Ubuntu-fr

vieurou

beryl et 2 serveurs X indépendants

bonjour ,
je voudrait activer beryl avec 2 serveurs X indépendants :
jai une machine avec 2 cartes graphiques Nvidia , un ecran sur chaque carte, sous Kubuntu.
Le tout est pour  l'instant bien configuré :
pilote OK
mon xorg.conf :

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    RgbPath         "/usr/lib/X11/rgb"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "LG L1952S"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"
    # HorizSync source: xconfig, VertRefresh source: xconfig
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "CRT-0"
    HorizSync       30.0 - 110.0
    VertRefresh     50.0 - 150.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7950 GX2"
    BusID          "PCI:4:0:0"
EndSection

Section "Device"
    Identifier     "Videocard1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7950 GX2"
    BusID          "PCI:11:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
        Modes      "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Videocard1"
    Monitor        "Monitor1"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
        Modes      "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

mais lorsque je lance beryl-manager ben y se lance pas ... j'ai bien au debut le petit icone qui sautille  mais rien d'autre
si je lance la commande a partir du terminal il me sort :

**************************************************************
* Beryl system compatiblity check                            *
**************************************************************

Detected xserver                                : NVIDIA

Checking Display :0.0 ...

Checking for XComposite extension               : passed (v0.3)
Checking for XDamage extension                  : passed
Checking for RandR extension                    : passed
Checking for XSync extension                    : passed

Checking Screen 0 ...

Checking for GLX_SGIX_fbconfig                  : passed
Checking for GLX_EXT_texture_from_pixmap        : passed
Checking for non power of two texture support   : passed
Checking maximum texture size                   : passed (4096x4096)

Checking Screen 1 ...

Checking for GLX_SGIX_fbconfig                  : passed
Checking for GLX_EXT_texture_from_pixmap        : passed
Checking for non power of two texture support   : passed
Checking maximum texture size                   : passed (4096x4096)

2 screens detected.
Currently we cannot guarantee that Beryl will work correctly with multiple X screens.
Using the --no-context-share command line option can help.
Please report any success to the beryl developer mailing list. The list can be found at lists.beryl-project.org
Relaunching beryl with __GL_YIELD="NOTHING"
**************************************************************
* Beryl system compatiblity check                            *
**************************************************************

Detected xserver                                : NVIDIA

Checking Display :0.0 ...

Checking for XComposite extension               : passed (v0.3)
Checking for XDamage extension                  : passed
Checking for RandR extension                    : passed
Checking for XSync extension                    : passed

Checking Screen 0 ...

Checking for GLX_SGIX_fbconfig                  : passed
Checking for GLX_EXT_texture_from_pixmap        : passed
Checking for non power of two texture support   : passed
Checking maximum texture size                   : passed (4096x4096)

Checking Screen 1 ...

Checking for GLX_SGIX_fbconfig                  : passed
Checking for GLX_EXT_texture_from_pixmap        : passed
Checking for non power of two texture support   : passed
Checking maximum texture size                   : passed (4096x4096)

2 screens detected.
Currently we cannot guarantee that Beryl will work correctly with multiple X screens.
Using the --no-context-share command line option can help.
Please report any success to the beryl developer mailing list. The list can be found at lists.beryl-project.org
Reloading options
beryl: glXCreateContext failed
beryl: Failed to manage screen: 1
Sending reload event...
Reloading options
X connection to :0.0 broken (explicit kill or server shutdown).

là il se lance mais  j'ai j'ai plus de contour de fenetre et mon screen 2 est inutilisable jusqu'a ce que je selectionne le gestionnaire de fenetre Kwin..
une idée???
merci

Dernière modification par vieurou (Le 30/08/2007, à 12:51)

vieurou

Re : beryl et 2 serveurs X indépendants

si quelqu'un a une solution intermediaire, genre beryl sur le screen 1 et kwin sur le 2eme , je suis preneur aussi

vieurou

Re : beryl et 2 serveurs X indépendants

personne n'as de solution , cela marcherai t'il avec compiz fusion ?