#51 Le 23/07/2017, à 23:51
- Babdu89
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Désactiver le ou les OS_prober → en enlevant le droit d’exécution sur le fichier 30_os-prober sous 14.04 et kde-neon, du coup ? Je le laisse actif dans 16.04 ? Ou en modifiant grub.cfg alors qu'il y est écrit en grand
# # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub #
La recommandation de ne pas modifier manuellement le fichier grub.cfg est valable pour la simple raison, qu'il sera régénéré automatiquement à la prochaine mise à jour de grub de L'Os concerné.
Je proposais le test de modifier les grub.cfg , qu'à la condition d'en faire une sauvegarde avant, pour revenir en arrière en cas de souci. Car ce sera l'effet de la désactivation de /30-os-prober, après une maj de Grub des Os où il est désactivé, pour prise en compte de la manip.
Çà vide
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###des grub.cfg.
Et lorsque l'on fait une maj de Grub de l'Os par défaut au démarrage. Il n'y a plus multiplications des menuentry.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#52 Le 24/07/2017, à 00:09
- Babdu89
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
car l'intention c'est d'ajouter des o.s., donc de refaire des update-grub… Y-a-t-il un moyen à l'install' d'un nouvel o.s. de lui dire d'utiliser tel grub déjà existant ? Ou : dès son install' j'annule l’exécution de son OS_prober puis sudo update-grub puis redémarrage sous la 16.04 du quotidien et sudo update-grub là aussi ?
Y-a-t-il un moyen à l'install' d'un nouvel o.s. de lui dire d'utiliser tel grub déjà existant ?
Oui. Comme je l'ai dit, je ne sais plus quel post. (post#20).
On peut aussi installer Grub première partie des nouveaux Os dans le secteur de boot des partitions d'installation, au lieu de la mettre dans le secteur de boot du disque /sdb.
Exemple.
Tu remplaces l'Os en /sdb1par un autre.Tu installes en manuel dans /sdb1, en formatant, pour pouvoir indiquer de mettre Grub première partie dans /dev/sdb1
Et faire une mise à jour de Grub de l'Os par défaut au démarrage, pour voir la nouvelle installation au menu Grub.
Çà a comme avantage de pouvoir virer le nouvel Os de /sdb1 en formatant avec Gparted, pour encore en mettre un autre à sa place.
Et que ce soit pris en compte dans le Grub de la 16.04, en faisant une maj de Grub de la 16.04.
Tu chaînes d'un Grub (16.04) sur l'autre, celui de /sdb1, en fait.
Ou : dès son install' j'annule l’exécution de son OS_prober puis sudo update-grub puis redémarrage sous la 16.04 du quotidien et sudo update-grub là aussi ?
Et, pas Ou !!!
Est-ce que je commence à comprendre ?
Oui, oui, oui!!!.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#53 Le 24/07/2017, à 00:20
- Coeur Noir
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
edit : grillé, tu as déjà répondu à une partie des questions ci-après…
Boooon, enfin je progresse merci infiniment de votre patience…
Le boot-info fait désormais moins de 2000 lignes…
Boot Info Script cfd9efe + Boot-Repair extra info [Boot-Info 26Apr2016]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for /boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk search_fs_uuid
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
search.fs_uuid a7428baa-93fd-48e8-922d-637da9044d2f root hd1,msdos1
set prefix=($root)'/boot/grub'
---------------------------------------------------------------------------
=> Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Grub2 (v2.00) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for /boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk search_fs_uuid
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
search.fs_uuid a7428baa-93fd-48e8-922d-637da9044d2f root hd1,msdos1
set prefix=($root)'/boot/grub'
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.5 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sdb3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: KDE neon User Edition 5.10
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sdc1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdc5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 63 1,951,430,655 1,951,430,593 83 Linux
/dev/sda2 1,951,430,656 1,953,523,711 2,093,056 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 50,120,703 50,118,656 83 Linux
/dev/sdb2 50,120,704 106,761,328 56,640,625 83 Linux
/dev/sdb3 106,762,240 170,602,495 63,840,256 83 Linux
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 2,048 1,951,999,999 1,951,997,952 83 Linux
/dev/sdc2 1,952,002,046 1,953,523,711 1,521,666 5 Extended
/dev/sdc5 1,952,002,048 1,953,523,711 1,521,664 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 006891cb-73bf-49c9-ba36-6d13060aec73 ext4 BACKUP
/dev/sda2 c5688e8b-2efb-4565-9216-a2040130d951 ext4 LOGS
/dev/sdb1 a7428baa-93fd-48e8-922d-637da9044d2f ext4 Ubuntu14.04
/dev/sdb2 90a0f248-65ad-4247-b7ba-fb4e9f632905 ext4 Ubuntu16.04
/dev/sdb3 5f103eb1-ead4-496a-863c-2439c5f132a8 ext4 KDE-Neon
/dev/sdc1 b19322e6-8a6d-4e24-b87f-4b0155b41963 ext4 DATA
/dev/sdc5 22faac8b-34aa-4425-98a7-184d0613ccff swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jul 24 01:06 ata-ATAPI_iHAS124_Y -> ../../sr0
lrwxrwxrwx 1 root root 9 Jul 24 01:06 ata-Hitachi_HDS721010CLA332_JP6940HZ0U2JAF -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 24 01:06 ata-Hitachi_HDS721010CLA332_JP6940HZ0U2JAF-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 24 01:06 ata-Hitachi_HDS721010CLA332_JP6940HZ0U2JAF-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 Jul 24 01:06 ata-Samsung_SSD_840_EVO_120GB_S1D5NSADB89673F -> ../../sdb
lrwxrwxrwx 1 root root 10 Jul 24 01:06 ata-Samsung_SSD_840_EVO_120GB_S1D5NSADB89673F-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jul 24 01:06 ata-Samsung_SSD_840_EVO_120GB_S1D5NSADB89673F-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jul 24 01:06 ata-Samsung_SSD_840_EVO_120GB_S1D5NSADB89673F-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 9 Jul 24 01:06 ata-WDC_WD10EZEX-00BN5A0_WD-WCC3F0348707 -> ../../sdc
lrwxrwxrwx 1 root root 10 Jul 24 01:06 ata-WDC_WD10EZEX-00BN5A0_WD-WCC3F0348707-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 10 Jul 24 01:06 ata-WDC_WD10EZEX-00BN5A0_WD-WCC3F0348707-part2 -> ../../sdc2
lrwxrwxrwx 1 root root 10 Jul 24 01:06 ata-WDC_WD10EZEX-00BN5A0_WD-WCC3F0348707-part5 -> ../../sdc5
lrwxrwxrwx 1 root root 9 Jul 24 01:06 usb-Generic-_Multi-Card_20060413092100000-0:0 -> ../../sdd
lrwxrwxrwx 1 root root 9 Jul 24 01:06 wwn-0x5000cca375cb66c3 -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 24 01:06 wwn-0x5000cca375cb66c3-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 24 01:06 wwn-0x5000cca375cb66c3-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 Jul 24 01:06 wwn-0x50014ee20959e582 -> ../../sdc
lrwxrwxrwx 1 root root 10 Jul 24 01:06 wwn-0x50014ee20959e582-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 10 Jul 24 01:06 wwn-0x50014ee20959e582-part2 -> ../../sdc2
lrwxrwxrwx 1 root root 10 Jul 24 01:06 wwn-0x50014ee20959e582-part5 -> ../../sdc5
lrwxrwxrwx 1 root root 9 Jul 24 01:06 wwn-0x50025388a00e26fd -> ../../sdb
lrwxrwxrwx 1 root root 10 Jul 24 01:06 wwn-0x50025388a00e26fd-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jul 24 01:06 wwn-0x50025388a00e26fd-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jul 24 01:06 wwn-0x50025388a00e26fd-part3 -> ../../sdb3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /media/BACKUP ext4 (rw,relatime,data=ordered)
/dev/sda2 /var/log ext4 (rw,nosuid,nodev,noatime,data=ordered)
/dev/sdb2 / ext4 (rw,noatime,discard,errors=remount-ro,data=ordered)
/dev/sdc1 /home ext4 (rw,relatime,data=ordered)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="4"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-a7428baa-93fd-48e8-922d-637da9044d2f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
linux /boot/vmlinuz-4.4.0-83-generic root=UUID=a7428baa-93fd-48e8-922d-637da9044d2f ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-83-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'Ubuntu, avec Linux 4.4.0-83-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-83-generic-advanced-a7428baa-93fd-48e8-922d-637da9044d2f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
echo 'Chargement de Linux 4.4.0-83-generic…'
linux /boot/vmlinuz-4.4.0-83-generic root=UUID=a7428baa-93fd-48e8-922d-637da9044d2f ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-83-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-83-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-83-generic-recovery-a7428baa-93fd-48e8-922d-637da9044d2f' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
echo 'Chargement de Linux 4.4.0-83-generic…'
linux /boot/vmlinuz-4.4.0-83-generic root=UUID=a7428baa-93fd-48e8-922d-637da9044d2f ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-83-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 16.04.2 LTS (16.04) (sur /dev/sdb2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
linux /boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.10.0-27-generic
}
submenu 'Options avancées pour Ubuntu 16.04.2 LTS (16.04) (sur /dev/sdb2)' $menuentry_id_option 'osprober-gnulinux-advanced-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
menuentry 'Ubuntu (sur /dev/sdb2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.10.0-27-generic--90a0f248-65ad-4247-b7ba-fb4e9f632905' {
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
linux /boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.10.0-27-generic
}
menuentry 'Ubuntu, avec Linux 4.10.0-27-generic (sur /dev/sdb2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.10.0-27-generic--90a0f248-65ad-4247-b7ba-fb4e9f632905' {
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
linux /boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.10.0-27-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-27-generic (upstart) (sur /dev/sdb2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.10.0-27-generic--90a0f248-65ad-4247-b7ba-fb4e9f632905' {
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
linux /boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff init=/sbin/upstart
initrd /boot/initrd.img-4.10.0-27-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-27-generic (recovery mode) (sur /dev/sdb2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.10.0-27-generic-root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro recovery nomodeset-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
linux /boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro recovery nomodeset
initrd /boot/initrd.img-4.10.0-27-generic
}
menuentry 'Ubuntu, avec Linux 4.8.0-58-generic (sur /dev/sdb2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.8.0-58-generic--90a0f248-65ad-4247-b7ba-fb4e9f632905' {
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-58-generic (upstart) (sur /dev/sdb2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.8.0-58-generic--90a0f248-65ad-4247-b7ba-fb4e9f632905' {
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff init=/sbin/upstart
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-58-generic (recovery mode) (sur /dev/sdb2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.8.0-58-generic-root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro recovery nomodeset-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro recovery nomodeset
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-83-generic (sur /dev/sdb2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-83-generic--90a0f248-65ad-4247-b7ba-fb4e9f632905' {
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
linux /boot/vmlinuz-4.4.0-83-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-83-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-83-generic (upstart) (sur /dev/sdb2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-83-generic--90a0f248-65ad-4247-b7ba-fb4e9f632905' {
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
linux /boot/vmlinuz-4.4.0-83-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff init=/sbin/upstart
initrd /boot/initrd.img-4.4.0-83-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-83-generic (recovery mode) (sur /dev/sdb2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-83-generic-root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro recovery nomodeset-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
linux /boot/vmlinuz-4.4.0-83-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro recovery nomodeset
initrd /boot/initrd.img-4.4.0-83-generic
}
}
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=5f103eb1-ead4-496a-863c-2439c5f132a8 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.8.0-58-generic
}
submenu 'Options avancées pour KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3)' $menuentry_id_option 'osprober-gnulinux-advanced-5f103eb1-ead4-496a-863c-2439c5f132a8' {
menuentry 'GNU/Linux (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.8.0-58-generic--5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=5f103eb1-ead4-496a-863c-2439c5f132a8 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'GNU/Linux, avec Linux 4.8.0-58-generic (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.8.0-58-generic--5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=5f103eb1-ead4-496a-863c-2439c5f132a8 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'GNU/Linux, with Linux 4.8.0-58-generic (recovery mode) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.8.0-58-generic-root=UUID=5f103eb1-ead4-496a-863c-2439c5f132a8 ro recovery nomodeset-5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=5f103eb1-ead4-496a-863c-2439c5f132a8 ro recovery nomodeset
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'GNU/Linux, avec Linux 4.8.0-56-generic (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.8.0-56-generic--5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /boot/vmlinuz-4.8.0-56-generic root=UUID=5f103eb1-ead4-496a-863c-2439c5f132a8 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.8.0-56-generic
}
menuentry 'GNU/Linux, with Linux 4.8.0-56-generic (recovery mode) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.8.0-56-generic-root=UUID=5f103eb1-ead4-496a-863c-2439c5f132a8 ro recovery nomodeset-5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /boot/vmlinuz-4.8.0-56-generic root=UUID=5f103eb1-ead4-496a-863c-2439c5f132a8 ro recovery nomodeset
initrd /boot/initrd.img-4.8.0-56-generic
}
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# [SYSTEME] / was on /dev/sdb1 during installation
UUID=a7428baa-93fd-48e8-922d-637da9044d2f / ext4 discard,noatime,errors=remount-ro 0 1
# [/tmp en RAM]
tmpfs /tmp tmpfs defaults 0 0
# [DATA] /home was on /dev/sdc1 during installation
UUID=b19322e6-8a6d-4e24-b87f-4b0155b41963 /home ext4 defaults 0 2
# [/var/log/ sur DD1To sda]
UUID=c5688e8b-2efb-4565-9216-a2040130d951 /var/log ext4 defaults,nosuid,nodev,noatime 0 2
# [PARTITION ECHANGE] swap was on /dev/sdc5 during installation
UUID=22faac8b-34aa-4425-98a7-184d0613ccff none swap sw 0 0
# [BACKUP] sauvegarde sur /dev/sda1
UUID=006891cb-73bf-49c9-ba36-6d13060aec73 /media/BACKUP ext4 defaults 0 2
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
3.631885529 = 3.899707392 boot/grub/grub.cfg 1
0.464286804 = 0.498524160 boot/grub/i386-pc/core.img 1
9.601242065 = 10.309255168 boot/vmlinuz-4.4.0-83-generic 2
9.601242065 = 10.309255168 vmlinuz 2
10.430660248 = 11.199836160 boot/initrd.img-4.4.0-83-generic 5
10.430660248 = 11.199836160 initrd.img 5
=========================== sdb2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
linux /boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.10.0-27-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
menuentry 'Ubuntu, avec Linux 4.10.0-27-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-27-generic-advanced-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Chargement de Linux 4.10.0-27-generic…'
linux /boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.10.0-27-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-27-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-27-generic-init-upstart-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Chargement de Linux 4.10.0-27-generic…'
linux /boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.10.0-27-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-27-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-27-generic-recovery-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Chargement de Linux 4.10.0-27-generic…'
linux /boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.10.0-27-generic
}
menuentry 'Ubuntu, avec Linux 4.8.0-58-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-advanced-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Chargement de Linux 4.8.0-58-generic…'
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-58-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-init-upstart-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Chargement de Linux 4.8.0-58-generic…'
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-58-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-recovery-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Chargement de Linux 4.8.0-58-generic…'
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-83-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-83-generic-advanced-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Chargement de Linux 4.4.0-83-generic…'
linux /boot/vmlinuz-4.4.0-83-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-83-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-83-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-83-generic-init-upstart-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Chargement de Linux 4.4.0-83-generic…'
linux /boot/vmlinuz-4.4.0-83-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-83-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-83-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-83-generic-recovery-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Chargement de Linux 4.4.0-83-generic…'
linux /boot/vmlinuz-4.4.0-83-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-83-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# [Ubuntu 16.04] / système sur /dev/sdb2 during installation
UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 / ext4 discard,noatime,errors=remount-ro 0 1
# [/tmp en RAM]
tmpfs /tmp tmpfs defaults 0 0
# [données utilisateurs] /home sur /dev/sdc1
UUID=b19322e6-8a6d-4e24-b87f-4b0155b41963 /home ext4 defaults 0 2
# [/var/log/ sur DD1To sda]
UUID=c5688e8b-2efb-4565-9216-a2040130d951 /var/log ext4 defaults,nosuid,nodev,noatime 0 2
# [partition échange] swap sur /dev/sdc5
UUID=22faac8b-34aa-4425-98a7-184d0613ccff none swap sw 0 0
# [BACKUP] sauvegarde sur /dev/sda1
UUID=006891cb-73bf-49c9-ba36-6d13060aec73 /media/BACKUP ext4 defaults 0 2--------------------------------------------------------------------------------
=================== sdb2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
39.852588654 = 42.791391232 boot/grub/grub.cfg 1
39.081356049 = 41.963286528 boot/grub/i386-pc/core.img 1
30.661113739 = 32.922120192 boot/vmlinuz-4.10.0-27-generic 1
27.984088898 = 30.047686656 boot/vmlinuz-4.4.0-83-generic 1
30.882781982 = 33.160134656 boot/vmlinuz-4.8.0-58-generic 1
30.661113739 = 32.922120192 vmlinuz 1
30.882781982 = 33.160134656 vmlinuz.old 1
31.750972748 = 34.092347392 boot/initrd.img-4.10.0-27-generic 5
32.989631653 = 35.422347264 boot/initrd.img-4.4.0-36-generic.old-dkms 2
24.231819153 = 26.018717696 boot/initrd.img-4.4.0-38-generic.old-dkms 2
34.227535248 = 36.751536128 boot/initrd.img-4.4.0-42-generic.old-dkms 2
25.321285248 = 27.188523008 boot/initrd.img-4.4.0-43-generic.old-dkms 2
31.005264282 = 33.291649024 boot/initrd.img-4.4.0-45-generic.old-dkms 2
46.716239929 = 50.161180672 boot/initrd.img-4.4.0-47-generic.old-dkms 1
46.727535248 = 50.173308928 boot/initrd.img-4.4.0-53-generic.old-dkms 2
46.539733887 = 49.971658752 boot/initrd.img-4.4.0-57-generic.old-dkms 2
35.595905304 = 38.220812288 boot/initrd.img-4.4.0-59-generic.old-dkms 3
36.865711212 = 39.584256000 boot/initrd.img-4.4.0-62-generic.old-dkms 2
36.809776306 = 39.524196352 boot/initrd.img-4.4.0-64-generic.old-dkms 2
36.903522491 = 39.624855552 boot/initrd.img-4.4.0-66-generic.old-dkms 3
36.934783936 = 39.658422272 boot/initrd.img-4.4.0-67-generic.old-dkms 2
32.700714111 = 35.112124416 boot/initrd.img-4.4.0-83-generic 5
32.952877045 = 35.382882304 boot/initrd.img-4.8.0-58-generic 5
31.750972748 = 34.092347392 initrd.img 5
32.952877045 = 35.382882304 initrd.img.old 5
=========================== sdb3/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
insmod gfxmenu
loadfont ($root)/boot/grub/themes/breeze/unifont-bold-16.pf2
loadfont ($root)/boot/grub/themes/breeze/unifont-regular-14.pf2
loadfont ($root)/boot/grub/themes/breeze/unifont-regular-16.pf2
loadfont ($root)/boot/grub/themes/breeze/unifont-regular-32.pf2
insmod png
set theme=($root)/boot/grub/themes/breeze/theme.txt
export theme
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'GNU/Linux' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-5f103eb1-ead4-496a-863c-2439c5f132a8' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=5f103eb1-ead4-496a-863c-2439c5f132a8 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.8.0-58-generic
}
submenu 'Options avancées pour GNU/Linux' $menuentry_id_option 'gnulinux-advanced-5f103eb1-ead4-496a-863c-2439c5f132a8' {
menuentry 'GNU/Linux, avec Linux 4.8.0-58-generic' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-advanced-5f103eb1-ead4-496a-863c-2439c5f132a8' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
echo 'Chargement de Linux 4.8.0-58-generic…'
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=5f103eb1-ead4-496a-863c-2439c5f132a8 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'GNU/Linux, with Linux 4.8.0-58-generic (recovery mode)' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-recovery-5f103eb1-ead4-496a-863c-2439c5f132a8' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
echo 'Chargement de Linux 4.8.0-58-generic…'
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=5f103eb1-ead4-496a-863c-2439c5f132a8 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'GNU/Linux, avec Linux 4.8.0-56-generic' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-56-generic-advanced-5f103eb1-ead4-496a-863c-2439c5f132a8' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
echo 'Chargement de Linux 4.8.0-56-generic…'
linux /boot/vmlinuz-4.8.0-56-generic root=UUID=5f103eb1-ead4-496a-863c-2439c5f132a8 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-56-generic
}
menuentry 'GNU/Linux, with Linux 4.8.0-56-generic (recovery mode)' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-56-generic-recovery-5f103eb1-ead4-496a-863c-2439c5f132a8' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
echo 'Chargement de Linux 4.8.0-56-generic…'
linux /boot/vmlinuz-4.8.0-56-generic root=UUID=5f103eb1-ead4-496a-863c-2439c5f132a8 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.8.0-56-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / systeme kde-neon-user-edition sur SSD /dev/sdb3
UUID=5f103eb1-ead4-496a-863c-2439c5f132a8 / ext4 errors=remount-ro 0 1
# /home sur DD /dev/sdc1
UUID=b19322e6-8a6d-4e24-b87f-4b0155b41963 /home ext4 defaults 0 2
# swap was on /dev/sdc5 during installation
UUID=22faac8b-34aa-4425-98a7-184d0613ccff none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb3: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
71.046886444 = 76.286013440 boot/grub/grub.cfg 1
53.494937897 = 57.439752192 boot/grub/i386-pc/core.img 1
57.946231842 = 62.219292672 boot/vmlinuz-4.8.0-56-generic 1
55.371131897 = 59.454300160 boot/vmlinuz-4.8.0-58-generic 1
55.371131897 = 59.454300160 vmlinuz 1
57.946231842 = 62.219292672 vmlinuz.old 1
77.314655304 = 83.015979008 boot/initrd.img-4.8.0-56-generic 3
75.105564117 = 80.643985408 boot/initrd.img-4.8.0-58-generic 5
75.105564117 = 80.643985408 initrd.img 5
77.314655304 = 83.015979008 initrd.img.old 3
========= Devices which don't seem to have a corresponding hard drive: =========
sdd
ADDITIONAL INFORMATION :
=================== log of boot-info 2017-07-24__01h06 ===================
boot-info version : 4ppa40
boot-sav version : 4ppa40
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa40
boot-info is executed in installed-session (Ubuntu 16.04.2 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash
Partition 2 does not start on physical sector boundary.
=================== os-prober:
/dev/sdb2:L'OS actuellement utilisé - Ubuntu 16.04.2 LTS CurrentSession:linux
/dev/sdb1:Ubuntu 14.04.5 LTS (14.04):Ubuntu:linux
/dev/sdb3:KDE neon User Edition 5.10 (16.04):neon:linux
=================== blkid:
/dev/sda1: LABEL="BACKUP" UUID="006891cb-73bf-49c9-ba36-6d13060aec73" TYPE="ext4" PARTUUID="cdd74f3b-01"
/dev/sda2: LABEL="LOGS" UUID="c5688e8b-2efb-4565-9216-a2040130d951" TYPE="ext4" PARTUUID="cdd74f3b-02"
/dev/sdb1: LABEL="Ubuntu14.04" UUID="a7428baa-93fd-48e8-922d-637da9044d2f" TYPE="ext4" PARTUUID="00019478-01"
/dev/sdb2: LABEL="Ubuntu16.04" UUID="90a0f248-65ad-4247-b7ba-fb4e9f632905" TYPE="ext4" PARTUUID="00019478-02"
/dev/sdb3: LABEL="KDE-Neon" UUID="5f103eb1-ead4-496a-863c-2439c5f132a8" TYPE="ext4" PARTUUID="00019478-03"
/dev/sdc1: LABEL="DATA" UUID="b19322e6-8a6d-4e24-b87f-4b0155b41963" TYPE="ext4" PARTUUID="0002bf49-01"
/dev/sdc5: UUID="22faac8b-34aa-4425-98a7-184d0613ccff" TYPE="swap" PARTUUID="0002bf49-05"
1 disks with OS, 3 OS : 3 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Partition 2 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juin 16 21:26 grub.d
total 80
-rwxr-xr-x 1 root root 9791 juin 17 2016 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 mars 1 22:01 10_linux
-rwxr-xr-x 1 root root 11082 juin 17 2016 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rw-r--r-- 1 root root 11692 juin 17 2016 30_os-prober
-rwxr-xr-x 1 root root 1418 juin 17 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juin 17 2016 40_custom
-rwxr-xr-x 1 root root 216 juin 17 2016 41_custom
-rw-r--r-- 1 root root 483 juin 17 2016 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sdb1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 août 4 2016 grub.d
total 76
-rwxr-xr-x 1 root root 9791 déc. 17 2015 00_header
-rwxr-xr-x 1 root root 6058 avril 10 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 avril 11 2014 10_linux
-rwxr-xr-x 1 root root 10412 avril 11 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 avril 11 2014 30_os-prober
-rwxr-xr-x 1 root root 1418 août 2 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 oct. 10 2013 40_custom
-rwxr-xr-x 1 root root 216 oct. 10 2013 41_custom
-rw-r--r-- 1 root root 483 oct. 10 2013 README
=================== sdb1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=4
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sdb3/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juin 19 12:27 grub.d
total 80
-rwxr-xr-x 1 root root 9791 mars 24 07:32 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 mars 24 07:32 10_linux
-rwxr-xr-x 1 root root 11082 mars 24 07:32 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rw-r--r-- 1 root root 11692 mars 24 07:32 30_os-prober
-rwxr-xr-x 1 root root 1418 mars 24 07:32 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mars 24 07:32 40_custom
-rwxr-xr-x 1 root root 216 mars 24 07:32 41_custom
-rw-r--r-- 1 root root 483 mars 24 07:32 README
=================== sdb3/etc/default/grub :
GRUB_THEME=/boot/grub/themes/breeze/theme.txt
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sdb2 : sdb, not-sepboot, grubenv-ok grub2, signed grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, .
sda1 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /media/BACKUP.
sda2 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /var/log.
sdb1 : sdb, not-sepboot, grubenv-ok grub2, grub-pc grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, /mnt/boot-sav/sdb1.
sdb3 : sdb, not-sepboot, grubenv-ok grub2, signed grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, /mnt/boot-sav/sdb3.
sdc1 : sdc, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /home.
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 63 sectors * 512 bytes
sdc : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA Hitachi HDS72101 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 32.3kB 999GB 999GB primary ext4
2 999GB 1000GB 1072MB primary ext4
Model: ATA Samsung SSD 840 (scsi)
Disk /dev/sdb: 120GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 25.7GB 25.7GB primary ext4 boot
2 25.7GB 54.7GB 29.0GB primary ext4
3 54.7GB 87.3GB 32.7GB primary ext4
Model: ATA WDC WD10EZEX-00B (scsi)
Disk /dev/sdc: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 999GB 999GB primary ext4
2 999GB 1000GB 779MB extended
5 999GB 1000GB 779MB logical linux-swap(v1)
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:512:msdos:ATA Hitachi HDS72101:;
1:32.3kB:999GB:999GB:ext4::;
2:999GB:1000GB:1072MB:ext4::;
BYT;
/dev/sdb:120GB:scsi:512:512:msdos:ATA Samsung SSD 840:;
1:1049kB:25.7GB:25.7GB:ext4::boot;
2:25.7GB:54.7GB:29.0GB:ext4::;
3:54.7GB:87.3GB:32.7GB:ext4::;
BYT;
/dev/sdc:1000GB:scsi:512:4096:msdos:ATA WDC WD10EZEX-00B:;
1:1049kB:999GB:999GB:ext4::;
2:999GB:1000GB:779MB:::;
5:999GB:1000GB:779MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sdb disk 111,8G
sdb2 part ext4 27G Ubuntu16.04
sdb3 part ext4 30,5G KDE-Neon
sdb1 part ext4 23,9G Ubuntu14.04
sr0 rom 1024M
sdc disk 931,5G
sdc2 part 1K
sdc5 part swap 743M
sdc1 part ext4 930,8G DATA
sda disk 931,5G
sda2 part ext4 1022M LOGS
sda1 part ext4 930,5G BACKUP
KNAME ROTA RO RM STATE MOUNTPOINT
sdb 0 0 0 running
sdb2 0 0 0 /
sdb3 0 0 0 /mnt/boot-sav/sdb3
sdb1 0 0 0 /mnt/boot-sav/sdb1
sr0 1 0 1 running
sdc 1 0 0 running
sdc2 1 0 0
sdc5 1 0 0 [SWAP]
sdc1 1 0 0 /home
sda 1 0 0 running
sda2 1 0 0 /var/log
sda1 1 0 0 /media/BACKUP
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=8127144k,nr_inodes=2031786,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=1629908k,mode=755)
/dev/sdb2 on / type ext4 (rw,noatime,discard,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=2653)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,relatime)
/dev/sda2 on /var/log type ext4 (rw,nosuid,nodev,noatime,data=ordered)
/dev/sda1 on /media/BACKUP type ext4 (rw,relatime,data=ordered)
/dev/sdc1 on /home type ext4 (rw,relatime,data=ordered)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
tmpfs on /run/user/108 type tmpfs (rw,nosuid,nodev,relatime,size=1629908k,mode=700,uid=108,gid=114)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=1629908k,mode=700,uid=1000,gid=1002)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1002)
/dev/sdb1 on /mnt/boot-sav/sdb1 type ext4 (rw,relatime,data=ordered)
/dev/sdb3 on /mnt/boot-sav/sdb3 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb2 sdb3 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdc1 sdc2 sdc5 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 initctl input kmsg kvm lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sdb sdb1 sdb2 sdb3 sdc sdc1 sdc2 sdc5 sdd sg0 sg1 sg2 sg3 sg4 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type
Partition 2 does not start on physical sector boundary.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 7.8G 0 7.8G 0% /dev
tmpfs tmpfs 1.6G 9.5M 1.6G 1% /run
/dev/sdb2 ext4 27G 9.6G 16G 39% /
tmpfs tmpfs 7.8G 340K 7.8G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 7.8G 0 7.8G 0% /sys/fs/cgroup
tmpfs tmpfs 7.8G 1.3M 7.8G 1% /tmp
/dev/sda2 ext4 990M 35M 888M 4% /var/log
/dev/sda1 ext4 916G 714G 156G 83% /media/BACKUP
/dev/sdc1 ext4 917G 411G 460G 48% /home
tmpfs tmpfs 1.6G 4.0K 1.6G 1% /run/user/108
tmpfs tmpfs 1.6G 76K 1.6G 1% /run/user/1000
/dev/sdb1 ext4 24G 9.2G 14G 42% /mnt/boot-sav/sdb1
/dev/sdb3 ext4 30G 6.2G 23G 22% /mnt/boot-sav/sdb3
=================== fdisk -l:
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xcdd74f3b
Device Boot Start End Sectors Size Id Type
/dev/sda1 63 1951430655 1951430593 930.5G 83 Linux
/dev/sda2 1951430656 1953523711 2093056 1022M 83 Linux
Disk /dev/sdb: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00019478
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 2048 50120703 50118656 23.9G 83 Linux
/dev/sdb2 50120704 106761328 56640625 27G 83 Linux
/dev/sdb3 106762240 170602495 63840256 30.5G 83 Linux
Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x0002bf49
Device Boot Start End Sectors Size Id Type
/dev/sdc1 2048 1951999999 1951997952 930.8G 83 Linux
/dev/sdc2 1952002046 1953523711 1521666 743M 5 Extended
/dev/sdc5 1952002048 1953523711 1521664 743M 82 Linux swap / Solaris
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to) and reinstall the grub2 of sdb2 into the MBRs of all disks (except USB without OS).
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sdb (120GB) !
=================== User settings
The settings chosen by the user will not act on the boot.Cela après avoir enlever l'exécution des OS_prober de 16.04 et neon…
Et je vous remets pas de photos mais si je vais dans les options avancées de chaque os j'ai de 2 à 8 lignes, selon le nombre de kernels, et plus un écran rempli…
Me reste à comprendre comment boot-repair peut m'aider à utiliser le grub(2?) de sdb2 ( 16.04 ) plutôt que le grub(2?) de 14.04 au démarrage ( et re-modifier les OS_prober en conséquence ).
Pour les prochains o.s. je pense avoir compris : « j'annule » leur OS_prober, sudo update-grub, reboot. Dans 16.04 ( qui aurait OS_prober éxécutable ) sudo-update-grub.
C'est juste moi ou c'est pas si simple le multi-boot ? Y-a-pas un outil dédié pour ça, pour faciliter / centraliser la découverte des o.s. ? Ou alors j'aurais dû dès le départ créer une assez grosse participation /boot distincte ?
Dernière modification par Coeur Noir (Le 24/07/2017, à 00:23)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#54 Le 24/07/2017, à 06:02
- moko138
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
P.S. : j'ai noté que c'est sur Ubuntu 16.04 que tu veux démarrer.
= = = = =
Mais qu'est-ce que vous avez fichu hier soir ???
Coeur Noir,
Tu as ajouté un problème de paquets !!!
Tu le savais, pourtant, qu'en dépannage, les initiatives unilatérales foutelame !
Babdu89,
Ta méthode, exposée en #16, convient parfaitement aux gens qui ont plusieurs dizaines de *buntu, difficiles à distinguer, dans une seule machine. Comme toi.
Coeur Noir,
Tu as trois *buntu...
- -
En #50, Coeur Noir a écrit :
( enlever exécution, conseil de moko )
NEIN !!! Relis le #41, tu verras que je ne t'y ai pas dit de retirer l'exécutabilité de 30_os-prober.
Relis #7, 11 (où est ton chrono ?), 13 et 15. Ensuite fais ton choix :
soit tu suivras le modèle de Babdu89
(plusieurs /boot/grub/grub.cfg cumulant plusieurs milliers de lignes),
soit tu suivras celui de Rufus et moi
(un seul /boot/grub/grub.cfg de 120 lignes).
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#55 Le 24/07/2017, à 08:28
- Babdu89
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Bonjour.
Me reste à comprendre comment boot-repair peut m'aider à utiliser le grub(2?) de sdb2 ( 16.04 ) plutôt que le grub(2?) de 14.04 au démarrage ( et re-modifier les OS_prober en conséquence ).
Alors, l'utilisation de Boot-Repair, peut se faire depuis une session live, ou depuis une session installée. Soit en passant par la réparation recommandée, ou par les Options avancées.
Personnellement, j'utilise Boot-Repair en passant par les Options avancées pour choisir l'Os de réinstallation de Grub. Et pouvoir choisir de mettre grub première partie dans le secteur de boot du disque de mon choix.
À savoir.
Utilisation de Boot-Repair depuis une session installée. Il ne pourra réinstaller Grub que dans l'Os depuis lequel il est lancé. Avec les Options avancées, on peut choisir le disque (secteur de boot recevant la première partie de Grub.).
Utilisation de Boot-Repair depuis une session live. On pourra réinstaller Grub dans tous les Os présents dans la config. Avec les Options avancées, on peut choisir le disque (secteur de boot recevant la première partie de Grub.).
À suivre la réinstallation de grub dans la 16.04, pour en faire l'Os par défaut au démarrage.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#56 Le 24/07/2017, à 08:33
- Babdu89
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Réinstaller Grub dans la 16.04.
Dans la Neon, le script 30_os-prober doit être désactivé, maj de Grub de la Néon faite en suivant. (C'est fait).
Dans la 14.04, le script 30_os-prober doit être désactivé, maj de Grub de la 14.04 faite en suivant. (C'est à faire).
Dans la 16.04, le script 30_os-prober doit être réactivé, suivi d'une maj de Grub de la 16.04. (c'est a faire).
À suivre l'utilisation de Boot-Repair en passant par les Options avancées.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#57 Le 24/07/2017, à 10:34
- Babdu89
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Utilisation de Boot-Repair en passant par les Options avancées.
En session live ou installée, installer/utiliser Boot-Repair.
Par les Options avancées;
Onglet "Options principales".
Cocher "Réinstaller Grub"
Cocher "Faire apparaître le menu de démarrage" et indiquer un temps en secondes qui te convient, au trimeout.
Onglet "Emplacement de Grub"
Dans "Os par défaut au démarrage" choisir ; sdb2 la 16.04.
Dans "Placer Grub dans" choisir; sdb
Laisser le temps à Boot-Repair de refaire le calcul des indications, lorsque tout est bon.
Faire "Appliquer" .
La réinstallation de grub se fera dans la 16.04 en /sdb2. La première partie de Grub sera installée dans le secteur de boot de /sdb.
Il n'y aura pas de changement dans les secteurs de boot de /sda et /sdc. Le grub première partie pointera encore sur la partition /sdb1 de la 14.04.
Remarque,
On peut faire la même chose que Boot-Repair (sans le timeout) en commandes.
Depuis la 16.04;
sudo os-prober
sudo update-grub
sudo grub-install /dev/sdb@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#58 Le 24/07/2017, à 13:53
- Coeur Noir
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
moko138 a écrit :
Coeur Noir,
Tu as ajouté un problème de paquets !!!
Tu le savais, pourtant, qu'en dépannage, les initiatives unilatérales foutelame !
Boot-repair a ajouté un problème de paquets lorsque j'ai suivi à la lettre ses recommandations. Depuis synaptic ne voit cependant pas de problème, des apt update upgrade install -f autoremove --purge ont été passés sans alertes particulières…
moko138 a écrit :
En #50, Coeur Noir a écrit :( enlever exécution, conseil de moko )
NEIN !!! Relis le #41, tu verras que je ne t'y ai pas dit de retirer l'exécutabilité de 30_os-prober.
Ah oui. En fait tu valides le fait que j'ai bien OS_prober activé. J'ai pris ça pour un « attention c'est là l'origine du souci » d'où le smiley que je trouvais victorieux. Moi et ma logique…
moko138 a écrit :
Relis #7, 11 (où est ton chrono ?), 13 et 15. Ensuite fais ton choix :
soit tu suivras le modèle de Babdu89
(plusieurs /boot/grub/grub.cfg cumulant plusieurs milliers de lignes),
soit tu suivras celui de Rufus et moi
(un seul /boot/grub/grub.cfg de 120 lignes).
Je voudrais bien la + légère / simple / rapide mais pour ça on est d'accord il faut que je m'assure d'avoir un grub valide à un certain endroit.
Et voir post #17 mais c'était avant que je commence à comprendre comment ça marche…
Cela dit, enlever l'exécution des OS_prober de 16.04 et neon ( sachant que mon pc démarre toujours depuis le grub de 14.04 ) a divisé par 2 le nombre de lignes, c'est un progrès.
Dernière modification par Coeur Noir (Le 24/07/2017, à 14:18)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#59 Le 24/07/2017, à 14:00
- Coeur Noir
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Babdu89 a écrit :
Utilisation de Boot-Repair en passant par les Options avancées.
En session live ou installée, installer/utiliser Boot-Repair.
Par les Options avancées;
Onglet "Options principales".
Cocher "Réinstaller Grub"
Cocher "Faire apparaître le menu de démarrage" et indiquer un temps en secondes qui te convient, au timeout.
Onglet "Emplacement de Grub"
Dans "Os par défaut au démarrage" choisir ; sdb2 la 16.04.
Dans "Placer Grub dans" choisir; sdb
Laisser le temps à Boot-Repair de refaire le calcul des indications, lorsque tout est bon.
Faire "Appliquer"
Bon. C'est bien ce que j'avais fait. 10s est proposé par défaut comme timeout, choisir sdb2, sdb.
Ensuite appliquer → demande de passer les commandes → voir post #46 → d'où doute, boot-repair a fait des modif's ou pas, moi j'ai pas l'impression c'est toujours le /etc/default/grub de la 14.04 qui prévaut.
Je vais tenter les commandes…
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#60 Le 24/07/2017, à 14:43
- Babdu89
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
moi j'ai pas l'impression c'est toujours le /etc/default/grub de la 14.04 qui prévaut.
Non!, çà ne peut pas être çà pour démarrer, c'est le fichier /boot/grub/grub.cfg de la 16.04 qui sert à faire le menu Grub pour démarrer.
Stp, sans plus rien toucher.
Tu démarres la machine et tu laisses le système se charger tout seul. Tu ne touches pas au proposition de démarrage affiché au menu Grub.
Depuis le système qui se charge, tu passes
grep menuentry /boot/grub/grub.cfgEt tu donnes le retour. Merci.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#61 Le 24/07/2017, à 15:33
- Coeur Noir
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Depuis 16.04, donc.
coeurnoir@Asgard:~$ grep menuentry /boot/grub/grub.cfg
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
menuentry_id_option=""
export menuentry_id_option
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
menuentry 'Ubuntu, avec Linux 4.10.0-27-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-27-generic-advanced-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
menuentry 'Ubuntu, with Linux 4.10.0-27-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-27-generic-init-upstart-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
menuentry 'Ubuntu, with Linux 4.10.0-27-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-27-generic-recovery-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
menuentry 'Ubuntu, avec Linux 4.8.0-58-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-advanced-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
menuentry 'Ubuntu, with Linux 4.8.0-58-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-init-upstart-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
menuentry 'Ubuntu, with Linux 4.8.0-58-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-recovery-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
menuentry 'Ubuntu, avec Linux 4.4.0-87-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-87-generic-advanced-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
menuentry 'Ubuntu, with Linux 4.4.0-87-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-87-generic-init-upstart-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
menuentry 'Ubuntu, with Linux 4.4.0-87-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-87-generic-recovery-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
menuentry 'Memory test (memtest86+)' {
menuentry 'Memory test (memtest86+, serial console 115200)' {
menuentry 'Ubuntu 14.04.5 LTS (14.04) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-a7428baa-93fd-48e8-922d-637da9044d2f' {
submenu 'Options avancées pour Ubuntu 14.04.5 LTS (14.04) (sur /dev/sdb1)' $menuentry_id_option 'osprober-gnulinux-advanced-a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'Ubuntu (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-87-generic--a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'Ubuntu, avec Linux 4.4.0-87-generic (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-87-generic--a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'Ubuntu, with Linux 4.4.0-87-generic (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-87-generic-root=UUID=a7428baa-93fd-48e8-922d-637da9044d2f ro recovery nomodeset-a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'Ubuntu, avec Linux 4.4.0-83-generic (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-83-generic--a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'Ubuntu, with Linux 4.4.0-83-generic (recovery mode) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-83-generic-root=UUID=a7428baa-93fd-48e8-922d-637da9044d2f ro recovery nomodeset-a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'Ubuntu, avec Linux 4.4.0-87-generic (sur /dev/sdb2) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-87-generic--a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'Ubuntu, with Linux 4.4.0-87-generic (upstart) (sur /dev/sdb2) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-87-generic--a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'Ubuntu, with Linux 4.4.0-87-generic (recovery mode) (sur /dev/sdb2) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-87-generic-root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro recovery nomodeset-a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz.old--a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-5f103eb1-ead4-496a-863c-2439c5f132a8' {
submenu 'Options avancées pour KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3)' $menuentry_id_option 'osprober-gnulinux-advanced-5f103eb1-ead4-496a-863c-2439c5f132a8' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5f103eb1-ead4-496a-863c-2439c5f132a8' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5f103eb1-ead4-496a-863c-2439c5f132a8' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5f103eb1-ead4-496a-863c-2439c5f132a8' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.10.0-27-generic--5f103eb1-ead4-496a-863c-2439c5f132a8' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.8.0-58-generic--5f103eb1-ead4-496a-863c-2439c5f132a8' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5f103eb1-ead4-496a-863c-2439c5f132a8' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5f103eb1-ead4-496a-863c-2439c5f132a8' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5f103eb1-ead4-496a-863c-2439c5f132a8' {
menuentry 'KDE neon User Edition 5.10 (16.04) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz.old--5f103eb1-ead4-496a-863c-2439c5f132a8' {Note, les menus de la KDE ne mentionnent pas le noyau, ce qui n'est pas pratique.
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#62 Le 24/07/2017, à 16:13
- moko138
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
En #54, moko138 a écrit :
Relis #7, 11 (où est ton chrono ?), 13 et 15. Ensuite fais ton choix :
soit tu suivras le modèle de Babdu89
(plusieurs /boot/grub/grub.cfg cumulant plusieurs milliers de lignes),
soit tu suivras celui de Rufus et moi
(un seul /boot/grub/grub.cfg de 120 lignes).
- -
En #59, Coeur Noir a écrit :
En #57 Babdu89 a écrit :Utilisation de Boot-Repair en passant par les Options avancées.
En session live ou installée, installer/utiliser Boot-Repair.
Par les Options avancées;
Onglet "Options principales".
Cocher "Réinstaller Grub"
Cocher "Faire apparaître le menu de démarrage" et indiquer un temps en secondes qui te convient, au timeout.
Onglet "Emplacement de Grub"
Dans "Os par défaut au démarrage" choisir ; sdb2 la 16.04.
Dans "Placer Grub dans" choisir; sdb
Laisser le temps à Boot-Repair de refaire le calcul des indications, lorsque tout est bon.
Faire "Appliquer"Bon. C'est bien ce que j'avais fait. 10s est proposé par défaut comme timeout, choisir sdb2, sdb.
Ensuite appliquer → demande de passer les commandes → voir post #46 → d'où doute, boot-repair a fait des modif's ou pas, moi j'ai pas l'impression c'est toujours le /etc/default/grub de la 14.04 qui prévaut.Je vais tenter les commandes…
Tu as fait ton choix.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#63 Le 24/07/2017, à 16:16
- Babdu89
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Ok! merci, donc la machine démarre bien avec le Grub de la 16.04.
Édit;
Dans la 16.04, on voit que tu as trois versions du noyau installés.
Le 4.4.0-87 est a supprimer. Tu peux utiliser Kclean de Hoper.
https://forum.ubuntu-fr.org/viewtopic.php?id=242358
@+. Babdu89 .
Dernière modification par Babdu89 (Le 24/07/2017, à 16:51)
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#64 Le 24/07/2017, à 16:50
- Coeur Noir
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Maintenant oui : didiou… je crois que je suis arrivé à mes fins… et au final ça ressemble davantage à la solution de Moko je crois bien.
Car non ce n'était toujours pas le grub de 16.04 qui s'affichait mais bien celui de sdb1, il y avait toujours des doublons ( au moins ) au niveau de kde…
Donc j'ai purement supprimé les grub de 14.04 et neon, verifié qu'il n'y avait plus de grub.cfg dans leurs /boot.
Re-passé un coup de boot-repair MAIS en tronquant un peu la troisième commande qu'il propose ( sans chercher à supprimer shim et linux-signed* ) du coup là j'ai pu accéder aux étapes suivantes de sa procédure ( choisir dans l'interface semi graphique sdb et sdb2, réinstaller grub ).
Par contre cet imbécile de boot-repair écrit ses rapports de boot-info dans /root/ !
Du coup maintenant j'ai :
Boot Info Script cfd9efe + Boot-Repair extra info [Boot-Info 26Apr2016]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for /boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk search_fs_uuid
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
search.fs_uuid a7428baa-93fd-48e8-922d-637da9044d2f root hd1,msdos1
set prefix=($root)'/boot/grub'
---------------------------------------------------------------------------
=> Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos2)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Grub2 (v2.00) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for /boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk search_fs_uuid
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
search.fs_uuid a7428baa-93fd-48e8-922d-637da9044d2f root hd1,msdos1
set prefix=($root)'/boot/grub'
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.5 LTS
Boot files: /etc/fstab /boot/grub/i386-pc/core.img
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v2.00) is installed in the boot sector of sdb2
and looks at sector 82865648 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos2)/boot/grub. It also embeds following
components:
modules
-------------------------------------------------------
fshelp ext2 part_msdos biosdisk
-------------------------------------------------------
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sdb3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: KDE neon User Edition 5.10
Boot files: /etc/fstab /boot/grub/i386-pc/core.img
sdc1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdc5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 63 1,951,430,655 1,951,430,593 83 Linux
/dev/sda2 1,951,430,656 1,953,523,711 2,093,056 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 2,048 50,120,703 50,118,656 83 Linux
/dev/sdb2 * 50,120,704 106,761,328 56,640,625 83 Linux
/dev/sdb3 106,762,240 170,602,495 63,840,256 83 Linux
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 2,048 1,951,999,999 1,951,997,952 83 Linux
/dev/sdc2 1,952,002,046 1,953,523,711 1,521,666 5 Extended
/dev/sdc5 1,952,002,048 1,953,523,711 1,521,664 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 006891cb-73bf-49c9-ba36-6d13060aec73 ext4 BACKUP
/dev/sda2 c5688e8b-2efb-4565-9216-a2040130d951 ext4 LOGS
/dev/sdb1 a7428baa-93fd-48e8-922d-637da9044d2f ext4 Ubuntu14.04
/dev/sdb2 90a0f248-65ad-4247-b7ba-fb4e9f632905 ext4 Ubuntu16.04
/dev/sdb3 5f103eb1-ead4-496a-863c-2439c5f132a8 ext4 KDE-Neon
/dev/sdc1 b19322e6-8a6d-4e24-b87f-4b0155b41963 ext4 DATA
/dev/sdc5 22faac8b-34aa-4425-98a7-184d0613ccff swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jul 24 2017 ata-ATAPI_iHAS124_Y -> ../../sr0
lrwxrwxrwx 1 root root 9 Jul 24 17:28 ata-Hitachi_HDS721010CLA332_JP6940HZ0U2JAF -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 24 17:28 ata-Hitachi_HDS721010CLA332_JP6940HZ0U2JAF-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 24 17:28 ata-Hitachi_HDS721010CLA332_JP6940HZ0U2JAF-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 Jul 24 17:28 ata-Samsung_SSD_840_EVO_120GB_S1D5NSADB89673F -> ../../sdb
lrwxrwxrwx 1 root root 10 Jul 24 17:28 ata-Samsung_SSD_840_EVO_120GB_S1D5NSADB89673F-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jul 24 17:28 ata-Samsung_SSD_840_EVO_120GB_S1D5NSADB89673F-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jul 24 17:28 ata-Samsung_SSD_840_EVO_120GB_S1D5NSADB89673F-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 9 Jul 24 17:28 ata-WDC_WD10EZEX-00BN5A0_WD-WCC3F0348707 -> ../../sdc
lrwxrwxrwx 1 root root 10 Jul 24 17:28 ata-WDC_WD10EZEX-00BN5A0_WD-WCC3F0348707-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 10 Jul 24 17:28 ata-WDC_WD10EZEX-00BN5A0_WD-WCC3F0348707-part2 -> ../../sdc2
lrwxrwxrwx 1 root root 10 Jul 24 17:28 ata-WDC_WD10EZEX-00BN5A0_WD-WCC3F0348707-part5 -> ../../sdc5
lrwxrwxrwx 1 root root 9 Jul 24 17:27 usb-Generic-_Multi-Card_20060413092100000-0:0 -> ../../sdd
lrwxrwxrwx 1 root root 9 Jul 24 17:28 wwn-0x5000cca375cb66c3 -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 24 17:28 wwn-0x5000cca375cb66c3-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 24 17:28 wwn-0x5000cca375cb66c3-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 Jul 24 17:28 wwn-0x50014ee20959e582 -> ../../sdc
lrwxrwxrwx 1 root root 10 Jul 24 17:28 wwn-0x50014ee20959e582-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 10 Jul 24 17:28 wwn-0x50014ee20959e582-part2 -> ../../sdc2
lrwxrwxrwx 1 root root 10 Jul 24 17:28 wwn-0x50014ee20959e582-part5 -> ../../sdc5
lrwxrwxrwx 1 root root 9 Jul 24 17:28 wwn-0x50025388a00e26fd -> ../../sdb
lrwxrwxrwx 1 root root 10 Jul 24 17:28 wwn-0x50025388a00e26fd-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jul 24 17:28 wwn-0x50025388a00e26fd-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jul 24 17:28 wwn-0x50025388a00e26fd-part3 -> ../../sdb3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /media/BACKUP ext4 (rw,relatime,data=ordered)
/dev/sda2 /var/log ext4 (rw,nosuid,nodev,noatime,data=ordered)
/dev/sdb2 / ext4 (rw,noatime,discard,errors=remount-ro,data=ordered)
/dev/sdc1 /home ext4 (rw,relatime,data=ordered)
=============================== sdb1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# [SYSTEME] / was on /dev/sdb1 during installation
UUID=a7428baa-93fd-48e8-922d-637da9044d2f / ext4 discard,noatime,errors=remount-ro 0 1
# [/tmp en RAM]
tmpfs /tmp tmpfs defaults 0 0
# [DATA] /home was on /dev/sdc1 during installation
UUID=b19322e6-8a6d-4e24-b87f-4b0155b41963 /home ext4 defaults 0 2
# [/var/log/ sur DD1To sda]
UUID=c5688e8b-2efb-4565-9216-a2040130d951 /var/log ext4 defaults,nosuid,nodev,noatime 0 2
# [PARTITION ECHANGE] swap was on /dev/sdc5 during installation
UUID=22faac8b-34aa-4425-98a7-184d0613ccff none swap sw 0 0
# [BACKUP] sauvegarde sur /dev/sda1
UUID=006891cb-73bf-49c9-ba36-6d13060aec73 /media/BACKUP ext4 defaults 0 2
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
0.464286804 = 0.498524160 boot/grub/i386-pc/core.img 1
9.601242065 = 10.309255168 boot/vmlinuz-4.4.0-83-generic 2
10.812179565 = 11.609489408 boot/vmlinuz-4.4.0-87-generic 2
10.812179565 = 11.609489408 vmlinuz 2
9.601242065 = 10.309255168 vmlinuz.old 2
10.430660248 = 11.199836160 boot/initrd.img-4.4.0-83-generic 5
19.959247589 = 21.431078912 boot/initrd.img-4.4.0-87-generic 1
19.959247589 = 21.431078912 initrd.img 1
10.430660248 = 11.199836160 initrd.img.old 5
=========================== sdb2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
linux /boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.10.0-27-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
menuentry 'Ubuntu, with Linux 4.10.0-27-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-27-generic-advanced-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Loading Linux 4.10.0-27-generic ...'
linux /boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.10.0-27-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-27-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-27-generic-init-upstart-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Loading Linux 4.10.0-27-generic ...'
linux /boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.10.0-27-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-27-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-27-generic-recovery-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Loading Linux 4.10.0-27-generic ...'
linux /boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.10.0-27-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-58-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-advanced-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Loading Linux 4.8.0-58-generic ...'
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-58-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-init-upstart-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Loading Linux 4.8.0-58-generic ...'
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'Ubuntu, with Linux 4.8.0-58-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.8.0-58-generic-recovery-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Loading Linux 4.8.0-58-generic ...'
linux /boot/vmlinuz-4.8.0-58-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-87-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-87-generic-advanced-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Loading Linux 4.4.0-87-generic ...'
linux /boot/vmlinuz-4.4.0-87-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-87-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-87-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-87-generic-init-upstart-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Loading Linux 4.4.0-87-generic ...'
linux /boot/vmlinuz-4.4.0-87-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-87-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-87-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-87-generic-recovery-90a0f248-65ad-4247-b7ba-fb4e9f632905' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 90a0f248-65ad-4247-b7ba-fb4e9f632905
else
search --no-floppy --fs-uuid --set=root 90a0f248-65ad-4247-b7ba-fb4e9f632905
fi
echo 'Loading Linux 4.4.0-87-generic ...'
linux /boot/vmlinuz-4.4.0-87-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-87-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 14.04.5 LTS (14.04) (on /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-a7428baa-93fd-48e8-922d-637da9044d2f' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
linux /vmlinuz root=/dev/sdb1
initrd /initrd.img
}
submenu 'Advanced options for Ubuntu 14.04.5 LTS (14.04) (on /dev/sdb1)' $menuentry_id_option 'osprober-gnulinux-advanced-a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'Ubuntu 14.04.5 LTS (14.04) (on /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--a7428baa-93fd-48e8-922d-637da9044d2f' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
linux /vmlinuz root=/dev/sdb1
initrd /initrd.img
}
menuentry 'Ubuntu 14.04.5 LTS (14.04) (on /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--a7428baa-93fd-48e8-922d-637da9044d2f' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
linux /vmlinuz root=/dev/sdb1
initrd /initrd.img
}
menuentry 'Ubuntu 14.04.5 LTS (14.04) (on /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--a7428baa-93fd-48e8-922d-637da9044d2f' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
linux /vmlinuz root=/dev/sdb1
initrd /initrd.img.old
}
menuentry 'Ubuntu 14.04.5 LTS (14.04) (on /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-87-generic--a7428baa-93fd-48e8-922d-637da9044d2f' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
linux /boot/vmlinuz-4.4.0-87-generic root=/dev/sdb1
initrd /boot/initrd.img-4.4.0-87-generic
}
menuentry 'Ubuntu 14.04.5 LTS (14.04) (on /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-83-generic--a7428baa-93fd-48e8-922d-637da9044d2f' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
linux /boot/vmlinuz-4.4.0-83-generic root=/dev/sdb1
initrd /boot/initrd.img-4.4.0-83-generic
}
menuentry 'Ubuntu 14.04.5 LTS (14.04) (on /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--a7428baa-93fd-48e8-922d-637da9044d2f' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
linux /vmlinuz root=/dev/sdb1
initrd /initrd.img
}
menuentry 'Ubuntu 14.04.5 LTS (14.04) (on /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--a7428baa-93fd-48e8-922d-637da9044d2f' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
linux /vmlinuz root=/dev/sdb1
initrd /initrd.img
}
menuentry 'Ubuntu 14.04.5 LTS (14.04) (on /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--a7428baa-93fd-48e8-922d-637da9044d2f' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
linux /vmlinuz root=/dev/sdb1
initrd /initrd.img.old
}
menuentry 'Ubuntu 14.04.5 LTS (14.04) (on /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz.old--a7428baa-93fd-48e8-922d-637da9044d2f' {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 a7428baa-93fd-48e8-922d-637da9044d2f
else
search --no-floppy --fs-uuid --set=root a7428baa-93fd-48e8-922d-637da9044d2f
fi
linux /vmlinuz.old root=/dev/sdb1
initrd /initrd.img.old
}
}
menuentry 'KDE neon User Edition 5.10 (16.04) (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /vmlinuz root=/dev/sdb3
initrd /initrd.img
}
submenu 'Advanced options for KDE neon User Edition 5.10 (16.04) (on /dev/sdb3)' $menuentry_id_option 'osprober-gnulinux-advanced-5f103eb1-ead4-496a-863c-2439c5f132a8' {
menuentry 'KDE neon User Edition 5.10 (16.04) (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /vmlinuz root=/dev/sdb3
initrd /initrd.img
}
menuentry 'KDE neon User Edition 5.10 (16.04) (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /vmlinuz root=/dev/sdb3
initrd /initrd.img
}
menuentry 'KDE neon User Edition 5.10 (16.04) (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /vmlinuz root=/dev/sdb3
initrd /initrd.img.old
}
menuentry 'KDE neon User Edition 5.10 (16.04) (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.10.0-27-generic--5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /boot/vmlinuz-4.10.0-27-generic root=/dev/sdb3
initrd /boot/initrd.img-4.10.0-27-generic
}
menuentry 'KDE neon User Edition 5.10 (16.04) (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.8.0-58-generic--5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /boot/vmlinuz-4.8.0-58-generic root=/dev/sdb3
initrd /boot/initrd.img-4.8.0-58-generic
}
menuentry 'KDE neon User Edition 5.10 (16.04) (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /vmlinuz root=/dev/sdb3
initrd /initrd.img
}
menuentry 'KDE neon User Edition 5.10 (16.04) (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /vmlinuz root=/dev/sdb3
initrd /initrd.img
}
menuentry 'KDE neon User Edition 5.10 (16.04) (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz--5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /vmlinuz root=/dev/sdb3
initrd /initrd.img.old
}
menuentry 'KDE neon User Edition 5.10 (16.04) (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/vmlinuz.old--5f103eb1-ead4-496a-863c-2439c5f132a8' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 5f103eb1-ead4-496a-863c-2439c5f132a8
else
search --no-floppy --fs-uuid --set=root 5f103eb1-ead4-496a-863c-2439c5f132a8
fi
linux /vmlinuz.old root=/dev/sdb3
initrd /initrd.img.old
}
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# [Ubuntu 16.04] / système sur /dev/sdb2 during installation
UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 / ext4 discard,noatime,errors=remount-ro 0 1
# [/tmp en RAM]
tmpfs /tmp tmpfs defaults 0 0
# [données utilisateurs] /home sur /dev/sdc1
UUID=b19322e6-8a6d-4e24-b87f-4b0155b41963 /home ext4 defaults 0 2
# [/var/log/ sur DD1To sda]
UUID=c5688e8b-2efb-4565-9216-a2040130d951 /var/log ext4 defaults,nosuid,nodev,noatime 0 2
# [partition échange] swap sur /dev/sdc5
UUID=22faac8b-34aa-4425-98a7-184d0613ccff none swap sw 0 0
# [BACKUP] sauvegarde sur /dev/sda1
UUID=006891cb-73bf-49c9-ba36-6d13060aec73 /media/BACKUP ext4 defaults 0 2--------------------------------------------------------------------------------
=================== sdb2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
32.026451111 = 34.388140032 boot/grub/grub.cfg 1
40.391075134 = 43.369586688 boot/grub/i386-pc/core.img 1
30.661113739 = 32.922120192 boot/vmlinuz-4.10.0-27-generic 1
28.781021118 = 30.903386112 boot/vmlinuz-4.4.0-87-generic 1
30.882781982 = 33.160134656 boot/vmlinuz-4.8.0-58-generic 1
28.781021118 = 30.903386112 vmlinuz 1
30.661113739 = 32.922120192 vmlinuz.old 1
31.750972748 = 34.092347392 boot/initrd.img-4.10.0-27-generic 5
32.989631653 = 35.422347264 boot/initrd.img-4.4.0-36-generic.old-dkms 2
24.231819153 = 26.018717696 boot/initrd.img-4.4.0-38-generic.old-dkms 2
34.227535248 = 36.751536128 boot/initrd.img-4.4.0-42-generic.old-dkms 2
25.321285248 = 27.188523008 boot/initrd.img-4.4.0-43-generic.old-dkms 2
31.005264282 = 33.291649024 boot/initrd.img-4.4.0-45-generic.old-dkms 2
46.716239929 = 50.161180672 boot/initrd.img-4.4.0-47-generic.old-dkms 1
46.727535248 = 50.173308928 boot/initrd.img-4.4.0-53-generic.old-dkms 2
46.539733887 = 49.971658752 boot/initrd.img-4.4.0-57-generic.old-dkms 2
35.595905304 = 38.220812288 boot/initrd.img-4.4.0-59-generic.old-dkms 3
36.865711212 = 39.584256000 boot/initrd.img-4.4.0-62-generic.old-dkms 2
36.809776306 = 39.524196352 boot/initrd.img-4.4.0-64-generic.old-dkms 2
36.903522491 = 39.624855552 boot/initrd.img-4.4.0-66-generic.old-dkms 3
36.934783936 = 39.658422272 boot/initrd.img-4.4.0-67-generic.old-dkms 2
34.097732544 = 36.612161536 boot/initrd.img-4.4.0-87-generic 4
32.952877045 = 35.382882304 boot/initrd.img-4.8.0-58-generic 5
34.097732544 = 36.612161536 initrd.img 4
31.750972748 = 34.092347392 initrd.img.old 5
=============================== sdb3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / systeme kde-neon-user-edition sur SSD /dev/sdb3
UUID=5f103eb1-ead4-496a-863c-2439c5f132a8 / ext4 errors=remount-ro 0 1
# /home sur DD /dev/sdc1
UUID=b19322e6-8a6d-4e24-b87f-4b0155b41963 /home ext4 defaults 0 2
# swap was on /dev/sdc5 during installation
UUID=22faac8b-34aa-4425-98a7-184d0613ccff none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb3: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
53.494937897 = 57.439752192 boot/grub/i386-pc/core.img 1
56.071247101 = 60.206043136 boot/vmlinuz-4.10.0-27-generic 1
55.371131897 = 59.454300160 boot/vmlinuz-4.8.0-58-generic 1
56.071247101 = 60.206043136 vmlinuz 1
55.371131897 = 59.454300160 vmlinuz.old 1
78.238674164 = 84.008136704 boot/initrd.img-4.10.0-27-generic 2
75.105564117 = 80.643985408 boot/initrd.img-4.8.0-58-generic 5
78.238674164 = 84.008136704 initrd.img 2
75.105564117 = 80.643985408 initrd.img.old 5
========= Devices which don't seem to have a corresponding hard drive: =========
sdd
ADDITIONAL INFORMATION :
=================== log of boot-info 2017-07-24__17h28 ===================
boot-info version : 4ppa40
boot-sav version : 4ppa40
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa40
boot-info is executed in installed-session (Ubuntu 16.04.2 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash vt.handoff=7
Partition 2 does not start on physical sector boundary.
=================== os-prober:
/dev/sdb2:L'OS actuellement utilisé - Ubuntu 16.04.2 LTS CurrentSession:linux
/dev/sdb1:Ubuntu 14.04.5 LTS (14.04):Ubuntu:linux
/dev/sdb3:KDE neon User Edition 5.10 (16.04):neon:linux
=================== blkid:
/dev/sda1: LABEL="BACKUP" UUID="006891cb-73bf-49c9-ba36-6d13060aec73" TYPE="ext4" PARTUUID="cdd74f3b-01"
/dev/sda2: LABEL="LOGS" UUID="c5688e8b-2efb-4565-9216-a2040130d951" TYPE="ext4" PARTUUID="cdd74f3b-02"
/dev/sdb1: LABEL="Ubuntu14.04" UUID="a7428baa-93fd-48e8-922d-637da9044d2f" TYPE="ext4" PARTUUID="00019478-01"
/dev/sdb2: LABEL="Ubuntu16.04" UUID="90a0f248-65ad-4247-b7ba-fb4e9f632905" TYPE="ext4" PTTYPE="dos" PARTUUID="00019478-02"
/dev/sdb3: LABEL="KDE-Neon" UUID="5f103eb1-ead4-496a-863c-2439c5f132a8" TYPE="ext4" PARTUUID="00019478-03"
/dev/sdc1: LABEL="DATA" UUID="b19322e6-8a6d-4e24-b87f-4b0155b41963" TYPE="ext4" PARTUUID="0002bf49-01"
/dev/sdc5: UUID="22faac8b-34aa-4425-98a7-184d0613ccff" TYPE="swap" PARTUUID="0002bf49-05"
1 disks with OS, 3 OS : 3 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Partition 2 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juil. 24 17:09 grub.d
drwxr-xr-x 2 root root 4096 juil. 24 17:08 grub.d.bak
total 76
-rwxr-xr-x 1 root root 9791 mai 20 22:27 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 mai 20 22:27 10_linux
-rwxr-xr-x 1 root root 11082 mai 20 22:27 20_linux_xen
-rwxr-xr-x 1 root root 11692 mai 20 22:27 30_os-prober
-rwxr-xr-x 1 root root 1418 mai 20 22:27 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 20 22:27 40_custom
-rwxr-xr-x 1 root root 216 mai 20 22:27 41_custom
-rw-r--r-- 1 root root 483 mai 20 22:27 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sdb1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juil. 24 15:44 grub.d
total 4
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
=================== sdb3/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juil. 24 15:35 grub.d
total 4
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sdb2 : sdb, not-sepboot, grubenv-ok grub2, signed grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, .
sda1 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /media/BACKUP.
sda2 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /var/log.
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, nogrubinstall, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, /mnt/boot-sav/sdb1.
sdb3 : sdb, not-sepboot, no-grubenv nogrub, signed , no-update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, nogrubinstall, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, /mnt/boot-sav/sdb3.
sdc1 : sdc, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /home.
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 63 sectors * 512 bytes
sdc : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA Hitachi HDS72101 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 32.3kB 999GB 999GB primary ext4
2 999GB 1000GB 1072MB primary ext4
Model: ATA Samsung SSD 840 (scsi)
Disk /dev/sdb: 120GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 25.7GB 25.7GB primary ext4
2 25.7GB 54.7GB 29.0GB primary ext4 boot
3 54.7GB 87.3GB 32.7GB primary ext4
Model: ATA WDC WD10EZEX-00B (scsi)
Disk /dev/sdc: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 999GB 999GB primary ext4
2 999GB 1000GB 779MB extended
5 999GB 1000GB 779MB logical linux-swap(v1)
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:512:msdos:ATA Hitachi HDS72101:;
1:32.3kB:999GB:999GB:ext4::;
2:999GB:1000GB:1072MB:ext4::;
BYT;
/dev/sdb:120GB:scsi:512:512:msdos:ATA Samsung SSD 840:;
1:1049kB:25.7GB:25.7GB:ext4::;
2:25.7GB:54.7GB:29.0GB:ext4::boot;
3:54.7GB:87.3GB:32.7GB:ext4::;
BYT;
/dev/sdc:1000GB:scsi:512:4096:msdos:ATA WDC WD10EZEX-00B:;
1:1049kB:999GB:999GB:ext4::;
2:999GB:1000GB:779MB:::;
5:999GB:1000GB:779MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sdb disk 111,8G
sdb2 part ext4 27G Ubuntu16.04
sdb3 part ext4 30,5G KDE-Neon
sdb1 part ext4 23,9G Ubuntu14.04
sr0 rom 1024M
sdc disk 931,5G
sdc2 part 1K
sdc5 part swap 743M
sdc1 part ext4 930,8G DATA
sda disk 931,5G
sda2 part ext4 1022M LOGS
sda1 part ext4 930,5G BACKUP
KNAME ROTA RO RM STATE MOUNTPOINT
sdb 0 0 0 running
sdb2 0 0 0 /
sdb3 0 0 0 /mnt/boot-sav/sdb3
sdb1 0 0 0 /mnt/boot-sav/sdb1
sr0 1 0 1 running
sdc 1 0 0 running
sdc2 1 0 0
sdc5 1 0 0 [SWAP]
sdc1 1 0 0 /home
sda 1 0 0 running
sda2 1 0 0 /var/log
sda1 1 0 0 /media/BACKUP
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=8127144k,nr_inodes=2031786,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=1629908k,mode=755)
/dev/sdb2 on / type ext4 (rw,noatime,discard,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=31,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=463)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,relatime)
/dev/sda2 on /var/log type ext4 (rw,nosuid,nodev,noatime,data=ordered)
/dev/sda1 on /media/BACKUP type ext4 (rw,relatime,data=ordered)
/dev/sdc1 on /home type ext4 (rw,relatime,data=ordered)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=1629908k,mode=700,uid=1000,gid=1002)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1002)
/dev/sdb1 on /mnt/boot-sav/sdb1 type ext4 (rw,relatime,data=ordered)
/dev/sdb3 on /mnt/boot-sav/sdb3 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb2 sdb3 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdc1 sdc2 sdc5 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 initctl input kmsg kvm lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sdb sdb1 sdb2 sdb3 sdc sdc1 sdc2 sdc5 sdd sg0 sg1 sg2 sg3 sg4 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type
Partition 2 does not start on physical sector boundary.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 7.8G 0 7.8G 0% /dev
tmpfs tmpfs 1.6G 9.5M 1.6G 1% /run
/dev/sdb2 ext4 27G 9.7G 16G 39% /
tmpfs tmpfs 7.8G 232K 7.8G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 7.8G 0 7.8G 0% /sys/fs/cgroup
tmpfs tmpfs 7.8G 1.4M 7.8G 1% /tmp
/dev/sda2 ext4 990M 49M 875M 6% /var/log
/dev/sda1 ext4 916G 714G 156G 83% /media/BACKUP
/dev/sdc1 ext4 917G 410G 460G 48% /home
tmpfs tmpfs 1.6G 84K 1.6G 1% /run/user/1000
/dev/sdb1 ext4 24G 9.4G 13G 43% /mnt/boot-sav/sdb1
/dev/sdb3 ext4 30G 6.3G 23G 23% /mnt/boot-sav/sdb3
=================== fdisk -l:
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xcdd74f3b
Device Boot Start End Sectors Size Id Type
/dev/sda1 63 1951430655 1951430593 930.5G 83 Linux
/dev/sda2 1951430656 1953523711 2093056 1022M 83 Linux
Disk /dev/sdb: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00019478
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 50120703 50118656 23.9G 83 Linux
/dev/sdb2 * 50120704 106761328 56640625 27G 83 Linux
/dev/sdb3 106762240 170602495 63840256 30.5G 83 Linux
Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x0002bf49
Device Boot Start End Sectors Size Id Type
/dev/sdc1 2048 1951999999 1951997952 930.8G 83 Linux
/dev/sdc2 1952002046 1953523711 1521666 743M 5 Extended
/dev/sdc5 1952002048 1953523711 1521664 743M 82 Linux swap / Solaris
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to) and reinstall the grub2 of sdb2 into the MBRs of all disks (except USB without OS).
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sdb (120GB) !
=================== User settings
The settings chosen by the user will not act on the boot.Soit un seul /boot/grub/grub.cfg celui de sdb2 et pas de doublon dans les menuentry - restera peut-être à fignoler pour mieux les distinguer.
Et au démarrage du pc la ligne 0 est bien Ubuntu "tout court" qui lance la 16.04, les lignes suivantes sont celles de l'os_prober soit 14.04 et kde neon.
Je passe en résolu ! Merci Babdu et Moko - encore une fois - votre patience face à ma tête brulée pas toujours logique est remarquablement éducative et pédagogique !
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#65 Le 24/07/2017, à 17:05
- Babdu89
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
J'ai édité mon post#63...
Je ne sais plus quoi dire à la lecture du dernier boot info.
Qu'est-ce que tu as été bricoler avec Boot-Repair? il ne m'a jamais fait ceci!!!
Post#57;
On lui demande de réinstaller Grub dans la partition /sdb2, en mettant la première partie de Grub dans le secteur de boot de /sdb ...
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v2.00) is installed in the boot sector of sdb2
and looks at sector 82865648 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos2)/boot/grub. It also embeds following
components:
modules
-------------------------------------------------------
fshelp ext2 part_msdos biosdisk
-------------------------------------------------------
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.imgIl a réinstaller Grub dans /sdb2, en mettant Grub première partie dans le secteur de boot de la partition d'installation de la 16.04 /sdb2 , pas dans /sdb!!! ...
Je relis le post ci-dessus, pour essayer de comprendre.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#66 Le 24/07/2017, à 17:18
- Babdu89
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Oui, les doublon dans la 14.04 on les voit dans le grep menuentry.
menuentry 'Ubuntu, avec Linux 4.4.0-87-generic (sur /dev/sdb2) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-87-generic--a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'Ubuntu, with Linux 4.4.0-87-generic (upstart) (sur /dev/sdb2) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-87-generic--a7428baa-93fd-48e8-922d-637da9044d2f' {
menuentry 'Ubuntu, with Linux 4.4.0-87-generic (recovery mode) (sur /dev/sdb2) (sur /dev/sdb1)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-4.4.0-87-generic-root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro recovery nomodeset-a7428baa-93fd-48e8-922d-637da9044d2f' {
Tu n'avais pas désactiver le script Os prober dans la 14.04 (/sdb1) et la 16.04 (/sdb2).
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#67 Le 24/07/2017, à 17:37
- Babdu89
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Maintenant oui : didiou… je crois que je suis arrivé à mes fins… et au final ça ressemble davantage à la solution de Moko je crois bien.
solution de Rufus indiquée par moko ...
Soit un seul /boot/grub/grub.cfg celui de sdb2 et pas de doublon dans les menuentry - restera peut-être à fignoler pour mieux les distinguer.
En espérant que dans un avenir, tu ne supprimeras pas la 16.04, avant d'avoir réinstaller Grub convenablement, dans la Neon, ou 14.04. Car plus rien ne redémarrera.
Enfin, tu pourras encore t'en sortir avec une session live où tu auras installé Boot-Repair, à condition de pouvoir faire un média live ...
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#68 Le 24/07/2017, à 18:12
- Coeur Noir
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
J'ai toujours des media live à portée de main ;-)
À priori c'est la 14.04 que je supprimerai dans un avenir plus ou moins proche.
Quant aux noyaux de la 16.04, il y en a trois, un 4.4, un 4.8, un 4.10 effectivement. C'est ce que « garde » apt autoremove --purge
Dernière modification par Coeur Noir (Le 24/07/2017, à 18:16)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#69 Le 24/07/2017, à 21:31
- Coeur Noir
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Et donc pour épiloguer :
- je viens d'installer elementary à la place anciennement occupée par ubuntu 14.04.
- pendant l'install' ai spécifié sdb comme destination pour le démarrage.
- au reboot du pc, suis accueilli par le grub d'elementary ( fond noir ) placé par défaut sur elementary.
- je laisse faire, dans elementary je purge grub* et /boot/grub/grub.cfg
- reboot, c'est toujours le même grub qui m'accueille mais je lance la 16.04
- là je lance en sudo os-prober update-grub grub-install sdb
- reboot, c'est bien le grub ubuntu ( fond violet ) qui m'accueille prêt à lancer la 16.04, avec elementary et neon comme autre choix possible.
→ impeccable !
Seule réserve qui concerne les options avancées des non-16.04 : les noyaux ne sont pas mentionnés.
Dernière modification par Coeur Noir (Le 24/07/2017, à 21:34)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#70 Le 24/07/2017, à 23:29
- Babdu89
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Seule réserve qui concerne les options avancées des non-16.04 : les noyaux ne sont pas mentionnés.
Ben oui, comme il n'y a plus de grub.cfg dans ces Os; les lignes
linux /vmlinuz root=/dev/sdb1
initrd /initrd.imglinux /vmlinuz root=/dev/sdb3
initrd /initrd.imgNe peuvent plus avoir de version noyau annoncées, comme dans la 16.04
linux /boot/vmlinuz-4.10.0-27-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.10.0-27-genericEst-ce que çà démarre quand même ces Os en recovery mode?.
@+. Babdu89 .
Dernière modification par Babdu89 (Le 24/07/2017, à 23:30)
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#71 Le 25/07/2017, à 00:41
- Coeur Noir
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Euh, oui apparemment, enfin, une fois démarré dessus comment je sais que je suis bien en recovery mode ? Là tout me paraît normal depuis la dernière ligne dans options avancées d'elementray ( pas d'affichage dégradé… )
auto-réponse : j'ai bien démarré sur le noyau précédent
e-coeurnoir@ASGARD:~$ uname -a
Linux ASGARD 4.8.0-52-generic #55~16.04.1-Ubuntu SMP Fri Apr 28 14:36:29 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
e-coeurnoir@ASGARD:~$ Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#72 Le 25/07/2017, à 10:37
- Babdu89
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Bonjour.
Démarrage en mode recovery, il n'y a pas affichage de l'animation plymouth, il n'y a que du texte qui défile, puis l'affichage d'un panneau, qui permet de choisir dans des options pour vérifier, réparer, ou pour continuer le chargement des Os.
Tu as vu çà ?
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#73 Le 26/07/2017, à 16:38
- Coeur Noir
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Bien vu Babdu, effectivement je n'ai pas les recovery sous elementary et kde, seulement le choix entre les noyaux ( c'est os_prober qui les liste je suppose ? ).
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#74 Le 26/07/2017, à 21:00
- Babdu89
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Bonsoir.
( c'est os_prober qui les liste je suppose ? ).
Je ne sais/pense pas, mais c'est dans le contenu de la rubrique "30_os-prober" du grub.cfg de l'Os par défaut au démarrage, la 16.04 . Et c'est reporté dans ce grub.cfg, depuis les grub.cfg rubrique ### BEGIN et END /etc/grub.d/10_linux ### des Néon et Elementary
Mais comme la purge des Grub des Néon et Elementary, supprime les grub.cfg de ces Os...
Tu dois comprendre ce qu'il se passe. Çà n'empêche pas de trouver les noyaux des Néon et Elementary pour démarrer, mais on n'a plus le mode recovery accessible pour ces Os.
Ne plus pouvoir démarrer un Os en mode recovery depuis le menu Grub de l'Os par défaut au démarrage en cas de souci. Pour moi, c'est encore un motif supplémentaire, pour préférer la désactivation des scripts 30_os-prober des Os qui ne sont pas l'os par défaut au démarrage. On ne perd pas cette faculté.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#75 Le 26/07/2017, à 22:39
- Coeur Noir
Re : [résolu] KDE (neon user edition) : grub chétif et grub en multiboot
Je vais continuer mes bidouilles ;-) mais oui ça paraît risqué de ne plus accéder au recovery, je vais probablement réinstaller les grub, en concluant par la 16.04…
Sinon il s'agirait de ne laisser que la partie concernant le recovery dans les grub.cfg, à priori ? Mais bon ça devient un peu chiant à maintenir…
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne