Ubuntu-fr

abelthorne

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Supprime foomatic-filters :

sudo apt-get remove --purge foomatic-filters

et réinstalle hplip :

sudo apt-get install --reinstall hplip

Là, sur ta session normale, quand tu lances Simple Scan (pas en admin) et que tu vas dans ses préférences, le scanner est détecté ou plus du tout ?

Dernière modification par abelthorne (Le 27/08/2017, à 23:39)

julien_sen

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Il n'est plus du tout détecté.

abelthorne

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Ah. Les paquets Brother sont toujours en place ?

dpkg -l | grep Brother

Que donnent les commandes suivantes ?

lsusb
sane-find-scanner

Dernière modification par abelthorne (Le 27/08/2017, à 23:48)

julien_sen

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Il semble que oui :

dpkg -l | grep Brother

ii  brdcp7045nlpr:i386                              2.0.2-1                                       i386         Brother DCP-7045N LPR driver
ii  brscan-skey                                     0.2.4-1                                       amd64        Brother Linux scanner S-KEY tool
ii  brscan3                                         0.2.13-1                                      amd64        Brother Scanner Driver
ii  cupswrapperdcp7045n:i386                        2.0.2-1                                       i386         Brother DCP7045N CUPS wrapper driver
ii  printer-driver-brlaser                          3-5                                           amd64        printer driver for (some) Brother laser printers
ii  printer-driver-ptouch                           1.4.2-2                                       amd64        printer driver Brother P-touch label printers

lsusb

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f2:b469 Chicony Electronics Co., Ltd 
Bus 001 Device 009: ID 04f9:01e8 Brother Industries, Ltd 
Bus 001 Device 006: ID 04ca:300b Lite-On Technology Corp. Atheros AR3012 Bluetooth
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 008: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x1d6b/0x0003 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x04f2/0xb469 at 001:003: Access denied (insufficient permissions)
found USB scanner (vendor=0x04f9, product=0x01e8) at libusb:001:009
could not open USB device 0x04ca/0x300b at 001:006: Access denied (insufficient permissions)
could not open USB device 0x05e3/0x0608 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x046d/0xc077 at 001:008: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.

abelthorne

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Il est pourtant bien détecté. Tu me donneras le retour de :

scanimage -L

(Et pour la suite, on verra demain.)

julien_sen

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

scanimage -L

Erreur de segmentation (core dumped)

abelthorne

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Essaie de réinstaller ces deux paquets :

sudo apt-get install --reinstall sane sane-utils

Est-ce que la précédente commande fonctionne mieux ?

julien_sen

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

C'est le même retour.

abelthorne

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Je ne vois pas ce qui peut provoquer ça, on a normalement réinstallé les paquets qui avaient été supprimés. Essaie de réinstaller en vrac ceux que foomatic-filters avait enlevé mais il n'y en a pas qui sont directement liés au scanner et ils devraient être en place :

sudo apt-get install cups cups-filters hplip printer-driver-gutenprint printer-driver-hpcups printer-driver-postscript-hp

On va revérifier aussi ceux qui sont dans un état incohérent et libusb :

dpkg -l | grep "rc "
dpkg -l | grep "iU "
dpkg -l | grep libusb

Dernière modification par abelthorne (Le 28/08/2017, à 22:25)

julien_sen

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Pour la réinstallation, il indique :

0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.

Pour la suite, le deuxième retour est vide :

dpkg -l | grep "rc "

rc  shotwell                                        0.22.0+git20160108.r1.f2fb1f7-0ubuntu3        amd64        digital photo organizer
rc  thunderbird                                     1:52.2.1+build1-0ubuntu0.17.04.1              amd64        Email, RSS and newsgroup client with integrated spam filter
rc  transmission-gtk                                2.92-2ubuntu1                                 amd64        lightweight BitTorrent client (GTK+ interface)

dpkg -l | grep "iU "

dpkg -l | grep libusb

ii  libgusb2:amd64                                  0.2.9-1                                       amd64        GLib wrapper around libusb1
ii  libusb-0.1-4:i386                               2:0.1.12-30                                   i386         userspace USB programming library
ii  libusb-1.0-0:amd64                              2:1.0.21-1                                    amd64        userspace USB programming library
ii  libusb-1.0-0:i386                               2:1.0.21-1                                    i386         userspace USB programming library
ii  libusbmuxd4:amd64                               1.0.10-3                                      amd64        USB multiplexor daemon for iPhone and iPod Touch devices - library

abelthorne

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Ah, libusb-0.1-4 a sauté (il reste juste la version 32 bits). Réinstalle-la :

sudo apt-get install libusb-0.1-4

Retente ensuite :

scanimage -L

julien_sen

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

scanimage -L

device `brother3:bus2;dev1' is a Brother DCP-7045N USB scanner

abelthorne

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Ah, ça me rassure.

Bon, j'imagine qu'on est revenu à la situation initiale : si tu lances Simple Scan, tu ne peux toujours pas scanner ?

julien_sen

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Effectivement. En mode admin non plus...

abelthorne

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Donne-moi le retour de :

ls /usr/lib64/sane /usr/lib/sane

julien_sen

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

ls /usr/lib64/sane /usr/lib/sane

/usr/lib64/sane:
libsane-brother3.so  libsane-brother3.so.1  libsane-brother3.so.1.0.7

/usr/lib/sane:
libsane-brother3.so  libsane-brother3.so.1  libsane-brother3.so.1.0.7

abelthorne

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Ah. Je m'attendais à ce qu'il y ait plus de fichiers que ça dans le premier dossier.

Dans un terminal, lance cette commande :

export SANE_DEBUG_DLL=128

ensuite, redonne-moi à nouveau le retour de :

scanimage -L

La première commande règle une variable qui active le mode debug de Sane et on aura plus d'infos sur ce qu'il se passe avec scanimage.

julien_sen

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

scanimage -L

[sanei_debug] Setting debug level of dll to 128.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.25git
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras
[dll] sane_init/read_config: reading dll.d/libsane-extras
[dll] add_backend: adding backend `ls5000'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `abaton'
[dll] add_backend: adding backend `agfafocus'
[dll] add_backend: adding backend `apple'
[dll] add_backend: adding backend `avision'
[dll] add_backend: adding backend `artec'
[dll] add_backend: adding backend `artec_eplus48u'
[dll] add_backend: adding backend `as6e'
[dll] add_backend: adding backend `bh'
[dll] add_backend: adding backend `canon'
[dll] add_backend: adding backend `canon630u'
[dll] add_backend: adding backend `canon_dr'
[dll] add_backend: adding backend `cardscan'
[dll] add_backend: adding backend `coolscan'
[dll] add_backend: adding backend `coolscan3'
[dll] add_backend: adding backend `dell1600n_net'
[dll] add_backend: adding backend `dmc'
[dll] add_backend: adding backend `epjitsu'
[dll] add_backend: adding backend `epson2'
[dll] add_backend: adding backend `epsonds'
[dll] add_backend: adding backend `fujitsu'
[dll] add_backend: adding backend `genesys'
[dll] add_backend: adding backend `gt68xx'
[dll] add_backend: adding backend `hp'
[dll] add_backend: adding backend `hp3900'
[dll] add_backend: adding backend `hpsj5s'
[dll] add_backend: adding backend `hp3500'
[dll] add_backend: adding backend `hp4200'
[dll] add_backend: adding backend `hp5400'
[dll] add_backend: adding backend `hp5590'
[dll] add_backend: adding backend `hpljm1005'
[dll] add_backend: adding backend `hs2p'
[dll] add_backend: adding backend `ibm'
[dll] add_backend: adding backend `kodak'
[dll] add_backend: adding backend `kodakaio'
[dll] add_backend: adding backend `kvs1025'
[dll] add_backend: adding backend `kvs20xx'
[dll] add_backend: adding backend `leo'
[dll] add_backend: adding backend `lexmark'
[dll] add_backend: adding backend `ma1509'
[dll] add_backend: adding backend `magicolor'
[dll] add_backend: adding backend `matsushita'
[dll] add_backend: adding backend `microtek'
[dll] add_backend: adding backend `microtek2'
[dll] add_backend: adding backend `mustek'
[dll] add_backend: adding backend `mustek_usb'
[dll] add_backend: adding backend `mustek_usb2'
[dll] add_backend: adding backend `nec'
[dll] add_backend: adding backend `niash'
[dll] add_backend: adding backend `pie'
[dll] add_backend: adding backend `pixma'
[dll] add_backend: adding backend `plustek'
[dll] add_backend: adding backend `qcam'
[dll] add_backend: adding backend `ricoh'
[dll] add_backend: adding backend `rts8891'
[dll] add_backend: adding backend `s9036'
[dll] add_backend: adding backend `sceptre'
[dll] add_backend: adding backend `sharp'
[dll] add_backend: adding backend `sm3600'
[dll] add_backend: adding backend `sm3840'
[dll] add_backend: adding backend `snapscan'
[dll] add_backend: adding backend `sp15c'
[dll] add_backend: adding backend `tamarack'
[dll] add_backend: adding backend `teco1'
[dll] add_backend: adding backend `teco2'
[dll] add_backend: adding backend `teco3'
[dll] add_backend: adding backend `u12'
[dll] add_backend: adding backend `umax'
[dll] add_backend: adding backend `umax1220u'
[dll] add_backend: adding backend `v4l'
[dll] add_backend: adding backend `xerox_mfp'
[dll] add_backend: adding backend `brother3'
[dll] sane_get_devices
[dll] load: searching backend `brother3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-brother3.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-brother3.so.1'
[dll] init: initializing backend `brother3'
[dll] init: backend `brother3' is version 1.0.1
[dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[dll] init: initializing backend `xerox_mfp'
[dll] init: backend `xerox_mfp' is version 1.0.13
[dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
[dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1'
[dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory)
[dll] load: couldn't find backend `v4l' (No such file or directory)
[dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[dll] init: initializing backend `umax1220u'
[dll] init: backend `umax1220u' is version 1.0.2
[dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[dll] init: initializing backend `umax'
[dll] init: backend `umax' is version 1.0.45
[dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[dll] init: initializing backend `u12'
[dll] init: backend `u12' is version 1.0.0
[dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[dll] init: initializing backend `teco3'
[dll] init: backend `teco3' is version 1.0.1
[dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[dll] init: initializing backend `teco2'
[dll] init: backend `teco2' is version 1.0.10
[dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[dll] init: initializing backend `teco1'
[dll] init: backend `teco1' is version 1.0.10
[dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[dll] init: initializing backend `tamarack'
[dll] init: backend `tamarack' is version 1.0.0
[dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[dll] init: initializing backend `sp15c'
[dll] init: backend `sp15c' is version 1.0.0
[dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[dll] init: initializing backend `snapscan'
[dll] init: backend `snapscan' is version 1.4.53
[dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[dll] init: initializing backend `sm3840'
[dll] init: backend `sm3840' is version 1.0.0
[dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[dll] init: initializing backend `sm3600'
[dll] init: backend `sm3600' is version 1.0.6
[dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[dll] init: initializing backend `sharp'
[dll] init: backend `sharp' is version 1.0.0
[dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[dll] init: initializing backend `sceptre'
[dll] init: backend `sceptre' is version 1.0.10
[dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[dll] init: initializing backend `s9036'
[dll] init: backend `s9036' is version 1.0.0
[dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[dll] init: initializing backend `rts8891'
[dll] init: backend `rts8891' is version 1.0.2401
[dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[dll] init: initializing backend `ricoh'
[dll] init: backend `ricoh' is version 1.0.0
[dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[dll] init: initializing backend `qcam'
[dll] init: backend `qcam' is version 1.0.0
[dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[dll] init: initializing backend `plustek'
[dll] init: backend `plustek' is version 1.0.0
[dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[dll] init: initializing backend `pixma'
[dll] init: backend `pixma' is version 1.0.17
[dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[dll] init: initializing backend `pie'
[dll] init: backend `pie' is version 1.0.9
[dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[dll] init: initializing backend `niash'
[dll] init: backend `niash' is version 1.0.1
[dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[dll] init: initializing backend `nec'
[dll] init: backend `nec' is version 1.0.0
[dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] init: initializing backend `mustek_usb2'
[dll] init: backend `mustek_usb2' is version 1.0.10
[dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] init: initializing backend `mustek_usb'
[dll] init: backend `mustek_usb' is version 1.0.18
[dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[dll] init: initializing backend `mustek'
[dll] init: backend `mustek' is version 1.0.138
[dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[dll] init: initializing backend `microtek2'
[dll] init: backend `microtek2' is version 1.0.0
[dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[dll] init: initializing backend `microtek'
[dll] init: backend `microtek' is version 1.0.0
[dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[dll] init: initializing backend `matsushita'
[dll] init: backend `matsushita' is version 1.0.7
[dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[dll] init: initializing backend `magicolor'
[dll] init: backend `magicolor' is version 1.0.1
[dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[dll] init: initializing backend `ma1509'
[dll] init: backend `ma1509' is version 1.0.3
[dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[dll] init: initializing backend `lexmark'
[dll] init: backend `lexmark' is version 1.0.32
[dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[dll] init: initializing backend `leo'
[dll] init: backend `leo' is version 1.0.11
[dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] init: initializing backend `kvs20xx'
[dll] init: backend `kvs20xx' is version 1.0.2
[dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] init: initializing backend `kvs1025'
[dll] init: backend `kvs1025' is version 1.0.5
[dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] init: initializing backend `kodakaio'
[dll] init: backend `kodakaio' is version 1.0.2
[dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[dll] init: initializing backend `kodak'
[dll] init: backend `kodak' is version 1.0.7
[dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[dll] init: initializing backend `ibm'
[dll] init: backend `ibm' is version 1.0.0
[dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[dll] init: initializing backend `hs2p'
[dll] init: backend `hs2p' is version 1.0.0
[dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] init: initializing backend `hpljm1005'
[dll] init: backend `hpljm1005' is version 1.0.1
[dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[dll] init: initializing backend `hp5590'
[dll] init: backend `hp5590' is version 1.0.7
[dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[dll] init: initializing backend `hp5400'
[dll] init: backend `hp5400' is version 1.0.3
[dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[dll] init: initializing backend `hp4200'
[dll] init: backend `hp4200' is version 1.0.0
[dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[dll] init: initializing backend `hp3500'
[dll] init: backend `hp3500' is version 1.0.0
[dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] init: initializing backend `hpsj5s'
[dll] init: backend `hpsj5s' is version 1.0.3
[dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[dll] init: initializing backend `hp3900'
[dll] init: backend `hp3900' is version 1.0.0
[dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[dll] init: initializing backend `hp'
[dll] init: backend `hp' is version 1.0.8
[dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] init: initializing backend `gt68xx'
[dll] init: backend `gt68xx' is version 1.0.84
[dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[dll] init: initializing backend `genesys'
[dll] init: backend `genesys' is version 1.0.2506
[dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] init: initializing backend `fujitsu'
[dll] init: backend `fujitsu' is version 1.0.126
[dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[dll] init: initializing backend `epsonds'
[dll] init: backend `epsonds' is version 1.0.35
[dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[dll] init: initializing backend `epson2'
[dll] init: backend `epson2' is version 1.0.124
[dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] init: initializing backend `epjitsu'
[dll] init: backend `epjitsu' is version 1.0.28
[dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[dll] init: initializing backend `dmc'
[dll] init: backend `dmc' is version 1.0.0
[dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] init: initializing backend `dell1600n_net'
[dll] init: backend `dell1600n_net' is version 1.0.0
[dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] init: initializing backend `coolscan3'
[dll] init: backend `coolscan3' is version 1.0.0
[dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[dll] init: initializing backend `coolscan'
[dll] init: backend `coolscan' is version 1.0.0
[dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[dll] init: initializing backend `cardscan'
[dll] init: backend `cardscan' is version 1.0.2
[dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] init: initializing backend `canon_dr'
[dll] init: backend `canon_dr' is version 1.0.49
[dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[dll] init: initializing backend `canon630u'
[dll] init: backend `canon630u' is version 1.0.1
[dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[dll] init: initializing backend `canon'
[dll] init: backend `canon' is version 1.0.0
[dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[dll] init: initializing backend `bh'
[dll] init: backend `bh' is version 1.0.4
[dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[dll] init: initializing backend `as6e'
[dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] init: initializing backend `artec_eplus48u'
[dll] init: backend `artec_eplus48u' is version 1.0.0
[dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[dll] init: initializing backend `artec'
[dll] init: backend `artec' is version 1.0.0
[dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[dll] init: initializing backend `avision'
[dll] init: backend `avision' is version 1.0.297
[dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[dll] init: initializing backend `apple'
[dll] init: backend `apple' is version 1.0.0
[dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] init: initializing backend `agfafocus'
[dll] init: backend `agfafocus' is version 1.0.0
[dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[dll] init: initializing backend `abaton'
[dll] init: backend `abaton' is version 1.0.0
[dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[dll] init: initializing backend `net'
[dll] init: backend `net' is version 1.0.25
[dll] load: searching backend `ls5000' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1'
[dll] init: initializing backend `ls5000'
[dll] init: backend `ls5000' is version 1.0.0
[dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.0
[dll] sane_get_devices: found 1 devices
device `brother3:bus2;dev1' is a Brother DCP-7045N USB scanner
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `brother3's exit function
[dll] sane_exit: calling backend `xerox_mfp's exit function
[dll] sane_exit: calling backend `umax1220u's exit function
[dll] sane_exit: calling backend `umax's exit function
[dll] sane_exit: calling backend `u12's exit function
[dll] sane_exit: calling backend `teco3's exit function
[dll] sane_exit: calling backend `teco2's exit function
[dll] sane_exit: calling backend `teco1's exit function
[dll] sane_exit: calling backend `tamarack's exit function
[dll] sane_exit: calling backend `sp15c's exit function
[dll] sane_exit: calling backend `snapscan's exit function
[dll] sane_exit: calling backend `sm3840's exit function
[dll] sane_exit: calling backend `sm3600's exit function
[dll] sane_exit: calling backend `sharp's exit function
[dll] sane_exit: calling backend `sceptre's exit function
[dll] sane_exit: calling backend `s9036's exit function
[dll] sane_exit: calling backend `rts8891's exit function
[dll] sane_exit: calling backend `ricoh's exit function
[dll] sane_exit: calling backend `qcam's exit function
[dll] sane_exit: calling backend `plustek's exit function
[dll] sane_exit: calling backend `pixma's exit function
[dll] sane_exit: calling backend `pie's exit function
[dll] sane_exit: calling backend `niash's exit function
[dll] sane_exit: calling backend `nec's exit function
[dll] sane_exit: calling backend `mustek_usb2's exit function
[dll] sane_exit: calling backend `mustek_usb's exit function
[dll] sane_exit: calling backend `mustek's exit function
[dll] sane_exit: calling backend `microtek2's exit function
[dll] sane_exit: calling backend `microtek's exit function
[dll] sane_exit: calling backend `matsushita's exit function
[dll] sane_exit: calling backend `magicolor's exit function
[dll] sane_exit: calling backend `ma1509's exit function
[dll] sane_exit: calling backend `lexmark's exit function
[dll] sane_exit: calling backend `leo's exit function
[dll] sane_exit: calling backend `kvs20xx's exit function
[dll] sane_exit: calling backend `kvs1025's exit function
[dll] sane_exit: calling backend `kodakaio's exit function
[dll] sane_exit: calling backend `kodak's exit function
[dll] sane_exit: calling backend `ibm's exit function
[dll] sane_exit: calling backend `hs2p's exit function
[dll] sane_exit: calling backend `hpljm1005's exit function
[dll] sane_exit: calling backend `hp5590's exit function
[dll] sane_exit: calling backend `hp5400's exit function
[dll] sane_exit: calling backend `hp4200's exit function
[dll] sane_exit: calling backend `hp3500's exit function
[dll] sane_exit: calling backend `hpsj5s's exit function
[dll] sane_exit: calling backend `hp3900's exit function
[dll] sane_exit: calling backend `hp's exit function
[dll] sane_exit: calling backend `gt68xx's exit function
[dll] sane_exit: calling backend `genesys's exit function
[dll] sane_exit: calling backend `fujitsu's exit function
[dll] sane_exit: calling backend `epsonds's exit function
[dll] sane_exit: calling backend `epson2's exit function
[dll] sane_exit: calling backend `epjitsu's exit function
[dll] sane_exit: calling backend `dmc's exit function
[dll] sane_exit: calling backend `dell1600n_net's exit function
[dll] sane_exit: calling backend `coolscan3's exit function
[dll] sane_exit: calling backend `coolscan's exit function
[dll] sane_exit: calling backend `cardscan's exit function
[dll] sane_exit: calling backend `canon_dr's exit function
[dll] sane_exit: calling backend `canon630u's exit function
[dll] sane_exit: calling backend `canon's exit function
[dll] sane_exit: calling backend `bh's exit function
[dll] sane_exit: calling backend `artec_eplus48u's exit function
[dll] sane_exit: calling backend `artec's exit function
[dll] sane_exit: calling backend `avision's exit function
[dll] sane_exit: calling backend `apple's exit function
[dll] sane_exit: calling backend `agfafocus's exit function
[dll] sane_exit: calling backend `abaton's exit function
[dll] sane_exit: calling backend `net's exit function
[dll] sane_exit: calling backend `ls5000's exit function
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished

abelthorne

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Donne-moi le retour de :

ls /usr/lib/x86_64-linux-gnu/sane

julien_sen

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

ls /usr/lib/x86_64-linux-gnu/sane

libsane-abaton.la                 libsane-epjitsu.so.1         libsane-kvs20xx.so.1           libsane-qcam.la
libsane-abaton.so.1               libsane-epjitsu.so.1.0.25    libsane-kvs20xx.so.1.0.25      libsane-qcam.so.1
libsane-abaton.so.1.0.25          libsane-epson2.la            libsane-kvs40xx.la             libsane-qcam.so.1.0.25
libsane-agfafocus.la              libsane-epson2.so.1          libsane-kvs40xx.so.1           libsane-ricoh.la
libsane-agfafocus.so.1            libsane-epson2.so.1.0.25     libsane-kvs40xx.so.1.0.25      libsane-ricoh.so.1
libsane-agfafocus.so.1.0.25       libsane-epsonds.la           libsane-leo.la                 libsane-ricoh.so.1.0.25
libsane-apple.la                  libsane-epsonds.so.1         libsane-leo.so.1               libsane-rts8891.la
libsane-apple.so.1                libsane-epsonds.so.1.0.25    libsane-leo.so.1.0.25          libsane-rts8891.so.1
libsane-apple.so.1.0.25           libsane-epson.la             libsane-lexmark.la             libsane-rts8891.so.1.0.25
libsane-artec_eplus48u.la         libsane-epson.so.1           libsane-lexmark.so.1           libsane-s9036.la
libsane-artec_eplus48u.so.1       libsane-epson.so.1.0.25      libsane-lexmark.so.1.0.25      libsane-s9036.so.1
libsane-artec_eplus48u.so.1.0.25  libsane-fujitsu.la           libsane-ls5000.so.1            libsane-s9036.so.1.0.25
libsane-artec.la                  libsane-fujitsu.so.1         libsane-ls5000.so.1.0.22       libsane-sceptre.la
libsane-artec.so.1                libsane-fujitsu.so.1.0.25    libsane-ma1509.la              libsane-sceptre.so.1
libsane-artec.so.1.0.25           libsane-genesys.la           libsane-ma1509.so.1            libsane-sceptre.so.1.0.25
libsane-as6e.la                   libsane-genesys.so.1         libsane-ma1509.so.1.0.25       libsane-sharp.la
libsane-as6e.so.1                 libsane-genesys.so.1.0.25    libsane-magicolor.la           libsane-sharp.so.1
libsane-as6e.so.1.0.25            libsane-geniusvp2.so.1       libsane-magicolor.so.1         libsane-sharp.so.1.0.25
libsane-avision.la                libsane-geniusvp2.so.1.0.22  libsane-magicolor.so.1.0.25    libsane-sm3600.la
libsane-avision.so.1              libsane-gphoto2.la           libsane-matsushita.la          libsane-sm3600.so.1
libsane-avision.so.1.0.25         libsane-gphoto2.so.1         libsane-matsushita.so.1        libsane-sm3600.so.1.0.25
libsane-bh.la                     libsane-gphoto2.so.1.0.25    libsane-matsushita.so.1.0.25   libsane-sm3840.la
libsane-bh.so.1                   libsane-gt68xx.la            libsane-microtek2.la           libsane-sm3840.so.1
libsane-bh.so.1.0.25              libsane-gt68xx.so.1          libsane-microtek2.so.1         libsane-sm3840.so.1.0.25
libsane-brother3.so               libsane-gt68xx.so.1.0.25     libsane-microtek2.so.1.0.25    libsane-snapscan.la
libsane-brother3.so.1             libsane-hp3500.la            libsane-microtek.la            libsane-snapscan.so.1
libsane-brother3.so.1.0.7         libsane-hp3500.so.1          libsane-microtek.so.1          libsane-snapscan.so.1.0.25
libsane-canon630u.la              libsane-hp3500.so.1.0.25     libsane-microtek.so.1.0.25     libsane-sp15c.la
libsane-canon630u.so.1            libsane-hp3900.la            libsane-mustek.la              libsane-sp15c.so.1
libsane-canon630u.so.1.0.25       libsane-hp3900.so.1          libsane-mustek_pp.la           libsane-sp15c.so.1.0.25
libsane-canon_dr.la               libsane-hp3900.so.1.0.25     libsane-mustek_pp.so.1         libsane-st400.la
libsane-canon_dr.so.1             libsane-hp4200.la            libsane-mustek_pp.so.1.0.25    libsane-st400.so.1
libsane-canon_dr.so.1.0.25        libsane-hp4200.so.1          libsane-mustek.so.1            libsane-st400.so.1.0.25
libsane-canon.la                  libsane-hp4200.so.1.0.25     libsane-mustek.so.1.0.25       libsane-stv680.la
libsane-canon_pp.la               libsane-hp5400.la            libsane-mustek_usb2.la         libsane-stv680.so.1
libsane-canon_pp.so.1             libsane-hp5400.so.1          libsane-mustek_usb2.so.1       libsane-stv680.so.1.0.25
libsane-canon_pp.so.1.0.25        libsane-hp5400.so.1.0.25     libsane-mustek_usb2.so.1.0.25  libsane-tamarack.la
libsane-canon.so.1                libsane-hp5590.la            libsane-mustek_usb.la          libsane-tamarack.so.1
libsane-canon.so.1.0.25           libsane-hp5590.so.1          libsane-mustek_usb.so.1        libsane-tamarack.so.1.0.25
libsane-cardscan.la               libsane-hp5590.so.1.0.25     libsane-mustek_usb.so.1.0.25   libsane-teco1.la
libsane-cardscan.so.1             libsane-hpaio.so.1           libsane-nec.la                 libsane-teco1.so.1
libsane-cardscan.so.1.0.25        libsane-hpaio.so.1.0.0       libsane-nec.so.1               libsane-teco1.so.1.0.25
libsane-coolscan2.la              libsane-hp.la                libsane-nec.so.1.0.25          libsane-teco2.la
libsane-coolscan2.so.1            libsane-hpljm1005.la         libsane-net.la                 libsane-teco2.so.1
libsane-coolscan2.so.1.0.25       libsane-hpljm1005.so.1       libsane-net.so.1               libsane-teco2.so.1.0.25
libsane-coolscan3.la              libsane-hpljm1005.so.1.0.25  libsane-net.so.1.0.25          libsane-teco3.la
libsane-coolscan3.so.1            libsane-hpsj5s.la            libsane-niash.la               libsane-teco3.so.1
libsane-coolscan3.so.1.0.25       libsane-hpsj5s.so.1          libsane-niash.so.1             libsane-teco3.so.1.0.25
libsane-coolscan.la               libsane-hpsj5s.so.1.0.25     libsane-niash.so.1.0.25        libsane-test.la
libsane-coolscan.so.1             libsane-hp.so.1              libsane-p5.la                  libsane-test.so.1
libsane-coolscan.so.1.0.25        libsane-hp.so.1.0.25         libsane-p5.so.1                libsane-test.so.1.0.25
libsane-dc210.la                  libsane-hs2p.la              libsane-p5.so.1.0.25           libsane-u12.la
libsane-dc210.so.1                libsane-hs2p.so.1            libsane-pie.la                 libsane-u12.so.1
libsane-dc210.so.1.0.25           libsane-hs2p.so.1.0.25       libsane-pie.so.1               libsane-u12.so.1.0.25
libsane-dc240.la                  libsane-ibm.la               libsane-pie.so.1.0.25          libsane-umax1220u.la
libsane-dc240.so.1                libsane-ibm.so.1             libsane-pixma.la               libsane-umax1220u.so.1
libsane-dc240.so.1.0.25           libsane-ibm.so.1.0.25        libsane-pixma.so.1             libsane-umax1220u.so.1.0.25
libsane-dc25.la                   libsane-kodakaio.la          libsane-pixma.so.1.0.25        libsane-umax.la
libsane-dc25.so.1                 libsane-kodakaio.so.1        libsane-plustek.la             libsane-umax_pp.la
libsane-dc25.so.1.0.25            libsane-kodakaio.so.1.0.25   libsane-plustek_pp.la          libsane-umax_pp.so.1
libsane-dell1600n_net.la          libsane-kodak.la             libsane-plustek_pp.so.1        libsane-umax_pp.so.1.0.25
libsane-dell1600n_net.so.1        libsane-kodak.so.1           libsane-plustek_pp.so.1.0.25   libsane-umax.so.1
libsane-dell1600n_net.so.1.0.25   libsane-kodak.so.1.0.25      libsane-plustek.so.1           libsane-umax.so.1.0.25
libsane-dmc.la                    libsane-kvs1025.la           libsane-plustek.so.1.0.25      libsane-xerox_mfp.la
libsane-dmc.so.1                  libsane-kvs1025.so.1         libsane-pnm.la                 libsane-xerox_mfp.so.1
libsane-dmc.so.1.0.25             libsane-kvs1025.so.1.0.25    libsane-pnm.so.1               libsane-xerox_mfp.so.1.0.25
libsane-epjitsu.la                libsane-kvs20xx.la           libsane-pnm.so.1.0.25

abelthorne

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Tout est en place et scanimage n'indique aucun problème...

Tu peux me rappeler le message d'erreur que tu as quand tu essaies de scanner avec Simple Scan ?

julien_sen

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

"Échec de la numérisation. Impossible de se connecter au périphérique de numérisation."

julien_sen

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

Sinon, est-il possible de scanner en Wi-Fi ? Auquel cas, la question de l'USB serait "résolue". En espérant ne pas tomber sur pire !

abelthorne

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

C'est possible de scanner en wi-fi mais je ne te cache pas qu'il y a pas mal de monde qui a aussi des problèmes pour l'utilisation d'un scanner en wi-fi...

Avant, je voudrais vérifier une dernière chose. Je ne sais pas pourquoi tu as des versions 32 bits de libusb installées, essaie de les supprimer :

sudo apt-get remove --purge libusb-0.1-4:i386 libusb-1.0-0:i386

(Donne-moi le retour.)

julien_sen

Re : Imprimante-scanner Brother (DCP-7045N) ne fonctionne plus

sudo apt-get remove --purge libusb-0.1-4:i386 libusb-1.0-0:i386

Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  gir1.2-rb-3.0 gir1.2-secret-1 libavahi-client3:i386 libavahi-common-data:i386 libavahi-common3:i386 libdbus-1-3:i386 libdmapsharing-3.0-2
  libevent-2.0-5 libexif12:i386 libexpat1:i386 libfontconfig1:i386 libfreetype6:i386 libgd3:i386 libgexiv2-2 libgpod-common libgpod4 libicu57:i386
  libieee1284-3:i386 libjbig0:i386 libjpeg-turbo8:i386 libjpeg8:i386 libltdl7:i386 libnatpmp1 libpaps0 libpng16-16:i386 libqqwing2v5
  librhythmbox-core10 libsgutils2-2 libstdc++6:i386 libtiff5:i386 libwebp6:i386 libx11-6:i386 libxau6:i386 libxcb1:i386 libxdmcp6:i386 libxml2:i386
  libxpm4:i386 media-player-info paps python3-mako rhythmbox-data transmission-common
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
Les paquets suivants seront ENLEVÉS :
  libgphoto2-6:i386* libgphoto2-port12:i386* libsane:i386* libusb-0.1-4:i386* libusb-1.0-0:i386*
0 mis à jour, 0 nouvellement installés, 5 à enlever et 0 non mis à jour.
Après cette opération, 14,3 Mo d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] o
(Lecture de la base de données... 207385 fichiers et répertoires déjà installés.)
Suppression de libsane:i386 (1.0.25+git20150528-1ubuntu4) ...
Suppression de libgphoto2-6:i386 (2.5.12-1) ...
Suppression de libgphoto2-port12:i386 (2.5.12-1) ...
Suppression de libusb-0.1-4:i386 (2:0.1.12-30) ...
Suppression de libusb-1.0-0:i386 (2:1.0.21-1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.24-9ubuntu2.2) ...