#1 Le 24/10/2018, à 18:49
- seramik
[résolu] menu gnu grub
salut à tous
j'ai voulu refaire vivre un vieux sony vaio, c'est un pc portable
il y avait un window qui plantait en 5min
j'ai crée un clé live avec ubuntu 14.08 et lili usb creator
ma clé fonctionne correctement sur d'autres PC et j'ai fait les verif d'usage.
quand je boot sur cette clé j'ai un message " fail to set MokListRT invalid parameter", puis,
le menu de gnu grub s'affiche enfin et mon clavier ne fonctionne plus ( même les touches caps lock ne répondent plus)
la sélection automatique ne fonctionne plus non plus donc plus rien ne se passe
je ne peux donc rien sélectionner dan ce menu
et le pc peut rester des heures comme ça
auriez vous une piste pour moi ?
Dernière modification par seramik (Le 28/10/2018, à 18:20)
Hors ligne
#2 Le 24/10/2018, à 19:17
- lucmars
Re : [résolu] menu gnu grub
j'ai crée un clé live avec ubuntu 14.08 et lili usb creator
ma clé fonctionne correctement sur d'autres PC et j'ai fait les verif d'usage.quand je boot sur cette clé j'ai un message " fail to set MokListRT invalid parameter"
En gras, cela n'existe pas ! En italique, à voir dans le bios qui sait.
1) donne le modele complet de ton pc (c'est à dire, comme sur une voiture, le numéro du chassis)
2) passes à la 1804 (mais 1408 c'est cela que tu voulais dire, non ?).
3) si tu peut booter en mode "essayer" sans misère, fais-nous un boot-info (voir la doc).
Gaulois Matter !
Hors ligne
#3 Le 24/10/2018, à 20:24
- seramik
Re : [résolu] menu gnu grub
ok milles excuses, c'est Ubuntu 18.04
le pc, c'est un vaio de chez Sony,
processeur intelcore2duo p8600 2.4ghz en 64 bits,
il y a 4go de ram
le modele exact c'est PCG-6Z2M
je ne peux pas booter en mode "essayer" car jen'ai pas la main sous le menu GNU GRUB
en gros je n'ai pas la main sur ce PC
je vais tenter d'autres distribution ( xuuntu ou lubuntu)
dans mon bios , y' pas grand chose à régler, juste à dire le support sur lequel on boot
Hors ligne
#4 Le 25/10/2018, à 17:47
- lucmars
Re : [résolu] menu gnu grub
Ok, je pige : ça boot mais t'as que du plastique sous la main !
Vois la liste des portables dans la doc si le tien s'y trouve. Par ailleurs, rétrograde vers 160401 pour voir (peu importe la variante).
Gaulois Matter !
Hors ligne
#5 Le 25/10/2018, à 20:25
- seramik
Re : [résolu] menu gnu grub
des nouvelles du jour, j'ai tenté d'installer d'autres distributions, lubuntu, kubuntu ; même problème
j'ai aussi tenté debian,ça boot correctement mais ça plante aussi un peu plus loin mais ça plante aussi.
Mince mon portable ne figure pas dans la liste des portables,
ça ne veut pas dire que ça ne marchera pas, et pis si ça marche, on le rajoutera
j'essaye le 16.04.1 ce soir
Dernière modification par seramik (Le 25/10/2018, à 20:39)
Hors ligne
#6 Le 25/10/2018, à 20:36
- Mornagest
Re : [résolu] menu gnu grub
Salut,
Je ne sais pas si ça peut aider lucmars à t'aider, mais j'ai trouvé ceci : https://marcin.juszkiewicz.com.pl/2016/ … parameter/
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#7 Le 25/10/2018, à 21:30
- seramik
Re : [résolu] menu gnu grub
ok génial la vieille version 16.04.1 marche bien, ça boot dessus
le menu grub fonctionne
je tente l'installation
mauvaise nouvelle :
j'ai tenté l'installation depuis la version test, il y avait des erreurs pendant l'install ( j'avais directement demandé des package avec mise jour et la bonne langue)
ça a foiré et au redemarrage, ça disait : "operating system not found"
bien sur j'avais re-paramétré mon bios
alors j'ai tenté une install direct depuis le menu de démarrage ( grub) ça a fonctionné sans aucune erreur (j'ai demandé l'intall la plus simple sans update ni modif de langue)
Mais je tombe toujours le même message : "operating system not found"
j'ai bien sur tenté plusieurs fois.
des idées ?
ça avance merci beaucoup à vous
Dernière modification par seramik (Le 25/10/2018, à 22:58)
Hors ligne
#8 Le 26/10/2018, à 07:44
- malbo
Re : [résolu] menu gnu grub
Bonjour,
Puisque tu as écrit dans ton post #7 que tu parvenais à démarrer sur la version 16.04.1, je te prie de démarrer en session live (choix "Essayer Ubuntu") sur cette 16.04.1 et de faire un Boot-Info. Tu donneras l'URL de ce Boot-Info dans ta réponse. J'espère qu'on pourra trouver dans ce Boot-Info la raison de ce blocage.
Hors ligne
#9 Le 26/10/2018, à 10:14
- seramik
Re : [résolu] menu gnu grub
Hors ligne
#10 Le 26/10/2018, à 11:00
- malbo
Re : [résolu] menu gnu grub
Ton Boot-Info est là :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.03
Boot sector info: Syslinux looks at sector 16400 of /dev/sda1 for its
second stage. The integrity check of Syslinux failed.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi
/EFI/BOOT/grubx64.efi /ldlinux.sys
sda2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi
/EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 3.8 GiB, 4089445376 bytes, 7987198 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 7,987,076 7,987,014 c W95 FAT32 (LBA)
/dev/sda2 7,987,077 7,987,139 63 ea Unknown
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 488,397,167 488,397,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sdb2 1,050,624 484,345,855 483,295,232 Data partition (Linux)
/dev/sdb3 484,345,856 488,396,799 4,050,944 Swap partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 7A38-C2F6 vfat UBUNTU 16_0
/dev/sda2
/dev/sdb1 C2D1-B6DB vfat
/dev/sdb2 e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6 ext4
/dev/sdb3 a85681f0-675a-4408-926c-416e6da9bbca swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Oct 26 07:56 ata-MATSHITADVD-RAM_UJ862AS_HG02_019336 -> ../../sr0
lrwxrwxrwx 1 root root 9 Oct 26 07:59 ata-TOSHIBA_MK2552GSX_1975P548T -> ../../sdb
lrwxrwxrwx 1 root root 10 Oct 26 07:59 ata-TOSHIBA_MK2552GSX_1975P548T-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Oct 26 07:59 ata-TOSHIBA_MK2552GSX_1975P548T-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Oct 26 07:59 ata-TOSHIBA_MK2552GSX_1975P548T-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 9 Oct 26 07:59 usb-JetFlash_TS4GJFV30_OPA242DX-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Oct 26 07:59 usb-JetFlash_TS4GJFV30_OPA242DX-0:0-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct 26 07:59 usb-JetFlash_TS4GJFV30_OPA242DX-0:0-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 Oct 26 07:59 wwn-0x5000039182380695 -> ../../sdb
lrwxrwxrwx 1 root root 10 Oct 26 07:59 wwn-0x5000039182380695-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Oct 26 07:59 wwn-0x5000039182380695-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Oct 26 07:59 wwn-0x5000039182380695-part3 -> ../../sdb3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash ---
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sda1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
DEFAULT loadconfig
LABEL loadconfig
CONFIG /isolinux/isolinux.cfg
APPEND /isolinux/
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sda1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
========================== sdb1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6 root hd1,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sdb2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
else
search --no-floppy --fs-uuid --set=root e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
else
search --no-floppy --fs-uuid --set=root e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
fi
linux /boot/vmlinuz-4.4.0-138-generic.efi.signed root=UUID=e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-138-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6' {
menuentry 'Ubuntu, avec Linux 4.4.0-138-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-138-generic-advanced-e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
else
search --no-floppy --fs-uuid --set=root e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
fi
echo 'Chargement de Linux 4.4.0-138-generic…'
linux /boot/vmlinuz-4.4.0-138-generic.efi.signed root=UUID=e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-138-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-138-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-138-generic-init-upstart-e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
else
search --no-floppy --fs-uuid --set=root e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
fi
echo 'Chargement de Linux 4.4.0-138-generic…'
linux /boot/vmlinuz-4.4.0-138-generic.efi.signed root=UUID=e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-138-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-138-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-138-generic-recovery-e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
else
search --no-floppy --fs-uuid --set=root e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
fi
echo 'Chargement de Linux 4.4.0-138-generic…'
linux /boot/vmlinuz-4.4.0-138-generic.efi.signed root=UUID=e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-138-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-advanced-e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
else
search --no-floppy --fs-uuid --set=root e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
fi
echo 'Chargement de Linux 4.4.0-31-generic…'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-31-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-init-upstart-e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
else
search --no-floppy --fs-uuid --set=root e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
fi
echo 'Chargement de Linux 4.4.0-31-generic…'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-31-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-recovery-e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
else
search --no-floppy --fs-uuid --set=root e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6
fi
echo 'Chargement de Linux 4.4.0-31-generic…'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-31-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb2 during installation
UUID=e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sdb1 during installation
UUID=C2D1-B6DB /boot/efi vfat umask=0077 0 1
# swap was on /dev/sdb3 during installation
UUID=a85681f0-675a-4408-926c-416e6da9bbca none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
216.794265747 = 232.781070336 boot/grub/grub.cfg 1
2.382648468 = 2.558349312 boot/vmlinuz-4.4.0-138-generic 1
2.726402283 = 2.927452160 boot/vmlinuz-4.4.0-138-generic.efi.signed 2
1.613006592 = 1.731952640 boot/vmlinuz-4.4.0-31-generic 2
1.613006592 = 1.731952640 vmlinuz 2
3.192844391 = 3.428290560 boot/initrd.img-4.4.0-138-generic 3
2.831958771 = 3.040792576 boot/initrd.img-4.4.0-31-generic 2
2.831958771 = 3.040792576 initrd.img 2
2.831958771 = 3.040792576 initrd.img.old 2
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/8622/mounts) leaked on lvs invocation. Parent PID 17321: bash
File descriptor 63 (pipe:[63051]) leaked on lvs invocation. Parent PID 17321: bash
ADDITIONAL INFORMATION :
=================== log of boot-info 20181026_0759 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 16.04.1 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
ls: cannot access '/home/usr/.config': No such file or directory
NTFS signature is missing.
Failed to mount '/dev/sda2': Invalid argument
The device '/dev/sda2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount /dev/sda2 : Error code 12
mount -r /dev/sda2 /mnt/boot-sav/sda2
NTFS signature is missing.
Failed to mount '/dev/sda2': Invalid argument
The device '/dev/sda2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount -r /dev/sda2 : Error code 12
=================== os-prober:
/dev/sdb2:Ubuntu 16.04.1 LTS (16.04):Ubuntu:linux
=================== blkid:
/dev/sda1: LABEL="UBUNTU 16_0" UUID="7A38-C2F6" TYPE="vfat" PARTUUID="05061ed3-01"
/dev/loop0: TYPE="squashfs"
/dev/sdb1: UUID="C2D1-B6DB" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="503d6221-2682-4647-9059-dc7fff343ef2"
/dev/sdb2: UUID="e6b0ddf8-56a1-4d9f-b974-1ccedf87eed6" TYPE="ext4" PARTUUID="c196146d-1f73-4d00-a7a8-6ab5c23cfe0a"
/dev/sdb3: UUID="a85681f0-675a-4408-926c-416e6da9bbca" TYPE="swap" PARTUUID="f3ef57b2-8339-42d6-9d44-be8472fa69e8"
/dev/sda2: PARTUUID="05061ed3-02"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
NTFS signature is missing.
Failed to mount '/dev/sda2': Invalid argument
The device '/dev/sda2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount /dev/sda2 : Error code 12
mount -r /dev/sda2 /mnt/boot-sav/sda2
NTFS signature is missing.
Failed to mount '/dev/sda2': Invalid argument
The device '/dev/sda2' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount -r /dev/sda2 : Error code 12
Presence of EFI/Boot file detected: /mnt/boot-sav/sdb1/EFI/Boot/fbx64.efi
=================== sdb2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Oct 25 20:28 grub.d
total 80
-rwxr-xr-x 1 root root 9791 Jun 17 2016 00_header
-rwxr-xr-x 1 root root 6258 Mar 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 Mar 21 2018 10_linux
-rwxr-xr-x 1 root root 11082 Jun 17 2016 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 Jun 17 2016 30_os-prober
-rwxr-xr-x 1 root root 1418 Jun 17 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jun 17 2016 40_custom
-rwxr-xr-x 1 root root 216 Jun 17 2016 41_custom
-rw-r--r-- 1 root root 483 Jun 17 2016 README
=================== sdb2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sdb2: UUID=C2D1-B6DB (sdb1)
ls /sys/firmware/efi/vars : SmmS3NvsData-8983fd2d-113c-4e2b-8f47-0abfeb20a41a,SmbiosPolicy-41a3ee4e-6d57-418b-8f8e-c366a5b70c4b,Setup-a04a27f4-df00-4d42-b552-39511302113d,PowerOnPassword-8be4df61-93ca-11d2-aa0d-00e098032b8c,OneTimeBoot-8be4df61-93ca-11d2-aa0d-00e098032b8c,Offset-d0df236b-385a-4609-b988-3938fa526ed9,new_var,MTC-eb704011-1402-11d3-8e77-00a0c969723b,LegacyDevOrder-a56074db-65fe-45f7-bd21-2d2bdd8e9652,LangCodes-8be4df61-93ca-11d2-aa0d-00e098032b8c,Lang-8be4df61-93ca-11d2-aa0d-00e098032b8c,HybridGraphicsGlobalVariable-4c47e0c8-1f60-447f-81b4-bdc35bf1e4cf,EXTB-8be4df61-93ca-11d2-aa0d-00e098032b8c,ErrOutDev-8be4df61-93ca-11d2-aa0d-00e098032b8c,del_var,CustomBootOrder-8be4df61-93ca-11d2-aa0d-00e098032b8c,Custom-a04a27f4-df00-4d42-b552-39511302113d,ConOutDev-8be4df61-93ca-11d2-aa0d-00e098032b8c,ConOut-8be4df61-93ca-11d2-aa0d-00e098032b8c,ConInDev-8be4df61-93ca-11d2-aa0d-00e098032b8c,ConIn-8be4df61-93ca-11d2-aa0d-00e098032b8c,BootOrder-8be4df61-93ca-11d2-aa0d-00e098032b8c,BootCurrent-8be4df61-93ca-11d2-aa0d-00e098032b8c,Boot0003-8be4df61-93ca-11d2-aa0d-00e098032b8c,Boot0002-8be4df61-93ca-11d2-aa0d-00e098032b8c,Boot0001-8be4df61-93ca-11d2-aa0d-00e098032b8c,Boot0000-8be4df61-93ca-11d2-aa0d-00e098032b8c,BiosReleaseDate-8be4df61-93ca-11d2-aa0d-00e098032b8c,BackupLang-8be4df61-93ca-11d2-aa0d-00e098032b8c,AcpiGlobalVariable-c020489e-6db2-4ef2-9aa5-ca06fc11d36a,
Please report this message to boot.repair@gmail.com
=================== efibootmgr -v
BootCurrent: 0003
BootOrder: 0003,0001,0000,0002
Boot0000* TOSHIBA MK2552GSX BBS(HD,,0x0).......................................................................
Boot0001* MATSHITADVD-RAM UJ862AS BBS(CDROM,,0x0).......................................................................
Boot0002* JetFlashTS4GJFV30 BBS(18,,0x500)..................y.......w...{........................................
Boot0003* Acpi(PNP0A03,0)/Pci(1D|7)/Usb(2, 0)/HD(Part1,Sig05061ED3) PciRoot(0x0)/Pci(0x1d,0x7)/USB(2,0)/HD(1,MBR,0x4294967251,0x3f,0x79df46)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot maybe enabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sdb1.
sdb2 : sdb, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb2.
sda2 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda2.
sdb : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, usb-disk, not-mmc, no-os, 63 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:4089MB:scsi:512:512:msdos:JetFlash TS4GJFV30:;
1:32.3kB:4089MB:4089MB:fat32::boot, lba;
2:4089MB:4089MB:32.3kB:::;
BYT;
/dev/sdb:250GB:scsi:512:512:gpt:ATA TOSHIBA MK2552GS:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:248GB:247GB:ext4::;
3:248GB:250GB:2074MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 3.8G
sda1 part vfat 3.8G UBUNTU 16_0
sda2 part 31.5K
sdb disk 232.9G
sdb1 part vfat 512M
sdb2 part ext4 230.5G
sdb3 part swap 2G
sr0 rom 1024M
loop0 loop squashfs 1.4G
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 1 running
sda1 1 0 1 /cdrom
sda2 1 0 1
sdb 1 0 0 running
sdb1 1 0 0 /mnt/boot-sav/sdb1
sdb2 1 0 0 /mnt/boot-sav/sdb2
sdb3 1 0 0 [SWAP]
sr0 1 0 1 running
loop0 1 1 0 /rofs
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=973892k,nr_inodes=243473,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=197708k,mode=755)
/dev/sda1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=33,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=197708k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sdb1 on /mnt/boot-sav/sdb1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdb2 on /mnt/boot-sav/sdb2 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb2 sdb3 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 initctl input kmsg lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sdb sdb1 sdb2 sdb3 serial sg0 sg1 sg2 shm snapshot snd sonypi sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 00 04 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 db b6 d1 c2 4e 4f 20 4e 41 4d 45 20 20 |..)....NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 952M 0 952M 0% /dev
tmpfs tmpfs 194M 6.3M 187M 4% /run
/dev/sda1 vfat 3.9G 1.5G 2.4G 38% /cdrom
/dev/loop0 squashfs 1.4G 1.4G 0 100% /rofs
/cow overlay 966M 103M 863M 11% /
tmpfs tmpfs 966M 232K 966M 1% /dev/shm
tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock
tmpfs tmpfs 966M 0 966M 0% /sys/fs/cgroup
tmpfs tmpfs 966M 264K 966M 1% /tmp
tmpfs tmpfs 194M 84K 193M 1% /run/user/999
/dev/sdb1 vfat 511M 4.7M 507M 1% /mnt/boot-sav/sdb1
/dev/sdb2 ext4 227G 4.3G 211G 2% /mnt/boot-sav/sdb2
=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/loop0: 1.4 GiB, 1459982336 bytes, 2851528 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 3.8 GiB, 4089445376 bytes, 7987198 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x05061ed3
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 63 7987076 7987014 3.8G c W95 FAT32 (LBA)
/dev/sda2 7987077 7987139 63 31.5K ea Rufus alignment
Disk /dev/sdb: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: C6F21C08-E20A-4A3A-B572-BDF87C858D30
Device Start End Sectors Size Type
/dev/sdb1 2048 1050623 1048576 512M EFI System
/dev/sdb2 1050624 484345855 483295232 230.5G Linux filesystem
/dev/sdb3 484345856 488396799 4050944 2G Linux swap
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sdb2, using the following options: sdb1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sdb1/efi/.../grub*.efi file!
=================== User settings
The settings chosen by the user will not act on the boot.
Je pense que tu ne vas pas arriver à démarrer sur ton Ubuntu du disque dur à cause du verrouillage du démarrage de ton ordi pratiqué par Sony. Je te suggère si ce n'est déjà fait de désactiver "Secure Boot" (voir ce post) puis de passer de UEFI à Legacy suivant indications de ce post : https://forum.ubuntu-fr.org/viewtopic.p … #p15542741
C'est cet extrait du post :
Aux manipulations faites par Syrkos, il faut en ajouter une qui, si mes souvenirs sont bons (ce portable n'est pas à moi mais à une parente) se situe aussi dans la partie "sécurity" du BIOS. Celle-ci consiste à modifier l'option UEFI en Legacy.
Tu pourras refaire l'installation : elle sera faite en mode Bios traditionnel au lieu du mode UEFI actuel. Le verrouillage du démarrage ne concerne que le mode UEFI. Comme tu seras en mode non-UEFI, il n'y aura pas de verrouilage.
Dernière modification par malbo (Le 26/10/2018, à 11:02)
Hors ligne
#11 Le 26/10/2018, à 11:32
- seramik
Re : [résolu] menu gnu grub
théoriquement ça semble super, j'ai bien compris "l'esprit"
il y a juste un truc que je ne comprend pas :
"1) Tout d'abord, se rendre dans le menu "assist" (bouton rouge à côté du power on) lorsque l'ordi est hors tension"
comment je peux aller dans un menu lorsque que mon ordi est hors tension ?
et je n'ai aucune option dans mon bios qui ne cause de UEFI
Dernière modification par seramik (Le 26/10/2018, à 12:10)
Hors ligne
#12 Le 26/10/2018, à 12:23
- malbo
Re : [résolu] menu gnu grub
Il est possible que les liens que j'ai donnés dans le post #10 ne soient pas adaptés pour ton modèle d'ordi. Le souci que j'ai, c'est que le nom de modèle PCG-6Z2M que tu as donné dans le post #3 ne me permet pas de trouver de l'info sur la toile. Je ne sais même pas comment tu fais pour aller dans ton "Bios", je ne sais pas si ton modèle est équipé ou pas d'un bouton "assist". C'est pas toujours facile d'aider...
Est-ce que tu peux dire quel Windows était installé d’origine quand tu as acheté ce modèle (Vista, Win7, Win8) ?
Hors ligne
#13 Le 26/10/2018, à 12:49
- seramik
Re : [résolu] menu gnu grub
alors c'est un pc qu'on ma "filé", il avait vista
effectivement je n'ai pas de bouton "assist" et le bios auquel j'ai accès est assez pauvre en choix
pour accéder a mon bios , je tape f2 au démarrage
il y a effectivement des boutons au dessus du clavier, mais je ne sais pas trop à quoi ils servent
Hors ligne
#14 Le 26/10/2018, à 13:44
- malbo
Re : [résolu] menu gnu grub
De plus en plus brumeux pour moi. Je te prie de faire ce qui est détaillé dans ce post : https://forum.ubuntu-fr.org/viewtopic.p … #p21932660
Hors ligne
#15 Le 26/10/2018, à 14:12
- seramik
Re : [résolu] menu gnu grub
tout ce que j ai retenu c est vaio et ubuntu ne sont pas bon amis
voici ce tu desires
computer
description: Notebook
product: VGN-Z31MN_B (N/A)
vendor: Sony Corporation
version: J003P6WP
serial: [REMOVED]
width: 64 bits
capabilities: smbios-2.4 dmi-2.4 vsyscall32
configuration: boot=normal chassis=notebook family=N/A sku=N/A uuid=[REMOVED]
*-core
description: Motherboard
product: VAIO
vendor: Sony Corporation
physical id: 0
version: N/A
serial: [REMOVED]
slot:
*-firmware
description: BIOS
vendor: INSYDE
physical id: 0
version: R3052M3
date: 01/08/2009
size: 1MiB
capacity: 1472KiB
capabilities: pci pnp upgrade shadowing cdboot bootselect edd int9keyboard int10video acpi usb smartbattery biosbootspecification netboot
*-cpu
description: CPU
product: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz
vendor: Intel Corp.
physical id: d
bus info: cpu@0
version: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz
serial: [REMOVED]
slot: N/A
size: 2401MHz
capacity: 2401MHz
width: 64 bits
clock: 266MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm tpr_shadow vnmi flexpriority dtherm ida cpufreq
*-cache:0
description: L2 cache
physical id: e
slot: L2 Cache
size: 3MiB
capacity: 3MiB
capabilities: synchronous internal write-back unified
configuration: level=2
*-cache:1
description: L1 cache
physical id: f
slot: L1 Cache
size: 128KiB
capacity: 128KiB
capabilities: synchronous internal write-back
configuration: level=1
*-memory
description: System Memory
physical id: 10
slot: System board or motherboard
size: 2GiB
*-bank:0
description: SODIMM 1067 MHz (0.9 ns)
vendor: 0000000000000000
physical id: 0
serial: [REMOVED]
slot: SODIMM1
size: 2GiB
width: 64 bits
clock: 1067MHz (0.9ns)
*-bank:1
description: SODIMM [empty]
physical id: 1
slot: SODIMM2
*-pci
description: Host bridge
product: Mobile 4 Series Chipset Memory Controller Hub
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 07
width: 32 bits
clock: 33MHz
configuration: driver=agpgart-intel
resources: irq:0
*-pci:0
description: PCI bridge
product: Mobile 4 Series Chipset PCI Express Graphics Port
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 07
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:24 ioport:7000(size=4096) memory:a2000000-a4ffffff ioport:80000000(size=268435456)
*-display UNCLAIMED
description: VGA compatible controller
product: G98M [GeForce 9300M GS]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller cap_list
configuration: latency=0
resources: memory:a4000000-a4ffffff memory:80000000-8fffffff memory:a2000000-a3ffffff ioport:7000(size=128)
*-display
description: Display controller
product: Mobile 4 Series Chipset Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 07
width: 64 bits
clock: 33MHz
capabilities: msi pm bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:30 memory:a8400000-a87fffff memory:90000000-9fffffff ioport:8130(size=8)
*-network
description: Ethernet interface
product: 82567LM Gigabit Network Connection
vendor: Intel Corporation
physical id: 19
bus info: pci@0000:00:19.0
logical name: enp0s25
version: 03
serial: [REMOVED]
capacity: 1Gbit/s
width: 32 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k firmware=1.8-3 latency=0 link=no multicast=yes port=twisted pair
resources: irq:28 memory:ae900000-ae91ffff memory:ae924000-ae924fff ioport:8100(size=32)
*-usb:0
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1a
bus info: pci@0000:00:1a.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:23 ioport:80e0(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 4.4.0-31-generic uhci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 4.04
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:1
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #5
vendor: Intel Corporation
physical id: 1a.1
bus info: pci@0000:00:1a.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:23 ioport:80c0(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 4.4.0-31-generic uhci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 4.04
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:2
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #6
vendor: Intel Corporation
physical id: 1a.2
bus info: pci@0000:00:1a.2
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:23 ioport:80a0(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 4.4.0-31-generic uhci_hcd
physical id: 1
bus info: usb@5
logical name: usb5
version: 4.04
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:3
description: USB controller
product: 82801I (ICH9 Family) USB2 EHCI Controller #2
vendor: Intel Corporation
physical id: 1a.7
bus info: pci@0000:00:1a.7
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:23 memory:ae925c00-ae925fff
*-usbhost
product: EHCI Host Controller
vendor: Linux 4.4.0-31-generic ehci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 4.04
capabilities: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-usb:0
description: Video
product: Sony Vaio Integrated Webcam
vendor: Ricoh co. Ltd.
physical id: 2
bus info: usb@1:2
version: 2.07
capabilities: usb-2.00
configuration: driver=uvcvideo maxpower=100mA speed=480Mbit/s
*-usb:1
description: Generic USB device
product: Qualcomm HS-USB
vendor: Qualcomm Incorporated
physical id: 3
bus info: usb@1:3
version: 0.01
capabilities: usb-2.00
configuration: driver=qcserial maxpower=500mA speed=480Mbit/s
*-multimedia
description: Audio device
product: 82801I (ICH9 Family) HD Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 03
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:33 memory:ae920000-ae923fff
*-pci:1
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:25 ioport:6000(size=4096) memory:ad900000-ae8fffff ioport:a8800000(size=16777216)
*-pci:2
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 2
vendor: Intel Corporation
physical id: 1c.1
bus info: pci@0000:00:1c.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:26 ioport:5000(size=4096) memory:ac800000-ad8fffff ioport:a9800000(size=16777216)
*-network
description: Wireless interface
product: WiFi Link 5100
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:06:00.0
logical name: wlp6s0
version: 00
serial: [REMOVED]
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=4.4.0-31-generic firmware=8.83.5.1 build 33692 ip=[REMOVED] latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn
resources: irq:32 memory:ac800000-ac801fff
*-pci:3
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 4
vendor: Intel Corporation
physical id: 1c.3
bus info: pci@0000:00:1c.3
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:27 ioport:4000(size=4096) memory:ab800000-ac7fffff ioport:aa800000(size=16777216)
*-usb:4
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:20 ioport:8080(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 4.4.0-31-generic uhci_hcd
physical id: 1
bus info: usb@6
logical name: usb6
version: 4.04
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:5
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:20 ioport:8060(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 4.4.0-31-generic uhci_hcd
physical id: 1
bus info: usb@7
logical name: usb7
version: 4.04
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:6
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:20 ioport:8040(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 4.4.0-31-generic uhci_hcd
physical id: 1
bus info: usb@8
logical name: usb8
version: 4.04
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:7
description: USB controller
product: 82801I (ICH9 Family) USB2 EHCI Controller #1
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:20 memory:ae925800-ae925bff
*-usbhost
product: EHCI Host Controller
vendor: Linux 4.4.0-31-generic ehci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 4.04
capabilities: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-usb
description: Mass storage device
product: Mass Storage Device
vendor: JetFlash
physical id: 3
bus info: usb@2:3
logical name: scsi0
version: 1.42
serial: [REMOVED]
capabilities: usb-2.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=100mA speed=480Mbit/s
*-disk
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
size: 3899MiB (4089MB)
capabilities: partitioned partitioned:dos
configuration: logicalsectorsize=512 sectorsize=512 signature=05061ed3
*-volume:0
description: Windows FAT volume
vendor: SYSLINUX
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
logical name: /cdrom
version: FAT32
serial: [REMOVED]
size: 3899MiB
capacity: 3899MiB
capabilities: primary bootable fat initialized
configuration: FATs=2 filesystem=fat label=UBUNTU 16_0 mount.fstype=vfat mount.options=ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted
*-volume:1
description: Primary partition
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
capacity: 31KiB
capabilities: primary
*-pci:4
description: PCI bridge
product: 82801 Mobile PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: 93
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
resources: ioport:3000(size=4096) memory:a6000000-a80fffff ioport:a0000000(size=33554432)
*-pcmcia
description: CardBus bridge
product: RL5c476 II
vendor: Ricoh Co Ltd
physical id: 4
bus info: pci@0000:0b:04.0
version: ba
width: 64 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128
resources: iomemory:b00f0c0b0-b00f0c0af irq:20 memory:a8000000-a8000fff ioport:3000(size=256) ioport:3400(size=256) memory:b0000000-b3ffffff memory:b4000000-b7ffffff
*-firewire
description: FireWire (IEEE 1394)
product: R5C832 IEEE 1394 Controller
vendor: Ricoh Co Ltd
physical id: 4.1
bus info: pci@0000:0b:04.1
version: 04
width: 32 bits
clock: 33MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=2
resources: irq:21 memory:a8001000-a80017ff
*-generic:0
description: SD Host controller
product: R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
vendor: Ricoh Co Ltd
physical id: 4.2
bus info: pci@0000:0b:04.2
version: 21
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=sdhci-pci latency=64
resources: irq:22 memory:a8001900-a80019ff
*-generic:1
description: System peripheral
product: R5C592 Memory Stick Bus Host Adapter
vendor: Ricoh Co Ltd
physical id: 4.4
bus info: pci@0000:0b:04.4
version: 11
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=r592 latency=64
resources: irq:22 memory:a8001800-a80018ff
*-isa
description: ISA bridge
product: ICH9M-E LPC Interface Controller
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
resources: irq:0
*-storage
description: SATA controller
product: 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode]
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 03
width: 32 bits
clock: 66MHz
capabilities: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
resources: irq:31 ioport:8128(size=8) ioport:813c(size=4) ioport:8120(size=8) ioport:8138(size=4) ioport:8020(size=32) memory:ae925000-ae9257ff
*-serial UNCLAIMED
description: SMBus
product: 82801I (ICH9 Family) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 03
width: 64 bits
clock: 33MHz
configuration: latency=0
resources: memory:ae926000-ae9260ff ioport:8000(size=32)
*-scsi:0
physical id: 1
logical name: scsi1
capabilities: emulated
*-disk
description: ATA Disk
product: TOSHIBA MK2552GS
vendor: Toshiba
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/sdb
version: 0A
serial: [REMOVED]
size: 232GiB (250GB)
capabilities: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=c6f21c08-e20a-4a3a-b572-bdf87c858d30 logicalsectorsize=512 sectorsize=512
*-volume:0
description: Windows FAT volume
vendor: mkfs.fat
physical id: 1
bus info: scsi@1:0.0.0,1
logical name: /dev/sdb1
version: FAT32
serial: [REMOVED]
size: 510MiB
capacity: 511MiB
capabilities: boot fat initialized
configuration: FATs=2 filesystem=fat name=EFI System Partition
*-volume:1
description: EXT4 volume
vendor: Linux
physical id: 2
bus info: scsi@1:0.0.0,2
logical name: /dev/sdb2
version: 1.0
serial: [REMOVED]
size: 230GiB
capabilities: journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2018-10-25 20:16:29 filesystem=ext4 lastmountpoint=/mnt/boot-sav/sdb2 modified=2018-10-26 08:00:03 mounted=2018-10-26 07:59:51 state=clean
*-volume:2
description: Linux swap volume
vendor: Linux
physical id: 3
bus info: scsi@1:0.0.0,3
logical name: /dev/sdb3
version: 1
serial: [REMOVED]
size: 1977MiB
capacity: 1977MiB
capabilities: nofs swap initialized
configuration: filesystem=swap pagesize=4095
*-scsi:1
physical id: 2
logical name: scsi2
capabilities: emulated
*-cdrom
description: DVD-RAM writer
product: DVD-RAM UJ862AS
vendor: MATSHITA
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/sr0
version: 1.30
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
*-power UNCLAIMED
description: N/A
product: N/A
vendor: N/A
physical id: 1
version: N/A
serial: [REMOVED]
capacity: 32768mWh
*-battery
product: N/A
vendor: N/A
physical id: 2
slot: N/A
Modération : merci d'utiliser les balises code (explications ici).
Dernière modification par cqfd93 (Le 26/10/2018, à 14:41)
Hors ligne
#16 Le 26/10/2018, à 14:43
- malbo
Re : [résolu] menu gnu grub
Ce serait utile de mettre le texte de ton post #15 entre balises comme expliqué dans ce post : https://forum.ubuntu-fr.org/viewtopic.p … #p21963838
Maintenant j'y vois plus clair.
La ligne suivante :
product: VGN-Z31MN_B (N/A)
m'indique que le nom complet de ton modèle est VGN-Z31MN_B et il est décrit sur cette page de la fnac : https://www.fnac.com/Sony-Vaio-VGN-Z31M … 535940/w-4
Il y est mentionné que Windows Vista était préinstallé, ce qui confirme tes dires.
Il faut à présent que je cherche de la doc sur ce modèle.
Dernière modification par malbo (Le 26/10/2018, à 14:46)
Hors ligne
#17 Le 26/10/2018, à 15:17
- seramik
Re : [résolu] menu gnu grub
pour vista c'était facile, y'avait l'autocollant
pour le nom du modèle complet j'ai juste lu le stickers au dos de la machine
milles excuses.
merci pour les balises, je suis en train de lire le reste du post sur lequel j'apprend aussi les raccourcis pour copier coller y compris dans le terminal
Hors ligne
#18 Le 26/10/2018, à 18:34
- malbo
Re : [résolu] menu gnu grub
Si tu as le courage de le faire, il est possible de démarrer sur ton Ubuntu installé en utilisant Super Grub2 Disk. Le plus simple est de graver un CD (ou un CD réinscriptible) à partir de l'ISO super_grub2_disk_hybrid_2.02s9.iso à télécharger à cette adresse : https://sourceforge.net/projects/superg … edomCookie. En solution alternative, tu peux réaliser une LiveUSB Super Grub2 Disk en suivant mon tuto : https://forum.ubuntu-fr.org/viewtopic.php?id=2017140
C'est un tuto pour réaliser la LiveUSB depuis Windows. Si tu n'as pas de Windows sous la main, c'est dommage parce que je n'ai pas de tuto pour faire ça depuis Linux.
Dernière modification par malbo (Le 26/10/2018, à 18:36)
Hors ligne
#19 Le 26/10/2018, à 18:39
- seramik
Re : [résolu] menu gnu grub
ok j'ai fait une live clé usb avec SG2D
ça demarre bien dessus,
j'arrive à un menu orange avec plein de fonctionnalités
mais quel est l'bjestf final de la manoeuvre ?
je dois aller vers quoi ensuite ?
Dernière modification par seramik (Le 26/10/2018, à 18:57)
Hors ligne
#20 Le 26/10/2018, à 18:53
- malbo
Re : [résolu] menu gnu grub
Après, tu fais un Boot-Info depuis la session de Ubuntu démarrée en passant par SG2D et tu donnes l'URL de ce Boot-Info dans ta réponse afin qu'on puisse contrôler ce qui se passe. Je te donnerai des instructions après examen du Boot-Info.
Hors ligne
#21 Le 26/10/2018, à 18:59
- lucmars
Re : [résolu] menu gnu grub
Salut,
Je ne sais pas si ça peut aider lucmars à t'aider, mais j'ai trouvé ceci : https://marcin.juszkiewicz.com.pl/2016/ … parameter/
Je ne sais si cela aidera.
Donc si super-grub n'y peut rien, tentes en mode live cette commande
sudo efibootmgr -t 5
puis démarre ton pc, avec un peu de chance t'auras quelque chose de plus à grailler que no operating system.
Le dernier recours sera boot-repair qui propose de réinstaller les fichiers .efi
Gaulois Matter !
Hors ligne
#22 Le 26/10/2018, à 19:03
- seramik
Re : [résolu] menu gnu grub
j'ai pas dit que SG2D ne pouvait rien
je dis juste que je suis paumé dans la foultitude de lignes du menu de SGD2 et que je ne sais laquelle choisir
Hors ligne
#23 Le 26/10/2018, à 19:07
- seramik
Re : [résolu] menu gnu grub
au menu j'ai le choix entre :
detect and show boot methods
enable GRUB2's RIAD and LVM support
Enable all native disk drivers *experimental*
boot manually...
etra GRUB2 functionnality...
print devices/partitions
color ON/OFF
exit...
et a chaque fois qu'il y a trois petits point on accède à un sous menu
donc par dépit j'ai tenté la première ligne et la premiere ligne du sous menu
et là miracle, ça a démarré sur le ubuntu du disque dur
alors je me remet sur le tuto du bootinfo pour me remémorer comment faire
je veux relancer mon boot info et là vlà t'y pas qu'il me demande un code ?
un code, alors qu'à l'installation de ubuntu , j'avais expressément demandé de ne pas mettre de code, histoire de clavier en querty...)
bref ça merdouille
Dernière modification par seramik (Le 26/10/2018, à 19:52)
Hors ligne
#24 Le 26/10/2018, à 19:40
- malbo
Re : [résolu] menu gnu grub
je veux relancer mon boot info et là vlà t'y pas qu'il me demande un code ?
En principe, après la commande qui commence par "sudo", c'est ton mot de passe qui est demandé. Il faut taper ce mot de passe en aveugle (rien n’indique que tu le tapes dans le terminal mais c'est voulu) et valider par la touche Entrée.
Cela n'a rien à voir avec ce que tu as défini à l'installation : tu as seulement choisi que ton mot de passe ne soit pas demandé à l'ouverture de session. C'est seulement à l'ouverture de session qu'il n'est pas demandé mais ça ne veut pas dire qu'il ne sera jamais demandé...
Hors ligne
#25 Le 26/10/2018, à 19:49
- lucmars
Re : [résolu] menu gnu grub
@seramik
Je parlais des capacités de super-grub, apparemment il boote ton buntu installé, c'est déjà cela.
Gaulois Matter !
Hors ligne