Ubuntu-fr

Habeeb

[Résolu] Pb résolution d'écran avec chipset Intel 945GM

Bonjour,

Je viens d'ainstaller Ubuntu-Studio sur mon Acer Aspire 1640 qui equipé d'une carte graphique Intel 945GM, pendant le démarrage le serveur x m'affiche une erreur.

J'ai installé alors  les packages 915resolution mais rien n'y fait ...

Mon xorg.conf :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"oss"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"auto-dev"
	Option		"HorizScrollDelta"	"0"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"stylus"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"eraser"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"cursor"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"Generic Video Card"
	Driver		"vga"
	BusID		"PCI:0:2:0"
EndSection

Section "Monitor"
	Identifier	"à‰cran générique"
	Option		"DPMS"
	HorizSync	28-38
	VertRefresh	43-72
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Generic Video Card"
	Monitor		"à‰cran générique"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"800x600"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"800x600"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"800x600"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"800x600"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"800x600"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"800x600"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus"	"SendCoreEvents"
	InputDevice     "cursor"	"SendCoreEvents"
	InputDevice     "eraser"	"SendCoreEvents"
	InputDevice	"Synaptics Touchpad"
EndSection

Section "DRI"
	Mode	0666
EndSection

Que dois-je faire exactement

Dernière modification par Habeeb (Le 11/09/2007, à 17:55)

---

Rédacteur technique

michel2652

Re : [Résolu] Pb résolution d'écran avec chipset Intel 945GM

Bonjour,

Section "Device"
    Identifier    "Generic Video Card"
    Driver        "vga"                  <----- i810
    BusID        "PCI:0:2:0"
EndSection

A+

nozof

Re : [Résolu] Pb résolution d'écran avec chipset Intel 945GM

je pense que tu devrais rajouter la résolution désirée dans ton xorg :

 SubSection "Display"
        Depth        24
        Modes        "800x600" "0000x0000"
    EndSubSection

Dernière modification par nozof (Le 11/09/2007, à 17:22)

Habeeb

Re : [Résolu] Pb résolution d'écran avec chipset Intel 945GM

Merci à vous, le problème est reglé j'ai changé d'abord le driver dans xorg.conf, puis j'ai changé la résolution et ça fonctionne à merveille !!

Merci encore !!

---

Rédacteur technique