[Abandon] Gnome-shell et CPU à 100%

Gerinald · Le 19/05/2021, à 18:55

Bonjour,

Gnome 3.38.5
Kernel 5.11.0-17
Le reste dans ma signature

Dès le boot, j'utilise Ubuntu sans souci, je peut tout utiliser, aucun accrochage.

Par contre, après une heure ou deux, je commence à sentir un ralentissement, jusqu'à ce que ma souris ne sache plus bouger.

En faisant un top, je constate que Gnome-shell est à 100% du CPU.

Mise à jour OK, aucun programme en arrière plan.

Si vous avez une idée, je suis preneur

Dernière modification par Gerinald (Le 26/05/2021, à 09:46)

Gerinald · Le 20/05/2021, à 12:35

Bonjour,

Comme je ne reçois aucune réponse, je continue de gratter .... j'ai désactiver toutes les extensions, car je me doute que cela viens de là ... mais je ne vois aucune amélioration.

Je continue de chercher, mais si vous avez des pistes, n'hésitez pas ...

jeange · Le 20/05/2021, à 14:05

Bonjour,
Est-ce venu depuis l'install de 21.04 ? et dans des circonstances particulières ?

Gerinald · Le 20/05/2021, à 14:57

Bonjour jeange,

Merci de ta réponse

Oui, c'est depuis que j'ai fait une installe toutes propre de Ubuntu .... avant, j'avait juste upgradé de la 20 vers la 21, puis lundi, je me suis dis qu'il serai mieux de faire un install propre.

J'avais aucun souci avant ...

Donc install, puis ajout de l'extension Dash to Dock ... la seule est unique extension, et utilisation normal.

J'ai désactivé l'extension, au cas ou se serai elle qui mettrai du brol, mais cela continue encore.

Bat

Gerinald · Le 20/05/2021, à 21:19

Bonsoir,

Après avoir bien chipoté, je pense avoir trouvé le fautif : Dash to Dock

Je l’avais pourtant désactivé, mais rien n'y faisais ... je l'ai donc carrément désinstallé, j'ai eu droit à un plantage en règle de Gnome, j'ai dû relancer à l'arrache.

Retour sur le bureau, plus de dock, j'ai donc dû manipuler pour le remettre, et là, ça fait deux heures et pas de ralentissement.

Je ne comprend pas, car sous la 20, je n'avais aucun souci, par contre, sur la 21, c'est catastrophique.

Je vais continuer de surveiller, et mettrai en résolu une fois que je vois que c'est OK

jeange · Le 20/05/2021, à 21:36

Bonsoir,

Gerinald a écrit :

Retour sur le bureau, plus de dock, j'ai donc dû manipuler pour le remettre

sous 18.04 et 20.04 , j'ai ça

Est-ce différend sous 21.04 ?

Gerinald · Le 20/05/2021, à 21:44

Bonsoir,

Non, ce n'est pas différent ... sauf que si on ajoute Dash to Dock, on a accès à plus de paramètres, comme celui de diminuer le bandeau, et autre.

Il semble que sous la 21, cela pose quelques soucis de prise de mémoire CPU

jeange · Le 20/05/2021, à 21:47

Heuh
Qu'appelle-tu Dash to Dock ?

Gerinald · Le 20/05/2021, à 21:54

jeange a écrit :

Heuh
Qu'appelle-tu Dash to Dock ?

https://extensions.gnome.org/extension/ … h-to-dock/

Très chouette extensions, qui ne m'avais jamais posé de souci .. jusque maintenant

Il ne faut pas oublié d'arrêter l'extensions existante dans Gnome, qui est simpliste par rapport à dash

jeange · Le 20/05/2021, à 22:03

Finalement ce n'est qu'un gadget à emmerdes qui a la même fonction que Paramètres

Coeur Noir · Le 20/05/2021, à 22:52

Jeangé, le dock sous Ubuntu-à-la-sauce-gnome ( le bandeau avec les icônes que tu montres au #6 ) c'est Dash-to-Dock - mais fourni depuis les dépôts par Canonical ( il s'appelle alors Ubuntu Dock ).

À la base c'est exactement la même extension gnome-shell, elle est juste un peu castrée sous Ubuntu. Ça n'a donc rien à voir avec « paramètres ».

Gerinald, comment avais-tu installé Dash-to-Dock et surtout s'agissait-il bien d'une version compatible avec la version de gnome-shell dans Ubuntu 21.04 ?
La version de gnome-shell est visible dans « à propos du système » il me semble que c'est 3.38 sous 21.04 mais à vérifier.

Il faut donc que l'extension soit compatible avec 3.38 spécifiquement.

Affichais-tu la corbeille dans le dock ?

Dernière modification par Coeur Noir (Le 20/05/2021, à 22:54)

iznobe · Le 20/05/2021, à 23:28

Bonsoir , les journaux ne donne rien ?
apres un re demarrage :

sudo dmesg

cat /var/log/syslog | grep error

Gerinald · Le 21/05/2021, à 07:00

Bonjour tout le monde,

- jeange : comme dis, c'est un Dash to Dock plus complet que celui de Ubuntu, c'est pas que un gadget.

- Coeur Noir : merci de t’intéressé à ce souci
Dash-to-Dock est pris sur le site suivant : https://extensions.gnome.org/extension/ … h-to-dock/
Gnome Shell : 3.38 .. je fait bien attention à la numérotation.
Corbeille : je l'enlève, j'ai jamais eu de souci avec ça auparavant.

- iznobe :

Le dmesg :

[    0.000000] Linux version 5.11.0-17-generic (buildd@lcy01-amd64-002) (gcc (Ubuntu 10.3.0-1ubuntu1) 10.3.0, GNU ld (GNU Binutils for Ubuntu) 2.36.1) #18-Ubuntu SMP Thu May 6 20:10:11 UTC 2021 (Ubuntu 5.11.0-17.18-generic 5.11.12)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-17-generic root=UUID=98c59dc3-428e-4384-b3f9-a463b68cfd4a ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x000000005a42bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000005a42c000-0x000000005b8f6fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005b8f7000-0x000000005ba75fff] usable
[    0.000000] BIOS-e820: [mem 0x000000005ba76000-0x000000005be80fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000005be81000-0x000000005cc85fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005cc86000-0x000000005effffff] usable
[    0.000000] BIOS-e820: [mem 0x000000005f000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f33ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x563b4018-0x563c1457] usable ==> usable
[    0.000000] e820: update [mem 0x563b4018-0x563c1457] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009cfffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000000a20b000-0x000000000affffff] usable
[    0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000563b4017] usable
[    0.000000] reserve setup_data: [mem 0x00000000563b4018-0x00000000563c1457] usable
[    0.000000] reserve setup_data: [mem 0x00000000563c1458-0x000000005a42bfff] usable
[    0.000000] reserve setup_data: [mem 0x000000005a42c000-0x000000005b8f6fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000005b8f7000-0x000000005ba75fff] usable
[    0.000000] reserve setup_data: [mem 0x000000005ba76000-0x000000005be80fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000005be81000-0x000000005cc85fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000005cc86000-0x000000005effffff] usable
[    0.000000] reserve setup_data: [mem 0x000000005f000000-0x00000000dfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021f33ffff] usable
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi: ACPI 2.0=0x5bdfd000 ACPI=0x5bdfd000 SMBIOS=0x5cabc000 SMBIOS 3.0=0x5cabb000 MEMATTR=0x58e73698 ESRT=0x59298d18 MOKvar=0x5647b000 RNG=0x5cad5a98 
[    0.000000] efi: seeding entropy pool
[    0.000000] random: fast init done
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.2.1 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X370M-HDV R4.0, BIOS P3.70 11/14/2019
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3593.436 MHz processor
[    0.000586] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000588] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000594] last_pfn = 0x21f340 max_arch_pfn = 0x400000000
[    0.000599] MTRR default type: uncachable
[    0.000600] MTRR fixed ranges enabled:
[    0.000601]   00000-9FFFF write-back
[    0.000602]   A0000-BFFFF write-through
[    0.000603]   C0000-FFFFF write-protect
[    0.000604] MTRR variable ranges enabled:
[    0.000605]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000607]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000608]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000609]   3 disabled
[    0.000610]   4 disabled
[    0.000611]   5 disabled
[    0.000611]   6 disabled
[    0.000612]   7 disabled
[    0.000612] TOM2: 0000000220000000 aka 8704M
[    0.000997] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001258] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.001268] last_pfn = 0x5f000 max_arch_pfn = 0x400000000
[    0.004872] ACPI: Early table checksum verification disabled
[    0.004877] ACPI: RSDP 0x000000005BDFD000 000024 (v02 ALASKA)
[    0.004881] ACPI: XSDT 0x000000005BDFD098 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004886] ACPI: FACP 0x000000005BE03BE8 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.004891] ACPI: DSDT 0x000000005BDFD1E8 0069FF (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.004894] ACPI: FACS 0x000000005BE69E00 000040
[    0.004896] ACPI: APIC 0x000000005BE03D00 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.004899] ACPI: FPDT 0x000000005BE03E60 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004902] ACPI: FIDT 0x000000005BE03EA8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004905] ACPI: SSDT 0x000000005BE03F48 000060 (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.004907] ACPI: SSDT 0x000000005BE03FA8 005419 (v02 AMD    AmdTable 00000002 MSFT 04000000)
[    0.004910] ACPI: SSDT 0x000000005BE093C8 00310A (v01 AMD    AMD AOD  00000001 INTL 20120913)
[    0.004913] ACPI: MCFG 0x000000005BE0C4D8 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.004916] ACPI: AAFT 0x000000005BE0C518 0003B8 (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.004919] ACPI: HPET 0x000000005BE0C8D0 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.004921] ACPI: UEFI 0x000000005BE0C908 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.004924] ACPI: BGRT 0x000000005BE0C950 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004927] ACPI: SSDT 0x000000005BE0C988 000718 (v01 AMD    AMD CPU  00000001 AMD  00000001)
[    0.004930] ACPI: CRAT 0x000000005BE0D0A0 000810 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
[    0.004932] ACPI: CDIT 0x000000005BE0D8B0 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
[    0.004935] ACPI: SSDT 0x000000005BE0D8E0 001D34 (v01 AMD    AmdTable 00000001 INTL 20120913)
[    0.004938] ACPI: SSDT 0x000000005BE0F618 0000BF (v01 AMD    AMD PT   00001000 INTL 20120913)
[    0.004940] ACPI: WSMT 0x000000005BE0F6D8 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.004943] ACPI: Reserving FACP table memory at [mem 0x5be03be8-0x5be03cfb]
[    0.004944] ACPI: Reserving DSDT table memory at [mem 0x5bdfd1e8-0x5be03be6]
[    0.004945] ACPI: Reserving FACS table memory at [mem 0x5be69e00-0x5be69e3f]
[    0.004946] ACPI: Reserving APIC table memory at [mem 0x5be03d00-0x5be03e5d]
[    0.004947] ACPI: Reserving FPDT table memory at [mem 0x5be03e60-0x5be03ea3]
[    0.004948] ACPI: Reserving FIDT table memory at [mem 0x5be03ea8-0x5be03f43]
[    0.004948] ACPI: Reserving SSDT table memory at [mem 0x5be03f48-0x5be03fa7]
[    0.004949] ACPI: Reserving SSDT table memory at [mem 0x5be03fa8-0x5be093c0]
[    0.004950] ACPI: Reserving SSDT table memory at [mem 0x5be093c8-0x5be0c4d1]
[    0.004951] ACPI: Reserving MCFG table memory at [mem 0x5be0c4d8-0x5be0c513]
[    0.004952] ACPI: Reserving AAFT table memory at [mem 0x5be0c518-0x5be0c8cf]
[    0.004953] ACPI: Reserving HPET table memory at [mem 0x5be0c8d0-0x5be0c907]
[    0.004953] ACPI: Reserving UEFI table memory at [mem 0x5be0c908-0x5be0c949]
[    0.004954] ACPI: Reserving BGRT table memory at [mem 0x5be0c950-0x5be0c987]
[    0.004955] ACPI: Reserving SSDT table memory at [mem 0x5be0c988-0x5be0d09f]
[    0.004956] ACPI: Reserving CRAT table memory at [mem 0x5be0d0a0-0x5be0d8af]
[    0.004957] ACPI: Reserving CDIT table memory at [mem 0x5be0d8b0-0x5be0d8d8]
[    0.004957] ACPI: Reserving SSDT table memory at [mem 0x5be0d8e0-0x5be0f613]
[    0.004958] ACPI: Reserving SSDT table memory at [mem 0x5be0f618-0x5be0f6d6]
[    0.004959] ACPI: Reserving WSMT table memory at [mem 0x5be0f6d8-0x5be0f6ff]
[    0.004964] esrt: Reserving ESRT space from 0x0000000059298d18 to 0x0000000059298d50.
[    0.004975] e820: update [mem 0x59298000-0x59298fff] usable ==> reserved
[    0.004992] e820: update [mem 0x5647b000-0x56480fff] usable ==> reserved
[    0.005058] check: Scanning 1 areas for low memory corruption
[    0.005068] Using GB pages for direct mapping
[    0.005755] secureboot: Secure boot disabled
[    0.005757] RAMDISK: [mem 0x39293000-0x3cc54fff]
[    0.005773] ACPI: Local APIC address 0xfee00000
[    0.005840] No NUMA configuration found
[    0.005841] Faking a node at [mem 0x0000000000000000-0x000000021f33ffff]
[    0.005848] NODE_DATA(0) allocated [mem 0x21f316000-0x21f33ffff]
[    0.006093] Zone ranges:
[    0.006094]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006095]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.006097]   Normal   [mem 0x0000000100000000-0x000000021f33ffff]
[    0.006098]   Device   empty
[    0.006099] Movable zone start for each node
[    0.006102] Early memory node ranges
[    0.006102]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.006104]   node   0: [mem 0x0000000000100000-0x0000000009cfffff]
[    0.006105]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.006105]   node   0: [mem 0x000000000a20b000-0x000000000affffff]
[    0.006106]   node   0: [mem 0x000000000b020000-0x000000005a42bfff]
[    0.006107]   node   0: [mem 0x000000005b8f7000-0x000000005ba75fff]
[    0.006108]   node   0: [mem 0x000000005cc86000-0x000000005effffff]
[    0.006109]   node   0: [mem 0x0000000100000000-0x000000021f33ffff]
[    0.006110] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f33ffff]
[    0.006111] On node 0 totalpages: 1554649
[    0.006113]   DMA zone: 64 pages used for memmap
[    0.006114]   DMA zone: 30 pages reserved
[    0.006114]   DMA zone: 3999 pages, LIFO batch:0
[    0.006333]   DMA zone: 28769 pages in unavailable ranges
[    0.006334]   DMA32 zone: 5848 pages used for memmap
[    0.006335]   DMA32 zone: 374266 pages, LIFO batch:63
[    0.010305]   DMA32 zone: 14854 pages in unavailable ranges
[    0.010310]   Normal zone: 18381 pages used for memmap
[    0.010311]   Normal zone: 1176384 pages, LIFO batch:63
[    0.021299]   Normal zone: 3264 pages in unavailable ranges
[    0.021477] ACPI: PM-Timer IO Port: 0x808
[    0.021480] ACPI: Local APIC address 0xfee00000
[    0.021488] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.021504] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[    0.021511] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[    0.021513] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.021514] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.021516] ACPI: IRQ0 used by override.
[    0.021517] ACPI: IRQ9 used by override.
[    0.021519] Using ACPI (MADT) for SMP configuration information
[    0.021520] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.021535] e820: update [mem 0x56b6e000-0x56baefff] usable ==> reserved
[    0.021546] smpboot: Allowing 32 CPUs, 28 hotplug CPUs
[    0.021564] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.021566] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.021567] PM: hibernation: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
[    0.021568] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
[    0.021570] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.021571] PM: hibernation: Registered nosave memory: [mem 0x563b4000-0x563b4fff]
[    0.021573] PM: hibernation: Registered nosave memory: [mem 0x563c1000-0x563c1fff]
[    0.021574] PM: hibernation: Registered nosave memory: [mem 0x5647b000-0x56480fff]
[    0.021576] PM: hibernation: Registered nosave memory: [mem 0x56b6e000-0x56baefff]
[    0.021577] PM: hibernation: Registered nosave memory: [mem 0x59298000-0x59298fff]
[    0.021578] PM: hibernation: Registered nosave memory: [mem 0x5a42c000-0x5b8f6fff]
[    0.021580] PM: hibernation: Registered nosave memory: [mem 0x5ba76000-0x5be80fff]
[    0.021581] PM: hibernation: Registered nosave memory: [mem 0x5be81000-0x5cc85fff]
[    0.021582] PM: hibernation: Registered nosave memory: [mem 0x5f000000-0xdfffffff]
[    0.021583] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.021583] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.021584] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
[    0.021585] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[    0.021587] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.021588] Booting paravirtualized kernel on bare hardware
[    0.021591] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.021599] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[    0.023642] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
[    0.023654] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
[    0.023657] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.023666] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
[    0.023708] Built 1 zonelists, mobility grouping on.  Total pages: 1530326
[    0.023709] Policy zone: Normal
[    0.023711] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-17-generic root=UUID=98c59dc3-428e-4384-b3f9-a463b68cfd4a ro quiet splash vt.handoff=7
[    0.024892] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.025469] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.025562] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.050116] Memory: 5831752K/6218596K available (16393K kernel code, 3476K rwdata, 10148K rodata, 2688K init, 5976K bss, 386584K reserved, 0K cma-reserved)
[    0.050125] random: get_random_u64 called from kmem_cache_open+0x27/0x230 with crng_init=1
[    0.050293] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[    0.050312] ftrace: allocating 51206 entries in 201 pages
[    0.065036] ftrace: allocated 201 pages with 4 groups
[    0.065251] rcu: Hierarchical RCU implementation.
[    0.065252] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
[    0.065254] 	Rude variant of Tasks RCU enabled.
[    0.065254] 	Tracing variant of Tasks RCU enabled.
[    0.065255] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.065256] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[    0.067851] NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
[    0.068242] random: crng done (trusting CPU's manufacturer)
[    0.068285] vt handoff: transparent VT on vt#7
[    0.068290] Console: colour dummy device 80x25
[    0.068302] printk: console [tty0] enabled
[    0.068334] ACPI: Core revision 20201113
[    0.068447] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.068474] APIC: Switch to symmetric I/O mode setup
[    0.068477] Switched APIC routing to physical flat.
[    0.069383] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.088477] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33cc1a6723d, max_idle_ns: 440795318719 ns
[    0.088484] Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.87 BogoMIPS (lpj=14373744)
[    0.088486] pid_max: default: 32768 minimum: 301
[    0.091253] LSM: Security Framework initializing
[    0.091267] Yama: becoming mindful.
[    0.091308] AppArmor: AppArmor initialized
[    0.091389] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.091406] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.091739] LVT offset 1 assigned for vector 0xf9
[    0.091782] LVT offset 2 assigned for vector 0xf4
[    0.091796] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.091797] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.091799] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.091801] Spectre V2 : Mitigation: Full AMD retpoline
[    0.091802] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.091803] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.091804] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.092007] Freeing SMP alternatives memory: 40K
[    0.206935] smpboot: CPU0: AMD Ryzen 3 3200G with Radeon Vega Graphics (family: 0x17, model: 0x18, stepping: 0x1)
[    0.207149] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.207154] ... version:                0
[    0.207155] ... bit width:              48
[    0.207155] ... generic registers:      6
[    0.207156] ... value mask:             0000ffffffffffff
[    0.207156] ... max period:             00007fffffffffff
[    0.207157] ... fixed-purpose events:   0
[    0.207157] ... event mask:             000000000000003f
[    0.207227] rcu: Hierarchical SRCU implementation.
[    0.207576] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.207824] smp: Bringing up secondary CPUs ...
[    0.207906] x86: Booting SMP configuration:
[    0.207907] .... node  #0, CPUs:        #1  #2  #3
[    0.210761] smp: Brought up 1 node, 4 CPUs
[    0.210761] smpboot: Max logical packages: 8
[    0.210761] smpboot: Total of 4 processors activated (28747.48 BogoMIPS)
[    0.212806] devtmpfs: initialized
[    0.212806] x86/mm: Memory block size: 128MB
[    0.212875] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
[    0.212875] PM: Registering ACPI NVS region [mem 0x5ba76000-0x5be80fff] (4239360 bytes)
[    0.212875] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.212875] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.212875] pinctrl core: initialized pinctrl subsystem
[    0.212875] PM: RTC time: 04:35:00, date: 2021-05-21
[    0.212948] NET: Registered protocol family 16
[    0.213097] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.213208] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.213350] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.213361] audit: initializing netlink subsys (disabled)
[    0.213373] audit: type=2000 audit(1621571699.144:1): state=initialized audit_enabled=0 res=1
[    0.213373] thermal_sys: Registered thermal governor 'fair_share'
[    0.213373] thermal_sys: Registered thermal governor 'bang_bang'
[    0.213373] thermal_sys: Registered thermal governor 'step_wise'
[    0.213373] thermal_sys: Registered thermal governor 'user_space'
[    0.213373] thermal_sys: Registered thermal governor 'power_allocator'
[    0.213373] EISA bus registered
[    0.213373] cpuidle: using governor ladder
[    0.213373] cpuidle: using governor menu
[    0.213373] ACPI: bus type PCI registered
[    0.213373] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.213373] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.213373] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.213373] PCI: Using configuration type 1 for base access
[    0.213642] Kprobes globally optimized
[    0.213646] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.213646] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.216563] ACPI: Added _OSI(Module Device)
[    0.216564] ACPI: Added _OSI(Processor Device)
[    0.216565] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.216565] ACPI: Added _OSI(Processor Aggregator Device)
[    0.216566] ACPI: Added _OSI(Linux-Dell-Video)
[    0.216567] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.216568] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.225704] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.226697] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.228375] ACPI: Interpreter enabled
[    0.228388] ACPI: (supports S0 S3 S4 S5)
[    0.228390] ACPI: Using IOAPIC for interrupt routing
[    0.228710] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.228939] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.235573] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.235579] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.235746] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.235904] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.235914] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.236224] PCI host bridge to bus 0000:00
[    0.236225] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.236227] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.236228] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.236229] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.236230] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.236231] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.236232] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[    0.236233] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.236235] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.236246] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
[    0.236357] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.236446] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
[    0.236479] pci 0000:00:01.2: enabling Extended Tags
[    0.236532] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.236675] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.236762] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
[    0.236795] pci 0000:00:08.1: enabling Extended Tags
[    0.236837] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.236943] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
[    0.236976] pci 0000:00:08.2: enabling Extended Tags
[    0.237020] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[    0.237154] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.237289] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.237431] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
[    0.237481] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
[    0.237526] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
[    0.237570] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
[    0.237614] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
[    0.237658] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
[    0.237702] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
[    0.237745] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
[    0.237862] pci 0000:01:00.0: [1022:43b9] type 00 class 0x0c0330
[    0.237880] pci 0000:01:00.0: reg 0x10: [mem 0xfcea0000-0xfcea7fff 64bit]
[    0.237919] pci 0000:01:00.0: enabling Extended Tags
[    0.237974] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    0.238076] pci 0000:01:00.1: [1022:43b5] type 00 class 0x010601
[    0.238121] pci 0000:01:00.1: reg 0x24: [mem 0xfce80000-0xfce9ffff]
[    0.238129] pci 0000:01:00.1: reg 0x30: [mem 0xfce00000-0xfce7ffff pref]
[    0.238135] pci 0000:01:00.1: enabling Extended Tags
[    0.238174] pci 0000:01:00.1: PME# supported from D3hot D3cold
[    0.238244] pci 0000:01:00.2: [1022:43b0] type 01 class 0x060400
[    0.238286] pci 0000:01:00.2: enabling Extended Tags
[    0.238330] pci 0000:01:00.2: PME# supported from D3hot D3cold
[    0.238422] pci 0000:00:01.2: PCI bridge to [bus 01-0a]
[    0.238426] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.238429] pci 0000:00:01.2:   bridge window [mem 0xfcd00000-0xfcefffff]
[    0.238527] pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400
[    0.238573] pci 0000:02:00.0: enabling Extended Tags
[    0.238629] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.238721] pci 0000:02:01.0: [1022:43b4] type 01 class 0x060400
[    0.238767] pci 0000:02:01.0: enabling Extended Tags
[    0.238822] pci 0000:02:01.0: PME# supported from D3hot D3cold
[    0.238914] pci 0000:02:02.0: [1022:43b4] type 01 class 0x060400
[    0.238959] pci 0000:02:02.0: enabling Extended Tags
[    0.239015] pci 0000:02:02.0: PME# supported from D3hot D3cold
[    0.239107] pci 0000:02:03.0: [1022:43b4] type 01 class 0x060400
[    0.239153] pci 0000:02:03.0: enabling Extended Tags
[    0.239209] pci 0000:02:03.0: PME# supported from D3hot D3cold
[    0.239301] pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400
[    0.239347] pci 0000:02:04.0: enabling Extended Tags
[    0.239403] pci 0000:02:04.0: PME# supported from D3hot D3cold
[    0.239499] pci 0000:02:06.0: [1022:43b4] type 01 class 0x060400
[    0.239545] pci 0000:02:06.0: enabling Extended Tags
[    0.239601] pci 0000:02:06.0: PME# supported from D3hot D3cold
[    0.239702] pci 0000:02:07.0: [1022:43b4] type 01 class 0x060400
[    0.239747] pci 0000:02:07.0: enabling Extended Tags
[    0.239803] pci 0000:02:07.0: PME# supported from D3hot D3cold
[    0.239899] pci 0000:02:09.0: [1022:43b4] type 01 class 0x060400
[    0.239945] pci 0000:02:09.0: enabling Extended Tags
[    0.240001] pci 0000:02:09.0: PME# supported from D3hot D3cold
[    0.240095] pci 0000:01:00.2: PCI bridge to [bus 02-0a]
[    0.240100] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.240103] pci 0000:01:00.2:   bridge window [mem 0xfcd00000-0xfcdfffff]
[    0.240138] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.240188] pci 0000:02:01.0: PCI bridge to [bus 04]
[    0.240237] pci 0000:02:02.0: PCI bridge to [bus 05]
[    0.240284] pci 0000:02:03.0: PCI bridge to [bus 06]
[    0.240332] pci 0000:02:04.0: PCI bridge to [bus 07]
[    0.240373] pci 0000:02:06.0: PCI bridge to [bus 08]
[    0.240448] pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
[    0.240475] pci 0000:09:00.0: reg 0x10: [io  0xf000-0xf0ff]
[    0.240514] pci 0000:09:00.0: reg 0x18: [mem 0xfcd04000-0xfcd04fff 64bit]
[    0.240537] pci 0000:09:00.0: reg 0x20: [mem 0xfcd00000-0xfcd03fff 64bit]
[    0.240685] pci 0000:09:00.0: supports D1 D2
[    0.240686] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.240861] pci 0000:02:07.0: PCI bridge to [bus 09]
[    0.240865] pci 0000:02:07.0:   bridge window [io  0xf000-0xffff]
[    0.240868] pci 0000:02:07.0:   bridge window [mem 0xfcd00000-0xfcdfffff]
[    0.240903] pci 0000:02:09.0: PCI bridge to [bus 0a]
[    0.241047] pci 0000:0b:00.0: [1002:15d8] type 00 class 0x030000
[    0.241064] pci 0000:0b:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.241075] pci 0000:0b:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.241083] pci 0000:0b:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.241090] pci 0000:0b:00.0: reg 0x24: [mem 0xfcc00000-0xfcc7ffff]
[    0.241103] pci 0000:0b:00.0: enabling Extended Tags
[    0.241120] pci 0000:0b:00.0: BAR 0: assigned to efifb
[    0.241179] pci 0000:0b:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.241288] pci 0000:0b:00.1: [1002:15de] type 00 class 0x040300
[    0.241301] pci 0000:0b:00.1: reg 0x10: [mem 0xfcc88000-0xfcc8bfff]
[    0.241343] pci 0000:0b:00.1: enabling Extended Tags
[    0.241386] pci 0000:0b:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.241453] pci 0000:0b:00.2: [1022:15df] type 00 class 0x108000
[    0.241478] pci 0000:0b:00.2: reg 0x18: [mem 0xfcb00000-0xfcbfffff]
[    0.241497] pci 0000:0b:00.2: reg 0x24: [mem 0xfcc8c000-0xfcc8dfff]
[    0.241509] pci 0000:0b:00.2: enabling Extended Tags
[    0.241623] pci 0000:0b:00.3: [1022:15e0] type 00 class 0x0c0330
[    0.241639] pci 0000:0b:00.3: reg 0x10: [mem 0xfca00000-0xfcafffff 64bit]
[    0.241676] pci 0000:0b:00.3: enabling Extended Tags
[    0.241721] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
[    0.241797] pci 0000:0b:00.4: [1022:15e1] type 00 class 0x0c0330
[    0.241813] pci 0000:0b:00.4: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit]
[    0.241849] pci 0000:0b:00.4: enabling Extended Tags
[    0.241895] pci 0000:0b:00.4: PME# supported from D0 D3hot D3cold
[    0.241975] pci 0000:0b:00.6: [1022:15e3] type 00 class 0x040300
[    0.241988] pci 0000:0b:00.6: reg 0x10: [mem 0xfcc80000-0xfcc87fff]
[    0.242031] pci 0000:0b:00.6: enabling Extended Tags
[    0.242073] pci 0000:0b:00.6: PME# supported from D0 D3hot D3cold
[    0.242160] pci 0000:00:08.1: PCI bridge to [bus 0b]
[    0.242164] pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
[    0.242167] pci 0000:00:08.1:   bridge window [mem 0xfc900000-0xfccfffff]
[    0.242171] pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.242240] pci 0000:0c:00.0: [1022:7901] type 00 class 0x010601
[    0.242283] pci 0000:0c:00.0: reg 0x24: [mem 0xfcf00000-0xfcf007ff]
[    0.242295] pci 0000:0c:00.0: enabling Extended Tags
[    0.242351] pci 0000:0c:00.0: PME# supported from D3hot D3cold
[    0.242444] pci 0000:00:08.2: PCI bridge to [bus 0c]
[    0.242449] pci 0000:00:08.2:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.242991] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.243047] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.243096] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.243156] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.243210] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.243254] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.243299] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.243343] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.244569] iommu: Default domain type: Translated 
[    0.244622] SCSI subsystem initialized
[    0.244636] libata version 3.00 loaded.
[    0.244636] pci 0000:0b:00.0: vgaarb: setting as boot VGA device
[    0.244636] pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.244636] pci 0000:0b:00.0: vgaarb: bridge control possible
[    0.244636] vgaarb: loaded
[    0.244636] ACPI: bus type USB registered
[    0.244636] usbcore: registered new interface driver usbfs
[    0.244636] usbcore: registered new interface driver hub
[    0.244636] usbcore: registered new device driver usb
[    0.244636] pps_core: LinuxPPS API ver. 1 registered
[    0.244636] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.244636] PTP clock support registered
[    0.244636] EDAC MC: Ver: 3.0.0
[    0.244636] Registered efivars operations
[    0.244636] NetLabel: Initializing
[    0.244636] NetLabel:  domain hash size = 128
[    0.244636] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.244636] NetLabel:  unlabeled traffic allowed by default
[    0.244636] PCI: Using ACPI for IRQ routing
[    0.246559] PCI: pci_cache_line_size set to 64 bytes
[    0.246626] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.246627] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
[    0.246629] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.246630] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.246631] e820: reserve RAM buffer [mem 0x563b4018-0x57ffffff]
[    0.246632] e820: reserve RAM buffer [mem 0x5647b000-0x57ffffff]
[    0.246633] e820: reserve RAM buffer [mem 0x56b6e000-0x57ffffff]
[    0.246633] e820: reserve RAM buffer [mem 0x59298000-0x5bffffff]
[    0.246634] e820: reserve RAM buffer [mem 0x5a42c000-0x5bffffff]
[    0.246635] e820: reserve RAM buffer [mem 0x5ba76000-0x5bffffff]
[    0.246635] e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff]
[    0.246636] e820: reserve RAM buffer [mem 0x21f340000-0x21fffffff]
[    0.246639] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.246639] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.248507] clocksource: Switched to clocksource tsc-early
[    0.255980] VFS: Disk quotas dquot_6.6.0
[    0.256008] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.256123] AppArmor: AppArmor Filesystem Enabled
[    0.256154] pnp: PnP ACPI init
[    0.256319] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.256328] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.256360] system 00:01: [mem 0xfeb80000-0xfebfffff] has been reserved
[    0.256363] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.256417] system 00:02: [mem 0x60000000-0xdfffffff window] has been reserved
[    0.256420] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.256571] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.256753] system 00:04: [io  0x0280-0x028f] has been reserved
[    0.256755] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.256757] system 00:04: [io  0x02a0-0x02af] has been reserved
[    0.256758] system 00:04: [io  0x02b0-0x02bf] has been reserved
[    0.256761] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.257020] pnp 00:05: [dma 0 disabled]
[    0.257049] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.257274] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.257276] system 00:06: [io  0x040b] has been reserved
[    0.257277] system 00:06: [io  0x04d6] has been reserved
[    0.257278] system 00:06: [io  0x0c00-0x0c01] has been reserved
[    0.257279] system 00:06: [io  0x0c14] has been reserved
[    0.257280] system 00:06: [io  0x0c50-0x0c51] has been reserved
[    0.257281] system 00:06: [io  0x0c52] has been reserved
[    0.257283] system 00:06: [io  0x0c6c] has been reserved
[    0.257283] system 00:06: [io  0x0c6f] has been reserved
[    0.257284] system 00:06: [io  0x0cd0-0x0cd1] has been reserved
[    0.257285] system 00:06: [io  0x0cd2-0x0cd3] has been reserved
[    0.257286] system 00:06: [io  0x0cd4-0x0cd5] has been reserved
[    0.257287] system 00:06: [io  0x0cd6-0x0cd7] has been reserved
[    0.257288] system 00:06: [io  0x0cd8-0x0cdf] has been reserved
[    0.257289] system 00:06: [io  0x0800-0x089f] has been reserved
[    0.257291] system 00:06: [io  0x0b00-0x0b0f] has been reserved
[    0.257292] system 00:06: [io  0x0b20-0x0b3f] has been reserved
[    0.257293] system 00:06: [io  0x0900-0x090f] has been reserved
[    0.257294] system 00:06: [io  0x0910-0x091f] has been reserved
[    0.257295] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.257296] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.257297] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.257299] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.257300] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.257301] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.257302] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.257305] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.257748] pnp: PnP ACPI: found 7 devices
[    0.263257] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.263314] NET: Registered protocol family 2
[    0.263567] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.263635] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.263799] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.263867] TCP: Hash tables configured (established 65536 bind 65536)
[    0.263958] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.263987] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.264012] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.264092] NET: Registered protocol family 1
[    0.264096] NET: Registered protocol family 44
[    0.264118] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.264130] pci 0000:02:01.0: PCI bridge to [bus 04]
[    0.264140] pci 0000:02:02.0: PCI bridge to [bus 05]
[    0.264149] pci 0000:02:03.0: PCI bridge to [bus 06]
[    0.264159] pci 0000:02:04.0: PCI bridge to [bus 07]
[    0.264169] pci 0000:02:06.0: PCI bridge to [bus 08]
[    0.264179] pci 0000:02:07.0: PCI bridge to [bus 09]
[    0.264181] pci 0000:02:07.0:   bridge window [io  0xf000-0xffff]
[    0.264185] pci 0000:02:07.0:   bridge window [mem 0xfcd00000-0xfcdfffff]
[    0.264192] pci 0000:02:09.0: PCI bridge to [bus 0a]
[    0.264201] pci 0000:01:00.2: PCI bridge to [bus 02-0a]
[    0.264203] pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
[    0.264207] pci 0000:01:00.2:   bridge window [mem 0xfcd00000-0xfcdfffff]
[    0.264213] pci 0000:00:01.2: PCI bridge to [bus 01-0a]
[    0.264215] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.264218] pci 0000:00:01.2:   bridge window [mem 0xfcd00000-0xfcefffff]
[    0.264224] pci 0000:00:08.1: PCI bridge to [bus 0b]
[    0.264230] pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
[    0.264233] pci 0000:00:08.1:   bridge window [mem 0xfc900000-0xfccfffff]
[    0.264236] pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.264240] pci 0000:00:08.2: PCI bridge to [bus 0c]
[    0.264243] pci 0000:00:08.2:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.264250] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.264251] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.264252] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.264253] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.264254] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.264255] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.264256] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.264257] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.264259] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.264260] pci_bus 0000:01: resource 1 [mem 0xfcd00000-0xfcefffff]
[    0.264261] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.264261] pci_bus 0000:02: resource 1 [mem 0xfcd00000-0xfcdfffff]
[    0.264263] pci_bus 0000:09: resource 0 [io  0xf000-0xffff]
[    0.264264] pci_bus 0000:09: resource 1 [mem 0xfcd00000-0xfcdfffff]
[    0.264265] pci_bus 0000:0b: resource 0 [io  0xe000-0xefff]
[    0.264266] pci_bus 0000:0b: resource 1 [mem 0xfc900000-0xfccfffff]
[    0.264266] pci_bus 0000:0b: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.264268] pci_bus 0000:0c: resource 1 [mem 0xfcf00000-0xfcffffff]
[    0.264491] pci 0000:0b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.264513] pci 0000:0b:00.1: D0 power state depends on 0000:0b:00.0
[    0.264520] pci 0000:0b:00.3: extending delay after power-on from D3hot to 20 msec
[    0.264665] pci 0000:0b:00.4: extending delay after power-on from D3hot to 20 msec
[    0.264738] PCI: CLS 64 bytes, default 64
[    0.264775] Trying to unpack rootfs image as initramfs...
[    0.380008] Freeing initrd memory: 59144K
[    0.380052] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.380054] software IO TLB: mapped [mem 0x00000000523b0000-0x00000000563b0000] (64MB)
[    0.380135] amd_uncore: 4  amd_df counters detected
[    0.380148] amd_uncore: 6  amd_l3 counters detected
[    0.380278] check: Scanning for low memory corruption every 60 seconds
[    0.380852] Initialise system trusted keyrings
[    0.380867] Key type blacklist registered
[    0.380896] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.381994] zbud: loaded
[    0.382283] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.382402] fuse: init (API version 7.33)
[    0.382543] integrity: Platform Keyring initialized
[    0.391831] Key type asymmetric registered
[    0.391833] Asymmetric key parser 'x509' registered
[    0.391839] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.391877] io scheduler mq-deadline registered
[    0.392503] pcieport 0000:00:01.2: PME: Signaling with IRQ 25
[    0.392568] pcieport 0000:00:01.2: AER: enabled with IRQ 25
[    0.392673] pcieport 0000:00:08.1: PME: Signaling with IRQ 26
[    0.392832] pcieport 0000:00:08.2: PME: Signaling with IRQ 27
[    0.392876] pcieport 0000:00:08.2: AER: enabled with IRQ 27
[    0.394180] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.394232] efifb: probing for efifb
[    0.394254] efifb: showing boot graphics
[    0.396490] efifb: framebuffer at 0xe0000000, using 8100k, total 8100k
[    0.396492] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.396493] efifb: scrolling: redraw
[    0.396493] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.396523] fbcon: Deferring console take-over
[    0.396524] fb0: EFI VGA frame buffer device
[    0.396605] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.396618] ACPI: Power Button [PWRB]
[    0.396640] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.396665] ACPI: Power Button [PWRF]
[    0.397013] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.418220] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.419875] Linux agpgart interface v0.103
[    0.423432] loop: module loaded
[    0.423734] libphy: Fixed MDIO Bus: probed
[    0.423736] tun: Universal TUN/TAP device driver, 1.6
[    0.423761] PPP generic driver version 2.4.2
[    0.423806] VFIO - User Level meta-driver version: 0.3
[    0.423855] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.423859] ehci-pci: EHCI PCI platform driver
[    0.423872] ehci-platform: EHCI generic platform driver
[    0.423880] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.423882] ohci-pci: OHCI PCI platform driver
[    0.423890] ohci-platform: OHCI generic platform driver
[    0.423895] uhci_hcd: USB Universal Host Controller Interface driver
[    0.423930] i8042: PNP: No PS/2 controller found.
[    0.423972] mousedev: PS/2 mouse device common for all mice
[    0.424069] rtc_cmos 00:03: RTC can wake from S4
[    0.424315] rtc_cmos 00:03: registered as rtc0
[    0.424357] rtc_cmos 00:03: setting system clock to 2021-05-21T04:35:00 UTC (1621571700)
[    0.424373] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.424381] i2c /dev entries driver
[    0.424419] device-mapper: uevent: version 1.0.3
[    0.424462] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[    0.424479] platform eisa.0: Probing EISA bus 0
[    0.424481] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.424483] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.424484] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.424485] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.424487] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.424488] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.424489] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.424490] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.424492] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.424493] platform eisa.0: EISA: Detected 0 cards
[    0.424525] ledtrig-cpu: registered to indicate activity on CPUs
[    0.424528] EFI Variables Facility v0.08 2004-May-17
[    0.433037] drop_monitor: Initializing network drop monitor service
[    0.433151] NET: Registered protocol family 10
[    0.436470] Segment Routing with IPv6
[    0.436493] NET: Registered protocol family 17
[    0.436520] Key type dns_resolver registered
[    0.436781] microcode: CPU0: patch_level=0x08108109
[    0.436785] microcode: CPU1: patch_level=0x08108109
[    0.436790] microcode: CPU2: patch_level=0x08108109
[    0.436796] microcode: CPU3: patch_level=0x08108109
[    0.436813] microcode: Microcode Update Driver: v2.2.
[    0.436817] IPI shorthand broadcast: enabled
[    0.436827] sched_clock: Marking stable (436425151, 386321)->(464260802, -27449330)
[    0.436874] registered taskstats version 1
[    0.436885] Loading compiled-in X.509 certificates
[    0.437334] Loaded X.509 cert 'Build time autogenerated kernel key: 6ec6db31095fc159bcabc498b17cdcf29c17f6fc'
[    0.437720] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.438104] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.439281] zswap: loaded using pool lzo/zbud
[    0.439417] Key type ._fscrypt registered
[    0.439418] Key type .fscrypt registered
[    0.439418] Key type fscrypt-provisioning registered
[    0.441406] Key type encrypted registered
[    0.441408] AppArmor: AppArmor sha1 policy hashing enabled
[    0.441914] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[    0.442093] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.442095] ima: No TPM chip found, activating TPM-bypass!
[    0.442099] ima: Allocated hash algorithm: sha1
[    0.442105] ima: No architecture policies found
[    0.442111] evm: Initialising EVM extended attributes:
[    0.442111] evm: security.selinux
[    0.442112] evm: security.SMACK64
[    0.442113] evm: security.SMACK64EXEC
[    0.442113] evm: security.SMACK64TRANSMUTE
[    0.442114] evm: security.SMACK64MMAP
[    0.442114] evm: security.apparmor
[    0.442114] evm: security.ima
[    0.442115] evm: security.capability
[    0.442115] evm: HMAC attrs: 0x1
[    0.442459] PM:   Magic number: 5:24:566
[    0.442663] acpi_cpufreq: overriding BIOS provided _PSD data
[    0.442919] RAS: Correctable Errors collector initialized.
[    0.444190] Freeing unused decrypted memory: 2036K
[    0.444536] Freeing unused kernel image (initmem) memory: 2688K
[    0.461039] Write protecting the kernel read-only data: 28672k
[    0.461792] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.461859] Freeing unused kernel image (rodata/data gap) memory: 92K
[    0.492988] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.492999] Run /init as init process
[    0.493000]   with arguments:
[    0.493002]     /init
[    0.493003]     splash
[    0.493004]   with environment:
[    0.493004]     HOME=/
[    0.493005]     TERM=linux
[    0.493005]     BOOT_IMAGE=/boot/vmlinuz-5.11.0-17-generic
[    0.560954] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    0.561898] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GP17.VGA.LCD._BCM.AFN7], AE_NOT_FOUND (20201113/psargs-330)

[    0.561907] 
               Initialized Local Variables for Method [_BCM]:
[    0.561908]   Local0: 0000000030f15311 <Obj>           Integer 00000000000000FF
[    0.561913]   Local1: 0000000029b93454 <Obj>           Integer 0000000000000000

[    0.561916] Initialized Arguments for Method [_BCM]:  (1 arguments defined for method invocation)
[    0.561917]   Arg0:   000000006bff6a52 <Obj>           Integer 0000000000000064

[    0.561921] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[    0.561927] ACPI Error: Evaluating _BCM failed (20201113/video-357)
[    0.561972] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/LNXVIDEO:01/input/input2
[    0.565274] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.565281] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    0.565874] ahci 0000:01:00.1: version 3.0
[    0.565979] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[    0.566038] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[    0.566041] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    0.566740] scsi host0: ahci
[    0.566846] scsi host1: ahci
[    0.566919] scsi host2: ahci
[    0.566992] scsi host3: ahci
[    0.567075] scsi host4: ahci
[    0.572228] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    0.572231] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    0.572364] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    0.586352] libphy: r8169: probed
[    0.586507] r8169 0000:09:00.0 eth0: RTL8168h/8111h, a8:a1:59:1e:f8:d6, XID 541, IRQ 42
[    0.586511] r8169 0000:09:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    0.601008] scsi host5: ahci
[    0.601300] r8169 0000:09:00.0 enp9s0: renamed from eth0
[    0.601333] scsi host6: ahci
[    0.601413] scsi host7: ahci
[    0.601445] ata1: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80100 irq 41
[    0.601448] ata2: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80180 irq 41
[    0.601450] ata3: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80200 irq 41
[    0.601452] ata4: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80280 irq 41
[    0.601454] ata5: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80300 irq 41
[    0.601456] ata6: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80380 irq 41
[    0.601458] ata7: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80400 irq 41
[    0.601459] ata8: SATA max UDMA/133 abar m131072@0xfce80000 port 0xfce80480 irq 41
[    0.615513] ahci 0000:0c:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.615521] ahci 0000:0c:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
[    0.615767] scsi host8: ahci
[    0.615825] ata9: SATA max UDMA/133 abar m2048@0xfcf00000 port 0xfcf00100 irq 44
[    0.620715] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000010008000410
[    0.620973] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[    0.620977] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.620979] usb usb1: Product: xHCI Host Controller
[    0.620980] usb usb1: Manufacturer: Linux 5.11.0-17-generic xhci-hcd
[    0.620982] usb usb1: SerialNumber: 0000:01:00.0
[    0.621114] hub 1-0:1.0: USB hub found
[    0.621135] hub 1-0:1.0: 14 ports detected
[    0.621575] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.621578] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    0.621581] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.621618] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.621642] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[    0.621644] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.621646] usb usb2: Product: xHCI Host Controller
[    0.621647] usb usb2: Manufacturer: Linux 5.11.0-17-generic xhci-hcd
[    0.621648] usb usb2: SerialNumber: 0000:01:00.0
[    0.621725] hub 2-0:1.0: USB hub found
[    0.621738] hub 2-0:1.0: 8 ports detected
[    0.622703] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[    0.622708] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 3
[    0.622855] xhci_hcd 0000:0b:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410
[    0.623082] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[    0.623085] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.623086] usb usb3: Product: xHCI Host Controller
[    0.623088] usb usb3: Manufacturer: Linux 5.11.0-17-generic xhci-hcd
[    0.623089] usb usb3: SerialNumber: 0000:0b:00.3
[    0.623171] hub 3-0:1.0: USB hub found
[    0.623184] hub 3-0:1.0: 4 ports detected
[    0.624259] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[    0.624264] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 4
[    0.624267] xhci_hcd 0000:0b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    0.624314] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.624334] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[    0.624336] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.624337] usb usb4: Product: xHCI Host Controller
[    0.624339] usb usb4: Manufacturer: Linux 5.11.0-17-generic xhci-hcd
[    0.624340] usb usb4: SerialNumber: 0000:0b:00.3
[    0.624425] hub 4-0:1.0: USB hub found
[    0.624438] hub 4-0:1.0: 4 ports detected
[    0.624972] xhci_hcd 0000:0b:00.4: xHCI Host Controller
[    0.624977] xhci_hcd 0000:0b:00.4: new USB bus registered, assigned bus number 5
[    0.625111] xhci_hcd 0000:0b:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410
[    0.625340] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[    0.625342] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.625344] usb usb5: Product: xHCI Host Controller
[    0.625345] usb usb5: Manufacturer: Linux 5.11.0-17-generic xhci-hcd
[    0.625346] usb usb5: SerialNumber: 0000:0b:00.4
[    0.625424] hub 5-0:1.0: USB hub found
[    0.625434] hub 5-0:1.0: 1 port detected
[    0.625550] xhci_hcd 0000:0b:00.4: xHCI Host Controller
[    0.625553] xhci_hcd 0000:0b:00.4: new USB bus registered, assigned bus number 6
[    0.625556] xhci_hcd 0000:0b:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[    0.625580] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.625598] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[    0.625600] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.625602] usb usb6: Product: xHCI Host Controller
[    0.625603] usb usb6: Manufacturer: Linux 5.11.0-17-generic xhci-hcd
[    0.625604] usb usb6: SerialNumber: 0000:0b:00.4
[    0.625677] hub 6-0:1.0: USB hub found
[    0.625688] hub 6-0:1.0: 1 port detected
[    0.931434] ata9: SATA link down (SStatus 0 SControl 300)
[    0.965050] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[    0.965071] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[    1.083410] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.083661] ata1.00: supports DRM functions and may not be fully accessible
[    1.091313] ata1.00: disabling queued TRIM support
[    1.091315] ata1.00: ATA-9: Crucial_CT256M550SSD1, MU01, max UDMA/133
[    1.091316] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.108149] ata1.00: supports DRM functions and may not be fully accessible
[    1.110609] usb 5-1: New USB device found, idVendor=1224, idProduct=2a25, bcdDevice= 1.00
[    1.110617] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.110622] usb 5-1: Product: USB PHY 2.0
[    1.110625] usb 5-1: Manufacturer: Jieli Technology
[    1.115807] ata1.00: disabling queued TRIM support
[    1.126401] usb 3-2: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
[    1.126409] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.126412] usb 3-2: Product: USB Keyboard
[    1.126415] usb 3-2: Manufacturer: Logitech
[    1.132409] ata1.00: configured for UDMA/133
[    1.132673] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT256M55 MU01 PQ: 0 ANSI: 5
[    1.132950] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.132960] ata1.00: Enabling discard_zeroes_data
[    1.133026] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.133031] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.133044] sd 0:0:0:0: [sda] Write Protect is off
[    1.133048] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.133089] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.149838]  sda: sda1 sda2 sda3
[    1.150598] ata1.00: Enabling discard_zeroes_data
[    1.150863] sd 0:0:0:0: [sda] supports TCG Opal
[    1.150868] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.336500] usb 3-3: new full-speed USB device number 3 using xhci_hcd
[    1.408502] tsc: Refined TSC clocksource calibration: 3593.236 MHz
[    1.408517] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb5d1ce9e, max_idle_ns: 440795242262 ns
[    1.408543] clocksource: Switched to clocksource tsc
[    1.450699] ata2: SATA link down (SStatus 0 SControl 300)
[    1.510325] usb 3-3: New USB device found, idVendor=046d, idProduct=c08e, bcdDevice=40.00
[    1.510331] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.510334] usb 3-3: Product: MX518 Gaming Mouse
[    1.510337] usb 3-3: Manufacturer: Logitech
[    1.510340] usb 3-3: SerialNumber: 036539763438
[    1.595639] hid: raw HID events driver (C) Jiri Kosina
[    1.627664] usbcore: registered new interface driver usbhid
[    1.627670] usbhid: USB HID core driver
[    1.631855] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb3/3-2/3-2:1.0/0003:046D:C31C.0001/input/input3
[    1.688645] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:0b:00.3-2/input0
[    1.688965] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb3/3-2/3-2:1.1/0003:046D:C31C.0002/input/input4
[    1.748604] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb3/3-2/3-2:1.1/0003:046D:C31C.0002/input/input5
[    1.748706] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:0b:00.3-2/input1
[    1.748925] input: Logitech MX518 Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb3/3-3/3-3:1.0/0003:046D:C08E.0003/input/input6
[    1.749052] hid-generic 0003:046D:C08E.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech MX518 Gaming Mouse] on usb-0000:0b:00.3-3/input0
[    1.749540] input: Logitech MX518 Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb3/3-3/3-3:1.1/0003:046D:C08E.0004/input/input7
[    1.762687] ata3: SATA link down (SStatus 0 SControl 300)
[    1.808624] input: Logitech MX518 Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb3/3-3/3-3:1.1/0003:046D:C08E.0004/input/input8
[    1.808708] input: Logitech MX518 Gaming Mouse System Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb3/3-3/3-3:1.1/0003:046D:C08E.0004/input/input9
[    1.808852] hid-generic 0003:046D:C08E.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech MX518 Gaming Mouse] on usb-0000:0b:00.3-3/input1
[    2.074708] ata4: SATA link down (SStatus 0 SControl 300)
[    2.386671] ata5: SATA link down (SStatus 0 SControl 300)
[    2.698681] ata6: SATA link down (SStatus 0 SControl 300)
[    3.736494] ata7: failed to resume link (SControl 0)
[    3.736514] ata7: SATA link down (SStatus 0 SControl 0)
[    4.050696] ata8: SATA link down (SStatus 0 SControl 330)
[    4.116453] fbcon: Taking over console
[    4.116531] Console: switching to colour frame buffer device 240x67
[    4.130798] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    4.239297] systemd[1]: Inserted module 'autofs4'
[    4.272322] systemd[1]: systemd 247.3-3ubuntu3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    4.288537] systemd[1]: Detected architecture x86-64.
[    4.309242] systemd[1]: Set hostname to <gerard>.
[    4.385212] systemd[1]: /lib/systemd/system/plymouth-start.service:17: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[    4.405913] systemd[1]: Queued start job for default target Graphical Interface.
[    4.410857] systemd[1]: Created slice system-modprobe.slice.
[    4.411129] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.411307] systemd[1]: Created slice User and Session Slice.
[    4.411358] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.411488] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.411537] systemd[1]: Reached target User and Group Name Lookups.
[    4.411553] systemd[1]: Reached target Remote File Systems.
[    4.411561] systemd[1]: Reached target Slices.
[    4.411677] systemd[1]: Listening on Syslog Socket.
[    4.411746] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.411781] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.411892] systemd[1]: Listening on Journal Audit Socket.
[    4.411953] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.412024] systemd[1]: Listening on Journal Socket.
[    4.412105] systemd[1]: Listening on udev Control Socket.
[    4.412165] systemd[1]: Listening on udev Kernel Socket.
[    4.412875] systemd[1]: Mounting Huge Pages File System...
[    4.413424] systemd[1]: Mounting POSIX Message Queue File System...
[    4.414098] systemd[1]: Mounting Kernel Debug File System...
[    4.414725] systemd[1]: Mounting Kernel Trace File System...
[    4.415940] systemd[1]: Starting Journal Service...
[    4.416832] systemd[1]: Starting Set the console keyboard layout...
[    4.417696] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    4.418391] systemd[1]: Starting Load Kernel Module configfs...
[    4.419092] systemd[1]: Starting Load Kernel Module drm...
[    4.419851] systemd[1]: Starting Load Kernel Module fuse...
[    4.421891] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    4.421936] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    4.423089] systemd[1]: Starting Load Kernel Modules...
[    4.423931] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.424723] systemd[1]: Starting Coldplug All udev Devices...
[    4.425465] systemd[1]: Starting Uncomplicated firewall...
[    4.426761] systemd[1]: Mounted Huge Pages File System.
[    4.426850] systemd[1]: Mounted POSIX Message Queue File System.
[    4.426895] systemd[1]: Mounted Kernel Debug File System.
[    4.426943] systemd[1]: Mounted Kernel Trace File System.
[    4.427260] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    4.427432] systemd[1]: modprobe@configfs.service: Succeeded.
[    4.427637] systemd[1]: Finished Load Kernel Module configfs.
[    4.427763] systemd[1]: modprobe@fuse.service: Succeeded.
[    4.427954] systemd[1]: Finished Load Kernel Module fuse.
[    4.428814] systemd[1]: Mounting FUSE Control File System...
[    4.429613] systemd[1]: Mounting Kernel Configuration File System...
[    4.431823] systemd[1]: Mounted FUSE Control File System.
[    4.434554] systemd[1]: modprobe@drm.service: Succeeded.
[    4.434800] systemd[1]: Finished Load Kernel Module drm.
[    4.437808] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[    4.440117] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.440460] systemd[1]: Finished Uncomplicated firewall.
[    4.440725] systemd[1]: Mounted Kernel Configuration File System.
[    4.441339] systemd[1]: Activating swap /swapfile...
[    4.441725] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    4.441768] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    4.442464] systemd[1]: Starting Load/Save Random Seed...
[    4.443156] lp: driver loaded but no devices found
[    4.445353] systemd[1]: Starting Create System Users...
[    4.450748] ppdev: user-space parallel port driver
[    4.467692] systemd[1]: Finished Set the console keyboard layout.
[    4.468448] systemd[1]: Finished Create System Users.
[    4.469156] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.469790] systemd[1]: Finished Load/Save Random Seed.
[    4.469894] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[    4.472899] systemd[1]: Finished Load Kernel Modules.
[    4.473625] systemd[1]: Starting Apply Kernel Variables...
[    4.476587] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[    4.476844] systemd[1]: Finished Create Static Device Nodes in /dev.
[    4.476940] systemd[1]: Activated swap /swapfile.
[    4.476973] systemd[1]: Reached target Local File Systems (Pre).
[    4.476993] systemd[1]: Reached target Swap.
[    4.478189] systemd[1]: Mounting Mount unit for core18, revision 1997...
[    4.479005] systemd[1]: Mounting Mount unit for core18, revision 2066...
[    4.480005] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 66...
[    4.481094] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1514...
[    4.482062] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1515...
[    4.483100] systemd[1]: Mounting Mount unit for snap-store, revision 518...
[    4.484111] systemd[1]: Mounting Mount unit for snapd, revision 11588...
[    4.485093] systemd[1]: Mounting Mount unit for snapd, revision 11841...
[    4.486144] loop0: detected capacity change from 0 to 113560
[    4.486288] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    4.486520] systemd[1]: Started Journal Service.
[    4.491387] systemd-journald[285]: Received client request to flush runtime journal.
[    4.496797] loop1: detected capacity change from 0 to 133320
[    4.496866] loop2: detected capacity change from 0 to 113504
[    4.496929] loop3: detected capacity change from 0 to 104536
[    4.516633] loop4: detected capacity change from 0 to 132648
[    4.569052] loop5: detected capacity change from 0 to 66096
[    4.613407] loop6: detected capacity change from 0 to 448496
[    4.629824] loop7: detected capacity change from 0 to 65712
[    4.698760] ccp 0000:0b:00.2: ccp enabled
[    4.698770] ccp 0000:0b:00.2: psp: unable to access the device: you might be running a broken BIOS.
[    4.739838] pstore: Using crash dump compression: deflate
[    4.739849] pstore: Registered efi as persistent store backend
[    4.763979] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[    4.763983] RAPL PMU: hw unit of domain package 2^-16 Joules
[    4.768994] cryptd: max_cpu_qlen set to 1000
[    4.774202] AVX2 version of gcm_enc/dec engaged.
[    4.774204] AES CTR mode by8 optimization enabled
[    4.794718] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    4.794721] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    4.849146] mc: Linux media interface: v0.10
[    4.855617] videodev: Linux video capture interface: v2.00
[    4.864439] kvm: Nested Virtualization enabled
[    4.864505] SVM: kvm: Nested Paging enabled
[    4.864506] SVM: Virtual VMLOAD VMSAVE supported
[    4.864507] SVM: Virtual GIF supported
[    4.874443] MCE: In-kernel MCE decoding enabled.
[    4.876734] EDAC amd64: F17h_M10h detected (node 0).
[    4.876789] EDAC amd64: Node 0: DRAM ECC disabled.
[    4.879197] uvcvideo: Found UVC 1.00 device USB PHY 2.0 (1224:2a25)
[    4.895143] input: USB PHY 2.0: USB CAMERA as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/usb5/5-1/5-1:1.0/input/input12
[    4.895210] usbcore: registered new interface driver uvcvideo
[    4.895211] USB Video Class driver (1.1.1)
[    4.915526] usb 5-1: failed to read current rate; disabling the check
[    4.930612] usb 5-1: Warning! Unlikely big volume range (=4096), cval->res is probably wrong.
[    4.930617] usb 5-1: [3] FU [Mic Capture Volume] ch = 1, val = 0/4096/1
[    4.930760] usbcore: registered new interface driver snd-usb-audio
[    4.937122] EDAC amd64: F17h_M10h detected (node 0).
[    4.937177] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.001880] EDAC amd64: F17h_M10h detected (node 0).
[    5.001934] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.002715] [drm] amdgpu kernel modesetting enabled.
[    5.002757] intel_rapl_common: Found RAPL domain package
[    5.002759] intel_rapl_common: Found RAPL domain core
[    5.003376] amdgpu: Topology: Add APU node [0x0:0x0]
[    5.003868] checking generic (e0000000 7e9000) vs hw (e0000000 10000000)
[    5.003870] fb0: switching to amdgpudrmfb from EFI VGA
[    5.004012] Console: switching to colour dummy device 80x25
[    5.005670] amdgpu 0000:0b:00.0: vgaarb: deactivate vga console
[    5.005827] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x1002:0x15D8 0xC9).
[    5.005831] amdgpu 0000:0b:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
[    5.005844] [drm] register mmio base: 0xFCC00000
[    5.005845] [drm] register mmio size: 524288
[    5.005856] [drm] add ip block number 0 <soc15_common>
[    5.005857] [drm] add ip block number 1 <gmc_v9_0>
[    5.005858] [drm] add ip block number 2 <vega10_ih>
[    5.005859] [drm] add ip block number 3 <psp>
[    5.005860] [drm] add ip block number 4 <gfx_v9_0>
[    5.005861] [drm] add ip block number 5 <sdma_v4_0>
[    5.005862] [drm] add ip block number 6 <powerplay>
[    5.005863] [drm] add ip block number 7 <dm>
[    5.005863] [drm] add ip block number 8 <vcn_v1_0>
[    5.016893] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card0/input13
[    5.016945] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card0/input14
[    5.016972] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card0/input15
[    5.031385] [drm] BIOS signature incorrect 0 0
[    5.031421] amdgpu 0000:0b:00.0: amdgpu: Fetched VBIOS from ROM BAR
[    5.031424] amdgpu: ATOM BIOS: 113-PICASSO-115
[    5.031782] [drm] VCN decode is enabled in VM mode
[    5.031783] [drm] VCN encode is enabled in VM mode
[    5.031784] [drm] JPEG decode is enabled in VM mode
[    5.031816] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    5.031824] amdgpu 0000:0b:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[    5.031827] amdgpu 0000:0b:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[    5.031829] amdgpu 0000:0b:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[    5.031834] [drm] Detected VRAM RAM=2048M, BAR=2048M
[    5.031835] [drm] RAM width 64bits DDR4
[    5.031888] [TTM] Zone  kernel: Available graphics memory: 3000042 KiB
[    5.031890] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    5.031949] [drm] amdgpu: 2048M of VRAM memory ready
[    5.031951] [drm] amdgpu: 3072M of GTT memory ready.
[    5.031953] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    5.032095] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[    5.032571] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    5.032575] snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.032577] snd_hda_codec_realtek hdaudioC2D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.032579] snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
[    5.032580] snd_hda_codec_realtek hdaudioC2D0:    inputs:
[    5.032581] snd_hda_codec_realtek hdaudioC2D0:      Front Mic=0x19
[    5.032582] snd_hda_codec_realtek hdaudioC2D0:      Rear Mic=0x18
[    5.032583] snd_hda_codec_realtek hdaudioC2D0:      Line=0x1a
[    5.036689] amdgpu: hwmgr_sw_init smu backed is smu10_smu
[    5.037985] [drm] Found VCN firmware Version ENC: 1.12 DEC: 2 VEP: 0 Revision: 5
[    5.037990] [drm] PSP loading VCN firmware
[    5.058668] [drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
[    5.073075] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.6/sound/card2/input16
[    5.073125] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.6/sound/card2/input17
[    5.073166] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0b:00.6/sound/card2/input18
[    5.073203] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0b:00.6/sound/card2/input19
[    5.073240] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0b:00.6/sound/card2/input20
[    5.094507] EDAC amd64: F17h_M10h detected (node 0).
[    5.094558] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.260520] amdgpu 0000:0b:00.0: amdgpu: RAS: optional ras ta ucode is not available
[    5.284520] amdgpu 0000:0b:00.0: amdgpu: RAP: optional rap ta ucode is not available
[    5.286332] [drm] kiq ring mec 2 pipe 1 q 0
[    5.286855] [drm] DM_PPLIB: values for F clock
[    5.286856] [drm] DM_PPLIB:	 400000 in kHz, 3099 in mV
[    5.286857] [drm] DM_PPLIB:	 933000 in kHz, 3574 in mV
[    5.286858] [drm] DM_PPLIB:	 1067000 in kHz, 4250 in mV
[    5.286859] [drm] DM_PPLIB:	 1200000 in kHz, 4399 in mV
[    5.286860] [drm] DM_PPLIB: values for DCF clock
[    5.286861] [drm] DM_PPLIB:	 300000 in kHz, 3099 in mV
[    5.286861] [drm] DM_PPLIB:	 600000 in kHz, 3574 in mV
[    5.286862] [drm] DM_PPLIB:	 626000 in kHz, 4250 in mV
[    5.286863] [drm] DM_PPLIB:	 654000 in kHz, 4399 in mV
[    5.287139] [drm] Display Core initialized with v3.2.116!
[    5.324210] snd_hda_intel 0000:0b:00.1: bound 0000:0b:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    5.361034] [drm] VCN decode and encode initialized successfully(under SPG Mode).
[    5.362224] kfd kfd: Allocated 3969056 bytes on gart
[    5.362310] kfd kfd: error getting iommu info. is the iommu enabled?
[    5.362314] kfd kfd: Error initializing iommuv2
[    5.362697] kfd kfd: device 1002:15d8 NOT added due to errors
[    5.362700] amdgpu 0000:0b:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 11, active_cu_number 8
[    5.364399] [drm] fb mappable at 0x60BCA000
[    5.364402] [drm] vram apper at 0x60000000
[    5.364403] [drm] size 8294400
[    5.364404] [drm] fb depth is 24
[    5.364404] [drm]    pitch is 7680
[    5.364475] fbcon: amdgpudrmfb (fb0) is primary device
[    5.364558] Console: switching to colour frame buffer device 240x67
[    5.364581] amdgpu 0000:0b:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[    5.384654] amdgpu 0000:0b:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[    5.384658] amdgpu 0000:0b:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[    5.384659] amdgpu 0000:0b:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[    5.384661] amdgpu 0000:0b:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[    5.384662] amdgpu 0000:0b:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[    5.384663] amdgpu 0000:0b:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[    5.384664] amdgpu 0000:0b:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[    5.384665] amdgpu 0000:0b:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[    5.384667] amdgpu 0000:0b:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[    5.384668] amdgpu 0000:0b:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[    5.384669] amdgpu 0000:0b:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
[    5.384670] amdgpu 0000:0b:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
[    5.384671] amdgpu 0000:0b:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
[    5.384672] amdgpu 0000:0b:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
[    5.384673] amdgpu 0000:0b:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[    5.389284] audit: type=1400 audit(1621571705.460:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=653 comm="apparmor_parser"
[    5.389287] audit: type=1400 audit(1621571705.460:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=653 comm="apparmor_parser"
[    5.389388] audit: type=1400 audit(1621571705.460:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=652 comm="apparmor_parser"
[    5.391805] audit: type=1400 audit(1621571705.460:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=654 comm="apparmor_parser"
[    5.391810] audit: type=1400 audit(1621571705.460:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=654 comm="apparmor_parser"
[    5.391812] audit: type=1400 audit(1621571705.460:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=654 comm="apparmor_parser"
[    5.392184] [drm] Initialized amdgpu 3.40.0 20150101 for 0000:0b:00.0 on minor 0
[    5.401217] audit: type=1400 audit(1621571705.472:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=657 comm="apparmor_parser"
[    5.405921] audit: type=1400 audit(1621571705.476:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=656 comm="apparmor_parser"
[    5.405926] audit: type=1400 audit(1621571705.476:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=656 comm="apparmor_parser"
[    5.405928] audit: type=1400 audit(1621571705.476:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=656 comm="apparmor_parser"
[    5.964516] Generic FE-GE Realtek PHY r8169-900:00: attached PHY driver (mii_bus:phy_addr=r8169-900:00, irq=IGNORE)
[    6.168619] r8169 0000:09:00.0 enp9s0: Link is Down
[    6.441624] loop8: detected capacity change from 0 to 8
[    8.541933] rfkill: input handler disabled
[    9.787480] r8169 0000:09:00.0 enp9s0: Link is Up - 1Gbps/Full - flow control rx/tx
[    9.787498] IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready
[   10.392628] retire_capture_urb: 1299 callbacks suppressed
[   11.904437] vboxdrv: loading out-of-tree module taints kernel.
[   11.904694] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   11.908337] vboxdrv: Found 4 processor cores
[   11.928685] vboxdrv: TSC mode is Invariant, tentative frequency 3593221203 Hz
[   11.928690] vboxdrv: Successfully loaded version 6.1.18_Ubuntu (interface 0x00300000)
[   11.935355] VBoxNetFlt: Successfully started.
[   11.939763] VBoxNetAdp: Successfully started.

Le reste :

 cat /var/log/syslog | grep error
May 17 13:51:24 gerard systemd[1]: Condition check resulted in Process error reports when automatic reporting is enabled (file watch) being skipped.
May 17 13:51:24 gerard kernel: [    0.549846] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 17 13:51:24 gerard kernel: [    4.425634] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 17 13:51:24 gerard kernel: [    5.396277] kfd kfd: error getting iommu info. is the iommu enabled?
May 17 13:51:24 gerard kernel: [    5.396712] kfd kfd: device 1002:15d8 NOT added due to errors
May 17 13:51:24 gerard alsactl[755]: alsa-lib parser.c:260:(error_node) UCM is not supported for this HDA model (HD-Audio Generic at 0xfcc88000 irq 65)
May 17 13:51:24 gerard alsactl[755]: alsa-lib main.c:1014:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -6
May 17 13:51:24 gerard alsactl[755]: alsa-lib main.c:1014:(snd_use_case_mgr_open) error: failed to import hw:1 use case configuration -2
May 17 13:51:24 gerard alsactl[755]: alsa-lib parser.c:260:(error_node) UCM is not supported for this HDA model (HD-Audio Generic at 0xfcc80000 irq 66)
May 17 13:51:24 gerard alsactl[755]: alsa-lib main.c:1014:(snd_use_case_mgr_open) error: failed to import hw:2 use case configuration -6
May 17 14:30:31 gerard gnome-shell[1006]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
May 17 16:40:50 gerard gnome-shell[1006]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 15ms, your system is too slow
May 17 16:40:55 gerard gnome-shell[12351]: libva error: vaGetDriverNameByIndex() failed with unknown libva error, driver_name = (null)
May 17 16:41:16 gerard gnome-shell[1006]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 33ms, your system is too slow
May 17 16:42:35 gerard gnome-shell[12351]: Fontconfig error: Cannot load default config file: No such file: (null)
May 17 16:48:19 gerard gnome-shell[1006]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 11ms, your system is too slow
May 17 19:18:58 gerard gnome-shell[1006]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
May 17 19:21:11 gerard gnome-shell[1006]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 21ms, your system is too slow
May 17 19:23:30 gerard gnome-shell[1006]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 27ms, your system is too slow
May 17 19:23:47 gerard shotwell.desktop[16392]: L 16392 2021-05-17 19:23:47 [CRT] XMP Toolkit error 203: Duplicate property or field node
May 17 19:23:47 gerard shotwell.desktop[16392]: L 16392 2021-05-17 19:23:47 [CRT] XMP Toolkit error 203: Duplicate property or field node
May 17 19:23:48 gerard shotwell.desktop[16392]: L 16392 2021-05-17 19:23:48 [CRT] XMP Toolkit error 203: Duplicate property or field node
May 17 19:23:48 gerard shotwell.desktop[16392]: L 16392 2021-05-17 19:23:48 [CRT] XMP Toolkit error 203: Duplicate property or field node
May 17 19:23:49 gerard shotwell.desktop[16392]: L 16392 2021-05-17 19:23:49 [CRT] XMP Toolkit error 203: Duplicate property or field node
May 17 19:23:49 gerard shotwell.desktop[16392]: message repeated 2 times: [ L 16392 2021-05-17 19:23:49 [CRT] XMP Toolkit error 203: Duplicate property or field node]
May 17 19:23:50 gerard shotwell.desktop[16392]: L 16392 2021-05-17 19:23:50 [CRT] XMP Toolkit error 203: Duplicate property or field node
May 17 19:23:50 gerard shotwell.desktop[16392]: message repeated 2 times: [ L 16392 2021-05-17 19:23:50 [CRT] XMP Toolkit error 203: Duplicate property or field node]
May 17 19:24:15 gerard shotwell.desktop[16392]: L 16392 2021-05-17 19:24:15 [CRT] XMP Toolkit error 203: Duplicate property or field node
May 17 19:24:15 gerard shotwell.desktop[16392]: message repeated 3 times: [ L 16392 2021-05-17 19:24:15 [CRT] XMP Toolkit error 203: Duplicate property or field node]
May 17 19:24:16 gerard gnome-shell[1006]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
May 17 19:33:06 gerard thunderbird.desktop[16509]: JavaScript error: chrome://chat/content/conversation-browser.js, line 853: NotSupportedError: CustomElementRegistry.define: 'conversation-browser' has already been defined as a custom element
May 17 19:34:44 gerard gnome-shell[1006]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 24ms, your system is too slow
May 17 19:34:44 gerard gnome-shell[1006]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 17 19:58:44 gerard gnome-shell[16676]: libva error: vaGetDriverNameByIndex() failed with unknown libva error, driver_name = (null)
May 17 19:58:57 gerard gnome-shell[16676]: Fontconfig error: Cannot load default config file: No such file: (null)
May 17 21:00:34 gerard thunderbird.desktop[17852]: libva error: vaGetDriverNameByIndex() failed with unknown libva error, driver_name = (null)
May 17 21:00:34 gerard gnome-shell[1006]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 13ms, your system is too slow
May 17 21:00:43 gerard gnome-shell[1006]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 20ms, your system is too slow
May 17 21:03:49 gerard thunderbird.desktop[18197]: libva error: vaGetDriverNameByIndex() failed with unknown libva error, driver_name = (null)
May 17 21:04:06 gerard thunderbird.desktop[18498]: libva error: vaGetDriverNameByIndex() failed with unknown libva error, driver_name = (null)
May 17 21:04:34 gerard thunderbird.desktop[18800]: libva error: vaGetDriverNameByIndex() failed with unknown libva error, driver_name = (null)
May 17 21:05:18 gerard snap-store[10606]: internal error: failed, but no error code: cancelled
May 17 21:05:50 gerard gnome-shell[1006]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
May 17 21:17:19 gerard gnome-shell[1006]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 13ms, your system is too slow
May 17 21:17:20 gerard gnome-shell[19996]: libva error: vaGetDriverNameByIndex() failed with unknown libva error, driver_name = (null)
May 17 21:17:22 gerard gnome-shell[1006]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
May 17 21:17:22 gerard gnome-shell[1006]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 17 21:17:24 gerard gnome-shell[19996]: Fontconfig error: Cannot load default config file: No such file: (null)
May 17 21:43:38 gerard whoopsie[1660]: [21:43:38] Sent; server replied with: No error
May 17 21:44:31 gerard gnome-shell[21841]: libva error: vaGetDriverNameByIndex() failed with unknown libva error, driver_name = (null)
May 17 21:44:37 gerard gnome-shell[21841]: Fontconfig error: Cannot load default config file: No such file: (null)
May 17 21:46:01 gerard gnome-shell[21841]: Fontconfig error: Cannot load default config file: No such file: (null)
May 17 21:53:34 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 17 21:53:34 gerard kernel: [    0.556895] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 17 21:53:34 gerard kernel: [    4.392197] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 17 21:53:34 gerard kernel: [    5.277410] kfd kfd: error getting iommu info. is the iommu enabled?
May 17 21:53:34 gerard kernel: [    5.277994] kfd kfd: device 1002:15d8 NOT added due to errors
May 17 21:53:40 gerard snap-store[1373]: not handling error no-network for action refresh: Cannot refresh cache whilst offline
May 17 21:53:40 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 17 21:53:47 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 17 21:53:47 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 17 21:53:47 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 17 21:53:47 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 17 21:53:47 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 17 21:53:47 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 17 21:53:47 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 17 21:53:47 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 17 21:53:47 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 17 21:53:47 gerard systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
May 17 21:53:48 gerard whoopsie[1683]: [21:53:48] Sent; server replied with: No error
May 17 21:53:50 gerard gnome-shell[979]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 15ms, your system is too slow
May 17 22:01:02 gerard gnome-shell[3257]: Fontconfig error: Cannot load default config file: No such file: (null)
May 17 22:04:19 gerard gnome-shell[3257]: [3290:3306:0517/220419.031666:ERROR:ssl_client_socket_impl.cc(947)] handshake failed; returned -1, SSL error code 1, net_error -107
May 17 22:04:19 gerard gnome-shell[3257]: [3290:3306:0517/220419.034665:ERROR:ssl_client_socket_impl.cc(947)] handshake failed; returned -1, SSL error code 1, net_error -107
May 17 22:04:20 gerard gnome-shell[3257]: [3290:3306:0517/220420.564876:ERROR:ssl_client_socket_impl.cc(947)] handshake failed; returned -1, SSL error code 1, net_error -107
May 17 22:09:31 gerard gnome-shell[979]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 12ms, your system is too slow
May 17 22:11:56 gerard gnome-shell[979]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 19ms, your system is too slow
May 17 22:12:26 gerard gnome-shell[979]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 28ms, your system is too slow
May 17 22:16:08 gerard gnome-shell[979]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 14ms, your system is too slow
May 17 22:16:08 gerard gnome-shell[979]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 17 22:18:59 gerard gnome-shell[8894]: Fontconfig error: Cannot load default config file: No such file: (null)
May 17 22:21:18 gerard com.ulduzsoft.Birdtray.desktop[2428]: ICE default IO error handler doing an exit(), pid = 2428, errno = 32
May 18 06:31:26 gerard kernel: [    0.576417] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 18 06:31:26 gerard kernel: [    4.404138] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 18 06:31:26 gerard kernel: [    5.349550] kfd kfd: error getting iommu info. is the iommu enabled?
May 18 06:31:26 gerard kernel: [    5.349836] kfd kfd: device 1002:15d8 NOT added due to errors
May 18 06:31:26 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 18 06:31:27 gerard systemd-xdg-autostart-generator[827]: Not generating service for XDG autostart app-org.gnome.DejaDup.Monitor-autostart.service, error parsing Exec= line: No such file or directory
May 18 06:31:32 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 06:31:33 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 06:31:39 gerard snap-store[1347]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 18 06:31:41 gerard snap-store[1347]: internal error: failed, but no error code: cancelled-priority
May 18 06:31:43 gerard snap-store[1347]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 18 06:31:44 gerard snap-store[1347]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 18 06:31:45 gerard snap-store[1347]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 18 06:36:59 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 14ms, your system is too slow
May 18 06:37:16 gerard gnome-shell[8339]: Fontconfig error: Cannot load default config file: No such file: (null)
May 18 06:54:51 gerard gnome-shell[8754]: Fontconfig error: Cannot load default config file: No such file: (null)
May 18 06:58:37 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 12ms, your system is too slow
May 18 07:01:04 gerard gnome-shell[8754]: Fontconfig error: Cannot load default config file: No such file: (null)
May 18 07:23:39 gerard gnome-shell[9450]: Fontconfig error: Cannot load default config file: No such file: (null)
May 18 07:38:59 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 27ms, your system is too slow
May 18 07:39:12 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 15ms, your system is too slow
May 18 07:46:09 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 35ms, your system is too slow
May 18 08:31:59 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 20ms, your system is too slow
May 18 08:33:19 gerard gnome-shell[1016]: libinput error: client bug: timer event6 debounce short: scheduled expiry is in the past (-3ms), your system is too slow
May 18 08:49:09 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 13ms, your system is too slow
May 18 09:13:52 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 16ms, your system is too slow
May 18 09:15:03 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 09:15:04 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
May 18 09:15:08 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 09:15:08 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 09:15:08 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 09:15:08 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 09:15:08 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 09:15:08 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 09:15:08 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 09:15:08 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 09:15:08 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 09:15:08 gerard systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
May 18 09:15:08 gerard whoopsie[1681]: [09:15:08] Sent; server replied with: No error
May 18 09:15:09 gerard whoopsie[1681]: [09:15:09] Sent; server replied with: No error
May 18 09:15:12 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 28ms, your system is too slow
May 18 09:15:40 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 27ms, your system is too slow
May 18 09:15:40 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 18 09:37:26 gerard gnome-shell[13539]: Fontconfig error: Cannot load default config file: No such file: (null)
May 18 12:04:34 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 19ms, your system is too slow
May 18 12:04:34 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 26ms, your system is too slow
May 18 12:05:00 gerard gnome-shell[1016]: libinput error: client bug: timer event6 debounce short: scheduled expiry is in the past (-12ms), your system is too slow
May 18 12:05:00 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 17ms, your system is too slow
May 18 12:05:09 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 16ms, your system is too slow
May 18 12:05:27 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 24ms, your system is too slow
May 18 12:05:27 gerard gnome-shell[1016]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 18 12:07:53 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 18 12:07:53 gerard kernel: [    0.565614] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 18 12:07:53 gerard kernel: [    4.414553] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 18 12:07:53 gerard kernel: [    5.322208] kfd kfd: error getting iommu info. is the iommu enabled?
May 18 12:07:53 gerard kernel: [    5.322682] kfd kfd: device 1002:15d8 NOT added due to errors
May 18 12:07:54 gerard systemd-xdg-autostart-generator[809]: Not generating service for XDG autostart app-org.gnome.DejaDup.Monitor-autostart.service, error parsing Exec= line: No such file or directory
May 18 12:07:59 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 12:08:06 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 12:08:06 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 12:08:06 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 12:08:06 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 12:08:07 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 12:08:07 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 12:08:07 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 12:08:07 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 12:08:07 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 12:08:07 gerard systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
May 18 12:08:07 gerard whoopsie[1671]: [12:08:07] Sent; server replied with: No error
May 18 12:08:55 gerard gnome-shell[3035]: Fontconfig error: Cannot load default config file: No such file: (null)
May 18 12:14:36 gerard gnome-shell[987]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 21ms, your system is too slow
May 18 12:19:35 gerard gnome-shell[987]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 14ms, your system is too slow
May 18 12:32:11 gerard gnome-shell[987]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 19ms, your system is too slow
May 18 12:33:42 gerard gnome-shell[4767]: Fontconfig error: Cannot load default config file: No such file: (null)
May 18 12:38:46 gerard gnome-shell[987]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 37ms, your system is too slow
May 18 12:41:30 gerard gnome-shell[987]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 38ms, your system is too slow
May 18 12:41:49 gerard gnome-shell[5846]: Fontconfig error: Cannot load default config file: No such file: (null)
May 18 12:43:30 gerard gnome-shell[987]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 32ms, your system is too slow
May 18 12:43:30 gerard gnome-shell[987]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 18 12:45:02 gerard gnome-shell[5846]: Fontconfig error: Cannot load default config file: No such file: (null)
May 18 12:47:07 gerard gnome-shell[987]: libinput error: client bug: timer event6 debounce: scheduled expiry is in the past (-1ms), your system is too slow
May 18 12:52:15 gerard snap-store[1317]: internal error: failed, but no error code: cancelled
May 18 12:52:15 gerard snap-store[1317]: not GsPlugin error snapd-error-quark:1: Failed to write to snapd: L’opération a été annulée
May 18 12:52:15 gerard snap-store[1317]: not handling error failed for action refine: Failed to write to snapd: L’opération a été annulée
May 18 12:52:16 gerard snap-store[1317]: internal error: failed, but no error code: cancelled
May 18 12:52:16 gerard snap-store[1317]: not GsPlugin error snapd-error-quark:1: Failed to write to snapd: L’opération a été annulée
May 18 12:52:16 gerard snap-store[1317]: not handling error failed for action refine: Failed to write to snapd: L’opération a été annulée
May 18 12:52:16 gerard snap-store[1317]: not GsPlugin error snapd-error-quark:1: Failed to write to snapd: L’opération a été annulée
May 18 12:52:16 gerard snap-store[1317]: not handling error failed for action refine: Failed to write to snapd: L’opération a été annulée
May 18 12:54:24 gerard kernel: [    0.562416] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 18 12:54:24 gerard kernel: [    4.360198] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 18 12:54:24 gerard kernel: [    5.317125] kfd kfd: error getting iommu info. is the iommu enabled?
May 18 12:54:24 gerard kernel: [    5.317481] kfd kfd: device 1002:15d8 NOT added due to errors
May 18 12:54:24 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 18 12:54:25 gerard systemd-xdg-autostart-generator[878]: Not generating service for XDG autostart app-org.gnome.DejaDup.Monitor-autostart.service, error parsing Exec= line: No such file or directory
May 18 12:54:30 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 12:54:30 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 13:09:15 gerard gnome-shell[2460]: syntax error: line 1 of stdin
May 18 13:20:08 gerard gnome-shell[2552]: Fontconfig error: Cannot load default config file: No such file: (null)
May 18 13:20:12 gerard gnome-shell[1050]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 14ms, your system is too slow
May 18 13:20:22 gerard gnome-shell[2552]: Fontconfig error: Cannot load default config file: No such file: (null)
May 18 15:44:30 gerard gnome-shell[1050]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 12ms, your system is too slow
May 18 15:44:41 gerard gnome-shell[1050]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 58ms, your system is too slow
May 18 15:46:38 gerard gnome-shell[1050]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 13ms, your system is too slow
May 18 15:47:19 gerard gnome-shell[4502]: Fontconfig error: Cannot load default config file: No such file: (null)
May 18 15:47:22 gerard gnome-shell[1050]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 15ms, your system is too slow
May 18 15:47:38 gerard gnome-shell[1050]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 12ms, your system is too slow
May 18 15:47:38 gerard gnome-shell[1050]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 18 15:47:54 gerard gnome-shell[1050]: libinput error: client bug: timer event6 debounce: scheduled expiry is in the past (-68ms), your system is too slow
May 18 15:56:35 gerard gnome-shell[1050]: libinput error: client bug: timer event6 debounce: scheduled expiry is in the past (-21ms), your system is too slow
May 18 15:58:02 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 18 15:58:02 gerard kernel: [    0.564395] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 18 15:58:02 gerard kernel: [    4.424048] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 18 15:58:02 gerard kernel: [    5.297994] kfd kfd: error getting iommu info. is the iommu enabled?
May 18 15:58:02 gerard kernel: [    5.298316] kfd kfd: device 1002:15d8 NOT added due to errors
May 18 15:58:03 gerard systemd-xdg-autostart-generator[878]: Not generating service for XDG autostart app-org.gnome.DejaDup.Monitor-autostart.service, error parsing Exec= line: No such file or directory
May 18 15:58:08 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 15:58:16 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 15:58:16 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 15:58:16 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 15:58:16 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 15:58:16 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 15:58:16 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 15:58:16 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 15:58:16 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 15:58:16 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 15:58:16 gerard systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
May 18 15:58:16 gerard whoopsie[1750]: [15:58:16] Sent; server replied with: No error
May 18 15:58:25 gerard gnome-shell[1055]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 13ms, your system is too slow
May 18 16:03:54 gerard gnome-shell[1055]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 31ms, your system is too slow
May 18 16:03:56 gerard gnome-shell[1055]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 15ms, your system is too slow
May 18 16:06:20 gerard gnome-shell[1055]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _checkGC@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/iconCache.js:110:1#012  add@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/iconCache.js:62:14#012  _cacheOrCreateIconByName@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:452:37#012  async*_updateIconByType@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:702:36#012  _updateIcon@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:731:14#012  _invalidateIcon@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:755:14#012  _init/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:401:18#012  _emit@resource:///org/gnome/gjs/modules/core/_signals.js:114:47#012  _checkIfReady@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:124:18#012  _onPropertiesChanged/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:315:27#012  _onPropertiesChanged@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:289:15
May 18 16:06:20 gerard gnome-shell[1055]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  enable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:58:5#012  _callExtensionEnable@resource:///org/gnome/shell/ui/extensionSystem.js:168:32#012  loadExtension@resource:///org/gnome/shell/ui/extensionSystem.js:351:26#012  _loadExtensions/<@resource:///org/gnome/shell/ui/extensionSystem.js:597:18#012  collectFromDatadirs@resource:///org/gnome/shell/misc/fileUtils.js:27:28#012  _loadExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:572:19#012  _enableAllExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:606:18#012  _sessionUpdated@resource:///org/gnome/shell/ui/extensionSystem.js:637:18#012  init@resource:///org/gnome/shell/ui/extensionSystem.js:57:14#012  _initializeUI@resource:///org/gnome/shell/ui/main.js:272:22#012  start@resource:///org/gnome/shell/ui/main.js:162:5#012  @<main>:1:47
May 18 16:06:20 gerard gnome-shell[1055]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  enable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:58:5#012  _callExtensionEnable@resource:///org/gnome/shell/ui/extensionSystem.js:168:32#012  loadExtension@resource:///org/gnome/shell/ui/extensionSystem.js:351:26#012  _loadExtensions/<@resource:///org/gnome/shell/ui/extensionSystem.js:597:18#012  collectFromDatadirs@resource:///org/gnome/shell/misc/fileUtils.js:27:28#012  _loadExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:572:19#012  _enableAllExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:606:18#012  _sessionUpdated@resource:///org/gnome/shell/ui/extensionSystem.js:637:18#012  init@resource:///org/gnome/shell/ui/extensionSystem.js:57:14#012  _initializeUI@resource:///org/gnome/shell/ui/main.js:272:22#012  start@resource:///org/gnome/shell/ui/main.js:162:5#012  @<main>:1:47
May 18 20:06:15 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 18 20:06:15 gerard kernel: [    0.576035] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 18 20:06:15 gerard kernel: [    4.438511] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 18 20:06:15 gerard kernel: [    5.310108] kfd kfd: error getting iommu info. is the iommu enabled?
May 18 20:06:15 gerard kernel: [    5.310400] kfd kfd: device 1002:15d8 NOT added due to errors
May 18 20:06:16 gerard systemd-xdg-autostart-generator[881]: Not generating service for XDG autostart app-org.gnome.DejaDup.Monitor-autostart.service, error parsing Exec= line: No such file or directory
May 18 20:06:21 gerard snap-store[1413]: not handling error no-network for action refresh: Cannot refresh cache whilst offline
May 18 20:06:21 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 20:06:28 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 20:06:28 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 20:06:28 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 20:06:28 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 20:06:28 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 20:06:28 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 20:06:28 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 20:06:28 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 18 20:06:28 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 18 20:06:28 gerard systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
May 18 20:06:29 gerard whoopsie[1747]: [20:06:29] Sent; server replied with: No error
May 18 20:16:58 gerard gnome-shell[1050]: libinput error: client bug: timer event6 debounce short: scheduled expiry is in the past (-2ms), your system is too slow
May 18 20:17:18 gerard gnome-shell[1050]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 29ms, your system is too slow
May 18 20:18:18 gerard gnome-shell[1050]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 13ms, your system is too slow
May 18 20:24:16 gerard gnome-shell[1050]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 13ms, your system is too slow
May 18 20:25:20 gerard gnome-shell[3425]: Fontconfig error: Cannot load default config file: No such file: (null)
May 18 20:28:17 gerard gnome-shell[1050]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 15ms, your system is too slow
May 18 21:26:55 gerard gnome-shell[4051]: Fontconfig error: Cannot load default config file: No such file: (null)
May 18 21:33:23 gerard gnome-shell[1050]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 35ms, your system is too slow
May 18 21:36:37 gerard gnome-shell[1050]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 28ms, your system is too slow
May 18 21:37:48 gerard gnome-shell[1050]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 37ms, your system is too slow
May 18 21:37:54 gerard gnome-shell[1050]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 21ms, your system is too slow
May 18 21:37:58 gerard gnome-shell[1050]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 21ms, your system is too slow
May 18 21:44:26 gerard gnome-shell[4873]: Fontconfig error: Cannot load default config file: No such file: (null)
May 18 21:45:05 gerard gnome-shell[1050]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 54ms, your system is too slow
May 18 21:45:05 gerard gnome-shell[1050]: libinput error: event3  - Logitech USB Keyboard: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 18 22:01:06 gerard gnome-shell[1050]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _checkGC@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/iconCache.js:110:1#012  add@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/iconCache.js:62:14#012  _cacheOrCreateIconByName@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:452:37#012  async*_updateIconByType@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:702:36#012  _updateIcon@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:731:14#012  _invalidateIcon@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:755:14#012  _init/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:401:18#012  _emit@resource:///org/gnome/gjs/modules/core/_signals.js:114:47#012  _checkIfReady@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:124:18#012  _onPropertiesChanged/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:315:27#012  _onPropertiesChanged@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:289:15
May 18 22:01:06 gerard gnome-shell[1050]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  enable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:58:5#012  _callExtensionEnable@resource:///org/gnome/shell/ui/extensionSystem.js:168:32#012  loadExtension@resource:///org/gnome/shell/ui/extensionSystem.js:351:26#012  _loadExtensions/<@resource:///org/gnome/shell/ui/extensionSystem.js:597:18#012  collectFromDatadirs@resource:///org/gnome/shell/misc/fileUtils.js:27:28#012  _loadExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:572:19#012  _enableAllExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:606:18#012  _sessionUpdated@resource:///org/gnome/shell/ui/extensionSystem.js:637:18#012  init@resource:///org/gnome/shell/ui/extensionSystem.js:57:14#012  _initializeUI@resource:///org/gnome/shell/ui/main.js:272:22#012  start@resource:///org/gnome/shell/ui/main.js:162:5#012  @<main>:1:47
May 18 22:01:06 gerard gnome-shell[1050]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  enable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:58:5#012  _callExtensionEnable@resource:///org/gnome/shell/ui/extensionSystem.js:168:32#012  loadExtension@resource:///org/gnome/shell/ui/extensionSystem.js:351:26#012  _loadExtensions/<@resource:///org/gnome/shell/ui/extensionSystem.js:597:18#012  collectFromDatadirs@resource:///org/gnome/shell/misc/fileUtils.js:27:28#012  _loadExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:572:19#012  _enableAllExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:606:18#012  _sessionUpdated@resource:///org/gnome/shell/ui/extensionSystem.js:637:18#012  init@resource:///org/gnome/shell/ui/extensionSystem.js:57:14#012  _initializeUI@resource:///org/gnome/shell/ui/main.js:272:22#012  start@resource:///org/gnome/shell/ui/main.js:162:5#012  @<main>:1:47
May 19 06:38:51 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 19 06:38:51 gerard kernel: [    0.564279] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 19 06:38:51 gerard kernel: [    4.391388] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 19 06:38:51 gerard kernel: [    5.372980] kfd kfd: error getting iommu info. is the iommu enabled?
May 19 06:38:51 gerard kernel: [    5.373349] kfd kfd: device 1002:15d8 NOT added due to errors
May 19 06:38:52 gerard systemd-xdg-autostart-generator[891]: Not generating service for XDG autostart app-org.gnome.DejaDup.Monitor-autostart.service, error parsing Exec= line: No such file or directory
May 19 06:38:57 gerard snap-store[1423]: not handling error download-failed for action refresh: failed to download https://cdn.fwupd.org/downloads/firmware.xml.gz.jcat: Cannot resolve hostname
May 19 06:38:57 gerard snap-store[1423]: not handling error download-failed for action refresh: failed to download https://cdn.fwupd.org/downloads/firmware.xml.gz.jcat: Cannot resolve hostname
May 19 06:38:57 gerard snap-store[1423]: not handling error download-failed for action refresh: failed to download https://cdn.fwupd.org/downloads/firmware.xml.gz.jcat: Cannot resolve hostname
May 19 06:38:57 gerard snap-store[1423]: not handling error download-failed for action refresh: failed to download https://cdn.fwupd.org/downloads/firmware.xml.gz.jcat: Cannot resolve hostname
May 19 06:38:57 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 19 06:38:58 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 19 06:39:04 gerard snap-store[1423]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 19 06:39:06 gerard snap-store[1423]: internal error: failed, but no error code: cancelled-priority
May 19 06:39:07 gerard snap-store[1423]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 19 06:39:09 gerard snap-store[1423]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 19 06:39:10 gerard snap-store[1423]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 19 06:51:07 gerard gnome-shell[1086]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 17ms, your system is too slow
May 19 06:52:10 gerard gnome-shell[4567]: Fontconfig error: Cannot load default config file: No such file: (null)
May 19 09:35:39 gerard gnome-shell[1086]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 13ms, your system is too slow
May 19 09:35:48 gerard gnome-shell[1086]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 12ms, your system is too slow
May 19 09:36:48 gerard gnome-shell[1086]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 96ms, your system is too slow
May 19 09:37:28 gerard gnome-shell[1086]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 17ms, your system is too slow
May 19 09:37:45 gerard gnome-shell[1086]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 14ms, your system is too slow
May 19 09:37:45 gerard gnome-shell[1086]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 19 09:38:00 gerard gnome-shell[1086]: libinput error: client bug: timer event6 debounce short: scheduled expiry is in the past (-1ms), your system is too slow
May 19 09:39:39 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 19 09:39:39 gerard kernel: [    0.579494] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 19 09:39:39 gerard kernel: [    4.436449] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 19 09:39:39 gerard kernel: [    5.343319] kfd kfd: error getting iommu info. is the iommu enabled?
May 19 09:39:39 gerard kernel: [    5.343753] kfd kfd: device 1002:15d8 NOT added due to errors
May 19 09:39:40 gerard systemd-xdg-autostart-generator[878]: Not generating service for XDG autostart app-org.gnome.DejaDup.Monitor-autostart.service, error parsing Exec= line: No such file or directory
May 19 09:39:45 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 19 09:39:53 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 19 09:39:53 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 19 09:39:53 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 19 09:39:53 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 19 09:39:53 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 19 09:39:53 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 19 09:39:53 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 19 09:39:53 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 19 09:39:53 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 19 09:39:53 gerard systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
May 19 09:39:54 gerard whoopsie[1759]: [09:39:54] Sent; server replied with: No error
May 19 11:08:12 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 17ms, your system is too slow
May 19 11:08:40 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 15ms, your system is too slow
May 19 11:08:40 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 16ms, your system is too slow
May 19 11:08:43 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
May 19 11:08:46 gerard gnome-shell[3960]: Fontconfig error: Cannot load default config file: No such file: (null)
May 19 11:08:48 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
May 19 11:08:48 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 19 18:44:18 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 39ms, your system is too slow
May 19 18:44:18 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 37ms, your system is too slow
May 19 18:44:20 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 22ms, your system is too slow
May 19 18:44:20 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 13ms, your system is too slow
May 19 18:44:21 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 18ms, your system is too slow
May 19 18:44:21 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 19 18:44:50 gerard gnome-shell[1061]: libinput error: client bug: timer event6 debounce short: scheduled expiry is in the past (-8ms), your system is too slow
May 19 18:44:55 gerard gnome-shell[1061]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 14ms, your system is too slow
May 19 18:45:13 gerard gnome-shell[1061]: libinput error: client bug: timer event6 debounce short: scheduled expiry is in the past (-8ms), your system is too slow
May 19 18:45:40 gerard gnome-shell[1061]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 11ms, your system is too slow
May 19 18:45:41 gerard gnome-shell[1061]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 12ms, your system is too slow
May 19 18:46:10 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 19 18:46:10 gerard kernel: [    0.550728] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 19 18:46:10 gerard kernel: [    4.408997] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 19 18:46:10 gerard kernel: [    5.347513] kfd kfd: error getting iommu info. is the iommu enabled?
May 19 18:46:10 gerard kernel: [    5.347932] kfd kfd: device 1002:15d8 NOT added due to errors
May 19 18:46:11 gerard systemd-xdg-autostart-generator[872]: Not generating service for XDG autostart app-org.gnome.DejaDup.Monitor-autostart.service, error parsing Exec= line: No such file or directory
May 19 18:46:16 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 19 18:46:16 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 19 18:46:29 gerard gnome-shell[1045]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 20ms, your system is too slow
May 19 18:49:02 gerard gnome-shell[1045]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 17ms, your system is too slow
May 19 18:49:12 gerard gnome-shell[1045]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 19ms, your system is too slow
May 19 18:53:35 gerard gnome-shell[1045]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 42ms, your system is too slow
May 19 18:55:21 gerard gnome-shell[2287]: Fontconfig error: Cannot load default config file: No such file: (null)
May 19 18:55:25 gerard gnome-shell[1045]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 76ms, your system is too slow
May 19 18:55:49 gerard gnome-shell[2287]: Fontconfig error: Cannot load default config file: No such file: (null)
May 19 19:06:22 gerard gnome-shell[1045]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 11ms, your system is too slow
May 19 20:04:42 gerard gnome-shell[1045]: libinput error: client bug: timer event6 debounce: scheduled expiry is in the past (-7ms), your system is too slow
May 19 20:04:42 gerard gnome-shell[1045]: libinput error: client bug: timer event6 debounce short: scheduled expiry is in the past (-20ms), your system is too slow
May 19 20:04:49 gerard gnome-shell[1045]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 34ms, your system is too slow
May 19 20:04:52 gerard gnome-shell[1045]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 28ms, your system is too slow
May 19 20:29:45 gerard gnome-shell[1045]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
May 19 20:29:47 gerard gnome-shell[1045]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
May 19 20:30:32 gerard gnome-shell[1045]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 76ms, your system is too slow
May 19 20:30:32 gerard gnome-shell[1045]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 19 20:31:27 gerard gnome-shell[1045]: libinput error: client bug: timer event6 debounce: scheduled expiry is in the past (-51ms), your system is too slow
May 19 20:31:27 gerard gnome-shell[1045]: libinput error: client bug: timer event6 debounce short: scheduled expiry is in the past (-65ms), your system is too slow
May 19 20:32:43 gerard gnome-shell[7391]: Fontconfig error: Cannot load default config file: No such file: (null)
May 19 20:50:18 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 19 20:50:18 gerard kernel: [    0.553528] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 19 20:50:18 gerard kernel: [    4.463869] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 19 20:50:18 gerard kernel: [    5.373290] kfd kfd: error getting iommu info. is the iommu enabled?
May 19 20:50:18 gerard kernel: [    5.373667] kfd kfd: device 1002:15d8 NOT added due to errors
May 19 20:50:19 gerard systemd-xdg-autostart-generator[876]: Not generating service for XDG autostart app-org.gnome.DejaDup.Monitor-autostart.service, error parsing Exec= line: No such file or directory
May 19 20:50:24 gerard snap-store[1368]: not handling error no-network for action refresh: Cannot refresh cache whilst offline
May 19 20:52:16 gerard gnome-shell[1037]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 15ms, your system is too slow
May 19 20:52:43 gerard gnome-shell[2017]: Fontconfig error: Cannot load default config file: No such file: (null)
May 19 20:55:32 gerard gnome-shell[1037]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 13ms, your system is too slow
May 19 20:55:36 gerard gnome-shell[1037]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 12ms, your system is too slow
May 19 20:56:01 gerard gnome-shell[1037]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 12ms, your system is too slow
May 19 20:56:36 gerard gnome-shell[1037]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 23ms, your system is too slow
May 19 21:14:56 gerard gnome-shell[1037]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 25ms, your system is too slow
May 19 21:18:59 gerard gnome-shell[3622]: Fontconfig error: Cannot load default config file: No such file: (null)
May 19 21:21:06 gerard gnome-shell[1037]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 13ms, your system is too slow
May 19 21:21:06 gerard gnome-shell[1037]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 19 21:23:49 gerard gnome-shell[3622]: Fontconfig error: Cannot load default config file: No such file: (null)
May 19 21:24:46 gerard gnome-shell[3622]: Fontconfig error: Cannot load default config file: No such file: (null)
May 19 21:30:57 gerard gnome-shell[1037]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 21ms, your system is too slow
May 19 21:37:45 gerard gnome-shell[4595]: Fontconfig error: Cannot load default config file: No such file: (null)
May 19 21:47:06 gerard gnome-shell[1037]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  enable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:58:5#012  _callExtensionEnable@resource:///org/gnome/shell/ui/extensionSystem.js:168:32#012  _onEnabledExtensionsChanged/<@resource:///org/gnome/shell/ui/extensionSystem.js:498:35#012  _onEnabledExtensionsChanged@resource:///org/gnome/shell/ui/extensionSystem.js:498:14#012  createCheckedMethod/<@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:516:46#012  enableExtension@resource:///org/gnome/shell/ui/extensionSystem.js:190:29#012  EnableExtension@resource:///org/gnome/shell/ui/shellDBus.js:307:38#012  _handleMethodCall@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:310:38#012  _wrapJSObject/<@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:387:34
May 19 21:47:06 gerard gnome-shell[1037]: message repeated 6 times: [ Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  enable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/ext]
May 19 21:47:06 gerard gnome-shell[1037]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _checkGC@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/iconCache.js:110:1#012  add@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/iconCache.js:62:14#012  _cacheOrCreateIconByName@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:452:37#012  async*_updateIconByType@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:702:36#012  _updateIcon@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:731:14#012  _invalidateIcon@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:755:14#012  _init@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:407:18#012  _init@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/indicatorStatusIcon.js:44:25#012  _registerItem@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:102:32#012  async*_ensureItemRegistered@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:127:14#012  RegisterStatusNotifierItemAsync@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:185:14#012  _handleMethodCall@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:354:35#012  _wrapJSObject/<@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:387:34
May 19 21:47:06 gerard gnome-shell[1037]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  enable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:58:5#012  _callExtensionEnable@resource:///org/gnome/shell/ui/extensionSystem.js:168:32#012  _onEnabledExtensionsChanged/<@resource:///org/gnome/shell/ui/extensionSystem.js:498:35#012  _onEnabledExtensionsChanged@resource:///org/gnome/shell/ui/extensionSystem.js:498:14#012  createCheckedMethod/<@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:516:46#012  enableExtension@resource:///org/gnome/shell/ui/extensionSystem.js:190:29#012  EnableExtension@resource:///org/gnome/shell/ui/shellDBus.js:307:38#012  _handleMethodCall@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:310:38#012  _wrapJSObject/<@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:387:34
May 19 21:47:06 gerard gnome-shell[1037]: message repeated 4 times: [ Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  enable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/ext]
May 19 21:47:06 gerard gnome-shell[1037]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _checkGC@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/iconCache.js:110:1#012  add@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/iconCache.js:62:14#012  _cacheOrCreateIconByName@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:452:37#012  async*_updateIconByType@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:702:36#012  _updateIcon@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:731:14#012  _invalidateIcon@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:755:14#012  _emit@resource:///org/gnome/gjs/modules/core/_signals.js:114:47#012  reset@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:328:14#012  _ensureItemRegistered@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:123:18#012  RegisterStatusNotifierItemAsync@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:185:14#012  _handleMethodCall@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:354:35#012  _wrapJSObject/<@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:387:34
May 19 21:47:06 gerard gnome-shell[1037]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  enable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:58:5#012  _callExtensionEnable@resource:///org/gnome/shell/ui/extensionSystem.js:168:32#012  _onEnabledExtensionsChanged/<@resource:///org/gnome/shell/ui/extensionSystem.js:498:35#012  _onEnabledExtensionsChanged@resource:///org/gnome/shell/ui/extensionSystem.js:498:14#012  createCheckedMethod/<@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:516:46#012  enableExtension@resource:///org/gnome/shell/ui/extensionSystem.js:190:29#012  EnableExtension@resource:///org/gnome/shell/ui/shellDBus.js:307:38#012  _handleMethodCall@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:310:38#012  _wrapJSObject/<@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:387:34
May 19 21:47:06 gerard gnome-shell[1037]: message repeated 3 times: [ Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  enable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/ext]
May 20 06:32:47 gerard kernel: [    0.596837] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 20 06:32:47 gerard kernel: [    4.400082] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 20 06:32:47 gerard kernel: [    5.230580] kfd kfd: error getting iommu info. is the iommu enabled?
May 20 06:32:47 gerard kernel: [    5.230974] kfd kfd: device 1002:15d8 NOT added due to errors
May 20 06:32:47 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 20 06:32:48 gerard systemd-xdg-autostart-generator[891]: Not generating service for XDG autostart app-org.gnome.DejaDup.Monitor-autostart.service, error parsing Exec= line: No such file or directory
May 20 06:32:54 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 06:33:00 gerard snap-store[1414]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 20 06:33:02 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 06:33:02 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 06:33:02 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 06:33:02 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 06:33:02 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 06:33:02 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 06:33:02 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 06:33:02 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 06:33:02 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 06:33:02 gerard systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
May 20 06:33:02 gerard snap-store[1414]: internal error: failed, but no error code: cancelled-priority
May 20 06:33:03 gerard whoopsie[1735]: [06:33:03] Sent; server replied with: No error
May 20 06:33:04 gerard snap-store[1414]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 20 06:33:05 gerard snap-store[1414]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 20 06:33:06 gerard snap-store[1414]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 20 06:34:46 gerard gnome-shell[4581]: Fontconfig error: Cannot load default config file: No such file: (null)
May 20 06:58:40 gerard gnome-shell[1096]: libinput error: client bug: timer event6 debounce short: scheduled expiry is in the past (-5ms), your system is too slow
May 20 07:11:20 gerard gnome-shell[1096]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
May 20 07:13:20 gerard gnome-shell[1096]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 25ms, your system is too slow
May 20 08:52:17 gerard gnome-shell[1096]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 12ms, your system is too slow
May 20 08:52:20 gerard gnome-shell[1096]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
May 20 08:52:23 gerard gnome-shell[6657]: Fontconfig error: Cannot load default config file: No such file: (null)
May 20 08:52:24 gerard gnome-shell[1096]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 20ms, your system is too slow
May 20 08:55:18 gerard gnome-shell[1096]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 14ms, your system is too slow
May 20 10:38:52 gerard gnome-shell[1096]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
May 20 10:38:52 gerard gnome-shell[1096]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 14ms, your system is too slow
May 20 10:39:27 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 20 10:39:27 gerard kernel: [    0.464124] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 20 10:39:27 gerard kernel: [    4.280935] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 20 10:39:27 gerard kernel: [    5.150637] kfd kfd: error getting iommu info. is the iommu enabled?
May 20 10:39:27 gerard kernel: [    5.150980] kfd kfd: device 1002:15d8 NOT added due to errors
May 20 10:39:28 gerard systemd-xdg-autostart-generator[884]: Not generating service for XDG autostart app-org.gnome.DejaDup.Monitor-autostart.service, error parsing Exec= line: No such file or directory
May 20 10:39:33 gerard snap-store[1407]: not handling error no-network for action refresh: Cannot refresh cache whilst offline
May 20 10:39:33 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 10:39:40 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 10:39:40 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 10:39:40 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 10:39:40 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 10:39:40 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 10:39:40 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 10:39:40 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 10:39:40 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 10:39:40 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 10:39:40 gerard systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
May 20 10:39:41 gerard whoopsie[1727]: [10:39:41] Sent; server replied with: No error
May 20 10:42:34 gerard gnome-shell[1040]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 38ms, your system is too slow
May 20 10:45:35 gerard gnome-shell[1040]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 13ms, your system is too slow
May 20 10:48:57 gerard gnome-shell[1040]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 20ms, your system is too slow
May 20 12:16:23 gerard gnome-shell[1040]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 17ms, your system is too slow
May 20 12:19:36 gerard gnome-shell[1040]: libinput error: client bug: timer event6 debounce: scheduled expiry is in the past (-25ms), your system is too slow
May 20 12:19:36 gerard gnome-shell[1040]: libinput error: client bug: timer event6 debounce short: scheduled expiry is in the past (-38ms), your system is too slow
May 20 12:21:45 gerard gnome-shell[1040]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 19ms, your system is too slow
May 20 12:21:53 gerard gnome-shell[1040]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 12ms, your system is too slow
May 20 12:22:33 gerard gnome-shell[1040]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
May 20 12:24:24 gerard gnome-shell[1040]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 17ms, your system is too slow
May 20 12:33:42 gerard gnome-shell[1040]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 18ms, your system is too slow
May 20 12:33:42 gerard gnome-shell[1040]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 20 12:35:36 gerard gnome-shell[1040]: libinput error: client bug: timer event6 debounce: scheduled expiry is in the past (-4ms), your system is too slow
May 20 12:42:53 gerard gnome-shell[1040]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 17ms, your system is too slow
May 20 12:43:31 gerard gnome-shell[1040]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 26ms, your system is too slow
May 20 12:46:23 gerard gnome-shell[1040]: libinput error: client bug: timer event6 debounce: scheduled expiry is in the past (-44ms), your system is too slow
May 20 12:48:43 gerard gnome-shell[1040]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 94ms, your system is too slow
May 20 14:43:46 gerard gnome-shell[1040]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 18ms, your system is too slow
May 20 14:43:47 gerard gnome-shell[1040]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 32ms, your system is too slow
May 20 14:43:47 gerard gnome-shell[1040]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 25ms, your system is too slow
May 20 14:43:47 gerard gnome-shell[1040]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 13ms, your system is too slow
May 20 14:43:48 gerard gnome-shell[1040]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 23ms, your system is too slow
May 20 14:43:48 gerard gnome-shell[1040]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 20 14:48:20 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 20 14:48:20 gerard kernel: [    0.561219] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 20 14:48:20 gerard kernel: [    4.431274] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 20 14:48:20 gerard kernel: [    5.347333] kfd kfd: error getting iommu info. is the iommu enabled?
May 20 14:48:20 gerard kernel: [    5.347885] kfd kfd: device 1002:15d8 NOT added due to errors
May 20 14:48:21 gerard systemd-xdg-autostart-generator[879]: Not generating service for XDG autostart app-org.gnome.DejaDup.Monitor-autostart.service, error parsing Exec= line: No such file or directory
May 20 14:48:26 gerard snap-store[1382]: not handling error no-network for action refresh: Cannot refresh cache whilst offline
May 20 14:48:26 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 14:48:26 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 14:50:58 gerard gnome-shell[1060]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 21ms, your system is too slow
May 20 14:51:20 gerard gnome-shell[1060]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 38ms, your system is too slow
May 20 14:53:39 gerard gnome-shell[1060]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 19ms, your system is too slow
May 20 14:56:40 gerard gnome-shell[1060]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 32ms, your system is too slow
May 20 14:57:43 gerard gnome-shell[1060]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 28ms, your system is too slow
May 20 18:32:29 gerard gnome-shell[1060]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 17ms, your system is too slow
May 20 18:32:29 gerard gnome-shell[1060]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 14ms, your system is too slow
May 20 18:32:30 gerard gnome-shell[1060]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 12ms, your system is too slow
May 20 18:32:30 gerard gnome-shell[1060]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 15ms, your system is too slow
May 20 18:32:30 gerard gnome-shell[1060]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 18ms, your system is too slow
May 20 18:32:30 gerard gnome-shell[1060]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 20 18:32:39 gerard gnome-shell[1060]: libinput error: client bug: timer event6 debounce: scheduled expiry is in the past (-41ms), your system is too slow
May 20 18:32:39 gerard gnome-shell[1060]: libinput error: client bug: timer event6 debounce short: scheduled expiry is in the past (-54ms), your system is too slow
May 20 18:32:49 gerard gnome-shell[1060]: libinput error: client bug: timer event6 debounce: scheduled expiry is in the past (-29ms), your system is too slow
May 20 18:32:49 gerard gnome-shell[1060]: libinput error: client bug: timer event6 debounce short: scheduled expiry is in the past (-42ms), your system is too slow
May 20 18:33:45 gerard gnome-shell[1060]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 28ms, your system is too slow
May 20 18:33:49 gerard gnome-shell[1060]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 11ms, your system is too slow
May 20 18:33:51 gerard gnome-shell[1060]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 15ms, your system is too slow
May 20 18:34:15 gerard gnome-shell[1060]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _checkGC@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/iconCache.js:110:1#012  add@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/iconCache.js:62:14#012  _cacheOrCreateIconByName@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:452:37#012  async*_updateIconByType@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:702:36#012  _updateIcon@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:731:14#012  _invalidateIcon@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:755:14#012  _init/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:401:18#012  _emit@resource:///org/gnome/gjs/modules/core/_signals.js:114:47#012  _checkIfReady@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:124:18#012  _onPropertiesChanged/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:315:27#012  _onPropertiesChanged@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:289:15
May 20 18:34:15 gerard gnome-shell[1060]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  enable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:58:5#012  _callExtensionEnable@resource:///org/gnome/shell/ui/extensionSystem.js:168:32#012  loadExtension@resource:///org/gnome/shell/ui/extensionSystem.js:351:26#012  _loadExtensions/<@resource:///org/gnome/shell/ui/extensionSystem.js:597:18#012  collectFromDatadirs@resource:///org/gnome/shell/misc/fileUtils.js:27:28#012  _loadExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:572:19#012  _enableAllExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:606:18#012  _sessionUpdated@resource:///org/gnome/shell/ui/extensionSystem.js:637:18#012  init@resource:///org/gnome/shell/ui/extensionSystem.js:57:14#012  _initializeUI@resource:///org/gnome/shell/ui/main.js:272:22#012  start@resource:///org/gnome/shell/ui/main.js:162:5#012  @<main>:1:47
May 20 18:34:15 gerard gnome-shell[1060]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  enable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:58:5#012  _callExtensionEnable@resource:///org/gnome/shell/ui/extensionSystem.js:168:32#012  loadExtension@resource:///org/gnome/shell/ui/extensionSystem.js:351:26#012  _loadExtensions/<@resource:///org/gnome/shell/ui/extensionSystem.js:597:18#012  collectFromDatadirs@resource:///org/gnome/shell/misc/fileUtils.js:27:28#012  _loadExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:572:19#012  _enableAllExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:606:18#012  _sessionUpdated@resource:///org/gnome/shell/ui/extensionSystem.js:637:18#012  init@resource:///org/gnome/shell/ui/extensionSystem.js:57:14#012  _initializeUI@resource:///org/gnome/shell/ui/main.js:272:22#012  start@resource:///org/gnome/shell/ui/main.js:162:5#012  @<main>:1:47
May 20 18:34:42 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 20 18:34:42 gerard kernel: [    0.558681] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 20 18:34:42 gerard kernel: [    4.429955] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 20 18:34:42 gerard kernel: [    5.386886] kfd kfd: error getting iommu info. is the iommu enabled?
May 20 18:34:42 gerard kernel: [    5.387254] kfd kfd: device 1002:15d8 NOT added due to errors
May 20 18:34:43 gerard systemd-xdg-autostart-generator[874]: Not generating service for XDG autostart app-org.gnome.DejaDup.Monitor-autostart.service, error parsing Exec= line: No such file or directory
May 20 18:34:48 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 18:34:56 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 18:34:56 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 18:34:56 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 18:34:56 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 18:34:56 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 18:34:56 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 18:34:56 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 18:34:56 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 18:34:56 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 18:34:56 gerard systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
May 20 18:34:57 gerard whoopsie[1716]: [18:34:57] Sent; server replied with: No error
May 20 19:07:57 gerard gnome-shell[1046]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 15ms, your system is too slow
May 20 19:08:18 gerard gnome-shell[3383]: Fontconfig error: Cannot load default config file: No such file: (null)
May 20 19:11:16 gerard gnome-shell[1046]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 13ms, your system is too slow
May 20 19:11:50 gerard gnome-shell[1046]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 12ms, your system is too slow
May 20 19:12:00 gerard gnome-shell[1046]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 24ms, your system is too slow
May 20 19:12:31 gerard gnome-shell[4620]: syntax error: line 1 of stdin
May 20 19:13:07 gerard gnome-shell[1046]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 26ms, your system is too slow
May 20 19:15:18 gerard gnome-shell[1046]: libinput error: client bug: timer event6 debounce: scheduled expiry is in the past (-11ms), your system is too slow
May 20 19:15:18 gerard gnome-shell[1046]: libinput error: client bug: timer event6 debounce short: scheduled expiry is in the past (-24ms), your system is too slow
May 20 19:16:30 gerard gnome-shell[1046]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  init/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:30:40#012  _emit@resource:///org/gnome/gjs/modules/core/_signals.js:114:47#012  AppIndicatorsNameWatcher/this._watcherId<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/util.js:206:22
May 20 19:16:30 gerard gnome-shell[1046]: message repeated 9 times: [ Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  init/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/ext]
May 20 19:16:30 gerard gnome-shell[1046]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  enable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:58:5#012  _callExtensionEnable@resource:///org/gnome/shell/ui/extensionSystem.js:168:32#012  loadExtension@resource:///org/gnome/shell/ui/extensionSystem.js:351:26#012  _loadExtensions/<@resource:///org/gnome/shell/ui/extensionSystem.js:597:18#012  collectFromDatadirs@resource:///org/gnome/shell/misc/fileUtils.js:27:28#012  _loadExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:572:19#012  _enableAllExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:606:18#012  _sessionUpdated@resource:///org/gnome/shell/ui/extensionSystem.js:637:18#012  init@resource:///org/gnome/shell/ui/extensionSystem.js:57:14#012  _initializeUI@resource:///org/gnome/shell/ui/main.js:272:22#012  start@resource:///org/gnome/shell/ui/main.js:162:5#012  @<main>:1:47
May 20 19:16:30 gerard gnome-shell[1046]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  init/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:30:40#012  _emit@resource:///org/gnome/gjs/modules/core/_signals.js:114:47#012  AppIndicatorsNameWatcher/this._watcherId<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/util.js:206:22
May 20 19:16:30 gerard gnome-shell[1046]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  enable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:58:5#012  _callExtensionEnable@resource:///org/gnome/shell/ui/extensionSystem.js:168:32#012  loadExtension@resource:///org/gnome/shell/ui/extensionSystem.js:351:26#012  _loadExtensions/<@resource:///org/gnome/shell/ui/extensionSystem.js:597:18#012  collectFromDatadirs@resource:///org/gnome/shell/misc/fileUtils.js:27:28#012  _loadExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:572:19#012  _enableAllExtensions@resource:///org/gnome/shell/ui/extensionSystem.js:606:18#012  _sessionUpdated@resource:///org/gnome/shell/ui/extensionSystem.js:637:18#012  init@resource:///org/gnome/shell/ui/extensionSystem.js:57:14#012  _initializeUI@resource:///org/gnome/shell/ui/main.js:272:22#012  start@resource:///org/gnome/shell/ui/main.js:162:5#012  @<main>:1:47
May 20 19:16:30 gerard gnome-shell[1046]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  init/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:30:40#012  _emit@resource:///org/gnome/gjs/modules/core/_signals.js:114:47#012  AppIndicatorsNameWatcher/this._watcherId<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/util.js:206:22
May 20 19:16:30 gerard gnome-shell[1046]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _checkGC@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/iconCache.js:110:1#012  add@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/iconCache.js:62:14#012  _cacheOrCreateIconByName@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:452:37#012  async*_updateIconByType@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:702:36#012  _updateIcon@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:731:14#012  _invalidateIcon@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:755:14#012  _init/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:401:18#012  _emit@resource:///org/gnome/gjs/modules/core/_signals.js:114:47#012  _checkIfReady@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:124:18#012  _onPropertiesChanged/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:315:27#012  _onPropertiesChanged@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:289:15
May 20 19:16:30 gerard gnome-shell[1046]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  init/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:30:40#012  _emit@resource:///org/gnome/gjs/modules/core/_signals.js:114:47#012  AppIndicatorsNameWatcher/this._watcherId<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/util.js:206:22
May 20 19:16:30 gerard gnome-shell[1046]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _onProxySignal@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:207:1
May 20 19:16:30 gerard gnome-shell[1046]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  init/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:30:40#012  _emit@resource:///org/gnome/gjs/modules/core/_signals.js:114:47#012  AppIndicatorsNameWatcher/this._watcherId<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/util.js:206:22
May 20 19:16:30 gerard gnome-shell[1046]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _checkGC@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/iconCache.js:110:1#012  add@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/iconCache.js:62:14#012  _cacheOrCreateIconByName@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:452:37#012  async*_updateIconByType@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:702:36#012  _updateIcon@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:731:14#012  _invalidateIcon@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:755:14#012  _init/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:401:18#012  _emit@resource:///org/gnome/gjs/modules/core/_signals.js:114:47#012  _checkIfReady@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:124:18#012  _onPropertiesChanged/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:315:27#012  _onPropertiesChanged@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/appIndicator.js:289:15
May 20 19:16:30 gerard gnome-shell[1046]: Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  init/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:30:40#012  _emit@resource:///org/gnome/gjs/modules/core/_signals.js:114:47#012  AppIndicatorsNameWatcher/this._watcherId<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/util.js:206:22
May 20 19:16:30 gerard gnome-shell[1046]: message repeated 3 times: [ Unhandled promise rejection. To suppress this warning, add an error handler to your promise chain with .catch() or a try-catch block around your await expression. Stack trace of the failed promise:#012  _seekStatusNotifierItems/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:1#012  _seekStatusNotifierItems@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:140:21#012  async*AppIndicatorsStatusNotifierWatcher@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/statusNotifierWatcher.js:56:14#012  maybeEnableAfterNameAvailable@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/extension.js:53:33#012  init/<@/usr/share/gnome-shell/extensions/ubuntu-appindicators@ubuntu.com/ext]
May 20 19:16:52 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 20 19:16:52 gerard kernel: [    0.552004] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 20 19:16:52 gerard kernel: [    4.401225] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 20 19:16:52 gerard kernel: [    5.347547] kfd kfd: error getting iommu info. is the iommu enabled?
May 20 19:16:52 gerard kernel: [    5.347858] kfd kfd: device 1002:15d8 NOT added due to errors
May 20 19:16:53 gerard systemd-xdg-autostart-generator[884]: Not generating service for XDG autostart app-org.gnome.DejaDup.Monitor-autostart.service, error parsing Exec= line: No such file or directory
May 20 19:16:58 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 19:17:05 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 19:17:05 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 19:17:05 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 19:17:05 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 19:17:06 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 19:17:06 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 19:17:06 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 19:17:06 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 20 19:17:06 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 20 19:17:06 gerard systemd[1]: Failed to start Process error reports when automatic reporting is enabled.
May 20 19:17:06 gerard whoopsie[1713]: [19:17:06] Sent; server replied with: No error
May 20 19:19:00 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 14ms, your system is too slow
May 20 20:22:15 gerard gnome-shell[3405]: Fontconfig error: Cannot load default config file: No such file: (null)
May 20 20:33:55 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 15ms, your system is too slow
May 20 20:34:15 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 48ms, your system is too slow
May 20 20:34:25 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 43ms, your system is too slow
May 20 20:34:31 gerard gnome-shell[3405]: Fontconfig error: Cannot load default config file: No such file: (null)
May 20 20:43:59 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
May 20 20:57:16 gerard gnome-shell[4536]: Fontconfig error: Cannot load default config file: No such file: (null)
May 20 21:06:59 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 17ms, your system is too slow
May 20 21:06:59 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 20 21:16:23 gerard gnome-shell[1061]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 59ms, your system is too slow
May 20 21:19:16 gerard gnome-shell[1061]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 52ms, your system is too slow
May 20 21:20:19 gerard gnome-shell[4536]: Fontconfig error: Cannot load default config file: No such file: (null)
May 20 21:21:34 gerard gnome-shell[4536]: Fontconfig error: Cannot load default config file: No such file: (null)
May 20 21:35:35 gerard gnome-shell[4536]: Fontconfig error: Cannot load default config file: No such file: (null)
May 20 21:43:42 gerard gnome-shell[1061]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 16ms, your system is too slow
May 20 21:51:09 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 22ms, your system is too slow
May 20 21:52:35 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 75ms, your system is too slow
May 20 21:54:56 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 12ms, your system is too slow
May 21 06:35:05 gerard systemd[1]: Started Process error reports when automatic reporting is enabled (file watch).
May 21 06:35:05 gerard kernel: [    0.561921] ACPI Error: Aborting method \_SB.PCI0.GP17.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
May 21 06:35:05 gerard kernel: [    4.437808] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
May 21 06:35:05 gerard kernel: [    5.362310] kfd kfd: error getting iommu info. is the iommu enabled?
May 21 06:35:05 gerard kernel: [    5.362697] kfd kfd: device 1002:15d8 NOT added due to errors
May 21 06:35:06 gerard systemd-xdg-autostart-generator[909]: Not generating service for XDG autostart app-org.gnome.DejaDup.Monitor-autostart.service, error parsing Exec= line: No such file or directory
May 21 06:35:11 gerard snap-store[1442]: not handling error download-failed for action refresh: failed to download https://cdn.fwupd.org/downloads/firmware.xml.gz.jcat: Cannot resolve hostname
May 21 06:35:11 gerard snap-store[1442]: not handling error download-failed for action refresh: failed to download https://cdn.fwupd.org/downloads/firmware.xml.gz.jcat: Cannot resolve hostname
May 21 06:35:11 gerard systemd[1]: Starting Process error reports when automatic reporting is enabled...
May 21 06:35:12 gerard systemd[1]: Finished Process error reports when automatic reporting is enabled.
May 21 06:35:17 gerard snap-store[1442]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 21 06:35:19 gerard snap-store[1442]: internal error: failed, but no error code: cancelled-priority
May 21 06:35:21 gerard snap-store[1442]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 21 06:35:22 gerard snap-store[1442]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 21 06:35:24 gerard snap-store[1442]: not handling error failed for action refresh: E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-updates/InRelease  #012E: Impossible de récupérer http://be.archive.ubuntu.com/ubuntu/dists/hirsute-backports/InRelease  #012E: Impossible de récupérer http://archive.canonical.com/ubuntu/dists/hirsute/InRelease  #012E: Impossible de récupérer http://security.ubuntu.com/ubuntu/dists/hirsute-security/InRelease  #012E: Impossible de récupérer http://dl.google.com/linux/chrome/deb/dists/stable/InRelease  #012E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.
May 21 06:39:14 gerard gnome-shell[1101]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 16ms, your system is too slow
May 21 06:39:32 gerard gnome-shell[1101]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 40ms, your system is too slow
May 21 06:39:55 gerard gnome-shell[1101]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 12ms, your system is too slow
May 21 06:54:37 gerard gnome-shell[1101]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 23ms, your system is too slow
May 21 06:57:38 gerard gnome-shell[1101]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 20ms, your system is too slow
May 21 06:57:51 gerard gnome-shell[1101]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 12ms, your system is too slow
May 21 06:57:51 gerard gnome-shell[1101]: libinput error: event3  - Logitech USB Keyboard: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 21 06:59:28 gerard gnome-shell[1101]: libinput error: event6  - Logitech MX518 Gaming Mouse: client bug: event processing lagging behind by 14ms, your system is too slow

Gerinald · Le 21/05/2021, à 09:51

Hello le monde

Bon ben ... y a autre chose ... ça continue encore

A voir les erreurs, je sent de l'amusement dans l'air

xubu1957 · Le 21/05/2021, à 09:58

Bonjour,

Montre aussi d'éventuels paquets cassés :

dpkg -l | grep -v ^ii

Gerinald · Le 21/05/2021, à 10:01

xubu1957 a écrit :

Bonjour,
Montre aussi d'éventuels paquets cassés

Bonjour xubu,

Voici

gerard@gerard:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                        Version                                                              Architecture Description
+++-==========================================-====================================================================-============-===============================================================================
rc  deja-dup                                   42.7-1ubuntu1                                                        amd64        Backup utility
rc  libvdpau1:amd64                            1.4-3                                                                amd64        Video Decode and Presentation API for Unix (libraries)
gerard@gerard:~$

xubu1957 · Le 21/05/2021, à 10:07

May 19 18:44:21 gerard gnome-shell[1061]: libinput error: event6  - Logitech MX518 Gaming Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
May 19 18:44:50 gerard gnome-shell[1061]: libinput error: client bug: timer event6 debounce short: scheduled expiry is in the past (-8ms), your system is too slow
May 19 18:44:55 gerard gnome-shell[1061]: libinput error: event3  - Logitech USB Keyboard: client bug: event processing lagging behind by 14ms, your system is too slow

Ce ne serait pas un souci avec le touchpad ?

Gerinald · Le 21/05/2021, à 10:10

Hello xubu,

Je n'ai pas de touchpad, c'est une tour

Bon, j'ai réinstallé déjà-dup et libvdpau1 .. même si je doute que ce soit cela.

Mais oui, je trouve aussi qu'il y a beaucoup d'erreur ...

xubu1957 · Le 21/05/2021, à 10:16

your system is too slow

Montre aussi :

systemd-analyze time

systemd-analyze blame

systemd-analyze critical-chain

et :

ls -l /var/crash

Gerinald · Le 21/05/2021, à 10:36

gerard@gerard:~$ systemd-analyze time
Startup finished in 9.422s (firmware) + 4.455s (loader) + 4.158s (kernel) + 21.899s (userspace) = 39.935s 
graphical.target reached after 21.885s in userspace

gerard@gerard:~$ systemd-analyze blame
20.437s plymouth-quit-wait.service
 5.906s NetworkManager-wait-online.service
  951ms snapd.service
  845ms dev-sda3.device
  492ms networkd-dispatcher.service
  389ms fwupd.service
  342ms dev-loop1.device
  339ms dev-loop0.device
  331ms dev-loop2.device
  320ms dev-loop3.device
  306ms dev-loop4.device
  297ms dev-loop6.device
  290ms dev-loop5.device
  281ms dev-loop7.device
  245ms udisks2.service
  203ms systemd-resolved.service
  192ms accounts-daemon.service
  185ms apport.service
  180ms snap-gtk\x2dcommon\x2dthemes-1515.mount
  177ms snap-gtk\x2dcommon\x2dthemes-1514.mount
  176ms snap-snap\x2dstore-518.mount
  148ms polkit.service
  145ms NetworkManager.service
lines 1-23...skipping...
20.437s plymouth-quit-wait.service
 5.906s NetworkManager-wait-online.service
  951ms snapd.service
  845ms dev-sda3.device
  492ms networkd-dispatcher.service
  389ms fwupd.service
  342ms dev-loop1.device
  339ms dev-loop0.device
  331ms dev-loop2.device
  320ms dev-loop3.device
  306ms dev-loop4.device
  297ms dev-loop6.device
  290ms dev-loop5.device
  281ms dev-loop7.device
  245ms udisks2.service
  203ms systemd-resolved.service
  192ms accounts-daemon.service
  185ms apport.service
  180ms snap-gtk\x2dcommon\x2dthemes-1515.mount
  177ms snap-gtk\x2dcommon\x2dthemes-1514.mount
  176ms snap-snap\x2dstore-518.mount
  148ms polkit.service
  145ms NetworkManager.service
  145ms avahi-daemon.service
  141ms upower.service
  137ms systemd-timesyncd.service
  134ms snap-snapd-11588.mount
  129ms snap-core18-2066.mount
  129ms snap-gnome\x2d3\x2d34\x2d1804-66.mount
  128ms snap-core18-1997.mount
  128ms power-profiles-daemon.service
  126ms systemd-journal-flush.service
  124ms snap-snapd-11841.mount
  121ms switcheroo-control.service
  121ms apport-autoreport.service
  113ms systemd-logind.service
  112ms thermald.service
  111ms apparmor.service
  104ms wpa_supplicant.service
   99ms ModemManager.service
   96ms update-notifier-download.service
   92ms user@1000.service
   78ms systemd-journald.service
   76ms virtualbox.service
   71ms systemd-udev-trigger.service
   69ms cups.service
   66ms gpu-manager.service
   64ms snapd.apparmor.service
   62ms swapfile.swap
   61ms gdm.service
   58ms systemd-udevd.service
   52ms keyboard-setup.service
   46ms grub-initrd-fallback.service
   44ms grub-common.service
   42ms systemd-modules-load.service
   41ms geoclue.service
   41ms e2scrub_reap.service
lines 1-57























































20.437s plymouth-quit-wait.service
 5.906s NetworkManager-wait-online.service
  951ms snapd.service
  845ms dev-sda3.device
  492ms networkd-dispatcher.service
  389ms fwupd.service
  342ms dev-loop1.device
  339ms dev-loop0.device
  331ms dev-loop2.device
  320ms dev-loop3.device
  306ms dev-loop4.device
  297ms dev-loop6.device
  290ms dev-loop5.device
  281ms dev-loop7.device
  245ms udisks2.service
  203ms systemd-resolved.service
  192ms accounts-daemon.service
  185ms apport.service
  180ms snap-gtk\x2dcommon\x2dthemes-1515.mount
  177ms snap-gtk\x2dcommon\x2dthemes-1514.mount
  176ms snap-snap\x2dstore-518.mount
  148ms polkit.service
  145ms NetworkManager.service
  145ms avahi-daemon.service
  141ms upower.service
  137ms systemd-timesyncd.service
  134ms snap-snapd-11588.mount
  129ms snap-core18-2066.mount
  129ms snap-gnome\x2d3\x2d34\x2d1804-66.mount
  128ms snap-core18-1997.mount
  128ms power-profiles-daemon.service
  126ms systemd-journal-flush.service
  124ms snap-snapd-11841.mount
  121ms switcheroo-control.service
  121ms apport-autoreport.service
  113ms systemd-logind.service
  112ms thermald.service
  111ms apparmor.service
  104ms wpa_supplicant.service
   99ms ModemManager.service
   96ms update-notifier-download.service
   92ms user@1000.service
   78ms systemd-journald.service
   76ms virtualbox.service
   71ms systemd-udev-trigger.service
   69ms cups.service
   66ms gpu-manager.service
   64ms snapd.apparmor.service
   62ms swapfile.swap
   61ms gdm.service
   58ms systemd-udevd.service
   52ms keyboard-setup.service
   46ms grub-initrd-fallback.service
   44ms grub-common.service
   42ms systemd-modules-load.service
   41ms geoclue.service
   41ms e2scrub_reap.service
   39ms packagekit.service
   35ms rsyslog.service
   31ms snapd.seeded.service
   25ms systemd-tmpfiles-clean.service
   24ms systemd-sysusers.service
   23ms kerneloops.service
   21ms pppd-dns.service
   20ms systemd-random-seed.service
   20ms colord.service
   20ms plymouth-start.service
   19ms systemd-sysctl.service
   19ms systemd-tmpfiles-setup.service
   18ms dev-hugepages.mount
   18ms dev-mqueue.mount
   17ms sys-kernel-debug.mount
   17ms systemd-fsck@dev-disk-by\x2duuid-E073\x2d3DF5.service
   17ms sys-kernel-tracing.mount
   15ms modprobe@drm.service
   14ms kmod-static-nodes.service
   13ms systemd-remount-fs.service
   13ms modprobe@configfs.service
   12ms modprobe@fuse.service
   11ms alsa-restore.service
   11ms plymouth-read-write.service
    9ms systemd-update-utmp-runlevel.service
    8ms ufw.service
    8ms systemd-tmpfiles-setup-dev.service
    8ms systemd-update-utmp.service
    7ms openvpn.service
    7ms systemd-user-sessions.service
    6ms boot-efi.mount
    5ms user-runtime-dir@1000.service
    4ms rtkit-daemon.service
    4ms sys-kernel-config.mount
    3ms setvtrgb.service
    3ms console-setup.service
    1ms sys-fs-fuse-connections.mount
  525us snapd.socket

gerard@gerard:~$ systemd-analyze critical-chain
The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.

graphical.target @21.885s
└─multi-user.target @21.884s
  └─plymouth-quit-wait.service @1.445s +20.437s
    └─systemd-user-sessions.service @1.431s +7ms
      └─network.target @1.426s
        └─NetworkManager.service @1.280s +145ms
          └─dbus.service @1.277s
            └─dbus.socket @1.268s
              └─basic.target @1.268s
                └─sockets.target @1.268s
                  └─snapd.socket @1.267s +525us
                    └─sysinit.target @1.262s
                      └─snapd.apparmor.service @1.198s +64ms
                        └─apparmor.service @1.085s +111ms
                          └─local-fs.target @1.085s
                            └─run-snapd-ns-snap\x2dstore.mnt.mount @4.231s
                              └─run-snapd-ns.mount @4.032s
                                └─swap.target @282ms
                                  └─swapfile.swap @219ms +62ms
                                    └─systemd-remount-fs.service @204ms +13ms
                                      └─systemd-journald.socket @191ms
                                        └─-.mount @127ms
                                          └─-.slice @127ms
gerard@gerard:~$

gerard@gerard:~$ ls -l /var/crash
total 4
-rw-r--r-- 1 gerard   whoopsie  0 mai 21 09:49 _usr_bin_birdtray.1000.upload
-rw------- 1 whoopsie whoopsie 37 mai 21 09:49 _usr_bin_birdtray.1000.uploaded
gerard@gerard:~$

xubu1957 · Le 21/05/2021, à 10:41

Je ne sais pas aider plus. ¯\_(ツ)_/¯

Gerinald · Le 21/05/2021, à 10:49

xubu1957 a écrit :

Je ne sais pas aider plus. ¯\_(ツ)_/¯

Pas de souci, c'est déjà bien gentil de ta part

Bat et merci

iznobe · Le 21/05/2021, à 11:06

Bonjour wouaw ! vu le retour des erreurs du journal , y a effectivement un soucis ... faut faire une recherche sur le net avec les erreurs qui reviennent le plus souvent comme xubu1957 l 'a fait remarquer , je ne vois pas vraiment sinon , mais va falloir surveiller et surtout limiter la taille du journal , il va vite saturer ton disque sinon , et ut risque de te retrouver bloquer avec plus d' espace dispo sur le disque la partition " / " .

que donne

dpkg -l | grep logi

si tu as installer je ne sais quoi de chez logitech , essai de le desinstaller , a priori c' est un probleme clavier + souris .
essaie un autre clavier et une autre souris .
verifie qu ' un bouton de la souris et du clavier ne soit pas bloqué .

on pourrait aussi essayer de supprimer + purger libinput puis de le reinstaller dans la foulée , mais je prefere laisser cela a quelqu ' un qui saura te donner une commande avec laquelle tu ne perdras pas le controle de ton ordinateur et qui connais mieux que moi comment reagir face a un probleme de la sorte . et puis il faut voir cela apres avoir verifier que le probleme n ' est pas materiel .

Dernière modification par iznobe (Le 21/05/2021, à 11:22)

Gerinald · Le 21/05/2021, à 11:22

Bonjour Iznobe,

Ce qui est bizarre, c'est que je n'ai jamais eu de souci auparavant, avec les versions précédente ... c'est vraiment sur cette nouvelle version que j'ai de gros soucis.

L'installation est une installation simple, sans pilote quelconque, même le pilote graphique est le driver Libre.

Pas d'autres souris ni clavier .... d'autant que cela ne me pose pas de souci sous Manjaro et Mint, c'est clairement Ubuntu qui bloque.

Il va s'en dire que avant de poser la question, j'ai trifouiller dans la doc et déjà effectuer des recherches sur le forum, mais là, même moi je plante ... LoL

gerard@gerard:~$ dpkg -l | grep logi
ii  libhunspell-1.7-0:amd64                    1.7.0-3                                                              amd64        spell checker and morphological analyzer (shared library)
ii  libllvm11:amd64                            1:11.0.1-2ubuntu4                                                    amd64        Modular compiler and toolchain technologies, runtime library
ii  libpam-gnome-keyring:amd64                 3.36.0-1ubuntu1                                                      amd64        PAM module to unlock the GNOME keyring upon login
ii  login                                      1:4.8.1-1ubuntu8                                                     amd64        system login tools
gerard@gerard:~$

iznobe · Le 21/05/2021, à 11:29

il y a une commande pour tester les boutons de la souris , mais me rapelle plus laquelle c ' est ... tu as une souris gamer , il y a de forte chance que ce soit un probleme avec un bouton dont tu ne te sers habituellement pas qui soit bloqué .

le truc c' est que avec la version 21.04 , plus de bouton souris sont pris en compte par defaut il me semble , donc le probleme n ' est pas rencontré sur les distrib qui ne gere pas autant de boutons , je dirais donc que c' est normal ( si le bouton est bloqué ) . il suffira donc de le desactiver pour revenir a une situation identique aux distribs precedentes . pour cela il faut deja l' identifier .

EDIT : je crois que c ' est la commande XEV mais je ne suis pas chez moi et je ne peux donc tester :

xev

Dernière modification par iznobe (Le 21/05/2021, à 11:38)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 19/05/2021, à 18:55

[Abandon] Gnome-shell et CPU à 100%

#2 Le 20/05/2021, à 12:35

Re : [Abandon] Gnome-shell et CPU à 100%

#3 Le 20/05/2021, à 14:05

Re : [Abandon] Gnome-shell et CPU à 100%

#4 Le 20/05/2021, à 14:57

Re : [Abandon] Gnome-shell et CPU à 100%

#5 Le 20/05/2021, à 21:19

Re : [Abandon] Gnome-shell et CPU à 100%

#6 Le 20/05/2021, à 21:36

Re : [Abandon] Gnome-shell et CPU à 100%

#7 Le 20/05/2021, à 21:44

Re : [Abandon] Gnome-shell et CPU à 100%

#8 Le 20/05/2021, à 21:47

Re : [Abandon] Gnome-shell et CPU à 100%

#9 Le 20/05/2021, à 21:54

Re : [Abandon] Gnome-shell et CPU à 100%

#10 Le 20/05/2021, à 22:03

Re : [Abandon] Gnome-shell et CPU à 100%

#11 Le 20/05/2021, à 22:52

Re : [Abandon] Gnome-shell et CPU à 100%

#12 Le 20/05/2021, à 23:28

Re : [Abandon] Gnome-shell et CPU à 100%

#13 Le 21/05/2021, à 07:00

Re : [Abandon] Gnome-shell et CPU à 100%

#14 Le 21/05/2021, à 09:51

Re : [Abandon] Gnome-shell et CPU à 100%

#15 Le 21/05/2021, à 09:58

Re : [Abandon] Gnome-shell et CPU à 100%

#16 Le 21/05/2021, à 10:01

Re : [Abandon] Gnome-shell et CPU à 100%

#17 Le 21/05/2021, à 10:07

Re : [Abandon] Gnome-shell et CPU à 100%

#18 Le 21/05/2021, à 10:10

Re : [Abandon] Gnome-shell et CPU à 100%

#19 Le 21/05/2021, à 10:16

Re : [Abandon] Gnome-shell et CPU à 100%

#20 Le 21/05/2021, à 10:36

Re : [Abandon] Gnome-shell et CPU à 100%

#21 Le 21/05/2021, à 10:41

Re : [Abandon] Gnome-shell et CPU à 100%

#22 Le 21/05/2021, à 10:49

Re : [Abandon] Gnome-shell et CPU à 100%

#23 Le 21/05/2021, à 11:06

Re : [Abandon] Gnome-shell et CPU à 100%

#24 Le 21/05/2021, à 11:22

Re : [Abandon] Gnome-shell et CPU à 100%

#25 Le 21/05/2021, à 11:29

Re : [Abandon] Gnome-shell et CPU à 100%

Pied de page des forums