Pages : 1
#1 Le 23/03/2008, à 20:07
- soso
scanner lexmark x1100
Bonjour, je vien d'installé mon imprimante/scanner lexmark x1100 a partir des driver Z600, l'imprimante fonctione parfaitement mais le scanner n'est pas detecté.
Voila ce que donne lsusb:
Bus 005 Device 004: ID 046d:0892 Logitech, Inc.
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a Optical Wheel Mouse
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 006: ID 043d:007b Lexmark International, Inc.
Bus 001 Device 005: ID 043d:007c Lexmark International, Inc.
Bus 001 Device 004: ID 043d:007a Lexmark International, Inc.
Bus 001 Device 001: ID 0000:0000scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).sane-find-scanner
This is sane-find-scanner from sane-backends 1.0.19
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/sg0... failed to open (Invalid argument)
checking /dev/sg1... failed to open (Invalid argument)
checking /dev/sg2... failed to open (Invalid argument)
checking /dev/sg3... failed to open (Invalid argument)
checking /dev/sg4... failed to open (Invalid argument)
checking /dev/sg5... failed to open (Invalid argument)
checking /dev/sg6... failed to open (Invalid argument)
checking /dev/sg7... failed to open (Invalid argument)
checking /dev/sg8... failed to open (Invalid argument)
checking /dev/sg9... failed to open (Invalid argument)
checking /dev/sga... failed to open (Invalid argument)
checking /dev/sgb... failed to open (Invalid argument)
checking /dev/sgc... failed to open (Invalid argument)
checking /dev/sgd... failed to open (Invalid argument)
checking /dev/sge... failed to open (Invalid argument)
checking /dev/sgf... failed to open (Invalid argument)
checking /dev/sgg... failed to open (Invalid argument)
checking /dev/sgh... failed to open (Invalid argument)
checking /dev/sgi... failed to open (Invalid argument)
checking /dev/sgj... failed to open (Invalid argument)
checking /dev/sgk... failed to open (Invalid argument)
checking /dev/sgl... failed to open (Invalid argument)
checking /dev/sgm... failed to open (Invalid argument)
checking /dev/sgn... failed to open (Invalid argument)
checking /dev/sgo... failed to open (Invalid argument)
checking /dev/sgp... failed to open (Invalid argument)
checking /dev/sgq... failed to open (Invalid argument)
checking /dev/sgr... failed to open (Invalid argument)
checking /dev/sgs... failed to open (Invalid argument)
checking /dev/sgt... failed to open (Invalid argument)
checking /dev/sgu... failed to open (Invalid argument)
checking /dev/sgv... failed to open (Invalid argument)
checking /dev/sgw... failed to open (Invalid argument)
checking /dev/sgx... failed to open (Invalid argument)
checking /dev/sgy... failed to open (Invalid argument)
checking /dev/sgz... failed to open (Invalid argument)
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
checking /dev/usb/scanner0... failed to open (Invalid argument)
checking /dev/usb/scanner1... failed to open (Invalid argument)
checking /dev/usb/scanner2... failed to open (Invalid argument)
checking /dev/usb/scanner3... failed to open (Invalid argument)
checking /dev/usb/scanner4... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner7... failed to open (Invalid argument)
checking /dev/usb/scanner8... failed to open (Invalid argument)
checking /dev/usb/scanner9... failed to open (Invalid argument)
checking /dev/usb/scanner10... failed to open (Invalid argument)
checking /dev/usb/scanner11... failed to open (Invalid argument)
checking /dev/usb/scanner12... failed to open (Invalid argument)
checking /dev/usb/scanner13... failed to open (Invalid argument)
checking /dev/usb/scanner14... failed to open (Invalid argument)
checking /dev/usb/scanner15... failed to open (Invalid argument)
checking /dev/usbscanner... failed to open (Invalid argument)
checking /dev/usbscanner0... failed to open (Invalid argument)
checking /dev/usbscanner1... failed to open (Invalid argument)
checking /dev/usbscanner2... failed to open (Invalid argument)
checking /dev/usbscanner3... failed to open (Invalid argument)
checking /dev/usbscanner4... failed to open (Invalid argument)
checking /dev/usbscanner5... failed to open (Invalid argument)
checking /dev/usbscanner6... failed to open (Invalid argument)
checking /dev/usbscanner7... failed to open (Invalid argument)
checking /dev/usbscanner8... failed to open (Invalid argument)
checking /dev/usbscanner9... failed to open (Invalid argument)
checking /dev/usbscanner10... failed to open (Invalid argument)
checking /dev/usbscanner11... failed to open (Invalid argument)
checking /dev/usbscanner12... failed to open (Invalid argument)
checking /dev/usbscanner13... failed to open (Invalid argument)
checking /dev/usbscanner14... failed to open (Invalid argument)
checking /dev/usbscanner15... failed to open (Invalid argument)
trying libusb:
<device descriptor of 0x046d/0x0892 at 005:004 (OEM Camera)>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255
bDeviceSubClass 255
bDeviceProtocol 255
bMaxPacketSize0 64
idVendor 0x046D
idProduct 0x0892
bcdDevice 1.00
iManufacturer 1 (OEM)
iProduct 2 (Camera)
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 193
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 128 ()
MaxPower 200 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 7 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 1 (isochronous)
wMaxPacketSize 0
bInterval 1 ms
bRefresh 0
bSynchAddress 0
<altsetting 1>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 7 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 1 (isochronous)
wMaxPacketSize 128
bInterval 1 ms
bRefresh 0
bSynchAddress 0
<altsetting 2>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 255
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 7 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 1 (isochronous)
wMaxPacketSize 512
bInterval 1 ms
bRefresh 0
bSynchAddress 0
<altsetting 3>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 255
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 7 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 1 (isochronous)
wMaxPacketSize 1024
bInterval 1 ms
bRefresh 0
bSynchAddress 0
<altsetting 4>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 255
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 7 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 1 (isochronous)
wMaxPacketSize 2816
bInterval 1 ms
bRefresh 0
bSynchAddress 0
<altsetting 5>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 255
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 7 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 1 (isochronous)
wMaxPacketSize 3072
bInterval 1 ms
bRefresh 0
bSynchAddress 0
<altsetting 6>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 6
bNumEndpoints 2
bInterfaceClass 255
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 7 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 1 (isochronous)
wMaxPacketSize 4992
bInterval 1 ms
bRefresh 0
bSynchAddress 0
<altsetting 7>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 7
bNumEndpoints 2
bInterfaceClass 255
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 7 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 1 (isochronous)
wMaxPacketSize 5120
bInterval 1 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bcdUSB = 0x200)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GT-8911 ...
this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bcdUSB = 0x200)
checking for MA-1509 ...
this is not a MA-1509 (bcdUSB = 0x200)
checking for LM983[1,2,3] ...
this is not a LM983x (bcdUSB = 0x200)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GL646_HP ...
this is not a GL646_HP (bcdUSB = 0x200)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GL84x ...
this is not a GL841 (bNumEndpoints = 2)
checking for ICM532B ...
this is not a ICM532B (check 2, bcdUSB = 0x200)
checking for PV8630/LM9830 ...
this is not a PV8630/LM9830 (bDeviceClass = 255)
checking for M011 ...
this is not a M011 (bcdUSB = 0x200)
checking for RTS8822 ...
this is not a RTS8822 (bDeviceClass = 255)
checking for rts8858c ...
this is not a rts8858c (bDeviceClass = 255)
checking for SQ113 ...
this is not a SQ113 (bDeviceClass = 255)
checking for HP5550/5590/7650 chipset ...
this is not a HP5550/5590/7650 chipset (bNumEndpoints = 2)
checking for rts8801/rts8891 ...
this is not a rts8801/rts8891 (bDeviceClass = 255)
<Couldn't determine the type of the USB chip (result from sane-backends 1.0.19)>
found USB scanner (vendor=0x046d [OEM], product=0x0892 [Camera]) at libusb:005:004
<device descriptor of 0x0000/0x0000 at 005:001 (Linux 2.6.24-12-generic ehci_hcd EHCI Host Controller)>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 1
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.24-12-generic ehci_hcd)
iProduct 2 (EHCI Host Controller)
iSerialNumber 1 (0000:00:1d.7)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 4
bInterval 12 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x0000/0x0000 at 004:001 (Linux 2.6.24-12-generic uhci_hcd UHCI Host Controller)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.24-12-generic uhci_hcd)
iProduct 2 (UHCI Host Controller)
iSerialNumber 1 (0000:00:1d.3)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x0000/0x0000 at 003:001 (Linux 2.6.24-12-generic uhci_hcd UHCI Host Controller)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.24-12-generic uhci_hcd)
iProduct 2 (UHCI Host Controller)
iSerialNumber 1 (0000:00:1d.2)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x046d/0xc016 at 002:002 (Logitech Optical USB Mouse)>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046D
idProduct 0xC016
bcdDevice 3.40
iManufacturer 1 (Logitech)
iProduct 2 (Optical USB Mouse)
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 160 (Remote Wakeup)
MaxPower 100 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3
bInterfaceSubClass 1
bInterfaceProtocol 2
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 4
bInterval 10 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x0000/0x0000 at 002:001 (Linux 2.6.24-12-generic uhci_hcd UHCI Host Controller)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.24-12-generic uhci_hcd)
iProduct 2 (UHCI Host Controller)
iSerialNumber 1 (0000:00:1d.1)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x043d/0x007b at 001:006 (Lexmark Lexmark X1100 Series)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x043D
idProduct 0x007B
bcdDevice 1.00
iManufacturer 1 (Lexmark )
iProduct 2 (Lexmark X1100 Series)
iSerialNumber 3 (3178080)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 4 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7
bInterfaceSubClass 1
bInterfaceProtocol 2
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 (out 0x05)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 16
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x043d/0x007c at 001:005>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x043D
idProduct 0x007C
bcdDevice 1.00
iManufacturer 1 ((null))
iProduct 2 ((null))
iSerialNumber 7 ((null))
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 6 ((null))
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 9 ((null))
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 8
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 250 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bDeviceClass = 0)
checking for GT-6816 ...
this is not a GT-6816 (bNumEndpoints = 3)
checking for GT-8911 ...
this is not a GT-8911 (check 5, bNumEndpoints = 3)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bDeviceClass = 0)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceClass = 0)
checking for LM983[1,2,3] ...
this is not a LM983x (bEndpointAddress = 0x81, bmAttributes = 0x2, wMaxPacketSize = 0x40, bInterval = 0x0)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL646_HP ...
this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL84x ...
this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
checking for ICM532B ...
this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
checking for PV8630/LM9830 ...
this is not a PV8630/LM9830 (bcdUSB = 0x110)
checking for M011 ...
this is not a M011 (bDeviceClass = 0)
checking for RTS8822 ...
this is not a RTS8822 (bEndpointAddress = 0x81, bmAttributes = 0x2, wMaxPacketSize = 0x40, bInterval = 0x0)
checking for rts8858c ...
<This USB chip looks like a rts8858c (result from sane-backends 1.0.19)>
found USB scanner (vendor=0x043d, product=0x007c, chip=rts8858c) at libusb:001:005
<device descriptor of 0x043d/0x007a at 001:004 (Lexmark USB Hub)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x043D
idProduct 0x007A
bcdDevice 1.00
iManufacturer 1 (Lexmark)
iProduct 2 (USB Hub)
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 8 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 255 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x0000/0x0000 at 001:001 (Linux 2.6.24-12-generic uhci_hcd UHCI Host Controller)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.24-12-generic uhci_hcd)
iProduct 2 (UHCI Host Controller)
iSerialNumber 1 (0000:00:1d.0)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
doneHors ligne
#2 Le 24/03/2008, à 17:29
- soso
Re : scanner lexmark x1100
Personne? 
Hors ligne
Pages : 1