#1 Le 08/09/2007, à 22:08
- dsi0743
Besoin d'aide sur configuration Xorg
Bonjour.
J'ai installé Feisty sur une config :
- AMD Athlon XP 2600+
- CG Radeon 9600 SE
- 1,5 Go RAM
- CM Asus A7N8X Deluxe.
Par défaut les pilotes génériques radeon étaient installés.
Donc la 3D était gérée de façon logicielle et consommait énormément de CPU.
J'ai donc activé les pilotes propriétaires.
La 3D est devenue gérée matériellement, mais j'ai perdu la possibilité d'activer les effets 3D du bureau (sauf à installer AIGLX et autre couche logicielle... mais ça consomme de la CPU).
J'ai malgré tout fait quelques essais et aujourd'hui, je ne suis plus très sûr de la bonne configuration de Xorg.
Je me pose des questions en regardant le contenu de /var/log/Xorg.0.log :
Les (WW) :
dsi0743@pc-parents:~$ cat /var/log/Xorg.0.log | grep WW
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) fglrx: No matching Device section for instance (BusID PCI:3:0:1) found
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(WW) fglrx(0): Option "AccelMethod" is not used
(WW) fglrx(0): Option "AccelDFS" is not used
(WW) fglrx(0): Option "DynamicClocks" is not used
(WW) fglrx(0): Option "GARTSize" is not used
(WW) fglrx(0): Option "AGPMode" is not used
(WW) fglrx(0): Option "AGPFastWrite" is not used
(WW) fglrx(0): Option "AGPSize" is not used
(WW) fglrx(0): Option "BufferSize" is not used
(WW) fglrx(0): Option "EnablePageFlip" is not used
(WW) fglrx(0): Option "ColorTiling" is not used
(WW) fglrx(0): Option "RenderAccel" is not usedLes (EE) :
dsi0743@pc-parents:~$ cat /var/log/Xorg.0.log | grep EE
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacomVoici le contenu de xorg.conf :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "Emulate3Buttons" "false"
Option "Buttons" "7"
Option "ZAxisMapping" "4 5"
Option "ButtonMapping" "1 2 3 6 7"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "B101920"
Option "DPMS"
EndSection
Section "Device"
Identifier "ATI Technologies Inc RV350 AQ [Radeon 9600]"
Driver "fglrx"
Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
Option "AccelDFS" "0"# mettez à 0 si vous avez une carte AGP
Option "mtrr" "on"
Option "DPMS"
Option "DynamicClocks" "on"
Option "GARTSize" "64"
Option "AGPMode" "8"
Option "AGPFastWrite" "true"
Option "AGPSize" "128"
Option "RingSize" "8"
Option "BufferSize" "2"
Option "EnablePageFlip" "true"
Option "EnableDepthMoves" "true"
Option "ColorTiling" "on"
Option "RenderAccel" "true"
Option "DRI" "true"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RV350 AQ [Radeon 9600]"
Monitor "B101920"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "RENDER" "Enable"
Option "Composite" "0"
EndSectionCôté 3D, j'obtiens ceci (avec une CPU <1%) :
dsi0743@pc-parents:~$ glxgears
1252 frames in 5.0 seconds = 250.360 FPS
1081 frames in 5.0 seconds = 216.026 FPS
625 frames in 5.0 seconds = 124.999 FPS
857 frames in 5.0 seconds = 171.398 FPS
1249 frames in 5.0 seconds = 249.799 FPS
1100 frames in 5.0 seconds = 219.824 FPSEn revanche, fgl_glxgears consomme 98% de CPU et donne :
dsi0743@pc-parents:~$ fgl_glxgears
Using GLX_SGIX_pbuffer
1182 frames in 5.0 seconds = 236.400 FPS
1062 frames in 5.0 seconds = 212.400 FPS
1046 frames in 5.0 seconds = 209.200 FPS
1064 frames in 5.0 seconds = 212.800 FPS
1053 frames in 5.0 seconds = 210.600 FPS
1051 frames in 5.0 seconds = 210.200 FPSDernière info :
dsi0743@pc-parents:~$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
GLX_ATI_pixel_format_float, GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_multisample
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600SE
OpenGL version string: 2.0.6334 (8.34.8)
OpenGL extensions:
GL_ARB_multitexture, GL_EXT_texture_env_add, GL_EXT_compiled_vertex_array,
GL_S3_s3tc, GL_ARB_depth_texture, GL_ARB_fragment_program,
GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader,
GL_ARB_multisample, GL_ARB_occlusion_query, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_shader_objects, GL_ARB_shading_language_100,
GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_float, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_blend,
GL_ARB_vertex_buffer_object, GL_ARB_pixel_buffer_object,
GL_ARB_vertex_program, GL_ARB_vertex_shader, GL_ARB_window_pos,
GL_ARB_draw_buffers, GL_ATI_draw_buffers, GL_ATI_element_array,
GL_ATI_envmap_bumpmap, GL_ATI_fragment_shader, GL_ATI_map_object_buffer,
GL_ATI_separate_stencil, GL_ATI_texture_env_combine3,
GL_ATI_texture_float, GL_ATI_texture_mirror_once,
GL_ATI_vertex_array_object, GL_ATI_vertex_attrib_array_object,
GL_ATI_vertex_streams, GL_ATIX_texture_env_combine3,
GL_ATIX_texture_env_route, GL_ATIX_vertex_shader_output_point_size,
GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_func_separate,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_framebuffer_object,
GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap,
GL_EXT_texgen_reflection, GL_EXT_texture3D,
GL_EXT_texture_compression_s3tc, GL_EXT_texture_cube_map,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
GL_EXT_vertex_shader, GL_HP_occlusion_test, GL_NV_blend_square,
GL_NV_occlusion_query, GL_NV_texgen_reflection, GL_SGI_color_matrix,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x24 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x27 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x28 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x29 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x2a 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x2b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x2c 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x2d 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x2e 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x2f 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x30 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x31 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x32 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x33 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x34 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x35 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x36 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x37 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x38 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x39 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x3a 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x3b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x3c 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x3d 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x3e 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x3f 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x40 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x41 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x42 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x43 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x44 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x45 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x46 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x47 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x48 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x49 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x4a 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x4b 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x4c 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x4d 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x4e 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x4f 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x50 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x51 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x52 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x53 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x54 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x55 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x56 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x57 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x58 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x59 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x5a 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x5b 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x5c 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 None
0x5d 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x5e 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 None
0x5f 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x60 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x61 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x62 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 NoneLe seul autre dysfonctionnement rencontré, c'est un écran noir qui m'oblige à éteindre l'ordinateur si je tente de changer d'utilisateur... mais il semble que ce soit sû à l'activation de la 3D matérielle avec les pilotes propriétaires.
La seule chose que je n'ai pas tenté, c'est l'installation des pilotes ATI du site AMD.
Cela apporte-t-il quelquechose ?
Merci pour toute aide.
Athlon XP2600+ 1,5 Go ram CG NVIDIA Geforce 6800 GT
Ubuntu 10.10 - Vista SP2
Hors ligne
#2 Le 08/09/2007, à 22:55
- jerome76
Re : Besoin d'aide sur configuration Xorg
pour information, pas effet 3D avec lmes pilotes ATI propriétaire,
cela est du a une incompatibilité avec compiz et béril....
pour l'ecran noir , je ne peut rien dire car j'ai jamais eu ce bug la en utilisant les pilotes propriétaire.
Hors ligne
#3 Le 08/09/2007, à 23:14
- dsi0743
Re : Besoin d'aide sur configuration Xorg
Oui. Pour les effets 3D, je me suis fait une raison avec ma carte ATI.
C'est soit les pilotes libres... et les effets 3D du bureau et la 3D qui consomme un max de CPU, soit les pilotes proprio, la 3D qui consomme très peu... mais pas d'effet de bureau.
Athlon XP2600+ 1,5 Go ram CG NVIDIA Geforce 6800 GT
Ubuntu 10.10 - Vista SP2
Hors ligne
#4 Le 08/09/2007, à 23:22
- jerome76
Re : Besoin d'aide sur configuration Xorg
j'ai entendu dire que cela devrai s'arranger vers novembre ..... a verifier ..
Hors ligne
#5 Le 08/09/2007, à 23:32
- dsi0743
Re : Besoin d'aide sur configuration Xorg
Espérons ;-)
quelqu'un peut-il me dire ce qu'il pense des Warnings et Erreurs dans /var/log/Xorg.0.log ?
Merci
Athlon XP2600+ 1,5 Go ram CG NVIDIA Geforce 6800 GT
Ubuntu 10.10 - Vista SP2
Hors ligne