#1 Le 01/11/2007, à 23:40
- soane33
Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
Venant de windows, j'ai installé ubuntu 7.10 sur mon AMD Athlon XP 2600+ avec une carte mère Abit KD7A. Le systeme se lance, mais est sujet a des plantages inopiné des que je lance des application (pas de raison particuliere).
Voici un extrait du journal systeme lors du plantage :
SYSLOG
Nov 1 22:07:31 momo-desktop NetworkManager: <info> Updating allowed wireless network lists.
Nov 1 22:07:31 momo-desktop NetworkManager: <WARN> nm_dbus_get_networks_cb(): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless networks stored..
MESSAGE
Nov 1 22:06:53 momo-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
Nov 1 22:06:55 momo-desktop kernel: [ 27.656000] NET: Registered protocol family 17
Nov 1 22:06:59 momo-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.host_name
Nov 1 22:06:59 momo-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.domain_name
Nov 1 22:06:59 momo-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_domain
Nov 1 22:06:59 momo-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_servers
Nov 1 22:07:00 momo-desktop kernel: [ 32.360000] NET: Registered protocol family 10
Nov 1 22:07:00 momo-desktop kernel: [ 32.360000] lo: Disabled Privacy Extensions
J'ai vraiment besoin d'aide !!!!
Et je suis vraiment débutant...
Merci par avance
SOANE33
Hors ligne
#2 Le 02/11/2007, à 00:59
- foustala
Re : Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
Les extraits du dmesg ne sont pas forcement en rapport avec le freeze. Comment as tu choisi ces extraits.
tous l'historique se trouve ici.
ls -l /var/log/dmesg*il y en a un par boot
Hors ligne
#3 Le 02/11/2007, à 01:46
- soane33
Re : Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
Merci, voici le dernier log par contre, je ne sais pas bien quoi en faire :
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004fef0000 (usable)
[ 0.000000] BIOS-e820: 000000004fef0000 - 000000004fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000004fef3000 - 000000004ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 382MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5ec0
[ 0.000000] Entering add_active_range(0, 0, 327408) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 327408
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 327408
[ 0.000000] On node 0 totalpages: 327408
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 765 pages used for memmap
[ 0.000000] HighMem zone: 97267 pages, LIFO batch:31
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F78B0 checksum 0
[ 0.000000] ACPI: RSDP 000F78B0, 0014 (r0 KT600 )
[ 0.000000] ACPI: RSDT 4FEF3000, 002C (r1 KT600 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 4FEF3040, 0074 (r1 KT600 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 4FEF30C0, 4908 (r1 KT600 AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 4FEF0000, 0040
[ 0.000000] ACPI: APIC 4FEF7A00, 005A (r1 KT600 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 4ff00000:aed00000)
[ 0.000000] Built 1 zonelists. Total pages: 324851
[ 0.000000] Kernel command line: root=UUID=0529a446-8b79-40ae-beee-268a92ad42c7 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1936.416 MHz processor.
[ 18.785737] Console: colour VGA+ 80x25
[ 18.786669] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 18.787287] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 18.839271] Memory: 1286200k/1309632k available (2015k kernel code, 22268k reserved, 916k data, 364k init, 392128k highmem)
[ 18.839283] virtual kernel memory layout:
[ 18.839284] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 18.839285] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 18.839286] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 18.839288] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 18.839289] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 18.839290] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 18.839292] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 18.839296] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 18.839350] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 18.919249] Calibrating delay using timer specific routine.. 3876.22 BogoMIPS (lpj=7752440)
[ 18.919291] Security Framework v1.0.0 initialized
[ 18.919302] SELinux: Disabled at boot.
[ 18.919322] Mount-cache hash table entries: 512
[ 18.919508] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 18.919520] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 18.919523] CPU: L2 Cache: 512K (64 bytes/line)
[ 18.919527] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 18.919541] Compat vDSO mapped to ffffe000.
[ 18.919559] Checking 'hlt' instruction... OK.
[ 18.935419] SMP alternatives: switching to UP code
[ 18.935809] Freeing SMP alternatives: 11k freed
[ 18.936207] Early unpacking initramfs... done
[ 19.274212] ACPI: Core revision 20070126
[ 19.274331] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 19.289631] CPU0: AMD Athlon(tm) XP 2600+ stepping 00
[ 19.289658] Total of 1 processors activated (3876.22 BogoMIPS).
[ 19.290395] ENABLING IO-APIC IRQs
[ 19.290704] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 19.434499] Brought up 1 CPUs
[ 19.434674] Booting paravirtualized kernel on bare hardware
[ 19.434758] Time: 23:27:16 Date: 10/01/107
[ 19.434793] NET: Registered protocol family 16
[ 19.434904] EISA bus registered
[ 19.434919] ACPI: bus type pci registered
[ 19.436647] PCI: PCI BIOS revision 2.10 entry at 0xfaf40, last bus=1
[ 19.436650] PCI: Using configuration type 1
[ 19.436652] Setting up standard PCI resources
[ 19.439956] ACPI: EC: Look up EC in DSDT
[ 19.443701] ACPI: Interpreter enabled
[ 19.443704] ACPI: (supports S0 S1 S4 S5)
[ 19.443721] ACPI: Using IOAPIC for interrupt routing
[ 19.448743] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 19.448753] PCI: Probing PCI hardware (bus 00)
[ 19.449064] PCI quirk: region 4000-407f claimed by vt8235 PM
[ 19.449068] PCI quirk: region 5000-500f claimed by vt8235 SMB
[ 19.449350] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 19.462133] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 19.462277] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 6 7 10 11 12)
[ 19.462444] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 19.462592] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
[ 19.462716] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 19.462836] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 19.462955] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 19.463075] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 19.463239] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 19.463395] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 19.463569] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 19.463725] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
[ 19.463998] ACPI: Power Resource [PFAN] (on)
[ 19.464006] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.464018] pnp: PnP ACPI init
[ 19.464031] ACPI: bus type pnp registered
[ 19.466639] pnp: PnP ACPI: found 13 devices
[ 19.466641] ACPI: ACPI bus type pnp unregistered
[ 19.466646] PnPBIOS: Disabled by ACPI PNP
[ 19.466702] PCI: Using ACPI for IRQ routing
[ 19.466706] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.486710] NET: Registered protocol family 8
[ 19.486713] NET: Registered protocol family 20
[ 19.486784] pnp: 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 19.486787] pnp: 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 19.486790] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 19.486793] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 19.486799] pnp: 00:02: ioport range 0x4000-0x407f has been reserved
[ 19.486802] pnp: 00:02: ioport range 0x5000-0x500f has been reserved
[ 19.490365] Time: tsc clocksource has been installed.
[ 19.517087] PCI: Bridge: 0000:00:01.0
[ 19.517090] IO window: c000-cfff
[ 19.517095] MEM window: e8000000-e9ffffff
[ 19.517099] PREFETCH window: d8000000-e7ffffff
[ 19.517115] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 19.517129] NET: Registered protocol family 2
[ 19.554339] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 19.554590] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 19.557226] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 19.558175] TCP: Hash tables configured (established 131072 bind 65536)
[ 19.558178] TCP reno registered
[ 19.566412] checking if image is initramfs... it is
[ 20.017554] Switched to high resolution mode on CPU 0
[ 20.203447] Freeing initrd memory: 7351k freed
[ 20.203949] audit: initializing netlink socket (disabled)
[ 20.203966] audit(1193959637.040:1): initialized
[ 20.204046] highmem bounce pool size: 64 pages
[ 20.206014] VFS: Disk quotas dquot_6.5.1
[ 20.206071] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.206187] io scheduler noop registered
[ 20.206190] io scheduler anticipatory registered
[ 20.206192] io scheduler deadline registered
[ 20.206206] io scheduler cfq registered (default)
[ 20.206219] PCI: VIA PCI bridge detected. Disabling DAC.
[ 20.206274] Boot video device is 0000:01:00.0
[ 20.206448] isapnp: Scanning for PnP cards...
[ 20.559716] isapnp: No Plug & Play device found
[ 20.585831] Real Time Clock Driver v1.12ac
[ 20.585965] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 20.586062] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.586723] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.587552] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 20.587788] input: Macintosh mouse button emulation as /class/input/input0
[ 20.587873] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 20.588225] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.588231] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.588412] mice: PS/2 mouse device common for all mice
[ 20.588525] EISA: Probing bus 0 at eisa.0
[ 20.588545] Cannot allocate resource for EISA slot 4
[ 20.588548] Cannot allocate resource for EISA slot 5
[ 20.588561] EISA: Detected 0 cards.
[ 20.588820] TCP cubic registered
[ 20.588831] NET: Registered protocol family 1
[ 20.588851] Using IPI No-Shortcut mode
[ 20.589027] Magic number: 15:471:503
[ 20.589770] Freeing unused kernel memory: 364k freed
[ 20.636668] input: AT Translated Set 2 keyboard as /class/input/input1
[ 21.800142] AppArmor: AppArmor initialized<5>audit(1193959638.540:2): type=1505 info="AppArmor initialized" pid=1187
[ 21.806953] fuse init (API version 7.8)
[ 21.811914] Failure registering capabilities with primary security module.
[ 21.822732] ACPI: Fan [FAN] (on)
[ 21.827194] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 21.829752] ACPI: Thermal Zone [THRM] (61 C)
[ 22.402849] usbcore: registered new interface driver usbfs
[ 22.402880] usbcore: registered new interface driver hub
[ 22.402906] usbcore: registered new device driver usb
[ 22.403756] USB Universal Host Controller Interface driver v3.0
[ 22.404161] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 22.404164] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 22.404175] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 22.404190] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 22.404393] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 22.404426] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000d000
[ 22.404585] usb usb1: configuration #1 chosen from 1 choice
[ 22.404623] hub 1-0:1.0: USB hub found
[ 22.404634] hub 1-0:1.0: 2 ports detected
[ 22.501512] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 22.501519] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 22.505782] ACPI: PCI Interrupt 0000:00:10.1[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 22.505799] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 22.505830] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 22.505854] uhci_hcd 0000:00:10.1: irq 16, io base 0x0000d400
[ 22.505981] usb usb2: configuration #1 chosen from 1 choice
[ 22.506018] hub 2-0:1.0: USB hub found
[ 22.506029] hub 2-0:1.0: 2 ports detected
[ 22.566238] SCSI subsystem initialized
[ 22.571532] libata version 2.21 loaded.
[ 22.609592] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 22.609608] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 22.609649] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 22.609674] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000d800
[ 22.609794] usb usb3: configuration #1 chosen from 1 choice
[ 22.609825] hub 3-0:1.0: USB hub found
[ 22.609836] hub 3-0:1.0: 2 ports detected
[ 22.613248] Floppy drive(s): fd0 is 1.44M
[ 22.650825] FDC 0 is a post-1991 82077
[ 22.716048] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 22.716068] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 22.716355] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 22.716411] ehci_hcd 0000:00:10.3: irq 16, io mem 0xea000000
[ 22.716418] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 22.716831] usb usb4: configuration #1 chosen from 1 choice
[ 22.717037] hub 4-0:1.0: USB hub found
[ 22.717050] hub 4-0:1.0: 6 ports detected
[ 3.848000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.864000] Time: acpi_pm clocksource has been installed.
[ 3.872000] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[ 3.872000] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 3.872000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 17
[ 3.876000] eth0: VIA Rhine II at 0x1e400, 00:50:8d:54:5d:04, IRQ 17.
[ 3.876000] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[ 3.880000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 3.880000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.884000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 3.884000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 3.884000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 3.884000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 18
[ 3.884000] VP_IDE: chipset revision 6
[ 3.884000] VP_IDE: not 100% native mode: will probe irqs later
[ 3.884000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[ 3.884000] ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA
[ 3.884000] ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:pio, hdd:pio
[ 3.884000] Probing IDE interface ide0...
[ 4.300000] hda: ST380011A, ATA DISK drive
[ 4.748000] hdb: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
[ 4.804000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.812000] Probing IDE interface ide1...
[ 4.912000] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 5.072000] usb 2-2: configuration #1 chosen from 1 choice
[ 5.388000] hda: max request size: 512KiB
[ 5.400000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[ 5.400000] hda: cache flushes supported
[ 5.400000] hda: hda1 hda2 < hda5 >
[ 5.456000] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 5.456000] Uniform CD-ROM driver Revision: 3.20
[ 5.644000] Attempting manual resume
[ 5.644000] swsusp: Resume From Partition 3:5
[ 5.644000] PM: Checking swsusp image.
[ 5.648000] PM: Resume from disk failed.
[ 5.688000] kjournald starting. Commit interval 5 seconds
[ 5.688000] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.672000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.676000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.812000] Linux agpgart interface v0.102 (c) Dave Jones
[ 12.924000] irda_init()
[ 12.924000] NET: Registered protocol family 23
[ 12.944000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 12.948000] agpgart: AGP aperture is 128M @ 0xd0000000
[ 13.848000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[ 13.852000] parport_pc 00:0a: reported by Plug and Play ACPI
[ 13.852000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 13.880000] input: PC Speaker as /class/input/input3
[ 13.972000] Linux video capture interface: v2.00
[ 14.076000] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.44
[ 14.080000] usb 2-2: SN9C103 PC Camera Controller detected (vid:pid 0x0C45:0x60AF)
[ 14.236000] usb 2-2: PAS202BCB image sensor detected
[ 14.276000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 14.276000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 14.276000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 14.280000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 14.756000] usb 2-2: Initialization succeeded
[ 14.756000] usb 2-2: V4L2 device registered as /dev/video0
[ 14.756000] usb 2-2: Optional device control through 'sysfs' interface disabled
[ 14.756000] usbcore: registered new interface driver sn9c102
[ 14.760000] usbcore: registered new interface driver snd-usb-audio
[ 15.832000] lp0: using parport0 (interrupt-driven).
[ 15.888000] Adding 3229024k swap on /dev/hda5. Priority:-1 extents:1 across:3229024k
[ 16.176000] EXT3 FS on hda1, internal journal----------------- C'est pas super comme litterature de chevet mais bon...
Merci par avance
Soane33
Dernière modification par soane33 (Le 02/11/2007, à 14:24)
Hors ligne
#4 Le 02/11/2007, à 02:02
- foustala
Re : Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
Heu... ca ne sert a rien de balancer des centaines de lignes de dmesg comme ca. utilise des balises Code au moins pour rendre la navigation plus aisée.
Ensuite comme indique plus haut, tu trouveras un dmesg par boot dans le dossier /var/log/. essaie de voir si il y a un dénominateur commun entre tous. Si il se finisse par la même erreur.
De plus essaie de booter sans l'acpi (je te laisse regarder dans la doc comment faire) ainsi qu'en recovery mode
Hors ligne
#5 Le 02/11/2007, à 02:17
- soane33
Re : Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
Qu'entend tu par Balise Code ??
Sinon, le freeze s'est produit apres une tentative de démarrage d'openoffice. Ca a planter sur le splash screen.
Je ne pouvais plus lancer d'application, j'ai donc redémarré puis des messages en mode texte m'ont signaler des "unattached inode". On dirait une corruption du systeme de fichier ou qqchose comme cela.
J'ai identifié les ligne du log avant le redémarrage :
5.440000] Uniform CD-ROM driver Revision: 3.20
[ 5.676000] Attempting manual resume
[ 5.676000] swsusp: Resume From Partition 3:5
[ 5.676000] PM: Checking swsusp image.
[ 5.676000] PM: Resume from disk failed.
[ 5.696000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 5.696000] EXT3-fs: write access will be enabled during recovery.
[ 9.596000] kjournald starting. Commit interval 5 seconds
[ 9.596000] EXT3-fs: hda1: orphan cleanup on readonly fs
[ 9.596000] ext3_orphan_cleanup: deleting unreferenced inode 7192787
[ 9.596000] EXT3-fs: hda1: 1 orphan inode deleted
[ 9.596000] EXT3-fs: recovery complete.
[ 9.604000] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.576000] Linux agpgart interface v0.102 (c) Dave Jones
Merci de ton aide
Soane33
Hors ligne
#6 Le 02/11/2007, à 02:25
- foustala
Re : Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
la corruption du systeme de fichier est une consequence des arrets brutaux et non la cause.
les balises codes (au dessus des smileys) te permettent de placer du texte dans des fenêtres avec ascenseurs. modifie ton message 3 stp
tu n'as pas essaye le acpi=off comme option de demarrage
Dernière modification par foustala (Le 02/11/2007, à 02:25)
Hors ligne
#7 Le 02/11/2007, à 15:03
- soane33
Re : Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
merci foustala
j'ai lu les différents postes pour acpi=off... mais la touche F6 en première page de démarrage n'active rien. Soit F3 m'envoie dans BIOS soit ESC m'envoie dans menu GRUB
J'ai donc pendant une session frapper acpi=off dans terminal, à priori il a pris en compte seulement je pense que quand j'ai redémarré il n'a pas conservé acpi-off ? je me trompe ?...
Je suis très nul... un petit lien vers la méthode pour démarrer en acpi=off afin que je t'édite les différents log de boot selon les scénario (normal, recovery et acpi=off) me sauverait.
Sinon j'ai identifié une error avec acpi quelque soit le mode de démarrage, est-ce que c'est ce que nous cherchons ?
---------------
[ 18.587017] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
---------------
merci de ton aide
Soane33
Hors ligne
#8 Le 02/11/2007, à 18:14
- soane33
Re : Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
Up!
Hors ligne
#9 Le 02/11/2007, à 21:41
- soane33
Re : Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
Persone ne peut donner suite à mon histoire de plantage ?
une petite explication sur l'acpi peut-être ?
Merci
-un débutant vraiment dans la mouise -
Hors ligne
#10 Le 03/11/2007, à 19:30
- soane33
Re : Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
Je tente ma chance avec les balises pour faciliter la navigation
le log en demarrage "normal"
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004fef0000 (usable)
[ 0.000000] BIOS-e820: 000000004fef0000 - 000000004fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000004fef3000 - 000000004ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 382MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5ec0
[ 0.000000] Entering add_active_range(0, 0, 327408) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 327408
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 327408
[ 0.000000] On node 0 totalpages: 327408
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 765 pages used for memmap
[ 0.000000] HighMem zone: 97267 pages, LIFO batch:31
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F78B0 checksum 0
[ 0.000000] ACPI: RSDP 000F78B0, 0014 (r0 KT600 )
[ 0.000000] ACPI: RSDT 4FEF3000, 002C (r1 KT600 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 4FEF3040, 0074 (r1 KT600 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 4FEF30C0, 4908 (r1 KT600 AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 4FEF0000, 0040
[ 0.000000] ACPI: APIC 4FEF7A00, 005A (r1 KT600 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 4ff00000:aed00000)
[ 0.000000] Built 1 zonelists. Total pages: 324851
[ 0.000000] Kernel command line: root=UUID=0529a446-8b79-40ae-beee-268a92ad42c7 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1936.227 MHz processor.
[ 18.604648] Console: colour VGA+ 80x25
[ 18.605579] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 18.606198] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 18.658367] Memory: 1286200k/1309632k available (2015k kernel code, 22268k reserved, 916k data, 364k init, 392128k highmem)
[ 18.658379] virtual kernel memory layout:
[ 18.658380] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 18.658382] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 18.658383] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 18.658384] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 18.658386] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 18.658387] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 18.658389] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 18.658393] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 18.658446] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 18.738345] Calibrating delay using timer specific routine.. 3876.23 BogoMIPS (lpj=7752470)
[ 18.738387] Security Framework v1.0.0 initialized
[ 18.738399] SELinux: Disabled at boot.
[ 18.738419] Mount-cache hash table entries: 512
[ 18.738605] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 18.738617] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 18.738620] CPU: L2 Cache: 512K (64 bytes/line)
[ 18.738624] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 18.738638] Compat vDSO mapped to ffffe000.
[ 18.738656] Checking 'hlt' instruction... OK.
[ 18.754516] SMP alternatives: switching to UP code
[ 18.754904] Freeing SMP alternatives: 11k freed
[ 18.755303] Early unpacking initramfs... done
[ 19.093318] ACPI: Core revision 20070126
[ 19.093437] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 19.108589] CPU0: AMD Athlon(tm) XP 2600+ stepping 00
[ 19.108618] Total of 1 processors activated (3876.23 BogoMIPS).
[ 19.109353] ENABLING IO-APIC IRQs
[ 19.109656] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 19.253595] Brought up 1 CPUs
[ 19.253770] Booting paravirtualized kernel on bare hardware
[ 19.253854] Time: 12:21:09 Date: 10/02/107
[ 19.253888] NET: Registered protocol family 16
[ 19.254000] EISA bus registered
[ 19.254015] ACPI: bus type pci registered
[ 19.255743] PCI: PCI BIOS revision 2.10 entry at 0xfaf40, last bus=1
[ 19.255746] PCI: Using configuration type 1
[ 19.255748] Setting up standard PCI resources
[ 19.259032] ACPI: EC: Look up EC in DSDT
[ 19.262776] ACPI: Interpreter enabled
[ 19.262779] ACPI: (supports S0 S1 S4 S5)
[ 19.262795] ACPI: Using IOAPIC for interrupt routing
[ 19.267822] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 19.267833] PCI: Probing PCI hardware (bus 00)
[ 19.268144] PCI quirk: region 4000-407f claimed by vt8235 PM
[ 19.268147] PCI quirk: region 5000-500f claimed by vt8235 SMB
[ 19.268430] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 19.281241] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 19.281386] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 6 7 10 11 12)
[ 19.281555] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 19.281704] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
[ 19.281829] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 19.281949] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 19.282069] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 19.282189] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 19.282354] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 19.282511] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 19.282686] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 19.282843] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
[ 19.283117] ACPI: Power Resource [PFAN] (on)
[ 19.283125] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.283137] pnp: PnP ACPI init
[ 19.283150] ACPI: bus type pnp registered
[ 19.285778] pnp: PnP ACPI: found 13 devices
[ 19.285781] ACPI: ACPI bus type pnp unregistered
[ 19.285785] PnPBIOS: Disabled by ACPI PNP
[ 19.285841] PCI: Using ACPI for IRQ routing
[ 19.285844] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.305866] NET: Registered protocol family 8
[ 19.305869] NET: Registered protocol family 20
[ 19.305939] pnp: 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 19.305942] pnp: 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 19.305945] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 19.305948] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 19.305954] pnp: 00:02: ioport range 0x4000-0x407f has been reserved
[ 19.305957] pnp: 00:02: ioport range 0x5000-0x500f has been reserved
[ 19.309462] Time: tsc clocksource has been installed.
[ 19.336243] PCI: Bridge: 0000:00:01.0
[ 19.336246] IO window: c000-cfff
[ 19.336251] MEM window: e8000000-e9ffffff
[ 19.336255] PREFETCH window: d8000000-e7ffffff
[ 19.336271] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 19.336284] NET: Registered protocol family 2
[ 19.373435] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 19.373685] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 19.376616] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 19.377592] TCP: Hash tables configured (established 131072 bind 65536)
[ 19.377596] TCP reno registered
[ 19.389503] checking if image is initramfs... it is
[ 19.836651] Switched to high resolution mode on CPU 0
[ 20.026629] Freeing initrd memory: 7351k freed
[ 20.027130] audit: initializing netlink socket (disabled)
[ 20.027147] audit(1194006070.040:1): initialized
[ 20.027227] highmem bounce pool size: 64 pages
[ 20.029200] VFS: Disk quotas dquot_6.5.1
[ 20.029257] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.029373] io scheduler noop registered
[ 20.029375] io scheduler anticipatory registered
[ 20.029378] io scheduler deadline registered
[ 20.029392] io scheduler cfq registered (default)
[ 20.029405] PCI: VIA PCI bridge detected. Disabling DAC.
[ 20.029459] Boot video device is 0000:01:00.0
[ 20.029633] isapnp: Scanning for PnP cards...
[ 20.382901] isapnp: No Plug & Play device found
[ 20.409321] Real Time Clock Driver v1.12ac
[ 20.409452] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 20.409551] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.410181] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.410948] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 20.411206] input: Macintosh mouse button emulation as /class/input/input0
[ 20.411289] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 20.411706] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.411712] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.411890] mice: PS/2 mouse device common for all mice
[ 20.412001] EISA: Probing bus 0 at eisa.0
[ 20.412022] Cannot allocate resource for EISA slot 4
[ 20.412024] Cannot allocate resource for EISA slot 5
[ 20.412037] EISA: Detected 0 cards.
[ 20.412252] TCP cubic registered
[ 20.412263] NET: Registered protocol family 1
[ 20.412283] Using IPI No-Shortcut mode
[ 20.412459] Magic number: 15:274:379
[ 20.413191] Freeing unused kernel memory: 364k freed
[ 20.459605] input: AT Translated Set 2 keyboard as /class/input/input1
[ 21.623216] AppArmor: AppArmor initialized<5>audit(1194006071.540:2): type=1505 info="AppArmor initialized" pid=1187
[ 21.629972] fuse init (API version 7.8)
[ 21.634910] Failure registering capabilities with primary security module.
[ 21.645619] ACPI: Fan [FAN] (on)
[ 21.650062] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 21.652708] ACPI: Thermal Zone [THRM] (59 C)
[ 22.197935] usbcore: registered new interface driver usbfs
[ 22.197967] usbcore: registered new interface driver hub
[ 22.197993] usbcore: registered new device driver usb
[ 22.198830] USB Universal Host Controller Interface driver v3.0
[ 22.199273] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 22.199277] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 22.199287] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 22.199303] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 22.199507] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 22.199539] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000d000
[ 22.199697] usb usb1: configuration #1 chosen from 1 choice
[ 22.199735] hub 1-0:1.0: USB hub found
[ 22.199746] hub 1-0:1.0: 2 ports detected
[ 22.287387] SCSI subsystem initialized
[ 22.292606] libata version 2.21 loaded.
[ 22.300639] ACPI: PCI Interrupt 0000:00:10.1[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 22.300658] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 22.300689] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 22.300715] uhci_hcd 0000:00:10.1: irq 16, io base 0x0000d400
[ 22.300838] usb usb2: configuration #1 chosen from 1 choice
[ 22.300882] hub 2-0:1.0: USB hub found
[ 22.300895] hub 2-0:1.0: 2 ports detected
[ 22.320327] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 22.320333] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 22.404422] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 22.404441] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 22.404483] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 22.404508] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000d800
[ 22.404626] usb usb3: configuration #1 chosen from 1 choice
[ 22.404655] hub 3-0:1.0: USB hub found
[ 22.404666] hub 3-0:1.0: 2 ports detected
[ 22.406691] Floppy drive(s): fd0 is 1.44M
[ 22.455311] FDC 0 is a post-1991 82077
[ 22.509231] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 22.509250] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 22.509298] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 22.509351] ehci_hcd 0000:00:10.3: irq 16, io mem 0xea000000
[ 22.509358] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 22.509466] usb usb4: configuration #1 chosen from 1 choice
[ 22.509505] hub 4-0:1.0: USB hub found
[ 22.509516] hub 4-0:1.0: 6 ports detected
[ 3.808000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.812000] Time: acpi_pm clocksource has been installed.
[ 3.852000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 3.852000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.852000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 3.856000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 3.856000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 3.856000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
[ 3.856000] VP_IDE: chipset revision 6
[ 3.856000] VP_IDE: not 100% native mode: will probe irqs later
[ 3.856000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[ 3.856000] ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA
[ 3.856000] ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:pio, hdd:pio
[ 3.856000] Probing IDE interface ide0...
[ 4.272000] hda: ST380011A, ATA DISK drive
[ 4.720000] hdb: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
[ 4.776000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.784000] Probing IDE interface ide1...
[ 4.888000] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 5.048000] usb 2-2: configuration #1 chosen from 1 choice
[ 5.360000] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[ 5.360000] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 5.360000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 5.364000] eth0: VIA Rhine II at 0x1e400, 00:50:8d:54:5d:04, IRQ 18.
[ 5.364000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 5.372000] hda: max request size: 512KiB
[ 5.380000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[ 5.380000] hda: cache flushes supported
[ 5.380000] hda: hda1 hda2 < hda5 >
[ 5.428000] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 5.428000] Uniform CD-ROM driver Revision: 3.20
[ 5.688000] Attempting manual resume
[ 5.688000] swsusp: Resume From Partition 3:5
[ 5.688000] PM: Checking swsusp image.
[ 5.688000] PM: Resume from disk failed.
[ 5.712000] kjournald starting. Commit interval 5 seconds
[ 5.712000] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.576000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.576000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.720000] Linux agpgart interface v0.102 (c) Dave Jones
[ 12.784000] irda_init()
[ 12.784000] NET: Registered protocol family 23
[ 12.844000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 12.848000] agpgart: AGP aperture is 128M @ 0xd0000000
[ 13.764000] Linux video capture interface: v2.00
[ 13.876000] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.44
[ 13.876000] usb 2-2: SN9C103 PC Camera Controller detected (vid:pid 0x0C45:0x60AF)
[ 13.988000] usb 2-2: PAS202BCB image sensor detected
[ 14.204000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[ 14.208000] parport_pc 00:0a: reported by Plug and Play ACPI
[ 14.208000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 14.208000] input: PC Speaker as /class/input/input3
[ 14.228000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 14.228000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 14.228000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 14.228000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 14.540000] usb 2-2: Initialization succeeded
[ 14.540000] usb 2-2: V4L2 device registered as /dev/video0
[ 14.540000] usb 2-2: Optional device control through 'sysfs' interface disabled
[ 14.540000] usbcore: registered new interface driver sn9c102
[ 14.544000] usbcore: registered new interface driver snd-usb-audio
[ 15.808000] lp0: using parport0 (interrupt-driven).
[ 15.860000] Adding 3229024k swap on /dev/hda5. Priority:-1 extents:1 across:3229024k
[ 16.160000] EXT3 FS on hda1, internal journal
demarrage en recovery :
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004fef0000 (usable)
[ 0.000000] BIOS-e820: 000000004fef0000 - 000000004fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000004fef3000 - 000000004ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 382MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5ec0
[ 0.000000] Entering add_active_range(0, 0, 327408) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 327408
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 327408
[ 0.000000] On node 0 totalpages: 327408
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 765 pages used for memmap
[ 0.000000] HighMem zone: 97267 pages, LIFO batch:31
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F78B0 checksum 0
[ 0.000000] ACPI: RSDP 000F78B0, 0014 (r0 KT600 )
[ 0.000000] ACPI: RSDT 4FEF3000, 002C (r1 KT600 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 4FEF3040, 0074 (r1 KT600 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 4FEF30C0, 4908 (r1 KT600 AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 4FEF0000, 0040
[ 0.000000] ACPI: APIC 4FEF7A00, 005A (r1 KT600 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 4ff00000:aed00000)
[ 0.000000] Built 1 zonelists. Total pages: 324851
[ 0.000000] Kernel command line: root=UUID=0529a446-8b79-40ae-beee-268a92ad42c7 ro single
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1936.227 MHz processor.
[ 41.173882] Console: colour VGA+ 80x25
[ 41.176581] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 41.177241] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 41.229460] Memory: 1286200k/1309632k available (2015k kernel code, 22268k reserved, 916k data, 364k init, 392128k highmem)
[ 41.229524] virtual kernel memory layout:
[ 41.229525] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 41.229526] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 41.229528] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 41.229529] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 41.229530] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 41.229532] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 41.229533] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 41.229847] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 41.229976] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 41.309922] Calibrating delay using timer specific routine.. 3876.25 BogoMIPS (lpj=7752519)
[ 41.310040] Security Framework v1.0.0 initialized
[ 41.310090] SELinux: Disabled at boot.
[ 41.310147] Mount-cache hash table entries: 512
[ 41.310371] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 41.310383] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 41.310427] CPU: L2 Cache: 512K (64 bytes/line)
[ 41.310468] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 41.310483] Compat vDSO mapped to ffffe000.
[ 41.310538] Checking 'hlt' instruction... OK.
[ 41.326126] SMP alternatives: switching to UP code
[ 41.326554] Freeing SMP alternatives: 11k freed
[ 41.326990] Early unpacking initramfs... done
[ 41.665173] ACPI: Core revision 20070126
[ 41.665330] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 41.680680] CPU0: AMD Athlon(tm) XP 2600+ stepping 00
[ 41.680807] Total of 1 processors activated (3876.25 BogoMIPS).
[ 41.681596] ENABLING IO-APIC IRQs
[ 41.681940] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 41.829165] Brought up 1 CPUs
[ 41.829379] Booting paravirtualized kernel on bare hardware
[ 41.829503] Time: 12:20:03 Date: 10/02/107
[ 41.829575] NET: Registered protocol family 16
[ 41.829724] EISA bus registered
[ 41.829776] ACPI: bus type pci registered
[ 41.831541] PCI: PCI BIOS revision 2.10 entry at 0xfaf40, last bus=1
[ 41.831583] PCI: Using configuration type 1
[ 41.831622] Setting up standard PCI resources
[ 41.834948] ACPI: EC: Look up EC in DSDT
[ 41.838699] ACPI: Interpreter enabled
[ 41.838740] ACPI: (supports S0 S1 S4 S5)
[ 41.838938] ACPI: Using IOAPIC for interrupt routing
[ 41.844025] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 41.844076] PCI: Probing PCI hardware (bus 00)
[ 41.844386] PCI quirk: region 4000-407f claimed by vt8235 PM
[ 41.844430] PCI quirk: region 5000-500f claimed by vt8235 SMB
[ 41.844753] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 41.857802] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 41.858242] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 6 7 10 11 12)
[ 41.858680] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 41.859120] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
[ 41.859566] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 41.860043] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 41.860521] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 41.860998] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 41.861542] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 41.861853] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 41.862181] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 41.862490] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
[ 41.862916] ACPI: Power Resource [PFAN] (on)
[ 41.862962] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 41.863014] pnp: PnP ACPI init
[ 41.863063] ACPI: bus type pnp registered
[ 41.865676] pnp: PnP ACPI: found 13 devices
[ 41.865717] ACPI: ACPI bus type pnp unregistered
[ 41.865760] PnPBIOS: Disabled by ACPI PNP
[ 41.865859] PCI: Using ACPI for IRQ routing
[ 41.865900] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 41.885961] NET: Registered protocol family 8
[ 41.886001] NET: Registered protocol family 20
[ 41.886108] pnp: 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 41.886153] pnp: 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 41.886197] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 41.886240] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 41.886285] pnp: 00:02: ioport range 0x4000-0x407f has been reserved
[ 41.886328] pnp: 00:02: ioport range 0x5000-0x500f has been reserved
[ 41.889025] Time: tsc clocksource has been installed.
[ 41.916655] PCI: Bridge: 0000:00:01.0
[ 41.916695] IO window: c000-cfff
[ 41.916736] MEM window: e8000000-e9ffffff
[ 41.916778] PREFETCH window: d8000000-e7ffffff
[ 41.916832] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 41.916845] NET: Registered protocol family 2
[ 41.953003] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 41.953301] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 41.956281] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 41.957311] TCP: Hash tables configured (established 131072 bind 65536)
[ 41.957355] TCP reno registered
[ 41.969067] checking if image is initramfs... it is
[ 42.416214] Switched to high resolution mode on CPU 0
[ 42.605836] Freeing initrd memory: 7351k freed
[ 42.606384] audit: initializing netlink socket (disabled)
[ 42.606441] audit(1194006004.048:1): initialized
[ 42.606559] highmem bounce pool size: 64 pages
[ 42.608574] VFS: Disk quotas dquot_6.5.1
[ 42.608670] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 42.608826] io scheduler noop registered
[ 42.608866] io scheduler anticipatory registered
[ 42.608907] io scheduler deadline registered
[ 42.608959] io scheduler cfq registered (default)
[ 42.609010] PCI: VIA PCI bridge detected. Disabling DAC.
[ 42.609103] Boot video device is 0000:01:00.0
[ 42.609278] isapnp: Scanning for PnP cards...
[ 42.962583] isapnp: No Plug & Play device found
[ 42.988574] Real Time Clock Driver v1.12ac
[ 42.988751] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 42.988895] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 42.989597] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 42.990468] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 42.990746] input: Macintosh mouse button emulation as /class/input/input0
[ 42.990872] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 42.992346] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 42.992395] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 42.992659] mice: PS/2 mouse device common for all mice
[ 42.992827] EISA: Probing bus 0 at eisa.0
[ 42.992886] Cannot allocate resource for EISA slot 4
[ 42.992927] Cannot allocate resource for EISA slot 5
[ 42.992979] EISA: Detected 0 cards.
[ 42.993132] TCP cubic registered
[ 42.993179] NET: Registered protocol family 1
[ 42.993241] Using IPI No-Shortcut mode
[ 42.993455] Magic number: 15:721:328
[ 42.994228] Freeing unused kernel memory: 364k freed
[ 43.039158] input: AT Translated Set 2 keyboard as /class/input/input1
[ 43.184977] AppArmor: AppArmor initialized<5>audit(1194006004.548:2): type=1505 info="AppArmor initialized" pid=1166
[ 43.191782] fuse init (API version 7.8)
[ 43.196748] Failure registering capabilities with primary security module.
[ 43.210909] ACPI: Fan [FAN] (on)
[ 43.215400] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 43.218079] ACPI: Thermal Zone [THRM] (58 C)
[ 43.782807] usbcore: registered new interface driver usbfs
[ 43.782883] usbcore: registered new interface driver hub
[ 43.782952] usbcore: registered new device driver usb
[ 43.783823] USB Universal Host Controller Interface driver v3.0
[ 43.784326] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 43.784371] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 43.784420] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 43.784544] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 43.784794] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 43.784873] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000d000
[ 43.785068] usb usb1: configuration #1 chosen from 1 choice
[ 43.785139] hub 1-0:1.0: USB hub found
[ 43.785188] hub 1-0:1.0: 2 ports detected
[ 43.877456] SCSI subsystem initialized
[ 43.882741] libata version 2.21 loaded.
[ 43.885839] ACPI: PCI Interrupt 0000:00:10.1[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 43.885962] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 43.886036] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 43.886108] uhci_hcd 0000:00:10.1: irq 16, io base 0x0000d400
[ 43.886268] usb usb2: configuration #1 chosen from 1 choice
[ 43.886336] hub 2-0:1.0: USB hub found
[ 43.886385] hub 2-0:1.0: 2 ports detected
[ 43.969196] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 43.969248] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 43.989004] Floppy drive(s): fd0 is 1.44M
[ 43.990180] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 43.990297] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 43.990366] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 43.990434] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000d800
[ 43.990607] usb usb3: configuration #1 chosen from 1 choice
[ 43.990681] hub 3-0:1.0: USB hub found
[ 43.990730] hub 3-0:1.0: 2 ports detected
[ 44.038125] FDC 0 is a post-1991 82077
[ 44.094458] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 44.094586] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 44.094671] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 44.094770] ehci_hcd 0000:00:10.3: irq 16, io mem 0xea000000
[ 44.094816] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 44.094977] usb usb4: configuration #1 chosen from 1 choice
[ 44.095047] hub 4-0:1.0: USB hub found
[ 44.095096] hub 4-0:1.0: 6 ports detected
[ 44.203359] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 44.203412] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 44.204136] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 44.204535] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 44.204579] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 44.204629] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
[ 44.204753] VP_IDE: chipset revision 6
[ 44.204792] VP_IDE: not 100% native mode: will probe irqs later
[ 44.204844] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[ 44.204901] ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA
[ 44.205017] ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:pio, hdd:pio
[ 44.205139] Probing IDE interface ide0...
[ 2.896000] Marking TSC unstable due to: possible TSC halt in C2.
[ 2.900000] Time: acpi_pm clocksource has been installed.
[ 3.284000] hda: ST380011A, ATA DISK drive
[ 3.732000] hdb: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
[ 3.788000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.796000] Probing IDE interface ide1...
[ 3.900000] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 4.060000] usb 2-2: configuration #1 chosen from 1 choice
[ 4.372000] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[ 4.372000] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 4.372000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 4.376000] eth0: VIA Rhine II at 0x1e400, 00:50:8d:54:5d:04, IRQ 18.
[ 4.376000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 4.384000] hda: max request size: 512KiB
[ 4.392000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[ 4.396000] hda: cache flushes supported
[ 4.396000] hda: hda1 hda2 < hda5 >
[ 4.436000] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 4.436000] Uniform CD-ROM driver Revision: 3.20
[ 4.644000] Attempting manual resume
[ 4.644000] swsusp: Resume From Partition 3:5
[ 4.644000] PM: Checking swsusp image.
[ 4.644000] PM: Resume from disk failed.
[ 4.688000] kjournald starting. Commit interval 5 seconds
[ 4.688000] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.436000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.456000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.476000] Linux agpgart interface v0.102 (c) Dave Jones
[ 12.640000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 12.648000] agpgart: AGP aperture is 128M @ 0xd0000000
[ 12.716000] irda_init()
[ 12.716000] NET: Registered protocol family 23
[ 13.636000] Linux video capture interface: v2.00
[ 13.740000] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.44
[ 13.744000] usb 2-2: SN9C103 PC Camera Controller detected (vid:pid 0x0C45:0x60AF)
[ 13.828000] usb 2-2: PAS202BCB image sensor detected
[ 13.984000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 13.984000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 13.984000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 13.984000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 14.036000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[ 14.040000] parport_pc 00:0a: reported by Plug and Play ACPI
[ 14.040000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 14.044000] input: PC Speaker as /class/input/input3
[ 14.408000] usb 2-2: Initialization succeeded
[ 14.408000] usb 2-2: V4L2 device registered as /dev/video0
[ 14.408000] usb 2-2: Optional device control through 'sysfs' interface disabled
[ 14.408000] usbcore: registered new interface driver sn9c102
[ 14.412000] usbcore: registered new interface driver snd-usb-audio
[ 15.608000] lp0: using parport0 (interrupt-driven).
[ 15.652000] Adding 3229024k swap on /dev/hda5. Priority:-1 extents:1 across:3229024k
[ 15.952000] EXT3 FS on hda1, internal journal
je tenterais de finir tout à l'heure, mes ouvertures de fichier plante, avant que cela me plante tout je poste
Merci pour votre aide
soane33
Hors ligne
#11 Le 03/11/2007, à 19:39
- soane33
Re : Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
c'est une catastrophe ! non seulement j'inonde de ligne et en plus je n'arrive pas à faire un post en une seule fois, mes plantages se rapproche !
j'ai un mal fou à chercher des infos, le fonctionnement est trop cahotique.
les bras m'en tombent, moi qui croyait être enfin sauvé des galères windowsiennes...
HELPPPP
une petite explication comment mettre texte dans fenêtre deroulante déjà pour commencer
soane33 alias le boulet
Hors ligne
#12 Le 04/11/2007, à 01:31
- soane33
Re : Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
Bricoler dans son coin des trucs que je ne comprends pas c'est un peu lourd, j'ai encore réinstallé ubuntu car à force de manip plantage complet...
Dernière tentative et je repasse sous windows... privée ma belle de sa connexion msn c'est pas humain...
Je pense que j'ai un problème de matériel (reconnu mais pas comme il faut : genre carte réseau) mais le forum ne m'amène que sur des versions qui ne me correspondent pas à croire que mon matériel ne pose pas de problème :
athlon XP2600+
ABIT KD7A
9200SE
si je dis merci tout de suite personne ne répondras ?
Ok je sors... et merci...
soane33
Hors ligne
#13 Le 04/11/2007, à 02:03
- gigil125
Re : Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
bonsoir a tous
desole si je ne suis pas ds la bonne rubrique mais j'ai un petit souci...
en effet (je suis debutant sous linux),j'ai par betise virer qlq chose sous gparted et maintenant j'ai un message du type grub loading please wait... error 22.
plus moyen de demarrer a partir du dd.
je tourne avec le live cd.
je pense que grub a disparu ou plutot je l'ai virer par betise.maintenant y aurait il qlq 1 pour m'aider a restaurer ma connerie.
je me suis documente depuis le site mais je ne trouve rien qui pourrai m'expliquer comment retablir mon grub.
ou le mieux serai de m'expliquer comment formater mon dd depuis le live cd. attention je n'ai pas acces a mon dd puisque je boot sur le cd rom.
voila j'espere que c pas trop du charabia ce que j'ai ecrit et j'espere que qlq va pouvoir m'aider.
merci a+
Hors ligne
#14 Le 04/11/2007, à 02:28
- gigil125
Re : Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
rebonsoir
y a t il qlq 1 pour m'aider?
merci
Hors ligne
#15 Le 04/11/2007, à 17:02
- Newbuntu
Re : Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
bonjour
je suis pas bien malin, mais quand j'ai un problème de grub, pour le restaurer, je suis les indications de Cep: tu trouveras son site en tapant cepcasa sur google; va donc voir http://www.cepcasa.info/parted/recup1.html
il y a dans ce chapitre un point sur Grub
Newbuntu Lubuntu 22.04, Windows10
Acer travelmate 256m, Pentium(R) 3556U @ 1.70GHz
Haswell-ULT Integrated Graphics Controller
Hors ligne
#16 Le 07/11/2007, à 11:40
- foustala
Re : Plantage inopiné help !!! Ubuntu 7.10 sur Athlon
acpi=off n'est pas a écrire dans un terminal mais dans le fichier de configuration de GRUB.
tu peux le faire des le démarrage en t'inspirant de ces instructions.
http://forum.ubuntu-fr.org/viewtopic.php?pid=1122269#p1122269
PS : tu t'es plante pour les balises du message 10. modifie stp.
@gigil125
Essaie de ne pas squatter les sujets des autres surtout quand les problèmes son differents..
Hors ligne