Ubuntu-fr

Osiriis

[ Problème ] USB ne marche pas .

Bonjour a tous .

Je vient poster ici car j'ai un petit soucis avec mes port USB .

Il m'est impossible de connecter quelques Clé , Imprimante , Appareil Photos , Téléphone portable via mes USB .
Après avoir essayer plusieurs fois de savoir de quoi il s'agit , j'ai décider d'abandonner ...

Cela me donne :

george@pc-portable:~$ /bin/dmesg | grep usb
[   20.371072] usbcore: registered new interface driver usbfs
[   20.371099] usbcore: registered new interface driver hub
[   20.396041] usbcore: registered new device driver usb
[   22.108350] usb usb1: configuration #1 chosen from 1 choice
[   22.268071] usb usb2: configuration #1 chosen from 1 choice
[   22.383932] usb usb3: configuration #1 chosen from 1 choice
[ 1380.752023] usb 3-1: new high speed USB device using ehci_hcd and address 10
[ 1395.839119] usb 3-1: device descriptor read/64, error -110
[ 1408.110641] usb usb3: USB disconnect, address 1
[ 1412.020377] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 1412.200071] usb 1-1: device descriptor read/64, error -62
[ 1412.483595] usb 1-1: device descriptor read/64, error -62
[ 1412.767115] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 1412.950842] usb 1-1: device descriptor read/64, error -62
[ 1413.234424] usb 1-1: device descriptor read/64, error -62
[ 1413.514062] usb 1-1: new full speed USB device using ohci_hcd and address 4
[ 1413.921231] usb 1-1: device not accepting address 4, error -62
[ 1414.096959] usb 1-1: new full speed USB device using ohci_hcd and address 5
[ 1414.503955] usb 1-1: device not accepting address 5, error -62
[ 1430.113493] usb 1-1: new full speed USB device using ohci_hcd and address 6
[ 1430.293177] usb 1-1: device descriptor read/64, error -62
[ 1430.576724] usb 1-1: device descriptor read/64, error -62
[ 1430.848279] usb 1-1: new full speed USB device using ohci_hcd and address 7
[ 1431.027973] usb 1-1: device descriptor read/64, error -62
[ 1431.311535] usb 1-1: device descriptor read/64, error -62
[ 1431.591055] usb 1-1: new full speed USB device using ohci_hcd and address 8
[ 1431.998292] usb 1-1: device not accepting address 8, error -62
[ 1432.174037] usb 1-1: new full speed USB device using ohci_hcd and address 9
[ 1432.582143] usb 1-1: device not accepting address 9, error -62
[ 1481.801802] usb 1-1: new full speed USB device using ohci_hcd and address 10
[ 1481.981511] usb 1-1: device descriptor read/64, error -62
[ 1482.265047] usb 1-1: device descriptor read/64, error -62
[ 1482.544581] usb 1-1: new full speed USB device using ohci_hcd and address 11
[ 1482.724363] usb 1-1: device descriptor read/64, error -62
[ 1483.008646] usb 1-1: device descriptor read/64, error -62
[ 1483.287355] usb 1-1: new full speed USB device using ohci_hcd and address 12
[ 1483.694588] usb 1-1: device not accepting address 12, error -62
[ 1483.870307] usb 1-1: new full speed USB device using ohci_hcd and address 13
[ 1484.277579] usb 1-1: device not accepting address 13, error -62

Et avec la commande : lsusb sans périphérique connecté

george@pc-portable:~$ lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

Lorsque que je connecte un périphérique .

george@pc-portable:~$ lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

Merci de répondre dans les plus bref délai .