#1 Le 16/10/2021, à 13:02
- k22bis
[Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Bonjour,
j'ai récupéré ce modèle de portable sur lequel j'ai installé une 20.04 LTS.
L'ensemble fonctionnait correctement mais l'écran ne s'allume plus depuis quelques jours
Alors ce matin j'ai branché une console sur le port VGA.
L'écran du portable reste noir mais sur cete console, je peux démarrer un mode rescue. Je vois quelques hiéroglyphes passer mais je peux me conecter à ma session.
Du coup avant de changer l'écran, je voudrais être sur que ce n'est pas la carte graphique qui se néglige.
Suis-au bon endroit pour demander de l'aide ?
Si c'est le cas, quelle est la première action que je pourrais effectuer ?
Bonne journée.
Dernière modification par k22bis (Le 07/04/2023, à 19:56)
Hors ligne
#2 Le 16/10/2021, à 14:58
- Nuliel
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Bonjour,
Au niveau modèle, est ce un Toshiba Satellite l850-15z?
Dans un premier temps, commence par donner
lspci -kpour voir si c'est une carte nvidia ou amd (ou qu'il y a que la partie graphique du processeur), et quel est le pilote utilisé.
Aussi peux tu éclairer l'écran avec une lampe afin de voir si tu as une image sans rétroéclairage? (pas simple à voir, mais important à regarder quand même)
Aussi tu parles de console, mais as tu une image ou juste une console en noir et blanc?
Dernière modification par Nuliel (Le 16/10/2021, à 15:08)
Hors ligne
#3 Le 16/10/2021, à 18:06
- k22bis
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Bonjour,
merci pour votre retour rapide.
Oui, en effet, mes doigts ont fourché, il s'agit bien d'un Toshiba Satellite l850-15z!
voici le retour :
lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Toshiba Corporation 2nd Generation Core Processor Family DRAM Controller
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
Kernel driver in use: pcieport
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
Subsystem: Toshiba Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)
Subsystem: Toshiba Corporation 7 Series/C216 Chipset Family MEI Controller
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Toshiba Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Toshiba Corporation 7 Series/C216 Chipset Family High Definition Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Toshiba Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
Subsystem: Toshiba Corporation HM76 Express Chipset LPC Controller
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
Subsystem: Toshiba Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
Subsystem: Toshiba Corporation 7 Series/C216 Chipset Family SMBus Controller
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series]
Subsystem: Toshiba Corporation Radeon HD 7670M
Kernel modules: radeon
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series]
Subsystem: Toshiba Corporation Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
08:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
Subsystem: Lite-On Communications Inc AR9485 Wireless Network Adapter
Kernel driver in use: ath9k
Kernel modules: ath9k
09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)
Subsystem: Toshiba Corporation RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Kernel driver in use: r8169
Kernel modules: r8169Concernant la console, en fait, c'est un deuxième écran que j'ai branché sur le port VGA. Avec une lampe je ne vois rien...
Dernière modification par k22bis (Le 16/10/2021, à 18:13)
Hors ligne
#4 Le 16/10/2021, à 18:12
- Nuliel
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series]
Subsystem: Toshiba Corporation Radeon HD 7670M
Kernel modules: radeonC'est pas normal, il devrait y avoir une ligne "Kernel driver in use".
Tu n'aurais pas installé un autre pilote? (catalyst même s'il faut pas l'installer?)
Tu peux donner
for file in /etc/modprobe.d/*; do echo "File: $file"; cat "$file"; echo; doneDernière modification par Nuliel (Le 16/10/2021, à 18:13)
Hors ligne
#5 Le 16/10/2021, à 18:17
- k22bis
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Je n'ai rien installé de mon fait.
voici le retour
$ for file in /etc/modprobe.d/*; do echo "File: $file"; cat "$file"; echo; done
File: /etc/modprobe.d/alsa-base.conf
# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7
# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; }
#
# Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; }
install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; }
install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; }
#
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# Cause optional modules to be loaded above sound card driver modules
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; }
# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
# Ubuntu #62691, enable MPU for snd-cmipci
options snd-cmipci mpu_port=0x330 fm_port=0x388
# Keep snd-pcsp from being loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2
File: /etc/modprobe.d/amd64-microcode-blacklist.conf
# The microcode module attempts to apply a microcode update when
# it autoloads. This is not always safe, so we block it by default.
blacklist microcode
File: /etc/modprobe.d/blacklist-ath_pci.conf
# For some Atheros 5K RF MACs, the madwifi driver loads buts fails to
# correctly initialize the hardware, leaving it in a state from
# which ath5k cannot recover. To prevent this condition, stop
# madwifi from loading by default. Use Jockey to select one driver
# or the other. (Ubuntu: #315056, #323830)
blacklist ath_pci
File: /etc/modprobe.d/blacklist.conf
# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.
# evbug is a debug tool that should be loaded explicitly
blacklist evbug
# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd
# replaced by e100
blacklist eepro100
# replaced by tulip
blacklist de4x5
# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394
# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m
# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps
# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi
# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp
# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr
# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac
File: /etc/modprobe.d/blacklist-firewire.conf
# Select the legacy firewire stack over the new CONFIG_FIREWIRE one.
blacklist ohci1394
blacklist sbp2
blacklist dv1394
blacklist raw1394
blacklist video1394
#blacklist firewire-ohci
#blacklist firewire-sbp2
File: /etc/modprobe.d/blacklist-framebuffer.conf
# Framebuffer drivers are generally buggy and poorly-supported, and cause
# suspend failures, kernel panics and general mayhem. For this reason we
# never load them automatically.
blacklist aty128fb
blacklist atyfb
blacklist radeonfb
blacklist cirrusfb
blacklist cyber2000fb
blacklist cyblafb
blacklist gx1fb
blacklist hgafb
blacklist i810fb
blacklist intelfb
blacklist kyrofb
blacklist lxfb
blacklist matroxfb_base
blacklist neofb
blacklist nvidiafb
blacklist pm2fb
blacklist rivafb
blacklist s1d13xxxfb
blacklist savagefb
blacklist sisfb
blacklist sstfb
blacklist tdfxfb
blacklist tridentfb
#blacklist vesafb
blacklist vfb
blacklist viafb
blacklist vt8623fb
blacklist udlfb
File: /etc/modprobe.d/blacklist-modem.conf
# Uncomment these entries in order to blacklist unwanted modem drivers
# blacklist snd-atiixp-modem
# blacklist snd-intel8x0m
# blacklist snd-via82xx-modem
File: /etc/modprobe.d/blacklist-oss.conf
blacklist ac97
blacklist ac97_codec
blacklist ac97_plugin_ad1980
blacklist ad1848
blacklist ad1889
blacklist adlib_card
blacklist aedsp16
blacklist ali5455
blacklist btaudio
blacklist cmpci
blacklist cs4232
blacklist cs4281
blacklist cs461x
blacklist cs46xx
blacklist emu10k1
blacklist es1370
blacklist es1371
blacklist esssolo1
blacklist forte
blacklist gus
blacklist i810_audio
blacklist kahlua
blacklist mad16
blacklist maestro
blacklist maestro3
blacklist maui
blacklist mpu401
blacklist nm256_audio
blacklist opl3
blacklist opl3sa
blacklist opl3sa2
blacklist pas2
blacklist pss
blacklist rme96xx
blacklist sb
blacklist sb_lib
blacklist sgalaxy
blacklist sonicvibes
blacklist sound
blacklist sscape
blacklist trident
blacklist trix
blacklist uart401
blacklist uart6850
blacklist via82cxxx_audio
blacklist v_midi
blacklist wavefront
blacklist ymfpci
blacklist ac97_plugin_wm97xx
blacklist ad1816
blacklist audio
blacklist awe_wave
blacklist dmasound_core
blacklist dmasound_pmac
blacklist harmony
blacklist sequencer
blacklist soundcard
blacklist usb-midi
File: /etc/modprobe.d/blacklist-rare-network.conf
# Many less commonly used network protocols have recently had various
# security flaws discovered. In an effort to reduce the scope of future
# vulnerability exploitations, they are being blacklisted here so that
# unprivileged users cannot use them by default. System owners can still
# either modify this file, or specifically modprobe any needed protocols.
# ax25
alias net-pf-3 off
# netrom
alias net-pf-6 off
# x25
alias net-pf-9 off
# rose
alias net-pf-11 off
# decnet
alias net-pf-12 off
# econet
alias net-pf-19 off
# rds
alias net-pf-21 off
# af_802154
alias net-pf-36 off
File: /etc/modprobe.d/intel-microcode-blacklist.conf
# The microcode module attempts to apply a microcode update when
# it autoloads. This is not always safe, so we block it by default.
blacklist microcode
File: /etc/modprobe.d/iwlwifi.conf
# /etc/modprobe.d/iwlwifi.conf
# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
# microcode file installed on the system. When removing iwlwifi, first
# remove the iwl?vm module and then iwlwifi.
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211Hors ligne
#6 Le 16/10/2021, à 18:19
- Nuliel
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Bizarre, le module n'est pas blacklisté, tu peux redémarrer et donner
dmesgle retour est (très) long, mais il y aura très probablement l'explication du pilote radeon qui n'est pas chargé.
Hors ligne
#7 Le 16/10/2021, à 18:21
- k22bis
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Pour ce qui est de l'image sur mon second écran branché sur le port vga, j'ai pu démarrer la session en mode rescue. J'ai donc un affichage couleur en 640 * 480 (4:3)
Hors ligne
#8 Le 16/10/2021, à 18:28
- k22bis
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Voici le retour du dmesg:
dmesg
[ 0.000000] Linux version 5.11.0-37-generic (buildd@lcy01-amd64-021) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #41~20.04.2-Ubuntu SMP Fri Sep 24 09:06:38 UTC 2021 (Ubuntu 5.11.0-37.41~20.04.2-generic 5.11.22)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-37-generic root=UUID=e385d332-f452-4fe0-8b21-8e96a9c97b00 ro recovery nomodeset dis_ucode_ldr
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aa1edfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aa1ee000-0x00000000aa976fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000aa977000-0x00000000aa999fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aa99a000-0x00000000aa99efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000aa99f000-0x00000000aefbefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aefbf000-0x00000000af6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000af6bf000-0x00000000af7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000af7bf000-0x00000000af7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000af7ff000-0x00000000af7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001ceffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: TOSHIBA SATELLITE L850-15Z/Type2 - Board Product Name1, BIOS 1.40 04/24/2012
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.671 MHz processor
[ 0.001100] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001105] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001113] last_pfn = 0x1cf000 max_arch_pfn = 0x400000000
[ 0.001119] MTRR default type: uncachable
[ 0.001121] MTRR fixed ranges enabled:
[ 0.001122] 00000-9FFFF write-back
[ 0.001124] A0000-BFFFF uncachable
[ 0.001126] C0000-E7FFF write-protect
[ 0.001127] E8000-EFFFF write-combining
[ 0.001129] F0000-FFFFF write-protect
[ 0.001130] MTRR variable ranges enabled:
[ 0.001131] 0 base 000000000 mask F80000000 write-back
[ 0.001134] 1 base 080000000 mask FC0000000 write-back
[ 0.001136] 2 base 0AF800000 mask FFF800000 uncachable
[ 0.001138] 3 base 0B0000000 mask FF0000000 uncachable
[ 0.001140] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.001141] 5 base 100000000 mask F00000000 write-back
[ 0.001143] 6 base 1CF000000 mask FFF000000 uncachable
[ 0.001145] 7 base 1D0000000 mask FF0000000 uncachable
[ 0.001147] 8 base 1E0000000 mask FE0000000 uncachable
[ 0.001148] 9 disabled
[ 0.001707] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002651] last_pfn = 0xaf800 max_arch_pfn = 0x400000000
[ 0.014227] found SMP MP-table at [mem 0x000fe200-0x000fe20f]
[ 0.014576] check: Scanning 1 areas for low memory corruption
[ 0.015098] RAMDISK: [mem 0x31abf000-0x34d56fff]
[ 0.015108] ACPI: Early table checksum verification disabled
[ 0.015112] ACPI: RSDP 0x00000000000FE020 000024 (v02 TOSASU)
[ 0.015118] ACPI: XSDT 0x00000000AF7FE210 0000A4 (v01 TOSASU TOSASU00 00000001 01000013)
[ 0.015126] ACPI: FACP 0x00000000AF7FA000 00010C (v05 TOSASU TOSASU00 00000001 ACPI 00040000)
[ 0.015134] ACPI: DSDT 0x00000000AF7DF000 017B77 (v01 TOSASU TOSASU00 00000000 ACPI 00040000)
[ 0.015140] ACPI: FACS 0x00000000AF7B2000 000040
[ 0.015144] ACPI: ECDT 0x00000000AF7FD000 0000C1 (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
[ 0.015149] ACPI: UEFI 0x00000000AF7FC000 000236 (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
[ 0.015154] ACPI: ASF! 0x00000000AF7FB000 0000A5 (v32 TOSASU TOSASU00 00000001 ACPI 00040000)
[ 0.015159] ACPI: HPET 0x00000000AF7F9000 000038 (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
[ 0.015164] ACPI: APIC 0x00000000AF7F8000 00008C (v03 TOSASU TOSASU00 00000001 ACPI 00040000)
[ 0.015169] ACPI: MCFG 0x00000000AF7F7000 00003C (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
[ 0.015174] ACPI: SLIC 0x00000000AF7DE000 000176 (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
[ 0.015179] ACPI: WDAT 0x00000000AF7DD000 000224 (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
[ 0.015184] ACPI: SSDT 0x00000000AF7DB000 001068 (v01 INSYDE CR CRB 00001000 ACPI 00040000)
[ 0.015189] ACPI: BOOT 0x00000000AF7D9000 000028 (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
[ 0.015194] ACPI: ASPT 0x00000000AF7D4000 000034 (v07 TOSASU TOSASU00 00000001 ACPI 00040000)
[ 0.015199] ACPI: FPDT 0x00000000AF7D2000 000044 (v01 TOSASU TOSASU00 00000001 ACPI 00040000)
[ 0.015204] ACPI: SSDT 0x00000000AF7D1000 0009BB (v01 INSYDE CR CRB 00003000 ACPI 00040000)
[ 0.015209] ACPI: SSDT 0x00000000AF7D0000 000A92 (v01 INSYDE CR CRB 00003000 ACPI 00040000)
[ 0.015214] ACPI: SSDT 0x00000000AF7CF000 0004AF (v01 INSYDE CR CRB 00001000 ACPI 00040000)
[ 0.015218] ACPI: Reserving FACP table memory at [mem 0xaf7fa000-0xaf7fa10b]
[ 0.015221] ACPI: Reserving DSDT table memory at [mem 0xaf7df000-0xaf7f6b76]
[ 0.015223] ACPI: Reserving FACS table memory at [mem 0xaf7b2000-0xaf7b203f]
[ 0.015225] ACPI: Reserving ECDT table memory at [mem 0xaf7fd000-0xaf7fd0c0]
[ 0.015226] ACPI: Reserving UEFI table memory at [mem 0xaf7fc000-0xaf7fc235]
[ 0.015228] ACPI: Reserving ASF! table memory at [mem 0xaf7fb000-0xaf7fb0a4]
[ 0.015230] ACPI: Reserving HPET table memory at [mem 0xaf7f9000-0xaf7f9037]
[ 0.015232] ACPI: Reserving APIC table memory at [mem 0xaf7f8000-0xaf7f808b]
[ 0.015234] ACPI: Reserving MCFG table memory at [mem 0xaf7f7000-0xaf7f703b]
[ 0.015235] ACPI: Reserving SLIC table memory at [mem 0xaf7de000-0xaf7de175]
[ 0.015237] ACPI: Reserving WDAT table memory at [mem 0xaf7dd000-0xaf7dd223]
[ 0.015239] ACPI: Reserving SSDT table memory at [mem 0xaf7db000-0xaf7dc067]
[ 0.015241] ACPI: Reserving BOOT table memory at [mem 0xaf7d9000-0xaf7d9027]
[ 0.015242] ACPI: Reserving ASPT table memory at [mem 0xaf7d4000-0xaf7d4033]
[ 0.015244] ACPI: Reserving FPDT table memory at [mem 0xaf7d2000-0xaf7d2043]
[ 0.015246] ACPI: Reserving SSDT table memory at [mem 0xaf7d1000-0xaf7d19ba]
[ 0.015248] ACPI: Reserving SSDT table memory at [mem 0xaf7d0000-0xaf7d0a91]
[ 0.015250] ACPI: Reserving SSDT table memory at [mem 0xaf7cf000-0xaf7cf4ae]
[ 0.015263] ACPI: Local APIC address 0xfee00000
[ 0.015357] No NUMA configuration found
[ 0.015359] Faking a node at [mem 0x0000000000000000-0x00000001ceffffff]
[ 0.015372] NODE_DATA(0) allocated [mem 0x1cefd4000-0x1ceffdfff]
[ 0.015825] Zone ranges:
[ 0.015826] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.015829] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.015832] Normal [mem 0x0000000100000000-0x00000001ceffffff]
[ 0.015835] Device empty
[ 0.015836] Movable zone start for each node
[ 0.015841] Early memory node ranges
[ 0.015842] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.015845] node 0: [mem 0x0000000000100000-0x00000000aa1edfff]
[ 0.015847] node 0: [mem 0x00000000aa977000-0x00000000aa999fff]
[ 0.015848] node 0: [mem 0x00000000aa99f000-0x00000000aefbefff]
[ 0.015850] node 0: [mem 0x00000000af7ff000-0x00000000af7fffff]
[ 0.015851] node 0: [mem 0x0000000100000000-0x00000001ceffffff]
[ 0.015854] Initmem setup node 0 [mem 0x0000000000001000-0x00000001ceffffff]
[ 0.015857] On node 0 totalpages: 1562574
[ 0.015858] DMA zone: 64 pages used for memmap
[ 0.015860] DMA zone: 21 pages reserved
[ 0.015861] DMA zone: 3996 pages, LIFO batch:0
[ 0.015863] DMA32 zone: 11105 pages used for memmap
[ 0.015864] DMA32 zone: 710706 pages, LIFO batch:63
[ 0.015866] Normal zone: 13248 pages used for memmap
[ 0.015867] Normal zone: 847872 pages, LIFO batch:63
[ 0.015870] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.015895] On node 0, zone DMA: 99 pages in unavailable ranges
[ 0.021142] On node 0, zone DMA32: 1929 pages in unavailable ranges
[ 0.021285] On node 0, zone DMA32: 5 pages in unavailable ranges
[ 0.021314] On node 0, zone DMA32: 2112 pages in unavailable ranges
[ 0.027795] On node 0, zone Normal: 2048 pages in unavailable ranges
[ 0.027852] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.028034] ACPI: PM-Timer IO Port: 0x408
[ 0.028037] ACPI: Local APIC address 0xfee00000
[ 0.028056] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.028061] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.028064] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.028067] ACPI: IRQ0 used by override.
[ 0.028068] ACPI: IRQ9 used by override.
[ 0.028071] Using ACPI (MADT) for SMP configuration information
[ 0.028073] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.028079] TSC deadline timer available
[ 0.028081] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.028109] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.028113] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.028115] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.028116] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.028118] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.028121] PM: hibernation: Registered nosave memory: [mem 0xaa1ee000-0xaa976fff]
[ 0.028123] PM: hibernation: Registered nosave memory: [mem 0xaa99a000-0xaa99efff]
[ 0.028126] PM: hibernation: Registered nosave memory: [mem 0xaefbf000-0xaf6befff]
[ 0.028128] PM: hibernation: Registered nosave memory: [mem 0xaf6bf000-0xaf7befff]
[ 0.028129] PM: hibernation: Registered nosave memory: [mem 0xaf7bf000-0xaf7fefff]
[ 0.028132] PM: hibernation: Registered nosave memory: [mem 0xaf800000-0xafffffff]
[ 0.028134] PM: hibernation: Registered nosave memory: [mem 0xb0000000-0xdfffffff]
[ 0.028135] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.028137] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.028138] PM: hibernation: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.028140] PM: hibernation: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.028141] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.028143] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.028144] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.028146] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.028148] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.028149] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.028151] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.028152] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[ 0.028154] PM: hibernation: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[ 0.028156] [mem 0xb0000000-0xdfffffff] available for PCI devices
[ 0.028159] Booting paravirtualized kernel on bare hardware
[ 0.028162] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.028172] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.028421] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
[ 0.028433] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
[ 0.028437] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.028477] Built 1 zonelists, mobility grouping on. Total pages: 1538136
[ 0.028479] Policy zone: Normal
[ 0.028481] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-37-generic root=UUID=e385d332-f452-4fe0-8b21-8e96a9c97b00 ro recovery nomodeset dis_ucode_ldr
[ 0.028564] You have booted with nomodeset. This means your GPU drivers are DISABLED
[ 0.028565] Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly
[ 0.028567] Unless you actually understand what nomodeset does, you should reboot without enabling it
[ 0.029125] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.029384] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.029504] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.051617] Memory: 5984740K/6250296K available (14345K kernel code, 3478K rwdata, 5460K rodata, 2688K init, 5976K bss, 265296K reserved, 0K cma-reserved)
[ 0.051627] random: get_random_u64 called from __kmem_cache_create+0x2d/0x430 with crng_init=0
[ 0.051770] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.051786] Kernel/User page tables isolation: enabled
[ 0.051805] ftrace: allocating 48686 entries in 191 pages
[ 0.071849] ftrace: allocated 191 pages with 7 groups
[ 0.071996] rcu: Hierarchical RCU implementation.
[ 0.071999] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.072001] Rude variant of Tasks RCU enabled.
[ 0.072002] Tracing variant of Tasks RCU enabled.
[ 0.072004] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.072005] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.076627] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.079828] Console: colour VGA+ 80x25
[ 0.090015] printk: console [tty0] enabled
[ 0.090086] ACPI: Core revision 20201113
[ 0.090331] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.090409] APIC: Switch to symmetric I/O mode setup
[ 0.090532] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.091030] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.110409] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x21138ae8c31, max_idle_ns: 440795204567 ns
[ 0.110477] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.34 BogoMIPS (lpj=9178684)
[ 0.110541] pid_max: default: 32768 minimum: 301
[ 0.110622] LSM: Security Framework initializing
[ 0.110684] Yama: becoming mindful.
[ 0.110762] AppArmor: AppArmor initialized
[ 0.110872] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.110954] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.111323] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.111387] process: using mwait in idle threads
[ 0.111442] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.111494] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.111550] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.111612] Spectre V2 : Mitigation: Full generic retpoline
[ 0.111664] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.111725] Speculative Store Bypass: Vulnerable
[ 0.111780] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.112041] Freeing SMP alternatives memory: 40K
[ 0.118568] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1024
[ 0.118639] smpboot: CPU0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.118851] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.118922] core: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.118977] ... version: 3
[ 0.119029] ... bit width: 48
[ 0.119081] ... generic registers: 4
[ 0.119133] ... value mask: 0000ffffffffffff
[ 0.119187] ... max period: 00007fffffffffff
[ 0.119240] ... fixed-purpose events: 3
[ 0.119292] ... event mask: 000000070000000f
[ 0.119498] rcu: Hierarchical SRCU implementation.
[ 0.120479] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.120638] smp: Bringing up secondary CPUs ...
[ 0.120818] x86: Booting SMP configuration:
[ 0.120872] .... node #0, CPUs: #1
[ 0.122587] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.122752] #2 #3
[ 0.126543] smp: Brought up 1 node, 4 CPUs
[ 0.126607] smpboot: Max logical packages: 2
[ 0.126660] smpboot: Total of 4 processors activated (18357.36 BogoMIPS)
[ 0.130162] devtmpfs: initialized
[ 0.130162] x86/mm: Memory block size: 128MB
[ 0.131101] PM: Registering ACPI NVS region [mem 0xaa1ee000-0xaa976fff] (7901184 bytes)
[ 0.131101] PM: Registering ACPI NVS region [mem 0xaa99a000-0xaa99efff] (20480 bytes)
[ 0.131101] PM: Registering ACPI NVS region [mem 0xaf6bf000-0xaf7befff] (1048576 bytes)
[ 0.131101] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.131101] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.131101] pinctrl core: initialized pinctrl subsystem
[ 0.131241] PM: RTC time: 16:22:38, date: 2021-10-16
[ 0.131439] NET: Registered protocol family 16
[ 0.131696] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.131856] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.132020] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.132098] audit: initializing netlink subsys (disabled)
[ 0.132176] audit: type=2000 audit(1634401358.040:1): state=initialized audit_enabled=0 res=1
[ 0.132176] thermal_sys: Registered thermal governor 'fair_share'
[ 0.132176] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.132176] thermal_sys: Registered thermal governor 'step_wise'
[ 0.132176] thermal_sys: Registered thermal governor 'user_space'
[ 0.132176] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.132176] EISA bus registered
[ 0.132176] cpuidle: using governor ladder
[ 0.132176] cpuidle: using governor menu
[ 0.132176] Simple Boot Flag at 0x44 set to 0x1
[ 0.132176] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.132176] ACPI: bus type PCI registered
[ 0.132176] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.132176] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.132176] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.132176] PCI: Using configuration type 1 for base access
[ 0.132176] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.132176] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.136057] Kprobes globally optimized
[ 0.136114] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.136114] ACPI: Added _OSI(Module Device)
[ 0.136114] ACPI: Added _OSI(Processor Device)
[ 0.136114] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.136114] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.136114] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.136114] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.136114] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.154739] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.155932] ACPI: EC: EC started
[ 0.155984] ACPI: EC: interrupt blocked
[ 0.157316] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.157369] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.158337] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.158748] ACPI Error: Needed type [Reference], found [Integer] (____ptrval____) (20201113/exresop-66)
[ 0.158816] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20201113/dswexec-431)
[ 0.158932] No Local Variables are initialized for Method [_PDC]
[ 0.159037] Initialized Arguments for Method [_PDC]: (1 arguments defined for method invocation)
[ 0.159098] Arg0: (____ptrval____) <Obj> Buffer(12) 01 00 00 00 01 00 00 00
[ 0.159219] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20201113/psparse-529)
[ 0.159745] ACPI: Dynamic OEM Table Load:
[ 0.159806] ACPI: SSDT 0xFFFF89DF808B2800 000303 (v01 PmRef ApIst 00003000 INTL 20120111)
[ 0.161058] ACPI: Dynamic OEM Table Load:
[ 0.161117] ACPI: SSDT 0xFFFF89DF80C23600 000119 (v01 PmRef ApCst 00003000 INTL 20120111)
[ 0.163205] ACPI: Interpreter enabled
[ 0.163294] ACPI: (supports S0 S3 S4 S5)
[ 0.163347] ACPI: Using IOAPIC for interrupt routing
[ 0.163439] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.163816] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[ 0.163893] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.168633] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[ 0.173447] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.173510] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.173801] acpi PNP0A08:00: _OSC failed (AE_TYPE); disabling ASPM
[ 0.174722] PCI host bridge to bus 0000:00
[ 0.174777] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.174832] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.174887] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.174942] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.175004] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window]
[ 0.176241] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.176415] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.176511] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.176713] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.176787] pci 0000:00:14.0: reg 0x10: [mem 0xc3100000-0xc310ffff 64bit]
[ 0.176916] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.177096] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.177171] pci 0000:00:16.0: reg 0x10: [mem 0xc3114000-0xc311400f 64bit]
[ 0.177304] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.177475] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.178123] pci 0000:00:1a.0: reg 0x10: [mem 0xc3119000-0xc31193ff]
[ 0.179840] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.180029] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.180101] pci 0000:00:1b.0: reg 0x10: [mem 0xc3110000-0xc3113fff 64bit]
[ 0.180238] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.180421] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.180570] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.180757] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.180905] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.181094] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.181243] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.181437] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.182079] pci 0000:00:1d.0: reg 0x10: [mem 0xc3118000-0xc31183ff]
[ 0.183840] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.184027] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.184303] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.184371] pci 0000:00:1f.2: reg 0x10: [io 0x4048-0x404f]
[ 0.184432] pci 0000:00:1f.2: reg 0x14: [io 0x4054-0x4057]
[ 0.184493] pci 0000:00:1f.2: reg 0x18: [io 0x4040-0x4047]
[ 0.184553] pci 0000:00:1f.2: reg 0x1c: [io 0x4050-0x4053]
[ 0.184614] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
[ 0.184675] pci 0000:00:1f.2: reg 0x24: [mem 0xc3117000-0xc31177ff]
[ 0.184772] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.184942] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.185013] pci 0000:00:1f.3: reg 0x10: [mem 0xc3115000-0xc31150ff 64bit]
[ 0.185088] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
[ 0.185324] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[ 0.185394] pci 0000:01:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.185464] pci 0000:01:00.0: reg 0x18: [mem 0xc2000000-0xc201ffff 64bit]
[ 0.185525] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.185590] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.185651] pci 0000:01:00.0: enabling Extended Tags
[ 0.185746] pci 0000:01:00.0: supports D1 D2
[ 0.185889] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300
[ 0.185957] pci 0000:01:00.1: reg 0x10: [mem 0xc2020000-0xc2023fff 64bit]
[ 0.186045] pci 0000:01:00.1: enabling Extended Tags
[ 0.186137] pci 0000:01:00.1: supports D1 D2
[ 0.186261] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.186316] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.186371] pci 0000:00:01.0: bridge window [mem 0xc2000000-0xc2ffffff]
[ 0.186428] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.186534] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.186699] pci 0000:08:00.0: [168c:0032] type 00 class 0x028000
[ 0.186797] pci 0000:08:00.0: reg 0x10: [mem 0xc3000000-0xc307ffff 64bit]
[ 0.186934] pci 0000:08:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.187128] pci 0000:08:00.0: supports D1 D2
[ 0.187182] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187418] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.187476] pci 0000:00:1c.1: bridge window [mem 0xc3000000-0xc30fffff]
[ 0.187624] pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
[ 0.187704] pci 0000:09:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.187790] pci 0000:09:00.0: reg 0x18: [mem 0xc0004000-0xc0004fff 64bit pref]
[ 0.187871] pci 0000:09:00.0: reg 0x20: [mem 0xc0000000-0xc0003fff 64bit pref]
[ 0.188057] pci 0000:09:00.0: supports D1 D2
[ 0.188111] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188313] pci 0000:00:1c.2: PCI bridge to [bus 09-0e]
[ 0.188371] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.188427] pci 0000:00:1c.2: bridge window [mem 0xc1000000-0xc1ffffff]
[ 0.188488] pci 0000:00:1c.2: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[ 0.189499] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.189659] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.189811] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.189959] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.190108] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.190265] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.190414] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.190567] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.191172] ACPI: EC: interrupt unblocked
[ 0.191226] ACPI: EC: event unblocked
[ 0.191282] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.191335] ACPI: EC: GPE=0x1b
[ 0.191387] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot ECDT EC initialization complete
[ 0.191443] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[ 0.191587] iommu: Default domain type: Translated
[ 0.191587] SCSI subsystem initialized
[ 0.194492] libata version 3.00 loaded.
[ 0.194509] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.194541] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.194603] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.194657] vgaarb: loaded
[ 0.194731] ACPI: bus type USB registered
[ 0.194801] usbcore: registered new interface driver usbfs
[ 0.194862] usbcore: registered new interface driver hub
[ 0.194923] usbcore: registered new device driver usb
[ 0.195002] pps_core: LinuxPPS API ver. 1 registered
[ 0.195055] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.195120] PTP clock support registered
[ 0.195189] EDAC MC: Ver: 3.0.0
[ 0.195189] NetLabel: Initializing
[ 0.195189] NetLabel: domain hash size = 128
[ 0.195189] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.195189] NetLabel: unlabeled traffic allowed by default
[ 0.195189] PCI: Using ACPI for IRQ routing
[ 0.199700] PCI: pci_cache_line_size set to 64 bytes
[ 0.199766] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.199769] e820: reserve RAM buffer [mem 0xaa1ee000-0xabffffff]
[ 0.199770] e820: reserve RAM buffer [mem 0xaa99a000-0xabffffff]
[ 0.199772] e820: reserve RAM buffer [mem 0xaefbf000-0xafffffff]
[ 0.199774] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff]
[ 0.199775] e820: reserve RAM buffer [mem 0x1cf000000-0x1cfffffff]
[ 0.203612] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.203680] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.206504] clocksource: Switched to clocksource tsc-early
[ 0.218350] VFS: Disk quotas dquot_6.6.0
[ 0.218427] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.218618] AppArmor: AppArmor Filesystem Enabled
[ 0.218706] pnp: PnP ACPI init
[ 0.218978] system 00:00: [io 0x025c-0x025d] has been reserved
[ 0.219037] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.219091] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.219147] system 00:00: [io 0xffff] has been reserved
[ 0.219201] system 00:00: [io 0xffff] has been reserved
[ 0.219255] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.219310] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.219365] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.219420] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.219480] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.219509] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.219581] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.219641] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.219676] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.219711] pnp 00:04: Plug and Play ACPI device, IDs TOS0310 TOS0220 TTP0100 PNP0f13 (active)
[ 0.220007] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.220063] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.220119] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.220175] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.220230] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.220288] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.220343] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.220399] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.220455] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.220510] system 00:05: [mem 0xc3200000-0xc3200fff] has been reserved
[ 0.220568] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.220929] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.220987] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.221046] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.221135] pnp: PnP ACPI: found 7 devices
[ 0.227411] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.227544] NET: Registered protocol family 2
[ 0.227714] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.229346] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.229471] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.229739] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.229914] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.230048] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.230163] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.230253] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.230384] NET: Registered protocol family 1
[ 0.230441] NET: Registered protocol family 44
[ 0.230521] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 0.230588] pci 0000:08:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.230679] pci 0000:01:00.0: BAR 6: assigned [mem 0xc2040000-0xc205ffff pref]
[ 0.230742] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.230797] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.230853] pci 0000:00:01.0: bridge window [mem 0xc2000000-0xc2ffffff]
[ 0.230909] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.230972] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.231037] pci 0000:08:00.0: BAR 6: assigned [mem 0xc3080000-0xc308ffff pref]
[ 0.231099] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.231156] pci 0000:00:1c.1: bridge window [mem 0xc3000000-0xc30fffff]
[ 0.231218] pci 0000:00:1c.2: PCI bridge to [bus 09-0e]
[ 0.232444] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.232502] pci 0000:00:1c.2: bridge window [mem 0xc1000000-0xc1ffffff]
[ 0.232558] pci 0000:00:1c.2: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[ 0.232625] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.232679] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.232735] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.232790] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff window]
[ 0.232845] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.232899] pci_bus 0000:01: resource 1 [mem 0xc2000000-0xc2ffffff]
[ 0.232954] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.233016] pci_bus 0000:08: resource 1 [mem 0xc3000000-0xc30fffff]
[ 0.233070] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 0.233125] pci_bus 0000:09: resource 1 [mem 0xc1000000-0xc1ffffff]
[ 0.233178] pci_bus 0000:09: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
[ 0.254676] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x640 took 19389 usecs
[ 0.274673] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x640 took 19445 usecs
[ 0.274757] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.274847] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.274918] PCI: CLS 64 bytes, default 64
[ 0.275061] Trying to unpack rootfs image as initramfs...
[ 0.438946] Freeing initrd memory: 51808K
[ 0.439071] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.439129] software IO TLB: mapped [mem 0x00000000aafbf000-0x00000000aefbf000] (64MB)
[ 0.439457] check: Scanning for low memory corruption every 60 seconds
[ 0.440008] Initialise system trusted keyrings
[ 0.440071] Key type blacklist registered
[ 0.440159] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.441535] zbud: loaded
[ 0.441896] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.442093] fuse: init (API version 7.33)
[ 0.442302] integrity: Platform Keyring initialized
[ 0.454787] Key type asymmetric registered
[ 0.454841] Asymmetric key parser 'x509' registered
[ 0.454904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.455000] io scheduler mq-deadline registered
[ 0.455956] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.456071] intel_idle: MWAIT substates: 0x21120
[ 0.456074] intel_idle: v0.5.1 model 0x2A
[ 0.456321] intel_idle: Local APIC timer is reliable in all C-states
[ 0.456571] ACPI: AC Adapter [AC0] (on-line)
[ 0.456696] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0
[ 0.456783] ACPI: Power Button [PWRB]
[ 0.456873] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.456973] ACPI: Lid Switch [LID]
[ 0.457060] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.457147] ACPI: Power Button [PWRF]
[ 0.457232] ACPI: duty_cycle spans bit 4
[ 0.457330] ACPI: duty_cycle spans bit 4
[ 0.457417] ACPI: duty_cycle spans bit 4
[ 0.457502] ACPI: duty_cycle spans bit 4
[ 0.459267] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.459325] ACPI: Thermal Zone [THRM] (60 C)
[ 0.459648] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.462060] Linux agpgart interface v0.103
[ 0.475875] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 0.602656] loop: module loaded
[ 0.603231] libphy: Fixed MDIO Bus: probed
[ 0.603287] tun: Universal TUN/TAP device driver, 1.6
[ 0.603440] PPP generic driver version 2.4.2
[ 0.603712] VFIO - User Level meta-driver version: 0.3
[ 0.603959] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.604021] ehci-pci: EHCI PCI platform driver
[ 0.604252] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.604312] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.604385] ehci-pci 0000:00:1a.0: debug port 2
[ 0.608350] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc3119000
[ 0.622572] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.622730] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 0.622794] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.622855] usb usb1: Product: EHCI Host Controller
[ 0.622909] usb usb1: Manufacturer: Linux 5.11.0-37-generic ehci_hcd
[ 0.622964] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.623253] hub 1-0:1.0: USB hub found
[ 0.623317] hub 1-0:1.0: 2 ports detected
[ 0.623730] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.623789] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.623861] ehci-pci 0000:00:1d.0: debug port 2
[ 0.627853] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc3118000
[ 0.642575] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.642741] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 0.642805] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.642867] usb usb2: Product: EHCI Host Controller
[ 0.642920] usb usb2: Manufacturer: Linux 5.11.0-37-generic ehci_hcd
[ 0.642975] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.643251] hub 2-0:1.0: USB hub found
[ 0.643316] hub 2-0:1.0: 2 ports detected
[ 0.643583] ehci-platform: EHCI generic platform driver
[ 0.643655] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.643714] ohci-pci: OHCI PCI platform driver
[ 0.643778] ohci-platform: OHCI generic platform driver
[ 0.643839] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.643947] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.645834] i8042: Detected active multiplexing controller, rev 1.1
[ 0.648105] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.648163] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.648248] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.648323] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.648402] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.648695] mousedev: PS/2 mouse device common for all mice
[ 0.649180] rtc_cmos 00:01: RTC can wake from S4
[ 0.649497] rtc_cmos 00:01: registered as rtc0
[ 0.649603] rtc_cmos 00:01: setting system clock to 2021-10-16T16:22:38 UTC (1634401358)
[ 0.649681] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.649750] i2c /dev entries driver
[ 0.649850] device-mapper: uevent: version 1.0.3
[ 0.649961] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 0.650046] platform eisa.0: Probing EISA bus 0
[ 0.650100] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.650156] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.650211] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.650265] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.650319] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.650374] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.650429] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.650492] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.650546] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.650601] platform eisa.0: EISA: Detected 0 cards
[ 0.650658] intel_pstate: Intel P-state driver initializing
[ 0.650961] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.651290] drop_monitor: Initializing network drop monitor service
[ 0.651865] NET: Registered protocol family 10
[ 0.662418] Segment Routing with IPv6
[ 0.662514] NET: Registered protocol family 17
[ 0.662672] Key type dns_resolver registered
[ 0.663232] IPI shorthand broadcast: enabled
[ 0.663297] sched_clock: Marking stable (649525091, 13631948)->(671934663, -8777624)
[ 0.663480] registered taskstats version 1
[ 0.663544] Loading compiled-in X.509 certificates
[ 0.664814] Loaded X.509 cert 'Build time autogenerated kernel key: 1eb41faa13c76e3515c5d31902a2dea6fce62d74'
[ 0.665089] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.665830] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 0.666841] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 0.666905] blacklist: Loading compiled-in revocation X.509 certificates
[ 0.666981] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 0.667338] zswap: loaded using pool lzo/zbud
[ 0.667847] Key type ._fscrypt registered
[ 0.667904] Key type .fscrypt registered
[ 0.667957] Key type fscrypt-provisioning registered
[ 0.671588] Key type encrypted registered
[ 0.671666] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.671727] ima: No TPM chip found, activating TPM-bypass!
[ 0.671785] ima: Allocated hash algorithm: sha1
[ 0.671847] ima: No architecture policies found
[ 0.671909] evm: Initialising EVM extended attributes:
[ 0.671962] evm: security.selinux
[ 0.672014] evm: security.SMACK64
[ 0.672066] evm: security.SMACK64EXEC
[ 0.672118] evm: security.SMACK64TRANSMUTE
[ 0.672170] evm: security.SMACK64MMAP
[ 0.672222] evm: security.apparmor
[ 0.672274] evm: security.ima
[ 0.672325] evm: security.capability
[ 0.672377] evm: HMAC attrs: 0x1
[ 0.672815] PM: Magic number: 9:746:388
[ 0.672885] thermal cooling_device3: hash matches
[ 0.673095] RAS: Correctable Errors collector initialized.
[ 0.675748] Freeing unused decrypted memory: 2036K
[ 0.676210] Freeing unused kernel image (initmem) memory: 2688K
[ 0.706582] Write protecting the kernel read-only data: 22528k
[ 0.707267] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 0.707542] Freeing unused kernel image (rodata/data gap) memory: 684K
[ 0.773911] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.773969] x86/mm: Checking user space page tables
[ 0.837769] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.837830] Run /init as init process
[ 0.837883] with arguments:
[ 0.837885] /init
[ 0.837886] recovery
[ 0.837887] dis_ucode_ldr
[ 0.837889] with environment:
[ 0.837890] HOME=/
[ 0.837891] TERM=linux
[ 0.837892] BOOT_IMAGE=/boot/vmlinuz-5.11.0-37-generic
[ 0.997367] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 0.997505] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 1.001653] acpi device:37: registered as cooling_device4
[ 1.001778] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input8
[ 1.014498] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.024514] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[ 1.024663] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20201113/utaddress-204)
[ 1.024749] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.024817] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20201113/utaddress-204)
[ 1.024900] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20201113/utaddress-204)
[ 1.024981] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.025050] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20201113/utaddress-204)
[ 1.025140] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20201113/utaddress-204)
[ 1.025220] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.025286] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20201113/utaddress-204)
[ 1.025370] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPXX) (20201113/utaddress-204)
[ 1.025458] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.025523] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.025967] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.026556] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.027704] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ 1.028685] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 1.028753] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.028818] usb usb3: Product: xHCI Host Controller
[ 1.028875] usb usb3: Manufacturer: Linux 5.11.0-37-generic xhci-hcd
[ 1.028931] usb usb3: SerialNumber: 0000:00:14.0
[ 1.029180] hub 3-0:1.0: USB hub found
[ 1.029247] hub 3-0:1.0: 4 ports detected
[ 1.029457] r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.032071] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.032138] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.032205] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.032323] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[ 1.032389] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.032453] usb usb4: Product: xHCI Host Controller
[ 1.032510] usb usb4: Manufacturer: Linux 5.11.0-37-generic xhci-hcd
[ 1.032566] usb usb4: SerialNumber: 0000:00:14.0
[ 1.032884] hub 4-0:1.0: USB hub found
[ 1.032959] hub 4-0:1.0: 4 ports detected
[ 1.034499] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.050552] libphy: r8169: probed
[ 1.054788] r8169 0000:09:00.0 eth0: RTL8168evl/8111evl, 4c:72:b9:22:28:c3, XID 2c9, IRQ 29
[ 1.054860] r8169 0000:09:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 1.059843] ahci 0000:00:1f.2: version 3.0
[ 1.060146] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.062468] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.062568] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[ 1.063816] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 1.064420] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 1.070518] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1d impl SATA mode
[ 1.070597] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 1.082411] r8169 0000:09:00.0 enp9s0: renamed from eth0
[ 1.107280] scsi host0: ahci
[ 1.107576] scsi host1: ahci
[ 1.107848] scsi host2: ahci
[ 1.108088] scsi host3: ahci
[ 1.108325] scsi host4: ahci
[ 1.108583] scsi host5: ahci
[ 1.108725] ata1: SATA max UDMA/133 abar m2048@0xc3117000 port 0xc3117100 irq 30
[ 1.108796] ata2: DUMMY
[ 1.108853] ata3: SATA max UDMA/133 abar m2048@0xc3117000 port 0xc3117200 irq 30
[ 1.108919] ata4: SATA max UDMA/133 abar m2048@0xc3117000 port 0xc3117280 irq 30
[ 1.108980] ata5: SATA max UDMA/133 abar m2048@0xc3117000 port 0xc3117300 irq 30
[ 1.109040] ata6: DUMMY
[ 1.171129] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.171199] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.171569] hub 1-1:1.0: USB hub found
[ 1.171722] hub 1-1:1.0: 6 ports detected
[ 1.179265] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.179332] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.179710] hub 2-1:1.0: USB hub found
[ 1.179924] hub 2-1:1.0: 6 ports detected
[ 1.310581] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[ 1.370179] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.372080] ata1.00: ATA-8: Hitachi HTS547564A9E384, JEDOA60B, max UDMA/133
[ 1.372181] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 1.374188] ata1.00: configured for UDMA/133
[ 1.374823] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54756 A60B PQ: 0 ANSI: 5
[ 1.375523] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.375560] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.375704] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.375855] sd 0:0:0:0: [sda] Write Protect is off
[ 1.375941] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.375982] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.402583] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 1.407061] sda: sda1 sda2 < sda5 sda6 >
[ 1.423040] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.461003] usb 3-3: New USB device found, idVendor=0930, idProduct=0219, bcdDevice= 0.02
[ 1.461125] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.461212] usb 3-3: Product: Bluetooth USB Host Controller
[ 1.461293] usb 3-3: Manufacturer: Atheros Communications
[ 1.461375] usb 3-3: SerialNumber: Alaska Day 2006
[ 1.466524] tsc: Refined TSC clocksource calibration: 2294.786 MHz
[ 1.466629] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f7e44a7, max_idle_ns: 440795281465 ns
[ 1.466822] clocksource: Switched to clocksource tsc
[ 1.523997] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0138, bcdDevice=38.82
[ 1.524115] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.524213] usb 1-1.1: Product: USB2.0-CRW
[ 1.524289] usb 1-1.1: Manufacturer: Generic
[ 1.524365] usb 1-1.1: SerialNumber: 20090516388200000
[ 1.546658] usbcore: registered new interface driver usb-storage
[ 1.551788] usbcore: registered new interface driver uas
[ 1.556374] ums-realtek 1-1.1:1.0: USB Mass Storage device detected
[ 1.560591] scsi host6: usb-storage 1-1.1:1.0
[ 1.560945] usbcore: registered new interface driver ums-realtek
[ 1.610578] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 1.689914] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.693999] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208AB, TO03, max UDMA/100
[ 1.696801] ata3.00: configured for UDMA/100
[ 1.703123] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208AB TO03 PQ: 0 ANSI: 5
[ 1.728996] random: fast init done
[ 1.757678] psmouse serio2: synaptics: queried max coordinates: x [..5634], y [..4598]
[ 1.771314] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.771431] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.813452] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1680, fw id: 706145
[ 1.827255] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b326, bcdDevice=35.54
[ 1.827375] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.827471] usb 1-1.3: Product: TOSHIBA Web Camera - HD
[ 1.827550] usb 1-1.3: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.828866] usb 1-1.3: SerialNumber: 0x0001
[ 1.846653] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.847028] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.849146] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[ 2.162343] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.478298] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.589725] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 2.590221] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2.636359] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.923345] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 5.844543] random: crng init done
[ 6.002685] systemd[1]: Inserted module 'autofs4'
[ 6.287322] systemd[1]: systemd 245.4-4ubuntu3.13 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 6.306785] systemd[1]: Detected architecture x86-64.
[ 6.374155] systemd[1]: Set hostname to <k22-portable>.
[ 9.650884] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 9.651955] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.652467] systemd[1]: Reached target Slices.
[ 9.653175] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.653674] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 9.654654] systemd[1]: Listening on Journal Audit Socket.
[ 9.655307] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.655965] systemd[1]: Listening on Journal Socket.
[ 9.656608] systemd[1]: Listening on udev Control Socket.
[ 9.657146] systemd[1]: Listening on udev Kernel Socket.
[ 9.660162] systemd[1]: Mounting Huge Pages File System...
[ 9.663526] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.666213] systemd[1]: Mounting Kernel Debug File System...
[ 9.668703] systemd[1]: Mounting Kernel Trace File System...
[ 9.672608] systemd[1]: Starting Journal Service...
[ 9.674070] systemd[1]: Starting Set the console keyboard layout...
[ 9.675951] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 9.677760] systemd[1]: Starting Set console scheme...
[ 9.782708] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 9.782909] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 9.854618] systemd[1]: Starting Load Kernel Modules...
[ 9.856302] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 9.857895] systemd[1]: Starting udev Coldplug all Devices...
[ 9.860785] systemd[1]: Mounted Huge Pages File System.
[ 9.861271] systemd[1]: Mounted POSIX Message Queue File System.
[ 9.861694] systemd[1]: Mounted Kernel Debug File System.
[ 9.862098] systemd[1]: Mounted Kernel Trace File System.
[ 9.863148] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 9.864271] systemd[1]: Finished Set console scheme.
[ 9.996601] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ 10.000849] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 10.003801] systemd[1]: Activating swap /swapfile...
[ 10.298583] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
[ 10.310221] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 10.310591] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 10.313352] systemd[1]: Starting Load/Save Random Seed...
[ 10.315926] systemd[1]: Starting Create System Users...
[ 10.316311] systemd[1]: Activated swap /swapfile.
[ 10.316909] systemd[1]: Started Journal Service.
[ 10.359994] lp: driver loaded but no devices found
[ 10.398521] ppdev: user-space parallel port driver
[ 10.401855] systemd-journald[276]: Received client request to flush runtime journal.
[ 13.860376] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
[ 13.949786] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.24
[ 14.018010] pci_bus 0000:07: Allocating resources
[ 14.018018] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
[ 14.018025] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
[ 14.018031] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000
[ 14.018044] pci_bus 0000:08: Allocating resources
[ 14.018058] pcieport 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 14.018062] pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
[ 14.018074] pci_bus 0000:09: Allocating resources
[ 14.018090] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xc3300000-0xc34fffff]
[ 14.018099] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xc3500000-0xc36fffff 64bit pref]
[ 14.018107] pcieport 0000:00:1c.1: BAR 15: assigned [mem 0xc3700000-0xc38fffff 64bit pref]
[ 14.018114] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 14.018119] pcieport 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 14.018247] pci_bus 0000:01: Allocating resources
[ 14.019496] pci_bus 0000:07: Allocating resources
[ 14.019506] pci_bus 0000:08: Allocating resources
[ 14.019526] pci_bus 0000:09: Allocating resources
[ 14.019649] pci_bus 0000:01: Allocating resources
[ 14.052656] toshiba_acpi: WMI event detected, hotkeys will not be monitored
[ 14.118992] toshiba_acpi: Supported laptop features: touchpad usb-sleep-charge special-function-keys cooling-method
[ 14.372365] at24 0-0050: supply vcc not found, using dummy regulator
[ 14.372946] at24 0-0050: 256 byte spd EEPROM, read-only
[ 14.684456] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[ 14.684462] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 14.684465] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 14.824948] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 14.825603] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 14.980158] cryptd: max_cpu_qlen set to 1000
[ 15.602912] ath: phy0: ASPM enabled: 0x43
[ 15.602933] ath: EEPROM regdomain: 0x65
[ 15.602938] ath: EEPROM indicates we should expect a direct regpair map
[ 15.602945] ath: Country alpha2 being used: 00
[ 15.602950] ath: Regpair used: 0x65
[ 15.605182] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.606354] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffa0b800c80000, irq=17
[ 15.651541] ath9k 0000:08:00.0 wlp8s0: renamed from wlan0
[ 16.122665] [drm] VGACON disable radeon kernel modesetting.
[ 16.122672] [drm:radeon_module_init [radeon]] *ERROR* No UMS support in radeon module!
[ 16.515672] intel_rapl_common: Found RAPL domain package
[ 16.515687] intel_rapl_common: Found RAPL domain core
[ 17.253928] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 17.426888] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 17.426908] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.426916] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 17.426923] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 17.426928] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 17.426933] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 17.426938] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 17.437605] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 17.437882] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 20.671177] Bluetooth: Core ver 2.22
[ 20.671221] NET: Registered protocol family 31
[ 20.671223] Bluetooth: HCI device and connection manager initialized
[ 20.671228] Bluetooth: HCI socket layer initialized
[ 20.671231] Bluetooth: L2CAP socket layer initialized
[ 20.671237] Bluetooth: SCO socket layer initialized
[ 21.031108] usbcore: registered new interface driver btusb
[ 21.070625] usbcore: registered new interface driver ath3k
[ 21.282508] mc: Linux media interface: v0.10
[ 21.376453] videodev: Linux video capture interface: v2.00
[ 21.821313] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b326)
[ 21.842233] input: TOSHIBA Web Camera - HD: TOSHIB as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input16
[ 21.842597] usbcore: registered new interface driver uvcvideo
[ 21.842607] USB Video Class driver (1.1.1)
[ 22.946821] audit: type=1400 audit(1634401380.793:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=735 comm="apparmor_parser"
[ 22.961015] audit: type=1400 audit(1634401380.805:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=732 comm="apparmor_parser"
[ 22.977334] audit: type=1400 audit(1634401380.821:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=731 comm="apparmor_parser"
[ 22.977346] audit: type=1400 audit(1634401380.821:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=731 comm="apparmor_parser"
[ 22.993675] audit: type=1400 audit(1634401380.837:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=729 comm="apparmor_parser"
[ 22.993687] audit: type=1400 audit(1634401380.837:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=729 comm="apparmor_parser"
[ 22.993692] audit: type=1400 audit(1634401380.837:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=729 comm="apparmor_parser"
[ 23.033235] audit: type=1400 audit(1634401380.877:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=736 comm="apparmor_parser"
[ 23.077545] audit: type=1400 audit(1634401380.921:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=737 comm="apparmor_parser"
[ 23.077573] audit: type=1400 audit(1634401380.921:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=737 comm="apparmor_parser"
[ 23.474780] pci_bus 0000:07: Allocating resources
[ 23.474792] pci_bus 0000:08: Allocating resources
[ 23.474808] pci_bus 0000:09: Allocating resources
[ 23.474894] pci_bus 0000:01: Allocating resources
[ 23.475640] pci_bus 0000:07: Allocating resources
[ 23.475648] pci_bus 0000:08: Allocating resources
[ 23.475662] pci_bus 0000:09: Allocating resources
[ 23.475738] pci_bus 0000:01: Allocating resources
[ 24.823533] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.823541] Bluetooth: BNEP filters: protocol multicast
[ 24.823549] Bluetooth: BNEP socket layer initialized
[ 24.850545] NET: Registered protocol family 38
[ 31.366693] loop0: detected capacity change from 0 to 379584
[ 31.391953] loop1: detected capacity change from 0 to 104360
[ 31.414885] loop2: detected capacity change from 0 to 203424
[ 31.426958] loop3: detected capacity change from 0 to 203656
[ 31.467087] loop4: detected capacity change from 0 to 133320
[ 31.502797] loop5: detected capacity change from 0 to 133552
[ 31.526856] loop6: detected capacity change from 0 to 126632
[ 31.527163] loop7: detected capacity change from 0 to 448512
[ 31.599514] loop8: detected capacity change from 0 to 8
[ 31.670897] loop9: detected capacity change from 0 to 66168
[ 31.722968] loop10: detected capacity change from 0 to 280
[ 31.774843] loop11: detected capacity change from 0 to 379568
[ 31.842905] loop12: detected capacity change from 0 to 66368
[ 31.906862] loop13: detected capacity change from 0 to 126504
[ 31.980193] loop14: detected capacity change from 0 to 113536
[ 36.887350] kauditd_printk_skb: 19 callbacks suppressed
[ 36.887356] audit: type=1400 audit(1634401394.733:31): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/13170/usr/lib/snapd/snap-confine" pid=1079 comm="apparmor_parser"
[ 36.887368] audit: type=1400 audit(1634401394.733:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/13170/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1079 comm="apparmor_parser"
[ 36.893396] audit: type=1400 audit(1634401394.737:33): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/13270/usr/lib/snapd/snap-confine" pid=1080 comm="apparmor_parser"
[ 36.893424] audit: type=1400 audit(1634401394.737:34): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/13270/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1080 comm="apparmor_parser"
[ 36.909303] audit: type=1400 audit(1634401394.753:35): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/11798/usr/lib/snapd/snap-confine" pid=1078 comm="apparmor_parser"
[ 36.909315] audit: type=1400 audit(1634401394.753:36): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/11798/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1078 comm="apparmor_parser"
[ 37.013977] audit: type=1400 audit(1634401394.857:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.audacity" pid=1081 comm="apparmor_parser"
[ 37.442712] audit: type=1400 audit(1634401395.289:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.core" pid=1094 comm="apparmor_parser"
[ 37.448177] pci_bus 0000:07: Allocating resources
[ 37.448194] pci_bus 0000:08: Allocating resources
[ 37.448216] pci_bus 0000:09: Allocating resources
[ 37.448341] pci_bus 0000:01: Allocating resources
[ 37.449464] pci_bus 0000:07: Allocating resources
[ 37.449478] pci_bus 0000:08: Allocating resources
[ 37.449497] pci_bus 0000:09: Allocating resources
[ 37.449615] pci_bus 0000:01: Allocating resources
[ 37.849520] audit: type=1400 audit(1634401395.693:39): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.snap-store" pid=1095 comm="apparmor_parser"
[ 38.080250] audit: type=1400 audit(1634401395.925:40): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.audacity.audacity" pid=1096 comm="apparmor_parser"
[ 45.886818] RTL8211E Gigabit Ethernet r8169-0-900:00: attached PHY driver (mii_bus:phy_addr=r8169-0-900:00, irq=MAC)
[ 46.149119] r8169 0000:09:00.0 enp9s0: Link is Down
[ 47.580686] kauditd_printk_skb: 5 callbacks suppressed
[ 47.580691] audit: type=1400 audit(1634401405.425:46): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1076 comm="cups-browsed" capability=23 capname="sys_nice"
[ 48.541854] wlp8s0: authenticate with 30:7e:cb:e3:68:9c
[ 48.556829] wlp8s0: send auth to 30:7e:cb:e3:68:9c (try 1/3)
[ 48.558800] wlp8s0: authenticated
[ 48.562511] wlp8s0: associate with 30:7e:cb:e3:68:9c (try 1/3)
[ 48.566946] wlp8s0: RX AssocResp from 30:7e:cb:e3:68:9c (capab=0x411 status=0 aid=5)
[ 48.567106] wlp8s0: associated
[ 49.628680] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
[ 50.930989] loop15: detected capacity change from 0 to 8
[ 80.631362] rfkill: input handler disabled
[ 90.132000] Bluetooth: RFCOMM TTY layer initialized
[ 90.132019] Bluetooth: RFCOMM socket layer initialized
[ 90.132039] Bluetooth: RFCOMM ver 1.11
[ 92.128650] rfkill: input handler enabled
[ 98.252329] rfkill: input handler disabled
[ 101.002087] audit: type=1400 audit(1634401459.254:47): apparmor="DENIED" operation="capable" profile="/snap/snapd/13270/usr/lib/snapd/snap-confine" pid=2447 comm="snap-confine" capability=4 capname="fsetid"
[ 109.627211] audit: type=1326 audit(1634401467.884:48): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=2447 comm="snap-store" exe="/snap/snap-store/547/usr/bin/snap-store" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7fdf53b88639 code=0x50000
[ 112.804745] audit: type=1107 audit(1634401471.060:49): pid=753 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.5" pid=2447 label="snap.snap-store.ubuntu-software" peer_pid=1048 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 112.805265] audit: type=1107 audit(1634401471.064:50): pid=753 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.5" pid=2447 label="snap.snap-store.ubuntu-software" peer_pid=1048 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 113.269006] audit: type=1107 audit(1634401471.528:51): pid=753 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.5" pid=2447 label="snap.snap-store.ubuntu-software" peer_pid=1048 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 113.269819] audit: type=1107 audit(1634401471.528:52): pid=753 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.5" pid=2447 label="snap.snap-store.ubuntu-software" peer_pid=1048 peer_label="unconfined"
exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?'
[ 116.059462] audit: type=1400 audit(1634401474.317:53): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/PackageKit/Vendor.conf" pid=2447 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0Hors ligne
#9 Le 16/10/2021, à 18:36
- xubu1957
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Bonjour,
On voit :
[ 16.122665] [drm] VGACON disable radeon kernel modesetting.
[ 16.122672] [drm:radeon_module_init [radeon]] *ERROR* No UMS support in radeon module!Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#10 Le 16/10/2021, à 18:37
- Nuliel
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Ah mais je suis bête, tu es passé par le mode recovery, donc tu as donc le paramètre noyau nomodeset, donc le pilote graphique radeon n'est pas utilisé. C'est normal.
Que donne
xrandr? (c'est pour voir si ton écran de pc est utilisé/reconnu)
Si tu débranches l'écran, est ce que cela te passe sur l'écran du pc?
Et sans passer par le mode recovery, tu as une image sur l'écran externe?
Dernière modification par Nuliel (Le 16/10/2021, à 18:38)
Hors ligne
#11 Le 16/10/2021, à 18:50
- k22bis
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Alors si je débranche mon écran, il ne passe rien au niveau de l'écran du portable.
Si je ne démarre pas en mode recovery, je visualise sur l'écran externe quelques hiéroglyphes, puis à un moment Ubuntu 20.04 puis je devine la dernière ligne de pixel en couleur mauve et puis rien d'autre!
voici le retour
xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 400, current 640 x 480, maximum 720 x 480
default connected primary 640x480+0+0 0mm x 0mm
640x480 0.00*
720x400 0.00
720x480 0.00 Hors ligne
#12 Le 16/10/2021, à 18:56
- Nuliel
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Oh, pour moi il devrait y avoir deux écrans dans le dernier retour.
Est ce que tu peux essayer de démarrer avec l'option modprobe.blacklist=radeon? Pour cela, dans le menu grub, au lieu de choisir le mode recovery, tu appuies sur e en étant positionné sur l'entrée choisie par défaut. Là tu pourras ajouter modprobe.blacklist=radeon entre quiet et splash (le clavier est en qwerty, il faut un peu chercher), puis faire F10 pour démarrer. Tu pourras vérifier que le paramètre est bien passé avec
cat /proc/cmdlineet voir si ça marche correctement sur l'écran externe, le débrancher et voir si ça marche sur l'écran du pc portable.
Hors ligne
#13 Le 16/10/2021, à 20:16
- k22bis
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Alors, il y a du mieux. L'écran externe démarre directement et beaucoup plus rapidement en plus en 1152 x 864.
En revanche sur l’écran du portable c'est toujours écran noir après avoir redémarré sans écran externe.
J'ajoute que Verr Maj et Verr num, qui sont à priori mes seuls indicateurs de fonctionnement du système, ne répondent pas.
Ce qui me laisse penser que le système essaye de charger quelque chose comme l'affichage et que ça boucle sans solution interne (bon, ça ne veut pas dire grand chose mais je l'imagine comme ça!)
Hors ligne
#14 Le 16/10/2021, à 20:22
- Nuliel
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Le paramètre modprobe.blacklist=radeon que tu as passé n'est valable que pour la session, en d'autres termes il disparaît au redémarrage. Tu as essayé de démarrer avec modprobe.blacklist=radeon et débrancher l'écran externe pour voir s'il se passe qqch sur l'écran du pc portable?
Aussi as tu utilisé une lampe pour voir s'il y a un affichage sans rétroéclairage sur l'écran du pc portable? (en fait pour avoir une image, il faut l'image et qu'elle soit éclairée, sinon on voit rien)
Hors ligne
#15 Le 16/10/2021, à 20:28
- k22bis
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
J'ai redémarré avec modprobe.blacklist=radeon ce qui m'a repermit de démarrer directement sur l'écran externe en 1152 x 864.
Puis j'ai débranché l'écran externe, mais rien ne s'est passé sur l'écran du portable.
En éclairant avec lampe de mon téléphone dirigée prés de mon écran de portable, rien n’apparaît.
Hors ligne
#16 Le 16/10/2021, à 20:32
- Nuliel
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Ok. J'aurais tendance à penser que l'écran du pc portable est mort, mais ce qui me surprend, c'est que le pilote radeon ne donne pas d'affichage correct sur l'écran externe. Peut être que l'écran interne fait buguer le pilote. Il y a probablement moyen de passer un paramètre noyau pour empêcher l'utilisation de l'écran interne, je sais pas faire, mais ça doit pouvoir se trouver. Je peux regarder ça après en soirée.
Dernière modification par Nuliel (Le 16/10/2021, à 20:33)
Hors ligne
#17 Le 16/10/2021, à 20:38
- k22bis
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Merci pour toute l'aide. Bonne soirée.
Hors ligne
#18 Le 20/10/2021, à 18:57
- k22bis
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Bonsoir,
l'écran est HS, ça ne fait aucun doute.
D'où cette dernière question : où acheter un écran au prix le plus juste (à vrai dire, c'est plutôt mon budget qui est un peu juste!). Peut-être que des membres de ce forum ont ce qu'ils faut ?
Bonne soirée.
Hors ligne
#19 Le 20/10/2021, à 19:45
- xubu1957
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
[HS]
Bonjour,
@Nuliel
Pour cette discussion > Mon second écran ne marche pas, il s'éteint, des conseils pour les paramètres à rajouter ?
Merci d'avance. 
[/HS]
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#20 Le 20/10/2021, à 20:49
- Nuliel
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
@k22bis: en faisant quelques recherches, apparemment il faudrait compter environ 65€ pour un écran, après faut trouver exactement le bon modèle. Je serais pas aussi catégorique sur le fait que l'écran est HS.
Hors ligne
#21 Le 20/10/2021, à 21:57
- k22bis
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Bonsoir,
je vais tenter la méthode proposée par @xubu1957.
Effectivement, on ne sais jamais. Cependant, si le problème était lié à une histoire de drivers ou et d'installation, l'écran serait censé s’allumer dans le bios lorsque le disque dur est déconnecté non et qu'aucun système n'est trouvé?
(j'ai débranché le disque dur pour m'affranchir des problèmes d'OS).
@@Nuliel tu pencherais plutôt pour un problème de carte graphique? ou de Bios ?
J'ai vu que je pouvais flasher le bios, je cherche comment faire, pas évident. J'ai trouvé un lien, mais je ne sais ni quoi en penser ni quoi en faire !
https://d2.driverscollection.com/-45105 … 085206.zip
J'en ai trouvé un plus récent qui date de 2014 sur https://fr.dynabook.com/support/drivers/
A l'intérieur du zip, c'est un fichier exe, mais quoi en faire ? Je le mets sur une clé usb que j'ai rendu bootable et je boote dessus ?
Dernière modification par k22bis (Le 20/10/2021, à 22:26)
Hors ligne
#22 Le 20/10/2021, à 23:21
- Nuliel
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Pour tester si cela vient d'un driver, on teste généralement en live usb, avec le paramètre modprobe.blacklist=nouveau lorsqu'on a une carte nvidia récente.
Le BIOS doit toujours s'afficher, même si le disque dur est déconnecté.
Ce n'est pas un pb de BIOS, sinon cela ne démarrerait pas. Ne prends pas de risques inutiles, pas besoin de le reflasher. Et c'est pas forcément simple de reflasher, il faut soit un windows, soit un live usb avec un pseudo windows (j'ai oublié le nom)
De toute façon, c'est soit rétroéclairage mort/puce graphique dédiée défectueuse/écran mort.
Si en mettant une source de lumière sur l'écran, tu ne vois pas plus (c'est très léger l'image sans rétroéclairage), alors c'est pas un pb de rétroéclairage.
Je te laisse tester en live usb pour vérifier que c'est pas un problème lié à ton install.
Dernière modification par Nuliel (Le 20/10/2021, à 23:21)
Hors ligne
#23 Le 22/10/2021, à 00:26
- k22bis
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Bonsoir, alors j'ai essayé à partir de mon live usb. Pas mieux.
Alors j'ai démonté l'écran puis rebranché avec juste l'écran externe qui se comporte exactement comme avant.
Du coup, je vais prendre le risque entre puce graphique dédiée défectueuse et écran mort, je le saurais en remontant le nouvel écran.
Je vous tiens au courant du verdict d'ici une semaine le temps de recevoir le nouveau.
Hors ligne
#24 Le 07/04/2023, à 19:56
- k22bis
Re : [Résolu] Écran ou carte graphique HS sur Toshiba Satellite l850-15z
Je n'avais pas conclu cette histoire.
C'était la carte graphique sur la carte mère, du coup j'ai deux dalles fonctionnelles dont une neuve! => résolu!
Hors ligne