Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 20/06/2007, à 13:06

bertignac

[RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

Bonjour à tous,
Ne réussissant pas depuis un certain moment à installer beryl, j'ai utilsé ces conseils http://forum.ubuntu-fr.org/viewtopic.php?id=108756

Pas de problème apparent lorsque je teste beryl::)

**************************************************************
* Beryl system compatiblity check                            *
**************************************************************

Detected xserver                                : AIGLX

Checking Display :0.0 ...

Checking for XComposite extension               : passed (v0.3)
Checking for XDamage extension                  : passed
Checking for RandR extension                    : passed
Checking for XSync extension                    : passed

Checking Screen 0 ...

Checking for GLX_SGIX_fbconfig                  : passed
Checking for GLX_EXT_texture_from_pixmap        : passed
Checking for non power of two texture support   : passed
Checking maximum texture size                   : passed (2048x2048)

Cependant ma résolution est modifiée, l'écran est comme "zoomé" et la couleur de la police d'écriture pas très net...:/
Lorsque je cherche à la modifier en 1152*758, la résolution est bonne mais beaucoup d'erreurs d'affichage

Voilà mon xorg.

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"oss"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"auto-dev"
	Option		"HorizScrollDelta"	"0"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"stylus"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"eraser"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"cursor"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"Carte vidéo générique"
	Driver		"ati"
	BusID		"PCI:1:5:0"
        Option "MonitorLayout" "LVDS, AUTO"

EndSection

Section "Monitor"
	Identifier	"Écran générique"
	Option		"DPMS"
	HorizSync	28-51
	VertRefresh	43-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Carte vidéo générique"
	Monitor		"Écran générique"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus"	"SendCoreEvents"
	InputDevice     "cursor"	"SendCoreEvents"
	InputDevice     "eraser"	"SendCoreEvents"
	InputDevice	"Synaptics Touchpad"
EndSection

Section "DRI"
	Mode	0666
EndSection

Malheureusement au lancement de Beryl écran blanc -->OH mais on dirait un problème d'accélération graphique cool

Regardons ça de près

bertignac@bertignac-laptop:~$ glxinfo |grep "direct rendering"
direct rendering: No

Gagné!:D
Je vais donc installer les pilotes propriétaires Ati X200M...

Votre matériel ne nécessite aucun pilote propriétaire"

sad

Que faire???

Merci d'avance pour votre courageuse lecture et aimable réponse!!!

Dernière modification par bertignac (Le 23/06/2007, à 15:50)

Laptop Dell Inspiron 1501-Ubuntu 8.10

Hors ligne

#2 Le 20/06/2007, à 13:52

inbox

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

Salut,

Dans la documentation sur Beryl et ses problèmes on y parle d'écran blanc.

A+

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#3 Le 20/06/2007, à 16:40

bertignac

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

Le problème d'écran blanc est résolu merci mais ça rame à mort par contre fonctionne car j'ai vu l'effet de transparence...Donc il me manque l'accélération graphique et comment récupérer une résolution correcte?

Laptop Dell Inspiron 1501-Ubuntu 8.10

Hors ligne

#4 Le 20/06/2007, à 17:03

inbox

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

Voici la page concernant les pilotes graphiques si ça peut aider.

Sinon, je me renseigne...

A+

[EDIT] A priori, pour ton problème d'accélération graphique il te faudrait utiliser le pilote propriétaire FGLRX plus XGL pour pouvoir lancer Beryl.

Dernière modification par inbox (Le 21/06/2007, à 12:55)

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#5 Le 21/06/2007, à 09:33

bertignac

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

Je voudrais tester avec fglrx plutot que aiglx car c'est ce qui est apparament conseillé pour ma carte ati X200M.
Comment virer aiglx?

Laptop Dell Inspiron 1501-Ubuntu 8.10

Hors ligne

#6 Le 21/06/2007, à 11:03

bertignac

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

Les nouvelles!
J'ai correctement suivi les instructions d'installation de flgrx et d'après les test proposés tout est ok ainsi que l'accélération graphique
Seulement beryl detecte toujours aiglx malgré l'option "aiglx false(presque ça)" dans xorg.conf.
[edit]La réinstallation de beryl n'a rien changé!!!
En attendant des idées?

Dernière modification par bertignac (Le 21/06/2007, à 11:25)

Laptop Dell Inspiron 1501-Ubuntu 8.10

Hors ligne

#7 Le 21/06/2007, à 13:12

inbox

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

Colles le contenu de 

sudo gedit /var/log/Xorg.0.log

entre balises code, ainsi que d'autres messages d'erreurs éventuels (le texte complet !)

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#8 Le 21/06/2007, à 13:23

bertignac

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

Le voici en entier

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux bertignac-laptop 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686
Build Date: 04 April 2007
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 21 11:59:12 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "à‰cran générique"
(**) |   |-->Device "ati radeon X200M"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(**) |-->Input Device "Synaptics Touchpad"
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(**) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	/usr/share/fonts/X11/misc,
	/usr/X11R6/lib/X11/fonts/misc,
	/usr/share/fonts/X11/cyrillic,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/X11R6/lib/X11/fonts/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AIGLX" "false"
(**) Extension "Composite" is disabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81c92e0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 1.1
	X.Org XInput driver : 0.7
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.1
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,5950 card 1028,01f5 rev 10 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1002,5a3f card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:05:0: chip 1002,5a37 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:06:0: chip 1002,5a38 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:12:0: chip 1002,4380 card 1028,01f5 rev 00 class 01,06,01 hdr 00
(II) PCI: 00:13:0: chip 1002,4387 card 1028,01f5 rev 00 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4388 card 1028,01f5 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4389 card 1028,01f5 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:3: chip 1002,438a card 1028,01f5 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:4: chip 1002,438b card 1028,01f5 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:5: chip 1002,4386 card 1028,01f5 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4385 card 1028,01f5 rev 13 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,438c card 1028,01f5 rev 00 class 01,01,8a hdr 00
(II) PCI: 00:14:2: chip 1002,4383 card 1028,01f5 rev 00 class 04,03,00 hdr 00
(II) PCI: 00:14:3: chip 1002,438d card 1028,01f5 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4384 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:05:0: chip 1002,5975 card 1028,01f5 rev 00 class 03,00,00 hdr 00
(II) PCI: 05:00:0: chip 14e4,4312 card 1028,0007 rev 01 class 02,80,00 hdr 00
(II) PCI: 08:00:0: chip 14e4,170c card 1028,01f5 rev 02 class 02,00,00 hdr 00
(II) PCI: 08:01:0: chip 1180,0822 card 1028,01f5 rev 19 class 08,05,00 hdr 80
(II) PCI: 08:01:1: chip 1180,0843 card 1028,01f5 rev 01 class 08,80,00 hdr 80
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,8), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x00009000 - 0x000090ff (0x100) IX[b]
	[1] -1	0	0x00009400 - 0x000094ff (0x100) IX[b]
	[2] -1	0	0x00009800 - 0x000098ff (0x100) IX[b]
	[3] -1	0	0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xc0100000 - 0xc01fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:5:0), (0,2,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:6:0), (0,5,7), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 5 non-prefetchable memory range:
	[0] -1	0	0xc0200000 - 0xc02fffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:20:4), (0,8,10), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 8 non-prefetchable memory range:
	[0] -1	0	0xc0300000 - 0xc03fffff (0x100000) MX[b]
(--) PCI:*(1:5:0) ATI Technologies Inc RS485 [Radeon Xpress 1100 IGP] rev 0, Mem @ 0xc8000000/27, 0xc0100000/16, I/O @ 0x9000/8
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
	[0] -1	0	0xc0302400 - 0xc03024ff (0x100) MX[b]
	[1] -1	0	0xc0302000 - 0xc03020ff (0x100) MX[b]
	[2] -1	0	0xc0300000 - 0xc0301fff (0x2000) MX[b]
	[3] -1	0	0xc0200000 - 0xc0203fff (0x4000) MX[b]
	[4] -1	0	0xc0000000 - 0xc0003fff (0x4000) MX[b]
	[5] -1	0	0xc0004800 - 0xc0004bff (0x400) MX[b]
	[6] -1	0	0xc0004400 - 0xc00044ff (0x100) MX[b]
	[7] -1	0	0xc0009000 - 0xc0009fff (0x1000) MX[b]
	[8] -1	0	0xc0008000 - 0xc0008fff (0x1000) MX[b]
	[9] -1	0	0xc0007000 - 0xc0007fff (0x1000) MX[b]
	[10] -1	0	0xc0006000 - 0xc0006fff (0x1000) MX[b]
	[11] -1	0	0xc0005000 - 0xc0005fff (0x1000) MX[b]
	[12] -1	0	0xc0004000 - 0xc00043ff (0x400) MX[b]
	[13] -1	0	0xc0100000 - 0xc010ffff (0x10000) MX[b](B)
	[14] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
	[15] -1	0	0x00008420 - 0x0000842f (0x10) IX[b]
	[16] -1	0	0x00000170 - 0x00000170 (0x1) IX[b]
	[17] -1	0	0x00000170 - 0x00000177 (0x8) IX[b]
	[18] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[b]
	[19] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[20] -1	0	0x00008410 - 0x0000841f (0x10) IX[b]
	[21] -1	0	0x00008400 - 0x0000840f (0x10) IX[b]
	[22] -1	0	0x00008450 - 0x00008453 (0x4) IX[b]
	[23] -1	0	0x00008430 - 0x00008437 (0x8) IX[b]
	[24] -1	0	0x00008454 - 0x00008457 (0x4) IX[b]
	[25] -1	0	0x00008438 - 0x0000843f (0x8) IX[b]
	[26] -1	0	0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xc0302400 - 0xc03024ff (0x100) MX[b]
	[1] -1	0	0xc0302000 - 0xc03020ff (0x100) MX[b]
	[2] -1	0	0xc0300000 - 0xc0301fff (0x2000) MX[b]
	[3] -1	0	0xc0200000 - 0xc0203fff (0x4000) MX[b]
	[4] -1	0	0xc0000000 - 0xc0003fff (0x4000) MX[b]
	[5] -1	0	0xc0004800 - 0xc0004bff (0x400) MX[b]
	[6] -1	0	0xc0004400 - 0xc00044ff (0x100) MX[b]
	[7] -1	0	0xc0009000 - 0xc0009fff (0x1000) MX[b]
	[8] -1	0	0xc0008000 - 0xc0008fff (0x1000) MX[b]
	[9] -1	0	0xc0007000 - 0xc0007fff (0x1000) MX[b]
	[10] -1	0	0xc0006000 - 0xc0006fff (0x1000) MX[b]
	[11] -1	0	0xc0005000 - 0xc0005fff (0x1000) MX[b]
	[12] -1	0	0xc0004000 - 0xc00043ff (0x400) MX[b]
	[13] -1	0	0xc0100000 - 0xc010ffff (0x10000) MX[b](B)
	[14] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
	[15] -1	0	0x00008420 - 0x0000842f (0x10) IX[b]
	[16] -1	0	0x00000170 - 0x00000170 (0x1) IX[b]
	[17] -1	0	0x00000170 - 0x00000177 (0x8) IX[b]
	[18] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[b]
	[19] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[20] -1	0	0x00008410 - 0x0000841f (0x10) IX[b]
	[21] -1	0	0x00008400 - 0x0000840f (0x10) IX[b]
	[22] -1	0	0x00008450 - 0x00008453 (0x4) IX[b]
	[23] -1	0	0x00008430 - 0x00008437 (0x8) IX[b]
	[24] -1	0	0x00008454 - 0x00008457 (0x4) IX[b]
	[25] -1	0	0x00008438 - 0x0000843f (0x8) IX[b]
	[26] -1	0	0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xc0302400 - 0xc03024ff (0x100) MX[b]
	[5] -1	0	0xc0302000 - 0xc03020ff (0x100) MX[b]
	[6] -1	0	0xc0300000 - 0xc0301fff (0x2000) MX[b]
	[7] -1	0	0xc0200000 - 0xc0203fff (0x4000) MX[b]
	[8] -1	0	0xc0000000 - 0xc0003fff (0x4000) MX[b]
	[9] -1	0	0xc0004800 - 0xc0004bff (0x400) MX[b]
	[10] -1	0	0xc0004400 - 0xc00044ff (0x100) MX[b]
	[11] -1	0	0xc0009000 - 0xc0009fff (0x1000) MX[b]
	[12] -1	0	0xc0008000 - 0xc0008fff (0x1000) MX[b]
	[13] -1	0	0xc0007000 - 0xc0007fff (0x1000) MX[b]
	[14] -1	0	0xc0006000 - 0xc0006fff (0x1000) MX[b]
	[15] -1	0	0xc0005000 - 0xc0005fff (0x1000) MX[b]
	[16] -1	0	0xc0004000 - 0xc00043ff (0x400) MX[b]
	[17] -1	0	0xc0100000 - 0xc010ffff (0x10000) MX[b](B)
	[18] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[21] -1	0	0x00008420 - 0x0000842f (0x10) IX[b]
	[22] -1	0	0x00000170 - 0x00000170 (0x1) IX[b]
	[23] -1	0	0x00000170 - 0x00000177 (0x8) IX[b]
	[24] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[b]
	[25] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[26] -1	0	0x00008410 - 0x0000841f (0x10) IX[b]
	[27] -1	0	0x00008400 - 0x0000840f (0x10) IX[b]
	[28] -1	0	0x00008450 - 0x00008453 (0x4) IX[b]
	[29] -1	0	0x00008430 - 0x00008437 (0x8) IX[b]
	[30] -1	0	0x00008454 - 0x00008457 (0x4) IX[b]
	[31] -1	0	0x00008438 - 0x0000843f (0x8) IX[b]
	[32] -1	0	0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 7.2.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(**) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.1.0
	ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.1.0, module version = 8.37.6
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.1.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.1.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
	compiled for 4.3.99.902, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) Wacom driver level: 47-0.7.7-7 $
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.3
(II) Primary Device is: PCI 01:05:0
(II) ATI Proprietary Linux Driver Version Identifier:8.37.6
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.37g1                           
(II) ATI Proprietary Linux Driver Build Date: May 25 2007 14:25:03
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.37.1.1.2.3-driver-lnx-x86-x86_64-346145
(--) Chipset Supported AMD Graphics Processor (0x5975) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xc0302400 - 0xc03024ff (0x100) MX[b]
	[5] -1	0	0xc0302000 - 0xc03020ff (0x100) MX[b]
	[6] -1	0	0xc0300000 - 0xc0301fff (0x2000) MX[b]
	[7] -1	0	0xc0200000 - 0xc0203fff (0x4000) MX[b]
	[8] -1	0	0xc0000000 - 0xc0003fff (0x4000) MX[b]
	[9] -1	0	0xc0004800 - 0xc0004bff (0x400) MX[b]
	[10] -1	0	0xc0004400 - 0xc00044ff (0x100) MX[b]
	[11] -1	0	0xc0009000 - 0xc0009fff (0x1000) MX[b]
	[12] -1	0	0xc0008000 - 0xc0008fff (0x1000) MX[b]
	[13] -1	0	0xc0007000 - 0xc0007fff (0x1000) MX[b]
	[14] -1	0	0xc0006000 - 0xc0006fff (0x1000) MX[b]
	[15] -1	0	0xc0005000 - 0xc0005fff (0x1000) MX[b]
	[16] -1	0	0xc0004000 - 0xc00043ff (0x400) MX[b]
	[17] -1	0	0xc0100000 - 0xc010ffff (0x10000) MX[b](B)
	[18] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[21] -1	0	0x00008420 - 0x0000842f (0x10) IX[b]
	[22] -1	0	0x00000170 - 0x00000170 (0x1) IX[b]
	[23] -1	0	0x00000170 - 0x00000177 (0x8) IX[b]
	[24] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[b]
	[25] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[26] -1	0	0x00008410 - 0x0000841f (0x10) IX[b]
	[27] -1	0	0x00008400 - 0x0000840f (0x10) IX[b]
	[28] -1	0	0x00008450 - 0x00008453 (0x4) IX[b]
	[29] -1	0	0x00008430 - 0x00008437 (0x8) IX[b]
	[30] -1	0	0x00008454 - 0x00008457 (0x4) IX[b]
	[31] -1	0	0x00008438 - 0x0000843f (0x8) IX[b]
	[32] -1	0	0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x81e4b90
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xc0302400 - 0xc03024ff (0x100) MX[b]
	[5] -1	0	0xc0302000 - 0xc03020ff (0x100) MX[b]
	[6] -1	0	0xc0300000 - 0xc0301fff (0x2000) MX[b]
	[7] -1	0	0xc0200000 - 0xc0203fff (0x4000) MX[b]
	[8] -1	0	0xc0000000 - 0xc0003fff (0x4000) MX[b]
	[9] -1	0	0xc0004800 - 0xc0004bff (0x400) MX[b]
	[10] -1	0	0xc0004400 - 0xc00044ff (0x100) MX[b]
	[11] -1	0	0xc0009000 - 0xc0009fff (0x1000) MX[b]
	[12] -1	0	0xc0008000 - 0xc0008fff (0x1000) MX[b]
	[13] -1	0	0xc0007000 - 0xc0007fff (0x1000) MX[b]
	[14] -1	0	0xc0006000 - 0xc0006fff (0x1000) MX[b]
	[15] -1	0	0xc0005000 - 0xc0005fff (0x1000) MX[b]
	[16] -1	0	0xc0004000 - 0xc00043ff (0x400) MX[b]
	[17] -1	0	0xc0100000 - 0xc010ffff (0x10000) MX[b](B)
	[18] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
	[19] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b]
	[20] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b]
	[21] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b]
	[22] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[23] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[24] -1	0	0x00008420 - 0x0000842f (0x10) IX[b]
	[25] -1	0	0x00000170 - 0x00000170 (0x1) IX[b]
	[26] -1	0	0x00000170 - 0x00000177 (0x8) IX[b]
	[27] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[b]
	[28] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[29] -1	0	0x00008410 - 0x0000841f (0x10) IX[b]
	[30] -1	0	0x00008400 - 0x0000840f (0x10) IX[b]
	[31] -1	0	0x00008450 - 0x00008453 (0x4) IX[b]
	[32] -1	0	0x00008430 - 0x00008437 (0x8) IX[b]
	[33] -1	0	0x00008454 - 0x00008457 (0x4) IX[b]
	[34] -1	0	0x00008438 - 0x0000843f (0x8) IX[b]
	[35] -1	0	0x00009000 - 0x000090ff (0x100) IX[b](B)
	[36] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b]
	[37] 0	0	0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): PCI bus 1 card 5 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) Loading sub module "vm86"
(II) LoadModule: "vm86"
(II) Loading /usr/lib/xorg/modules//libvm86.so
(II) Module vm86: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "ATI Radeon Xpress Series" (Chipset = 0x5975)
(--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x01f5)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc8000000
(--) fglrx(0): MMIO registers at 0xc0100000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI Radeon® Xpress 1150    
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: MS48
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.1.0, module version = 8.37.6
	ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SEC  Model: 0  Serial#: 0
(II) fglrx(0): Year: 2006  Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
(II) fglrx(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 71.1 MHz   Image Size:  331 x 207 mm
(II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) fglrx(0): v_active: 800  v_sync: 802  v_sync_end 808 v_blanking: 823 v_border: 0
(II) fglrx(0):  DF056154X3
(II) fglrx(0):  '@PZ°Ùÿ
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00ffffffffffff004ca3000000000000
(II) fglrx(0): 	00100103802115780a87f594574f8c27
(II) fglrx(0): 	27505400000001010101010101010101
(II) fglrx(0): 	010101010101c71b00a0502017303020
(II) fglrx(0): 	26004bcf100000190000000f00000000
(II) fglrx(0): 	00000000002387026400000000fe0044
(II) fglrx(0): 	463035360331353458330a20000000fe
(II) fglrx(0): 	002740505a81b0d9ff01010a2020009d
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3.  2 power states available:
(II) fglrx(0):   1. 401/401MHz @ 60Hz [enable load balancing]
(II) fglrx(0):   2. 100/133MHz @ 60Hz [low voltage]
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total of 11 modes found for primary display.
(--) fglrx(0): Virtual size is 1024x768 (pitch 0)
(**) fglrx(0): *Mode "1024x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   71.11  1024 1200 1232 1440  768 786 792 823
(**) fglrx(0): *Mode "800x600": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   71.11  800 1088 1120 1440  600 702 708 823
(**) fglrx(0): *Mode "640x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   71.11  640 1008 1040 1440  480 642 648 823
(**) fglrx(0):  Default mode "848x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"   71.11  848 1112 1144 1440  480 642 648 823
(**) fglrx(0):  Default mode "720x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"   71.11  720 1048 1080 1440  480 642 648 823
(**) fglrx(0):  Default mode "640x400": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   71.11  640 1008 1040 1440  400 602 608 823
(**) fglrx(0):  Default mode "640x350": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x350"   71.11  640 1008 1040 1440  350 577 583 823
(**) fglrx(0):  Default mode "512x384": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   71.11  512 944 976 1440  384 594 600 823
(**) fglrx(0):  Default mode "400x300": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   71.11  400 888 920 1440  300 702 708 823 doublescan
(**) fglrx(0):  Default mode "320x240": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   71.11  320 848 880 1440  240 642 648 823 doublescan
(**) fglrx(0):  Default mode "320x200": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   71.11  320 848 880 1440  200 602 608 823 doublescan
(--) fglrx(0): Display dimensions: (330, 210) mm
(--) fglrx(0): DPI set to (78, 92)
(--) fglrx(0): Virtual size is 1024x768 (pitch 1024)
(**) fglrx(0): *Mode "1024x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   71.11  1024 1200 1232 1440  768 786 792 823
(**) fglrx(0): *Mode "800x600": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   71.11  800 1088 1120 1440  600 702 708 823
(**) fglrx(0): *Mode "640x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   71.11  640 1008 1040 1440  480 642 648 823
(**) fglrx(0):  Default mode "848x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"   71.11  848 1112 1144 1440  480 642 648 823
(**) fglrx(0):  Default mode "720x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"   71.11  720 1048 1080 1440  480 642 648 823
(**) fglrx(0):  Default mode "640x400": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   71.11  640 1008 1040 1440  400 602 608 823
(**) fglrx(0):  Default mode "640x350": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x350"   71.11  640 1008 1040 1440  350 577 583 823
(**) fglrx(0):  Default mode "512x384": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   71.11  512 944 976 1440  384 594 600 823
(**) fglrx(0):  Default mode "400x300": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   71.11  400 888 920 1440  300 702 708 823 doublescan
(**) fglrx(0):  Default mode "320x240": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   71.11  320 848 880 1440  240 642 648 823 doublescan
(**) fglrx(0):  Default mode "320x200": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   71.11  320 848 880 1440  200 602 608 823 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000001f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 128 MB
(II) fglrx(0): [pcie] 126976 kB allocated with handle 0xdeadbeef
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) LoadModule: "glesx.so" (glesx)
(WW) LoadModule: given non-canonical module name "glesx.so"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
	compiled for 7.1.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xc0100000 - 0xc010ffff (0x10000) MX[b]
	[1] 0	0	0xc8000000 - 0xcfffffff (0x8000000) MX[b]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[6] -1	0	0xc0302400 - 0xc03024ff (0x100) MX[b]
	[7] -1	0	0xc0302000 - 0xc03020ff (0x100) MX[b]
	[8] -1	0	0xc0300000 - 0xc0301fff (0x2000) MX[b]
	[9] -1	0	0xc0200000 - 0xc0203fff (0x4000) MX[b]
	[10] -1	0	0xc0000000 - 0xc0003fff (0x4000) MX[b]
	[11] -1	0	0xc0004800 - 0xc0004bff (0x400) MX[b]
	[12] -1	0	0xc0004400 - 0xc00044ff (0x100) MX[b]
	[13] -1	0	0xc0009000 - 0xc0009fff (0x1000) MX[b]
	[14] -1	0	0xc0008000 - 0xc0008fff (0x1000) MX[b]
	[15] -1	0	0xc0007000 - 0xc0007fff (0x1000) MX[b]
	[16] -1	0	0xc0006000 - 0xc0006fff (0x1000) MX[b]
	[17] -1	0	0xc0005000 - 0xc0005fff (0x1000) MX[b]
	[18] -1	0	0xc0004000 - 0xc00043ff (0x400) MX[b]
	[19] -1	0	0xc0100000 - 0xc010ffff (0x10000) MX[b](B)
	[20] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
	[21] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
	[22] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
	[23] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
	[24] 0	0	0x00009000 - 0x000090ff (0x100) IX[b]
	[25] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[26] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[27] -1	0	0x00008420 - 0x0000842f (0x10) IX[b]
	[28] -1	0	0x00000170 - 0x00000170 (0x1) IX[b]
	[29] -1	0	0x00000170 - 0x00000177 (0x8) IX[b]
	[30] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[b]
	[31] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[32] -1	0	0x00008410 - 0x0000841f (0x10) IX[b]
	[33] -1	0	0x00008400 - 0x0000840f (0x10) IX[b]
	[34] -1	0	0x00008450 - 0x00008453 (0x4) IX[b]
	[35] -1	0	0x00008430 - 0x00008437 (0x8) IX[b]
	[36] -1	0	0x00008454 - 0x00008457 (0x4) IX[b]
	[37] -1	0	0x00008438 - 0x0000843f (0x8) IX[b]
	[38] -1	0	0x00009000 - 0x000090ff (0x100) IX[b](B)
	[39] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
	[40] 0	0	0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:5:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports 
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:5:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb7f85000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.37.6
(II) fglrx(0):     Date: May 25 2007
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.20-16-generic
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): Interrupt handler installed at IRQ 18.
(II) fglrx(0): Exposed events to the /proc interface
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] texture shared area handle = 0x00008000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0x38000000 FBMappedSize: 0x00501000
(II) fglrx(0): FBMM initialized for area (0,0)-(1024,1281)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1024 x 513
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) fglrx(0): GLESX enableFlags = 0
(II) fglrx(0): GLESX is enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Solid Lines
	Dashed Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		16 128x128 slots
		4 256x256 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Generic Keyboard: XkbLayout: "fr"
(**) Option "XkbVariant" "oss"
(**) Generic Keyboard: XkbVariant: "oss"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/input/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/input/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/input/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event4
(**) Option "Device" "/dev/input/event4"
(**) Option "HorizScrollDelta" "0"
(--) Synaptics Touchpad touchpad found
(**) Option "SendCoreEvents" "true"
(**) Synaptics Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE)
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
	No such file or directory.
Error opening /dev/input/wacom : Invalid argument
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
	No such file or directory.
Error opening /dev/input/wacom : Invalid argument
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
	No such file or directory.
Error opening /dev/input/wacom : Invalid argument
Synaptics DeviceInit called
SynapticsCtrl called.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Synaptics DeviceOn called
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event4
(**) Option "Device" "/dev/input/event4"
(--) Synaptics Touchpad touchpad found
Could not init font path element /usr/X11R6/lib/X11/fonts/misc, removing from list!
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1, removing from list!
ProcXCloseDevice to close or not ?
SetGrabKeysState - disabled
SetGrabKeysState - enabled

Laptop Dell Inspiron 1501-Ubuntu 8.10

Hors ligne

#9 Le 21/06/2007, à 16:34

inbox

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

Donc AIGLX est bien désactivé comme indiqué dans la log

(**) Option ..."AIGLX" "false"
.........
(**) AIGLX disabled
.....

M'est avis que tu as dû oublier l'installation de XGL comme indiqué précédemment. Pour pouvoir utiliser Beryl, c'est indispensable dans ton cas : ATI X200M + fglrx.;).

A+

Dernière modification par inbox (Le 21/06/2007, à 16:35)

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#10 Le 21/06/2007, à 17:04

bertignac

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

Merci!

bertignac@bertignac-laptop:~$ beryl --test**************************************************************
* Beryl system compatiblity check                            *
**************************************************************

Detected xserver                                : XGL

Checking Display :1.0 ...

Checking for XComposite extension               : passed (v0.3)
Checking for XDamage extension                  : passed
Checking for RandR extension                    : passed
Checking for XSync extension                    : passed

Il est obligatoire detre en session xgl?
Beryl ne se lance toujours pas et l'accélération graphique s'est désactivé, mais on avance tout de même!

Dernière modification par bertignac (Le 21/06/2007, à 17:09)

Laptop Dell Inspiron 1501-Ubuntu 8.10

Hors ligne

#11 Le 21/06/2007, à 17:31

inbox

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

Beryl ne se lance toujours pas et l'accélération graphique s'est désactivé

Comment sait tu cela ?! Quels messages ?

Je n'ai jamais utilisé Beryl + XGL et je pense qu'en cherchant 

ubuntu beryl sur ati x200m

tu trouveras pas mal d'infos comme par exemple : http://linux-facile.blogspot.com/2007_0 … chive.html

Hophop, au boulot !! big_smile

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#12 Le 22/06/2007, à 10:46

bertignac

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

J'ai réussi a avoir les effets avec beryl!ouf!Bemol pas de cube...sniff
Je pense que ça marche (à part le cube)mais je ne maîtrise pas les effets visuels etc...

Redémarrage aie aie aie --> ecran pourpre puis after reboot ecran plutôt noir...
Pas moyen que ubuntu se lance

Mais que se passe-t-il!!!!?

Dernière modification par bertignac (Le 22/06/2007, à 12:22)

Laptop Dell Inspiron 1501-Ubuntu 8.10

Hors ligne

#13 Le 22/06/2007, à 18:30

inbox

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

Que te donne la commande 

fglrxinfo

[EDIT]
Bon. En cherchant un peu avec mon ami Google 

ubuntu installer xgl et beryl sur une X200m

j'ai trouvé un HowTo en angais, mais très clair. Tu n'as donc plus qu'à suivre ceci. cool

Dernière modification par inbox (Le 22/06/2007, à 18:53)

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#14 Le 23/06/2007, à 11:05

bertignac

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

Merci beaucoup je suivrais ceci lorsque j'aurai réussi à démarrer mon pc!

C'est assez stressant quelques secondes aprèsavoir affiché la barre de chargement ubuntu,mon ecran passe du vert neutral:(aucun affichage de caractère), au pourpre:/ et enfin au noir.:(

AU SECOURS!!!

EDIT:C'est résolu du point de vue du démarage.J'ai découvert le recovery mode puis j'ai recréée un xorg.conf tout neuf.

je vais tenter la solution vue plus haut

EDIT2:Bon Beryl roule!De jolis effets éblouissent mon écran, mais ou est ce fameux cube?

Dernière modification par bertignac (Le 23/06/2007, à 13:32)

Laptop Dell Inspiron 1501-Ubuntu 8.10

Hors ligne

#15 Le 24/06/2007, à 00:40

inbox

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

EDIT2:Bon Beryl roule!De jolis effets éblouissent mon écran, mais ou est ce fameux cube?

ctrl + alt + (flèche) droite ou gauche !

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#16 Le 17/07/2007, à 11:27

fred091

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

SVP pouvez vous m'aider j'ai le meme probleme que bertignac sa fait 2 semaine que je n'arrive pas a installé BERYL sur ma ATIX200M je suis a bout. Mais je ne veut pas laisser tomber.

j'ai installé Ubuntu feisty et j'ai activé la carte graphique dans le gestionnaire des périphérique pour l'instant car c'est la 5eme fois que je reinstalle ubuntu.

AIDER MOI SVP !

#17 Le 18/07/2007, à 00:33

inbox

Re : [RESOLU]Beryl Ecran Blanc et pas moyen d'activer l'accélératioN

@fred091,

j'ai installé Ubuntu feisty et j'ai activé la carte graphique dans le gestionnaire des périphérique pour l'instant car c'est la 5eme fois que je reinstalle ubuntu.

C'est par ce que tu n'as pas bien tout lu et appliqué.:cool:

Use your brain !

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

Pages : 1