Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1 2 3

#26 Le 30/07/2007, à 10:50

metalman

Re : j arrive pas a monter mon disque dur

avant que mon disque dur plante
j avai 2 partition C et D
c: windows
d: donnée

lorsque que j avai un probleme je formater que le C

lorsque que j ai utiliser partition magic pour formate el C , il a plante au demarrage, depuis xp voulé + booté
(ha oui j avai deja 2 windows xp dans le C)
j ai donc utiliser mon logiciel xp pour installer
mais là il avai trouve seulement q une partition  a formater , donc j ai rien fait et en + il avai mis au format fat alors qil ete au format ntfs

ensuite j ai installer ubuntu ,pouir pouvoire recuperer mes donnes mais il trouve pas le chemin d acces

apres je sais pas pkoi, mais maintenant y a 2 partions dans mon disque, c et d
donc le d fait environ 6 go et je l ai formater

j ai esseye pcinpecteur, il detecte bien les deux disque dur en physique

Hors ligne

#27 Le 30/07/2007, à 10:51

metalman

Re : j arrive pas a monter mon disque dur

alors q avant j avai 2 partition mais chacun avai environ 120 go etant donne que mon disque dur fai 250go

Hors ligne

#28 Le 30/07/2007, à 11:00

metalman

Re : j arrive pas a monter mon disque dur

lorsque que je regarde dans gestion de l ordinateur
gestion des disque

(disque dur ki a planté)
je voi mon disque dur 227 go ( partition principe ) mais pas de synteme de fichier
et je voi la partition E ( 6go)  au format ntfs

moi je veux recuperer les donnes des 227go

Hors ligne

#29 Le 30/07/2007, à 11:53

metalman

Re : j arrive pas a monter mon disque dur

j avai une idee, formater mon disque dur ( vista) ensuite installer xp et partition magic

et mettre mon disque dur au format ntfs grace a partition magic a moins ki est un autre logiciel pour le faire


q en penser vous?

Hors ligne

#30 Le 30/07/2007, à 13:01

jmin teroge

Re : j arrive pas a monter mon disque dur

on pense (moi en tout cas) que tu vas faire des bêtises.
Quand tu dis que tu vas mettre ton disque dur au format ntfs grace a partition magic, tu parles quand même pas du 227 Go sur lequel tu veux récupérer tes données, sinon oublies la manoeuvre ...
Fais plutôt le début de ce que tu as dit, c'est-à-dire :
sur un autre disque installe windows XP, puis installe partition magic et à partir du code erreur (s'il y en a un) fais une recherche sur google et si tu trouves rien copie le ici, mais surtout ne fais rien d'autre si tu tiens à tes données.

Hors ligne

#31 Le 30/07/2007, à 14:12

jiceel

Re : j arrive pas a monter mon disque dur

Je comprends pas du tout pourquoi formater le C: alors que partition magic et Windows sont dessus, donc en activité, normal qu'il boote plus et normal que les données soient effacées + plantage.
Quand à la partition D: si Ubuntu à été installée dessus et D: réduit à 6go + formaté ! je vois pas comment les données seraient toujours là.
Ou j'ai loupé quelque chose.
Si le D: n'avait pas été touché, il ferai toujours 120go et serai toujours là.
Lorsque tu as réinstallé Windows qui sait très bien partitionner et formater entre parenthèse (pourquoi utiliser partition magic) il n'y avait qu'une partition, mais de combien de go, et combien de go de libres pour créer une nouvelle partition.
Quand à Ubuntu tu n'aurais pas du l'installer, le lancer seulement du CD bootable.

Ubuntu 12.04 LTS 64 sur AMD 2x4600 Nvidia 7600GS 3go DDR2

Hors ligne

#32 Le 30/07/2007, à 15:22

metalman

Re : j arrive pas a monter mon disque dur

je pense que les donnes ki ete dans le D est reparti dans le C. toute maniere j ai que formater 6

Hors ligne

#33 Le 30/07/2007, à 17:12

metalman

Re : j arrive pas a monter mon disque dur

j ai trouver la solution grace a un logiciel!!!!!!!!!!!

http://www.01net.com/telecharger/windows/Utilitaire/disque_dur_cdrom_dvd/fiches/33527.html

il a trouver tout les fichiers!!!! dans mon disque dur ki avai planté!!

par contre il fau acheter l original pour sauvegarder mes donnes!!!!
je suis proche du but!!!

Hors ligne

#34 Le 30/07/2007, à 18:58

jmin teroge

Re : j arrive pas a monter mon disque dur

alléluia !
tu nous diras combien tu l'as payé.

Hors ligne

#35 Le 30/07/2007, à 19:04

metalman

Re : j arrive pas a monter mon disque dur

sa craint 90euros le logiciel, c valable a vie? ou 1 ans?

Hors ligne

#36 Le 30/07/2007, à 20:10

kimented

Re : j arrive pas a monter mon disque dur

http://www.commentcamarche.net/faq/sujet-309-recuperation-de-donnees-perdues

Regarde un peu ces logiciels, y'en a surement des gratuits...

27 mai 2017 Journée du Libre à Cappel
Le GULL de Cappel (57)

Hors ligne

#37 Le 30/07/2007, à 22:32

metalman

Re : j arrive pas a monter mon disque dur

moué aucun ne fonctionne

Hors ligne

#38 Le 30/07/2007, à 23:15

metalman

Re : j arrive pas a monter mon disque dur

d apres mes recherche la plus par fonctihttp://forum.crystalxp.net/index.php?showtopic=22941
onne pas sur vista!!

Hors ligne

#39 Le 30/07/2007, à 23:15

metalman

Re : j arrive pas a monter mon disque dur

d apres mes recherche la plus par ne fonctionne pas sur vista


http://forum.crystalxp.net/index.php?showtopic=22941

j ai le meme probleme

Hors ligne

#40 Le 30/07/2007, à 23:19

metalman

Re : j arrive pas a monter mon disque dur

finalemen trouver
http://fr.utilidades-utiles.com/telecharger-pc-inspector-file-recovery.html

Hors ligne

#41 Le 30/07/2007, à 23:23

metalman

Re : j arrive pas a monter mon disque dur

moue c parelle  il fonctionne pas

Hors ligne

#42 Le 31/07/2007, à 08:01

jiceel

Re : j arrive pas a monter mon disque dur

jiceel a écrit :

A tout hasard en dernier recours depuis Vista tu peux essayer ceci:
http://www.pcinspector.de/file_recovery/fr/welcome.htm
avec les 2 disques branchés et si lui ne voit rien c'est mort.

Il me semble que je t'avais déjà donné l'adresse de ce logiciel qui est le meilleur gratuit.
Attention sous Vista pour ce genre de logiciel il faut être en mode "administrateur"
Vista est plus compliqué à utiliser avec des outils système.

Ubuntu 12.04 LTS 64 sur AMD 2x4600 Nvidia 7600GS 3go DDR2

Hors ligne

#43 Le 31/07/2007, à 10:06

metalman

Re : j arrive pas a monter mon disque dur

oui et deja repondu

lorsque que je lance pcinpector
il me trouve bien mes deux disque dur (disque physique) mais je peux pas validé puisque c physique

si je mets une clé usb , il me le trouve en disque logique, et là je peux valider

ou  il fau le mettre en mode administrateur

Hors ligne

#44 Le 31/07/2007, à 18:05

metalman

Re : j arrive pas a monter mon disque dur

que faire?

Hors ligne

#45 Le 01/08/2007, à 14:29

metalman

Re : j arrive pas a monter mon disque dur

quelqun peu m aider?

Hors ligne

#46 Le 01/08/2007, à 20:04

jmin teroge

Re : j arrive pas a monter mon disque dur

Bonjour,

tu crois toujours que tu peux récupérer tes données ? Optimiste va !
Essaie avec linux.
Mets le disque avec vista en maitre sur la première nappe, mets ton disque avec tes données à récupérer en esclave toujours sur la première nappe, et mets un lecteur cd en maitre sur la seconde nappe. Puis lances l'installation d'ubuntu. Reviens-nous voir après.
Bien sur si tu tiens à ton vista oublies l'installation simple.

Hors ligne

#47 Le 01/08/2007, à 20:29

xelator

Re : j arrive pas a monter mon disque dur

metalman a écrit :

quelqun peu m'aider?

mais tu le fais exprès ? on peut pas t'aider si tu répond pas aux questions que les autres te posent !!!!!

alors pour résumer : va sur ubuntu (live cd ou install m'en fou) , tu va dans application> accessoires> terminal et la tu tapes :

sudo dmesg
puis
sudo fdisk -l

(tu tapes ton mot de passe , c'est normal si tu voit rien quand tu tapes ton pass et si c'est en live , y a pas de pass)

et tu colles ici les résultats des commandes

Dernière modification par xelator (Le 01/08/2007, à 21:49)

Hors ligne

#48 Le 01/08/2007, à 21:26

kimented

Re : j arrive pas a monter mon disque dur

Je crois qu'il ne comprend pas les questions...

27 mai 2017 Journée du Libre à Cappel
Le GULL de Cappel (57)

Hors ligne

#49 Le 02/08/2007, à 13:55

metalman64

Re : j arrive pas a monter mon disque dur

metalman@metalman-linux:~$ sudo dmesg
Password:
[17179569.184000] Linux version 2.6.15-28-386 (buildd@terranova) (gcc version 4. 0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Wed Jul 18 22:50:32 UTC 2007
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
[17179569.184000]  BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[17179569.184000] 1151MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 524208
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 294832 pages, LIFO batch:31
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x0 00f91c0
[17179569.184000] ACPI: RSDT (v001 A_M_I  OEMRSDT  0x05000728 MSFT 0x00000097) @  0x7ffb0000
[17179569.184000] ACPI: FADT (v002 A M I  OEMFACP  0x12000601 MSFT 0x00000097) @  0x7ffb0200
[17179569.184000] ACPI: MADT (v001 A_M_I  OEMAPIC  0x05000728 MSFT 0x00000097) @  0x7ffb0390
[17179569.184000] ACPI: MCFG (v001 A_M_I  OEMMCFG  0x05000728 MSFT 0x00000097) @  0x7ffb0400
[17179569.184000] ACPI: OEMB (v001 A_M_I  AMI_OEM  0x05000728 MSFT 0x00000097) @  0x7ffc0040
[17179569.184000] ACPI: DSDT (v001  C94GD C94GD181 0x00000181 INTL 0x02002026) @  0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:15 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 6:15 APIC version 20
[17179569.184000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
[17179569.184000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[17179569.184000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:7 ed00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 1861.783 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.572000] Dentry cache hash table entries: 131072 (order: 7, 524288 byte s)
[17179572.572000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.640000] Memory: 2068400k/2096832k available (1977k kernel code, 27140k  reserved, 605k data, 288k init, 1179328k highmem)
[17179572.640000] Checking if this processor honours the WP bit even in supervis or mode... Ok.
[17179572.720000] Calibrating delay using timer specific routine.. 3727.14 BogoM IPS (lpj=7454294)
[17179572.720000] Security Framework v1.0.0 initialized
[17179572.720000] SELinux:  Disabled at boot.
[17179572.720000] Mount-cache hash table entries: 512
[17179572.720000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001
[17179572.720000] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 0 0000000 0000e3bd 00000000 00000001
[17179572.720000] monitor/mwait feature present.
[17179572.720000] using mwait in idle threads.
[17179572.720000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179572.720000] CPU: L2 cache: 2048K
[17179572.720000] CPU: After all inits, caps: bfebfbff 20000000 00000000 0000004 0 0000e3bd 00000000 00000001
[17179572.720000] mtrr: v2.0 (20020519)
[17179572.720000] CPU: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 06
[17179572.720000] Enabling fast FPU save and restore... done.
[17179572.720000] Enabling unmasked SIMD FPU exception support... done.
[17179572.720000] Checking 'hlt' instruction... OK.
[17179572.736000] checking if image is initramfs... it is
[17179573.240000] Freeing initrd memory: 6616k freed
[17179573.244000] ACPI: Looking for DSDT ... not found!
[17179573.244000] ENABLING IO-APIC IRQs
[17179573.244000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179573.388000] NET: Registered protocol family 16
[17179573.388000] EISA bus registered
[17179573.388000] ACPI: bus type pci registered
[17179573.388000] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[17179573.388000] PCI: Using MMCONFIG
[17179573.388000] ACPI: Subsystem revision 20051216
[17179573.392000] ACPI: Interpreter enabled
[17179573.392000] ACPI: Using IOAPIC for interrupt routing
[17179573.392000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.392000] PCI: Probing PCI hardware (bus 00)
[17179573.396000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179573.396000] Boot video device is 0000:03:00.0
[17179573.396000] PCI: Transparent bridge - 0000:00:1e.0
[17179573.396000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.396000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[17179573.396000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[17179573.400000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[17179573.400000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[17179573.404000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 1 5)
[17179573.404000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 1 5)
[17179573.404000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 1 5)
[17179573.404000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 1 5)
[17179573.404000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15 ) *0, disabled.
[17179573.404000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15 ) *0, disabled.
[17179573.404000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 1 5)
[17179573.404000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *1 5)
[17179573.404000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.404000] pnp: PnP ACPI init
[17179573.408000] pnp: PnP ACPI: found 16 devices
[17179573.408000] PnPBIOS: Disabled by ACPI PNP
[17179573.408000] PCI: Using ACPI for IRQ routing
[17179573.408000] PCI: If a device doesn't work, try "pci=routeirq".  If it help s, post a report
[17179573.416000] pnp: 00:0d: ioport range 0x290-0x29f has been reserved
[17179573.416000] PCI: Bridge: 0000:00:01.0
[17179573.416000]   IO window: e000-efff
[17179573.416000]   MEM window: fc000000-feafffff
[17179573.416000]   PREFETCH window: d0000000-dfffffff
[17179573.416000] PCI: Bridge: 0000:00:1c.0
[17179573.416000]   IO window: disabled.
[17179573.416000]   MEM window: disabled.
[17179573.416000]   PREFETCH window: cff00000-cfffffff
[17179573.416000] PCI: Bridge: 0000:00:1c.1
[17179573.416000]   IO window: d000-dfff
[17179573.416000]   MEM window: fbf00000-fbffffff
[17179573.416000]   PREFETCH window: disabled.
[17179573.416000] PCI: Bridge: 0000:00:1e.0
[17179573.416000]   IO window: disabled.
[17179573.416000]   MEM window: feb00000-febfffff
[17179573.416000]   PREFETCH window: disabled.
[17179573.416000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179573.416000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179573.416000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179573.416000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179573.416000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 177
[17179573.416000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179573.416000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179573.416000] audit: initializing netlink socket (disabled)
[17179573.416000] audit(1186065775.416:1): initialized
[17179573.416000] highmem bounce pool size: 64 pages
[17179573.416000] VFS: Disk quotas dquot_6.5.1
[17179573.416000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.416000] Initializing Cryptographic API
[17179573.416000] io scheduler noop registered
[17179573.416000] io scheduler anticipatory registered
[17179573.416000] io scheduler deadline registered
[17179573.416000] io scheduler cfq registered
[17179573.416000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179573.416000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179573.416000] assign_interrupt_mode Found MSI capability
[17179573.416000] Allocate Port Service[pcie00]
[17179573.416000] Allocate Port Service[pcie03]
[17179573.416000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179573.416000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179573.416000] assign_interrupt_mode Found MSI capability
[17179573.416000] Allocate Port Service[pcie00]
[17179573.416000] Allocate Port Service[pcie02]
[17179573.416000] Allocate Port Service[pcie03]
[17179573.416000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 177
[17179573.416000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179573.416000] assign_interrupt_mode Found MSI capability
[17179573.416000] Allocate Port Service[pcie00]
[17179573.416000] Allocate Port Service[pcie02]
[17179573.416000] Allocate Port Service[pcie03]
[17179573.416000] isapnp: Scanning for PnP cards...
[17179573.772000] isapnp: No Plug & Play device found
[17179573.784000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179573.784000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179573.784000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179573.784000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.784000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ shar ing enabled
[17179573.784000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.784000] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.788000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 b locksize
[17179573.788000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.788000] ide: Assuming 33MHz system bus speed for PIO modes; override w ith idebus=xx
[17179573.788000] mice: PS/2 mouse device common for all mice
[17179573.788000] EISA: Probing bus 0 at eisa.0
[17179573.788000] EISA: Detected 0 cards.
[17179573.788000] NET: Registered protocol family 2
[17179573.824000] IP route cache hash table entries: 131072 (order: 7, 524288 by tes)
[17179573.824000] TCP established hash table entries: 524288 (order: 9, 2097152 bytes)
[17179573.824000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179573.824000] TCP: Hash tables configured (established 524288 bind 65536)
[17179573.824000] TCP reno registered
[17179573.824000] TCP bic registered
[17179573.824000] NET: Registered protocol family 1
[17179573.824000] NET: Registered protocol family 8
[17179573.824000] NET: Registered protocol family 20
[17179573.824000] Using IPI Shortcut mode
[17179573.824000] ACPI wakeup devices:
[17179573.824000] P0P2 P0P1 PS2K UAR1 EUSB MC97 HDAC P0P4 P0P5 P0P6 P0P7 P0P8 P0 P9 USB0 USB1 USB2 USB3
[17179573.824000] ACPI: (supports S0 S1 S3 S4 S5)
[17179573.824000] Freeing unused kernel memory: 288k freed
[17179573.836000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179573.860000] vga16fb: initializing
[17179573.860000] vga16fb: mapped to 0xc00a0000
[17179574.000000] Console: switching to colour frame buffer device 80x25
[17179574.000000] fb0: VGA16 VGA frame buffer device
[17179575.112000] Capability LSM initialized
[17179575.540000] ICH7: IDE controller at PCI slot 0000:00:1f.1
[17179575.540000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217
[17179575.540000] ICH7: chipset revision 1
[17179575.540000] ICH7: not 100% native mode: will probe irqs later
[17179575.540000]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb :DMA
[17179575.540000] Probing IDE interface ide0...
[17179576.556000] hdb: ATAPI DVD DUAL 4XMax, ATAPI CD/DVD-ROM drive
[17179576.612000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.616000] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA (33)
[17179576.616000] Uniform CD-ROM driver Revision: 3.20
[17179576.640000] SCSI subsystem initialized
[17179576.644000] ACPI: bus type scsi registered
[17179576.644000] libata version 1.20 loaded.
[17179576.644000] ata_piix 0000:00:1f.2: version 1.05
[17179576.644000] ata_pci_init_one: pci_dev class+intf: 0x1018f
[17179576.644000] ata_pci_init_one: NO_LEGACY == 0
[17179576.644000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 225
[17179576.644000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179576.644000] ata1: PATA max UDMA/133 cmd 0xC400 ctl 0xC082 bmdma 0xB880 irq  225
[17179576.644000] ata2: PATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB888 irq  225
[17179577.860000] ata1: disabling port
[17179577.860000] scsi0 : ata_piix
[17179578.024000] ata2: dev 0 cfg 00:0040 49:2f00 82:746b 83:7f01 84:4023 85:746 8 86:bc01 87:4023 88:20ff 93:0000
[17179578.024000] ata2: dev 0 ATA-7, max UDMA7, 488397168 sectors: LBA48
[17179578.024000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe7fa0
[17179578.056000] ata2: dev 0 configured for UDMA/133
[17179578.056000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe7fa0
[17179578.060000] scsi1 : ata_piix
[17179578.060000]   Vendor: ATA       Model: SAMSUNG SP2504C   Rev: VT10
[17179578.060000]   Type:   Direct-Access                      ANSI SCSI revisio n: 05
[17179578.064000] Driver 'sd' needs updating - please use bus_type methods
[17179578.064000] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[17179578.064000] SCSI device sda: drive cache: write back
[17179578.068000] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[17179578.068000] SCSI device sda: drive cache: write back
[17179578.068000]  sda: sda1 sda2 < sda5 >
[17179578.092000] sd 1:0:0:0: Attached scsi disk sda
[17179578.248000] usbcore: registered new driver usbfs
[17179578.248000] usbcore: registered new driver hub
[17179578.252000] USB Universal Host Controller Interface driver v2.3
[17179578.252000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
[17179578.252000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179578.252000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179578.252000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus nu mber 1
[17179578.252000] uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000c480
[17179578.252000] hub 1-0:1.0: USB hub found
[17179578.252000] hub 1-0:1.0: 2 ports detected
[17179578.356000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 225
[17179578.356000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179578.356000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179578.356000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus nu mber 2
[17179578.356000] uhci_hcd 0000:00:1d.1: irq 225, io base 0x0000c800
[17179578.356000] hub 2-0:1.0: USB hub found
[17179578.356000] hub 2-0:1.0: 2 ports detected
[17179578.460000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
[17179578.460000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179578.460000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179578.460000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus nu mber 3
[17179578.460000] uhci_hcd 0000:00:1d.2: irq 217, io base 0x0000c880
[17179578.460000] hub 3-0:1.0: USB hub found
[17179578.460000] hub 3-0:1.0: 2 ports detected
[17179578.564000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[17179578.564000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179578.564000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179578.564000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus nu mber 4
[17179578.564000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000cc00
[17179578.564000] hub 4-0:1.0: USB hub found
[17179578.564000] hub 4-0:1.0: 2 ports detected
[17179578.596000] usb 1-2: new low speed USB device using uhci_hcd and address 2
[17179578.668000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
[17179578.668000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179578.668000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179578.668000] ehci_hcd 0000:00:1d.7: debug port 1
[17179578.668000] PCI: cache line size of 32 is not supported by device 0000:00: 1d.7
[17179578.668000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus nu mber 5
[17179578.668000] ehci_hcd 0000:00:1d.7: irq 233, io mem 0xfbefbc00
[17179578.672000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 D ec 2004
[17179578.672000] hub 5-0:1.0: USB hub found
[17179578.672000] hub 5-0:1.0: 8 ports detected
[17179578.788000] Probing IDE interface ide1...
[17179579.120000] usb 1-2: device not accepting address 2, error -71
[17179579.364000] Attempting manual resume
[17179579.392000] EXT3-fs: mounted filesystem with ordered data mode.
[17179579.404000] kjournald starting.  Commit interval 5 seconds
[17179579.912000] usb 1-2: new low speed USB device using uhci_hcd and address 4
[17179580.324000] usb 3-1: new full speed USB device using uhci_hcd and address 2
[17179586.408000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[17179586.996000] Linux agpgart interface v0.101 (c) Dave Jones
[17179587.000000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179587.004000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179587.016000] agpgart: Detected an Intel 945G Chipset.
[17179587.028000] agpgart: AGP aperture is 256M @ 0x0
[17179587.132000] hw_random: RNG not detected
[17179587.188000] nvidia: module license 'NVIDIA' taints kernel.
[17179587.192000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179587.192000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[17179587.192000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8776  Mon Oc t 16 21:56:04 PDT 2006
[17179587.544000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179587.544000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179587.780000] Real Time Clock Driver v1.12
[17179587.888000] usbcore: registered new driver hiddev
[17179587.896000] input: PC Speaker as /class/input/input1
[17179587.908000] input: ARROW STRONG USB Mouse as /class/input/input2
[17179587.908000] input: USB HID v1.00 Mouse [ARROW STRONG USB Mouse] on usb-000 0:00:1d.0-2
[17179587.908000] usbcore: registered new driver usbhid
[17179587.908000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179587.928000] hda_codec: Unknown model for ALC883, trying auto-probe from BI OS...
[17179588.120000] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 50
[17179588.120000] rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com
[17179588.120000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179588.120000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[17179588.120000] eth0: Identified chip type is 'RTL8168B/8111B'.
[17179588.120000] eth0: r10001.02, the Linux device driver for Realtek Ethernet Controllers at 0xd800, 00:13:8f:bb:ad:e0, IRQ 177
[17179588.120000] eth0: Auto-negotiation Enabled.
[17179588.208000] Floppy drive(s): fd0 is 1.44M
[17179588.272000] parport: PnPBIOS parport detected.
[17179588.272000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRIST ATE,COMPAT,ECP,DMA]
[17179588.272000] FDC 0 is a post-1991 82077
[17179588.592000] usbcore: registered new driver snd-usb-audio
[17179589.548000] ts: Compaq touchscreen protocol output
[17179589.772000] eth0: 100Mbps Full-duplex operation.
[17179589.772000] Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Ada pter
[17179589.772000] Driver version:1.02
[17179589.772000] Released date:2006/02/23
[17179589.772000] Link Status:Linked
[17179589.772000] Link Speed:100Mbps
[17179589.772000] Duplex mode:Full-Duplex
[17179589.772000] I/O Base:0xD800(I/O port)
[17179589.772000] IRQ:177
[17179590.072000] lp0: using parport0 (interrupt-driven).
[17179590.116000] Unable to find swap-space signature
[17179590.252000] EXT3 FS on sda1, internal journal
[17179590.364000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179590.364000] md: bitmap version 4.39
[17179590.788000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@ redhat.com
[17179591.324000] NET: Registered protocol family 17
[17179591.388000] cdrom: open failed.
[17179591.664000] Unable to find swap-space signature
[17179596.992000] NET: Registered protocol family 10
[17179596.992000] lo: Disabled Privacy Extensions
[17179596.992000] IPv6 over IPv4 tunneling driver
[17179598.216000] ACPI: Power Button (FF) [PWRF]
[17179598.216000] ACPI: Power Button (CM) [PWRB]
[17179598.284000] ibm_acpi: ec object not found
[17179598.308000] pcc_acpi: loading...
[17179604.592000] ppdev: user-space parallel port driver
[17179604.824000] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[17179604.824000] apm: overridden by ACPI.
[17179605.668000] Bluetooth: Core ver 2.8
[17179605.668000] NET: Registered protocol family 31
[17179605.668000] Bluetooth: HCI device and connection manager initialized
[17179605.668000] Bluetooth: HCI socket layer initialized
[17179605.712000] Bluetooth: L2CAP ver 2.8
[17179605.712000] Bluetooth: L2CAP socket layer initialized
[17179605.716000] Bluetooth: RFCOMM socket layer initialized
[17179605.716000] Bluetooth: RFCOMM TTY layer initialized
[17179605.716000] Bluetooth: RFCOMM ver 1.7
[17179607.736000] eth0: no IPv6 routers present
metalman@metalman-linux:~$ sudo fdisk -l

Disque /dev/sda: 250.0 Go, 250059350016 octets
255 têtes, 63 secteurs/piste, 30401 cylindres
Unités = cylindres de 16065 * 512 = 8225280 octets

Périphérique Amorce    Début         Fin      Blocs    Id  Système
/dev/sda1   *           1       29644   238115398+  83  Linux
/dev/sda2           29645       30401     6080602+   5  Extended
/dev/sda5           29645       30401     6079488    7  HPFS/NTFS
metalman@metalman-linux:~$ [17179569.184000] Linux version 2.6.15-28-386 (buildd@terranova) (gcc version 4. 0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Wed Jul 18 22:50:32 U

#50 Le 02/08/2007, à 19:47

jmin teroge

Re : j arrive pas a monter mon disque dur

envoies le retour de

cat  /etc/fstab

et tant qu'on y est celui de

mount

Hors ligne

Pages : 1 2 3