#251 Le 28/05/2013, à 21:49
- ragamatrix
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
Je crois que j'ai un problème idiot et je ne trouve pas la solution...
quand je lance un conky l'autre disparait...
Si quelqu'un veut bien m'expliquer d'où ça vient merci d'avance.
Conky:
##############################################
# Settings
##############################################
background yes
use_xft yes
xftfont font Droid Sans Mono:size=7
xftalpha 1
update_interval 1.0
total_run_times 0
own_window yes
own_window_transparent yes
#own_window_title ragamatrix horizonttle simple
own_window_type normal
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 1150 60
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
default_color 1f1f1f
color1 DCDCDC#Gris#1E90FF(bleu)00FF00(vert)
color2 666666
color3 00FF00
color4 gold
color5 burlywood2
color6 DeepPink2
color7 fff00d
default_shade_color 282828
alignment tm
gap_x -45
gap_y 5
no_buffers yes
uppercase no
cpu_avg_samples 2
override_utf8_locale yes
### LUA Settings ###########################################################
lua_load ~/.conky/conky32/draw_bg.lua
# Lua Load #
lua_load ~/.conky/conky32/doublerings.lua
lua_draw_hook_pre clock_rings
##############################################
# Output#color#lua#8DEEEE${voffset -100}
##############################################
TEXT
${lua conky_draw_bg 28 5 5 1150 60 0x333333 1}
${voffset 5}${goto 20}${font :size=7}${color1}${execi 1000 cat /proc/cpuinfo | grep 'model name' | sed -e 's/model name.*: //'| uniq}${goto 20}${voffset 20}${font style:bold:size=8}${color1}Crunchbang $kernel
${voffset -30}${goto 220}${font style:bold:size=7}${color1}HD:
${goto 220}${color 1E90FF}${fs_used_perc /home}%
${voffset -30}${goto 275}${font :size=6}${color green2}${top name 1}${top cpu 1}%
${goto 275}${font :size=6}${color lightgray}${top name 2}${top cpu 2}%
${goto 275}${font :size=6}${color lightgray}${top name 3}${top cpu 3}%
${goto 275}${font :size=6}${color lightgray}${top name 4}${top cpu 4}%
${voffset -36}${goto 400}${font :size=6}${color ffff00}${top_mem name 1}${top_mem mem 1}%
${goto 400}${font :size=6}${color lightgray}${top_mem name 2}${top_mem mem 2}%
${goto 400}${font :size=6}${color lightgray}${top_mem name 3}${top_mem mem 3}%
${goto 400}${font :size=6}${color lightgray}${top_mem name 4}${top_mem mem 4}%
${goto 520}${voffset -26}${font :size=6}${color1}cpu1:
${goto 520}${color green2}${cpu}%
${goto 588}${voffset -17}${font :size=6}${color1}mem:
${goto 590}${color ffff00}${memperc}%
${goto 658}${voffset -18}${font :size=7}${color1}cpu2:
${goto 660}${font :size=6}${color green2} ${cpu cpu2}%
${goto 750}${voffset -20}${font style:bold:size=7}${color ffff00}mem: $mem${color1} / $memmax ${goto 910}${font :size=6}${color ffff00}Processus Actifs: $running_processes Lancés: ${threads}
${goto 860}${voffset 10}${font style:bold:size=10}${color lightgray}dl|ul${goto 710}${font :size=6}${color 00FFFF}${downspeedf eth0}Kb${goto 1010}${font :size=6}${color FF8C00}${upspeedf eth0}Kb${goto 1510}${goto 750}${voffset -13}${downspeedgraph eth0 20,90 ffff00 00F5FF}${goto 910}${upspeedgraph eth0 20,90 FF4500 FFD700}
#${goto 700}${goto 1280}${memgraph 30,120 8B0A50 CD2626}
${voffset -260}
doublerings.lua:
-- 2011 changed by LaGaDesk
settings_table = {
{
-- Edit this table to customise your rings.
-- You can create more rings simply by adding more elements to settings_table.
-- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
name='time',
-- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
arg='%I.%M',
-- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
max=12,
-- "bg_colour" is the colour of the base ring.
bg_colour=0xFFFFFF,
-- "bg_alpha" is the alpha value of the base ring.
bg_alpha=0.1,
-- "fg_colour" is the colour of the indicator part of the ring.
fg_colour=0x6948FF,
-- "fg_alpha" is the alpha value of the indicator part of the ring.
fg_alpha=0.75,
-- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
x=1120, y=35,
-- "radius" is the radius of the ring.
radius=23,
-- "thickness" is the thickness of the ring, centred around the radius.
thickness=2,
-- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
start_angle=0,
-- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
end_angle=360
},
{
name='cpu',
arg='cpu1',
max=100,
bg_colour=0xFFFFFF,
bg_alpha=0.1,
fg_colour=0x00EE00,
fg_alpha=0.8,
x=530, y=35,
radius=20,
thickness=2,
start_angle=0,
end_angle=360
},
{
name='cpu',
arg='cpu2',
max=100,
bg_colour=0xFFFFFF,
bg_alpha=0.1,
fg_colour=0x00EE00,
fg_alpha=0.8,
x=670, y=35,
radius=20,
thickness=2,
start_angle=0,
end_angle=360
},
{
name='memperc',
arg='',
max=100,
bg_colour=0xFFFFFF,
bg_alpha=0.1,
fg_colour=0xFFFF00,
fg_alpha=0.8,
x=600, y=35,
radius=20,
thickness=2,
start_angle=0,
end_angle=360
},
{
name='fs_used_perc',
arg='/',
max=100,
bg_colour=0xFFFFFF,
bg_alpha=0.1,
fg_colour=0x1E90FF,
fg_alpha=0.8,
x=230, y=35,
radius=23,
thickness=2,
start_angle=0,
end_angle=360
},
{
name='fs_used_perc',
arg='/home',
max=100,
bg_colour=0xFFFFFF,
bg_alpha=0.1,
fg_colour=0x1E90FF,
fg_alpha=0.8,
x=230, y=35,
radius=18,
thickness=2,
start_angle=0,
end_angle=360
},
}
-- Use these settings to define the origin and extent of your clock.
clock_r=20
-- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.
clock_x=1120
clock_y=35
show_seconds=true
require 'cairo'
--------------------------------------------------------------------------------------------------------------------------
-- rgb_to_r_g_b
-- converts color in hexa to decimal
--
function rgb_to_r_g_b(colour, alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end
--------------------------------------------------------------------------------------------------------------------------
function draw_ring(cr,t,pt)
local w,h=conky_window.width,conky_window.height
local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']
local angle_0=sa*(2*math.pi/360)-math.pi/2
local angle_f=ea*(2*math.pi/360)-math.pi/2
local t_arc=t*(angle_f-angle_0)
-- Draw background ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
cairo_set_line_width(cr,ring_w)
cairo_stroke(cr)
-- Draw indicator ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
cairo_stroke(cr)
end
function draw_clock_hands(cr,xc,yc)
local secs,mins,hours,secs_arc,mins_arc,hours_arc
local xh,yh,xm,ym,xs,ys
secs=os.date("%S")
mins=os.date("%M")
hours=os.date("%I")
secs_arc=(2*math.pi/60)*secs
mins_arc=(2*math.pi/60)*mins+secs_arc/60
hours_arc=(2*math.pi/12)*hours+mins_arc/12
-- Draw hour hand
xh=xc+0.7*clock_r*math.sin(hours_arc)
yh=yc-0.7*clock_r*math.cos(hours_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xh,yh)
cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
cairo_set_line_width(cr,5)
cairo_set_source_rgba(cr,0.9,0.9,0.9,0.9)
cairo_stroke(cr)
-- Draw minute hand
xm=xc+clock_r*math.sin(mins_arc)
ym=yc-clock_r*math.cos(mins_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xm,ym)
cairo_set_line_width(cr,3)
cairo_stroke(cr)
-- Draw seconds hand
if show_seconds then
xs=xc+clock_r*math.sin(secs_arc)
ys=yc-clock_r*math.cos(secs_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xs,ys)
cairo_set_line_width(cr,1)
cairo_set_source_rgba(cr,0.9,0.2,0.1,0.8)
cairo_stroke(cr)
end
end
function conky_clock_rings()
local function setup_rings(cr,pt)
local str=''
local value=0
str=string.format('${%s %s}',pt['name'],pt['arg'])
str=conky_parse(str)
value=tonumber(str)
pct=value/pt['max']
draw_ring(cr,pct,pt)
end
-- Check that Conky has been running for at least 5s
if conky_window==nil then return end
local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
local cr=cairo_create(cs)
local updates=conky_parse('${updates}')
update_num=tonumber(updates)
if update_num>5 then
for i in pairs(settings_table) do
setup_rings(cr,settings_table[i])
end
end
draw_clock_hands(cr,clock_x,clock_y)
end draw_bg.lua:
--[[Background originally by londonali1010 (2009)
ability to set any size for background mrpeachy 2011
ability to set variables for bg in conkyrc dk75
the change is that if you set width and/or height to 0
then it assumes the width and/or height of the conky window
so:
lua_load ~/Conky/LUA/draw_bg.lua
TEXT
${lua conky_draw_bg 20 0 0 0 0 0x000000 0.4}
${lua conky_draw_bg corner_radius x_position y_position width height color alpha}
covers the whole window and will change if you change the minimum_size setting
20 corner_radius
0 x_position
0 y_position
0 width
0 height
0x000000 color
0.4 alpha
]]
require 'cairo'
local cs, cr = nil
function rgb_to_r_g_b(colour,alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end
function conky_draw_bg(r,x,y,w,h,color,alpha)
if conky_window == nil then return end
if cs == nil then cairo_surface_destroy(cs) end
if cr == nil then cairo_destroy(cr) end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
local cr = cairo_create(cs)
w=w
h=h
if w=="0" then w=tonumber(conky_window.width) end
if h=="0" then h=tonumber(conky_window.height) end
cairo_set_source_rgba (cr,rgb_to_r_g_b(color,alpha))
--top left mid circle
local xtl=x+r
local ytl=y+r
--top right mid circle
local xtr=(x+r)+((w)-(2*r))
local ytr=y+r
--bottom right mid circle
local xbr=(x+r)+((w)-(2*r))
local ybr=(y+r)+((h)-(2*r))
--bottom right mid circle
local xbl=(x+r)
local ybl=(y+r)+((h)-(2*r))
-----------------------------
cairo_move_to (cr,xtl,ytl-r)
cairo_line_to (cr,xtr,ytr-r)
cairo_arc(cr,xtr,ytr,r,((2*math.pi/4)*3),((2*math.pi/4)*4))
cairo_line_to (cr,xbr+r,ybr)
cairo_arc(cr,xbr,ybr,r,((2*math.pi/4)*4),((2*math.pi/4)*1))
cairo_line_to (cr,xbl,ybl+r)
cairo_arc(cr,xbl,ybl,r,((2*math.pi/4)*1),((2*math.pi/4)*2))
cairo_line_to (cr,xtl-r,ytl)
cairo_arc(cr,xtl,ytl,r,((2*math.pi/4)*2),((2*math.pi/4)*3))
cairo_close_path(cr)
cairo_fill (cr)
------------------------------------------------------------
cairo_surface_destroy(cs)
cairo_destroy(cr)
return ""
end image
Merci pour les yeux d'experts 
Dernière modification par ragamatrix (Le 28/05/2013, à 21:52)
Hors ligne
#252 Le 29/05/2013, à 05:41
- Didier-T
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
@ ragamatrix,
tu parle de deux conky, mais il n'y a le code que d'un ???
en tout cas bravo il est superbe, simple, clair et l'idée des redondances de couleur pour facilité la lecture est excellente.
en général, quand un conky en fait disparaitre un autre, c'est qu'il s'affiche au dessus.
Hors ligne
#253 Le 29/05/2013, à 08:38
- ragamatrix
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
Didier-T a écrit :
@ ragamatrix,
tu parle de deux conky, mais il n'y a le code que d'un ???
en tout cas bravo il est superbe, simple, clair et l'idée des redondances de couleur pour facilité la lecture est excellente.en général, quand un conky en fait disparaitre un autre, c'est qu'il s'affiche au dessus.
Merci pour ce retour.
En fait j'ai essayé d'en lancer différents et toujours celui-ci en premier; le problème reste le même et rien n'apparaît dans le terminal. (comme j'en lance des différents ils ne se superposent pas car ils n'ont pas le même placement...)
terminal après disparition du conky:
raphix@crunchbang:~$ conky -c ~/.conky/conky32/Conky_Bar_Sys_2
Conky: forked to background, pid is 3406
raphix@crunchbang:~$
Conky: desktop window (ae) is root window
Conky: window type - normal
Conky: drawing to created window (0x2e00001)
Conky: drawing to double buffer
Hors ligne
#254 Le 29/05/2013, à 10:06
- ragamatrix
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
Ce conky horizontal a une fuite de mémoire; je pense avoir trouvé la solution. (si dans quelques heures celui-ci reste stable... cette solution serait la bonne)
Dans le script doublerings.lua:
ligne 222 ajoutez après: local cr=cairo_create(cs)
ces deux lignes:
local extents=cairo_text_extents_t:create()
tolua.takeownership(extents) Dernière modification par ragamatrix (Le 29/05/2013, à 10:44)
Hors ligne
#255 Le 29/05/2013, à 10:57
- ragamatrix
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
Bin nan ! ça marche pas ! 
Hors ligne
#256 Le 29/05/2013, à 17:03
- 6-ril
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
Vaykadji a écrit :
Un conky basique :
Salut à tous !
J'ai utilisé le conky basic de Vaykadji, mais mon conky s'affiche sur fond noir, il n'est pas transparent.
Est-ce un bug ou une option à ajouter ?
D'autre part, comment peut-t-on choisir l'écran sur lequel l'afficher?
Merci
6ril
Ubuntu 13.04
Hors ligne
#257 Le 30/05/2013, à 06:20
- Didier-T
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
@ ragamatrix,
le script qui posait problème est corrigé.
doublerings.lua
-- 2011 changed by LaGaDesk
settings_table = {
{
-- Edit this table to customise your rings.
-- You can create more rings simply by adding more elements to settings_table.
-- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
name='time',
-- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
arg='%I.%M',
-- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
max=12,
-- "bg_colour" is the colour of the base ring.
bg_colour=0xFFFFFF,
-- "bg_alpha" is the alpha value of the base ring.
bg_alpha=0.1,
-- "fg_colour" is the colour of the indicator part of the ring.
fg_colour=0x6948FF,
-- "fg_alpha" is the alpha value of the indicator part of the ring.
fg_alpha=0.75,
-- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
x=1180, y=35,
-- "radius" is the radius of the ring.
radius=23,
-- "thickness" is the thickness of the ring, centred around the radius.
thickness=2,
-- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
start_angle=0,
-- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
end_angle=360
},
{
name='cpu',
arg='cpu1',
max=100,
bg_colour=0xFFFFFF,
bg_alpha=0.1,
fg_colour=0x00EE00,
fg_alpha=0.8,
x=590, y=35,
radius=20,
thickness=2,
start_angle=0,
end_angle=360
},
{
name='cpu',
arg='cpu2',
max=100,
bg_colour=0xFFFFFF,
bg_alpha=0.1,
fg_colour=0x00EE00,
fg_alpha=0.8,
x=660, y=35,
radius=20,
thickness=2,
start_angle=0,
end_angle=360
},
{
name='memperc',
arg='',
max=100,
bg_colour=0xFFFFFF,
bg_alpha=0.1,
fg_colour=0xFFFF00,
fg_alpha=0.8,
x=730, y=35,
radius=20,
thickness=2,
start_angle=0,
end_angle=360
},
{
name='fs_used_perc',
arg='/',
max=100,
bg_colour=0xFFFFFF,
bg_alpha=0.1,
fg_colour=0x1E90FF,
fg_alpha=0.8,
x=290, y=35,
radius=23,
thickness=2,
start_angle=0,
end_angle=360
},
{
name='fs_used_perc',
arg='/home',
max=100,
bg_colour=0xFFFFFF,
bg_alpha=0.1,
fg_colour=0x1E90FF,
fg_alpha=0.8,
x=290, y=35,
radius=18,
thickness=2,
start_angle=0,
end_angle=360
},
}
-- Use these settings to define the origin and extent of your clock.
clock_r=20
-- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.
clock_x=1180
clock_y=35
show_seconds=true
require 'cairo'
local cs, cr = nil
--------------------------------------------------------------------------------------------------------------------------
-- rgb_to_r_g_b
-- converts color in hexa to decimal
--
function rgb_to_r_g_b(colour, alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end
--------------------------------------------------------------------------------------------------------------------------
function draw_ring(cr,t,pt)
local w,h=conky_window.width,conky_window.height
local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']
local angle_0=sa*(2*math.pi/360)-math.pi/2
local angle_f=ea*(2*math.pi/360)-math.pi/2
local t_arc=t*(angle_f-angle_0)
-- Draw background ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
cairo_set_line_width(cr,ring_w)
cairo_stroke(cr)
-- Draw indicator ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
cairo_stroke(cr)
end
function draw_clock_hands(cr,xc,yc)
local secs,mins,hours,secs_arc,mins_arc,hours_arc
local xh,yh,xm,ym,xs,ys
secs=os.date("%S")
mins=os.date("%M")
hours=os.date("%I")
secs_arc=(2*math.pi/60)*secs
mins_arc=(2*math.pi/60)*mins+secs_arc/60
hours_arc=(2*math.pi/12)*hours+mins_arc/12
-- Draw hour hand
xh=xc+0.7*clock_r*math.sin(hours_arc)
yh=yc-0.7*clock_r*math.cos(hours_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xh,yh)
cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
cairo_set_line_width(cr,5)
cairo_set_source_rgba(cr,0.9,0.9,0.9,0.9)
cairo_stroke(cr)
-- Draw minute hand
xm=xc+clock_r*math.sin(mins_arc)
ym=yc-clock_r*math.cos(mins_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xm,ym)
cairo_set_line_width(cr,3)
cairo_stroke(cr)
-- Draw seconds hand
if show_seconds then
xs=xc+clock_r*math.sin(secs_arc)
ys=yc-clock_r*math.cos(secs_arc)
cairo_move_to(cr,xc,yc)
cairo_line_to(cr,xs,ys)
cairo_set_line_width(cr,1)
cairo_set_source_rgba(cr,0.9,0.2,0.1,0.8)
cairo_stroke(cr)
end
end
function conky_clock_rings()
local function setup_rings(cr,pt)
local str=''
local value=0
str=string.format('${%s %s}',pt['name'],pt['arg'])
str=conky_parse(str)
value=tonumber(str)
pct=value/pt['max']
draw_ring(cr,pct,pt)
end
-- Check that Conky has been running for at least 5s
if conky_window==nil then return end
local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
local cr=cairo_create(cs)
local updates=conky_parse('${updates}')
update_num=tonumber(updates)
if update_num>5 then
for i in pairs(settings_table) do
setup_rings(cr,settings_table[i])
end
end
draw_clock_hands(cr,clock_x,clock_y)
cairo_destroy(cr)
cairo_surface_destroy(cs)
cr=nil
collectgarbage()
end Hors ligne
#258 Le 30/05/2013, à 06:23
- Didier-T
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
@ 6-ril,
tu peut essayer avec ceci.
# temps pour fermer conky en seconde. 0 = toujours actif
total_run_times 0
# affiche le texte sur la sortie standard
out_to_console no
# réglage de la mémoire, pour éviter le clignotement
double_buffer yes
# Soustraire les mémoires tampons de la mémoire utilisée
no_buffers yes
text_buffer_size 2048
# taux de rafraichissement de la fenêtre (en secondes)
update_interval 1
# nombre d'échantillons à utiliser pour calculer la moyenne d'utilisation
cpu_avg_samples 4
net_avg_samples 2
# taille et positon
alignment top_right
minimum_size 200 180
maximum_width 200
# écart avec le bord x=gauche ou droit y= haut ou bas
gap_x 35
gap_y 55
# afficher les ombres
draw_shades yes
# afficher des contours
draw_outline no
# contours autour des blocs de texte
draw_borders no
# largeur du contour
border_width 0
#pour que conky tourne en arrière plan background no pour les tests
background no
# utiliser sa propre fenêtre
own_window yes
own_window_argb_visual yes
#type de fenêtre : normal(avec le cadre) / override / desktop
own_window_type override
#pseudo transparence si vous avez des icones sous le conky elle ne seront plus accessibles une fois conky activé
own_window_transparent yes
# Utiliser Xft (polices lissées etc)
use_xft yes
xftalpha 0.5
override_utf8_locale yes # force UTF8
#police a utiliser : use_xft doit être a "yes"
xftfont caviar dreams:size=8
# Tout le texte en majuscule
uppercase no
# Ajoute des espaces après certains objets pour éviter de les faire bouger.
# Fonctionne uniquement avec les polices Fixes
use_spacer right
# Couleurs
default_color FFFFFF #blanc
default_shade_color 000000 #noir
default_outline_color black
TEXT
#DATE
${voffset 8}${color FF6600}${font caviar dreams:size=16}${time %A}${font}${voffset -8}${alignr 50}${color FFFFFF}${font caviar dreams:size=38}${time %e}${font}
${color FFFFFF}${voffset -30}${color FFFFFF}${font caviar dreams:size=18}${time %b}${font}${voffset 0} ${color FFFFFF}${font caviar dreams:size=20}${time %Y}${font}${color FF6600}${hr}
#INFOS CPU-RAM-BAT
${goto 0}${voffset 35}${color FF6600}CPU ${color FFFFFF}${cpu cpu0}%${color FFFFFF}${goto 82}${memperc}%${goto 150}${color FF6600}${goto 55}RAM${goto 150}${color FFFFFF}${goto 160}${battery_percent}%${color FF6600}${goto 115}Batterie
#INFOS SYSTEME
${color FF6600}${font caviar dreams:size=8}${alignr}${nodename}
${color FF6600}${font caviar dreams:size=8}${alignr}${pre_exec cat /etc/issue.net} $machine
${color FF6600}${font caviar dreams:size=8}${alignr}Kernel: ${kernel}
conky basiqueHors ligne
#259 Le 30/05/2013, à 17:38
- 6-ril
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
Salut Didier-T
Si j'ai bien suivi, j'ai ajouté " own_window_argb_visual yes " à mon fichier .conkyrc
Mais le résultat reste le même...
Hors ligne
#260 Le 30/05/2013, à 18:10
- Didier-T
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
6-ril a écrit :
Salut Didier-T
Si j'ai bien suivi, j'ai ajouté " own_window_argb_visual yes " à mon fichier .conkyrc
Mais le résultat reste le même...
étrange, tu es sous quelle distribution ?
Hors ligne
#261 Le 31/05/2013, à 07:28
- ragamatrix
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
Didier-T a écrit :
@ ragamatrix,
le script qui posait problème est corrigé.
doublerings.lua
-- 2011 changed by LaGaDesk settings_table = { { -- Edit this table to customise your rings. -- You can create more rings simply by adding more elements to settings_table. -- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'. name='time', -- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''. arg='%I.%M', -- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100. max=12, -- "bg_colour" is the colour of the base ring. bg_colour=0xFFFFFF, -- "bg_alpha" is the alpha value of the base ring. bg_alpha=0.1, -- "fg_colour" is the colour of the indicator part of the ring. fg_colour=0x6948FF, -- "fg_alpha" is the alpha value of the indicator part of the ring. fg_alpha=0.75, -- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window. x=1180, y=35, -- "radius" is the radius of the ring. radius=23, -- "thickness" is the thickness of the ring, centred around the radius. thickness=2, -- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative. start_angle=0, -- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle. end_angle=360 }, { name='cpu', arg='cpu1', max=100, bg_colour=0xFFFFFF, bg_alpha=0.1, fg_colour=0x00EE00, fg_alpha=0.8, x=590, y=35, radius=20, thickness=2, start_angle=0, end_angle=360 }, { name='cpu', arg='cpu2', max=100, bg_colour=0xFFFFFF, bg_alpha=0.1, fg_colour=0x00EE00, fg_alpha=0.8, x=660, y=35, radius=20, thickness=2, start_angle=0, end_angle=360 }, { name='memperc', arg='', max=100, bg_colour=0xFFFFFF, bg_alpha=0.1, fg_colour=0xFFFF00, fg_alpha=0.8, x=730, y=35, radius=20, thickness=2, start_angle=0, end_angle=360 }, { name='fs_used_perc', arg='/', max=100, bg_colour=0xFFFFFF, bg_alpha=0.1, fg_colour=0x1E90FF, fg_alpha=0.8, x=290, y=35, radius=23, thickness=2, start_angle=0, end_angle=360 }, { name='fs_used_perc', arg='/home', max=100, bg_colour=0xFFFFFF, bg_alpha=0.1, fg_colour=0x1E90FF, fg_alpha=0.8, x=290, y=35, radius=18, thickness=2, start_angle=0, end_angle=360 }, } -- Use these settings to define the origin and extent of your clock. clock_r=20 -- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window. clock_x=1180 clock_y=35 show_seconds=true require 'cairo' local cs, cr = nil -------------------------------------------------------------------------------------------------------------------------- -- rgb_to_r_g_b -- converts color in hexa to decimal -- function rgb_to_r_g_b(colour, alpha) return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha end -------------------------------------------------------------------------------------------------------------------------- function draw_ring(cr,t,pt) local w,h=conky_window.width,conky_window.height local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle'] local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha'] local angle_0=sa*(2*math.pi/360)-math.pi/2 local angle_f=ea*(2*math.pi/360)-math.pi/2 local t_arc=t*(angle_f-angle_0) -- Draw background ring cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f) cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga)) cairo_set_line_width(cr,ring_w) cairo_stroke(cr) -- Draw indicator ring cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc) cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga)) cairo_stroke(cr) end function draw_clock_hands(cr,xc,yc) local secs,mins,hours,secs_arc,mins_arc,hours_arc local xh,yh,xm,ym,xs,ys secs=os.date("%S") mins=os.date("%M") hours=os.date("%I") secs_arc=(2*math.pi/60)*secs mins_arc=(2*math.pi/60)*mins+secs_arc/60 hours_arc=(2*math.pi/12)*hours+mins_arc/12 -- Draw hour hand xh=xc+0.7*clock_r*math.sin(hours_arc) yh=yc-0.7*clock_r*math.cos(hours_arc) cairo_move_to(cr,xc,yc) cairo_line_to(cr,xh,yh) cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND) cairo_set_line_width(cr,5) cairo_set_source_rgba(cr,0.9,0.9,0.9,0.9) cairo_stroke(cr) -- Draw minute hand xm=xc+clock_r*math.sin(mins_arc) ym=yc-clock_r*math.cos(mins_arc) cairo_move_to(cr,xc,yc) cairo_line_to(cr,xm,ym) cairo_set_line_width(cr,3) cairo_stroke(cr) -- Draw seconds hand if show_seconds then xs=xc+clock_r*math.sin(secs_arc) ys=yc-clock_r*math.cos(secs_arc) cairo_move_to(cr,xc,yc) cairo_line_to(cr,xs,ys) cairo_set_line_width(cr,1) cairo_set_source_rgba(cr,0.9,0.2,0.1,0.8) cairo_stroke(cr) end end function conky_clock_rings() local function setup_rings(cr,pt) local str='' local value=0 str=string.format('${%s %s}',pt['name'],pt['arg']) str=conky_parse(str) value=tonumber(str) pct=value/pt['max'] draw_ring(cr,pct,pt) end -- Check that Conky has been running for at least 5s if conky_window==nil then return end local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height) local cr=cairo_create(cs) local updates=conky_parse('${updates}') update_num=tonumber(updates) if update_num>5 then for i in pairs(settings_table) do setup_rings(cr,settings_table[i]) end end draw_clock_hands(cr,clock_x,clock_y) cairo_destroy(cr) cairo_surface_destroy(cs) cr=nil collectgarbage() end
Merci Didier-T
Je testerais cette modif dès mon retour devant mon poste linux... Ici windows... 
Quelle est la modification ?
Est-il possible de la faire sur d'autres scripts ?
bonne journée
Hors ligne
#262 Le 31/05/2013, à 07:50
- ragamatrix
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
Salut;
@6-ril
6-ril a écrit :
D'autre part, comment peut-t-on choisir l'écran sur lequel l'afficher?
Tu peux faire ça avec ce script et tous les conkys que tu veux à condition d'enlever l'option "sticky" sur chacun d'eux.
Tu dois installer wmctrl (dans synaptic ou en ligne de commande c'est dans la boite)
Pour l'explication et les script c'est par ici post#4883
Si l' Anglais pose problème j'essaierais de traduire. 0=bureau 1 1=bureau 2 etc...
Hors ligne
#263 Le 31/05/2013, à 09:28
- 6-ril
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
@ Didier-T
Je suis sous Ubuntu 13.04 64bit
J'ai remplacé mon script par celui là :
# Conky settings #
background no
update_interval 1
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale yes
double_buffer yes
no_buffers yes
text_buffer_size 2048
#imlib_cache_size 0
temperature_unit fahrenheit
# Window specifications #
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below
border_inner_margin 0
border_outer_margin 0
minimum_size 200 250
maximum_width 200
alignment tr
gap_x 35
gap_y 55
# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
# Text settings #
use_xft yes
xftfont caviar dreams:size=8
xftalpha 0.5
uppercase no
temperature_unit celsius
default_color FFFFFF
# Lua Load #
lua_load ~/.conky/clock_rings.lua
lua_draw_hook_pre clock_rings
TEXT
${voffset 8}${color FF6600}${font caviar dreams:size=16}${time %A}${font}${voffset -8}${alignr 50}${color FFFFFF}${font caviar dreams:size=38}${time %e}${font}
${color FFFFFF}${voffset -30}${color FFFFFF}${font caviar dreams:size=18}${time %b}${font}${voffset -3} ${color FFFFFF}${font caviar dreams:size=20}${time %Y}${font}${color FF6600}${hr}
${voffset 140}${font caviar dreams:size=10}${alignr}HOME${font}
${font caviar dreams:size=12}${color FFFFFF}${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ LQBK temperature temperature 30} °C${font}
${image ~/.conky/new-ubuntu-logo.png -p 64,125 -s 70x20}
${color FFFFFF}${goto 25}${voffset 35}${cpu cpu0}%
${color FF6600}${goto 25}CPU
${color FFFFFF}${goto 50}${voffset 23}${memperc}%
${color FF6600}${goto 50}RAM
${color FFFFFF}${goto 75}${voffset 23}${swapperc}%
${color FF6600}${goto 75}Swap
${color FFFFFF}${goto 100}${voffset 23}${fs_used_perc /}%
${color FF6600}${goto 100}Disk
${color FFFFFF}${goto 125}${voffset 25}${downspeed eth0}
${color FFFFFF}${goto 125}${upspeed eth0}
${color FF6600}${goto 125}Net
${color FFFFFF}${font caviar dreams:size=8}Uptime: ${uptime_short}
${color FFFFFF}${font caviar dreams:size=8}Processes: ${processes}
${color FFFFFF}${font caviar dreams:size=8}Running: ${running_processes}
${color FF6600}${font caviar dreams:size=8}${alignr}${nodename}
${color FF6600}${font caviar dreams:size=8}${alignr}${pre_exec cat /etc/issue.net} $machine
${color FF6600}${font caviar dreams:size=8}${alignr}Kernel: ${kernel}Maintenant, j'ai bien mon conky que est transparent mais pas immédiatement !
Quand il se lance, le fond est noir puis au bout d'un moment il devient transparent ... bizarre non ?
Et je ne vois pas de différence au niveau de # Window specifications # par rapport au script précédent ...
Hors ligne
#264 Le 31/05/2013, à 09:28
- 6-ril
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
@ ragamatrix,
Merci, je vais regarder ça de plus prés. L'anglais ne va pas poser problème ;-)
Hors ligne
#265 Le 31/05/2013, à 21:24
- Didier-T
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
@ ragamatrix,
j'ai ajouté les lignes suivantes.
cairo_destroy(cr)
cairo_surface_destroy(cs)
cr=nil
collectgarbage()dans l'ordre, ont détruit le dessin, puis la surface à dessiner, comme parfois le dessin résiste, on passe sa valeur à nil, et enfin une petite purge des mémoires local.
la sa correspond aux besoins, mais tout dépend des objet créés.
@ 6-ril,
tu peut tenter d'ajouter ceci
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,belowc'est la seul différence que je remarque en ce qui concerne l'affichage.
pour l'histoire du fond noir qui devient transparent, c'est lié a la fausse transparence de conky, il y a une latence, c'est pour sa que j'ajoute le own_window_argb_visual yes.
Hors ligne
#266 Le 04/06/2013, à 13:48
- ragamatrix
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
Salut Didier-T;
Merci pour ces modifications et explications. (pour les rings)
On ne peut pas ajouter ces lignes dans différents scripts où faut-il les déclarer ?
Tu m'avais aussi expliqué comment récupérer une url pour une image en faisant une extraction à cette page
Mon problème c'est que l'adresse de ma radio préférée à changé ou n'est plus valide; on peut l'écouter que via ce site: wegofunk
J'ai essayer de faire ctrl+i (firefox) ensuite media et rechercher celle ci mais ça ne fonctionne pas...
Donc ma question 
: Est-il possible d'extraire l'adresse de la radio jouée sur ce site ?
Il existe toujours une radio qui diffuse avec l'url de wegofunk mais ce n'est pas cette musique que j'écoute habituellement... Ancienne adresse url valide sur laquelle une autre radio diffuse : http://listen.radionomy.com/wegofunk.m3u
Tout cela me parait un peu "louche"...
Si tu m'as compris BRAVO ! J'ai essayé d'être clair pour quelque chose qui ne l'est pas 
Je pourrais ensuite re-utiliser mon conky me donnant les informations des artistes joués.
Hors ligne
#267 Le 05/06/2013, à 15:12
- Didier-T
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
@ ragamatrix,
c'est ligne peuvent être ajoutées a d'autres scripts, mais ne seront pas forcement utiles, sa dépend des objets créés.
il faut les mettre a la fin de la fonction appelé par le conky.
en ce qui concerne la radio, cher moi sa fonctionne, j'ai simplement ouvert le lien avec clémentine, par contre il l'appel "radionomy".
mais tu devrais regarder ceci
Hors ligne
#268 Le 05/06/2013, à 16:19
- ragamatrix
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
Hors ligne
#269 Le 05/06/2013, à 21:23
- ragamatrix
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
Didier-T a écrit :
@ ragamatrix,
j'ai ajouté les lignes suivantes.cairo_destroy(cr)
cairo_surface_destroy(cs)
cr=nil
collectgarbage()dans l'ordre, ont détruit le dessin, puis la surface à dessiner, comme parfois le dessin résiste, on passe sa valeur à nil, et enfin une petite purge des mémoires local.
la sa correspond aux besoins, mais tout dépend des objet créés.
J'ai essayé dans ce script de placer ces quatre lignes à la fin du menu demandé par conky mais cela ne fonctionne pas ...
Pour l'autre c'est nickel ! Merci
rings.lua:
--[[ RINGS with SECTORS widget
v1.1 by wlourf (07 Jan. 2011)
this widget draws a ring with differents effects
http://u-scripts.blogspot.com/2010/08/rings-sectors-widgets.html
To call the script in a conky, use, before TEXT
lua_load /path/to/the/script/rings.lua
lua_draw_hook_pre main_rings
and add one line (blank or not) after TEXT
Parameters are :
3 parameters are mandatory
name - the name of the conky variable to display,
for example for {$cpu cpu0}, just write name="cpu"
arg - the argument of the above variable,
for example for {$cpu cpu0}, just write arg="cpu0"
arg can be a numerical value if name=""
max - the maximum value the above variable can reach,
for example for {$cpu cpu0}, just write max=100
Optional parameters:
xc,yc - coordinates of the center of the ring,
default = middle of the conky window
radius - external radius of the ring, in pixels,
default = quarter of the width of the conky window
thickness - thickness of the ring, in pixels, default = 10 pixels
start_angle - starting angle of the ring, in degrees, value can be negative,
default = 0 degree
end_angle - ending angle of the ring, in degrees,
value must be greater than start_angle, default = 360 degrees
sectors - number of sectors in the ring, default = 10
gap_sectors - gap between two sectors, in pixels, default = 1 pixel
cap - the way to close a sector, available values are
"p" for parallel , default value
"r" for radial (follow the radius)
inverse_arc - if set to true, arc will be anticlockwise, default=false
border_size - size of the border, in pixels, default = 0 pixel i.e. no border
fill_sector - if set to true, each sector will be completely filled,
default=false, this parameter is inoperate if sectors=1
background - if set to false, background will not be drawn, default=true
foreground - if set to false, foreground will not be drawn, default=true
Colours tables below are defined into braces :
{position in the gradient (0 to 1), colour in hexadecimal, alpha (0 to 1)}
example for a single colour table :
{{0,0xFFAA00,1}} position parameter doesn't matter
example for a two-colours table :
{{0,0xFFAA00,1},{1,0x00AA00,1}} or {{0.5,0xFFAA00,1},{1,0x00AA00,1}}
example for a three-colours table :
{{0,0xFFAA00,1},{0.5,0xFF0000,1},{1,0x00AA00,1}}
bg_colour1 - colour table for background,
default = {{0,0x00ffff,0.1},{0.5,0x00FFFF,0.5},{1,0x00FFFF,0.1}}
fg_colour1 - colour table for foreground,
default = {{0,0x00FF00,0.1},{0.5,0x00FF00,1},{1,0x00FF00,0.1}}
bd_colour1 - colour table for border,
default = {{0,0xFFFF00,0.5},{0.5,0xFFFF00,1},{1,0xFFFF00,0.5}}
Seconds tables for radials gradients :
bg_colour2 - second colour table for background, default = no second colour
fg_colour2 - second colour table for foreground, default = no second colour
bd_colour2 - second colour table for border, default = no second colour
draw_me - if set to false, text is not drawn (default = true or 1)
it can be used with a conky string, if the string returns 1, the text is drawn :
example : "${if_empty ${wireless_essid wlan0}}${else}1$endif",
v1.0 (08 Aug. 2010) original release
v1.1 (07 Jan. 2011) Add draw_me parameter and correct memory leaks, thanks to "Creamy Goodness"
text is parsed inside the function, not in the array of settings
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation version 3 (GPLv3)
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-- MA 02110-1301, USA.
]]
require 'cairo'
function conky_main_rings()
-- START PARAMETERS HERE
local rings_settings={
--line1
{
name="cpu",
arg="",
max=100,
xc=530,
yc=35,
thickness=4,
radius=22,
sectors=100,
gap_sectors=0,
bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.4},{1,0xFFFFFF,0.1}},
fg_colour1={{0,0x00FF00,0.1},{0.5,0x00FF00,1.0},{1,0x00FF00,0.1}},
fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},
},
{
name="memperc",
arg="",
max=100,
xc=600,
yc=35,
thickness=4,
radius=22,
sectors=100,
gap_sectors=0,
start_angle=0,
end_angle=360,
bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.6},{1,0xFFFFFF,0.1}},
fg_colour1={{0,0xFFFF00,0.1},{0.5,0xFFFF00,1.0},{1,0xFFFF00,0.1}},
fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},
},
{
name="cpu",
arg="cpu0",
max=100,
xc=670,
yc=35,
thickness=4,
radius=22,
sectors=100,
gap_sectors=0,
bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.4},{1,0xFFFFFF,0.1}},
fg_colour1={{0,0x00FF00,0.1},{0.5,0x00FF00,1.0},{1,0x00FF00,0.1}},
fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},
},
{
name="fs_used_perc",
arg='/',
max=100,
gap_sectors=0,
sectors=100,
bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.4},{1,0xFFFFFF,0.1}},
fg_colour1={{0,0x1E90FF,0.1},{0.5,0x1E90FF,1.0},{1,0x1E90FF,0.1}},
fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},
xc=230,
yc=35,
radius=23,
thickness=2,
},
{
name="fs_used_perc",
arg="/home",
max=100,
gap_sectors=0,
sectors=100,
bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.4},{1,0xFFFFFF,0.1}},
fg_colour1={{0,0x1E90FF,0.1},{0.5,0x1E90FF,1.0},{1,0x1E90FF,0.1}},
fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},
xc=230,
yc=35,
radius=20,
thickness=2,
},
}
--END OF PARAMETERS HERE
--main function
--if conky_window==nil then return end
if conky_window==nil then return end
local cs=cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
local cr=cairo_create(cs)
local cr=cairo_create(cs)
local extents=cairo_text_extents_t:create()
tolua.takeownership(extents)
if tonumber(conky_parse('${updates}'))>3 then
for i in pairs(rings_settings) do
draw_ring(cr,rings_settings[i])
end
end
cairo_destroy(cr)
end
function draw_ring(cr, t)
local function rgba_to_r_g_b_a(tcolour)
local colour,alpha=tcolour[2],tcolour[3]
return ((colour / 0x10000) % 0x100) / 255.,
((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end
local function calc_delta(tcol1,tcol2)
--calculate deltas P R G B A to table_colour 1
for x = 1, #tcol1 do
tcol1[x].dA = 0
tcol1[x].dP = 0
tcol1[x].dR = 0
tcol1[x].dG = 0
tcol1[x].dB = 0
if tcol2~=nil and #tcol1 == #tcol2 then
local r1,g1,b1,a1 = rgba_to_r_g_b_a(tcol1[x])
local r2,g2,b2,a2 = rgba_to_r_g_b_a(tcol2[x])
tcol1[x].dP = (tcol2[x][1]-tcol1[x][1])/t.sectors
tcol1[x].dR = (r2-r1)/t.sectors
tcol1[x].dG = (g2-g1)/t.sectors
tcol1[x].dB = (b2-b1)/t.sectors
tcol1[x].dA = (a2-a1)/t.sectors
end
end
return tcol1
end
--check values
local function setup(t)
if t.name==nil and t.arg==nil then
print ("No input values ... use parameters 'name'" +
" with 'arg' or only parameter 'arg' ")
return
end
if t.max==nil then
print ("No maximum value defined, use 'max'")
print ("for name=" .. t.name)
print ("with arg=" .. t.arg)
return
end
if t.name==nil then t.name="" end
if t.arg==nil then t.arg="" end
if t.xc==nil then t.xc=conky_window.width/2 end
if t.yc==nil then t.yc=conky_window.height/2 end
if t.thickness ==nil then t.thickness = 10 end
if t.radius ==nil then t.radius =conky_window.width/4 end
if t.start_angle==nil then t.start_angle =0 end
if t.end_angle==nil then t.end_angle=360 end
if t.bg_colour1==nil then
t.bg_colour1={{0,0x00ffff,0.1},{0.5,0x00FFFF,0.5},{1,0x00FFFF,0.1}}
end
if t.fg_colour1==nil then
t.fg_colour1={{0,0x00FF00,0.1},{0.5,0x00FF00,1},{1,0x00FF00,0.1}}
end
if t.bd_colour1==nil then
t.bd_colour1={{0,0xFFFF00,0.5},{0.5,0xFFFF00,1},{1,0xFFFF00,0.5}}
end
if t.sectors==nil then t.sectors=10 end
if t.gap_sectors==nil then t.gap_sectors=1 end
if t.fill_sector==nil then t.fill_sector=false end
if t.sectors==1 then t.fill_sector=false end
if t.border_size==nil then t.border_size=0 end
if t.cap==nil then t.cap="p" end
--some checks
if t.thickness>t.radius then t.thickness=t.radius*0.1 end
t.int_radius = t.radius-t.thickness
--check colors tables
for i=1, #t.bg_colour1 do
if #t.bg_colour1[i]~=3 then t.bg_colour1[i]={1,0xFFFFFF,0.5} end
end
for i=1, #t.fg_colour1 do
if #t.fg_colour1[i]~=3 then t.fg_colour1[i]={1,0xFF0000,1} end
end
for i=1, #t.bd_colour1 do
if #t.bd_colour1[i]~=3 then t.bd_colour1[i]={1,0xFFFF00,1} end
end
if t.bg_colour2~=nil then
for i=1, #t.bg_colour2 do
if #t.bg_colour2[i]~=3 then t.bg_colour2[i]={1,0xFFFFFF,0.5} end
end
end
if t.fg_colour2~=nil then
for i=1, #t.fg_colour2 do
if #t.fg_colour2[i]~=3 then t.fg_colour2[i]={1,0xFF0000,1} end
end
end
if t.bd_colour2~=nil then
for i=1, #t.bd_colour2 do
if #t.bd_colour2[i]~=3 then t.bd_colour2[i]={1,0xFFFF00,1} end
end
end
if t.start_angle>=t.end_angle then
local tmp_angle=t.end_angle
t.end_angle= t.start_angle
t.start_angle = tmp_angle
-- print ("inversed angles")
if t.end_angle-t.start_angle>360 and t.start_angle>0 then
t.end_angle=360+t.start_angle
print ("reduce angles")
end
if t.end_angle+t.start_angle>360 and t.start_angle<=0 then
t.end_angle=360+t.start_angle
print ("reduce angles")
end
if t.int_radius<0 then t.int_radius =0 end
if t.int_radius>t.radius then
local tmp_radius=t.radius
t.radius=t.int_radius
t.int_radius=tmp_radius
print ("inversed radius")
end
if t.int_radius==t.radius then
t.int_radius=0
print ("int radius set to 0")
end
end
t.fg_colour1 = calc_delta(t.fg_colour1,t.fg_colour2)
t.bg_colour1 = calc_delta(t.bg_colour1,t.bg_colour2)
t.bd_colour1 = calc_delta(t.bd_colour1,t.bd_colour2)
end
if t.draw_me == true then t.draw_me = nil end
if t.draw_me ~= nil and conky_parse(tostring(t.draw_me)) ~= "1" then return end
--initialize table
setup(t)
--initialize cairo context
cairo_save(cr)
cairo_translate(cr,t.xc,t.yc)
cairo_set_line_join (cr, CAIRO_LINE_JOIN_ROUND)
cairo_set_line_cap (cr, CAIRO_LINE_CAP_ROUND)
--get value
local value = 0
if t.name ~="" then
value = tonumber(conky_parse(string.format('${%s %s}', t.name, t.arg)))
else
value = tonumber(t.arg)
end
if value==nil then value =0 end
--initialize sectors
--angle of a sector :
local angleA = ((t.end_angle-t.start_angle)/t.sectors)*math.pi/180
--value of a sector :
local valueA = t.max/t.sectors
--first angle of a sector :
local lastAngle = t.start_angle*math.pi/180
local function draw_sector(type_arc,angle0,angle,valpc, idx)
--this function draws a portion of arc
--type of arc, angle0 = strating angle, angle= angle of sector,
--valpc = percentage inside the sector, idx = sctor number #
local tcolor
if type_arc=="bg" then --background
if valpc==1 then return end
tcolor=t.bg_colour1
elseif type_arc=="fg" then --foreground
if valpc==0 then return end
tcolor=t.fg_colour1
elseif type_arc=="bd" then --border
tcolor=t.bd_colour1
end
--angles equivalents to gap_sector
local ext_delta=math.atan(t.gap_sectors/(2*t.radius))
local int_delta=math.atan(t.gap_sectors/(2*t.int_radius))
--angles of arcs
local ext_angle=(angle-ext_delta*2)*valpc
local int_angle=(angle-int_delta*2)*valpc
--define colours to use for this sector
if #tcolor==1 then
--plain color
local vR,vG,vB,vA = rgba_to_r_g_b_a(tcolor[1])
cairo_set_source_rgba(cr,vR+tcolor[1].dR*idx,
vG+tcolor[1].dG*idx,
vB+tcolor[1].dB*idx,
vA+tcolor[1].dA*idx )
else
--radient color
local pat=cairo_pattern_create_radial(0,0,t.int_radius,0,0,t.radius)
for i=1, #tcolor do
local vP,vR,vG,vB,vA = tcolor[i][1], rgba_to_r_g_b_a(tcolor[i])
cairo_pattern_add_color_stop_rgba (pat,
vP+tcolor[i].dP*idx,
vR+tcolor[i].dR*idx,
vG+tcolor[i].dG*idx,
vB+tcolor[i].dB*idx,
vA+tcolor[i].dA*idx )
end
cairo_set_source (cr, pat)
cairo_pattern_destroy(pat)
end
--start drawing
cairo_save(cr)
--x axis is parrallel to start of sector
cairo_rotate(cr,angle0-math.pi/2)
local ri,re = t.int_radius ,t.radius
--point A
local angle_a
if t.cap == "p" then
angle_a = int_delta
if t.inverse_arc and type_arc ~="bg" then
angle_a = angle-int_angle-int_delta
end
if not(t.inverse_arc) and type_arc =="bg" then
angle_a = int_delta+int_angle
end
else --t.cap=="r"
angle_a = ext_delta
if t.inverse_arc and type_arc~="bg" then
angle_a = angle-ext_angle-ext_delta
end
if not(t.inverse_arc) and type_arc=="bg" then
angle_a = ext_delta+ext_angle
end
end
local ax,ay = ri*math.cos(angle_a),ri*math.sin(angle_a)
--point B
local angle_b = ext_delta
if t.cap == "p" then
if t.inverse_arc and type_arc ~="bg" then
angle_b = angle-ext_angle-ext_delta
end
if not(t.inverse_arc) and type_arc=="bg" then
angle_b = ext_delta+ext_angle
end
else
if t.inverse_arc and type_arc ~="bg" then
angle_b = angle-ext_angle-ext_delta
end
if not(t.inverse_arc) and type_arc=="bg" then
angle_b = ext_delta+ext_angle
end
end
local bx,by = re*math.cos(angle_b),re*math.sin(angle_b)
-- EXTERNAL ARC B --> C
local b0,b1
if t.inverse_arc then
if type_arc=="bg" then
b0,b1= ext_delta, angle-ext_delta-ext_angle
else
b0,b1= angle-ext_angle-ext_delta, angle-ext_delta
end
else
if type_arc=="bg" then
b0,b1= ext_delta+ext_angle, angle-ext_delta
else
b0,b1= ext_delta, ext_angle+ext_delta
end
end
---POINT D
local angle_c, angle_d
if t.cap == "p" then
angle_d = angle-int_delta
if t.inverse_arc and type_arc=="bg" then
angle_d = angle-int_delta-int_angle
end
if not(t.inverse_arc) and type_arc~="bg" then
angle_d=int_delta+int_angle
end
else
angle_d = angle-ext_delta
if t.inverse_arc and type_arc=="bg" then
angle_d =angle-ext_delta-ext_angle
end
if not(t.inverse_arc) and type_arc~="bg" then
angle_d = ext_angle+ext_delta
end
end
local dx,dy = ri*math.cos(angle_d),ri*math.sin(angle_d)
-- INTERNAL ARC D --> A
local d0,d1
if t.cap=="p" then
if t.inverse_arc then
if type_arc=="bg" then
d0,d1= angle-int_delta-int_angle,int_delta
else
d0,d1= angle-int_delta, angle- int_angle-int_delta
end
else
if type_arc=="bg" then
d0,d1= angle-int_delta, int_delta+int_angle
else
d0,d1= int_delta+int_angle, int_delta
end
end
else
if t.inverse_arc then
if type_arc=="bg" then
d0,d1= angle-ext_delta-ext_angle,ext_delta
else
d0,d1= angle-ext_delta, angle- ext_angle-ext_delta
end
else
if type_arc=="bg" then
d0,d1= angle-ext_delta,ext_delta+ext_angle
else
d0,d1= ext_angle+ext_delta, ext_delta
end
end
end
--draw sector
cairo_move_to(cr,ax,ay)
cairo_line_to(cr,bx,by)
cairo_arc(cr,0,0,re,b0,b1)
cairo_line_to(cr,dx,dy)
cairo_arc_negative(cr,0,0,ri,d0,d1)
cairo_close_path (cr);
--stroke or fill sector
if type_arc=="bd" then
cairo_set_line_width(cr,t.border_size)
cairo_stroke(cr)
else
cairo_fill(cr)
end
cairo_restore(cr)
end
--draw sectors
local n0,n1,n2 = 1,t.sectors,1
if t.inverse_arc then n0,n1,n2 = t.sectors,1,-1 end
local index = 0
for i = n0,n1,n2 do
index = index +1
local valueZ=1
local cstA, cstB = (i-1),i
if t.inverse_arc then cstA,cstB = (t.sectors-i), (t.sectors-i+1) end
if value>valueA *cstA and value<valueA*cstB then
if not t.fill_sector then
valueZ = (value-valueA*cstA)/valueA
end
else
if value<valueA*cstB then valueZ=0 end
end
local start_angle= lastAngle+(i-1)*angleA
if t.foreground ~= false then
draw_sector("fg",start_angle,angleA,valueZ, index)
end
if t.background ~= false then
draw_sector("bg",start_angle,angleA,valueZ, i)
end
if t.border_size>0 then draw_sector("bd",start_angle,angleA,1, i) end
end
cairo_restore(cr)
end
--[[END OF RING-SECTORS WIDGET]] Hors ligne
#270 Le 06/06/2013, à 05:30
- Didier-T
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
@ ragamatrix,
est tu certain que ce soit le script lua qui pose problème, tous les scripts de wourlf que j'ai testé étaient optimisés (dans leurs dernières version, bien sure).
Hors ligne
#271 Le 06/06/2013, à 08:25
- ragamatrix
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
Didier-T a écrit :
@ ragamatrix,
est tu certain que ce soit le script lua qui pose problème, tous les scripts de wourlf que j'ai testé étaient optimisés (dans leurs dernières version, bien sure).
Salut;
Bien je ne comprends pas j'utilisais un script rings.lua pour deadbeef que tu m'avais aidé à modifié (même base wlourf) afin de faire un "anneau de progression" et il n'y avait pas de problèmes...
Je vais repartir avec celui-ci pour tester.
Hors ligne
#272 Le 06/06/2013, à 11:31
- ragamatrix
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
@Didier-T
Je viens de laisser tourner ce script quelques heures et celui-ci pose problème avec xorg (au début 1.5%topcpu xorg et après 13%)... Tandis que doublerings.lua aucun problème.
Lorsque le script rings.lua tourne avec deadbeef pas de problème non plus(un seul ring)... Je me demande si cela ne concerne pas les tables avec les différentes couleurs et "differentes couches" pouvant être une demande d'xorg excessive..?
bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.4},{1,0xFFFFFF,0.1}},
fg_colour1={{0,0x1E90FF,0.1},{0.5,0x1E90FF,1.0},{1,0x1E90FF,0.1}},
fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},Hors ligne
#273 Le 11/06/2013, à 13:16
- ragamatrix
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
@Didier-T
@ ragamatrix,
est tu certain que ce soit le script lua qui pose problème, tous les scripts de wourlf que j'ai testé étaient optimisés (dans leurs dernières version, bien sure).
@Didier-T
Je viens de laisser tourner ce script quelques heures et celui-ci pose problème avec xorg (au début 1.5%topcpu xorg et après 13%)... Tandis que doublerings.lua aucun problème.
Lorsque le script rings.lua tourne avec deadbeef pas de problème non plus(un seul ring)... Je me demande si cela ne concerne pas les tables avec les différentes couleurs et "differentes couches" pouvant être une demande d'xorg excessive..?
J'ai donc enlevé une couche de couleur pour tous les rings et ajouté les lignes que tu as proposé et xorg reste aux alentours de 0.5 à 1.5%.
Je pense que le script peut faire ces trois couches de couleurs mais cela fait mal aux xorg des vieilles machines... 
exemple avec 2 couches :
bg_colour1={{0.5,0xFFFFFF,0.6},{1,0xFFFFFF,0.1}}, Hors ligne
#274 Le 15/06/2013, à 19:30
- chepioq
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
Bonjour,
J"ai trouvé un conky qui permet de m'afficher le nombre de mail dans ma boite gmail ( http://bliezkrieg.deviantart.com/art/Gm … -336207580 )
Est -ce qu'il y a un moyen, en cliquant sur ce conky, de lancer firefox dans mon compte gmail ?
Dernière modification par chepioq (Le 15/06/2013, à 19:33)
Tout est dans tout et réciproquement....
Hors ligne
#275 Le 15/06/2013, à 19:31
- Didier-T
Re : [5] Conky : Postez vos conkyrc ou certaines parties intéressantes
oui
Hors ligne