7f800000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4103195
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-38-generic root=UUID=f8543c1d-96bd-40b4-89cc-beaf23be6037 ro quiet splash noresume vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16148340K/16673416K available (12300K kernel code, 2472K rwdata, 4248K rodata, 2408K init, 2416K bss, 525076K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39175 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] DMAR: Host address width 39
[ 0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.004000] DMAR: RMRR base: 0x0000007a3cf000 end: 0x0000007a3eefff
[ 0.004000] DMAR: RMRR base: 0x0000007d000000 end: 0x0000007f7fffff
[ 0.004000] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.004000] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.004000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.004000] x2apic enabled
[ 0.004000] Switched APIC routing to cluster x2apic.
[ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028000] tsc: Detected 2900.000 MHz processor
[ 0.028000] tsc: Detected 2904.000 MHz TSC
[ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5808.00 BogoMIPS (lpj=11616000)
[ 0.028000] pid_max: default: 32768 minimum: 301
[ 0.028000] Security Framework initialized
[ 0.028000] Yama: becoming mindful.
[ 0.028000] AppArmor: AppArmor initialized
[ 0.032621] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.034522] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.034604] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.034660] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.034850] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.034850] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.034856] mce: CPU supports 8 MCE banks
[ 0.034871] CPU0: Thermal monitoring enabled (TM1)
[ 0.034885] process: using mwait in idle threads
[ 0.034888] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.034888] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.034890] Spectre V2 : Mitigation: Full generic retpoline
[ 0.034890] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.034891] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.034891] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.034892] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.041393] Freeing SMP alternatives memory: 36K
[ 0.046655] TSC deadline timer enabled
[ 0.046674] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.046713] mce: [Hardware Error]: Machine check events logged
[ 0.046714] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 6: ee2000000040110a
[ 0.046717] mce: [Hardware Error]: TSC 0 ADDR fef1ce80 MISC 43880014086
[ 0.046721] mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1540492893 SOCKET 0 APIC 0 microcode 8e
[ 0.046722] mce: [Hardware Error]: Machine check events logged
[ 0.046723] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 7: ee2000000040110a
[ 0.046724] mce: [Hardware Error]: TSC 0 ADDR fef1ce40 MISC 7880014086
[ 0.046727] mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1540492893 SOCKET 0 APIC 0 microcode 8e
[ 0.046755] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.046785] ... version: 4
[ 0.046786] ... bit width: 48
[ 0.046786] ... generic registers: 4
[ 0.046787] ... value mask: 0000ffffffffffff
[ 0.046787] ... max period: 00007fffffffffff
[ 0.046788] ... fixed-purpose events: 3
[ 0.046788] ... event mask: 000000070000000f
[ 0.046826] Hierarchical SRCU implementation.
[ 0.047755] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.047766] smp: Bringing up secondary CPUs ...
[ 0.047827] x86: Booting SMP configuration:
[ 0.047828] .... node #0, CPUs: #1 #2 #3
[ 0.048519] smp: Brought up 1 node, 4 CPUs
[ 0.048519] smpboot: Max logical packages: 1
[ 0.048519] smpboot: Total of 4 processors activated (23232.00 BogoMIPS)
[ 0.052403] devtmpfs: initialized
[ 0.052403] x86/mm: Memory block size: 128MB
[ 0.053106] evm: security.selinux
[ 0.053107] evm: security.SMACK64
[ 0.053107] evm: security.SMACK64EXEC
[ 0.053107] evm: security.SMACK64TRANSMUTE
[ 0.053108] evm: security.SMACK64MMAP
[ 0.053108] evm: security.apparmor
[ 0.053109] evm: security.ima
[ 0.053109] evm: security.capability
[ 0.053121] PM: Registering ACPI NVS region [mem 0x74ca4000-0x74ca4fff] (4096 bytes)
[ 0.053121] PM: Registering ACPI NVS region [mem 0x7a6bd000-0x7aff9fff] (9687040 bytes)
[ 0.053121] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.053121] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.053121] pinctrl core: initialized pinctrl subsystem
[ 0.053121] RTC time: 18:41:33, date: 10/25/18
[ 0.053121] NET: Registered protocol family 16
[ 0.053121] audit: initializing netlink subsys (disabled)
[ 0.053121] audit: type=2000 audit(1540492893.052:1): state=initialized audit_enabled=0 res=1
[ 0.053121] cpuidle: using governor ladder
[ 0.053121] cpuidle: using governor menu
[ 0.053121] Simple Boot Flag at 0x47 set to 0x80
[ 0.053121] ACPI: bus type PCI registered
[ 0.053121] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.053121] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.053121] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.053121] PCI: Using configuration type 1 for base access
[ 0.053121] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.053121] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.053121] ACPI: Added _OSI(Module Device)
[ 0.053121] ACPI: Added _OSI(Processor Device)
[ 0.053121] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.053121] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.053121] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.053121] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.057387] ACPI: Executed 33 blocks of module-level executable AML code
[ 0.073514] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.081822] ACPI: Dynamic OEM Table Load:
[ 0.081830] ACPI: SSDT 0xFFFF9854ECB73800 0006F6 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.082106] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.082187] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.083362] ACPI: Dynamic OEM Table Load:
[ 0.083367] ACPI: SSDT 0xFFFF9854EC642400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.083621] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.084179] ACPI: Dynamic OEM Table Load:
[ 0.084184] ACPI: SSDT 0xFFFF9854ECB75000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.084776] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.085018] ACPI: Dynamic OEM Table Load:
[ 0.085023] ACPI: SSDT 0xFFFF9854EC568600 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.085278] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.087026] ACPI: EC: EC started
[ 0.087027] ACPI: EC: interrupt blocked
[ 0.089612] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.089614] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x45, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.089615] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[ 0.089616] ACPI: Interpreter enabled
[ 0.089659] ACPI: (supports S0 S3 S4 S5)
[ 0.089660] ACPI: Using IOAPIC for interrupt routing
[ 0.089702] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.090415] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.094902] ACPI: Power Resource [WRST] (on)
[ 0.095325] ACPI: Power Resource [WRST] (on)
[ 0.095752] ACPI: Power Resource [WRST] (on)
[ 0.096186] ACPI: Power Resource [WRST] (on)
[ 0.096612] ACPI: Power Resource [WRST] (on)
[ 0.096671] ACPI: Power Resource [PC09] (on)
[ 0.098084] ACPI: Power Resource [WRST] (on)
[ 0.098510] ACPI: Power Resource [WRST] (on)
[ 0.098938] ACPI: Power Resource [WRST] (on)
[ 0.099515] ACPI: Power Resource [WRST] (on)
[ 0.099962] ACPI: Power Resource [WRST] (on)
[ 0.100402] ACPI: Power Resource [WRST] (on)
[ 0.100824] ACPI: Power Resource [WRST] (on)
[ 0.101245] ACPI: Power Resource [WRST] (on)
[ 0.101668] ACPI: Power Resource [WRST] (on)
[ 0.102092] ACPI: Power Resource [WRST] (on)
[ 0.102512] ACPI: Power Resource [WRST] (on)
[ 0.104106] ACPI: Power Resource [WRST] (on)
[ 0.104536] ACPI: Power Resource [WRST] (on)
[ 0.104961] ACPI: Power Resource [WRST] (on)
[ 0.123545] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.123551] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.125573] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.126548] PCI host bridge to bus 0000:00
[ 0.126551] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.126552] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.126553] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.126554] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xdfffffff window]
[ 0.126556] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.126557] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.126567] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[ 0.126716] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[ 0.126729] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd1ffffff 64bit]
[ 0.126735] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.126739] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.126755] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.126905] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.126918] pci 0000:00:04.0: reg 0x10: [mem 0xd2320000-0xd2327fff 64bit]
[ 0.127153] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.127177] pci 0000:00:14.0: reg 0x10: [mem 0xd2310000-0xd231ffff 64bit]
[ 0.127253] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.127495] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.127519] pci 0000:00:14.2: reg 0x10: [mem 0xd2338000-0xd2338fff 64bit]
[ 0.127795] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.128055] pci 0000:00:15.0: reg 0x10: [mem 0xd2337000-0xd2337fff 64bit]
[ 0.129052] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.129315] pci 0000:00:15.1: reg 0x10: [mem 0xd2336000-0xd2336fff 64bit]
[ 0.130246] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.130274] pci 0000:00:16.0: reg 0x10: [mem 0xd2335000-0xd2335fff 64bit]
[ 0.130356] pci 0000:00:16.0: PME# supported from D3hot
[ 0.130525] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.130545] pci 0000:00:17.0: reg 0x10: [mem 0xd2330000-0xd2331fff]
[ 0.130553] pci 0000:00:17.0: reg 0x14: [mem 0xd2334000-0xd23340ff]
[ 0.130561] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.130569] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.130577] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.130585] pci 0000:00:17.0: reg 0x24: [mem 0xd2333000-0xd23337ff]
[ 0.130634] pci 0000:00:17.0: PME# supported from D3hot
[ 0.130803] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.130884] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.131091] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.131172] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.131365] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.131446] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.131657] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[ 0.131925] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.131940] pci 0000:00:1f.2: reg 0x10: [mem 0xd232c000-0xd232ffff]
[ 0.132143] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[ 0.132171] pci 0000:00:1f.3: reg 0x10: [mem 0xd2328000-0xd232bfff 64bit]
[ 0.132198] pci 0000:00:1f.3: reg 0x20: [mem 0xd2300000-0xd230ffff 64bit]
[ 0.132253] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.132484] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.132545] pci 0000:00:1f.4: reg 0x10: [mem 0xd2332000-0xd23320ff 64bit]
[ 0.132616] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.132925] pci 0000:01:00.0: [1002:6900] type 00 class 0x038000
[ 0.132977] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.132999] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.133013] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.133027] pci 0000:01:00.0: reg 0x24: [mem 0xd0200000-0xd023ffff]
[ 0.133041] pci 0000:01:00.0: reg 0x30: [mem 0xd0240000-0xd025ffff pref]
[ 0.133053] pci 0000:01:00.0: enabling Extended Tags
[ 0.133168] pci 0000:01:00.0: supports D1 D2
[ 0.144070] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.144073] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.144076] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xd02fffff]
[ 0.144314] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000
[ 0.144376] pci 0000:02:00.0: reg 0x10: [mem 0xd2000000-0xd21fffff 64bit]
[ 0.144698] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.156221] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.156225] pci 0000:00:1c.4: bridge window [mem 0xd2000000-0xd21fffff]
[ 0.156315] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[ 0.156354] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.156386] pci 0000:03:00.0: reg 0x18: [mem 0xd2204000-0xd2204fff 64bit]
[ 0.156408] pci 0000:03:00.0: reg 0x20: [mem 0xd2200000-0xd2203fff 64bit pref]
[ 0.156528] pci 0000:03:00.0: supports D1 D2
[ 0.156529] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168058] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.168061] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.168064] pci 0000:00:1c.5: bridge window [mem 0xd2200000-0xd22fffff]
[ 0.170838] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.170920] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.171001] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.171081] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.171161] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.171241] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.171322] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.171402] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.173476] ACPI: EC: interrupt unblocked
[ 0.173495] ACPI: EC: event unblocked
[ 0.173522] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x45, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.173523] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[ 0.173885] SCSI subsystem initialized
[ 0.174222] libata version 3.00 loaded.
[ 0.174234] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.174234] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.174234] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.174234] vgaarb: loaded
[ 0.174234] ACPI: bus type USB registered
[ 0.174234] usbcore: registered new interface driver usbfs
[ 0.174234] usbcore: registered new interface driver hub
[ 0.174234] usbcore: registered new device driver usb
[ 0.174234] EDAC MC: Ver: 3.0.0
[ 0.174234] Registered efivars operations
[ 0.180022] PCI: Using ACPI for IRQ routing
[ 0.212249] PCI: pci_cache_line_size set to 64 bytes
[ 0.212650] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.212651] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.212652] e820: reserve RAM buffer [mem 0x74ca4000-0x77ffffff]
[ 0.212653] e820: reserve RAM buffer [mem 0x7a306000-0x7bffffff]
[ 0.212654] e820: reserve RAM buffer [mem 0x7b5ff000-0x7bffffff]
[ 0.212655] e820: reserve RAM buffer [mem 0x47f800000-0x47fffffff]
[ 0.212734] NetLabel: Initializing
[ 0.212735] NetLabel: domain hash size = 128
[ 0.212735] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.212747] NetLabel: unlabeled traffic allowed by default
[ 0.212757] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.212757] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.214435] clocksource: Switched to clocksource hpet
[ 0.221355] VFS: Disk quotas dquot_6.6.0
[ 0.221368] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.221455] AppArmor: AppArmor Filesystem Enabled
[ 0.221474] pnp: PnP ACPI init
[ 0.221782] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.221783] system 00:00: [io 0xffff] has been reserved
[ 0.221785] system 00:00: [io 0xffff] has been reserved
[ 0.221786] system 00:00: [io 0xffff] has been reserved
[ 0.221787] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.221789] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.221793] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.221900] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.221938] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.221941] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.222286] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.222302] pnp 00:04: Plug and Play ACPI device, IDs DLL0767 PNP0f13 (active)
[ 0.222583] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.222585] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.222586] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.222588] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.222589] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.222591] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.222592] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.222594] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.222595] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.222597] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.222600] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.222643] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.222645] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.222646] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.222648] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.222649] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.222650] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.222652] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.222655] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.222985] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.222988] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.224329] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.224330] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.224333] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.227974] pnp: PnP ACPI: found 9 devices
[ 0.235820] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.235849] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.235855] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.235859] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xd02fffff]
[ 0.235865] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.235868] pci 0000:00:1c.4: bridge window [mem 0xd2000000-0xd21fffff]
[ 0.235874] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.235876] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.235880] pci 0000:00:1c.5: bridge window [mem 0xd2200000-0xd22fffff]
[ 0.235887] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.235888] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.235889] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.235890] pci_bus 0000:00: resource 7 [mem 0x7f800000-0xdfffffff window]
[ 0.235892] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.235893] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.235894] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd02fffff]
[ 0.235896] pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd21fffff]
[ 0.235897] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.235898] pci_bus 0000:03: resource 1 [mem 0xd2200000-0xd22fffff]
[ 0.236091] NET: Registered protocol family 2
[ 0.236283] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.236522] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.236726] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.236759] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.236817] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.236894] NET: Registered protocol family 1
[ 0.236915] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.238305] PCI: CLS 0 bytes, default 64
[ 0.238334] Unpacking initramfs...
[ 0.966515] Freeing initrd memory: 54208K
[ 0.966589] DMAR: ACPI device "device:70" under DMAR at fed91000 as 00:15.0
[ 0.966592] DMAR: ACPI device "device:71" under DMAR at fed91000 as 00:15.1
[ 0.966608] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.966610] software IO TLB [mem 0x6f28c000-0x7328c000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.966798] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc05e54fc, max_idle_ns: 440795291716 ns
[ 0.966935] Scanning for low memory corruption every 60 seconds
[ 0.967572] Initialise system trusted keyrings
[ 0.967580] Key type blacklist registered
[ 0.967632] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.968597] zbud: loaded
[ 0.969036] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.969205] fuse init (API version 7.26)
[ 0.971675] Key type asymmetric registered
[ 0.971676] Asymmetric key parser 'x509' registered
[ 0.971699] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.971758] io scheduler noop registered
[ 0.971759] io scheduler deadline registered
[ 0.971793] io scheduler cfq registered (default)
[ 0.972701] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[ 0.972723] pcieport 0000:00:1c.4: AER enabled with IRQ 123
[ 0.972743] pcieport 0000:00:1c.5: AER enabled with IRQ 124
[ 0.972758] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[ 0.972775] pcieport 0000:00:1c.4: Signaling PME with IRQ 123
[ 0.972784] pcieport 0000:00:1c.5: Signaling PME with IRQ 124
[ 0.972865] efifb: probing for efifb
[ 0.972876] efifb: framebuffer at 0xb0000000, using 8128k, total 8128k
[ 0.972877] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.972878] efifb: scrolling: redraw
[ 0.972879] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.972975] Console: switching to colour frame buffer device 240x67
[ 0.972997] fb0: EFI VGA frame buffer device
[ 0.973005] intel_idle: MWAIT substates: 0x11142120
[ 0.973005] intel_idle: v0.4.1 model 0x8E
[ 0.973224] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.974430] ACPI: AC Adapter [AC] (off-line)
[ 0.974487] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.974548] ACPI: Lid Switch [LID0]
[ 0.974574] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.974624] ACPI: Power Button [PBTN]
[ 0.974648] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.974662] ACPI: Sleep Button [SBTN]
[ 0.974686] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.974740] ACPI: Power Button [PWRF]
[ 0.976380] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.976951] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.976952] ACPI: Thermal Zone [THM] (25 C)
[ 0.977112] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.980161] Linux agpgart interface v0.103
[ 0.995810] ACPI: Battery Slot [BAT0] (battery present)
[ 0.996322] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 0.996331] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 1.026344] loop: module loaded
[ 1.026473] libphy: Fixed MDIO Bus: probed
[ 1.026474] tun: Universal TUN/TAP device driver, 1.6
[ 1.026540] PPP generic driver version 2.4.2
[ 1.026609] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.026611] ehci-pci: EHCI PCI platform driver
[ 1.026618] ehci-platform: EHCI generic platform driver
[ 1.026625] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.026630] ohci-pci: OHCI PCI platform driver
[ 1.026636] ohci-platform: OHCI generic platform driver
[ 1.026641] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.026818] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.026823] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.027928] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 1.027933] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.028126] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.028128] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.028129] usb usb1: Product: xHCI Host Controller
[ 1.028130] usb usb1: Manufacturer: Linux 4.15.0-38-generic xhci-hcd
[ 1.028131] usb usb1: SerialNumber: 0000:00:14.0
[ 1.028259] hub 1-0:1.0: USB hub found
[ 1.028279] hub 1-0:1.0: 12 ports detected
[ 1.029468] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.029471] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.029473] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.029508] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.029509] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.029510] usb usb2: Product: xHCI Host Controller
[ 1.029511] usb usb2: Manufacturer: Linux 4.15.0-38-generic xhci-hcd
[ 1.029512] usb usb2: SerialNumber: 0000:00:14.0
[ 1.029628] hub 2-0:1.0: USB hub found
[ 1.029642] hub 2-0:1.0: 6 ports detected
[ 1.030493] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.032104] i8042: Warning: Keylock active
[ 1.033685] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.033688] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.033854] mousedev: PS/2 mouse device common for all mice
[ 1.034200] rtc_cmos 00:01: RTC can wake from S4
[ 1.034733] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.034862] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.034868] i2c /dev entries driver
[ 1.034871] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[ 1.034923] device-mapper: uevent: version 1.0.3
[ 1.035070] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.035072] intel_pstate: Intel P-state driver initializing
[ 1.035564] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.035767] intel_pstate: HWP enabled
[ 1.035986] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.035987] EFI Variables Facility v0.08 2004-May-17
[ 1.046039] intel_pmc_core: initialized
[ 1.046191] NET: Registered protocol family 10
[ 1.049352] Segment Routing with IPv6
[ 1.049366] NET: Registered protocol family 17
[ 1.049432] Key type dns_resolver registered
[ 1.049716] RAS: Correctable Errors collector initialized.
[ 1.049737] microcode: sig=0x806e9, pf=0x80, revision=0x8e
[ 1.049885] microcode: Microcode Update Driver: v2.2.
[ 1.049891] sched_clock: Marking stable (1049883451, 0)->(1031044351, 18839100)
[ 1.050236] registered taskstats version 1
[ 1.050241] Loading compiled-in X.509 certificates
[ 1.051839] Loaded X.509 cert 'Build time autogenerated kernel key: f3a9ae7fdf18cf897e7c53db8499a9c1252f0be9'
[ 1.052092] Loaded UEFI:db cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7' linked to secondary sys keyring
[ 1.052109] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[ 1.052122] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[ 1.052201] Couldn't get size: 0x800000000000000e
[ 1.052202] MODSIGN: Couldn't get UEFI MokListRT
[ 1.052518] zswap: loaded using pool lzo/zbud
[ 1.055092] Key type big_key registered
[ 1.055094] Key type trusted registered
[ 1.056305] Key type encrypted registered
[ 1.056307] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.063231] ima: Allocated hash algorithm: sha1
[ 1.126466] evm: HMAC attrs: 0x1
[ 1.127756] Magic number: 6:945:696
[ 1.127994] rtc_cmos 00:01: setting system clock to 2018-10-25 18:41:34 UTC (1540492894)
[ 1.128082] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.128083] EDD information not available.
[ 1.364076] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 1.447170] Freeing unused kernel memory: 2408K
[ 1.452031] Write protecting the kernel read-only data: 20480k
[ 1.453052] Freeing unused kernel memory: 2008K
[ 1.455567] Freeing unused kernel memory: 1896K
[ 1.459732] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.459732] x86/mm: Checking user space page tables
[ 1.463800] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.514158] usb 1-1: New USB device found, idVendor=046d, idProduct=c52f
[ 1.514160] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.514162] usb 1-1: Product: USB Receiver
[ 1.514163] usb 1-1: Manufacturer: Logitech
[ 1.536851] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.539551] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 1.540746] usbcore: registered new interface driver usbhid
[ 1.540746] usbhid: USB HID core driver
[ 1.544374] ahci 0000:00:17.0: version 3.0
[ 1.544765] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.544873] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[ 1.544926] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.544928] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 1.545250] r8169 0000:03:00.0 eth0: RTL8106e at 0x (ptrval), 50:9a:4c:c3:7e:14, XID 04900000 IRQ 127
[ 1.545635] scsi host0: ahci
[ 1.545804] scsi host1: ahci
[ 1.545844] ata1: SATA max UDMA/133 abar m2048@0xd2333000 port 0xd2333100 irq 126
[ 1.545846] ata2: SATA max UDMA/133 abar m2048@0xd2333000 port 0xd2333180 irq 126
[ 1.585980] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.603941] [drm] Memory usable by graphics device = 4096M
[ 1.603942] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
[ 1.603943] fb: switching to inteldrmfb from EFI VGA
[ 1.603957] Console: switching to colour dummy device 80x25
[ 1.604058] [drm] Replacing VGA console driver
[ 1.606767] [drm] amdgpu kernel modesetting enabled.
[ 1.606776] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 1.606864] ATPX version 1, functions 0x00000033
[ 1.606928] ATPX Hybrid Graphics
[ 1.608465] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.608466] AMD IOMMUv2 functionality not available on this system
[ 1.610095] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.610096] [drm] Driver supports precise vblank timestamp query.
[ 1.610598] CRAT table not found
[ 1.610599] Finished initializing topology ret=0
[ 1.610610] kfd kfd: Initialized module
[ 1.610811] amdgpu 0000:01:00.0: enabling device (0006 -> 0007)
[ 1.610962] [drm] initializing kernel modesetting (TOPAZ 0x1002:0x6900 0x1028:0x0767 0xC3).
[ 1.610970] [drm] register mmio base: 0xD0200000
[ 1.610971] [drm] register mmio size: 262144
[ 1.610980] [drm] probing gen 2 caps for device 8086:9d10 = 1724843/e
[ 1.610981] [drm] probing mlw for device 8086:9d10 = 1724843
[ 1.614353] vga_switcheroo: enabled
[ 1.614404] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.615214] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[ 1.640069] usb 1-2: new full-speed USB device number 3 using xhci_hcd
[ 1.648640] ATOM BIOS: BR46858.006
[ 1.648657] [drm] GPU posting now...
[ 1.654097] [drm] Changing default dispclk from 0Mhz to 600Mhz
[ 1.654187] [drm] vm size is 64 GB, block size is 13-bit, fragment size is 9-bit
[ 1.654264] amdgpu 0000:01:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[ 1.654265] amdgpu 0000:01:00.0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[ 1.654268] [drm] Detected VRAM RAM=4096M, BAR=256M
[ 1.654269] [drm] RAM width 64bits GDDR5
[ 1.654321] [TTM] Zone kernel: Available graphics memory: 8161052 kiB
[ 1.654323] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.654323] [TTM] Initializing pool allocator
[ 1.654329] [TTM] Initializing DMA pool allocator
[ 1.654351] [drm] amdgpu: 4096M of VRAM memory ready
[ 1.654352] [drm] amdgpu: 4096M of GTT memory ready.
[ 1.654358] [drm] GART: num cpu pages 65536, num gpu pages 65536
[ 1.655069] [drm] PCIE GART of 256M enabled (table at 0x000000F400040000).
[ 1.655137] amdgpu 0000:01:00.0: amdgpu: using MSI.
[ 1.655137] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.655138] [drm] Driver supports precise vblank timestamp query.
[ 1.655150] [drm] amdgpu: irq initialized.
[ 1.655174] amdgpu: [powerplay] amdgpu: powerplay sw initialized
[ 1.655420] amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000000400080, cpu addr 0x (ptrval)
[ 1.655537] amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000000400100, cpu addr 0x (ptrval)
[ 1.655589] amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000000400180, cpu addr 0x (ptrval)
[ 1.655653] amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000000400200, cpu addr 0x (ptrval)
[ 1.655706] amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000000400280, cpu addr 0x (ptrval)
[ 1.655766] amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000400300, cpu addr 0x (ptrval)
[ 1.655822] amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000000400380, cpu addr 0x (ptrval)
[ 1.655877] amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000000400400, cpu addr 0x (ptrval)
[ 1.655942] amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000000400480, cpu addr 0x (ptrval)
[ 1.655979] amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x0000000000400520, cpu addr 0x (ptrval)
[ 1.656435] amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000000004005a0, cpu addr 0x (ptrval)
[ 1.656485] amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x0000000000400620, cpu addr 0x (ptrval)
[ 1.686140] amdgpu: [powerplay] can't get the mac of 5
[ 1.692072] [drm] ring test on 0 succeeded in 13 usecs
[ 1.693256] [drm] ring test on 9 succeeded in 8 usecs
[ 1.693264] [drm] ring test on 1 succeeded in 2 usecs
[ 1.693315] [drm] ring test on 2 succeeded in 21 usecs
[ 1.693341] [drm] ring test on 3 succeeded in 10 usecs
[ 1.693370] [drm] ring test on 4 succeeded in 11 usecs
[ 1.693397] [drm] ring test on 5 succeeded in 11 usecs
[ 1.693423] [drm] ring test on 6 succeeded in 10 usecs
[ 1.693450] [drm] ring test on 7 succeeded in 11 usecs
[ 1.693477] [drm] ring test on 8 succeeded in 10 usecs
[ 1.693520] [drm] ring test on 10 succeeded in 6 usecs
[ 1.693527] [drm] ring test on 11 succeeded in 6 usecs
[ 1.693725] [drm] ib test on ring 0 succeeded
[ 1.693876] [drm] ib test on ring 1 succeeded
[ 1.693934] [drm] ib test on ring 2 succeeded
[ 1.693982] [drm] ib test on ring 3 succeeded
[ 1.694030] [drm] ib test on ring 4 succeeded
[ 1.694078] [drm] ib test on ring 5 succeeded
[ 1.694127] [drm] ib test on ring 6 succeeded
[ 1.694175] [drm] ib test on ring 7 succeeded
[ 1.694222] [drm] ib test on ring 8 succeeded
[ 1.694254] [drm] ib test on ring 9 succeeded
[ 1.694289] [drm] ib test on ring 10 succeeded
[ 1.694323] [drm] ib test on ring 11 succeeded
[ 1.696617] amdgpu 0000:01:00.0: kfd not supported on this ASIC
[ 1.696621] [drm] Initialized amdgpu 3.23.0 20150101 for 0000:01:00.0 on minor 1
[ 1.697390] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 1.795740] usb 1-2: New USB device found, idVendor=046d, idProduct=c52b
[ 1.795741] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.795742] usb 1-2: Product: USB Receiver
[ 1.795743] usb 1-2: Manufacturer: Logitech
[ 1.861003] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.862569] ata1.00: ATA-9: SanDisk X400 2.5 7MM 256GB, X4152012, max UDMA/133
[ 1.862570] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.865227] ata1.00: configured for UDMA/133
[ 1.865570] scsi 0:0:0:0: Direct-Access ATA SanDisk X400 2.5 2012 PQ: 0 ANSI: 5
[ 1.866006] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.866115] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.866139] sd 0:0:0:0: [sda] Write Protect is off
[ 1.866140] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.866212] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.866943] sda: sda1 sda2 < sda5 >
[ 1.867482] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.928092] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 1.980319] clocksource: Switched to clocksource tsc
[ 2.038422] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.039312] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 2.053221] fbcon: inteldrmfb (fb0) is primary device
[ 2.053255] Console: switching to colour frame buffer device 240x67
[ 2.053275] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.094237] usb 1-5: New USB device found, idVendor=0bda, idProduct=568a
[ 2.094239] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.094240] usb 1-5: Product: Integrated Webcam
[ 2.094241] usb 1-5: Manufacturer: CNFFH36N295011001402
[ 2.094242] usb 1-5: SerialNumber: 0x0001
[ 2.153863] random: fast init done
[ 2.180533] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.185884] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100
[ 2.189367] ata2.00: configured for UDMA/100
[ 2.193023] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU90N A1C1 PQ: 0 ANSI: 5
[ 2.224088] usb 1-6: new high-speed USB device number 5 using xhci_hcd
[ 2.225542] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.225563] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.225565] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.258001] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.258003] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.258198] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.258293] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.299407] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4648]
[ 2.327814] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1206..]
[ 2.327818] psmouse serio1: synaptics: Your touchpad (PNP: DLL0767 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 2.376851] usb 1-6: New USB device found, idVendor=0bda, idProduct=0129
[ 2.376852] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.376854] usb 1-6: Product: USB2.0-CRW
[ 2.376854] usb 1-6: Manufacturer: Generic
[ 2.376855] usb 1-6: SerialNumber: 20100201396000000
[ 2.384528] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x0, board id: 3240, fw id: 2374689
[ 2.420843] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.504055] usb 1-8: new full-speed USB device number 6 using xhci_hcd
[ 2.654095] usb 1-8: New USB device found, idVendor=0cf3, idProduct=e009
[ 2.654097] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.657131] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C52F.0001/input/input8
[ 2.657362] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[ 2.657509] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52F.0002/input/input9
[ 2.659123] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
[ 2.660407] usbcore: registered new interface driver rtsx_usb
[ 2.716467] hid-generic 0003:046D:C52F.0002: input,hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[ 2.780269] [drm] RC6 on
[ 2.785847] input: Logitech K270 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0005/0003:046D:4003.0006/input/input10
[ 2.785900] logitech-hidpp-device 0003:046D:4003.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:14.0-2:2
[ 2.817161] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.938460] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.961467] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 2.980082] systemd[1]: Detected architecture x86-64.
[ 2.982017] systemd[1]: Set hostname to <inspiron-5567>.
[ 3.069807] systemd[1]: Created slice User and Session Slice.
[ 3.069969] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.070002] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.070008] systemd[1]: Reached target Remote File Systems.
[ 3.070013] systemd[1]: Reached target User and Group Name Lookups.
[ 3.070092] systemd[1]: Created slice System Slice.
[ 3.070104] systemd[1]: Reached target Slices.
[ 3.082321] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 3.098149] lp: driver loaded but no devices found
[ 3.104896] ppdev: user-space parallel port driver
[ 3.132340] systemd-journald[274]: Received request to flush runtime journal from PID 1
[ 3.157458] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 3.328592] input: DELL Wireless hotkeys as /devices/virtual/input/input11
[ 3.339127] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20170831/nsprepkg-130)
[ 3.381994] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 3.386645] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 3.420041] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 3.427623] i2c_hid i2c-DELL0767:00: i2c-DELL0767:00 supply vdd not found, using dummy regulator
[ 3.455424] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.455569] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 3.469847] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.470259] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 3.470626] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 3.477157] random: crng init done
[ 3.477159] random: 7 urandom warning(s) missed due to ratelimiting
[ 3.535108] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input12
[ 3.537698] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.568276] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.598162] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 3.598165] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.598166] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.598166] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.598167] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.598168] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 3.601472] Bluetooth: Core ver 2.22
[ 3.601487] NET: Registered protocol family 31
[ 3.601487] Bluetooth: HCI device and connection manager initialized
[ 3.601490] Bluetooth: HCI socket layer initialized
[ 3.601491] Bluetooth: L2CAP socket layer initialized
[ 3.601495] Bluetooth: SCO socket layer initialized
[ 3.613061] media: Linux media interface: v0.10
[ 3.622012] usbcore: registered new interface driver btusb
[ 3.628264] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 3.628266] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[ 3.628966] Linux video capture interface: v2.00
[ 3.633006] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 3.633775] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 3.635122] AVX2 version of gcm_enc/dec engaged.
[ 3.635123] AES CTR mode by8 optimization enabled
[ 3.657483] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 3.662924] uvcvideo: Found UVC 1.00 device Integrated Webcam (0bda:568a)
[ 3.666042] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 3.666044] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
[ 3.666046] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 3.666047] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 3.666527] input: Integrated Webcam: Integrated W as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13
[ 3.667028] usbcore: registered new interface driver uvcvideo
[ 3.667029] USB Video Class driver (1.1.1)
[ 3.724123] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 3.769840] input: DELL0767:00 06CB:7E92 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-5/i2c-DELL0767:00/0018:06CB:7E92.0007/input/input15
[ 3.769929] hid-multitouch 0018:06CB:7E92.0007: input,hidraw4: I2C HID v1.00 Mouse [DELL0767:00 06CB:7E92] on i2c-DELL0767:00
[ 3.772732] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: id=00e4
[ 3.772747] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID)
[ 3.772750] pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00000081/00002000
[ 3.772752] pcieport 0000:00:1c.4: [ 0] Receiver Error (First)
[ 3.772754] pcieport 0000:00:1c.4: [ 7] Bad DLLP
[ 3.772764] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: id=00e4
[ 3.772770] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 3.772771] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: id=00e4
[ 3.772776] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 3.772778] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: id=00e4
[ 3.772783] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 3.808353] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: id=00e4
[ 3.808362] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID)
[ 3.808365] pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00002001/00002000
[ 3.808371] pcieport 0000:00:1c.4: [ 0] Receiver Error (First)
[ 3.808375] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: id=00e4
[ 3.808381] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 3.808382] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: id=00e4
[ 3.808388] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 3.808389] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: id=00e4
[ 3.808395] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 3.808396] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: id=00e4
[ 3.808401] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 3.808403] pcieport 0000:00:1c.4: AER: Corrected error received: id=00e4
[ 3.808408] pcieport 0000:00:1c.4: can't find device of ID00e4
[ 3.827658] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 3.827853] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.864386] intel_rapl: Found RAPL domain package
[ 3.864387] intel_rapl: Found RAPL domain core
[ 3.864388] intel_rapl: Found RAPL domain uncore
[ 3.864389] intel_rapl: Found RAPL domain dram
[ 3.921758] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
[ 3.921766] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[ 3.923964] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
[ 3.927277] ath10k_pci 0000:02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 1028:1810
[ 3.927279] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[ 3.927700] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.1.0-00002-QCATFSWPZ-5 api 5 features ignore-otp crc32 c3e0d04f
[ 3.956697] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 3.956699] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.956701] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 3.956702] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.956703] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.956705] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 3.956706] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 3.956707] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 4.002541] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[ 4.032557] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 4.032603] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 4.032649] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 4.032690] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 4.032742] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 4.032782] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[ 4.636565] ath10k_pci 0000:02:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 4.642092] ath: EEPROM regdomain: 0x6c
[ 4.642093] ath: EEPROM indicates we should expect a direct regpair map
[ 4.642093] ath: Country alpha2 being used: 00
[ 4.642094] ath: Regpair used: 0x6c
[ 4.645660] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[ 5.153874] audit: type=1400 audit(1540492898.520:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=703 comm="apparmor_parser"
[ 5.154136] audit: type=1400 audit(1540492898.520:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=702 comm="apparmor_parser"
[ 5.154138] audit: type=1400 audit(1540492898.520:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=702 comm="apparmor_parser"
[ 5.154140] audit: type=1400 audit(1540492898.520:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=702 comm="apparmor_parser"
[ 5.155149] audit: type=1400 audit(1540492898.520:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=704 comm="apparmor_parser"
[ 5.156563] audit: type=1400 audit(1540492898.524:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=699 comm="apparmor_parser"
[ 5.156566] audit: type=1400 audit(1540492898.524:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=699 comm="apparmor_parser"
[ 5.156567] audit: type=1400 audit(1540492898.524:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=699 comm="apparmor_parser"
[ 5.156570] audit: type=1400 audit(1540492898.524:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=699 comm="apparmor_parser"
[ 5.156581] audit: type=1400 audit(1540492898.524:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=706 comm="apparmor_parser"
[ 5.231610] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.231611] Bluetooth: BNEP filters: protocol multicast
[ 5.231614] Bluetooth: BNEP socket layer initialized
[ 5.403382] vboxdrv: loading out-of-tree module taints kernel.
[ 5.403526] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 5.411755] vboxdrv: Found 4 processor cores
[ 5.432225] vboxdrv: TSC mode is Invariant, tentative frequency 2904000192 Hz
[ 5.432226] vboxdrv: Successfully loaded version 5.2.20 (interface 0x00290001)
[ 5.544153] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 5.635494] VBoxNetFlt: Successfully started.
[ 5.637751] VBoxNetAdp: Successfully started.
[ 5.639059] VBoxPciLinuxInit
[ 5.641338] vboxpci: IOMMU not found (not registered)
[ 5.752072] r8169 0000:03:00.0 enp3s0: link down
[ 5.752137] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 5.754656] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 6.630902] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 6.686483] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 11.547769] wlp2s0: authenticate with ac:84:c9:30:df:b7
[ 11.575862] wlp2s0: send auth to ac:84:c9:30:df:b7 (try 1/3)
[ 11.577029] wlp2s0: authenticated
[ 11.584084] wlp2s0: associate with ac:84:c9:30:df:b7 (try 1/3)
[ 11.587263] wlp2s0: RX AssocResp from ac:84:c9:30:df:b7 (capab=0x511 status=0 aid=110)
[ 11.590582] wlp2s0: associated
[ 11.590672] ath: EEPROM regdomain: 0x80fa
[ 11.590673] ath: EEPROM indicates we should expect a country code
[ 11.590674] ath: doing EEPROM country->regdmn map search
[ 11.590676] ath: country maps to regdmn code: 0x37
[ 11.590677] ath: Country alpha2 being used: FR
[ 11.590678] ath: Regpair used: 0x37
[ 11.590680] ath: regdomain 0x80fa dynamically updated by country IE
[ 11.598357] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by ac:84:c9:30:df:b7
[ 11.710425] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 14.044801] amdgpu: [powerplay] VI should always have 2 performance levels
[ 14.091848] amdgpu 0000:01:00.0: GPU pci config reset
[ 17.426087] [drm] PCIE GART of 256M enabled (table at 0x000000F400040000).
[ 17.433786] amdgpu: [powerplay] can't get the mac of 5
[ 17.444291] [drm] ring test on 0 succeeded in 11 usecs
[ 17.444780] [drm] ring test on 9 succeeded in 3 usecs
[ 17.444786] [drm] ring test on 1 succeeded in 1 usecs
[ 17.444810] [drm] ring test on 2 succeeded in 10 usecs
[ 17.444821] [drm] ring test on 3 succeeded in 4 usecs
[ 17.444833] [drm] ring test on 4 succeeded in 4 usecs
[ 17.444844] [drm] ring test on 5 succeeded in 4 usecs
[ 17.444856] [drm] ring test on 6 succeeded in 4 usecs
[ 17.444868] [drm] ring test on 7 succeeded in 4 usecs
[ 17.444881] [drm] ring test on 8 succeeded in 5 usecs
[ 17.444925] [drm] ring test on 10 succeeded in 4 usecs
[ 17.444931] [drm] ring test on 11 succeeded in 4 usecs
[ 19.552259] Bluetooth: RFCOMM TTY layer initialized
[ 19.552272] Bluetooth: RFCOMM socket layer initialized
[ 19.552284] Bluetooth: RFCOMM ver 1.11
[ 20.424583] rfkill: input handler disabled
[ 23.016727] amdgpu: [powerplay] VI should always have 2 performance levels
[ 23.057914] amdgpu 0000:01:00.0: GPU pci config resetHors ligne
#30 Le 02/11/2018, à 21:37
- maximeay
Re : Ubuntu 18 LTS démarre après 10 secondes...
Aidez-moi s'il vous plait ahaha
Hors ligne
#31 Le 02/11/2018, à 22:21
- Mornagest
Re : Ubuntu 18 LTS démarre après 10 secondes...
A priori, tu perds du temps lorsque ta carte wi-fi cherche à s'authentifier sur ton réseau, entre 6 et 11 secondes dans ton dmesg. J'ignore s'il y a moyen de rendre cette opération plus rapide, ou d'éventuellement la décaler pour qu'elle se déroule après le démarrage de ton système. Il est également possible que ce soit déjà le cas et que cela ne ralentisse pas le démarrage du noyau...
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#32 Le 03/11/2018, à 10:14
- grigouille
Re : Ubuntu 18 LTS démarre après 10 secondes...
Tu perds du temps ici :
[ 6.686483] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 11.547769] wlp2s0: authenticate with ac:84:c9:30:df:b7[ 11.710425] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 14.044801] amdgpu: [powerplay] VI should always have 2 performance levels
[ 14.091848] amdgpu 0000:01:00.0: GPU pci config reset
[ 17.426087] [drm] PCIE GART of 256M enabled (table at 0x000000F400040000).[ 17.444931] [drm] ring test on 11 succeeded in 4 usecs
[ 19.552259] Bluetooth: RFCOMM TTY layer initialized
[ 19.552272] Bluetooth: RFCOMM socket layer initialized
[ 19.552284] Bluetooth: RFCOMM ver 1.11
[ 20.424583] rfkill: input handler disabled
[ 23.016727] amdgpu: [powerplay] VI should always have 2 performance levels
[ 23.057914] amdgpu 0000:01:00.0: GPU pci config resetDebian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#33 Le 03/11/2018, à 14:36
- maximeay
Re : Ubuntu 18 LTS démarre après 10 secondes...
grigouille a écrit :
Tu perds du temps ici :
[ 6.686483] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 11.547769] wlp2s0: authenticate with ac:84:c9:30:df:b7[ 11.710425] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 14.044801] amdgpu: [powerplay] VI should always have 2 performance levels [ 14.091848] amdgpu 0000:01:00.0: GPU pci config reset [ 17.426087] [drm] PCIE GART of 256M enabled (table at 0x000000F400040000).[ 17.444931] [drm] ring test on 11 succeeded in 4 usecs [ 19.552259] Bluetooth: RFCOMM TTY layer initialized [ 19.552272] Bluetooth: RFCOMM socket layer initialized [ 19.552284] Bluetooth: RFCOMM ver 1.11 [ 20.424583] rfkill: input handler disabled [ 23.016727] amdgpu: [powerplay] VI should always have 2 performance levels [ 23.057914] amdgpu 0000:01:00.0: GPU pci config reset
Que dois-je faire ?
Hors ligne
#34 Le 03/11/2018, à 19:15
- grigouille
Re : Ubuntu 18 LTS démarre après 10 secondes...
Demande à un moteur de recherche. Par exemple :
https://ubuntuforums.org/showthread.php?t=2360695
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#35 Le 07/11/2018, à 22:33
- maximeay
Re : Ubuntu 18 LTS démarre après 10 secondes...
J'ai déjà beaucoup cherché sur internet, mais quoi que je fasse je résous ma mon problème. C'est pour cela que je suis venu demander sur un forum car pourtant je l'avais jamais fais, je te remercie en tout cas c'est gentil !
Hors ligne