Pages : 1
#1 Le 31/03/2008, à 11:37
- Seedfrid
Imprimantes port série
Bonjour.
afin de faire découvrir Ubuntu à mes anciens patron, je leur ai proposé de transformer leur système actuel (2 type différent pour une même application conçu pour ms-dos), en équipant les poste (serveur/client) avec ubuntu.
Pour le premier système celui-ci se compose d'un serveur netware 4.11 et 5 poste client qui accède à l'application DOS partagé sur le serveur. je n'ai pas encore trouvé comment changer.
Pour le 2ème système (plus facile) 2 poste sous win98 avec compatibilité netbios, un serveur de fichier + client sur le même poste avec 3 imprimantes, l'autre simplement client avec une base 98.
Après de nombreuse recherche et essai, j'ai fini par installer les 2 poste sous Ubuntu en émulant les Win 98 avec Virtualbox sur chaque poste. Ce qui reviens finalement à la solution de départ, mais en permettant un accès a Ubuntu et toutes ses possibilité.
Le système est plutôt stable et finalement fonctionne sans trop de configuration. seulement il reste un soucis pour les imprimantes.
le serveur possède un seul port imprimante (sur lequel est branché un switch) sur lequel sont les 2 première imprimantes. Celle ci se sont retrouvé détécté et installé très facilement par la fenetre de configuration de cups. les 2 sont fonctionnel.
Pour la 3eme imprimante celle-ci fonctionne en port série. La configurattion d'origine n'en possédant pas, j'ai donc ajouté une carte pci - série (2 port) afin de brancher cette dernière ainsi que le tirroir caisse, qui lui aussi fonctionne en port série.
Mais voila, j'ai parcourru la doc et le net, et je n'ai rien trouvé sur le fonctionnement des port séries sous Ubuntu.
Mon imprimante ou mon tirroir caisse branché, il n'y as aucune réaction du système et cups ne me propose aucun choix proposant ces ports.
C'est pourquoi je viens ici demander un peu d'aide, pour la première fois depuis que j'utilise Ubuntu, alors qu'aucun de mes problème n'est jamais resté sans solution.
Merci de votre aide
Seedfrid
Le Cheval de Troyes est un animal qui passe son temps a piéger les système corrompu. Il contient en son cœur de nombreux système libre qu'il relâche la journée venu dans la ville de Troyes
www.auchevaldetroyes.fr
Hors ligne
#2 Le 31/03/2008, à 11:51
- Pacifick_FR42
Re : Imprimantes port série
Tu peux renvoyer le retoure de commande de lspci ?
Hors ligne
#3 Le 31/03/2008, à 12:00
- Seedfrid
Re : Imprimantes port série
ok je passe les voir cette après midi.
mais il me semble que j'avais essayé (déduit de lsusb) et je ne crois pas que j'avais tiré une information suffisante je crois que ça parle seulement du chipset
ça doit etre mp61 je crois.
mais je ferais de toute façon un copier-coller si ça peut aider :s
sinon voici la config:
http://www.topachat.com/pages/pc-comple … ase=pa3236
. Processeur AMD Sempron LE-1150 (2.0 GHz) et son ventilateur certifié
. Mémoire DDR2 1 Go PC2-5300 (667 MHz) (Garantie à vie)
. Disque dur 160 Go Sata II / 7200 tpm
. Carte mère Gigabyte GA-M61SME-S2L évolutive Athlon 64 X2
(avec chip graphique nVidia GeForce 6100 intégré, SATA II Raid, son 7.1, réseau 100 Mbps, 4 ports USB 2.0, compatible Vista Premium)
. Boitier moyen tour ATX 420W avec USB en façade
Le Cheval de Troyes est un animal qui passe son temps a piéger les système corrompu. Il contient en son cœur de nombreux système libre qu'il relâche la journée venu dans la ville de Troyes
www.auchevaldetroyes.fr
Hors ligne
#4 Le 31/03/2008, à 12:02
- Pacifick_FR42
Re : Imprimantes port série
Ok, alors en plus du lspci, fais aussi un lsmod, dmesg
Hors ligne
#5 Le 31/03/2008, à 12:05
- Seedfrid
Re : Imprimantes port série
ça marche merci pour les infos je teste des que je peu et je reposte.
Le Cheval de Troyes est un animal qui passe son temps a piéger les système corrompu. Il contient en son cœur de nombreux système libre qu'il relâche la journée venu dans la ville de Troyes
www.auchevaldetroyes.fr
Hors ligne
#6 Le 31/03/2008, à 12:07
- Pacifick_FR42
Re : Imprimantes port série
ok, no blème 
Hors ligne
#7 Le 01/04/2008, à 11:02
- Seedfrid
Re : Imprimantes port série
Rebonjour, j'ai bien effectué les commandes que tu m'as demandé, mais n'ayant pas de connexion internet sur le pc (et oublié ma clé usb 
) je n'ai pas pu joindre un copier-coller donc je vais tenter de faire ça rapidement quand même. sinon as tu vraiment besoin de tout ça pour ma réponse sachant que ça fait vraiment un gros bloc de texte a coller. Sinon pour la commande dmesg j'ai bien noté la presence de port serie reconnu sur /dev/ttys0 et ttys1
Lors d'un premier essai j'avais d'ailleur essayé dans cups de déclarer l'imprimante comme epson://dev/ttys0 (basé sur l'imprimante port imprimante de même gamme)
pour info les imprimantes sont des imprimantes ticket (de caisse) de modèlle
tm-u220a pour la port imprimante et
tm-u220b pour la port série.
même sur le site d'epson je n'ai rien trouvé concernant les imprimantes "thermique" donc encore moin sur ces modèle précis.
Elle sont assez ancienne et je n'ai pas trouvé non plus d'archive de pilote.
Voila je te tiens au courrant des que j'ai les logs a poster.
Merci
Freddy
Le Cheval de Troyes est un animal qui passe son temps a piéger les système corrompu. Il contient en son cœur de nombreux système libre qu'il relâche la journée venu dans la ville de Troyes
www.auchevaldetroyes.fr
Hors ligne
#8 Le 01/04/2008, à 15:37
- Pacifick_FR42
Re : Imprimantes port série
Ok, ta à essayer de brancher cette imptimante directement sur ton port série d'origine ?
Hors ligne
#9 Le 01/04/2008, à 15:40
- Seedfrid
Re : Imprimantes port série
euh y'as pas de série d'origine. y'as que un ltp.
c'est pourquoi j'ai ajouté une carte pci.
j'ai récup le disque dur je dois aller le mettre dans une tour vite fais pour récup les log.
Le Cheval de Troyes est un animal qui passe son temps a piéger les système corrompu. Il contient en son cœur de nombreux système libre qu'il relâche la journée venu dans la ville de Troyes
www.auchevaldetroyes.fr
Hors ligne
#10 Le 29/04/2008, à 17:00
- Seedfrid
Re : Imprimantes port série
Et bien me voici avec un peu de retard mais me voici tout de même
je suis connecté au net avec mon imprimante connecté sur port com et toujours pas de resultat.
Voici le resultat des commandes que tu m'as demandé pour ce qui est du port serie.
[b]dmesg[/b]
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037fb0000 (usable)
[ 0.000000] BIOS-e820: 0000000037fb0000 - 0000000037fc0000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000037fc0000 - 0000000037ff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000037ff0000 - 0000000038000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 895MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 229296) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229296
[ 0.000000] HighMem 229296 -> 229296
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 229296
[ 0.000000] On node 0 totalpages: 229296
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1759 pages used for memmap
[ 0.000000] Normal zone: 223441 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FA870 checksum 0
[ 0.000000] ACPI: RSDP 000FA870, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 37FB0000, 0038 (r1 A_M_I OEMRSDT 6000712 MSFT 97)
[ 0.000000] ACPI: FACP 37FB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT 97)
[ 0.000000] ACPI: DSDT 37FB0440, 4C5F (r1 ALV6V ALV6V151 151 INTL 20051117)
[ 0.000000] ACPI: FACS 37FC0000, 0040
[ 0.000000] ACPI: APIC 37FB0390, 0070 (r1 A_M_I OEMAPIC 6000712 MSFT 97)
[ 0.000000] ACPI: MCFG 37FB0400, 003C (r1 A_M_I OEMMCFG 6000712 MSFT 97)
[ 0.000000] ACPI: OEMB 37FC0040, 0060 (r1 A_M_I AMI_OEM 6000712 MSFT 97)
[ 0.000000] ACPI: SSDT 37FB50A0, 00F4 (r1 A M I POWERNOW 1 AMD 1)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 38000000:c6c00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227505
[ 0.000000] Kernel command line: root=UUID=4a04557c-f95a-47e7-9e09-f113b4f4d460 ro quiet splash locale=fr_FR
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1908.560 MHz processor.
[ 20.604229] spurious 8259A interrupt: IRQ7.
[ 20.608006] Console: colour VGA+ 80x25
[ 20.608010] console [tty0] enabled
[ 20.608427] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 20.609183] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 20.625945] Memory: 897188k/917184k available (2157k kernel code, 19356k reserved, 998k data, 364k init, 0k highmem)
[ 20.625952] virtual kernel memory layout:
[ 20.625953] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 20.625955] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 20.625956] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 20.625957] lowmem : 0xc0000000 - 0xf7fb0000 ( 895 MB)
[ 20.625958] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 20.625959] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 20.625960] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 20.625963] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 20.625999] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 20.705950] Calibrating delay using timer specific routine.. 3821.22 BogoMIPS (lpj=7642458)
[ 20.705973] Security Framework initialized
[ 20.705979] SELinux: Disabled at boot.
[ 20.705993] AppArmor: AppArmor initialized
[ 20.705997] Failure registering capabilities with primary security module.
[ 20.706006] Mount-cache hash table entries: 512
[ 20.706115] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 00000119 00000000
[ 20.706124] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 20.706126] CPU: L2 Cache: 256K (64 bytes/line)
[ 20.706129] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 00000119 00000000
[ 20.706138] Compat vDSO mapped to ffffe000.
[ 20.706148] Checking 'hlt' instruction... OK.
[ 20.722211] SMP alternatives: switching to UP code
[ 20.723340] Freeing SMP alternatives: 11k freed
[ 20.723461] Early unpacking initramfs... done
[ 21.037197] ACPI: Core revision 20070126
[ 21.037267] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 21.039654] CPU0: AMD Sempron(tm) Processor LE-1100 stepping 01
[ 21.039676] Total of 1 processors activated (3821.22 BogoMIPS).
[ 21.039916] ENABLING IO-APIC IRQs
[ 21.040158] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 21.185555] Brought up 1 CPUs
[ 21.185603] CPU0 attaching sched-domain:
[ 21.185606] domain 0: span 01
[ 21.185607] groups: 01
[ 21.185787] net_namespace: 64 bytes
[ 21.185794] Booting paravirtualized kernel on bare hardware
[ 21.186263] Time: 15:29:29 Date: 04/29/08
[ 21.186291] NET: Registered protocol family 16
[ 21.186470] EISA bus registered
[ 21.186504] ACPI: bus type pci registered
[ 21.187376] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 21.187378] PCI: Using configuration type 1
[ 21.187380] Setting up standard PCI resources
[ 21.196208] ACPI: EC: Look up EC in DSDT
[ 21.201568] ACPI: Interpreter enabled
[ 21.201571] ACPI: (supports S0 S1 S3 S4 S5)
[ 21.201585] ACPI: Using IOAPIC for interrupt routing
[ 21.201833] Error attaching device data
[ 21.201838] Error attaching device data
[ 21.210535] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 21.211165] PCI: Transparent bridge - 0000:00:04.0
[ 21.211346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 21.211541] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 21.211653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 21.211744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 21.219255] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 21.219458] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 21.219657] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[ 21.219855] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 21.220052] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 21.220253] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 21.220451] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 21.220649] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 21.220847] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 21.221044] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 21.221242] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[ 21.221445] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 21.221650] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 21.221849] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
[ 21.222046] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 21.222249] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 21.222447] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[ 21.222650] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
[ 21.222889] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 21.223013] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 29, should be 1C [20070126]
[ 21.223020] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 21.223048] pnp: PnP ACPI init
[ 21.223056] ACPI: bus type pnp registered
[ 21.228717] pnp: PnP ACPI: found 14 devices
[ 21.228720] ACPI: ACPI bus type pnp unregistered
[ 21.228724] PnPBIOS: Disabled by ACPI PNP
[ 21.228928] PCI: Using ACPI for IRQ routing
[ 21.228932] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 21.249463] NET: Registered protocol family 8
[ 21.249465] NET: Registered protocol family 20
[ 21.249533] AppArmor: AppArmor Filesystem Enabled
[ 21.253451] Time: tsc clocksource has been installed.
[ 21.261482] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 21.261485] system 00:07: ioport range 0x800-0x80f has been reserved
[ 21.261488] system 00:07: ioport range 0x4000-0x407f has been reserved
[ 21.261491] system 00:07: ioport range 0x4080-0x40ff has been reserved
[ 21.261493] system 00:07: ioport range 0x4400-0x447f has been reserved
[ 21.261496] system 00:07: ioport range 0x4480-0x44ff has been reserved
[ 21.261499] system 00:07: ioport range 0x4800-0x487f has been reserved
[ 21.261501] system 00:07: ioport range 0x4880-0x48ff has been reserved
[ 21.261504] system 00:07: ioport range 0x2000-0x207f has been reserved
[ 21.261507] system 00:07: ioport range 0x2080-0x20ff has been reserved
[ 21.261510] system 00:07: iomem range 0x0-0x0 could not be reserved
[ 21.261513] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 21.261516] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
[ 21.261518] system 00:07: iomem range 0xfee01000-0xfeefffff could not be reserved
[ 21.261525] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 21.261528] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 21.261535] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 21.261541] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 21.261548] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 21.261550] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 21.261553] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 21.261556] system 00:0d: iomem range 0x100000-0x3fffffff could not be reserved
[ 21.261559] system 00:0d: iomem range 0xff380000-0xffffffff could not be reserved
[ 21.291898] PCI: Bridge: 0000:00:04.0
[ 21.291901] IO window: e000-efff
[ 21.291904] MEM window: disabled.
[ 21.291907] PREFETCH window: disabled.
[ 21.291910] PCI: Bridge: 0000:00:09.0
[ 21.291911] IO window: disabled.
[ 21.291913] MEM window: disabled.
[ 21.291915] PREFETCH window: disabled.
[ 21.291918] PCI: Bridge: 0000:00:0b.0
[ 21.291919] IO window: disabled.
[ 21.291921] MEM window: disabled.
[ 21.291923] PREFETCH window: disabled.
[ 21.291925] PCI: Bridge: 0000:00:0c.0
[ 21.291927] IO window: disabled.
[ 21.291929] MEM window: disabled.
[ 21.291931] PREFETCH window: disabled.
[ 21.291941] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 21.291953] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 21.291960] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 21.291967] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 21.291978] NET: Registered protocol family 2
[ 21.329454] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 21.329741] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 21.330760] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 21.331276] TCP: Hash tables configured (established 131072 bind 65536)
[ 21.331280] TCP reno registered
[ 21.341513] checking if image is initramfs... it is
[ 21.792950] Switched to high resolution mode on CPU 0
[ 21.954203] Freeing initrd memory: 7283k freed
[ 21.954781] audit: initializing netlink socket (disabled)
[ 21.954800] audit(1209482969.228:1): initialized
[ 21.956506] VFS: Disk quotas dquot_6.5.1
[ 21.956572] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 21.956702] io scheduler noop registered
[ 21.956704] io scheduler anticipatory registered
[ 21.956706] io scheduler deadline registered
[ 21.956730] io scheduler cfq registered (default)
[ 22.484184] Boot video device is 0000:00:0d.0
[ 22.484292] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 22.484314] assign_interrupt_mode Found MSI capability
[ 22.484334] Allocate Port Service[0000:00:09.0:pcie00]
[ 22.484395] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 22.484416] assign_interrupt_mode Found MSI capability
[ 22.484431] Allocate Port Service[0000:00:0b.0:pcie00]
[ 22.484485] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 22.484505] assign_interrupt_mode Found MSI capability
[ 22.484520] Allocate Port Service[0000:00:0c.0:pcie00]
[ 22.484709] isapnp: Scanning for PnP cards...
[ 22.837424] isapnp: No Plug & Play device found
[ 22.868370] Real Time Clock Driver v1.12ac
[ 22.868470] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 22.868586] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.869253] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.869734] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 22.869744] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKC] -> GSI 19 (level, low) -> IRQ 16
[ 22.869984] 0000:01:0a.0: ttyS1 at I/O 0xec00 (irq = 16) is a 16550A
[ 22.870257] 0000:01:0a.0: ttyS2 at I/O 0xe880 (irq = 16) is a 16550A
[ 22.870965] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 22.871029] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 22.871119] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 22.871122] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 22.871550] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.875984] mice: PS/2 mouse device common for all mice
[ 22.876102] EISA: Probing bus 0 at eisa.0
[ 22.876111] Cannot allocate resource for EISA slot 2
[ 22.876115] Cannot allocate resource for EISA slot 4
[ 22.876117] Cannot allocate resource for EISA slot 5
[ 22.876119] Cannot allocate resource for EISA slot 6
[ 22.876126] EISA: Detected 0 cards.
[ 22.876129] cpuidle: using governor ladder
[ 22.876130] cpuidle: using governor menu
[ 22.876220] NET: Registered protocol family 1
[ 22.876249] Using IPI No-Shortcut mode
[ 22.876292] registered taskstats version 1
[ 22.876409] Magic number: 4:683:488
[ 22.876579] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 22.876581] EDD information not available.
[ 22.876836] Freeing unused kernel memory: 364k freed
[ 22.907739] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 24.183138] fuse init (API version 7.9)
[ 24.209162] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 25.005656] usbcore: registered new interface driver usbfs
[ 25.005684] usbcore: registered new interface driver hub
[ 25.021623] usbcore: registered new device driver usb
[ 25.040774] SCSI subsystem initialized
[ 25.047325] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 25.047717] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 25.047728] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 17
[ 25.047743] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 25.047747] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 25.048058] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 25.048078] ohci_hcd 0000:00:02.0: irq 17, io mem 0xdffff000
[ 25.101370] libata version 3.00 loaded.
[ 25.103607] usb usb1: configuration #1 chosen from 1 choice
[ 25.103636] hub 1-0:1.0: USB hub found
[ 25.103644] hub 1-0:1.0: 10 ports detected
[ 25.205935] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 25.205948] ACPI: PCI Interrupt 0000:00:02.1 -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 18
[ 25.205961] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 25.205965] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 25.205997] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 25.206028] ehci_hcd 0000:00:02.1: debug port 1
[ 25.206032] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 25.206043] ehci_hcd 0000:00:02.1: irq 18, io mem 0xdfffec00
[ 25.217341] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 25.217490] usb usb2: configuration #1 chosen from 1 choice
[ 25.217518] hub 2-0:1.0: USB hub found
[ 25.217526] hub 2-0:1.0: 10 ports detected
[ 25.309298] Floppy drive(s): fd0 is 1.44M
[ 25.321455] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 25.321801] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 25.321812] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 19
[ 25.321818] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 25.331534] FDC 0 is a post-1991 82077
[ 25.841180] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:19:66:3c:b5:d6
[ 25.841186] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi desc-v3
[ 25.841355] sata_nv 0000:00:08.0: version 3.5
[ 25.841705] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 25.841716] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 25.841763] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 25.844193] scsi0 : sata_nv
[ 25.845492] scsi1 : sata_nv
[ 25.845836] ata1: SATA max UDMA/133 cmd 0xe00 ctl 0xe20 bmdma 0xc880 irq 20
[ 25.845839] ata2: SATA max UDMA/133 cmd 0xe40 ctl 0xe60 bmdma 0xc888 irq 20
[ 26.156351] ata1: SATA link down (SStatus 0 SControl 300)
[ 26.220294] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 26.430234] usb 1-1: configuration #1 chosen from 1 choice
[ 26.631842] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 26.640099] ata2.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133
[ 26.640102] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 26.656073] ata2.00: configured for UDMA/133
[ 26.656210] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[ 26.656623] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 26.656627] ACPI: PCI Interrupt 0000:00:08.1[b] -> Link [LSA1] -> GSI 23 (level, low) -> IRQ 17
[ 26.656673] PCI: Setting latency timer of device 0000:00:08.1 to 64
[ 26.657109] scsi2 : sata_nv
[ 26.657297] scsi3 : sata_nv
[ 26.657523] ata3: SATA max UDMA/133 cmd 0xe80 ctl 0xea0 bmdma 0xc000 irq 17
[ 26.657526] ata4: SATA max UDMA/133 cmd 0xec0 ctl 0xee0 bmdma 0xc008 irq 17
[ 26.735721] usb 1-4: new full speed USB device using ohci_hcd and address 3
[ 26.959709] usb 1-4: configuration #1 chosen from 1 choice
[ 26.963026] usbcore: registered new interface driver hiddev
[ 26.967499] ata3: SATA link down (SStatus 0 SControl 300)
[ 26.978799] input: HID 1241:1166 as /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/input/input2
[ 26.991533] input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:02.0-1
[ 26.991559] usbcore: registered new interface driver usbhid
[ 26.991564] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 27.035027] usbcore: registered new interface driver libusual
[ 27.047476] Initializing USB Mass Storage driver...
[ 27.049059] scsi4 : SCSI emulation for USB Mass Storage devices
[ 27.053727] usbcore: registered new interface driver usb-storage
[ 27.053734] USB Mass Storage support registered.
[ 27.053852] usb-storage: device found at 3
[ 27.053854] usb-storage: waiting for device to settle before scanning
[ 27.287144] ata4: SATA link down (SStatus 0 SControl 300)
[ 27.299086] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 27.304886] pata_amd 0000:00:06.0: version 0.3.10
[ 27.304939] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 27.311205] scsi5 : pata_amd
[ 27.315844] scsi6 : pata_amd
[ 27.316768] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 27.316772] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 27.635141] ata5.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.04, max UDMA/66
[ 27.806908] ata5.00: configured for UDMA/66
[ 27.806950] ata6: port disabled. ignoring.
[ 27.808292] scsi 5:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.04 PQ: 0 ANSI: 5
[ 27.821318] Driver 'sd' needs updating - please use bus_type methods
[ 27.821419] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 27.821432] sd 1:0:0:0: [sda] Write Protect is off
[ 27.821435] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 27.821453] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.821506] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 27.821516] sd 1:0:0:0: [sda] Write Protect is off
[ 27.821518] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 27.821534] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.821538] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 27.844442] sda1 sda2 sda3
[ 27.853169] sd 1:0:0:0: [sda] Attached SCSI disk
[ 27.861043] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 27.861074] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 27.864515] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 27.864523] Uniform CD-ROM driver Revision: 3.20
[ 27.864589] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 28.266541] Attempting manual resume
[ 28.266545] swsusp: Resume From Partition 8:1
[ 28.266547] PM: Checking swsusp image.
[ 28.266725] PM: Resume from disk failed.
[ 28.306194] kjournald starting. Commit interval 5 seconds
[ 28.306212] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.047553] usb-storage: device scan complete
[ 32.054527] scsi 4:0:0:0: Direct-Access HP 1.00 PQ: 0 ANSI: 2
[ 32.065547] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 32.065579] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 36.045289] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 36.045337] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
[ 36.407650] input: Power Button (FF) as /devices/virtual/input/input3
[ 36.425585] ACPI: Power Button (FF) [PWRF]
[ 36.425752] input: Power Button (CM) as /devices/virtual/input/input4
[ 36.437577] ACPI: Power Button (CM) [PWRB]
[ 38.191896] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3B11
[ 38.191918] usbcore: registered new interface driver usblp
[ 38.739356] parport_pc 00:06: reported by Plug and Play ACPI
[ 38.739411] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 39.161896] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 39.206843] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 39.263485] Linux agpgart interface v0.102
[ 39.677059] nvidia: module license 'NVIDIA' taints kernel.
[ 40.145861] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 40.446609] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 40.446615] ACPI: PCI Interrupt 0000:00:05.0[b] -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 18
[ 40.446641] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 40.480102] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 40.649713] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 21
[ 40.649719] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LMC9] -> GSI 21 (level, low) -> IRQ 19
[ 40.649727] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 40.650023] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 43.148265] lp0: using parport0 (interrupt-driven).
[ 43.232864] Adding 979924k swap on /dev/sda1. Priority:-1 extents:1 across:979924k
[ 43.801611] EXT3 FS on sda2, internal journal
[ 44.617775] kjournald starting. Commit interval 5 seconds
[ 44.617997] EXT3 FS on sda3, internal journal
[ 44.618003] EXT3-fs: mounted filesystem with ordered data mode.
[ 45.244070] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 45.833198] No dock devices found.
[ 46.293410] powernow-k8: Found 1 AMD Sempron(tm) Processor LE-1100 processors (1 cpu cores) (version 2.20.00)
[ 46.293450] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0xa
[ 46.293452] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xb
[ 46.293455] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 49.218983] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[ 49.218989] apm: overridden by ACPI.
[ 49.430336] ppdev: user-space parallel port driver
[ 49.580468] audit(1209482997.560:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5119 profile="/usr/sbin/cupsd" namespace="default"
[ 95.275293] Marking TSC unstable due to: cpufreq changes.
[ 95.282674] Time: acpi_pm clocksource has been installed.
[ 95.422633] Clocksource tsc unstable (delta = -69880584 ns)
[ 98.008237] Bluetooth: Core ver 2.11
[ 98.029906] NET: Registered protocol family 31
[ 98.029915] Bluetooth: HCI device and connection manager initialized
[ 98.029924] Bluetooth: HCI socket layer initialized
[ 98.117416] Bluetooth: L2CAP ver 2.9
[ 98.117427] Bluetooth: L2CAP socket layer initialized
[ 98.185611] Bluetooth: RFCOMM socket layer initialized
[ 98.185641] Bluetooth: RFCOMM TTY layer initialized
[ 98.185645] Bluetooth: RFCOMM ver 1.8
[ 100.227769] NET: Registered protocol family 17
[ 102.283904] NET: Registered protocol family 10
[ 102.285292] lo: Disabled Privacy Extensions
[ 116.667663] eth0: no IPv6 routers present
[ 124.869988] ppdev0: registered pardevice
[ 124.930292] ppdev0: unregistered pardevice
[ 124.997610] ppdev0: registered pardevice
[ 125.045553] ppdev0: unregistered pardevice
[ 125.062583] ppdev0: registered pardevice
[ 125.109756] ppdev0: unregistered pardevice
[b]lsmod[/b]
Module Size Used by
ipv6 267780 15
af_packet 23812 2
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
ppdev 10372 0
powernow_k8 16704 0
cpufreq_ondemand 9740 1
cpufreq_conservative 8712 0
cpufreq_powersave 2688 0
cpufreq_userspace 5284 0
cpufreq_stats 7104 0
freq_table 5536 3 powernow_k8,cpufreq_ondemand,cpufreq_stats
sbs 15112 0
sbshc 7680 1 sbs
video 19856 0
output 4736 1 video
container 5632 0
dock 11280 0
battery 14212 0
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
ac 6916 0
lp 12324 0
snd_hda_intel 344728 3
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
snd_pcm 78596 2 snd_hda_intel,snd_pcm_oss
snd_page_alloc 11400 2 snd_hda_intel,snd_pcm
snd_hwdep 10500 1 snd_hda_intel
pcspkr 4224 0
k8temp 6656 0
nvidia 7825536 34
agpgart 34760 1 nvidia
shpchp 34452 0
pci_hotplug 30880 1 shpchp
snd_seq_dummy 4868 0
parport_serial 8192 0
parport_pc 36260 2 parport_serial
parport 37832 3 ppdev,lp,parport_pc
snd_seq_oss 35584 0
snd_seq_midi 9376 0
evdev 13056 3
snd_rawmidi 25760 1 snd_seq_midi
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24836 2 snd_pcm,snd_seq
snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 56996 17 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 8800 1 snd
usblp 15872 0
button 9232 0
i2c_nforce2 7680 0
i2c_core 24832 2 nvidia,i2c_nforce2
ext3 136712 2
jbd 48404 1 ext3
mbcache 9600 1 ext3
sg 36880 0
sr_mod 17956 0
cdrom 37408 1 sr_mod
sd_mod 30720 4
ata_generic 8324 0
pata_amd 14212 0
usb_storage 73664 0
libusual 19108 1 usb_storage
usbhid 31872 0
hid 38784 1 usbhid
floppy 59588 0
pata_acpi 8320 0
sata_nv 27528 3
forcedeth 51980 0
libata 159344 4 ata_generic,pata_amd,pata_acpi,sata_nv
ehci_hcd 37900 0
ohci_hcd 25348 0
scsi_mod 151436 5 sg,sr_mod,sd_mod,usb_storage,libata
usbcore 146028 7 usblp,usb_storage,libusual,usbhid,ehci_hcd,ohci_hcd
thermal 16796 0
processor 36872 2 powernow_k8,thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50580 3
et [b]lspci [/b]
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6100 nForce 430 (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:0a.0 Serial controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01)J'espère qu'une reponse sera possible et si c'est le cas je promet de rédiger un tuto dans la doc wink
merci de ton aide et désolé pour le retard
Le Cheval de Troyes est un animal qui passe son temps a piéger les système corrompu. Il contient en son cœur de nombreux système libre qu'il relâche la journée venu dans la ville de Troyes
www.auchevaldetroyes.fr
Hors ligne
#11 Le 15/05/2008, à 22:06
- Seedfrid
Re : Imprimantes port série
Bonjour
Bon voila question application, plus aucun probleme.
et puis a dire vrai dans ce post j'ai un peu tout mélangé
alors je viens reposer ma question.
Quelqu'un sais-t-il comment on fais fonctionner une imprimante sur port série?
Je suis sous Gusty, les port série sont tout 2 affiché dans information sur le matériel dans la partie PCI.
L'imprimante fonctionne bien sous win98 donc elle n'est pas en panne.
Et mes commandes sont affiché au dessus.
J'ai essayé la solution epson:/dev/ttyS1 et S2
lorsque je tente de mettre le s2, il se remet automatiquement sur s1 quand je lance la détéction.
L'imprimante apparement est bien détécté mais aucune impression n'arrive, sur la file cela reste noté en en cours de traitement.
Le Cheval de Troyes est un animal qui passe son temps a piéger les système corrompu. Il contient en son cœur de nombreux système libre qu'il relâche la journée venu dans la ville de Troyes
www.auchevaldetroyes.fr
Hors ligne
Pages : 1