Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 13/11/2012, à 22:09

sabnac

Point d'accès wifi et freeradius

Bonjour,

Je souhaiterais mettre en place un serveur d'authentification freeradius pour mon point d'accès wifi.

J'ai donc installer les paquets nécessaires puis j'ai ajouter dans /etc/freeradius/users la ligne suivante:

remy SHA-Password := a94a8fe5ccb19ba61c4c0873d391e987982fbbd3

Puis dans le clients.conf:

client 192.168.2.10/24 {
        nastype = RalinkAP0
        secret  = secret
        shortname = remywifi
}

La commande radtest me retourne que tout est ok:

radtest remy test 127.0.0.1 1812 testing123

Sending Access-Request of id 231 to 127.0.0.1 port 1812
	User-Name = "remy"
	User-Password = "test"
	NAS-IP-Address = 127.0.1.1
	NAS-Port = 1812
	Message-Authenticator = 0x00000000000000000000000000000000
rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=231, length=20

En revanche lorsque je configure mon point d'accès utiliser le radius cela ne fonctionne pas.

Voici le debug freeradius:

 ad_recv: Access-Request packet from host 192.168.2.10 port 3078, id=21, length=128
        User-Name = "remy"
        NAS-IP-Address = 192.168.2.10
        NAS-Identifier = "RalinkAP0"
        NAS-Port = 0
        Called-Station-Id = "00-14-D1-9D-0F-10"
        Calling-Station-Id = "A0-0B-BA-D6-63-BE"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x020100090172656d79
        Message-Authenticator = 0xed6c9f9eeed4ff6cbf759856d085fe60
Tue Nov 13 21:28:49 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Tue Nov 13 21:28:49 2012 : Info: +- entering group authorize {...}
Tue Nov 13 21:28:49 2012 : Info: ++[preprocess] returns ok
Tue Nov 13 21:28:49 2012 : Info: ++[chap] returns noop
Tue Nov 13 21:28:49 2012 : Info: ++[mschap] returns noop
Tue Nov 13 21:28:49 2012 : Info: ++[digest] returns noop
Tue Nov 13 21:28:49 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Tue Nov 13 21:28:49 2012 : Info: [suffix] No such realm "NULL"
Tue Nov 13 21:28:49 2012 : Info: ++[suffix] returns noop
Tue Nov 13 21:28:49 2012 : Info: [eap] EAP packet type response id 1 length 9
Tue Nov 13 21:28:49 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation
Tue Nov 13 21:28:49 2012 : Info: ++[eap] returns updated
Tue Nov 13 21:28:49 2012 : Info: [files] users: Matched entry remy at line 204
Tue Nov 13 21:28:49 2012 : Info: ++[files] returns ok
Tue Nov 13 21:28:49 2012 : Info: ++[expiration] returns noop
Tue Nov 13 21:28:49 2012 : Info: ++[logintime] returns noop
Tue Nov 13 21:28:49 2012 : Info: [pap] Normalizing SHA-Password from hex encoding
Tue Nov 13 21:28:49 2012 : Info: [pap] WARNING: Auth-Type already set.  Not setting to PAP
Tue Nov 13 21:28:49 2012 : Info: ++[pap] returns noop
Tue Nov 13 21:28:49 2012 : Info: Found Auth-Type = EAP
Tue Nov 13 21:28:49 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Tue Nov 13 21:28:49 2012 : Info: +- entering group authenticate {...}
Tue Nov 13 21:28:49 2012 : Info: [eap] EAP Identity
Tue Nov 13 21:28:49 2012 : Info: [eap] processing type md5
Tue Nov 13 21:28:49 2012 : Debug: rlm_eap_md5: Issuing Challenge
Tue Nov 13 21:28:49 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 21 to 192.168.2.10 port 3078
EAP-Message = 0x0102001604104d654128c6883c6da55980f99fc6a9e6
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0e8522fc0e8726563d5a93f4e4c110fa
Tue Nov 13 21:28:49 2012 : Info: Finished request 0.
Tue Nov 13 21:28:49 2012 : Debug: Going to the next request
Tue Nov 13 21:28:49 2012 : Debug: Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3078, id=22, length=143
        User-Name = "remy"
        NAS-IP-Address = 192.168.2.10
        NAS-Identifier = "RalinkAP0"
        NAS-Port = 0
        Called-Station-Id = "00-14-D1-9D-0F-10"
        Calling-Station-Id = "A0-0B-BA-D6-63-BE"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x020200060319
        State = 0x0e8522fc0e8726563d5a93f4e4c110fa
        Message-Authenticator = 0x1630d1f93aef3123de4e2b3124cb7502
Tue Nov 13 21:28:49 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Tue Nov 13 21:28:49 2012 : Info: +- entering group authorize {...}
Tue Nov 13 21:28:49 2012 : Info: ++[preprocess] returns ok
Tue Nov 13 21:28:49 2012 : Info: ++[chap] returns noop
Tue Nov 13 21:28:49 2012 : Info: ++[mschap] returns noop
Tue Nov 13 21:28:49 2012 : Info: ++[digest] returns noop
Tue Nov 13 21:28:49 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Tue Nov 13 21:28:49 2012 : Info: [suffix] No such realm "NULL"
Tue Nov 13 21:28:49 2012 : Info: ++[suffix] returns noop
Tue Nov 13 21:28:49 2012 : Info: [eap] EAP packet type response id 2 length 6
Tue Nov 13 21:28:49 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation
Tue Nov 13 21:28:49 2012 : Info: ++[eap] returns updated
Tue Nov 13 21:28:49 2012 : Info: [files] users: Matched entry remy at line 204
Tue Nov 13 21:28:49 2012 : Info: ++[files] returns ok
Tue Nov 13 21:28:49 2012 : Info: ++[expiration] returns noop
Tue Nov 13 21:28:49 2012 : Info: ++[logintime] returns noop
Tue Nov 13 21:28:49 2012 : Info: [pap] Normalizing SHA-Password from hex encoding
Tue Nov 13 21:28:49 2012 : Info: [pap] WARNING: Auth-Type already set.  Not setting to PAP
Tue Nov 13 21:28:49 2012 : Info: ++[pap] returns noop
Tue Nov 13 21:28:49 2012 : Info: Found Auth-Type = EAP
Tue Nov 13 21:28:49 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Tue Nov 13 21:28:49 2012 : Info: +- entering group authenticate {...}
Tue Nov 13 21:28:49 2012 : Info: [eap] Request found, released from the list
Tue Nov 13 21:28:49 2012 : Info: [eap] EAP NAK
Tue Nov 13 21:28:49 2012 : Info: [eap] EAP-NAK asked for EAP-Type/peap
Tue Nov 13 21:28:49 2012 : Info: [eap] processing type tls
Tue Nov 13 21:28:49 2012 : Info: [tls] Initiate
Tue Nov 13 21:28:49 2012 : Info: [tls] Start returned 1
Tue Nov 13 21:28:49 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 22 to 192.168.2.10 port 3078
        EAP-Message = 0x010300061920
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0e8522fc0f863b563d5a93f4e4c110fa
Tue Nov 13 21:28:49 2012 : Info: Finished request 1.
Tue Nov 13 21:28:49 2012 : Debug: Going to the next request
Tue Nov 13 21:28:49 2012 : Debug: Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3078, id=23, length=345
        User-Name = "remy"
        NAS-IP-Address = 192.168.2.10
        NAS-Identifier = "RalinkAP0"
        NAS-Port = 0
        Called-Station-Id = "00-14-D1-9D-0F-10"
        Calling-Station-Id = "A0-0B-BA-D6-63-BE"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x020300d01980000000c616030100c1010000bd030150a2ad8063bad16155435c6591c1a3d9ffe5d44f7aff95cec58156ceb91bb816000054c014c00ac022c02100390038c00fc0050035c012c008c01cc01b00160013c00dc003000ac013c009c01fc01e00330032c00ec004002fc011c007c00cc002000500040015001200090014001100080006000300ff01000040000b000403000102000a00340032000e000d0019000b000c00180009000a00160017000800060007001400150004000500120013000100020003000f00100011
        State = 0x0e8522fc0f863b563d5a93f4e4c110fa
        Message-Authenticator = 0xe9f9a891ccd87126a9e2f238c90e24b6
Tue Nov 13 21:28:49 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Tue Nov 13 21:28:49 2012 : Info: +- entering group authorize {...}
Tue Nov 13 21:28:49 2012 : Info: ++[preprocess] returns ok
Tue Nov 13 21:28:49 2012 : Info: ++[chap] returns noop
Tue Nov 13 21:28:49 2012 : Info: ++[mschap] returns noop
Tue Nov 13 21:28:49 2012 : Info: ++[digest] returns noop
Tue Nov 13 21:28:49 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Tue Nov 13 21:28:49 2012 : Info: [suffix] No such realm "NULL"
Tue Nov 13 21:28:49 2012 : Info: ++[suffix] returns noop
Tue Nov 13 21:28:49 2012 : Info: [eap] EAP packet type response id 3 length 208
Tue Nov 13 21:28:49 2012 : Info: [eap] Continuing tunnel setup.
Tue Nov 13 21:28:49 2012 : Info: ++[eap] returns ok
Tue Nov 13 21:28:49 2012 : Info: Found Auth-Type = EAP
Tue Nov 13 21:28:49 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Tue Nov 13 21:28:49 2012 : Info: +- entering group authenticate {...}
Tue Nov 13 21:28:49 2012 : Info: [eap] Request found, released from the list
Tue Nov 13 21:28:49 2012 : Info: [eap] EAP/peap
Tue Nov 13 21:28:49 2012 : Info: [eap] processing type peap
Tue Nov 13 21:28:49 2012 : Info: [peap] processing EAP-TLS
Tue Nov 13 21:28:49 2012 : Debug:   TLS Length 198
Tue Nov 13 21:28:49 2012 : Info: [peap] Length Included
Tue Nov 13 21:28:49 2012 : Info: [peap] eaptls_verify returned 11 
Tue Nov 13 21:28:49 2012 : Info: [peap]     (other): before/accept initialization
Tue Nov 13 21:28:49 2012 : Info: [peap]     TLS_accept: before/accept initialization
Tue Nov 13 21:28:49 2012 : Info: [peap] <<< TLS 1.0 Handshake [length 00c1], ClientHello  
Tue Nov 13 21:28:49 2012 : Info: [peap]     TLS_accept: SSLv3 read client hello A
Tue Nov 13 21:28:49 2012 : Info: [peap] >>> TLS 1.0 Handshake [length 0039], ServerHello  
Tue Nov 13 21:28:49 2012 : Info: [peap]     TLS_accept: SSLv3 write server hello A
Tue Nov 13 21:28:49 2012 : Info: [peap] >>> TLS 1.0 Handshake [length 02ca], Certificate  
Tue Nov 13 21:28:49 2012 : Info: [peap]     TLS_accept: SSLv3 write certificate A
Tue Nov 13 21:28:49 2012 : Info: [peap] >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange  
Tue Nov 13 21:28:49 2012 : Info: [peap]     TLS_accept: SSLv3 write key exchange A
Tue Nov 13 21:28:49 2012 : Info: [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone  
Tue Nov 13 21:28:49 2012 : Info: [peap]     TLS_accept: SSLv3 write server done A
Tue Nov 13 21:28:49 2012 : Info: [peap]     TLS_accept: SSLv3 flush data
Tue Nov 13 21:28:49 2012 : Info: [peap]     TLS_accept: Need to read more data: SSLv3 read client certificate A
Tue Nov 13 21:28:49 2012 : Debug: In SSL Handshake Phase 
Tue Nov 13 21:28:49 2012 : Debug: In SSL Accept mode  
Tue Nov 13 21:28:49 2012 : Info: [peap] eaptls_process returned 13 
Tue Nov 13 21:28:49 2012 : Info: [peap] EAPTLS_HANDLED
Tue Nov 13 21:28:49 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 23 to 192.168.2.10 port 3078
        EAP-Message = 0x0104040019c000000466160301003902000035030150a2ad811dcfbabd891230bdda55cd54851dbfc10fa898bbe6d411e2b43f324f00c01400000dff01000100000b00040300010216030102ca0b0002c60002c30002c0308202bc308201a4a003020102020900949b3689e1037e9c300d06092a864886f70d01010505003016311430120603550403130b7261737062657272797069301e170d3132313131323231323530345a170d3232313131303231323530345a3016311430120603550403130b726173706265727279706930820122300d06092a864886f70d01010105000382010f003082010a0282010100dc:
EAP-Message = 0xfa81586d63ea36f1eae162bf1b77529341b440ccd7e90a260332bf3eeec4bebe6ab7718703c46eaccd759b9cd459d63f511da72547e98cdc6a90ac60cff07843e559b9b1bee160ebdd1aaabf1b6d400ae1f6920a4bfe7316f73943a721b9d458f005977b2138d752572f35830f43981584a6985a10628148183cd5a866e1df07df4516a548135ee56e9c3c0ad046d6c78452cb07177e8e88566fc0452c24c8eb4f777eb4836465df48391802aa17393f67dc906a0df4012b55906256b507f07536fcba2227cf5f7f74ca369eecbeb99c2aadd0457b3f4a9152d5fd6b9ddc48237c00f44d31b397a9271c03ceb48df873dc810203010001a30d300b3009
        EAP-Message = 0x0603551d1304023000300d06092a864886f70d010105050003820101002342eb822166e5f1aa0ac4529c18a463f8ec3202e42a20ace218ae6b1b09a00adde2fa8207224a45f153fab75efcfe008560049c17495372321d0bf1519c408ce060fe6cf8a49234c7b95a30f1dc39f0caf0e5038b3242cce12429976483940b33b4d774e324c12327cf4523801b4cfea8fcd75bc4d4a117c47a974c146886465dfba0895a374ee6f43cfbd2a59f78e97c8baf9b1f1e0e66ade3d1baf41b1bc267d885aa931021c93ce4dbb3f5ef16cd9629daeaa3dc074cda5ea574d740c8d027882f0d70a3d03a8ae71a25236cabd89ef28a452ca1367c9402b233da7d4164
        EAP-Message = 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
        EAP-Message = 0x8e2a434ef6469cb7d8298f38
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0e8522fc0c813b563d5a93f4e4c110fa
Tue Nov 13 21:28:49 2012 : Info: Finished request 2.
Tue Nov 13 21:28:49 2012 : Debug: Going to the next request
Tue Nov 13 21:28:49 2012 : Debug: Waking up in 4.7 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3078, id=24, length=143
        User-Name = "remy"
        NAS-IP-Address = 192.168.2.10
        NAS-Identifier = "RalinkAP0"
        NAS-Port = 0
        Called-Station-Id = "00-14-D1-9D-0F-10"
        Calling-Station-Id = "A0-0B-BA-D6-63-BE"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x020400061900
        State = 0x0e8522fc0c813b563d5a93f4e4c110fa
        Message-Authenticator = 0x3511841cac883e912300b30a26a99048
Tue Nov 13 21:28:49 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Tue Nov 13 21:28:49 2012 : Info: +- entering group authorize {...}
Tue Nov 13 21:28:49 2012 : Info: ++[preprocess] returns ok
Tue Nov 13 21:28:49 2012 : Info: ++[chap] returns noop
Tue Nov 13 21:28:49 2012 : Info: ++[mschap] returns noop
Tue Nov 13 21:28:49 2012 : Info: ++[digest] returns noop
Tue Nov 13 21:28:49 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Tue Nov 13 21:28:49 2012 : Info: [suffix] No such realm "NULL"
Tue Nov 13 21:28:49 2012 : Info: ++[suffix] returns noop
Tue Nov 13 21:28:49 2012 : Info: [eap] EAP packet type response id 4 length 6
Tue Nov 13 21:28:49 2012 : Info: [eap] Continuing tunnel setup.
Tue Nov 13 21:28:49 2012 : Info: ++[eap] returns ok
Tue Nov 13 21:28:49 2012 : Info: Found Auth-Type = EAP
Tue Nov 13 21:28:49 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Tue Nov 13 21:28:49 2012 : Info: +- entering group authenticate {...}
Tue Nov 13 21:28:49 2012 : Info: [eap] Request found, released from the list
Tue Nov 13 21:28:49 2012 : Info: [eap] EAP/peap
Tue Nov 13 21:28:49 2012 : Info: [eap] processing type peap
Tue Nov 13 21:28:49 2012 : Info: [peap] processing EAP-TLS
Tue Nov 13 21:28:49 2012 : Info: [peap] Received TLS ACK
Tue Nov 13 21:28:49 2012 : Info: [peap] ACK handshake fragment handler
Tue Nov 13 21:28:49 2012 : Info: [peap] eaptls_verify returned 1 
Tue Nov 13 21:28:49 2012 : Info: [peap] eaptls_process returned 13 
Tue Nov 13 21:28:49 2012 : Info: [peap] EAPTLS_HANDLED
Tue Nov 13 21:28:49 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 24 to 192.168.2.10 port 3078
        EAP-Message = 0x0105007619007806a18f441b7612cf21ed517a5336987da3d4b5f2637ac9dd80e0bdbef8a532415c008eabf1cd1bc39cdfa60e32fcfee4ebf3e664e2b3c67bdcf231386f529a50339bdc35140a57879233d8b808401eec2d6bf478eef23b1924b84188a7c2fb70876d2524385e16030100040e000000
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0e8522fc0d803b563d5a93f4e4c110fa
Tue Nov 13 21:28:49 2012 : Info: Finished request 3.
Tue Nov 13 21:28:49 2012 : Debug: Going to the next request
Tue Nov 13 21:28:49 2012 : Debug: Waking up in 4.7 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3078, id=25, length=281
        User-Name = "remy"
        NAS-IP-Address = 192.168.2.10
        NAS-Identifier = "RalinkAP0"
        NAS-Port = 0
        Called-Station-Id = "00-14-D1-9D-0F-10"
        Calling-Station-Id = "A0-0B-BA-D6-63-BE"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x0205009019800000008616030100461000004241046f28df1a9d85d683cd66c9a0dad408aefd5fd3c07719420d1eb7f0881b34cdfb0319ca34912090ba9c316d99378d1fe3a86a0a6551f84011ccbe6d5e7b7d87541403010001011603010030646f472eeb1e6baf4edb68ed9c3a439ff64a1fbcaaffafba326f763586dbf5bc87656325d54abb93c4e05c2847be0c65
        State = 0x0e8522fc0d803b563d5a93f4e4c110fa
        Message-Authenticator = 0xa751fbc696ec171cfe29cde149bc3447
Tue Nov 13 21:28:49 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Tue Nov 13 21:28:49 2012 : Info: +- entering group authorize {...}
Tue Nov 13 21:28:49 2012 : Info: ++[preprocess] returns ok
Tue Nov 13 21:28:49 2012 : Info: ++[chap] returns noop
Tue Nov 13 21:28:49 2012 : Info: ++[mschap] returns noop
Tue Nov 13 21:28:49 2012 : Info: ++[digest] returns noop
Tue Nov 13 21:28:49 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Tue Nov 13 21:28:49 2012 : Info: [suffix] No such realm "NULL"
Tue Nov 13 21:28:49 2012 : Info: ++[suffix] returns noop
Tue Nov 13 21:28:49 2012 : Info: [eap] EAP packet type response id 5 length 144
Tue Nov 13 21:28:49 2012 : Info: [eap] Continuing tunnel setup.
Tue Nov 13 21:28:49 2012 : Info: ++[eap] returns ok
Tue Nov 13 21:28:49 2012 : Info: Found Auth-Type = EAP
Tue Nov 13 21:28:49 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Tue Nov 13 21:28:49 2012 : Info: +- entering group authenticate {...}
Tue Nov 13 21:28:49 2012 : Info: [eap] Request found, released from the list
Tue Nov 13 21:28:49 2012 : Info: [eap] EAP/peap
Tue Nov 13 21:28:49 2012 : Info: [eap] processing type peap
Tue Nov 13 21:28:49 2012 : Info: [peap] processing EAP-TLS
Tue Nov 13 21:28:49 2012 : Debug:   TLS Length 134
Tue Nov 13 21:28:49 2012 : Info: [peap] Length Included
Tue Nov 13 21:28:49 2012 : Info: [peap] eaptls_verify returned 11 
Tue Nov 13 21:28:49 2012 : Info: [peap] <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange  
Tue Nov 13 21:28:49 2012 : Info: [peap]     TLS_accept: SSLv3 read client key exchange A
Tue Nov 13 21:28:49 2012 : Info: [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001]  
Tue Nov 13 21:28:49 2012 : Info: [peap] <<< TLS 1.0 Handshake [length 0010], Finished  
Tue Nov 13 21:28:49 2012 : Info: [peap]     TLS_accept: SSLv3 read finished A
Tue Nov 13 21:28:49 2012 : Info: [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001]  
Tue Nov 13 21:28:49 2012 : Info: [peap]     TLS_accept: SSLv3 write change cipher spec A
Tue Nov 13 21:28:49 2012 : Info: [peap] >>> TLS 1.0 Handshake [length 0010], Finished  
Tue Nov 13 21:28:49 2012 : Info: [peap]     TLS_accept: SSLv3 write finished A
Tue Nov 13 21:28:49 2012 : Info: [peap]     TLS_accept: SSLv3 flush data
Tue Nov 13 21:28:49 2012 : Info: [peap]     (other): SSL negotiation finished successfully
Tue Nov 13 21:28:49 2012 : Debug: SSL Connection Established 
Tue Nov 13 21:28:49 2012 : Info: [peap] eaptls_process returned 13 
Tue Nov 13 21:28:49 2012 : Info: [peap] EAPTLS_HANDLED
Tue Nov 13 21:28:49 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 25 to 192.168.2.10 port 3078
Sending Access-Challenge of id 25 to 192.168.2.10 port 3078
        EAP-Message = 0x010600411900140301000101160301003048bba0d2eb82a394fbe2aa02a13aa06f56d21c10cd80b38a6e301569d160b636e1816c5bea66960a17c9f801201a3ada
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0e8522fc0a833b563d5a93f4e4c110fa
Tue Nov 13 21:28:49 2012 : Info: Finished request 4.
Tue Nov 13 21:28:49 2012 : Debug: Going to the next request
Tue Nov 13 21:28:49 2012 : Debug: Waking up in 4.6 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3078, id=26, length=143
        User-Name = "remy"
        NAS-IP-Address = 192.168.2.10
        NAS-Identifier = "RalinkAP0"
        NAS-Port = 0
        Called-Station-Id = "00-14-D1-9D-0F-10"
        Calling-Station-Id = "A0-0B-BA-D6-63-BE"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x020600061900
        State = 0x0e8522fc0a833b563d5a93f4e4c110fa
        Message-Authenticator = 0x5ea573aa748f5b931731956ed017365d
Tue Nov 13 21:28:49 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Tue Nov 13 21:28:49 2012 : Info: +- entering group authorize {...}
Tue Nov 13 21:28:49 2012 : Info: ++[preprocess] returns ok
Tue Nov 13 21:28:49 2012 : Info: ++[chap] returns noop
Tue Nov 13 21:28:49 2012 : Info: ++[mschap] returns noop
Tue Nov 13 21:28:49 2012 : Info: ++[digest] returns noop
Tue Nov 13 21:28:49 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Tue Nov 13 21:28:49 2012 : Info: [suffix] No such realm "NULL"
Tue Nov 13 21:28:49 2012 : Info: ++[suffix] returns noop
Tue Nov 13 21:28:49 2012 : Info: [eap] EAP packet type response id 6 length 6
Tue Nov 13 21:28:49 2012 : Info: [eap] Continuing tunnel setup.
Tue Nov 13 21:28:49 2012 : Info: ++[eap] returns ok
Tue Nov 13 21:28:49 2012 : Info: Found Auth-Type = EAP
Tue Nov 13 21:28:49 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Tue Nov 13 21:28:49 2012 : Info: +- entering group authenticate {...}
Tue Nov 13 21:28:49 2012 : Info: [eap] Request found, released from the list
Tue Nov 13 21:28:49 2012 : Info: [eap] EAP/peap
:

Vous auriez une piste?N'hésitez pas si vous avez besoins de plus d'informations.
Merci d'avance.

Hors ligne

#2 Le 14/11/2012, à 20:04

sabnac

Re : Point d'accès wifi et freeradius

Le précedent débug n'état pas bon. Voila le debug complet:

Wed Nov 14 19:05:47 2012 : Info: FreeRADIUS Version 2.1.12, for host arm-unknown-linux-gnueabihf, built on Sep 14 2012 at 22:56:14
Wed Nov 14 19:05:47 2012 : Info: Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. 
Wed Nov 14 19:05:47 2012 : Info: There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A 
Wed Nov 14 19:05:47 2012 : Info: PARTICULAR PURPOSE. 
Wed Nov 14 19:05:47 2012 : Info: You may redistribute copies of FreeRADIUS under the terms of the 
Wed Nov 14 19:05:47 2012 : Info: GNU General Public License v2. 
Wed Nov 14 19:05:47 2012 : Info: Starting - reading configuration files ...
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/radiusd.conf
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/proxy.conf
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/clients.conf
Wed Nov 14 19:05:47 2012 : Debug: including files in directory /etc/freeradius/modules/
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/attr_filter
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/linelog
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/perl
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/otp
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/acct_unique
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/unix
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/wimax
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/dynamic_clients
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/expr
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/sql_log
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/digest
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/detail
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/soh
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/attr_rewrite
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/expiration
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/smsotp
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/pam
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/preprocess
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/rediswho
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/sradutmp
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/detail.log
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/inner-eap
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/krb5
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/ldap
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/always
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/chap
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/detail.example.com
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/files
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/replicate
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/radutmp
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/pap
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/redis
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/realm
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/mac2vlan
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/cui
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/echo
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/etc_group
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/passwd
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/ippool
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/opendirectory
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/policy
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/smbpasswd
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/counter
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/ntlm_auth
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/mac2ip
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/logintime
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/mschap
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/exec
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/modules/checkval
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/eap.conf
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/policy.conf
Wed Nov 14 19:05:47 2012 : Debug: including files in directory /etc/freeradius/sites-enabled/
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/sites-enabled/inner-tunnel
Wed Nov 14 19:05:47 2012 : Debug: including configuration file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:05:47 2012 : Debug: main {
Wed Nov 14 19:05:47 2012 : Debug: 	user = "freerad"
Wed Nov 14 19:05:47 2012 : Debug: 	group = "freerad"
Wed Nov 14 19:05:47 2012 : Debug: 	allow_core_dumps = no
Wed Nov 14 19:05:47 2012 : Debug: }
Wed Nov 14 19:05:47 2012 : Debug: including dictionary file /etc/freeradius/dictionary
Wed Nov 14 19:05:47 2012 : Debug: main {
Wed Nov 14 19:05:47 2012 : Debug: 	name = "freeradius"
Wed Nov 14 19:05:47 2012 : Debug: 	prefix = "/usr"
Wed Nov 14 19:05:47 2012 : Debug: 	localstatedir = "/var"
Wed Nov 14 19:05:47 2012 : Debug: 	sbindir = "/usr/sbin"
Wed Nov 14 19:05:47 2012 : Debug: 	logdir = "/var/log/freeradius"
Wed Nov 14 19:05:47 2012 : Debug: 	run_dir = "/var/run/freeradius"
Wed Nov 14 19:05:47 2012 : Debug: 	libdir = "/usr/lib/freeradius"
Wed Nov 14 19:05:47 2012 : Debug: 	radacctdir = "/var/log/freeradius/radacct"
Wed Nov 14 19:05:47 2012 : Debug: 	hostname_lookups = no
Wed Nov 14 19:05:47 2012 : Debug: 	max_request_time = 30
Wed Nov 14 19:05:47 2012 : Debug: 	cleanup_delay = 5
Wed Nov 14 19:05:47 2012 : Debug: 	max_requests = 1024
Wed Nov 14 19:05:47 2012 : Debug: 	pidfile = "/var/run/freeradius/freeradius.pid"
Wed Nov 14 19:05:47 2012 : Debug: 	checkrad = "/usr/sbin/checkrad"
Wed Nov 14 19:05:47 2012 : Debug: 	debug_level = 0
Wed Nov 14 19:05:47 2012 : Debug: 	proxy_requests = yes
Wed Nov 14 19:05:47 2012 : Debug:  log {
Wed Nov 14 19:05:47 2012 : Debug: 	stripped_names = no
Wed Nov 14 19:05:47 2012 : Debug: 	auth = yes
Wed Nov 14 19:05:47 2012 : Debug: 	auth_badpass = yes
Wed Nov 14 19:05:47 2012 : Debug: 	auth_goodpass = no
Wed Nov 14 19:05:47 2012 : Debug:  }
Wed Nov 14 19:05:47 2012 : Debug:  security {
Wed Nov 14 19:05:47 2012 : Debug: 	max_attributes = 200
Wed Nov 14 19:05:47 2012 : Debug: 	reject_delay = 1
Wed Nov 14 19:05:47 2012 : Debug: 	status_server = yes
Wed Nov 14 19:05:47 2012 : Debug:  }
Wed Nov 14 19:05:47 2012 : Debug: }
Wed Nov 14 19:05:47 2012 : Debug: radiusd: #### Loading Realms and Home Servers ####
Wed Nov 14 19:05:47 2012 : Debug:  proxy server {
Wed Nov 14 19:05:47 2012 : Debug: 	retry_delay = 5
Wed Nov 14 19:05:47 2012 : Debug: 	retry_count = 3
Wed Nov 14 19:05:47 2012 : Debug: 	default_fallback = no
Wed Nov 14 19:05:47 2012 : Debug: 	dead_time = 120
Wed Nov 14 19:05:47 2012 : Debug: 	wake_all_if_all_dead = no
Wed Nov 14 19:05:47 2012 : Debug:  }
Wed Nov 14 19:05:47 2012 : Debug:  home_server localhost {
Wed Nov 14 19:05:47 2012 : Debug: 	ipaddr = 127.0.0.1
Wed Nov 14 19:05:47 2012 : Debug: 	port = 1812
Wed Nov 14 19:05:47 2012 : Debug: 	type = "auth"
Wed Nov 14 19:05:47 2012 : Debug: 	secret = "testing123"
Wed Nov 14 19:05:47 2012 : Debug: 	response_window = 20
Wed Nov 14 19:05:47 2012 : Debug: 	max_outstanding = 65536
Wed Nov 14 19:05:47 2012 : Debug: 	require_message_authenticator = yes
Wed Nov 14 19:05:47 2012 : Debug: 	zombie_period = 40
Wed Nov 14 19:05:47 2012 : Debug: 	status_check = "status-server"
Wed Nov 14 19:05:47 2012 : Debug: 	ping_interval = 30
Wed Nov 14 19:05:47 2012 : Debug: 	check_interval = 30
Wed Nov 14 19:05:47 2012 : Debug: 	num_answers_to_alive = 3
Wed Nov 14 19:05:47 2012 : Debug: 	num_pings_to_alive = 3
Wed Nov 14 19:05:47 2012 : Debug: 	revive_interval = 120
Wed Nov 14 19:05:47 2012 : Debug: 	status_check_timeout = 4
Wed Nov 14 19:05:47 2012 : Debug:   coa {
Wed Nov 14 19:05:47 2012 : Debug: 	irt = 2
Wed Nov 14 19:05:47 2012 : Debug: 	mrt = 16
Wed Nov 14 19:05:47 2012 : Debug: 	mrc = 5
Wed Nov 14 19:05:47 2012 : Debug: 	mrd = 30
Wed Nov 14 19:05:47 2012 : Debug:   }
Wed Nov 14 19:05:47 2012 : Debug:  }
Wed Nov 14 19:05:47 2012 : Debug:  home_server_pool my_auth_failover {
Wed Nov 14 19:05:47 2012 : Debug: 	type = fail-over
Wed Nov 14 19:05:47 2012 : Debug: 	home_server = localhost
Wed Nov 14 19:05:47 2012 : Debug:  }
Wed Nov 14 19:05:47 2012 : Debug:  realm example.com {
Wed Nov 14 19:05:47 2012 : Debug: 	auth_pool = my_auth_failover
Wed Nov 14 19:05:47 2012 : Debug:  }
Wed Nov 14 19:05:47 2012 : Debug:  realm LOCAL {
Wed Nov 14 19:05:47 2012 : Debug:  }
Wed Nov 14 19:05:47 2012 : Debug: radiusd: #### Loading Clients ####
Wed Nov 14 19:05:47 2012 : Debug:  client localhost {
Wed Nov 14 19:05:47 2012 : Debug: 	ipaddr = 127.0.0.1
Wed Nov 14 19:05:47 2012 : Debug: 	require_message_authenticator = no
Wed Nov 14 19:05:47 2012 : Debug: 	secret = "testing123"
Wed Nov 14 19:05:47 2012 : Debug: 	nastype = "other"
Wed Nov 14 19:05:47 2012 : Debug:  }
Wed Nov 14 19:05:47 2012 : Debug:  client 192.168.2.10/24 {
Wed Nov 14 19:05:47 2012 : Debug: 	require_message_authenticator = no
Wed Nov 14 19:05:47 2012 : Debug: 	secret = "secret"
Wed Nov 14 19:05:47 2012 : Debug: 	shortname = "remywifi"
Wed Nov 14 19:05:47 2012 : Debug: 	nastype = "RalinkAP0"
Wed Nov 14 19:05:47 2012 : Debug:  }
Wed Nov 14 19:05:47 2012 : Debug: radiusd: #### Instantiating modules ####
Wed Nov 14 19:05:47 2012 : Debug:  instantiate {
Wed Nov 14 19:05:47 2012 : Debug:     (Loaded rlm_exec, checking if it's valid)
Wed Nov 14 19:05:47 2012 : Debug:  Module: Linked to module rlm_exec
Wed Nov 14 19:05:47 2012 : Debug:  Module: Instantiating module "exec" from file /etc/freeradius/modules/exec
Wed Nov 14 19:05:47 2012 : Debug:   exec {
Wed Nov 14 19:05:47 2012 : Debug: 	wait = no
Wed Nov 14 19:05:47 2012 : Debug: 	input_pairs = "request"
Wed Nov 14 19:05:47 2012 : Debug: 	shell_escape = yes
Wed Nov 14 19:05:47 2012 : Debug:   }
Wed Nov 14 19:05:47 2012 : Debug:     (Loaded rlm_expr, checking if it's valid)
Wed Nov 14 19:05:47 2012 : Debug:  Module: Linked to module rlm_expr
Wed Nov 14 19:05:47 2012 : Debug:  Module: Instantiating module "expr" from file /etc/freeradius/modules/expr
Wed Nov 14 19:05:47 2012 : Debug:     (Loaded rlm_expiration, checking if it's valid)
Wed Nov 14 19:05:47 2012 : Debug:  Module: Linked to module rlm_expiration
Wed Nov 14 19:05:47 2012 : Debug:  Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration
Wed Nov 14 19:05:47 2012 : Debug:   expiration {
Wed Nov 14 19:05:47 2012 : Debug: 	reply-message = "Password Has Expired  "
Wed Nov 14 19:05:47 2012 : Debug:   }
Wed Nov 14 19:05:47 2012 : Debug:     (Loaded rlm_logintime, checking if it's valid)
Wed Nov 14 19:05:47 2012 : Debug:  Module: Linked to module rlm_logintime
Wed Nov 14 19:05:47 2012 : Debug:  Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime
Wed Nov 14 19:05:47 2012 : Debug:   logintime {
Wed Nov 14 19:05:47 2012 : Debug: 	reply-message = "You are calling outside your allowed timespan  "
Wed Nov 14 19:05:47 2012 : Debug: 	minimum-timeout = 60
Wed Nov 14 19:05:47 2012 : Debug:   }
Wed Nov 14 19:05:47 2012 : Debug:  }
Wed Nov 14 19:05:47 2012 : Debug: radiusd: #### Loading Virtual Servers ####
Wed Nov 14 19:05:47 2012 : Debug: server { # from file /etc/freeradius/radiusd.conf
Wed Nov 14 19:05:47 2012 : Debug:  modules {
Wed Nov 14 19:05:47 2012 : Debug:   Module: Creating Auth-Type = digest
Wed Nov 14 19:05:47 2012 : Debug:   Module: Creating Post-Auth-Type = REJECT
Wed Nov 14 19:05:47 2012 : Debug:  Module: Checking authenticate {...} for more modules to load
Wed Nov 14 19:05:47 2012 : Debug:     (Loaded rlm_pap, checking if it's valid)
Wed Nov 14 19:05:47 2012 : Debug:  Module: Linked to module rlm_pap
Wed Nov 14 19:05:47 2012 : Debug:  Module: Instantiating module "pap" from file /etc/freeradius/modules/pap
Wed Nov 14 19:05:47 2012 : Debug:   pap {
Wed Nov 14 19:05:47 2012 : Debug: 	encryption_scheme = "auto"
Wed Nov 14 19:05:47 2012 : Debug: 	auto_header = no
Wed Nov 14 19:05:47 2012 : Debug:   }
Wed Nov 14 19:05:47 2012 : Debug:     (Loaded rlm_chap, checking if it's valid)
Wed Nov 14 19:05:47 2012 : Debug:  Module: Linked to module rlm_chap
Wed Nov 14 19:05:47 2012 : Debug:  Module: Instantiating module "chap" from file /etc/freeradius/modules/chap
Wed Nov 14 19:05:47 2012 : Debug:     (Loaded rlm_mschap, checking if it's valid)
Wed Nov 14 19:05:47 2012 : Debug:  Module: Linked to module rlm_mschap
Wed Nov 14 19:05:47 2012 : Debug:  Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap
Wed Nov 14 19:05:47 2012 : Debug:   mschap {
Wed Nov 14 19:05:47 2012 : Debug: 	use_mppe = yes
Wed Nov 14 19:05:47 2012 : Debug: 	require_encryption = no
Wed Nov 14 19:05:47 2012 : Debug: 	require_strong = no
Wed Nov 14 19:05:47 2012 : Debug: 	with_ntdomain_hack = no
Wed Nov 14 19:05:47 2012 : Debug: 	allow_retry = yes
Wed Nov 14 19:05:47 2012 : Debug:   }
Wed Nov 14 19:05:47 2012 : Debug:     (Loaded rlm_digest, checking if it's valid)
Wed Nov 14 19:05:47 2012 : Debug:  Module: Linked to module rlm_digest
Wed Nov 14 19:05:47 2012 : Debug:  Module: Instantiating module "digest" from file /etc/freeradius/modules/digest
Wed Nov 14 19:05:47 2012 : Debug:     (Loaded rlm_unix, checking if it's valid)
Wed Nov 14 19:05:47 2012 : Debug:  Module: Linked to module rlm_unix
Wed Nov 14 19:05:47 2012 : Debug:  Module: Instantiating module "unix" from file /etc/freeradius/modules/unix
Wed Nov 14 19:05:47 2012 : Debug:   unix {
Wed Nov 14 19:05:47 2012 : Debug: 	radwtmp = "/var/log/freeradius/radwtmp"
Wed Nov 14 19:05:47 2012 : Debug:   }
Wed Nov 14 19:05:47 2012 : Debug:     (Loaded rlm_eap, checking if it's valid)
Wed Nov 14 19:05:47 2012 : Debug:  Module: Linked to module rlm_eap
Wed Nov 14 19:05:47 2012 : Debug:  Module: Instantiating module "eap" from file /etc/freeradius/eap.conf
Wed Nov 14 19:05:47 2012 : Debug:   eap {
Wed Nov 14 19:05:47 2012 : Debug: 	default_eap_type = "md5"
Wed Nov 14 19:05:47 2012 : Debug: 	timer_expire = 60
Wed Nov 14 19:05:47 2012 : Debug: 	ignore_unknown_eap_types = no
Wed Nov 14 19:05:47 2012 : Debug: 	cisco_accounting_username_bug = no
Wed Nov 14 19:05:47 2012 : Debug: 	max_sessions = 4096
Wed Nov 14 19:05:47 2012 : Debug:   }
Wed Nov 14 19:05:47 2012 : Debug:  Module: Linked to sub-module rlm_eap_md5
Wed Nov 14 19:05:47 2012 : Debug:  Module: Instantiating eap-md5
Wed Nov 14 19:05:47 2012 : Debug:  Module: Linked to sub-module rlm_eap_leap
Wed Nov 14 19:05:47 2012 : Debug:  Module: Instantiating eap-leap
Wed Nov 14 19:05:47 2012 : Debug:  Module: Linked to sub-module rlm_eap_gtc
Wed Nov 14 19:05:47 2012 : Debug:  Module: Instantiating eap-gtc
Wed Nov 14 19:05:47 2012 : Debug:    gtc {
Wed Nov 14 19:05:47 2012 : Debug: 	challenge = "Password: "
Wed Nov 14 19:05:47 2012 : Debug: 	auth_type = "PAP"
Wed Nov 14 19:05:47 2012 : Debug:    }
Wed Nov 14 19:05:47 2012 : Debug:  Module: Linked to sub-module rlm_eap_tls
Wed Nov 14 19:05:47 2012 : Debug:  Module: Instantiating eap-tls
Wed Nov 14 19:05:47 2012 : Debug:    tls {
Wed Nov 14 19:05:47 2012 : Debug: 	rsa_key_exchange = no
Wed Nov 14 19:05:47 2012 : Debug: 	dh_key_exchange = yes
Wed Nov 14 19:05:47 2012 : Debug: 	rsa_key_length = 512
Wed Nov 14 19:05:47 2012 : Debug: 	dh_key_length = 512
Wed Nov 14 19:05:47 2012 : Debug: 	verify_depth = 0
Wed Nov 14 19:05:47 2012 : Debug: 	CA_path = "/etc/freeradius/certs"
Wed Nov 14 19:05:47 2012 : Debug: 	pem_file_type = yes
Wed Nov 14 19:05:47 2012 : Debug: 	private_key_file = "/etc/freeradius/certs/server.key"
Wed Nov 14 19:05:47 2012 : Debug: 	certificate_file = "/etc/freeradius/certs/server.pem"
Wed Nov 14 19:05:47 2012 : Debug: 	CA_file = "/etc/freeradius/certs/ca.pem"
Wed Nov 14 19:05:47 2012 : Debug: 	private_key_password = "whatever"
Wed Nov 14 19:05:47 2012 : Debug: 	dh_file = "/etc/freeradius/certs/dh"
Wed Nov 14 19:05:47 2012 : Debug: 	random_file = "/dev/urandom"
Wed Nov 14 19:05:47 2012 : Debug: 	fragment_size = 1024
Wed Nov 14 19:05:47 2012 : Debug: 	include_length = yes
Wed Nov 14 19:05:47 2012 : Debug: 	check_crl = no
Wed Nov 14 19:05:47 2012 : Debug: 	cipher_list = "DEFAULT"
Wed Nov 14 19:05:47 2012 : Debug: 	make_cert_command = "/etc/freeradius/certs/bootstrap"
Wed Nov 14 19:05:47 2012 : Debug: 	ecdh_curve = "prime256v1"
Wed Nov 14 19:05:47 2012 : Debug:     cache {
Wed Nov 14 19:05:47 2012 : Debug: 	enable = no
Wed Nov 14 19:05:47 2012 : Debug: 	lifetime = 24
Wed Nov 14 19:05:47 2012 : Debug: 	max_entries = 255
Wed Nov 14 19:05:47 2012 : Debug:     }
Wed Nov 14 19:05:47 2012 : Debug:     verify {
Wed Nov 14 19:05:47 2012 : Debug:     }
Wed Nov 14 19:05:47 2012 : Debug:     ocsp {
Wed Nov 14 19:05:47 2012 : Debug: 	enable = no
Wed Nov 14 19:05:47 2012 : Debug: 	override_cert_url = yes
Wed Nov 14 19:05:47 2012 : Debug: 	url = "http://127.0.0.1/ocsp/"
Wed Nov 14 19:05:47 2012 : Debug:     }
Wed Nov 14 19:05:47 2012 : Debug:    }
Wed Nov 14 19:05:49 2012 : Debug:  Module: Linked to sub-module rlm_eap_ttls
Wed Nov 14 19:05:50 2012 : Debug:  Module: Instantiating eap-ttls
Wed Nov 14 19:05:50 2012 : Debug:    ttls {
Wed Nov 14 19:05:50 2012 : Debug: 	default_eap_type = "md5"
Wed Nov 14 19:05:50 2012 : Debug: 	copy_request_to_tunnel = no
Wed Nov 14 19:05:50 2012 : Debug: 	use_tunneled_reply = no
Wed Nov 14 19:05:50 2012 : Debug: 	virtual_server = "inner-tunnel"
Wed Nov 14 19:05:50 2012 : Debug: 	include_length = yes
Wed Nov 14 19:05:50 2012 : Debug:    }
Wed Nov 14 19:05:50 2012 : Debug:  Module: Linked to sub-module rlm_eap_peap
Wed Nov 14 19:05:50 2012 : Debug:  Module: Instantiating eap-peap
Wed Nov 14 19:05:50 2012 : Debug:    peap {
Wed Nov 14 19:05:50 2012 : Debug: 	default_eap_type = "mschapv2"
Wed Nov 14 19:05:50 2012 : Debug: 	copy_request_to_tunnel = no
Wed Nov 14 19:05:50 2012 : Debug: 	use_tunneled_reply = no
Wed Nov 14 19:05:50 2012 : Debug: 	proxy_tunneled_request_as_eap = yes
Wed Nov 14 19:05:50 2012 : Debug: 	virtual_server = "inner-tunnel"
Wed Nov 14 19:05:50 2012 : Debug: 	soh = no
Wed Nov 14 19:05:50 2012 : Debug:    }
Wed Nov 14 19:05:50 2012 : Debug:  Module: Linked to sub-module rlm_eap_mschapv2
Wed Nov 14 19:05:50 2012 : Debug:  Module: Instantiating eap-mschapv2
Wed Nov 14 19:05:50 2012 : Debug:    mschapv2 {
Wed Nov 14 19:05:50 2012 : Debug: 	with_ntdomain_hack = no
Wed Nov 14 19:05:50 2012 : Debug: 	send_error = no
Wed Nov 14 19:05:50 2012 : Debug:    }
Wed Nov 14 19:05:50 2012 : Debug:  Module: Checking authorize {...} for more modules to load
Wed Nov 14 19:05:50 2012 : Debug:     (Loaded rlm_preprocess, checking if it's valid)
Wed Nov 14 19:05:50 2012 : Debug:  Module: Linked to module rlm_preprocess
Wed Nov 14 19:05:50 2012 : Debug:  Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess
Wed Nov 14 19:05:50 2012 : Debug:   preprocess {
Wed Nov 14 19:05:50 2012 : Debug: 	huntgroups = "/etc/freeradius/huntgroups"
Wed Nov 14 19:05:50 2012 : Debug: 	hints = "/etc/freeradius/hints"
Wed Nov 14 19:05:50 2012 : Debug: 	with_ascend_hack = no
Wed Nov 14 19:05:50 2012 : Debug: 	ascend_channels_per_line = 23
Wed Nov 14 19:05:50 2012 : Debug: 	with_ntdomain_hack = no
Wed Nov 14 19:05:50 2012 : Debug: 	with_specialix_jetstream_hack = no
Wed Nov 14 19:05:50 2012 : Debug: 	with_cisco_vsa_hack = no
Wed Nov 14 19:05:50 2012 : Debug: 	with_alvarion_vsa_hack = no
Wed Nov 14 19:05:50 2012 : Debug:   }
Wed Nov 14 19:05:50 2012 : Debug:     (Loaded rlm_realm, checking if it's valid)
Wed Nov 14 19:05:50 2012 : Debug:  Module: Linked to module rlm_realm
Wed Nov 14 19:05:50 2012 : Debug:  Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm
Wed Nov 14 19:05:50 2012 : Debug:   realm suffix {
Wed Nov 14 19:05:50 2012 : Debug: 	format = "suffix"
Wed Nov 14 19:05:50 2012 : Debug: 	delimiter = "@"
Wed Nov 14 19:05:50 2012 : Debug: 	ignore_default = no
Wed Nov 14 19:05:50 2012 : Debug: 	ignore_null = no
Wed Nov 14 19:05:50 2012 : Debug:   }
Wed Nov 14 19:05:50 2012 : Debug:     (Loaded rlm_files, checking if it's valid)
Wed Nov 14 19:05:50 2012 : Debug:  Module: Linked to module rlm_files
Wed Nov 14 19:05:50 2012 : Debug:  Module: Instantiating module "files" from file /etc/freeradius/modules/files
Wed Nov 14 19:05:50 2012 : Debug:   files {
Wed Nov 14 19:05:50 2012 : Debug: 	usersfile = "/etc/freeradius/users"
Wed Nov 14 19:05:50 2012 : Debug: 	acctusersfile = "/etc/freeradius/acct_users"
Wed Nov 14 19:05:50 2012 : Debug: 	preproxy_usersfile = "/etc/freeradius/preproxy_users"
Wed Nov 14 19:05:50 2012 : Debug: 	compat = "no"
Wed Nov 14 19:05:50 2012 : Debug:   }
Wed Nov 14 19:05:50 2012 : Debug:  Module: Checking preacct {...} for more modules to load
Wed Nov 14 19:05:50 2012 : Debug:     (Loaded rlm_acct_unique, checking if it's valid)
Wed Nov 14 19:05:50 2012 : Debug:  Module: Linked to module rlm_acct_unique
Wed Nov 14 19:05:50 2012 : Debug:  Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique
Wed Nov 14 19:05:50 2012 : Debug:   acct_unique {
Wed Nov 14 19:05:50 2012 : Debug: 	key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Wed Nov 14 19:05:50 2012 : Debug:   }
Wed Nov 14 19:05:50 2012 : Debug:  Module: Checking accounting {...} for more modules to load
Wed Nov 14 19:05:50 2012 : Debug:     (Loaded rlm_detail, checking if it's valid)
Wed Nov 14 19:05:50 2012 : Debug:  Module: Linked to module rlm_detail
Wed Nov 14 19:05:50 2012 : Debug:  Module: Instantiating module "detail" from file /etc/freeradius/modules/detail
Wed Nov 14 19:05:50 2012 : Debug:   detail {
Wed Nov 14 19:05:50 2012 : Debug: 	detailfile = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
Wed Nov 14 19:05:50 2012 : Debug: 	header = "%t"
Wed Nov 14 19:05:50 2012 : Debug: 	detailperm = 384
Wed Nov 14 19:05:50 2012 : Debug: 	dirperm = 493
Wed Nov 14 19:05:50 2012 : Debug: 	locking = no
Wed Nov 14 19:05:50 2012 : Debug: 	log_packet_header = no
Wed Nov 14 19:05:50 2012 : Debug:   }
Wed Nov 14 19:05:50 2012 : Debug:     (Loaded rlm_radutmp, checking if it's valid)
Wed Nov 14 19:05:50 2012 : Debug:  Module: Linked to module rlm_radutmp
Wed Nov 14 19:05:50 2012 : Debug:  Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp
Wed Nov 14 19:05:50 2012 : Debug:   radutmp {
Wed Nov 14 19:05:50 2012 : Debug: 	filename = "/var/log/freeradius/radutmp"
Wed Nov 14 19:05:50 2012 : Debug: 	username = "%{User-Name}"
Wed Nov 14 19:05:50 2012 : Debug: 	case_sensitive = yes
Wed Nov 14 19:05:50 2012 : Debug: 	check_with_nas = yes
Wed Nov 14 19:05:50 2012 : Debug: 	perm = 384
Wed Nov 14 19:05:50 2012 : Debug: 	callerid = yes
Wed Nov 14 19:05:50 2012 : Debug:   }
Wed Nov 14 19:05:50 2012 : Debug:     (Loaded rlm_attr_filter, checking if it's valid)
Wed Nov 14 19:05:50 2012 : Debug:  Module: Linked to module rlm_attr_filter
Wed Nov 14 19:05:50 2012 : Debug:  Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter
Wed Nov 14 19:05:50 2012 : Debug:   attr_filter attr_filter.accounting_response {
Wed Nov 14 19:05:50 2012 : Debug: 	attrsfile = "/etc/freeradius/attrs.accounting_response"
Wed Nov 14 19:05:50 2012 : Debug: 	key = "%{User-Name}"
Wed Nov 14 19:05:50 2012 : Debug: 	relaxed = no
Wed Nov 14 19:05:50 2012 : Debug:   }
Wed Nov 14 19:05:50 2012 : Debug:  Module: Checking session {...} for more modules to load
Wed Nov 14 19:05:50 2012 : Debug:  Module: Checking post-proxy {...} for more modules to load
Wed Nov 14 19:05:50 2012 : Debug:  Module: Checking post-auth {...} for more modules to load
Wed Nov 14 19:05:50 2012 : Debug:  Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter
Wed Nov 14 19:05:50 2012 : Debug:   attr_filter attr_filter.access_reject {
Wed Nov 14 19:05:50 2012 : Debug: 	attrsfile = "/etc/freeradius/attrs.access_reject"
Wed Nov 14 19:05:50 2012 : Debug: 	key = "%{User-Name}"
Wed Nov 14 19:05:50 2012 : Debug: 	relaxed = no
Wed Nov 14 19:05:50 2012 : Debug:   }
Wed Nov 14 19:05:50 2012 : Debug:  } # modules
Wed Nov 14 19:05:50 2012 : Debug: } # server
Wed Nov 14 19:05:50 2012 : Debug: server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
Wed Nov 14 19:05:50 2012 : Debug:  modules {
Wed Nov 14 19:05:50 2012 : Debug:  Module: Checking authenticate {...} for more modules to load
Wed Nov 14 19:05:50 2012 : Debug:  Module: Checking authorize {...} for more modules to load
Wed Nov 14 19:05:50 2012 : Debug:  Module: Checking session {...} for more modules to load
Wed Nov 14 19:05:50 2012 : Debug:  Module: Checking post-proxy {...} for more modules to load
Wed Nov 14 19:05:50 2012 : Debug:  Module: Checking post-auth {...} for more modules to load
Wed Nov 14 19:05:50 2012 : Debug:  } # modules
Wed Nov 14 19:05:50 2012 : Debug: } # server
Wed Nov 14 19:05:50 2012 : Debug: radiusd: #### Opening IP addresses and Ports ####
Wed Nov 14 19:05:50 2012 : Debug: listen {
Wed Nov 14 19:05:50 2012 : Debug: 	type = "auth"
Wed Nov 14 19:05:50 2012 : Debug: 	ipaddr = *
Wed Nov 14 19:05:50 2012 : Debug: 	port = 0
Wed Nov 14 19:05:50 2012 : Debug: }
Wed Nov 14 19:05:50 2012 : Debug: listen {
Wed Nov 14 19:05:50 2012 : Debug: 	type = "acct"
Wed Nov 14 19:05:50 2012 : Debug: 	ipaddr = *
Wed Nov 14 19:05:50 2012 : Debug: 	port = 0
Wed Nov 14 19:05:50 2012 : Debug: }
Wed Nov 14 19:05:50 2012 : Debug: listen {
Wed Nov 14 19:05:50 2012 : Debug: 	type = "auth"
Wed Nov 14 19:05:50 2012 : Debug: 	ipaddr = 127.0.0.1
Wed Nov 14 19:05:50 2012 : Debug: 	port = 18120
Wed Nov 14 19:05:50 2012 : Debug: }
Wed Nov 14 19:05:50 2012 : Info:  ... adding new socket proxy address * port 47244
Wed Nov 14 19:05:50 2012 : Debug: Listening on authentication address * port 1812
Wed Nov 14 19:05:50 2012 : Debug: Listening on accounting address * port 1813
Wed Nov 14 19:05:50 2012 : Debug: Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel
Wed Nov 14 19:05:50 2012 : Debug: Listening on proxy address * port 1814
Wed Nov 14 19:05:50 2012 : Info: Ready to process requests.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=22, length=128
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020100090172656d79
	Message-Authenticator = 0xe60edddb20d9a70b3b344ea7f8367006
Wed Nov 14 19:07:35 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:35 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:35 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:35 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:35 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:35 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP packet type response id 1 length 9
Wed Nov 14 19:07:35 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns updated
Wed Nov 14 19:07:35 2012 : Info: [files] users: Matched entry remy at line 206
Wed Nov 14 19:07:35 2012 : Info: ++[files] returns ok
Wed Nov 14 19:07:35 2012 : Info: ++[expiration] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[logintime] returns noop
Wed Nov 14 19:07:35 2012 : Info: [pap] Normalizing SHA-Password from hex encoding
Wed Nov 14 19:07:35 2012 : Info: [pap] WARNING: Auth-Type already set.  Not setting to PAP
Wed Nov 14 19:07:35 2012 : Info: ++[pap] returns noop
Wed Nov 14 19:07:35 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:35 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP Identity
Wed Nov 14 19:07:35 2012 : Info: [eap] processing type md5
Wed Nov 14 19:07:35 2012 : Debug: rlm_eap_md5: Issuing Challenge
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 22 to 192.168.2.10 port 3079
	EAP-Message = 0x0102001604108876be2b51bfcdfe09b9746c0ee47f21
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x7d0c82717d0e86642a42e5741cc98360
Wed Nov 14 19:07:35 2012 : Info: Finished request 0.
Wed Nov 14 19:07:35 2012 : Debug: Going to the next request
Wed Nov 14 19:07:35 2012 : Debug: Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=23, length=143
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020200060319
	State = 0x7d0c82717d0e86642a42e5741cc98360
	Message-Authenticator = 0x2702597733d47246dfb2b46aaf894f55
Wed Nov 14 19:07:35 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:35 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:35 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:35 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:35 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:35 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP packet type response id 2 length 6
Wed Nov 14 19:07:35 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns updated
Wed Nov 14 19:07:35 2012 : Info: [files] users: Matched entry remy at line 206
Wed Nov 14 19:07:35 2012 : Info: ++[files] returns ok
Wed Nov 14 19:07:35 2012 : Info: ++[expiration] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[logintime] returns noop
Wed Nov 14 19:07:35 2012 : Info: [pap] Normalizing SHA-Password from hex encoding
Wed Nov 14 19:07:35 2012 : Info: [pap] WARNING: Auth-Type already set.  Not setting to PAP
Wed Nov 14 19:07:35 2012 : Info: ++[pap] returns noop
Wed Nov 14 19:07:35 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:35 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:35 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP NAK
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP-NAK asked for EAP-Type/peap
Wed Nov 14 19:07:35 2012 : Info: [eap] processing type tls
Wed Nov 14 19:07:35 2012 : Info: [tls] Initiate
Wed Nov 14 19:07:35 2012 : Info: [tls] Start returned 1
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 23 to 192.168.2.10 port 3079
	EAP-Message = 0x010300061920
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x7d0c82717c0f9b642a42e5741cc98360
Wed Nov 14 19:07:35 2012 : Info: Finished request 1.
Wed Nov 14 19:07:35 2012 : Debug: Going to the next request
Wed Nov 14 19:07:35 2012 : Debug: Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=24, length=345
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020300d01980000000c616030100c1010000bd030150a3dde64eae1721ba84b0640c553e42d5799121f900c21c1d56e026b3a72048000054c014c00ac022c02100390038c00fc0050035c012c008c01cc01b00160013c00dc003000ac013c009c01fc01e00330032c00ec004002fc011c007c00cc002000500040015001200090014001100080006000300ff01000040000b000403000102000a00340032000e000d0019000b000c00180009000a00160017000800060007001400150004000500120013000100020003000f00100011
	State = 0x7d0c82717c0f9b642a42e5741cc98360
	Message-Authenticator = 0x528230329ebe3904c221def9cde50068
Wed Nov 14 19:07:35 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:35 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:35 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:35 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:35 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:35 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP packet type response id 3 length 208
Wed Nov 14 19:07:35 2012 : Info: [eap] Continuing tunnel setup.
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns ok
Wed Nov 14 19:07:35 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:35 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:35 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP/peap
Wed Nov 14 19:07:35 2012 : Info: [eap] processing type peap
Wed Nov 14 19:07:35 2012 : Info: [peap] processing EAP-TLS
Wed Nov 14 19:07:35 2012 : Debug:   TLS Length 198
Wed Nov 14 19:07:35 2012 : Info: [peap] Length Included
Wed Nov 14 19:07:35 2012 : Info: [peap] eaptls_verify returned 11 
Wed Nov 14 19:07:35 2012 : Info: [peap]     (other): before/accept initialization
Wed Nov 14 19:07:35 2012 : Info: [peap]     TLS_accept: before/accept initialization
Wed Nov 14 19:07:35 2012 : Info: [peap] <<< TLS 1.0 Handshake [length 00c1], ClientHello  
Wed Nov 14 19:07:35 2012 : Info: [peap]     TLS_accept: SSLv3 read client hello A
Wed Nov 14 19:07:35 2012 : Info: [peap] >>> TLS 1.0 Handshake [length 0039], ServerHello  
Wed Nov 14 19:07:35 2012 : Info: [peap]     TLS_accept: SSLv3 write server hello A
Wed Nov 14 19:07:35 2012 : Info: [peap] >>> TLS 1.0 Handshake [length 02ca], Certificate  
Wed Nov 14 19:07:35 2012 : Info: [peap]     TLS_accept: SSLv3 write certificate A
Wed Nov 14 19:07:35 2012 : Info: [peap] >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange  
Wed Nov 14 19:07:35 2012 : Info: [peap]     TLS_accept: SSLv3 write key exchange A
Wed Nov 14 19:07:35 2012 : Info: [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone  
Wed Nov 14 19:07:35 2012 : Info: [peap]     TLS_accept: SSLv3 write server done A
Wed Nov 14 19:07:35 2012 : Info: [peap]     TLS_accept: SSLv3 flush data
Wed Nov 14 19:07:35 2012 : Info: [peap]     TLS_accept: Need to read more data: SSLv3 read client certificate A
Wed Nov 14 19:07:35 2012 : Debug: In SSL Handshake Phase 
Wed Nov 14 19:07:35 2012 : Debug: In SSL Accept mode  
Wed Nov 14 19:07:35 2012 : Info: [peap] eaptls_process returned 13 
Wed Nov 14 19:07:35 2012 : Info: [peap] EAPTLS_HANDLED
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 24 to 192.168.2.10 port 3079
	EAP-Message = 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
	EAP-Message = 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
	EAP-Message = 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
	EAP-Message = 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
	EAP-Message = 0x40f00bf5f2264f0d1a679a50
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x7d0c82717f089b642a42e5741cc98360
Wed Nov 14 19:07:35 2012 : Info: Finished request 2.
Wed Nov 14 19:07:35 2012 : Debug: Going to the next request
Wed Nov 14 19:07:35 2012 : Debug: Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=25, length=143
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020400061900
	State = 0x7d0c82717f089b642a42e5741cc98360
	Message-Authenticator = 0xd879ed3a533e1f5761afd863aaacaad1
Wed Nov 14 19:07:35 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:35 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:35 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:35 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:35 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:35 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP packet type response id 4 length 6
Wed Nov 14 19:07:35 2012 : Info: [eap] Continuing tunnel setup.
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns ok
Wed Nov 14 19:07:35 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:35 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:35 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP/peap
Wed Nov 14 19:07:35 2012 : Info: [eap] processing type peap
Wed Nov 14 19:07:35 2012 : Info: [peap] processing EAP-TLS
Wed Nov 14 19:07:35 2012 : Info: [peap] Received TLS ACK
Wed Nov 14 19:07:35 2012 : Info: [peap] ACK handshake fragment handler
Wed Nov 14 19:07:35 2012 : Info: [peap] eaptls_verify returned 1 
Wed Nov 14 19:07:35 2012 : Info: [peap] eaptls_process returned 13 
Wed Nov 14 19:07:35 2012 : Info: [peap] EAPTLS_HANDLED
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 25 to 192.168.2.10 port 3079
	EAP-Message = 0x0105007619002810c47077535ebc41d46ec85bb5c44735312908ad2e3326048ee10942539f8e6cd6d84353cc1bab475d48b8b4c80eb8613d24825bd310d613a890e5d12da7baece1646234082479ccf2604b70db235f71f43ec690dedc5f09d28a0d3d23787aeaafa9de96a90416030100040e000000
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x7d0c82717e099b642a42e5741cc98360
Wed Nov 14 19:07:35 2012 : Info: Finished request 3.
Wed Nov 14 19:07:35 2012 : Debug: Going to the next request
Wed Nov 14 19:07:35 2012 : Debug: Waking up in 4.7 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=26, length=281
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020500901980000000861603010046100000424104badeaabcb2296cffa2403d47061a9fc7f4c63e47f6daa8d96dad075aa8579c3b15f97f3a07a8a455afc164d9a1b647839a77b3dec113df200c4935a194ba88451403010001011603010030b68abde9e54e49b881bfb038e257888e77e2a74d5df89b650cda0eb88cb3fbc1d2e9dc203d4408eff1220b2e7917cc3f
	State = 0x7d0c82717e099b642a42e5741cc98360
	Message-Authenticator = 0x00c3b6c067b1c2944f9fb5d920e7d097
Wed Nov 14 19:07:35 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:35 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:35 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:35 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:35 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:35 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP packet type response id 5 length 144
Wed Nov 14 19:07:35 2012 : Info: [eap] Continuing tunnel setup.
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns ok
Wed Nov 14 19:07:35 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:35 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:35 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP/peap
Wed Nov 14 19:07:35 2012 : Info: [eap] processing type peap
Wed Nov 14 19:07:35 2012 : Info: [peap] processing EAP-TLS
Wed Nov 14 19:07:35 2012 : Debug:   TLS Length 134
Wed Nov 14 19:07:35 2012 : Info: [peap] Length Included
Wed Nov 14 19:07:35 2012 : Info: [peap] eaptls_verify returned 11 
Wed Nov 14 19:07:35 2012 : Info: [peap] <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange  
Wed Nov 14 19:07:35 2012 : Info: [peap]     TLS_accept: SSLv3 read client key exchange A
Wed Nov 14 19:07:35 2012 : Info: [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001]  
Wed Nov 14 19:07:35 2012 : Info: [peap] <<< TLS 1.0 Handshake [length 0010], Finished  
Wed Nov 14 19:07:35 2012 : Info: [peap]     TLS_accept: SSLv3 read finished A
Wed Nov 14 19:07:35 2012 : Info: [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001]  
Wed Nov 14 19:07:35 2012 : Info: [peap]     TLS_accept: SSLv3 write change cipher spec A
Wed Nov 14 19:07:35 2012 : Info: [peap] >>> TLS 1.0 Handshake [length 0010], Finished  
Wed Nov 14 19:07:35 2012 : Info: [peap]     TLS_accept: SSLv3 write finished A
Wed Nov 14 19:07:35 2012 : Info: [peap]     TLS_accept: SSLv3 flush data
Wed Nov 14 19:07:35 2012 : Info: [peap]     (other): SSL negotiation finished successfully
Wed Nov 14 19:07:35 2012 : Debug: SSL Connection Established 
Wed Nov 14 19:07:35 2012 : Info: [peap] eaptls_process returned 13 
Wed Nov 14 19:07:35 2012 : Info: [peap] EAPTLS_HANDLED
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 26 to 192.168.2.10 port 3079
	EAP-Message = 0x01060041190014030100010116030100303ad99c26b84db2d956a56b71db8b58ea881bd7798e9305ebace55736d3952862d61f57e5b3903f0e1c771377aa25e30f
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x7d0c8271790a9b642a42e5741cc98360
Wed Nov 14 19:07:35 2012 : Info: Finished request 4.
Wed Nov 14 19:07:35 2012 : Debug: Going to the next request
Wed Nov 14 19:07:35 2012 : Debug: Waking up in 4.6 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=27, length=143
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020600061900
	State = 0x7d0c8271790a9b642a42e5741cc98360
	Message-Authenticator = 0x5803c5b6a1ecaccc69c32607ded941f9
Wed Nov 14 19:07:35 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:35 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:35 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:35 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:35 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:35 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP packet type response id 6 length 6
Wed Nov 14 19:07:35 2012 : Info: [eap] Continuing tunnel setup.
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns ok
Wed Nov 14 19:07:35 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:35 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:35 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP/peap
Wed Nov 14 19:07:35 2012 : Info: [eap] processing type peap
Wed Nov 14 19:07:35 2012 : Info: [peap] processing EAP-TLS
Wed Nov 14 19:07:35 2012 : Info: [peap] Received TLS ACK
Wed Nov 14 19:07:35 2012 : Info: [peap] ACK handshake is finished
Wed Nov 14 19:07:35 2012 : Info: [peap] eaptls_verify returned 3 
Wed Nov 14 19:07:35 2012 : Info: [peap] eaptls_process returned 3 
Wed Nov 14 19:07:35 2012 : Info: [peap] EAPTLS_SUCCESS
Wed Nov 14 19:07:35 2012 : Info: [peap] Session established.  Decoding tunneled attributes.
Wed Nov 14 19:07:35 2012 : Info: [peap] Peap state TUNNEL ESTABLISHED
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 27 to 192.168.2.10 port 3079
	EAP-Message = 0x0107002b190017030100206410cc3341cf32e248499107d1de3a22d0271cf598c7217f03a69a5c288b9846
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x7d0c8271780b9b642a42e5741cc98360
Wed Nov 14 19:07:35 2012 : Info: Finished request 5.
Wed Nov 14 19:07:35 2012 : Debug: Going to the next request
Wed Nov 14 19:07:35 2012 : Debug: Waking up in 4.6 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=28, length=217
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x0207005019001703010020763581dc3b1f1b3af7176c3ef92714467ced4b063995704a9fda6238f28e5c2717030100207dcd81e5b7089fcefe5229d5aa1466e49339c334a37958e8a04e6119bfdc45f1
	State = 0x7d0c8271780b9b642a42e5741cc98360
	Message-Authenticator = 0x009a330cc06bb2f10fdef27fb6af375e
Wed Nov 14 19:07:35 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:35 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:35 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:35 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:35 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:35 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP packet type response id 7 length 80
Wed Nov 14 19:07:35 2012 : Info: [eap] Continuing tunnel setup.
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns ok
Wed Nov 14 19:07:35 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:35 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:35 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP/peap
Wed Nov 14 19:07:35 2012 : Info: [eap] processing type peap
Wed Nov 14 19:07:35 2012 : Info: [peap] processing EAP-TLS
Wed Nov 14 19:07:35 2012 : Info: [peap] eaptls_verify returned 7 
Wed Nov 14 19:07:35 2012 : Info: [peap] Done initial handshake
Wed Nov 14 19:07:35 2012 : Info: [peap] eaptls_process returned 7 
Wed Nov 14 19:07:35 2012 : Info: [peap] EAPTLS_OK
Wed Nov 14 19:07:35 2012 : Info: [peap] Session established.  Decoding tunneled attributes.
Wed Nov 14 19:07:35 2012 : Info: [peap] Peap state WAITING FOR INNER IDENTITY
Wed Nov 14 19:07:35 2012 : Info: [peap] Identity - remy
Wed Nov 14 19:07:35 2012 : Info: [peap] Got inner identity 'remy'
Wed Nov 14 19:07:35 2012 : Info: [peap] Setting default EAP type for tunneled EAP session.
Wed Nov 14 19:07:35 2012 : Info: [peap] Got tunneled request
	EAP-Message = 0x020700090172656d79
server  {
Wed Nov 14 19:07:35 2012 : Info: [peap] Setting User-Name to remy
Sending tunneled request
	EAP-Message = 0x020700090172656d79
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = "remy"
server inner-tunnel {
Wed Nov 14 19:07:35 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel
Wed Nov 14 19:07:35 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:35 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:35 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:35 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:35 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[control] returns noop
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP packet type response id 7 length 9
Wed Nov 14 19:07:35 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns updated
Wed Nov 14 19:07:35 2012 : Info: [files] users: Matched entry remy at line 206
Wed Nov 14 19:07:35 2012 : Info: ++[files] returns ok
Wed Nov 14 19:07:35 2012 : Info: ++[expiration] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[logintime] returns noop
Wed Nov 14 19:07:35 2012 : Info: [pap] Normalizing SHA-Password from hex encoding
Wed Nov 14 19:07:35 2012 : Info: [pap] WARNING: Auth-Type already set.  Not setting to PAP
Wed Nov 14 19:07:35 2012 : Info: ++[pap] returns noop
Wed Nov 14 19:07:35 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:35 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
Wed Nov 14 19:07:35 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP Identity
Wed Nov 14 19:07:35 2012 : Info: [eap] processing type mschapv2
Wed Nov 14 19:07:35 2012 : Debug: rlm_eap_mschapv2: Issuing Challenge
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns handled
} # server inner-tunnel
Wed Nov 14 19:07:35 2012 : Info: [peap] Got tunneled reply code 11
	EAP-Message = 0x0108001e1a01080019107b5e8711d1c93282ae82c68e2d51985972656d79
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x7d6763917d6f79a05af800b89bff6744
Wed Nov 14 19:07:35 2012 : Info: [peap] Got tunneled reply RADIUS code 11
	EAP-Message = 0x0108001e1a01080019107b5e8711d1c93282ae82c68e2d51985972656d79
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x7d6763917d6f79a05af800b89bff6744
Wed Nov 14 19:07:35 2012 : Info: [peap] Got tunneled Access-Challenge
  PEAP tunnel data out 0000: 1a 01 08 00 19 10 7b 5e 87 11 d1 c9 32 82 ae 82 
  PEAP tunnel data out 0010: c6 8e 2d 51 98 59 72 65 6d 79 
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 28 to 192.168.2.10 port 3079
	EAP-Message = 0x0108003b190017030100300792acea7915ced4cae73061d1532bc0ab5835a72cc23c5926e8c54c0292c0ef81b995cba92a18a50cd4681054327097
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x7d0c82717b049b642a42e5741cc98360
Wed Nov 14 19:07:35 2012 : Info: Finished request 6.
Wed Nov 14 19:07:35 2012 : Debug: Going to the next request
Wed Nov 14 19:07:35 2012 : Debug: Waking up in 4.5 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=29, length=265
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x02080080190017030100207024487f4cf8a8fc2888ad22cbafac0d3b600b8044f06fbec1920c1cb896999017030100501ecbc14032635cfd6d4d82eefb2f1cd6d1b0a52034e5009cd641bf475969dc900c058608d25457c0a1e45d34b1e86ce5f272d195a9d9aa308fe3b53ca7dcde47573e7f98f5987c71e33a2f67f9f70a36
	State = 0x7d0c82717b049b642a42e5741cc98360
	Message-Authenticator = 0x3d2e47136c560ea1f472d23831fe90b0
Wed Nov 14 19:07:35 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:35 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:35 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:35 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:35 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:35 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP packet type response id 8 length 128
Wed Nov 14 19:07:35 2012 : Info: [eap] Continuing tunnel setup.
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns ok
Wed Nov 14 19:07:35 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:35 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:35 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP/peap
Wed Nov 14 19:07:35 2012 : Info: [eap] processing type peap
Wed Nov 14 19:07:35 2012 : Info: [peap] processing EAP-TLS
Wed Nov 14 19:07:35 2012 : Info: [peap] eaptls_verify returned 7 
Wed Nov 14 19:07:35 2012 : Info: [peap] Done initial handshake
Wed Nov 14 19:07:35 2012 : Info: [peap] eaptls_process returned 7 
Wed Nov 14 19:07:35 2012 : Info: [peap] EAPTLS_OK
Wed Nov 14 19:07:35 2012 : Info: [peap] Session established.  Decoding tunneled attributes.
Wed Nov 14 19:07:35 2012 : Info: [peap] Peap state phase2
Wed Nov 14 19:07:35 2012 : Info: [peap] EAP type mschapv2
Wed Nov 14 19:07:35 2012 : Info: [peap] Got tunneled request
	EAP-Message = 0x0208003f1a0208003a31a9774074fca3160b7f5566619041727100000000000000006677a8de72c075766fc843e81d157732e116af689f2fe5db0072656d79
server  {
Wed Nov 14 19:07:35 2012 : Info: [peap] Setting User-Name to remy
Sending tunneled request
	EAP-Message = 0x0208003f1a0208003a31a9774074fca3160b7f5566619041727100000000000000006677a8de72c075766fc843e81d157732e116af689f2fe5db0072656d79
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = "remy"
	State = 0x7d6763917d6f79a05af800b89bff6744
server inner-tunnel {
Wed Nov 14 19:07:35 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel
Wed Nov 14 19:07:35 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:35 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:35 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:35 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:35 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[control] returns noop
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP packet type response id 8 length 63
Wed Nov 14 19:07:35 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns updated
Wed Nov 14 19:07:35 2012 : Info: [files] users: Matched entry remy at line 206
Wed Nov 14 19:07:35 2012 : Info: ++[files] returns ok
Wed Nov 14 19:07:35 2012 : Info: ++[expiration] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[logintime] returns noop
Wed Nov 14 19:07:35 2012 : Info: [pap] Normalizing SHA-Password from hex encoding
Wed Nov 14 19:07:35 2012 : Info: [pap] WARNING: Auth-Type already set.  Not setting to PAP
Wed Nov 14 19:07:35 2012 : Info: ++[pap] returns noop
Wed Nov 14 19:07:35 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:35 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
Wed Nov 14 19:07:35 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:35 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP/mschapv2
Wed Nov 14 19:07:35 2012 : Info: [eap] processing type mschapv2
Wed Nov 14 19:07:35 2012 : Info: [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
Wed Nov 14 19:07:35 2012 : Info: [mschapv2] +- entering group MS-CHAP {...}
Wed Nov 14 19:07:35 2012 : Info: [mschap] No Cleartext-Password configured.  Cannot create LM-Password.
Wed Nov 14 19:07:35 2012 : Info: [mschap] No Cleartext-Password configured.  Cannot create NT-Password.
Wed Nov 14 19:07:35 2012 : Info: [mschap] Creating challenge hash with username: remy
Wed Nov 14 19:07:35 2012 : Info: [mschap] Told to do MS-CHAPv2 for remy with NT-Password
Wed Nov 14 19:07:35 2012 : Info: [mschap] FAILED: No NT/LM-Password.  Cannot perform authentication.
Wed Nov 14 19:07:35 2012 : Info: [mschap] FAILED: MS-CHAP2-Response is incorrect
Wed Nov 14 19:07:35 2012 : Info: ++[mschap] returns reject
Wed Nov 14 19:07:35 2012 : Info: [eap] Freeing handler
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns reject
Wed Nov 14 19:07:35 2012 : Info: Failed to authenticate the user.
Wed Nov 14 19:07:35 2012 : Auth: Login incorrect: [remy/<via Auth-Type = EAP>] (from client remywifi port 0 via TLS tunnel)
} # server inner-tunnel
Wed Nov 14 19:07:35 2012 : Info: [peap] Got tunneled reply code 3
	MS-CHAP-Error = "\010E=691 R=1"
	EAP-Message = 0x04080004
	Message-Authenticator = 0x00000000000000000000000000000000
Wed Nov 14 19:07:35 2012 : Info: [peap] Got tunneled reply RADIUS code 3
	MS-CHAP-Error = "\010E=691 R=1"
	EAP-Message = 0x04080004
	Message-Authenticator = 0x00000000000000000000000000000000
Wed Nov 14 19:07:35 2012 : Info: [peap] Tunneled authentication was rejected.
Wed Nov 14 19:07:35 2012 : Info: [peap] FAILURE
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 29 to 192.168.2.10 port 3079
	EAP-Message = 0x0109002b1900170301002031aa12c26bbbb75bc2f4b5769ea50a778706db350b7d432bd726678aa1e5e5c7
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x7d0c82717a059b642a42e5741cc98360
Wed Nov 14 19:07:35 2012 : Info: Finished request 7.
Wed Nov 14 19:07:35 2012 : Debug: Going to the next request
Wed Nov 14 19:07:35 2012 : Debug: Waking up in 4.4 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=30, length=217
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x0209005019001703010020c7a95d84b564f93a1960cf7f6bc86f65b86886c7987972b349ba6a74873f3e9017030100205dedc04e347a1f59d6d094caf3b4aeb5b9de55f1c916f15ab1b82b0b0f9e6a8c
	State = 0x7d0c82717a059b642a42e5741cc98360
	Message-Authenticator = 0x573c643c57caf5105bc178d26d2f844e
Wed Nov 14 19:07:35 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:35 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:35 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:35 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:35 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:35 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:35 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP packet type response id 9 length 80
Wed Nov 14 19:07:35 2012 : Info: [eap] Continuing tunnel setup.
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns ok
Wed Nov 14 19:07:35 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:35 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:35 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:35 2012 : Info: [eap] EAP/peap
Wed Nov 14 19:07:35 2012 : Info: [eap] processing type peap
Wed Nov 14 19:07:35 2012 : Info: [peap] processing EAP-TLS
Wed Nov 14 19:07:35 2012 : Info: [peap] eaptls_verify returned 7 
Wed Nov 14 19:07:35 2012 : Info: [peap] Done initial handshake
Wed Nov 14 19:07:35 2012 : Info: [peap] eaptls_process returned 7 
Wed Nov 14 19:07:35 2012 : Info: [peap] EAPTLS_OK
Wed Nov 14 19:07:35 2012 : Info: [peap] Session established.  Decoding tunneled attributes.
Wed Nov 14 19:07:35 2012 : Info: [peap] Peap state send tlv failure
Wed Nov 14 19:07:35 2012 : Info: [peap] Received EAP-TLV response.
Wed Nov 14 19:07:35 2012 : Info: [peap]  The users session was previously rejected: returning reject (again.)
Wed Nov 14 19:07:35 2012 : Info: [peap]  *** This means you need to read the PREVIOUS messages in the debug output
Wed Nov 14 19:07:35 2012 : Info: [peap]  *** to find out the reason why the user was rejected.
Wed Nov 14 19:07:35 2012 : Info: [peap]  *** Look for "reject" or "fail".  Those earlier messages will tell you.
Wed Nov 14 19:07:35 2012 : Info: [peap]  *** what went wrong, and how to fix the problem.
Wed Nov 14 19:07:35 2012 : Info: [eap] Handler failed in EAP/peap
Wed Nov 14 19:07:35 2012 : Info: [eap] Failed in EAP select
Wed Nov 14 19:07:35 2012 : Info: ++[eap] returns invalid
Wed Nov 14 19:07:35 2012 : Info: Failed to authenticate the user.
Wed Nov 14 19:07:35 2012 : Auth: Login incorrect: [remy/<via Auth-Type = EAP>] (from client remywifi port 0 cli A0-0B-BA-D6-63-BE)
Wed Nov 14 19:07:35 2012 : Info: Using Post-Auth-Type Reject
Wed Nov 14 19:07:35 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:35 2012 : Info: +- entering group REJECT {...}
Wed Nov 14 19:07:35 2012 : Info: [attr_filter.access_reject] 	expand: %{User-Name} -> remy
Wed Nov 14 19:07:35 2012 : Debug: attr_filter: Matched entry DEFAULT at line 11
Wed Nov 14 19:07:35 2012 : Info: ++[attr_filter.access_reject] returns updated
Wed Nov 14 19:07:35 2012 : Info: Delaying reject of request 8 for 1 seconds
Wed Nov 14 19:07:35 2012 : Debug: Going to the next request
Wed Nov 14 19:07:35 2012 : Debug: Waking up in 0.9 seconds.
Wed Nov 14 19:07:36 2012 : Info: Sending delayed reject for request 8
Sending Access-Reject of id 30 to 192.168.2.10 port 3079
	EAP-Message = 0x04090004
	Message-Authenticator = 0x00000000000000000000000000000000
Wed Nov 14 19:07:36 2012 : Debug: Waking up in 3.4 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=31, length=128
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020100090172656d79
	Message-Authenticator = 0xaf83843780d194536c8f2cbdd4771206
Wed Nov 14 19:07:39 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:39 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:39 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:39 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:39 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:39 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP packet type response id 1 length 9
Wed Nov 14 19:07:39 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns updated
Wed Nov 14 19:07:39 2012 : Info: [files] users: Matched entry remy at line 206
Wed Nov 14 19:07:39 2012 : Info: ++[files] returns ok
Wed Nov 14 19:07:39 2012 : Info: ++[expiration] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[logintime] returns noop
Wed Nov 14 19:07:39 2012 : Info: [pap] Normalizing SHA-Password from hex encoding
Wed Nov 14 19:07:39 2012 : Info: [pap] WARNING: Auth-Type already set.  Not setting to PAP
Wed Nov 14 19:07:39 2012 : Info: ++[pap] returns noop
Wed Nov 14 19:07:39 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:39 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP Identity
Wed Nov 14 19:07:39 2012 : Info: [eap] processing type md5
Wed Nov 14 19:07:39 2012 : Debug: rlm_eap_md5: Issuing Challenge
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 31 to 192.168.2.10 port 3079
	EAP-Message = 0x0102001604103032a3117595549ed7bd734fabc7dc13
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xacbba286acb9a699580815ef5be5c20c
Wed Nov 14 19:07:39 2012 : Info: Finished request 9.
Wed Nov 14 19:07:39 2012 : Debug: Going to the next request
Wed Nov 14 19:07:39 2012 : Debug: Waking up in 1.1 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=32, length=143
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020200060319
	State = 0xacbba286acb9a699580815ef5be5c20c
	Message-Authenticator = 0x7f6b8814d24c7ef04ab51b3ea7afbb9c
Wed Nov 14 19:07:39 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:39 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:39 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:39 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:39 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:39 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP packet type response id 2 length 6
Wed Nov 14 19:07:39 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns updated
Wed Nov 14 19:07:39 2012 : Info: [files] users: Matched entry remy at line 206
Wed Nov 14 19:07:39 2012 : Info: ++[files] returns ok
Wed Nov 14 19:07:39 2012 : Info: ++[expiration] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[logintime] returns noop
Wed Nov 14 19:07:39 2012 : Info: [pap] Normalizing SHA-Password from hex encoding
Wed Nov 14 19:07:39 2012 : Info: [pap] WARNING: Auth-Type already set.  Not setting to PAP
Wed Nov 14 19:07:39 2012 : Info: ++[pap] returns noop
Wed Nov 14 19:07:39 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:39 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:39 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP NAK
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP-NAK asked for EAP-Type/peap
Wed Nov 14 19:07:39 2012 : Info: [eap] processing type tls
Wed Nov 14 19:07:39 2012 : Info: [tls] Initiate
Wed Nov 14 19:07:39 2012 : Info: [tls] Start returned 1
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 32 to 192.168.2.10 port 3079
	EAP-Message = 0x010300061920
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xacbba286adb8bb99580815ef5be5c20c
Wed Nov 14 19:07:39 2012 : Info: Finished request 10.
Wed Nov 14 19:07:39 2012 : Debug: Going to the next request
Wed Nov 14 19:07:39 2012 : Debug: Waking up in 1.1 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=33, length=345
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020300d01980000000c616030100c1010000bd030150a3ddeab34a39df2ea88cebe01495fe9d69a7104818a8d9ab3757d0daaa6274000054c014c00ac022c02100390038c00fc0050035c012c008c01cc01b00160013c00dc003000ac013c009c01fc01e00330032c00ec004002fc011c007c00cc002000500040015001200090014001100080006000300ff01000040000b000403000102000a00340032000e000d0019000b000c00180009000a00160017000800060007001400150004000500120013000100020003000f00100011
	State = 0xacbba286adb8bb99580815ef5be5c20c
	Message-Authenticator = 0x544053244b2ec02f2b45f5d48b90b2c9
Wed Nov 14 19:07:39 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:39 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:39 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:39 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:39 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:39 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP packet type response id 3 length 208
Wed Nov 14 19:07:39 2012 : Info: [eap] Continuing tunnel setup.
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns ok
Wed Nov 14 19:07:39 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:39 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:39 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP/peap
Wed Nov 14 19:07:39 2012 : Info: [eap] processing type peap
Wed Nov 14 19:07:39 2012 : Info: [peap] processing EAP-TLS
Wed Nov 14 19:07:39 2012 : Debug:   TLS Length 198
Wed Nov 14 19:07:39 2012 : Info: [peap] Length Included
Wed Nov 14 19:07:39 2012 : Info: [peap] eaptls_verify returned 11 
Wed Nov 14 19:07:39 2012 : Info: [peap]     (other): before/accept initialization
Wed Nov 14 19:07:39 2012 : Info: [peap]     TLS_accept: before/accept initialization
Wed Nov 14 19:07:39 2012 : Info: [peap] <<< TLS 1.0 Handshake [length 00c1], ClientHello  
Wed Nov 14 19:07:39 2012 : Info: [peap]     TLS_accept: SSLv3 read client hello A
Wed Nov 14 19:07:39 2012 : Info: [peap] >>> TLS 1.0 Handshake [length 0039], ServerHello  
Wed Nov 14 19:07:39 2012 : Info: [peap]     TLS_accept: SSLv3 write server hello A
Wed Nov 14 19:07:39 2012 : Info: [peap] >>> TLS 1.0 Handshake [length 02ca], Certificate  
Wed Nov 14 19:07:39 2012 : Info: [peap]     TLS_accept: SSLv3 write certificate A
Wed Nov 14 19:07:39 2012 : Info: [peap] >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange  
Wed Nov 14 19:07:39 2012 : Info: [peap]     TLS_accept: SSLv3 write key exchange A
Wed Nov 14 19:07:39 2012 : Info: [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone  
Wed Nov 14 19:07:39 2012 : Info: [peap]     TLS_accept: SSLv3 write server done A
Wed Nov 14 19:07:39 2012 : Info: [peap]     TLS_accept: SSLv3 flush data
Wed Nov 14 19:07:39 2012 : Info: [peap]     TLS_accept: Need to read more data: SSLv3 read client certificate A
Wed Nov 14 19:07:39 2012 : Debug: In SSL Handshake Phase 
Wed Nov 14 19:07:39 2012 : Debug: In SSL Accept mode  
Wed Nov 14 19:07:39 2012 : Info: [peap] eaptls_process returned 13 
Wed Nov 14 19:07:39 2012 : Info: [peap] EAPTLS_HANDLED
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 33 to 192.168.2.10 port 3079
	EAP-Message = 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
	EAP-Message = 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
	EAP-Message = 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
	EAP-Message = 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
	EAP-Message = 0xbcbd704f43446a44b24b684c
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xacbba286aebfbb99580815ef5be5c20c
Wed Nov 14 19:07:39 2012 : Info: Finished request 11.
Wed Nov 14 19:07:39 2012 : Debug: Going to the next request
Wed Nov 14 19:07:39 2012 : Debug: Waking up in 0.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=17, length=217
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x0209005019001703010020d9219b58cba739373d784169bf64589d123f4ec53510ba7d6c4c4e063b5e9aaa17030100200e176cdc8f35cab58ef283b05dcf08be9e70ac12f3cecf0532e478440fca803a
	State = 0xfebf194ff9b600611b1b83f17cf16f5f
	Message-Authenticator = 0x83ce619dfb184f8beb17815e20809a54
Wed Nov 14 19:07:39 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:39 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:39 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:39 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:39 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:39 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP packet type response id 9 length 80
Wed Nov 14 19:07:39 2012 : Info: [eap] Continuing tunnel setup.
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns ok
Wed Nov 14 19:07:39 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:39 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:39 2012 : Error: rlm_eap: No EAP session matching the State variable.
Wed Nov 14 19:07:39 2012 : Info: [eap] Either EAP-request timed out OR EAP-response to an unknown EAP-request
Wed Nov 14 19:07:39 2012 : Info: [eap] Failed in handler
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns invalid
Wed Nov 14 19:07:39 2012 : Info: Failed to authenticate the user.
Wed Nov 14 19:07:39 2012 : Auth: Login incorrect: [remy/<via Auth-Type = EAP>] (from client remywifi port 0 cli A0-0B-BA-D6-63-BE)
Wed Nov 14 19:07:39 2012 : Info: Using Post-Auth-Type Reject
Wed Nov 14 19:07:39 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group REJECT {...}
Wed Nov 14 19:07:39 2012 : Info: [attr_filter.access_reject] 	expand: %{User-Name} -> remy
Wed Nov 14 19:07:39 2012 : Debug: attr_filter: Matched entry DEFAULT at line 11
Wed Nov 14 19:07:39 2012 : Info: ++[attr_filter.access_reject] returns updated
Wed Nov 14 19:07:39 2012 : Info: Delaying reject of request 12 for 1 seconds
Wed Nov 14 19:07:39 2012 : Debug: Going to the next request
Wed Nov 14 19:07:39 2012 : Debug: Waking up in 0.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=34, length=143
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020400061900
	State = 0xacbba286aebfbb99580815ef5be5c20c
	Message-Authenticator = 0xe2755a6101a44dc4e0aef40f6c65c1a8
Wed Nov 14 19:07:39 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:39 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:39 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:39 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:39 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:39 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP packet type response id 4 length 6
Wed Nov 14 19:07:39 2012 : Info: [eap] Continuing tunnel setup.
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns ok
Wed Nov 14 19:07:39 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:39 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:39 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP/peap
Wed Nov 14 19:07:39 2012 : Info: [eap] processing type peap
Wed Nov 14 19:07:39 2012 : Info: [peap] processing EAP-TLS
Wed Nov 14 19:07:39 2012 : Info: [peap] Received TLS ACK
Wed Nov 14 19:07:39 2012 : Info: [peap] ACK handshake fragment handler
Wed Nov 14 19:07:39 2012 : Info: [peap] eaptls_verify returned 1 
Wed Nov 14 19:07:39 2012 : Info: [peap] eaptls_process returned 13 
Wed Nov 14 19:07:39 2012 : Info: [peap] EAPTLS_HANDLED
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 34 to 192.168.2.10 port 3079
	EAP-Message = 0x010500761900205dbaea5831266e95882e0d2ae3b6108aa88ab13448d43d5e4eeda883cc75ab43285ec994347583f01b76d3243c76f7aeec52e49fe1bc3aa5d6112195919d2a254edc6e01321b08787e3569c31fc42599934def60211485b59161f0bba5143f62a6ee6f52024216030100040e000000
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xacbba286afbebb99580815ef5be5c20c
Wed Nov 14 19:07:39 2012 : Info: Finished request 13.
Wed Nov 14 19:07:39 2012 : Debug: Going to the next request
Wed Nov 14 19:07:39 2012 : Debug: Waking up in 0.9 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=35, length=281
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020500901980000000861603010046100000424104ad14b2464620cbfa47b6012b1ef0943be66a53dd39143fe9ce41ba5cf3ea0400ba381d2509f868e9cc782fb02cb4088c69c1622d514a93033d3b55c5d24c14cf1403010001011603010030ba3a2e7a32942d0dc70a5856c8b2f44136347bc83043829eb8ab17eeea891145960381ee6bfb8ea398ead99a970a830b
	State = 0xacbba286afbebb99580815ef5be5c20c
	Message-Authenticator = 0xb5a2c45d2078a956368b0603b774c1c7
Wed Nov 14 19:07:39 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:39 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:39 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:39 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:39 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:39 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP packet type response id 5 length 144
Wed Nov 14 19:07:39 2012 : Info: [eap] Continuing tunnel setup.
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns ok
Wed Nov 14 19:07:39 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:39 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:39 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP/peap
Wed Nov 14 19:07:39 2012 : Info: [eap] processing type peap
Wed Nov 14 19:07:39 2012 : Info: [peap] processing EAP-TLS
Wed Nov 14 19:07:39 2012 : Debug:   TLS Length 134
Wed Nov 14 19:07:39 2012 : Info: [peap] Length Included
Wed Nov 14 19:07:39 2012 : Info: [peap] eaptls_verify returned 11 
Wed Nov 14 19:07:39 2012 : Info: [peap] <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange  
Wed Nov 14 19:07:39 2012 : Info: [peap]     TLS_accept: SSLv3 read client key exchange A
Wed Nov 14 19:07:39 2012 : Info: [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001]  
Wed Nov 14 19:07:39 2012 : Info: [peap] <<< TLS 1.0 Handshake [length 0010], Finished  
Wed Nov 14 19:07:39 2012 : Info: [peap]     TLS_accept: SSLv3 read finished A
Wed Nov 14 19:07:39 2012 : Info: [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001]  
Wed Nov 14 19:07:39 2012 : Info: [peap]     TLS_accept: SSLv3 write change cipher spec A
Wed Nov 14 19:07:39 2012 : Info: [peap] >>> TLS 1.0 Handshake [length 0010], Finished  
Wed Nov 14 19:07:39 2012 : Info: [peap]     TLS_accept: SSLv3 write finished A
Wed Nov 14 19:07:39 2012 : Info: [peap]     TLS_accept: SSLv3 flush data
Wed Nov 14 19:07:39 2012 : Info: [peap]     (other): SSL negotiation finished successfully
Wed Nov 14 19:07:39 2012 : Debug: SSL Connection Established 
Wed Nov 14 19:07:39 2012 : Info: [peap] eaptls_process returned 13 
Wed Nov 14 19:07:39 2012 : Info: [peap] EAPTLS_HANDLED
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 35 to 192.168.2.10 port 3079
	EAP-Message = 0x010600411900140301000101160301003063ec27ce6ee91f17d1287a6c15dac8bd76c1525a76c4870909b7f1cf2166dd9e0b9cd091c19506dd4d59ee21831db971
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xacbba286a8bdbb99580815ef5be5c20c
Wed Nov 14 19:07:39 2012 : Info: Finished request 14.
Wed Nov 14 19:07:39 2012 : Debug: Going to the next request
Wed Nov 14 19:07:39 2012 : Debug: Waking up in 0.8 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=36, length=143
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020600061900
	State = 0xacbba286a8bdbb99580815ef5be5c20c
	Message-Authenticator = 0x619b4b43327d960fb4414bf038c4e06e
Wed Nov 14 19:07:39 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:39 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:39 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:39 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:39 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:39 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP packet type response id 6 length 6
Wed Nov 14 19:07:39 2012 : Info: [eap] Continuing tunnel setup.
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns ok
Wed Nov 14 19:07:39 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:39 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:39 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP/peap
Wed Nov 14 19:07:39 2012 : Info: [eap] processing type peap
Wed Nov 14 19:07:39 2012 : Info: [peap] processing EAP-TLS
Wed Nov 14 19:07:39 2012 : Info: [peap] Received TLS ACK
Wed Nov 14 19:07:39 2012 : Info: [peap] ACK handshake is finished
Wed Nov 14 19:07:39 2012 : Info: [peap] eaptls_verify returned 3 
Wed Nov 14 19:07:39 2012 : Info: [peap] eaptls_process returned 3 
Wed Nov 14 19:07:39 2012 : Info: [peap] EAPTLS_SUCCESS
Wed Nov 14 19:07:39 2012 : Info: [peap] Session established.  Decoding tunneled attributes.
Wed Nov 14 19:07:39 2012 : Info: [peap] Peap state TUNNEL ESTABLISHED
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 36 to 192.168.2.10 port 3079
	EAP-Message = 0x0107002b190017030100205ee89caf00736c92e56b2bfd41b028f47714edbf734fe5d5f2c3835d60f209a8
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xacbba286a9bcbb99580815ef5be5c20c
Wed Nov 14 19:07:39 2012 : Info: Finished request 15.
Wed Nov 14 19:07:39 2012 : Debug: Going to the next request
Wed Nov 14 19:07:39 2012 : Debug: Waking up in 0.8 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=37, length=217
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x0207005019001703010020eb7d36551601194078b9692d643839797a7b4dc5928ec5e1d23a3478e18c41241703010020c7a943e10dfff507ebc1722d105f20c140809741b675c7dc64794723c2b98c33
	State = 0xacbba286a9bcbb99580815ef5be5c20c
	Message-Authenticator = 0xde353ac71c8100fce49b5656bfb7962a
Wed Nov 14 19:07:39 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:39 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:39 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:39 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:39 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:39 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP packet type response id 7 length 80
Wed Nov 14 19:07:39 2012 : Info: [eap] Continuing tunnel setup.
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns ok
Wed Nov 14 19:07:39 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:39 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:39 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP/peap
Wed Nov 14 19:07:39 2012 : Info: [eap] processing type peap
Wed Nov 14 19:07:39 2012 : Info: [peap] processing EAP-TLS
Wed Nov 14 19:07:39 2012 : Info: [peap] eaptls_verify returned 7 
Wed Nov 14 19:07:39 2012 : Info: [peap] Done initial handshake
Wed Nov 14 19:07:39 2012 : Info: [peap] eaptls_process returned 7 
Wed Nov 14 19:07:39 2012 : Info: [peap] EAPTLS_OK
Wed Nov 14 19:07:39 2012 : Info: [peap] Session established.  Decoding tunneled attributes.
Wed Nov 14 19:07:39 2012 : Info: [peap] Peap state WAITING FOR INNER IDENTITY
Wed Nov 14 19:07:39 2012 : Info: [peap] Identity - remy
Wed Nov 14 19:07:39 2012 : Info: [peap] Got inner identity 'remy'
Wed Nov 14 19:07:39 2012 : Info: [peap] Setting default EAP type for tunneled EAP session.
Wed Nov 14 19:07:39 2012 : Info: [peap] Got tunneled request
	EAP-Message = 0x020700090172656d79
server  {
Wed Nov 14 19:07:39 2012 : Info: [peap] Setting User-Name to remy
Sending tunneled request
	EAP-Message = 0x020700090172656d79
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = "remy"
server inner-tunnel {
Wed Nov 14 19:07:39 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel
Wed Nov 14 19:07:39 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:39 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:39 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:39 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:39 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[control] returns noop
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP packet type response id 7 length 9
Wed Nov 14 19:07:39 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns updated
Wed Nov 14 19:07:39 2012 : Info: [files] users: Matched entry remy at line 206
Wed Nov 14 19:07:39 2012 : Info: ++[files] returns ok
Wed Nov 14 19:07:39 2012 : Info: ++[expiration] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[logintime] returns noop
Wed Nov 14 19:07:39 2012 : Info: [pap] Normalizing SHA-Password from hex encoding
Wed Nov 14 19:07:39 2012 : Info: [pap] WARNING: Auth-Type already set.  Not setting to PAP
Wed Nov 14 19:07:39 2012 : Info: ++[pap] returns noop
Wed Nov 14 19:07:39 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:39 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
Wed Nov 14 19:07:39 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP Identity
Wed Nov 14 19:07:39 2012 : Info: [eap] processing type mschapv2
Wed Nov 14 19:07:39 2012 : Debug: rlm_eap_mschapv2: Issuing Challenge
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns handled
} # server inner-tunnel
Wed Nov 14 19:07:39 2012 : Info: [peap] Got tunneled reply code 11
	EAP-Message = 0x0108001e1a0108001910afa64c228471975dafb7f38bad4b56fe72656d79
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x08a00dc708a817263f872d2fe752bfcf
Wed Nov 14 19:07:39 2012 : Info: [peap] Got tunneled reply RADIUS code 11
	EAP-Message = 0x0108001e1a0108001910afa64c228471975dafb7f38bad4b56fe72656d79
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x08a00dc708a817263f872d2fe752bfcf
Wed Nov 14 19:07:39 2012 : Info: [peap] Got tunneled Access-Challenge
  PEAP tunnel data out 0000: 1a 01 08 00 19 10 af a6 4c 22 84 71 97 5d af b7 
  PEAP tunnel data out 0010: f3 8b ad 4b 56 fe 72 65 6d 79 
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 37 to 192.168.2.10 port 3079
	EAP-Message = 0x0108003b190017030100301e7cad42c59e94050e0c379f9fadcf5d380a30b9e8bf0af2702cf35bc138cfe119f3b146fffb16ce05017548e5b24c59
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xacbba286aab3bb99580815ef5be5c20c
Wed Nov 14 19:07:39 2012 : Info: Finished request 16.
Wed Nov 14 19:07:39 2012 : Debug: Going to the next request
Wed Nov 14 19:07:39 2012 : Debug: Waking up in 0.7 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=38, length=265
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x0208008019001703010020877d363bb22c97f5f90edfb64f6b6940425a1a2b1a883344e06efb3e895cd5211703010050c2cdb7bfa87130986ab6e3c144046f455ffa298c4fb21da246c24b03fd4cb8a42c884c5844e05ca040a407884a06eceed6c24ce9a7e5abe9c07bf1cc9ce30ebcd16b6d6413615a63ef5515b2ed08ee86
	State = 0xacbba286aab3bb99580815ef5be5c20c
	Message-Authenticator = 0xba0a07663c1838a10f492b0cd9725d5a
Wed Nov 14 19:07:39 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:39 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:39 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:39 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:39 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:39 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP packet type response id 8 length 128
Wed Nov 14 19:07:39 2012 : Info: [eap] Continuing tunnel setup.
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns ok
Wed Nov 14 19:07:39 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:39 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:39 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP/peap
Wed Nov 14 19:07:39 2012 : Info: [eap] processing type peap
Wed Nov 14 19:07:39 2012 : Info: [peap] processing EAP-TLS
Wed Nov 14 19:07:39 2012 : Info: [peap] eaptls_verify returned 7 
Wed Nov 14 19:07:39 2012 : Info: [peap] Done initial handshake
Wed Nov 14 19:07:39 2012 : Info: [peap] eaptls_process returned 7 
Wed Nov 14 19:07:39 2012 : Info: [peap] EAPTLS_OK
Wed Nov 14 19:07:39 2012 : Info: [peap] Session established.  Decoding tunneled attributes.
Wed Nov 14 19:07:39 2012 : Info: [peap] Peap state phase2
Wed Nov 14 19:07:39 2012 : Info: [peap] EAP type mschapv2
Wed Nov 14 19:07:39 2012 : Info: [peap] Got tunneled request
	EAP-Message = 0x0208003f1a0208003a3140fc2c950e605b3352ab394335f5ccb000000000000000009668435b3034772758340cf2d5d429ec51e01a623332340f0072656d79
server  {
Wed Nov 14 19:07:39 2012 : Info: [peap] Setting User-Name to remy
Sending tunneled request
	EAP-Message = 0x0208003f1a0208003a3140fc2c950e605b3352ab394335f5ccb000000000000000009668435b3034772758340cf2d5d429ec51e01a623332340f0072656d79
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = "remy"
	State = 0x08a00dc708a817263f872d2fe752bfcf
server inner-tunnel {
Wed Nov 14 19:07:39 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel
Wed Nov 14 19:07:39 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:39 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:39 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:39 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:39 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[control] returns noop
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP packet type response id 8 length 63
Wed Nov 14 19:07:39 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns updated
Wed Nov 14 19:07:39 2012 : Info: [files] users: Matched entry remy at line 206
Wed Nov 14 19:07:39 2012 : Info: ++[files] returns ok
Wed Nov 14 19:07:39 2012 : Info: ++[expiration] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[logintime] returns noop
Wed Nov 14 19:07:39 2012 : Info: [pap] Normalizing SHA-Password from hex encoding
Wed Nov 14 19:07:39 2012 : Info: [pap] WARNING: Auth-Type already set.  Not setting to PAP
Wed Nov 14 19:07:39 2012 : Info: ++[pap] returns noop
Wed Nov 14 19:07:39 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:39 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
Wed Nov 14 19:07:39 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:39 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP/mschapv2
Wed Nov 14 19:07:39 2012 : Info: [eap] processing type mschapv2
Wed Nov 14 19:07:39 2012 : Info: [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
Wed Nov 14 19:07:39 2012 : Info: [mschapv2] +- entering group MS-CHAP {...}
Wed Nov 14 19:07:39 2012 : Info: [mschap] No Cleartext-Password configured.  Cannot create LM-Password.
Wed Nov 14 19:07:39 2012 : Info: [mschap] No Cleartext-Password configured.  Cannot create NT-Password.
Wed Nov 14 19:07:39 2012 : Info: [mschap] Creating challenge hash with username: remy
Wed Nov 14 19:07:39 2012 : Info: [mschap] Told to do MS-CHAPv2 for remy with NT-Password
Wed Nov 14 19:07:39 2012 : Info: [mschap] FAILED: No NT/LM-Password.  Cannot perform authentication.
Wed Nov 14 19:07:39 2012 : Info: [mschap] FAILED: MS-CHAP2-Response is incorrect
Wed Nov 14 19:07:39 2012 : Info: ++[mschap] returns reject
Wed Nov 14 19:07:39 2012 : Info: [eap] Freeing handler
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns reject
Wed Nov 14 19:07:39 2012 : Info: Failed to authenticate the user.
Wed Nov 14 19:07:39 2012 : Auth: Login incorrect: [remy/<via Auth-Type = EAP>] (from client remywifi port 0 via TLS tunnel)
} # server inner-tunnel
Wed Nov 14 19:07:39 2012 : Info: [peap] Got tunneled reply code 3
	MS-CHAP-Error = "\010E=691 R=1"
	EAP-Message = 0x04080004
	Message-Authenticator = 0x00000000000000000000000000000000
Wed Nov 14 19:07:39 2012 : Info: [peap] Got tunneled reply RADIUS code 3
	MS-CHAP-Error = "\010E=691 R=1"
	EAP-Message = 0x04080004
	Message-Authenticator = 0x00000000000000000000000000000000
Wed Nov 14 19:07:39 2012 : Info: [peap] Tunneled authentication was rejected.
Wed Nov 14 19:07:39 2012 : Info: [peap] FAILURE
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns handled
Sending Access-Challenge of id 38 to 192.168.2.10 port 3079
	EAP-Message = 0x0109002b1900170301002088529cd825601d2c203f7b0d13e74c5fb537e315f8fc35a29670e9f6ee5e4427
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xacbba286abb2bb99580815ef5be5c20c
Wed Nov 14 19:07:39 2012 : Info: Finished request 17.
Wed Nov 14 19:07:39 2012 : Debug: Going to the next request
Wed Nov 14 19:07:39 2012 : Debug: Waking up in 0.6 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=39, length=217
	User-Name = "remy"
	NAS-IP-Address = 192.168.2.10
	NAS-Identifier = "RalinkAP0"
	NAS-Port = 0
	Called-Station-Id = "00-14-D1-9D-0F-10"
	Calling-Station-Id = "A0-0B-BA-D6-63-BE"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x0209005019001703010020340b82e8496b7eed5e5bbc0e022ee59e1bcbe20c770f1ec5234e2e9eca49e7dc1703010020bc91b7f0f6fe32721f912ea6d435e2a40a578d18dac32dbfdaac42814a686414
	State = 0xacbba286abb2bb99580815ef5be5c20c
	Message-Authenticator = 0x980f8da88d2589caa2e7cef19353f2d4
Wed Nov 14 19:07:39 2012 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authorize {...}
Wed Nov 14 19:07:39 2012 : Info: ++[preprocess] returns ok
Wed Nov 14 19:07:39 2012 : Info: ++[chap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[mschap] returns noop
Wed Nov 14 19:07:39 2012 : Info: ++[digest] returns noop
Wed Nov 14 19:07:39 2012 : Info: [suffix] No '@' in User-Name = "remy", looking up realm NULL
Wed Nov 14 19:07:39 2012 : Info: [suffix] No such realm "NULL"
Wed Nov 14 19:07:39 2012 : Info: ++[suffix] returns noop
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP packet type response id 9 length 80
Wed Nov 14 19:07:39 2012 : Info: [eap] Continuing tunnel setup.
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns ok
Wed Nov 14 19:07:39 2012 : Info: Found Auth-Type = EAP
Wed Nov 14 19:07:39 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group authenticate {...}
Wed Nov 14 19:07:39 2012 : Info: [eap] Request found, released from the list
Wed Nov 14 19:07:39 2012 : Info: [eap] EAP/peap
Wed Nov 14 19:07:39 2012 : Info: [eap] processing type peap
Wed Nov 14 19:07:39 2012 : Info: [peap] processing EAP-TLS
Wed Nov 14 19:07:39 2012 : Info: [peap] eaptls_verify returned 7 
Wed Nov 14 19:07:39 2012 : Info: [peap] Done initial handshake
Wed Nov 14 19:07:39 2012 : Info: [peap] eaptls_process returned 7 
Wed Nov 14 19:07:39 2012 : Info: [peap] EAPTLS_OK
Wed Nov 14 19:07:39 2012 : Info: [peap] Session established.  Decoding tunneled attributes.
Wed Nov 14 19:07:39 2012 : Info: [peap] Peap state send tlv failure
Wed Nov 14 19:07:39 2012 : Info: [peap] Received EAP-TLV response.
Wed Nov 14 19:07:39 2012 : Info: [peap]  The users session was previously rejected: returning reject (again.)
Wed Nov 14 19:07:39 2012 : Info: [peap]  *** This means you need to read the PREVIOUS messages in the debug output
Wed Nov 14 19:07:39 2012 : Info: [peap]  *** to find out the reason why the user was rejected.
Wed Nov 14 19:07:39 2012 : Info: [peap]  *** Look for "reject" or "fail".  Those earlier messages will tell you.
Wed Nov 14 19:07:39 2012 : Info: [peap]  *** what went wrong, and how to fix the problem.
Wed Nov 14 19:07:39 2012 : Info: [eap] Handler failed in EAP/peap
Wed Nov 14 19:07:39 2012 : Info: [eap] Failed in EAP select
Wed Nov 14 19:07:39 2012 : Info: ++[eap] returns invalid
Wed Nov 14 19:07:39 2012 : Info: Failed to authenticate the user.
Wed Nov 14 19:07:39 2012 : Auth: Login incorrect: [remy/<via Auth-Type = EAP>] (from client remywifi port 0 cli A0-0B-BA-D6-63-BE)
Wed Nov 14 19:07:39 2012 : Info: Using Post-Auth-Type Reject
Wed Nov 14 19:07:39 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default
Wed Nov 14 19:07:39 2012 : Info: +- entering group REJECT {...}
Wed Nov 14 19:07:39 2012 : Info: [attr_filter.access_reject] 	expand: %{User-Name} -> remy
Wed Nov 14 19:07:39 2012 : Debug: attr_filter: Matched entry DEFAULT at line 11
Wed Nov 14 19:07:39 2012 : Info: ++[attr_filter.access_reject] returns updated
Wed Nov 14 19:07:39 2012 : Info: Delaying reject of request 18 for 1 seconds
Wed Nov 14 19:07:39 2012 : Debug: Going to the next request
Wed Nov 14 19:07:39 2012 : Debug: Waking up in 0.6 seconds.
rad_recv: Access-Request packet from host 192.168.2.10 port 3079, id=39, length=217
Wed Nov 14 19:07:40 2012 : Info: Waiting to send Access-Reject to client remywifi port 3079 - ID: 39
Wed Nov 14 19:07:40 2012 : Debug: Waking up in 0.1 seconds.
Wed Nov 14 19:07:40 2012 : Info: Cleaning up request 0 ID 22 with timestamp +105
Wed Nov 14 19:07:41 2012 : Info: Sending delayed reject for request 12
Sending Access-Reject of id 17 to 192.168.2.10 port 3079
Wed Nov 14 19:07:41 2012 : Info: Cleaning up request 1 ID 23 with timestamp +105
Wed Nov 14 19:07:41 2012 : Info: Cleaning up request 2 ID 24 with timestamp +105
Wed Nov 14 19:07:41 2012 : Info: Cleaning up request 3 ID 25 with timestamp +105
Wed Nov 14 19:07:41 2012 : Info: Cleaning up request 4 ID 26 with timestamp +105
Wed Nov 14 19:07:41 2012 : Info: Sending delayed reject for request 18
Sending Access-Reject of id 39 to 192.168.2.10 port 3079
	EAP-Message = 0x04090004
	Message-Authenticator = 0x00000000000000000000000000000000
Wed Nov 14 19:07:41 2012 : Info: Cleaning up request 5 ID 27 with timestamp +105
Wed Nov 14 19:07:41 2012 : Info: Cleaning up request 6 ID 28 with timestamp +105
Wed Nov 14 19:07:41 2012 : Info: Cleaning up request 7 ID 29 with timestamp +105
Wed Nov 14 19:07:41 2012 : Info: Cleaning up request 8 ID 30 with timestamp +105
Wed Nov 14 19:07:41 2012 : Debug: Waking up in 2.0 seconds.
Wed Nov 14 19:07:44 2012 : Info: Cleaning up request 9 ID 31 with timestamp +109
Wed Nov 14 19:07:44 2012 : Info: Cleaning up request 10 ID 32 with timestamp +109
Wed Nov 14 19:07:44 2012 : Debug: Waking up in 0.1 seconds.
Wed Nov 14 19:07:44 2012 : Info: Cleaning up request 11 ID 33 with timestamp +109
Wed Nov 14 19:07:44 2012 : Info: Cleaning up request 13 ID 34 with timestamp +109
Wed Nov 14 19:07:44 2012 : Info: Cleaning up request 14 ID 35 with timestamp +109
Wed Nov 14 19:07:44 2012 : Info: Cleaning up request 15 ID 36 with timestamp +109
Wed Nov 14 19:07:44 2012 : Info: Cleaning up request 16 ID 37 with timestamp +109
Wed Nov 14 19:07:44 2012 : Info: Cleaning up request 17 ID 38 with timestamp +109
Wed Nov 14 19:07:44 2012 : Debug: Waking up in 0.6 seconds.
Wed Nov 14 19:07:45 2012 : Info: Cleaning up request 12 ID 17 with timestamp +109
Wed Nov 14 19:07:45 2012 : Debug: Waking up in 0.3 seconds.
Wed Nov 14 19:07:45 2012 : Info: Cleaning up request 18 ID 39 with timestamp +109
Wed Nov 14 19:07:45 2012 : Info: Ready to process requests.

Hors ligne

#3 Le 14/11/2012, à 21:53

sabnac

Re : Point d'accès wifi et freeradius

Le problème est résolu enfin à moiter.

En effet, apparemment le fait que les mots de passes soient stockées en sha1 n'était pas compatible avec l'utilisation de peap cf:http://freeradius.1045715.n5.nabble.com/Wireless-WPA2-enterprise-Radius-authentication-td3236494.html

Cependant voila la question restante, comment faire pour pouvoir utiliser des mots de passes en hash plutôt qu'en clair sur le radius?
Si j'ai bien compris je dois utiliser une autre méthode qui encapsule la méthode PAP est-ce exact?

Merci,

Dernière modification par sabnac (Le 14/11/2012, à 21:53)

Hors ligne