#26 Le 26/04/2015, à 19:31
- chacha.blue
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
Dans à propos de cet ordinateur il est indiqué
Mémoire : 7,7 Gio
Carte Graphique : Intel® Haswell Mobile
Disque : 976,0 Go
Hors ligne
#27 Le 26/04/2015, à 20:50
- nam1962
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
Bon, normalement c'est un monstre.
Pas de raison d'avoir un quelconque problème.
Comme tu tombes sur moi, je te propose une Xubuntu : ftp://ftp.free.fr/mirrors/ftp.xubuntu.c … -amd64.iso
Tu peux en faire ce que tu veux ensuite : http://forum.ubuntu-fr.org/viewtopic.php?id=1670281
Sauvegarde tes données si tu en as déjà.
Puis au moment de l'installation choisis "autre chose"
Là fais un / de 50Go en ext4
une swap de 8Go
Le reste en /home en ext4
Tout est bien expliqué là : http://openclassrooms.com/courses/repre … son-disque
[ Modéré ]
Hors ligne
#28 Le 26/04/2015, à 21:02
- chacha.blue
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
Mince, j'ai vu ton message un peu tard.... Je regarde tout ça dès que possible et me reconnecte dans la semaine.
Juste une dernière question de débutante : c'est quoi la différence entre ubuntu et xubuntu ? je commençais à peine à m'y retrouver dans le premier...
Hors ligne
#29 Le 26/04/2015, à 21:16
- Babdu89
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
@ nam1962
Post#4 dans df -Th,
Tu as vu? un hdd partitionné en GPT.
Tu as vu ? une partition /dev/sda1 /boot/efi
Donc;
Cette machine est en UEFI. Si elle démarre en UEFI, on ne peut pas installer en mode Bios_Legacy.
Le partitionnement n'est pas le même.
Soit on démarre la machine en mode UEFI (c'est peut-être son mode actuel ) on install en UEFI.
Soit on démarre la machine en mode Bios_Legay en faisant les changement dans le Bios/UEFI, pour changer le mode de démarrage et donc d'installation.
En tout cas, c'est ce que j'ai retenu de tous les écrits, doc, tuto et aides de malbo et bien d'autres.
L'UEFI, je ne connais pas assez pour aider, mais suffisamment pour avertir et éviter de faire fausse route...
Édit;
Pour l'UEFI.
Il faut aussi une iso qui convienne pour le UEFI (64 bit compatible UEFI.)
Et il faut que la session live pour tester/installer soit lancée en UEFI...
@+. Babdu89 .
Dernière modification par Babdu89 (Le 26/04/2015, à 21:19)
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#30 Le 26/04/2015, à 21:18
- nam1962
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
Xubuntu est plus simple, plus légère, plus adaptable et plus robuste 
La différence tient dans le gestionnaire d'environnement : Xfce pour Xubuntu, Unity pour Ubuntu.
Pour l'usage et les logiciels, tout tourne pareil ! (plus vite sous Xub)
Xubuntu a parfois souffert d'une image de distribution pour ordi ancien, mais tous mes ordis récents tournent dessus et...sont ravis !
Dernière modification par nam1962 (Le 26/04/2015, à 21:26)
[ Modéré ]
Hors ligne
#31 Le 26/04/2015, à 21:19
- Babdu89
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
nam, tu as lu post#29?
@. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#32 Le 26/04/2015, à 21:21
- nam1962
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
On postait en même temps.
Pas de problème : secure boot désactivé, l'iso que je propose tournera comme une horloge en UEFI
[ Modéré ]
Hors ligne
#33 Le 26/04/2015, à 21:23
- Babdu89
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
Ok!. je continue de suivre avec attention.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#34 Le 29/04/2015, à 16:31
- chacha.blue
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
Enfin un petit moment pour m'y recoller...
Sauvegarde en cours.
Par contre je n'arrive pas à me décider pour Xubuntu.... Mes amis sont sous Ubuntu, et je commence juste à m'y retrouver...
Est-ce que je peux juste réinstaller Ubuntu avec le CD que j'avais gravé pour ma première instal, mais en faisant les partition manuelles que tu me conseille ?
Et un grand merci pour le lien open classroom :-)
Hors ligne
#35 Le 29/04/2015, à 16:43
- nam1962
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
Cela fonctionne pour toute variante
[ Modéré ]
Hors ligne
#36 Le 29/04/2015, à 17:03
- chacha.blue
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
Alors je m'y remets dès que possible et te tiens au courant !
Merci beaucoup !!!
Hors ligne
#37 Le 01/05/2015, à 12:11
- chacha.blue
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
Je me suis lancée, j'ai fait les 3 partitions de ton message mais là je bloque !
> on me demande de rajouter une EFI boot partition "for boot loader code" de 35 M au moins...
Mais je sais pas faire....
Hors ligne
#38 Le 01/05/2015, à 15:13
- nam1962
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
Ahh. tu reviens juste sur l'écran précédent et tu ajoutes une partition (mets 52 Mo)
[ Modéré ]
Hors ligne
#39 Le 01/05/2015, à 15:25
- chacha.blue
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
Ca y est j'ai réinstallé en partitionnant avec ajout d'une partition démarrage efi, ça donne :
/dev/sda
espce libre 1M
/dev/sda1 efi 248M
/dev/sda2 ext4 / 50000M
/dev/sda3 swap 8000M
/dev/sda4 ext4 /home 941954M
espace libre 0M
Ca a redémarré, fait les mises à jours, mais juste avant de voir la fenêtre d'ouverture de session j'ai un message qui apparait et disparait très vite, sur fond noir, qui dit :
9.470439] mei_me 0000:00:16.0: version message write failed ret = -5
9.470439] mei_me 0000:00:16.0: hbm_start failed ret = -5
9.470439] mei_me 0000:00:16.0: reset failed
9.470439] mei_me 0000:00:16.0: link layer initialization failed.
9.470439] mei_me 0000:00:16.0: init hw failure.
9.470439] mei_me 0000:00:16.0: initialization failed.
Oups.....
Dernière modification par chacha.blue (Le 01/05/2015, à 17:23)
Hors ligne
#40 Le 01/05/2015, à 19:45
- nam1962
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
C'est peut être un problème mineur de bios, quel processeur as tu ? (intel/AMD ?)
[ Modéré ]
Hors ligne
#41 Le 02/05/2015, à 11:13
- chacha.blue
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
C'est un intel.
Hors ligne
#42 Le 02/05/2015, à 11:48
- nam1962
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
Essaie déjà en ajoutant le microcode :
sudo apt-get install intel-microcode[ Modéré ]
Hors ligne
#43 Le 02/05/2015, à 11:58
- chacha.blue
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
J'ai tapé la commande puis redémarré mais le même message apparaît (avec juste les chiffres après le 9 qui changent).
Hors ligne
#44 Le 02/05/2015, à 12:19
- nany
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
Bonjour,
le message est lié au module Ethernet de la carte mère.
Passe la commande suivante et redémarre pour voir si le message apparaît toujours.
echo "blacklist mei" | sudo tee -a /etc/modprobe.d/blacklist.confEn ligne
#45 Le 02/05/2015, à 12:28
- chacha.blue
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
Même message après commande et redémarrage.
Hors ligne
#46 Le 02/05/2015, à 12:41
- alca94
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
donc la "partition" c'est celle proposée lors de l'installation automatique...
c'est pas possible en Auto il n'y a pas de /boot ? et en général ça ne coince jamais par manque de place a cause des kernels
POUR METTRE LES RETOURS DU "TERMINAL" voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641
Hors ligne
#47 Le 02/05/2015, à 13:23
- nany
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
chacha.blue a écrit :
Même message après commande et redémarrage.
Alors essaie cette commande supplémentaire :
sudo sh -c 'echo "install mei /bin/true" > /etc/modprobe.d/mei.conf'En ligne
#48 Le 02/05/2015, à 13:40
- chacha.blue
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
Il y a eu un nouveau message au premier redémarrage après commande, mais je n'ai pas pu le lire.
Un différent est apparu après éteindre et redémarrer, mais depuis j'ai fait plusieurs redémarrage et plus rien....
Est-ce que c'est rentré dans l'ordre ? Quelque chose à faire pour vérifier ?
Hors ligne
#49 Le 02/05/2015, à 13:46
- nany
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
alca94 a écrit :
[…]
c'est pas possible en Auto il n'y a pas de /boot ? […]
C’est une question ou une affirmation ?
chacha.blue a écrit :
[…] Quelque chose à faire pour vérifier ?
Donne le retour (entre balises code comme expliqué ici) de cette commande :
dmesgEn ligne
#50 Le 02/05/2015, à 13:53
- chacha.blue
Re : problème de mise à jour et de place sur disque - ubuntu 14.04 RESOLU
ith CONFIG_ACPI_PROCFS_POWER cleared
[ 0.793395] ACPI: Battery Slot [BAT0] (battery present)
[ 0.793877] brd: module loaded
[ 0.794548] loop: module loaded
[ 0.794922] libphy: Fixed MDIO Bus: probed
[ 0.795011] tun: Universal TUN/TAP device driver, 1.6
[ 0.795013] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.795054] PPP generic driver version 2.4.2
[ 0.795093] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.795097] ehci-pci: EHCI PCI platform driver
[ 0.795226] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.795233] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.795246] ehci-pci 0000:00:1d.0: debug port 2
[ 0.799157] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.799182] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000
[ 0.808143] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.808195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.808197] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808199] usb usb1: Product: EHCI Host Controller
[ 0.808201] usb usb1: Manufacturer: Linux 3.13.0-51-generic ehci_hcd
[ 0.808203] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.808344] hub 1-0:1.0: USB hub found
[ 0.808351] hub 1-0:1.0: 2 ports detected
[ 0.808478] ehci-platform: EHCI generic platform driver
[ 0.808488] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.808490] ohci-pci: OHCI PCI platform driver
[ 0.808499] ohci-platform: OHCI generic platform driver
[ 0.808505] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.808642] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.808647] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.808734] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.808754] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 0.808816] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.808819] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808821] usb usb2: Product: xHCI Host Controller
[ 0.808823] usb usb2: Manufacturer: Linux 3.13.0-51-generic xhci_hcd
[ 0.808824] usb usb2: SerialNumber: 0000:00:14.0
[ 0.808952] hub 2-0:1.0: USB hub found
[ 0.808963] hub 2-0:1.0: 9 ports detected
[ 0.812127] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.812140] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.812185] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.812187] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.812189] usb usb3: Product: xHCI Host Controller
[ 0.812191] usb usb3: Manufacturer: Linux 3.13.0-51-generic xhci_hcd
[ 0.812193] usb usb3: SerialNumber: 0000:00:14.0
[ 0.812318] hub 3-0:1.0: USB hub found
[ 0.812329] hub 3-0:1.0: 4 ports detected
[ 0.820236] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.821973] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.821979] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.822308] mousedev: PS/2 mouse device common for all mice
[ 0.822749] rtc_cmos 00:05: RTC can wake from S4
[ 0.822884] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.822915] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.822991] device-mapper: uevent: version 1.0.3
[ 0.823072] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.823080] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.823082] EFI Variables Facility v0.08 2004-May-17
[ 0.825653] TCP: cubic registered
[ 0.825753] NET: Registered protocol family 10
[ 0.825932] NET: Registered protocol family 17
[ 0.825944] Key type dns_resolver registered
[ 0.826288] Loading compiled-in X.509 certificates
[ 0.827470] Loaded X.509 cert 'Magrathea: Glacier signing key: 822a539beb8b756f177fe044df9855a99939619e'
[ 0.827482] registered taskstats version 1
[ 0.830184] Key type trusted registered
[ 0.834130] Key type encrypted registered
[ 0.834137] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.834139] IMA: No TPM chip found, activating TPM-bypass!
[ 0.834664] regulator-dummy: disabling
[ 0.834719] Magic number: 15:887:629
[ 0.834839] rtc_cmos 00:05: setting system clock to 2015-05-02 11:37:23 UTC (1430566643)
[ 0.835717] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.835719] EDD information not available.
[ 0.835770] PM: Hibernation image not present or could not be loaded.
[ 0.836637] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 0.836639] Write protecting the kernel read-only data: 12288k
[ 0.838334] Freeing unused kernel memory: 792K (ffff88000173a000 - ffff880001800000)
[ 0.839658] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[ 0.852236] systemd-udevd[114]: starting version 204
[ 0.855452] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.878605] ahci 0000:00:1f.2: version 3.0
[ 0.878736] ahci 0000:00:1f.2: irq 57 for MSI/MSI-X
[ 0.878761] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.886445] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [38:2c:4a:85:c9:c2]
[ 0.892203] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 0.892209] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 0.892895] scsi0 : ahci
[ 0.892993] scsi1 : ahci
[ 0.893072] scsi2 : ahci
[ 0.893126] scsi3 : ahci
[ 0.893164] ata1: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a100 irq 57
[ 0.893166] ata2: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a180 irq 57
[ 0.893168] ata3: DUMMY
[ 0.893169] ata4: DUMMY
[ 1.120065] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.211983] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.252277] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.252282] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.252543] hub 1-1:1.0: USB hub found
[ 1.252602] hub 1-1:1.0: 8 ports detected
[ 1.260509] ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX0R2J, max UDMA/100
[ 1.260514] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.262430] ata1.00: configured for UDMA/100
[ 1.262585] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 AX0R PQ: 0 ANSI: 5
[ 1.262733] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.262738] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.262765] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.262798] sd 0:0:0:0: [sda] Write Protect is off
[ 1.262803] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.262831] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.374527] sda: sda1 sda2 sda3 sda4
[ 1.375033] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.419902] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 1.439014] usb 2-1: New USB device found, idVendor=090c, idProduct=1000
[ 1.439019] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.439022] usb 2-1: Product: USB Flash Disk
[ 1.439024] usb 2-1: Manufacturer: General
[ 1.439025] usb 2-1: SerialNumber: 7311040000214104
[ 1.439202] usb 2-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 1.439207] usb 2-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 1.442206] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 1.442276] scsi4 : usb-storage 2-1:1.0
[ 1.442344] usbcore: registered new interface driver usb-storage
[ 1.579781] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.581980] ata2.00: ATAPI: HL-DT-ST DVDRAM GUA0N, AS00, max UDMA/133
[ 1.583473] ata2.00: configured for UDMA/133
[ 1.588169] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUA0N AS00 PQ: 0 ANSI: 5
[ 1.593902] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.593906] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.594079] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.594172] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.603730] usb 2-5: new high-speed USB device number 3 using xhci_hcd
[ 1.652847] usb 2-5: New USB device found, idVendor=04f2, idProduct=b40a
[ 1.652852] usb 2-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.652855] usb 2-5: Product: USB2.0 HD UVC WebCam
[ 1.652856] usb 2-5: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.652858] usb 2-5: SerialNumber: 0x0001
[ 1.723692] tsc: Refined TSC clocksource calibration: 2294.688 MHz
[ 1.965883] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.720024] random: init urandom read with 120 bits of entropy available
[ 2.723239] Switched to clocksource tsc
[ 2.791247] random: nonblocking pool is initialized
[ 2.935560] scsi 4:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
[ 2.935824] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.936127] sd 4:0:0:0: [sdb] 31506432 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 2.936931] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.936936] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2.937818] sd 4:0:0:0: [sdb] No Caching mode page found
[ 2.937823] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2.940583] sd 4:0:0:0: [sdb] No Caching mode page found
[ 2.940588] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2.941683] sdb: sdb1
[ 2.944122] sd 4:0:0:0: [sdb] No Caching mode page found
[ 2.944126] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2.944129] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3.302944] init: plymouth-upstart-bridge main process (184) terminated with status 1
[ 3.302956] init: plymouth-upstart-bridge main process ended, respawning
[ 3.305217] init: plymouth-upstart-bridge main process (195) terminated with status 1
[ 3.305228] init: plymouth-upstart-bridge main process ended, respawning
[ 3.306570] init: plymouth-upstart-bridge main process (197) terminated with status 1
[ 3.306577] init: plymouth-upstart-bridge main process ended, respawning
[ 3.308077] init: plymouth-upstart-bridge main process (198) terminated with status 1
[ 3.308085] init: plymouth-upstart-bridge main process ended, respawning
[ 3.309303] init: plymouth-upstart-bridge main process (200) terminated with status 1
[ 3.309310] init: plymouth-upstart-bridge main process ended, respawning
[ 3.311253] init: plymouth-upstart-bridge main process (201) terminated with status 1
[ 3.311265] init: plymouth-upstart-bridge main process ended, respawning
[ 3.312505] init: plymouth-upstart-bridge main process (204) terminated with status 1
[ 3.312514] init: plymouth-upstart-bridge main process ended, respawning
[ 3.314006] init: plymouth-upstart-bridge main process (205) terminated with status 1
[ 3.314013] init: plymouth-upstart-bridge main process ended, respawning
[ 3.315263] init: plymouth-upstart-bridge main process (207) terminated with status 1
[ 3.315272] init: plymouth-upstart-bridge main process ended, respawning
[ 3.316910] init: plymouth-upstart-bridge main process (208) terminated with status 1
[ 3.316921] init: plymouth-upstart-bridge main process ended, respawning
[ 3.318769] init: plymouth-upstart-bridge main process (210) terminated with status 1
[ 3.318776] init: plymouth-upstart-bridge respawning too fast, stopped
[ 3.913720] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 9.329626] Adding 7812092k swap on /dev/sda3. Priority:-1 extents:1 across:7812092k FS
[ 9.372360] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.400984] systemd-udevd[312]: starting version 204
[ 9.468159] lp: driver loaded but no devices found
[ 9.472671] ppdev: user-space parallel port driver
[ 9.488554] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.502352] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \GPIS 1 (20131115/utaddress-251)
[ 9.502359] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 2 (20131115/utaddress-251)
[ 9.502365] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.502369] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 9.502373] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
[ 9.502377] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 3 (20131115/utaddress-251)
[ 9.502381] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.502382] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 9.502386] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
[ 9.502390] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 3 (20131115/utaddress-251)
[ 9.502393] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.502395] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.509959] [drm] Initialized drm 1.1.0 20060810
[ 9.520705] wmi: Mapper loaded
[ 9.539013] cfg80211: Calling CRDA to update world regulatory domain
[ 9.539677] mei_me: Unknown symbol mei_start (err 0)
[ 9.539705] mei_me: Unknown symbol mei_deregister (err 0)
[ 9.539713] mei_me: Unknown symbol mei_cancel_work (err 0)
[ 9.539720] mei_me: Unknown symbol mei_irq_read_handler (err 0)
[ 9.539726] mei_me: Unknown symbol mei_stop (err 0)
[ 9.539732] mei_me: Unknown symbol mei_register (err 0)
[ 9.539746] mei_me: Unknown symbol mei_irq_compl_handler (err 0)
[ 9.539752] mei_me: Unknown symbol mei_restart (err 0)
[ 9.539761] mei_me: Unknown symbol mei_device_init (err 0)
[ 9.539767] mei_me: Unknown symbol mei_irq_write_handler (err 0)
[ 9.544920] type=1400 audit(1430566652.210:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=373 comm="apparmor_parser"
[ 9.544928] type=1400 audit(1430566652.210:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=373 comm="apparmor_parser"
[ 9.544933] type=1400 audit(1430566652.210:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=373 comm="apparmor_parser"
[ 9.545460] type=1400 audit(1430566652.210:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=373 comm="apparmor_parser"
[ 9.545467] type=1400 audit(1430566652.210:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=373 comm="apparmor_parser"
[ 9.545748] type=1400 audit(1430566652.210:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=373 comm="apparmor_parser"
[ 9.550730] MXM: GUID detected in BIOS
[ 9.550989] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[ 9.551073] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 9.551153] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 9.551954] pci 0000:04:00.0: optimus capabilities: enabled, status dynamic power,
[ 9.551958] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP05.PEGP handle
[ 9.551974] checking generic (d0000000 408000) vs hw (e0000000 10000000)
[ 9.551976] checking generic (d0000000 408000) vs hw (f0000000 2000000)
[ 9.556748] [drm] Memory usable by graphics device = 2048M
[ 9.556753] checking generic (d0000000 408000) vs hw (d0000000 10000000)
[ 9.556756] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 9.556774] Console: switching to colour dummy device 80x25
[ 9.610840] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0013 detected
[ 9.618872] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[ 9.627309] i915 0000:00:02.0: irq 58 for MSI/MSI-X
[ 9.627322] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.627323] [drm] Driver supports precise vblank timestamp query.
[ 9.627404] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.635559] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.726283] asus_wmi: ASUS WMI generic driver loaded
[ 9.727592] asus_wmi: Initialization: 0x1
[ 9.727636] asus_wmi: BIOS WMI version: 7.9
[ 9.727687] asus_wmi: SFUN value: 0x4a0877
[ 9.728728] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input6
[ 9.747152] asus_wmi: Backlight controlled by ACPI video driver
[ 9.750680] fbcon: inteldrmfb (fb0) is primary device
[ 9.807446] Linux video capture interface: v2.00
[ 9.812708] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b40a)
[ 9.813880] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input7
[ 9.813962] usbcore: registered new interface driver uvcvideo
[ 9.813963] USB Video Class driver (1.1.1)
[ 9.848483] cfg80211: World regulatory domain updated:
[ 9.848484] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.848487] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.848488] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.848489] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.848490] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.848490] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.616589] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 10.790741] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 11.062970] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 11.378332] Console: switching to colour frame buffer device 170x48
[ 11.381629] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 11.381631] i915 0000:00:02.0: registered panic notifier
[ 11.382089] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 11.401350] init: failsafe main process (642) killed by TERM signal
[ 11.404098] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 11.408264] acpi device:16: registered as cooling_device5
[ 11.408320] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:00/input/input8
[ 11.410919] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.414407] acpi device:78: registered as cooling_device6
[ 11.426405] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 11.426527] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 11.426808] HDA driver get symbol successfully from i915 module
[ 11.427081] [drm] hdmi device not found 4 0 1
[ 11.427394] nouveau [ DEVICE][0000:04:00.0] BOOT0 : 0x0d7000a2
[ 11.427399] nouveau [ DEVICE][0000:04:00.0] Chipset: GF117 (NVD7)
[ 11.427402] nouveau [ DEVICE][0000:04:00.0] Family : NVD0
[ 11.428217] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 11.430248] nouveau [ VBIOS][0000:04:00.0] checking PRAMIN for image...
[ 11.473385] nouveau [ VBIOS][0000:04:00.0] ... signature not found
[ 11.473388] nouveau [ VBIOS][0000:04:00.0] checking PROM for image...
[ 11.473426] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
[ 11.473457] nouveau [ VBIOS][0000:04:00.0] ... signature not found
[ 11.473460] nouveau [ VBIOS][0000:04:00.0] checking ACPI for image...
[ 11.479815] hda_codec: CX20751/2: BIOS auto-probing.
[ 11.480024] autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 11.480026] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.480027] hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 11.480028] mono: mono_out=0x0
[ 11.480028] inputs:
[ 11.480029] Internal Mic=0x1a
[ 11.480030] Mic=0x19
[ 11.480709] hda_codec: Enable sync_write for stable communication
[ 11.482469] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 11.482542] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 11.490356] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 11.491104] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 11.491293] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 11.713826] type=1400 audit(1430566654.378:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=741 comm="apparmor_parser"
[ 11.713836] type=1400 audit(1430566654.378:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=741 comm="apparmor_parser"
[ 11.714618] type=1400 audit(1430566654.382:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=741 comm="apparmor_parser"
[ 11.816956] init: cups main process (743) killed by HUP signal
[ 11.816965] init: cups main process ended, respawning
[ 11.941249] Bluetooth: Core ver 2.17
[ 11.941267] NET: Registered protocol family 31
[ 11.941269] Bluetooth: HCI device and connection manager initialized
[ 11.941277] Bluetooth: HCI socket layer initialized
[ 11.941280] Bluetooth: L2CAP socket layer initialized
[ 11.941284] Bluetooth: SCO socket layer initialized
[ 11.943813] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.943816] Bluetooth: BNEP filters: protocol multicast
[ 11.943824] Bluetooth: BNEP socket layer initialized
[ 11.945036] Bluetooth: RFCOMM TTY layer initialized
[ 11.945044] Bluetooth: RFCOMM socket layer initialized
[ 11.945048] Bluetooth: RFCOMM ver 1.11
[ 12.434490] alx 0000:02:00.0: irq 61 for MSI/MSI-X
[ 12.434561] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.435339] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.436631] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[ 12.463786] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[ 12.561896] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.562200] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.657989] nouveau [ VBIOS][0000:04:00.0] ... appears to be valid
[ 12.657994] nouveau [ VBIOS][0000:04:00.0] using image from ACPI
[ 12.658108] nouveau [ VBIOS][0000:04:00.0] BIT signature found
[ 12.658112] nouveau [ VBIOS][0000:04:00.0] version 75.17.5c.00.02
[ 12.658304] nouveau [ VBIOS][0000:04:00.0] running init tables
[ 12.740646] nouveau 0000:04:00.0: irq 62 for MSI/MSI-X
[ 12.740663] nouveau [ PMC][0000:04:00.0] MSI interrupts enabled
[ 12.740707] nouveau W[ PFB][0000:04:00.0][0x00000000][ffff8802200b2000] reclocking of this ram type unsupported
[ 12.740710] nouveau [ PFB][0000:04:00.0] RAM type: DDR3
[ 12.740711] nouveau [ PFB][0000:04:00.0] RAM size: 2048 MiB
[ 12.740713] nouveau [ PFB][0000:04:00.0] ZCOMP: 0 tags
[ 13.669777] wlan0: authenticate with f4:ca:e5:94:ae:4c
[ 13.677154] wlan0: send auth to f4:ca:e5:94:ae:4c (try 1/3)
[ 13.678616] wlan0: authenticated
[ 13.681012] wlan0: associate with f4:ca:e5:94:ae:4c (try 1/3)
[ 13.685418] wlan0: RX AssocResp from f4:ca:e5:94:ae:4c (capab=0x411 status=0 aid=1)
[ 13.685561] wlan0: associated
[ 13.685591] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 14.024807] nouveau [ PTHERM][0000:04:00.0] FAN control: none / external
[ 14.024822] nouveau [ PTHERM][0000:04:00.0] internal sensor: yes
[ 14.024860] nouveau [ CLK][0000:04:00.0] 07: core 270 MHz memory 405 MHz
[ 14.024872] nouveau [ CLK][0000:04:00.0] 0f: core 625 MHz memory 800 MHz
[ 14.025053] nouveau [ CLK][0000:04:00.0] --: core 270 MHz memory 324 MHz
[ 14.031470] vga_switcheroo: enabled
[ 14.031626] [TTM] Zone kernel: Available graphics memory: 4028730 kiB
[ 14.031628] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 14.031629] [TTM] Initializing pool allocator
[ 14.031635] [TTM] Initializing DMA pool allocator
[ 14.031644] nouveau [ DRM] VRAM: 2048 MiB
[ 14.031646] nouveau [ DRM] GART: 1048576 MiB
[ 14.031650] nouveau W[ DRM] Pointer to TMDS table invalid
[ 14.031652] nouveau [ DRM] DCB version 4.0
[ 14.031654] nouveau W[ DRM] Pointer to flat panel table invalid
[ 14.031668] nouveau [ DRM] ACPI backlight interface available, not registering our own
[ 14.041658] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 14.041666] [drm] Initialized nouveau 1.1.2 20120801 for 0000:04:00.0 on minor 1
[ 14.590124] type=1400 audit(1430566657.258:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=916 comm="apparmor_parser"
[ 14.590130] type=1400 audit(1430566657.258:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=916 comm="apparmor_parser"
[ 14.590332] type=1400 audit(1430566657.258:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=916 comm="apparmor_parser"
[ 14.591288] type=1400 audit(1430566657.258:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=917 comm="apparmor_parser"
[ 14.591297] type=1400 audit(1430566657.258:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=917 comm="apparmor_parser"
[ 14.591303] type=1400 audit(1430566657.258:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=917 comm="apparmor_parser"
[ 14.591846] type=1400 audit(1430566657.258:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=917 comm="apparmor_parser"
[ 14.591852] type=1400 audit(1430566657.258:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=917 comm="apparmor_parser"
[ 14.592140] type=1400 audit(1430566657.258:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=917 comm="apparmor_parser"
[ 14.594742] type=1400 audit(1430566657.262:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=921 comm="apparmor_parser"
[ 21.888509] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 21.888943] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 32.551721] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 41.804127] audit_printk_skb: 123 callbacks suppressed
[ 41.804130] type=1400 audit(1430566684.500:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2302 comm="apparmor_parser"
[ 41.804136] type=1400 audit(1430566684.500:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2302 comm="apparmor_parser"
[ 41.804464] type=1400 audit(1430566684.500:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2302 comm="apparmor_parser"
[ 211.861141] systemd-hostnamed[2615]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
chacha@chacha-X450LCP:~$ Hors ligne