Ubuntu-fr

vincebel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

@F50 : j'ai fait ce que tu me recommandes, sans grand succès.

vincent@vincent-X550JK:~ optirun glxgears
[ 6467.449220] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.

[ 6467.449302] [ERROR]Aborting because fallback start is disabled.

Ensuite j'ai modifié le fichier /etc/bumblebee/xorg.conf.nvidia, pour décommenter la ligne :

  BusID "PCI:01:00:0"

car :

vincent@vincent-X550JK:~ lspci
...
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 850M] (rev ff)
....

Puis j'ai relancé le service bumblebee:

vincent@vincent-X550JK:sudo service bumblebeed restart

J'ai lancé la commande optirun glxgears, et ça c'est soldé par un PC complètement figé...

reboot forcé, cette fois, ça fonctionne.... mais avec des perf nulles.

vincent@vincent-X550JK:~ optirun -vv glxgears
[ 6715.658487] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 6715.659022] [INFO]Configured driver: nvidia
[ 6715.659246] [DEBUG]optirun version 3.2.1 starting...
[ 6715.659284] [DEBUG]Active configuration:
[ 6715.659303] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 6715.659323] [DEBUG] X display: :8
[ 6715.659346] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-331:/usr/lib32/nvidia-331
[ 6715.659365] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 6715.659384] [DEBUG] Accel/display bridge: auto
[ 6715.659404] [DEBUG] VGL Compression: proxy
[ 6715.659424] [DEBUG] VGLrun extra options: 
[ 6715.659444] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 6715.659527] [DEBUG]Using auto-detected bridge primus
[ 6718.044175] [INFO]Response: Yes. X is active.

[ 6718.044199] [INFO]Running application using primus.
[ 6718.044362] [DEBUG]Process glxgears started, PID 3241.
291 frames in 5.0 seconds = 58.138 FPS
299 frames in 5.0 seconds = 59.652 FPS
287 frames in 5.0 seconds = 57.256 FPS

Pourtant c'est bien le driver nvidia-331 qui est utilisé.

Notez que les perfs, je m'en cogne, moi je veux juste gagner en autonomie, donc au lieu de désactiver le chipset Intel, moi, c'est la carte NVidia que je souhaite rendre muette!

Dernière modification par vincebel (Le 17/05/2015, à 18:19)

F50

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Ça a déjà l'aire de s'être mis en branle. Ne te fies pas au résultat de glxgears, là, cela semble être la fréquence de rafraîchissement du moniteur, ce qui n'est pas une mauvaise chose, 2800 FPS pour un moniteur à 60 FPS ne sert strictement à rien.

Tu as bien modifiés le bumblebee.conf pour mettre nvidia-331 ? Poste le fichier.

Que donne :

optirun -b none nvidia-settings -c :8

Faut qu'une version de BIOS non bridé existe...Mais c'est vrai que y a pas toujours. De base, il ne faudrait jamais acheter un laptop de marque Acer, HP, PB, Medion déjà pour commencer

De même que alienware (14 bios cassé) et dell avec leurs bios bridés au rabais.

Dernière modification par F50 (Le 19/05/2015, à 06:48)

vincebel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

le nouveau bumblebee : http://pastebin.com/SHwMug6Q

vincent@vincent-X550JK:~ optirun -b none nvidia-settings -c :8
Failed to open VDPAU backend libvdpau_nvidia.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
** Message: PRIME: Requires offloading
** Message: PRIME: is it supported? yes

Puis la fenêtre NVIDIA settings s'ouvre!

J'ai pas mal de freeze complet de la machine (perte clavier et souris, les magics keys fonctionne toujours).  tu pense que ça peut avoir un lien?

F50

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Puis la fenêtre NVIDIA settings s'ouvre!

C'est déjà bon signe.

J'ai pas mal de freeze complet de la machine (perte clavier et souris, les magics keys fonctionne toujours).  tu pense que ça peut avoir un lien?

Bien sûr.

On va installer un ppa qui devrait améliorer les choses, fait ces commandes puis reboot et regardes si c'est mieux.:

sudo apt-add-repository ppa:bumblebee/stable

sudo apt-get update

sudo apt-get clean

vincebel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Pour les freezes, je vais voir aujourd'hui, mais hier, 5 dans la journée... légèrement pénible.....

sinon suite à l'utilisation du ppa :

vincent@vincent-X550JK:~ optirun -vv glxgears 
[ 1096.563668] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 1096.564258] [INFO]Configured driver: nvidia
[ 1096.564518] [DEBUG]optirun version 3.2.1 starting...
[ 1096.564557] [DEBUG]Active configuration:
[ 1096.564584] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 1096.564613] [DEBUG] X display: :8
[ 1096.564643] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-331:/usr/lib32/nvidia-331
[ 1096.564673] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 1096.564703] [DEBUG] Accel/display bridge: auto
[ 1096.564732] [DEBUG] VGL Compression: proxy
[ 1096.564762] [DEBUG] VGLrun extra options: 
[ 1096.564791] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 1096.564909] [DEBUG]Using auto-detected bridge primus
[ 1098.918626] [INFO]Response: Yes. X is active.

[ 1098.918645] [INFO]Running application using primus.
[ 1098.918763] [DEBUG]Process glxgears started, PID 2956.
293 frames in 5.0 seconds = 58.534 FPS
301 frames in 5.0 seconds = 60.003 FPS
300 frames in 5.0 seconds = 59.999 FPS
300 frames in 5.0 seconds = 60.000 FPS
300 frames in 5.0 seconds = 60.000 FPS
301 frames in 5.0 seconds = 60.001 FPS
300 frames in 5.0 seconds = 59.999 FPS
300 frames in 5.0 seconds = 60.000 FPS

En le laissant tourner un peu, j'ai eu quelques :

primus: warning: dropping a frame to avoid deadlock

mais bon, si ça résout mes soucis de Freeze, ça me va

F50

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Là ça semble fonctionner, laisse tourner tu verras si ça freeze ou pas, le cas échéant, on remettra l'ouvrage sur le métier.

vincebel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bon, ben 1er freeze de la journée..

J'ai fait rename violent des modules nvidia, pour pas qu'ils puissent être chargés. Voir si ça arrange les choses.

Par contre, je ne vois pas ce qui te fait dire que cette fois, ça semble fonctionner. optirun -vv glxgears ne donne rien de mieux.

Par contre, quand j'exécute cette commande, un lsmod montre bien le module nvidia.

F50

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Il n'y a pas d'erreur dans optirun -vv glxgears, poste le contenu de /var/log/Xorg.8.log.

vincebel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

OK, mais il n'y en avait pas non plus au #904 (pas trouver comment faire un lien vers ce post en particulier)

Sinon, en réponse à ta demande :

[    96.707] 
X.Org X Server 1.16.0
Release Date: 2014-07-16
[    96.707] X Protocol Version 11, Revision 0
[    96.707] Build Operating System: Linux 3.2.0-70-generic x86_64 Ubuntu
[    96.708] Current Operating System: Linux vincent-X550JK 3.16.0-37-generic #51~14.04.1-Ubuntu SMP Wed May 6 15:23:14 UTC 2015 x86_64
[    96.708] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-37-generic.efi.signed root=UUID=5e876c26-91ed-48b1-add6-c77b20940159 ro quiet splash vt.handoff=7
[    96.708] Build Date: 12 February 2015  11:11:26PM
[    96.708] xorg-server 2:1.16.0-1ubuntu1.2~trusty2 (For technical support please see http://www.ubuntu.com/support) 
[    96.708] Current version of pixman: 0.30.2
[    96.708] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    96.708] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    96.708] (==) Log file: "/var/log/Xorg.8.log", Time: Tue May 19 10:28:28 2015
[    96.799] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[    96.799] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[    96.799] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    96.820] (==) ServerLayout "Layout0"
[    96.820] (==) No screen section available. Using defaults.
[    96.820] (**) |-->Screen "Default Screen Section" (0)
[    96.820] (**) |   |-->Monitor "<default monitor>"
[    96.820] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    96.820] (**) |   |-->Device "DiscreteNvidia"
[    96.820] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    96.820] (**) Option "AutoAddDevices" "false"
[    96.820] (**) Option "AutoAddGPU" "false"
[    96.820] (**) Not automatically adding devices
[    96.820] (==) Automatically enabling devices
[    96.820] (**) Not automatically adding GPU devices
[    96.820] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    96.820] 	Entry deleted from font path.
[    96.820] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    96.820] 	Entry deleted from font path.
[    96.820] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    96.820] 	Entry deleted from font path.
[    96.820] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    96.820] 	Entry deleted from font path.
[    96.820] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    96.820] 	Entry deleted from font path.
[    96.820] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    96.820] (++) ModulePath set to "/usr/lib/nvidia-331/xorg,/usr/lib/xorg/modules"
[    96.820] (==) |-->Input Device "<default pointer>"
[    96.820] (==) |-->Input Device "<default keyboard>"
[    96.820] (==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
[    96.820] (==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
[    96.820] (II) Loader magic: 0x7fc4f7027c80
[    96.820] (II) Module ABI versions:
[    96.820] 	X.Org ANSI C Emulation: 0.4
[    96.820] 	X.Org Video Driver: 18.0
[    96.820] 	X.Org XInput driver : 21.0
[    96.820] 	X.Org Server Extension : 8.0
[    96.820] (II) xfree86: Adding drm device (/dev/dri/card1)
[    96.820] (II) xfree86: Adding drm device (/dev/dri/card0)
[    96.821] (--) PCI: (0:1:0:0) 10de:1391:1043:178d rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    96.821] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    96.821] (II) "glx" will be loaded by default.
[    96.821] (II) LoadModule: "glx"
[    96.861] (II) Loading /usr/lib/nvidia-331/xorg/libglx.so
[   100.316] (II) Module glx: vendor="NVIDIA Corporation"
[   100.316] 	compiled for 4.0.2, module version = 1.0.0
[   100.316] 	Module class: X.Org Server Extension
[   100.316] (II) NVIDIA GLX Module  331.113  Mon Dec  1 20:24:35 PST 2014
[   100.339] (II) LoadModule: "nvidia"
[   100.340] (II) Loading /usr/lib/nvidia-331/xorg/nvidia_drv.so
[   100.635] (II) Module nvidia: vendor="NVIDIA Corporation"
[   100.635] 	compiled for 4.0.2, module version = 1.0.0
[   100.635] 	Module class: X.Org Video Driver
[   100.700] (II) LoadModule: "mouse"
[   100.700] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[   100.767] (II) Module mouse: vendor="X.Org Foundation"
[   100.767] 	compiled for 1.16.0, module version = 1.9.0
[   100.767] 	Module class: X.Org XInput Driver
[   100.767] 	ABI class: X.Org XInput driver, version 21.0
[   100.767] (II) LoadModule: "kbd"
[   100.767] (WW) Warning, couldn't open module kbd
[   100.767] (II) UnloadModule: "kbd"
[   100.767] (II) Unloading kbd
[   100.767] (EE) Failed to load module "kbd" (module does not exist, 0)
[   100.767] (II) NVIDIA dlloader X Driver  331.113  Mon Dec  1 20:01:51 PST 2014
[   100.767] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   100.774] (--) using VT number 7

[   100.890] (II) Loading sub module "fb"
[   100.890] (II) LoadModule: "fb"
[   100.890] (II) Loading /usr/lib/xorg/modules/libfb.so
[   100.935] (II) Module fb: vendor="X.Org Foundation"
[   100.935] 	compiled for 1.16.0, module version = 1.0.0
[   100.935] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   100.935] (WW) Unresolved symbol: fbGetGCPrivateKey
[   100.935] (II) Loading sub module "wfb"
[   100.935] (II) LoadModule: "wfb"
[   100.935] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   100.977] (II) Module wfb: vendor="X.Org Foundation"
[   100.977] 	compiled for 1.16.0, module version = 1.0.0
[   100.977] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   100.977] (II) Loading sub module "ramdac"
[   100.977] (II) LoadModule: "ramdac"
[   100.977] (II) Module "ramdac" already built-in
[   101.110] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   101.111] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[   101.111] (==) NVIDIA(0): RGB weight 888
[   101.111] (==) NVIDIA(0): Default visual is TrueColor
[   101.111] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   101.111] (**) NVIDIA(0): Option "NoLogo" "true"
[   101.111] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[   101.111] (**) NVIDIA(0): Option "UseEDID" "false"
[   101.111] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[   101.111] (**) NVIDIA(0): Enabling 2D acceleration
[   101.111] (**) NVIDIA(0): Ignoring EDIDs
[   101.111] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[   101.111] (**) NVIDIA(0):     mode
[   103.116] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[   103.117] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 850M (GM107-A) at PCI:1:0:0 (GPU-0)
[   103.120] (--) NVIDIA(0): Memory: 2097152 kBytes
[   103.120] (--) NVIDIA(0): VideoBIOS: 82.07.47.00.05
[   103.120] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   103.120] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 850M at PCI:1:0:0
[   103.120] (--) NVIDIA(0):     none
[   103.120] (II) NVIDIA(0): Validated MetaModes:
[   103.120] (II) NVIDIA(0):     "NULL"
[   103.120] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[   103.120] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[   103.120] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[   103.120] (--) Depth 24 pixmap format is 32 bpp
[   103.120] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[   103.120] (II) NVIDIA:     access.
[   103.473] (II) NVIDIA(0): Setting mode "NULL"
[   103.473] (EE) NVIDIA(0): Failed to initiate mode change.
[   103.473] (EE) NVIDIA(0): Failed to complete mode change
[   103.568] (==) NVIDIA(0): Disabling shared memory pixmaps
[   103.568] (==) NVIDIA(0): Backing store enabled
[   103.568] (==) NVIDIA(0): Silken mouse enabled
[   103.568] (==) NVIDIA(0): DPMS enabled
[   103.568] (II) Loading sub module "dri2"
[   103.568] (II) LoadModule: "dri2"
[   103.568] (II) Module "dri2" already built-in
[   103.568] (II) NVIDIA(0): [DRI2] Setup complete
[   103.568] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   103.568] (--) RandR disabled
[   103.572] (II) Initializing extension GLX
[   104.145] (II) XKB: reuse xkmfile /var/lib/xkb/server-02D8252E59564A234380F1E5417646A9DB3B7452.xkm
[   104.189] (II) Using input driver 'mouse' for '<default pointer>'
[   104.189] (**) Option "CorePointer" "on"
[   104.189] (**) <default pointer>: always reports core events
[   104.189] (WW) <default pointer>: No Device specified, looking for one...
[   104.204] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[   104.204] (--) <default pointer>: Device: "/dev/input/mice"
[   104.204] (==) <default pointer>: Protocol: "Auto"
[   104.204] (**) <default pointer>: always reports core events
[   104.204] (**) Option "Device" "/dev/input/mice"
[   104.236] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[   104.236] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[   104.236] (**) <default pointer>: Buttons: 9
[   104.236] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[   104.236] (**) <default pointer>: (accel) keeping acceleration scheme 1
[   104.236] (**) <default pointer>: (accel) acceleration profile 0
[   104.236] (**) <default pointer>: (accel) acceleration factor: 2.000
[   104.236] (**) <default pointer>: (accel) acceleration threshold: 4
[   104.236] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[   104.528] (II) <default pointer>: ps2EnableDataReporting: succeeded
[   104.528] (II) LoadModule: "kbd"
[   104.528] (WW) Warning, couldn't open module kbd
[   104.528] (II) UnloadModule: "kbd"
[   104.528] (II) Unloading kbd
[   104.528] (EE) Failed to load module "kbd" (module does not exist, 0)
[   104.528] (EE) No input driver matching `kbd'
[   104.529] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   104.529] (II) AutoAddDevices is off - not adding device.
[   104.530] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[   104.530] (II) AutoAddDevices is off - not adding device.
[   104.530] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[   104.530] (II) AutoAddDevices is off - not adding device.
[   104.530] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[   104.530] (II) AutoAddDevices is off - not adding device.
[   104.530] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   104.530] (II) AutoAddDevices is off - not adding device.
[   104.530] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[   104.530] (II) AutoAddDevices is off - not adding device.
[   104.530] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[   104.530] (II) AutoAddDevices is off - not adding device.
[   104.530] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event4)
[   104.530] (II) AutoAddDevices is off - not adding device.
[   104.531] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event5)
[   104.531] (II) AutoAddDevices is off - not adding device.
[   104.531] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event6)
[   104.531] (II) AutoAddDevices is off - not adding device.
[   104.531] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event7)
[   104.531] (II) AutoAddDevices is off - not adding device.
[   104.531] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/mouse0)
[   104.531] (II) AutoAddDevices is off - not adding device.
[   104.531] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event8)
[   104.531] (II) AutoAddDevices is off - not adding device.
[   104.531] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/js0)
[   104.531] (II) AutoAddDevices is off - not adding device.
[   104.531] (II) config/udev: Adding input device USB Camera (/dev/input/event17)
[   104.531] (II) AutoAddDevices is off - not adding device.
[   104.532] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[   104.532] (II) AutoAddDevices is off - not adding device.
[   104.532] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
[   104.532] (II) AutoAddDevices is off - not adding device.
[   104.532] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event12)
[   104.532] (II) AutoAddDevices is off - not adding device.
[   104.532] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[   104.532] (II) AutoAddDevices is off - not adding device.
[   104.532] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[   104.532] (II) AutoAddDevices is off - not adding device.
[   104.532] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[   104.532] (II) AutoAddDevices is off - not adding device.
[   159.061] (II) UnloadModule: "mouse"
[   159.079] (II) NVIDIA(GPU-0): Deleting GPU-0
[   159.080] (EE) Server terminated successfully (0). Closing log file.

Dernière modification par vincebel (Le 19/05/2015, à 09:54)

F50

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Je ne voit pas de problème au niveau de Xorg.8.log. Les freeze peuvent venir d'ailleurs, ouvre un terminal, tape top puis 1 dedans et laisse le ouvert constamment puis, au moment du freeze, regarde si un processus ne bouffe pas excessivement de la ressource.

vincebel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

3ème crash du jour (j'étais au toilette...).... Avec un terminal ouvert avec top en continu.
Plus gros consommateur, firefox avec 12%, puis dropbox.

Je commence à me demander si ça vient bien de l'affichage. Je devrais peut être ouvrir un post dédié non?

vincebel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Les 5 èmes et 6 èmes freezes du jour, je les ai eu en ouvrant le dashboard Unity.
Avec nvidia renommé et bumblebee désinstallé.

Je tente un passage sur xfce. la suite demain.

F50

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Avec nvidia renommé et bumblebee désinstallé.

Je tente un passage sur xfce. la suite demain.

Bonne décision mais que veux-tu dires par "Avec nvidia renommé et bumblebee désinstallé" ? Car avec ta config, c'est ou nvidia avec bumblebee ou nouveau.

vincebel

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Je voulais m'assurer que ça ne venait pas des drivers NVIDIA, donc j'avais renommé les modules, dans /etc/module puis redémarrer --> toujours autant de freeze

Puis j'ai desinstalle Bumblebee --> idem

Donc je suis passé à xfce --> plus de soucis depuis 3 jours maintenant.

Donc ça vient d'unity, je ne sais pas comment ni pourquoi, mais ça vient de lui.
Dans la semaine, je remets les drivers  NVIDIA et Bumblebee, puis je ferais des tests de conso.

F50

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Je vois. Perso je n'ai jamais utilisé unity mais sous xfce et enlightenment 0.19 bumblebee fonctionnait sans souci.

Johann51260

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bonjour,
je fais appel à vos conseil suite à un problème d'affichage de résolution d'un jeu. Je préviens de suite je suis un novice sous Linux.  J'aJ'ai installer ubuntu gnome 15.04 sur mon portable doter dun système "optimus". J'ai installé mes driver propriétaire ce qui a inclus "prime". jusque là pas de problème.  Après quelques recherche je trouve un jeux que j'avais sous Windows disponible sus linux sur steam "euro truck simulator." Le problème est que quand je le lance avec ma carte Intel le jeu lag à mort et le graphisme son moche et que quand je le lance avec ma carte nVidia ma résolution passe en 640x... mais la résolution du jeux ne dois pas changer car je ne vois que le quart supérieur gauche de l'écran et le reste et noir. Comment puis-je m'en sortir?

Johann 51260

Johann51260

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Je viens de réinstaller ubuntu 14.10 le problème et résolu.  Je met à jour en 15.04 ça rebug. Bizarre

PPdM

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Reste en 14.O4

---

La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera

palima

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bonjour,

Comme vous pouvez vous en douter, j'ai moi aussi un problème.
Tout d'abord, voici ma configuration :

Ubuntu 14.04
Cartes :
Nvidia :GEforce840M
Intel : Haswell-ULT Integrated Graphics Controller

J'ai installé bumblebee. Mais lorsque que j'exécute n'importe quoi avec optirun, je reçois le message suivant :

[ 3298.372948] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) [drm] KMS not enabled

[ 3298.372984] [ERROR]Aborting because fallback start is disabled.

Merci à ceux qui peuvent m'aider !

Autres informations qui pourraient être utiles :
->Pas de problème avec Windows 8 installé sur une autre partition.
->J'ai déjà fait un reformatage de Linux pour d'autres raisons mais il y a toujours le même bug.
-> J'ai fait des sudo apt-get upgrade et update sans succès.
->La commande " lshw -enable pci -class display" ne m'indique que ma carte Intel mais la commande lspci donne les deux cartes.

00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
04:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev ff)

 *-display               
       description: VGA compatible controller
       produit: Haswell-ULT Integrated Graphics Controller
       fabriquant: Intel Corporation
       identifiant matériel: 2
       information bus: pci@0000:00:02.0
       version: 09
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: msi pm vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       ressources: irq:64 mémoire:f7400000-f77fffff mémoire:d0000000-dfffffff portE/S:f000(taille=64)

-> Le fichier /etc/X11/xorg.conf n'eiste pas
-> Voici le contenu de /var/log/Xorg.0.log :

[    33.880] 
X.Org X Server 1.16.0
Release Date: 2014-07-16
[    33.880] X Protocol Version 11, Revision 0
[    33.880] Build Operating System: Linux 3.2.0-70-generic x86_64 Ubuntu
[    33.880] Current Operating System: Linux basile-portable-ubuntu 3.16.0-38-generic #52~14.04.1-Ubuntu SMP Fri May 8 09:43:57 UTC 2015 x86_64
[    33.880] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic.efi.signed root=UUID=829e6975-5fa2-41af-81e1-e4af9529aaa7 ro quiet splash vt.handoff=7
[    33.880] Build Date: 12 February 2015  11:11:26PM
[    33.880] xorg-server 2:1.16.0-1ubuntu1.2~trusty2 (For technical support please see http://www.ubuntu.com/support) 
[    33.880] Current version of pixman: 0.30.2
[    33.880] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    33.880] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    33.880] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 28 16:47:57 2015
[    33.946] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    34.081] (==) No Layout section.  Using the first Screen section.
[    34.081] (==) No screen section available. Using defaults.
[    34.081] (**) |-->Screen "Default Screen Section" (0)
[    34.081] (**) |   |-->Monitor "<default monitor>"
[    34.110] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    34.110] (==) Automatically adding devices
[    34.110] (==) Automatically enabling devices
[    34.110] (==) Automatically adding GPU devices
[    34.164] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    34.165] 	Entry deleted from font path.
[    34.165] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    34.165] 	Entry deleted from font path.
[    34.165] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    34.165] 	Entry deleted from font path.
[    34.165] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    34.165] 	Entry deleted from font path.
[    34.165] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    34.165] 	Entry deleted from font path.
[    34.165] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    34.165] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    34.165] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    34.165] (II) Loader magic: 0x7f878816bc80
[    34.165] (II) Module ABI versions:
[    34.165] 	X.Org ANSI C Emulation: 0.4
[    34.165] 	X.Org Video Driver: 18.0
[    34.165] 	X.Org XInput driver : 21.0
[    34.165] 	X.Org Server Extension : 8.0
[    34.165] (II) xfree86: Adding drm device (/dev/dri/card0)
[    34.166] (--) PCI:*(0:0:2:0) 8086:0a16:1043:14fd rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    34.166] (--) PCI: (0:4:0:0) 10de:1341:1043:14fd rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[    34.175] (II) LoadModule: "glx"
[    34.317] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    34.771] (II) Module glx: vendor="X.Org Foundation"
[    34.771] 	compiled for 1.16.0, module version = 1.0.0
[    34.771] 	ABI class: X.Org Server Extension, version 8.0
[    34.771] (==) AIGLX enabled
[    34.771] (==) Matched intel as autoconfigured driver 0
[    34.771] (==) Matched intel as autoconfigured driver 1
[    34.771] (==) Matched modesetting as autoconfigured driver 2
[    34.771] (==) Matched fbdev as autoconfigured driver 3
[    34.771] (==) Matched vesa as autoconfigured driver 4
[    34.771] (==) Assigned the driver to the xf86ConfigLayout
[    34.771] (II) LoadModule: "intel"
[    34.771] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    34.836] (II) Module intel: vendor="X.Org Foundation"
[    34.836] 	compiled for 1.16.0, module version = 2.99.914
[    34.836] 	Module class: X.Org Video Driver
[    34.836] 	ABI class: X.Org Video Driver, version 18.0
[    34.836] (II) LoadModule: "modesetting"
[    34.837] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    34.843] (II) Module modesetting: vendor="X.Org Foundation"
[    34.843] 	compiled for 1.16.0, module version = 0.9.0
[    34.843] 	Module class: X.Org Video Driver
[    34.843] 	ABI class: X.Org Video Driver, version 18.0
[    34.843] (II) LoadModule: "fbdev"
[    34.844] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    34.855] (II) Module fbdev: vendor="X.Org Foundation"
[    34.855] 	compiled for 1.16.0, module version = 0.4.4
[    34.855] 	Module class: X.Org Video Driver
[    34.855] 	ABI class: X.Org Video Driver, version 18.0
[    34.855] (II) LoadModule: "vesa"
[    34.855] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    34.875] (II) Module vesa: vendor="X.Org Foundation"
[    34.875] 	compiled for 1.16.0, module version = 2.3.3
[    34.876] 	Module class: X.Org Video Driver
[    34.876] 	ABI class: X.Org Video Driver, version 18.0
[    34.876] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    34.876] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    34.876] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    34.876] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    34.876] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    34.876] (II) FBDEV: driver for framebuffer: fbdev
[    34.876] (II) VESA: driver for VESA chipsets: vesa
[    34.876] (++) using VT number 7

[    34.877] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[    34.877] (II) intel(0): SNA compiled: xserver-xorg-video-intel-lts-utopic 2:2.99.914-1~exp1ubuntu4.2~trusty1 (Maarten Lankhorst <maarten.lankhorst@ubuntu.com>)
[    34.877] (II) intel(0): SNA compiled for use with valgrind
[    34.878] (WW) Falling back to old probe method for modesetting
[    34.878] (WW) Falling back to old probe method for fbdev
[    34.878] (II) Loading sub module "fbdevhw"
[    34.878] (II) LoadModule: "fbdevhw"
[    34.878] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    34.886] (II) Module fbdevhw: vendor="X.Org Foundation"
[    34.886] 	compiled for 1.16.0, module version = 0.0.2
[    34.886] 	ABI class: X.Org Video Driver, version 18.0
[    34.886] (WW) Falling back to old probe method for vesa
[    34.886] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[    34.886] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[    34.886] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    34.886] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    34.887] (==) intel(0): RGB weight 888
[    34.887] (==) intel(0): Default visual is TrueColor
[    34.887] (II) intel(0): Output eDP1 has no monitor section
[    34.887] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    34.887] (II) intel(0): Output HDMI1 has no monitor section
[    34.887] (II) intel(0): Output DP1 has no monitor section
[    34.887] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    34.887] (II) intel(0): Output VIRTUAL1 has no monitor section
[    34.887] (--) intel(0): Output eDP1 using initial mode 1600x900 on pipe 0
[    34.887] (==) intel(0): TearFree disabled
[    34.887] (==) intel(0): DPI set to (96, 96)
[    34.887] (II) Loading sub module "dri2"
[    34.887] (II) LoadModule: "dri2"
[    34.887] (II) Module "dri2" already built-in
[    34.887] (II) Loading sub module "present"
[    34.887] (II) LoadModule: "present"
[    34.887] (II) Module "present" already built-in
[    34.887] (II) UnloadModule: "modesetting"
[    34.887] (II) Unloading modesetting
[    34.887] (II) UnloadModule: "fbdev"
[    34.887] (II) Unloading fbdev
[    34.887] (II) UnloadSubModule: "fbdevhw"
[    34.887] (II) Unloading fbdevhw
[    34.887] (II) UnloadModule: "vesa"
[    34.887] (II) Unloading vesa
[    34.887] (==) Depth 24 pixmap format is 32 bpp
[    34.906] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[    34.906] (==) intel(0): Backing store enabled
[    34.906] (==) intel(0): Silken mouse enabled
[    34.907] (II) intel(0): HW Cursor enabled
[    34.907] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    34.907] (==) intel(0): DPMS enabled
[    34.907] (II) intel(0): [DRI2] Setup complete
[    34.907] (II) intel(0): [DRI2]   DRI driver: i965
[    34.907] (II) intel(0): [DRI2]   VDPAU driver: i965
[    34.907] (II) intel(0): direct rendering: DRI2 enabled
[    34.907] (II) intel(0): hardware support for Present enabled
[    34.907] (==) intel(0): display hotplug detection enabled
[    34.907] (--) RandR disabled
[    35.085] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    35.085] (II) AIGLX: enabled GLX_ARB_create_context
[    35.085] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    35.085] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    35.085] (II) AIGLX: enabled GLX_INTEL_swap_event
[    35.085] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    35.085] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    35.085] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    35.085] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    35.085] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    35.085] (II) AIGLX: Loaded and initialized i965
[    35.085] (II) GLX: Initialized DRI2 GL provider for screen 0
[    35.087] (II) intel(0): switch to mode 1600x900@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    35.104] (II) intel(0): Setting screen physical size to 423 x 238
[    35.208] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    35.225] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    35.225] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    35.225] (II) LoadModule: "evdev"
[    35.225] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    35.268] (II) Module evdev: vendor="X.Org Foundation"
[    35.268] 	compiled for 1.16.0, module version = 2.9.0
[    35.268] 	Module class: X.Org XInput Driver
[    35.268] 	ABI class: X.Org XInput driver, version 21.0
[    35.268] (II) Using input driver 'evdev' for 'Power Button'
[    35.268] (**) Power Button: always reports core events
[    35.268] (**) evdev: Power Button: Device: "/dev/input/event2"
[    35.268] (--) evdev: Power Button: Vendor 0 Product 0x1
[    35.268] (--) evdev: Power Button: Found keys
[    35.268] (II) evdev: Power Button: Configuring as keyboard
[    35.268] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    35.268] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    35.268] (**) Option "xkb_rules" "evdev"
[    35.268] (**) Option "xkb_model" "pc105"
[    35.268] (**) Option "xkb_layout" "fr"
[    35.270] (II) XKB: reuse xkmfile /var/lib/xkb/server-1CA37FD61409D6C1EDB80880DF2DB1A574556A6A.xkm
[    35.270] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    35.270] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    35.270] (II) Using input driver 'evdev' for 'Video Bus'
[    35.270] (**) Video Bus: always reports core events
[    35.270] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    35.270] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    35.270] (--) evdev: Video Bus: Found keys
[    35.270] (II) evdev: Video Bus: Configuring as keyboard
[    35.270] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event7"
[    35.270] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    35.270] (**) Option "xkb_rules" "evdev"
[    35.271] (**) Option "xkb_model" "pc105"
[    35.271] (**) Option "xkb_layout" "fr"
[    35.271] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    35.271] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    35.271] (II) Using input driver 'evdev' for 'Video Bus'
[    35.271] (**) Video Bus: always reports core events
[    35.271] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    35.271] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    35.271] (--) evdev: Video Bus: Found keys
[    35.271] (II) evdev: Video Bus: Configuring as keyboard
[    35.271] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:07/LNXVIDEO:00/input/input7/event6"
[    35.271] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    35.271] (**) Option "xkb_rules" "evdev"
[    35.271] (**) Option "xkb_model" "pc105"
[    35.271] (**) Option "xkb_layout" "fr"
[    35.271] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    35.271] (II) No input driver specified, ignoring this device.
[    35.271] (II) This device may have been added with another device file.
[    35.271] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    35.271] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    35.271] (II) Using input driver 'evdev' for 'Sleep Button'
[    35.271] (**) Sleep Button: always reports core events
[    35.271] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    35.271] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    35.271] (--) evdev: Sleep Button: Found keys
[    35.271] (II) evdev: Sleep Button: Configuring as keyboard
[    35.271] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    35.271] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    35.271] (**) Option "xkb_rules" "evdev"
[    35.271] (**) Option "xkb_model" "pc105"
[    35.271] (**) Option "xkb_layout" "fr"
[    35.272] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event8)
[    35.272] (II) No input driver specified, ignoring this device.
[    35.272] (II) This device may have been added with another device file.
[    35.272] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event5)
[    35.272] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    35.272] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[    35.272] (**) PixArt USB Optical Mouse: always reports core events
[    35.272] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event5"
[    35.272] (--) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510
[    35.272] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
[    35.272] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[    35.272] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[    35.272] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[    35.272] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[    35.272] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[    35.272] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    35.272] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    35.272] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:093A:2510.0001/input/input6/event5"
[    35.272] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 10)
[    35.272] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[    35.272] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[    35.272] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[    35.272] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[    35.272] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[    35.272] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse1)
[    35.272] (II) No input driver specified, ignoring this device.
[    35.272] (II) This device may have been added with another device file.
[    35.272] (II) config/udev: Adding input device USB Camera (/dev/input/event12)
[    35.272] (**) USB Camera: Applying InputClass "evdev keyboard catchall"
[    35.272] (II) Using input driver 'evdev' for 'USB Camera'
[    35.272] (**) USB Camera: always reports core events
[    35.272] (**) evdev: USB Camera: Device: "/dev/input/event12"
[    35.272] (--) evdev: USB Camera: Vendor 0xbda Product 0x570c
[    35.272] (--) evdev: USB Camera: Found keys
[    35.272] (II) evdev: USB Camera: Configuring as keyboard
[    35.272] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input13/event12"
[    35.272] (II) XINPUT: Adding extended input device "USB Camera" (type: KEYBOARD, id 11)
[    35.272] (**) Option "xkb_rules" "evdev"
[    35.272] (**) Option "xkb_model" "pc105"
[    35.272] (**) Option "xkb_layout" "fr"
[    35.273] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    35.273] (II) No input driver specified, ignoring this device.
[    35.273] (II) This device may have been added with another device file.
[    35.273] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[    35.273] (II) No input driver specified, ignoring this device.
[    35.273] (II) This device may have been added with another device file.
[    35.273] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event11)
[    35.273] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    35.273] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[    35.273] (**) Asus WMI hotkeys: always reports core events
[    35.273] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event11"
[    35.273] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[    35.273] (--) evdev: Asus WMI hotkeys: Found keys
[    35.273] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[    35.273] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input12/event11"
[    35.273] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[    35.273] (**) Option "xkb_rules" "evdev"
[    35.273] (**) Option "xkb_model" "pc105"
[    35.273] (**) Option "xkb_layout" "fr"
[    35.273] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    35.273] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    35.273] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    35.273] (**) AT Translated Set 2 keyboard: always reports core events
[    35.273] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    35.273] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    35.273] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    35.273] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    35.273] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    35.273] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    35.273] (**) Option "xkb_rules" "evdev"
[    35.273] (**) Option "xkb_model" "pc105"
[    35.273] (**) Option "xkb_layout" "fr"
[    35.274] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event4)
[    35.274] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    35.274] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    35.274] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    35.274] (II) LoadModule: "synaptics"
[    35.274] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    35.283] (II) Module synaptics: vendor="X.Org Foundation"
[    35.283] 	compiled for 1.16.0, module version = 1.8.99
[    35.283] 	Module class: X.Org XInput Driver
[    35.283] 	ABI class: X.Org XInput driver, version 21.0
[    35.283] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    35.283] (**) ETPS/2 Elantech Touchpad: always reports core events
[    35.283] (**) Option "Device" "/dev/input/event4"
[    35.288] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[    35.288] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3097 (res 31)
[    35.288] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[    35.288] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    35.288] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    35.288] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[    35.288] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    35.288] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    35.288] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    35.288] (**) ETPS/2 Elantech Touchpad: always reports core events
[    35.308] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[    35.308] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[    35.308] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    35.308] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    35.308] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.053
[    35.308] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    35.308] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    35.308] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    35.308] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    35.308] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    35.308] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[    35.308] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    43.624] (II) intel(0): EDID vendor "CMN", prod id 5928
[    43.624] (II) intel(0): Printing DDC gathered Modelines:
[    43.624] (II) intel(0): Modeline "1600x900"x0.0  107.80  1600 1648 1680 1940  900 903 908 926 +hsync -vsync (55.6 kHz eP)
[    59.880] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    60.293] (II) XKB: reuse xkmfile /var/lib/xkb/server-4CCA0437B0B5529C7C44C7931A7373D005909F34.xkm
[    60.323] (II) XKB: reuse xkmfile /var/lib/xkb/server-4CCA0437B0B5529C7C44C7931A7373D005909F34.xkm
[    73.808] (II) XKB: reuse xkmfile /var/lib/xkb/server-500973B6F09A52700C4E9B62920EB235C5BB3956.xkm
[  3298.158] (II) config/udev: Adding drm device (/dev/dri/card1) card1 /sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/drm/card1
[  3298.158] (II) xfree86: Adding drm device (/dev/dri/card1)
[  3298.158] (II) config/udev: Ignoring already known drm device (/dev/dri/card1)
[  3298.159] removing GPU device /sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/drm/card1 /dev/dri/card1

Curiosity

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

bonjours à tous,
Je pense que je suis concerné par ce lourd problème, je constate que de plus en plus, les constructeurs nous laissent tomber, tout est tourné vers Windows : flash, ces satanés cartes
et que sais-je encor.. l’argent et toujours l’argent . Enfin..on essai de bricoler comme on peut.
voila lien que j'ai ouvert parapport à ce probable : http://forum.ubuntu-fr.org/viewtopic.php?id=1847231
ces modits cartes sont bien là

sam@sam-HP-Pavilion-dv7-Notebook-PC:~$ lspci -vnn | egrep 'VGA|3D'
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760] (rev ff) (prog-if ff)
sam@sam-HP-Pavilion-dv7-Notebook-PC:~$ 

ljere, que je remercie beaucoup, m'as ouvert les yeux sur ce problème dont j'ignorais l'existence, il m'as bien donné une solution dans ces deux commandes :

sudo su

passer en root

echo DDIS > /sys/kernel/debug/vgaswitcheroo/switch

avec lesquelles le probleme d'affigage est redevenu normale. Sauf que, au redmmarge le moche-affichage reprend le desus.
si c'est bien un problème de cartes graphiques, je vous prie de me trouver une une solution, et apparemment celle va aller en s'aggravent, puisque les orid poste 2009 sont concernés, si j'ai bien compris

---

Le savoir c'est la supériorité ! rien ne doit le gêner faute de quoi, on se condamne à une éternelle infériorité.
Toujours un grand merci  pour  vos réponses. 
Xubuntu 14.04.02

ljere

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

curiosity tu t'es placé dans une mauvaise discussion, il s'agit en effet ici de nvidia alors que dans ton cas il s'agit d'une carte ATI

---

ancien PC Toshiba satellite_c670d-11 / Linux Mint 21 Vanessa
Nouveau PC ASUS TUF GAMING A17 GPU RTX 4070 CPU AMD Ryzen 9 7940HS w/ Radeon 780M Graphics / Linux Mint 21.2 Victoria / Kernel: 6.4.8-1-liquorix / Desktop: Cinnamon

FS

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bonjour,

Comme vous pouvez vous en douter, j'ai moi aussi un problème.
Tout d'abord, voici ma configuration :

Ubuntu 14.04
Cartes :
Nvidia :GEforce840M
Intel : Haswell-ULT Integrated Graphics Controller

J'ai installé bumblebee. Mais lorsque que j'exécute n'importe quoi avec optirun, je reçois le message suivant :

[ 3298.372948] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) [drm] KMS not enabled

[ 3298.372984] [ERROR]Aborting because fallback start is disabled.

Bonjour palima

si je peux aider .... !

moi aussi j' ai des problèmes avec mon ordi asus et les cartes graphique cpu intel et nvidia GTX 870M

mais ma config fonctionne presque:

j' ai d'abord instalé bumbleebe
puis avec l' utilitaire "pilote additionnel" j'ai changer le pilote xorg par un pilote propriétaire nvidia 331.113 ...(propriétaire,testé)
puis redémaré
la commande "vblank_mode=0 optirun glxgears" fonctionne dans un terminal et je peux lancer des logiciels avec optirun

!!!!! Le point noir : les rérultats de "vblank_mode=0 optirun glxgears" sont 2x moins bon que "vblank_mode=0 glxgears" valeur 3500 environ contre 7000 pour la carte intel intégrée au cpu
de plus avec ou sans bumbleebe je n'ai pas de son sur la sortie hdmi

bon courage!
c'est bien dommage cela fait 8 ans que j'utilise ubuntu mais ce genre de problème semble aller de paire avec les nouvelles machines.

Dernière modification par FS (Le 03/06/2015, à 22:09)

Curiosity

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

we have a problem ! je pense

---

Le savoir c'est la supériorité ! rien ne doit le gêner faute de quoi, on se condamne à une éternelle infériorité.
Toujours un grand merci  pour  vos réponses. 
Xubuntu 14.04.02

palima

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Bonjour FS,

C'est une bonne idée de tester une ancienne version de pilotes vu que c'est un problème récent. Et en effet avec la version 331, chez moi, ça marche (en fait ça met un autre message d'erreur : "cannot acess secondary gpu" mais qui est résolvable grâce à cette astuce : https://askubuntu.com/questions/165347/ … umblebee.)
Ca marche aussi avec la version 340.

Mais malheureusement, les logiciels (Starcraft 2 sous Wine pour mon cas) exigent souvent la dernière version des drivers pour fonctionner ...

Et justement, installer la version 346 fait buguer l'ordinateur : pas d'interface graphique qui se charge et je suis obligé de désinstaller via la console. Même tenter de passer par "pilotes additionnels" pour y mettre "Utilisation de NVIDIA binary drivers version Y depuis nvidia-X (libre)", (Y,X) valant  (346.72, 346), (349.16, 349), (352.09, 352) provoque le même problème.

Merci de me souhaiter bon courage, mais du coup je crois que je vais juste attendre que les développeurs arrivent à rattraper Nvidia et sortent une version mise à jour.
Mets nous au courant si tu testes quelque chose !

Marzikill

Re : Ordinateurs Portables - Deux cartes graphiques - NVIDIA Optimus

Effectivement, je suis dans la même situation que toi Palima: j'ai récemment acheté un pc (peut être un peu trop récent pour linux finalement...) muni d'une GTX 950M. Ce qui fait que je devrais utiliser les drivers 346 au minimum pour faire fonctionner ma carte sauf que comme tu l'as dit, si je les utilise, écran noir, impossible de rien faire. La seule solution est d'attendre donc que les dev' règlent tout ça?