Ubuntu-fr

Toins31

[Résolu] Beryl, compiz et xorg.conf ...

Bonsoir,

bon voilà j'ai installé beryl, fait des modifs du xorg.conf pour que ça marche, puis j'ai mis à jour ma edgy et maintenant j'utilise compiz avec les drivers propriétaires installés avec le nouveau module d'installation.

Seulement voilà c'est devenu un peu le bordel dans mon fichier de configuration:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Mon Feb 26 23:38:46 PST 2007

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier	"Default Layout"
  screen "Default Screen" 0 0
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	Inputdevice	"stylus"	"SendCoreEvents"
	Inputdevice	"cursor"	"SendCoreEvents"
	Inputdevice	"eraser"	"SendCoreEvents"
EndSection

Section "Files"
	
	# path to defoma fonts
	Fontpath	"/usr/share/X11/fonts/misc"
	Fontpath	"/usr/share/X11/fonts/cyrillic"
	Fontpath	"/usr/share/X11/fonts/100dpi/:unscaled"
	Fontpath	"/usr/share/X11/fonts/75dpi/:unscaled"
	Fontpath	"/usr/share/X11/fonts/Type1"
	Fontpath	"/usr/share/X11/fonts/100dpi"
	Fontpath	"/usr/share/X11/fonts/75dpi"
	Fontpath	"/usr/share/fonts/X11/misc"
	Fontpath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load		"i2c"
	Load		"bitmap"
	Load		"ddc"
	Load		"extmod"
	Load		"freetype"
	Load		"glx"
	Load		"int10"
	Load		"type1"
	Load		"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ExplorerPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	
	# /dev/input/event
	# for USB
	Identifier	"stylus"
	Driver		"wacom"
	Option		"Device"	"/dev/wacom"# Change to 
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	
	# /dev/input/event
	# for USB
	Identifier	"eraser"
	Driver		"wacom"
	Option		"Device"	"/dev/wacom"# Change to 
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	
	# /dev/input/event
	# for USB
	Identifier	"cursor"
	Driver		"wacom"
	Option		"Device"	"/dev/wacom"# Change to 
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Horizsync	56.0	-	80.0
	Vertrefresh	60.0	-	75.0
	Option		"DPMS"
EndSection

Section "Device"
	Identifier	"Carte vid�g�rique"
	Driver		"nvidia"
	Option		"AddARGBVisuals"	"True"
	Option		"AddARGBGLXVisuals"	"True"
	Option		"NoLogo"	"True"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Carte vid�g�rique"
	Monitor		"Generic Monitor"
	Defaultdepth	24
	Option		"AddARGBGLXVisuals"	"True"
	SubSection "Display"
		Depth	1
		Modes		"1280x1024"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	4
		Modes		"1280x1024"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	8
		Modes		"1280x1024"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	15
		Modes		"1280x1024"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	16
		Modes		"1280x1024"	"1024x768"	"800x600"	"640x480"
	EndSubSection
	SubSection "Display"
		Depth	24
		Modes		"1280x1024"	"1024x768"	"800x600"	"640x480"
	EndSubSection
EndSection

Section "Extensions"
	Option		"Composite"	"Enable"
EndSection

Notament j'ai trois fois: "AddARGBGLXVisuals"    "True", d'ailleurs est-ce "AddARGBGLXVisuals" ou "AddARGBVisuals".

Ensuite par rapport au wiki: http://doc.ubuntu-fr.org/compiz je n'ai pas Load "dbe"
  Load "dri" dans les modules et pas de "XAANoOffscreenPixmaps".

Qu'en pensez vous? Sachant que ça marche mais ça freeze de temps en temps et que dans l'absolu j'aimerais pouvoir faire marcher beryl et compiz mais je me satisfais très bien de compiz que je trouve légèrement plus fluide...

Par avance merci...

Dernière modification par Toins31 (Le 11/07/2007, à 07:29)

Toins31

Re : [Résolu] Beryl, compiz et xorg.conf ...

Je clos donc ce post car j'ai tout remis en ordre grâce au site officiel de compiz:
http://www.compiz.org/NVidia
A bon entendeur