#1 Le 13/06/2017, à 15:58
- Xillis
Système lent
Bonjour,
Je vient d'installer la version 14.05 mais le système est lent. Tout rame et le processeur chauffe alors que je possède 1OO Giga d'espace disque, un processeur de 1.73 Gigahertz et 2 Giga de RAM.
Il y a un bug qui été trouvé et j'ai suivi ce tuto ---> https://forum.ubuntu-fr.org/viewtopic.php?id=241092
Malgré tout, il n'est pas plus performant. Mon PC est un Dell Latitude D610
Merci
[ Lien commercial modéré ]
Hors ligne
#2 Le 13/06/2017, à 16:24
- Caribou22
Re : Système lent
Bonjour 
Peux-tu nous fournir un rapport bisnext ?
Hors ligne
#3 Le 13/06/2017, à 18:16
- Xillis
Hors ligne
#4 Le 13/06/2017, à 18:32
- xubu1957
Re : Système lent
Bonjour,
Le rapport :
Posting 971331 from bn-497ef posted at 2017-06-13 16:14:17 expires: 2017-07-13 16:14:17
Jun 13, 2017, bisnext report id 497ef
bisnext 0.03
============================ Hardware and System Summary ======================
System: Kernel: 3.16.0-77-generic i686 (32 bit gcc: 4.8.4)
Desktop: Xfce 4.11.8 (Gtk 2.24.23) dm: lightdm
Distro: Ubuntu 14.04.5 LTS
Machine: Device: portable System: Dell product: Latitude D610
Mobo: Dell model: 0M7181 BIOS: Dell v: A06 date: 10/02/2005
Chassis: type: 8
Battery BAT0: charge: 47.0 Wh 795.3% condition: 5.9/47.0 Wh (13%)
volts: 12.4/11.1
model: Panasonic DELL 4M010 status: Full
CPU: Single core Intel Pentium M (-UP-) cache: 2048 KB
flags: (nx pae sse sse2) bmips: 3457 speed/min/max: 1733/800/1733 MHz
Memory: Array-1 capacity: 4 GB devices: 2 EC: None
Device-1: DIMM_A size: 1 GB speed: 667 MHz type: DDR
manufacturer: 7F7F7F7F7F9B0000 part: N/A
Device-2: DIMM_B size: 1 GB speed: 667 MHz type: DDR
manufacturer: 7F7F7F7F7F9B0000 part: N/A
Device-3: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Device-4: N/A size: N/A speed: N/A type: N/A
manufacturer: N/A part: N/A
Graphics: Card: Advanced Micro Devices [AMD/ATI] RV370/M22 [Mobility Radeon X300]
bus-ID: 01:00.0 chip-ID: 1002:5460
Display Server: X.Org 1.16.0 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
Resolution: 1400x1050@60.0hz
GLX Renderer: Gallium 0.4 on ATI RV370
GLX Version: 2.1 Direct Rendering: Yes
Audio: Card Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller
driver: snd_intel8x0 ports: ed00 ec40 bus-ID: 00:1e.2 chip-ID: 8086:266e
Sound: Advanced Linux Sound Architecture v: k3.16.0-77-generic
Network: Card-1: Broadcom NetXtreme BCM5751 Gigabit Ethernet PCI Express
driver: tg3 v: 3.137 bus-ID: 02:00.0 chip-ID: 14e4:1677
IF: eth0 state: down mac: <filter>
Card-2: Broadcom BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
driver: b43-pci-bridge bus-ID: 03:03.0 chip-ID: 14e4:4318
IF: wlan0 state: up mac: <filter>
Drives: HDD Total Size: 120.0GB (5.5% used)
ID-1: /dev/sda model: Hitachi_HTS54161 size: 120.0GB
Optical-1: /dev/sr0 model: TSST CDRW/DVD TSL462C
rev: DE01 dev-links: cdrom
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw state: running
Partition: ID-1: / size: 108G used: 4.3G (5%) fs: ext4 dev: /dev/sda1
label: N/A uuid: 613c1cd7-d849-4fb3-916a-935a09091052
ID-2: swap-1 size: 2.14GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
label: N/A uuid: d5c8e606-0dbf-423a-900a-c16907c03e4c
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://fr.archive.ubuntu.com/ubuntu/ trusty main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-updates main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ trusty universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty universe
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-updates universe
deb http://fr.archive.ubuntu.com/ubuntu/ trusty multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-updates multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu trusty-security main restricted
deb-src http://security.ubuntu.com/ubuntu trusty-security main restricted
deb http://security.ubuntu.com/ubuntu trusty-security universe
deb-src http://security.ubuntu.com/ubuntu trusty-security universe
deb http://security.ubuntu.com/ubuntu trusty-security multiverse
deb-src http://security.ubuntu.com/ubuntu trusty-security multiverse
deb http://extras.ubuntu.com/ubuntu trusty main
deb-src http://extras.ubuntu.com/ubuntu trusty main
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 14.8% command: firefox pid: 2209 mem: 229.04MB (11.3%)
2: cpu: 11.5% command: ubuntu-sso-login (started by: python) pid: 3448 mem: 15.98MB (0.7%)
3: cpu: 9.3% command: oneconf-service (started by: python3) pid: 3062 mem: 24.95MB (1.2%)
4: cpu: 1.4% command: X pid: 1066 mem: 52.82MB (2.6%)
5: cpu: 0.5% command: sudo pid: 3086 mem: 3.84MB (0.1%)
6: cpu: 0.5% command: xfce4-terminal pid: 2299 mem: 25.73MB (1.2%)
7: cpu: 0.4% command: bash pid: 3088 mem: 4.02MB (0.1%)
8: cpu: 0.3% command: bash pid: 3072 mem: 4.50MB (0.2%)
9: cpu: 0.3% command: init pid: 1 mem: 3.55MB (0.1%)
10: cpu: 0.1% command: nm-applet pid: 1910 mem: 25.79MB (1.2%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 229.04MB (11.3%) command: firefox pid: 2209 cpu: 14.8%
2: mem: 52.82MB (2.6%) command: X pid: 1066 cpu: 1.4%
3: mem: 36.57MB (1.8%) command: xfdesktop pid: 1876 cpu: 0.1%
4: mem: 36.25MB (1.7%) command: blueman-applet (started by: python) pid: 1928 cpu: 0.0%
5: mem: 32.01MB (1.5%) command: libwhiskermenu.so (started by: wrapper-1.0) pid: 1959 cpu: 0.0%
6: mem: 28.10MB (1.3%) command: libindicator-plugin.so (started by: wrapper-2.0) pid: 1963 cpu: 0.0%
7: mem: 25.79MB (1.2%) command: nm-applet pid: 1910 cpu: 0.1%
8: mem: 25.73MB (1.2%) command: xfce4-terminal pid: 2299 cpu: 0.5%
9: mem: 24.95MB (1.2%) command: oneconf-service (started by: python3) pid: 3062 cpu: 9.3%
10: mem: 18.08MB (0.8%) command: applet.py (started by: python) pid: 1917 cpu: 0.0%
Info: Processes: 151 Uptime: 10 min Memory: 377.5/2019.3MB
Init: Upstart v: 1.12.1 runlevel: 2 default: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.111 running in bash) inxi: 2.3.20
_______________________________ UEFI settings _________________________________
Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
None
_____________________________ md5sum of EFI files _____________________________
None
========================= Boot Information Details ============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location. It also
embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
(,msdos1)/boot/grub
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.5 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 têtes, 63 secteurs/piste, 14593 cylindres, total 234441648 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 230,250,495 230,248,448 83 Linux
/dev/sda2 230,252,542 234,440,703 4,188,162 5 Extended
/dev/sda5 230,252,544 234,440,703 4,188,160 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 613c1cd7-d849-4fb3-916a-935a09091052 ext4
/dev/sda5 d5c8e606-0dbf-423a-900a-c16907c03e4c swap
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 juin 13 18:03 ata-Hitachi_HTS541612J9AT00_SB0D42E4CVTYAH -> ../../sda
lrwxrwxrwx 1 root root 10 juin 13 18:03 ata-Hitachi_HTS541612J9AT00_SB0D42E4CVTYAH-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juin 13 18:03 ata-Hitachi_HTS541612J9AT00_SB0D42E4CVTYAH-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 juin 13 18:03 ata-Hitachi_HTS541612J9AT00_SB0D42E4CVTYAH-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 juin 13 18:03 ata-TSSTcorpCD-RW_DVD-ROM_TSL462C -> ../../sr0
lrwxrwxrwx 1 root root 9 juin 13 18:03 wwn-0x5000cca524cc2f4b -> ../../sda
lrwxrwxrwx 1 root root 10 juin 13 18:03 wwn-0x5000cca524cc2f4b-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juin 13 18:03 wwn-0x5000cca524cc2f4b-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 juin 13 18:03 wwn-0x5000cca524cc2f4b-part5 -> ../../sda5
_________________________ "ls -R /dev/mapper/" output _________________________
None
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,errors=remount-ro)
__________________________=== Boot Files Content ===___________________________
___________________________ sda1/boot/grub/grub.cfg: ___________________________
File size: 9026, Line count: 269, Menu entries (sub entries included) : 7
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-613c1cd7-d849-4fb3-916a-935a09091052' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 613c1cd7-d849-4fb3-916a-935a09091052
else
search --no-floppy --fs-uuid --set=root 613c1cd7-d849-4fb3-916a-935a09091052
fi
linux /boot/vmlinuz-3.16.0-77-generic root=UUID=613c1cd7-d849-4fb3-916a-935a09091052 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.16.0-77-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 613c1cd7-d849-4fb3-916a-935a09091052
else
search --no-floppy --fs-uuid --set=root 613c1cd7-d849-4fb3-916a-935a09091052
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 613c1cd7-d849-4fb3-916a-935a09091052
else
search --no-floppy --fs-uuid --set=root 613c1cd7-d849-4fb3-916a-935a09091052
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda1/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=613c1cd7-d849-4fb3-916a-935a09091052 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=d5c8e606-0dbf-423a-900a-c16907c03e4c none swap sw 0 0
____________________________ sda1/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-3.16.0-77-generic root=UUID=613c1cd7-d849-4fb3-916a-935a09091052 ro quiet splash vt.handoff=7
_________________________ RAM usage & Free disk space _________________________
total used free shared buffers cached
Mem: 2.0G 832M 1.2G 19M 48M 403M
-/+ buffers/cache: 381M 1.6G
Swap: 2.0G 0B 2.0G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/sda1 / ext4 108G 4.3G 99G 5% 3%
Swap partition for hibernation : UUID=d5c8e606-0dbf-423a-900a-c16907c03e4c
_________________________________ USB devices __________________________________
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 1c4f:0034 SiGma Micro
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
_______________________________ Wireless Status _______________________________
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
___________________________________ Modules Loaded ____________________________
Module Size Used by
6lowpan_iphc 18262 1 bluetooth
ac97_bus 12642 1 snd_ac97_codec
ahci 29782 0
arc4 12536 2
b43 369555 0
bcma 46331 1 b43
bluetooth 391253 10 bnep,rfcomm
bnep 18895 2
btrfs 888461 0
ccm 17496 1
cfg80211 431128 2 b43,mac80211
crc_ccitt 12627 1 irda
ctr 12905 1
dcdbas 14448 1 dell_laptop
dell_laptop 17970 0
drm 255504 6 ttm,drm_kms_helper,radeon
drm_kms_helper 55007 1 radeon
gpio_ich 13315 0
hfs 49390 0
hfsplus 93074 0
hid 95946 2 hid_generic,usbhid
hid_generic 12503 0
i2c_algo_bit 13197 1 radeon
irda 107386 0
jfs 170051 0
joydev 17113 0
libahci 31066 1 ahci
libcrc32c 12543 1 xfs
lp 13299 0
lpc_ich 16877 0
mac80211 571376 1 b43
mac_hid 13059 0
minix 31317 0
msdos 17093 0
ntfs 95670 0
parport 40836 3 lp,ppdev,parport_pc
parport_pc 32021 1
pata_acpi 12901 0
pcmcia 51828 0
pcmcia_core 22328 3 pcmcia,pcmcia_rsrc,yenta_socket
pcmcia_rsrc 18319 1 yenta_socket
ppdev 17391 0
pps_core 18799 1 ptp
psmouse 99602 0
ptp 18861 1 tg3
qnx4 13099 0
radeon 1320810 3
raid6_pq 97455 1 btrfs
rfcomm 58045 4
serio_raw 13251 0
shpchp 32143 0
snd 66670 11 snd_ac97_codec,snd_intel8x0,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_device
snd_ac97_codec 105860 1 snd_intel8x0
snd_intel8x0 37321 2
snd_pcm 87194 2 snd_ac97_codec,snd_intel8x0
snd_rawmidi 26131 1 snd_seq_midi
snd_seq 56192 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 14137 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 13324 0
snd_seq_midi_event 14475 1 snd_seq_midi
snd_timer 28647 2 snd_pcm,snd_seq
soundcore 14599 1 snd
ssb 51835 1 b43
tg3 156360 0
ttm 85257 1 radeon
ufs 73656 0
usbhid 47035 0
video 19475 0
xfs 816616 0
xor 26221 1 btrfs
yenta_socket 40215 0
______________________________ Additional Drivers _____________________________
== /sys/devices/pci0000:00/0000:00:1e.0/0000:03:03.0 ==
modalias : pci:v000014E4d00004318sv00001028sd00000005bc02sc80i00
model : Wireless 1370 WLAN Mini-PCI Card
vendor : Broadcom Corporation
driver : bcmwl-kernel-source - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=
/etc/default/locale:
LANG="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr
variant: latin9
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""
_____________________________ Upgradable Packages _____________________________
gir1.2-gtk-3.0 3.10.8-0ubuntu1.6 from:3.10.8-0ubuntu1.4
libgail-3-0 3.10.8-0ubuntu1.6 from:3.10.8-0ubuntu1.4
libgtk-3-0 3.10.8-0ubuntu1.6 from:3.10.8-0ubuntu1.4
libgtk-3-bin 3.10.8-0ubuntu1.6 from:3.10.8-0ubuntu1.4
libgtk-3-common 3.10.8-0ubuntu1.6 from:3.10.8-0ubuntu1.4
libmm-glib0 1.0.0-2ubuntu1.1 from:1.0.0-2ubuntu1
libnautilus-extension1a 1:3.10.1-0ubuntu9.11 from:1:3.10.1-0ubuntu9.6
modemmanager 1.0.0-2ubuntu1.1 from:1.0.0-2ubuntu1
nautilus-data 1:3.10.1-0ubuntu9.11 from:1:3.10.1-0ubuntu9.6
oneconf 0.3.7.14.04.1 from:0.3.7
oneconf-common 0.3.7.14.04.1 from:0.3.7
python-oneconf 0.3.7.14.04.1 from:0.3.7
python3-oneconf 0.3.7.14.04.1 from:0.3.7
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
libntdb1 python-ntdb
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 13 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic-lts-utopic 3.16.0.77.68
linux-headers-3.16.0-30 3.16.0-30.40~14.04.1
linux-headers-3.16.0-30-generic 3.16.0-30.40~14.04.1
linux-headers-3.16.0-77 3.16.0-77.99~14.04.1
linux-headers-3.16.0-77-generic 3.16.0-77.99~14.04.1
linux-headers-generic-lts-utopic 3.16.0.77.68
linux-image-3.16.0-30-generic 3.16.0-30.40~14.04.1
linux-image-3.16.0-77-generic 3.16.0-77.99~14.04.1
linux-image-extra-3.16.0-30-generic 3.16.0-30.40~14.04.1
linux-image-extra-3.16.0-77-generic 3.16.0-77.99~14.04.1
linux-image-generic-lts-utopic 3.16.0.77.68
Files in /boot directory:
abi-3.16.0-30-generic
abi-3.16.0-77-generic
config-3.16.0-30-generic
config-3.16.0-77-generic
grub
initrd.img-3.16.0-30-generic
initrd.img-3.16.0-77-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-3.16.0-30-generic
System.map-3.16.0-77-generic
vmlinuz-3.16.0-30-generic
vmlinuz-3.16.0-77-generic
_________________________________ System Logs ________________________________
Selection of relevent log entries:
[ 0.109221] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.109227] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.109290] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.149813] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.183188] SCSI subsystem initialized
[ 0.853971] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.177679] scsi0 : ata_piix
[ 1.177831] scsi1 : ata_piix
[ 1.177919] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 1.177922] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 1.361432] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 A70H PQ: 0 ANSI: 5
[ 1.361764] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.361870] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.393671] scsi 1:0:0:0: CD-ROM TSSTcorp CDRW/DVD TSL462C DE01 PQ: 0 ANSI: 5
[ 1.409040] sr0: scsi3-mmc drive: 10x/24x writer cd/rw xa/form2 cdda tray
[ 1.409224] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.409311] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.411061] sd 0:0:0:0: [sda] Attached SCSI disk
[ 17.603461] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 17.757371] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 18.576721] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[ 18.886255] b43-phy0 warning: 5 GHz band is unsupported on this PHY
[ 22.500041] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 24.888714] wlan0: RX AssocResp from 40:c7:29:e3:98:4c (capab=0x431 status=0 aid=3)
[ 25.005509] wlan0: RX AssocResp from 40:c7:29:e3:98:4c (capab=0x431 status=0 aid=3)
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SIGMACHIP Usb Mouse id=9 [slave pointer (2)]
⎜ ↳ AlpsPS/2 ALPS DualPoint TouchPad id=11 [slave pointer (2)]
⎜ ↳ DualPoint Stick id=12 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Video Bus id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ Sleep Button id=8 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=10 [slave keyboard (3)]
xrandr:
Screen 0: minimum 320 x 200, current 1400 x 1050, maximum 4096 x 4096
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-0 disconnected (normal left inverted right x axis y axis)
LVDS connected 1400x1050+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1400x1050 60.0*+
1280x1024 59.9
1280x960 59.9
1280x854 59.9
1280x800 59.8
1280x720 59.9
1152x768 59.8
1024x768 59.9
800x600 59.9
848x480 59.7
720x480 59.7
640x480 59.4
S-video disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28.216] (==) No Layout section. Using the first Screen section.
[ 28.216] (==) No screen section available. Using defaults.
[ 28.217] (**) |-->Screen "Default Screen Section" (0)
[ 28.217] (**) | |-->Monitor "<default monitor>"
[ 28.217] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 28.219] (--) PCI:*(0:1:0:0) 1002:5460:1028:2006 rev 0, Mem @ 0xd0000000/134217728, 0xdfdf0000/65536, I/O @ 0x0000de00/256, BIOS @ 0x????????/131072
[ 28.219] (II) LoadModule: "glx"
[ 28.482] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 29.246] (II) LoadModule: "fglrx"
[ 29.246] (WW) Warning, couldn't open module fglrx
[ 29.246] (II) UnloadModule: "fglrx"
[ 29.246] (EE) Failed to load module "fglrx" (module does not exist, 0)
[ 29.247] (II) LoadModule: "ati"
[ 29.247] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 29.247] (II) LoadModule: "radeon"
[ 29.247] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 29.306] (II) LoadModule: "modesetting"
[ 29.306] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 29.307] (II) LoadModule: "fbdev"
[ 29.307] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 29.307] (II) LoadModule: "vesa"
[ 29.307] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 29.308] (II) LoadModule: "fglrx"
[ 29.308] (WW) Warning, couldn't open module fglrx
[ 29.308] (II) UnloadModule: "fglrx"
[ 29.308] (EE) Failed to load module "fglrx" (module does not exist, 0)
[ 29.308] (II) LoadModule: "ati"
[ 29.309] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 29.309] (II) LoadModule: "modesetting"
[ 29.309] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 29.309] (II) UnloadModule: "modesetting"
[ 29.309] (II) LoadModule: "fbdev"
[ 29.310] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 29.310] (II) UnloadModule: "fbdev"
[ 29.310] (II) LoadModule: "vesa"
[ 29.310] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 29.310] (II) UnloadModule: "vesa"
[ 29.325] (WW) Falling back to old probe method for modesetting
[ 29.325] (WW) Falling back to old probe method for fbdev
[ 29.325] (II) Loading sub module "fbdevhw"
[ 29.325] (II) LoadModule: "fbdevhw"
[ 29.326] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 29.326] (WW) Falling back to old probe method for vesa
[ 29.326] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 29.326] (II) Loading sub module "dri2"
[ 29.326] (II) LoadModule: "dri2"
[ 29.326] (II) Loading sub module "exa"
[ 29.326] (II) LoadModule: "exa"
[ 29.326] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 29.330] (II) RADEON(0): Output VGA-0 has no monitor section
[ 29.400] (II) RADEON(0): Output DVI-0 has no monitor section
[ 29.402] (II) RADEON(0): Output LVDS has no monitor section
[ 29.412] (II) RADEON(0): Output S-video has no monitor section
[ 29.499] (II) Loading sub module "fb"
[ 29.499] (II) LoadModule: "fb"
[ 29.499] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.499] (II) Loading sub module "ramdac"
[ 29.499] (II) LoadModule: "ramdac"
[ 29.499] (II) UnloadModule: "modesetting"
[ 29.499] (II) UnloadModule: "fbdev"
[ 29.500] (II) UnloadModule: "vesa"
[ 29.500] (II) EXA(0): Driver allocated offscreen pixmaps
[ 29.500] (II) UploadToScreen
[ 29.500] (II) DownloadFromScreen
[ 29.656] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 29.693] (II) RADEON(0): Setting screen physical size to 370 x 277
[ 29.712] (II) LoadModule: "evdev"
[ 29.712] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.746] (II) LoadModule: "synaptics"
[ 29.746] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/3.16.0-77-generic/updates/dkms
Looking for nvidia modules in /lib/modules/3.16.0-77-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? no
Is radeon loaded? yes
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Detected LTS < 14.04.5. Forcing Intel/SNA
Vendor/Device Id: 1002:5460
BusID "PCI:1@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "radeon"
Found "/dev/dri/card0", driven by "radeon"
output 0:
card0-LVDS-1
Number of connected outputs for /dev/dri/card0: 1
Skipping "/dev/dri/card0", driven by "radeon"
Skipping "/dev/dri/card0", driven by "radeon"
Does it require offloading? no
last cards number = 1
Has amd? yes
Has intel? no
Has nvidia? no
How many cards? 1
Has the system changed? No
main_arch_path i386-linux-gnu, other_arch_path x86_64-linux-gnu
Current alternative: /usr/lib/i386-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/i386-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
Single card detected
Kernel Module is not loaded
Nothing to do
No change - nothing to do
============================ Disks SMART Attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.2 2013-07-26 r3841 [i686-linux-3.16.0-77-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K160
Device Model: Hitachi HTS541612J9AT00
LU WWN Device Id: 5 000cca 524cc2f4b
Firmware Version: SBDOA70H
User Capacity: 120 034 123 776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 1
Local Time is: Tue Jun 13 18:14:11 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0
2 Throughput_Performance P-S--- 100 100 040 - 0
3 Spin_Up_Time POS--- 162 162 033 - 1
4 Start_Stop_Count -O--C- 100 100 000 - 32
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 100 100 040 - 0
9 Power_On_Hours -O--C- 100 100 000 - 53
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 32
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 1
192 Power-Off_Retract_Count -O--CK 100 100 000 - 8
193 Load_Cycle_Count -O--C- 100 100 000 - 431
194 Temperature_Celsius -O---- 157 157 000 - 35 (Min/Max 22/48)
196 Reallocated_Event_Count -O--CK 100 100 000 - 3
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
223 Load_Retry_Count -O-R-- 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors LoggedLe noyau :
System: Kernel: 3.16.0-77-generic i686 (32 bit gcc: 4.8.4)n'est plus supporté.
C'est celui de la version 14.10 > utopic
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#5 Le 14/06/2017, à 00:07
- Xillis
Re : Système lent
J'ai installé toutes les versions de Xubuntu et toutes rames. Cette version-ci est celle qui rame le moins et celle qui s'est débugé pour détecter ma wifi.
A force d'installer et réinstaller cette version, une erreur interne s'est produite, j'ai envoyé le rapport d'erreur, je l'éteint, je le rallume le lendemain et surprise, ma wifi est détectée.
Je n'ai rien fait de spécial, le problème s'est résolu seul, mais cette wifi m'a tellement prit du temps et la tête que je ne souhaite pas changer de distribution, ni de version pour ne pas perdre celle-ci.
[ Lien commercial modéré ]
Hors ligne
#6 Le 14/06/2017, à 00:24
- moko138
Re : Système lent
smartctl a écrit :
9 Power_On_Hours -O--C- 100 100 000 - 53 196 Reallocated_Event_Count -O--CK 100 100 000 - 3
Bizarre...
Dans quelles circonstances as-tu eu ce disque ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#7 Le 14/06/2017, à 01:08
- Caribou22
Re : Système lent
Pentium M + 2 Go de RAM ? Essaye plus léger que Xubuntu. Regarde le lien 1 de ma signature. (Conseil perso : DFlinux 
)
Hors ligne
#8 Le 14/06/2017, à 11:16
- Xillis
Re : Système lent
moko138 a écrit :
smartctl a écrit :9 Power_On_Hours -O--C- 100 100 000 - 53 196 Reallocated_Event_Count -O--CK 100 100 000 - 3Bizarre...
Dans quelles circonstances as-tu eu ce disque ?
Pourquoi bizarre ? Peux tu détailler stp ?
J'ai acheté ce disque sur Amazon.
[ Lien commercial modéré ]
Hors ligne
#9 Le 14/06/2017, à 12:18
- moko138
Re : Système lent
Eh bien, 53 heures, c'est un disque neuf, sauf changement de PCB (le circuit imprimé).
Mais un disque de 53 heures avec déjà 3 nouvelles tentatives de réallocations de secteurs, car
ht tps://en.wikipedia.org/wiki/S.M.A.R.T. dit :
196 Reallocation Event Count : Count of remap operations. The raw value of this attribute shows the total count of attempts to transfer data from reallocated sectors to a spare area. Both successful and unsuccessful attempts are counted.
ça sent le produit défectueux.
Ce disque était-il vendu comme "neuf" ou comme "reconditionné" ?
Sauf erreur de ma part, on ne fabrique plus de disques rotatifs de 120 Go depuis longtemps.
D'ailleurs, il y a quelques minutes, ht tps://www.amazon.com/HITACHI-HTS541612J9AT00-120GB-Ultra-Notebook/dp/B005K22WZO disait :
Currently unavailable.
Par ailleurs, tu peux regarder "Average rating" sur cette page : ht tps://www.hdsentinel.com/storageinfo_details.php?lang=en&model=HITACHI%20HTS541612J9AT00
Donc je t'invite à surveiller
- l'expiration du délai de garantie
- et l'évolution régulière de
cd; sudo smartctl -s on -a /dev/sda > HD_HTS541612J9AT00_smart_$(date +%Y%m%d-%Hh%M).txtavec cette commande, le retour de smartctl n'apparaîtra pas dans le terminal mais sera directement enregistré dans ton home, dans un fichier daté dont tu pourras coller ici le contenu.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#10 Le 15/06/2017, à 14:10
- Xillis
Re : Système lent
Je l'ai acheté neuf, celui-ci ----> https://www.amazon.fr/gp/product/B00132 … UTF8&psc=1
En effet, les disques pour les vieilles machines ne se font plus et sont difficiles à trouver.
[ Lien commercial modéré ]
Hors ligne
#11 Le 16/06/2017, à 18:15
- Xillis
Re : Système lent
Voilà le rapport
smartctl 6.2 2013-07-26 r3841 [i686-linux-3.16.0-77-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K160
Device Model: Hitachi HTS541612J9AT00
Serial Number: SB0D42E4CVTYAH
LU WWN Device Id: 5 000cca 524cc2f4b
Firmware Version: SBDOA70H
User Capacity: 120 034 123 776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 1
Local Time is: Fri Jun 16 18:13:18 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 73) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 161 161 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 37
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 53
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 36
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 1
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 9
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 442
194 Temperature_Celsius 0x0002 203 203 000 Old_age Always - 27 (Min/Max 22/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 3
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.[ Lien commercial modéré ]
Hors ligne
#12 Le 16/06/2017, à 18:24
- Xillis
Re : Système lent
Caribou22 a écrit :
Pentium M + 2 Go de RAM ? Essaye plus léger que Xubuntu. Regarde le lien 1 de ma signature. (Conseil perso : DFlinux
Caribou, j'ai visité ton lien et testé la distribution que tu me conseille DFlinux. Celle-ci me plaît bien, la wifi est détectée et plus fluide que Xubuntu mais il y a quand même une petite lenteur dans l'ouverture des applications et surtout le surf sur le web. Je ne comprend pas, car le matériel n'est pas médiocre, j'ai tout de même 2 giga de ram, 1.73 gigahertz de processeur et 120 giga d'espace. Avec cette distribution, l'execution devrait être fluide comme sur XP. Moko138 a remarqué un problème sur mon disque dur, pourtant neuf, est ce que ce serait la cause de ce ralentissement ? Et ce fameux bug "host" concerne-t'il aussi cette distribution DFlinux ?
Merci
Dernière modification par Xillis (Le 16/06/2017, à 18:25)
[ Lien commercial modéré ]
Hors ligne
#13 Le 16/06/2017, à 19:15
- moko138
Re : Système lent
Ton disque est toujours à 53 heures.
Montre
dmesg | grep -E "sector|LBA"%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#14 Le 16/06/2017, à 19:32
- Xillis
Re : Système lent
moko138 a écrit :
Ton disque est toujours à 53 heures.
Montre
dmesg | grep -E "sector|LBA"
Normal puisque ce n'est pas mon ordi principal, je le prépare pour l'emmener cet été, il n'a donc que 53h.
[ Lien commercial modéré ]
Hors ligne
#15 Le 20/06/2017, à 16:38
- Xillis
Re : Système lent
Up
[ Lien commercial modéré ]
Hors ligne
#16 Le 20/06/2017, à 18:01
- moko138
Re : Système lent
Xillis a écrit :
Up
Ben oui, il y a quatre jours, je t'ai demandé un retour (à faire depuis le disque suspect).
Alors, en effet : "up !"
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#17 Le 20/06/2017, à 18:04
- nam1962
Re : Système lent
Il peut être judicieux de régler la swappiness
echo vm.swappiness=5 | sudo tee /etc/sysctl.d/99-swappiness.conf
echo vm.vfs_cache_pressure=50 | sudo tee -a /etc/sysctl.d/99-swappiness.conf
sudo sysctl -p /etc/sysctl.d/99-swappiness.confDonne nous aussi :
cat /etc/apt/sources.list
ls /etc/apt/sources.list.d -1[ Modéré ]
Hors ligne
#18 Le 21/06/2017, à 23:02
- Xillis
Re : Système lent
nam1962 a écrit :
Il peut être judicieux de régler la swappiness
echo vm.swappiness=5 | sudo tee /etc/sysctl.d/99-swappiness.conf echo vm.vfs_cache_pressure=50 | sudo tee -a /etc/sysctl.d/99-swappiness.conf sudo sysctl -p /etc/sysctl.d/99-swappiness.confDonne nous aussi :
cat /etc/apt/sources.list ls /etc/apt/sources.list.d -1
C'est quoi la swappiness ?
Tes commandes ne donnent rien.
Il n'y a que celle-ci qui fonctionne : cat /etc/apt/sources.list
xillis@xillis-Latitude-D610:~$ cat /etc/apt/sources.list
#deb cdrom:[Xubuntu 14.04.2 LTS _Trusty Tahr_ - Release i386 (20150218.1)]/ trusty main multiverse restricted universe
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ trusty main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty main restricted
## Major bug fix updates produced after the final release of the
## distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ trusty universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty universe
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-updates universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://fr.archive.ubuntu.com/ubuntu/ trusty multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-updates multiverse
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu trusty-security main restricted
deb-src http://security.ubuntu.com/ubuntu trusty-security main restricted
deb http://security.ubuntu.com/ubuntu trusty-security universe
deb-src http://security.ubuntu.com/ubuntu trusty-security universe
deb http://security.ubuntu.com/ubuntu trusty-security multiverse
deb-src http://security.ubuntu.com/ubuntu trusty-security multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
# deb http://archive.canonical.com/ubuntu trusty partner
# deb-src http://archive.canonical.com/ubuntu trusty partner
## This software is not part of Ubuntu, but is offered by third-party
## developers who want to ship their latest software.
deb http://extras.ubuntu.com/ubuntu trusty main
deb-src http://extras.ubuntu.com/ubuntu trusty main
xillis@xillis-Latitude-D610:~$ Merci
[ Lien commercial modéré ]
Hors ligne
#19 Le 22/06/2017, à 14:11
- nam1962
Re : Système lent
Il manque le retour de
ls /etc/apt/sources.list.d -1Les 2 premières commandes n'ont pas de retour et c'est normal : elle créent des commandes dans un fichier, la 3e doit par contre avoir un retour.
Leur effet est normalement sensible après redémarrage : http://forum.ubuntu-fr.org/viewtopic.ph … #p21749234
[ Modéré ]
Hors ligne
#20 Le 22/06/2017, à 21:04
- Xillis
Re : Système lent
nam1962 a écrit :
Il manque le retour de
ls /etc/apt/sources.list.d -1Les 2 premières commandes n'ont pas de retour et c'est normal : elle créent des commandes dans un fichier, la 3e doit par contre avoir un retour.
Leur effet est normalement sensible après redémarrage : http://forum.ubuntu-fr.org/viewtopic.ph … #p21749234
Non cette commande-ci non plus ne donne pas de retour:
xillis@xillis-Latitude-D610:~$ ls /etc/apt/sources.list.d -1
xillis@xillis-Latitude-D610:~$ Et pour les autres commandes, où je récupère les fichiers pour te mettre le rapport ?
xillis@xillis-Latitude-D610:~$ echo vm.swappiness=5 | sudo tee /etc/sysctl.d/99-swappiness.conf
[sudo] password for xillis:
vm.swappiness=5
xillis@xillis-Latitude-D610:~$ xillis@xillis-Latitude-D610:~$ echo vm.vfs_cache_pressure=50 | sudo tee -a /etc/sysctl.d/99-swappiness.conf
[sudo] password for xillis:
vm.vfs_cache_pressure=50
xillis@xillis-Latitude-D610:~$ xillis@xillis-Latitude-D610:~$ sudo sysctl -p /etc/sysctl.d/99-swappiness.conf
[sudo] password for xillis:
vm.swappiness = 5
vm.vfs_cache_pressure = 50
xillis@xillis-Latitude-D610:~$ Dernière modification par Xillis (Le 22/06/2017, à 21:08)
[ Lien commercial modéré ]
Hors ligne
#21 Le 22/06/2017, à 21:40
- nam1962
Re : Système lent
Donc tu n'as pas de PPA (et c'est bien )
Pour les autres commandes, tout est bien passé.
Constates-tu une meilleure réactivité de ton ordi ?
Dernière modification par nam1962 (Le 23/06/2017, à 07:38)
[ Modéré ]
Hors ligne
#22 Le 22/06/2017, à 21:49
- Xillis
Re : Système lent
C'est un peu mieux mais j'entend toujours le processeur qui chauffe et n'est pas rapide comme l'éclair.
J'ai l'intention d'installer DFLinux recommandé par Caribou, est ce que ces réglages seront toujours valables si je change de distribution ?
[ Lien commercial modéré ]
Hors ligne
#23 Le 23/06/2017, à 07:42
- nam1962
Re : Système lent
Oui, ils sont applicables à toute tout distribution (certaines ont déjà un réglage efficace d'origine : Manjaro par exemple a une swappiness de 1 par défaut)
Tu peux vérifier le réglage avec :
cat /proc/sys/vm/swappiness[ Modéré ]
Hors ligne
#24 Le 23/06/2017, à 08:09
- Caribou22
Re : Système lent
Et passer d'une base Ubuntu à une base Debian devrait consommer moins de ressources et donc moins tirer sur ton processeur oui
Hors ligne
#25 Le 23/06/2017, à 19:05
- Xillis
Re : Système lent
Impossible d'installer DFLinux, je bloque à l'étape partitionner le disque.
Lorsque je sélectionne la partition déjà existante et clique sur continuer, le système me met, aucun système de fichiers n'a été choisi comme racine.
Et quand je souhaite modifier la partition j'ai le message "Le redimensionnement est impossible" Pour une raison non identifiée, il n'est pas possible de redimensionner cette partition. Veuillez consulter le /var/log/sylog ou la quatrième console virtuelle pour obtenir des précisions"
Evidemment je ne sais pas consulter le fichier /var/log ni atteindre la console virtuelle.
Je fait quoi ?
[ Lien commercial modéré ]
Hors ligne
- Forum
- » XFCE
- » Système lent