- Accueil
- » Forum
- » XFCE
- » Bureau modifié
Pages : 1
#1 Le 06/09/2012, à 08:17
- roger3000
Bureau modifié
Bonjour,
J'ai récemment installé LinuxMint Debian Edition XFCE sur un netbook.
Après avoir configuré tout ce que je souhaitais, j'ai simplement utilisé le pc pendant 1 petite semaine.
Hier, apres avoir fermé une fenetre Chrome, je me suis rendu compte que le bureau avait completement été modifié: icones normalement petites devenues géantes, ainsi que leur titre, et pas d'icones de volumes amovibles.
J'ai tenté un redémarrage, en notifiant la non sauvegarde de la session.
Le bureau a d'abord été affiché tel que je l'avais paramétré, puis, au bout de quelques secondes, une fenetre Thunar s'est ouverte et le bureau a de nouveau été modifié...
Ca dépasse mes compétences...
Merci pour votre aide! 
Quelques infos supplémentaires:
$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
05:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller $ gedit /var/log/Xorg.0.log
[ 27.840]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 27.840] X Protocol Version 11, Revision 0
[ 27.840] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[ 27.840] Current Operating System: Linux manu-laptop 3.2.0-2-486 #1 Mon Mar 5 00:55:40 UTC 2012 i686
[ 27.840] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-486 root=UUID=e5628396-e3ef-4ed2-a174-0a9c48131900 ro quiet
[ 27.840] Build Date: 05 March 2012 04:16:09AM
[ 27.840] xorg-server 2:1.11.4-1 (Cyril Brulebois <kibi@debian.org>)
[ 27.840] Current version of pixman: 0.24.4
[ 27.840] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.840] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.841] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 6 08:53:23 2012
[ 27.889] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.943] (==) No Layout section. Using the first Screen section.
[ 27.943] (==) No screen section available. Using defaults.
[ 27.943] (**) |-->Screen "Default Screen Section" (0)
[ 27.943] (**) | |-->Monitor "<default monitor>"
[ 27.955] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 27.955] (==) Automatically adding devices
[ 27.955] (==) Automatically enabling devices
[ 28.014] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 28.014] Entry deleted from font path.
[ 28.030] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 28.030] Entry deleted from font path.
[ 28.030] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 28.030] Entry deleted from font path.
[ 28.044] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 28.044] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 28.044] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 28.068] (II) Loader magic: 0xb77b4580
[ 28.068] (II) Module ABI versions:
[ 28.068] X.Org ANSI C Emulation: 0.4
[ 28.068] X.Org Video Driver: 11.0
[ 28.068] X.Org XInput driver : 13.0
[ 28.068] X.Org Server Extension : 6.0
[ 28.070] (--) PCI:*(0:0:2:0) 8086:a011:144d:c08c rev 2, Mem @ 0xf0300000/524288, 0xd0000000/268435456, 0xf0000000/1048576, I/O @ 0x000018d0/8
[ 28.070] (--) PCI: (0:0:2:1) 8086:a012:144d:c08c rev 2, Mem @ 0xf0380000/524288
[ 28.071] (II) Open ACPI successful (/var/run/acpid.socket)
[ 28.071] (II) LoadModule: "extmod"
[ 28.105] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 28.115] (II) Module extmod: vendor="X.Org Foundation"
[ 28.115] compiled for 1.11.4, module version = 1.0.0
[ 28.116] Module class: X.Org Server Extension
[ 28.116] ABI class: X.Org Server Extension, version 6.0
[ 28.116] (II) Loading extension SELinux
[ 28.116] (II) Loading extension MIT-SCREEN-SAVER
[ 28.116] (II) Loading extension XFree86-VidModeExtension
[ 28.116] (II) Loading extension XFree86-DGA
[ 28.116] (II) Loading extension DPMS
[ 28.116] (II) Loading extension XVideo
[ 28.116] (II) Loading extension XVideo-MotionCompensation
[ 28.116] (II) Loading extension X-Resource
[ 28.116] (II) LoadModule: "dbe"
[ 28.116] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.117] (II) Module dbe: vendor="X.Org Foundation"
[ 28.117] compiled for 1.11.4, module version = 1.0.0
[ 28.117] Module class: X.Org Server Extension
[ 28.117] ABI class: X.Org Server Extension, version 6.0
[ 28.117] (II) Loading extension DOUBLE-BUFFER
[ 28.117] (II) LoadModule: "glx"
[ 28.118] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 28.127] (II) Module glx: vendor="X.Org Foundation"
[ 28.127] compiled for 1.11.4, module version = 1.0.0
[ 28.128] ABI class: X.Org Server Extension, version 6.0
[ 28.128] (==) AIGLX enabled
[ 28.128] (II) Loading extension GLX
[ 28.128] (II) LoadModule: "record"
[ 28.128] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 28.129] (II) Module record: vendor="X.Org Foundation"
[ 28.129] compiled for 1.11.4, module version = 1.13.0
[ 28.129] Module class: X.Org Server Extension
[ 28.129] ABI class: X.Org Server Extension, version 6.0
[ 28.129] (II) Loading extension RECORD
[ 28.129] (II) LoadModule: "dri"
[ 28.130] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 28.142] (II) Module dri: vendor="X.Org Foundation"
[ 28.142] compiled for 1.11.4, module version = 1.0.0
[ 28.142] ABI class: X.Org Server Extension, version 6.0
[ 28.142] (II) Loading extension XFree86-DRI
[ 28.142] (II) LoadModule: "dri2"
[ 28.142] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 28.143] (II) Module dri2: vendor="X.Org Foundation"
[ 28.143] compiled for 1.11.4, module version = 1.2.0
[ 28.143] ABI class: X.Org Server Extension, version 6.0
[ 28.143] (II) Loading extension DRI2
[ 28.143] (==) Matched intel as autoconfigured driver 0
[ 28.144] (==) Matched vesa as autoconfigured driver 1
[ 28.144] (==) Matched fbdev as autoconfigured driver 2
[ 28.144] (==) Assigned the driver to the xf86ConfigLayout
[ 28.144] (II) LoadModule: "intel"
[ 28.229] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 28.301] (II) Module intel: vendor="X.Org Foundation"
[ 28.301] compiled for 1.11.3.901, module version = 2.18.0
[ 28.301] Module class: X.Org Video Driver
[ 28.301] ABI class: X.Org Video Driver, version 11.0
[ 28.301] (II) LoadModule: "vesa"
[ 28.302] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 28.314] (II) Module vesa: vendor="X.Org Foundation"
[ 28.314] compiled for 1.11.0, module version = 2.3.0
[ 28.314] Module class: X.Org Video Driver
[ 28.314] ABI class: X.Org Video Driver, version 11.0
[ 28.315] (II) LoadModule: "fbdev"
[ 28.315] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 28.316] (II) Module fbdev: vendor="X.Org Foundation"
[ 28.316] compiled for 1.11.0, module version = 0.4.2
[ 28.316] ABI class: X.Org Video Driver, version 11.0
[ 28.316] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 28.317] (II) VESA: driver for VESA chipsets: vesa
[ 28.317] (II) FBDEV: driver for framebuffer: fbdev
[ 28.317] (++) using VT number 7
[ 28.330] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 28.330] (WW) Falling back to old probe method for vesa
[ 28.330] (WW) Falling back to old probe method for fbdev
[ 28.472] (II) Loading sub module "fbdevhw"
[ 28.472] (II) LoadModule: "fbdevhw"
[ 28.473] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 28.494] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 28.495] compiled for 1.11.4, module version = 0.0.2
[ 28.495] ABI class: X.Org Video Driver, version 11.0
[ 28.495] drmOpenDevice: node name is /dev/dri/card0
[ 28.495] drmOpenDevice: open result is 9, (OK)
[ 28.495] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 28.495] drmOpenDevice: node name is /dev/dri/card0
[ 28.495] drmOpenDevice: open result is 9, (OK)
[ 28.495] drmOpenByBusid: drmOpenMinor returns 9
[ 28.495] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 28.495] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 28.495] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 28.495] (==) intel(0): RGB weight 888
[ 28.496] (==) intel(0): Default visual is TrueColor
[ 28.496] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[ 28.496] (--) intel(0): Chipset: "Pineview GM"
[ 28.496] (**) intel(0): Relaxed fencing enabled
[ 28.496] (**) intel(0): Wait on SwapBuffers? enabled
[ 28.496] (**) intel(0): Triple buffering? enabled
[ 28.496] (**) intel(0): Framebuffer tiled
[ 28.496] (**) intel(0): Pixmaps tiled
[ 28.496] (**) intel(0): 3D buffers tiled
[ 28.496] (**) intel(0): SwapBuffers wait enabled
[ 28.496] (==) intel(0): video overlay key set to 0x101fe
[ 28.496] (II) intel(0): Output LVDS1 has no monitor section
[ 28.499] (II) intel(0): found backlight control interface /sys/class/backlight/samsung
[ 28.528] (II) intel(0): Output VGA1 has no monitor section
[ 28.528] (II) intel(0): EDID for output LVDS1
[ 28.528] (II) intel(0): Manufacturer: SEC Model: 3030 Serial#: 0
[ 28.528] (II) intel(0): Year: 2010 Week: 0
[ 28.528] (II) intel(0): EDID Version: 1.3
[ 28.528] (II) intel(0): Digital Display Input
[ 28.528] (II) intel(0): Max Image Size [cm]: horiz.: 22 vert.: 13
[ 28.528] (II) intel(0): Gamma: 2.20
[ 28.528] (II) intel(0): No DPMS capabilities specified
[ 28.528] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 28.528] (II) intel(0): First detailed timing is preferred mode
[ 28.528] (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.310 greenY: 0.560
[ 28.528] (II) intel(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
[ 28.528] (II) intel(0): Manufacturer's mask: 0
[ 28.528] (II) intel(0): Supported detailed timing:
[ 28.528] (II) intel(0): clock: 54.2 MHz Image Size: 223 x 125 mm
[ 28.529] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 28.529] (II) intel(0): v_active: 600 v_sync: 603 v_sync_end 609 v_blanking: 670 v_border: 0
[ 28.529] (II) intel(0): Unknown vendor-specific block f
[ 28.529] (II) intel(0): SAMSUNG
[ 28.529] (II) intel(0): LTN101NT06101
[ 28.529] (II) intel(0): EDID (in hex):
[ 28.529] (II) intel(0): 00ffffffffffff004ca3303000000000
[ 28.529] (II) intel(0): 0014010380160d780a859599574f8f26
[ 28.529] (II) intel(0): 21505400000001010101010101010101
[ 28.529] (II) intel(0): 0101010101012c150040415846201888
[ 28.529] (II) intel(0): 3600df7d000000190000000f00000000
[ 28.529] (II) intel(0): 00000000002387026400000000fe0053
[ 28.529] (II) intel(0): 414d53554e470a2020202020000000fe
[ 28.529] (II) intel(0): 004c544e3130314e54303631303100cf
[ 28.529] (II) intel(0): EDID vendor "SEC", prod id 12336
[ 28.529] (II) intel(0): Printing DDC gathered Modelines:
[ 28.529] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 28.530] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 28.530] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 28.530] (II) intel(0): Printing probed modes for output LVDS1
[ 28.530] (II) intel(0): Modeline "1024x600"x60.2 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 28.531] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 28.531] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 28.531] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 28.560] (II) intel(0): EDID for output VGA1
[ 28.560] (II) intel(0): Output LVDS1 connected
[ 28.560] (II) intel(0): Output VGA1 disconnected
[ 28.560] (II) intel(0): Using exact sizes for initial modes
[ 28.560] (II) intel(0): Output LVDS1 using initial mode 1024x600
[ 28.560] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 28.560] (II) intel(0): Kernel page flipping support detected, enabling
[ 28.560] (**) intel(0): Display dimensions: (220, 130) mm
[ 28.560] (**) intel(0): DPI set to (118, 117)
[ 28.560] (II) Loading sub module "fb"
[ 28.560] (II) LoadModule: "fb"
[ 28.571] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 28.583] (II) Module fb: vendor="X.Org Foundation"
[ 28.583] compiled for 1.11.4, module version = 1.0.0
[ 28.583] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.583] (II) Loading sub module "dri2"
[ 28.583] (II) LoadModule: "dri2"
[ 28.584] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 28.584] (II) Module dri2: vendor="X.Org Foundation"
[ 28.584] compiled for 1.11.4, module version = 1.2.0
[ 28.584] ABI class: X.Org Server Extension, version 6.0
[ 28.584] (II) UnloadModule: "vesa"
[ 28.584] (II) Unloading vesa
[ 28.584] (II) UnloadModule: "fbdev"
[ 28.584] (II) Unloading fbdev
[ 28.584] (II) UnloadModule: "fbdevhw"
[ 28.584] (II) Unloading fbdevhw
[ 28.584] (==) Depth 24 pixmap format is 32 bpp
[ 28.584] (II) intel(0): [DRI2] Setup complete
[ 28.584] (II) intel(0): [DRI2] DRI driver: i915
[ 28.584] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[ 28.607] (II) UXA(0): Driver registered support for the following operations:
[ 28.607] (II) solid
[ 28.607] (II) copy
[ 28.607] (II) composite (RENDER acceleration)
[ 28.607] (II) put_image
[ 28.607] (II) get_image
[ 28.607] (==) intel(0): Backing store disabled
[ 28.607] (==) intel(0): Silken mouse enabled
[ 28.607] (II) intel(0): Initializing HW Cursor
[ 28.620] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 28.630] (==) intel(0): DPMS enabled
[ 28.630] (==) intel(0): Intel XvMC decoder disabled
[ 28.630] (II) intel(0): Set up textured video
[ 28.630] (II) intel(0): Set up overlay video
[ 28.630] (II) intel(0): direct rendering: DRI2 Enabled
[ 28.630] (==) intel(0): hotplug detection: "enabled"
[ 28.631] (--) RandR disabled
[ 28.631] (II) Initializing built-in extension Generic Event Extension
[ 28.631] (II) Initializing built-in extension SHAPE
[ 28.631] (II) Initializing built-in extension MIT-SHM
[ 28.631] (II) Initializing built-in extension XInputExtension
[ 28.631] (II) Initializing built-in extension XTEST
[ 28.631] (II) Initializing built-in extension BIG-REQUESTS
[ 28.631] (II) Initializing built-in extension SYNC
[ 28.631] (II) Initializing built-in extension XKEYBOARD
[ 28.631] (II) Initializing built-in extension XC-MISC
[ 28.631] (II) Initializing built-in extension SECURITY
[ 28.631] (II) Initializing built-in extension XINERAMA
[ 28.631] (II) Initializing built-in extension XFIXES
[ 28.631] (II) Initializing built-in extension RENDER
[ 28.631] (II) Initializing built-in extension RANDR
[ 28.631] (II) Initializing built-in extension COMPOSITE
[ 28.631] (II) Initializing built-in extension DAMAGE
[ 28.631] (II) SELinux: Disabled on system
[ 28.941] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 28.942] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 28.942] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 28.942] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 28.942] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 28.942] (II) AIGLX: Loaded and initialized i915
[ 28.942] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 28.944] (II) intel(0): Setting screen physical size to 270 x 158
[ 30.621] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 30.621] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.621] (II) LoadModule: "evdev"
[ 30.622] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.717] (II) Module evdev: vendor="X.Org Foundation"
[ 30.717] compiled for 1.11.0, module version = 2.6.0
[ 30.717] Module class: X.Org XInput Driver
[ 30.717] ABI class: X.Org XInput driver, version 13.0
[ 30.717] (II) Using input driver 'evdev' for 'Power Button'
[ 30.717] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.718] (**) Power Button: always reports core events
[ 30.718] (**) Power Button: Device: "/dev/input/event5"
[ 30.718] (--) Power Button: Found keys
[ 30.718] (II) Power Button: Configuring as keyboard
[ 30.718] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 30.718] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 30.718] (**) Option "xkb_rules" "evdev"
[ 30.718] (**) Option "xkb_model" "pc105"
[ 30.718] (**) Option "xkb_layout" "fr"
[ 30.848] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 30.848] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.849] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.849] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.849] (**) Video Bus: always reports core events
[ 30.849] (**) Video Bus: Device: "/dev/input/event11"
[ 30.849] (--) Video Bus: Found keys
[ 30.849] (II) Video Bus: Configuring as keyboard
[ 30.849] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11/event11"
[ 30.849] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 30.849] (**) Option "xkb_rules" "evdev"
[ 30.849] (**) Option "xkb_model" "pc105"
[ 30.849] (**) Option "xkb_layout" "fr"
[ 30.851] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 30.851] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.851] (II) Using input driver 'evdev' for 'Power Button'
[ 30.851] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.851] (**) Power Button: always reports core events
[ 30.851] (**) Power Button: Device: "/dev/input/event3"
[ 30.851] (--) Power Button: Found keys
[ 30.851] (II) Power Button: Configuring as keyboard
[ 30.851] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 30.851] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 30.851] (**) Option "xkb_rules" "evdev"
[ 30.851] (**) Option "xkb_model" "pc105"
[ 30.851] (**) Option "xkb_layout" "fr"
[ 30.861] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 30.861] (II) No input driver specified, ignoring this device.
[ 30.861] (II) This device may have been added with another device file.
[ 30.862] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 30.862] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.862] (II) Using input driver 'evdev' for 'Sleep Button'
[ 30.862] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.862] (**) Sleep Button: always reports core events
[ 30.862] (**) Sleep Button: Device: "/dev/input/event4"
[ 30.862] (--) Sleep Button: Found keys
[ 30.862] (II) Sleep Button: Configuring as keyboard
[ 30.862] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 30.862] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 30.863] (**) Option "xkb_rules" "evdev"
[ 30.863] (**) Option "xkb_model" "pc105"
[ 30.863] (**) Option "xkb_layout" "fr"
[ 30.866] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[ 30.866] (II) No input driver specified, ignoring this device.
[ 30.866] (II) This device may have been added with another device file.
[ 30.867] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[ 30.867] (II) No input driver specified, ignoring this device.
[ 30.867] (II) This device may have been added with another device file.
[ 30.868] (II) config/udev: Adding input device B16_b_02 USB-PS/2 Optical Mouse (/dev/input/event1)
[ 30.869] (**) B16_b_02 USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 30.869] (II) Using input driver 'evdev' for 'B16_b_02 USB-PS/2 Optical Mouse'
[ 30.869] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.869] (**) B16_b_02 USB-PS/2 Optical Mouse: always reports core events
[ 30.869] (**) B16_b_02 USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 30.869] (--) B16_b_02 USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 30.869] (--) B16_b_02 USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 30.869] (--) B16_b_02 USB-PS/2 Optical Mouse: Found relative axes
[ 30.869] (--) B16_b_02 USB-PS/2 Optical Mouse: Found x and y relative axes
[ 30.869] (II) B16_b_02 USB-PS/2 Optical Mouse: Configuring as mouse
[ 30.869] (II) B16_b_02 USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 30.869] (**) B16_b_02 USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 30.869] (**) B16_b_02 USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.869] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input1/event1"
[ 30.869] (II) XINPUT: Adding extended input device "B16_b_02 USB-PS/2 Optical Mouse" (type: MOUSE, id 10)
[ 30.869] (II) B16_b_02 USB-PS/2 Optical Mouse: initialized for relative axes.
[ 30.870] (**) B16_b_02 USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 30.870] (**) B16_b_02 USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 30.870] (**) B16_b_02 USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 30.870] (**) B16_b_02 USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 30.871] (II) config/udev: Adding input device B16_b_02 USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 30.871] (II) No input driver specified, ignoring this device.
[ 30.871] (II) This device may have been added with another device file.
[ 30.877] (II) config/udev: Adding input device WebCam SCB-0385N (/dev/input/event8)
[ 30.877] (**) WebCam SCB-0385N: Applying InputClass "evdev keyboard catchall"
[ 30.877] (II) Using input driver 'evdev' for 'WebCam SCB-0385N'
[ 30.877] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.877] (**) WebCam SCB-0385N: always reports core events
[ 30.877] (**) WebCam SCB-0385N: Device: "/dev/input/event8"
[ 30.877] (--) WebCam SCB-0385N: Found keys
[ 30.877] (II) WebCam SCB-0385N: Configuring as keyboard
[ 30.877] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input8/event8"
[ 30.877] (II) XINPUT: Adding extended input device "WebCam SCB-0385N" (type: KEYBOARD, id 11)
[ 30.877] (**) Option "xkb_rules" "evdev"
[ 30.878] (**) Option "xkb_model" "pc105"
[ 30.878] (**) Option "xkb_layout" "fr"
[ 30.879] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 30.879] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.879] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.879] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.880] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.880] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 30.880] (--) AT Translated Set 2 keyboard: Found keys
[ 30.880] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.880] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 30.880] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 30.880] (**) Option "xkb_rules" "evdev"
[ 30.880] (**) Option "xkb_model" "pc105"
[ 30.880] (**) Option "xkb_layout" "fr"
[ 30.882] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 30.882] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 30.882] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 30.882] (II) LoadModule: "synaptics"
[ 30.882] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 30.942] (II) Module synaptics: vendor="X.Org Foundation"
[ 30.942] compiled for 1.11.2.902, module version = 1.5.0
[ 30.942] Module class: X.Org XInput Driver
[ 30.942] ABI class: X.Org XInput driver, version 13.0
[ 30.942] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 30.942] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 30.943] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 30.943] (**) Option "Device" "/dev/input/event7"
[ 30.943] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1944
[ 30.943] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 864
[ 30.943] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 30.943] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 0
[ 30.943] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 30.943] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 30.943] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 30.943] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 30.943] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 30.943] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[ 30.943] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 30.944] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[ 30.944] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.094
[ 30.944] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 30.944] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 30.944] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 30.944] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 30.944] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 30.945] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 30.945] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 30.946] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 30.946] (II) No input driver specified, ignoring this device.
[ 30.946] (II) This device may have been added with another device file.
[ 50.409] (II) intel(0): EDID vendor "SEC", prod id 12336
[ 50.409] (II) intel(0): Printing DDC gathered Modelines:
[ 50.409] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 50.440] (II) intel(0): EDID vendor "SEC", prod id 12336
[ 50.440] (II) intel(0): Printing DDC gathered Modelines:
[ 50.440] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 52.081] (II) intel(0): EDID vendor "SEC", prod id 12336
[ 52.095] (II) intel(0): Printing DDC gathered Modelines:
[ 52.095] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 52.165] (II) intel(0): EDID vendor "SEC", prod id 12336
[ 52.166] (II) intel(0): Printing DDC gathered Modelines:
[ 52.166] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 52.196] (II) intel(0): EDID vendor "SEC", prod id 12336
[ 52.196] (II) intel(0): Printing DDC gathered Modelines:
[ 52.196] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 100.315] (II) intel(0): EDID vendor "SEC", prod id 12336
[ 100.315] (II) intel(0): Printing DDC gathered Modelines:
[ 100.316] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 101.344] (II) intel(0): EDID vendor "SEC", prod id 12336
[ 101.344] (II) intel(0): Printing DDC gathered Modelines:
[ 101.344] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 102.232] (II) intel(0): EDID vendor "SEC", prod id 12336
[ 102.232] (II) intel(0): Printing DDC gathered Modelines:
[ 102.232] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 103.174] (II) intel(0): EDID vendor "SEC", prod id 12336
[ 103.174] (II) intel(0): Printing DDC gathered Modelines:
[ 103.174] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 103.216] (II) intel(0): EDID vendor "SEC", prod id 12336
[ 103.216] (II) intel(0): Printing DDC gathered Modelines:
[ 103.216] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 106.116] (II) intel(0): EDID vendor "SEC", prod id 12336
[ 106.116] (II) intel(0): Printing DDC gathered Modelines:
[ 106.116] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)
[ 783.239] (II) intel(0): EDID vendor "SEC", prod id 12336
[ 783.239] (II) intel(0): Printing DDC gathered Modelines:
[ 783.239] (II) intel(0): Modeline "1024x600"x0.0 54.20 1024 1048 1184 1344 600 603 609 670 -hsync -vsync (40.3 kHz)Hors ligne
#2 Le 10/09/2012, à 07:56
- elendil
Re : Bureau modifié
Salut,
LinuxMint est un fork d'Ubuntu et ils ont (me semble-t-il) entièrement "redessiner" les environnements de bureau (XFCE, Gnome et autre) du coup il vaudrait mieux poster sur leur forum Forum Français ou bien ici Forum Anglais.
Elendil
Hors ligne
Pages : 1
- Forum
- » XFCE
- » Bureau modifié