Pages : 1
#1 Le 27/11/2008, à 09:11
- zouky38
Unbuntu freeze quoi qu'il arrive
Bonjour,
Mon problème est le suivant :
Je veut tester Ubuntu 8.10, donc je boot le live cd et arrivé à l'interface graphique, sa freeze (le temps varie, des fois il y a juste le fond d'écran qui apparait). Je ne peut plus rien faire, même pas ctrl + alt + f1.
Bonjour,
J'ai donc regravé plusieurs cd de différentes version pour voir si mon iso était défectueux, mais non toujours le même problème avec les autres.
Je décide de l'installer en passant par Wubi, l'installation ce fait bien mais une fois arriver sur la session sa freeze à n'importe quel moment.
Un peu énerver je tente une dernière option, mettre mon disque dur sur mon deuxième pc et installer ubuntu à partir de celui-ci, ce qui est parfaitement fait.
Je remonte mon disque dur sur mon pc, et là toujour pareil, ubuntu ce lance mais freeze a un certain moment.
svp aidez moi je ne sais vraiment plus quoi faire:(
Merci d'avance
Config: Elitegroup nforce4-a939
Nvidia 7600gt
Amd 3500+
2go ram ddr
Hors ligne
#2 Le 27/11/2008, à 12:40
- andso
Re : Unbuntu freeze quoi qu'il arrive
bonjour,
as tu fait un test mémoire poussé?
peux tu poster /var/log/dmesg ?
IMPORTANT: Booster votre (X et K)ubuntu: http://forum.ubuntu-fr.org/viewtopic.php?id=241092 (pfou!...)
à essayer, et... demain debian? http://fr.wikipedia.org/wiki/Demain_les_chiens
demain les biens? mes biens biens? t' exagére ... la banque!
Hors ligne
#3 Le 27/11/2008, à 12:49
- Dji_Pih
Re : Unbuntu freeze quoi qu'il arrive
Ca sent le pb hardware : fais un test avec un autre DD pour savoir s'il n'est pas HS
1/ Ubuntu 10.10 / Intel DualCore E2180 2GHz / 2Go RAM / DD 320Go
2/ Konica Magicolor 2350 / 192MoRAM / HPJetDirect / Postscript Level 3
3/ MiniLiveBox 2 / Switch D-Link / Orange Open Mini
Hors ligne
#4 Le 27/11/2008, à 14:32
- andso
Re : Unbuntu freeze quoi qu'il arrive
@ Dji_Pih :
il a déjà testé son dd sur un autre ordi
je dis, primo, test memoires car linux y est plus sensible que ouinedose
edit: je m' en suis rendu compte lors de ma migration, le xp tournait avec une adresse mem vérolée, d' oû ennuis, pas le gnou
Dernière modification par andso (Le 27/11/2008, à 14:35)
IMPORTANT: Booster votre (X et K)ubuntu: http://forum.ubuntu-fr.org/viewtopic.php?id=241092 (pfou!...)
à essayer, et... demain debian? http://fr.wikipedia.org/wiki/Demain_les_chiens
demain les biens? mes biens biens? t' exagére ... la banque!
Hors ligne
#5 Le 27/11/2008, à 18:35
- zouky38
Re : Unbuntu freeze quoi qu'il arrive
J'ai tester toute les barettes une par une et toutes ensemble, aucun probleme.
Andso comme je suis débutant pourrait tu m'expliquer comment avoir /var/log/dmesg stp.
J'ai essayer sur 3 DD sur mon pc mais toujours pareil, je pense a un problème matériel...
Hors ligne
#6 Le 27/11/2008, à 20:42
- andso
Re : Unbuntu freeze quoi qu'il arrive
d' acc avec toi
Tu as verifié le refroidissement de ta cpu? ou sa température ds le bios ou par xsensors (installé via synaptic)...
nautilus--> système fichiers---> /var/log/dmesg clic D --->ouvrir
IMPORTANT: Booster votre (X et K)ubuntu: http://forum.ubuntu-fr.org/viewtopic.php?id=241092 (pfou!...)
à essayer, et... demain debian? http://fr.wikipedia.org/wiki/Demain_les_chiens
demain les biens? mes biens biens? t' exagére ... la banque!
Hors ligne
#7 Le 27/11/2008, à 21:05
- zouky38
Re : Unbuntu freeze quoi qu'il arrive
Mon cpu est a 37°. J'ai d'atteindre ce dossier mais rien a faire sa freeze toujours avant. Est ce bon si je branche mon DD sur un autre pc et que je le prend a partir de la bas? enfait tu me demande un log des erreurs la ?
Hors ligne
#8 Le 27/11/2008, à 21:25
- zouky38
Re : Unbuntu freeze quoi qu'il arrive
J'ai eu le temps d'ouvrir le log:)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 (Ubuntu 2.6.27-7.14-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[ 0.000000] RAMDISK: 37823000 - 37fef7d9
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP 000F75B0, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 7FEE3040, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 7FEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 7FEE3180, 6472 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 7FEE0000, 0040
[ 0.000000] ACPI: SSDT 7FEE9700, 00F7 (r1 PTLTD POWERNOW 1 LTP 1)
[ 0.000000] ACPI: SRAT 7FEE9840, 0090 (r1 AMD HAMMER 1 AMD 1)
[ 0.000000] ACPI: MCFG 7FEE9940, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 7FEE9640, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00008000 - 0000f000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[ 0.000000] #4 [0037823000 - 0037fef7d9] RAMDISK ==> [0037823000 - 0037fef7d9]
[ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[ 0.000000] #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f36c0] 000f36c0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x0007fee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fee0
[ 0.000000] On node 0 totalpages: 523903
[ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 292034 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519297
[ 0.000000] Kernel command line: root=UUID=fe469898-45da-410c-9756-736d65fb2877 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 2211.290 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2062556k/2096000k available (2572k kernel code, 32248k reserved, 1160k data, 424k init, 1178496k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4422.58 BogoMIPS (lpj=8845160)
[ 0.004026] Security Framework initialized
[ 0.004032] SELinux: Disabled at boot.
[ 0.004054] AppArmor: AppArmor initialized
[ 0.004061] Mount-cache hash table entries: 512
[ 0.004202] Initializing cgroup subsys ns
[ 0.004205] Initializing cgroup subsys cpuacct
[ 0.004208] Initializing cgroup subsys memory
[ 0.004220] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004223] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004232] Checking 'hlt' instruction... OK.
[ 0.020327] SMP alternatives: switching to UP code
[ 0.024009] ACPI: Core revision 20080609
[ 0.025861] ACPI: Checking initramfs for custom DSDT
[ 0.332210] ENABLING IO-APIC IRQs
[ 0.332389] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.373231] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
[ 0.376023] Brought up 1 CPUs
[ 0.376023] Total of 1 processors activated (4422.58 BogoMIPS).
[ 0.376023] CPU0 attaching sched-domain:
[ 0.376023] domain 0: span 0 level CPU
[ 0.376023] groups: 0
[ 0.376023] net_namespace: 840 bytes
[ 0.376023] Booting paravirtualized kernel on bare hardware
[ 0.376023] Time: 21:12:26 Date: 11/27/08
[ 0.376023] NET: Registered protocol family 16
[ 0.376023] EISA bus registered
[ 0.376023] ACPI: bus type pci registered
[ 0.376023] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.376023] PCI: MCFG area at e0000000 reserved in E820
[ 0.376023] PCI: Using MMCONFIG for extended config space
[ 0.376023] PCI: Using configuration type 1 for base access
[ 0.376023] ACPI: EC: Look up EC in DSDT
[ 0.382785] ACPI: Interpreter enabled
[ 0.382788] ACPI: (supports S0 S3 S4 S5)
[ 0.382801] ACPI: Using IOAPIC for interrupt routing
[ 0.392918] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.393029] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.393043] PCI: 0000:00:01.1 reg 10 io port: [fc00, fc1f]
[ 0.393051] PCI: 0000:00:01.1 reg 20 io port: [1c00, 1c3f]
[ 0.393055] PCI: 0000:00:01.1 reg 24 io port: [1c40, 1c7f]
[ 0.393064] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.393067] pci 0000:00:01.1: PME# disabled
[ 0.393083] PCI: 0000:00:02.0 reg 10 32bit mmio: [fe02f000, fe02ffff]
[ 0.393098] pci 0000:00:02.0: supports D1
[ 0.393100] pci 0000:00:02.0: supports D2
[ 0.393102] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.393104] pci 0000:00:02.0: PME# disabled
[ 0.393119] PCI: 0000:00:02.1 reg 10 32bit mmio: [fe02e000, fe02e0ff]
[ 0.393137] pci 0000:00:02.1: supports D1
[ 0.393138] pci 0000:00:02.1: supports D2
[ 0.393140] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.393143] pci 0000:00:02.1: PME# disabled
[ 0.393160] PCI: 0000:00:04.0 reg 10 io port: [f000, f0ff]
[ 0.393163] PCI: 0000:00:04.0 reg 14 io port: [ec00, ecff]
[ 0.393167] PCI: 0000:00:04.0 reg 18 32bit mmio: [fe02d000, fe02dfff]
[ 0.393179] pci 0000:00:04.0: supports D1
[ 0.393181] pci 0000:00:04.0: supports D2
[ 0.393198] PCI: 0000:00:06.0 reg 20 io port: [e000, e00f]
[ 0.393217] PCI: 0000:00:07.0 reg 10 io port: [9f0, 9f7]
[ 0.393220] PCI: 0000:00:07.0 reg 14 io port: [bf0, bf3]
[ 0.393224] PCI: 0000:00:07.0 reg 18 io port: [970, 977]
[ 0.393227] PCI: 0000:00:07.0 reg 1c io port: [b70, b73]
[ 0.393231] PCI: 0000:00:07.0 reg 20 io port: [cc00, cc0f]
[ 0.393235] PCI: 0000:00:07.0 reg 24 32bit mmio: [fe02b000, fe02bfff]
[ 0.393252] PCI: 0000:00:08.0 reg 10 io port: [9e0, 9e7]
[ 0.393255] PCI: 0000:00:08.0 reg 14 io port: [be0, be3]
[ 0.393259] PCI: 0000:00:08.0 reg 18 io port: [960, 967]
[ 0.393262] PCI: 0000:00:08.0 reg 1c io port: [b60, b63]
[ 0.393266] PCI: 0000:00:08.0 reg 20 io port: [b800, b80f]
[ 0.393270] PCI: 0000:00:08.0 reg 24 32bit mmio: [fe02a000, fe02afff]
[ 0.393295] PCI: 0000:00:0a.0 reg 10 32bit mmio: [fe029000, fe029fff]
[ 0.393299] PCI: 0000:00:0a.0 reg 14 io port: [b400, b407]
[ 0.393313] pci 0000:00:0a.0: supports D1
[ 0.393314] pci 0000:00:0a.0: supports D2
[ 0.393316] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.393319] pci 0000:00:0a.0: PME# disabled
[ 0.393341] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.393344] pci 0000:00:0b.0: PME# disabled
[ 0.393364] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.393366] pci 0000:00:0c.0: PME# disabled
[ 0.393386] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.393389] pci 0000:00:0d.0: PME# disabled
[ 0.393409] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.393411] pci 0000:00:0e.0: PME# disabled
[ 0.393499] PCI: 0000:01:07.0 reg 10 io port: [ac00, acff]
[ 0.393526] pci 0000:01:07.0: supports D1
[ 0.393527] pci 0000:01:07.0: supports D2
[ 0.393548] pci 0000:00:09.0: transparent bridge
[ 0.393550] PCI: bridge 0000:00:09.0 io port: [a000, afff]
[ 0.393553] PCI: bridge 0000:00:09.0 32bit mmio: [fde00000, fdefffff]
[ 0.393556] PCI: bridge 0000:00:09.0 32bit mmio pref: [fdf00000, fdffffff]
[ 0.393588] PCI: bridge 0000:00:0b.0 io port: [9000, 9fff]
[ 0.393590] PCI: bridge 0000:00:0b.0 32bit mmio: [fdd00000, fddfffff]
[ 0.393594] PCI: bridge 0000:00:0b.0 64bit mmio pref: [fdc00000, fdcfffff]
[ 0.393625] PCI: bridge 0000:00:0c.0 io port: [8000, 8fff]
[ 0.393628] PCI: bridge 0000:00:0c.0 32bit mmio: [fdb00000, fdbfffff]
[ 0.393632] PCI: bridge 0000:00:0c.0 64bit mmio pref: [fda00000, fdafffff]
[ 0.393663] PCI: bridge 0000:00:0d.0 io port: [7000, 7fff]
[ 0.393665] PCI: bridge 0000:00:0d.0 32bit mmio: [fd900000, fd9fffff]
[ 0.393669] PCI: bridge 0000:00:0d.0 64bit mmio pref: [fd800000, fd8fffff]
[ 0.393690] PCI: 0000:05:00.0 reg 10 32bit mmio: [fa000000, faffffff]
[ 0.393694] PCI: 0000:05:00.0 reg 14 32bit mmio: [d0000000, dfffffff]
[ 0.393704] PCI: 0000:05:00.0 reg 1c 64bit mmio: [fb000000, fbffffff]
[ 0.393708] PCI: 0000:05:00.0 reg 24 io port: [6c00, 6c7f]
[ 0.393713] PCI: 0000:05:00.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.393749] PCI: bridge 0000:00:0e.0 io port: [6000, 6fff]
[ 0.393752] PCI: bridge 0000:00:0e.0 32bit mmio: [fa000000, fcffffff]
[ 0.393755] PCI: bridge 0000:00:0e.0 64bit mmio pref: [d0000000, dfffffff]
[ 0.393765] bus 00 -> node 0
[ 0.393772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.394207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.469888] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.470085] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.470280] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.470472] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.470665] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.470859] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.471052] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.471247] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.471441] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.471638] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.471833] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.472027] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.472225] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.472430] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.472635] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.472840] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.473059] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.473271] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.473482] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.473697] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.473834] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.474054] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.474275] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.474495] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.474715] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.474935] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
[ 0.475155] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.475374] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.475594] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.475823] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.476059] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.476289] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.476469] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.476499] pnp: PnP ACPI init
[ 0.476506] ACPI: bus type pnp registered
[ 0.483051] pnp: PnP ACPI: found 14 devices
[ 0.483054] ACPI: ACPI bus type pnp unregistered
[ 0.483057] PnPBIOS: Disabled by ACPI PNP
[ 0.483350] PCI: Using ACPI for IRQ routing
[ 0.483446] NET: Registered protocol family 8
[ 0.483446] NET: Registered protocol family 20
[ 0.483446] NetLabel: Initializing
[ 0.483446] NetLabel: domain hash size = 128
[ 0.483446] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.483446] NetLabel: unlabeled traffic allowed by default
[ 0.484045] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.484047] actual entries 65620
[ 0.484162] AppArmor: AppArmor Filesystem Enabled
[ 0.484188] ACPI: RTC can wake from S4
[ 0.484194] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.484194] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.484194] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.484194] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.484194] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.484194] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.484194] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.484194] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.484194] system 00:02: ioport range 0x290-0x30f has been reserved
[ 0.484194] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.484194] system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.484194] system 00:0d: iomem range 0xd1800-0xd3fff has been reserved
[ 0.484194] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.484194] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.484194] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.484194] system 00:0d: iomem range 0x7fee0000-0x7fefffff could not be reserved
[ 0.484194] system 00:0d: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.484194] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.484194] system 00:0d: iomem range 0x100000-0x7fedffff could not be reserved
[ 0.484194] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.484194] system 00:0d: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.484194] system 00:0d: iomem range 0xfefff000-0xfeffffff could not be reserved
[ 0.484194] system 00:0d: iomem range 0xfff80000-0xfff80fff could not be reserved
[ 0.484194] system 00:0d: iomem range 0xfff90000-0xfffbffff could not be reserved
[ 0.484194] system 00:0d: iomem range 0xfffed000-0xfffeffff could not be reserved
[ 0.519254] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.519257] pci 0000:00:09.0: IO window: 0xa000-0xafff
[ 0.519261] pci 0000:00:09.0: MEM window: 0xfde00000-0xfdefffff
[ 0.519264] pci 0000:00:09.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.519268] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.519270] pci 0000:00:0b.0: IO window: 0x9000-0x9fff
[ 0.519273] pci 0000:00:0b.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.519276] pci 0000:00:0b.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
[ 0.519280] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[ 0.519283] pci 0000:00:0c.0: IO window: 0x8000-0x8fff
[ 0.519286] pci 0000:00:0c.0: MEM window: 0xfdb00000-0xfdbfffff
[ 0.519289] pci 0000:00:0c.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
[ 0.519292] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
[ 0.519295] pci 0000:00:0d.0: IO window: 0x7000-0x7fff
[ 0.519298] pci 0000:00:0d.0: MEM window: 0xfd900000-0xfd9fffff
[ 0.519301] pci 0000:00:0d.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
[ 0.519311] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
[ 0.519313] pci 0000:00:0e.0: IO window: 0x6000-0x6fff
[ 0.519316] pci 0000:00:0e.0: MEM window: 0xfa000000-0xfcffffff
[ 0.519319] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.519328] pci 0000:00:09.0: setting latency timer to 64
[ 0.519334] pci 0000:00:0b.0: setting latency timer to 64
[ 0.519338] pci 0000:00:0c.0: setting latency timer to 64
[ 0.519343] pci 0000:00:0d.0: setting latency timer to 64
[ 0.519347] pci 0000:00:0e.0: setting latency timer to 64
[ 0.519350] bus: 00 index 0 io port: [0, ffff]
[ 0.519352] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.519355] bus: 01 index 0 io port: [a000, afff]
[ 0.519357] bus: 01 index 1 mmio: [fde00000, fdefffff]
[ 0.519359] bus: 01 index 2 mmio: [fdf00000, fdffffff]
[ 0.519361] bus: 01 index 3 io port: [0, ffff]
[ 0.519363] bus: 01 index 4 mmio: [0, ffffffff]
[ 0.519365] bus: 02 index 0 io port: [9000, 9fff]
[ 0.519367] bus: 02 index 1 mmio: [fdd00000, fddfffff]
[ 0.519369] bus: 02 index 2 mmio: [fdc00000, fdcfffff]
[ 0.519371] bus: 02 index 3 mmio: [0, 0]
[ 0.519373] bus: 03 index 0 io port: [8000, 8fff]
[ 0.519375] bus: 03 index 1 mmio: [fdb00000, fdbfffff]
[ 0.519377] bus: 03 index 2 mmio: [fda00000, fdafffff]
[ 0.519379] bus: 03 index 3 mmio: [0, 0]
[ 0.519381] bus: 04 index 0 io port: [7000, 7fff]
[ 0.519383] bus: 04 index 1 mmio: [fd900000, fd9fffff]
[ 0.519385] bus: 04 index 2 mmio: [fd800000, fd8fffff]
[ 0.519387] bus: 04 index 3 mmio: [0, 0]
[ 0.519389] bus: 05 index 0 io port: [6000, 6fff]
[ 0.519391] bus: 05 index 1 mmio: [fa000000, fcffffff]
[ 0.519393] bus: 05 index 2 mmio: [d0000000, dfffffff]
[ 0.519395] bus: 05 index 3 mmio: [0, 0]
[ 0.519404] NET: Registered protocol family 2
[ 0.519430] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.519430] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.520052] Switched to high resolution mode on CPU 0
[ 0.520415] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.520721] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.520724] TCP reno registered
[ 0.520846] NET: Registered protocol family 1
[ 0.520953] checking if image is initramfs... it is
[ 1.147884] Freeing initrd memory: 7985k freed
[ 1.148656] audit: initializing netlink socket (disabled)
[ 1.148670] type=2000 audit(1227820346.148:1): initialized
[ 1.154134] highmem bounce pool size: 64 pages
[ 1.154140] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.156396] VFS: Disk quotas dquot_6.5.1
[ 1.156494] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.156594] msgmni has been set to 1743
[ 1.156703] io scheduler noop registered
[ 1.156706] io scheduler anticipatory registered
[ 1.156708] io scheduler deadline registered
[ 1.156718] io scheduler cfq registered (default)
[ 1.156737] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.172069] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.172076] pci 0000:00:0b.0: Found enabled HT MSI Mapping
[ 1.172081] pci 0000:00:0b.0: Linking AER extended capability
[ 1.172089] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.172096] pci 0000:00:0c.0: Found enabled HT MSI Mapping
[ 1.172099] pci 0000:00:0c.0: Linking AER extended capability
[ 1.172107] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 1.172114] pci 0000:00:0d.0: Found enabled HT MSI Mapping
[ 1.172117] pci 0000:00:0d.0: Linking AER extended capability
[ 1.172125] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.172131] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[ 1.172134] pci 0000:00:0e.0: Linking AER extended capability
[ 1.172150] pci 0000:05:00.0: Boot video device
[ 1.172245] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 1.172266] pcieport-driver 0000:00:0b.0: found MSI capability
[ 1.172284] pci_express 0000:00:0b.0:pcie00: allocate port service
[ 1.172330] pci_express 0000:00:0b.0:pcie03: allocate port service
[ 1.172395] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.172415] pcieport-driver 0000:00:0c.0: found MSI capability
[ 1.172430] pci_express 0000:00:0c.0:pcie00: allocate port service
[ 1.172469] pci_express 0000:00:0c.0:pcie03: allocate port service
[ 1.172533] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 1.172554] pcieport-driver 0000:00:0d.0: found MSI capability
[ 1.172568] pci_express 0000:00:0d.0:pcie00: allocate port service
[ 1.172608] pci_express 0000:00:0d.0:pcie03: allocate port service
[ 1.172673] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[ 1.172693] pcieport-driver 0000:00:0e.0: found MSI capability
[ 1.172707] pci_express 0000:00:0e.0:pcie00: allocate port service
[ 1.172746] pci_express 0000:00:0e.0:pcie03: allocate port service
[ 1.173030] isapnp: Scanning for PnP cards...
[ 1.525450] isapnp: No Plug & Play device found
[ 1.560642] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.560759] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.561370] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.563085] brd: module loaded
[ 1.563161] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.563279] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.565861] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.565868] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.566227] mice: PS/2 mouse device common for all mice
[ 1.566367] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.566387] rtc0: alarms up to one year, y3k
[ 1.566510] EISA: Probing bus 0 at eisa.0
[ 1.566516] Cannot allocate resource for EISA slot 1
[ 1.566526] Cannot allocate resource for EISA slot 6
[ 1.566528] Cannot allocate resource for EISA slot 7
[ 1.566530] Cannot allocate resource for EISA slot 8
[ 1.566532] EISA: Detected 0 cards.
[ 1.566535] cpuidle: using governor ladder
[ 1.566537] cpuidle: using governor menu
[ 1.566962] TCP cubic registered
[ 1.566986] Using IPI No-Shortcut mode
[ 1.567171] registered taskstats version 1
[ 1.567279] Magic number: 0:457:248
[ 1.567311] tty ttyw4: hash matches
[ 1.567436] rtc_cmos 00:04: setting system clock to 2008-11-27 21:12:27 UTC (1227820347)
[ 1.567439] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.567441] EDD information not available.
[ 1.567670] Freeing unused kernel memory: 424k freed
[ 1.567723] Write protecting the kernel text: 2576k
[ 1.567764] Write protecting the kernel read-only data: 936k
[ 1.596157] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.752190] fuse init (API version 7.9)
[ 1.899071] fan PNP0C0B:00: registered as cooling_device0
[ 1.899077] ACPI: Fan [FAN] (on)
[ 1.906126] processor ACPI0007:00: registered as cooling_device1
[ 1.909467] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.911666] ACPI: Thermal Zone [THRM] (40 C)
[ 2.696253] usbcore: registered new interface driver usbfs
[ 2.696275] usbcore: registered new interface driver hub
[ 2.705906] No dock devices found.
[ 2.732108] usbcore: registered new device driver usb
[ 2.747208] SCSI subsystem initialized
[ 2.747659] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
[ 2.747668] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23
[ 2.747678] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 2.747681] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 2.747720] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 2.747750] ehci_hcd 0000:00:02.1: debug port 1
[ 2.747754] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 2.747766] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000
[ 2.751471] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.766569] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.766715] usb usb1: configuration #1 chosen from 1 choice
[ 2.766744] hub 1-0:1.0: USB hub found
[ 2.766757] hub 1-0:1.0: 10 ports detected
[ 2.772245] libata version 3.00 loaded.
[ 2.972719] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 2.972729] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
[ 2.972742] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.972745] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.972767] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.972786] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000
[ 3.030401] usb usb2: configuration #1 chosen from 1 choice
[ 3.030430] hub 2-0:1.0: USB hub found
[ 3.030439] hub 2-0:1.0: 10 ports detected
[ 3.084108] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 3.132413] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 3.132776] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 3.132786] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
[ 3.132790] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 3.132814] nv_probe: set workaround bit for reversed mac addr
[ 3.220286] usb 1-2: configuration #1 chosen from 3 choices
[ 3.652581] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:14:2a:a0:ad:32
[ 3.652586] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
[ 3.655725] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 3.656203] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 3.656212] pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
[ 3.656227] pata_acpi 0000:00:07.0: setting latency timer to 64
[ 3.656234] pata_acpi 0000:00:07.0: PCI INT A disabled
[ 3.656636] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 3.656640] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
[ 3.656654] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 3.656660] pata_acpi 0000:00:08.0: PCI INT A disabled
[ 3.659059] pata_amd 0000:00:06.0: version 0.3.10
[ 3.659092] pata_amd 0000:00:06.0: setting latency timer to 64
[ 3.662627] scsi0 : pata_amd
[ 3.663592] scsi1 : pata_amd
[ 3.664438] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
[ 3.664441] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
[ 3.836289] ata1.01: ATAPI: IDE/ATAPI CD-ROM 52XS, 172G, max UDMA/33
[ 3.836302] ata1: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc000c6) ACPI=0x701f (600:60:0x1c)
[ 3.852223] ata1.01: configured for UDMA/33
[ 4.136253] ata2.01: ATA-4: ST340824A, 3.05, max UDMA/100
[ 4.136256] ata2.01: 78165360 sectors, multi 16: LBA
[ 4.136264] ata2.01: Drive reports diagnostics failure. This may indicate a drive
[ 4.136266] ata2.01: fault or invalid emulation. Contact drive vendor for information.
[ 4.136272] ata2: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc000c6) ACPI=0x3f01f (600:20:0x1c)
[ 4.144191] ata2.01: configured for UDMA/100
[ 4.144480] scsi 0:0:1:0: CD-ROM ATAPI CD-ROM 52X 172G PQ: 0 ANSI: 5
[ 4.144621] scsi 1:0:1:0: Direct-Access ATA ST340824A 3.05 PQ: 0 ANSI: 5
[ 4.144775] sata_nv 0000:00:07.0: version 3.5
[ 4.144786] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
[ 4.144824] sata_nv 0000:00:07.0: setting latency timer to 64
[ 4.145431] scsi2 : sata_nv
[ 4.145663] scsi3 : sata_nv
[ 4.145850] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 20
[ 4.145853] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 20
[ 4.464024] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.940028] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.949112] ata4.00: ATA-7: Maxtor 6V250F0, VA111630, max UDMA/133
[ 4.949115] ata4.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.965093] ata4.00: configured for UDMA/133
[ 4.965188] scsi 3:0:0:0: Direct-Access ATA Maxtor 6V250F0 VA11 PQ: 0 ANSI: 5
[ 4.965287] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
[ 4.965326] sata_nv 0000:00:08.0: setting latency timer to 64
[ 4.965759] scsi4 : sata_nv
[ 4.966632] scsi5 : sata_nv
[ 4.966820] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 23
[ 4.966823] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 23
[ 5.664029] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.672116] ata5.00: ATAPI: PIONEER DVD-RW DVR-215D, 1.13, max UDMA/66
[ 5.688114] ata5.00: configured for UDMA/66
[ 6.008020] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.013989] scsi 4:0:0:0: CD-ROM PIONEER DVD-RW DVR-215D 1.13 PQ: 0 ANSI: 5
[ 6.023505] scsi 0:0:1:0: Attached scsi generic sg0 type 5
[ 6.023539] scsi 1:0:1:0: Attached scsi generic sg1 type 0
[ 6.023571] scsi 3:0:0:0: Attached scsi generic sg2 type 0
[ 6.023602] scsi 4:0:0:0: Attached scsi generic sg3 type 5
[ 6.055004] Driver 'sr' needs updating - please use bus_type methods
[ 6.061184] sr0: scsi3-mmc drive: 8x/52x cd/rw xa/form2 cdda tray
[ 6.061189] Uniform CD-ROM driver Revision: 3.20
[ 6.061282] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 6.073436] Driver 'sd' needs updating - please use bus_type methods
[ 6.073544] sd 1:0:1:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[ 6.073564] sd 1:0:1:0: [sda] Write Protect is off
[ 6.073567] sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 6.073601] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.073670] sd 1:0:1:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[ 6.073689] sd 1:0:1:0: [sda] Write Protect is off
[ 6.073691] sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 6.073724] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.073729] sda: sda1 sda2 <sr1: scsi3-mmc drive: 12x/12x writer cd/rw xa/form2 cdda tray
[ 6.097136] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 6.118045] sda5 >
[ 6.118185] sd 1:0:1:0: [sda] Attached SCSI disk
[ 6.118273] sd 3:0:0:0: [sdb] 490234752 512-byte hardware sectors (251000 MB)
[ 6.118298] sd 3:0:0:0: [sdb] Write Protect is off
[ 6.118301] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.118342] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.118412] sd 3:0:0:0: [sdb] 490234752 512-byte hardware sectors (251000 MB)
[ 6.118434] sd 3:0:0:0: [sdb] Write Protect is off
[ 6.118436] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.118477] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.118481] sdb: sdb1
[ 6.145462] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 8.378373] PM: Starting manual resume from disk
[ 8.378377] PM: Resume from partition 8:5
[ 8.378379] PM: Checking hibernation image.
[ 8.378524] PM: Resume from disk failed.
[ 8.430108] kjournald starting. Commit interval 5 seconds
[ 8.430122] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.099011] udevd version 124 started
[ 14.784585] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 14.784590] ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM00 [0x1c40-0x1c45]
[ 14.784593] ACPI: Device needs an ACPI driver
[ 14.784632] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[ 15.006180] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 15.020045] ACPI: Power Button (FF) [PWRF]
[ 15.020170] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 15.036048] ACPI: Power Button (CM) [PWRB]
[ 15.530269] parport_pc 00:09: reported by Plug and Play ACPI
[ 15.530332] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 16.053613] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 16.053619] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[ 16.053635] Intel ICH 0000:00:04.0: setting latency timer to 64
[ 16.376034] intel8x0_measure_ac97_clock: measured 54890 usecs
[ 16.376038] intel8x0: clocking to 46909
[ 17.180415] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.190513] udev: renamed network interface eth0 to eth1
[ 17.291194] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.526388] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 17.526398] C-Media PCI 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 17.731776] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 18.556534] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 20.104208] lp0: using parport0 (interrupt-driven).
[ 20.223923] Adding 1646620k swap on /dev/sda5. Priority:-1 extents:1 across:1646620k
[ 20.774689] EXT3 FS on sda1, internal journal
[ 21.841069] type=1505 audit(1227820367.854:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4371
[ 22.016921] type=1505 audit(1227820368.030:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4376
[ 22.017130] type=1505 audit(1227820368.030:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4376
[ 22.135015] ip_tables: (C) 2000-2006 Netfilter Core TeamHors ligne
#9 Le 27/11/2008, à 23:38
- andso
Re : Unbuntu freeze quoi qu'il arrive
[ 4.136253] ata2.01: ATA-4: ST340824A, 3.05, max UDMA/100
[ 4.136256] ata2.01: 78165360 sectors, multi 16: LBA
[ 4.136264] ata2.01: Drive reports diagnostics failure. This may indicate a drive
[ 4.136266] ata2.01: fault or invalid emulation. Contact drive vendor for information.
[ 14.784590] ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM00 [0x1c40-0x1c45]
[ 14.784593] ACPI: Device needs an ACPI driver
2 anomalies
tu peux tenter de démarrer en rajoutant sur la ligne de commande après F6 : acpi=off en live (qui freeze aussi) (regardes F1)
ou au menu grub par e puis e ..... c + compliqué
IMPORTANT: Booster votre (X et K)ubuntu: http://forum.ubuntu-fr.org/viewtopic.php?id=241092 (pfou!...)
à essayer, et... demain debian? http://fr.wikipedia.org/wiki/Demain_les_chiens
demain les biens? mes biens biens? t' exagére ... la banque!
Hors ligne
#10 Le 27/11/2008, à 23:44
- AmrothFelagund
Re : Unbuntu freeze quoi qu'il arrive
Pour un vrai test de la stabilité de ta mémoire utilise Memtest qui est dans le grub.
Hors ligne
#11 Le 28/11/2008, à 00:20
- andso
Re : Unbuntu freeze quoi qu'il arrive
@ AmrothFelagund
j ' ai supposé la méthode utilisée?
me trompe-je?
comme disait zouki ça sent le hard naze tout ça?
IMPORTANT: Booster votre (X et K)ubuntu: http://forum.ubuntu-fr.org/viewtopic.php?id=241092 (pfou!...)
à essayer, et... demain debian? http://fr.wikipedia.org/wiki/Demain_les_chiens
demain les biens? mes biens biens? t' exagére ... la banque!
Hors ligne
#12 Le 30/11/2008, à 18:51
- zouky38
Re : Unbuntu freeze quoi qu'il arrive
Bon ba finalement plus rien de freeze du tout, je cherche pas a comprendre vive l'informatique.
Merci de m'avoir aidé, ando je garde tes solutions au cas ou, sa peut toujours servir;).
Bonne soirée
Hors ligne
Pages : 1