Ubuntu-fr

midtownmad

Multi-écran

Bonjour à tous,

Voilà je rencontre un problème pour configurer le multi écran sous Ubuntu 6.10.
Un seul de mes deux écrans fonctionne quand j'arrive sur la fenêtre de connexion de Ubuntu.
J'ai bien paramétré comme dans le tutorial, mais rien n'y fait, j'ai toujours qu'un seul et unique moniteur dans la fenêtre de résolutions des écrans.

je vous met mon xorg.conf :

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Mon Oct 16 22:13:07 PDT 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen 0       "Screen0"
    Screen 1       "Screen1" RightOf "Screen0"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/usr/share/fonts/X11/misc"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fr"
    Option         "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ExplorerPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "VX2025wm-0"
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "VX2025wm-1"
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT] 0"
    Driver         "nvidia"
    Screen 0
#    BusID          "PCI:4:0:0"
EndSection

Section "Device"
    Identifier     "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT] 1"
    Driver         "nvidia"
    Screen 1
#    BusID          "PCI:4:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT] 0"
    Monitor        "VX2025wm-0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       16
        Modes      "1680x1050" "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x640" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1680x1050" "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x640" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT] 1"
    Monitor        "VX2025wm-1"
    DefaultDepth    24
    SubSection     "Display"
        Depth       16
        Modes      "1680x1050" "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x640" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1680x1050" "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x640" "640x480"
    EndSubSection
EndSection

Vous verrez cette ligne : BusID          "PCI:4:0:0" en commentaire dans les sections "Device", c'est qu'elle n'était pas là par défaut et qu'elle fait planter mon serveur X quand je la met.

Pour information, mon matériel graphique :
- GeForce 6600 GT 128Mo avec deux sorties DVI
- 2 x écran ViewSonic VX2025wm (LCD) connectés en DVI sur la carte graphique

Si vous pouviez m'aider, ça serait sympa.
Byeee,
Gigi

traaf

Re : Multi-écran

tu dois indiquer le busid correspondant a ta configuration
(le même que dans ton xorg.conf d'origine)

---

Vault106, musique libre, enjoy it /!\

midtownmad

Re : Multi-écran

J'étais en train de chercher comment trouver le bus pci de ma carte graphique, et tu confirme mon idée de départ.
Ca marche bien , merci de ton aide.

Il serait bien d'ajouter au tutorial les commandes pour trouver le bus pci de sa carte :

# update-pciids
# lspci