Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 26/02/2021, à 19:21

Stenogeek

EPSON Stylus DX4400

Bonjour bonsoir,

Voilà j'ai installé ubuntu 20.04 il y a quelques jours. Après un petit "problème" de wifi me voilà embêté avec l'imprimante.
Elle est reconnue, mais dès que je lance une impression il ne passe rien. Il y a du papier et les niveaux d'encres sont bon.

cat /etc/lsb-release && uname -ir && groups && lsusb
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04.2 LTS"
5.8.0-43-generic x86_64
lescargot adm cdrom sudo dip plugdev lpadmin lxd sambashare
Bus 002 Device 003: ID 04b8:083f Seiko Epson Corp. Stylus CX4300/CX4400/CX5500/CX5600/DX4400/DX4450
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 13d3:5130 IMC Networks Integrated Webcam
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
dpkg -l | grep epson

ne me retourne rien

dpkg -l | grep cups
ii  bluez-cups                                 5.53-0ubuntu3                       amd64        Bluetooth printer driver for CUPS
ii  cups                                       2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - PPD/driver support, web interface
ii  cups-browsed                               1.27.4-1                            amd64        OpenPrinting CUPS Filters - cups-browsed
ii  cups-bsd                                   2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - BSD commands
ii  cups-client                                2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - client programs (SysV)
ii  cups-common                                2.3.1-9ubuntu1.1                    all          Common UNIX Printing System(tm) - common files
ii  cups-core-drivers                          2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - driverless printing
ii  cups-daemon                                2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - daemon
ii  cups-filters                               1.27.4-1                            amd64        OpenPrinting CUPS Filters - Main Package
ii  cups-filters-core-drivers                  1.27.4-1                            amd64        OpenPrinting CUPS Filters - Driverless printing
ii  cups-ipp-utils                             2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - IPP developer/admin utilities
ii  cups-pk-helper                             0.2.6-1ubuntu3                      amd64        PolicyKit helper to configure cups with fine-grained privileges
ii  cups-ppdc                                  2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - PPD manipulation utilities
ii  cups-server-common                         2.3.1-9ubuntu1.1                    all          Common UNIX Printing System(tm) - server common files
ii  libcups2:amd64                             2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - Core library
ii  libcupsfilters1:amd64                      1.27.4-1                            amd64        OpenPrinting CUPS Filters - Shared library
ii  libcupsimage2:amd64                        2.3.1-9ubuntu1.1                    amd64        Common UNIX Printing System(tm) - Raster image library
ii  printer-driver-hpcups                      3.20.3+dfsg0-2                      amd64        HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii  python3-cups                               1.9.73-3build1                      amd64        Python3 bindings for CUPS
ii  python3-cupshelpers                        1.5.12-0ubuntu1.1                   all          Python utility modules around the CUPS printing system
lpstat -t
scheduler is running
system default destination: Stylus-DX4400
matériel pour Stylus-DX4400 : usb://EPSON/Stylus%20DX4400?serial=B09210803181347050&interface=1
Stylus-DX4400 accepte des requêtes depuis ven. 26 févr. 2021 19:09:05
printer Stylus-DX4400 now printing Stylus-DX4400-7.  enabled since ven. 26 févr. 2021 19:09:05
	Sending data to printer.
Stylus-DX4400-7         lescargot        71680   ven. 26 févr. 2021 19:09:05
/usr/sbin/lpinfo -v
direct hp
network ipp
file cups-brf:/
network beh
network ipps
network http
network https
network lpd
network socket
direct hpfax
cat /var/log/cups/error_log
W [26/Feb/2021:08:34:15 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Stylus-DX4400-Gray..\' already exists
W [26/Feb/2021:08:34:15 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Stylus-DX4400-RGB..\' already exists
W [26/Feb/2021:08:34:15 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Stylus-DX4400-Gray..\' already exists
W [26/Feb/2021:08:34:15 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Stylus-DX4400-RGB..\' already exists
E [26/Feb/2021:08:34:32 +0100] [Client 210] Returning IPP client-error-not-possible for Cancel-Job (ipp://localhost/jobs/2) from localhost.
E [26/Feb/2021:08:34:35 +0100] [Client 210] Returning IPP client-error-not-possible for Cancel-Job (ipp://localhost/jobs/2) from localhost.
E [26/Feb/2021:08:34:37 +0100] [Client 210] Returning IPP client-error-not-possible for Cancel-Job (ipp://localhost/jobs/2) from localhost.
E [26/Feb/2021:08:36:39 +0100] [Job 5] Unable to send data to printer.
E [26/Feb/2021:18:46:23 +0100] [Job 5] Job held by \"lescargot\".
E [26/Feb/2021:18:51:24 +0100] [Job 5] Stopping unresponsive job.
dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                        Version                             Architecture Description
+++-==========================================-===================================-============-======================================================================================================

Merci d'avance !

Hors ligne

#2 Le 26/02/2021, à 19:23

xubu1957

Re : EPSON Stylus DX4400

Bonjour,

Essaye :

Le 11/10/2020, ylag a écrit :

Bonjour,

(...)
Si ça ne fonctionne pas, peut-être tenter la suppression du paquet ippusbxd qui semble poser problème pour les imprimantes usb sur la 20.04?

sudo apt purge ippusbxd

...redémarrer et encore tenter de réinstaller l'imprimante?

Si ça ne fonctionne toujours pas, simplement réinstaller le paquet pour revenir à l'état initial:

sudo apt install ippusbxd

A+

dans > [RÉSOLU]Imprimante Canon et Ubuntu 20.04


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#3 Le 26/02/2021, à 20:07

Stenogeek

Re : EPSON Stylus DX4400

J'ai supprimer le paquet puis redémarré, l'imprimante refuse de bouger.
J'ai réinstallé le paquet puis redémarré, idem..

Hors ligne

#4 Le 26/02/2021, à 20:11

xubu1957

Re : EPSON Stylus DX4400

Tente :

 sudo /etc/init.d/cups restart

Dernière modification par xubu1957 (Le 26/02/2021, à 20:11)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#5 Le 26/02/2021, à 20:18

Stenogeek

Re : EPSON Stylus DX4400

Non plus

Hors ligne

#6 Le 26/02/2021, à 20:39

xubu1957

Re : EPSON Stylus DX4400

Essaye :

sudo systemctl restart cups.service

Tu n'avais pas de message d'erreur, avec la commande fournie au #4 ?


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#7 Le 26/02/2021, à 21:02

Stenogeek

Re : EPSON Stylus DX4400

Non pas de message d'erreur il c'est produit exactement la même chose avec la commande que tu viens de me fournir : une boite de dialogue en haut m'indique qu'il imprime un document mais rien ne ce passe

Dernière modification par Stenogeek (Le 26/02/2021, à 21:03)

Hors ligne

#8 Le 26/02/2021, à 21:24

xubu1957

Re : EPSON Stylus DX4400

Il faut attendre des intervenants connaisseurs.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#9 Le 28/02/2021, à 18:29

Stenogeek

Re : EPSON Stylus DX4400

Bonsoir j'ai du nouveau...!

J'ai suivi cette méthode. Tout c'est bien passé et quand je lance

./configure

j'ai une erreur avec CUPS.

./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking for C++ compiler default output... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking for bison... no
checking for byacc... no
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking for a sed that does not truncate output... /usr/bin/sed
checking how to recognise dependent libraries... pass_all
checking command to parse /usr/bin/nm -B output... ok
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for ranlib... ranlib
checking for strip... strip
checking for objdir... .libs
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.lo... yes
checking if gcc supports -fno-rtti -fno-exceptions... yes
checking whether the linker (/usr/bin/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether -lc should be explicitly linked in... no
creating libtool
checking for pkg-config... /usr/bin/pkg-config
checking for gtk+-2.0... yes
checking GTK_CFLAGS... -pthread -I/usr/include/gtk-2.0 -I/usr/lib/x86_64-linux-gnu/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/pango-1.0 -I/usr/include/fribidi -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16
checking GTK_LIBS... -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lharfbuzz -lfontconfig -lfreetype
checking for xml2-config... yes
checking for cups-config... no
./configure: line 8538: test: =: unary operator expected
configure: error: *** 'cups-config' missing, please install CUPS or fix your $PATH ***

Hors ligne