Ubuntu-fr

sathyl

[RESOLU]Prob Résolution Samsung SyncMaster 931BW

Bonjour,
Je poste après avoir longuement testé toutes les méthodes qui sont dans la doc mais je n'ai toujours pas résolu mon problème d'affichage je suis bloqué à 1024*768 quand je passe par système>préférences>résolution de l'écran.
Mon écran est un 19' Wide SAMSUNG SyncMaster 931 BW et je suis connecté en DVI.
Les pilotes propriétaires sont bien installé no prob.

En passant par la console : nvidia-settings
Dans X Server Display Configuration j'ai la possibilité de la modifier à
1280*768
1280*800
1440*900
Et donc je décide d'appliquer 1280*800 pour tester et voici le message :
Layout inconsistencies
|show details|
|autofix|  |ignore| |cancel|
Et je ne peux évidement pas Save to X Configuration File.

Voici quelques infos sur la carte

lspci | grep VGA 
02:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)

lspci -n
00:00.0 0600: 10de:01e0 (rev a2)
00:00.1 0500: 10de:01eb (rev a2)
00:00.2 0500: 10de:01ee (rev a2)
00:00.3 0500: 10de:01ed (rev a2)
00:00.4 0500: 10de:01ec (rev a2)
00:00.5 0500: 10de:01ef (rev a2)
00:01.0 0601: 10de:0060 (rev a3)
00:01.1 0c05: 10de:0064 (rev a2)
00:02.0 0c03: 10de:0067 (rev a3)
00:02.1 0c03: 10de:0067 (rev a3)
00:02.2 0c03: 10de:0068 (rev a3)
00:04.0 0200: 10de:0066 (rev a1)
00:08.0 0604: 10de:006c (rev a3)
00:09.0 0101: 10de:0065 (rev a2)
00:1e.0 0604: 10de:01e8 (rev a2)
01:07.0 0400: 109e:036e (rev 11)
01:07.1 0480: 109e:0878 (rev 11)
01:09.0 0401: 1102:0002 (rev 0a)
01:09.1 0980: 1102:7002 (rev 0a)
02:00.0 0300: 10de:0322 (rev a1)

Voici mon xorg.conf

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Thu Nov  9 17:55:20 PST 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
    FontPath        "/usr/share/fonts/X11/misc"
    FontPath        "/usr/share/fonts/X11/cyrillic"
    FontPath        "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath        "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath        "/usr/share/fonts/X11/Type1"
    FontPath        "/usr/share/fonts/X11/100dpi"
    FontPath        "/usr/share/fonts/X11/75dpi"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "vbe"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fr"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ImPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "Écran générique"
    HorizSync       28.0 - 51.0
    VertRefresh     43.0 - 60.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "nVidia Corporation NV34 [GeForce FX 5200]"
    Driver         "nvidia"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "nVidia Corporation NV34 [GeForce FX 5200]"
    Monitor        "Écran générique"
    DefaultDepth    24
    Option         "ConnectedMonitor" "DFP"
    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"
    Option         "NoLogo" "True"
    SubSection     "Display"
        Depth       1
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1024x768" "800x600" "640x480"
    EndSubSectionJe vous remercie tou
    SubSection     "Display"
        Depth       8
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1024x768" "800x600" "640x480"
    EndSubSe

Merci à tous ceux qui prendront la peine de me répondre

Dernière modification par sathyl (Le 09/07/2007, à 20:12)

sathyl

Re : [RESOLU]Prob Résolution Samsung SyncMaster 931BW

Voici comment j'ai résolu mon prob :

 sudo gedit /etc/X11/xorg.conf

Dans la partie

Section "Screen"
    Identifier     "Default Screen"
    Device         "nVidia Corporation NV34 [GeForce FX 5200]"
    Monitor        "Écran générique"
    DefaultDepth    24
    Option         "ConnectedMonitor" "DFP"
    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"
    Option         "NoLogo" "True"
    SubSection     "Display"
        Depth       1
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1024x768" "800x600" "640x480"
    EndSubSe

J'ai tout simplement rajouté les résolutions que je voulais et que mon écran supportait pour chaque depth voici ce que ça donne :

Section "Screen"
    Identifier     "Default Screen"
    Device         "nVidia Corporation NV34 [GeForce FX 5200]"
    Monitor        "Écran générique"
    DefaultDepth    24
    Option         "ConnectedMonitor" "DFP"
    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"
    Option         "NoLogo" "True"
    SubSection     "Display"
        Depth       1
        Modes      "1440x900" "1280x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1440x900" "1280x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1440x900" "1280x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1440x900" "1280x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1440x900" "1280x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1440x900" "1280x800" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Enregistrer xorg.conf et Ctrl Alt Backspace.
Je n'ai plus qu'a aller changer dans système>préférences>résolution de l'écran et choisir
1440x900
En éspérant que cette bidouille marchera pour vous...
Merci à moi

Dernière modification par sathyl (Le 09/07/2007, à 20:21)