Ubuntu-fr

Nono44

Beryl + NVIDIA geforce FX 5500 Freeze

Bonjour,
J'envoie ce message car j'ai un problème avec Beryl.
J'ai installé beryl en suivant ce tuto:
http://doc.ubuntu-fr.org/applications/beryl

Je n'ai eu aucun problème lors de l'installation, beryl fonctionne correctement lorsque je le lance seulement, au bout de quelques minutes mon PC se fige et je n'ai trouvé qu'une solution à cela.

La séquence "ctrl" + "alt" + "impr ecran syst" + "k" ce qui coupe le serveur graphique et le relance.
Je n'ai jamais réussi à utiliser le couple beryl + aiglx plus de 10 minutes.

Ma config:

Carte Graphique NVIDIA geforce Fx 5500 Tornado 128 M Ram
Asus A7N8xe-deluxe
Ram 1024  corsair
Proc Athlon 2600 +

Voici une copie de mon Xorg.conf :

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Wed Nov  1 19:47:17 PST 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/usr/share/fonts/X11/misc"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fr"
    Option         "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ExplorerPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "Q773"
    HorizSync       30.0 - 70.0
    VertRefresh     50.0 - 150.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "NVIDIA Corporation NV34 [GeForce FX 5500]"
    Driver         "nvidia"
    Option "NvAGP" "3"
    Option         "AddARGBGLXVisuals" "true"
    Option         "TripleBuffer" "true"
    Option         "RenderAccel" "True"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "NVIDIA Corporation NV34 [GeForce FX 5500]"
    Monitor        "Q773"
    DefaultDepth    24
    
    SubSection     "Display"
        Depth       1
        Modes      "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1280x1024" "1152x864" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Enable"
EndSection

Si quelqu'un a une piste pour trouver d'ou cela vient.
En vous remerciant d'avance pour votre aide.
++
Nono44