#1 Le 27/12/2020, à 15:44
- mvb1
[RESOLU sauf clavier] Installation linux sur thomson HERO13
Bonjour
On m'a donné un ordi tablette Hero 13 4go ram sur lequel windows 10 a rendu l'âme.. et pour cause : vendre un windows 10 sur 32 go d'espace c'est qd même énorme. Bref windows ne veut plus rien savoir, ni même son recovery
Donc install de linux
De ce que j'ai essayé, je parviens a lancer ubuntu mate ou mint en live usb mais le wifi et le pavé tactile ne sont pas reconnus.
Que me conseilleriez vous, s'il vous plaît ?
D'avance merci pour vos réponses
Dernière modification par mvb1 (Le 03/01/2021, à 12:45)
Hors ligne
#2 Le 27/12/2020, à 16:36
- Nuliel
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Bonjour,
Windows 10 n'a pas rendu l'âme, c'est juste le pc qui n'est pas fait pour durer en plus de ne pas être adapté à windows 10. Au lieu d'acheter ce genre de trucs, il serait préférable d'acheter du reconditionné ou de l'occasion, au moins tu aurais accès à de la qualité, en tout cas pas un truc qui dure un ou deux ans.
Thomson est spécialiste pour en dire le moins possible sur ses machines et mettre des composants exotiques, du coup peux tu donner les retours de
lspci -k
lscpu
lsusbTu peux aussi tester le son, à mon avis ça va pas marcher non plus.
Il n'y a pas de magie, à mon avis il faudra résoudre ces problèmes un à un, il n'y a pas de distribution qui va contenir tout ce qu'il faut pour ce pc. Par contre une distribution pas trop lourde comme xubuntu 20.04, c'est important.
En attendant d'avoir une solution pour le wifi, tu peux faire un partage de connexion de ton téléphone via usb avec le téléphone connecté à ta box.
Pour le pavé tactile, en attendant, il te faudrait une souris filaire.
Dernière modification par Nuliel (Le 27/12/2020, à 16:37)
Hors ligne
#3 Le 27/12/2020, à 18:15
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Merci pour ton intervention
Perso je n aurais jamais achete ca ... avec en plus un clavier melange entre qrty et je ne sais quoi
Le son fonctionne
le pave tactile aussi
c est la tablette que j aurais aimee recuperee
connexion reussie en bluetooth car un seul port usb occupe par ubuntu mate live
resultat des commandes
ubuntu-mate@ubuntu-mate:~$ lspci -k
00:00.0 Host bridge: Intel Corporation Device 31f0 (rev 03)
Subsystem: Intel Corporation Device 7270
00:00.1 Signal processing controller: Intel Corporation Device 318c (rev 03)
Subsystem: Intel Corporation Device 7270
00:02.0 VGA compatible controller: Intel Corporation Device 3185 (rev 03)
Subsystem: Intel Corporation Device 2212
Kernel driver in use: i915
Kernel modules: i915
00:0e.0 Audio device: Intel Corporation Device 3198 (rev 03)
Subsystem: Device 1c6c:122a
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl
00:0f.0 Communication controller: Intel Corporation Device 319a (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: mei_me
Kernel modules: mei_me
00:12.0 SATA controller: Intel Corporation Device 31e3 (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: ahci
Kernel modules: ahci
00:13.0 PCI bridge: Intel Corporation Device 31d8 (rev f3)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:13.2 PCI bridge: Intel Corporation Device 31da (rev f3)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:13.3 PCI bridge: Intel Corporation Device 31db (rev f3)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:14.0 PCI bridge: Intel Corporation Device 31d6 (rev f3)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:14.1 PCI bridge: Intel Corporation Device 31d7 (rev f3)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:15.0 USB controller: Intel Corporation Device 31a8 (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: xhci_hcd
00:16.0 Signal processing controller: Intel Corporation Device 31ac (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.1 Signal processing controller: Intel Corporation Device 31ae (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.2 Signal processing controller: Intel Corporation Device 31b0 (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.3 Signal processing controller: Intel Corporation Device 31b2 (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:17.0 Signal processing controller: Intel Corporation Device 31b4 (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:17.1 Signal processing controller: Intel Corporation Device 31b6 (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:17.2 Signal processing controller: Intel Corporation Device 31b8 (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:17.3 Signal processing controller: Intel Corporation Device 31ba (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:18.0 Signal processing controller: Intel Corporation Device 31bc (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:18.1 Signal processing controller: Intel Corporation Device 31be (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:18.3 Signal processing controller: Intel Corporation Device 31ee (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:19.0 Signal processing controller: Intel Corporation Device 31c2 (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:19.1 Signal processing controller: Intel Corporation Device 31c4 (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:19.2 Signal processing controller: Intel Corporation Device 31c6 (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:1c.0 SD Host controller: Intel Corporation Device 31cc (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
00:1e.0 SD Host controller: Intel Corporation Device 31d0 (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
00:1f.0 ISA bridge: Intel Corporation Device 31e8 (rev 03)
Subsystem: Intel Corporation Device 7270
00:1f.1 SMBus: Intel Corporation Device 31d4 (rev 03)
Subsystem: Intel Corporation Device 7270
Kernel modules: i2c_i801
01:00.0 Network controller: Intel Corporation Wireless 3165 (rev 79)
Subsystem: Intel Corporation Wireless 3165
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
ubuntu-mate@ubuntu-mate:~$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 122
Model name: Intel(R) Celeron(R) N4000 CPU @ 1.10GHz
Stepping: 1
CPU MHz: 2256.062
CPU max MHz: 2600.0000
CPU min MHz: 800.0000
BogoMIPS: 2188.80
Virtualization: VT-x
L1d cache: 24K
L1i cache: 32K
L2 cache: 4096K
NUMA node0 CPU(s): 0,1
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm 3dnowprefetch cpuid_fault cat_l2 pti cdp_l2 tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust smep erms mpx rdt_a rdseed smap clflushopt intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts umip rdpid
ubuntu-mate@ubuntu-mate:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 258a:000c
Bus 001 Device 004: ID 8087:0a2a Intel Corp.
Bus 001 Device 006: ID 2145:3822
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 002: ID 0951:1666 Kingston Technology DataTraveler G4
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
ubuntu-mate@ubuntu-mate:~$ Dernière modification par mvb1 (Le 27/12/2020, à 18:17)
Hors ligne
#4 Le 27/12/2020, à 18:33
- Nuliel
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Ok, donc il reste juste le wifi qui marche pas, ça va.
Bon, pour le processeur ça va, ça aurait pu être pire (on peut monter à 2.2 GHz, sous réserve que le pc n'ait pas trop chaud)
Pour la carte wifi, c'est une intel wireless 3165, par contre c'est bizarre que ça fonctionne pas, ça fonctionnait déjà en 2017. Peux tu essayer de démarrer windows, même en recovery, et de faire "redémarrer" et non éteindre, puis de réessayer? Ca arrive que windows ne fasse pas place nette sur le matos
Dernière modification par Nuliel (Le 27/12/2020, à 18:34)
Hors ligne
#5 Le 27/12/2020, à 21:13
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Oui manque juste le wifi et l'écran tactile
Pour le wifi j'ai essayé de faire redémarrer comme tu dis mais c'est tjs pareil
Par contre j'ai fait ce redémarrage depuis l'écran d'accueil windows car aller plus loin fait que je tombe sur un écran noir où seule la souris est active.
Pas essayé en recovery car je ne trouve pas la touche boot option démarrage
Tout ce que j'ai trouvé est l'accès à la restauration windows qui ne fonctionne pas puisque plus suffisamment d'espace disque.
Hors ligne
#6 Le 27/12/2020, à 22:08
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
EDIT
Je viens de tenter l'essaie de ubuntu 20.04 depuis live usb
Toujours pas de wifi et même pas l'icone en haut du bureau
L'écran tactile fonctionne mais alors là mdr .... l'affichage est à l'envers
Hors ligne
#7 Le 27/12/2020, à 22:14
- Nuliel
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Ah, ça doit pouvoir se régler pour l'écran, tu peux regarder dans les paramètres, sinon il doit bien y avoir une commande xrandr pour ça.
Pour le wifi, tu peux faire un wificheck: https://doc.ubuntu-fr.org/wificheck (tu as réussi à faire un partage de connexion avec ton téléphone?)
Dernière modification par Nuliel (Le 27/12/2020, à 22:15)
Hors ligne
#8 Le 27/12/2020, à 22:33
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Oui j'ai réussi à faire un partage internet via bluetooth phone
je vais étudier ton lien
pour le moment dans les paramètres je n'ai même pas vu l'option écran tactile
Dernière modification par mvb1 (Le 27/12/2020, à 22:34)
Hors ligne
#9 Le 27/12/2020, à 22:35
- Nuliel
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
En fait le wificheck donne pas mal d'infos pour comprendre le problème de wifi (c'est l'équivalent du boot info pour le réseau)
Hors ligne
#10 Le 27/12/2020, à 23:19
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Bon entre temps ubuntu a plante et me suis remis sur mate
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
ubuntu-mate@ubuntu-mate:~$ wget -N -t 5 -T 10 [url]https://framagit.org/cracolinux/wificheck/raw/master/wificheck[/url] && chmod +x wificheck && ./wificheck
--2020-12-27 21:17:36-- [url]https://framagit.org/cracolinux/wificheck/raw/master/wificheck[/url]
Resolving framagit.org (framagit.org)... 176.9.183.75, 2a01:4f8:231:4c99::75
Connecting to framagit.org (framagit.org)|176.9.183.75|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2205 (2.2K) [text/plain]
Saving to: ‘wificheck’
wificheck 100%[===================>] 2.15K --.-KB/s in 0s
Last-modified header missing -- time-stamps turned off.
2020-12-27 21:17:38 (78.1 MB/s) - ‘wificheck’ saved [2205/2205]
No LSB modules are available.
lo no wireless extensions.
bnep0 no wireless extensions.
lo Interface doesn't support scanning.
bnep0 Interface doesn't support scanning.
Le fichier wificheck.log a été crée dans /home/ubuntu-mate
Vous n'avez plus qu'à copier/coller son contenu sur le forum
accès →→ file://home/ubuntu-mate/wificheck.log
ubuntu-mate@ubuntu-mate:~$Dernière modification par mvb1 (Le 27/12/2020, à 23:21)
Hors ligne
#11 Le 27/12/2020, à 23:24
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
>> lsb_release -a
Distributor ID: Ubuntu
Description: Ubuntu 20.04.1 LTS
Release: 20.04
Codename: focal
>> lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 258a:000c HAILUCK CO.,LTD USB KEYBOARD
Bus 001 Device 004: ID 8087:0a2a Intel Corp.
Bus 001 Device 006: ID 2145:3822 USB 2.0 Camera
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 002: ID 0951:1643 Kingston Technology DataTraveler G3
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> lspci -k -nn | grep -A 3 -i net
01:00.0 Network controller [0280]: Intel Corporation Wireless 3165 [8086:3165] (rev 79)
Subsystem: Intel Corporation Wireless 3165 [8086:8110]
Kernel modules: iwlwifi
>> sudo lshw -C network
*-network
description: Ethernet interface
physical id: 1
logical name: bnep0
serial: 68:ec:c5:d8:f8:87
capabilities: ethernet physical
configuration: broadcast=yes ip=192.168.44.96 multicast=yes
>> lsmod | sort
8250_dw 16384 0
Module Size Used by
ac97_bus 16384 1 snd_soc_core
acpi_thermal_rel 16384 1 int3400_thermal
aesni_intel 372736 7
af_alg 24576 10 algif_hash,algif_skcipher
ahci 40960 0
algif_hash 16384 2
algif_skcipher 16384 2
autofs4 45056 2
bluetooth 581632 43 btrtl,btintel,btbcm,bnep,btusb,rfcomm
bnep 24576 3
btbcm 16384 1 btusb
btintel 24576 1 btusb
btrtl 24576 1 btusb
btusb 57344 0
cfg80211 704512 1 iwlwifi
cmac 16384 5
coretemp 20480 0
cqhci 28672 1 sdhci_pci
crc32_pclmul 16384 0
crct10dif_pclmul 16384 1
cryptd 24576 4 crypto_simd,ghash_clmulni_intel
crypto_simd 16384 1 aesni_intel
dm_log 20480 2 dm_region_hash,dm_mirror
dm_mirror 24576 0
dm_region_hash 20480 1 dm_mirror
drm 491520 5 drm_kms_helper,i915
drm_kms_helper 184320 1 i915
dw_dmac 16384 0
dw_dmac_core 28672 1 dw_dmac
ecc 28672 1 ecdh_generic
ecdh_generic 16384 2 bluetooth
fb_sys_fops 16384 1 drm_kms_helper
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
hid 131072 4 i2c_hid,usbhid,hid_multitouch,hid_generic
hid_generic 16384 0
hid_multitouch 28672 0
i2c_algo_bit 16384 1 i915
i2c_hid 28672 0
i2c_i801 32768 0
i915 1986560 4
icp 303104 1 zfs
idma64 20480 0
industrialio 73728 3 industrialio_triggered_buffer,kfifo_buf,kxcjk_1013
industrialio_triggered_buffer 16384 1 kxcjk_1013
input_leds 16384 0
int3400_thermal 20480 0
int3403_thermal 16384 0
int340x_thermal_zone 16384 2 int3403_thermal,processor_thermal_device
intel_cstate 20480 0
intel_hid 20480 0
intel_lpss 16384 1 intel_lpss_pci
intel_lpss_pci 20480 6
intel_pmc_ipc 20480 1 intel_telemetry_pltdrv
intel_powerclamp 20480 0
intel_punit_ipc 16384 1 intel_telemetry_pltdrv
intel_rapl_common 24576 2 intel_rapl_msr,processor_thermal_device
intel_rapl_msr 20480 0
intel_rapl_perf 20480 0
intel_soc_dts_iosf 20480 1 processor_thermal_device
intel_telemetry_core 16384 1 intel_telemetry_pltdrv
intel_telemetry_pltdrv 20480 0
ip_tables 32768 0
isofs 49152 1
iwlwifi 331776 0
joydev 24576 0
kfifo_buf 16384 1 industrialio_triggered_buffer
kvm 663552 1 kvm_intel
kvm_intel 282624 0
kxcjk_1013 28672 0
ledtrig_audio 16384 3 snd_hda_codec_generic,snd_hda_codec_realtek,snd_sof
libahci 32768 1 ahci
lp 20480 0
mac_hid 16384 0
mc 53248 4 videodev,videobuf2_v4l2,uvcvideo,videobuf2_common
mei 106496 3 mei_hdcp,mei_me
mei_hdcp 24576 0
mei_me 40960 1
memstick 20480 1 rtsx_usb_ms
mmc_block 49152 4
nls_iso8859_1 16384 1
nls_utf8 16384 1
overlay 114688 1
parport 53248 3 parport_pc,lp,ppdev
parport_pc 40960 0
pinctrl_geminilake 24576 1
pinctrl_intel 28672 1 pinctrl_geminilake
ppdev 24576 0
processor_thermal_device 24576 0
rfcomm 81920 16
rtsx_usb 28672 2 rtsx_usb_sdmmc,rtsx_usb_ms
rtsx_usb_ms 24576 0
rtsx_usb_sdmmc 32768 0
sch_fq_codel 20480 2
sdhci 65536 1 sdhci_pci
sdhci_pci 53248 0
serio_raw 20480 0
snd 90112 19 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_compress,snd_soc_core,snd_pcm,snd_rawmidi
snd_compress 24576 1 snd_soc_core
snd_hda_codec 131072 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek,snd_soc_hdac_hda
snd_hda_codec_generic 81920 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 61440 1
snd_hda_codec_realtek 122880 1
snd_hda_core 90112 9 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_hda_codec_realtek,snd_sof_intel_hda_common,snd_soc_hdac_hda,snd_sof_intel_hda
snd_hda_ext_core 28672 3 snd_sof_intel_hda_common,snd_soc_hdac_hda,snd_sof_intel_hda
snd_hda_intel 53248 3
snd_hwdep 20480 1 snd_hda_codec
snd_intel_dspcfg 24576 3 snd_hda_intel,snd_sof_pci,snd_sof_intel_hda_common
snd_pcm 106496 8 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_sof,snd_sof_intel_hda_common,snd_soc_core,snd_hda_core,snd_pcm_dmaengine
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_rawmidi 36864 1 snd_seq_midi
snd_seq 69632 2 snd_seq_midi,snd_seq_midi_event
snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi
snd_seq_midi 20480 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_soc_acpi 16384 2 snd_sof_pci,snd_soc_acpi_intel_match
snd_soc_acpi_intel_match 32768 2 snd_sof_pci,snd_sof_intel_hda_common
snd_soc_core 245760 3 snd_sof,snd_sof_intel_hda_common,snd_soc_hdac_hda
snd_soc_hdac_hda 24576 1 snd_sof_intel_hda_common
snd_sof 106496 4 snd_sof_pci,snd_sof_intel_hda_common,snd_sof_intel_byt,snd_sof_intel_ipc
snd_sof_intel_byt 20480 1 snd_sof_pci
snd_sof_intel_hda 20480 1 snd_sof_intel_hda_common
snd_sof_intel_hda_common 69632 1 snd_sof_pci
snd_sof_intel_ipc 20480 1 snd_sof_intel_byt
snd_sof_pci 20480 0
snd_sof_xtensa_dsp 16384 1 snd_sof_pci
snd_timer 36864 2 snd_seq,snd_pcm
soundcore 16384 1 snd
sparse_keymap 16384 1 intel_hid
spi_pxa2xx_platform 28672 0
spl 126976 5 zfs,icp,znvpair,zcommon,zavl
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
uas 28672 0
usb_storage 77824 3 uas
usbhid 57344 0
uvcvideo 98304 0
video 49152 1 i915
videobuf2_common 49152 2 videobuf2_v4l2,uvcvideo
videobuf2_memops 20480 1 videobuf2_vmalloc
videobuf2_v4l2 24576 1 uvcvideo
videobuf2_vmalloc 20480 1 uvcvideo
videodev 225280 3 videobuf2_v4l2,uvcvideo,videobuf2_common
virt_dma 20480 1 idma64
x86_pkg_temp_thermal 20480 0
x_tables 40960 1 ip_tables
zavl 16384 1 zfs
zcommon 90112 2 zfs,icp
zfs 4030464 6
zlua 147456 1 zfs
znvpair 81920 2 zfs,zcommon
zunicode 331776 1 zfs>> iwconfig
>> ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: bnep0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
link/ether 68:ec:c5:d8:f8:87 brd ff:ff:ff:ff:ff:ff
inet 192.168.44.96/24 brd 192.168.44.255 scope global dynamic noprefixroute bnep0
valid_lft 3379sec preferred_lft 3379sec
inet6 fe80::1e40:2b4d:91b0:d95/64 scope link noprefixroute
valid_lft forever preferred_lft forever
>> sudo iwlist scan
>> uname -r -m
5.4.0-42-generic x86_64
>> cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d
>> nm-tool
>> nmcli dev wifi
>> nmcli connection list (< 15.04) ou nmcli connection show (>= 15.04)
NAME UUID TYPE DEVICE
FéenallaTEL<3❤ Network fad41241-1b61-4fc3-b3ed-3ee9c3419b3e bluetooth 84:BE:52:06:F6:AD
>> sudo rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: noHors ligne
#12 Le 28/12/2020, à 00:03
- Nuliel
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Par "ubuntu a planté", tu veux dire que le système a gelé, et plus rien ne répondait mais tu avais quand même un écran, et la souris ne bougeait plus? Si oui, à mon avis, il faudra limiter les cstates (j'avais fait une page là dessus: https://doc.ubuntu-fr.org/utilisateurs/ … processeur )
Pour le wifi, c'est très étrange. Peux tu vérifier que le secure boot est désactivé dans le bios? Dans le doute, tu peux aussi regarder les différentes options du bios (j'ai souvenir d'une option dans le bios utile sur les thomson mais je ne sais plus pour régler quel problème). L'idéal serait de prendre des photos des options.
Tu peux redémarrer et donner
dmesgLe retour est long, mais je cherche des traces d'erreurs.
Hors ligne
#13 Le 28/12/2020, à 22:47
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Bonsoir
Désolée de ne pas répondre avant mais boulot et là ce soir ça bug On dirait qu'il y a melange entre pavé tactile et écran tactile et tout ça avec un affichage à l'envers, que je ne parviens pas à remettre en place alors qu'hier j'y suis parvenue mais sais plus comment.
Bref je reprend tout ça demain ds la journée.
Bonne soirée 
Hors ligne
#14 Le 29/12/2020, à 11:37
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
bonjour
des photos bios
si besoin je fais d autres photos
Hors ligne
#15 Le 29/12/2020, à 11:45
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
par plante je voulais dire que la souris bougeait mais je ne pouvais rien faire.. style fermer un programme
oui le secure est sur disable
resultat commande
ubuntu@ubuntu:~$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x32, date = 2019-08-28
[ 0.000000] Linux version 5.4.0-42-generic (buildd@lgw01-amd64-038) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #46-Ubuntu SMP Fri Jul 10 00:24:02 UTC 2020 (Ubuntu 5.4.0-42.46-generic 5.4.44)
[ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed maybe-ubiquity quiet splash ---
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000003e000-0x000000000003ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000076287fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000076288000-0x0000000079a73fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079a74000-0x0000000079a96fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000079a97000-0x0000000079afffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079b00000-0x0000000079e52fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079e53000-0x000000007a791fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a792000-0x000000007a83dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a83e000-0x000000007abfffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ac00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x6fb41018-0x6fb51057] usable ==> usable
[ 0.000000] e820: update [mem 0x6fb41018-0x6fb51057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000003dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000003e000-0x000000000003ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000040000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000012151000-0x000000006fb41017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006fb41018-0x000000006fb51057] usable
[ 0.000000] reserve setup_data: [mem 0x000000006fb51058-0x0000000076287fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000076288000-0x0000000079a73fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000079a74000-0x0000000079a96fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000079a97000-0x0000000079afffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000079b00000-0x0000000079e52fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000079e53000-0x000000007a791fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007a792000-0x000000007a83dfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007a83e000-0x000000007abfffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007ac00000-0x000000007fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x79a7b000 ACPI=0x79a7b000 TPMFinalLog=0x79ace000 SMBIOS=0x79cff000 SMBIOS 3.0=0x79cfe000 ESRT=0x752c6298 MEMATTR=0x722df018 TPMEventLog=0x6fb52018
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: Thomson BE.HERO13C4GR32/Default string, BIOS KB-BI-13.3-S133GOR110-026-C 06/13/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1094.400 MHz processor
[ 0.000041] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000046] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000068] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000077] MTRR default type: uncachable
[ 0.000080] MTRR fixed ranges enabled:
[ 0.000083] 00000-9FFFF write-back
[ 0.000086] A0000-BFFFF uncachable
[ 0.000089] C0000-FFFFF write-protect
[ 0.000091] MTRR variable ranges enabled:
[ 0.000095] 0 base 00FF800000 mask 7FFF800000 write-combining
[ 0.000098] 1 base 0000000000 mask 7F80000000 write-back
[ 0.000101] 2 base 007B000000 mask 7FFF000000 uncachable
[ 0.000104] 3 base 007C000000 mask 7FFC000000 uncachable
[ 0.000106] 4 base 0100000000 mask 7F80000000 write-back
[ 0.000108] 5 disabled
[ 0.000110] 6 disabled
[ 0.000112] 7 disabled
[ 0.000113] 8 disabled
[ 0.000115] 9 disabled
[ 0.000258] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000375] last_pfn = 0x7ac00 max_arch_pfn = 0x400000000
[ 0.010642] esrt: Reserving ESRT space from 0x00000000752c6298 to 0x00000000752c62d0.
[ 0.010655] e820: update [mem 0x752c6000-0x752c6fff] usable ==> reserved
[ 0.010700] check: Scanning 1 areas for low memory corruption
[ 0.010710] Using GB pages for direct mapping
[ 0.010715] BRK [0x11c201000, 0x11c201fff] PGTABLE
[ 0.010721] BRK [0x11c202000, 0x11c202fff] PGTABLE
[ 0.010724] BRK [0x11c203000, 0x11c203fff] PGTABLE
[ 0.010977] BRK [0x11c204000, 0x11c204fff] PGTABLE
[ 0.011760] BRK [0x11c205000, 0x11c205fff] PGTABLE
[ 0.011985] BRK [0x11c206000, 0x11c206fff] PGTABLE
[ 0.012206] BRK [0x11c207000, 0x11c207fff] PGTABLE
[ 0.012538] BRK [0x11c208000, 0x11c208fff] PGTABLE
[ 0.012911] BRK [0x11c209000, 0x11c209fff] PGTABLE
[ 0.013155] BRK [0x11c20a000, 0x11c20afff] PGTABLE
[ 0.013719] secureboot: Secure boot disabled
[ 0.013722] RAMDISK: [mem 0x3a960000-0x3fffdfff]
[ 0.013747] ACPI: Early table checksum verification disabled
[ 0.013756] ACPI: RSDP 0x0000000079A7B000 000024 (v02 ALASKA)
[ 0.013764] ACPI: XSDT 0x0000000079A7B0C0 0000F4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.013779] ACPI: FACP 0x0000000079A878F0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.013793] ACPI: DSDT 0x0000000079A7B260 00C68A (v02 ALASKA A M I 01072009 INTL 20160930)
[ 0.013802] ACPI: FACS 0x0000000079AFF080 000040
[ 0.013808] ACPI: FPDT 0x0000000079A87A10 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.013815] ACPI: FIDT 0x0000000079A87A60 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.013823] ACPI: MSDM 0x0000000079A87B00 000055 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.013830] ACPI: MCFG 0x0000000079A87B60 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.013838] ACPI: HPET 0x0000000079A87BA0 000038 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.013845] ACPI: LPIT 0x0000000079A87BE0 00005C (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.013853] ACPI: APIC 0x0000000079A87C40 000084 (v03 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.013860] ACPI: NPKT 0x0000000079A87CD0 000065 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.013867] ACPI: SSDT 0x0000000079A87D40 003EDD (v02 INTEL DptfTab 00000003 BRXT 0100000D)
[ 0.013875] ACPI: SSDT 0x0000000079A8BC20 00478B (v02 INTEL RVPRtd3 00000003 BRXT 0100000D)
[ 0.013883] ACPI: SSDT 0x0000000079A903B0 000C8F (v02 INTEL UsbCTabl 00000003 BRXT 0100000D)
[ 0.013891] ACPI: SSDT 0x0000000079A91040 0011B4 (v01 Intel_ Platform 00001000 INTL 20160930)
[ 0.013899] ACPI: SSDT 0x0000000079A92200 0000B1 (v01 Intel_ ADebTabl 00001000 INTL 20160930)
[ 0.013906] ACPI: SSDT 0x0000000079A922C0 000472 (v02 PmRef Cpu0Ist 00003000 INTL 20160930)
[ 0.013914] ACPI: SSDT 0x0000000079A92740 000775 (v02 CpuRef CpuSsdt 00003000 INTL 20160930)
[ 0.013922] ACPI: SSDT 0x0000000079A92EC0 00035F (v02 PmRef Cpu0Tst 00003000 INTL 20160930)
[ 0.013930] ACPI: SSDT 0x0000000079A93220 0001E6 (v02 PmRef ApTst 00003000 INTL 20160930)
[ 0.013938] ACPI: SSDT 0x0000000079A93410 0028FE (v02 SaSsdt SaSsdt 00003000 INTL 20160930)
[ 0.013946] ACPI: UEFI 0x0000000079A95D10 000042 (v01 ALASKA A M I 00000002 01000013)
[ 0.013953] ACPI: BGRT 0x0000000079A95D60 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.013960] ACPI: TPM2 0x0000000079A95DA0 000034 (v03 ALASKA A M I 00000001 AMI 00000000)
[ 0.013968] ACPI: DBGP 0x0000000079A95DE0 000034 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.013975] ACPI: DBG2 0x0000000079A95E20 000072 (v00 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.013982] ACPI: WDAT 0x0000000079A95EA0 000104 (v01 00000000 00000000)
[ 0.013990] ACPI: WSMT 0x0000000079A95FB0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.014010] ACPI: Local APIC address 0xfee00000
[ 0.014447] No NUMA configuration found
[ 0.014450] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[ 0.014484] NODE_DATA(0) allocated [mem 0x17ffd5000-0x17fffffff]
[ 0.015343] Zone ranges:
[ 0.015345] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.015349] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.015352] Normal [mem 0x0000000100000000-0x000000017fffffff]
[ 0.015355] Device empty
[ 0.015357] Movable zone start for each node
[ 0.015365] Early memory node ranges
[ 0.015367] node 0: [mem 0x0000000000001000-0x000000000003dfff]
[ 0.015371] node 0: [mem 0x0000000000040000-0x000000000009dfff]
[ 0.015373] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.015375] node 0: [mem 0x0000000012151000-0x0000000076287fff]
[ 0.015377] node 0: [mem 0x0000000079e53000-0x000000007a791fff]
[ 0.015379] node 0: [mem 0x000000007a83e000-0x000000007abfffff]
[ 0.015381] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.016393] Zeroed struct page in unavailable ranges: 45613 pages
[ 0.016396] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[ 0.016400] On node 0 totalpages: 1002963
[ 0.016404] DMA zone: 64 pages used for memmap
[ 0.016405] DMA zone: 22 pages reserved
[ 0.016409] DMA zone: 3995 pages, LIFO batch:0
[ 0.016590] DMA32 zone: 7417 pages used for memmap
[ 0.016592] DMA32 zone: 474680 pages, LIFO batch:63
[ 0.048536] Normal zone: 8192 pages used for memmap
[ 0.048540] Normal zone: 524288 pages, LIFO batch:63
[ 0.070503] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.072313] ACPI: PM-Timer IO Port: 0x408
[ 0.072318] ACPI: Local APIC address 0xfee00000
[ 0.072337] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.072341] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.072343] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.072345] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.072385] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[ 0.072391] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.072395] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.072399] ACPI: IRQ0 used by override.
[ 0.072402] ACPI: IRQ9 used by override.
[ 0.072407] Using ACPI (MADT) for SMP configuration information
[ 0.072411] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.072432] e820: update [mem 0x7252f000-0x72b1dfff] usable ==> reserved
[ 0.072464] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.072540] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.072546] PM: Registered nosave memory: [mem 0x0003e000-0x0003ffff]
[ 0.072551] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.072556] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[ 0.072561] PM: Registered nosave memory: [mem 0x6fb41000-0x6fb41fff]
[ 0.072567] PM: Registered nosave memory: [mem 0x6fb51000-0x6fb51fff]
[ 0.072572] PM: Registered nosave memory: [mem 0x7252f000-0x72b1dfff]
[ 0.072578] PM: Registered nosave memory: [mem 0x752c6000-0x752c6fff]
[ 0.072583] PM: Registered nosave memory: [mem 0x76288000-0x79a73fff]
[ 0.072585] PM: Registered nosave memory: [mem 0x79a74000-0x79a96fff]
[ 0.072587] PM: Registered nosave memory: [mem 0x79a97000-0x79afffff]
[ 0.072589] PM: Registered nosave memory: [mem 0x79b00000-0x79e52fff]
[ 0.072595] PM: Registered nosave memory: [mem 0x7a792000-0x7a83dfff]
[ 0.072600] PM: Registered nosave memory: [mem 0x7ac00000-0x7fffffff]
[ 0.072602] PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]
[ 0.072604] PM: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
[ 0.072606] PM: Registered nosave memory: [mem 0xd1000000-0xd3708fff]
[ 0.072608] PM: Registered nosave memory: [mem 0xd3709000-0xd3709fff]
[ 0.072610] PM: Registered nosave memory: [mem 0xd370a000-0xdfffffff]
[ 0.072612] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.072614] PM: Registered nosave memory: [mem 0xf0000000-0xfe041fff]
[ 0.072615] PM: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
[ 0.072617] PM: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
[ 0.072619] PM: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
[ 0.072621] PM: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
[ 0.072623] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.072625] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ 0.072627] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.072628] PM: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
[ 0.072630] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.072632] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.072634] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.072639] [mem 0x80000000-0xcfffffff] available for PCI devices
[ 0.072642] Booting paravirtualized kernel on bare hardware
[ 0.072650] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.072672] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.073360] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.073383] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.073386] pcpu-alloc: [0] 0 1 2 3
[ 0.073487] Built 1 zonelists, mobility grouping on. Total pages: 987268
[ 0.073489] Policy zone: Normal
[ 0.073493] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed maybe-ubiquity quiet splash ---
[ 0.074772] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.075261] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.075364] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.091404] Calgary: detecting Calgary via BIOS EBDA area
[ 0.091407] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.119351] Memory: 3718708K/4011852K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 293144K reserved, 0K cma-reserved)
[ 0.119370] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.119748] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.119786] Kernel/User page tables isolation: enabled
[ 0.119822] ftrace: allocating 44488 entries in 174 pages
[ 0.162714] rcu: Hierarchical RCU implementation.
[ 0.162719] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.162722] Tasks RCU enabled.
[ 0.162724] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.162726] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.172918] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.173750] random: crng done (trusting CPU's manufacturer)
[ 0.173816] Console: colour dummy device 80x25
[ 0.173827] printk: console [tty0] enabled
[ 0.173871] ACPI: Core revision 20190816
[ 0.174481] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[ 0.174588] APIC: Switch to symmetric I/O mode setup
[ 0.175975] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.181155] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.198538] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
[ 0.198549] Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=4377600)
[ 0.198555] pid_max: default: 32768 minimum: 301
[ 0.202577] LSM: Security Framework initializing
[ 0.202608] Yama: becoming mindful.
[ 0.202692] AppArmor: AppArmor initialized
[ 0.202799] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.202819] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.202857] *** VALIDATE tmpfs ***
[ 0.203257] *** VALIDATE proc ***
[ 0.203403] *** VALIDATE cgroup1 ***
[ 0.203407] *** VALIDATE cgroup2 ***
[ 0.203509] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.203576] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.203646] process: using mwait in idle threads
[ 0.203652] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.203654] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.203660] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.203666] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.203668] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.203673] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.203676] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.204218] Freeing SMP alternatives memory: 40K
[ 0.208544] smpboot: CPU0: Intel(R) Celeron(R) N4000 CPU @ 1.10GHz (family: 0x6, model: 0x7a, stepping: 0x1)
[ 0.208926] Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.208940] ... version: 4
[ 0.208941] ... bit width: 48
[ 0.208943] ... generic registers: 4
[ 0.208945] ... value mask: 0000ffffffffffff
[ 0.208946] ... max period: 00007fffffffffff
[ 0.208947] ... fixed-purpose events: 3
[ 0.208949] ... event mask: 000000070000000f
[ 0.209045] rcu: Hierarchical SRCU implementation.
[ 0.210544] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.210544] smp: Bringing up secondary CPUs ...
[ 0.210544] x86: Booting SMP configuration:
[ 0.210544] .... node #0, CPUs: #1
[ 0.213410] smp: Brought up 1 node, 2 CPUs
[ 0.213410] smpboot: Max logical packages: 2
[ 0.213410] smpboot: Total of 2 processors activated (4377.60 BogoMIPS)
[ 0.214617] devtmpfs: initialized
[ 0.214697] x86/mm: Memory block size: 128MB
[ 0.215975] PM: Registering ACPI NVS region [mem 0x79a97000-0x79afffff] (430080 bytes)
[ 0.215975] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.215975] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.215975] pinctrl core: initialized pinctrl subsystem
[ 0.215975] PM: RTC time: 08:11:58, date: 2020-12-29
[ 0.215975] NET: Registered protocol family 16
[ 0.215975] audit: initializing netlink subsys (disabled)
[ 0.215975] audit: type=2000 audit(1609229518.040:1): state=initialized audit_enabled=0 res=1
[ 0.215975] EISA bus registered
[ 0.215975] cpuidle: using governor ladder
[ 0.215975] cpuidle: using governor menu
[ 0.215975] ACPI: bus type PCI registered
[ 0.215975] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.215975] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.215975] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.218563] PCI: Using configuration type 1 for base access
[ 0.223067] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.223067] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.230787] ACPI: Added _OSI(Module Device)
[ 0.230789] ACPI: Added _OSI(Processor Device)
[ 0.230791] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.230793] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.230796] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.230798] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.230801] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.278221] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.288834] ACPI: Dynamic OEM Table Load:
[ 0.288851] ACPI: SSDT 0xFFFF97063AADF400 000190 (v02 PmRef Cpu0Cst 00003001 INTL 20160930)
[ 0.291864] ACPI: Dynamic OEM Table Load:
[ 0.291878] ACPI: SSDT 0xFFFF97063A81C000 0001E6 (v02 PmRef ApIst 00003000 INTL 20160930)
[ 0.292574] ACPI: Dynamic OEM Table Load:
[ 0.292587] ACPI: SSDT 0xFFFF97063B366700 0000C9 (v02 PmRef ApCst 00003000 INTL 20160930)
[ 0.296316] ACPI: EC: EC started
[ 0.296318] ACPI: EC: interrupt blocked
[ 0.410794] ACPI: \_SB_.PCI0.SBRG.H_EC: Used as first EC
[ 0.410799] ACPI: \_SB_.PCI0.SBRG.H_EC: GPE=0x26, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.410803] ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC used to handle transactions
[ 0.410804] ACPI: Interpreter enabled
[ 0.410888] ACPI: (supports S0 S3 S4 S5)
[ 0.410890] ACPI: Using IOAPIC for interrupt routing
[ 0.410998] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.412319] ACPI: Enabled 11 GPEs in block 00 to 7F
[ 0.418002] ACPI: Power Resource [SPPR] (on)
[ 0.418584] ACPI: Power Resource [SPPR] (on)
[ 0.419406] ACPI: Power Resource [UPPR] (on)
[ 0.419880] ACPI: Power Resource [BTPR] (on)
[ 0.420600] ACPI: Power Resource [UPPR] (on)
[ 0.421005] ACPI: Power Resource [UPPR] (on)
[ 0.421867] ACPI: Power Resource [PX07] (off)
[ 0.423629] ACPI: Power Resource [BTPR] (on)
[ 0.424442] ACPI: Power Resource [UPPR] (on)
[ 0.424955] ACPI: Power Resource [UPPR] (on)
[ 0.425365] ACPI: Power Resource [UPPR] (on)
[ 0.425936] ACPI: Power Resource [USBC] (on)
[ 0.426295] ACPI: Power Resource [LSPR] (on)
[ 0.432879] ACPI: Power Resource [SDPR] (on)
[ 0.459278] ACPI: Power Resource [PXP] (off)
[ 0.460983] ACPI: Power Resource [DRST] (on)
[ 0.461693] ACPI: Power Resource [PXP] (on)
[ 0.607682] ACPI: Power Resource [DRST] (on)
[ 0.608363] ACPI: Power Resource [PXP] (on)
[ 0.635684] ACPI: Power Resource [DRST] (on)
[ 0.636165] ACPI: Power Resource [PXP] (off)
[ 0.637467] ACPI: Power Resource [DRST] (on)
[ 0.638168] ACPI: Power Resource [PXP] (off)
[ 0.639894] ACPI: Power Resource [DRST] (on)
[ 0.640601] ACPI: Power Resource [PXP] (on)
[ 0.667695] ACPI: Power Resource [DRST] (on)
[ 0.669171] ACPI: Power Resource [WRST] (on)
[ 0.670021] ACPI: Power Resource [PAUD] (on)
[ 0.683449] ACPI: Power Resource [FN00] (on)
[ 0.685641] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.685659] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.688857] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.689324] acpi PNP0A08:00: host bridge window [mem 0x1000000010000 window] (ignored, not CPU addressable)
[ 0.691480] PCI host bridge to bus 0000:00
[ 0.691486] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.691489] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.691493] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.691496] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.691499] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.691502] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.691505] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.691509] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[ 0.691512] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
[ 0.691515] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[ 0.691518] pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
[ 0.691521] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
[ 0.691524] pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
[ 0.691527] pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
[ 0.691530] pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
[ 0.691533] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
[ 0.691536] pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
[ 0.691539] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
[ 0.691542] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
[ 0.691548] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.691577] pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
[ 0.692535] pci 0000:00:00.1: [8086:318c] type 00 class 0x118000
[ 0.692598] pci 0000:00:00.1: reg 0x10: [mem 0x80000000-0x80007fff 64bit]
[ 0.693598] pci 0000:00:02.0: [8086:3185] type 00 class 0x030000
[ 0.693621] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[ 0.693633] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.693641] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.693675] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.694673] pci 0000:00:0e.0: [8086:3198] type 00 class 0x040300
[ 0.694725] pci 0000:00:0e.0: reg 0x10: [mem 0xa1210000-0xa1213fff 64bit]
[ 0.694764] pci 0000:00:0e.0: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit]
[ 0.694851] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[ 0.696550] pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000
[ 0.696608] pci 0000:00:0f.0: reg 0x10: [mem 0xa1239000-0xa1239fff 64bit]
[ 0.696765] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.697677] pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601
[ 0.697708] pci 0000:00:12.0: reg 0x10: [mem 0xa1214000-0xa1215fff]
[ 0.697740] pci 0000:00:12.0: reg 0x14: [mem 0xa1238000-0xa12380ff]
[ 0.697752] pci 0000:00:12.0: reg 0x18: [io 0xf090-0xf097]
[ 0.697765] pci 0000:00:12.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.697778] pci 0000:00:12.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.697791] pci 0000:00:12.0: reg 0x24: [mem 0xa1237000-0xa12377ff]
[ 0.697858] pci 0000:00:12.0: PME# supported from D3hot
[ 0.698800] pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400
[ 0.698966] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 0.699899] pci 0000:00:13.2: [8086:31da] type 01 class 0x060400
[ 0.700045] pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
[ 0.700967] pci 0000:00:13.3: [8086:31db] type 01 class 0x060400
[ 0.701120] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
[ 0.702054] pci 0000:00:14.0: [8086:31d6] type 01 class 0x060400
[ 0.702181] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[ 0.703083] pci 0000:00:14.1: [8086:31d7] type 01 class 0x060400
[ 0.703227] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
[ 0.704163] pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
[ 0.704196] pci 0000:00:15.0: reg 0x10: [mem 0xa1200000-0xa120ffff 64bit]
[ 0.704292] pci 0000:00:15.0: PME# supported from D3hot D3cold
[ 0.705183] pci 0000:00:16.0: [8086:31ac] type 00 class 0x118000
[ 0.705223] pci 0000:00:16.0: reg 0x10: [mem 0xa1236000-0xa1236fff 64bit]
[ 0.705242] pci 0000:00:16.0: reg 0x18: [mem 0xa1235000-0xa1235fff 64bit]
[ 0.706180] pci 0000:00:16.1: [8086:31ae] type 00 class 0x118000
[ 0.706233] pci 0000:00:16.1: reg 0x10: [mem 0xa1234000-0xa1234fff 64bit]
[ 0.706252] pci 0000:00:16.1: reg 0x18: [mem 0xa1233000-0xa1233fff 64bit]
[ 0.707194] pci 0000:00:16.2: [8086:31b0] type 00 class 0x118000
[ 0.707234] pci 0000:00:16.2: reg 0x10: [mem 0xa1232000-0xa1232fff 64bit]
[ 0.707253] pci 0000:00:16.2: reg 0x18: [mem 0xa1231000-0xa1231fff 64bit]
[ 0.708189] pci 0000:00:16.3: [8086:31b2] type 00 class 0x118000
[ 0.708227] pci 0000:00:16.3: reg 0x10: [mem 0xa1230000-0xa1230fff 64bit]
[ 0.708246] pci 0000:00:16.3: reg 0x18: [mem 0xa122f000-0xa122ffff 64bit]
[ 0.709246] pci 0000:00:17.0: [8086:31b4] type 00 class 0x118000
[ 0.709286] pci 0000:00:17.0: reg 0x10: [mem 0xa122e000-0xa122efff 64bit]
[ 0.709304] pci 0000:00:17.0: reg 0x18: [mem 0xa122d000-0xa122dfff 64bit]
[ 0.710245] pci 0000:00:17.1: [8086:31b6] type 00 class 0x118000
[ 0.710283] pci 0000:00:17.1: reg 0x10: [mem 0xa122c000-0xa122cfff 64bit]
[ 0.710302] pci 0000:00:17.1: reg 0x18: [mem 0xa122b000-0xa122bfff 64bit]
[ 0.711249] pci 0000:00:17.2: [8086:31b8] type 00 class 0x118000
[ 0.711288] pci 0000:00:17.2: reg 0x10: [mem 0xa122a000-0xa122afff 64bit]
[ 0.711307] pci 0000:00:17.2: reg 0x18: [mem 0xa1229000-0xa1229fff 64bit]
[ 0.712273] pci 0000:00:17.3: [8086:31ba] type 00 class 0x118000
[ 0.712312] pci 0000:00:17.3: reg 0x10: [mem 0xa1228000-0xa1228fff 64bit]
[ 0.712329] pci 0000:00:17.3: reg 0x18: [mem 0xa1227000-0xa1227fff 64bit]
[ 0.713282] pci 0000:00:18.0: [8086:31bc] type 00 class 0x118000
[ 0.713322] pci 0000:00:18.0: reg 0x10: [mem 0xa1226000-0xa1226fff 64bit]
[ 0.713340] pci 0000:00:18.0: reg 0x18: [mem 0xa1225000-0xa1225fff 64bit]
[ 0.714281] pci 0000:00:18.1: [8086:31be] type 00 class 0x118000
[ 0.714319] pci 0000:00:18.1: reg 0x10: [mem 0xa1224000-0xa1224fff 64bit]
[ 0.714337] pci 0000:00:18.1: reg 0x18: [mem 0xa1223000-0xa1223fff 64bit]
[ 0.715297] pci 0000:00:18.3: [8086:31ee] type 00 class 0x118000
[ 0.715335] pci 0000:00:18.3: reg 0x10: [mem 0xa1222000-0xa1222fff 64bit]
[ 0.715354] pci 0000:00:18.3: reg 0x18: [mem 0xa1221000-0xa1221fff 64bit]
[ 0.716310] pci 0000:00:19.0: [8086:31c2] type 00 class 0x118000
[ 0.716348] pci 0000:00:19.0: reg 0x10: [mem 0xa1220000-0xa1220fff 64bit]
[ 0.716365] pci 0000:00:19.0: reg 0x18: [mem 0xa121f000-0xa121ffff 64bit]
[ 0.717304] pci 0000:00:19.1: [8086:31c4] type 00 class 0x118000
[ 0.717344] pci 0000:00:19.1: reg 0x10: [mem 0xa121e000-0xa121efff 64bit]
[ 0.717362] pci 0000:00:19.1: reg 0x18: [mem 0xa121d000-0xa121dfff 64bit]
[ 0.718329] pci 0000:00:19.2: [8086:31c6] type 00 class 0x118000
[ 0.718366] pci 0000:00:19.2: reg 0x10: [mem 0xa121c000-0xa121cfff 64bit]
[ 0.718385] pci 0000:00:19.2: reg 0x18: [mem 0xa121b000-0xa121bfff 64bit]
[ 0.719352] pci 0000:00:1c.0: [8086:31cc] type 00 class 0x080501
[ 0.719388] pci 0000:00:1c.0: reg 0x10: [mem 0xa121a000-0xa121afff 64bit]
[ 0.719408] pci 0000:00:1c.0: reg 0x18: [mem 0xa1219000-0xa1219fff 64bit]
[ 0.720447] pci 0000:00:1e.0: [8086:31d0] type 00 class 0x080501
[ 0.720483] pci 0000:00:1e.0: reg 0x10: [mem 0xa1218000-0xa1218fff 64bit]
[ 0.720501] pci 0000:00:1e.0: reg 0x18: [mem 0xa1217000-0xa1217fff 64bit]
[ 0.721441] pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100
[ 0.722580] pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
[ 0.722656] pci 0000:00:1f.1: reg 0x10: [mem 0xa1216000-0xa12160ff 64bit]
[ 0.722742] pci 0000:00:1f.1: reg 0x20: [io 0xf040-0xf05f]
[ 0.724248] pci 0000:01:00.0: [8086:3165] type 00 class 0x028000
[ 0.724590] pci 0000:01:00.0: reg 0x10: [mem 0xa1100000-0xa1101fff 64bit]
[ 0.724877] pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
[ 0.725030] pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
[ 0.725800] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.727231] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.727247] pci 0000:00:13.0: bridge window [mem 0xa1100000-0xa11fffff]
[ 0.727381] pci 0000:00:13.2: PCI bridge to [bus 02]
[ 0.727501] pci 0000:00:13.3: PCI bridge to [bus 03]
[ 0.727619] pci 0000:00:14.0: PCI bridge to [bus 04]
[ 0.727729] pci 0000:00:14.1: PCI bridge to [bus 05]
[ 0.737463] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.737731] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.737990] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.738247] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 10 11 12 14 15)
[ 0.738503] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.738774] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *9
[ 0.739032] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.739288] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.742550] ACPI Warning: GPE type mismatch (level/edge) (20190816/evxface-791)
[ 0.742550] ACPI: EC: interrupt unblocked
[ 0.742580] ACPI: EC: event unblocked
[ 0.742610] ACPI: \_SB_.PCI0.SBRG.H_EC: GPE=0x26, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.742615] ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC used to handle transactions and events
[ 0.742902] iommu: Default domain type: Translated
[ 0.743045] SCSI subsystem initialized
[ 0.746589] libata version 3.00 loaded.
[ 0.746616] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.746616] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.746616] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.746616] vgaarb: loaded
[ 0.746631] ACPI: bus type USB registered
[ 0.746665] usbcore: registered new interface driver usbfs
[ 0.746686] usbcore: registered new interface driver hub
[ 0.746720] usbcore: registered new device driver usb
[ 0.746801] pps_core: LinuxPPS API ver. 1 registered
[ 0.746802] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.746809] PTP clock support registered
[ 0.746881] EDAC MC: Ver: 3.0.0
[ 0.746993] Registered efivars operations
[ 0.746993] PCI: Using ACPI for IRQ routing
[ 0.778348] PCI: pci_cache_line_size set to 64 bytes
[ 0.778851] e820: reserve RAM buffer [mem 0x0003e000-0x0003ffff]
[ 0.778854] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.778856] e820: reserve RAM buffer [mem 0x6fb41018-0x6fffffff]
[ 0.778858] e820: reserve RAM buffer [mem 0x7252f000-0x73ffffff]
[ 0.778860] e820: reserve RAM buffer [mem 0x752c6000-0x77ffffff]
[ 0.778862] e820: reserve RAM buffer [mem 0x76288000-0x77ffffff]
[ 0.778864] e820: reserve RAM buffer [mem 0x7a792000-0x7bffffff]
[ 0.778866] e820: reserve RAM buffer [mem 0x7ac00000-0x7bffffff]
[ 0.779138] NetLabel: Initializing
[ 0.779140] NetLabel: domain hash size = 128
[ 0.779141] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.779188] NetLabel: unlabeled traffic allowed by default
[ 0.779228] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.779228] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[ 0.782551] clocksource: Switched to clocksource tsc-early
[ 0.819332] *** VALIDATE bpf ***
[ 0.819508] VFS: Disk quotas dquot_6.6.0
[ 0.819553] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.819629] *** VALIDATE ramfs ***
[ 0.819637] *** VALIDATE hugetlbfs ***
[ 0.819857] AppArmor: AppArmor Filesystem Enabled
[ 0.819931] pnp: PnP ACPI init
[ 0.820310] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.820315] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 0.820319] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 0.820322] system 00:00: [io 0x0600-0x061f] has been reserved
[ 0.820326] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.820342] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.822759] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.822764] system 00:01: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.822768] system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.822772] system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.822775] system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.822779] system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved
[ 0.822782] system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved
[ 0.822786] system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.822790] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.822801] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.822911] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.823607] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.824941] pnp: PnP ACPI: found 4 devices
[ 0.829128] thermal_sys: Registered thermal governor 'fair_share'
[ 0.829129] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.829132] thermal_sys: Registered thermal governor 'step_wise'
[ 0.829133] thermal_sys: Registered thermal governor 'user_space'
[ 0.829135] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.833637] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.833744] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.833774] pci 0000:00:13.0: bridge window [mem 0xa1100000-0xa11fffff]
[ 0.833787] pci 0000:00:13.2: PCI bridge to [bus 02]
[ 0.833801] pci 0000:00:13.3: PCI bridge to [bus 03]
[ 0.833814] pci 0000:00:14.0: PCI bridge to [bus 04]
[ 0.833828] pci 0000:00:14.1: PCI bridge to [bus 05]
[ 0.833845] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.833849] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.833852] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.833855] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.833859] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.833862] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.833865] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.833868] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[ 0.833871] pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window]
[ 0.833874] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window]
[ 0.833878] pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window]
[ 0.833881] pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window]
[ 0.833884] pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window]
[ 0.833887] pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window]
[ 0.833890] pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window]
[ 0.833893] pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window]
[ 0.833896] pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window]
[ 0.833899] pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window]
[ 0.833902] pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window]
[ 0.833906] pci_bus 0000:01: resource 1 [mem 0xa1100000-0xa11fffff]
[ 0.834269] NET: Registered protocol family 2
[ 0.834741] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.834816] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.835045] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.835171] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.835250] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.835299] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.835411] NET: Registered protocol family 1
[ 0.835422] NET: Registered protocol family 44
[ 0.835452] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.836383] PCI: CLS 64 bytes, default 64
[ 0.836498] Trying to unpack rootfs image as initramfs...
[ 1.516216] Initramfs unpacking failed: Decoding failed
[ 1.516239] fbcon: Taking over console
[ 1.544947] Freeing initrd memory: 88696K
[ 1.544954] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.544958] software IO TLB: mapped [mem 0x6bb3f000-0x6fb3f000] (64MB)
[ 1.545156] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
[ 1.545182] clocksource: Switched to clocksource tsc
[ 1.545357] check: Scanning for low memory corruption every 60 seconds
[ 1.551949] Initialise system trusted keyrings
[ 1.551979] Key type blacklist registered
[ 1.552068] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.555586] zbud: loaded
[ 1.556484] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.556900] fuse: init (API version 7.31)
[ 1.556952] *** VALIDATE fuse ***
[ 1.556956] *** VALIDATE fuse ***
[ 1.557201] Platform Keyring initialized
[ 1.569577] Key type asymmetric registered
[ 1.569580] Asymmetric key parser 'x509' registered
[ 1.569604] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 1.569702] io scheduler mq-deadline registered
[ 1.570672] pcieport 0000:00:13.0: PME: Signaling with IRQ 120
[ 1.571200] pcieport 0000:00:13.2: PME: Signaling with IRQ 121
[ 1.571721] pcieport 0000:00:13.3: PME: Signaling with IRQ 122
[ 1.572208] pcieport 0000:00:14.0: PME: Signaling with IRQ 123
[ 1.572689] pcieport 0000:00:14.1: PME: Signaling with IRQ 124
[ 1.572863] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.573033] efifb: probing for efifb
[ 1.573093] efifb: showing boot graphics
[ 1.595574] efifb: framebuffer at 0x90000000, using 14400k, total 14400k
[ 1.595579] efifb: mode is 2560x1440x32, linelength=10240, pages=1
[ 1.595580] efifb: scrolling: redraw
[ 1.595584] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.595902] Console: switching to colour frame buffer device 160x45
[ 1.622121] fb0: EFI VGA frame buffer device
[ 1.622155] intel_idle: MWAIT substates: 0x11242020
[ 1.622158] intel_idle: v0.4.1 model 0x7A
[ 1.622448] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.625805] ACPI: AC Adapter [ADP1] (off-line)
[ 1.625964] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/PNP0C09:00/PNP0C0D:00/input/input0
[ 1.626053] ACPI: Lid Switch [LID0]
[ 1.626169] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.626211] ACPI: Power Button [PWRB]
[ 1.632696] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.632699] ACPI: Thermal Zone [TZ01] (29 C)
[ 1.633741] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.641831] Linux agpgart interface v0.103
[ 1.658672] loop: module loaded
[ 1.659831] libphy: Fixed MDIO Bus: probed
[ 1.659833] tun: Universal TUN/TAP device driver, 1.6
[ 1.659917] PPP generic driver version 2.4.2
[ 1.660052] VFIO - User Level meta-driver version: 0.3
[ 1.660225] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.660231] ehci-pci: EHCI PCI platform driver
[ 1.660259] ehci-platform: EHCI generic platform driver
[ 1.660284] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.660288] ohci-pci: OHCI PCI platform driver
[ 1.660309] ohci-platform: OHCI generic platform driver
[ 1.660324] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.660792] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 1.660806] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[ 1.662007] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 1.662017] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[ 1.662377] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.662381] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.662385] usb usb1: Product: xHCI Host Controller
[ 1.662388] usb usb1: Manufacturer: Linux 5.4.0-42-generic xhci-hcd
[ 1.662391] usb usb1: SerialNumber: 0000:00:15.0
[ 1.662654] hub 1-0:1.0: USB hub found
[ 1.662680] hub 1-0:1.0: 9 ports detected
[ 1.678066] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.678650] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 1.678659] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[ 1.678666] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
[ 1.678753] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.678756] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.678759] usb usb2: Product: xHCI Host Controller
[ 1.678762] usb usb2: Manufacturer: Linux 5.4.0-42-generic xhci-hcd
[ 1.678765] usb usb2: SerialNumber: 0000:00:15.0
[ 1.678990] hub 2-0:1.0: USB hub found
[ 1.679014] hub 2-0:1.0: 7 ports detected
[ 1.682905] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.682908] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.688217] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.688496] mousedev: PS/2 mouse device common for all mice
[ 1.688891] rtc_cmos 00:03: RTC can wake from S4
[ 1.689593] rtc_cmos 00:03: registered as rtc0
[ 1.689627] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.689641] i2c /dev entries driver
[ 1.689742] device-mapper: uevent: version 1.0.3
[ 1.689907] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 1.689950] platform eisa.0: Probing EISA bus 0
[ 1.689954] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.689957] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.689960] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.689963] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.689966] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.689969] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.689971] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.689974] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.689977] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.689979] platform eisa.0: EISA: Detected 0 cards
[ 1.689996] intel_pstate: Intel P-state driver initializing
[ 1.690239] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.690245] EFI Variables Facility v0.08 2004-May-17
[ 1.707267] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.723254] drop_monitor: Initializing network drop monitor service
[ 1.723464] NET: Registered protocol family 10
[ 1.736798] Segment Routing with IPv6
[ 1.736831] NET: Registered protocol family 17
[ 1.736890] Key type dns_resolver registered
[ 1.737197] RAS: Correctable Errors collector initialized.
[ 1.737245] microcode: sig=0x706a1, pf=0x1, revision=0x32
[ 1.737297] microcode: Microcode Update Driver: v2.2.
[ 1.737338] *** VALIDATE rdt ***
[ 1.737346] resctrl: L2 allocation detected
[ 1.737347] resctrl: L2DATA allocation detected
[ 1.737347] resctrl: L2CODE allocation detected
[ 1.737353] IPI shorthand broadcast: enabled
[ 1.737363] sched_clock: Marking stable (1736324897, 1001203)->(1742533881, -5207781)
[ 1.737477] registered taskstats version 1
[ 1.737492] Loading compiled-in X.509 certificates
[ 1.740802] Loaded X.509 cert 'Build time autogenerated kernel key: 9e1aeb581c5145b0cc48f50fdf6e09edec23120f'
[ 1.740841] zswap: loaded using pool lzo/zbud
[ 1.740928] Key type ._fscrypt registered
[ 1.740929] Key type .fscrypt registered
[ 1.753319] Key type big_key registered
[ 1.753325] Key type trusted registered
[ 1.759438] Key type encrypted registered
[ 1.759442] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.760904] integrity: Loading X.509 certificate: UEFI:db
[ 1.760952] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.760953] integrity: Loading X.509 certificate: UEFI:db
[ 1.760982] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.762895] ima: Allocated hash algorithm: sha1
[ 1.793074] ima: No architecture policies found
[ 1.793103] evm: Initialising EVM extended attributes:
[ 1.793105] evm: security.selinux
[ 1.793106] evm: security.SMACK64
[ 1.793107] evm: security.SMACK64EXEC
[ 1.793107] evm: security.SMACK64TRANSMUTE
[ 1.793107] evm: security.SMACK64MMAP
[ 1.793108] evm: security.apparmor
[ 1.793109] evm: security.ima
[ 1.793110] evm: security.capability
[ 1.793111] evm: HMAC attrs: 0x1
[ 1.794329] PM: Magic number: 0:680:170
[ 1.794455] acpi device:33: hash matches
[ 1.794703] rtc_cmos 00:03: setting system clock to 2020-12-29T08:12:00 UTC (1609229520)
[ 1.796420] Freeing unused decrypted memory: 2040K
[ 1.797213] Freeing unused kernel image memory: 2712K
[ 1.797283] Write protecting the kernel read-only data: 22528k
[ 1.798177] Freeing unused kernel image memory: 2008K
[ 1.798722] Freeing unused kernel image memory: 1192K
[ 1.812566] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.812620] x86/mm: Checking user space page tables
[ 1.826079] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.826084] Run /init as init process
[ 2.018568] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 2.047762] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.061502] ahci 0000:00:12.0: version 3.0
[ 2.061848] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.061851] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst
[ 2.069783] scsi host0: ahci
[ 2.079120] scsi host1: ahci
[ 2.079201] ata1: SATA max UDMA/133 abar m2048@0xa1237000 port 0xa1237100 irq 126
[ 2.079205] ata2: SATA max UDMA/133 abar m2048@0xa1237000 port 0xa1237180 irq 126
[ 2.093851] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 2.102538] sdhci: Secure Digital Host Controller Interface driver
[ 2.102539] sdhci: Copyright(c) Pierre Ossman
[ 2.105951] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:31cc] (rev 3)
[ 2.112812] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[ 2.112862] i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
[ 2.113107] mmc0: CQHCI version 5.10
[ 2.120100] mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
[ 2.120161] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:31d0] (rev 3)
[ 2.120172] sdhci-pci 0000:00:1e.0: enabling device (0000 -> 0002)
[ 2.123930] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 2.125692] mmc1: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit
[ 2.144415] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 2.166573] cryptd: max_cpu_qlen set to 1000
[ 2.172848] SSE version of gcm_enc/dec engaged.
[ 2.185155] usb 1-1: New USB device found, idVendor=13fe, idProduct=4200, bcdDevice= 1.00
[ 2.185158] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.185160] usb 1-1: Product: USB DISK 2.0
[ 2.185161] usb 1-1: Manufacturer:
[ 2.185163] usb 1-1: SerialNumber: C90046E83B781289
[ 2.186890] idma64 idma64.3: Found Intel integrated DMA 64-bit
[ 2.197460] idma64 idma64.4: Found Intel integrated DMA 64-bit
[ 2.212253] i2c_hid i2c-GDIX8500:00: i2c-GDIX8500:00 supply vdd not found, using dummy regulator
[ 2.212278] i2c_hid i2c-GDIX8500:00: i2c-GDIX8500:00 supply vddl not found, using dummy regulator
[ 2.214226] checking generic (90000000 e10000) vs hw (90000000 10000000)
[ 2.214228] fb0: switching to inteldrmfb from EFI VGA
[ 2.214390] Console: switching to colour dummy device 80x25
[ 2.214403] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.214512] [drm] couldn't get memory information
[ 2.214515] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.214516] [drm] Driver supports precise vblank timestamp query.
[ 2.214628] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.215495] [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
[ 2.240379] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 2.242231] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.242752] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 2.246177] idma64 idma64.5: Found Intel integrated DMA 64-bit
[ 2.251888] idma64 idma64.6: Found Intel integrated DMA 64-bit
[ 2.263275] idma64 idma64.7: Found Intel integrated DMA 64-bit
[ 2.269568] idma64 idma64.8: Found Intel integrated DMA 64-bit
[ 2.269610] mmc0: Command Queue Engine enabled
[ 2.269615] mmc0: new HS200 MMC card at address 0001
[ 2.270119] idma64 idma64.9: Found Intel integrated DMA 64-bit
[ 2.270970] idma64 idma64.11: Found Intel integrated DMA 64-bit
[ 2.271299] idma64 idma64.12: Found Intel integrated DMA 64-bit
[ 2.271658] idma64 idma64.13: Found Intel integrated DMA 64-bit
[ 2.317073] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 2.337606] input: GDIX8500:00 27C6:0101 Touchscreen as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX8500:00/0018:27C6:0101.0001/input/input4
[ 2.338020] input: GDIX8500:00 27C6:0101 as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX8500:00/0018:27C6:0101.0001/input/input5
[ 2.338111] input: GDIX8500:00 27C6:0101 Keyboard as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX8500:00/0018:27C6:0101.0001/input/input6
[ 2.338178] hid-generic 0018:27C6:0101.0001: input,hidraw0: I2C HID v1.00 Keyboard [GDIX8500:00 27C6:0101] on i2c-GDIX8500:00
[ 2.343498] mmcblk0: mmc0:0001 Biwin 28.8 GiB
[ 2.343593] mmcblk0boot0: mmc0:0001 Biwin partition 1 4.00 MiB
[ 2.343701] mmcblk0boot1: mmc0:0001 Biwin partition 2 4.00 MiB
[ 2.343756] mmcblk0rpmb: mmc0:0001 Biwin partition 3 4.00 MiB, chardev (239:0)
[ 2.393308] ata2: SATA link down (SStatus 4 SControl 300)
[ 2.393337] ata1: SATA link down (SStatus 4 SControl 300)
[ 2.414661] fbcon: i915drmfb (fb0) is primary device
[ 2.421156] mmcblk0: p1 p2 p3 p4
[ 2.421677] Console: switching to colour frame buffer device 160x45
[ 2.449119] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 2.466847] usb 1-4: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[ 2.466849] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.466851] usb 1-4: Product: USB2.0-CRW
[ 2.466853] usb 1-4: Manufacturer: Generic
[ 2.466854] usb 1-4: SerialNumber: 20100201396000000
[ 2.594576] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[ 2.744079] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 2.744082] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.874838] usb 1-8: new low-speed USB device number 5 using xhci_hcd
[ 3.032587] usb 1-8: New USB device found, idVendor=258a, idProduct=000c, bcdDevice= 1.00
[ 3.032592] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.032596] usb 1-8: Product: USB KEYBOARD
[ 3.032598] usb 1-8: Manufacturer: HAILUCK CO.,LTD
[ 3.044807] usbcore: registered new interface driver rtsx_usb
[ 3.045653] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 3.046057] scsi host2: usb-storage 1-1:1.0
[ 3.046143] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.0/0003:258A:000C.0002/input/input7
[ 3.046179] usbcore: registered new interface driver usb-storage
[ 3.047789] usbcore: registered new interface driver uas
[ 3.103165] hid-generic 0003:258A:000C.0002: input,hidraw1: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] on usb-0000:00:15.0-8/input0
[ 3.114447] input: HAILUCK CO.,LTD USB KEYBOARD Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.1/0003:258A:000C.0003/input/input8
[ 3.114614] input: HAILUCK CO.,LTD USB KEYBOARD System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.1/0003:258A:000C.0003/input/input9
[ 3.174915] input: HAILUCK CO.,LTD USB KEYBOARD Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.1/0003:258A:000C.0003/input/input10
[ 3.175007] input: HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.1/0003:258A:000C.0003/input/input11
[ 3.175230] hid-generic 0003:258A:000C.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-0000:00:15.0-8/input1
[ 3.175284] usbcore: registered new interface driver usbhid
[ 3.175285] usbhid: USB HID core driver
[ 3.701024] mmc2: new ultra high speed SDR50 SDHC card at address 59b4
[ 3.701531] mmcblk2: mmc2:59b4 SMI 29.5 GiB
[ 3.716081] mmcblk2: p1
[ 4.048452] scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
[ 4.048804] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 4.052386] sd 2:0:0:0: [sda] 15267823 512-byte logical blocks: (7.82 GB/7.28 GiB)
[ 4.054469] sd 2:0:0:0: [sda] Write Protect is off
[ 4.054472] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 4.055973] sd 2:0:0:0: [sda] No Caching mode page found
[ 4.055977] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 4.081189] sda: sda1 sda2 sda3
[ 4.088347] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 6.579257] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 6.583835] ISO 9660 Extensions: RRIP_1991A
[ 6.610880] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 6.612518] ISO 9660 Extensions: RRIP_1991A
[ 9.610946] EXT4-fs (sda3): recovery complete
[ 9.622096] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 202.783321] systemd[1]: Inserted module 'autofs4'
[ 202.874022] systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 202.891142] systemd[1]: Detected architecture x86-64.
[ 202.908703] systemd[1]: Set hostname to <ubuntu>.
[ 202.908950] systemd[1]: Initializing machine ID from random generator.
[ 203.121998] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 203.193508] systemd[1]: cdrom.mount: Unit is bound to inactive unit dev-sda1.device. Stopping, too.
[ 203.196336] systemd[1]: Created slice system-modprobe.slice.
[ 203.196730] systemd[1]: Created slice User and Session Slice.
[ 203.196853] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 203.197278] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 203.197329] systemd[1]: Reached target User and Group Name Lookups.
[ 203.197353] systemd[1]: Reached target Remote File Systems.
[ 203.197378] systemd[1]: Reached target Slices.
[ 203.197403] systemd[1]: Reached target Swap.
[ 203.197544] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 203.198085] systemd[1]: Listening on LVM2 poll daemon socket.
[ 203.198294] systemd[1]: Listening on Syslog Socket.
[ 203.198386] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 203.199040] systemd[1]: Listening on Journal Audit Socket.
[ 203.199205] systemd[1]: Listening on Journal Socket (/dev/log).
[ 203.199394] systemd[1]: Listening on udev Control Socket.
[ 203.199536] systemd[1]: Listening on udev Kernel Socket.
[ 203.200725] systemd[1]: Unmounting /cdrom...
[ 203.201705] systemd[1365]: cdrom.mount: Failed to connect stdout to the journal socket, ignoring: No such file or directory
[ 203.207021] systemd[1]: cdrom.mount: Mount process exited, code=exited, status=32/n/a
[ 203.207035] systemd[1]: Failed unmounting /cdrom.
[ 203.207549] systemd[1]: Listening on Journal Socket.
[ 203.209359] systemd[1]: Mounting Huge Pages File System...
[ 203.210938] systemd[1]: Mounting POSIX Message Queue File System...
[ 203.212594] systemd[1]: Mounting Kernel Debug File System...
[ 203.214245] systemd[1]: Mounting Kernel Trace File System...
[ 203.217268] systemd[1]: Starting Journal Service...
[ 203.221521] systemd[1]: Starting Availability of block devices...
[ 203.223733] systemd[1]: Starting Set the console keyboard layout...
[ 203.225602] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 203.227007] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 203.227083] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 203.231788] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 203.253091] systemd[1]: Starting Load Kernel Modules...
[ 203.263199] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 203.277155] systemd[1]: Starting udev Coldplug all Devices...
[ 203.284306] systemd[1]: Starting Uncomplicated firewall...
[ 203.327222] systemd[1]: Mounted Huge Pages File System.
[ 203.327517] systemd[1]: Mounted POSIX Message Queue File System.
[ 203.327741] systemd[1]: Mounted Kernel Debug File System.
[ 203.327960] systemd[1]: Mounted Kernel Trace File System.
[ 203.329094] systemd[1]: Finished Availability of block devices.
[ 203.330138] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 203.331120] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 203.332128] systemd[1]: Finished Uncomplicated firewall.
[ 203.333154] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 203.333209] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 203.339587] systemd[1]: Starting Create System Users...
[ 203.361371] lp: driver loaded but no devices found
[ 203.377544] systemd[1]: Finished Create System Users.
[ 203.380065] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 203.390266] ppdev: user-space parallel port driver
[ 203.401414] systemd[1]: Finished Load Kernel Modules.
[ 203.403529] systemd[1]: Mounting FUSE Control File System...
[ 203.413350] systemd[1]: Mounting Kernel Configuration File System...
[ 203.420562] systemd[1]: Starting Apply Kernel Variables...
[ 203.435536] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 203.436173] systemd[1]: Mounted FUSE Control File System.
[ 203.436901] systemd[1]: Mounted Kernel Configuration File System.
[ 203.450977] systemd[1]: Starting udev Kernel Device Manager...
[ 203.472915] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 203.480613] systemd[1]: Finished Apply Kernel Variables.
[ 203.533873] systemd[1]: Finished Set the console keyboard layout.
[ 203.534132] systemd[1]: Reached target Local File Systems (Pre).
[ 203.534241] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 203.535651] systemd[1]: Mounting /tmp...
[ 203.543417] systemd[1]: Mounted /tmp.
[ 203.651603] systemd[1]: Started udev Kernel Device Manager.
[ 203.745730] systemd[1]: Started Journal Service.
[ 203.770743] systemd-journald[1370]: Received client request to flush runtime journal.
[ 204.548645] input: Intel HID events as /devices/platform/INT33D5:00/input/input12
[ 204.550371] intel-hid INT33D5:00: platform supports 5 button array
[ 204.552978] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input13
[ 204.879162] proc_thermal 0000:00:00.1: Creating sysfs group for PROC_THERMAL_PCI
[ 205.006359] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 205.046766] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 205.051083] dw-apb-uart.8: ttyS4 at MMIO 0xa1226000 (irq = 4, base_baud = 115200) is a 16550A
[ 205.071079] dw-apb-uart.9: ttyS5 at MMIO 0xa1224000 (irq = 5, base_baud = 115200) is a 16550A
[ 205.091111] dw-apb-uart.10: ttyS6 at MMIO 0xa1222000 (irq = 7, base_baud = 115200) is a 16550A
[ 205.155040] Bluetooth: Core ver 2.22
[ 205.155063] NET: Registered protocol family 31
[ 205.155065] Bluetooth: HCI device and connection manager initialized
[ 205.155070] Bluetooth: HCI socket layer initialized
[ 205.155076] Bluetooth: L2CAP socket layer initialized
[ 205.155080] Bluetooth: SCO socket layer initialized
[ 205.200653] Intel(R) Wireless WiFi driver for Linux
[ 205.200655] Copyright(c) 2003- 2015 Intel Corporation
[ 205.279837] input: GDIX8500:00 27C6:0101 as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX8500:00/0018:27C6:0101.0001/input/input14
[ 205.282767] input: GDIX8500:00 27C6:0101 Stylus as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX8500:00/0018:27C6:0101.0001/input/input15
[ 205.288452] input: GDIX8500:00 27C6:0101 Keyboard as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX8500:00/0018:27C6:0101.0001/input/input16
[ 205.290779] hid-multitouch 0018:27C6:0101.0001: input,hidraw0: I2C HID v1.00 Keyboard [GDIX8500:00 27C6:0101] on i2c-GDIX8500:00
[ 205.308290] iwlwifi 0000:01:00.0: Refused to change power state, currently in D3
[ 205.310374] iwlwifi 0000:01:00.0: HW_REV=0xFFFFFFFF, PCI issues?
[ 205.329741] iwlwifi: probe of 0000:01:00.0 failed with error -5
[ 205.403093] usbcore: registered new interface driver btusb
[ 205.411916] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 205.411919] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 205.411920] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 205.411920] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 205.411921] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 205.421398] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 205.423054] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 205.687541] intel_telemetry_core Init
[ 205.715968] Invalid pltconfig, ensure IPC1 device is enabled in BIOS
[ 205.747023] Invalid pltconfig, ensure IPC1 device is enabled in BIOS
[ 205.753742] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[ 205.770775] Bluetooth: hci0: Intel firmware patch completed and activated
[ 205.866617] intel_rapl_common: Found RAPL domain package
[ 205.866620] intel_rapl_common: Found RAPL domain core
[ 205.866622] intel_rapl_common: Found RAPL domain uncore
[ 205.866624] intel_rapl_common: Found RAPL domain dram
[ 205.914919] mei_hdcp 0000:00:0f.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 206.001989] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 206.052780] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 206.052784] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 206.052785] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 206.052787] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 206.052788] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 206.052790] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 206.052791] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 206.095660] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input17
[ 206.095728] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input18
[ 206.095783] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input19
[ 206.095838] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input20
[ 206.095895] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input21
[ 206.095948] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input22
[ 206.096002] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input23
[ 206.677513] zlua: loading out-of-tree module taints kernel.
[ 206.677518] zlua: module license 'MIT' taints kernel.
[ 206.677519] Disabling lock debugging due to kernel taint
[ 208.404627] ZFS: Loaded module v0.8.3-1ubuntu12.1, ZFS pool version 5000, ZFS filesystem version 5
[ 209.805187] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 209.805189] Bluetooth: BNEP filters: protocol multicast
[ 209.805196] Bluetooth: BNEP socket layer initialized
[ 209.855306] NET: Registered protocol family 38
[ 212.123310] audit: type=1400 audit(1609229730.823:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1828 comm="apparmor_parser"
[ 212.123810] audit: type=1400 audit(1609229730.823:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1828 comm="apparmor_parser"
[ 221.291325] Bluetooth: RFCOMM TTY layer initialized
[ 221.291335] Bluetooth: RFCOMM socket layer initialized
[ 221.291342] Bluetooth: RFCOMM ver 1.11
[ 235.781122] audit: type=1400 audit(1609229754.479:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine" pid=2552 comm="apparmor_parser"
[ 235.781581] audit: type=1400 audit(1609229754.479:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2552 comm="apparmor_parser"
[ 285.351146] rfkill: input handler disabled
[ 308.535393] audit: type=1400 audit(1609229827.235:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine" pid=5738 comm="apparmor_parser"
[ 308.551069] audit: type=1400 audit(1609229827.255:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=5738 comm="apparmor_parser"
[ 319.818102] audit: type=1400 audit(1609229838.515:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.snap-store" pid=6049 comm="apparmor_parser"
[ 319.850334] audit: type=1400 audit(1609229838.547:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.snap-store" pid=6050 comm="apparmor_parser"
[ 319.992381] audit: type=1400 audit(1609229838.691:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=6051 comm="apparmor_parser"
[ 320.026644] audit: type=1400 audit(1609229838.727:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=6052 comm="apparmor_parser"
[ 321.793298] audit: type=1400 audit(1609229840.491:12): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine" pid=6083 comm="apparmor_parser"
[ 321.793303] audit: type=1400 audit(1609229840.491:13): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=6083 comm="apparmor_parser"
[ 323.046555] audit: type=1400 audit(1609229841.743:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.snap-store" pid=6086 comm="apparmor_parser"
[ 323.898162] audit: type=1400 audit(1609229842.595:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.snap-store" pid=6085 comm="apparmor_parser"
[ 324.268146] audit: type=1400 audit(1609229842.967:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=6108 comm="apparmor_parser"
[ 324.684681] audit: type=1400 audit(1609229843.383:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=6109 comm="apparmor_parser"
[ 325.702704] usb 1-5: new high-speed USB device number 6 using xhci_hcd
[ 325.890936] usb 1-5: New USB device found, idVendor=2145, idProduct=3822, bcdDevice= 6.03
[ 325.890943] usb 1-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 325.890948] usb 1-5: Product: USB 2.0 Camera
[ 325.946961] mc: Linux media interface: v0.10
[ 325.966467] videodev: Linux video capture interface: v2.00
[ 326.006323] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (2145:3822)
[ 326.037165] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 326.037169] uvcvideo 1-5:1.0: Entity type for entity Extension 6 was not initialized!
[ 326.037170] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 326.037453] input: USB 2.0 Camera : USB 2.0 Camera as /devices/pci0000:00/0000:00:15.0/usb1/1-5/1-5:1.0/input/input24
[ 326.040091] usbcore: registered new interface driver uvcvideo
[ 326.040093] USB Video Class driver (1.1.1)
[ 601.812106] input: FéenallaTEL<3❤ (AVRCP) as /devices/virtual/input/input25
[ 886.470786] Bluetooth: hci0: SCO packet for unknown connection handle 0
[ 886.470794] Bluetooth: hci0: SCO packet for unknown connection handle 0
[ 886.480753] Bluetooth: hci0: SCO packet for unknown connection handle 0
[ 886.480759] Bluetooth: hci0: SCO packet for unknown connection handle 0
[ 886.480761] Bluetooth: hci0: SCO packet for unknown connection handle 0
[ 886.490938] Bluetooth: hci0: SCO packet for unknown connection handle 0
[ 890.315073] Bluetooth: hci0: SCO packet for unknown connection handle 257
[ 890.315079] Bluetooth: hci0: SCO packet for unknown connection handle 257
[ 1378.954054] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 2430.546801] perf: interrupt took too long (3155 > 3133), lowering kernel.perf_event_max_sample_rate to 63250
[ 3698.478263] perf: interrupt took too long (3947 > 3943), lowering kernel.perf_event_max_sample_rate to 50500
[ 4571.913783] perf: interrupt took too long (4940 > 4933), lowering kernel.perf_event_max_sample_rate to 40250
ubuntu@ubuntu:~$ Dernière modification par mvb1 (Le 29/12/2020, à 11:47)
Hors ligne
#16 Le 29/12/2020, à 17:13
- Nuliel
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Oh, c'est pas un bios minimal ça!
[ 205.308290] iwlwifi 0000:01:00.0: Refused to change power state, currently in D3
[ 205.310374] iwlwifi 0000:01:00.0: HW_REV=0xFFFFFFFF, PCI issues?
[ 205.329741] iwlwifi: probe of 0000:01:00.0 failed with error -5eh bien on a le problème!
Bon, plus qu'à trouver le bon paramètre dans le bios. Tu peux montrer dans la catégorie advanced le contenu de PCI et des ACPI (j'aimerais bien savoir ce qui est sur le bus SIO)
Tu peux montrer
sudo fdisk -lHS: Par contre je me demande ce qui peut y avoir dans northbridge et southbridge (peut être un changement de voltage), c'est juste par curiosité
Dernière modification par Nuliel (Le 29/12/2020, à 17:26)
Hors ligne
#17 Le 29/12/2020, à 19:06
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Merci
les PCI et ACPI
Hors ligne
#18 Le 29/12/2020, à 19:15
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
ubuntu-mate@ubuntu-mate:~$ sudo fdisk -l
Disk /dev/loop0: 1.71 GiB, 1818759168 bytes, 3552264 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 29.9 MiB, 31334400 bytes, 61200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 54.98 MiB, 57626624 bytes, 112552 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 16 KiB, 16384 bytes, 32 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 14.89 MiB, 15589376 bytes, 30448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mmcblk0: 28.83 GiB, 30937186304 bytes, 60424192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 58FC3598-5CD7-44F8-9A48-140D42DB7767
Device Start End Sectors Size Type
/dev/mmcblk0p1 2048 206847 204800 100M EFI System
/dev/mmcblk0p2 206848 239615 32768 16M Microsoft reserved
/dev/mmcblk0p3 239616 58988543 58748928 28G Microsoft basic data
/dev/mmcblk0p4 58988544 60422143 1433600 700M Windows recovery environment
Disk /dev/mmcblk2: 29.5 GiB, 31666995200 bytes, 61849600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x4757e28d
Device Boot Start End Sectors Size Id Type
/dev/mmcblk2p1 32 61849375 61849344 29.5G c W95 FAT32 (LBA)
Disk /dev/sda: 3.62 GiB, 3868430336 bytes, 7555528 sectors
Disk model: DataTraveler G3
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x06adc9df
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 0 4971007 4971008 2.4G 0 Empty
/dev/sda2 3849324 3857259 7936 3.9M ef EFI (FAT-12/16/32)
/dev/sda3 4972544 7555527 2582984 1.2G 83 Linux
ubuntu-mate@ubuntu-mate:~$ Hors ligne
#19 Le 29/12/2020, à 19:17
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Nuliel a écrit :
HS: Par contre je me demande ce qui peut y avoir dans northbridge et southbridge (peut être un changement de voltage), c'est juste par curiosité
Je ne sais pas du tout ce que ça veut dire 
Hors ligne
#20 Le 29/12/2020, à 19:53
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Nuliel a écrit :
HS: Par contre je me demande ce qui peut y avoir dans northbridge et southbridge (peut être un changement de voltage), c'est juste par curiosité
Dernière modification par mvb1 (Le 29/12/2020, à 19:53)
Hors ligne
#21 Le 29/12/2020, à 21:38
- Nuliel
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Déjà le truc le plus étonnant: pourquoi y a t'il deux mmc de 32 Go? As tu inséré une carte sd dans le pc?
Je pense que tu peux essayer de désactiver acpi D3cold et voir si la carte wifi fonctionne, et si
iwlwifi 0000:01:00.0: Refused to change power state, currently in D3apparaît toujours dans le dmesg
HS: merci, j'avoue je comprends pas trop ce que ça fait, mais ce bios est quand même fourni
Dernière modification par Nuliel (Le 29/12/2020, à 21:39)
Hors ligne
#22 Le 29/12/2020, à 22:13
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Pour la sd card oui y en a une externe et je sais qu'elle était fourni avec le pc d'origine
ok je vais tester la désactivation et te tiens au courant
Hors ligne
#23 Le 29/12/2020, à 22:18
- Nuliel
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
Mais quel est l'intérêt de fournir une carte sd externe? Y a t'il quelque chose dessus?
Hors ligne
#24 Le 29/12/2020, à 22:28
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
D'origine je ne sais pas
Mais quand on me l'a filé il n'y avait rien
j'y est basculé les prog qui voulaient bien être déplacés de façon récupérer le plus possible d'espace disque
mais ça n'a pas suffit. La MAJ ne s'est jamais faite
C'est clair qu'ls auraient mieux de mettre une sd plus grande à l'intérieur
Hors ligne
#25 Le 29/12/2020, à 22:41
- mvb1
Re : [RESOLU sauf clavier] Installation linux sur thomson HERO13
YEEEESSSSS suis avec le wifi
[ 1.426386] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.426391] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.426394] usb usb1: Product: xHCI Host Controller
[ 1.426398] usb usb1: Manufacturer: Linux 5.4.0-42-generic xhci-hcd
[ 1.426400] usb usb1: SerialNumber: 0000:00:15.0
[ 1.426673] hub 1-0:1.0: USB hub found
[ 1.426718] hub 1-0:1.0: 9 ports detected
[ 1.432011] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 1.432020] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[ 1.432027] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
[ 1.432113] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.432116] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.432119] usb usb2: Product: xHCI Host Controller
[ 1.432122] usb usb2: Manufacturer: Linux 5.4.0-42-generic xhci-hcd
[ 1.432125] usb usb2: SerialNumber: 0000:00:15.0
[ 1.432345] hub 2-0:1.0: USB hub found
[ 1.432369] hub 2-0:1.0: 7 ports detected
[ 1.437139] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.437142] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.440366] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.440590] mousedev: PS/2 mouse device common for all mice
[ 1.440983] rtc_cmos 00:03: RTC can wake from S4
[ 1.441695] rtc_cmos 00:03: registered as rtc0
[ 1.441730] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.441743] i2c /dev entries driver
[ 1.441847] device-mapper: uevent: version 1.0.3
[ 1.442019] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 1.442063] platform eisa.0: Probing EISA bus 0
[ 1.442067] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.442071] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.442074] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.442077] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.442079] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.442082] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.442085] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.442087] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.442090] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.442093] platform eisa.0: EISA: Detected 0 cards
[ 1.442108] intel_pstate: Intel P-state driver initializing
[ 1.442376] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.442382] EFI Variables Facility v0.08 2004-May-17
[ 1.449443] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.474467] drop_monitor: Initializing network drop monitor service
[ 1.474678] NET: Registered protocol family 10
[ 1.487890] Segment Routing with IPv6
[ 1.487935] NET: Registered protocol family 17
[ 1.487995] Key type dns_resolver registered
[ 1.488286] RAS: Correctable Errors collector initialized.
[ 1.488336] microcode: sig=0x706a1, pf=0x1, revision=0x32
[ 1.488384] microcode: Microcode Update Driver: v2.2.
[ 1.488424] *** VALIDATE rdt ***
[ 1.488431] resctrl: L2 allocation detected
[ 1.488432] resctrl: L2DATA allocation detected
[ 1.488432] resctrl: L2CODE allocation detected
[ 1.488438] IPI shorthand broadcast: enabled
[ 1.488448] sched_clock: Marking stable (1487465169, 946703)->(1492972119, -4560247)
[ 1.488567] registered taskstats version 1
[ 1.488589] Loading compiled-in X.509 certificates
[ 1.491803] Loaded X.509 cert 'Build time autogenerated kernel key: 9e1aeb581c5145b0cc48f50fdf6e09edec23120f'
[ 1.491850] zswap: loaded using pool lzo/zbud
[ 1.491935] Key type ._fscrypt registered
[ 1.491936] Key type .fscrypt registered
[ 1.504349] Key type big_key registered
[ 1.504358] Key type trusted registered
[ 1.510378] Key type encrypted registered
[ 1.510382] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.511821] integrity: Loading X.509 certificate: UEFI:db
[ 1.511875] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.511876] integrity: Loading X.509 certificate: UEFI:db
[ 1.511903] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.513845] ima: Allocated hash algorithm: sha1
[ 1.543650] ima: No architecture policies found
[ 1.543690] evm: Initialising EVM extended attributes:
[ 1.543692] evm: security.selinux
[ 1.543692] evm: security.SMACK64
[ 1.543693] evm: security.SMACK64EXEC
[ 1.543693] evm: security.SMACK64TRANSMUTE
[ 1.543694] evm: security.SMACK64MMAP
[ 1.543694] evm: security.apparmor
[ 1.543695] evm: security.ima
[ 1.543696] evm: security.capability
[ 1.543697] evm: HMAC attrs: 0x1
[ 1.544918] PM: Magic number: 0:61:297
[ 1.545231] rtc_cmos 00:03: setting system clock to 2020-12-29T20:16:32 UTC (1609272992)
[ 1.546943] Freeing unused decrypted memory: 2040K
[ 1.547720] Freeing unused kernel image memory: 2712K
[ 1.547756] Write protecting the kernel read-only data: 22528k
[ 1.548405] Freeing unused kernel image memory: 2008K
[ 1.548783] Freeing unused kernel image memory: 1192K
[ 1.562660] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.562703] x86/mm: Checking user space page tables
[ 1.576219] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.576224] Run /init as init process
[ 1.772606] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.791944] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.829168] ahci 0000:00:12.0: version 3.0
[ 1.829534] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.829538] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst
[ 1.835368] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 1.840606] scsi host0: ahci
[ 1.848603] scsi host1: ahci
[ 1.848673] ata1: SATA max UDMA/133 abar m2048@0xa1237000 port 0xa1237100 irq 126
[ 1.848677] ata2: SATA max UDMA/133 abar m2048@0xa1237000 port 0xa1237180 irq 126
[ 1.855012] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[ 1.855053] i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
[ 1.859494] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 1.864899] sdhci: Secure Digital Host Controller Interface driver
[ 1.864900] sdhci: Copyright(c) Pierre Ossman
[ 1.868317] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:31cc] (rev 3)
[ 1.868728] mmc0: CQHCI version 5.10
[ 1.875311] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 1.876683] mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
[ 1.876712] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:31d0] (rev 3)
[ 1.876723] sdhci-pci 0000:00:1e.0: enabling device (0000 -> 0002)
[ 1.885296] mmc1: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit
[ 1.890759] idma64 idma64.3: Found Intel integrated DMA 64-bit
[ 1.923560] idma64 idma64.4: Found Intel integrated DMA 64-bit
[ 1.930499] i2c_hid i2c-GDIX8500:00: i2c-GDIX8500:00 supply vdd not found, using dummy regulator
[ 1.930517] i2c_hid i2c-GDIX8500:00: i2c-GDIX8500:00 supply vddl not found, using dummy regulator
[ 1.938457] checking generic (90000000 e10000) vs hw (90000000 10000000)
[ 1.938459] fb0: switching to inteldrmfb from EFI VGA
[ 1.938566] Console: switching to colour dummy device 80x25
[ 1.938605] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.938710] [drm] couldn't get memory information
[ 1.938712] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.938713] [drm] Driver supports precise vblank timestamp query.
[ 1.938833] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.939482] [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
[ 1.945236] cryptd: max_cpu_qlen set to 1000
[ 1.953482] SSE version of gcm_enc/dec engaged.
[ 1.964831] idma64 idma64.5: Found Intel integrated DMA 64-bit
[ 1.972029] idma64 idma64.6: Found Intel integrated DMA 64-bit
[ 1.982320] idma64 idma64.7: Found Intel integrated DMA 64-bit
[ 1.986734] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 1.988951] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.989378] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.994512] idma64 idma64.8: Found Intel integrated DMA 64-bit
[ 1.996280] idma64 idma64.9: Found Intel integrated DMA 64-bit
[ 1.997021] idma64 idma64.11: Found Intel integrated DMA 64-bit
[ 1.997347] idma64 idma64.12: Found Intel integrated DMA 64-bit
[ 1.997674] idma64 idma64.13: Found Intel integrated DMA 64-bit
[ 2.001691] mmc0: Command Queue Engine enabled
[ 2.001697] mmc0: new HS200 MMC card at address 0001
[ 2.014582] usb 1-1: New USB device found, idVendor=0951, idProduct=1643, bcdDevice= 1.00
[ 2.014585] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.014587] usb 1-1: Product: DataTraveler G3
[ 2.014588] usb 1-1: Manufacturer: Kingston
[ 2.014589] usb 1-1: SerialNumber: 001CC0EC31D0F0912607135E
[ 2.060866] input: GDIX8500:00 27C6:0101 Touchscreen as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX8500:00/0018:27C6:0101.0001/input/input4
[ 2.061123] input: GDIX8500:00 27C6:0101 as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX8500:00/0018:27C6:0101.0001/input/input5
[ 2.061232] input: GDIX8500:00 27C6:0101 Keyboard as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX8500:00/0018:27C6:0101.0001/input/input6
[ 2.061463] hid-generic 0018:27C6:0101.0001: input,hidraw0: I2C HID v1.00 Keyboard [GDIX8500:00 27C6:0101] on i2c-GDIX8500:00
[ 2.079536] mmcblk0: mmc0:0001 Biwin 28.8 GiB
[ 2.079634] mmcblk0boot0: mmc0:0001 Biwin partition 1 4.00 MiB
[ 2.079758] mmcblk0boot1: mmc0:0001 Biwin partition 2 4.00 MiB
[ 2.079821] mmcblk0rpmb: mmc0:0001 Biwin partition 3 4.00 MiB, chardev (239:0)
[ 2.122602] fbcon: i915drmfb (fb0) is primary device
[ 2.130221] Console: switching to colour frame buffer device 160x45
[ 2.144887] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 2.158219] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 2.163693] mmcblk0: p1 p2 p3 p4
[ 2.165440] ata2: SATA link down (SStatus 4 SControl 300)
[ 2.165538] ata1: SATA link down (SStatus 4 SControl 300)
[ 2.293102] usb 1-4: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[ 2.293105] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.293107] usb 1-4: Product: USB2.0-CRW
[ 2.293108] usb 1-4: Manufacturer: Generic
[ 2.293109] usb 1-4: SerialNumber: 20100201396000000
[ 2.420873] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[ 2.570101] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 2.570104] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.696880] usb 1-8: new low-speed USB device number 5 using xhci_hcd
[ 2.854728] usb 1-8: New USB device found, idVendor=258a, idProduct=000c, bcdDevice= 1.00
[ 2.854734] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.854737] usb 1-8: Product: USB KEYBOARD
[ 2.854740] usb 1-8: Manufacturer: HAILUCK CO.,LTD
[ 2.863804] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 2.866658] scsi host2: usb-storage 1-1:1.0
[ 2.867142] usbcore: registered new interface driver usb-storage
[ 2.867919] usbcore: registered new interface driver rtsx_usb
[ 2.869257] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.0/0003:258A:000C.0002/input/input7
[ 2.870229] usbcore: registered new interface driver uas
[ 2.928894] hid-generic 0003:258A:000C.0002: input,hidraw1: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] on usb-0000:00:15.0-8/input0
[ 2.940364] input: HAILUCK CO.,LTD USB KEYBOARD Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.1/0003:258A:000C.0003/input/input8
[ 2.940688] input: HAILUCK CO.,LTD USB KEYBOARD System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.1/0003:258A:000C.0003/input/input9
[ 3.001375] input: HAILUCK CO.,LTD USB KEYBOARD Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.1/0003:258A:000C.0003/input/input10
[ 3.001468] input: HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.1/0003:258A:000C.0003/input/input11
[ 3.001722] hid-generic 0003:258A:000C.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-0000:00:15.0-8/input1
[ 3.001775] usbcore: registered new interface driver usbhid
[ 3.001776] usbhid: USB HID core driver
[ 3.521068] mmc2: new ultra high speed SDR50 SDHC card at address 59b4
[ 3.521440] mmcblk2: mmc2:59b4 SMI 29.5 GiB
[ 3.538296] mmcblk2: p1
[ 3.885312] scsi 2:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
[ 3.885831] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.886330] sd 2:0:0:0: [sda] 7555528 512-byte logical blocks: (3.87 GB/3.60 GiB)
[ 3.887970] sd 2:0:0:0: [sda] Write Protect is off
[ 3.887972] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 3.888123] sd 2:0:0:0: [sda] No Caching mode page found
[ 3.888127] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 3.894797] sda: sda1 sda2 sda3
[ 3.895815] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 5.844387] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5.850351] ISO 9660 Extensions: RRIP_1991A
[ 5.873842] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5.875747] ISO 9660 Extensions: RRIP_1991A
[ 6.833176] EXT4-fs (sda3): recovery complete
[ 6.837113] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 387.878301] systemd[1]: Inserted module 'autofs4'
[ 387.977573] systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 387.996927] systemd[1]: Detected architecture x86-64.
[ 388.013704] systemd[1]: Set hostname to <ubuntu-mate>.
[ 388.013947] systemd[1]: Initializing machine ID from random generator.
[ 388.246791] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 388.320930] systemd[1]: Created slice system-modprobe.slice.
[ 388.321311] systemd[1]: Created slice User and Session Slice.
[ 388.321429] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 388.321841] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 388.321889] systemd[1]: Reached target User and Group Name Lookups.
[ 388.321911] systemd[1]: Reached target Remote File Systems.
[ 388.321936] systemd[1]: Reached target Slices.
[ 388.321960] systemd[1]: Reached target Swap.
[ 388.322095] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 388.322609] systemd[1]: Listening on LVM2 poll daemon socket.
[ 388.322875] systemd[1]: Listening on Syslog Socket.
[ 388.322963] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 388.323489] systemd[1]: Listening on Journal Audit Socket.
[ 388.323649] systemd[1]: Listening on Journal Socket (/dev/log).
[ 388.323851] systemd[1]: Listening on Journal Socket.
[ 388.324041] systemd[1]: Listening on udev Control Socket.
[ 388.324188] systemd[1]: Listening on udev Kernel Socket.
[ 388.325738] systemd[1]: Mounting Huge Pages File System...
[ 388.327416] systemd[1]: Mounting POSIX Message Queue File System...
[ 388.329048] systemd[1]: Mounting Kernel Debug File System...
[ 388.330611] systemd[1]: Mounting Kernel Trace File System...
[ 388.332938] systemd[1]: Starting Journal Service...
[ 388.334513] systemd[1]: Starting Availability of block devices...
[ 388.337169] systemd[1]: Starting Set the console keyboard layout...
[ 388.341352] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 388.342864] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 388.342946] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 388.346537] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 388.350788] systemd[1]: Starting Load Kernel Modules...
[ 388.352274] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 388.353813] systemd[1]: Starting udev Coldplug all Devices...
[ 388.355253] systemd[1]: Starting Uncomplicated firewall...
[ 388.394560] systemd[1]: Mounted Huge Pages File System.
[ 388.415491] systemd[1]: Mounted POSIX Message Queue File System.
[ 388.429612] systemd[1]: Mounted Kernel Debug File System.
[ 388.438708] systemd[1]: Mounted Kernel Trace File System.
[ 388.440039] systemd[1]: Finished Availability of block devices.
[ 388.443050] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 388.448751] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 388.450231] systemd[1]: Finished Uncomplicated firewall.
[ 388.455569] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 388.455638] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 388.460899] systemd[1]: Starting Create System Users...
[ 388.463717] lp: driver loaded but no devices found
[ 388.507171] ppdev: user-space parallel port driver
[ 388.507641] systemd[1]: Finished Create System Users.
[ 388.515047] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 388.525623] systemd[1]: Finished Load Kernel Modules.
[ 388.529596] systemd[1]: Mounting FUSE Control File System...
[ 388.531162] systemd[1]: Mounting Kernel Configuration File System...
[ 388.532571] systemd[1]: Starting Apply Kernel Variables...
[ 388.556151] systemd[1]: Mounted FUSE Control File System.
[ 388.576855] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 388.578635] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 388.588285] systemd[1]: Mounted Kernel Configuration File System.
[ 388.597660] systemd[1]: Finished Apply Kernel Variables.
[ 388.600021] systemd[1]: Starting udev Kernel Device Manager...
[ 388.777916] systemd[1]: Finished Set the console keyboard layout.
[ 388.778207] systemd[1]: Reached target Local File Systems (Pre).
[ 388.778318] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 388.781049] systemd[1]: Mounting /tmp...
[ 388.787901] systemd[1]: Mounted /tmp.
[ 388.810540] systemd[1]: Started Journal Service.
[ 388.829428] systemd-journald[1301]: Received client request to flush runtime journal.
[ 389.626649] input: Intel HID events as /devices/platform/INT33D5:00/input/input12
[ 389.692403] intel-hid INT33D5:00: platform supports 5 button array
[ 389.692467] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input13
[ 389.940785] proc_thermal 0000:00:00.1: Creating sysfs group for PROC_THERMAL_PCI
[ 390.045813] Bluetooth: Core ver 2.22
[ 390.045836] NET: Registered protocol family 31
[ 390.045837] Bluetooth: HCI device and connection manager initialized
[ 390.045842] Bluetooth: HCI socket layer initialized
[ 390.045845] Bluetooth: L2CAP socket layer initialized
[ 390.045849] Bluetooth: SCO socket layer initialized
[ 390.058566] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 390.079638] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 390.089334] dw-apb-uart.8: ttyS4 at MMIO 0xa1226000 (irq = 4, base_baud = 115200) is a 16550A
[ 390.128979] dw-apb-uart.9: ttyS5 at MMIO 0xa1224000 (irq = 5, base_baud = 115200) is a 16550A
[ 390.129044] Intel(R) Wireless WiFi driver for Linux
[ 390.129046] Copyright(c) 2003- 2015 Intel Corporation
[ 390.129347] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
[ 390.147154] iwlwifi 0000:01:00.0: Found debug destination: EXTERNAL_DRAM
[ 390.147158] iwlwifi 0000:01:00.0: Found debug configuration: 0
[ 390.147602] iwlwifi 0000:01:00.0: loaded firmware version 29.1654887522.0 op_mode iwlmvm
[ 390.152720] dw-apb-uart.10: ttyS6 at MMIO 0xa1222000 (irq = 7, base_baud = 115200) is a 16550A
[ 390.175746] input: GDIX8500:00 27C6:0101 as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX8500:00/0018:27C6:0101.0001/input/input14
[ 390.183219] input: GDIX8500:00 27C6:0101 Stylus as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX8500:00/0018:27C6:0101.0001/input/input15
[ 390.183304] input: GDIX8500:00 27C6:0101 Keyboard as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX8500:00/0018:27C6:0101.0001/input/input16
[ 390.183407] hid-multitouch 0018:27C6:0101.0001: input,hidraw0: I2C HID v1.00 Keyboard [GDIX8500:00 27C6:0101] on i2c-GDIX8500:00
[ 390.208799] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[ 390.222691] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[ 390.224053] iwlwifi 0000:01:00.0: Allocated 0x00400000 bytes for firmware monitor.
[ 390.234508] iwlwifi 0000:01:00.0: base HW address: 68:ec:c5:d8:f8:83
[ 390.241444] usbcore: registered new interface driver btusb
[ 390.256925] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 390.258699] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 390.303254] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 390.304183] thermal thermal_zone4: failed to read out thermal zone (-61)
[ 390.393540] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 390.393542] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 390.393543] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 390.393544] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 390.393544] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 390.565219] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[ 390.581947] Bluetooth: hci0: Intel firmware patch completed and activated
[ 390.683004] intel_telemetry_core Init
[ 390.726538] Invalid pltconfig, ensure IPC1 device is enabled in BIOS
[ 390.777259] Invalid pltconfig, ensure IPC1 device is enabled in BIOS
[ 390.836322] intel_rapl_common: Found RAPL domain package
[ 390.836325] intel_rapl_common: Found RAPL domain core
[ 390.836327] intel_rapl_common: Found RAPL domain uncore
[ 390.836329] intel_rapl_common: Found RAPL domain dram
[ 390.920019] mei_hdcp 0000:00:0f.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 391.060239] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[ 391.094251] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 391.140101] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 391.140105] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 391.140107] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 391.140108] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 391.140109] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 391.140111] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 391.140112] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 391.182883] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input17
[ 391.182966] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input18
[ 391.183036] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input19
[ 391.183106] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input20
[ 391.183175] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input21
[ 391.183244] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input22
[ 391.183314] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input23
[ 391.779557] zlua: loading out-of-tree module taints kernel.
[ 391.779562] zlua: module license 'MIT' taints kernel.
[ 391.779563] Disabling lock debugging due to kernel taint
[ 393.491705] ZFS: Loaded module v0.8.3-1ubuntu12.1, ZFS pool version 5000, ZFS filesystem version 5
[ 394.984327] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 394.984330] Bluetooth: BNEP filters: protocol multicast
[ 394.984336] Bluetooth: BNEP socket layer initialized
[ 395.059704] NET: Registered protocol family 38
[ 396.152439] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[ 396.242136] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[ 396.244082] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[ 396.278161] iwlwifi 0000:01:00.0: BIOS contains WGDS but no WRDS
[ 397.443098] audit: type=1400 audit(1609273388.391:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1811 comm="apparmor_parser"
[ 397.443331] audit: type=1400 audit(1609273388.391:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1811 comm="apparmor_parser"
[ 399.827526] Bluetooth: RFCOMM TTY layer initialized
[ 399.827537] Bluetooth: RFCOMM socket layer initialized
[ 399.827544] Bluetooth: RFCOMM ver 1.11
[ 404.271423] audit: type=1400 audit(1609273395.219:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine" pid=2410 comm="apparmor_parser"
[ 404.271707] audit: type=1400 audit(1609273395.219:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2410 comm="apparmor_parser"
[ 414.637017] FAT-fs (mmcblk2p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 463.279713] audit: type=1400 audit(1609273454.227:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine" pid=2926 comm="apparmor_parser"
[ 463.297046] audit: type=1400 audit(1609273454.247:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2926 comm="apparmor_parser"
[ 465.951089] audit: type=1400 audit(1609273456.899:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.software-boutique.software-boutique" pid=3087 comm="apparmor_parser"
[ 465.961996] audit: type=1400 audit(1609273456.911:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.software-boutique" pid=3086 comm="apparmor_parser"
[ 467.018270] audit: type=1400 audit(1609273457.967:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.ubuntu-mate-welcome.hook.install" pid=3184 comm="apparmor_parser"
[ 467.024259] audit: type=1400 audit(1609273457.971:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.ubuntu-mate-welcome.hook.post-refresh" pid=3185 comm="apparmor_parser"
[ 467.028048] audit: type=1400 audit(1609273457.975:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.ubuntu-mate-welcome" pid=3183 comm="apparmor_parser"
[ 467.029966] audit: type=1400 audit(1609273457.979:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.ubuntu-mate-welcome.hook.remove" pid=3186 comm="apparmor_parser"
[ 467.033092] audit: type=1400 audit(1609273457.983:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.ubuntu-mate-welcome.software-boutique" pid=3187 comm="apparmor_parser"
[ 467.034950] audit: type=1400 audit(1609273457.983:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.ubuntu-mate-welcome.ubuntu-mate-welcome" pid=3188 comm="apparmor_parser"
[ 888.775523] wlp1s0: authenticate with ec:3c:bb:42:c9:17
[ 888.785017] wlp1s0: send auth to ec:3c:bb:42:c9:17 (try 1/3)
[ 888.787531] wlp1s0: authenticated
[ 888.792650] wlp1s0: associate with ec:3c:bb:42:c9:17 (try 1/3)
[ 888.796559] wlp1s0: RX AssocResp from ec:3c:bb:42:c9:17 (capab=0x1411 status=0 aid=3)
[ 888.801090] wlp1s0: associated
[ 896.843388] wlp1s0: deauthenticated from ec:3c:bb:42:c9:17 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[ 963.830868] wlp1s0: authenticate with ec:3c:bb:42:c9:17
[ 963.838012] wlp1s0: send auth to ec:3c:bb:42:c9:17 (try 1/3)
[ 963.843321] wlp1s0: authenticated
[ 963.844665] wlp1s0: associate with ec:3c:bb:42:c9:17 (try 1/3)
[ 963.849009] wlp1s0: RX AssocResp from ec:3c:bb:42:c9:17 (capab=0x1411 status=0 aid=3)
[ 963.852492] wlp1s0: associated
[ 963.927208] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
ubuntu-mate@ubuntu-mate:~$ Hors ligne