Problème partage with samba (Lubuntu/Windows)

Nova08 · Le 26/07/2013, à 15:32

Bonjour,
J'utilise Lubuntu 13.04 et je souhaite créer un partage de fichier en réseau local.
Je me suis dit que j'allais utiliser samba mais je n'arrive pas le faire fonctionner...
I need your help!!!

Nova08

Dernière modification par Nova08 (Le 29/07/2013, à 17:40)

toutafai · Le 26/07/2013, à 16:45

bonjour ,
comment a tu créer le partage ?
Entre quel os tu veux faire un partage ?

Donne aussi les retours de

cat /etc/samba/smb.conf
sudo ufw status
sudo iptables -L
sudo smbtree

Nova08 · Le 27/07/2013, à 19:05

Salut,
J'ai résolu le problème, il ne me suffisait que d'installer le paquet libpam-smbpass et maintenant tout fonctionne!!
À la base, j'ai deux postes sous Lubuntu 13.04 et je voulais faire un partage entre eux, je créais le partage, mais quand je voulais accéder aux dossiers partagé (à partir du post qui ne partageait pas), il me mettait que je n'avais pas la permission et ensuite il me demandais un mot de passe...
Mais je vous dit, j'ai enfin réussi :DDD
Désolé du dérangement
et merci quand-même pour l'aide!!

PS: Vous voulez quand même que je donne les retours des commandes que vous m'avez demandés? (si oui je tape la commande dans un terminal et je vous envoie ce qu'il me retourne?)(dsl je suis (un peu) débutant dans lubuntu... xD)

toutafai · Le 27/07/2013, à 19:41

non, inutile de chercher si tu as réglé le problème. bonne continuation

Nova08 · Le 27/07/2013, à 21:45

Merci, vous de même!!

Nova08 · Le 29/07/2013, à 15:55

Salut,
Rectification: j'arrive à partager sans problème les fichiers que je veux pour Lubuntu mais pour Windows, j'arrive à partager le dossier home mais pas mon disque dur externe, pourtant, ma configuration de samba actuelle devrait me le permettre. Quand je double clique (à partir de l'ordinateur sous Windows) sur l'emplacement de mon Disque dur externe, il m'affiche:

Windows ne peut accéder à \\NOVA08-DELL\Disque JR

Vous n'avez pas l'autorisation d'accéder à \\NOVA08-DELL\Disque JR. Contactez l'
administrateur réseau pour demander l'accès.

Je précise que pour l'utilisateur samba d'origine, ça fonctionne aussi bien sur windows que sur Lubuntu, et que le deuxième utilisateur que j'ai nommé "kwik" ne fonctionne que sur Lubuntu (pour le Disque dur).
Pouvez-vous m'aider?

Nova08

Dernière modification par Nova08 (Le 29/07/2013, à 16:09)

Nova08 · Le 29/07/2013, à 17:19

toutafai a écrit :

Donne aussi les retours de

cat /etc/samba/smb.conf
sudo ufw status
sudo iptables -L
sudo smbtree

nova08@nova08-dell:~$ cat /etc/samba/smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
	workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
	server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
	dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
	log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
	max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
	syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
	panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
	encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
;	passdb backend = tdbsam

	obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
	unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
	passwd program = /usr/bin/passwd %u
	passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
	pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
	map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;	printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;	usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
	usershare allow guests = yes
	username map = /etc/samba/smbusers

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each 
# user's home director as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
	comment = All Printers
	browseable = no
	path = /var/spool/samba
	printable = yes
;	guest ok = no
;	read only = yes
	create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers

[Disque JR]
	comment = Disque Dur JR
	path = /media/nova08/Disque JR
	writeable = yes
	browseable = no
	valid users = kwik, nova08

[nova08]
	comment = Nova08
	path = /home/nova08
	writeable = yes
	browseable = no
	valid users = kwik, nova08

nova08@nova08-dell:~$

nova08@nova08-dell:~$ sudo ufw status
[sudo] password for nova08: 
Status: inactive
nova08@nova08-dell:~$

nova08@nova08-dell:~$ sudo iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         
nova08@nova08-dell:~$

nova08@nova08-dell:~$ sudo smbtree
sudo: smbtree: command not found
nova08@nova08-dell:~$

Nova08

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 26/07/2013, à 15:32

Problème partage with samba (Lubuntu/Windows)

#2 Le 26/07/2013, à 16:45

Re : Problème partage with samba (Lubuntu/Windows)

#3 Le 27/07/2013, à 19:05

Re : Problème partage with samba (Lubuntu/Windows)

#4 Le 27/07/2013, à 19:41

Re : Problème partage with samba (Lubuntu/Windows)

#5 Le 27/07/2013, à 21:45

Re : Problème partage with samba (Lubuntu/Windows)

#6 Le 29/07/2013, à 15:55

Re : Problème partage with samba (Lubuntu/Windows)

#7 Le 29/07/2013, à 17:19

Re : Problème partage with samba (Lubuntu/Windows)

Pied de page des forums