Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 16/04/2022, à 08:55

Phil17

[Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

Bonjour,
Message de demande d'aide relativement urgent au sujet d'une imprimante HP Deskjet 2710 qui, sur un ordinateur tournant sous Windows 7, fonctionnait parfaitement (impression et scan), mais depuis l'installation de Xubuntu 20.04, impossible de l'installer.
Hp-setup ne la voit pas sur le ou les ports USB.
Je ne sais comment l'installer en ajoutant une "nouvelle imprimante".
Merci pour votre aide.

L'imprimante est récente, appartenant à des "têtes blanches" qui ne connaissent rien à l'informatique ou à ce genre d'appareil mais écrivent leurs mémoires, donc veulent imprimer.
Je pensais que les dernières versions Xubuntu étaient assez évoluées et l'imprimante fait partie de la liste des matériels HP supportés.
J'ai essayé de suivre la doc hplip du wiki Ubuntu sans succès.
Edit : J'ouvre dans le Terminal la fenêtre de configuration d'ajout d'imprimante commande system-config-printer, l'imprimante est reconnue et ajoutée automatiquement, je demande un test d'impression, rien ne se passe, le test reste dans la file d'attente et l'imprimante est déclarée "inactive"
Je profite du w-e de Pâques en ayant rapporté l'ordinateur et l'imprimante chez moi pour essayer de l'installer.

Modération: Les tags tels que « [Urgent] » sont interdits (cf les règles)
D'accord, mes excuses les plus plates, je ne me rappelais plus ces règles.

Dernière modification par Ayral (Le 16/04/2022, à 16:34)


XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.

Hors ligne

#2 Le 16/04/2022, à 09:30

xubu1957

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

Bonjour,

Elle est branchée sur un port USB2 de l'ordi ?

Que donne :

apt-cache policy hplip
dpkg -l | grep hplip

?

Fil d'appui > Installation imprimante HP DeskJet 2710 [résolu]


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#3 Le 16/04/2022, à 09:33

grigouille

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

La réponse a ton problème est dans la doc hplip chapitre 1 "Connaître son imprimante".


Debian (xfce) 12
HP LaserJet M1132 MFP

Hors ligne

#4 Le 16/04/2022, à 09:39

Phil17

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

Bonjour Xubu, oui, sur le même port que lors de l'utilisation sous Windows 7.

gege@gege-All-Series:~$ apt-cache policy hplip
hplip:
  Installé : 3.20.3+dfsg0-2
  Candidat : 3.20.3+dfsg0-2
 Table de version :
 *** 3.20.3+dfsg0-2 500
        500 http://fr.archive.ubuntu.com/ubuntu focal/main amd64 Packages
        100 /var/lib/dpkg/status
gege@gege-All-Series:~$ 
gege@gege-All-Series:~$ dpkg -l | grep hplip
ii  hplip                                 3.20.3+dfsg0-2                      amd64        HP Linux Printing and Imaging System (HPLIP)
ii  hplip-data                            3.20.3+dfsg0-2                      all          HP Linux Printing and Imaging - data files
ii  hplip-gui                             3.20.3+dfsg0-2                      all          HP Linux Printing and Imaging - GUI utilities (Qt-based)
gege@gege-All-Series:~$ 

XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.

Hors ligne

#5 Le 16/04/2022, à 09:44

xubu1957

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#6 Le 16/04/2022, à 09:45

Phil17

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

@grigouille, je ne comprends pas ta réponse, je précise avoir été vérifier qu'elle faisait partie des imprimantes dans la liste, j'ai aussi vérifié la version minimale du pilote hplip et ses conditions d'usage sur HP Developper. Si j'ai ramené leur ordinateur (plus imprimante, clavier, souris) chez moi (47 km aller), c'est parce que j'ai essayé les divers tutoriels pour Ubuntu et Debian ou Mint sans succès.


XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.

Hors ligne

#7 Le 16/04/2022, à 09:48

Phil17

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

@xubu, excellente question, j'avais vérifié, il semblait absent, je viens de revérifier, il était là, je viens donc de le purger.

gege@gege-All-Series:~$ sudo apt purge ippusbxd
[sudo] Mot de passe de gege : 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Les paquets suivants seront ENLEVÉS :
  ippusbxd*
0 mis à jour, 0 nouvellement installés, 1 à enlever et 0 non mis à jour.
Après cette opération, 110 ko d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] 
(Lecture de la base de données... 206313 fichiers et répertoires déjà installés.
)
Suppression de ippusbxd (1.34-2ubuntu1) ...
Traitement des actions différées (« triggers ») pour man-db (2.9.1-1) ...
(Lecture de la base de données... 206302 fichiers et répertoires déjà installés.
)
Purge des fichiers de configuration de ippusbxd (1.34-2ubuntu1) ...
gege@gege-All-Series:~$ 

Donc, site à cette désinstallation, quel serait la procédure à suivre ?


XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.

Hors ligne

#8 Le 16/04/2022, à 09:53

xubu1957

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

Dans le tutoriel épinglé, sylvain 3800 a écrit :

A ] les infos sur ton système qu'il faudrait donner quelque soit le problème

c'est important donc copie colle le retour de cette commande :

 cat /etc/lsb-release && uname -ir && groups && lsusb

avec cela on saura pas mal de chose concernant ton système et son architecture c'est utile pour proposer des pilotes

B ] les infos a donner si ton problème est un problème d'impression/imprimante 

dpkg -l | grep cups
lpstat -t
/usr/sbin/lpinfo -v
cat /var/log/cups/error_log
dpkg -l | grep -v ^ii

Dernière modification par xubu1957 (Le 16/04/2022, à 09:55)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#9 Le 16/04/2022, à 09:55

grigouille

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

Phil17 a écrit :
ii  hplip                                 3.20.3+dfsg0-2                      amd64        HP Linux Printing and Imaging System (HPLIP)

Et :

HP DeskJet 2700 All-in-One Printer series  :    3.20.5


Debian (xfce) 12
HP LaserJet M1132 MFP

Hors ligne

#10 Le 16/04/2022, à 10:08

xubu1957

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#11 Le 16/04/2022, à 10:12

Phil17

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

@xubu, OK, c'est ce que je sais pas, les commandes à donner pour l'aide.
@grigouille, merci, je n'avais pas vu ça, je vais attendre la bonne commande pour éviter de gaffer.

gege@gege-All-Series:~$  cat /etc/lsb-release && uname -ir && groups && lsusb
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04.4 LTS"
5.13.0-39-generic x86_64
gege adm cdrom sudo dip plugdev lpadmin nopasswdlogin lxd sambashare
Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 007: ID 03f0:1853 HP, Inc DeskJet 2700 series
Bus 003 Device 003: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader Controller
Bus 003 Device 002: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
gege@gege-All-Series:~$ 
gege@gege-All-Series:~$ dpkg -l | grep cups
ii  bluez-cups                            5.53-0ubuntu3.5                     amd64        Bluetooth printer driver for CUPS
ii  cups                                  2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - PPD/driver support, web interface
ii  cups-browsed                          1.27.4-1                            amd64        OpenPrinting CUPS Filters - cups-browsed
ii  cups-bsd                              2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - BSD commands
ii  cups-client                           2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - client programs (SysV)
ii  cups-common                           2.3.1-9ubuntu1.1                    all          Common UNIX Printing System(tm) - common files
ii  cups-core-drivers                     2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - driverless printing
ii  cups-daemon                           2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - daemon
ii  cups-filters                          1.27.4-1                            amd64        OpenPrinting CUPS Filters - Main Package
ii  cups-filters-core-drivers             1.27.4-1                            amd64        OpenPrinting CUPS Filters - Driverless printing
ii  cups-ipp-utils                        2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - IPP developer/admin utilities
ii  cups-pk-helper                        0.2.6-1ubuntu3                      amd64        PolicyKit helper to configure cups with fine-grained privileges
ii  cups-ppdc                             2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - PPD manipulation utilities
ii  cups-server-common                    2.3.1-9ubuntu1.1                    all          Common UNIX Printing System(tm) - server common files
ii  libcups2:amd64                        2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - Core library
ii  libcups2-dev:amd64                    2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - Development files CUPS library
ii  libcupsfilters-dev:amd64              1.27.4-1                            amd64        OpenPrinting CUPS Filters - Development files for the library
ii  libcupsfilters1:amd64                 1.27.4-1                            amd64        OpenPrinting CUPS Filters - Shared library
ii  libcupsimage2:amd64                   2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - Raster image library
ii  libcupsimage2-dev:amd64               2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - Development files CUPS image library
ii  printer-driver-hpcups                 3.20.3+dfsg0-2                      amd64        HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii  python3-cups                          1.9.73-3build1                      amd64        Python3 bindings for CUPS
ii  python3-cupshelpers                   1.5.12-0ubuntu1.1                   all          Python utility modules around the CUPS printing system
gege@gege-All-Series:~$ 
gege@gege-All-Series:~$ lpstat -t
scheduler is running
no system default destination
matériel pour DeskJet_2700_series_CN0BF4A156_ : implicitclass://DeskJet_2700_series_CN0BF4A156_/
DeskJet_2700_series_CN0BF4A156_ accepte des requêtes depuis sam. 16 avril 2022 11:01:05
printer DeskJet_2700_series_CN0BF4A156_ is idle.  enabled since sam. 16 avril 2022 11:01:05
gege@gege-All-Series:~$ 
gege@gege-All-Series:~$ /usr/sbin/lpinfo -v
file cups-brf:/
network http
network beh
network https
network lpd
network ipp
network ipps
network socket
direct hp
direct hpfax
network ipp://DeskJet%202700%20series%20%5BCN0BF4A156%5D._ipp._tcp.local/
gege@gege-All-Series:~$ 
gege@gege-All-Series:~$ cat /var/log/cups/error_log
E [16/Apr/2022:09:43:20 +0200] [Job 7] Files have gone away.
E [16/Apr/2022:10:16:29 +0200] [Job 8] No suitable destination host found by cups-browsed.
E [16/Apr/2022:10:16:29 +0200] [Job 8] Job held for 300 seconds since it could not be sent.
E [16/Apr/2022:10:21:31 +0200] [Job 8] No suitable destination host found by cups-browsed.
E [16/Apr/2022:10:21:31 +0200] [Job 8] Job held for 300 seconds since it could not be sent.
W [16/Apr/2022:10:24:19 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'DeskJet_2700_series_CN0BF4A156_@localhost-Gray..\' already exists
W [16/Apr/2022:10:24:19 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'DeskJet_2700_series_CN0BF4A156_@localhost-DeviceN..\' already exists
W [16/Apr/2022:10:24:30 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'DeskJet_2700_series_CN0BF4A156_@localhost-Gray..\' already exists
W [16/Apr/2022:10:24:30 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'DeskJet_2700_series_CN0BF4A156_@localhost-DeviceN..\' already exists
W [16/Apr/2022:10:24:47 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'DeskJet_2700_series_CN0BF4A156_@localhost-Gray..\' already exists
W [16/Apr/2022:10:24:47 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'DeskJet_2700_series_CN0BF4A156_@localhost-DeviceN..\' already exists
W [16/Apr/2022:10:26:52 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'DeskJet_2700_series_CN0BF4A156_@localhost-Gray..\' already exists
W [16/Apr/2022:10:26:52 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'DeskJet_2700_series_CN0BF4A156_@localhost-DeviceN..\' already exists
W [16/Apr/2022:10:30:03 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'DeskJet_2700_series_CN0BF4A156_-Gray..\' already exists
W [16/Apr/2022:10:30:03 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'DeskJet_2700_series_CN0BF4A156_-DeviceN..\' already exists
E [16/Apr/2022:10:50:22 +0200] [Job 9] No suitable destination host found by cups-browsed.
E [16/Apr/2022:10:50:22 +0200] [Job 9] Job held for 300 seconds since it could not be sent.
E [16/Apr/2022:10:55:24 +0200] [Job 9] No suitable destination host found by cups-browsed.
E [16/Apr/2022:10:55:24 +0200] [Job 9] Job held for 300 seconds since it could not be sent.
gege@gege-All-Series:
gege@gege-All-Series:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                   Version                             Architecture Description
+++-=====================================-===================================-============-======================================================================================================
rc  language-pack-en-base                 1:20.04+20220211                    all          translations for language English
rc  language-pack-gnome-en-base           1:20.04+20220211                    all          GNOME translations for language English
gege@gege-All-Series:~$ 

Pas évident de manipuler avec leur ordinateur, mais j'y arrive.
NOTA : au moment ou j'ai passé la première commande dans le terminal, l'imprimante a imprimé une page de test... Ets-ce qu'elle se serait mise à jour en arrière plan, je n'ose y croire.
J'ai redemandé une page de test, elle l'a exécuté !
En vérifiant dans les propriétés, je peux voir le niveau d'encre et un message d'information me disant : "Imprimante "Deskjet_2700_series_CN0BF4A156_" : "wifi-not-configured-report".

Dernière modification par Phil17 (Le 16/04/2022, à 10:14)


XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.

Hors ligne

#12 Le 16/04/2022, à 10:14

grigouille

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

Il y a aussi la doc hplip.


Debian (xfce) 12
HP LaserJet M1132 MFP

Hors ligne

#13 Le 16/04/2022, à 10:17

Phil17

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

J'ai lu (et relu) cette doc la semaine dernière, j'étais chez eux lors de l'installation de Xubuntu, mais je n'y arrivais pas, peut-être que je passais une commande avant une autre ?
Pour la dernière version HPLIP 3.20.5, dois-je l'installer, suivre ce tutoriel ?

Edit :
Je viens de redémarrer l'ordinateur, l'imprimante n'existe plus alors que je l'avais déclaré par défaut.
Dois-je installer la dernière version HPLIP ?
Merci d'avance.

Dernière modification par Phil17 (Le 16/04/2022, à 10:31)


XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.

Hors ligne

#14 Le 16/04/2022, à 11:36

Phil17

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

Re...
Redémarrage de l'ordinateur après installation de la dernière version de HPLIP, l'imprimante semble reconnue (il y a eu quelques hésitations) et je peux imprimer, mais j'ai un doute car en ouvrant HP Device Manager, j'ai une erreur de communication (5012). L'imprimante est notée d'une croix rouge.

La numérisation via le Numérisateur de documents ne fonctionne pas, aucun périphérique.

Je cherche...


XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.

Hors ligne

#15 Le 16/04/2022, à 11:44

Phil17

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

voici le retour de hp-check -t, désolé, c'est long.

gege@gege-All-Series:~$ hp-check -t
/usr/bin/hp-check:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
  if 'getfacl' not in g and '' is not g and 'file' not in g:
Saving output in log file: /home/gege/hp-check.log

HP Linux Imaging and Printing System (ver. 3.20.5)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to 
determine if the proper dependencies are installed to successfully compile HPLIP.                                            
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already
built HPLIP supplied tarball has the proper dependencies installed to successfully run.                                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both        
compile- and run-time dependencies).                                                                                         

Check types:                                                                                                                 
a. EXTERNALDEP - External Dependencies                                                                                       
b. GENERALDEP - General Dependencies (required both at compile and run time)                                                 
c. COMPILEDEP - Compile time Dependencies                                                                                    
d. [All are run-time checks]                                                                                                 
PYEXT SCANCONF QUEUES PERMISSION                                                                                             

Status Types:
    OK
    MISSING       - Missing Dependency or Permission or Plug-in
    INCOMPAT      - Incompatible dependency-version or Plugin-version

|Gtk-Message: 12:40:02.742: Failed to load module "atk-bridge"
 
---------------
| SYSTEM INFO |
---------------

 Kernel: 5.13.0-39-generic #44~20.04.1-Ubuntu SMP Thu Mar 24 16:43:35 UTC 2022 GNU/Linux
 Host: gege-All-Series
 Proc: 5.13.0-39-generic #44~20.04.1-Ubuntu SMP Thu Mar 24 16:43:35 UTC 2022 GNU/Linux
 Distribution: 12 20.04
 Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.20.5
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro  20.04 version 

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.20.5

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.20.5
html=/usr/share/doc/hplip-3.20.5
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.5
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no


Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.20.5



Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = true
last_upgraded_time = 1650102104
pending_upgrade_time = 0
latest_available_version = 3.17.10

[installation]
date_time = 04/16/22 12:40:03
version = 3.20.5


 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

-------------------------
| External Dependencies |
-------------------------

 cups                 CUPS - Common Unix Printing System                           REQUIRED        1.1             2.3.1           OK         'CUPS Scheduler is running'
 gs                   GhostScript - PostScript and PDF language interpreter and previewer REQUIRED        7.05            9.50            OK         -
Gtk-Message: 12:40:04.427: Failed to load module "atk-bridge"
Gtk-Message: 12:40:04.446: Failed to load module "atk-bridge"
 xsane                xsane - Graphical scanner frontend for SANE                  OPTIONAL        0.9             0.999           OK         -
 scanimage            scanimage - Shell scanning program                           OPTIONAL        1.0             1.0.29          OK         -
 dbus                 DBus - Message bus system                                    REQUIRED        -               1.12.16         OK         -
 policykit            PolicyKit - Administrative policy framework                  OPTIONAL        -               0.105           OK         -
 network              network -wget                                                OPTIONAL        -               1.20.3          OK         -
 avahi-utils          avahi-utils                                                  OPTIONAL        -               0.7             OK         -

------------------------
| General Dependencies |
------------------------

 libjpeg              libjpeg - JPEG library                                       REQUIRED        -               -               OK         -
 cups-devel           CUPS devel- Common Unix Printing System development files    REQUIRED        -               2.3.1           OK         -
 cups-image           CUPS image - CUPS image development files                    REQUIRED        -               2.3.1           OK         -
 libpthread           libpthread - POSIX threads library                           REQUIRED        -               b'2.31'         OK         -
 libusb               libusb - USB library                                         REQUIRED        -               1.0             OK         -
 sane                 SANE - Scanning library                                      REQUIRED        -               -               OK         -
 sane-devel           SANE - Scanning library development files                    REQUIRED        -               -               OK         -
 libnetsnmp-devel     libnetsnmp-devel - SNMP networking library development files REQUIRED        5.0.9           5.8             OK         -
 libcrypto            libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.1.1           OK         -
 python3X             Python 2.2 or greater - Python programming language          REQUIRED        2.2             3.8.10          OK         -
 python3-notify2      Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL        -               -               OK         -
 python3-pyqt5-dbus   PyQt 5 DBus - DBus Support for PyQt5                         OPTIONAL        5.0             5.14.1          OK         -
 python3-pyqt5        PyQt 5- Qt interface for Python (for Qt version 4.x)         REQUIRED        5.0             5.14.1          OK         -
 python3-dbus         Python DBus - Python bindings for DBus                       REQUIRED        0.80.0          1.2.16          OK         -
 python3-xml          Python XML libraries                                         REQUIRED        -               2.2.9           OK         -
 python3-devel        Python devel - Python development files                      REQUIRED        2.2             3.8.10          OK         -
 python3-pil          PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL        -               9.1.0           OK         -
 python3-reportlab    Reportlab - PDF library for Python                           OPTIONAL        2.0             3.6.9           OK         -

--------------
| COMPILEDEP |
--------------

 libtool              libtool - Library building support services                  REQUIRED        -               2.4.6           OK         -
 gcc                  gcc - GNU Project C and C++ Compiler                         REQUIRED        -               9.4.0           OK         -
 make                 make - GNU make utility to maintain groups of programs       REQUIRED        3.0             4.2.1           OK         -

---------------------
| Python Extentions |
---------------------

 cupsext              CUPS-Extension                                               REQUIRED        -               3.20.5          OK         -
 hpmudext             IO-Extension                                                 REQUIRED        -               3.20.5          OK         -

----------------------
| Scan Configuration |
----------------------

 hpaio                HPLIP-SANE-Backend                                           REQUIRED        -               3.20.5          OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension                                          REQUIRED        -               3.20.5          OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

No Scanner found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 


Type: Printer
Device URI: hp:/usb/DeskJet_2700_series?serial=CN0BF4A156
error: Unable to communicate with device (code=12): hp:/usb/DeskJet_2700_series?serial=CN0BF4A156
error: Device not found
error: Communication status: Failed


--------------
| PERMISSION |
--------------

 
-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
None

Missing Optional Dependencies
-----------------------------
None


Total Errors: 1
Total Warnings: 0


Done.
gege@gege-All-Series:~$ 

Alors que l'imprimante est connectée et visible en USB, je ne comprends pas   :

gege@gege-All-Series:~$ lsusb 
Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 03f0:1853 HP, Inc DeskJet 2700 series
Bus 003 Device 003: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader Controller
Bus 003 Device 002: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
gege@gege-All-Series:~$ 

Dernière modification par Phil17 (Le 16/04/2022, à 11:48)


XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.

Hors ligne

#16 Le 16/04/2022, à 13:06

xubu1957

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

Vu > la réponse de ceric.

hp-plugin -i

?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#17 Le 16/04/2022, à 14:53

Phil17

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

Après ma réponse #15 au dessus, je n'ai rien fait de plus que d'éteindre ordinateur et imprimante pour déjeuner.
Au retour, démarrage ordi et imprimante, contrôle de la présence de l'imprimante dans le panneau des imprimantes, test d'impression à la volée, parfait. test de scan parfait.
Je n'ai rien fait de plus et ne comprends pas les mystères d'installation HP (que j'ai déjà expérimenté avec  mon imprimante perso, une LaserJet M283.
J'ai recommencé plusieurs fois cette manip, d'éteindre et redémarrer, c'est résolu, mais ne me demandez pas pourquoi, et c'est ce qui me gêne.
Nez en moins, j'aimerais vous remercier tous les deux chaleureusement d'avoir répondu présent à l'appel d'aide, Xubu pour m'avoir fait faire les tests de terminal pour éclaircir la situation et la réponse #10 (qui je crois a solutionné le problème, et grigouille pour avoir pointé du doigt la version de HPLIP.


XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.

Hors ligne

#18 Le 01/05/2022, à 15:49

Phil17

Re : [Résolu] HP Deskjet 2710 non reconnue sous Xubuntu

Bonjour,
Pour info, incidemment, je viens d'avoir le même problème avec mon imprimante HP MFP M283 qui fonctionnait parfaitement suite à ce  fil d'aide et à celui-ci.
J'ai dû désinstaller et réinstaller totalement.
Serait-ce un problème de mise à jour de Xubuntu ou Ubuntu qui ne colle pas avec la mise à jour HP ?
Et il n'y a pas de mise à jour automatique des pilotes par Ubuntu.

Dernière modification par Phil17 (Le 01/05/2022, à 15:50)


XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.

Hors ligne