#51 Le 27/08/2017, à 06:33
- moko138
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Tu fais bien de poser la question.
À partir d'un système d'exploitation opérationnel (même un windows/mac/android...) enregistre à la racine d'une clef usb ce nouveau fstab provisoire (car nous allons procéder par étapes); (tu l'enregistres sous le nom de fstab).
Il s'agit du fstab que je t'ai forgé sur mesure (message #46).
- -
philoeil a écrit :
Ce que j'avais fais :
J'ai ouvert une console avec alt+F2
j'ai monté la clef USB (en sdd1)
J'qi copier /etc/fstab sur la clef.Est-ce bon ?
Pas bon. Car
au mieux tu as copié le fstab en place et mauvais sur ta clef. Rien à voir avec mon fstab corrigé provisoire.
Quant à la copie de sécu du fstab mauvais, elle est à faire sur place (à l'intérieur du répertoire /etc)
- -
Enfin il y a une impossibilité.
Tu dis :
j'ai monté la clef USB (en sdd1)
Tu dois comprendre que si ta clef physique (enfin sa partition) est vue momentanément comme /dev/sdd1, Ce N'est PAS son point de montage.
Qu'est-ce que le montage ?
Quand tu dresses le couvert, tu sors du buffet l'assiette /dev/sdd1 (périphérique physique)
et tu la mets sur la table à la place (point de montage) qui est face à la fenêtre.
Alors seulement tu peux t'en servir normalement.
C'est cela le montage.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#52 Le 27/08/2017, à 09:52
- philoeil
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Bonjour,
5066 mises sous tension en 873 heures ???
Tu éteins ton pc au bout de neuf minutes, en moyenne ???
Etrange mais peut-être, sur une longue période pourraient être cohérent si on considère que le passage en veille est une extinction. parfois il n'était ouvert que quelques minutes pour
Désolé je me suis mal exprimé
j'ai monté la clef USB (en sdd1)
Je voulais dire que j'avais à partir de la localisation de ma clef usb momentanément en sdd1 montée celle-ci sur /media/Dusb
J'ai "À partir d'un système opérationnel"= "d'un autre PC" copier collé les lignes que tu avaient créées dans ton post (message #46).
(désolé je n'avais pas compris que c'était le nouveau fstab)
J'ai ouvert ma console depuis la fenètre commande avec alt+F2 (depuis l'acces page utilisateur)
J'ai rencontré un problème de permission pour copier coller fstab
J'ai du changé les droit de /etc/fstab pour pouvoir réaliser le copier coller :
-rwxrwxr-- 1 root root 919 août 27 10:20 /etc/fstabJ'ai redémarré normalement
message "waiting for network configuration" (affiché 30 secondes)
tentative de connexion sur phil et nad = echec
sur libre = echec
juliette = echec
session d'invité = echec
( svp Il faudra m'indiquer si je dois rechanger les droits de /etc/fstab)
Merci
Hors ligne
#53 Le 27/08/2017, à 10:21
- moko138
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
philoeil a écrit :
Etrange mais peut-être, sur une longue période pourraient être cohérent si on considère que le passage en veille est une extinction. parfois il n'était ouvert que quelques minutes pour
Merci de finir tes phrases.
- -
J'ai ouvert ma console depuis la fenètre commande avec alt+F2 (depuis l'acces page utilisateur)
J'ai rencontré un problème de permission pour copier coller fstab
J'ai du changé les droit de /etc/fstab
STOP !
Soit tu agis dans ta session
et tu fais comme je te l'ai montré en #46, avec sudo,
Soit tu agis comme en #47 dans la session de root,
et tu fais comme je te l'ai montré en #49 (parce que je m'adaptais à ton changement de méthode).
Mais tu ne panaches pas !
- -
Bien sûr qu'il faut rétablir les droits originaux (tu les as en #47) de fstab ! C'est un fichier-système essentiel.
Préviens quand c'est fait, qu'on passe à la suite.
Dernière modification par moko138 (Le 27/08/2017, à 10:23)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#54 Le 27/08/2017, à 12:47
- philoeil
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Bonjour,
Ok Vu :
=Etrange mais peut-être, sur une longue période pourraient être cohérent si on considère que le passage en veille est une extinction. parfois il n'était ouvert que quelques minutes pour consulter internet
J'ai rétabli les droits de fstab et j'ai redémarré :
(J'ai vu quelques message d'erreur au demarrage de la session (1/2 seconde):
mais cela va trop vite pour que je relève.
mais la session ne se lance toujours pas.
Merci
Hors ligne
#55 Le 27/08/2017, à 14:22
- moko138
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
OK.
Quand tu es dans ta session, tu montes toujours la clef usb sur /media/Dusb ?
Si oui, depuis ta session, clef montée, exécute
cd /media/Dusb; echo 'fstab' > titi23.txt; ls -l /etc/fstab >> titi23.txt; echo '==========' >> titi23.txt; cat /etc/fstab >> titi23.txt; echo >> titi23.txt; echo '==========' >> titi23.txt; echo >> titi23.txt; echo 'sudo cat /var/log/dmesg' >> titi23.txt; sudo cat /var/log/dmesg >> titi23.txt; cd; sudo rm .*authorityça va créer un fichier titi23.txt sur ta clef.
Bien entendu, si tu as un message d'erreur, tu le donneras ici. 
Ensuite,
depuis n'importe quel système opérationnel,
tu colleras ici le contenu de titi23.txt, entre balises-code.
On pourra y lire :
- si les premières réparations ont fonctionné ;
- les messages d'erreur de démarrage de la session !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#56 Le 27/08/2017, à 17:15
- moko138
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Mon petit doigt me souffle que ceci aussi pourrait être utile :
Depuis ta session,
clef montée, exécute :
cd /media/Dusb; echo '/var/log/apt/history.log' >> titi45.txt; sudo cat /var/log/apt/history.log >> titi45.txtCela créera titi45.txt sur ta clef.
Ensuite
depuis n'importe quel système opérationnel,
tu colleras ici le contenu de titi45.txt, entre balises-code.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#57 Le 28/08/2017, à 20:24
- philoeil
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Bonjour,
Oui c'est bien ça
fichier titi23.txt
fstab
-rw-r--r-- 1 root root 919 août 27 10:20 /etc/fstab
============
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
#Entry for /dev/sdb7 :
UUID=98bb42d7-6aae-43c9-8c15-07429294faad / ext4 errors=remount-ro 0 1
#
#Entry for /dev/sdb5 :
UUID=c7465b27-cfec-4f73-b171-dfc94cca34f2 /home ext4 defaults 0 2
#
# swap sur sdb8
UUID=0e07b0d6-cbbf-4dc5-8f86-4f560f1bb818 none swap sw 0 0
#
# Entry for /dev/sdc5 :
UUID=79EC7D3D53F9F6C2 /mnt/79EC7D3D53F9F6C2 ntfs-3g defaults,locale=fr_FR.UTF-8,nofail,uid=1000,gid=1000,windows_names 0 0
#
# Entry for /dev/sdc1 :
#UUID=48F4F527F4F517C0 /media/phil/1_windows_C ntfs-3g defaults,locale=fr_FR.UTF-8,nofail,uid=1000,gid=1000,windows_names 0 0
#
# Entry for /dev/sdb1 (antérieurement montée sur /media/nad) :
#UUID=7E14CBFC14CBB605 /media/phil/2_Prog_files_D ntfs-3g defaults,locale=fr_FR.UTF-8,nofail,uid=1000,gid=1000,windows_names 0 0
#
==============
sudo cat /var/log/dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-128-generic (buildd@lgw01-39) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #177-Ubuntu SMP Tue Aug 8 11:40:23 UTC 2017 (Ubuntu 3.13.0-128.177-generic 3.13.11-ckt39)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-128-generic root=UUID=98bb42d7-6aae-43c9-8c15-07429294faad ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/A8N-SLI Premium, BIOS ASUS A8N-SLI Premium ACPI BIOS Revision 1303 08/10/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f5880-0x000f588f] mapped at [ffff8800000f5880]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7ffeffff]
[ 0.000000] [mem 0x7fe00000-0x7ffeffff] page 4k
[ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35b26000-0x36d8afff]
[ 0.000000] ACPI: RSDP 00000000000f7c60 000014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 000000007fff3040 000030 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 000000007fff30c0 000074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 000000007fff3180 006A16 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000000007fff0000 000040
[ 0.000000] ACPI: MCFG 000000007fff9cc0 00003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 000000007fff9c00 00007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffeffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ffeffff]
[ 0.000000] NODE_DATA [mem 0x7ffeb000-0x7ffeffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffeffff]
[ 0.000000] On node 0 totalpages: 524174
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8128 pages used for memmap
[ 0.000000] DMA32 zone: 520176 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s81536 r8192 d20864 u1048576
[ 0.000000] pcpu-alloc: s81536 r8192 d20864 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515961
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-128-generic root=UUID=98bb42d7-6aae-43c9-8c15-07429294faad ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 19c000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 2028228K/2096696K available (7433K kernel code, 1147K rwdata, 3424K rodata, 1340K init, 1448K bss, 68468K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2010.332 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.008008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.66 BogoMIPS (lpj=8041328)
[ 0.008012] pid_max: default: 32768 minimum: 301
[ 0.008075] Security Framework initialized
[ 0.008119] AppArmor: AppArmor initialized
[ 0.008120] Yama: becoming mindful.
[ 0.008482] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.013442] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.014951] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.014959] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.015472] Initializing cgroup subsys memory
[ 0.015493] Initializing cgroup subsys devices
[ 0.015497] Initializing cgroup subsys freezer
[ 0.015500] Initializing cgroup subsys blkio
[ 0.015503] Initializing cgroup subsys perf_event
[ 0.015506] Initializing cgroup subsys hugetlb
[ 0.015540] tseg: 0000000000
[ 0.015552] mce: CPU supports 5 MCE banks
[ 0.015570] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.015570] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.015570] tlb_flushall_shift: 4
[ 0.027836] ACPI: Core revision 20131115
[ 0.032688] ACPI: All ACPI Tables successfully acquired
[ 0.034017] ftrace: allocating 28676 entries in 113 pages
[ 0.052548] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.060000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.060000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.060000] ..... (found apic 0 pin 0) ...
[ 0.068000] ....... failed.
[ 0.068000] ...trying to set up timer as Virtual Wire IRQ...
[ 0.068000] ..... failed.
[ 0.068000] ...trying to set up timer as ExtINT IRQ...
[ 0.110696] ..... works.
[ 0.110698] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 2f, stepping: 00)
[ 0.112000] Performance Events: AMD PMU driver.
[ 0.112000] ... version: 0
[ 0.112000] ... bit width: 48
[ 0.112000] ... generic registers: 4
[ 0.112000] ... value mask: 0000ffffffffffff
[ 0.112000] ... max period: 00007fffffffffff
[ 0.112000] ... fixed-purpose events: 0
[ 0.112000] ... event mask: 000000000000000f
[ 0.112000] x86: Booted up 1 node, 1 CPUs
[ 0.112000] smpboot: Total of 1 processors activated (4020.66 BogoMIPS)
[ 0.112000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.112000] devtmpfs: initialized
[ 0.116179] EVM: security.selinux
[ 0.116180] EVM: security.SMACK64
[ 0.116182] EVM: security.ima
[ 0.116183] EVM: security.capability
[ 0.116256] PM: Registering ACPI NVS region [mem 0x7fff0000-0x7fff2fff] (12288 bytes)
[ 0.117882] pinctrl core: initialized pinctrl subsystem
[ 0.118001] regulator-dummy: no parameters
[ 0.118039] RTC time: 13:40:02, date: 08/27/17
[ 0.118106] NET: Registered protocol family 16
[ 0.118315] cpuidle: using governor ladder
[ 0.118318] cpuidle: using governor menu
[ 0.118325] node 0 link 0: io port [1000, fffff]
[ 0.118329] TOM: 0000000080000000 aka 2048M
[ 0.118332] node 0 link 0: mmio [e0000000, efffffff]
[ 0.118335] node 0 link 0: mmio [feb00000, fec0ffff]
[ 0.118338] node 0 link 0: mmio [a0000, bffff]
[ 0.118340] node 0 link 0: mmio [80000000, fed3ffff]
[ 0.118344] bus: [bus 00-ff] on node 0 link 0
[ 0.118345] bus: 00 [io 0x0000-0xffff]
[ 0.118347] bus: 00 [mem 0x80000000-0xfcffffffff]
[ 0.118349] bus: 00 [mem 0xfeb00000-0xfec0ffff]
[ 0.118351] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.118409] ACPI: bus type PCI registered
[ 0.118412] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.118508] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.118512] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.128709] PCI: Using configuration type 1 for base access
[ 0.130311] bio: create slab <bio-0> at 0
[ 0.130569] ACPI: Added _OSI(Module Device)
[ 0.130571] ACPI: Added _OSI(Processor Device)
[ 0.130573] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.130574] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.136457] ACPI: Interpreter enabled
[ 0.136472] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.136489] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.136491] ACPI: Using IOAPIC for interrupt routing
[ 0.136526] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.136701] ACPI: No dock devices found.
[ 0.146309] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.146320] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.146329] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.146415] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.146418] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.146421] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.146424] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.146427] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.146430] PCI: root bus 00: hardware-probed resources
[ 0.146764] PCI host bridge to bus 0000:00
[ 0.146769] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.146772] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.146774] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff]
[ 0.146777] pci_bus 0000:00: root bus resource [mem 0xfeb00000-0xfec0ffff]
[ 0.146780] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.146794] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[ 0.147005] pci 0000:00:01.0: [10de:0050] type 00 class 0x060100
[ 0.147027] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.147189] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[ 0.147198] pci 0000:00:01.1: reg 0x10: [io 0xe400-0xe41f]
[ 0.147211] pci 0000:00:01.1: reg 0x20: [io 0x4c00-0x4c3f]
[ 0.147217] pci 0000:00:01.1: reg 0x24: [io 0x4c40-0x4c7f]
[ 0.147232] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.147386] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[ 0.147395] pci 0000:00:02.0: reg 0x10: [mem 0xd6004000-0xd6004fff]
[ 0.147422] pci 0000:00:02.0: supports D1 D2
[ 0.147425] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.147533] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.147581] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[ 0.147590] pci 0000:00:02.1: reg 0x10: [mem 0xfeb00000-0xfeb000ff]
[ 0.147623] pci 0000:00:02.1: supports D1 D2
[ 0.147626] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.147746] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.147799] pci 0000:00:04.0: [10de:0059] type 00 class 0x040100
[ 0.147807] pci 0000:00:04.0: reg 0x10: [io 0xdc00-0xdcff]
[ 0.147812] pci 0000:00:04.0: reg 0x14: [io 0xe000-0xe0ff]
[ 0.147817] pci 0000:00:04.0: reg 0x18: [mem 0xd6003000-0xd6003fff]
[ 0.147839] pci 0000:00:04.0: supports D1 D2
[ 0.147981] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[ 0.148009] pci 0000:00:06.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.148166] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[ 0.148174] pci 0000:00:07.0: reg 0x10: [io 0x09f0-0x09f7]
[ 0.148179] pci 0000:00:07.0: reg 0x14: [io 0x0bf0-0x0bf3]
[ 0.148184] pci 0000:00:07.0: reg 0x18: [io 0x0970-0x0977]
[ 0.148189] pci 0000:00:07.0: reg 0x1c: [io 0x0b70-0x0b73]
[ 0.148194] pci 0000:00:07.0: reg 0x20: [io 0xd800-0xd80f]
[ 0.148199] pci 0000:00:07.0: reg 0x24: [mem 0xd6002000-0xd6002fff]
[ 0.148350] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[ 0.148358] pci 0000:00:08.0: reg 0x10: [io 0x09e0-0x09e7]
[ 0.148363] pci 0000:00:08.0: reg 0x14: [io 0x0be0-0x0be3]
[ 0.148368] pci 0000:00:08.0: reg 0x18: [io 0x0960-0x0967]
[ 0.148373] pci 0000:00:08.0: reg 0x1c: [io 0x0b60-0x0b63]
[ 0.148378] pci 0000:00:08.0: reg 0x20: [io 0xc400-0xc40f]
[ 0.148384] pci 0000:00:08.0: reg 0x24: [mem 0xd6001000-0xd6001fff]
[ 0.148532] pci 0000:00:09.0: [10de:005c] type 01 class 0x060401
[ 0.148648] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.148693] pci 0000:00:0a.0: [10de:0057] type 00 class 0x068000
[ 0.148701] pci 0000:00:0a.0: reg 0x10: [mem 0xd6000000-0xd6000fff]
[ 0.148706] pci 0000:00:0a.0: reg 0x14: [io 0xb000-0xb007]
[ 0.148731] pci 0000:00:0a.0: supports D1 D2
[ 0.148734] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.148840] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.148891] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[ 0.148920] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149028] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.149076] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[ 0.149104] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149215] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.149272] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[ 0.149300] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149408] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.149459] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[ 0.149486] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149594] pci 0000:00:0e.0: System wakeup disabled by ACPI
[ 0.149651] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.149793] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.149937] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.150082] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.150266] pci 0000:05:0a.0: [1095:3114] type 00 class 0x010400
[ 0.150277] pci 0000:05:0a.0: reg 0x10: [io 0x8000-0x8007]
[ 0.150285] pci 0000:05:0a.0: reg 0x14: [io 0x8400-0x8403]
[ 0.150292] pci 0000:05:0a.0: reg 0x18: [io 0x8800-0x8807]
[ 0.150299] pci 0000:05:0a.0: reg 0x1c: [io 0x8c00-0x8c03]
[ 0.150306] pci 0000:05:0a.0: reg 0x20: [io 0x9000-0x900f]
[ 0.150313] pci 0000:05:0a.0: reg 0x24: [mem 0xd5008000-0xd50083ff]
[ 0.150321] pci 0000:05:0a.0: reg 0x30: [mem 0xd4000000-0xd407ffff pref]
[ 0.150338] pci 0000:05:0a.0: supports D1 D2
[ 0.150383] pci 0000:05:0b.0: [104c:8023] type 00 class 0x0c0010
[ 0.150395] pci 0000:05:0b.0: reg 0x10: [mem 0xd5009000-0xd50097ff]
[ 0.150403] pci 0000:05:0b.0: reg 0x14: [mem 0xd5000000-0xd5003fff]
[ 0.150446] pci 0000:05:0b.0: supports D1 D2
[ 0.150448] pci 0000:05:0b.0: PME# supported from D0 D1 D2 D3hot
[ 0.150501] pci 0000:05:0c.0: [11ab:4320] type 00 class 0x020000
[ 0.150514] pci 0000:05:0c.0: reg 0x10: [mem 0xd5004000-0xd5007fff]
[ 0.150521] pci 0000:05:0c.0: reg 0x14: [io 0x9400-0x94ff]
[ 0.150547] pci 0000:05:0c.0: reg 0x30: [mem 0xd4000000-0xd401ffff pref]
[ 0.150570] pci 0000:05:0c.0: supports D1 D2
[ 0.150573] pci 0000:05:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.150631] pci 0000:00:09.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.150635] pci 0000:00:09.0: bridge window [io 0x8000-0x9fff]
[ 0.150638] pci 0000:00:09.0: bridge window [mem 0xd4000000-0xd5ffffff]
[ 0.150642] pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.150645] pci 0000:00:09.0: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[ 0.150648] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfec0ffff] (subtractive decode)
[ 0.150651] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.150690] pci 0000:00:0b.0: PCI bridge to [bus 04]
[ 0.150730] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 0.150770] pci 0000:00:0d.0: PCI bridge to [bus 02]
[ 0.150813] pci 0000:01:00.0: [10de:0640] type 00 class 0x030000
[ 0.150823] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 0.150833] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.150842] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit]
[ 0.150849] pci 0000:01:00.0: reg 0x24: [io 0xa000-0xa07f]
[ 0.150856] pci 0000:01:00.0: reg 0x30: [mem 0xd3000000-0xd307ffff pref]
[ 0.156019] pci 0000:00:0e.0: PCI bridge to [bus 01]
[ 0.156023] pci 0000:00:0e.0: bridge window [io 0xa000-0xafff]
[ 0.156026] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd3ffffff]
[ 0.156030] pci 0000:00:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.156254] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.156319] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.156382] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.156445] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.156507] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.156571] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.156633] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.156697] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.156768] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 0.156830] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.156894] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.156956] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 0.157023] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.157093] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.157167] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.157240] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.157332] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 0.157414] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.157496] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.157578] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.157628] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.157718] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.157808] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.157897] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.157985] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.158074] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.158163] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.158252] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.158341] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.158437] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.158532] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.158626] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.159468] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.159512] Found 1 acpi root devices
[ 0.159734] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.159737] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.159738] vgaarb: loaded
[ 0.159741] vgaarb: bridge control possible 0000:01:00.0
[ 0.160040] SCSI subsystem initialized
[ 0.160139] libata version 3.00 loaded.
[ 0.160167] ACPI: bus type USB registered
[ 0.160201] usbcore: registered new interface driver usbfs
[ 0.160212] usbcore: registered new interface driver hub
[ 0.160248] usbcore: registered new device driver usb
[ 0.160394] PCI: Using ACPI for IRQ routing
[ 0.165557] PCI: pci_cache_line_size set to 64 bytes
[ 0.165574] pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] conflicts with PCI Bus #00 [mem 0xfeb00000-0xfec0ffff]
[ 0.165612] Expanded resource reserved due to conflict with PCI Bus #00
[ 0.165615] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.165618] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[ 0.165765] NetLabel: Initializing
[ 0.165767] NetLabel: domain hash size = 128
[ 0.165769] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.165802] NetLabel: unlabeled traffic allowed by default
[ 0.165964] Switched to clocksource refined-jiffies
[ 0.177694] AppArmor: AppArmor Filesystem Enabled
[ 0.177778] pnp: PnP ACPI init
[ 0.177804] ACPI: bus type PNP registered
[ 0.178086] system 00:00: [io 0x4000-0x407f] has been reserved
[ 0.178090] system 00:00: [io 0x4080-0x40ff] has been reserved
[ 0.178093] system 00:00: [io 0x4400-0x447f] has been reserved
[ 0.178096] system 00:00: [io 0x4480-0x44ff] has been reserved
[ 0.178100] system 00:00: [io 0x4800-0x487f] has been reserved
[ 0.178103] system 00:00: [io 0x4880-0x48ff] has been reserved
[ 0.178109] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178780] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.178783] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.178786] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.178789] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178804] pnp 00:02: [dma 4]
[ 0.178836] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.178888] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.178925] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.178963] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.179149] pnp 00:06: [dma 2]
[ 0.179196] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.179494] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.180022] pnp 00:08: [dma 3]
[ 0.180077] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.180155] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.180427] pnp 00:0a: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.180663] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.180719] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.180723] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.180886] system 00:0d: [mem 0x000f0000-0x000f3fff] could not be reserved
[ 0.180889] system 00:0d: [mem 0x000f4000-0x000f7fff] could not be reserved
[ 0.180893] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.180896] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.180899] system 00:0d: [mem 0x7fff0000-0x7fffffff] could not be reserved
[ 0.180902] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.180906] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.180909] system 00:0d: [mem 0x00100000-0x7ffeffff] could not be reserved
[ 0.180912] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.180915] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.180919] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
[ 0.180922] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.180925] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.180928] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.180932] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.180943] pnp: PnP ACPI: found 14 devices
[ 0.180945] ACPI: bus type PNP unregistered
[ 0.187352] Switched to clocksource acpi_pm
[ 0.187366] pci 0000:05:0c.0: address space collision: [mem 0xd4000000-0xd401ffff pref] conflicts with 0000:05:0a.0 [mem 0xd4000000-0xd407ffff pref]
[ 0.187419] pci 0000:00:09.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref]
[ 0.187423] pci 0000:00:02.1: BAR 0: assigned [mem 0x80100000-0x801000ff]
[ 0.187430] pci 0000:05:0c.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
[ 0.187433] pci 0000:00:09.0: PCI bridge to [bus 05]
[ 0.187436] pci 0000:00:09.0: bridge window [io 0x8000-0x9fff]
[ 0.187440] pci 0000:00:09.0: bridge window [mem 0xd4000000-0xd5ffffff]
[ 0.187443] pci 0000:00:09.0: bridge window [mem 0x80000000-0x800fffff pref]
[ 0.187447] pci 0000:00:0b.0: PCI bridge to [bus 04]
[ 0.187453] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 0.187459] pci 0000:00:0d.0: PCI bridge to [bus 02]
[ 0.187465] pci 0000:00:0e.0: PCI bridge to [bus 01]
[ 0.187468] pci 0000:00:0e.0: bridge window [io 0xa000-0xafff]
[ 0.187471] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd3ffffff]
[ 0.187474] pci 0000:00:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.187479] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.187482] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.187485] pci_bus 0000:00: resource 6 [mem 0xfeb00000-0xfec0ffff]
[ 0.187487] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.187490] pci_bus 0000:05: resource 0 [io 0x8000-0x9fff]
[ 0.187493] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd5ffffff]
[ 0.187496] pci_bus 0000:05: resource 2 [mem 0x80000000-0x800fffff pref]
[ 0.187498] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.187501] pci_bus 0000:05: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.187504] pci_bus 0000:05: resource 6 [mem 0xfeb00000-0xfec0ffff]
[ 0.187506] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.187509] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.187512] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd3ffffff]
[ 0.187515] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.187589] NET: Registered protocol family 2
[ 0.187988] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.187988] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.187988] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.187988] TCP: reno registered
[ 0.187988] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.187988] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.187988] NET: Registered protocol family 1
[ 0.187988] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.260326] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.260488] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260495] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 0.260502] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260506] pci 0000:00:0b.0: Linking AER extended capability
[ 0.260541] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260547] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 0.260554] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260557] pci 0000:00:0c.0: Linking AER extended capability
[ 0.260595] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260600] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 0.260607] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260610] pci 0000:00:0d.0: Linking AER extended capability
[ 0.260651] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260657] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 0.260664] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260667] pci 0000:00:0e.0: Linking AER extended capability
[ 0.260696] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.260699] PCI: CLS 32 bytes, default 64
[ 0.260824] Trying to unpack rootfs image as initramfs...
[ 0.752755] Freeing initrd memory: 18836K (ffff880035b26000 - ffff880036d8b000)
[ 0.753269] microcode: AMD CPU family 0xf not supported
[ 0.753272] Scanning for low memory corruption every 60 seconds
[ 0.753662] Initialise system trusted keyring
[ 0.753731] audit: initializing netlink socket (disabled)
[ 0.753752] type=2000 audit(1503841202.751:1): initialized
[ 0.789109] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.791070] zbud: loaded
[ 0.791270] VFS: Disk quotas dquot_6.5.2
[ 0.791352] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.792224] fuse init (API version 7.22)
[ 0.792347] msgmni has been set to 3998
[ 0.792449] Key type big_key registered
[ 0.792853] Key type asymmetric registered
[ 0.792855] Asymmetric key parser 'x509' registered
[ 0.792911] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.792950] io scheduler noop registered
[ 0.792952] io scheduler deadline registered (default)
[ 0.793002] io scheduler cfq registered
[ 0.793178] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 0.793247] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 0.793296] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 0.793350] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[ 0.793412] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.793433] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.793491] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.793493] vesafb: scrolling: redraw
[ 0.793496] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.794098] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90010400000, using 5120k, total 5120k
[ 0.801012] Console: switching to colour frame buffer device 160x64
[ 0.807718] fb0: VESA VGA frame buffer device
[ 0.807760] ipmi message handler version 39.2
[ 0.807863] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.807870] ACPI: Power Button [PWRB]
[ 0.807929] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.807932] ACPI: Power Button [PWRF]
[ 0.807983] ACPI: Fan [FAN] (on)
[ 0.808570] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.808572] ACPI: Thermal Zone [THRM] (40 C)
[ 0.808661] GHES: HEST is not enabled!
[ 0.808803] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.829155] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.830780] Linux agpgart interface v0.103
[ 0.832705] brd: module loaded
[ 0.833681] loop: module loaded
[ 0.834322] libphy: Fixed MDIO Bus: probed
[ 0.834458] tun: Universal TUN/TAP device driver, 1.6
[ 0.834460] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.834512] PPP generic driver version 2.4.2
[ 0.834574] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.834579] ehci-pci: EHCI PCI platform driver
[ 0.834815] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 0.834826] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.834838] ehci-pci 0000:00:02.1: debug port 1
[ 0.834875] ehci-pci 0000:00:02.1: cache line size of 32 is not supported
[ 0.834904] ehci-pci 0000:00:02.1: irq 22, io mem 0x80100000
[ 0.844019] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.844099] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.844102] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.844105] usb usb1: Product: EHCI Host Controller
[ 0.844108] usb usb1: Manufacturer: Linux 3.13.0-128-generic ehci_hcd
[ 0.844110] usb usb1: SerialNumber: 0000:00:02.1
[ 0.844251] hub 1-0:1.0: USB hub found
[ 0.844267] hub 1-0:1.0: 10 ports detected
[ 0.844541] ehci-platform: EHCI generic platform driver
[ 0.844557] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.844558] ohci-pci: OHCI PCI platform driver
[ 0.844707] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 0.844715] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.844747] ohci-pci 0000:00:02.0: irq 23, io mem 0xd6004000
[ 0.902041] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.902044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.902047] usb usb2: Product: OHCI PCI host controller
[ 0.902049] usb usb2: Manufacturer: Linux 3.13.0-128-generic ohci_hcd
[ 0.902051] usb usb2: SerialNumber: 0000:00:02.0
[ 0.902177] hub 2-0:1.0: USB hub found
[ 0.902186] hub 2-0:1.0: 10 ports detected
[ 0.902418] ohci-platform: OHCI generic platform driver
[ 0.902430] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.902521] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.902523] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.903439] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.903584] mousedev: PS/2 mouse device common for all mice
[ 0.903726] rtc_cmos 00:03: RTC can wake from S4
[ 0.903863] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.903888] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram
[ 0.903992] device-mapper: uevent: version 1.0.3
[ 0.904126] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.904136] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.904283] TCP: cubic registered
[ 0.904406] NET: Registered protocol family 10
[ 0.904717] NET: Registered protocol family 17
[ 0.904735] Key type dns_resolver registered
[ 0.904988] Loading compiled-in X.509 certificates
[ 0.906355] Loaded X.509 cert 'Magrathea: Glacier signing key: 82aba0e9db7ab1f53299a7954028d1c1d66a6cf2'
[ 0.906376] registered taskstats version 1
[ 0.909947] Key type trusted registered
[ 0.916130] Key type encrypted registered
[ 0.916140] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.916143] IMA: No TPM chip found, activating TPM-bypass!
[ 0.916432] regulator-dummy: disabling
[ 0.916493] Magic number: 13:552:686
[ 0.916659] rtc_cmos 00:03: setting system clock to 2017-08-27 13:40:03 UTC (1503841203)
[ 0.921069] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[ 0.921071] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[ 0.921169] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.921171] EDD information not available.
[ 0.921218] PM: Hibernation image not present or could not be loaded.
[ 0.924460] Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000)
[ 0.924465] Write protecting the kernel read-only data: 12288k
[ 0.925693] Freeing unused kernel memory: 748K (ffff880001745000 - ffff880001800000)
[ 0.929133] Freeing unused kernel memory: 672K (ffff880001b58000 - ffff880001c00000)
[ 0.932798] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.952335] systemd-udevd[93]: starting version 204
[ 1.007873] Floppy drive(s): fd0 is 1.44M
[ 1.024070] FDC 0 is a post-1991 82077
[ 1.031270] pata_amd 0000:00:06.0: version 0.4.1
[ 1.037141] scsi0 : pata_amd
[ 1.040294] sata_sil 0000:05:0a.0: version 2.4
[ 1.040629] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 1.040677] sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix
[ 1.041183] scsi1 : pata_amd
[ 1.041244] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.041246] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.041429] sata_nv 0000:00:07.0: version 3.5
[ 1.041726] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 1.047610] scsi3 : sata_nv
[ 1.047745] scsi2 : sata_sil
[ 1.050931] scsi4 : sata_nv
[ 1.051009] ata7: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21
[ 1.051012] ata8: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21
[ 1.051444] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 1.051833] scsi5 : sata_sil
[ 1.055681] scsi7 : sata_sil
[ 1.055804] scsi6 : sata_nv
[ 1.058518] scsi9 : sata_nv
[ 1.058531] scsi8 : sata_sil
[ 1.058607] ata3: SATA max UDMA/100 mmio m1024@0xd5008000 tf 0xd5008080 irq 19
[ 1.058610] ata4: SATA max UDMA/100 mmio m1024@0xd5008000 tf 0xd50080c0 irq 19
[ 1.058613] ata5: SATA max UDMA/100 mmio m1024@0xd5008000 tf 0xd5008280 irq 19
[ 1.058616] ata6: SATA max UDMA/100 mmio m1024@0xd5008000 tf 0xd50082c0 irq 19
[ 1.058986] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 1.059055] skge: 1.14 addr 0xd5004000 irq 17 chip Yukon-Lite rev 9
[ 1.059284] skge 0000:05:0c.0 eth0: addr 00:13:d4:ea:dd:2c
[ 1.059397] ata9: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 20
[ 1.059401] ata10: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 20
[ 1.059649] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.059933] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 1.076458] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 1.132151] firewire_ohci 0000:05:0b.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.212423] ata1.01: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
[ 1.212429] ata1.01: 240121728 sectors, multi 1: LBA
[ 1.212439] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 1.228332] ata1.01: configured for UDMA/133
[ 1.228479] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5
[ 1.228927] sd 0:0:1:0: [sda] 240121728 512-byte logical blocks: (122 GB/114 GiB)
[ 1.228998] sd 0:0:1:0: [sda] Write Protect is off
[ 1.229002] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.229032] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.229605] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 1.360022] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.373965] sda: sda2 sda3
[ 1.374436] sd 0:0:1:0: [sda] Attached SCSI disk
[ 1.376091] ata3: SATA link down (SStatus 0 SControl 310)
[ 1.400245] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
[ 1.400251] ata2.01: ATAPI: TSSTcorpCD-R/RW SH-R522C, TS03, max UDMA/33
[ 1.400259] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc7c0c0) ACPI=0x701f (60:60:0x1f)
[ 1.400263] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc7c0c0) ACPI=0x701f (60:60:0x1f)
[ 1.412021] usb 2-2: new low-speed USB device number 2 using ohci-pci
[ 1.416173] ata2.00: configured for UDMA/33
[ 1.424199] ata2.01: configured for UDMA/33
[ 1.430612] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
[ 1.437051] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.437054] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.437513] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.437645] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.441076] scsi 1:0:1:0: CD-ROM TSSTcorp CD-R/RW SH-R522C TS03 PQ: 0 ANSI: 5
[ 1.443737] sr1: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 1.444198] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 1.444456] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 1.532038] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.540110] ata9.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/100
[ 1.540113] ata9.00: 488397168 sectors, multi 1: LBA48 NCQ (not used)
[ 1.556102] ata9.00: configured for UDMA/100
[ 1.584541] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:13:d4:ea:d1:74
[ 1.584545] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 1.625086] usb 2-2: New USB device found, idVendor=046d, idProduct=c016
[ 1.625092] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.625094] usb 2-2: Product: Optical USB Mouse
[ 1.625097] usb 2-2: Manufacturer: Logitech
[ 1.632223] firewire_core 0000:05:0b.0: created device fw0: GUID 0011d800006a6978, S400
[ 1.633726] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.643680] usbcore: registered new interface driver usbhid
[ 1.643686] usbhid: USB HID core driver
[ 1.646887] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input3
[ 1.647938] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-2/input0
[ 1.756029] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.076030] ata4: SATA link down (SStatus 0 SControl 310)
[ 2.396024] ata5: SATA link down (SStatus 0 SControl 310)
[ 2.716029] ata6: SATA link down (SStatus 0 SControl 310)
[ 2.716188] scsi 6:0:0:0: Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 ANSI: 5
[ 2.716428] sd 6:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.716497] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.716500] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.716529] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.716846] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 2.803870] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
[ 2.804428] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 3.184040] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.192223] ata10.00: ATA-7: SAMSUNG HD400LJ, ZZ100-14, max UDMA7
[ 3.192227] ata10.00: 781422768 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 3.208195] ata10.00: configured for UDMA/133
[ 3.208326] scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD400LJ ZZ10 PQ: 0 ANSI: 5
[ 3.208588] sd 9:0:0:0: [sdc] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 3.208659] sd 9:0:0:0: [sdc] Write Protect is off
[ 3.208662] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.208691] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.209031] sd 9:0:0:0: Attached scsi generic sg4 type 0
[ 3.256942] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 >
[ 3.257436] sd 9:0:0:0: [sdc] Attached SCSI disk
[ 3.475605] random: nonblocking pool is initialized
[ 3.904350] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[ 4.736597] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 4.736602] ata1.01: BMDMA stat 0x64
[ 4.736606] ata1.01: failed command: READ DMA
[ 4.736613] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 4.736613] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 4.736616] ata1.01: status: { DRDY ERR }
[ 4.736618] ata1.01: error: { UNC }
[ 4.744344] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 4.760329] ata1.01: configured for UDMA/133
[ 4.760347] sd 0:0:1:0: [sda]
[ 4.760350] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4.760352] sd 0:0:1:0: [sda]
[ 4.760354] Sense Key : Medium Error [current] [descriptor]
[ 4.760357] Descriptor sense data with sense descriptors (in hex):
[ 4.760359] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 4.760368] 00 00 00 08
[ 4.760373] sd 0:0:1:0: [sda]
[ 4.760377] Add. Sense: Unrecovered read error - auto reallocate failed
[ 4.760380] sd 0:0:1:0: [sda] CDB:
[ 4.760381] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 4.760389] end_request: I/O error, dev sda, sector 8
[ 4.760393] Buffer I/O error on device sda, logical block 1
[ 4.760409] ata1: EH complete
[ 6.089936] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 6.089939] ata1.01: BMDMA stat 0x64
[ 6.089941] ata1.01: failed command: READ DMA
[ 6.089947] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 6.089947] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 6.089949] ata1.01: status: { DRDY ERR }
[ 6.089951] ata1.01: error: { UNC }
[ 6.096333] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 6.112328] ata1.01: configured for UDMA/133
[ 6.112333] sd 0:0:1:0: [sda]
[ 6.112335] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 6.112337] sd 0:0:1:0: [sda]
[ 6.112339] Sense Key : Medium Error [current] [descriptor]
[ 6.112341] Descriptor sense data with sense descriptors (in hex):
[ 6.112342] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 6.112351] 00 00 00 08
[ 6.112356] sd 0:0:1:0: [sda]
[ 6.112358] Add. Sense: Unrecovered read error - auto reallocate failed
[ 6.112360] sd 0:0:1:0: [sda] CDB:
[ 6.112361] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 6.112368] end_request: I/O error, dev sda, sector 8
[ 6.112370] Buffer I/O error on device sda, logical block 1
[ 6.112377] ata1: EH complete
[ 7.476556] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 7.476558] ata1.01: BMDMA stat 0x64
[ 7.476561] ata1.01: failed command: READ DMA
[ 7.476567] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 7.476567] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 7.476570] ata1.01: status: { DRDY ERR }
[ 7.476572] ata1.01: error: { UNC }
[ 7.484335] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 7.500329] ata1.01: configured for UDMA/133
[ 7.500336] sd 0:0:1:0: [sda]
[ 7.500338] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.500340] sd 0:0:1:0: [sda]
[ 7.500341] Sense Key : Medium Error [current] [descriptor]
[ 7.500344] Descriptor sense data with sense descriptors (in hex):
[ 7.500345] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 7.500354] 00 00 00 08
[ 7.500359] sd 0:0:1:0: [sda]
[ 7.500361] Add. Sense: Unrecovered read error - auto reallocate failed
[ 7.500363] sd 0:0:1:0: [sda] CDB:
[ 7.500365] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 7.500372] end_request: I/O error, dev sda, sector 8
[ 7.500374] Buffer I/O error on device sda, logical block 1
[ 7.500380] ata1: EH complete
[ 8.829891] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8.829893] ata1.01: BMDMA stat 0x64
[ 8.829896] ata1.01: failed command: READ DMA
[ 8.829901] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 8.829901] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 8.829904] ata1.01: status: { DRDY ERR }
[ 8.829906] ata1.01: error: { UNC }
[ 8.836334] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 8.852328] ata1.01: configured for UDMA/133
[ 8.852333] sd 0:0:1:0: [sda]
[ 8.852335] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8.852337] sd 0:0:1:0: [sda]
[ 8.852339] Sense Key : Medium Error [current] [descriptor]
[ 8.852341] Descriptor sense data with sense descriptors (in hex):
[ 8.852342] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 8.852351] 00 00 00 08
[ 8.852356] sd 0:0:1:0: [sda]
[ 8.852358] Add. Sense: Unrecovered read error - auto reallocate failed
[ 8.852360] sd 0:0:1:0: [sda] CDB:
[ 8.852361] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 8.852368] end_request: I/O error, dev sda, sector 8
[ 8.852370] Buffer I/O error on device sda, logical block 1
[ 8.852377] ata1: EH complete
[ 10.191594] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 10.191596] ata1.01: BMDMA stat 0x64
[ 10.191598] ata1.01: failed command: READ DMA
[ 10.191604] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 10.191604] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 10.191607] ata1.01: status: { DRDY ERR }
[ 10.191609] ata1.01: error: { UNC }
[ 10.196343] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 10.212338] ata1.01: configured for UDMA/133
[ 10.212344] sd 0:0:1:0: [sda]
[ 10.212346] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 10.212348] sd 0:0:1:0: [sda]
[ 10.212350] Sense Key : Medium Error [current] [descriptor]
[ 10.212352] Descriptor sense data with sense descriptors (in hex):
[ 10.212353] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 10.212362] 00 00 00 08
[ 10.212367] sd 0:0:1:0: [sda]
[ 10.212369] Add. Sense: Unrecovered read error - auto reallocate failed
[ 10.212371] sd 0:0:1:0: [sda] CDB:
[ 10.212373] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 10.212379] end_request: I/O error, dev sda, sector 8
[ 10.212382] Buffer I/O error on device sda, logical block 1
[ 10.212388] ata1: EH complete
[ 11.544953] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 11.544955] ata1.01: BMDMA stat 0x64
[ 11.544957] ata1.01: failed command: READ DMA
[ 11.544963] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 11.544963] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 11.544966] ata1.01: status: { DRDY ERR }
[ 11.544967] ata1.01: error: { UNC }
[ 11.552350] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 11.568345] ata1.01: configured for UDMA/133
[ 11.568351] sd 0:0:1:0: [sda]
[ 11.568352] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 11.568355] sd 0:0:1:0: [sda]
[ 11.568356] Sense Key : Medium Error [current] [descriptor]
[ 11.568358] Descriptor sense data with sense descriptors (in hex):
[ 11.568360] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 11.568369] 00 00 00 08
[ 11.568373] sd 0:0:1:0: [sda]
[ 11.568375] Add. Sense: Unrecovered read error - auto reallocate failed
[ 11.568378] sd 0:0:1:0: [sda] CDB:
[ 11.568379] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 11.568385] end_request: I/O error, dev sda, sector 8
[ 11.568387] Buffer I/O error on device sda, logical block 1
[ 11.568394] ata1: EH complete
[ 12.898330] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 12.898332] ata1.01: BMDMA stat 0x64
[ 12.898335] ata1.01: failed command: READ DMA
[ 12.898341] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 12.898341] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 12.898343] ata1.01: status: { DRDY ERR }
[ 12.898345] ata1.01: error: { UNC }
[ 12.904334] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 12.920329] ata1.01: configured for UDMA/133
[ 12.920334] sd 0:0:1:0: [sda]
[ 12.920336] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 12.920338] sd 0:0:1:0: [sda]
[ 12.920340] Sense Key : Medium Error [current] [descriptor]
[ 12.920342] Descriptor sense data with sense descriptors (in hex):
[ 12.920343] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.920353] 00 00 00 08
[ 12.920357] sd 0:0:1:0: [sda]
[ 12.920359] Add. Sense: Unrecovered read error - auto reallocate failed
[ 12.920362] sd 0:0:1:0: [sda] CDB:
[ 12.920363] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 12.920369] end_request: I/O error, dev sda, sector 8
[ 12.920372] Buffer I/O error on device sda, logical block 1
[ 12.920378] ata1: EH complete
[ 14.251702] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 14.251704] ata1.01: BMDMA stat 0x64
[ 14.251706] ata1.01: failed command: READ DMA
[ 14.251712] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 14.251712] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 14.251715] ata1.01: status: { DRDY ERR }
[ 14.251717] ata1.01: error: { UNC }
[ 14.256332] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 14.272326] ata1.01: configured for UDMA/133
[ 14.272332] sd 0:0:1:0: [sda]
[ 14.272334] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 14.272336] sd 0:0:1:0: [sda]
[ 14.272337] Sense Key : Medium Error [current] [descriptor]
[ 14.272340] Descriptor sense data with sense descriptors (in hex):
[ 14.272341] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 14.272350] 00 00 00 08
[ 14.272355] sd 0:0:1:0: [sda]
[ 14.272357] Add. Sense: Unrecovered read error - auto reallocate failed
[ 14.272359] sd 0:0:1:0: [sda] CDB:
[ 14.272360] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 14.272367] end_request: I/O error, dev sda, sector 8
[ 14.272369] Buffer I/O error on device sda, logical block 1
[ 14.272375] ata1: EH complete
[ 15.613359] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 15.613361] ata1.01: BMDMA stat 0x64
[ 15.613363] ata1.01: failed command: READ DMA
[ 15.613369] ata1.01: cmd c8/00:08:18:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 15.613369] res 51/40:00:19:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 15.613372] ata1.01: status: { DRDY ERR }
[ 15.613373] ata1.01: error: { UNC }
[ 15.620332] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 15.636327] ata1.01: configured for UDMA/133
[ 15.636333] sd 0:0:1:0: [sda]
[ 15.636334] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 15.636337] sd 0:0:1:0: [sda]
[ 15.636338] Sense Key : Medium Error [current] [descriptor]
[ 15.636340] Descriptor sense data with sense descriptors (in hex):
[ 15.636342] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 15.636351] 00 00 00 19
[ 15.636355] sd 0:0:1:0: [sda]
[ 15.636357] Add. Sense: Unrecovered read error - auto reallocate failed
[ 15.636360] sd 0:0:1:0: [sda] CDB:
[ 15.636361] Read(10): 28 00 00 00 00 18 00 00 08 00
[ 15.636368] end_request: I/O error, dev sda, sector 25
[ 15.636370] Buffer I/O error on device sda, logical block 3
[ 15.636376] ata1: EH complete
[ 16.975041] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 16.975043] ata1.01: BMDMA stat 0x64
[ 16.975045] ata1.01: failed command: READ DMA
[ 16.975051] ata1.01: cmd c8/00:08:18:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 16.975051] res 51/40:00:19:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 16.975054] ata1.01: status: { DRDY ERR }
[ 16.975055] ata1.01: error: { UNC }
[ 16.980335] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 16.996315] ata1.01: configured for UDMA/133
[ 16.996321] sd 0:0:1:0: [sda]
[ 16.996323] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 16.996325] sd 0:0:1:0: [sda]
[ 16.996326] Sense Key : Medium Error [current] [descriptor]
[ 16.996329] Descriptor sense data with sense descriptors (in hex):
[ 16.996330] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 16.996339] 00 00 00 19
[ 16.996344] sd 0:0:1:0: [sda]
[ 16.996346] Add. Sense: Unrecovered read error - auto reallocate failed
[ 16.996348] sd 0:0:1:0: [sda] CDB:
[ 16.996350] Read(10): 28 00 00 00 00 18 00 00 08 00
[ 16.996356] end_request: I/O error, dev sda, sector 25
[ 16.996358] Buffer I/O error on device sda, logical block 3
[ 16.996364] ata1: EH complete
[ 18.336682] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 18.336684] ata1.01: BMDMA stat 0x64
[ 18.336686] ata1.01: failed command: READ DMA
[ 18.336692] ata1.01: cmd c8/00:08:18:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 18.336692] res 51/40:00:19:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 18.336695] ata1.01: status: { DRDY ERR }
[ 18.336696] ata1.01: error: { UNC }
[ 18.344330] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 18.360323] ata1.01: configured for UDMA/133
[ 18.360329] sd 0:0:1:0: [sda]
[ 18.360330] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 18.360333] sd 0:0:1:0: [sda]
[ 18.360334] Sense Key : Medium Error [current] [descriptor]
[ 18.360336] Descriptor sense data with sense descriptors (in hex):
[ 18.360338] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 18.360347] 00 00 00 19
[ 18.360351] sd 0:0:1:0: [sda]
[ 18.360353] Add. Sense: Unrecovered read error - auto reallocate failed
[ 18.360356] sd 0:0:1:0: [sda] CDB:
[ 18.360357] Read(10): 28 00 00 00 00 18 00 00 08 00
[ 18.360363] end_request: I/O error, dev sda, sector 25
[ 18.360366] Buffer I/O error on device sda, logical block 3
[ 18.360372] ata1: EH complete
[ 19.698381] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 19.698383] ata1.01: BMDMA stat 0x64
[ 19.698386] ata1.01: failed command: READ DMA
[ 19.698391] ata1.01: cmd c8/00:08:18:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 19.698391] res 51/40:00:19:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 19.698394] ata1.01: status: { DRDY ERR }
[ 19.698396] ata1.01: error: { UNC }
[ 19.704346] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 19.720342] ata1.01: configured for UDMA/133
[ 19.720347] sd 0:0:1:0: [sda]
[ 19.720349] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 19.720351] sd 0:0:1:0: [sda]
[ 19.720353] Sense Key : Medium Error [current] [descriptor]
[ 19.720355] Descriptor sense data with sense descriptors (in hex):
[ 19.720356] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 19.720365] 00 00 00 19
[ 19.720370] sd 0:0:1:0: [sda]
[ 19.720372] Add. Sense: Unrecovered read error - auto reallocate failed
[ 19.720374] sd 0:0:1:0: [sda] CDB:
[ 19.720375] Read(10): 28 00 00 00 00 18 00 00 08 00
[ 19.720382] end_request: I/O error, dev sda, sector 25
[ 19.720384] Buffer I/O error on device sda, logical block 3
[ 19.720390] ata1: EH complete
[ 21.051753] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 21.051755] ata1.01: BMDMA stat 0x64
[ 21.051757] ata1.01: failed command: READ DMA
[ 21.051763] ata1.01: cmd c8/00:08:38:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 21.051763] res 51/40:00:38:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 21.051766] ata1.01: status: { DRDY ERR }
[ 21.051768] ata1.01: error: { UNC }
[ 21.056332] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 21.072328] ata1.01: configured for UDMA/133
[ 21.072334] sd 0:0:1:0: [sda]
[ 21.072335] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 21.072338] sd 0:0:1:0: [sda]
[ 21.072339] Sense Key : Medium Error [current] [descriptor]
[ 21.072342] Descriptor sense data with sense descriptors (in hex):
[ 21.072343] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 21.072352] 00 00 00 38
[ 21.072356] sd 0:0:1:0: [sda]
[ 21.072358] Add. Sense: Unrecovered read error - auto reallocate failed
[ 21.072361] sd 0:0:1:0: [sda] CDB:
[ 21.072362] Read(10): 28 00 00 00 00 38 00 00 08 00
[ 21.072369] end_request: I/O error, dev sda, sector 56
[ 21.072371] Buffer I/O error on device sda, logical block 7
[ 21.072377] ata1: EH complete
[ 22.405109] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 22.405111] ata1.01: BMDMA stat 0x64
[ 22.405114] ata1.01: failed command: READ DMA
[ 22.405119] ata1.01: cmd c8/00:08:38:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 22.405119] res 51/40:00:38:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 22.405122] ata1.01: status: { DRDY ERR }
[ 22.405124] ata1.01: error: { UNC }
[ 22.412335] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 22.428330] ata1.01: configured for UDMA/133
[ 22.428336] sd 0:0:1:0: [sda]
[ 22.428337] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 22.428340] sd 0:0:1:0: [sda]
[ 22.428341] Sense Key : Medium Error [current] [descriptor]
[ 22.428343] Descriptor sense data with sense descriptors (in hex):
[ 22.428345] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 22.428354] 00 00 00 38
[ 22.428358] sd 0:0:1:0: [sda]
[ 22.428360] Add. Sense: Unrecovered read error - auto reallocate failed
[ 22.428363] sd 0:0:1:0: [sda] CDB:
[ 22.428364] Read(10): 28 00 00 00 00 38 00 00 08 00
[ 22.428371] end_request: I/O error, dev sda, sector 56
[ 22.428373] Buffer I/O error on device sda, logical block 7
[ 22.428379] ata1: EH complete
[ 23.758488] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 23.758490] ata1.01: BMDMA stat 0x64
[ 23.758493] ata1.01: failed command: READ DMA
[ 23.758499] ata1.01: cmd c8/00:08:38:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 23.758499] res 51/40:00:38:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 23.758501] ata1.01: status: { DRDY ERR }
[ 23.758503] ata1.01: error: { UNC }
[ 23.764329] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 23.780324] ata1.01: configured for UDMA/133
[ 23.780330] sd 0:0:1:0: [sda]
[ 23.780331] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 23.780334] sd 0:0:1:0: [sda]
[ 23.780335] Sense Key : Medium Error [current] [descriptor]
[ 23.780337] Descriptor sense data with sense descriptors (in hex):
[ 23.780339] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 23.780348] 00 00 00 38
[ 23.780352] sd 0:0:1:0: [sda]
[ 23.780354] Add. Sense: Unrecovered read error - auto reallocate failed
[ 23.780357] sd 0:0:1:0: [sda] CDB:
[ 23.780358] Read(10): 28 00 00 00 00 38 00 00 08 00
[ 23.780365] end_request: I/O error, dev sda, sector 56
[ 23.780367] Buffer I/O error on device sda, logical block 7
[ 23.780373] ata1: EH complete
[ 25.111854] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 25.111856] ata1.01: BMDMA stat 0x64
[ 25.111859] ata1.01: failed command: READ DMA
[ 25.111864] ata1.01: cmd c8/00:08:38:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 25.111864] res 51/40:00:38:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 25.111867] ata1.01: status: { DRDY ERR }
[ 25.111869] ata1.01: error: { UNC }
[ 25.116346] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 25.132341] ata1.01: configured for UDMA/133
[ 25.132346] sd 0:0:1:0: [sda]
[ 25.132348] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 25.132350] sd 0:0:1:0: [sda]
[ 25.132352] Sense Key : Medium Error [current] [descriptor]
[ 25.132354] Descriptor sense data with sense descriptors (in hex):
[ 25.132355] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 25.132364] 00 00 00 38
[ 25.132369] sd 0:0:1:0: [sda]
[ 25.132371] Add. Sense: Unrecovered read error - auto reallocate failed
[ 25.132373] sd 0:0:1:0: [sda] CDB:
[ 25.132375] Read(10): 28 00 00 00 00 38 00 00 08 00
[ 25.132381] end_request: I/O error, dev sda, sector 56
[ 25.132383] Buffer I/O error on device sda, logical block 7
[ 25.132390] ata1: EH complete
[ 26.473497] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 26.473499] ata1.01: BMDMA stat 0x64
[ 26.473502] ata1.01: failed command: READ DMA
[ 26.473507] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 26.473507] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 26.473510] ata1.01: status: { DRDY ERR }
[ 26.473512] ata1.01: error: { UNC }
[ 26.480350] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 26.496346] ata1.01: configured for UDMA/133
[ 26.496351] sd 0:0:1:0: [sda]
[ 26.496353] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 26.496355] sd 0:0:1:0: [sda]
[ 26.496357] Sense Key : Medium Error [current] [descriptor]
[ 26.496359] Descriptor sense data with sense descriptors (in hex):
[ 26.496360] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 26.496369] 00 00 00 08
[ 26.496374] sd 0:0:1:0: [sda]
[ 26.496376] Add. Sense: Unrecovered read error - auto reallocate failed
[ 26.496378] sd 0:0:1:0: [sda] CDB:
[ 26.496380] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 26.496386] end_request: I/O error, dev sda, sector 8
[ 26.496388] Buffer I/O error on device sda, logical block 1
[ 26.496395] ata1: EH complete
[ 27.826889] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 27.826892] ata1.01: BMDMA stat 0x64
[ 27.826894] ata1.01: failed command: READ DMA
[ 27.826900] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 27.826900] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 27.826902] ata1.01: status: { DRDY ERR }
[ 27.826904] ata1.01: error: { UNC }
[ 27.832336] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 27.848328] ata1.01: configured for UDMA/133
[ 27.848333] sd 0:0:1:0: [sda]
[ 27.848335] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 27.848337] sd 0:0:1:0: [sda]
[ 27.848339] Sense Key : Medium Error [current] [descriptor]
[ 27.848341] Descriptor sense data with sense descriptors (in hex):
[ 27.848342] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 27.848351] 00 00 00 08
[ 27.848356] sd 0:0:1:0: [sda]
[ 27.848358] Add. Sense: Unrecovered read error - auto reallocate failed
[ 27.848360] sd 0:0:1:0: [sda] CDB:
[ 27.848362] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 27.848368] end_request: I/O error, dev sda, sector 8
[ 27.848370] Buffer I/O error on device sda, logical block 1
[ 27.848377] ata1: EH complete
[ 29.188527] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 29.188529] ata1.01: BMDMA stat 0x64
[ 29.188531] ata1.01: failed command: READ DMA
[ 29.188537] ata1.01: cmd c8/00:08:18:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 29.188537] res 51/40:00:19:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 29.188540] ata1.01: status: { DRDY ERR }
[ 29.188542] ata1.01: error: { UNC }
[ 29.196335] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 29.212332] ata1.01: configured for UDMA/133
[ 29.212338] sd 0:0:1:0: [sda]
[ 29.212340] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 29.212342] sd 0:0:1:0: [sda]
[ 29.212343] Sense Key : Medium Error [current] [descriptor]
[ 29.212345] Descriptor sense data with sense descriptors (in hex):
[ 29.212347] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 29.212356] 00 00 00 19
[ 29.212360] sd 0:0:1:0: [sda]
[ 29.212362] Add. Sense: Unrecovered read error - auto reallocate failed
[ 29.212365] sd 0:0:1:0: [sda] CDB:
[ 29.212366] Read(10): 28 00 00 00 00 18 00 00 08 00
[ 29.212373] end_request: I/O error, dev sda, sector 25
[ 29.212375] Buffer I/O error on device sda, logical block 3
[ 29.212381] ata1: EH complete
[ 30.550225] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 30.550227] ata1.01: BMDMA stat 0x64
[ 30.550229] ata1.01: failed command: READ DMA
[ 30.550235] ata1.01: cmd c8/00:08:18:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 30.550235] res 51/40:00:19:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 30.550238] ata1.01: status: { DRDY ERR }
[ 30.550240] ata1.01: error: { UNC }
[ 30.556329] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 30.572323] ata1.01: configured for UDMA/133
[ 30.572328] sd 0:0:1:0: [sda]
[ 30.572330] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 30.572332] sd 0:0:1:0: [sda]
[ 30.572334] Sense Key : Medium Error [current] [descriptor]
[ 30.572336] Descriptor sense data with sense descriptors (in hex):
[ 30.572338] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 30.572347] 00 00 00 19
[ 30.572351] sd 0:0:1:0: [sda]
[ 30.572353] Add. Sense: Unrecovered read error - auto reallocate failed
[ 30.572356] sd 0:0:1:0: [sda] CDB:
[ 30.572357] Read(10): 28 00 00 00 00 18 00 00 08 00
[ 30.572363] end_request: I/O error, dev sda, sector 25
[ 30.572365] Buffer I/O error on device sda, logical block 3
[ 30.572372] ata1: EH complete
[ 31.903595] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 31.903597] ata1.01: BMDMA stat 0x64
[ 31.903599] ata1.01: failed command: READ DMA
[ 31.903605] ata1.01: cmd c8/00:08:38:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 31.903605] res 51/40:00:38:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 31.903608] ata1.01: status: { DRDY ERR }
[ 31.903610] ata1.01: error: { UNC }
[ 31.908344] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 31.924340] ata1.01: configured for UDMA/133
[ 31.924345] sd 0:0:1:0: [sda]
[ 31.924347] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 31.924349] sd 0:0:1:0: [sda]
[ 31.924351] Sense Key : Medium Error [current] [descriptor]
[ 31.924353] Descriptor sense data with sense descriptors (in hex):
[ 31.924354] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 31.924364] 00 00 00 38
[ 31.924368] sd 0:0:1:0: [sda]
[ 31.924370] Add. Sense: Unrecovered read error - auto reallocate failed
[ 31.924372] sd 0:0:1:0: [sda] CDB:
[ 31.924374] Read(10): 28 00 00 00 00 38 00 00 08 00
[ 31.924380] end_request: I/O error, dev sda, sector 56
[ 31.924382] Buffer I/O error on device sda, logical block 7
[ 31.924389] ata1: EH complete
[ 33.256931] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 33.256933] ata1.01: BMDMA stat 0x64
[ 33.256935] ata1.01: failed command: READ DMA
[ 33.256941] ata1.01: cmd c8/00:08:38:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 33.256941] res 51/40:00:38:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 33.256944] ata1.01: status: { DRDY ERR }
[ 33.256946] ata1.01: error: { UNC }
[ 33.264346] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 33.280342] ata1.01: configured for UDMA/133
[ 33.280348] sd 0:0:1:0: [sda]
[ 33.280349] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 33.280352] sd 0:0:1:0: [sda]
[ 33.280353] Sense Key : Medium Error [current] [descriptor]
[ 33.280355] Descriptor sense data with sense descriptors (in hex):
[ 33.280357] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 33.280366] 00 00 00 38
[ 33.280370] sd 0:0:1:0: [sda]
[ 33.280372] Add. Sense: Unrecovered read error - auto reallocate failed
[ 33.280375] sd 0:0:1:0: [sda] CDB:
[ 33.280376] Read(10): 28 00 00 00 00 38 00 00 08 00
[ 33.280383] end_request: I/O error, dev sda, sector 56
[ 33.280385] Buffer I/O error on device sda, logical block 7
[ 33.280391] ata1: EH complete
[ 34.610343] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 34.610349] ata1.01: BMDMA stat 0x64
[ 34.610353] ata1.01: failed command: READ DMA
[ 34.610360] ata1.01: cmd c8/00:08:10:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 34.610360] res 51/40:00:10:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 34.610363] ata1.01: status: { DRDY ERR }
[ 34.610365] ata1.01: error: { UNC }
[ 34.616352] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 34.632332] ata1.01: configured for UDMA/133
[ 34.632348] sd 0:0:1:0: [sda]
[ 34.632350] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 34.632353] sd 0:0:1:0: [sda]
[ 34.632355] Sense Key : Medium Error [current] [descriptor]
[ 34.632358] Descriptor sense data with sense descriptors (in hex):
[ 34.632360] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 34.632369] 00 00 00 10
[ 34.632373] sd 0:0:1:0: [sda]
[ 34.632377] Add. Sense: Unrecovered read error - auto reallocate failed
[ 34.632380] sd 0:0:1:0: [sda] CDB:
[ 34.632381] Read(10): 28 00 00 00 00 10 00 00 08 00
[ 34.632388] end_request: I/O error, dev sda, sector 16
[ 34.632392] Buffer I/O error on device sda, logical block 2
[ 34.632404] ata1: EH complete
[ 35.972035] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 35.972041] ata1.01: BMDMA stat 0x64
[ 35.972045] ata1.01: failed command: READ DMA
[ 35.972052] ata1.01: cmd c8/00:08:10:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 35.972052] res 51/40:00:10:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 35.972056] ata1.01: status: { DRDY ERR }
[ 35.972058] ata1.01: error: { UNC }
[ 35.980367] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 35.996346] ata1.01: configured for UDMA/133
[ 35.996369] sd 0:0:1:0: [sda]
[ 35.996371] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 35.996373] sd 0:0:1:0: [sda]
[ 35.996375] Sense Key : Medium Error [current] [descriptor]
[ 35.996379] Descriptor sense data with sense descriptors (in hex):
[ 35.996380] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 35.996389] 00 00 00 10
[ 35.996394] sd 0:0:1:0: [sda]
[ 35.996397] Add. Sense: Unrecovered read error - auto reallocate failed
[ 35.996400] sd 0:0:1:0: [sda] CDB:
[ 35.996402] Read(10): 28 00 00 00 00 10 00 00 08 00
[ 35.996409] end_request: I/O error, dev sda, sector 16
[ 35.996413] Buffer I/O error on device sda, logical block 2
[ 35.996426] ata1: EH complete
[ 37.325358] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 37.325364] ata1.01: BMDMA stat 0x64
[ 37.325368] ata1.01: failed command: READ DMA
[ 37.325375] ata1.01: cmd c8/00:08:40:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 37.325375] res 51/40:00:40:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 37.325378] ata1.01: status: { DRDY ERR }
[ 37.325380] ata1.01: error: { UNC }
[ 37.332360] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 37.348329] ata1.01: configured for UDMA/133
[ 37.348345] sd 0:0:1:0: [sda]
[ 37.348347] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 37.348350] sd 0:0:1:0: [sda]
[ 37.348352] Sense Key : Medium Error [current] [descriptor]
[ 37.348355] Descriptor sense data with sense descriptors (in hex):
[ 37.348357] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 37.348365] 00 00 00 40
[ 37.348370] sd 0:0:1:0: [sda]
[ 37.348374] Add. Sense: Unrecovered read error - auto reallocate failed
[ 37.348377] sd 0:0:1:0: [sda] CDB:
[ 37.348378] Read(10): 28 00 00 00 00 40 00 00 08 00
[ 37.348386] end_request: I/O error, dev sda, sector 64
[ 37.348389] Buffer I/O error on device sda, logical block 8
[ 37.348401] ata1: EH complete
[ 38.678750] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 38.678756] ata1.01: BMDMA stat 0x64
[ 38.678760] ata1.01: failed command: READ DMA
[ 38.678767] ata1.01: cmd c8/00:08:40:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 38.678767] res 51/40:00:40:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 38.678770] ata1.01: status: { DRDY ERR }
[ 38.678772] ata1.01: error: { UNC }
[ 38.684351] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 38.700336] ata1.01: configured for UDMA/133
[ 38.700352] sd 0:0:1:0: [sda]
[ 38.700354] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 38.700357] sd 0:0:1:0: [sda]
[ 38.700359] Sense Key : Medium Error [current] [descriptor]
[ 38.700362] Descriptor sense data with sense descriptors (in hex):
[ 38.700364] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 38.700373] 00 00 00 40
[ 38.700377] sd 0:0:1:0: [sda]
[ 38.700381] Add. Sense: Unrecovered read error - auto reallocate failed
[ 38.700384] sd 0:0:1:0: [sda] CDB:
[ 38.700386] Read(10): 28 00 00 00 00 40 00 00 08 00
[ 38.700393] end_request: I/O error, dev sda, sector 64
[ 38.700397] Buffer I/O error on device sda, logical block 8
[ 38.700410] ata1: EH complete
[ 40.032121] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 40.032127] ata1.01: BMDMA stat 0x64
[ 40.032131] ata1.01: failed command: READ DMA
[ 40.032137] ata1.01: cmd c8/00:08:40:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 40.032137] res 51/40:00:40:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 40.032140] ata1.01: status: { DRDY ERR }
[ 40.032142] ata1.01: error: { UNC }
[ 40.040350] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 40.056335] ata1.01: configured for UDMA/133
[ 40.056350] sd 0:0:1:0: [sda]
[ 40.056352] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 40.056355] sd 0:0:1:0: [sda]
[ 40.056357] Sense Key : Medium Error [current] [descriptor]
[ 40.056360] Descriptor sense data with sense descriptors (in hex):
[ 40.056361] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 40.056370] 00 00 00 40
[ 40.056375] sd 0:0:1:0: [sda]
[ 40.056379] Add. Sense: Unrecovered read error - auto reallocate failed
[ 40.056382] sd 0:0:1:0: [sda] CDB:
[ 40.056383] Read(10): 28 00 00 00 00 40 00 00 08 00
[ 40.056391] end_request: I/O error, dev sda, sector 64
[ 40.056394] Buffer I/O error on device sda, logical block 8
[ 40.056407] ata1: EH complete
[ 41.385458] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 41.385464] ata1.01: BMDMA stat 0x64
[ 41.385468] ata1.01: failed command: READ DMA
[ 41.385475] ata1.01: cmd c8/00:08:40:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 41.385475] res 51/40:00:40:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 41.385478] ata1.01: status: { DRDY ERR }
[ 41.385480] ata1.01: error: { UNC }
[ 41.392371] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 41.408329] ata1.01: configured for UDMA/133
[ 41.408347] sd 0:0:1:0: [sda]
[ 41.408349] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 41.408352] sd 0:0:1:0: [sda]
[ 41.408354] Sense Key : Medium Error [current] [descriptor]
[ 41.408357] Descriptor sense data with sense descriptors (in hex):
[ 41.408359] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 41.408367] 00 00 00 40
[ 41.408372] sd 0:0:1:0: [sda]
[ 41.408376] Add. Sense: Unrecovered read error - auto reallocate failed
[ 41.408379] sd 0:0:1:0: [sda] CDB:
[ 41.408380] Read(10): 28 00 00 00 00 40 00 00 08 00
[ 41.408388] end_request: I/O error, dev sda, sector 64
[ 41.408391] Buffer I/O error on device sda, logical block 8
[ 41.408404] ata1: EH complete
[ 42.738847] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 42.738853] ata1.01: BMDMA stat 0x64
[ 42.738857] ata1.01: failed command: READ DMA
[ 42.738864] ata1.01: cmd c8/00:08:40:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 42.738864] res 51/40:00:40:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 42.738867] ata1.01: status: { DRDY ERR }
[ 42.738869] ata1.01: error: { UNC }
[ 42.744353] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 42.760343] ata1.01: configured for UDMA/133
[ 42.760358] sd 0:0:1:0: [sda]
[ 42.760360] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 42.760363] sd 0:0:1:0: [sda]
[ 42.760365] Sense Key : Medium Error [current] [descriptor]
[ 42.760368] Descriptor sense data with sense descriptors (in hex):
[ 42.760370] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 42.760379] 00 00 00 40
[ 42.760383] sd 0:0:1:0: [sda]
[ 42.760388] Add. Sense: Unrecovered read error - auto reallocate failed
[ 42.760391] sd 0:0:1:0: [sda] CDB:
[ 42.760392] Read(10): 28 00 00 00 00 40 00 00 08 00
[ 42.760400] end_request: I/O error, dev sda, sector 64
[ 42.760403] Buffer I/O error on device sda, logical block 8
[ 42.760414] ata1: EH complete
[ 43.579554] Adding 4272124k swap on /dev/sdb8. Priority:-1 extents:1 across:4272124k FS
[ 43.883512] systemd-udevd[289]: starting version 204
[ 44.030821] lp: driver loaded but no devices found
[ 44.069781] ppdev: user-space parallel port driver
[ 44.086290] parport_pc 00:08: reported by Plug and Play ACPI
[ 44.086356] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 44.092175] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 44.092244] ata1.01: BMDMA stat 0x64
[ 44.092277] ata1.01: failed command: READ DMA
[ 44.092319] ata1.01: cmd c8/00:08:40:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 44.092319] res 51/40:00:40:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 44.092438] ata1.01: status: { DRDY ERR }
[ 44.092472] ata1.01: error: { UNC }
[ 44.100446] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 44.116979] ata1.01: configured for UDMA/133
[ 44.117007] sd 0:0:1:0: [sda]
[ 44.117009] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 44.117011] sd 0:0:1:0: [sda]
[ 44.117014] Sense Key : Medium Error [current] [descriptor]
[ 44.117017] Descriptor sense data with sense descriptors (in hex):
[ 44.117018] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 44.117027] 00 00 00 40
[ 44.117032] sd 0:0:1:0: [sda]
[ 44.117035] Add. Sense: Unrecovered read error - auto reallocate failed
[ 44.117038] sd 0:0:1:0: [sda] CDB:
[ 44.117040] Read(10): 28 00 00 00 00 40 00 00 08 00
[ 44.117047] end_request: I/O error, dev sda, sector 64
[ 44.117104] Buffer I/O error on device sda, logical block 8
[ 44.117172] ata1: EH complete
[ 44.184397] lp0: using parport0 (interrupt-driven).
[ 44.322701] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 905kHz
[ 44.362418] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
[ 44.362475] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
[ 44.545805] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro
[ 44.787017] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 44.930099] MCE: In-kernel MCE decoding enabled.
[ 44.977706] EDAC MC: Ver: 3.0.0
[ 44.998241] AMD64 EDAC driver v3.4.0
[ 44.998296] EDAC amd64: DRAM ECC disabled.
[ 44.998300] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 44.998300] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 44.998300] (Note that use of the override may cause unknown side effects.)
[ 45.003522] [drm] Initialized drm 1.1.0 20060810
[ 45.130075] wmi: Mapper loaded
[ 45.196353] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 45.246350] type=1400 audit(1503834047.823:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=404 comm="apparmor_parser"
[ 45.246363] type=1400 audit(1503834047.823:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=404 comm="apparmor_parser"
[ 45.246369] type=1400 audit(1503834047.823:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=404 comm="apparmor_parser"
[ 45.248667] type=1400 audit(1503834047.827:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=405 comm="apparmor_parser"
[ 45.248682] type=1400 audit(1503834047.827:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=405 comm="apparmor_parser"
[ 45.248689] type=1400 audit(1503834047.827:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=405 comm="apparmor_parser"
[ 45.374885] checking generic (d1000000 500000) vs hw (c0000000 10000000)
[ 45.374891] checking generic (d1000000 500000) vs hw (d0000000 2000000)
[ 45.374893] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 45.374936] Console: switching to colour dummy device 80x25
[ 45.383324] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 45.402956] [drm] hdmi device not found 1 0 1
[ 45.403058] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x096000a1
[ 45.403062] nouveau [ DEVICE][0000:01:00.0] Chipset: G96 (NV96)
[ 45.403064] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 45.403762] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 45.453309] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 45.453312] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 45.453530] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 45.453534] nouveau [ VBIOS][0000:01:00.0] version 62.94.34.00.00
[ 45.454170] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 45.454180] ata1.01: BMDMA stat 0x64
[ 45.454184] ata1.01: failed command: READ DMA
[ 45.454192] ata1.01: cmd c8/00:08:40:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 45.454192] res 51/40:00:40:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 45.454198] ata1.01: status: { DRDY ERR }
[ 45.454201] ata1.01: error: { UNC }
[ 45.460391] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 45.477171] ata1.01: configured for UDMA/133
[ 45.477200] sd 0:0:1:0: [sda]
[ 45.477203] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 45.477205] sd 0:0:1:0: [sda]
[ 45.477207] Sense Key : Medium Error [current] [descriptor]
[ 45.477210] Descriptor sense data with sense descriptors (in hex):
[ 45.477212] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 45.477221] 00 00 00 40
[ 45.477225] sd 0:0:1:0: [sda]
[ 45.477229] Add. Sense: Unrecovered read error - auto reallocate failed
[ 45.477232] sd 0:0:1:0: [sda] CDB:
[ 45.477233] Read(10): 28 00 00 00 00 40 00 00 08 00
[ 45.477241] end_request: I/O error, dev sda, sector 64
[ 45.477270] ata1: EH complete
[ 45.577880] intel8x0_measure_ac97_clock: measured 54419 usecs (2672 samples)
[ 45.577887] intel8x0: clocking to 46924
[ 45.641607] nouveau 0000:01:00.0: irq 44 for MSI/MSI-X
[ 45.641627] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 45.641671] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 45.641673] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 45.641674] nouveau [ PFB][0000:01:00.0] ZCOMP: 2048 tags
[ 45.832312] skge 0000:05:0c.0 eth0: enabling interface
[ 45.838977] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 46.081849] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 46.409297] nouveau [ PTHERM][0000:01:00.0] FAN control: PWM
[ 46.409318] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 46.409359] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 46.409388] nouveau [ CLK][0000:01:00.0] 0f: core 650 MHz shader 1625 MHz memory 500 MHz
[ 46.409428] nouveau [ CLK][0000:01:00.0] --: core 400 MHz shader 800 MHz memory 504 MHz
[ 46.414189] [TTM] Zone kernel: Available graphics memory: 1024912 kiB
[ 46.414194] [TTM] Initializing pool allocator
[ 46.414201] [TTM] Initializing DMA pool allocator
[ 46.414220] nouveau [ DRM] VRAM: 512 MiB
[ 46.414222] nouveau [ DRM] GART: 1048576 MiB
[ 46.414230] nouveau [ DRM] TMDS table version 2.0
[ 46.414233] nouveau [ DRM] DCB version 4.0
[ 46.414236] nouveau [ DRM] DCB outp 00: 02000300 00000028
[ 46.414239] nouveau [ DRM] DCB outp 01: 01000302 00020030
[ 46.414242] nouveau [ DRM] DCB outp 02: 04011310 00000028
[ 46.414244] nouveau [ DRM] DCB outp 03: 02011312 00020030
[ 46.414246] nouveau [ DRM] DCB outp 04: 010223f1 00c0c080
[ 46.414249] nouveau [ DRM] DCB conn 00: 00001030
[ 46.414252] nouveau [ DRM] DCB conn 01: 00002130
[ 46.414254] nouveau [ DRM] DCB conn 02: 00000210
[ 46.414256] nouveau [ DRM] DCB conn 03: 00000211
[ 46.414258] nouveau [ DRM] DCB conn 04: 00000213
[ 46.438376] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 46.438383] nouveau W[ DRM] TV-1 has no encoders, removing
[ 46.438450] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 46.438452] [drm] No driver support for vblank timestamp query.
[ 46.699031] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 46.762611] nouveau [ DRM] allocated 1280x1024 fb: 0x70000, bo ffff88007ba62800
[ 46.762911] fbcon: nouveaufb (fb0) is primary device
[ 46.807206] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 46.807208] ata1.01: BMDMA stat 0x64
[ 46.807211] ata1.01: failed command: READ DMA
[ 46.807216] ata1.01: cmd c8/00:08:40:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 46.807216] res 51/40:00:40:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 46.807218] ata1.01: status: { DRDY ERR }
[ 46.807219] ata1.01: error: { UNC }
[ 46.812350] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 46.828363] ata1.01: configured for UDMA/133
[ 46.828383] sd 0:0:1:0: [sda]
[ 46.828384] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 46.828386] sd 0:0:1:0: [sda]
[ 46.828388] Sense Key : Medium Error [current] [descriptor]
[ 46.828389] Descriptor sense data with sense descriptors (in hex):
[ 46.828396] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 46.828398] 00 00 00 40
[ 46.828399] sd 0:0:1:0: [sda]
[ 46.828402] Add. Sense: Unrecovered read error - auto reallocate failed
[ 46.828404] sd 0:0:1:0: [sda] CDB:
[ 46.828408] Read(10): 28 00 00 00 00 40 00 00 08 00
[ 46.828410] end_request: I/O error, dev sda, sector 64
[ 46.828412] quiet_error: 1 callbacks suppressed
[ 46.828414] Buffer I/O error on device sda, logical block 8
[ 46.828428] ata1: EH complete
[ 46.867451] Console: switching to colour frame buffer device 160x64
[ 46.868533] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 46.868536] nouveau 0000:01:00.0: registered panic notifier
[ 46.868544] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[ 47.893820] type=1400 audit(1503834050.471:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=674 comm="apparmor_parser"
[ 47.893834] type=1400 audit(1503834050.471:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=674 comm="apparmor_parser"
[ 48.160595] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 48.160617] ata1.01: BMDMA stat 0x64
[ 48.160627] ata1.01: failed command: READ DMA
[ 48.160639] ata1.01: cmd c8/00:08:40:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 48.160639] res 51/40:00:40:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 48.160657] ata1.01: status: { DRDY ERR }
[ 48.160664] ata1.01: error: { UNC }
[ 48.168411] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 48.184359] ata1.01: configured for UDMA/133
[ 48.184393] sd 0:0:1:0: [sda]
[ 48.184395] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 48.184398] sd 0:0:1:0: [sda]
[ 48.184400] Sense Key : Medium Error [current] [descriptor]
[ 48.184403] Descriptor sense data with sense descriptors (in hex):
[ 48.184405] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 48.184414] 00 00 00 40
[ 48.184418] sd 0:0:1:0: [sda]
[ 48.184423] Add. Sense: Unrecovered read error - auto reallocate failed
[ 48.184426] sd 0:0:1:0: [sda] CDB:
[ 48.184428] Read(10): 28 00 00 00 00 40 00 00 08 00
[ 48.184436] end_request: I/O error, dev sda, sector 64
[ 48.184467] Buffer I/O error on device sda, logical block 8
[ 48.184503] ata1: EH complete
[ 48.398423] Bluetooth: Core ver 2.17
[ 48.398505] NET: Registered protocol family 31
[ 48.398507] Bluetooth: HCI device and connection manager initialized
[ 48.399040] Bluetooth: HCI socket layer initialized
[ 48.399046] Bluetooth: L2CAP socket layer initialized
[ 48.399055] Bluetooth: SCO socket layer initialized
[ 48.448670] Bluetooth: RFCOMM TTY layer initialized
[ 48.448690] Bluetooth: RFCOMM socket layer initialized
[ 48.448701] Bluetooth: RFCOMM ver 1.11
[ 48.453506] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 48.453513] Bluetooth: BNEP filters: protocol multicast
[ 48.453531] Bluetooth: BNEP socket layer initialized
[ 48.580323] init: cups main process (675) killed by HUP signal
[ 48.580345] init: cups main process ended, respawning
[ 49.513957] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 49.513964] ata1.01: BMDMA stat 0x64
[ 49.513969] ata1.01: failed command: READ DMA
[ 49.513975] ata1.01: cmd c8/00:08:40:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 49.513975] res 51/40:00:40:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 49.513979] ata1.01: status: { DRDY ERR }
[ 49.513981] ata1.01: error: { UNC }
[ 49.520391] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 49.536345] ata1.01: configured for UDMA/133
[ 49.536373] sd 0:0:1:0: [sda]
[ 49.536375] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 49.536378] sd 0:0:1:0: [sda]
[ 49.536380] Sense Key : Medium Error [current] [descriptor]
[ 49.536383] Descriptor sense data with sense descriptors (in hex):
[ 49.536385] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 49.536393] 00 00 00 40
[ 49.536398] sd 0:0:1:0: [sda]
[ 49.536402] Add. Sense: Unrecovered read error - auto reallocate failed
[ 49.536404] sd 0:0:1:0: [sda] CDB:
[ 49.536406] Read(10): 28 00 00 00 00 40 00 00 08 00
[ 49.536414] end_request: I/O error, dev sda, sector 64
[ 49.536490] Buffer I/O error on device sda, logical block 8
[ 49.536503] ata1: EH complete
[ 49.851670] init: samba-ad-dc main process (719) terminated with status 1
[ 50.867326] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.867333] ata1.01: BMDMA stat 0x64
[ 50.867337] ata1.01: failed command: READ DMA
[ 50.867344] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 50.867344] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 50.867348] ata1.01: status: { DRDY ERR }
[ 50.867350] ata1.01: error: { UNC }
[ 50.872362] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 50.888364] ata1.01: configured for UDMA/133
[ 50.888391] sd 0:0:1:0: [sda]
[ 50.888393] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 50.888396] sd 0:0:1:0: [sda]
[ 50.888398] Sense Key : Medium Error [current] [descriptor]
[ 50.888401] Descriptor sense data with sense descriptors (in hex):
[ 50.888403] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 50.888412] 00 00 00 08
[ 50.888416] sd 0:0:1:0: [sda]
[ 50.888420] Add. Sense: Unrecovered read error - auto reallocate failed
[ 50.888423] sd 0:0:1:0: [sda] CDB:
[ 50.888424] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 50.888432] end_request: I/O error, dev sda, sector 8
[ 50.888437] Buffer I/O error on device sda, logical block 1
[ 50.888459] ata1: EH complete
[ 52.228962] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.228969] ata1.01: BMDMA stat 0x64
[ 52.228973] ata1.01: failed command: READ DMA
[ 52.228980] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 52.228980] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 52.228983] ata1.01: status: { DRDY ERR }
[ 52.228985] ata1.01: error: { UNC }
[ 52.236359] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 52.252358] ata1.01: configured for UDMA/133
[ 52.252384] sd 0:0:1:0: [sda]
[ 52.252386] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 52.252389] sd 0:0:1:0: [sda]
[ 52.252391] Sense Key : Medium Error [current] [descriptor]
[ 52.252394] Descriptor sense data with sense descriptors (in hex):
[ 52.252396] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 52.252405] 00 00 00 08
[ 52.252409] sd 0:0:1:0: [sda]
[ 52.252413] Add. Sense: Unrecovered read error - auto reallocate failed
[ 52.252416] sd 0:0:1:0: [sda] CDB:
[ 52.252417] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 52.252425] end_request: I/O error, dev sda, sector 8
[ 52.252429] Buffer I/O error on device sda, logical block 1
[ 52.252452] ata1: EH complete
[ 53.590630] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 53.590637] ata1.01: BMDMA stat 0x64
[ 53.590641] ata1.01: failed command: READ DMA
[ 53.590648] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 53.590648] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 53.590651] ata1.01: status: { DRDY ERR }
[ 53.590653] ata1.01: error: { UNC }
[ 53.596343] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 53.612344] ata1.01: configured for UDMA/133
[ 53.612370] sd 0:0:1:0: [sda]
[ 53.612372] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 53.612375] sd 0:0:1:0: [sda]
[ 53.612377] Sense Key : Medium Error [current] [descriptor]
[ 53.612380] Descriptor sense data with sense descriptors (in hex):
[ 53.612382] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 53.612391] 00 00 00 08
[ 53.612395] sd 0:0:1:0: [sda]
[ 53.612399] Add. Sense: Unrecovered read error - auto reallocate failed
[ 53.612402] sd 0:0:1:0: [sda] CDB:
[ 53.612403] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 53.612411] end_request: I/O error, dev sda, sector 8
[ 53.612415] Buffer I/O error on device sda, logical block 1
[ 53.612438] ata1: EH complete
[ 54.952321] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 54.952329] ata1.01: BMDMA stat 0x64
[ 54.952333] ata1.01: failed command: READ DMA
[ 54.952340] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 54.952340] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 54.952343] ata1.01: status: { DRDY ERR }
[ 54.952345] ata1.01: error: { UNC }
[ 54.960347] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 54.976346] ata1.01: configured for UDMA/133
[ 54.976372] sd 0:0:1:0: [sda]
[ 54.976374] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 54.976377] sd 0:0:1:0: [sda]
[ 54.976379] Sense Key : Medium Error [current] [descriptor]
[ 54.976382] Descriptor sense data with sense descriptors (in hex):
[ 54.976384] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 54.976393] 00 00 00 08
[ 54.976397] sd 0:0:1:0: [sda]
[ 54.976401] Add. Sense: Unrecovered read error - auto reallocate failed
[ 54.976404] sd 0:0:1:0: [sda] CDB:
[ 54.976405] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 54.976413] end_request: I/O error, dev sda, sector 8
[ 54.976418] Buffer I/O error on device sda, logical block 1
[ 54.976439] ata1: EH complete
[ 56.313962] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 56.313969] ata1.01: BMDMA stat 0x64
[ 56.313974] ata1.01: failed command: READ DMA
[ 56.313980] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 56.313980] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 56.313983] ata1.01: status: { DRDY ERR }
[ 56.313985] ata1.01: error: { UNC }
[ 56.320363] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 56.336361] ata1.01: configured for UDMA/133
[ 56.336387] sd 0:0:1:0: [sda]
[ 56.336389] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 56.336392] sd 0:0:1:0: [sda]
[ 56.336394] Sense Key : Medium Error [current] [descriptor]
[ 56.336397] Descriptor sense data with sense descriptors (in hex):
[ 56.336399] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 56.336407] 00 00 00 08
[ 56.336412] sd 0:0:1:0: [sda]
[ 56.336415] Add. Sense: Unrecovered read error - auto reallocate failed
[ 56.336418] sd 0:0:1:0: [sda] CDB:
[ 56.336420] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 56.336427] end_request: I/O error, dev sda, sector 8
[ 56.336432] Buffer I/O error on device sda, logical block 1
[ 56.336454] ata1: EH complete
[ 57.675649] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 57.675656] ata1.01: BMDMA stat 0x64
[ 57.675660] ata1.01: failed command: READ DMA
[ 57.675667] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 57.675667] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 57.675670] ata1.01: status: { DRDY ERR }
[ 57.675672] ata1.01: error: { UNC }
[ 57.680364] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 57.696333] ata1.01: configured for UDMA/133
[ 57.696359] sd 0:0:1:0: [sda]
[ 57.696361] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 57.696363] sd 0:0:1:0: [sda]
[ 57.696365] Sense Key : Medium Error [current] [descriptor]
[ 57.696369] Descriptor sense data with sense descriptors (in hex):
[ 57.696370] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 57.696379] 00 00 00 08
[ 57.696384] sd 0:0:1:0: [sda]
[ 57.696387] Add. Sense: Unrecovered read error - auto reallocate failed
[ 57.696390] sd 0:0:1:0: [sda] CDB:
[ 57.696392] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 57.696399] end_request: I/O error, dev sda, sector 8
[ 57.696404] Buffer I/O error on device sda, logical block 1
[ 57.696427] ata1: EH complete
[ 58.171175] skge 0000:05:0c.0 eth0: Link is up at 100 Mbps, half duplex, flow control none
[ 58.171204] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 59.037289] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 59.037297] ata1.01: BMDMA stat 0x64
[ 59.037301] ata1.01: failed command: READ DMA
[ 59.037307] ata1.01: cmd c8/00:08:08:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 59.037307] res 51/40:00:08:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 59.037311] ata1.01: status: { DRDY ERR }
[ 59.037313] ata1.01: error: { UNC }
[ 59.044363] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 59.060339] ata1.01: configured for UDMA/133
[ 59.060366] sd 0:0:1:0: [sda]
[ 59.060368] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 59.060370] sd 0:0:1:0: [sda]
[ 59.060372] Sense Key : Medium Error [current] [descriptor]
[ 59.060376] Descriptor sense data with sense descriptors (in hex):
[ 59.060377] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 59.060386] 00 00 00 08
[ 59.060391] sd 0:0:1:0: [sda]
[ 59.060395] Add. Sense: Unrecovered read error - auto reallocate failed
[ 59.060397] sd 0:0:1:0: [sda] CDB:
[ 59.060399] Read(10): 28 00 00 00 00 08 00 00 08 00
[ 59.060406] end_request: I/O error, dev sda, sector 8
[ 59.060411] Buffer I/O error on device sda, logical block 1
[ 59.060434] ata1: EH complete
[ 60.432190] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 60.432197] ata1.01: BMDMA stat 0x64
[ 60.432202] ata1.01: failed command: READ DMA
[ 60.432208] ata1.01: cmd c8/00:08:18:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 60.432208] res 51/40:00:19:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 60.432211] ata1.01: status: { DRDY ERR }
[ 60.432213] ata1.01: error: { UNC }
[ 60.440345] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 60.456348] ata1.01: configured for UDMA/133
[ 60.456376] sd 0:0:1:0: [sda]
[ 60.456378] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 60.456381] sd 0:0:1:0: [sda]
[ 60.456383] Sense Key : Medium Error [current] [descriptor]
[ 60.456386] Descriptor sense data with sense descriptors (in hex):
[ 60.456388] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 60.456397] 00 00 00 19
[ 60.456401] sd 0:0:1:0: [sda]
[ 60.456405] Add. Sense: Unrecovered read error - auto reallocate failed
[ 60.456407] sd 0:0:1:0: [sda] CDB:
[ 60.456409] Read(10): 28 00 00 00 00 18 00 00 08 00
[ 60.456417] end_request: I/O error, dev sda, sector 25
[ 60.456421] Buffer I/O error on device sda, logical block 3
[ 60.456444] ata1: EH complete
[ 61.827051] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 61.827058] ata1.01: BMDMA stat 0x64
[ 61.827063] ata1.01: failed command: READ DMA
[ 61.827069] ata1.01: cmd c8/00:08:18:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 61.827069] res 51/40:00:19:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 61.827073] ata1.01: status: { DRDY ERR }
[ 61.827075] ata1.01: error: { UNC }
[ 61.832363] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 61.848360] ata1.01: configured for UDMA/133
[ 61.848387] sd 0:0:1:0: [sda]
[ 61.848389] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 61.848391] sd 0:0:1:0: [sda]
[ 61.848393] Sense Key : Medium Error [current] [descriptor]
[ 61.848397] Descriptor sense data with sense descriptors (in hex):
[ 61.848398] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 61.848407] 00 00 00 19
[ 61.848412] sd 0:0:1:0: [sda]
[ 61.848415] Add. Sense: Unrecovered read error - auto reallocate failed
[ 61.848418] sd 0:0:1:0: [sda] CDB:
[ 61.848419] Read(10): 28 00 00 00 00 18 00 00 08 00
[ 61.848427] end_request: I/O error, dev sda, sector 25
[ 61.848431] Buffer I/O error on device sda, logical block 3
[ 61.848454] ata1: EH complete
[ 63.221927] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 63.221935] ata1.01: BMDMA stat 0x64
[ 63.221939] ata1.01: failed command: READ DMA
[ 63.221946] ata1.01: cmd c8/00:08:18:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 63.221946] res 51/40:00:19:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 63.221949] ata1.01: status: { DRDY ERR }
[ 63.221951] ata1.01: error: { UNC }
[ 63.228359] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 63.244357] ata1.01: configured for UDMA/133
[ 63.244383] sd 0:0:1:0: [sda]
[ 63.244385] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 63.244387] sd 0:0:1:0: [sda]
[ 63.244389] Sense Key : Medium Error [current] [descriptor]
[ 63.244393] Descriptor sense data with sense descriptors (in hex):
[ 63.244394] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 63.244403] 00 00 00 19
[ 63.244408] sd 0:0:1:0: [sda]
[ 63.244411] Add. Sense: Unrecovered read error - auto reallocate failed
[ 63.244414] sd 0:0:1:0: [sda] CDB:
[ 63.244416] Read(10): 28 00 00 00 00 18 00 00 08 00
[ 63.244424] end_request: I/O error, dev sda, sector 25
[ 63.244428] Buffer I/O error on device sda, logical block 3
[ 63.244450] ata1: EH complete
[ 64.616812] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 64.616819] ata1.01: BMDMA stat 0x64
[ 64.616823] ata1.01: failed command: READ DMA
[ 64.616830] ata1.01: cmd c8/00:08:18:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 64.616830] res 51/40:00:19:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 64.616833] ata1.01: status: { DRDY ERR }
[ 64.616836] ata1.01: error: { UNC }
[ 64.624355] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 64.640356] ata1.01: configured for UDMA/133
[ 64.640381] sd 0:0:1:0: [sda]
[ 64.640384] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 64.640386] sd 0:0:1:0: [sda]
[ 64.640388] Sense Key : Medium Error [current] [descriptor]
[ 64.640391] Descriptor sense data with sense descriptors (in hex):
[ 64.640393] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 64.640402] 00 00 00 19
[ 64.640406] sd 0:0:1:0: [sda]
[ 64.640410] Add. Sense: Unrecovered read error - auto reallocate failed
[ 64.640412] sd 0:0:1:0: [sda] CDB:
[ 64.640414] Read(10): 28 00 00 00 00 18 00 00 08 00
[ 64.640422] end_request: I/O error, dev sda, sector 25
[ 64.640426] Buffer I/O error on device sda, logical block 3
[ 64.640449] ata1: EH complete
[ 65.978449] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 65.978457] ata1.01: BMDMA stat 0x64
[ 65.978461] ata1.01: failed command: READ DMA
[ 65.978467] ata1.01: cmd c8/00:08:38:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 65.978467] res 51/40:00:38:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 65.978471] ata1.01: status: { DRDY ERR }
[ 65.978473] ata1.01: error: { UNC }
[ 65.984344] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 66.000356] ata1.01: configured for UDMA/133
[ 66.000382] sd 0:0:1:0: [sda]
[ 66.000384] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 66.000387] sd 0:0:1:0: [sda]
[ 66.000389] Sense Key : Medium Error [current] [descriptor]
[ 66.000392] Descriptor sense data with sense descriptors (in hex):
[ 66.000394] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 66.000403] 00 00 00 38
[ 66.000407] sd 0:0:1:0: [sda]
[ 66.000411] Add. Sense: Unrecovered read error - auto reallocate failed
[ 66.000413] sd 0:0:1:0: [sda] CDB:
[ 66.000415] Read(10): 28 00 00 00 00 38 00 00 08 00
[ 66.000423] end_request: I/O error, dev sda, sector 56
[ 66.000427] Buffer I/O error on device sda, logical block 7
[ 66.000451] ata1: EH complete
[ 67.340135] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 67.340143] ata1.01: BMDMA stat 0x64
[ 67.340147] ata1.01: failed command: READ DMA
[ 67.340154] ata1.01: cmd c8/00:08:38:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 67.340154] res 51/40:00:38:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 67.340157] ata1.01: status: { DRDY ERR }
[ 67.340159] ata1.01: error: { UNC }
[ 67.348345] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 67.364347] ata1.01: configured for UDMA/133
[ 67.364373] sd 0:0:1:0: [sda]
[ 67.364375] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 67.364378] sd 0:0:1:0: [sda]
[ 67.364380] Sense Key : Medium Error [current] [descriptor]
[ 67.364383] Descriptor sense data with sense descriptors (in hex):
[ 67.364385] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 67.364394] 00 00 00 38
[ 67.364398] sd 0:0:1:0: [sda]
[ 67.364402] Add. Sense: Unrecovered read error - auto reallocate failed
[ 67.364404] sd 0:0:1:0: [sda] CDB:
[ 67.364406] Read(10): 28 00 00 00 00 38 00 00 08 00
[ 67.364414] end_request: I/O error, dev sda, sector 56
[ 67.364418] Buffer I/O error on device sda, logical block 7
[ 67.364441] ata1: EH complete
[ 68.701811] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 68.701820] ata1.01: BMDMA stat 0x64
[ 68.701824] ata1.01: failed command: READ DMA
[ 68.701831] ata1.01: cmd c8/00:08:38:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 68.701831] res 51/40:00:38:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 68.701835] ata1.01: status: { DRDY ERR }
[ 68.701837] ata1.01: error: { UNC }
[ 68.708435] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 68.724426] ata1.01: configured for UDMA/133
[ 68.724456] sd 0:0:1:0: [sda]
[ 68.724458] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 68.724461] sd 0:0:1:0: [sda]
[ 68.724463] Sense Key : Medium Error [current] [descriptor]
[ 68.724466] Descriptor sense data with sense descriptors (in hex):
[ 68.724468] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 68.724477] 00 00 00 38
[ 68.724481] sd 0:0:1:0: [sda]
[ 68.724485] Add. Sense: Unrecovered read error - auto reallocate failed
[ 68.724488] sd 0:0:1:0: [sda] CDB:
[ 68.724489] Read(10): 28 00 00 00 00 38 00 00 08 00
[ 68.724497] end_request: I/O error, dev sda, sector 56
[ 68.724501] Buffer I/O error on device sda, logical block 7
[ 68.724526] ata1: EH complete
[ 69.709413] init: failsafe main process (634) killed by TERM signal
[ 69.877351] init: network-manager main process (942) terminated with status 127
[ 69.877378] init: network-manager main process ended, respawning
[ 70.063463] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 70.063472] ata1.01: BMDMA stat 0x64
[ 70.063476] ata1.01: failed command: READ DMA
[ 70.063483] ata1.01: cmd c8/00:08:38:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
[ 70.063483] res 51/40:00:38:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 70.063486] ata1.01: status: { DRDY ERR }
[ 70.063488] ata1.01: error: { UNC }
[ 70.069786] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc7c0c0) ACPI=0x7f01f (600:15:0x1c)
[ 70.084342] ata1.01: configured for UDMA/133
[ 70.084368] sd 0:0:1:0: [sda]
[ 70.084370] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 70.084372] sd 0:0:1:0: [sda]
[ 70.084374] Sense Key : Medium Error [current] [descriptor]
[ 70.084378] Descriptor sense data with sense descriptors (in hex):
[ 70.084379] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 70.084388] 00 00 00 38
[ 70.084392] sd 0:0:1:0: [sda]
[ 70.084396] Add. Sense: Unrecovered read error - auto reallocate failed
[ 70.084399] sd 0:0:1:0: [sda] CDB:
[ 70.084400] Read(10): 28 00 00 00 00 38 00 00 08 00
[ 70.084408] end_request: I/O error, dev sda, sector 56
[ 70.084412] Buffer I/O error on device sda, logical block 7
[ 70.084430] ata1: EH complete
[ 70.135981] type=1400 audit(1503834072.715:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1007 comm="apparmor_parser"
[ 70.136053] type=1400 audit(1503834072.715:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=1007 comm="apparmor_parser"
[ 70.139589] type=1400 audit(1503834072.719:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1008 comm="apparmor_parser"
[ 70.139604] type=1400 audit(1503834072.719:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1008 comm="apparmor_parser"
[ 70.139611] type=1400 audit(1503834072.719:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1008 comm="apparmor_parser"
[ 70.158398] type=1400 audit(1503834072.739:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=1009 comm="apparmor_parser"
[ 70.158415] type=1400 audit(1503834072.739:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1009 comm="apparmor_parser"Bien entendu, si tu as un message d'erreur, tu le donneras ici.
La je me suis loupé , j'ai fais une erreur dans un espace entre sudo cat /var... j'avais tapé sudo cat/var j'ai eu un message d'erreur m'indiquant que la commande sudo cat/var n'existait pas j'ai donc corrigé l'espace et relancé
là j'ai eu un autre message d'erreur me disant qu'il ne pouvait pas executer ou supprimer .*authority ("rm: impossible de supprimer ".*authority": Aucun fichier ou dossier de ce type")
(Je ne connaissais pas le moyen de remonter dans les messages affichés sur ma console (shift + page up = c'est pratique))
titi45.txt
var/log/apt/history.log
Start-Date: 2017-08-01 21:51:17
Commandline: apt full-upgrade
Install: linux-image-3.13.0-125-generic:amd64 (3.13.0-125.174, automatic), linux-image-extra-3.13.0-125-generic:amd64 (3.13.0-125.174, automatic), linux-headers-3.13.0-125-generic:amd64 (3.13.0-125.174, automatic), linux-headers-3.13.0-125:amd64 (3.13.0-125.174, automatic)
Upgrade: python3-problem-report:amd64 (2.14.1-0ubuntu3.23, 2.14.1-0ubuntu3.25), linux-headers-generic:amd64 (3.13.0.123.133, 3.13.0.125.135), python-samba:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), libkrb5-26-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), libroken18-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), libdrm-intel1:amd64 (2.4.60-2~ubuntu14.04.1, 2.4.67-1ubuntu0.14.04.2), libwind0-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), perlmagick:amd64 (6.7.7.10-6ubuntu3.7, 6.7.7.10-6ubuntu3.9), libhcrypto4-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), libdrm-radeon1:amd64 (2.4.60-2~ubuntu14.04.1, 2.4.67-1ubuntu0.14.04.2), samba:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), libheimntlm0-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), xserver-xorg-core:amd64 (1.15.1-0ubuntu2.7, 1.15.1-0ubuntu2.9), samba-dsdb-modules:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), libmagickcore5-extra:amd64 (6.7.7.10-6ubuntu3.7, 6.7.7.10-6ubuntu3.9), xserver-common:amd64 (1.15.1-0ubuntu2.7, 1.15.1-0ubuntu2.9), libspice-server1:amd64 (0.12.4-0nocelt2ubuntu1.4, 0.12.4-0nocelt2ubuntu1.5), samba-common-bin:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), libasn1-8-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), libmagickwand5:amd64 (6.7.7.10-6ubuntu3.7, 6.7.7.10-6ubuntu3.9), gdb:amd64 (7.7.1-0ubuntu5~14.04.2, 7.7.1-0ubuntu5~14.04.3), samba-libs:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), mysql-common:amd64 (5.5.55-0ubuntu0.14.04.1, 5.5.57-0ubuntu0.14.04.1), imagemagick:amd64 (6.7.7.10-6ubuntu3.7, 6.7.7.10-6ubuntu3.9), libdrm-nouveau2:amd64 (2.4.60-2~ubuntu14.04.1, 2.4.67-1ubuntu0.14.04.2), libmysqlclient18:amd64 (5.5.55-0ubuntu0.14.04.1, 5.5.57-0ubuntu0.14.04.1), libheimbase1-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), smbclient:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), apport-gtk:amd64 (2.14.1-0ubuntu3.23, 2.14.1-0ubuntu3.25), apport:amd64 (2.14.1-0ubuntu3.23, 2.14.1-0ubuntu3.25), libmagickcore5:amd64 (6.7.7.10-6ubuntu3.7, 6.7.7.10-6ubuntu3.9), libexpat1:amd64 (2.1.0-4ubuntu1.3, 2.1.0-4ubuntu1.4), python3-apport:amd64 (2.14.1-0ubuntu3.23, 2.14.1-0ubuntu3.25), imagemagick-common:amd64 (6.7.7.10-6ubuntu3.7, 6.7.7.10-6ubuntu3.9), libwbclient0:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), libgssapi3-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), samba-vfs-modules:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), linux-libc-dev:amd64 (3.13.0-123.172, 3.13.0-125.174), samba-common:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), libhx509-5-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), libdrm2:amd64 (2.4.60-2~ubuntu14.04.1, 2.4.67-1ubuntu0.14.04.2), linux-image-generic:amd64 (3.13.0.123.133, 3.13.0.125.135), libsmbclient:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), linux-generic:amd64 (3.13.0.123.133, 3.13.0.125.135)
End-Date: 2017-08-01 21:56:53
Start-Date: 2017-08-07 21:18:01
Commandline: apt-get dist-upgrade
Install: linux-headers-3.13.0-126-generic:amd64 (3.13.0-126.175, automatic), linux-image-3.13.0-126-generic:amd64 (3.13.0-126.175, automatic), linux-image-extra-3.13.0-126-generic:amd64 (3.13.0-126.175, automatic), linux-headers-3.13.0-126:amd64 (3.13.0-126.175, automatic)
Upgrade: linux-headers-generic:amd64 (3.13.0.125.135, 3.13.0.126.136), libfreerdp1:amd64 (1.0.2-2ubuntu1, 1.0.2-2ubuntu1.1), linux-libc-dev:amd64 (3.13.0-125.174, 3.13.0-126.175), linux-image-generic:amd64 (3.13.0.125.135, 3.13.0.126.136), linux-generic:amd64 (3.13.0.125.135, 3.13.0.126.136)
End-Date: 2017-08-07 21:26:34
Start-Date: 2017-08-07 21:29:00
Commandline: apt-get autoremove --purge
Purge: linux-image-3.13.0-123-generic:amd64 (3.13.0-123.172), linux-image-extra-3.13.0-123-generic:amd64 (3.13.0-123.172), linux-headers-3.13.0-123-generic:amd64 (3.13.0-123.172), linux-headers-3.13.0-123:amd64 (3.13.0-123.172)
End-Date: 2017-08-07 21:33:15
Start-Date: 2017-08-08 21:59:47
Commandline: apt-get install --reinstall xubuntu-desktop
Reinstall: xubuntu-desktop:amd64 (2.180)
End-Date: 2017-08-08 22:00:13
Start-Date: 2017-08-15 21:09:41
Commandline: apt-get remove --purge linux-headers-3.13.0-48
Purge: linux-headers-3.13.0-48:amd64 (3.13.0-48.80), linux-headers-3.13.0-48-generic:amd64 (3.13.0-48.80)
End-Date: 2017-08-15 21:10:21
Start-Date: 2017-08-15 21:18:09
Commandline: apt-get remove --purge linux-image-3.13.0-48-generic
Purge: linux-image-extra-3.13.0-48-generic:amd64 (3.13.0-48.80), linux-image-3.13.0-48-generic:amd64 (3.13.0-48.80)
End-Date: 2017-08-15 21:22:19
Start-Date: 2017-08-15 21:44:30
Commandline: apt-get remove --purge linux-headers-3.13.0-49
Purge: linux-headers-3.13.0-49-generic:amd64 (3.13.0-49.83), linux-headers-3.13.0-49:amd64 (3.13.0-49.83)
End-Date: 2017-08-15 21:45:00
Start-Date: 2017-08-15 22:18:49
Commandline: apt-get remove --purge linux-image-3.13.0-49-generic
Purge: linux-image-extra-3.13.0-49-generic:amd64 (3.13.0-49.83), linux-image-3.13.0-49-generic:amd64 (3.13.0-49.83)
End-Date: 2017-08-15 22:21:54
Start-Date: 2017-08-15 22:27:24
Commandline: apt-get install --reinstall linux-headers-3.13.0-126 linux-image-3.13.0-126-generic
Reinstall: linux-image-3.13.0-126-generic:amd64 (3.13.0-126.175), linux-headers-3.13.0-126:amd64 (3.13.0-126.175)
End-Date: 2017-08-15 22:31:01
Start-Date: 2017-08-15 22:33:33
Commandline: apt-get install linux-generic
Install: linux-image-3.13.0-128-generic:amd64 (3.13.0-128.177, automatic), linux-image-extra-3.13.0-128-generic:amd64 (3.13.0-128.177, automatic), linux-headers-3.13.0-128:amd64 (3.13.0-128.177, automatic), linux-headers-3.13.0-128-generic:amd64 (3.13.0-128.177, automatic)
Upgrade: linux-headers-generic:amd64 (3.13.0.126.136, 3.13.0.128.137), linux-image-generic:amd64 (3.13.0.126.136, 3.13.0.128.137), linux-generic:amd64 (3.13.0.126.136, 3.13.0.128.137)
End-Date: 2017-08-15 22:40:32
Start-Date: 2017-08-16 07:31:10
Commandline: apt-get autoremove --purge
Purge: linux-image-3.13.0-125-generic:amd64 (3.13.0-125.174), linux-image-extra-3.13.0-125-generic:amd64 (3.13.0-125.174), linux-headers-3.13.0-125-generic:amd64 (3.13.0-125.174), linux-headers-3.13.0-125:amd64 (3.13.0-125.174)
End-Date: 2017-08-16 07:35:07
Start-Date: 2017-08-16 21:49:58
Commandline: apt-get install terminator
Install: python-vte:amd64 (0.28.2-5ubuntu1, automatic), python-pyorbit:amd64 (2.24.0-6ubuntu4, automatic), python-keybinder:amd64 (0.3.0-2, automatic), python-gnome2:amd64 (2.28.1+dfsg-1ubuntu2, automatic), terminator:amd64 (0.97-2)
End-Date: 2017-08-16 21:50:49
Start-Date: 2017-08-17 14:31:49
Commandline: apt-get install gpm
Install: gpm:amd64 (1.20.4-6.1)
End-Date: 2017-08-17 14:32:30
Start-Date: 2017-08-17 14:35:44
Commandline: apt-get autoremove --purge -y
Purge: linux-image-3.13.0-76-generic:amd64 (3.13.0-76.120), linux-image-extra-3.13.0-85-generic:amd64 (3.13.0-85.129), linux-headers-3.13.0-98-generic:amd64 (3.13.0-98.145), linux-image-3.13.0-85-generic:amd64 (3.13.0-85.129), linux-image-extra-3.13.0-65-generic:amd64 (3.13.0-65.106), linux-image-3.13.0-100-generic:amd64 (3.13.0-100.147), linux-headers-3.13.0-106-generic:amd64 (3.13.0-106.153), linux-image-3.13.0-65-generic:amd64 (3.13.0-65.106), linux-image-extra-3.13.0-74-generic:amd64 (3.13.0-74.118), linux-headers-3.13.0-58-generic:amd64 (3.13.0-58.97), linux-headers-3.13.0-87-generic:amd64 (3.13.0-87.133), linux-image-3.13.0-74-generic:amd64 (3.13.0-74.118), linux-image-extra-3.13.0-83-generic:amd64 (3.13.0-83.127), linux-image-extra-3.13.0-100-generic:amd64 (3.13.0-100.147), linux-headers-3.13.0-67-generic:amd64 (3.13.0-67.110), linux-headers-3.13.0-96-generic:amd64 (3.13.0-96.143), linux-image-3.13.0-83-generic:amd64 (3.13.0-83.127), linux-image-extra-3.13.0-63-generic:amd64 (3.13.0-63.103), linux-image-extra-3.13.0-92-generic:amd64 (3.13.0-92.139), linux-headers-3.13.0-76-generic:amd64 (3.13.0-76.120), linux-image-3.13.0-63-generic:amd64 (3.13.0-63.103), linux-image-3.13.0-92-generic:amd64 (3.13.0-92.139), linux-headers-3.13.0-85-generic:amd64 (3.13.0-85.129), linux-headers-3.13.0-65-generic:amd64 (3.13.0-65.106), linux-image-3.13.0-116-generic:amd64 (3.13.0-116.163), linux-image-extra-3.13.0-61-generic:amd64 (3.13.0-61.100), linux-headers-3.13.0-74-generic:amd64 (3.13.0-74.118), linux-image-3.13.0-61-generic:amd64 (3.13.0-61.100), linux-headers-3.13.0-83-generic:amd64 (3.13.0-83.127), linux-image-3.13.0-105-generic:amd64 (3.13.0-105.152), linux-image-extra-3.13.0-116-generic:amd64 (3.13.0-116.163), linux-headers-3.13.0-63-generic:amd64 (3.13.0-63.103), linux-headers-3.13.0-92-generic:amd64 (3.13.0-92.139), linux-image-extra-3.13.0-79-generic:amd64 (3.13.0-79.123), linux-image-3.13.0-79-generic:amd64 (3.13.0-79.123), linux-headers-3.13.0-100-generic:amd64 (3.13.0-100.147), linux-image-extra-3.13.0-59-generic:amd64 (3.13.0-59.98), linux-image-extra-3.13.0-88-generic:amd64 (3.13.0-88.135), linux-image-extra-3.13.0-105-generic:amd64 (3.13.0-105.152), linux-image-3.13.0-59-generic:amd64 (3.13.0-59.98), linux-image-3.13.0-88-generic:amd64 (3.13.0-88.135), linux-image-extra-3.13.0-68-generic:amd64 (3.13.0-68.111), linux-image-3.13.0-68-generic:amd64 (3.13.0-68.111), linux-headers-3.13.0-61-generic:amd64 (3.13.0-61.100), linux-image-extra-3.13.0-77-generic:amd64 (3.13.0-77.121), linux-image-3.13.0-112-generic:amd64 (3.13.0-112.159), linux-image-3.13.0-77-generic:amd64 (3.13.0-77.121), linux-image-extra-3.13.0-57-generic:amd64 (3.13.0-57.95), linux-image-extra-3.13.0-86-generic:amd64 (3.13.0-86.131), linux-image-3.13.0-57-generic:amd64 (3.13.0-57.95), linux-image-3.13.0-86-generic:amd64 (3.13.0-86.131), linux-image-extra-3.13.0-66-generic:amd64 (3.13.0-66.108), linux-image-3.13.0-101-generic:amd64 (3.13.0-101.148), linux-image-extra-3.13.0-95-generic:amd64 (3.13.0-95.142), linux-image-extra-3.13.0-112-generic:amd64 (3.13.0-112.159), linux-headers-3.13.0-79-generic:amd64 (3.13.0-79.123), linux-image-3.13.0-66-generic:amd64 (3.13.0-66.108), linux-image-3.13.0-95-generic:amd64 (3.13.0-95.142), linux-headers-3.13.0-59-generic:amd64 (3.13.0-59.98), linux-headers-3.13.0-116-generic:amd64 (3.13.0-116.163), linux-headers-3.13.0-88-generic:amd64 (3.13.0-88.135), linux-image-extra-3.13.0-55-generic:amd64 (3.13.0-55.94), linux-headers-3.13.0-51:amd64 (3.13.0-51.84), linux-headers-3.13.0-53:amd64 (3.13.0-53.89), linux-headers-3.13.0-55:amd64 (3.13.0-55.94), linux-headers-3.13.0-57:amd64 (3.13.0-57.95), linux-headers-3.13.0-58:amd64 (3.13.0-58.97), linux-headers-3.13.0-59:amd64 (3.13.0-59.98), linux-image-extra-3.13.0-101-generic:amd64 (3.13.0-101.148), linux-headers-3.13.0-68-generic:amd64 (3.13.0-68.111), linux-image-3.13.0-55-generic:amd64 (3.13.0-55.94), linux-headers-3.13.0-61:amd64 (3.13.0-61.100), linux-headers-3.13.0-62:amd64 (3.13.0-62.102), linux-headers-3.13.0-63:amd64 (3.13.0-63.103), linux-headers-3.13.0-65:amd64 (3.13.0-65.106), linux-headers-3.13.0-66:amd64 (3.13.0-66.108), linux-headers-3.13.0-67:amd64 (3.13.0-67.110), linux-headers-3.13.0-68:amd64 (3.13.0-68.111), linux-image-3.13.0-119-generic:amd64 (3.13.0-119.166), linux-headers-3.13.0-71:amd64 (3.13.0-71.114), linux-headers-3.13.0-73:amd64 (3.13.0-73.116), linux-headers-3.13.0-74:amd64 (3.13.0-74.118), linux-headers-3.13.0-76:amd64 (3.13.0-76.120), linux-headers-3.13.0-77:amd64 (3.13.0-77.121), linux-headers-3.13.0-79:amd64 (3.13.0-79.123), linux-headers-3.13.0-105-generic:amd64 (3.13.0-105.152), linux-headers-3.13.0-77-generic:amd64 (3.13.0-77.121), linux-headers-3.13.0-83:amd64 (3.13.0-83.127), linux-headers-3.13.0-85:amd64 (3.13.0-85.129), linux-headers-3.13.0-86:amd64 (3.13.0-86.131), linux-headers-3.13.0-87:amd64 (3.13.0-87.133), linux-headers-3.13.0-88:amd64 (3.13.0-88.135), linux-image-extra-3.13.0-73-generic:amd64 (3.13.0-73.116), linux-headers-3.13.0-57-generic:amd64 (3.13.0-57.95), linux-headers-3.13.0-91:amd64 (3.13.0-91.138), linux-headers-3.13.0-92:amd64 (3.13.0-92.139), linux-headers-3.13.0-95:amd64 (3.13.0-95.142), linux-headers-3.13.0-96:amd64 (3.13.0-96.143), linux-headers-3.13.0-86-generic:amd64 (3.13.0-86.131), linux-headers-3.13.0-98:amd64 (3.13.0-98.145), linux-image-3.13.0-73-generic:amd64 (3.13.0-73.116), linux-image-extra-3.13.0-53-generic:amd64 (3.13.0-53.89), linux-image-extra-3.13.0-119-generic:amd64 (3.13.0-119.166), linux-headers-3.13.0-66-generic:amd64 (3.13.0-66.108), linux-image-3.13.0-53-generic:amd64 (3.13.0-53.89), linux-headers-3.13.0-95-generic:amd64 (3.13.0-95.142), linux-image-extra-3.13.0-62-generic:amd64 (3.13.0-62.102), linux-image-extra-3.13.0-91-generic:amd64 (3.13.0-91.138), linux-image-3.13.0-62-generic:amd64 (3.13.0-62.102), linux-image-3.13.0-91-generic:amd64 (3.13.0-91.138), linux-image-extra-3.13.0-71-generic:amd64 (3.13.0-71.114), linux-headers-3.13.0-55-generic:amd64 (3.13.0-55.94), linux-headers-3.13.0-112-generic:amd64 (3.13.0-112.159), linux-image-3.13.0-71-generic:amd64 (3.13.0-71.114), linux-image-3.13.0-106-generic:amd64 (3.13.0-106.153), linux-image-extra-3.13.0-51-generic:amd64 (3.13.0-51.84), linux-image-3.13.0-51-generic:amd64 (3.13.0-51.84), linux-headers-3.13.0-101-generic:amd64 (3.13.0-101.148), linux-headers-3.13.0-73-generic:amd64 (3.13.0-73.116), linux-image-extra-3.13.0-106-generic:amd64 (3.13.0-106.153), linux-headers-3.13.0-53-generic:amd64 (3.13.0-53.89), linux-image-extra-3.13.0-98-generic:amd64 (3.13.0-98.145), linux-headers-3.13.0-62-generic:amd64 (3.13.0-62.102), linux-image-3.13.0-98-generic:amd64 (3.13.0-98.145), linux-headers-3.13.0-91-generic:amd64 (3.13.0-91.138), linux-headers-3.13.0-100:amd64 (3.13.0-100.147), linux-headers-3.13.0-101:amd64 (3.13.0-101.148), linux-headers-3.13.0-105:amd64 (3.13.0-105.152), linux-headers-3.13.0-106:amd64 (3.13.0-106.153), linux-headers-3.13.0-112:amd64 (3.13.0-112.159), linux-headers-3.13.0-119-generic:amd64 (3.13.0-119.166), linux-headers-3.13.0-116:amd64 (3.13.0-116.163), linux-headers-3.13.0-119:amd64 (3.13.0-119.166), linux-headers-3.13.0-71-generic:amd64 (3.13.0-71.114), linux-image-extra-3.13.0-58-generic:amd64 (3.13.0-58.97), linux-image-extra-3.13.0-87-generic:amd64 (3.13.0-87.133), linux-image-3.13.0-58-generic:amd64 (3.13.0-58.97), linux-headers-3.13.0-51-generic:amd64 (3.13.0-51.84), linux-image-3.13.0-87-generic:amd64 (3.13.0-87.133), linux-image-extra-3.13.0-67-generic:amd64 (3.13.0-67.110), linux-image-extra-3.13.0-96-generic:amd64 (3.13.0-96.143), linux-image-3.13.0-67-generic:amd64 (3.13.0-67.110), linux-image-3.13.0-96-generic:amd64 (3.13.0-96.143), linux-image-extra-3.13.0-76-generic:amd64 (3.13.0-76.120)
End-Date: 2017-08-17 16:14:29Merci
Dernière modification par philoeil (Le 28/08/2017, à 21:56)
Hors ligne
#58 Le 28/08/2017, à 22:16
- moko138
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Les corrections de fstab ont fonctionné.
Mais certains des 1ers secteurs de ton disque sont dégradés.
(secteurs 8, 16, 25, 56 dans le MBR, et 64 en début de partition).
Extraits :
sudo cat /var/log/dmesg
[ 4.760389] end_request: I/O error, dev sda, sector 8
[ 4.760393] Buffer I/O error on device sda, logical block 1
[ 34.632388] end_request: I/O error, dev sda, sector 16
[ 34.632392] Buffer I/O error on device sda, logical block 2
[ 15.636368] end_request: I/O error, dev sda, sector 25
[ 15.636370] Buffer I/O error on device sda, logical block 3
[ 21.072369] end_request: I/O error, dev sda, sector 56
[ 21.072371] Buffer I/O error on device sda, logical block 7
[ 22.405119] res 51/40:00:38:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
[ 22.428341] Sense Key : Medium Error [current] [descriptor]
[ 22.428360] Add. Sense: Unrecovered read error - auto reallocate failed
[ 37.348386] end_request: I/O error, dev sda, sector 64
[ 37.348389] Buffer I/O error on device sda, logical block 8Ce qui m'étonne,
a) c'est que smartctl (en #48, ./viewtopic.php?pid=21785755#p21785755 ) n'en montre presque rien, sinon
199 UDMA_CRC_Error_Count 0x0008 199 198 000 Old_age 1
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail 12en.wikipedia.org a écrit :
203 : The number of errors caused by incorrect checksum during the error correction.
et b) c'est que tu arrives à démarrer ta session en tty.
/!!\ Ta priorité est donc de sauvegarder sur un autre disque les 75 Gio de données (du moins les plus précieuses) que contient ton home.
Ton Maxtor 250 Go, n'étant plus sûr, doit être réformé.
- - - - -
/var/log/apt/history.log démarre au 1er août alors que tes soucis ont démarré le 23/7 ou un peu avant.
Après la sauvegarde, par acquit de conscience, si tu veux, tu pourras donner le contenu nouveau de titi45.txt
depuis ta session, clef montée, exécute
cd /media/Dusb; echo 'zless /var/log/apt/history.log.1.gz' > titi45.txt; zless /var/log/apt/history.log.1.gz >> titi45.txtça va écraser le fichier titi45.txt sur ta clef.
Ensuite,
depuis n'importe quel système opérationnel,
tu colleras ici le nouveau contenu de titi45.txt
Mais bon : ta priorité est la sauvegarde de tes données.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#59 Le 29/08/2017, à 21:06
- philoeil
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Bonjour,
Merci du diagnostique.
Donc il serait bon de faire une dernière sauvegarde du disque de 250 go sur un disque externe. (il va me faloir un peu de temps ou un peu d'aide pour aller plus vite)
habituellement je sauvegarde avec grsync mais là c'est pas possible...
Peut-on m'aider à faire la commande de sauvegarde de tout ce qui se trouve sur ddur Maxtor 250go avant de le formater et diagnostiquer si ce disque est mort ou utilisable ?
J'ai un petit sentiment d'urgence car je vois de plus en plus de messages d'erreurs de lecture ( je n'ai pas relevé le détail de ce qui s'affiche)
J'ai lancé gparted pour me remettre en mémoire ce que contient ce disque. Il a mis un temps long pour sortir le bilan (sans doute du aux erreurs disque)
résultat
Le peripherique Sda (ATA Maxtor 6L250S0) (233 Go) a
une partition sda1 ntfs 39 Go (étiquette 2_Prog_files) qui contient des programmes windows d'installation ou d'execution drapeau boot
et une partition sda2 extended 193 Go drapeau lba
qui contient sda7 ext4 37Go ; sda5 ext4 109 Go; sda6 ntfs etiquette 2_VideoActif(G) 43 Go contient des videos ; sda8 linux swap 4 Go
J'aimerai voir ce qu'il y a précisément en sda 6 et sda 1
et sauvegarder ce qu'il faut
sauvegarder le home serait pas mal non plus pour les différentes configurations de programmes. la derniere sauvegarde de home date de plus d'1 an (je sais c'est pas bien, mais bon, il n'y a rien d'indispensable dans ces
"home" là)
sur ATA Maxtor 6Y120L0 (114,5 Go) il y a
SDC2 (2Mo) ntfs
sdc3 (114 Go) drapeau boot ntfs drapeau boot avec un signal de danger (Avertissement de Gparted : Error reading $MFT: input/output error failed to load $MFT: input/output error
failed to mount 'dev/sd3' input/output error NTFS is inconsistent. run chkdsk/f on windows then reboot it TWICE! .... impossible de lire le contenu du systeme de fichiers... La raison peut être l'absence de paquet logiciel. voici
la liste des paquets logiciels nécessaires pour la prise en charge de fichiers ntfs : ntfsprogs."
N'Y A T'IL PAS UNE INCOHERENCE AVEC LE DIAGNOSTIQUE; TU PARLAIS DU DISQUE 250 Go et GPARTED parle d'un problème sur le disque 114 Go ?
Sur ATA SAMSUNG HD400LJ 372 Go
sdb1 ntfs etiquette : 1Windows(C) 43 Go sert au lancement prog windows
sdb2 extended
reparti en sdb5 ntfs etiquette 1_DataActif 126 Go contient les données
sdb6 ntfs etiquette 1_jeux 78,2 Go contient les jeux et sauvegardes
sdb7 ntfs 1_imageActif 58,5 Go contient des images, videos
Qu'en penses-tu ?
Merci
Hors ligne
#60 Le 30/08/2017, à 11:09
- moko138
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Oups !
Bravo pour ta vigilance !
Extraits de titi23.txt :
sudo cat /var/log/dmesg
[ 1.228927] sd 0:0:1:0: [sda] 240121728 512-byte logical blocks: (122 GB/114 GiB)
[ 4.760389] end_request: I/O error, dev sda, sector 8Tu as raison, c'est le disque de 122 Go qui est mal en point ! Pas celui qui porte les données que je t'indiquais plus haut.
D'où le peu d'indicateurs défavorables dans le rapport smartctl du Maxtor 250 Go.
- -
/!\ Montre déjà :
sudo lsblk -o name,fstype,size,label,uuid,mountpoint- -
Attention ! Une partition ntfs se soigne depuis windows ! Cf. "Maintenance des supports de stockage et des micrologiciels": ./viewtopic.php?pid=21445261
Est-ce que ton windows ou un de tes windows démarrent ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#61 Le 30/08/2017, à 17:47
- philoeil
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Bonjour,
Oui le windows démarre "normalement"
Je vois les partitions des 2 disques
Sda (ATA Maxtor 6L250S0) (233 Go) visible et accessible
ATA SAMSUNG HD400LJ 372 Go (contient windows) et le programmes
et je pense lié sur ATA Maxtor 6Y120L0 les 2 "disques local" E et F sur lesquels il y a des problèmes
E = 2Mo est accessible
F Windows me propose de formater
Il faut que je retrouve ce qu'il y avait dedans, je dois avoir le contenu dans une sauvegarde si c'est lié à Windows ou alors c'est un dique qui fonctionne pour xubuntu ?
(si c'est lié à Windows il me faut un peu de temps pour m'y retrouver mais je pense qu'il n'y a rien d'important) (j'avais en 2016 déplacé windows de ce disque car il posait des problème, je pense qu'il va finir à la poubelle)
Le retour demandé
/!\ Montre déjà :
sudo lsblk -o name,fstype,size,label,uuid,mountpoint
NAME FSTYPE SIZE LABEL UUID MOUNTPOINT
sda 114,5G
├─sda2 ntfs 2M 54A6EB745CA4B4BC
└─sda3 114,5G
sdb 232,9G
├─sdb1 ntfs 39,3G 2_Prog_files(D) 7E14CBFC14CBB605
├─sdb2 1K
├─sdb5 ext4 109,1G c7465b27-cfec-4f73-b171-dfc94cca34f2 /home
├─sdb6 ntfs 43,2G 2_VideoActif(G) 8064ADBD64ADB5F6
├─sdb7 ext4 37,2G 98bb42d7-6aae-43c9-8c15-07429294faad /
└─sdb8 swap 4,1G 0e07b0d6-cbbf-4dc5-8f86-4f560f1bb818 [SWAP]
sdc 372,6G
├─sdc1 ntfs 108,8G 1 windows(C) 48F4F527F4F517C0
├─sdc2 1K
├─sdc5 ntfs 126,1G 1_DataActif 79EC7D3D53F9F6C2 /mnt/79EC7D3D53F9F6C2
├─sdc6 ntfs 78,2G 1_Jeux 7471598B5DC307EC
└─sdc7 ntfs 59,5G 1_ImageActif 0F9948E747063F59
sdd 7,2G
└─sdd1 vfat 7,2G MYUSBCAST E645-4AF9 /media/Dusb
sr0 1024M
sr1 1024M Avant d'afficher ce résultat il y a toute une serie d'erreur qui s'affiche à l'ecran
Je n'arrive pas encore à copier coller correctement ce qui s'affiche
ci-dessous suite à une mauvaise manip un retour tronqué et foireux des messages affichés mais l'esprit y est (j'ai malencontreusement copier les message d'erreur et collé en commande
(je ne sais pas vraiment comment) puis j'ai collé vers nano mais je ne sais pas comment je me retrouve avec cette suite de commande au lieu d'avoir simplement les message d'erreur.
(Désolé je ne sais pas comment mieux m'expliquer)
j'ai obtenu ce resultat mais apres j'ai perdu l'acces aux message de la fenetre du terminal. d'ou cette copie "foireuse":
phil@PHILNOIR:/media/Dusb$ [ 600.092062] res 51/40:00:10:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
-bash: Erreur de syntaxe près du symbole inattendu « ( »
phil@PHILNOIR:/media/Dusb$ [ 600.092872] ata1.01: status: { DRDY ERR }
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 600.093347] ata1.01: error: { UNC }
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 600.116602] end_request: I/O error, dev sda, sector 16
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 601.452583] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 601.452965] ata1.01: BMDMA stat 0x64
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 601.453309] ata1.01: failed command: READ DMA
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 601.453648] ata1.01: cmd c8/00:08:10:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 601.453648] res 51/40:00:10:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
-bash: Erreur de syntaxe près du symbole inattendu « ( »
phil@PHILNOIR:/media/Dusb$ [ 601.454544] ata1.01: status: { DRDY ERR }
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 601.454980] ata1.01: error: { UNC }
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 601.476547] end_request: I/O error, dev sda, sector 16
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 601.476931] Buffer I/O error on device sda, logical block 2
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 602.805945] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 602.806333] ata1.01: BMDMA stat 0x64
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 602.806676] ata1.01: failed command: READ DMA
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 602.807019] ata1.01: cmd c8/00:08:10:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 602.807019] res 51/40:00:10:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
-bash: Erreur de syntaxe près du symbole inattendu « ( »
phil@PHILNOIR:/media/Dusb$ [ 602.807871] ata1.01: status: { DRDY ERR }
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 602.808379] ata1.01: error: { UNC }
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 602.832479] end_request: I/O error, dev sda, sector 16
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 602.832867] Buffer I/O error on device sda, logical block 2
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 604.167643] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 604.168090] ata1.01: BMDMA stat 0x64
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 604.168446] ata1.01: failed command: READ DMA
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 604.168798] ata1.01: cmd c8/00:08:10:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 604.168798] res 51/40:00:10:00:00/00:00:00:00:00/f0 Emask 0x9 (media error)
-bash: Erreur de syntaxe près du symbole inattendu « ( »
phil@PHILNOIR:/media/Dusb$ [ 604.169582] ata1.01: status: { DRDY ERR }
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 604.170055] ata1.01: error: { UNC }
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 604.197347] end_request: I/O error, dev sda, sector 16
-bash: [: « ] » manquant
phil@PHILNOIR:/media/Dusb$ [ 604.197746] Buffer I/O error on device sda, logical block 2
essaiPeux-tu me confirmer si je peux éliminer le disque ATA Maxtor 6Y120L0 ? ou xubuntu en a-t-il besoin?
Pour rappel le problème est apparu apres une mise à jour de xubuntu est-on sur que le problème est lié au disfonctionnement de ce disque ATA Maxtor 6Y120L0
Merci
Hors ligne
#62 Le 01/09/2017, à 21:43
- philoeil
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Bonjour,
Un petit up pour avoir des nouvelles ?
merci
Hors ligne
#63 Le 02/09/2017, à 05:23
- moko138
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Peux-tu me confirmer si je peux éliminer le disque ATA Maxtor 6Y120L0 ? ou xubuntu en a-t-il besoin?
Tu as, sans compter la clef en sdd, trois disques.
Le Maxtor (il y a deux mois, ./viewtopic.php?pid=21759003#p21759003 (*)) :
produit: Maxtor 6Y120L0
fabriquant: Maxtor
identifiant matériel: 0.1.0
information bus: scsi@0:0.1.0
nom logique: /dev/sda
version: YAR4
numéro de série: Y344MEKE
taille: 114GiB (122GB)Aucune de ses deux partitions n'est dans le fstab provisoire (cf. #57), donc débrancher physiquement ce Maxtor ne gênera pas Xubuntu.
En revanche, tu as un autre Maxtor :
produit: Maxtor 6L250S0
fabriquant: Maxtor
identifiant matériel: 0.0.0
information bus: scsi@6:0.0.0
nom logique: /dev/sdb
numéro de série: L590ZWHG
taille: 232GiB (250GB)et celui-là porte (entre autres) ta Xubuntu.
Donc laisse bien en place le Maxtor 6L250S0 de 250 Go et le Samsung !
(*) En regardant attentivement le lshw d'il y a deux mois, on voit que sda3 était déjà mal en point.
Dernière modification par moko138 (Le 02/09/2017, à 05:24)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#64 Le 02/09/2017, à 15:53
- philoeil
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Bonjour,
Pour info j'ai donc enlevé le disque Maxtor 125Go mais pas de changement je reste bloqué sur la page d'accueil identifiant.
Que puis-je faire d'autre ?
Merci
Hors ligne
#65 Le 05/09/2017, à 18:36
- philoeil
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Bonjour,
Un petit up avant de tenter une réinstallation. J vois rien d'autre en solution ...
Merci
Hors ligne
#66 Le 05/09/2017, à 23:06
- moko138
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Je voulais dire que j'avais à partir de la localisation de ma clef usb momentanément en sdd1 montée celle-ci sur /media/Dusb
Veux-tu dire que tu la montes à la main ?
Et,
comme normalement, sauf désactivation volontaire, ta clef devrait monter automatiquement en /media/toi/MYUSBCAST, veux-tu dire que tu as désactivé le montage automatique ?
- -
Éteins le pc.
Débranche tout hub usb externe et tout disque externe éventuel.
Branche ta clef MYUSBCAST, ta souris et ton clavier.
Démarre.
cd /media/Dusb; echo 'whoami' > titi67.txt; whoami >> titi67.txt; echo >> titi67.txt; echo 'hosts' >> titi67.txt; cat /etc/hosts |head -2 >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'dpkg -l|grep usb' >> titi67.txt; dpkg -l|grep usb >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'lsusb' >> titi67.txt; lsusb >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'ls -la --group-directories-first /media' >> titi67.txt; ls -la --group-directories-first /media >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'ls -la --group-directories-first /media/*' >> titi67.txt; ls -la --group-directories-first /media/* >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'ls -la --group-directories-first /media/*/*' >> titi67.txt; ls -la --group-directories-first /media/*/* >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'fstab' >> titi67.txt; ls -l /etc/fstab >> titi67.txt; echo '==========' >> titi67.txt; cat /etc/fstab >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'sudo cat /var/log/dmesg' >> titi67.txt; sudo cat /var/log/dmesg >> titi67.txt; cd;Avant de coller ici le contenu de titi67.txt, tu vérifieras qu'il ne contient pas de nom de fichier confidentiel. Si besoin, tu remplaceras le nom par des astérisques.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#67 Le 06/09/2017, à 21:51
- philoeil
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Bonjour
Veux-tu dire que tu la montes à la main ?
Oui c'est bien ça...
coller ici le contenu de titi67.txt
whoami
root
1==========
hosts
2==========
dpkg -l|grep usb
ii libgusb2:amd64 0.1.6-5 amd64 GLib wrapper around libusb1
ii libusb-0.1-4:amd64 2:0.1.12-23.3ubuntu1 amd64 userspace USB programming library
ii libusb-1.0-0:amd64 2:1.0.17-1ubuntu2 amd64 userspace USB programming library
ii libusbmuxd2 1.0.8-2ubuntu1 amd64 USB multiplexor daemon for iPhone and iPod Touch devices - library
ii usb-modeswitch 2.1.1+repack0-1ubuntu1 amd64 mode switching tool for controlling "flip flop" USB devices
ii usb-modeswitch-data 20140327-1 all mode switching data for usb-modeswitch
ii usbmuxd 1.0.8-2ubuntu1 amd64 USB multiplexor daemon for iPhone and iPod Touch devices
ii usbutils 1:007-2ubuntu1 amd64 Linux USB utilities
ii xserver-xorg-video-sisusb 1:0.9.6-2build1 amd64 X.Org X server -- SiS USB display driver
3==========
lsusb
Bus 001 Device 005: ID 13fe:4200 Kingston Technology Company Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
4==========
ls -la --group-directories-first /media
total 40
drwxr-xr-x 8 root root 4096 juil. 30 22:46 .
drwxr-xr-x 25 root root 4096 août 30 17:47 ..
drwxr-xr-x 7 phil root 8192 sept. 6 22:27 Dusb
drwxrwxr-x 2 root root 4096 avril 6 2015 floppy0
drwxr-xr-x 2 root root 4096 oct. 17 2015 grub-customizer_recovery_root_mountpoint
drwxr-x---+ 2 root root 4096 déc. 10 2016 juliette
drwxr-x---+ 5 root root 4096 juil. 11 22:15 nad
drwxr-x---+ 5 root root 4096 juil. 9 18:19 phil
-rw-r--r-- 1 root root 72 mai 30 20:31 .created_by_python-fstab
lrwxrwxrwx 1 root root 7 avril 6 2015 floppy -> floppy0
5==========
ls -la --group-directories-first /media/*
lrwxrwxrwx 1 root root 7 avril 6 2015 /media/floppy -> floppy0
/media/Dusb:
total 1004
drwxr-xr-x 7 phil root 8192 sept. 6 22:27 .
drwxr-xr-x 8 root root 4096 juil. 30 22:46 ..
drwxr-xr-x 2 phil root 4096 nov. 2 2016 Black liste
drwxr-xr-x 2 phil root 4096 juil. 31 13:56 CAF
drwxr-xr-x 13 phil root 4096 janv. 9 2017 SyncPodcast
drwxr-xr-x 2 phil root 4096 mars 28 16:14 System Volume Information
drwxr-xr-x 4 phil root 4096 nov. 2 2016 .Trash-1000
-rwxr-xr-x 1 phil root 110 août 28 20:36 280817_cmd2.txt
-rwxr-xr-x 1 phil root 323 août 28 20:35 280817_cmd.txt
-rwxr-xr-x 1 phil root 87 sept. 6 22:23 cm1.txt
-rwxr-xr-x 1 phil root 13 sept. 6 21:47 cm22.txt
-rwxr-xr-x 1 phil root 1374 sept. 6 21:20 cm_60917.txt
-rwxr-xr-x 1 phil root 555 août 16 07:37 cmd160817.txt
-rwxr-xr-x 1 phil root 1359 sept. 6 19:09 cmd60917.txt
-rwxr-xr-x 1 phil root 791 juil. 30 23:35 cmddf.txt
-rwxr-xr-x 1 phil root 0 août 18 20:49 err1908.log
-rwxr-xr-x 1 phil root 0 août 18 20:05 err1908.txt
-rwxr-xr-x 1 phil root 121265 août 28 21:01 erreur_titi23.txt
-rwxr-xr-x 1 phil root 88 sept. 6 21:12 Ess1.txt
-rwxr-xr-x 1 phil root 3627 août 30 17:55 essai.txt
-rwxr-xr-x 1 phil root 0 août 18 20:48 ex5
-rwxr-xr-x 1 phil root 60 août 18 20:48 ex5err.txt
-rwxr-xr-x 1 phil root 919 août 27 09:17 fstab
-rwxr-xr-x 1 phil root 42214 août 15 21:29 histo2.txt
-rwxr-xr-x 1 phil root 25258 août 15 21:24 historictiti.txt
-rwxr-xr-x 1 phil root 121265 août 28 20:59 old2_titi23.txt
-rwxr-xr-x 1 phil root 121265 août 28 20:55 oldtiti23.txt
-rwxr-xr-x 1 phil root 2516 août 15 21:00 repo21_1.txt
-rwxr-xr-x 1 phil root 4582 août 8 22:27 reponses080817.txt
-rwxr-xr-x 1 phil root 84 août 15 20:59 repos21_1.txt
-rwxr-xr-x 1 phil root 551 août 17 21:42 ret1_1708.txt
-rwxr-xr-x 1 phil root 1291 août 18 07:18 ret1_1908.txt
-rwxr-xr-x 1 phil root 54 août 27 10:33 ret1_2708.txt
-rwxr-xr-x 1 phil root 0 août 16 21:15 ret160817.txt
-rwxr-xr-x 1 phil root 1080 août 17 07:09 ret170817.txt
-rwxr-xr-x 1 phil root 607 août 17 21:48 ret2_1708.txt
-rwxr-xr-x 1 phil root 724 août 18 18:00 ret2_1908.txt
-rwxr-xr-x 1 phil root 154 août 26 17:45 ret2_260817.txt
-rwxr-xr-x 1 phil root 509 août 27 10:36 ret2_2708.txt
-rwxr-xr-x 1 phil root 0 août 30 17:46 ret2_300817.txt
-rwxr-xr-x 1 phil root 1685 août 30 17:42 ret300817.txt
-rwxr-xr-x 1 phil root 402 août 17 21:52 ret3_1708_.txt
-rwxr-xr-x 1 phil root 1448 août 18 18:02 ret3_1908.txt
-rwxr-xr-x 1 phil root 5465 août 26 21:51 ret3_2608.txt
-rwxr-xr-x 1 phil root 1448 août 18 20:50 Ret4_1908.txt
-rwxr-xr-x 1 phil root 135218 août 26 21:53 ret4_2608.txt
-rwxr-xr-x 1 phil root 54 août 26 19:20 retFstab2608.txt
-rwxr-xr-x 1 phil root 79 août 9 21:01 retour090817.txt
-rwxr-xr-x 1 phil root 1568 août 16 07:43 retour160817.txt
-rwxr-xr-x 1 phil root 15446 août 8 22:19 retourTermLog.txt
-rwxr-xr-x 1 phil root 268 août 1 23:16 soucelist.txt
-rwxr-xr-x 1 phil root 2483 août 1 23:17 source2.txt
-rwxr-xr-x 1 phil root 1841 sept. 6 21:17 titi1_67.txt
-rwxr-xr-x 1 phil root 121265 août 28 21:27 titi23.txt
-rwxr-xr-x 1 phil root 3203 août 15 22:21 titi2.txt
-rwxr-xr-x 1 phil root 5165 août 15 22:40 titi3.txt
-rwxr-xr-x 1 phil root 15289 août 28 21:04 titi45.txt
-rwxr-xr-x 1 phil root 2493 sept. 6 22:28 titi67.txt
-rwxr-xr-x 1 phil root 1841 sept. 6 21:21 titiOLD1_67.txt
-rwxr-xr-x 1 phil root 71331 sept. 6 19:34 titiOld2_67.txt
-rwxr-xr-x 1 phil root 1841 sept. 6 19:57 titiold3_67.txt
-rwxr-xr-x 1 phil root 1840 sept. 6 19:17 titiOld67.txt
-rwxr-xr-x 1 phil root 903 août 15 21:22 titi.txt
-rwxr-xr-x 1 phil root 110 août 1 23:15 uname1.txt
/media/floppy0:
total 8
drwxrwxr-x 2 root root 4096 avril 6 2015 .
drwxr-xr-x 8 root root 4096 juil. 30 22:46 ..
/media/grub-customizer_recovery_root_mountpoint:
total 8
drwxr-xr-x 2 root root 4096 oct. 17 2015 .
drwxr-xr-x 8 root root 4096 juil. 30 22:46 ..
/media/juliette:
total 8
drwxr-x---+ 2 root root 4096 déc. 10 2016 .
drwxr-xr-x 8 root root 4096 juil. 30 22:46 ..
/media/nad:
total 20
drwxr-x---+ 5 root root 4096 juil. 11 22:15 .
drwxr-xr-x 8 root root 4096 juil. 30 22:46 ..
drwxr-xr-x 2 root root 4096 mai 30 19:45 1_ImageActif
drwxr-xr-x 2 root root 4096 mai 30 19:47 1_Jeux
drwxr-xr-x 2 root root 4096 mai 14 21:27 2_Prog_files(D)
/media/phil:
total 20
drwxr-x---+ 5 root root 4096 juil. 9 18:19 .
drwxr-xr-x 8 root root 4096 juil. 30 22:46 ..
drwx------ 2 root root 4096 mai 14 21:27 1 windows(C)
drwxr-xr-x 2 root root 4096 mai 30 20:20 2_VideoActif(G)
drwx------ 2 root root 4096 mai 14 21:27 54A6EB745CA4B4BC
6==========
ls -la --group-directories-first /media/*/*
-rwxr-xr-x 1 phil root 110 août 28 20:36 /media/Dusb/280817_cmd2.txt
-rwxr-xr-x 1 phil root 323 août 28 20:35 /media/Dusb/280817_cmd.txt
-rwxr-xr-x 1 phil root 87 sept. 6 22:23 /media/Dusb/cm1.txt
-rwxr-xr-x 1 phil root 13 sept. 6 21:47 /media/Dusb/cm22.txt
-rwxr-xr-x 1 phil root 1374 sept. 6 21:20 /media/Dusb/cm_60917.txt
-rwxr-xr-x 1 phil root 555 août 16 07:37 /media/Dusb/cmd160817.txt
-rwxr-xr-x 1 phil root 1359 sept. 6 19:09 /media/Dusb/cmd60917.txt
-rwxr-xr-x 1 phil root 791 juil. 30 23:35 /media/Dusb/cmddf.txt
-rwxr-xr-x 1 phil root 0 août 18 20:49 /media/Dusb/err1908.log
-rwxr-xr-x 1 phil root 0 août 18 20:05 /media/Dusb/err1908.txt
-rwxr-xr-x 1 phil root 121265 août 28 21:01 /media/Dusb/erreur_titi23.txt
-rwxr-xr-x 1 phil root 88 sept. 6 21:12 /media/Dusb/Ess1.txt
-rwxr-xr-x 1 phil root 3627 août 30 17:55 /media/Dusb/essai.txt
-rwxr-xr-x 1 phil root 0 août 18 20:48 /media/Dusb/ex5
-rwxr-xr-x 1 phil root 60 août 18 20:48 /media/Dusb/ex5err.txt
-rwxr-xr-x 1 phil root 919 août 27 09:17 /media/Dusb/fstab
-rwxr-xr-x 1 phil root 42214 août 15 21:29 /media/Dusb/histo2.txt
-rwxr-xr-x 1 phil root 25258 août 15 21:24 /media/Dusb/historictiti.txt
-rwxr-xr-x 1 phil root 121265 août 28 20:59 /media/Dusb/old2_titi23.txt
-rwxr-xr-x 1 phil root 121265 août 28 20:55 /media/Dusb/oldtiti23.txt
-rwxr-xr-x 1 phil root 2516 août 15 21:00 /media/Dusb/repo21_1.txt
-rwxr-xr-x 1 phil root 4582 août 8 22:27 /media/Dusb/reponses080817.txt
-rwxr-xr-x 1 phil root 84 août 15 20:59 /media/Dusb/repos21_1.txt
-rwxr-xr-x 1 phil root 551 août 17 21:42 /media/Dusb/ret1_1708.txt
-rwxr-xr-x 1 phil root 1291 août 18 07:18 /media/Dusb/ret1_1908.txt
-rwxr-xr-x 1 phil root 54 août 27 10:33 /media/Dusb/ret1_2708.txt
-rwxr-xr-x 1 phil root 0 août 16 21:15 /media/Dusb/ret160817.txt
-rwxr-xr-x 1 phil root 1080 août 17 07:09 /media/Dusb/ret170817.txt
-rwxr-xr-x 1 phil root 607 août 17 21:48 /media/Dusb/ret2_1708.txt
-rwxr-xr-x 1 phil root 724 août 18 18:00 /media/Dusb/ret2_1908.txt
-rwxr-xr-x 1 phil root 154 août 26 17:45 /media/Dusb/ret2_260817.txt
-rwxr-xr-x 1 phil root 509 août 27 10:36 /media/Dusb/ret2_2708.txt
-rwxr-xr-x 1 phil root 0 août 30 17:46 /media/Dusb/ret2_300817.txt
-rwxr-xr-x 1 phil root 1685 août 30 17:42 /media/Dusb/ret300817.txt
-rwxr-xr-x 1 phil root 402 août 17 21:52 /media/Dusb/ret3_1708_.txt
-rwxr-xr-x 1 phil root 1448 août 18 18:02 /media/Dusb/ret3_1908.txt
-rwxr-xr-x 1 phil root 5465 août 26 21:51 /media/Dusb/ret3_2608.txt
-rwxr-xr-x 1 phil root 1448 août 18 20:50 /media/Dusb/Ret4_1908.txt
-rwxr-xr-x 1 phil root 135218 août 26 21:53 /media/Dusb/ret4_2608.txt
-rwxr-xr-x 1 phil root 54 août 26 19:20 /media/Dusb/retFstab2608.txt
-rwxr-xr-x 1 phil root 79 août 9 21:01 /media/Dusb/retour090817.txt
-rwxr-xr-x 1 phil root 1568 août 16 07:43 /media/Dusb/retour160817.txt
-rwxr-xr-x 1 phil root 15446 août 8 22:19 /media/Dusb/retourTermLog.txt
-rwxr-xr-x 1 phil root 268 août 1 23:16 /media/Dusb/soucelist.txt
-rwxr-xr-x 1 phil root 2483 août 1 23:17 /media/Dusb/source2.txt
-rwxr-xr-x 1 phil root 1841 sept. 6 21:17 /media/Dusb/titi1_67.txt
-rwxr-xr-x 1 phil root 121265 août 28 21:27 /media/Dusb/titi23.txt
-rwxr-xr-x 1 phil root 3203 août 15 22:21 /media/Dusb/titi2.txt
-rwxr-xr-x 1 phil root 5165 août 15 22:40 /media/Dusb/titi3.txt
-rwxr-xr-x 1 phil root 15289 août 28 21:04 /media/Dusb/titi45.txt
-rwxr-xr-x 1 phil root 7423 sept. 6 22:29 /media/Dusb/titi67.txt
-rwxr-xr-x 1 phil root 1841 sept. 6 21:21 /media/Dusb/titiOLD1_67.txt
-rwxr-xr-x 1 phil root 71331 sept. 6 19:34 /media/Dusb/titiOld2_67.txt
-rwxr-xr-x 1 phil root 1841 sept. 6 19:57 /media/Dusb/titiold3_67.txt
-rwxr-xr-x 1 phil root 1840 sept. 6 19:17 /media/Dusb/titiOld67.txt
-rwxr-xr-x 1 phil root 903 août 15 21:22 /media/Dusb/titi.txt
-rwxr-xr-x 1 phil root 110 août 1 23:15 /media/Dusb/uname1.txt
/media/Dusb/Black liste:
total 1188576
drwxr-xr-x 2 phil root 4096 nov. 2 2016 .
drwxr-xr-x 7 phil root 8192 sept. 6 22:27 ..
-rwxr-xr-x 1 phil root 42809472 oct. 27 2012 12685-17.10.2012-ITEMA_20411260-0.mp3
-rwxr-xr-x 1 phil root 44277995 sept. 23 2012 12685-18.09.2012-ITEMA_20401628-0.mp3
-rwxr-xr-x 1 phil root 43802752 oct. 27 2012 12685-18.10.2012-ITEMA_20411602-0.mp3
-rwxr-xr-x 1 phil root 42494080 déc. 23 2012 12685-18.12.2012-ITEMA_20431124-0.mp3
-rwxr-xr-x 1 phil root 42398018 sept. 23 2012 12685-19.09.2012-ITEMA_20401982-0.mp3
-rwxr-xr-x 1 phil root 43360384 oct. 27 2012 12685-19.10.2012-ITEMA_20411944-0.mp3
-rwxr-xr-x 1 phil root 43008128 déc. 23 2012 12685-19.12.2012-ITEMA_20431499-0.mp3
-rwxr-xr-x 1 phil root 43384960 nov. 25 2012 12685-20.11.2012-ITEMA_20422060-0.mp3
-rwxr-xr-x 1 phil root 43718784 nov. 25 2012 12685-21.11.2012-ITEMA_20422416-0.mp3
-rwxr-xr-x 1 phil root 43313280 déc. 23 2012 12685-21.12.2012-ITEMA_20432233-0.mp3
-rwxr-xr-x 1 phil root 44490880 nov. 25 2012 12685-22.11.2012-ITEMA_20422759-0.mp3
-rwxr-xr-x 1 phil root 43577472 oct. 27 2012 12685-23.10.2012-ITEMA_20413078-0.mp3
-rwxr-xr-x 1 phil root 43444352 nov. 25 2012 12685-23.11.2012-ITEMA_20423110-0.mp3
-rwxr-xr-x 1 phil root 43634816 oct. 27 2012 12685-24.10.2012-ITEMA_20413481-0.mp3
-rwxr-xr-x 1 phil root 43292800 oct. 1 2012 12685-25.09.2012-ITEMA_20403793-0.mp3
-rwxr-xr-x 1 phil root 45033600 oct. 27 2012 12685-25.10.2012-ITEMA_20413827-0.mp3
-rwxr-xr-x 1 phil root 43790464 oct. 1 2012 12685-26.09.2012-ITEMA_20404136-0.mp3
-rwxr-xr-x 1 phil root 43837568 oct. 27 2012 12685-26.10.2012-ITEMA_20414169-0.mp3
-rwxr-xr-x 1 phil root 43612288 oct. 1 2012 12685-27.09.2012-ITEMA_20404473-0.mp3
-rwxr-xr-x 1 phil root 43135104 déc. 1 2012 12685-27.11.2012-ITEMA_20424259-0.mp3
-rwxr-xr-x 1 phil root 43139200 oct. 1 2012 12685-28.09.2012-ITEMA_20405367-0.mp3
-rwxr-xr-x 1 phil root 43479168 déc. 1 2012 12685-28.11.2012-ITEMA_20424611-0.mp3
-rwxr-xr-x 1 phil root 43595904 déc. 1 2012 12685-29.11.2012-ITEMA_20424990-0.mp3
-rwxr-xr-x 1 phil root 42727552 nov. 2 2012 12685-30.10.2012-ITEMA_20415549-0.mp3
-rwxr-xr-x 1 phil root 43700352 déc. 1 2012 12685-30.11.2012-ITEMA_20425404-0.mp3
-rwxr-xr-x 1 phil root 42463360 nov. 2 2012 12685-31.10.2012-ITEMA_20415892-0.mp3
-rwxr-xr-x 1 phil root 43313280 déc. 23 2012 273073201426-6a828346f31e455fbb104b29ba061bdc.mp3
-rwxr-xr-x 1 phil root 44078939 sept. 23 2012 273073201426.mp3
-rwxr-xr-x 1 phil root 60448 nov. 16 2011 art.jpg
-rwxr-xr-x 1 phil root 24917 déc. 23 2012 folder.jpg
/media/Dusb/CAF:
total 1332
drwxr-xr-x 2 phil root 4096 juil. 31 13:56 .
drwxr-xr-x 7 phil root 8192 sept. 6 22:27 ..
-rwxr-xr-x 1 phil root 1348555 juil. 31 13:50 CCF_000021.pdf
/media/Dusb/SyncPodcast:
total 68
drwxr-xr-x 13 phil root 4096 janv. 9 2017 .
drwxr-xr-x 7 phil root 8192 sept. 6 22:27 ..
drwxr-xr-x 2 phil root 8192 mai 24 20:53 autantempHistoire
drwxr-xr-x 2 phil root 4096 janv. 9 2017 Carrefour de Lodeon
drwxr-xr-x 2 phil root 4096 mai 24 20:46 Continent Musique
drwxr-xr-x 2 phil root 4096 mai 24 20:46 cont sciences
drwxr-xr-x 2 phil root 4096 mai 24 20:51 ConvScientifique
drwxr-xr-x 2 phil root 12288 mai 24 20:52 Philosophie
drwxr-xr-x 2 phil root 4096 nov. 2 2016 Playlists
drwxr-xr-x 2 phil root 4096 nov. 2 2016 Radioscopie
drwxr-xr-x 2 phil root 4096 nov. 2 2016 Repliques
drwxr-xr-x 2 phil root 4096 nov. 2 2016 Savanturiers
drwxr-xr-x 2 phil root 4096 janv. 9 2017 Very Good Trip
/media/Dusb/System Volume Information:
total 16
drwxr-xr-x 2 phil root 4096 mars 28 16:14 .
drwxr-xr-x 7 phil root 8192 sept. 6 22:27 ..
-rwxr-xr-x 1 phil root 76 mars 28 16:14 IndexerVolumeGuid
/media/nad/1_ImageActif:
total 8
drwxr-xr-x 2 root root 4096 mai 30 19:45 .
drwxr-x---+ 5 root root 4096 juil. 11 22:15 ..
/media/nad/1_Jeux:
total 8
drwxr-xr-x 2 root root 4096 mai 30 19:47 .
drwxr-x---+ 5 root root 4096 juil. 11 22:15 ..
/media/nad/2_Prog_files(D):
total 8
drwxr-xr-x 2 root root 4096 mai 14 21:27 .
drwxr-x---+ 5 root root 4096 juil. 11 22:15 ..
/media/phil/1 windows(C):
total 8
drwx------ 2 root root 4096 mai 14 21:27 .
drwxr-x---+ 5 root root 4096 juil. 9 18:19 ..
/media/phil/2_VideoActif(G):
total 8
drwxr-xr-x 2 root root 4096 mai 30 20:20 .
drwxr-x---+ 5 root root 4096 juil. 9 18:19 ..
/media/phil/54A6EB745CA4B4BC:
total 8
drwx------ 2 root root 4096 mai 14 21:27 .
drwxr-x---+ 5 root root 4096 juil. 9 18:19 ..
==========
fstab
-rw-r--r-- 1 root root 919 août 27 10:20 /etc/fstab
==========
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
#Entry for /dev/sdb7 :
UUID=98bb42d7-6aae-43c9-8c15-07429294faad / ext4 errors=remount-ro 0 1
#
#Entry for /dev/sdb5 :
UUID=c7465b27-cfec-4f73-b171-dfc94cca34f2 /home ext4 defaults 0 2
#
# swap sur sdb8
UUID=0e07b0d6-cbbf-4dc5-8f86-4f560f1bb818 none swap sw 0 0
#
# Entry for /dev/sdc5 :
UUID=79EC7D3D53F9F6C2 /mnt/79EC7D3D53F9F6C2 ntfs-3g defaults,locale=fr_FR.UTF-8,nofail,uid=1000,gid=1000,windows_names 0 0
#
# Entry for /dev/sdc1 :
#UUID=48F4F527F4F517C0 /media/phil/1_windows_C ntfs-3g defaults,locale=fr_FR.UTF-8,nofail,uid=1000,gid=1000,windows_names 0 0
#
# Entry for /dev/sdb1 (antérieurement montée sur /media/nad) :
#UUID=7E14CBFC14CBB605 /media/phil/2_Prog_files_D ntfs-3g defaults,locale=fr_FR.UTF-8,nofail,uid=1000,gid=1000,windows_names 0 0
#
==========
sudo cat /var/log/dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-128-generic (buildd@lgw01-39) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #177-Ubuntu SMP Tue Aug 8 11:40:23 UTC 2017 (Ubuntu 3.13.0-128.177-generic 3.13.11-ckt39)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-128-generic root=UUID=98bb42d7-6aae-43c9-8c15-07429294faad ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/A8N-SLI Premium, BIOS ASUS A8N-SLI Premium ACPI BIOS Revision 1303 08/10/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f5880-0x000f588f] mapped at [ffff8800000f5880]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7ffeffff]
[ 0.000000] [mem 0x7fe00000-0x7ffeffff] page 4k
[ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35b26000-0x36d8afff]
[ 0.000000] ACPI: RSDP 00000000000f7c60 000014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 000000007fff3040 000030 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 000000007fff30c0 000074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 000000007fff3180 006A16 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000000007fff0000 000040
[ 0.000000] ACPI: MCFG 000000007fff9cc0 00003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 000000007fff9c00 00007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffeffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ffeffff]
[ 0.000000] NODE_DATA [mem 0x7ffeb000-0x7ffeffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffeffff]
[ 0.000000] On node 0 totalpages: 524174
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8128 pages used for memmap
[ 0.000000] DMA32 zone: 520176 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s81536 r8192 d20864 u1048576
[ 0.000000] pcpu-alloc: s81536 r8192 d20864 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515961
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-128-generic root=UUID=98bb42d7-6aae-43c9-8c15-07429294faad ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 19c000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 2028228K/2096696K available (7433K kernel code, 1147K rwdata, 3424K rodata, 1340K init, 1448K bss, 68468K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2010.233 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.008008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.46 BogoMIPS (lpj=8040932)
[ 0.008012] pid_max: default: 32768 minimum: 301
[ 0.008074] Security Framework initialized
[ 0.008118] AppArmor: AppArmor initialized
[ 0.008120] Yama: becoming mindful.
[ 0.008482] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.013437] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.014942] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.014950] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.015463] Initializing cgroup subsys memory
[ 0.015484] Initializing cgroup subsys devices
[ 0.015488] Initializing cgroup subsys freezer
[ 0.015491] Initializing cgroup subsys blkio
[ 0.015494] Initializing cgroup subsys perf_event
[ 0.015497] Initializing cgroup subsys hugetlb
[ 0.015531] tseg: 0000000000
[ 0.015544] mce: CPU supports 5 MCE banks
[ 0.015562] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.015562] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.015562] tlb_flushall_shift: 4
[ 0.028236] ACPI: Core revision 20131115
[ 0.032633] ACPI: All ACPI Tables successfully acquired
[ 0.033962] ftrace: allocating 28676 entries in 113 pages
[ 0.052510] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.060000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.060000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.060000] ..... (found apic 0 pin 0) ...
[ 0.068000] ....... failed.
[ 0.068000] ...trying to set up timer as Virtual Wire IRQ...
[ 0.068000] ..... failed.
[ 0.068000] ...trying to set up timer as ExtINT IRQ...
[ 0.110650] ..... works.
[ 0.110652] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 2f, stepping: 00)
[ 0.112000] Performance Events: AMD PMU driver.
[ 0.112000] ... version: 0
[ 0.112000] ... bit width: 48
[ 0.112000] ... generic registers: 4
[ 0.112000] ... value mask: 0000ffffffffffff
[ 0.112000] ... max period: 00007fffffffffff
[ 0.112000] ... fixed-purpose events: 0
[ 0.112000] ... event mask: 000000000000000f
[ 0.112000] x86: Booted up 1 node, 1 CPUs
[ 0.112000] smpboot: Total of 1 processors activated (4020.46 BogoMIPS)
[ 0.112000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.112000] devtmpfs: initialized
[ 0.116178] EVM: security.selinux
[ 0.116180] EVM: security.SMACK64
[ 0.116181] EVM: security.ima
[ 0.116182] EVM: security.capability
[ 0.116256] PM: Registering ACPI NVS region [mem 0x7fff0000-0x7fff2fff] (12288 bytes)
[ 0.117884] pinctrl core: initialized pinctrl subsystem
[ 0.118003] regulator-dummy: no parameters
[ 0.118041] RTC time: 18:48:12, date: 09/06/17
[ 0.118107] NET: Registered protocol family 16
[ 0.118318] cpuidle: using governor ladder
[ 0.118320] cpuidle: using governor menu
[ 0.118328] node 0 link 0: io port [1000, fffff]
[ 0.118331] TOM: 0000000080000000 aka 2048M
[ 0.118334] node 0 link 0: mmio [e0000000, efffffff]
[ 0.118337] node 0 link 0: mmio [feb00000, fec0ffff]
[ 0.118340] node 0 link 0: mmio [a0000, bffff]
[ 0.118342] node 0 link 0: mmio [80000000, fed3ffff]
[ 0.118346] bus: [bus 00-ff] on node 0 link 0
[ 0.118348] bus: 00 [io 0x0000-0xffff]
[ 0.118349] bus: 00 [mem 0x80000000-0xfcffffffff]
[ 0.118351] bus: 00 [mem 0xfeb00000-0xfec0ffff]
[ 0.118353] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.118411] ACPI: bus type PCI registered
[ 0.118414] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.118510] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.118514] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.128946] PCI: Using configuration type 1 for base access
[ 0.130538] bio: create slab <bio-0> at 0
[ 0.130799] ACPI: Added _OSI(Module Device)
[ 0.130801] ACPI: Added _OSI(Processor Device)
[ 0.130803] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.130805] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.137015] ACPI: Interpreter enabled
[ 0.137031] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.137047] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.137050] ACPI: Using IOAPIC for interrupt routing
[ 0.137085] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.137260] ACPI: No dock devices found.
[ 0.146471] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.146483] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.146492] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.146580] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.146583] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.146586] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.146589] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.146591] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.146595] PCI: root bus 00: hardware-probed resources
[ 0.146931] PCI host bridge to bus 0000:00
[ 0.146935] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.146938] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.146941] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff]
[ 0.146944] pci_bus 0000:00: root bus resource [mem 0xfeb00000-0xfec0ffff]
[ 0.146947] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.146961] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[ 0.147171] pci 0000:00:01.0: [10de:0050] type 00 class 0x060100
[ 0.147193] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.147354] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[ 0.147363] pci 0000:00:01.1: reg 0x10: [io 0xe400-0xe41f]
[ 0.147375] pci 0000:00:01.1: reg 0x20: [io 0x4c00-0x4c3f]
[ 0.147381] pci 0000:00:01.1: reg 0x24: [io 0x4c40-0x4c7f]
[ 0.147396] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.147549] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[ 0.147558] pci 0000:00:02.0: reg 0x10: [mem 0xd6004000-0xd6004fff]
[ 0.147585] pci 0000:00:02.0: supports D1 D2
[ 0.147588] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.147695] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.147744] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[ 0.147753] pci 0000:00:02.1: reg 0x10: [mem 0xfeb00000-0xfeb000ff]
[ 0.147786] pci 0000:00:02.1: supports D1 D2
[ 0.147788] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.147908] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.147960] pci 0000:00:04.0: [10de:0059] type 00 class 0x040100
[ 0.147968] pci 0000:00:04.0: reg 0x10: [io 0xdc00-0xdcff]
[ 0.147973] pci 0000:00:04.0: reg 0x14: [io 0xe000-0xe0ff]
[ 0.147979] pci 0000:00:04.0: reg 0x18: [mem 0xd6003000-0xd6003fff]
[ 0.148011] pci 0000:00:04.0: supports D1 D2
[ 0.148152] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[ 0.148170] pci 0000:00:06.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.148324] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[ 0.148333] pci 0000:00:07.0: reg 0x10: [io 0x09f0-0x09f7]
[ 0.148338] pci 0000:00:07.0: reg 0x14: [io 0x0bf0-0x0bf3]
[ 0.148343] pci 0000:00:07.0: reg 0x18: [io 0x0970-0x0977]
[ 0.148348] pci 0000:00:07.0: reg 0x1c: [io 0x0b70-0x0b73]
[ 0.148354] pci 0000:00:07.0: reg 0x20: [io 0xd800-0xd80f]
[ 0.148359] pci 0000:00:07.0: reg 0x24: [mem 0xd6002000-0xd6002fff]
[ 0.148510] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[ 0.148518] pci 0000:00:08.0: reg 0x10: [io 0x09e0-0x09e7]
[ 0.148523] pci 0000:00:08.0: reg 0x14: [io 0x0be0-0x0be3]
[ 0.148528] pci 0000:00:08.0: reg 0x18: [io 0x0960-0x0967]
[ 0.148533] pci 0000:00:08.0: reg 0x1c: [io 0x0b60-0x0b63]
[ 0.148538] pci 0000:00:08.0: reg 0x20: [io 0xc400-0xc40f]
[ 0.148543] pci 0000:00:08.0: reg 0x24: [mem 0xd6001000-0xd6001fff]
[ 0.148692] pci 0000:00:09.0: [10de:005c] type 01 class 0x060401
[ 0.148807] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.148851] pci 0000:00:0a.0: [10de:0057] type 00 class 0x068000
[ 0.148859] pci 0000:00:0a.0: reg 0x10: [mem 0xd6000000-0xd6000fff]
[ 0.148864] pci 0000:00:0a.0: reg 0x14: [io 0xb000-0xb007]
[ 0.148889] pci 0000:00:0a.0: supports D1 D2
[ 0.148892] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.148999] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.149050] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[ 0.149079] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149187] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.149235] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[ 0.149263] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149374] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.149431] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[ 0.149459] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149567] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.149617] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[ 0.149644] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149752] pci 0000:00:0e.0: System wakeup disabled by ACPI
[ 0.149808] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.149950] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.150094] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.150237] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.150424] pci 0000:05:0a.0: [1095:3114] type 00 class 0x010400
[ 0.150436] pci 0000:05:0a.0: reg 0x10: [io 0x8000-0x8007]
[ 0.150443] pci 0000:05:0a.0: reg 0x14: [io 0x8400-0x8403]
[ 0.150450] pci 0000:05:0a.0: reg 0x18: [io 0x8800-0x8807]
[ 0.150457] pci 0000:05:0a.0: reg 0x1c: [io 0x8c00-0x8c03]
[ 0.150464] pci 0000:05:0a.0: reg 0x20: [io 0x9000-0x900f]
[ 0.150471] pci 0000:05:0a.0: reg 0x24: [mem 0xd5008000-0xd50083ff]
[ 0.150479] pci 0000:05:0a.0: reg 0x30: [mem 0xd4000000-0xd407ffff pref]
[ 0.150497] pci 0000:05:0a.0: supports D1 D2
[ 0.150540] pci 0000:05:0b.0: [104c:8023] type 00 class 0x0c0010
[ 0.150552] pci 0000:05:0b.0: reg 0x10: [mem 0xd5009000-0xd50097ff]
[ 0.150560] pci 0000:05:0b.0: reg 0x14: [mem 0xd5000000-0xd5003fff]
[ 0.150603] pci 0000:05:0b.0: supports D1 D2
[ 0.150605] pci 0000:05:0b.0: PME# supported from D0 D1 D2 D3hot
[ 0.150657] pci 0000:05:0c.0: [11ab:4320] type 00 class 0x020000
[ 0.150670] pci 0000:05:0c.0: reg 0x10: [mem 0xd5004000-0xd5007fff]
[ 0.150678] pci 0000:05:0c.0: reg 0x14: [io 0x9400-0x94ff]
[ 0.150703] pci 0000:05:0c.0: reg 0x30: [mem 0xd4000000-0xd401ffff pref]
[ 0.150726] pci 0000:05:0c.0: supports D1 D2
[ 0.150729] pci 0000:05:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.150786] pci 0000:00:09.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.150789] pci 0000:00:09.0: bridge window [io 0x8000-0x9fff]
[ 0.150793] pci 0000:00:09.0: bridge window [mem 0xd4000000-0xd5ffffff]
[ 0.150796] pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.150799] pci 0000:00:09.0: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[ 0.150802] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfec0ffff] (subtractive decode)
[ 0.150805] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.150844] pci 0000:00:0b.0: PCI bridge to [bus 04]
[ 0.150884] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 0.150924] pci 0000:00:0d.0: PCI bridge to [bus 02]
[ 0.150966] pci 0000:01:00.0: [10de:0640] type 00 class 0x030000
[ 0.150976] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 0.150985] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.150995] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit]
[ 0.151002] pci 0000:01:00.0: reg 0x24: [io 0xa000-0xa07f]
[ 0.151009] pci 0000:01:00.0: reg 0x30: [mem 0xd3000000-0xd307ffff pref]
[ 0.156019] pci 0000:00:0e.0: PCI bridge to [bus 01]
[ 0.156023] pci 0000:00:0e.0: bridge window [io 0xa000-0xafff]
[ 0.156026] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd3ffffff]
[ 0.156030] pci 0000:00:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.156256] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.156321] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.156384] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.156447] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.156509] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.156573] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.156635] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.156699] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.156770] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 0.156833] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.156897] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.156959] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 0.157026] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.157096] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.157170] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.157243] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.157334] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 0.157417] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.157498] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.157580] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.157630] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.157720] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.157809] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.157899] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.157987] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.158076] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.158165] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.158254] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.158343] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.158439] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.158534] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.158628] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.159471] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.159514] Found 1 acpi root devices
[ 0.159736] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.159739] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.159741] vgaarb: loaded
[ 0.159743] vgaarb: bridge control possible 0000:01:00.0
[ 0.160041] SCSI subsystem initialized
[ 0.160139] libata version 3.00 loaded.
[ 0.160167] ACPI: bus type USB registered
[ 0.160201] usbcore: registered new interface driver usbfs
[ 0.160212] usbcore: registered new interface driver hub
[ 0.160248] usbcore: registered new device driver usb
[ 0.160392] PCI: Using ACPI for IRQ routing
[ 0.165553] PCI: pci_cache_line_size set to 64 bytes
[ 0.165571] pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] conflicts with PCI Bus #00 [mem 0xfeb00000-0xfec0ffff]
[ 0.165610] Expanded resource reserved due to conflict with PCI Bus #00
[ 0.165613] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.165616] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[ 0.165764] NetLabel: Initializing
[ 0.165766] NetLabel: domain hash size = 128
[ 0.165767] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.165801] NetLabel: unlabeled traffic allowed by default
[ 0.165964] Switched to clocksource refined-jiffies
[ 0.177627] AppArmor: AppArmor Filesystem Enabled
[ 0.177710] pnp: PnP ACPI init
[ 0.177737] ACPI: bus type PNP registered
[ 0.178020] system 00:00: [io 0x4000-0x407f] has been reserved
[ 0.178023] system 00:00: [io 0x4080-0x40ff] has been reserved
[ 0.178026] system 00:00: [io 0x4400-0x447f] has been reserved
[ 0.178030] system 00:00: [io 0x4480-0x44ff] has been reserved
[ 0.178033] system 00:00: [io 0x4800-0x487f] has been reserved
[ 0.178036] system 00:00: [io 0x4880-0x48ff] has been reserved
[ 0.178042] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178715] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.178718] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.178721] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.178724] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178739] pnp 00:02: [dma 4]
[ 0.178771] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.178823] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.178861] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.178899] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.179085] pnp 00:06: [dma 2]
[ 0.179133] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.179432] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.179935] pnp 00:08: [dma 3]
[ 0.180018] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.180098] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.180372] pnp 00:0a: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.180609] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.180666] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.180670] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.180834] system 00:0d: [mem 0x000f0000-0x000f3fff] could not be reserved
[ 0.180837] system 00:0d: [mem 0x000f4000-0x000f7fff] could not be reserved
[ 0.180840] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.180844] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.180847] system 00:0d: [mem 0x7fff0000-0x7fffffff] could not be reserved
[ 0.180850] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.180853] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.180857] system 00:0d: [mem 0x00100000-0x7ffeffff] could not be reserved
[ 0.180860] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.180863] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.180866] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
[ 0.180870] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.180873] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.180876] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.180880] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.180891] pnp: PnP ACPI: found 14 devices
[ 0.180893] ACPI: bus type PNP unregistered
[ 0.187344] Switched to clocksource acpi_pm
[ 0.187358] pci 0000:05:0c.0: address space collision: [mem 0xd4000000-0xd401ffff pref] conflicts with 0000:05:0a.0 [mem 0xd4000000-0xd407ffff pref]
[ 0.187410] pci 0000:00:09.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref]
[ 0.187414] pci 0000:00:02.1: BAR 0: assigned [mem 0x80100000-0x801000ff]
[ 0.187421] pci 0000:05:0c.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
[ 0.187424] pci 0000:00:09.0: PCI bridge to [bus 05]
[ 0.187428] pci 0000:00:09.0: bridge window [io 0x8000-0x9fff]
[ 0.187431] pci 0000:00:09.0: bridge window [mem 0xd4000000-0xd5ffffff]
[ 0.187435] pci 0000:00:09.0: bridge window [mem 0x80000000-0x800fffff pref]
[ 0.187439] pci 0000:00:0b.0: PCI bridge to [bus 04]
[ 0.187444] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 0.187450] pci 0000:00:0d.0: PCI bridge to [bus 02]
[ 0.187456] pci 0000:00:0e.0: PCI bridge to [bus 01]
[ 0.187459] pci 0000:00:0e.0: bridge window [io 0xa000-0xafff]
[ 0.187462] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd3ffffff]
[ 0.187465] pci 0000:00:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.187471] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.187473] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.187476] pci_bus 0000:00: resource 6 [mem 0xfeb00000-0xfec0ffff]
[ 0.187479] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.187482] pci_bus 0000:05: resource 0 [io 0x8000-0x9fff]
[ 0.187484] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd5ffffff]
[ 0.187487] pci_bus 0000:05: resource 2 [mem 0x80000000-0x800fffff pref]
[ 0.187490] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.187492] pci_bus 0000:05: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.187495] pci_bus 0000:05: resource 6 [mem 0xfeb00000-0xfec0ffff]
[ 0.187497] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.187501] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.187503] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd3ffffff]
[ 0.187506] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.187580] NET: Registered protocol family 2
[ 0.187981] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.187981] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.187981] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.187981] TCP: reno registered
[ 0.187981] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.187981] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.187981] NET: Registered protocol family 1
[ 0.187981] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.260327] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.260489] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260496] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 0.260503] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260507] pci 0000:00:0b.0: Linking AER extended capability
[ 0.260542] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260548] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 0.260555] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260558] pci 0000:00:0c.0: Linking AER extended capability
[ 0.260596] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260601] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 0.260608] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260611] pci 0000:00:0d.0: Linking AER extended capability
[ 0.260652] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260658] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 0.260665] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.260668] pci 0000:00:0e.0: Linking AER extended capability
[ 0.260697] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.260700] PCI: CLS 32 bytes, default 64
[ 0.260826] Trying to unpack rootfs image as initramfs...
[ 0.752731] Freeing initrd memory: 18836K (ffff880035b26000 - ffff880036d8b000)
[ 0.753245] microcode: AMD CPU family 0xf not supported
[ 0.753248] Scanning for low memory corruption every 60 seconds
[ 0.753639] Initialise system trusted keyring
[ 0.753709] audit: initializing netlink socket (disabled)
[ 0.753729] type=2000 audit(1504723692.751:1): initialized
[ 0.789084] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.791042] zbud: loaded
[ 0.791242] VFS: Disk quotas dquot_6.5.2
[ 0.791324] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.792190] fuse init (API version 7.22)
[ 0.792315] msgmni has been set to 3998
[ 0.792418] Key type big_key registered
[ 0.792822] Key type asymmetric registered
[ 0.792824] Asymmetric key parser 'x509' registered
[ 0.792879] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.792918] io scheduler noop registered
[ 0.792920] io scheduler deadline registered (default)
[ 0.792970] io scheduler cfq registered
[ 0.793145] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 0.793214] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 0.793263] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 0.793316] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[ 0.793378] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.793399] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.793457] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.793459] vesafb: scrolling: redraw
[ 0.793462] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.794075] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90010400000, using 5120k, total 5120k
[ 0.800989] Console: switching to colour frame buffer device 160x64
[ 0.807695] fb0: VESA VGA frame buffer device
[ 0.807737] ipmi message handler version 39.2
[ 0.807841] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.807847] ACPI: Power Button [PWRB]
[ 0.807905] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.807908] ACPI: Power Button [PWRF]
[ 0.807960] ACPI: Fan [FAN] (on)
[ 0.808548] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.808551] ACPI: Thermal Zone [THRM] (40 C)
[ 0.808640] GHES: HEST is not enabled!
[ 0.808782] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.829132] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.830763] Linux agpgart interface v0.103
[ 0.832688] brd: module loaded
[ 0.833669] loop: module loaded
[ 0.834308] libphy: Fixed MDIO Bus: probed
[ 0.834445] tun: Universal TUN/TAP device driver, 1.6
[ 0.834447] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.834499] PPP generic driver version 2.4.2
[ 0.834560] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.834566] ehci-pci: EHCI PCI platform driver
[ 0.834803] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 0.834814] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.834825] ehci-pci 0000:00:02.1: debug port 1
[ 0.834863] ehci-pci 0000:00:02.1: cache line size of 32 is not supported
[ 0.834890] ehci-pci 0000:00:02.1: irq 22, io mem 0x80100000
[ 0.844019] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.844100] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.844103] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.844106] usb usb1: Product: EHCI Host Controller
[ 0.844109] usb usb1: Manufacturer: Linux 3.13.0-128-generic ehci_hcd
[ 0.844111] usb usb1: SerialNumber: 0000:00:02.1
[ 0.844252] hub 1-0:1.0: USB hub found
[ 0.844268] hub 1-0:1.0: 10 ports detected
[ 0.844543] ehci-platform: EHCI generic platform driver
[ 0.844558] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.844560] ohci-pci: OHCI PCI platform driver
[ 0.844712] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 0.844719] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.844751] ohci-pci 0000:00:02.0: irq 23, io mem 0xd6004000
[ 0.902041] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.902043] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.902046] usb usb2: Product: OHCI PCI host controller
[ 0.902048] usb usb2: Manufacturer: Linux 3.13.0-128-generic ohci_hcd
[ 0.902051] usb usb2: SerialNumber: 0000:00:02.0
[ 0.902176] hub 2-0:1.0: USB hub found
[ 0.902185] hub 2-0:1.0: 10 ports detected
[ 0.902417] ohci-platform: OHCI generic platform driver
[ 0.902429] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.902519] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.902521] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.903446] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.903591] mousedev: PS/2 mouse device common for all mice
[ 0.903734] rtc_cmos 00:03: RTC can wake from S4
[ 0.903872] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.903896] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram
[ 0.904043] device-mapper: uevent: version 1.0.3
[ 0.904134] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.904145] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.904291] TCP: cubic registered
[ 0.904416] NET: Registered protocol family 10
[ 0.904726] NET: Registered protocol family 17
[ 0.904740] Key type dns_resolver registered
[ 0.904992] Loading compiled-in X.509 certificates
[ 0.906361] Loaded X.509 cert 'Magrathea: Glacier signing key: 82aba0e9db7ab1f53299a7954028d1c1d66a6cf2'
[ 0.906382] registered taskstats version 1
[ 0.909968] Key type trusted registered
[ 0.916146] Key type encrypted registered
[ 0.916156] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.916159] IMA: No TPM chip found, activating TPM-bypass!
[ 0.916450] regulator-dummy: disabling
[ 0.916509] Magic number: 1:167:847
[ 0.916675] rtc_cmos 00:03: setting system clock to 2017-09-06 18:48:13 UTC (1504723693)
[ 0.921086] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[ 0.921088] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[ 0.921187] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.921189] EDD information not available.
[ 0.921236] PM: Hibernation image not present or could not be loaded.
[ 0.924480] Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000)
[ 0.924485] Write protecting the kernel read-only data: 12288k
[ 0.925717] Freeing unused kernel memory: 748K (ffff880001745000 - ffff880001800000)
[ 0.929156] Freeing unused kernel memory: 672K (ffff880001b58000 - ffff880001c00000)
[ 0.932903] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.952331] systemd-udevd[93]: starting version 204
[ 1.022813] Floppy drive(s): fd0 is 1.44M
[ 1.028125] pata_amd 0000:00:06.0: version 0.4.1
[ 1.032270] scsi0 : pata_amd
[ 1.035475] scsi1 : pata_amd
[ 1.035565] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.035568] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.035796] sata_nv 0000:00:07.0: version 3.5
[ 1.036211] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 1.039605] sata_sil 0000:05:0a.0: version 2.4
[ 1.039929] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 1.039976] sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix
[ 1.040220] scsi2 : sata_nv
[ 1.044266] FDC 0 is a post-1991 82077
[ 1.046650] scsi3 : sata_nv
[ 1.046721] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21
[ 1.046724] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21
[ 1.047158] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 1.047562] scsi4 : sata_sil
[ 1.050843] scsi6 : sata_sil
[ 1.052233] scsi5 : sata_nv
[ 1.055918] scsi7 : sata_sil
[ 1.056135] scsi8 : sata_nv
[ 1.056188] ata9: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 20
[ 1.056192] ata10: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 20
[ 1.056772] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.057084] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 1.059345] scsi9 : sata_sil
[ 1.059428] ata5: SATA max UDMA/100 mmio m1024@0xd5008000 tf 0xd5008080 irq 19
[ 1.059432] ata6: SATA max UDMA/100 mmio m1024@0xd5008000 tf 0xd50080c0 irq 19
[ 1.059435] ata7: SATA max UDMA/100 mmio m1024@0xd5008000 tf 0xd5008280 irq 19
[ 1.059438] ata8: SATA max UDMA/100 mmio m1024@0xd5008000 tf 0xd50082c0 irq 19
[ 1.059731] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 1.059793] skge: 1.14 addr 0xd5004000 irq 17 chip Yukon-Lite rev 9
[ 1.060059] skge 0000:05:0c.0 eth0: addr 00:13:d4:ea:dd:2c
[ 1.076410] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 1.132138] firewire_ohci 0000:05:0b.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.212029] usb 1-10: new high-speed USB device number 3 using ehci-pci
[ 1.356023] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.356788] usb 1-10: New USB device found, idVendor=13fe, idProduct=4200
[ 1.356791] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.356794] usb 1-10: Product: USB DISK 2.0
[ 1.356796] usb 1-10: Manufacturer:
[ 1.356799] usb 1-10: SerialNumber: 070849E2E6907089
[ 1.362242] usb-storage 1-10:1.0: USB Mass Storage device detected
[ 1.362363] scsi10 : usb-storage 1-10:1.0
[ 1.362695] usbcore: registered new interface driver usb-storage
[ 1.368338] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
[ 1.368346] ata2.01: ATAPI: TSSTcorpCD-R/RW SH-R522C, TS03, max UDMA/33
[ 1.368355] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
[ 1.368359] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
[ 1.380025] ata5: SATA link down (SStatus 0 SControl 310)
[ 1.384175] ata2.00: configured for UDMA/33
[ 1.392208] ata2.01: configured for UDMA/33
[ 1.398635] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
[ 1.405070] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.405073] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.405207] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.405329] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.409083] scsi 1:0:1:0: CD-ROM TSSTcorp CD-R/RW SH-R522C TS03 PQ: 0 ANSI: 5
[ 1.411817] sr1: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 1.412260] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 1.412486] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 1.524028] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.532108] ata9.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/100
[ 1.532111] ata9.00: 488397168 sectors, multi 1: LBA48 NCQ (not used)
[ 1.548101] ata9.00: configured for UDMA/100
[ 1.580561] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:13:d4:ea:d1:74
[ 1.580565] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 1.632139] firewire_core 0000:05:0b.0: created device fw0: GUID 0011d800006a6978, S400
[ 1.664028] usb 2-4: new low-speed USB device number 2 using ohci-pci
[ 1.724028] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.724221] scsi 5:0:0:0: Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 ANSI: 5
[ 1.724457] sd 5:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.724526] sd 5:0:0:0: [sda] Write Protect is off
[ 1.724529] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.724559] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.724773] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 1.809314] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 1.809849] sd 5:0:0:0: [sda] Attached SCSI disk
[ 1.876086] usb 2-4: New USB device found, idVendor=046d, idProduct=c016
[ 1.876093] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.876096] usb 2-4: Product: Optical USB Mouse
[ 1.876098] usb 2-4: Manufacturer: Logitech
[ 1.884346] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.893706] usbcore: registered new interface driver usbhid
[ 1.893712] usbhid: USB HID core driver
[ 1.896922] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input3
[ 1.897932] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-4/input0
[ 2.192041] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.200209] ata10.00: ATA-7: SAMSUNG HD400LJ, ZZ100-14, max UDMA7
[ 2.200212] ata10.00: 781422768 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 2.208197] ata10.00: configured for UDMA/133
[ 2.208327] scsi 8:0:0:0: Direct-Access ATA SAMSUNG HD400LJ ZZ10 PQ: 0 ANSI: 5
[ 2.208586] sd 8:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 2.208653] sd 8:0:0:0: [sdb] Write Protect is off
[ 2.208656] sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.208685] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.209013] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 2.267509] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
[ 2.268048] sd 8:0:0:0: [sdb] Attached SCSI disk
[ 2.362199] scsi 10:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6
[ 2.362505] sd 10:0:0:0: Attached scsi generic sg4 type 0
[ 2.365925] sd 10:0:0:0: [sdc] 15138816 512-byte logical blocks: (7.75 GB/7.21 GiB)
[ 2.369048] sd 10:0:0:0: [sdc] Write Protect is off
[ 2.369051] sd 10:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 2.371047] sd 10:0:0:0: [sdc] No Caching mode page found
[ 2.371050] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 2.381049] sd 10:0:0:0: [sdc] No Caching mode page found
[ 2.381055] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 2.383691] sdc: sdc1
[ 2.392116] sd 10:0:0:0: [sdc] No Caching mode page found
[ 2.392124] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 2.392129] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[ 2.528034] ata6: SATA link down (SStatus 0 SControl 310)
[ 2.679138] random: nonblocking pool is initialized
[ 2.848034] ata7: SATA link down (SStatus 0 SControl 310)
[ 2.860957] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 3.168037] ata8: SATA link down (SStatus 0 SControl 310)
[ 12.698200] Adding 4272124k swap on /dev/sda8. Priority:-1 extents:1 across:4272124k FS
[ 13.005334] systemd-udevd[283]: starting version 204
[ 13.218786] lp: driver loaded but no devices found
[ 13.261480] ppdev: user-space parallel port driver
[ 13.268192] parport_pc 00:08: reported by Plug and Play ACPI
[ 13.268256] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 13.364328] lp0: using parport0 (interrupt-driven).
[ 13.455737] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 905kHz
[ 13.485003] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
[ 13.485055] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
[ 13.784848] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.822464] MCE: In-kernel MCE decoding enabled.
[ 13.855391] EDAC MC: Ver: 3.0.0
[ 13.880863] AMD64 EDAC driver v3.4.0
[ 13.880916] EDAC amd64: DRAM ECC disabled.
[ 13.880921] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 13.880921] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 13.880921] (Note that use of the override may cause unknown side effects.)
[ 13.941326] [drm] Initialized drm 1.1.0 20060810
[ 14.127583] type=1400 audit(1504716506.706:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=374 comm="apparmor_parser"
[ 14.127596] type=1400 audit(1504716506.706:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=374 comm="apparmor_parser"
[ 14.127602] type=1400 audit(1504716506.706:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=374 comm="apparmor_parser"
[ 14.130557] type=1400 audit(1504716506.710:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=373 comm="apparmor_parser"
[ 14.130572] type=1400 audit(1504716506.710:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=373 comm="apparmor_parser"
[ 14.130578] type=1400 audit(1504716506.710:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=373 comm="apparmor_parser"
[ 14.175387] wmi: Mapper loaded
[ 14.312902] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 14.330272] checking generic (d1000000 500000) vs hw (c0000000 10000000)
[ 14.330278] checking generic (d1000000 500000) vs hw (d0000000 2000000)
[ 14.330280] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 14.330325] Console: switching to colour dummy device 80x25
[ 14.332435] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 14.334250] [drm] hdmi device not found 1 0 1
[ 14.334339] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x096000a1
[ 14.334342] nouveau [ DEVICE][0000:01:00.0] Chipset: G96 (NV96)
[ 14.334344] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 14.334998] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 14.384774] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 14.384776] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 14.384994] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 14.384998] nouveau [ VBIOS][0000:01:00.0] version 62.94.34.00.00
[ 14.435595] nouveau 0000:01:00.0: irq 44 for MSI/MSI-X
[ 14.435620] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 14.435731] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 14.435734] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 14.435736] nouveau [ PFB][0000:01:00.0] ZCOMP: 2048 tags
[ 14.602253] skge 0000:05:0c.0 eth0: enabling interface
[ 14.605613] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.692333] intel8x0_measure_ac97_clock: measured 52630 usecs (2584 samples)
[ 14.692335] intel8x0: clocking to 46927
[ 14.721716] nouveau [ PTHERM][0000:01:00.0] FAN control: PWM
[ 14.721736] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 14.721776] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 14.721805] nouveau [ CLK][0000:01:00.0] 0f: core 650 MHz shader 1625 MHz memory 500 MHz
[ 14.721846] nouveau [ CLK][0000:01:00.0] --: core 400 MHz shader 800 MHz memory 504 MHz
[ 14.739902] [TTM] Zone kernel: Available graphics memory: 1024912 kiB
[ 14.739908] [TTM] Initializing pool allocator
[ 14.739915] [TTM] Initializing DMA pool allocator
[ 14.739936] nouveau [ DRM] VRAM: 512 MiB
[ 14.739938] nouveau [ DRM] GART: 1048576 MiB
[ 14.739945] nouveau [ DRM] TMDS table version 2.0
[ 14.739948] nouveau [ DRM] DCB version 4.0
[ 14.739952] nouveau [ DRM] DCB outp 00: 02000300 00000028
[ 14.739955] nouveau [ DRM] DCB outp 01: 01000302 00020030
[ 14.739957] nouveau [ DRM] DCB outp 02: 04011310 00000028
[ 14.739960] nouveau [ DRM] DCB outp 03: 02011312 00020030
[ 14.739962] nouveau [ DRM] DCB outp 04: 010223f1 00c0c080
[ 14.739965] nouveau [ DRM] DCB conn 00: 00001030
[ 14.739968] nouveau [ DRM] DCB conn 01: 00002130
[ 14.739970] nouveau [ DRM] DCB conn 02: 00000210
[ 14.739972] nouveau [ DRM] DCB conn 03: 00000211
[ 14.739974] nouveau [ DRM] DCB conn 04: 00000213
[ 14.900777] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 14.967590] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 14.967592] nouveau W[ DRM] TV-1 has no encoders, removing
[ 14.967871] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.967872] [drm] No driver support for vblank timestamp query.
[ 15.245149] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 15.329628] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 15.431985] nouveau [ DRM] allocated 1280x1024 fb: 0x70000, bo ffff88007b857000
[ 15.434423] fbcon: nouveaufb (fb0) is primary device
[ 15.548616] Console: switching to colour frame buffer device 160x64
[ 15.549604] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 15.549608] nouveau 0000:01:00.0: registered panic notifier
[ 15.549617] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[ 17.719695] type=1400 audit(1504716510.298:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=652 comm="apparmor_parser"
[ 17.719709] type=1400 audit(1504716510.298:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=652 comm="apparmor_parser"
[ 17.942822] Bluetooth: Core ver 2.17
[ 17.943350] NET: Registered protocol family 31
[ 17.943354] Bluetooth: HCI device and connection manager initialized
[ 17.944172] Bluetooth: HCI socket layer initialized
[ 17.944190] Bluetooth: L2CAP socket layer initialized
[ 17.944201] Bluetooth: SCO socket layer initialized
[ 17.960675] Bluetooth: RFCOMM TTY layer initialized
[ 17.960698] Bluetooth: RFCOMM socket layer initialized
[ 17.960713] Bluetooth: RFCOMM ver 1.11
[ 18.135415] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.135422] Bluetooth: BNEP filters: protocol multicast
[ 18.135439] Bluetooth: BNEP socket layer initialized
[ 18.315484] init: cups main process (653) killed by HUP signal
[ 18.315505] init: cups main process ended, respawning
[ 19.496705] init: samba-ad-dc main process (753) terminated with status 1
[ 20.800113] skge: eth0: autonegotiation failed (speed/duplex)
[ 30.028380] skge: eth0: autonegotiation failed (speed/duplex)
[ 33.058646] skge 0000:05:0c.0 eth0: Link is down
[ 36.152619] skge: eth0: autonegotiation failed (speed/duplex)
[ 39.182551] skge 0000:05:0c.0 eth0: Link is down
[ 42.276970] skge: eth0: autonegotiation failed (speed/duplex)
[ 47.883022] type=1400 audit(1504716540.462:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=826 comm="apparmor_parser"
[ 47.883039] type=1400 audit(1504716540.462:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=826 comm="apparmor_parser"
[ 49.007955] type=1400 audit(1504716541.586:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=849 comm="apparmor_parser"
[ 51.505468] skge 0000:05:0c.0 eth0: Link is up at 100 Mbps, half duplex, flow control none
[ 51.505493] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 62.652463] init: failsafe main process (613) killed by TERM signal
[ 62.875102] init: network-manager main process (1028) terminated with status 127
[ 62.875124] init: network-manager main process ended, respawning
[ 63.135057] type=1400 audit(1504716555.714:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1093 comm="apparmor_parser"
[ 63.135072] type=1400 audit(1504716555.714:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=1093 comm="apparmor_parser"
[ 63.138712] type=1400 audit(1504716555.718:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1094 comm="apparmor_parser"
[ 63.138727] type=1400 audit(1504716555.718:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1094 comm="apparmor_parser"
[ 63.138734] type=1400 audit(1504716555.718:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1094 comm="apparmor_parser"
[ 63.157909] type=1400 audit(1504716555.738:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=1095 comm="apparmor_parser"
[ 63.157926] type=1400 audit(1504716555.738:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1095 comm="apparmor_parser"
[ 63.157932] type=1400 audit(1504716555.738:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=1095 comm="apparmor_parser"
[ 63.157938] type=1400 audit(1504716555.738:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1095 comm="apparmor_parser"
[ 63.157944] type=1400 audit(1504716555.738:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=1095 comm="apparmor_parser"Merci
Hors ligne
#68 Le 06/09/2017, à 21:59
- philoeil
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Bonjour je répond à ma question subsidiaire #32 :
Copier coller du texte d'un editeur vers la console
lu sur le net :
" tu peux par exemple commencer par regarder quelle commande tu veux exécuter :
cat -n tonFichierTexteAvecLesCommandes
Puis quand tu as choisi la ligne que tu désires exécuter :
sed -ne 'Kp' tonFichierTexteAvecLesCommandes
où K est le numéro de la ligne à exécuter..
Phil :
activer la souris dans la console
surligner la ligne a executée lancé par sed -ne '2p' fichiertxtcommandes.txt =>copie
click sur roulette => colle
Je n'ai pas trouvé comment avec sed executer directement la ligne extraite du fichier texte
Merci à tous
Hors ligne
#69 Le 07/09/2017, à 04:09
- moko138
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Pourquoi as-tu démarré en root ?
Recommence en démarrant normalement et en te loguant en tant que phil.
tu trouveras automatiquement ta clef en
/media/phil/MYUSBCAST
(Ne la monte pas à la main en /media/Dusb)).
Du coup, le début de la commande sera modifié :
cd /media/phil/MYUSBCAST; echo 'whoami' > titi67.txt; whoami >> titi67.txt; echo >> titi67.txt; echo 'hosts' >> titi67.txt; cat /etc/hosts |head -2 >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'dpkg -l|grep usb' >> titi67.txt; dpkg -l|grep usb >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'lsusb' >> titi67.txt; lsusb >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'ls -la --group-directories-first /media' >> titi67.txt; ls -la --group-directories-first /media >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'ls -la --group-directories-first /media/*' >> titi67.txt; ls -la --group-directories-first /media/* >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'ls -la --group-directories-first /media/*/*' >> titi67.txt; ls -la --group-directories-first /media/*/* >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'fstab' >> titi67.txt; ls -l /etc/fstab >> titi67.txt; echo '==========' >> titi67.txt; cat /etc/fstab >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'sudo cat /var/log/dmesg' >> titi67.txt; sudo cat /var/log/dmesg >> titi67.txt; cd;- -
On dirait que, au lieu de la coller, tu as retapé la commande avec des fautes de frappe (apparition de chiffres :
whoami
root
1==========
hosts
2==========
dpkg -l|grep usb)
et avec omission de
cat /etc/hosts |head -2- -
/!\ Le contenu de /media aurait dû être presque vide (hors Dusb), mais on voit qu'il est très bidouillé. Donc on y reviendra, mais là je vais être indisponible quelques heures.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#70 Le 07/09/2017, à 10:36
- philoeil
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Bonjour,
Pourquoi as-tu démarré en root ?
parce que j'avais des messages d'erreur "impossible d'ouvrir le répertoire /media/..."
On dirait que, au lieu de la coller, tu as retapé la commande avec des fautes de frappe (apparition de chiffres :
C'est vrai hier j'ai galéré à comprendre comment copier coller un texte aussi long avec la commande sed hier je ne maitrisais pas bien j'avais donc coupé le texte en 5 bouts et pour m'y retrouver j'avais seulement modifié un = par un chiffre...
Aujourd'hui je pense mieux maitriser et je sais même comment te renvoyer les message d'erreur qui s'affichent à l'écran avec copier coller dans nano (par la souris).
le résultat de la commande tel que tu me la passé sauf le lieu de la clef USB car elle ne se monte pas toute seule :
whoami
phil
hosts
127.0.0.1 localhost
127.0.1.1 PHILNOIR
==========
dpkg -l|grep usb
ii libgusb2:amd64 0.1.6-5 amd64 GLib wrapper around libusb1
ii libusb-0.1-4:amd64 2:0.1.12-23.3ubuntu1 amd64 userspace USB programming library
ii libusb-1.0-0:amd64 2:1.0.17-1ubuntu2 amd64 userspace USB programming library
ii libusbmuxd2 1.0.8-2ubuntu1 amd64 USB multiplexor daemon for iPhone and iPod Touch devices - library
ii usb-modeswitch 2.1.1+repack0-1ubuntu1 amd64 mode switching tool for controlling "flip flop" USB devices
ii usb-modeswitch-data 20140327-1 all mode switching data for usb-modeswitch
ii usbmuxd 1.0.8-2ubuntu1 amd64 USB multiplexor daemon for iPhone and iPod Touch devices
ii usbutils 1:007-2ubuntu1 amd64 Linux USB utilities
ii xserver-xorg-video-sisusb 1:0.9.6-2build1 amd64 X.Org X server -- SiS USB display driver
==========
lsusb
Bus 001 Device 003: ID 13fe:4200 Kingston Technology Company Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
==========
ls -la --group-directories-first /media
total 40
drwxr-xr-x 8 root root 4096 juil. 30 22:46 .
drwxr-xr-x 25 root root 4096 août 30 17:47 ..
drwxr-xr-x 7 phil root 8192 janv. 1 1970 Dusb
drwxrwxr-x 2 root root 4096 avril 6 2015 floppy0
drwxr-xr-x 2 root root 4096 oct. 17 2015 grub-customizer_recovery_root_mountpoint
drwxr-x---+ 2 root root 4096 déc. 10 2016 juliette
drwxr-x---+ 5 root root 4096 juil. 11 22:15 nad
drwxr-x---+ 5 root root 4096 juil. 9 18:19 phil
-rw-r--r-- 1 root root 72 mai 30 20:31 .created_by_python-fstab
lrwxrwxrwx 1 root root 7 avril 6 2015 floppy -> floppy0
==========
ls -la --group-directories-first /media/*
lrwxrwxrwx 1 root root 7 avril 6 2015 /media/floppy -> floppy0
/media/Dusb:
total 1008
drwxr-xr-x 7 phil root 8192 janv. 1 1970 .
drwxr-xr-x 8 root root 4096 juil. 30 22:46 ..
drwxr-xr-x 2 phil root 4096 nov. 2 2016 Black liste
drwxr-xr-x 2 phil root 4096 juil. 31 13:56 CAF
drwxr-xr-x 13 phil root 4096 janv. 9 2017 SyncPodcast
drwxr-xr-x 2 phil root 4096 mars 28 16:14 System Volume Information
drwxr-xr-x 4 phil root 4096 nov. 2 2016 .Trash-1000
-rwxr-xr-x 1 phil root 110 août 28 20:36 280817_cmd2.txt
-rwxr-xr-x 1 phil root 323 août 28 20:35 280817_cmd.txt
-rwxr-xr-x 1 phil root 87 sept. 6 22:23 cm1.txt
-rwxr-xr-x 1 phil root 13 sept. 6 21:47 cm22.txt
-rwxr-xr-x 1 phil root 1374 sept. 6 22:31 cm_60917.txt
-rwxr-xr-x 1 phil root 555 août 16 07:37 cmd160817.txt
-rwxr-xr-x 1 phil root 1359 sept. 6 19:09 cmd60917.txt
-rwxr-xr-x 1 phil root 1361 sept. 7 11:13 cmd709.txt
-rwxr-xr-x 1 phil root 791 juil. 30 23:35 cmddf.txt
-rwxr-xr-x 1 phil root 0 août 18 20:49 err1908.log
-rwxr-xr-x 1 phil root 0 août 18 20:05 err1908.txt
-rwxr-xr-x 1 phil root 121265 août 28 21:01 erreur_titi23.txt
-rwxr-xr-x 1 phil root 88 sept. 6 21:12 Ess1.txt
-rwxr-xr-x 1 phil root 3627 août 30 17:55 essai.txt
-rwxr-xr-x 1 phil root 0 août 18 20:48 ex5
-rwxr-xr-x 1 phil root 60 août 18 20:48 ex5err.txt
-rwxr-xr-x 1 phil root 919 août 27 09:17 fstab
-rwxr-xr-x 1 phil root 42214 août 15 21:29 histo2.txt
-rwxr-xr-x 1 phil root 25258 août 15 21:24 historictiti.txt
-rwxr-xr-x 1 phil root 121265 août 28 20:59 old2_titi23.txt
-rwxr-xr-x 1 phil root 121265 août 28 20:55 oldtiti23.txt
-rwxr-xr-x 1 phil root 2516 août 15 21:00 repo21_1.txt
-rwxr-xr-x 1 phil root 4582 août 8 22:27 reponses080817.txt
-rwxr-xr-x 1 phil root 84 août 15 20:59 repos21_1.txt
-rwxr-xr-x 1 phil root 551 août 17 21:42 ret1_1708.txt
-rwxr-xr-x 1 phil root 1291 août 18 07:18 ret1_1908.txt
-rwxr-xr-x 1 phil root 54 août 27 10:33 ret1_2708.txt
-rwxr-xr-x 1 phil root 0 août 16 21:15 ret160817.txt
-rwxr-xr-x 1 phil root 1080 août 17 07:09 ret170817.txt
-rwxr-xr-x 1 phil root 607 août 17 21:48 ret2_1708.txt
-rwxr-xr-x 1 phil root 724 août 18 18:00 ret2_1908.txt
-rwxr-xr-x 1 phil root 154 août 26 17:45 ret2_260817.txt
-rwxr-xr-x 1 phil root 509 août 27 10:36 ret2_2708.txt
-rwxr-xr-x 1 phil root 0 août 30 17:46 ret2_300817.txt
-rwxr-xr-x 1 phil root 1685 août 30 17:42 ret300817.txt
-rwxr-xr-x 1 phil root 402 août 17 21:52 ret3_1708_.txt
-rwxr-xr-x 1 phil root 1448 août 18 18:02 ret3_1908.txt
-rwxr-xr-x 1 phil root 5465 août 26 21:51 ret3_2608.txt
-rwxr-xr-x 1 phil root 1448 août 18 20:50 Ret4_1908.txt
-rwxr-xr-x 1 phil root 135218 août 26 21:53 ret4_2608.txt
-rwxr-xr-x 1 phil root 54 août 26 19:20 retFstab2608.txt
-rwxr-xr-x 1 phil root 79 août 9 21:01 retour090817.txt
-rwxr-xr-x 1 phil root 1568 août 16 07:43 retour160817.txt
-rwxr-xr-x 1 phil root 15446 août 8 22:19 retourTermLog.txt
-rwxr-xr-x 1 phil root 268 août 1 23:16 soucelist.txt
-rwxr-xr-x 1 phil root 2483 août 1 23:17 source2.txt
-rwxr-xr-x 1 phil root 1841 sept. 6 21:17 titi1_67.txt
-rwxr-xr-x 1 phil root 121265 août 28 21:27 titi23.txt
-rwxr-xr-x 1 phil root 3203 août 15 22:21 titi2.txt
-rwxr-xr-x 1 phil root 5165 août 15 22:40 titi3.txt
-rwxr-xr-x 1 phil root 15289 août 28 21:04 titi45.txt
-rwxr-xr-x 1 phil root 2517 sept. 7 11:14 titi67.txt
-rwxr-xr-x 1 phil root 1841 sept. 6 21:21 titiOLD1_67.txt
-rwxr-xr-x 1 phil root 71331 sept. 6 19:34 titiOld2_67.txt
-rwxr-xr-x 1 phil root 1841 sept. 6 19:57 titiold3_67.txt
-rwxr-xr-x 1 phil root 1840 sept. 6 19:17 titiOld67.txt
-rwxr-xr-x 1 phil root 903 août 15 21:22 titi.txt
-rwxr-xr-x 1 phil root 110 août 1 23:15 uname1.txt
/media/floppy0:
total 8
drwxrwxr-x 2 root root 4096 avril 6 2015 .
drwxr-xr-x 8 root root 4096 juil. 30 22:46 ..
/media/grub-customizer_recovery_root_mountpoint:
total 8
drwxr-xr-x 2 root root 4096 oct. 17 2015 .
drwxr-xr-x 8 root root 4096 juil. 30 22:46 ..
/media/phil:
total 20
drwxr-x---+ 5 root root 4096 juil. 9 18:19 .
drwxr-xr-x 8 root root 4096 juil. 30 22:46 ..
drwx------ 2 root root 4096 mai 14 21:27 1 windows(C)
drwxr-xr-x 2 root root 4096 mai 30 20:20 2_VideoActif(G)
drwx------ 2 root root 4096 mai 14 21:27 54A6EB745CA4B4BC
==========
ls -la --group-directories-first /media/*/*
-rwxr-xr-x 1 phil root 110 août 28 20:36 /media/Dusb/280817_cmd2.txt
-rwxr-xr-x 1 phil root 323 août 28 20:35 /media/Dusb/280817_cmd.txt
-rwxr-xr-x 1 phil root 87 sept. 6 22:23 /media/Dusb/cm1.txt
-rwxr-xr-x 1 phil root 13 sept. 6 21:47 /media/Dusb/cm22.txt
-rwxr-xr-x 1 phil root 1374 sept. 6 22:31 /media/Dusb/cm_60917.txt
-rwxr-xr-x 1 phil root 555 août 16 07:37 /media/Dusb/cmd160817.txt
-rwxr-xr-x 1 phil root 1359 sept. 6 19:09 /media/Dusb/cmd60917.txt
-rwxr-xr-x 1 phil root 1361 sept. 7 11:13 /media/Dusb/cmd709.txt
-rwxr-xr-x 1 phil root 791 juil. 30 23:35 /media/Dusb/cmddf.txt
-rwxr-xr-x 1 phil root 0 août 18 20:49 /media/Dusb/err1908.log
-rwxr-xr-x 1 phil root 0 août 18 20:05 /media/Dusb/err1908.txt
-rwxr-xr-x 1 phil root 121265 août 28 21:01 /media/Dusb/erreur_titi23.txt
-rwxr-xr-x 1 phil root 88 sept. 6 21:12 /media/Dusb/Ess1.txt
-rwxr-xr-x 1 phil root 3627 août 30 17:55 /media/Dusb/essai.txt
-rwxr-xr-x 1 phil root 0 août 18 20:48 /media/Dusb/ex5
-rwxr-xr-x 1 phil root 60 août 18 20:48 /media/Dusb/ex5err.txt
-rwxr-xr-x 1 phil root 919 août 27 09:17 /media/Dusb/fstab
-rwxr-xr-x 1 phil root 42214 août 15 21:29 /media/Dusb/histo2.txt
-rwxr-xr-x 1 phil root 25258 août 15 21:24 /media/Dusb/historictiti.txt
-rwxr-xr-x 1 phil root 121265 août 28 20:59 /media/Dusb/old2_titi23.txt
-rwxr-xr-x 1 phil root 121265 août 28 20:55 /media/Dusb/oldtiti23.txt
-rwxr-xr-x 1 phil root 2516 août 15 21:00 /media/Dusb/repo21_1.txt
-rwxr-xr-x 1 phil root 4582 août 8 22:27 /media/Dusb/reponses080817.txt
-rwxr-xr-x 1 phil root 84 août 15 20:59 /media/Dusb/repos21_1.txt
-rwxr-xr-x 1 phil root 551 août 17 21:42 /media/Dusb/ret1_1708.txt
-rwxr-xr-x 1 phil root 1291 août 18 07:18 /media/Dusb/ret1_1908.txt
-rwxr-xr-x 1 phil root 54 août 27 10:33 /media/Dusb/ret1_2708.txt
-rwxr-xr-x 1 phil root 0 août 16 21:15 /media/Dusb/ret160817.txt
-rwxr-xr-x 1 phil root 1080 août 17 07:09 /media/Dusb/ret170817.txt
-rwxr-xr-x 1 phil root 607 août 17 21:48 /media/Dusb/ret2_1708.txt
-rwxr-xr-x 1 phil root 724 août 18 18:00 /media/Dusb/ret2_1908.txt
-rwxr-xr-x 1 phil root 154 août 26 17:45 /media/Dusb/ret2_260817.txt
-rwxr-xr-x 1 phil root 509 août 27 10:36 /media/Dusb/ret2_2708.txt
-rwxr-xr-x 1 phil root 0 août 30 17:46 /media/Dusb/ret2_300817.txt
-rwxr-xr-x 1 phil root 1685 août 30 17:42 /media/Dusb/ret300817.txt
-rwxr-xr-x 1 phil root 402 août 17 21:52 /media/Dusb/ret3_1708_.txt
-rwxr-xr-x 1 phil root 1448 août 18 18:02 /media/Dusb/ret3_1908.txt
-rwxr-xr-x 1 phil root 5465 août 26 21:51 /media/Dusb/ret3_2608.txt
-rwxr-xr-x 1 phil root 1448 août 18 20:50 /media/Dusb/Ret4_1908.txt
-rwxr-xr-x 1 phil root 135218 août 26 21:53 /media/Dusb/ret4_2608.txt
-rwxr-xr-x 1 phil root 54 août 26 19:20 /media/Dusb/retFstab2608.txt
-rwxr-xr-x 1 phil root 79 août 9 21:01 /media/Dusb/retour090817.txt
-rwxr-xr-x 1 phil root 1568 août 16 07:43 /media/Dusb/retour160817.txt
-rwxr-xr-x 1 phil root 15446 août 8 22:19 /media/Dusb/retourTermLog.txt
-rwxr-xr-x 1 phil root 268 août 1 23:16 /media/Dusb/soucelist.txt
-rwxr-xr-x 1 phil root 2483 août 1 23:17 /media/Dusb/source2.txt
-rwxr-xr-x 1 phil root 1841 sept. 6 21:17 /media/Dusb/titi1_67.txt
-rwxr-xr-x 1 phil root 121265 août 28 21:27 /media/Dusb/titi23.txt
-rwxr-xr-x 1 phil root 3203 août 15 22:21 /media/Dusb/titi2.txt
-rwxr-xr-x 1 phil root 5165 août 15 22:40 /media/Dusb/titi3.txt
-rwxr-xr-x 1 phil root 15289 août 28 21:04 /media/Dusb/titi45.txt
-rwxr-xr-x 1 phil root 7100 sept. 7 11:14 /media/Dusb/titi67.txt
-rwxr-xr-x 1 phil root 1841 sept. 6 21:21 /media/Dusb/titiOLD1_67.txt
-rwxr-xr-x 1 phil root 71331 sept. 6 19:34 /media/Dusb/titiOld2_67.txt
-rwxr-xr-x 1 phil root 1841 sept. 6 19:57 /media/Dusb/titiold3_67.txt
-rwxr-xr-x 1 phil root 1840 sept. 6 19:17 /media/Dusb/titiOld67.txt
-rwxr-xr-x 1 phil root 903 août 15 21:22 /media/Dusb/titi.txt
-rwxr-xr-x 1 phil root 110 août 1 23:15 /media/Dusb/uname1.txt
/media/Dusb/Black liste:
total 1188576
drwxr-xr-x 2 phil root 4096 nov. 2 2016 .
drwxr-xr-x 7 phil root 8192 janv. 1 1970 ..
-rwxr-xr-x 1 phil root 42809472 oct. 27 2012 12685-17.10.2012-ITEMA_20411260-0.mp3
-rwxr-xr-x 1 phil root 44277995 sept. 23 2012 12685-18.09.2012-ITEMA_20401628-0.mp3
-rwxr-xr-x 1 phil root 43802752 oct. 27 2012 12685-18.10.2012-ITEMA_20411602-0.mp3
-rwxr-xr-x 1 phil root 42494080 déc. 23 2012 12685-18.12.2012-ITEMA_20431124-0.mp3
-rwxr-xr-x 1 phil root 42398018 sept. 23 2012 12685-19.09.2012-ITEMA_20401982-0.mp3
-rwxr-xr-x 1 phil root 43360384 oct. 27 2012 12685-19.10.2012-ITEMA_20411944-0.mp3
-rwxr-xr-x 1 phil root 43008128 déc. 23 2012 12685-19.12.2012-ITEMA_20431499-0.mp3
-rwxr-xr-x 1 phil root 43384960 nov. 25 2012 12685-20.11.2012-ITEMA_20422060-0.mp3
-rwxr-xr-x 1 phil root 43718784 nov. 25 2012 12685-21.11.2012-ITEMA_20422416-0.mp3
-rwxr-xr-x 1 phil root 43313280 déc. 23 2012 12685-21.12.2012-ITEMA_20432233-0.mp3
-rwxr-xr-x 1 phil root 44490880 nov. 25 2012 12685-22.11.2012-ITEMA_20422759-0.mp3
-rwxr-xr-x 1 phil root 43577472 oct. 27 2012 12685-23.10.2012-ITEMA_20413078-0.mp3
-rwxr-xr-x 1 phil root 43444352 nov. 25 2012 12685-23.11.2012-ITEMA_20423110-0.mp3
-rwxr-xr-x 1 phil root 43634816 oct. 27 2012 12685-24.10.2012-ITEMA_20413481-0.mp3
-rwxr-xr-x 1 phil root 43292800 oct. 1 2012 12685-25.09.2012-ITEMA_20403793-0.mp3
-rwxr-xr-x 1 phil root 45033600 oct. 27 2012 12685-25.10.2012-ITEMA_20413827-0.mp3
-rwxr-xr-x 1 phil root 43790464 oct. 1 2012 12685-26.09.2012-ITEMA_20404136-0.mp3
-rwxr-xr-x 1 phil root 43837568 oct. 27 2012 12685-26.10.2012-ITEMA_20414169-0.mp3
-rwxr-xr-x 1 phil root 43612288 oct. 1 2012 12685-27.09.2012-ITEMA_20404473-0.mp3
-rwxr-xr-x 1 phil root 43135104 déc. 1 2012 12685-27.11.2012-ITEMA_20424259-0.mp3
-rwxr-xr-x 1 phil root 43139200 oct. 1 2012 12685-28.09.2012-ITEMA_20405367-0.mp3
-rwxr-xr-x 1 phil root 43479168 déc. 1 2012 12685-28.11.2012-ITEMA_20424611-0.mp3
-rwxr-xr-x 1 phil root 43595904 déc. 1 2012 12685-29.11.2012-ITEMA_20424990-0.mp3
-rwxr-xr-x 1 phil root 42727552 nov. 2 2012 12685-30.10.2012-ITEMA_20415549-0.mp3
-rwxr-xr-x 1 phil root 43700352 déc. 1 2012 12685-30.11.2012-ITEMA_20425404-0.mp3
-rwxr-xr-x 1 phil root 42463360 nov. 2 2012 12685-31.10.2012-ITEMA_20415892-0.mp3
-rwxr-xr-x 1 phil root 43313280 déc. 23 2012 273073201426-6a828346f31e455fbb104b29ba061bdc.mp3
-rwxr-xr-x 1 phil root 44078939 sept. 23 2012 273073201426.mp3
-rwxr-xr-x 1 phil root 60448 nov. 16 2011 art.jpg
-rwxr-xr-x 1 phil root 24917 déc. 23 2012 folder.jpg
/media/Dusb/CAF:
total 1332
drwxr-xr-x 2 phil root 4096 juil. 31 13:56 .
drwxr-xr-x 7 phil root 8192 janv. 1 1970 ..
-rwxr-xr-x 1 phil root 1348555 juil. 31 13:50 CCF_000021.pdf
/media/Dusb/SyncPodcast:
total 68
drwxr-xr-x 13 phil root 4096 janv. 9 2017 .
drwxr-xr-x 7 phil root 8192 janv. 1 1970 ..
drwxr-xr-x 2 phil root 8192 mai 24 20:53 autantempHistoire
drwxr-xr-x 2 phil root 4096 janv. 9 2017 Carrefour de Lodeon
drwxr-xr-x 2 phil root 4096 mai 24 20:46 Continent Musique
drwxr-xr-x 2 phil root 4096 mai 24 20:46 cont sciences
drwxr-xr-x 2 phil root 4096 mai 24 20:51 ConvScientifique
drwxr-xr-x 2 phil root 12288 mai 24 20:52 Philosophie
drwxr-xr-x 2 phil root 4096 nov. 2 2016 Playlists
drwxr-xr-x 2 phil root 4096 nov. 2 2016 Radioscopie
drwxr-xr-x 2 phil root 4096 nov. 2 2016 Repliques
drwxr-xr-x 2 phil root 4096 nov. 2 2016 Savanturiers
drwxr-xr-x 2 phil root 4096 janv. 9 2017 Very Good Trip
/media/Dusb/System Volume Information:
total 16
drwxr-xr-x 2 phil root 4096 mars 28 16:14 .
drwxr-xr-x 7 phil root 8192 janv. 1 1970 ..
-rwxr-xr-x 1 phil root 76 mars 28 16:14 IndexerVolumeGuid
/media/phil/2_VideoActif(G):
total 8
drwxr-xr-x 2 root root 4096 mai 30 20:20 .
drwxr-x---+ 5 root root 4096 juil. 9 18:19 ..
==========
fstab
==========
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
#Entry for /dev/sdb7 :
UUID=98bb42d7-6aae-43c9-8c15-07429294faad / ext4 errors=remount-ro 0 1
#
#Entry for /dev/sdb5 :
UUID=c7465b27-cfec-4f73-b171-dfc94cca34f2 /home ext4 defaults 0 2
#
# swap sur sdb8
UUID=0e07b0d6-cbbf-4dc5-8f86-4f560f1bb818 none swap sw 0 0
#
# Entry for /dev/sdc5 :
UUID=79EC7D3D53F9F6C2 /mnt/79EC7D3D53F9F6C2 ntfs-3g defaults,locale=fr_FR.UTF-8,nofail,uid=1000,gid=1000,windows_names 0 0
#
# Entry for /dev/sdc1 :
#UUID=48F4F527F4F517C0 /media/phil/1_windows_C ntfs-3g defaults,locale=fr_FR.UTF-8,nofail,uid=1000,gid=1000,windows_names 0 0
#
# Entry for /dev/sdb1 (antérieurement montée sur /media/nad) :
#UUID=7E14CBFC14CBB605 /media/phil/2_Prog_files_D ntfs-3g defaults,locale=fr_FR.UTF-8,nofail,uid=1000,gid=1000,windows_names 0 0
#
==========
sudo cat /var/log/dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-128-generic (buildd@lgw01-39) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #177-Ubuntu SMP Tue Aug 8 11:40:23 UTC 2017 (Ubuntu 3.13.0-128.177-generic 3.13.11-ckt39)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-128-generic root=UUID=98bb42d7-6aae-43c9-8c15-07429294faad ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/A8N-SLI Premium, BIOS ASUS A8N-SLI Premium ACPI BIOS Revision 1303 08/10/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f5880-0x000f588f] mapped at [ffff8800000f5880]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[ 0.000000] [mem 0x7c000000-0x7fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7ffeffff]
[ 0.000000] [mem 0x7fe00000-0x7ffeffff] page 4k
[ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35b26000-0x36d8afff]
[ 0.000000] ACPI: RSDP 00000000000f7c60 000014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 000000007fff3040 000030 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 000000007fff30c0 000074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 000000007fff3180 006A16 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000000007fff0000 000040
[ 0.000000] ACPI: MCFG 000000007fff9cc0 00003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 000000007fff9c00 00007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffeffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ffeffff]
[ 0.000000] NODE_DATA [mem 0x7ffeb000-0x7ffeffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffeffff]
[ 0.000000] On node 0 totalpages: 524174
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8128 pages used for memmap
[ 0.000000] DMA32 zone: 520176 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s81536 r8192 d20864 u1048576
[ 0.000000] pcpu-alloc: s81536 r8192 d20864 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515961
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-128-generic root=UUID=98bb42d7-6aae-43c9-8c15-07429294faad ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 19c000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 2028228K/2096696K available (7433K kernel code, 1147K rwdata, 3424K rodata, 1340K init, 1448K bss, 68468K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2010.358 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.71 BogoMIPS (lpj=8041432)
[ 0.004013] pid_max: default: 32768 minimum: 301
[ 0.004075] Security Framework initialized
[ 0.004119] AppArmor: AppArmor initialized
[ 0.004120] Yama: becoming mindful.
[ 0.004483] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009658] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.011172] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.011180] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.011692] Initializing cgroup subsys memory
[ 0.011712] Initializing cgroup subsys devices
[ 0.011716] Initializing cgroup subsys freezer
[ 0.011720] Initializing cgroup subsys blkio
[ 0.011722] Initializing cgroup subsys perf_event
[ 0.011726] Initializing cgroup subsys hugetlb
[ 0.011760] tseg: 0000000000
[ 0.011772] mce: CPU supports 5 MCE banks
[ 0.011791] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.011791] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.011791] tlb_flushall_shift: 4
[ 0.024019] ACPI: Core revision 20131115
[ 0.028410] ACPI: All ACPI Tables successfully acquired
[ 0.029738] ftrace: allocating 28676 entries in 113 pages
[ 0.044280] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.052000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.052000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.052000] ..... (found apic 0 pin 0) ...
[ 0.060000] ....... failed.
[ 0.060000] ...trying to set up timer as Virtual Wire IRQ...
[ 0.060000] ..... failed.
[ 0.060000] ...trying to set up timer as ExtINT IRQ...
[ 0.102434] ..... works.
[ 0.102435] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 2f, stepping: 00)
[ 0.104000] Performance Events: AMD PMU driver.
[ 0.104000] ... version: 0
[ 0.104000] ... bit width: 48
[ 0.104000] ... generic registers: 4
[ 0.104000] ... value mask: 0000ffffffffffff
[ 0.104000] ... max period: 00007fffffffffff
[ 0.104000] ... fixed-purpose events: 0
[ 0.104000] ... event mask: 000000000000000f
[ 0.104000] x86: Booted up 1 node, 1 CPUs
[ 0.104000] smpboot: Total of 1 processors activated (4020.71 BogoMIPS)
[ 0.104000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.104000] devtmpfs: initialized
[ 0.108175] EVM: security.selinux
[ 0.108177] EVM: security.SMACK64
[ 0.108179] EVM: security.ima
[ 0.108180] EVM: security.capability
[ 0.108253] PM: Registering ACPI NVS region [mem 0x7fff0000-0x7fff2fff] (12288 bytes)
[ 0.109879] pinctrl core: initialized pinctrl subsystem
[ 0.109998] regulator-dummy: no parameters
[ 0.110036] RTC time: 8:26:03, date: 09/07/17
[ 0.110102] NET: Registered protocol family 16
[ 0.110312] cpuidle: using governor ladder
[ 0.110315] cpuidle: using governor menu
[ 0.110322] node 0 link 0: io port [1000, fffff]
[ 0.110325] TOM: 0000000080000000 aka 2048M
[ 0.110329] node 0 link 0: mmio [e0000000, efffffff]
[ 0.110332] node 0 link 0: mmio [feb00000, fec0ffff]
[ 0.110335] node 0 link 0: mmio [a0000, bffff]
[ 0.110337] node 0 link 0: mmio [80000000, fed3ffff]
[ 0.110340] bus: [bus 00-ff] on node 0 link 0
[ 0.110342] bus: 00 [io 0x0000-0xffff]
[ 0.110344] bus: 00 [mem 0x80000000-0xfcffffffff]
[ 0.110346] bus: 00 [mem 0xfeb00000-0xfec0ffff]
[ 0.110348] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.110406] ACPI: bus type PCI registered
[ 0.110409] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.110504] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.110508] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.120937] PCI: Using configuration type 1 for base access
[ 0.122527] bio: create slab <bio-0> at 0
[ 0.122786] ACPI: Added _OSI(Module Device)
[ 0.122789] ACPI: Added _OSI(Processor Device)
[ 0.122791] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.122792] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.129059] ACPI: Interpreter enabled
[ 0.129074] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.129091] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.129093] ACPI: Using IOAPIC for interrupt routing
[ 0.129128] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.129304] ACPI: No dock devices found.
[ 0.138546] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.138559] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.138567] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.138652] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.138655] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.138658] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.138661] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.138664] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.138667] PCI: root bus 00: hardware-probed resources
[ 0.138993] PCI host bridge to bus 0000:00
[ 0.138997] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.139000] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.139003] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff]
[ 0.139006] pci_bus 0000:00: root bus resource [mem 0xfeb00000-0xfec0ffff]
[ 0.139008] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.139023] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[ 0.139230] pci 0000:00:01.0: [10de:0050] type 00 class 0x060100
[ 0.139251] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.139409] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[ 0.139418] pci 0000:00:01.1: reg 0x10: [io 0xe400-0xe41f]
[ 0.139431] pci 0000:00:01.1: reg 0x20: [io 0x4c00-0x4c3f]
[ 0.139436] pci 0000:00:01.1: reg 0x24: [io 0x4c40-0x4c7f]
[ 0.139451] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.139601] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[ 0.139609] pci 0000:00:02.0: reg 0x10: [mem 0xd6004000-0xd6004fff]
[ 0.139637] pci 0000:00:02.0: supports D1 D2
[ 0.139639] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.139744] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.139792] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[ 0.139801] pci 0000:00:02.1: reg 0x10: [mem 0xfeb00000-0xfeb000ff]
[ 0.139834] pci 0000:00:02.1: supports D1 D2
[ 0.139836] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.139953] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.140016] pci 0000:00:04.0: [10de:0059] type 00 class 0x040100
[ 0.140024] pci 0000:00:04.0: reg 0x10: [io 0xdc00-0xdcff]
[ 0.140029] pci 0000:00:04.0: reg 0x14: [io 0xe000-0xe0ff]
[ 0.140035] pci 0000:00:04.0: reg 0x18: [mem 0xd6003000-0xd6003fff]
[ 0.140057] pci 0000:00:04.0: supports D1 D2
[ 0.140199] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[ 0.140216] pci 0000:00:06.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.140370] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[ 0.140378] pci 0000:00:07.0: reg 0x10: [io 0x09f0-0x09f7]
[ 0.140383] pci 0000:00:07.0: reg 0x14: [io 0x0bf0-0x0bf3]
[ 0.140388] pci 0000:00:07.0: reg 0x18: [io 0x0970-0x0977]
[ 0.140393] pci 0000:00:07.0: reg 0x1c: [io 0x0b70-0x0b73]
[ 0.140398] pci 0000:00:07.0: reg 0x20: [io 0xd800-0xd80f]
[ 0.140404] pci 0000:00:07.0: reg 0x24: [mem 0xd6002000-0xd6002fff]
[ 0.140553] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[ 0.140561] pci 0000:00:08.0: reg 0x10: [io 0x09e0-0x09e7]
[ 0.140566] pci 0000:00:08.0: reg 0x14: [io 0x0be0-0x0be3]
[ 0.140572] pci 0000:00:08.0: reg 0x18: [io 0x0960-0x0967]
[ 0.140577] pci 0000:00:08.0: reg 0x1c: [io 0x0b60-0x0b63]
[ 0.140582] pci 0000:00:08.0: reg 0x20: [io 0xc400-0xc40f]
[ 0.140587] pci 0000:00:08.0: reg 0x24: [mem 0xd6001000-0xd6001fff]
[ 0.140735] pci 0000:00:09.0: [10de:005c] type 01 class 0x060401
[ 0.140850] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.140894] pci 0000:00:0a.0: [10de:0057] type 00 class 0x068000
[ 0.140902] pci 0000:00:0a.0: reg 0x10: [mem 0xd6000000-0xd6000fff]
[ 0.140907] pci 0000:00:0a.0: reg 0x14: [io 0xb000-0xb007]
[ 0.140932] pci 0000:00:0a.0: supports D1 D2
[ 0.140935] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.141041] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.141091] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[ 0.141120] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.141229] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.141276] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[ 0.141304] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.141415] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.141471] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[ 0.141499] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.141608] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.141658] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[ 0.141685] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.141793] pci 0000:00:0e.0: System wakeup disabled by ACPI
[ 0.141850] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.141994] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.142133] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.142277] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.142464] pci 0000:05:0a.0: [1095:3114] type 00 class 0x010400
[ 0.142476] pci 0000:05:0a.0: reg 0x10: [io 0x8000-0x8007]
[ 0.142484] pci 0000:05:0a.0: reg 0x14: [io 0x8400-0x8403]
[ 0.142491] pci 0000:05:0a.0: reg 0x18: [io 0x8800-0x8807]
[ 0.142498] pci 0000:05:0a.0: reg 0x1c: [io 0x8c00-0x8c03]
[ 0.142505] pci 0000:05:0a.0: reg 0x20: [io 0x9000-0x900f]
[ 0.142512] pci 0000:05:0a.0: reg 0x24: [mem 0xd5008000-0xd50083ff]
[ 0.142519] pci 0000:05:0a.0: reg 0x30: [mem 0xd4000000-0xd407ffff pref]
[ 0.142537] pci 0000:05:0a.0: supports D1 D2
[ 0.142582] pci 0000:05:0b.0: [104c:8023] type 00 class 0x0c0010
[ 0.142594] pci 0000:05:0b.0: reg 0x10: [mem 0xd5009000-0xd50097ff]
[ 0.142602] pci 0000:05:0b.0: reg 0x14: [mem 0xd5000000-0xd5003fff]
[ 0.142644] pci 0000:05:0b.0: supports D1 D2
[ 0.142647] pci 0000:05:0b.0: PME# supported from D0 D1 D2 D3hot
[ 0.142699] pci 0000:05:0c.0: [11ab:4320] type 00 class 0x020000
[ 0.142712] pci 0000:05:0c.0: reg 0x10: [mem 0xd5004000-0xd5007fff]
[ 0.142719] pci 0000:05:0c.0: reg 0x14: [io 0x9400-0x94ff]
[ 0.142745] pci 0000:05:0c.0: reg 0x30: [mem 0xd4000000-0xd401ffff pref]
[ 0.142768] pci 0000:05:0c.0: supports D1 D2
[ 0.142771] pci 0000:05:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.142828] pci 0000:00:09.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.142832] pci 0000:00:09.0: bridge window [io 0x8000-0x9fff]
[ 0.142835] pci 0000:00:09.0: bridge window [mem 0xd4000000-0xd5ffffff]
[ 0.142839] pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.142842] pci 0000:00:09.0: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[ 0.142845] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfec0ffff] (subtractive decode)
[ 0.142848] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.142887] pci 0000:00:0b.0: PCI bridge to [bus 04]
[ 0.142928] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 0.142967] pci 0000:00:0d.0: PCI bridge to [bus 02]
[ 0.143010] pci 0000:01:00.0: [10de:0640] type 00 class 0x030000
[ 0.143019] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 0.143029] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.143039] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit]
[ 0.143046] pci 0000:01:00.0: reg 0x24: [io 0xa000-0xa07f]
[ 0.143053] pci 0000:01:00.0: reg 0x30: [mem 0xd3000000-0xd307ffff pref]
[ 0.148019] pci 0000:00:0e.0: PCI bridge to [bus 01]
[ 0.148023] pci 0000:00:0e.0: bridge window [io 0xa000-0xafff]
[ 0.148026] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd3ffffff]
[ 0.148030] pci 0000:00:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.148255] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.148321] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.148384] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.148447] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.148510] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.148573] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.148636] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.148700] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.148771] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 0.148833] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.148897] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.148960] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 0.149027] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.149097] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.149171] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.149243] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.149336] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 0.149417] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.149499] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.149581] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.149631] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.149721] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.149811] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.149900] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.149988] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.150078] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.150166] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.150255] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.150344] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.150439] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.150534] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.150630] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.151470] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.151514] Found 1 acpi root devices
[ 0.151735] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.151738] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.151740] vgaarb: loaded
[ 0.151742] vgaarb: bridge control possible 0000:01:00.0
[ 0.152041] SCSI subsystem initialized
[ 0.152139] libata version 3.00 loaded.
[ 0.152166] ACPI: bus type USB registered
[ 0.152199] usbcore: registered new interface driver usbfs
[ 0.152211] usbcore: registered new interface driver hub
[ 0.152246] usbcore: registered new device driver usb
[ 0.152390] PCI: Using ACPI for IRQ routing
[ 0.157552] PCI: pci_cache_line_size set to 64 bytes
[ 0.157571] pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] conflicts with PCI Bus #00 [mem 0xfeb00000-0xfec0ffff]
[ 0.157610] Expanded resource reserved due to conflict with PCI Bus #00
[ 0.157612] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.157615] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[ 0.157764] NetLabel: Initializing
[ 0.157766] NetLabel: domain hash size = 128
[ 0.157767] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.157800] NetLabel: unlabeled traffic allowed by default
[ 0.157963] Switched to clocksource refined-jiffies
[ 0.169624] AppArmor: AppArmor Filesystem Enabled
[ 0.169708] pnp: PnP ACPI init
[ 0.169733] ACPI: bus type PNP registered
[ 0.170015] system 00:00: [io 0x4000-0x407f] has been reserved
[ 0.170019] system 00:00: [io 0x4080-0x40ff] has been reserved
[ 0.170022] system 00:00: [io 0x4400-0x447f] has been reserved
[ 0.170025] system 00:00: [io 0x4480-0x44ff] has been reserved
[ 0.170028] system 00:00: [io 0x4800-0x487f] has been reserved
[ 0.170031] system 00:00: [io 0x4880-0x48ff] has been reserved
[ 0.170038] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.170710] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.170714] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.170716] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.170720] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.170735] pnp 00:02: [dma 4]
[ 0.170766] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.170820] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.170857] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.170895] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.171081] pnp 00:06: [dma 2]
[ 0.171128] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.171427] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.171930] pnp 00:08: [dma 3]
[ 0.172012] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.172092] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.172365] pnp 00:0a: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.172602] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.172658] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.172662] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172823] system 00:0d: [mem 0x000f0000-0x000f3fff] could not be reserved
[ 0.172827] system 00:0d: [mem 0x000f4000-0x000f7fff] could not be reserved
[ 0.172830] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.172833] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.172836] system 00:0d: [mem 0x7fff0000-0x7fffffff] could not be reserved
[ 0.172840] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.172843] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.172846] system 00:0d: [mem 0x00100000-0x7ffeffff] could not be reserved
[ 0.172850] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.172853] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.172856] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
[ 0.172859] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.172862] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.172866] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.172869] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.172881] pnp: PnP ACPI: found 14 devices
[ 0.172883] ACPI: bus type PNP unregistered
[ 0.179288] Switched to clocksource acpi_pm
[ 0.179302] pci 0000:05:0c.0: address space collision: [mem 0xd4000000-0xd401ffff pref] conflicts with 0000:05:0a.0 [mem 0xd4000000-0xd407ffff pref]
[ 0.179354] pci 0000:00:09.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref]
[ 0.179357] pci 0000:00:02.1: BAR 0: assigned [mem 0x80100000-0x801000ff]
[ 0.179364] pci 0000:05:0c.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
[ 0.179367] pci 0000:00:09.0: PCI bridge to [bus 05]
[ 0.179370] pci 0000:00:09.0: bridge window [io 0x8000-0x9fff]
[ 0.179374] pci 0000:00:09.0: bridge window [mem 0xd4000000-0xd5ffffff]
[ 0.179377] pci 0000:00:09.0: bridge window [mem 0x80000000-0x800fffff pref]
[ 0.179382] pci 0000:00:0b.0: PCI bridge to [bus 04]
[ 0.179387] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 0.179393] pci 0000:00:0d.0: PCI bridge to [bus 02]
[ 0.179399] pci 0000:00:0e.0: PCI bridge to [bus 01]
[ 0.179402] pci 0000:00:0e.0: bridge window [io 0xa000-0xafff]
[ 0.179405] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd3ffffff]
[ 0.179408] pci 0000:00:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.179413] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.179416] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.179418] pci_bus 0000:00: resource 6 [mem 0xfeb00000-0xfec0ffff]
[ 0.179421] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.179424] pci_bus 0000:05: resource 0 [io 0x8000-0x9fff]
[ 0.179427] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd5ffffff]
[ 0.179429] pci_bus 0000:05: resource 2 [mem 0x80000000-0x800fffff pref]
[ 0.179432] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.179435] pci_bus 0000:05: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.179437] pci_bus 0000:05: resource 6 [mem 0xfeb00000-0xfec0ffff]
[ 0.179440] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.179443] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.179446] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd3ffffff]
[ 0.179448] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.179523] NET: Registered protocol family 2
[ 0.179922] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.179922] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.179922] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.179922] TCP: reno registered
[ 0.179922] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.179922] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.179922] NET: Registered protocol family 1
[ 0.179922] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.252324] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.252486] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.252493] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 0.252500] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.252504] pci 0000:00:0b.0: Linking AER extended capability
[ 0.252539] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.252545] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 0.252552] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.252555] pci 0000:00:0c.0: Linking AER extended capability
[ 0.252593] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.252598] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 0.252605] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.252608] pci 0000:00:0d.0: Linking AER extended capability
[ 0.252649] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.252655] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 0.252662] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.252665] pci 0000:00:0e.0: Linking AER extended capability
[ 0.252694] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.252697] PCI: CLS 32 bytes, default 64
[ 0.252822] Trying to unpack rootfs image as initramfs...
[ 0.744711] Freeing initrd memory: 18836K (ffff880035b26000 - ffff880036d8b000)
[ 0.745224] microcode: AMD CPU family 0xf not supported
[ 0.745227] Scanning for low memory corruption every 60 seconds
[ 0.745617] Initialise system trusted keyring
[ 0.745684] audit: initializing netlink socket (disabled)
[ 0.745705] type=2000 audit(1504772763.743:1): initialized
[ 0.781060] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.783021] zbud: loaded
[ 0.783220] VFS: Disk quotas dquot_6.5.2
[ 0.783302] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.784172] fuse init (API version 7.22)
[ 0.784294] msgmni has been set to 3998
[ 0.784397] Key type big_key registered
[ 0.784801] Key type asymmetric registered
[ 0.784803] Asymmetric key parser 'x509' registered
[ 0.784857] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.784896] io scheduler noop registered
[ 0.784898] io scheduler deadline registered (default)
[ 0.784947] io scheduler cfq registered
[ 0.785121] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 0.785192] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 0.785241] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 0.785293] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[ 0.785356] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.785376] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.785435] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.785436] vesafb: scrolling: redraw
[ 0.785439] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.786040] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90010400000, using 5120k, total 5120k
[ 0.792955] Console: switching to colour frame buffer device 160x64
[ 0.799661] fb0: VESA VGA frame buffer device
[ 0.799703] ipmi message handler version 39.2
[ 0.799807] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.799813] ACPI: Power Button [PWRB]
[ 0.799872] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.799875] ACPI: Power Button [PWRF]
[ 0.799927] ACPI: Fan [FAN] (on)
[ 0.800516] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.800518] ACPI: Thermal Zone [THRM] (40 C)
[ 0.800609] GHES: HEST is not enabled!
[ 0.800751] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.821102] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.822730] Linux agpgart interface v0.103
[ 0.824655] brd: module loaded
[ 0.825636] loop: module loaded
[ 0.826274] libphy: Fixed MDIO Bus: probed
[ 0.826411] tun: Universal TUN/TAP device driver, 1.6
[ 0.826413] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.826464] PPP generic driver version 2.4.2
[ 0.826525] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.826530] ehci-pci: EHCI PCI platform driver
[ 0.826767] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 0.826777] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.826789] ehci-pci 0000:00:02.1: debug port 1
[ 0.826826] ehci-pci 0000:00:02.1: cache line size of 32 is not supported
[ 0.826855] ehci-pci 0000:00:02.1: irq 22, io mem 0x80100000
[ 0.836019] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.836100] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.836103] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.836105] usb usb1: Product: EHCI Host Controller
[ 0.836108] usb usb1: Manufacturer: Linux 3.13.0-128-generic ehci_hcd
[ 0.836110] usb usb1: SerialNumber: 0000:00:02.1
[ 0.836253] hub 1-0:1.0: USB hub found
[ 0.836268] hub 1-0:1.0: 10 ports detected
[ 0.836543] ehci-platform: EHCI generic platform driver
[ 0.836558] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.836560] ohci-pci: OHCI PCI platform driver
[ 0.836712] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 0.836719] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.836752] ohci-pci 0000:00:02.0: irq 23, io mem 0xd6004000
[ 0.894041] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.894044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.894046] usb usb2: Product: OHCI PCI host controller
[ 0.894049] usb usb2: Manufacturer: Linux 3.13.0-128-generic ohci_hcd
[ 0.894051] usb usb2: SerialNumber: 0000:00:02.0
[ 0.894175] hub 2-0:1.0: USB hub found
[ 0.894184] hub 2-0:1.0: 10 ports detected
[ 0.894417] ohci-platform: OHCI generic platform driver
[ 0.894429] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.894520] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.894522] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.895437] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.895582] mousedev: PS/2 mouse device common for all mice
[ 0.895724] rtc_cmos 00:03: RTC can wake from S4
[ 0.895861] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.895886] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram
[ 0.895989] device-mapper: uevent: version 1.0.3
[ 0.896125] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.896136] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.896282] TCP: cubic registered
[ 0.896406] NET: Registered protocol family 10
[ 0.896716] NET: Registered protocol family 17
[ 0.896731] Key type dns_resolver registered
[ 0.896986] Loading compiled-in X.509 certificates
[ 0.898355] Loaded X.509 cert 'Magrathea: Glacier signing key: 82aba0e9db7ab1f53299a7954028d1c1d66a6cf2'
[ 0.898376] registered taskstats version 1
[ 0.901936] Key type trusted registered
[ 0.908042] Key type encrypted registered
[ 0.908051] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.908055] IMA: No TPM chip found, activating TPM-bypass!
[ 0.908344] regulator-dummy: disabling
[ 0.908486] Magic number: 1:764:421
[ 0.908649] rtc_cmos 00:03: setting system clock to 2017-09-07 08:26:04 UTC (1504772764)
[ 0.913060] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[ 0.913062] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[ 0.913154] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.913156] EDD information not available.
[ 0.913197] PM: Hibernation image not present or could not be loaded.
[ 0.916440] Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000)
[ 0.916445] Write protecting the kernel read-only data: 12288k
[ 0.917673] Freeing unused kernel memory: 748K (ffff880001745000 - ffff880001800000)
[ 0.921111] Freeing unused kernel memory: 672K (ffff880001b58000 - ffff880001c00000)
[ 0.924877] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.944334] systemd-udevd[93]: starting version 204
[ 1.014929] Floppy drive(s): fd0 is 1.44M
[ 1.020000] pata_amd 0000:00:06.0: version 0.4.1
[ 1.030090] sata_sil 0000:05:0a.0: version 2.4
[ 1.030413] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 1.030460] sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix
[ 1.034828] FDC 0 is a post-1991 82077
[ 1.039048] scsi0 : pata_amd
[ 1.039203] scsi1 : sata_sil
[ 1.042383] scsi3 : sata_sil
[ 1.042399] scsi2 : pata_amd
[ 1.042465] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.042468] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.042732] sata_nv 0000:00:07.0: version 3.5
[ 1.043065] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 1.047243] scsi5 : sata_nv
[ 1.047352] scsi4 : sata_sil
[ 1.050031] scsi7 : sata_sil
[ 1.050045] scsi6 : sata_nv
[ 1.050120] ata7: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21
[ 1.050123] ata8: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21
[ 1.050549] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 1.051009] ata3: SATA max UDMA/100 mmio m1024@0xd5008000 tf 0xd5008080 irq 19
[ 1.051013] ata4: SATA max UDMA/100 mmio m1024@0xd5008000 tf 0xd50080c0 irq 19
[ 1.051016] ata5: SATA max UDMA/100 mmio m1024@0xd5008000 tf 0xd5008280 irq 19
[ 1.051019] ata6: SATA max UDMA/100 mmio m1024@0xd5008000 tf 0xd50082c0 irq 19
[ 1.051225] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 1.051270] skge: 1.14 addr 0xd5004000 irq 17 chip Yukon-Lite rev 9
[ 1.051513] skge 0000:05:0c.0 eth0: addr 00:13:d4:ea:dd:2c
[ 1.053589] scsi8 : sata_nv
[ 1.056180] scsi9 : sata_nv
[ 1.056264] ata9: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 20
[ 1.056268] ata10: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 20
[ 1.056318] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.056634] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 1.066963] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 1.120140] firewire_ohci 0000:05:0b.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.206832] usb 1-10: new high-speed USB device number 3 using ehci-pci
[ 1.348880] usb 1-10: New USB device found, idVendor=13fe, idProduct=4200
[ 1.348883] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.348886] usb 1-10: Product: USB DISK 2.0
[ 1.348889] usb 1-10: Manufacturer:
[ 1.348891] usb 1-10: SerialNumber: 070849E2E6907089
[ 1.353924] usb-storage 1-10:1.0: USB Mass Storage device detected
[ 1.354043] scsi10 : usb-storage 1-10:1.0
[ 1.354379] usbcore: registered new interface driver usb-storage
[ 1.360154] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.372025] ata3: SATA link down (SStatus 0 SControl 310)
[ 1.376239] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
[ 1.376246] ata2.01: ATAPI: TSSTcorpCD-R/RW SH-R522C, TS03, max UDMA/33
[ 1.376254] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
[ 1.376259] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
[ 1.392178] ata2.00: configured for UDMA/33
[ 1.408187] ata2.01: configured for UDMA/33
[ 1.414598] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
[ 1.421039] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.421042] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.421180] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.421302] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 1.425018] scsi 2:0:1:0: CD-ROM TSSTcorp CD-R/RW SH-R522C TS03 PQ: 0 ANSI: 5
[ 1.427615] sr1: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 1.428046] sr 2:0:1:0: Attached scsi CD-ROM sr1
[ 1.428290] sr 2:0:1:0: Attached scsi generic sg1 type 5
[ 1.524033] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.532102] ata9.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/100
[ 1.532105] ata9.00: 488397168 sectors, multi 1: LBA48 NCQ (not used)
[ 1.548096] ata9.00: configured for UDMA/100
[ 1.580561] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:13:d4:ea:d1:74
[ 1.580565] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 1.620146] firewire_core 0000:05:0b.0: created device fw0: GUID 0011d800006a6978, S400
[ 1.656027] usb 2-4: new low-speed USB device number 2 using ohci-pci
[ 1.740027] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.869071] usb 2-4: New USB device found, idVendor=046d, idProduct=c016
[ 1.869074] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.869077] usb 2-4: Product: Optical USB Mouse
[ 1.869080] usb 2-4: Manufacturer: Logitech
[ 1.877252] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.886673] usbcore: registered new interface driver usbhid
[ 1.886679] usbhid: USB HID core driver
[ 1.889881] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input3
[ 1.890876] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-4/input0
[ 2.060034] ata4: SATA link down (SStatus 0 SControl 310)
[ 2.354160] scsi 10:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6
[ 2.354455] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 2.357792] sd 10:0:0:0: [sda] 15138816 512-byte logical blocks: (7.75 GB/7.21 GiB)
[ 2.361009] sd 10:0:0:0: [sda] Write Protect is off
[ 2.361012] sd 10:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 2.363007] sd 10:0:0:0: [sda] No Caching mode page found
[ 2.363010] sd 10:0:0:0: [sda] Assuming drive cache: write through
[ 2.373010] sd 10:0:0:0: [sda] No Caching mode page found
[ 2.373014] sd 10:0:0:0: [sda] Assuming drive cache: write through
[ 2.375655] sda: sda1
[ 2.380053] ata5: SATA link down (SStatus 0 SControl 310)
[ 2.385013] sd 10:0:0:0: [sda] No Caching mode page found
[ 2.385016] sd 10:0:0:0: [sda] Assuming drive cache: write through
[ 2.385021] sd 10:0:0:0: [sda] Attached SCSI removable disk
[ 2.700031] ata6: SATA link down (SStatus 0 SControl 310)
[ 2.700187] scsi 8:0:0:0: Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 ANSI: 5
[ 2.700432] sd 8:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.700501] sd 8:0:0:0: [sdb] Write Protect is off
[ 2.700505] sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.700534] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.700751] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 2.783483] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
[ 2.784069] sd 8:0:0:0: [sdb] Attached SCSI disk
[ 3.168040] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.176209] ata10.00: ATA-7: SAMSUNG HD400LJ, ZZ100-14, max UDMA7
[ 3.176213] ata10.00: 781422768 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 3.192199] ata10.00: configured for UDMA/133
[ 3.192327] scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD400LJ ZZ10 PQ: 0 ANSI: 5
[ 3.192574] sd 9:0:0:0: [sdc] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 3.192645] sd 9:0:0:0: [sdc] Write Protect is off
[ 3.192648] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.192678] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.192895] sd 9:0:0:0: Attached scsi generic sg4 type 0
[ 3.253528] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 >
[ 3.254038] sd 9:0:0:0: [sdc] Attached SCSI disk
[ 3.481567] random: nonblocking pool is initialized
[ 3.867200] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[ 13.673511] Adding 4272124k swap on /dev/sdb8. Priority:-1 extents:1 across:4272124k FS
[ 13.998723] systemd-udevd[284]: starting version 204
[ 14.185434] lp: driver loaded but no devices found
[ 14.219842] ppdev: user-space parallel port driver
[ 14.236255] parport_pc 00:08: reported by Plug and Play ACPI
[ 14.236315] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 14.332314] lp0: using parport0 (interrupt-driven).
[ 14.440129] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 905kHz
[ 14.482296] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
[ 14.482349] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
[ 14.749531] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.793568] MCE: In-kernel MCE decoding enabled.
[ 14.815523] EDAC MC: Ver: 3.0.0
[ 14.840190] [drm] Initialized drm 1.1.0 20060810
[ 14.843395] AMD64 EDAC driver v3.4.0
[ 14.843447] EDAC amd64: DRAM ECC disabled.
[ 14.843451] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 14.843451] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 14.843451] (Note that use of the override may cause unknown side effects.)
[ 14.974190] wmi: Mapper loaded
[ 15.074010] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 15.074332] checking generic (d1000000 500000) vs hw (c0000000 10000000)
[ 15.074335] checking generic (d1000000 500000) vs hw (d0000000 2000000)
[ 15.074337] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 15.074384] Console: switching to colour dummy device 80x25
[ 15.076550] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 15.078486] [drm] hdmi device not found 1 0 1
[ 15.078575] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x096000a1
[ 15.078578] nouveau [ DEVICE][0000:01:00.0] Chipset: G96 (NV96)
[ 15.078580] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 15.079231] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 15.128956] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 15.128958] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 15.129176] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 15.129180] nouveau [ VBIOS][0000:01:00.0] version 62.94.34.00.00
[ 15.172784] nouveau 0000:01:00.0: irq 44 for MSI/MSI-X
[ 15.172810] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 15.172857] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 15.172859] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 15.172862] nouveau [ PFB][0000:01:00.0] ZCOMP: 2048 tags
[ 15.218417] type=1400 audit(1504765578.804:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=380 comm="apparmor_parser"
[ 15.218431] type=1400 audit(1504765578.804:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=380 comm="apparmor_parser"
[ 15.218438] type=1400 audit(1504765578.804:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=380 comm="apparmor_parser"
[ 15.219757] type=1400 audit(1504765578.804:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=379 comm="apparmor_parser"
[ 15.219771] type=1400 audit(1504765578.804:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=379 comm="apparmor_parser"
[ 15.219777] type=1400 audit(1504765578.804:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=379 comm="apparmor_parser"
[ 15.488173] intel8x0_measure_ac97_clock: measured 55023 usecs (2704 samples)
[ 15.488180] intel8x0: clocking to 46883
[ 15.584338] nouveau [ PTHERM][0000:01:00.0] FAN control: PWM
[ 15.584360] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 15.584401] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 15.584431] nouveau [ CLK][0000:01:00.0] 0f: core 650 MHz shader 1625 MHz memory 500 MHz
[ 15.584473] nouveau [ CLK][0000:01:00.0] --: core 400 MHz shader 800 MHz memory 504 MHz
[ 15.590558] [TTM] Zone kernel: Available graphics memory: 1024912 kiB
[ 15.590564] [TTM] Initializing pool allocator
[ 15.590571] [TTM] Initializing DMA pool allocator
[ 15.590593] nouveau [ DRM] VRAM: 512 MiB
[ 15.590595] nouveau [ DRM] GART: 1048576 MiB
[ 15.590602] nouveau [ DRM] TMDS table version 2.0
[ 15.590605] nouveau [ DRM] DCB version 4.0
[ 15.590609] nouveau [ DRM] DCB outp 00: 02000300 00000028
[ 15.590612] nouveau [ DRM] DCB outp 01: 01000302 00020030
[ 15.590615] nouveau [ DRM] DCB outp 02: 04011310 00000028
[ 15.590617] nouveau [ DRM] DCB outp 03: 02011312 00020030
[ 15.590620] nouveau [ DRM] DCB outp 04: 010223f1 00c0c080
[ 15.590623] nouveau [ DRM] DCB conn 00: 00001030
[ 15.590626] nouveau [ DRM] DCB conn 01: 00002130
[ 15.590628] nouveau [ DRM] DCB conn 02: 00000210
[ 15.590630] nouveau [ DRM] DCB conn 03: 00000211
[ 15.590632] nouveau [ DRM] DCB conn 04: 00000213
[ 15.653629] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 15.653632] nouveau W[ DRM] TV-1 has no encoders, removing
[ 15.655574] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 15.655575] [drm] No driver support for vblank timestamp query.
[ 15.658646] skge 0000:05:0c.0 eth0: enabling interface
[ 15.661956] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.836128] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro
[ 15.925490] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 16.693424] nouveau [ DRM] allocated 1280x1024 fb: 0x70000, bo ffff880070e3a400
[ 16.693743] fbcon: nouveaufb (fb0) is primary device
[ 16.727906] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 16.809086] Console: switching to colour frame buffer device 160x64
[ 16.810077] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 16.810080] nouveau 0000:01:00.0: registered panic notifier
[ 16.810089] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[ 19.249866] type=1400 audit(1504765582.836:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=731 comm="apparmor_parser"
[ 19.249879] type=1400 audit(1504765582.836:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=731 comm="apparmor_parser"
[ 19.498585] init: cups main process (740) killed by HUP signal
[ 19.498607] init: cups main process ended, respawning
[ 19.562294] Bluetooth: Core ver 2.17
[ 19.562345] NET: Registered protocol family 31
[ 19.562347] Bluetooth: HCI device and connection manager initialized
[ 19.565689] Bluetooth: HCI socket layer initialized
[ 19.565699] Bluetooth: L2CAP socket layer initialized
[ 19.565714] Bluetooth: SCO socket layer initialized
[ 19.622702] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.622710] Bluetooth: BNEP filters: protocol multicast
[ 19.622727] Bluetooth: BNEP socket layer initialized
[ 19.623790] Bluetooth: RFCOMM TTY layer initialized
[ 19.623811] Bluetooth: RFCOMM socket layer initialized
[ 19.623824] Bluetooth: RFCOMM ver 1.11
[ 20.377030] init: samba-ad-dc main process (781) terminated with status 1
[ 21.843271] skge: eth0: autonegotiation failed (speed/duplex)
[ 27.967543] skge: eth0: autonegotiation failed (speed/duplex)
[ 34.091815] skge: eth0: autonegotiation failed (speed/duplex)
[ 40.216086] skge: eth0: autonegotiation failed (speed/duplex)
[ 43.258953] skge 0000:05:0c.0 eth0: Link is down
[ 46.340347] skge: eth0: autonegotiation failed (speed/duplex)
[ 49.382880] skge 0000:05:0c.0 eth0: Link is down
[ 49.418355] type=1400 audit(1504765613.003:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=855 comm="apparmor_parser"
[ 49.418371] type=1400 audit(1504765613.003:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=855 comm="apparmor_parser"
[ 50.038727] type=1400 audit(1504765613.623:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=878 comm="apparmor_parser"
[ 55.568746] skge: eth0: autonegotiation failed (speed/duplex)
[ 64.797045] skge: eth0: autonegotiation failed (speed/duplex)
[ 67.838463] skge 0000:05:0c.0 eth0: Link is down
[ 70.921417] skge: eth0: autonegotiation failed (speed/duplex)
[ 77.045687] skge: eth0: autonegotiation failed (speed/duplex)
[ 83.170192] skge 0000:05:0c.0 eth0: Link is up at 100 Mbps, half duplex, flow control none
[ 83.170223] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 103.086419] init: failsafe main process (640) killed by TERM signal
[ 103.309352] init: network-manager main process (1058) terminated with status 127
[ 103.309374] init: network-manager main process ended, respawning
[ 103.610208] type=1400 audit(1504765667.199:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1123 comm="apparmor_parser"
[ 103.610223] type=1400 audit(1504765667.199:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=1123 comm="apparmor_parser"
[ 103.613832] type=1400 audit(1504765667.203:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1124 comm="apparmor_parser"
[ 103.613848] type=1400 audit(1504765667.203:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1124 comm="apparmor_parser"
[ 103.613855] type=1400 audit(1504765667.203:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1124 comm="apparmor_parser"
[ 103.632249] type=1400 audit(1504765667.223:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=1125 comm="apparmor_parser"
[ 103.632264] type=1400 audit(1504765667.223:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1125 comm="apparmor_parser"
[ 103.632271] type=1400 audit(1504765667.223:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=1125 comm="apparmor_parser"
[ 103.632276] type=1400 audit(1504765667.223:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1125 comm="apparmor_parser"
[ 103.632282] type=1400 audit(1504765667.223:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=1125 comm="apparmor_parser"les messages d'erreur qui allaient avec :
phil@PHILNOIR:/media/Dusb$ cd /media/Dusb/; echo 'whoami' > titi67.txt; whoami >> titi67.txt; echo >> titi67.txt; echo 'hosts' >> titi67.txt; cat /etc/hosts |head -2 >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'dpkg -l|grep usb' >> titi67.txt; dpkg -l|grep usb >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'lsusb' >> titi67.txt; lsusb >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'ls -la --group-directories-first /media' >> titi67.txt; ls -la --group-directories-first /media >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'ls -la --group-directories-first /media/*' >> titi67.txt; ls -la --group-directories-first /media/* >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'ls -la --group-directories-first /media/*/*' >> titi67.txt; ls -la --group-directories-first /media/*/* >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'fstab' >> titi67.txt; ls -l /etc/fstab
ls: impossible d'ouvrir le répertoire /media/juliette: Permission non accordée
ls: impossible d'ouvrir le répertoire /media/nad: Permission non accordée
ls: impossible d'ouvrir le répertoire /media/phil/1 windows(C): Permission non accordée
ls: impossible d'ouvrir le répertoire /media/phil/54A6EB745CA4B4BC: Permission non accordée
-rw-r--r-- 1 root root 919 août 27 10:20 /etc/fstab
phil@PHILNOIR:/media/Dusb$ >> titi67.txt; echo '==========' >> titi67.txt; cat /etc/fstab >> titi67.txt; echo >> titi67.txt; echo '==========' >> titi67.txt; echo >> titi67.txt; echo 'sudo cat /var/log/dmesg' >> titi67.txt; sudo cat /var/log/dmesg >> titi67.txt; cd;J'essaie de faire au mieux pour suivre tes conseils, désolé si ce n'est pas toujours parfait.
Merci bien
Hors ligne
#71 Le 07/09/2017, à 13:38
- moko138
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Tu t'embêtes inutilement avec sed.
Comme tu as installé gpm, tu peux, même en tty,
- sélectionner-copier du texte à la souris (par cliquer-glisser)
- et le coller d'un clic milieu.
Donc je t'invite à copier le contenu de ce message sur ta clef, (toto170907a.txt, par exemple). Ainsi tu pourras, depuis le tty, en sélectionner-copier des morceaux, et les coller plus bas dans le tty.
Débranche ta clef usb.
Logué en tant que phil,
Rebranche ta clef,
attends une 20ne de secondes,
fais
df -Th | grep vfatvois-tu ta clef MYUSBCAST (d'uuid E645-4AF9) ?
- Si oui, note son point de montage (en principe /media/phil/MYUSBCAST).
- Si non,
pour la repérer, fais :
sudo lsblk -o name,fstype,size,label,mountpoint | grep MY ## Respecte bien les majuscules.En supposant que la réponse soit
├─sdd1 vfat (...) MYUSBCAST
tu la montes alors par
sudo mount /dev/sdd1 /media/phil/MYUSBCASTEt tu peux afficher tout le fichier :
cat /media/phil/MYUSBCAST/toto170907a.txtou un extrait :
cat /media/phil/MYUSBCAST/toto170907a.txt | head 37 | tail -12Ensuite, fais :
df -Th | grep ntfs | grep phil(Le | s'obtient par AltGr 6).
Le retour devrait être vide vu notre fstab provisoire. Si le retour est bien vide, tu vas faire :
cd /media/phil ## TRES important !puis :
sudo rmdir "54A6EB745CA4B4BC"sudo rmdir "1 windows(C)"sudo rmdir "2_VideoActif(G)"Là, tu te demandes si ça ne vide pas les partitions correspondantes.
Eh bien non, puisque tu viens de vérifier par df -Th | grep ntfs | grep phil que ces partitions n'étaient pas montées (=retour vide). De fait, nous ne supprimons que leurs points de montage erronés, des coquilles vides (vides puisque les partitions n'y sont pas montées).
Puis
tu remontes d'un échelon :
cd /media ## TRES important !sudo rmdir juliettesudo rmdir nad(Ces deux derniers répertoires seront recréés automatiquement et correctement quand juliette et nad se logueront.)
Exécute enfin
cd /media/phil/MYUSBCAST; ls /media > toto999.txt; echo '====' >> toto999.txt; ls /media/* >> toto999.txt; cdTu peux démonter ta clef :
sudo umount /media/phil/MYUSBCASTet redémarrer alors sur un système un peu plus propre.
- -
parce que j'avais des messages d'erreur "impossible d'ouvrir le répertoire /media/..."
phil est habilité à ouvrir /media/phil, pas les autres /media/user***. Donc ces messages sont normaux. Ça fait partie de la sécurité.
- -
Note :
En tty comme dans le terminal, pense à la flèche haut pour rappeler des commandes récentes.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#72 Le 07/09/2017, à 16:28
- philoeil
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Bonjour,
Merci pour l'aide apportée
Voici le retour des commandes, il ya des retours d'erreurs, j'ai fais des boulettes?:(
Ubuntu 14.04.2 LTS PHILNOIR tty2
PHILNOIR login: phil
Password:
Last login: Thu Sep 7 08:36:28 CEST 2017 on tty2
Welcome to Ubuntu 14.04.2 LTS (GNU/Linux 3.13.0-128-generic x86_64)
* Documentation: https://help.ubuntu.com/
31 packages can be updated.
31 updates are security updates.
phil@PHILNOIR:~$ [ 618.030829] sd 10:0:0:0: [sdc] No Caching mode page found
[ 618.030864] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 618.042828] sd 10:0:0:0: [sdc] No Caching mode page found
[ 618.042865] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 618.061838] sd 10:0:0:0: [sdc] No Caching mode page found
[ 618.061874] sd 10:0:0:0: [sdc] Assuming drive cache: write through
phil@PHILNOIR:~$ df -Th | grep vfat
df: «/run/user/112/gvfs»: Permission non accordée
phil@PHILNOIR:~$ sudo df -Th | grep vfat
[sudo] password for phil:
phil@PHILNOIR:~$ sudo df -Th | grep vfat
phil@PHILNOIR:~$ df -Th | grep vfat
df: «/run/user/112/gvfs»: Permission non accordée
phil@PHILNOIR:~$ sudo lsblk -o name,fstype,size,label,mountpoint | grep MY
└─sdc1 vfat 7,2G MYUSBCAST
phil@PHILNOIR:~$ sudo mount /dev/sdc1 /media/phil/MYUSBCAT
mount : le point de montage /media/phil/MYUSBCAT n'existe pas
phil@PHILNOIR:~$ mkdir /media/phil/MYUSBCAT
mkdir: impossible de créer le répertoire «/media/phil/MYUSBCAT»: Permission non accordée
phil@PHILNOIR:~$ cd /media/phil
phil@PHILNOIR:/media/phil$ sudo mkdir MYUSBCAT
phil@PHILNOIR:/media/phil$ sudo mount /dev/sdc1 /media/phil/MYUSBCAT
phil@PHILNOIR:/media/phil$ cd MYUSBCAT/
phil@PHILNOIR:/media/phil/MYUSBCAT$
'================================== seconde erreur à voir :
phil@PHILNOIR:/media/phil$ ls -l
total 20
drwx------ 2 root root 4096 mai 14 21:27 1 windows(C)
drwxr-xr-x 2 root root 4096 mai 30 20:20 2_VideoActif(G)
drwx------ 2 root root 4096 mai 14 21:27 54A6EB745CA4B4BC
drwxr-xr-x 7 root root 8192 janv. 1 1970 MYUSBCAT
phil@PHILNOIR:/media/phil$
phil@PHILNOIR:/media/phil$ sudo chmod -v 760 MYUSBCAT
[sudo] password for phil:
le mode de «MYUSBCAT» a été modifié de 0755 (rwxr-xr-x) en 0760 (rwxrw----)
phil@PHILNOIR:/media/phil$ ls -l
total 20
drwx------ 2 root root 4096 mai 14 21:27 1 windows(C)
drwxr-xr-x 2 root root 4096 mai 30 20:20 2_VideoActif(G)
drwx------ 2 root root 4096 mai 14 21:27 54A6EB745CA4B4BC
drwxr-xr-x 7 root root 8192 janv. 1 1970 MYUSBCAT
phil@PHILNOIR:/media/phil$
' ======================= j'ai remonté ma clef finalement comme j'en ai l'habitude
phil@PHILNOIR:/media/phil$ sudo umount -v MYUSBCAT
/dev/sdc1 has been unmounted
phil@PHILNOIR:/media/phil$ sudo mount -o defaults,rw,user,umask=022,uid=1000 /dev/sdc1 /media/phil/MYUSBCAT
phil@PHILNOIR:/media/phil$ ls -l
total 20
drwx------ 2 root root 4096 mai 14 21:27 1 windows(C)
drwxr-xr-x 2 root root 4096 mai 30 20:20 2_VideoActif(G)
drwx------ 2 root root 4096 mai 14 21:27 54A6EB745CA4B4BC
drwxr-xr-x 7 phil root 8192 sept. 7 16:41 MYUSBCAT
phil@PHILNOIR:/media/phil$
'===================
phil@PHILNOIR:/media/phil/MYUSBCAT$ df -Th | grep ntfs | grep phil
df: «/run/user/112/gvfs»: Permission non accordée '???pourquoi ???????????????
phil@PHILNOIR:/media/phil/MYUSBCAT$ sudo df -Th | grep ntfs | grep phil
phil@PHILNOIR:/media/phil/MYUSBCAT$
'================
phil@PHILNOIR:/media/phil/MYUSBCAT$ df -Th | grep ntfs | grep phil
df: «/run/user/112/gvfs»: Permission non accordée
phil@PHILNOIR:/media/phil/MYUSBCAT$ sudo df -Th | grep ntfs | grep phil
phil@PHILNOIR:/media/phil/MYUSBCAT$ cd /media/phil
phil@PHILNOIR:/media/phil$ sudo rmdir "54A6EB745CA4B4BC"
phil@PHILNOIR:/media/phil$ sudo rmdir -v "1 windows(C)"
rmdir: suppression du répertoire «1 windows(C)»
phil@PHILNOIR:/media/phil$ sudo rmdir -v "2_VideoActif(G)"
rmdir: suppression du répertoire «2_VideoActif(G)»
phil@PHILNOIR:/media/phil$ cd /media
phil@PHILNOIR:/media$ sudo rmdir -v juliette
rmdir: suppression du répertoire «juliette»
phil@PHILNOIR:/media$ sudo rmdir nad
rmdir: échec de suppression de «nad»: Le dossier n'est pas vide ' Erreur ==============
'===========================
phil@PHILNOIR:/media/phil/MYUSBCAT$ cd /media/phil/MYUSBCAT; ls /media > toto999.txt; echo '====' >> toto999.txt; ls /media/* >> toto999.txt; cd
ls: impossible d'ouvrir le répertoire /media/nad: Permission non accordée ' Erreur ==============
phil@PHILNOIR:~$et la dernière ::
Dusb
floppy
floppy0
grub-customizer_recovery_root_mountpoint
nad
phil
====
/media/Dusb:
/media/floppy:
/media/floppy0:
/media/grub-customizer_recovery_root_mountpoint:
/media/phil:
MYUSBCATPour info le sytem de se lance toujours pas après l'étape identification utilisateurs.
Hors ligne
#73 Le 08/09/2017, à 06:31
- moko138
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
phil@PHILNOIR:/media/phil$ sudo mount /dev/sdc1 /media/phil/MYUSBCAT phil@PHILNOIR:/media/phil$
Le montage au point normal, prévu par la convention Linux sur l'arborescence, avait parfaitement fonctionné. Puis...
j'ai remonté ma clef finalement comme j'en ai l'habitude
Renouer avec une mauvaise habitude te rassure mais ça reste une mauvaise habitude. Et une source de malentendus. Voire d'erreurs :
Car quand on te demande sur le forum de rediriger une commande vers la clef d'étiquette "MYUSBCAST", tout le monde s'attend à
commande > (=écraser) /media/phil/MYUSBCAST/mon-fichier.txt
ou
commande >> (=ajouter) /media/phil/MYUSBCAST/mon-fichier.txt
Donc, logué en tant que phil et comme plus haut :
sudo mkdir /media/phil/MYUSBCASTrepérage de la lettre avec
sudo lsblk -o name,fstype,size,label,mountpoint | grep MYsi la lettre est toujours "d" :
sudo mount /dev/sdd1 /media/phil/MYUSBCAST- -
df -Th | grep ntfs | grep phil df: «/run/user/112/gvfs»: Permission non accordée '???pourquoi ??????
Nous aurons sans doute des éclaircissements dans les retours de
df -Th >> /media/phil/MYUSBCAST/df-170908.txtecho >> /media/phil/MYUSBCAST/df-170908.txtdf -Ti >> /media/phil/MYUSBCAST/df-170908.txtet de
cat /etc/group |grep -E "112|gvfs" >> /media/phil/MYUSBCAST/df-170908.txt(en supposant la clef montée au point prévu.)
- -
Bizarreries à explorer :
sudo rmdir nad rmdir: échec de suppression de «nad»: Le dossier n'est pas vide
Oui, nous avions plus haut ces anomalies :
/media/nad/1_ImageActif: total 8 drwxr-xr-x 2 root root 4096 mai 30 19:45 . drwxr-x---+ 5 root root 4096 juil. 11 22:15 .. /media/nad/1_Jeux: total 8 drwxr-xr-x 2 root root 4096 mai 30 19:47 . drwxr-x---+ 5 root root 4096 juil. 11 22:15 .. /media/nad/2_Prog_files(D): total 8 drwxr-xr-x 2 root root 4096 mai 14 21:27 . drwxr-x---+ 5 root root 4096 juil. 11 22:15 ..
Et en #60 tu avais précisé :
sdb7 ntfs 1_imageActif 58,5 Go contient des images, videos
Donc, tu vérifies que la coquille est vide (partition non montée) par
mount -l |grep ImageActif ## GAFFE aux majuscules !
# d'ailleurs avec la sélection à la souris (si tu as pris
# la précaution de copier le contenu de ce message
# dans ta clef) on évite les erreurs de casse.Le retour doit être vide (grâce à notre fstab provisoire).
Si le retour est bien vide, tu nettoies :
sudo rm -Rvi /media/nadGrâce à l'option -i, une confirmation te sera demandée pour chaque élément, soit :
1_ImageActif
1_Jeux
2_Prog_files(D)
nad
Tu valideras ces 4 là.
(\Program Files\ ne doit être monté qu'exceptionnellement.
Pour ImageActif et Jeux, nous nous occuperons de leur montage correct quand le problème principal sera réglé).
- -
Suspicion de problème graphique
Fais
cd /media/phil/MYUSBCASTlspci -nnk | grep -Ei -A 4 "VGA|3D|Display" > cg-17098.txtecho >> cg-17098.txtecho '=======' >> cg-17098.txtecho >> cg-17098.txtgrep /drivers/ /var/log/Xorg.0.log >> cg-17098.txtDans le même ordre d'idée, je ne vois pas le retour des history.log.x.gz demandé en #58. Donc
cd /media/phil/MYUSBCASTecho 'zless /var/log/apt/history.log.1.gz' > titi4545.txtzless /var/log/apt/history.log.1.gz >> titi4545.txtecho -e '\n= = = = = = = =\n' >> titi4545.txtecho 'zless /var/log/apt/history.log.2.gz' >> titi4545.txtzless /var/log/apt/history.log.2.gz >> titi4545.txtPuis tu donneras le contenu des fichiers ainsi créés (df-170908.txt, cg-17098.txt et titi4545.txt).
P.S. : ton windows démarre-t-il normalement ?
Dernière modification par moko138 (Le 08/09/2017, à 06:53)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#74 Le 08/09/2017, à 12:10
- philoeil
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Bonjour,
Merci encore pour l'aide
Je commence par la fin :
P.S. : ton windows démarre-t-il normalement ?
Oui sans message d'erreur
Je commence par le retour sur toutes les actions faites pour relater le traitement des actions demandées :
Ubuntu 14.04.2 LTS PHILNOIR tty2
PHILNOIR login: phil 'je demarre et me log sur phil (j'ai ouvert 2 terminal tty2 et tty3 pour copier plus facilement les messages est-ce un probleme?)====
Password:
Last login: Fri Sep 8 11:28:42 CEST 2017 on tty3
Welcome to Ubuntu 14.04.2 LTS (GNU/Linux 3.13.0-128-generic x86_64)
* Documentation: https://help.ubuntu.com/
phil@PHILNOIR:~$ [ 126.346709] sd 10:0:0:0: [sdc] No Caching mode page found '============== ici j'ai branché la clef MYUSBCAST
[ 126.346741] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 126.358701] sd 10:0:0:0: [sdc] No Caching mode page found
[ 126.358737] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 126.377713] sd 10:0:0:0: [sdc] No Caching mode page found
[ 126.377744] sd 10:0:0:0: [sdc] Assuming drive cache: write through '============== ici le terminal est bloqué plus d'1 mn si je ne fait pas "entree"
'======================= je m'étais trompé dans le nommage du dossier MYUSBCAST que j'avais appelé MYUSBCAT (sans le S) je l'ai supprimé et recréé MYUSBCAST :
phil@PHILNOIR:/media/phil$ sudo mkdir MYUSBCAST
phil@PHILNOIR:/media/phil$ ls
MYUSBCAST
phil@PHILNOIR:/media/phil$ sudo lsblk -o name,fstype,size,mountpoint | grep MY '===================== marche pas ? pourquoi
phil@PHILNOIR:/media/phil$ [ 1356.991779] sd 11:0:0:0: [sdc] No Caching mode page found '===============J'ai débranché et rebranché MYUSBCAST
[ 1356.992259] sd 11:0:0:0: [sdc] Assuming drive cache: write through
[ 1357.006798] sd 11:0:0:0: [sdc] No Caching mode page found
[ 1357.007219] sd 11:0:0:0: [sdc] Assuming drive cache: write through
[ 1357.025789] sd 11:0:0:0: [sdc] No Caching mode page found
[ 1357.026228] sd 11:0:0:0: [sdc] Assuming drive cache: write through ' ==========ici terminal bloqué = "ENTREE" pour sortir
phil@PHILNOIR:/media/phil$ sudo lsblk -o name,fstype,size,mountpoint | grep MY '===========toujours rien ?
phil@PHILNOIR:/media/phil$
'=========================
phil@PHILNOIR:/dev$ sudo lsblk -o name,fstype,size,mountpoint
NAME FSTYPE SIZE MOUNTPOINT
sda 232,9G
├─sda1 ntfs 39,3G
├─sda2 1K
├─sda5 ext4 109,1G /home
├─sda6 ntfs 43,2G
├─sda7 ext4 37,2G /
└─sda8 swap 4,1G [SWAP]
sdb 372,6G
├─sdb1 ntfs 108,8G
├─sdb2 1K
├─sdb5 ntfs 126,1G /mnt/79EC7D3D53F9F6C2
├─sdb6 ntfs 78,2G
└─sdb7 ntfs 59,5G
sdc 7,2G
└─sdc1 vfat 7,2G
sr0 1024M
sr1 1024M
phil@PHILNOIR:/dev$
'======================= je monte au mieux
phil@PHILNOIR:/media/phil$ sudo mount /dev/sdc1 /media/phil/MYUSBCAST
phil@PHILNOIR:/media/phil/MYUSBCAST$ ls
280817_cmd2.txt cmd60917.txt ex5 repos21_1.txt ret2_1908.txt ret4_2608.txt System Volume Information titiold3_67.txt
280817_cmd.txt cmd709.txt ex5err.txt Ret_0709_14.txt ret2_260817.txt ret70917.txt titi1_67.txt titiOld67.txt
73Forum.txt cmddf.txt fstab ret1_1708.txt ret2_2708.txt retFstab2608.txt titi23.txt titi.txt
Black liste err1908.log histo2.txt ret1_1908.txt ret2_300817.txt retour090817.txt titi2.txt toto999.txt
CAF err1908.txt historictiti.txt ret1_2708.txt ret300817.txt retour160817.txt titi3.txt uname1.txt
cm1.txt erreur_titi23.txt old2_titi23.txt ret160817.txt ret3_1708_.txt retourTermLog.txt titi45.txt
cm22.txt Ess1.txt oldtiti23.txt ret170817.txt ret3_1908.txt soucelist.txt titi67.txt
cm_60917.txt essai.txt repo21_1.txt ret2_070917.txt ret3_2608.txt source2.txt titiOLD1_67.txt
cmd160817.txt ess.txt reponses080817.txt ret2_1708.txt Ret4_1908.txt SyncPodcast titiOld2_67.txt
phil@PHILNOIR:/media/phil/MYUSBCAST$ mv -v /home/phil/ret73.txt ret73.txt
«/home/phil/ret73.txt» -> «ret73.txt»
mv: impossible de créer le fichier standard «ret73.txt»: Permission non accordée '=========================les options de montage semblent insuffisantes ?
phil@PHILNOIR:/media/phil/MYUSBCAST$
'============== j'ai remonté comme hier mais j'ai oublié de copier coller le retour d'écran, cette fois les permissions semblent bonnes
phil@PHILNOIR:/media/phil/MYUSBCAST$ mv -v /home/phil/ret73.txt ret73.txt '============
«/home/phil/ret73.txt» -> «ret73.txt»
«/home/phil/ret73.txt» supprimé
phil@PHILNOIR:/media/phil/MYUSBCAST$
'=================== a aprtir de là je peux passer en copier coller des commandes de ton message 73 du forum
========== les retours demandés :
phil@PHILNOIR:/media/phil/MYUSBCAST$ df -Th >> /media/phil/MYUSBCAST/df-170908.txt
df: «/run/user/112/gvfs»: Permission non accordée
phil@PHILNOIR:/media/phil/MYUSBCAST$
phil@PHILNOIR:/media/phil/MYUSBCAST$ echo >> /media/phil/MYUSBCAST/df-170908.txt
phil@PHILNOIR:/media/phil/MYUSBCAST$ df -Ti >> /media/phil/MYUSBCAST/df-170908.txt
df: «/run/user/112/gvfs»: Permission non accordée
phil@PHILNOIR:/media/phil/MYUSBCAST$
phil@PHILNOIR:/media/phil/MYUSBCAST$ cat /etc/group |grep -E "112|gvfs" >> /media/phil/MYUSBCAST/df-170908.txt
phil@PHILNOIR:/media/phil/MYUSBCAST$ mount -l |grep ImageActif '==================== le retour est bien vide
phil@PHILNOIR:/media/phil/MYUSBCAST$
phil@PHILNOIR:/media/phil/MYUSBCAST$ sudo rm -Rvi /media/nad
[sudo] password for phil:
rm : descendre dans le répertoire «/media/nad» ? Y
rm : supprimer répertoire «/media/nad/1_ImageActif» ? Y
répertoire supprimé : «/media/nad/1_ImageActif»
rm : supprimer répertoire «/media/nad/2_Prog_files(D)» ? Y
répertoire supprimé : «/media/nad/2_Prog_files(D)»
rm : supprimer répertoire «/media/nad/1_Jeux» ? Y
répertoire supprimé : «/media/nad/1_Jeux»
rm : supprimer répertoire «/media/nad» ? Y
répertoire supprimé : «/media/nad»
phil@PHILNOIR:/media/phil/MYUSBCAST$
phil@PHILNOIR:/media/phil/MYUSBCAST$ lspci -nnk | grep -Ei -A 4 "VGA|3D|Display" > cg-17098.txt
phil@PHILNOIR:/media/phil/MYUSBCAST$ echo >> cg-17098.txt
phil@PHILNOIR:/media/phil/MYUSBCAST$ echo '=======' >> cg-17098.txt
phil@PHILNOIR:/media/phil/MYUSBCAST$ echo >> cg-17098.txt
phil@PHILNOIR:/media/phil/MYUSBCAST$ grep /drivers/ /var/log/Xorg.0.log >> cg-17098.txt
phil@PHILNOIR:/media/phil/MYUSBCAST$ echo 'zless /var/log/apt/history.log.1.gz' > titi4545.txt
phil@PHILNOIR:/media/phil/MYUSBCAST$ zless /var/log/apt/history.log.1.gz >> titi4545.txt
phil@PHILNOIR:/media/phil/MYUSBCAST$ echo -e '\n= = = = = = = =\n' >> titi4545.txt
phil@PHILNOIR:/media/phil/MYUSBCAST$ echo 'zless /var/log/apt/history.log.2.gz' >> titi4545.txt
phil@PHILNOIR:/media/phil/MYUSBCAST$ zless /var/log/apt/history.log.2.gz >> titi4545.txt
phil@PHILNOIR:/media/phil/MYUSBCAST$puis le retour df-170908.txt
Sys. de fichiers Type Taille Utilisé Dispo Uti% Monté sur
/dev/sda7 ext4 37G 6,2G 29G 18% /
none tmpfs 4,0K 0 4,0K 0% /sys/fs/cgroup
udev devtmpfs 991M 4,0K 991M 1% /dev
tmpfs tmpfs 201M 1,4M 199M 1% /run
none tmpfs 5,0M 0 5,0M 0% /run/lock
none tmpfs 1001M 0 1001M 0% /run/shm
none tmpfs 100M 4,0K 100M 1% /run/user
/dev/sdb5 fuseblk 127G 30G 97G 24% /mnt/79EC7D3D53F9F6C2
/dev/sda5 ext4 108G 75G 28G 74% /home
/dev/sdc1 vfat 7,2G 6,2G 1,1G 86% /media/phil/MYUSBCAST
Sys. de fichiers Type Inœuds IUtil. ILibre IUti% Monté sur
/dev/sda7 ext4 2436448 251119 2185329 11% /
none tmpfs 256228 2 256226 1% /sys/fs/cgroup
udev devtmpfs 253528 528 253000 1% /dev
tmpfs tmpfs 256228 581 255647 1% /run
none tmpfs 256228 3 256225 1% /run/lock
none tmpfs 256228 1 256227 1% /run/shm
none tmpfs 256228 8 256220 1% /run/user
/dev/sdb5 fuseblk 100850124 48238 100801886 1% /mnt/79EC7D3D53F9F6C2
/dev/sda5 ext4 7151616 158144 6993472 3% /home
/dev/sdc1 vfat 0 0 0 - /media/phil/MYUSBCAST
utempter:x:112:Le retour cg-17098.txt :
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G96 [GeForce 9500 GT] [10de:0640] (rev a1)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:3491]
Kernel driver in use: nouveau
05:0a.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller [1095:3114] (rev 02)
Subsystem: ASUSTeK Computer Inc. A8N-SLI Deluxe/Premium Mainboard [1043:8167]
=======
[ 30.799] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 30.836] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 30.836] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 30.837] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 30.838] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 30.838] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 30.839] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 30.844] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.sole retour titi45.txt
zless /var/log/apt/history.log.1.gz
Start-Date: 2017-08-01 21:51:17
Commandline: apt full-upgrade
Install: linux-image-3.13.0-125-generic:amd64 (3.13.0-125.174, automatic), linux-image-extra-3.13.0-125-generic:amd64 (3.13.0-125.174, automatic), linux-headers-3.13.0-125-generic:amd64 (3.13.0-125.174, automatic), linux-headers-3.13.0-125:amd64 (3.13.0-125.174, automatic)
Upgrade: python3-problem-report:amd64 (2.14.1-0ubuntu3.23, 2.14.1-0ubuntu3.25), linux-headers-generic:amd64 (3.13.0.123.133, 3.13.0.125.135), python-samba:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), libkrb5-26-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), libroken18-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), libdrm-intel1:amd64 (2.4.60-2~ubuntu14.04.1, 2.4.67-1ubuntu0.14.04.2), libwind0-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), perlmagick:amd64 (6.7.7.10-6ubuntu3.7, 6.7.7.10-6ubuntu3.9), libhcrypto4-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), libdrm-radeon1:amd64 (2.4.60-2~ubuntu14.04.1, 2.4.67-1ubuntu0.14.04.2), samba:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), libheimntlm0-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), xserver-xorg-core:amd64 (1.15.1-0ubuntu2.7, 1.15.1-0ubuntu2.9), samba-dsdb-modules:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), libmagickcore5-extra:amd64 (6.7.7.10-6ubuntu3.7, 6.7.7.10-6ubuntu3.9), xserver-common:amd64 (1.15.1-0ubuntu2.7, 1.15.1-0ubuntu2.9), libspice-server1:amd64 (0.12.4-0nocelt2ubuntu1.4, 0.12.4-0nocelt2ubuntu1.5), samba-common-bin:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), libasn1-8-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), libmagickwand5:amd64 (6.7.7.10-6ubuntu3.7, 6.7.7.10-6ubuntu3.9), gdb:amd64 (7.7.1-0ubuntu5~14.04.2, 7.7.1-0ubuntu5~14.04.3), samba-libs:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), mysql-common:amd64 (5.5.55-0ubuntu0.14.04.1, 5.5.57-0ubuntu0.14.04.1), imagemagick:amd64 (6.7.7.10-6ubuntu3.7, 6.7.7.10-6ubuntu3.9), libdrm-nouveau2:amd64 (2.4.60-2~ubuntu14.04.1, 2.4.67-1ubuntu0.14.04.2), libmysqlclient18:amd64 (5.5.55-0ubuntu0.14.04.1, 5.5.57-0ubuntu0.14.04.1), libheimbase1-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), smbclient:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), apport-gtk:amd64 (2.14.1-0ubuntu3.23, 2.14.1-0ubuntu3.25), apport:amd64 (2.14.1-0ubuntu3.23, 2.14.1-0ubuntu3.25), libmagickcore5:amd64 (6.7.7.10-6ubuntu3.7, 6.7.7.10-6ubuntu3.9), libexpat1:amd64 (2.1.0-4ubuntu1.3, 2.1.0-4ubuntu1.4), python3-apport:amd64 (2.14.1-0ubuntu3.23, 2.14.1-0ubuntu3.25), imagemagick-common:amd64 (6.7.7.10-6ubuntu3.7, 6.7.7.10-6ubuntu3.9), libwbclient0:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), libgssapi3-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), samba-vfs-modules:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), linux-libc-dev:amd64 (3.13.0-123.172, 3.13.0-125.174), samba-common:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), libhx509-5-heimdal:amd64 (1.6~git20131207+dfsg-1ubuntu1.1, 1.6~git20131207+dfsg-1ubuntu1.2), libdrm2:amd64 (2.4.60-2~ubuntu14.04.1, 2.4.67-1ubuntu0.14.04.2), linux-image-generic:amd64 (3.13.0.123.133, 3.13.0.125.135), libsmbclient:amd64 (4.3.11+dfsg-0ubuntu0.14.04.9, 4.3.11+dfsg-0ubuntu0.14.04.10), linux-generic:amd64 (3.13.0.123.133, 3.13.0.125.135)
End-Date: 2017-08-01 21:56:53
Start-Date: 2017-08-07 21:18:01
Commandline: apt-get dist-upgrade
Install: linux-headers-3.13.0-126-generic:amd64 (3.13.0-126.175, automatic), linux-image-3.13.0-126-generic:amd64 (3.13.0-126.175, automatic), linux-image-extra-3.13.0-126-generic:amd64 (3.13.0-126.175, automatic), linux-headers-3.13.0-126:amd64 (3.13.0-126.175, automatic)
Upgrade: linux-headers-generic:amd64 (3.13.0.125.135, 3.13.0.126.136), libfreerdp1:amd64 (1.0.2-2ubuntu1, 1.0.2-2ubuntu1.1), linux-libc-dev:amd64 (3.13.0-125.174, 3.13.0-126.175), linux-image-generic:amd64 (3.13.0.125.135, 3.13.0.126.136), linux-generic:amd64 (3.13.0.125.135, 3.13.0.126.136)
End-Date: 2017-08-07 21:26:34
Start-Date: 2017-08-07 21:29:00
Commandline: apt-get autoremove --purge
Purge: linux-image-3.13.0-123-generic:amd64 (3.13.0-123.172), linux-image-extra-3.13.0-123-generic:amd64 (3.13.0-123.172), linux-headers-3.13.0-123-generic:amd64 (3.13.0-123.172), linux-headers-3.13.0-123:amd64 (3.13.0-123.172)
End-Date: 2017-08-07 21:33:15
Start-Date: 2017-08-08 21:59:47
Commandline: apt-get install --reinstall xubuntu-desktop
Reinstall: xubuntu-desktop:amd64 (2.180)
End-Date: 2017-08-08 22:00:13
Start-Date: 2017-08-15 21:09:41
Commandline: apt-get remove --purge linux-headers-3.13.0-48
Purge: linux-headers-3.13.0-48:amd64 (3.13.0-48.80), linux-headers-3.13.0-48-generic:amd64 (3.13.0-48.80)
End-Date: 2017-08-15 21:10:21
Start-Date: 2017-08-15 21:18:09
Commandline: apt-get remove --purge linux-image-3.13.0-48-generic
Purge: linux-image-extra-3.13.0-48-generic:amd64 (3.13.0-48.80), linux-image-3.13.0-48-generic:amd64 (3.13.0-48.80)
End-Date: 2017-08-15 21:22:19
Start-Date: 2017-08-15 21:44:30
Commandline: apt-get remove --purge linux-headers-3.13.0-49
Purge: linux-headers-3.13.0-49-generic:amd64 (3.13.0-49.83), linux-headers-3.13.0-49:amd64 (3.13.0-49.83)
End-Date: 2017-08-15 21:45:00
Start-Date: 2017-08-15 22:18:49
Commandline: apt-get remove --purge linux-image-3.13.0-49-generic
Purge: linux-image-extra-3.13.0-49-generic:amd64 (3.13.0-49.83), linux-image-3.13.0-49-generic:amd64 (3.13.0-49.83)
End-Date: 2017-08-15 22:21:54
Start-Date: 2017-08-15 22:27:24
Commandline: apt-get install --reinstall linux-headers-3.13.0-126 linux-image-3.13.0-126-generic
Reinstall: linux-image-3.13.0-126-generic:amd64 (3.13.0-126.175), linux-headers-3.13.0-126:amd64 (3.13.0-126.175)
End-Date: 2017-08-15 22:31:01
Start-Date: 2017-08-15 22:33:33
Commandline: apt-get install linux-generic
Install: linux-image-3.13.0-128-generic:amd64 (3.13.0-128.177, automatic), linux-image-extra-3.13.0-128-generic:amd64 (3.13.0-128.177, automatic), linux-headers-3.13.0-128:amd64 (3.13.0-128.177, automatic), linux-headers-3.13.0-128-generic:amd64 (3.13.0-128.177, automatic)
Upgrade: linux-headers-generic:amd64 (3.13.0.126.136, 3.13.0.128.137), linux-image-generic:amd64 (3.13.0.126.136, 3.13.0.128.137), linux-generic:amd64 (3.13.0.126.136, 3.13.0.128.137)
End-Date: 2017-08-15 22:40:32
Start-Date: 2017-08-16 07:31:10
Commandline: apt-get autoremove --purge
Purge: linux-image-3.13.0-125-generic:amd64 (3.13.0-125.174), linux-image-extra-3.13.0-125-generic:amd64 (3.13.0-125.174), linux-headers-3.13.0-125-generic:amd64 (3.13.0-125.174), linux-headers-3.13.0-125:amd64 (3.13.0-125.174)
End-Date: 2017-08-16 07:35:07
Start-Date: 2017-08-16 21:49:58
Commandline: apt-get install terminator
Install: python-vte:amd64 (0.28.2-5ubuntu1, automatic), python-pyorbit:amd64 (2.24.0-6ubuntu4, automatic), python-keybinder:amd64 (0.3.0-2, automatic), python-gnome2:amd64 (2.28.1+dfsg-1ubuntu2, automatic), terminator:amd64 (0.97-2)
End-Date: 2017-08-16 21:50:49
Start-Date: 2017-08-17 14:31:49
Commandline: apt-get install gpm
Install: gpm:amd64 (1.20.4-6.1)
End-Date: 2017-08-17 14:32:30
Start-Date: 2017-08-17 14:35:44
Commandline: apt-get autoremove --purge -y
Purge: linux-image-3.13.0-76-generic:amd64 (3.13.0-76.120), linux-image-extra-3.13.0-85-generic:amd64 (3.13.0-85.129), linux-headers-3.13.0-98-generic:amd64 (3.13.0-98.145), linux-image-3.13.0-85-generic:amd64 (3.13.0-85.129), linux-image-extra-3.13.0-65-generic:amd64 (3.13.0-65.106), linux-image-3.13.0-100-generic:amd64 (3.13.0-100.147), linux-headers-3.13.0-106-generic:amd64 (3.13.0-106.153), linux-image-3.13.0-65-generic:amd64 (3.13.0-65.106), linux-image-extra-3.13.0-74-generic:amd64 (3.13.0-74.118), linux-headers-3.13.0-58-generic:amd64 (3.13.0-58.97), linux-headers-3.13.0-87-generic:amd64 (3.13.0-87.133), linux-image-3.13.0-74-generic:amd64 (3.13.0-74.118), linux-image-extra-3.13.0-83-generic:amd64 (3.13.0-83.127), linux-image-extra-3.13.0-100-generic:amd64 (3.13.0-100.147), linux-headers-3.13.0-67-generic:amd64 (3.13.0-67.110), linux-headers-3.13.0-96-generic:amd64 (3.13.0-96.143), linux-image-3.13.0-83-generic:amd64 (3.13.0-83.127), linux-image-extra-3.13.0-63-generic:amd64 (3.13.0-63.103), linux-image-extra-3.13.0-92-generic:amd64 (3.13.0-92.139), linux-headers-3.13.0-76-generic:amd64 (3.13.0-76.120), linux-image-3.13.0-63-generic:amd64 (3.13.0-63.103), linux-image-3.13.0-92-generic:amd64 (3.13.0-92.139), linux-headers-3.13.0-85-generic:amd64 (3.13.0-85.129), linux-headers-3.13.0-65-generic:amd64 (3.13.0-65.106), linux-image-3.13.0-116-generic:amd64 (3.13.0-116.163), linux-image-extra-3.13.0-61-generic:amd64 (3.13.0-61.100), linux-headers-3.13.0-74-generic:amd64 (3.13.0-74.118), linux-image-3.13.0-61-generic:amd64 (3.13.0-61.100), linux-headers-3.13.0-83-generic:amd64 (3.13.0-83.127), linux-image-3.13.0-105-generic:amd64 (3.13.0-105.152), linux-image-extra-3.13.0-116-generic:amd64 (3.13.0-116.163), linux-headers-3.13.0-63-generic:amd64 (3.13.0-63.103), linux-headers-3.13.0-92-generic:amd64 (3.13.0-92.139), linux-image-extra-3.13.0-79-generic:amd64 (3.13.0-79.123), linux-image-3.13.0-79-generic:amd64 (3.13.0-79.123), linux-headers-3.13.0-100-generic:amd64 (3.13.0-100.147), linux-image-extra-3.13.0-59-generic:amd64 (3.13.0-59.98), linux-image-extra-3.13.0-88-generic:amd64 (3.13.0-88.135), linux-image-extra-3.13.0-105-generic:amd64 (3.13.0-105.152), linux-image-3.13.0-59-generic:amd64 (3.13.0-59.98), linux-image-3.13.0-88-generic:amd64 (3.13.0-88.135), linux-image-extra-3.13.0-68-generic:amd64 (3.13.0-68.111), linux-image-3.13.0-68-generic:amd64 (3.13.0-68.111), linux-headers-3.13.0-61-generic:amd64 (3.13.0-61.100), linux-image-extra-3.13.0-77-generic:amd64 (3.13.0-77.121), linux-image-3.13.0-112-generic:amd64 (3.13.0-112.159), linux-image-3.13.0-77-generic:amd64 (3.13.0-77.121), linux-image-extra-3.13.0-57-generic:amd64 (3.13.0-57.95), linux-image-extra-3.13.0-86-generic:amd64 (3.13.0-86.131), linux-image-3.13.0-57-generic:amd64 (3.13.0-57.95), linux-image-3.13.0-86-generic:amd64 (3.13.0-86.131), linux-image-extra-3.13.0-66-generic:amd64 (3.13.0-66.108), linux-image-3.13.0-101-generic:amd64 (3.13.0-101.148), linux-image-extra-3.13.0-95-generic:amd64 (3.13.0-95.142), linux-image-extra-3.13.0-112-generic:amd64 (3.13.0-112.159), linux-headers-3.13.0-79-generic:amd64 (3.13.0-79.123), linux-image-3.13.0-66-generic:amd64 (3.13.0-66.108), linux-image-3.13.0-95-generic:amd64 (3.13.0-95.142), linux-headers-3.13.0-59-generic:amd64 (3.13.0-59.98), linux-headers-3.13.0-116-generic:amd64 (3.13.0-116.163), linux-headers-3.13.0-88-generic:amd64 (3.13.0-88.135), linux-image-extra-3.13.0-55-generic:amd64 (3.13.0-55.94), linux-headers-3.13.0-51:amd64 (3.13.0-51.84), linux-headers-3.13.0-53:amd64 (3.13.0-53.89), linux-headers-3.13.0-55:amd64 (3.13.0-55.94), linux-headers-3.13.0-57:amd64 (3.13.0-57.95), linux-headers-3.13.0-58:amd64 (3.13.0-58.97), linux-headers-3.13.0-59:amd64 (3.13.0-59.98), linux-image-extra-3.13.0-101-generic:amd64 (3.13.0-101.148), linux-headers-3.13.0-68-generic:amd64 (3.13.0-68.111), linux-image-3.13.0-55-generic:amd64 (3.13.0-55.94), linux-headers-3.13.0-61:amd64 (3.13.0-61.100), linux-headers-3.13.0-62:amd64 (3.13.0-62.102), linux-headers-3.13.0-63:amd64 (3.13.0-63.103), linux-headers-3.13.0-65:amd64 (3.13.0-65.106), linux-headers-3.13.0-66:amd64 (3.13.0-66.108), linux-headers-3.13.0-67:amd64 (3.13.0-67.110), linux-headers-3.13.0-68:amd64 (3.13.0-68.111), linux-image-3.13.0-119-generic:amd64 (3.13.0-119.166), linux-headers-3.13.0-71:amd64 (3.13.0-71.114), linux-headers-3.13.0-73:amd64 (3.13.0-73.116), linux-headers-3.13.0-74:amd64 (3.13.0-74.118), linux-headers-3.13.0-76:amd64 (3.13.0-76.120), linux-headers-3.13.0-77:amd64 (3.13.0-77.121), linux-headers-3.13.0-79:amd64 (3.13.0-79.123), linux-headers-3.13.0-105-generic:amd64 (3.13.0-105.152), linux-headers-3.13.0-77-generic:amd64 (3.13.0-77.121), linux-headers-3.13.0-83:amd64 (3.13.0-83.127), linux-headers-3.13.0-85:amd64 (3.13.0-85.129), linux-headers-3.13.0-86:amd64 (3.13.0-86.131), linux-headers-3.13.0-87:amd64 (3.13.0-87.133), linux-headers-3.13.0-88:amd64 (3.13.0-88.135), linux-image-extra-3.13.0-73-generic:amd64 (3.13.0-73.116), linux-headers-3.13.0-57-generic:amd64 (3.13.0-57.95), linux-headers-3.13.0-91:amd64 (3.13.0-91.138), linux-headers-3.13.0-92:amd64 (3.13.0-92.139), linux-headers-3.13.0-95:amd64 (3.13.0-95.142), linux-headers-3.13.0-96:amd64 (3.13.0-96.143), linux-headers-3.13.0-86-generic:amd64 (3.13.0-86.131), linux-headers-3.13.0-98:amd64 (3.13.0-98.145), linux-image-3.13.0-73-generic:amd64 (3.13.0-73.116), linux-image-extra-3.13.0-53-generic:amd64 (3.13.0-53.89), linux-image-extra-3.13.0-119-generic:amd64 (3.13.0-119.166), linux-headers-3.13.0-66-generic:amd64 (3.13.0-66.108), linux-image-3.13.0-53-generic:amd64 (3.13.0-53.89), linux-headers-3.13.0-95-generic:amd64 (3.13.0-95.142), linux-image-extra-3.13.0-62-generic:amd64 (3.13.0-62.102), linux-image-extra-3.13.0-91-generic:amd64 (3.13.0-91.138), linux-image-3.13.0-62-generic:amd64 (3.13.0-62.102), linux-image-3.13.0-91-generic:amd64 (3.13.0-91.138), linux-image-extra-3.13.0-71-generic:amd64 (3.13.0-71.114), linux-headers-3.13.0-55-generic:amd64 (3.13.0-55.94), linux-headers-3.13.0-112-generic:amd64 (3.13.0-112.159), linux-image-3.13.0-71-generic:amd64 (3.13.0-71.114), linux-image-3.13.0-106-generic:amd64 (3.13.0-106.153), linux-image-extra-3.13.0-51-generic:amd64 (3.13.0-51.84), linux-image-3.13.0-51-generic:amd64 (3.13.0-51.84), linux-headers-3.13.0-101-generic:amd64 (3.13.0-101.148), linux-headers-3.13.0-73-generic:amd64 (3.13.0-73.116), linux-image-extra-3.13.0-106-generic:amd64 (3.13.0-106.153), linux-headers-3.13.0-53-generic:amd64 (3.13.0-53.89), linux-image-extra-3.13.0-98-generic:amd64 (3.13.0-98.145), linux-headers-3.13.0-62-generic:amd64 (3.13.0-62.102), linux-image-3.13.0-98-generic:amd64 (3.13.0-98.145), linux-headers-3.13.0-91-generic:amd64 (3.13.0-91.138), linux-headers-3.13.0-100:amd64 (3.13.0-100.147), linux-headers-3.13.0-101:amd64 (3.13.0-101.148), linux-headers-3.13.0-105:amd64 (3.13.0-105.152), linux-headers-3.13.0-106:amd64 (3.13.0-106.153), linux-headers-3.13.0-112:amd64 (3.13.0-112.159), linux-headers-3.13.0-119-generic:amd64 (3.13.0-119.166), linux-headers-3.13.0-116:amd64 (3.13.0-116.163), linux-headers-3.13.0-119:amd64 (3.13.0-119.166), linux-headers-3.13.0-71-generic:amd64 (3.13.0-71.114), linux-image-extra-3.13.0-58-generic:amd64 (3.13.0-58.97), linux-image-extra-3.13.0-87-generic:amd64 (3.13.0-87.133), linux-image-3.13.0-58-generic:amd64 (3.13.0-58.97), linux-headers-3.13.0-51-generic:amd64 (3.13.0-51.84), linux-image-3.13.0-87-generic:amd64 (3.13.0-87.133), linux-image-extra-3.13.0-67-generic:amd64 (3.13.0-67.110), linux-image-extra-3.13.0-96-generic:amd64 (3.13.0-96.143), linux-image-3.13.0-67-generic:amd64 (3.13.0-67.110), linux-image-3.13.0-96-generic:amd64 (3.13.0-96.143), linux-image-extra-3.13.0-76-generic:amd64 (3.13.0-76.120)
End-Date: 2017-08-17 16:14:29
= = = = = = = =
zless /var/log/apt/history.log.2.gz
Start-Date: 2017-07-08 17:09:36
Commandline: aptdaemon role='role-commit-packages' sender=':1.84'
Upgrade: python-samba:amd64 (4.3.11+dfsg-0ubuntu0.14.04.8, 4.3.11+dfsg-0ubuntu0.14.04.9), thunderbird-locale-en-us:amd64 (52.1.1+build1-0ubuntu0.14.04.1, 52.2.1+build1-0ubuntu0.14.04.1), thunderbird:amd64 (52.1.1+build1-0ubuntu0.14.04.1, 52.2.1+build1-0ubuntu0.14.04.1), samba:amd64 (4.3.11+dfsg-0ubuntu0.14.04.8, 4.3.11+dfsg-0ubuntu0.14.04.9), libpoppler-glib8:amd64 (0.24.5-2ubuntu4.4, 0.24.5-2ubuntu4.5), libpoppler44:amd64 (0.24.5-2ubuntu4.4, 0.24.5-2ubuntu4.5), samba-dsdb-modules:amd64 (4.3.11+dfsg-0ubuntu0.14.04.8, 4.3.11+dfsg-0ubuntu0.14.04.9), thunderbird-locale-en:amd64 (52.1.1+build1-0ubuntu0.14.04.1, 52.2.1+build1-0ubuntu0.14.04.1), thunderbird-locale-fr:amd64 (52.1.1+build1-0ubuntu0.14.04.1, 52.2.1+build1-0ubuntu0.14.04.1), samba-common-bin:amd64 (4.3.11+dfsg-0ubuntu0.14.04.8, 4.3.11+dfsg-0ubuntu0.14.04.9), libpoppler-qt4-4:amd64 (0.24.5-2ubuntu4.4, 0.24.5-2ubuntu4.5), samba-libs:amd64 (4.3.11+dfsg-0ubuntu0.14.04.8, 4.3.11+dfsg-0ubuntu0.14.04.9), smbclient:amd64 (4.3.11+dfsg-0ubuntu0.14.04.8, 4.3.11+dfsg-0ubuntu0.14.04.9), libwbclient0:amd64 (4.3.11+dfsg-0ubuntu0.14.04.8, 4.3.11+dfsg-0ubuntu0.14.04.9), samba-vfs-modules:amd64 (4.3.11+dfsg-0ubuntu0.14.04.8, 4.3.11+dfsg-0ubuntu0.14.04.9), poppler-utils:amd64 (0.24.5-2ubuntu4.4, 0.24.5-2ubuntu4.5), samba-common:amd64 (4.3.11+dfsg-0ubuntu0.14.04.8, 4.3.11+dfsg-0ubuntu0.14.04.9), libsmbclient:amd64 (4.3.11+dfsg-0ubuntu0.14.04.8, 4.3.11+dfsg-0ubuntu0.14.04.9), thunderbird-locale-en-gb:amd64 (52.1.1+build1-0ubuntu0.14.04.1, 52.2.1+build1-0ubuntu0.14.04.1), ntpdate:amd64 (4.2.6.p5+dfsg-3ubuntu2.14.04.10, 4.2.6.p5+dfsg-3ubuntu2.14.04.11)
End-Date: 2017-07-08 17:12:17
Start-Date: 2017-07-09 17:59:25
Commandline: aptdaemon role='role-commit-packages' sender=':1.299'
Install: curl:amd64 (7.35.0-1ubuntu2.10, automatic), kino:amd64 (1.3.4-1.4)
End-Date: 2017-07-09 18:01:56
Start-Date: 2017-07-09 18:07:48
Commandline: aptdaemon role='role-commit-packages' sender=':1.304'
Install: mediainfo-gui:amd64 (0.7.67-1), libmediainfo0:amd64 (0.7.67-2ubuntu1, automatic), libzen0:amd64 (0.4.29-1, automatic), libtinyxml2-0.0.0:amd64 (0~git20120518.1.a2ae54e-1, automatic), libmms0:amd64 (0.6.2-3ubuntu2.1, automatic)
End-Date: 2017-07-09 18:10:35
Start-Date: 2017-07-13 21:49:28
Commandline: aptdaemon role='role-commit-packages' sender=':1.91'
Upgrade: vlc-plugin-notify:amd64 (2.1.6-0ubuntu14.04.2, 2.1.6-0ubuntu14.04.3), libvlccore7:amd64 (2.1.6-0ubuntu14.04.2, 2.1.6-0ubuntu14.04.3), vlc-nox:amd64 (2.1.6-0ubuntu14.04.2, 2.1.6-0ubuntu14.04.3), evince-common:amd64 (3.10.3-0ubuntu10.2, 3.10.3-0ubuntu10.3), vlc-data:amd64 (2.1.6-0ubuntu14.04.2, 2.1.6-0ubuntu14.04.3), libevview3-3:amd64 (3.10.3-0ubuntu10.2, 3.10.3-0ubuntu10.3), vlc:amd64 (2.1.6-0ubuntu14.04.2, 2.1.6-0ubuntu14.04.3), libvlc5:amd64 (2.1.6-0ubuntu14.04.2, 2.1.6-0ubuntu14.04.3), libevdocument3-4:amd64 (3.10.3-0ubuntu10.2, 3.10.3-0ubuntu10.3), vlc-plugin-pulse:amd64 (2.1.6-0ubuntu14.04.2, 2.1.6-0ubuntu14.04.3)
End-Date: 2017-07-13 21:50:33A+
Hors ligne
#75 Le 08/09/2017, à 13:51
- moko138
Re : [ABANDON] bloqué sur la page d'accès au compte utilisateur
Bon !
df -Ti est aussi nickel que df -Th : une cause possible d'éliminée.
- -
Puisque ton windows démarre,
tu peux - si tu le souhaites - te passer de clef usb et rediriger les commandes vers la partition ntfs (automatiquement montée par ton fstab provisoire) /mnt/79EC7D3D53F9F6C2. Soit :
ma-commande >> /mnt/79EC7D3D53F9F6C2/mon-fichier.txtou encore :
cd /mnt/79EC7D3D53F9F6C2 && ma-commande >> mon-fichier.txt(doubler le "&" est important.)
De même, tu peux y coller d'abord un mémo depuis windows.
Pour identifier cette partition depuis win, c'est celle d'environ 136 Go (127 Gio) remplie à 24%. Et bien sûr d'uuid 79EC7D3D53F9F6C2.
- -
Pour
cat /etc/group |grep -E "112|gvfs" utempter:x:112:
Je suis surpris par "utempter".
Mais comme là, je ne suis pas sur une 14.04, je ne peux pas comparer avec mon système pour l'instant.
- -
Les retours de sudo rm -Rvi /media/nad sont parfaits.
Je concentrerai dans le message suivant les retours propres au graphique, car nous allons recevoir l'aide d'un spécialiste.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne