#1 Le 29/10/2006, à 16:24
- tibordo
configuration de beryl avec les cartes ati ==> besoin d'aide
salut a tous! donc hier j'ai tenté de mettre beryl sur mon ubuntu 6.10 en utilisant ce tutorial : http://doc.ubuntu-fr.org/applications/beryl
mais le probleme c'est qu'au moment ou je suis arrivé a cette étape : Pour les cartes ATI
Driver libre RADEON
1.
Ajoutez les options qui boostent dans votre xorg.conf (sudo gedit /etc/X11/xorg.conf) dans les sections Modules et Device:
j'ai du faire une fausse manip et en rebootant je n'avai plus d'interface graphique et j'ai du réoinstaller tout mon system donc est ce que vous pourrirez me dire si les modifications sont bonnes :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
Option "AccelDFS" "1" # mettez à 0 si vous avez une carte AGP
# Option "AGPMode" "4" # Décommentez si vous avez une carte AGP
# Option "AGPSize" "128" # Décommentez si vous avec une carte AGP AGP aperture size
Option "GARTSize" "64"
Option "RingSize" "8"
Option "BufferSize" "2"
Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
Option "ColorTiling" "1"
Option "EnableDepthMoves" "yes"
Option "UseFBDev" "false"
Option "RenderAccel" "true" # Enable the hardware render acceleration
Option "mtrr" "on"
Option "SubPixelOrder" "none"
Option "DPMS"
Option "DynamicClocks" "on"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionDernière modification par Stemp (Le 29/10/2006, à 16:50)
Hors ligne
#2 Le 29/10/2006, à 16:27
- jdefaver
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
1) tu charges deux fois tous tes modules
2) tu as deux section "Device" a fusionner (il n'y a pas de device dans la seconde)
3) pour tester, vire toutes les options de ta carte graphique, ca marche de toute facon tres bien sans (j'ai jamais senti la difference)
Hors ligne
#3 Le 29/10/2006, à 16:30
- tibordo
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
oula attends merci pour ta réponse mais:
si je comprends bien il faut que je fusionne les catéguories
mais qu'est ce que tu veux dire par : tu charges deux fois touts tes modules ?
comment je fais pour virer toutes les options de ma carte graphique ?
Hors ligne
#4 Le 29/10/2006, à 16:35
- tibordo
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Driver "ati"
BusID "PCI:1:0:0"
Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
Option "AccelDFS" "1" # mettez à 0 si vous avez une carte AGP
# Option "AGPMode" "4" # Décommentez si vous avez une carte AGP
# Option "AGPSize" "128" # Décommentez si vous avec une carte AGP AGP aperture size
Option "GARTSize" "64"
Option "RingSize" "8"
Option "BufferSize" "2"
Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
Option "ColorTiling" "1"
Option "EnableDepthMoves" "yes"
Option "UseFBDev" "false"
Option "RenderAccel" "true" # Enable the hardware render acceleration
Option "mtrr" "on"
Option "SubPixelOrder" "none"
Option "DPMS"
Option "DynamicClocks" "on"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionvoila les modifications apportés la j'ai juste fuusionner mais dites moi si ca ne va pas s'il vous plait vcam'enerverai de devoir tout reformater encore une foi ^
Dernière modification par Stemp (Le 29/10/2006, à 16:51)
Hors ligne
#5 Le 29/10/2006, à 16:38
- jdefaver
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
faut jamais reformater !
Maintenant tu as tous tes modules en double (tu as remarqué que c'etaient les memes ?)
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSectionMais pour le reste c'est mieux. reste a commenter (mettre # devant) les lignes d'options de ta carte graphique.
Hors ligne
#6 Le 29/10/2006, à 16:44
- tibordo
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
Load "dbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Driver "ati"
BusID "PCI:1:0:0"
# Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
# Option "AccelDFS" "1" # mettez à 0 si vous avez une carte AGP
# Option "AGPMode" "4" # Décommentez si vous avez une carte AGP
# Option "AGPSize" "128" # Décommentez si vous avec une carte AGP AGP aperture size
# Option "GARTSize" "64"
# Option "RingSize" "8"
# Option "BufferSize" "2"
# Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
# Option "ColorTiling" "1"
# Option "EnableDepthMoves" "yes"
# Option "UseFBDev" "false"
# Option "RenderAccel" "true" # Enable the hardware render acceleration
# Option "mtrr" "on"
# Option "SubPixelOrder" "none"
# Option "DPMS"
# Option "DynamicClocks" "on"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionc'est mieux comme ca ?
Dernière modification par Stemp (Le 29/10/2006, à 16:52)
Hors ligne
#7 Le 29/10/2006, à 16:53
- Stemp
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
@tibordo : pense à mettre tes listings entre des balises Code 
«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux
Hors ligne
#8 Le 29/10/2006, à 16:54
- tibordo
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
ca veu dire quoi Stemp ???
je ne fais pas de programmation je n'y connais rien est-ce que tu pourrai etre plus explicite ?
Hors ligne
#9 Le 29/10/2006, à 17:06
- Stemp
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
Quand tu affiches des listings dans tes messages, sélectionne ces lignes et clique sur le bouton Code.
Tu peux tester ça dans le forum Éphémère si tu veux.
«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux
Hors ligne
#10 Le 29/10/2006, à 17:15
- tibordo
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
il est ou ce bouton code ?
Hors ligne
#11 Le 29/10/2006, à 17:23
- Stemp
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux
Hors ligne
#12 Le 29/10/2006, à 17:25
- tibordo
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
Load "dbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Driver "ati"
BusID "PCI:1:0:0"
# Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
# Option "AccelDFS" "1" # mettez à 0 si vous avez une carte AGP
# Option "AGPMode" "4" # Décommentez si vous avez une carte AGP
# Option "AGPSize" "128" # Décommentez si vous avec une carte AGP AGP aperture size
# Option "GARTSize" "64"
# Option "RingSize" "8"
# Option "BufferSize" "2"
# Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
# Option "ColorTiling" "1"
# Option "EnableDepthMoves" "yes"
# Option "UseFBDev" "false"
# Option "RenderAccel" "true" # Enable the hardware render acceleration
# Option "mtrr" "on"
# Option "SubPixelOrder" "none"
# Option "DPMS"
# Option "DynamicClocks" "on"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionHors ligne
#13 Le 29/10/2006, à 17:26
- tibordo
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
Load "dbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Driver "ati"
BusID "PCI:1:0:0"
# Option "AccelMethod" "XAA" # Use XFree86 Acceleration Architecture
# Option "AccelDFS" "1" # mettez à 0 si vous avez une carte AGP
# Option "AGPMode" "4" # Décommentez si vous avez une carte AGP
# Option "AGPSize" "128" # Décommentez si vous avec une carte AGP AGP aperture size
# Option "GARTSize" "64"
# Option "RingSize" "8"
# Option "BufferSize" "2"
# Option "EnablePageFlip" "1" # Enable page flipping for 3D apps
# Option "ColorTiling" "1"
# Option "EnableDepthMoves" "yes"
# Option "UseFBDev" "false"
# Option "RenderAccel" "true" # Enable the hardware render acceleration
# Option "mtrr" "on"
# Option "SubPixelOrder" "none"
# Option "DPMS"
# Option "DynamicClocks" "on"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionHors ligne
#14 Le 29/10/2006, à 17:26
- tibordo
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
oui mais apparemment je ne vois pas ce que ca apporte ...
Hors ligne
#15 Le 29/10/2006, à 18:02
- tibordo
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
up
Hors ligne
#16 Le 29/10/2006, à 19:06
- tibordo
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
up:
Hors ligne
#17 Le 29/10/2006, à 19:10
- Stemp
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
Doublon fermé http://forum.ubuntu-fr.org/viewtopic.php?id=72105
«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux
Hors ligne
#18 Le 29/10/2006, à 19:21
- tibordo
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
je fais des doublons parce que deja ca appartient a plusieurs catéguories et qu'en plus personne ne me répond ca fait plus de 10 heures que je suis dessus !
donc j'aimerai franchement un coup de main svp
Hors ligne
#19 Le 29/10/2006, à 19:30
- jdefaver
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
Bon, hormis le fait que tu n'as rien a exiger et que ton ton est un peu lourd, la reponse a ton probleme est :
Section "Extensions"
Option "RENDER" "Enable"
EndSectionc'est ce qui manque a la fin de ton xorg. J'espere que cette satisfaction rapide (10 heures d'attente pour avoir la 3D, quel enfer 
) t'aideras a etre plus poli la prochaines fois.
Hors ligne
#20 Le 29/10/2006, à 19:46
- tibordo
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
merci bcp
Hors ligne
#21 Le 29/10/2006, à 19:48
- tibordo
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
mais apparemment ca n'arrange pas le probleme ...
Hors ligne
#22 Le 29/10/2006, à 20:19
- Stemp
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
Et quel sont tes problèmes ?
Si c'est au sujet des tablettes wacom, ce n'est pas grave.
«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux
Hors ligne
#23 Le 29/10/2006, à 21:07
- tibordo
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
mon probleme c'est que je n'arrive pas a avoir l'acceleration 3D alors que j'ai fait otut ce qui a été dit ...
Hors ligne
#24 Le 30/10/2006, à 16:01
- parsimony
Re : configuration de beryl avec les cartes ati ==> besoin d'aide
apparement tu utilise "ati" comme driver choisis plutôt "radeon"
c'est dans :
Section "Device"
Identifier "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Driver "ati"tu remplaces par :
Section "Device"
Identifier "ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
Driver "radeon"Cubuntu 14.04
i7-4750HQ CPU @ 2.00GHz × 8
Hors ligne