Ubuntu-fr

Le sicilien

Bloqué à LIST sur VSFTPD et Proftpd

Bonjour,

Voilà mon soucis.
Je n'arrive pas à accéder à mon ftp par mon IP internet.
J'y arrive par mon réseau local.
Le ftp se block à la LIST.
J'avais installer Proftpd et ça ne fonctionné pas , donc j'ai opté pour vsftpd et pareil.

Je suis derrière un routeur.
Les ports 21,20,22,62000,63000 sont ouvert que soit sur mon serveur et mon routeur.

J'ai beau chercher sur pas mal de site et certain on le même soucis , mais pas de solution convenable car je viens l'exposer.

Si quelqu'un aurait une idée se serait super cool , car là je galère grave.

Merci

---

Mon Site

Uggy

Re : Bloqué à LIST sur VSFTPD et Proftpd

ouvre seulement les ports:
21
62000->63000
pour ce qui concerne l'entrée pour le FTP

Configure le serveur FTP pour utiliser la tranche 62000->63000 pour le passif.
Utilise le mode passif sur le client.

Dans tous les cas, donne aussi la conf client /serveur et les logs client/serveur

Dernière modification par Uggy (Le 13/04/2008, à 13:04)

gnieark

Re : Bloqué à LIST sur VSFTPD et Proftpd

désolé du Flood

Je suis impressionné par Uggy...

---

http://blog-du-grouik.tinad.fr

Le sicilien

Re : Bloqué à LIST sur VSFTPD et Proftpd

Salut, bon tout le ports sont bien ouvert.
J'ai correctement accés en lan , mais pas moyen avec mon IP du net.
Dans les fichiers logs , y a rien de bien interresant.
Sinon voici le fichier de conf :

# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone?  vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=YES
#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
port_enable=YES
pasv_enable=YES
pasv_min_port=62000
pasv_max_port=63000
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
ascii_upload_enable=NO
ascii_download_enable=NO
#
# You may fully customise the login banner string:
ftpd_banner=Bienvenue sur le ftp Powaserv.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories.  See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
#
# Debian customization
#
# Some of vsftpd's settings don't fit the Debian filesystem layout by
# default.  These settings are more Debian-friendly.
#
# This option should be the name of a directory which is empty.  Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
# This option specifies the location of the RSA key to use for SSL
# encrypted connections.
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key

Voilou , si quelqu'un pouvait m'aider car je comprend pas du tout d'ou se problème vient.

Mici

---

Mon Site

Le sicilien

Re : Bloqué à LIST sur VSFTPD et Proftpd

Personne à une idée?

---

Mon Site

Uggy

Re : Bloqué à LIST sur VSFTPD et Proftpd

Dans tous les cas, donne aussi la conf client /serveur et les logs client/serveur

Le sicilien

Re : Bloqué à LIST sur VSFTPD et Proftpd

Salut , bon j'ai essayer en changeant le port 22 .
Est là miracle , cela fonctionne sous un autre port en mode normal.
Merci de ton aide Uggy est au plaisir de se revoir sur le forum ^^.

---

Mon Site