#1 Le 07/05/2018, à 08:24
- wysiwyg31
Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
Bonjour tout le monde !
Je viens de passer à ubuntu 18.04: il me semblait que le temps de boot était un des chevaux de bataille de cette version, mais je trouve le pc un peu lent à démarrer.
Il s'agit d'un XPS13 ubuntu, fraichement reçu et aussitot upgradé à bionic beaver :-)
voici les infos que j'ai pu glaner:
toto@celestin:~$ systemd-analyze
Startup finished in 8.946s (firmware) + 5.717s (loader) + 34.265s (kernel) + 17.098s (userspace) = 1min 6.026s
graphical.target reached after 1.261s in userspace
toto@celestin:~$ systemd-analyze blame
13.670s apt-daily.service
8.164s fstrim.service
2.444s apt-daily-upgrade.service
929ms bolt.service
.....J'ai testé aussi systemd-analyze plot > bootchart.svg
Ca me donne le détail de la partie "userspace", mais rien sur la partie kernell !
J'ai 2 questions si quelqu'un a des idées ?
- comment puis je améliorer un peu la partie userspace (apt-get update / fstrim.service) ?
- comment avoir le détail du kernell pour voir si quelque chose traine un peu trop là dedans ?
A+
Hors ligne
#2 Le 07/05/2018, à 12:45
- LukePerp
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
Bonjour, avant de bricoler l'amélioration du démarrage de ton système, voyons ensemble pour éviter les mauvaises manips.
En cherchat les specs de ta machine, il semble y avoir un disque SSD. Dans ce cas, 1min de démarrage est clairement long. Sur un système neuf, je pense que 16 secondes est la moyenne pour 18.04.
Peux tu redémarrer ta machine, et immédiatement dès que tu pourras, donnes nous le retour complet de :
dmesgPuis pour avoir plus d'infos :
sudo lshw
sudo apt update
cat /etc/lsb-release
echo $DESKTOP_SESSION
uname -a
sudo systemd-analyze blame
sudo systemd-analyze critical-chainGamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#3 Le 08/05/2018, à 10:38
- wysiwyg31
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
Bonjour !
Alors :-) le post risque d'être long...
dmesg:
[ 0.000000] Linux version 4.15.0-20-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 (Ubuntu 4.15.0-20.21-generic 4.15.17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=f62ee688-4ed2-44f6-a581-37a03d7828f8 ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002d95efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000002d95f000-0x000000002d95ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000002d960000-0x000000002d960fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000002d961000-0x000000003ea15fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003ea16000-0x000000003edd3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003edd4000-0x000000003ee20fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003ee21000-0x000000003f4d8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003f4d9000-0x000000003ff26fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003ff27000-0x000000003fffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x0000000047ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000048000000-0x0000000048dfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000048e00000-0x000000004f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004ae7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x3ede4000 ACPI 2.0=0x3ede4000 SMBIOS=0x3fe08000 SMBIOS 3.0=0x3fe07000 ESRT=0x3fdd9018 MPS=0xfcd40 MEMATTR=0x3bf1b018
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.2.1 02/21/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x4ae800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 0060000000 mask 7FE0000000 uncachable
[ 0.000000] 2 base 0050000000 mask 7FF0000000 uncachable
[ 0.000000] 3 base 004C000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 004B000000 mask 7FFF000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x48e00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd020-0x000fd02f] mapped at [ (ptrval)]
[ 0.000000] esrt: Reserving ESRT space from 0x000000003fdd9018 to 0x000000003fdd9050.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x21df3e000, 0x21df3efff] PGTABLE
[ 0.000000] BRK [0x21df3f000, 0x21df3ffff] PGTABLE
[ 0.000000] BRK [0x21df40000, 0x21df40fff] PGTABLE
[ 0.000000] BRK [0x21df41000, 0x21df41fff] PGTABLE
[ 0.000000] BRK [0x21df42000, 0x21df42fff] PGTABLE
[ 0.000000] BRK [0x21df43000, 0x21df43fff] PGTABLE
[ 0.000000] BRK [0x21df44000, 0x21df44fff] PGTABLE
[ 0.000000] BRK [0x21df45000, 0x21df45fff] PGTABLE
[ 0.000000] BRK [0x21df46000, 0x21df46fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x263c7000-0x298f7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000003EDE4000 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x000000003EDE40B8 0000F4 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000003EE0A860 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000003EDE4240 02661B (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.000000] ACPI: FACS 0x000000003F4D6180 000040
[ 0.000000] ACPI: APIC 0x000000003EE0A970 0000BC (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000003EE0AA30 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000003EE0AA78 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000003EE0AB28 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000003EE0AB68 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x000000003EE0ABA0 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: BOOT 0x000000003EE0AF00 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000003EE0AF28 0012DE (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: HPET 0x000000003EE0C208 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000003EE0C240 000CEF (v02 INTEL xh_rvp07 00000000 INTL 20160422)
[ 0.000000] ACPI: UEFI 0x000000003EE0CF30 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x000000003EE0CF78 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: LPIT 0x000000003EE0E728 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000003EE0E7C0 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000003EE0E928 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000003EE0EBC8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000003EE11BD0 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.000000] ACPI: DBGP 0x000000003EE120E8 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000003EE12120 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000003EE12178 000801 (v02 INTEL UsbCTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000003EE12980 00CFC3 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: NHLT 0x000000003EE1F948 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: ASF! 0x000000003EE1F978 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: DMAR 0x000000003EE1FA18 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.000000] ACPI: BGRT 0x000000003EE1FB08 000038 (v00 \xf3\xee 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000004ae7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x4ae7d5000-0x4ae7fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000004ae7fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000002d95efff]
[ 0.000000] node 0: [mem 0x000000002d961000-0x000000003ea15fff]
[ 0.000000] node 0: [mem 0x000000003ffff000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000048000000-0x0000000048dfffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000004ae7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000004ae7fffff]
[ 0.000000] On node 0 totalpages: 4120498
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 25 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4001 pages used for memmap
[ 0.000000] DMA32 zone: 256021 pages, LIFO batch:31
[ 0.000000] Normal zone: 60320 pages used for memmap
[ 0.000000] Normal zone: 3860480 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 99 pages
[ 0.000000] Reserving Intel graphics memory at 0x000000004b800000-0x000000004f7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x2d95f000-0x2d95ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x2d960000-0x2d960fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3ea16000-0x3edd3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3edd4000-0x3ee20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3ee21000-0x3f4d8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3f4d9000-0x3ff26fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3ff27000-0x3fffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x47ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x48e00000-0x4f7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4f800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x4f800000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4056088
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=f62ee688-4ed2-44f6-a581-37a03d7828f8 ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16026916K/16481992K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 455076K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39065 entries in 153 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] DMAR: Host address width 39
[ 0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.004000] DMAR: RMRR base: 0x0000003eaef000 end: 0x0000003eb0efff
[ 0.004000] DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f7fffff
[ 0.004000] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.004000] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.004000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.004000] x2apic enabled
[ 0.004000] Switched APIC routing to cluster x2apic.
[ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028000] tsc: Detected 2000.000 MHz processor
[ 0.028000] tsc: Detected 1992.000 MHz TSC
[ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3984.00 BogoMIPS (lpj=7968000)
[ 0.028000] pid_max: default: 32768 minimum: 301
[ 0.028000] Security Framework initialized
[ 0.028000] Yama: becoming mindful.
[ 0.028000] AppArmor: AppArmor initialized
[ 0.028000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.032569] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.032612] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.032652] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.032802] CPU: Physical Processor ID: 0
[ 0.032803] CPU: Processor Core ID: 0
[ 0.032807] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.032808] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.032813] mce: CPU supports 10 MCE banks
[ 0.032821] CPU0: Thermal monitoring enabled (TM1)
[ 0.032838] process: using mwait in idle threads
[ 0.032844] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.032844] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.032845] Spectre V2 : Mitigation: Full generic retpoline
[ 0.032845] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.032846] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.032846] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.033175] Freeing SMP alternatives memory: 36K
[ 0.035323] TSC deadline timer enabled
[ 0.035328] smpboot: CPU0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[ 0.035372] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.035394] ... version: 4
[ 0.035394] ... bit width: 48
[ 0.035395] ... generic registers: 4
[ 0.035395] ... value mask: 0000ffffffffffff
[ 0.035396] ... max period: 00007fffffffffff
[ 0.035396] ... fixed-purpose events: 3
[ 0.035396] ... event mask: 000000070000000f
[ 0.035425] Hierarchical SRCU implementation.
[ 0.036000] smp: Bringing up secondary CPUs ...
[ 0.036000] x86: Booting SMP configuration:
[ 0.036000] .... node #0, CPUs: #1
[ 0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.036000] #2 #3 #4 #5 #6 #7
[ 0.036405] smp: Brought up 1 node, 8 CPUs
[ 0.036405] smpboot: Max logical packages: 1
[ 0.036405] smpboot: Total of 8 processors activated (31872.00 BogoMIPS)
[ 0.040494] devtmpfs: initialized
[ 0.040494] x86/mm: Memory block size: 128MB
[ 0.040792] evm: security.selinux
[ 0.040792] evm: security.SMACK64
[ 0.040793] evm: security.SMACK64EXEC
[ 0.040793] evm: security.SMACK64TRANSMUTE
[ 0.040793] evm: security.SMACK64MMAP
[ 0.040794] evm: security.apparmor
[ 0.040794] evm: security.ima
[ 0.040794] evm: security.capability
[ 0.040804] PM: Registering ACPI NVS region [mem 0x2d95f000-0x2d95ffff] (4096 bytes)
[ 0.040804] PM: Registering ACPI NVS region [mem 0x3ee21000-0x3f4d8fff] (7045120 bytes)
[ 0.040804] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.040804] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.040804] pinctrl core: initialized pinctrl subsystem
[ 0.040804] RTC time: 7:42:37, date: 05/07/18
[ 0.040804] NET: Registered protocol family 16
[ 0.040804] audit: initializing netlink subsys (disabled)
[ 0.040804] audit: type=2000 audit(1525678957.040:1): state=initialized audit_enabled=0 res=1
[ 0.040804] cpuidle: using governor ladder
[ 0.040804] cpuidle: using governor menu
[ 0.040804] Simple Boot Flag at 0x47 set to 0x80
[ 0.040804] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.040804] ACPI: bus type PCI registered
[ 0.040804] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.040804] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.040804] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.040804] PCI: Using configuration type 1 for base access
[ 0.040863] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.040863] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.040863] ACPI: Added _OSI(Module Device)
[ 0.040863] ACPI: Added _OSI(Processor Device)
[ 0.040863] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.040863] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.045639] ACPI Error: [_SB_.PCI0.RP05.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170831/dswload2-191)
[ 0.045661] No Local Variables are initialized for Method [PXSX]
[ 0.045662] No Arguments are initialized for method [PXSX]
[ 0.045663] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170831/psobject-252)
[ 0.045665] ACPI Error: Method parse/execution failed \_SB.PCI0.RP04.PXSX, AE_NOT_FOUND (20170831/psparse-550)
[ 0.046011] ACPI Error: [_SB_.PCI0.RP09.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170831/dswload2-191)
[ 0.046015] No Local Variables are initialized for Method [PXSX]
[ 0.046015] No Arguments are initialized for method [PXSX]
[ 0.046016] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170831/psobject-252)
[ 0.046018] ACPI Error: Method parse/execution failed \_SB.PCI0.RP08.PXSX, AE_NOT_FOUND (20170831/psparse-550)
[ 0.047265] ACPI: Executed 49 blocks of module-level executable AML code
[ 0.124469] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.134187] ACPI: Dynamic OEM Table Load:
[ 0.134196] ACPI: SSDT 0xFFFF99715BA43000 0005CD (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.134598] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.134751] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[ 0.136534] ACPI: Dynamic OEM Table Load:
[ 0.136541] ACPI: SSDT 0xFFFF99715BB49400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.136906] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.137203] ACPI: Dynamic OEM Table Load:
[ 0.137209] ACPI: SSDT 0xFFFF99715BB5DB40 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
[ 0.137525] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.137774] ACPI: Dynamic OEM Table Load:
[ 0.137780] ACPI: SSDT 0xFFFF99715BA44800 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422)
[ 0.138092] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.139003] ACPI: Dynamic OEM Table Load:
[ 0.139014] ACPI: SSDT 0xFFFF99715DD47000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.140494] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.140805] ACPI: Dynamic OEM Table Load:
[ 0.140811] ACPI: SSDT 0xFFFF99715BB4F000 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.141256] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.141574] ACPI: Dynamic OEM Table Load:
[ 0.141580] ACPI: SSDT 0xFFFF99715BB4DC00 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.142030] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.146002] ACPI: EC: EC started
[ 0.146002] ACPI: EC: interrupt blocked
[ 0.154781] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.154782] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.154784] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[ 0.154784] ACPI: Interpreter enabled
[ 0.154825] ACPI: (supports S0 S3 S4 S5)
[ 0.154825] ACPI: Using IOAPIC for interrupt routing
[ 0.154862] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.155465] ACPI: GPE 0x42 active on init
[ 0.155480] ACPI: GPE 0x61 active on init
[ 0.155508] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.197430] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.197435] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.197747] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
[ 0.198044] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
[ 0.198045] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.198724] PCI host bridge to bus 0000:00
[ 0.198726] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.198727] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.198728] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.198729] pci_bus 0000:00: root bus resource [mem 0x4f800000-0xdfffffff window]
[ 0.198730] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.198731] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.198738] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
[ 0.198841] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
[ 0.198850] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[ 0.198855] pci 0000:00:02.0: reg 0x18: [mem 0x50000000-0x5fffffff 64bit pref]
[ 0.198859] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.198870] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.198980] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.198991] pci 0000:00:04.0: reg 0x10: [mem 0xdc420000-0xdc427fff 64bit]
[ 0.199173] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.199192] pci 0000:00:14.0: reg 0x10: [mem 0xdc410000-0xdc41ffff 64bit]
[ 0.199249] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.199415] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.199434] pci 0000:00:14.2: reg 0x10: [mem 0xdc434000-0xdc434fff 64bit]
[ 0.199638] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.199723] pci 0000:00:15.0: reg 0x10: [mem 0xdc433000-0xdc433fff 64bit]
[ 0.199953] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.200034] pci 0000:00:15.1: reg 0x10: [mem 0xdc432000-0xdc432fff 64bit]
[ 0.200289] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.200304] pci 0000:00:16.0: reg 0x10: [mem 0xdc431000-0xdc431fff 64bit]
[ 0.200349] pci 0000:00:16.0: PME# supported from D3hot
[ 0.200503] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.200568] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.200711] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
[ 0.200775] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.200918] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.200974] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.201121] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[ 0.201177] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.201343] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[ 0.201511] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.201523] pci 0000:00:1f.2: reg 0x10: [mem 0xdc42c000-0xdc42ffff]
[ 0.201665] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
[ 0.201688] pci 0000:00:1f.3: reg 0x10: [mem 0xdc428000-0xdc42bfff 64bit]
[ 0.201711] pci 0000:00:1f.3: reg 0x20: [mem 0xdc400000-0xdc40ffff 64bit]
[ 0.201752] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.201935] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.201995] pci 0000:00:1f.4: reg 0x10: [mem 0xdc430000-0xdc4300ff 64bit]
[ 0.202066] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.202432] pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000
[ 0.202464] pci 0000:01:00.0: reg 0x14: [mem 0xdc300000-0xdc300fff]
[ 0.202570] pci 0000:01:00.0: supports D1 D2
[ 0.202571] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.212151] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.212156] pci 0000:00:1c.0: bridge window [mem 0xdc300000-0xdc3fffff]
[ 0.212696] pci 0000:02:00.0: [168c:003e] type 00 class 0x028000
[ 0.213026] pci 0000:02:00.0: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit]
[ 0.214226] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.224274] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.224280] pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.224422] pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400
[ 0.224483] pci 0000:03:00.0: enabling Extended Tags
[ 0.224567] pci 0000:03:00.0: supports D1 D2
[ 0.224569] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.224674] pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
[ 0.224679] pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff]
[ 0.224685] pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.224783] pci 0000:04:00.0: [8086:15d3] type 01 class 0x060400
[ 0.224847] pci 0000:04:00.0: enabling Extended Tags
[ 0.224934] pci 0000:04:00.0: supports D1 D2
[ 0.224936] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.225032] pci 0000:04:01.0: [8086:15d3] type 01 class 0x060400
[ 0.225096] pci 0000:04:01.0: enabling Extended Tags
[ 0.225181] pci 0000:04:01.0: supports D1 D2
[ 0.225183] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.225275] pci 0000:04:02.0: [8086:15d3] type 01 class 0x060400
[ 0.225339] pci 0000:04:02.0: enabling Extended Tags
[ 0.225424] pci 0000:04:02.0: supports D1 D2
[ 0.225426] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.225522] pci 0000:04:04.0: [8086:15d3] type 01 class 0x060400
[ 0.225585] pci 0000:04:04.0: enabling Extended Tags
[ 0.225670] pci 0000:04:04.0: supports D1 D2
[ 0.225672] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.225779] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 0.225788] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 0.225795] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.225844] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.225854] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 0.225910] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 0.225919] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 0.225926] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 0.225987] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 0.225997] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 0.226051] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 0.226061] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 0.226068] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 0.226218] pci 0000:6e:00.0: [1179:0116] type 00 class 0x010802
[ 0.226251] pci 0000:6e:00.0: reg 0x10: [mem 0xdc200000-0xdc203fff 64bit]
[ 0.236027] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[ 0.236033] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.239102] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.239195] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.239286] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.239375] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.239465] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.239554] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.239643] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.239732] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.249965] ACPI Error: [^^PCI0.RP05.PXSX.WIST] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 0.249972] No Local Variables are initialized for Method [_DSM]
[ 0.249973] Initialized Arguments for Method [_DSM]: (4 arguments defined for method invocation)
[ 0.249974] Arg0: 0000000009501c30 <Obj> Buffer(16) A0 40 EB C4 D2 6C E2 11
[ 0.249981] Arg1: 00000000d313a703 <Obj> Integer 0000000000000001
[ 0.249984] Arg2: 00000000f87d1751 <Obj> Integer 0000000000000001
[ 0.249987] Arg3: 00000000a17a34cb <Obj> Package 00000000a17a34cb
[ 0.249991] ACPI Error: Method parse/execution failed \_SB.PEPD._DSM, AE_NOT_FOUND (20170831/psparse-550)
[ 0.255901] ACPI: EC: interrupt unblocked
[ 0.255907] ACPI: EC: event unblocked
[ 0.255924] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.255926] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[ 0.256627] SCSI subsystem initialized
[ 0.256638] libata version 3.00 loaded.
[ 0.256638] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.256638] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.256638] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.256638] vgaarb: loaded
[ 0.256638] ACPI: bus type USB registered
[ 0.256638] usbcore: registered new interface driver usbfs
[ 0.256638] usbcore: registered new interface driver hub
[ 0.256638] usbcore: registered new device driver usb
[ 0.256638] EDAC MC: Ver: 3.0.0
[ 0.256638] Registered efivars operations
[ 0.291396] PCI: Using ACPI for IRQ routing
[ 0.312771] PCI: pci_cache_line_size set to 64 bytes
[ 0.313396] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.313396] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.313397] e820: reserve RAM buffer [mem 0x2d95f000-0x2fffffff]
[ 0.313398] e820: reserve RAM buffer [mem 0x3ea16000-0x3fffffff]
[ 0.313398] e820: reserve RAM buffer [mem 0x48e00000-0x4bffffff]
[ 0.313399] e820: reserve RAM buffer [mem 0x4ae800000-0x4afffffff]
[ 0.313457] NetLabel: Initializing
[ 0.313458] NetLabel: domain hash size = 128
[ 0.313458] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.313467] NetLabel: unlabeled traffic allowed by default
[ 0.313475] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.313475] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.314105] clocksource: Switched to clocksource hpet
[ 0.319576] VFS: Disk quotas dquot_6.6.0
[ 0.319585] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.319657] AppArmor: AppArmor Filesystem Enabled
[ 0.319668] pnp: PnP ACPI init
[ 0.319867] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.319869] system 00:00: [io 0xffff] has been reserved
[ 0.319869] system 00:00: [io 0xffff] has been reserved
[ 0.319870] system 00:00: [io 0xffff] has been reserved
[ 0.319871] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.319872] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.319876] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.319954] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.319981] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.319983] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.320106] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.320118] pnp 00:04: Plug and Play ACPI device, IDs DLL07e6 PNP0f13 (active)
[ 0.320306] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.320307] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.320308] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.320309] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.320310] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.320311] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.320312] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.320313] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.320314] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.320315] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.320318] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.320348] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.320349] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.320350] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.320352] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.320352] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.320353] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.320354] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.320357] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.320596] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.320598] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.321534] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.321535] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.321537] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.325458] pnp: PnP ACPI: found 9 devices
[ 0.333011] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.333039] pci 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 0.333047] pci 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 0.333048] pci 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 0.333056] pci 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 0.333064] pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 0.333069] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03-6d] add_size 3000
[ 0.333076] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x4fff]
[ 0.333078] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.333081] pci 0000:00:1c.0: bridge window [mem 0xdc300000-0xdc3fffff]
[ 0.333086] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.333089] pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.333094] pci 0000:03:00.0: BAR 13: assigned [io 0x2000-0x4fff]
[ 0.333098] pci 0000:04:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.333099] pci 0000:04:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.333100] pci 0000:04:01.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.333101] pci 0000:04:02.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.333102] pci 0000:04:04.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.333104] pci 0000:04:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.333105] pci 0000:04:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.333106] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.333110] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 0.333117] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 0.333119] pci 0000:04:01.0: bridge window [io 0x2000-0x2fff]
[ 0.333123] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 0.333126] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 0.333132] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 0.333133] pci 0000:04:02.0: bridge window [io 0x3000-0x3fff]
[ 0.333138] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 0.333145] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 0.333147] pci 0000:04:04.0: bridge window [io 0x4000-0x4fff]
[ 0.333151] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 0.333154] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 0.333159] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 0.333161] pci 0000:03:00.0: bridge window [io 0x2000-0x4fff]
[ 0.333165] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 0.333168] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.333173] pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
[ 0.333174] pci 0000:00:1c.4: bridge window [io 0x2000-0x4fff]
[ 0.333177] pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff]
[ 0.333179] pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.333183] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[ 0.333185] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.333190] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.333191] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.333192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.333193] pci_bus 0000:00: resource 7 [mem 0x4f800000-0xdfffffff window]
[ 0.333194] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.333195] pci_bus 0000:01: resource 1 [mem 0xdc300000-0xdc3fffff]
[ 0.333196] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdc1fffff]
[ 0.333197] pci_bus 0000:03: resource 0 [io 0x2000-0x4fff]
[ 0.333197] pci_bus 0000:03: resource 1 [mem 0xac000000-0xda0fffff]
[ 0.333198] pci_bus 0000:03: resource 2 [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.333199] pci_bus 0000:04: resource 0 [io 0x2000-0x4fff]
[ 0.333200] pci_bus 0000:04: resource 1 [mem 0xac000000-0xda0fffff]
[ 0.333201] pci_bus 0000:04: resource 2 [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.333201] pci_bus 0000:05: resource 1 [mem 0xda000000-0xda0fffff]
[ 0.333202] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.333203] pci_bus 0000:06: resource 1 [mem 0xac000000-0xc3efffff]
[ 0.333204] pci_bus 0000:06: resource 2 [mem 0x60000000-0x7fffffff 64bit pref]
[ 0.333205] pci_bus 0000:39: resource 0 [io 0x3000-0x3fff]
[ 0.333206] pci_bus 0000:39: resource 1 [mem 0xc3f00000-0xc3ffffff]
[ 0.333206] pci_bus 0000:3a: resource 0 [io 0x4000-0x4fff]
[ 0.333207] pci_bus 0000:3a: resource 1 [mem 0xc4000000-0xd9ffffff]
[ 0.333208] pci_bus 0000:3a: resource 2 [mem 0x80000000-0xa9ffffff 64bit pref]
[ 0.333209] pci_bus 0000:6e: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.333325] NET: Registered protocol family 2
[ 0.333462] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.333616] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.333757] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.333784] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.333842] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.333900] NET: Registered protocol family 1
[ 0.333908] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.334871] PCI: CLS 128 bytes, default 64
[ 0.334892] Unpacking initramfs...
[ 0.883552] Freeing initrd memory: 54468K
[ 0.883618] DMAR: ACPI device "device:75" under DMAR at fed91000 as 00:15.0
[ 0.883621] DMAR: ACPI device "device:76" under DMAR at fed91000 as 00:15.1
[ 0.883636] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.883638] software IO TLB [mem 0x3690a000-0x3a90a000] (64MB) mapped at [00000000144d773e-00000000143b5f3f]
[ 0.883907] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
[ 0.884164] Scanning for low memory corruption every 60 seconds
[ 0.884710] Initialise system trusted keyrings
[ 0.884718] Key type blacklist registered
[ 0.884783] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.885448] zbud: loaded
[ 0.885777] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.885904] fuse init (API version 7.26)
[ 0.888198] Key type asymmetric registered
[ 0.888198] Asymmetric key parser 'x509' registered
[ 0.888216] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.888270] io scheduler noop registered
[ 0.888270] io scheduler deadline registered
[ 0.888294] io scheduler cfq registered (default)
[ 0.889008] pcieport 0000:03:00.0: enabling device (0006 -> 0007)
[ 0.889314] pcieport 0000:04:01.0: enabling device (0006 -> 0007)
[ 0.889461] pcieport 0000:04:02.0: enabling device (0006 -> 0007)
[ 0.889609] pcieport 0000:04:04.0: enabling device (0006 -> 0007)
[ 0.889790] efifb: probing for efifb
[ 0.889799] efifb: framebuffer at 0x50000000, using 8128k, total 8128k
[ 0.889800] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.889800] efifb: scrolling: redraw
[ 0.889801] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.889882] Console: switching to colour frame buffer device 240x67
[ 0.889898] fb0: EFI VGA frame buffer device
[ 0.889903] intel_idle: MWAIT substates: 0x11142120
[ 0.889904] intel_idle: v0.4.1 model 0x8E
[ 0.890261] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.891140] ACPI: AC Adapter [AC] (on-line)
[ 0.891184] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.891233] ACPI: Lid Switch [LID0]
[ 0.891251] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.891294] ACPI: Power Button [PBTN]
[ 0.891311] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.891317] ACPI: Sleep Button [SBTN]
[ 0.891335] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.891377] ACPI: Power Button [PWRF]
[ 0.893409] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.893930] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.893931] ACPI: Thermal Zone [THM] (25 C)
[ 0.894065] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.897331] Linux agpgart interface v0.103
[ 0.899906] loop: module loaded
[ 0.900073] libphy: Fixed MDIO Bus: probed
[ 0.900074] tun: Universal TUN/TAP device driver, 1.6
[ 0.900138] PPP generic driver version 2.4.2
[ 0.900230] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.900231] ehci-pci: EHCI PCI platform driver
[ 0.900238] ehci-platform: EHCI generic platform driver
[ 0.900247] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.900248] ohci-pci: OHCI PCI platform driver
[ 0.900254] ohci-platform: OHCI generic platform driver
[ 0.900259] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.900838] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.900842] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.902027] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.902031] xhci_hcd 0000:00:14.0: cache line size of 128 is not supported
[ 0.902290] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.902291] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.902292] usb usb1: Product: xHCI Host Controller
[ 0.902293] usb usb1: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[ 0.902294] usb usb1: SerialNumber: 0000:00:14.0
[ 0.902437] hub 1-0:1.0: USB hub found
[ 0.902464] hub 1-0:1.0: 12 ports detected
[ 0.906554] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.906559] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.906600] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.906601] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.906602] usb usb2: Product: xHCI Host Controller
[ 0.906603] usb usb2: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[ 0.906604] usb usb2: SerialNumber: 0000:00:14.0
[ 0.906742] hub 2-0:1.0: USB hub found
[ 0.906761] hub 2-0:1.0: 6 ports detected
[ 0.907603] usb: port power management may be unreliable
[ 0.910146] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.910825] i8042: Warning: Keylock active
[ 0.913467] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.913469] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.913775] mousedev: PS/2 mouse device common for all mice
[ 0.914332] rtc_cmos 00:01: RTC can wake from S4
[ 0.914886] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.914979] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.914983] i2c /dev entries driver
[ 0.915012] device-mapper: uevent: version 1.0.3
[ 0.915132] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.915135] intel_pstate: Intel P-state driver initializing
[ 0.915983] intel_pstate: HWP enabled
[ 0.916053] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.917645] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.917647] EFI Variables Facility v0.08 2004-May-17
[ 0.960140] intel_pmc_core: initialized
[ 0.960280] NET: Registered protocol family 10
[ 0.962287] ACPI: Battery Slot [BAT0] (battery present)
[ 0.964078] Segment Routing with IPv6
[ 0.964090] NET: Registered protocol family 17
[ 0.964245] Key type dns_resolver registered
[ 0.965052] RAS: Correctable Errors collector initialized.
[ 0.965119] microcode: sig=0x806ea, pf=0x80, revision=0x84
[ 0.965359] microcode: Microcode Update Driver: v2.2.
[ 0.965376] sched_clock: Marking stable (965356360, 0)->(1060431005, -95074645)
[ 0.965721] registered taskstats version 1
[ 0.965728] Loading compiled-in X.509 certificates
[ 0.967273] Loaded X.509 cert 'Build time autogenerated kernel key: f4ad6a5babf67650e4ceb385fa5dda8e4a178208'
[ 0.968437] Loaded UEFI:db cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7' linked to secondary sys keyring
[ 0.968452] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[ 0.968467] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[ 0.971075] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[ 0.971998] zswap: loaded using pool lzo/zbud
[ 0.974835] Key type big_key registered
[ 0.974836] Key type trusted registered
[ 0.975906] Key type encrypted registered
[ 0.975907] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.975909] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.975919] evm: HMAC attrs: 0x1
[ 0.977256] Magic number: 2:942:722
[ 0.977262] block loop2: hash matches
[ 0.977466] rtc_cmos 00:01: setting system clock to 2018-05-07 07:42:38 UTC (1525678958)
[ 0.977566] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.977566] EDD information not available.
[ 0.979084] Freeing unused kernel memory: 2404K
[ 0.979085] Write protecting the kernel read-only data: 20480k
[ 0.979515] Freeing unused kernel memory: 2008K
[ 0.981758] Freeing unused kernel memory: 1904K
[ 0.985438] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.985438] x86/mm: Checking user space page tables
[ 0.989042] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.048701] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.050188] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[ 1.055828] nvme nvme0: pci function 0000:6e:00.0
[ 1.080181] [drm] Memory usable by graphics device = 4096M
[ 1.080184] checking generic (50000000 7f0000) vs hw (50000000 10000000)
[ 1.080185] fb: switching to inteldrmfb from EFI VGA
[ 1.080209] Console: switching to colour dummy device 80x25
[ 1.080431] [drm] Replacing VGA console driver
[ 1.086245] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.086245] [drm] Driver supports precise vblank timestamp query.
[ 1.088422] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.088976] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[ 1.097719] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 1.104216] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.106106] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 1.148611] fbcon: inteldrmfb (fb0) is primary device
[ 1.148657] Console: switching to colour frame buffer device 240x67
[ 1.148687] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.244071] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 1.282291] nvme0n1: p1 p2 p3 p4 p5
[ 1.439735] usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4
[ 1.439736] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.439737] usb 1-5: Product: Integrated_Webcam_HD
[ 1.439738] usb 1-5: Manufacturer: Integrated_Webcam_HD
[ 1.439739] usb 1-5: SerialNumber: 200901010001
[ 1.568226] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 1.717000] usb 1-7: New USB device found, idVendor=0489, idProduct=e0a2
[ 1.717001] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.846563] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734]
[ 1.875095] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..]
[ 1.875098] psmouse serio1: synaptics: Your touchpad (PNP: DLL07e6 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 1.884435] clocksource: Switched to clocksource tsc
[ 1.932429] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00323/0x840300/0x12e800/0x0, board id: 3038, fw id: 2375007
[ 1.969031] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.512006] raid6: sse2x1 gen() 13903 MB/s
[ 2.560003] raid6: sse2x1 xor() 10137 MB/s
[ 2.608005] raid6: sse2x2 gen() 17419 MB/s
[ 2.656004] raid6: sse2x2 xor() 11664 MB/s
[ 2.704004] raid6: sse2x4 gen() 20088 MB/s
[ 2.748386] [drm] RC6 on
[ 2.752004] raid6: sse2x4 xor() 11996 MB/s
[ 2.777048] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 2.777048] CPU4: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 2.777049] CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 2.777050] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 2.777052] CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 2.777079] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 2.777083] CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 2.777083] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 2.777084] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 2.777085] CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 2.778062] CPU0: Core temperature/speed normal
[ 2.778062] CPU0: Package temperature/speed normal
[ 2.778063] CPU4: Core temperature/speed normal
[ 2.778063] CPU4: Package temperature/speed normal
[ 2.778099] CPU1: Package temperature/speed normal
[ 2.778100] CPU2: Package temperature/speed normal
[ 2.778101] CPU5: Package temperature/speed normal
[ 2.778101] CPU6: Package temperature/speed normal
[ 2.778102] CPU7: Package temperature/speed normal
[ 2.778103] CPU3: Package temperature/speed normal
[ 2.800004] raid6: avx2x1 gen() 27859 MB/s
[ 2.848003] raid6: avx2x1 xor() 18874 MB/s
[ 2.896004] raid6: avx2x2 gen() 33699 MB/s
[ 2.944003] raid6: avx2x2 xor() 20868 MB/s
[ 2.992002] raid6: avx2x4 gen() 37949 MB/s
[ 3.040003] raid6: avx2x4 xor() 23351 MB/s
[ 3.040004] raid6: using algorithm avx2x4 gen() 37949 MB/s
[ 3.040004] raid6: .... xor() 23351 MB/s, rmw enabled
[ 3.040005] raid6: using avx2x2 recovery algorithm
[ 3.041991] xor: automatically using best checksumming function avx
[ 3.052422] Btrfs loaded, crc32c=crc32c-intel
[ 5.125485] pcieport 0000:04:00.0: Refused to change power state, currently in D3
[ 5.126830] pci_bus 0000:05: busn_res: [bus 05] is released
[ 5.126929] pci_bus 0000:06: busn_res: [bus 06-38] is released
[ 5.126980] pci_bus 0000:39: busn_res: [bus 39] is released
[ 5.127103] pci_bus 0000:3a: busn_res: [bus 3a-6d] is released
[ 5.127137] pci_bus 0000:04: busn_res: [bus 04-6d] is released
[ 34.199911] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
[ 34.283422] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 34.369798] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 34.388567] systemd[1]: Detected architecture x86-64.
[ 34.390627] systemd[1]: Set hostname to <celestin>.
[ 34.403350] random: crng init done
[ 34.450067] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 34.450084] systemd[1]: Reached target User and Group Name Lookups.
[ 34.450217] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 34.450224] systemd[1]: Reached target Swap.
[ 34.450316] systemd[1]: Created slice User and Session Slice.
[ 34.450379] systemd[1]: Created slice System Slice.
[ 34.450413] systemd[1]: Listening on udev Kernel Socket.
[ 34.461638] EXT4-fs (nvme0n1p3): re-mounted. Opts: errors=remount-ro
[ 34.464676] lp: driver loaded but no devices found
[ 34.467309] RPC: Registered named UNIX socket transport module.
[ 34.467310] RPC: Registered udp transport module.
[ 34.467311] RPC: Registered tcp transport module.
[ 34.467311] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 34.467772] ppdev: user-space parallel port driver
[ 34.486897] systemd-journald[442]: Received request to flush runtime journal from PID 1
[ 34.579887] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 34.580823] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 34.604471] input: Intel HID events as /devices/platform/INT33D5:00/input/input8
[ 34.605226] intel-hid INT33D5:00: platform supports 5 button array
[ 34.605248] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input9
[ 34.613425] media: Linux media interface: v0.10
[ 34.617447] Linux video capture interface: v2.00
[ 34.620338] Bluetooth: Core ver 2.22
[ 34.620348] NET: Registered protocol family 31
[ 34.620349] Bluetooth: HCI device and connection manager initialized
[ 34.620351] Bluetooth: HCI socket layer initialized
[ 34.620353] Bluetooth: L2CAP socket layer initialized
[ 34.620357] Bluetooth: SCO socket layer initialized
[ 34.623726] usbcore: registered new interface driver btusb
[ 34.624859] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:58f4)
[ 34.626878] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 34.626879] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
[ 34.626880] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 34.626881] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 34.626918] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input10
[ 34.627449] uvcvideo: Unknown video format 00000032-0002-0010-8000-00aa00389b71
[ 34.627453] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:58f4)
[ 34.629320] uvcvideo: Unable to create debugfs 1-2 directory.
[ 34.629352] uvcvideo 1-5:1.2: Entity type for entity Extension 10 was not initialized!
[ 34.629353] uvcvideo 1-5:1.2: Entity type for entity Extension 12 was not initialized!
[ 34.629354] uvcvideo 1-5:1.2: Entity type for entity Processing 9 was not initialized!
[ 34.629355] uvcvideo 1-5:1.2: Entity type for entity Camera 11 was not initialized!
[ 34.629392] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input11
[ 34.629424] usbcore: registered new interface driver uvcvideo
[ 34.629424] USB Video Class driver (1.1.1)
[ 34.657317] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input12
[ 34.660536] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 34.663563] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 34.698113] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 34.698114] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 34.698114] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 34.698115] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 34.698115] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 34.698115] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 34.703504] AVX2 version of gcm_enc/dec engaged.
[ 34.703505] AES CTR mode by8 optimization enabled
[ 34.725601] intel_rapl: Found RAPL domain package
[ 34.725602] intel_rapl: Found RAPL domain core
[ 34.725603] intel_rapl: Found RAPL domain uncore
[ 34.725604] intel_rapl: Found RAPL domain dram
[ 34.784713] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 34.784921] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 34.809921] i2c_hid i2c-DELL07E6:00: i2c-DELL07E6:00 supply vdd not found, using dummy regulator
[ 34.841701] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 34.841750] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 34.854053] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 34.854307] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 34.854766] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 34.854767] cfg80211: failed to load regulatory.db
[ 34.856765] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 34.856960] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 34.909979] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 34.912994] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 34.915060] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 34.915472] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3271: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 34.915474] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 34.915475] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 34.915476] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 34.915477] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 34.915479] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 34.915480] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1b
[ 34.915481] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 34.941345] input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DELL07E6:00/0018:06CB:76AF.0001/input/input14
[ 34.941413] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
[ 34.965781] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null)
[ 34.979850] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 34.979894] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 34.979926] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 34.979956] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 34.979994] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 34.980042] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 35.001337] audit: type=1400 audit(1525678992.518:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=869 comm="apparmor_parser"
[ 35.001620] audit: type=1400 audit(1525678992.518:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=868 comm="apparmor_parser"
[ 35.001622] audit: type=1400 audit(1525678992.518:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=868 comm="apparmor_parser"
[ 35.001624] audit: type=1400 audit(1525678992.518:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=868 comm="apparmor_parser"
[ 35.001733] audit: type=1400 audit(1525678992.518:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=870 comm="apparmor_parser"
[ 35.002232] audit: type=1400 audit(1525678992.518:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=873 comm="apparmor_parser"
[ 35.002649] audit: type=1400 audit(1525678992.518:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=871 comm="apparmor_parser"
[ 35.002651] audit: type=1400 audit(1525678992.518:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=871 comm="apparmor_parser"
[ 35.002731] audit: type=1400 audit(1525678992.518:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=865 comm="apparmor_parser"
[ 35.002733] audit: type=1400 audit(1525678992.518:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=865 comm="apparmor_parser"
[ 35.212132] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 35.212133] Bluetooth: BNEP filters: protocol multicast
[ 35.212136] Bluetooth: BNEP socket layer initialized
[ 35.213791] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
[ 35.213803] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[ 35.214932] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:143a
[ 35.214934] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[ 35.215309] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00079-QCARMSWPZ-1 api 6 features wowlan,ignore-otp crc32 fd869beb
[ 35.279668] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 07ee144e
[ 35.417088] FS-Cache: Loaded
[ 35.430300] FS-Cache: Netfs 'nfs' registered for caching
[ 35.441668] NFS: Registering the id_resolver key type
[ 35.441675] Key type id_resolver registered
[ 35.441676] Key type id_legacy registered
[ 35.858798] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 35.861981] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 35.862588] ath10k_pci 0000:02:00.0: htt-ver 3.47 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 35.946333] ath: EEPROM regdomain: 0x6c
[ 35.946334] ath: EEPROM indicates we should expect a direct regpair map
[ 35.946336] ath: Country alpha2 being used: 00
[ 35.946336] ath: Regpair used: 0x6c
[ 35.952058] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[ 35.982319] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 36.726216] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 36.729218] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 36.770613] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 36.832192] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 37.260471] Bluetooth: RFCOMM TTY layer initialized
[ 37.260476] Bluetooth: RFCOMM socket layer initialized
[ 37.260480] Bluetooth: RFCOMM ver 1.11
[ 41.705522] wlp2s0: authenticate with 84:a4:23:13:6e:f7
[ 41.753274] wlp2s0: send auth to 84:a4:23:13:6e:f7 (try 1/3)
[ 41.755521] wlp2s0: authenticated
[ 41.756025] wlp2s0: associate with 84:a4:23:13:6e:f7 (try 1/3)
[ 41.758873] wlp2s0: RX AssocResp from 84:a4:23:13:6e:f7 (capab=0x11 status=0 aid=1)
[ 41.761672] wlp2s0: associated
[ 41.780136] ath: EEPROM regdomain: 0x80fa
[ 41.780138] ath: EEPROM indicates we should expect a country code
[ 41.780140] ath: doing EEPROM country->regdmn map search
[ 41.780142] ath: country maps to regdmn code: 0x37
[ 41.780144] ath: Country alpha2 being used: FR
[ 41.780145] ath: Regpair used: 0x37
[ 41.780148] ath: regdomain 0x80fa dynamically updated by country IE
[ 41.780842] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 60.477818] Could not find key with description: [42a2f3ae5728b81a]
[ 60.477821] process_request_key_err: No key
[ 60.477821] Could not find valid key in user session keyring for sig specified in mount option: [42a2f3ae5728b81a]
[ 60.477822] One or more global auth toks could not properly register; rc = [-2]
[ 60.477823] Error parsing options; rc = [-2]
[ 61.939688] rfkill: input handler disabled
[ 62.281133] ACPI Error: [SPRT] Namespace lookup failure, AE_ALREADY_EXISTS (20170831/dswload2-346)
[ 62.281145] No Local Variables are initialized for Method [XTBT]
[ 62.281147] Initialized Arguments for Method [XTBT]: (2 arguments defined for method invocation)
[ 62.281147] Arg0: 000000003d23236b <Obj> Integer 0000000000000005
[ 62.281153] Arg1: 0000000025e51049 <Obj> Integer 0000000002060002
[ 62.281157] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20170831/psobject-252)
[ 62.281161] ACPI Error: Method parse/execution failed \_GPE.XTBT, AE_ALREADY_EXISTS (20170831/psparse-550)
[ 62.281168] ACPI Error: Method parse/execution failed \_GPE.XTBT, AE_ALREADY_EXISTS (20170831/psparse-550)
[ 62.281175] ACPI Error: Method parse/execution failed \_GPE._E42, AE_ALREADY_EXISTS (20170831/psparse-550)
[ 62.281180] ACPI: Marking method _E42 as Serialized because of AE_ALREADY_EXISTS error
[ 62.281184] ACPI Exception: AE_ALREADY_EXISTS, while evaluating GPE method [_E42] (20170831/evgpe-646)
[ 62.424206] pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400
[ 62.424259] pci 0000:03:00.0: enabling Extended Tags
[ 62.424339] pci 0000:03:00.0: supports D1 D2
[ 62.424340] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 62.424656] pci 0000:04:00.0: [8086:15d3] type 01 class 0x060400
[ 62.424913] pci 0000:04:00.0: enabling Extended Tags
[ 62.424989] pci 0000:04:00.0: supports D1 D2
[ 62.424990] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 62.425080] pci 0000:04:01.0: [8086:15d3] type 01 class 0x060400
[ 62.425135] pci 0000:04:01.0: enabling Extended Tags
[ 62.425206] pci 0000:04:01.0: supports D1 D2
[ 62.425207] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 62.425288] pci 0000:04:02.0: [8086:15d3] type 01 class 0x060400
[ 62.425343] pci 0000:04:02.0: enabling Extended Tags
[ 62.425413] pci 0000:04:02.0: supports D1 D2
[ 62.425414] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 62.425494] pci 0000:04:04.0: [8086:15d3] type 01 class 0x060400
[ 62.425549] pci 0000:04:04.0: enabling Extended Tags
[ 62.425619] pci 0000:04:04.0: supports D1 D2
[ 62.425620] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 62.425714] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 62.425723] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 62.425729] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 62.425792] pci 0000:05:00.0: [8086:15d2] type 00 class 0x088000
[ 62.425824] pci 0000:05:00.0: reg 0x10: [mem 0xda000000-0xda03ffff]
[ 62.425836] pci 0000:05:00.0: reg 0x14: [mem 0xda040000-0xda040fff]
[ 62.425895] pci 0000:05:00.0: enabling Extended Tags
[ 62.425990] pci 0000:05:00.0: supports D1 D2
[ 62.425992] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 62.426122] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 62.426131] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 62.426187] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 62.426195] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 62.426201] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 62.426281] pci 0000:39:00.0: [8086:15d4] type 00 class 0x0c0330
[ 62.426317] pci 0000:39:00.0: reg 0x10: [mem 0xc3f00000-0xc3f0ffff]
[ 62.426489] pci 0000:39:00.0: supports D1 D2
[ 62.426490] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 62.426635] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 62.426643] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 62.426691] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 62.426699] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 62.426705] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 62.426733] pci_bus 0000:04: Allocating resources
[ 62.426766] pci 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000
[ 62.426774] pci 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 62.426775] pci 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 62.426783] pci 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[ 62.426791] pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000
[ 62.426794] pci 0000:03:00.0: BAR 13: assigned [io 0x2000-0x4fff]
[ 62.426797] pci 0000:04:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 62.426798] pci 0000:04:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 62.426799] pci 0000:04:01.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 62.426800] pci 0000:04:02.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 62.426801] pci 0000:04:04.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 62.426803] pci 0000:04:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 62.426804] pci 0000:04:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 62.426805] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 62.426809] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 62.426817] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[ 62.426819] pci 0000:04:01.0: bridge window [io 0x2000-0x2fff]
[ 62.426823] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff]
[ 62.426826] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[ 62.426832] pci 0000:04:02.0: PCI bridge to [bus 39]
[ 62.426833] pci 0000:04:02.0: bridge window [io 0x3000-0x3fff]
[ 62.426838] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff]
[ 62.426845] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[ 62.426847] pci 0000:04:04.0: bridge window [io 0x4000-0x4fff]
[ 62.426851] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff]
[ 62.426854] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[ 62.426859] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[ 62.426861] pci 0000:03:00.0: bridge window [io 0x2000-0x4fff]
[ 62.426865] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff]
[ 62.426868] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 62.426904] pcieport 0000:03:00.0: enabling device (0006 -> 0007)
[ 62.427386] pcieport 0000:04:01.0: enabling device (0006 -> 0007)
[ 62.427582] pcieport 0000:04:02.0: enabling device (0006 -> 0007)
[ 62.427775] pcieport 0000:04:04.0: enabling device (0006 -> 0007)
[ 62.428228] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 62.428234] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 62.429383] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x00009810
[ 62.430714] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 62.430715] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 62.430717] usb usb3: Product: xHCI Host Controller
[ 62.430718] usb usb3: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[ 62.430719] usb usb3: SerialNumber: 0000:39:00.0
[ 62.430840] hub 3-0:1.0: USB hub found
[ 62.430848] hub 3-0:1.0: 2 ports detected
[ 62.431298] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 62.431301] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 62.431304] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 62.431333] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 62.431335] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 62.431336] usb usb4: Product: xHCI Host Controller
[ 62.431337] usb usb4: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[ 62.431339] usb usb4: SerialNumber: 0000:39:00.0
[ 62.431438] hub 4-0:1.0: USB hub found
[ 62.431446] hub 4-0:1.0: 2 ports detected
[ 62.433692] thunderbolt 0000:05:00.0: NHI initialized, starting thunderbolt
[ 62.433696] thunderbolt 0000:05:00.0: allocating TX ring 0 of size 10
[ 62.433714] thunderbolt 0000:05:00.0: allocating RX ring 0 of size 10
[ 62.433725] thunderbolt 0000:05:00.0: control channel created
[ 62.433726] thunderbolt 0000:05:00.0: control channel starting...
[ 62.433727] thunderbolt 0000:05:00.0: starting TX ring 0
[ 62.433734] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[ 62.433735] thunderbolt 0000:05:00.0: starting RX ring 0
[ 62.433742] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[ 62.524222] thunderbolt 0000:05:00.0: current switch config:
[ 62.524224] thunderbolt 0000:05:00.0: Switch: 8086:15d3 (Revision: 6, TB Version: 2)
[ 62.524226] thunderbolt 0000:05:00.0: Max Port Number: 11
[ 62.524227] thunderbolt 0000:05:00.0: Config:
[ 62.524229] thunderbolt 0000:05:00.0: Upstream Port Number: 5 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 254ms
[ 62.524230] thunderbolt 0000:05:00.0: unknown1: 0x0 unknown4: 0x0
[ 62.567623] thunderbolt 0000:05:00.0: 0: uid: 0xd49e876cc84e00
[ 62.569162] thunderbolt 0000:05:00.0: Port 0: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[ 62.569163] thunderbolt 0000:05:00.0: Max hop id (in/out): 7/7
[ 62.569164] thunderbolt 0000:05:00.0: Max counters: 8
[ 62.569165] thunderbolt 0000:05:00.0: NFC Credits: 0x800000
[ 62.569674] thunderbolt 0000:05:00.0: Port 1: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[ 62.569676] thunderbolt 0000:05:00.0: Max hop id (in/out): 15/15
[ 62.569676] thunderbolt 0000:05:00.0: Max counters: 16
[ 62.569677] thunderbolt 0000:05:00.0: NFC Credits: 0x3c00000
[ 62.570186] thunderbolt 0000:05:00.0: Port 2: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[ 62.570186] thunderbolt 0000:05:00.0: Max hop id (in/out): 15/15
[ 62.570187] thunderbolt 0000:05:00.0: Max counters: 16
[ 62.570188] thunderbolt 0000:05:00.0: NFC Credits: 0x3c00000
[ 62.570697] thunderbolt 0000:05:00.0: Port 3: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[ 62.570698] thunderbolt 0000:05:00.0: Max hop id (in/out): 15/15
[ 62.570698] thunderbolt 0000:05:00.0: Max counters: 16
[ 62.570699] thunderbolt 0000:05:00.0: NFC Credits: 0x3c00000
[ 62.571214] thunderbolt 0000:05:00.0: Port 4: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[ 62.571215] thunderbolt 0000:05:00.0: Max hop id (in/out): 15/15
[ 62.571216] thunderbolt 0000:05:00.0: Max counters: 16
[ 62.571216] thunderbolt 0000:05:00.0: NFC Credits: 0x3c00000
[ 62.571217] thunderbolt 0000:05:00.0: 0:5: disabled by eeprom
[ 62.571341] thunderbolt 0000:05:00.0: Port 6: 8086:15d3 (Revision: 6, TB Version: 1, Type: PCIe (0x100101))
[ 62.571343] thunderbolt 0000:05:00.0: Max hop id (in/out): 8/8
[ 62.571343] thunderbolt 0000:05:00.0: Max counters: 2
[ 62.571344] thunderbolt 0000:05:00.0: NFC Credits: 0x800000
[ 62.571472] thunderbolt 0000:05:00.0: Port 7: 8086:15d3 (Revision: 6, TB Version: 1, Type: PCIe (0x100101))
[ 62.571473] thunderbolt 0000:05:00.0: Max hop id (in/out): 8/8
[ 62.571474] thunderbolt 0000:05:00.0: Max counters: 2
[ 62.571474] thunderbolt 0000:05:00.0: NFC Credits: 0x800000
[ 62.571593] thunderbolt 0000:05:00.0: Port 8: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
[ 62.571594] thunderbolt 0000:05:00.0: Max hop id (in/out): 9/9
[ 62.571595] thunderbolt 0000:05:00.0: Max counters: 2
[ 62.571596] thunderbolt 0000:05:00.0: NFC Credits: 0x800000
[ 62.571721] thunderbolt 0000:05:00.0: Port 9: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0101))
[ 62.571722] thunderbolt 0000:05:00.0: Max hop id (in/out): 9/9
[ 62.571722] thunderbolt 0000:05:00.0: Max counters: 2
[ 62.571723] thunderbolt 0000:05:00.0: NFC Credits: 0x1000000
[ 62.571849] thunderbolt 0000:05:00.0: Port 10: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0101))
[ 62.571849] thunderbolt 0000:05:00.0: Max hop id (in/out): 9/9
[ 62.571850] thunderbolt 0000:05:00.0: Max counters: 2
[ 62.571851] thunderbolt 0000:05:00.0: NFC Credits: 0x1000000
[ 62.571977] thunderbolt 0000:05:00.0: Port 11: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
[ 62.571977] thunderbolt 0000:05:00.0: Max hop id (in/out): 9/9
[ 62.571978] thunderbolt 0000:05:00.0: Max counters: 2
[ 62.571979] thunderbolt 0000:05:00.0: NFC Credits: 0x800000
[ 67.448249] xhci_hcd 0000:39:00.0: remove, state 4
[ 67.448257] usb usb4: USB disconnect, device number 1
[ 67.448472] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[ 67.448478] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
[ 67.448482] xhci_hcd 0000:39:00.0: remove, state 4
[ 67.448486] usb usb3: USB disconnect, device number 1
[ 67.448690] xhci_hcd 0000:39:00.0: Host halt failed, -19
[ 67.448692] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[ 67.448772] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[ 67.949097] thunderbolt 0000:05:00.0: stopping RX ring 0
[ 67.949110] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 12 (0xffffffff -> 0xffffefff)
[ 67.949130] thunderbolt 0000:05:00.0: stopping TX ring 0
[ 67.949139] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 0 (0xffffffff -> 0xfffffffe)
[ 67.949149] thunderbolt 0000:05:00.0: control channel stopped
[ 67.949283] thunderbolt 0000:05:00.0: freeing RX ring 0
[ 67.949297] thunderbolt 0000:05:00.0: freeing TX ring 0
[ 67.949316] thunderbolt 0000:05:00.0: shutdown
[ 67.992245] pci_bus 0000:04: Allocating resources
[ 67.992296] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 67.992323] pcieport 0000:04:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 67.992325] pcieport 0000:04:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 67.992329] pcieport 0000:04:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 67.992331] pcieport 0000:04:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 72.485499] pci_raw_set_power_state: 20 callbacks suppressed
[ 72.485502] pcieport 0000:04:00.0: Refused to change power state, currently in D3
[ 72.487074] pci_bus 0000:05: busn_res: [bus 05] is released
[ 72.487202] pci_bus 0000:06: busn_res: [bus 06-38] is released
[ 72.487310] pci_bus 0000:39: busn_res: [bus 39] is released
[ 72.487425] pci_bus 0000:3a: busn_res: [bus 3a-6d] is released
[ 72.487517] pci_bus 0000:04: busn_res: [bus 04-6d] is released
[ 2119.508907] wlp2s0: deauthenticating from 84:a4:23:13:6e:f7 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2119.537154] PM: suspend entry (s2idle)
[ 2119.537155] PM: Syncing filesystems ... done.
[ 2119.547711] Freezing user space processes ... (elapsed 0.256 seconds) done.
[ 2119.804229] OOM killer disabled.
[ 2119.804231] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2119.806275] Suspending console(s) (use no_console_suspend to debug)
[ 2120.226473] psmouse serio1: Failed to disable mouse on isa0060/serio1
[13646.540483] ACPI: button: The lid device is not compliant to SW_LID.
[13646.579437] OOM killer enabled.
[13646.579439] Restarting tasks ... done.
[13646.593898] [drm] RC6 on
[13646.836166] PM: suspend exit
[13646.859252] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[13647.622143] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[13647.625232] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[13647.672646] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[13647.737077] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[13652.615109] wlp2s0: authenticate with 84:a4:23:13:6e:f7
[13652.662589] wlp2s0: send auth to 84:a4:23:13:6e:f7 (try 1/3)
[13652.665000] wlp2s0: authenticated
[13652.666712] wlp2s0: associate with 84:a4:23:13:6e:f7 (try 1/3)
[13652.668731] wlp2s0: RX AssocResp from 84:a4:23:13:6e:f7 (capab=0x11 status=0 aid=2)
[13652.671566] wlp2s0: associated
[13652.677079] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[13652.686366] ath: EEPROM regdomain: 0x80fa
[13652.686369] ath: EEPROM indicates we should expect a country code
[13652.686372] ath: doing EEPROM country->regdmn map search
[13652.686374] ath: country maps to regdmn code: 0x37
[13652.686377] ath: Country alpha2 being used: FR
[13652.686379] ath: Regpair used: 0x37
[13652.686383] ath: regdomain 0x80fa dynamically updated by country IE
[14767.777523] wlp2s0: deauthenticating from 84:a4:23:13:6e:f7 by local choice (Reason: 3=DEAUTH_LEAVING)
[14767.804358] PM: suspend entry (s2idle)
[14767.804359] PM: Syncing filesystems ... done.
[14767.810726] Freezing user space processes ... (elapsed 0.263 seconds) done.
[14768.073821] OOM killer disabled.
[14768.073824] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[14768.075555] Suspending console(s) (use no_console_suspend to debug)
[92321.033001] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[92321.036032] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[92321.080539] OOM killer enabled.
[92321.080540] Restarting tasks ... done.
[92321.091386] [drm] RC6 on
[92321.392828] PM: suspend exit
[92321.405223] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[92322.153190] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[92322.156260] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[92322.204339] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[92322.298995] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[92327.172324] wlp2s0: authenticate with 84:a4:23:13:6e:f7
[92327.219988] wlp2s0: send auth to 84:a4:23:13:6e:f7 (try 1/3)
[92327.222112] wlp2s0: authenticated
[92327.222642] wlp2s0: associate with 84:a4:23:13:6e:f7 (try 1/3)
[92327.225530] wlp2s0: RX AssocResp from 84:a4:23:13:6e:f7 (capab=0x11 status=0 aid=1)
[92327.228613] wlp2s0: associated
[92327.234687] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[92327.243740] ath: EEPROM regdomain: 0x80fa
[92327.243743] ath: EEPROM indicates we should expect a country code
[92327.243744] ath: doing EEPROM country->regdmn map search
[92327.243746] ath: country maps to regdmn code: 0x37
[92327.243749] ath: Country alpha2 being used: FR
[92327.243750] ath: Regpair used: 0x37
[92327.243753] ath: regdomain 0x80fa dynamically updated by country IElshw:
celestin
description: Ordinateur portable
produit: XPS 13 9370 (07E6)
fabriquant: Dell Inc.
numéro de série: CBBSQN2
bits: 64 bits
fonctionnalités: smbios-3.0 dmi-3.0 smp vsyscall32
configuration: boot=normal chassis=laptop family=XPS sku=07E6 uuid=44454C4C-4200-1042-8053-C3C04F514E32
*-core
description: Carte mère
produit: 0F6P3V
fabriquant: Dell Inc.
identifiant matériel: 0
version: A00
numéro de série: /CBBSQN2/CN1296384N0032/
*-firmware
description: BIOS
fabriquant: Dell Inc.
identifiant matériel: 0
version: 1.2.1
date: 02/21/2018
taille: 64KiB
capacité: 15MiB
fonctionnalités: pci pnp upgrade shadowing cdboot bootselect edd int13floppynec int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification netboot uefi
*-memory
description: Mémoire Système
identifiant matériel: 3c
emplacement: Carte mère
taille: 16GiB
*-bank:0
description: Série de composants LPDDR3 Synchrone Unbuffered (Unregistered) 2133 MHz (0,5 ns)
produit: MT52L1G32D4PG-093
fabriquant: Micron
identifiant matériel: 0
emplacement: System Board Memory
taille: 8GiB
bits: 64 bits
horloge: 2133MHz (0.5ns)
*-bank:1
description: Série de composants LPDDR3 Synchrone Unbuffered (Unregistered) 2133 MHz (0,5 ns)
produit: MT52L1G32D4PG-093
fabriquant: Micron
identifiant matériel: 1
emplacement: System Board Memory
taille: 8GiB
bits: 64 bits
horloge: 2133MHz (0.5ns)
*-cache:0
description: L1 cache
identifiant matériel: 40
emplacement: L1 Cache
taille: 256KiB
capacité: 256KiB
fonctionnalités: synchronous internal write-back unified
configuration: level=1
*-cache:1
description: L2 cache
identifiant matériel: 41
emplacement: L2 Cache
taille: 1MiB
capacité: 1MiB
fonctionnalités: synchronous internal write-back unified
configuration: level=2
*-cache:2
description: L3 cache
identifiant matériel: 42
emplacement: L3 Cache
taille: 8MiB
capacité: 8MiB
fonctionnalités: synchronous internal write-back unified
configuration: level=3
*-cpu
description: CPU
produit: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
fabriquant: Intel Corp.
identifiant matériel: 43
information bus: cpu@0
version: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
numéro de série: To Be Filled By O.E.M.
emplacement: U3E1
taille: 1834MHz
capacité: 4GHz
bits: 64 bits
horloge: 100MHz
fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves ibpb ibrs stibp dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp cpufreq
configuration: cores=4 enabledcores=4 threads=8
*-pci
description: Host bridge
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 08
bits: 32 bits
horloge: 33MHz
*-display
description: VGA compatible controller
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 07
bits: 64 bits
horloge: 33MHz
fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
ressources: irq:125 mémoire:db000000-dbffffff mémoire:50000000-5fffffff portE/S:f000(taille=64) mémoire:c0000-dffff
*-generic:0
description: Signal processing controller
produit: Skylake Processor Thermal Subsystem
fabriquant: Intel Corporation
identifiant matériel: 4
information bus: pci@0000:00:04.0
version: 08
bits: 64 bits
horloge: 33MHz
fonctionnalités: msi pm cap_list
configuration: driver=proc_thermal latency=0
ressources: irq:16 mémoire:dc420000-dc427fff
*-usb
description: USB controller
produit: Sunrise Point-LP USB 3.0 xHCI Controller
fabriquant: Intel Corporation
identifiant matériel: 14
information bus: pci@0000:00:14.0
version: 21
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
ressources: irq:122 mémoire:dc410000-dc41ffff
*-usbhost:0
produit: xHCI Host Controller
fabriquant: Linux 4.15.0-20-generic xhci-hcd
identifiant matériel: 0
information bus: usb@1
nom logique: usb1
version: 4.15
fonctionnalités: usb-2.00
configuration: driver=hub slots=12 speed=480Mbit/s
*-usb:0
description: Vidéo
produit: Integrated_Webcam_HD
fabriquant: Integrated_Webcam_HD
identifiant matériel: 5
information bus: usb@1:5
version: 76.05
numéro de série: 200901010001
fonctionnalités: usb-2.10
configuration: driver=uvcvideo maxpower=500mA speed=480Mbit/s
*-usb:1
description: Interface sans fil Bluetooth
fabriquant: Foxconn / Hon Hai
identifiant matériel: 7
information bus: usb@1:7
version: 0.01
fonctionnalités: bluetooth usb-1.10
configuration: driver=btusb maxpower=100mA speed=12Mbit/s
*-usbhost:1
produit: xHCI Host Controller
fabriquant: Linux 4.15.0-20-generic xhci-hcd
identifiant matériel: 1
information bus: usb@2
nom logique: usb2
version: 4.15
fonctionnalités: usb-3.00
configuration: driver=hub slots=6 speed=5000Mbit/s
*-generic:1
description: Signal processing controller
produit: Sunrise Point-LP Thermal subsystem
fabriquant: Intel Corporation
identifiant matériel: 14.2
information bus: pci@0000:00:14.2
version: 21
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi cap_list
configuration: driver=intel_pch_thermal latency=0
ressources: irq:18 mémoire:dc434000-dc434fff
*-generic:2
description: Signal processing controller
produit: Sunrise Point-LP Serial IO I2C Controller #0
fabriquant: Intel Corporation
identifiant matériel: 15
information bus: pci@0000:00:15.0
version: 21
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: driver=intel-lpss latency=0
ressources: irq:16 mémoire:dc433000-dc433fff
*-generic:3
description: Signal processing controller
produit: Sunrise Point-LP Serial IO I2C Controller #1
fabriquant: Intel Corporation
identifiant matériel: 15.1
information bus: pci@0000:00:15.1
version: 21
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: driver=intel-lpss latency=0
ressources: irq:17 mémoire:dc432000-dc432fff
*-communication
description: Communication controller
produit: Sunrise Point-LP CSME HECI #1
fabriquant: Intel Corporation
identifiant matériel: 16
information bus: pci@0000:00:16.0
version: 21
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=mei_me latency=0
ressources: irq:124 mémoire:dc431000-dc431fff
*-pci:0
description: PCI bridge
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: f1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:16 mémoire:dc300000-dc3fffff
*-generic
description: Unassigned class
produit: RTS525A PCI Express Card Reader
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: 01
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=rtsx_pci latency=0
ressources: irq:123 mémoire:dc300000-dc300fff
*-pci:1
description: PCI bridge
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1c.2
information bus: pci@0000:00:1c.2
version: f1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:18 mémoire:dc000000-dc1fffff
*-network
description: Interface réseau sans fil
produit: QCA6174 802.11ac Wireless Network Adapter
fabriquant: Qualcomm Atheros
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: wlp2s0
version: 32
numéro de série: 9c:b6:d0:8b:33:c5
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ath10k_pci driverversion=4.15.0-20-generic firmware=WLAN.RM.4.4.1-00079-QCARMSWPZ-1 ip=192.168.1.14 latency=0 link=yes multicast=yes wireless=IEEE 802.11
ressources: irq:135 mémoire:dc000000-dc1fffff
*-pci:2
description: PCI bridge
produit: Sunrise Point-LP PCI Express Root Port #5
fabriquant: Intel Corporation
identifiant matériel: 1c.4
information bus: pci@0000:00:1c.4
version: f1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:16 portE/S:2000(taille=12288) mémoire:ac000000-da0fffff portE/S:60000000(taille=1241513984)
*-pci:3
description: PCI bridge
produit: Sunrise Point-LP PCI Express Root Port #9
fabriquant: Intel Corporation
identifiant matériel: 1d
information bus: pci@0000:00:1d.0
version: f1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:16 mémoire:dc200000-dc2fffff
*-storage
description: Non-Volatile memory controller
produit: Toshiba America Info Systems
fabriquant: Toshiba America Info Systems
identifiant matériel: 0
information bus: pci@0000:6e:00.0
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: storage pciexpress pm msi msix nvm_express bus_master cap_list
configuration: driver=nvme latency=0
ressources: irq:16 mémoire:dc200000-dc203fff
*-isa
description: ISA bridge
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 21
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master
configuration: latency=0
*-memory NON-RÉCLAMÉ
description: Memory controller
produit: Sunrise Point-LP PMC
fabriquant: Intel Corporation
identifiant matériel: 1f.2
information bus: pci@0000:00:1f.2
version: 21
bits: 32 bits
horloge: 33MHz (30.3ns)
configuration: latency=0
ressources: mémoire:dc42c000-dc42ffff
*-multimedia
description: Audio device
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1f.3
information bus: pci@0000:00:1f.3
version: 21
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=snd_hda_intel latency=32
ressources: irq:127 mémoire:dc428000-dc42bfff mémoire:dc400000-dc40ffff
*-serial NON-RÉCLAMÉ
description: SMBus
produit: Sunrise Point-LP SMBus
fabriquant: Intel Corporation
identifiant matériel: 1f.4
information bus: pci@0000:00:1f.4
version: 21
bits: 64 bits
horloge: 33MHz
configuration: latency=0
ressources: mémoire:dc430000-dc4300ff portE/S:f040(taille=32)
*-battery
produit: DELL G8VCF6C
fabriquant: SMP
identifiant matériel: 1
version: 03/07/2018
numéro de série: 0855
emplacement: Sys. Battery Bay
capacité: 51990mWh
configuration: voltage=7,6Vapt get update etc...:
toto@celestin:~$ sudo apt-get update
Atteint:1 http://fr.archive.ubuntu.com/ubuntu bionic InRelease
Atteint:2 http://archive.canonical.com/ubuntu bionic InRelease
Atteint:3 http://fr.archive.ubuntu.com/ubuntu bionic-updates InRelease
Ign:4 http://dl.google.com/linux/chrome/deb stable InRelease
Atteint:5 http://fr.archive.ubuntu.com/ubuntu bionic-backports InRelease
Atteint:6 http://dl.google.com/linux/chrome/deb stable Release
Atteint:7 http://fr.archive.ubuntu.com/ubuntu bionic-security InRelease
Lecture des listes de paquets... Fait
toto@celestin:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04 LTS"
toto@celestin:~$ echo $DESKTOP_SESSION
ubuntu
toto@celestin:~$ uname -a
Linux celestin 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
toto@celestin:~$ blame:
13.325s apt-daily.service
2.528s apt-daily-upgrade.service
902ms bolt.service
471ms dev-nvme0n1p3.device
323ms systemd-logind.service
225ms systemd-resolved.service
193ms systemd-timesyncd.service
159ms NetworkManager.service
159ms lightdm.service
158ms plymouth-quit-wait.service
105ms systemd-udev-trigger.service
95ms upower.service
89ms systemd-journal-flush.service
52ms accounts-daemon.service
52ms udisks2.service
46ms NetworkManager-wait-online.service
44ms keyboard-setup.service
41ms apparmor.service
36ms lvm2-lvmetad.service
35ms net-Backup3_Fred.mount
35ms bluetooth.service
33ms user@1001.service
33ms systemd-fsck@dev-disk-by\x2duuid-4446\x2dB242.service
33ms lvm2-lvmpolld.service
32ms alsa-restore.service
31ms grub-common.service
29ms ModemManager.service
28ms snapd.service
28ms systemd-fsck@dev-disk-by\x2duuid-5bde1229\x2db2b7\x2d4b79\x2dbe8f\x2da35bf315f7ba.service
27ms systemd-udevd.service
27ms systemd-journald.service
25ms networking.service
25ms rsyslog.service
24ms thermald.service
17ms setvtrgb.service
16ms gpu-manager.service
15ms pppd-dns.service
15ms systemd-modules-load.service
15ms spice-vdagent.service
14ms binfmt-support.service
14ms apport.service
14ms net-rolande-backup_fred.mount
14ms plymouth-read-write.service
12ms wpa_supplicant.service
12ms plymouth-start.service
12ms systemd-tmpfiles-clean.service
11ms systemd-tmpfiles-setup-dev.service
11ms run-rpc_pipefs.mount
11ms resolvconf-pull-resolved.service
11ms speech-dispatcher.service
10ms polkit.service
9ms avahi-daemon.service
9ms colord.service
8ms home.mount
8ms systemd-tmpfiles-setup.service
7ms proc-sys-fs-binfmt_misc.mount
7ms ureadahead-stop.service
7ms dev-mqueue.mount
7ms rpcbind.service
6ms ufw.service
5ms dev-hugepages.mount
5ms net-brigitte-music.mount
5ms net-rolande-music.mount
5ms systemd-remount-fs.service
5ms net-brigitte-hubic_fred.mount
4ms systemd-update-utmp.service
4ms systemd-sysctl.service
4ms boot-efi.mount
4ms rtkit-daemon.service
4ms net-brigitte-photo.mount
4ms net-rolande-backup_anne.mount
4ms dns-clean.service
4ms kmod-static-nodes.service
3ms systemd-random-seed.service
3ms tlp-sleep.service
3ms resolvconf.service
3ms systemd-update-utmp-runlevel.service
3ms net-freebox.mount
3ms tlp.service
2ms nfs-config.service
2ms systemd-backlight@leds:dell::kbd_backlight.service
2ms systemd-user-sessions.service
2ms systemd-backlight@backlight:intel_backlight.service
2ms console-setup.service
1ms sys-kernel-config.mount
1ms openvpn.service
1ms sys-kernel-debug.mount
1ms sys-fs-fuse-connections.mount
656us snapd.socketcritical chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @1.332s
└─multi-user.target @1.332s
└─getty.target @1.332s
└─getty@tty1.service @1.332s
└─system-getty.slice @1.331s
└─setvtrgb.service @1.314s +17ms
└─systemd-user-sessions.service @1.151s +2ms
└─network.target @1.093s
└─NetworkManager.service @934ms +159ms
└─dbus.service @923ms
└─basic.target @905ms
└─sockets.target @905ms
└─snapd.socket @905ms +656us
└─sysinit.target @903ms
└─systemd-timesyncd.service @710ms +193ms
└─systemd-tmpfiles-setup.service @701ms +8ms
└─local-fs.target @698ms
└─home.mount @689ms +8ms
└─systemd-fsck@dev-disk-by\x2duuid-5bde1229\x2db2b7\x2d4b79\x2dbe8f\x2da35bf315f7ba.service @661ms +28ms
└─dev-disk-by\x2duuid-5bde1229\x2db2b7\x2d4b79\x2dbe8f\x2da35bf315f7ba.device @650msCe qui me chiffonne c'est le kernel qui met plus de 30sec, mais je n'ai aucun détail sur le contenu.
$ systemd-analyze
Startup finished in 8.907s (firmware) + 4.712s (loader) + 34.267s (kernel) + 1.336s (userspace) = 49.224s
graphical.target reached after 1.332s in userspace=> En fait, la partie userspace est plus ou moins longue: on y retrouve le "daily apt-get update" au premier boot du jour.
et au moment de mon premier post, j'avais eu le fstrim (pour le SSD) qui doit être lancé de temps en temps.
Cette partie là, j'en fait mon affaire.
C'est cette partie là que je ne sais pas comment aborder: 8.907s (firmware) + 4.712s (loader) + 34.267s (kernel)
Quand je génère un plot SVG (bootchart): je n'ai aucun détail sur le contenu de ces étapes.
:-)
Hors ligne
#4 Le 08/05/2018, à 11:39
- bruno
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
Bonjour,
Pour le temps assez long marqué comme « firmware » je suppose que c'est dû à l'UEFI. Il faut voir si tu peux désactiver cela dans le BIOS.
#5 Le 08/05/2018, à 14:05
- wysiwyg31
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
Si je desactive le boot UEFI, ca ne boote plus...il ne détecte pas le disque.
J'avoue que j'ai une connaissance un peu limité sur l'UEFI (c'est mon premier PC avec 
)
Hors ligne
#6 Le 08/05/2018, à 18:53
- LukePerp
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
Peux tu redémarrer la machine, puis immédiatement dès que possible, taper :
dmesg | tail t 200Je soupçonne un montage mal paramétré.
[ 5.127137] pci_bus 0000:04: busn_res: [bus 04-6d] is released
[ 34.199911] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)Donnes nous le retour complet de :
sudo blkidcat /etc/fstabGamer inside - Ubuntu Mate dernière LTS - Intel i5, 16 Go - Dual boot Windows - Utilisateur de Dapps sur Ethereum
Hors ligne
#7 Le 09/05/2018, à 11:04
- wysiwyg31
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
Bonjour !
la commande dmesg | tail t 200 ne fonctionne pas.
~$ dmesg | tail t 200
tail: impossible d'ouvrir 't' en lecture: Aucun fichier ou dossier de ce type
tail: impossible d'ouvrir '200' en lecture: Aucun fichier ou dossier de ce typej'ai essayé -t, mais tail n'a pas d'option -t :-)
effectivement, j'avais aussi noté ce décroché dans le temps (~20sec d'un coup) dans dmesg...
$ sudo blkid
/dev/nvme0n1p1: LABEL="ESP" UUID="4446-B242" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="9fe11b3c-06ed-49bc-adda-bcce528bee49"
/dev/nvme0n1p2: LABEL="OS" UUID="9892-46BB" TYPE="vfat" PARTLABEL="Basic data partition" PARTUUID="f5c3f154-7c0e-4327-8656-7eb54bec4623"
/dev/nvme0n1p3: LABEL="UBUNTU" UUID="f62ee688-4ed2-44f6-a581-37a03d7828f8" TYPE="ext4" PARTUUID="1d09b047-22ca-44aa-bd01-189a700faf5b"
/dev/nvme0n1p4: UUID="5bde1229-b2b7-4b79-be8f-a35bf315f7ba" TYPE="ext4" PARTUUID="91b93e17-af22-49e4-89c1-82c557edfd1f"
/dev/nvme0n1p5: UUID="f97e17e2-d139-4b8b-a7d0-1c38b396aed0" TYPE="swap" PARTUUID="5cfc0da3-b1bf-4f1f-b33f-7df627e6d2f9"
/dev/nvme0n1: PTUUID="8d394857-dc75-4007-ad34-f1574cc8511a" PTTYPE="gpt"$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/nvme0n1p3 during installation
UUID=f62ee688-4ed2-44f6-a581-37a03d7828f8 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/nvme0n1p1 during installation
UUID=4446-B242 /boot/efi vfat umask=0077 0 1
# /home was on /dev/nvme0n1p4 during installation
UUID=5bde1229-b2b7-4b79-be8f-a35bf315f7ba /home ext4 defaults 0 2
# swap was on /dev/nvme0n1p5 during installation
#UUID=30ec225a-6304-452a-9082-c1d234a8b6ca none swap sw 0 0
#/dev/mapper/cryptswap1 none swap sw 0 0 J'ai aussi des disques réseaux dans fstab, mais j'ai supprimé pour ne pas polluer (le message dmesg semble plutot s'orienter vers mon ssd)
la partition nvmen1p3 c'est mon "/", j'ai une autre partition pour /home (nvmen1p4).
Hors ligne
#8 Le 09/05/2018, à 11:07
- wysiwyg31
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
J'ai désactivé le cryptage de swap (qui me demandais un mdp regulièrement), mais je me demande si j'ai pas oublié un truc :-) (nvme0n1p5)
Hors ligne
#9 Le 09/05/2018, à 11:15
- bruno
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
C'est peut-être une connerie mais personnellement je désactiverais l'UEFI (et tout ce qui ressemble à « secure boot ») dans le BIOS et je referais une installation avec un schéma de partitionnement sans partitions FAT, du type une partition primaire avec système de fichiers ext4 pour monter /, une autre pour monter /home et une pour le swap.
Dernière modification par bruno (Le 09/05/2018, à 11:15)
#10 Le 09/05/2018, à 11:33
- wysiwyg31
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
hummm... j'ai rien contre, mais comme je connais rien à l'UEFI et comment ca marche...(c'est mon premier PC qui l'a...) et j'ai souvent vu foule de problème avec ce truc dans les forums, j'ai pas osé trop toucher.
Donc.
-Je désactive le boot UEFI pour mettre le boot à l'ancienne.
-Je vire toutes les partitions et je refais juste un "/" et un "/home" ?
C'est sans risque ?
Pour le swap, j'hésite: ici il est dit que maintenant on met plutot un fichier qu'une partition ( https://doc.ubuntu-fr.org/swap ).
Ce qui me plait bien (laisser 8Go de partition swap qui serviront peut etre jamais....j'ai 16G de ram)
Hors ligne
#11 Le 09/05/2018, à 11:39
- wysiwyg31
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
voici mon bios:
en UEFI (je sais pas ce qu'est ce MokSBStateset)
https://preview.ibb.co/dgrTdn/IMG_20180509_123421879_HDR_1920x1080.jpg
en legacy:
https://preview.ibb.co/c4gN4S/IMG_20180509_123436758_1920x1080.jpg
Modération : merci d'utiliser des images de petite taille (300x300) ou des miniatures pointant sur ces images (Des hébergeurs comme Toile Libre, TDCT'Pix le permettent).
Dernière modification par cqfd93 (Le 09/05/2018, à 17:32)
Hors ligne
#12 Le 09/05/2018, à 11:47
- grigouille
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
Une aide possible :
https://forum.ubuntu-fr.org/viewtopic.php?id=2023672
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#13 Le 09/05/2018, à 12:01
- wysiwyg31
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
Bonne pioche ! (je crois):
$ cat /etc/initramfs-tools/conf.d/resume
RESUME=UUID=30ec225a-6304-452a-9082-c1d234a8b6cac'est le UUID du swap (mais commenté) dans fstab.
en même temps, mon swap est plus petit que ma RAM...
Je vais tester "none".
edit:
apres test avec :
$ cat /etc/initramfs-tools/conf.d/resume
RESUME=none$ systemd-analyze
Startup finished in 9.772s (firmware) + 5.898s (loader) + 3.120s (kernel) + 1.514s (userspace) = 20.306s
graphical.target reached after 1.278s in userspacevictoire !!!!
:D:D:D:D:D:D
il me reste ces 9sec de firmware (peut etre lié à UEFI) ?
Je vais regarder un peu plus avant de faire des betises...
Dernière modification par wysiwyg31 (Le 09/05/2018, à 12:08)
Hors ligne
#14 Le 09/05/2018, à 12:47
- grigouille
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
Je vois que ce problème affecte beaucoup de gens. J'espère que tu pourras encore gagner quelques secondes.
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne
#15 Le 09/05/2018, à 12:58
- moko138
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
wysiwyg31 a écrit :
Bonne pioche ! (je crois):
$ cat /etc/initramfs-tools/conf.d/resume RESUME=UUID=30ec225a-6304-452a-9082-c1d234a8b6cac'est le UUID du swap (mais commenté) dans fstab.
en même temps, mon swap est plus petit que ma RAM...
Je vais tester "none".edit:
apres test avec :$ cat /etc/initramfs-tools/conf.d/resume RESUME=none$ systemd-analyze Startup finished in 9.772s (firmware) + 5.898s (loader) + 3.120s (kernel) + 1.514s (userspace) = 20.306s graphical.target reached after 1.278s in userspacevictoire !!!!
il me reste ces 9sec de firmware (peut etre lié à UEFI) ?
Je vais regarder un peu plus avant de faire des betises...
Exécute
sudo update-initramfs -u -k all
sudo update-grubet redémarre.
Dans lshw, il y a deux périphériques "NON-RÉCLAMÉ" :
*-memory NON-RÉCLAMÉ
description: Memory controller
produit: Sunrise Point-LP PMC
fabriquant: Intel Corporation
identifiant matériel: 1f.2
information bus: pci@0000:00:1f.2
version: 21
bits: 32 bits
horloge: 33MHz (30.3ns)
configuration: latency=0
ressources: mémoire:dc42c000-dc42ffff
*-serial NON-RÉCLAMÉ
description: SMBus
produit: Sunrise Point-LP SMBus
fabriquant: Intel Corporation
identifiant matériel: 1f.4
information bus: pci@0000:00:1f.4
version: 21
bits: 64 bits
horloge: 33MHz
configuration: latency=0
ressources: mémoire:dc430000-dc4300ff portE/S:f040(taille=32)J'ai aussi des disques réseaux dans fstab, mais j'ai supprimé pour ne pas polluer (le message dmesg semble plutot s'orienter vers mon ssd)
En phase de diagnostic de dépannage, on cherche sans a priori des pistes.
Donc donne ton fstab complet.
- -
Donne ou redonne :
sudo blkid -t TYPE=swap ; echo ; grep none /etc/fstabcat /proc/swaps ; echo ; grep UUID /etc/initramfs-tools/conf.d/resume Explication :
/etc/initramfs-tools/conf.d/resume
doit contenir le bon uuid pour la swap.
cat /proc/swaps
doit contenir le bon sdXN pour la swap :
Filename Type Size Used Priority
/dev/sdXN partition 5245216 144128 -1
Dans le cas d'un fichier de swap, j'ignore les variantes.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#16 Le 09/05/2018, à 13:09
- bruno
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
Oui je me demande si le souci ne venait pas du fait que le swap était pls petit que la RAM. Si l'on veut que l'hibernation fonctionne il faut que le swap soit >= à la RAM.
#17 Le 09/05/2018, à 14:52
- wysiwyg31
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
Hello,
J'avais fait
sudo update-initramfs -u en suivant le post de Grigouille, mais j'ai refais avec -k all
+ le update grub que je n'avais pas fait.
En parallèle, j'ai suivi la doc pour créer un swap en fichier et non en partition.
J'ai mis 8G et le fichier est /swapfile
Voilà mon fstab complet maintenant (avec la modif swapfile)
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/nvme0n1p3 during installation
UUID=f62ee688-4ed2-44f6-a581-37a03d7828f8 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/nvme0n1p1 during installation
UUID=4446-B242 /boot/efi vfat umask=0077 0 1
# /home was on /dev/nvme0n1p4 during installation
UUID=5bde1229-b2b7-4b79-be8f-a35bf315f7ba /home ext4 defaults 0 2
# swap was on /dev/nvme0n1p5 during installation
#UUID=30ec225a-6304-452a-9082-c1d234a8b6ca none swap sw 0 0
#/dev/mapper/cryptswap1 none swap sw 0 0
/swapfile none swap defaults 0 0
# Montage NAS Brigitte
//brigitte/Music /net/brigitte/music cifs _netdev,credentials=/home/toto/.cred_smb_brigitte,auto,rw 0 0
//brigitte/photo /net/brigitte/photo cifs _netdev,credentials=/home/toto/.cred_smb_brigitte,auto,rw 0 0
brigitte:/volume1/Backup3_toto /net/Backup3_toto nfs auto,_netdev,nolock,hard,rsize=65536,wsize=65536,tcp,noatime,intr,timeo=20 0 0
192.168.1.122:/HDD_Rolande/Music /net/rolande/music nfs nfsvers=3,auto,_netdev,nolock,hard,rsize=65536,wsize=65536,tcp,noatime,intr,timeo=20 0 0
192.168.1.122:/HDD_Rolande/backup_toto /net/rolande/backup_toto nfs nfsvers=3,auto,_netdev,nolock,hard,rsize=65536,wsize=65536,tcp,noatime,intr,timeo=20 0 0
# Montage freebox
//freebox/Disque\040dur /net/freebox cifs _netdev,rw,users,iocharset=utf8,uid=1000,file_mode=0777,dir_mode=0777,credentials=/home/toto/.cred_smb_freebox 0 0ensuite:
$ sudo blkid -t TYPE=swap ; echo ; grep none /etc/fstab
/dev/nvme0n1p5: UUID="f97e17e2-d139-4b8b-a7d0-1c38b396aed0" TYPE="swap" PARTUUID="5cfc0da3-b1bf-4f1f-b33f-7df627e6d2f9"
#UUID=30ec225a-6304-452a-9082-c1d234a8b6ca none swap sw 0 0
#/dev/mapper/cryptswap1 none swap sw 0 0
/swapfile none swap defaults 0 0hum j'ai encore la partition swap nvme0n1p5, mais comme j'ai mis un swap file, je comptais juste la supprimer via gparted.
toto@celestin:/$ cat /proc/swaps ; echo ; grep UUID /etc/initramfs-tools/conf.d/resume
Filename Type Size Used Priority
/swapfile file 8388604 0 -2
toto@celestin:/$ cat /proc/swaps
Filename Type Size Used Priority
/swapfile file 8388604 0 -2
toto@celestin:/$ cat /etc/initramfs-tools/conf.d/resume
RESUME=none
toto@celestin:/$ J'ai mis le RESUME=none tout à l'heure, ca résoud le pb de temps de boot (30sec de moins).
L'UUID n'etait clairement pas le bon, il avait gardé celui du swap crypté que j'ai supprimé ya quelques temps (1 ou 2 semaines).
Par contre, je n'arrive pas à trouver de doc sur les choix (et conséquences) possibles dans ce fichiers.
à part:
https://wiki.debian.org/Hibernation/Hib … _Partition
https://lists.debian.org/debian-kernel/ … 00243.html
Ce que je comprends c'est:
- Si je veux pas d'hibernate: je laisse comme j'ai (=none).
- Si je veux l'hibernate: il faut que je passe mon swap à 16G et je suis le tuto debian (hibernate without swap partition).
A première vue, je dirais qu'avec un boot rapide, je me passe de l'hibernate (j'ai lu aussi que c'etait pas terrible pour les SSDs).
Bien vu pour le lshw...à regarder aussi.
Hors ligne
#18 Le 10/05/2018, à 02:18
- moko138
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
Est-ce que la mise en veille ("suspend") fonctionne ?
Quand tu auras supprimé la partition swap nvme0n1p5, pense à refaire un
sudo update-initramfs -u -k allLe -k all signifie "pour tous les kernels"
wysiwyg31 a écrit :
je n'arrive pas à trouver de doc sur les choix (et conséquences) possibles dans ce fichiers.
Vois le
man initramfs.confde ta distribution.
Et, si besoin, les mans de initramfs-tools, mkinitramfs, update-initramfs.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#19 Le 10/05/2018, à 11:31
- wysiwyg31
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
La mise en veille (et la sortie de veille) fonctionne bien.
Merci pour le man initramfs.conf !
Et plus généralement, merci à tous pour vos réponses !
Hors ligne
#20 Le 10/05/2018, à 12:31
- moko138
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
PC complètement éteint, quel est le chrono
de la mise sous tension à la demande de mot de passe ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#21 Le 10/05/2018, à 14:19
- wysiwyg31
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
Autour de 27sec.
Hors ligne
#22 Le 10/05/2018, à 15:12
- grigouille
Re : Temps de boot ubuntu 18.04, quelques services longs à démarrer ?
Bonjour à tous,
Après une nouvelle installation sur un nouvel ordinateur, j'ai eu à nouveau ce problème. La modification du fichier resume n'a rien changée.
Par contre, si on ajoute noresume à grub, c'est bon :
$ grep noresume /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash noresume"Bien sûr faire
sudo update-grubaprès le changement.
Debian (xfce) 12
HP LaserJet M1132 MFP
Hors ligne