Pages : 1
#1 Le 13/05/2017, à 18:10
- kid24
Démarrage ubuntu 6 fois plus long que win10
Bonjours,
Mon ubuntu gnome 16.04lts démarre 6 fois plus lentement que mon autre pc sur win10 et sa malgré un ssd pour le système. Pc amd FX8320, 8go de mémoire vive, ssd 128go adata carte mère asus pro gaming aura.
Merci.
Hors ligne
#2 Le 13/05/2017, à 18:24
- malbo
Re : Démarrage ubuntu 6 fois plus long que win10
Bonjour,
Depuis une session de ton Ubuntu 16.04 installé, je te prie de faire un rapport Bisnext. On pourra y vérifier pas mal de chose qui pourraient influer sur le démarrage.
Hors ligne
#3 Le 14/05/2017, à 02:21
- kid24
Re : Démarrage ubuntu 6 fois plus long que win10
Bonjours Malbo,
Voici le rapport.
May 13 2017, bisnext report id ed31b also available at https://paste.debian.net/932358/
Hors ligne
#4 Le 14/05/2017, à 06:41
- malbo
Re : Démarrage ubuntu 6 fois plus long que win10
Ton rapport Bisnext est là :
Posting 932358 from bn-ed31b posted at 2017-05-14 01:11:49 expires: 2017-06-13 01:11:49
May 13, 2017, bisnext report id ed31b
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.4.0-77-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: N/A dm: gdm3 Distro: Ubuntu 16.04.2 LTS
Machine: Device: desktop Mobo: ASUSTeK model: 970 PRO GAMING/AURA v: Rev 1.xx
UEFI: American Megatrends v: 0901 date: 11/07/2016
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Octa core AMD FX-8320 Eight-Core (-MCP-) cache: 16384 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 56191
clock speeds: min/max: 1400/3500 MHz 1: 2300 MHz 2: 1400 MHz
3: 1400 MHz 4: 1700 MHz 5: 1400 MHz 6: 1400 MHz 7: 3500 MHz
8: 1400 MHz
Memory: Array-1 capacity: 32 GB devices: 4 EC: None
Device-1: DIMM0 size: No Module Installed type: N/A
Device-2: DIMM1 size: 4 GB speed: 800 MHz type: DDR3
manufacturer: Kingston part: KHX1600C10D3/4G
Device-3: DIMM2 size: No Module Installed type: N/A
Device-4: DIMM3 size: 4 GB speed: 800 MHz type: DDR3
manufacturer: Kingston part: KHX1600C10D3/4G
Graphics: Card: NVIDIA Device 1c81 bus-ID: 01:00.0 chip-ID: 10de:1c81
Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: modesetting,fbdev,vesa,nouveau)
tty size: 1280x1024@60.02hz, 1280x1024@60.02hz
GLX Renderer: GeForce GTX 1050/PCIe/SSE2
GLX Version: 4.5.0 NVIDIA 381.22 Direct Rendering: Yes
Audio: Card-1 NVIDIA Device 0fb9
driver: snd_hda_intel bus-ID: 01:00.1 chip-ID: 10de:0fb9
Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA)
driver: snd_hda_intel bus-ID: 00:14.2 chip-ID: 1002:4383
Card-3 Logitech Webcam C270
driver: USB Audio usb-ID: 001-004 chip-ID: 046d:0825
Sound: Advanced Linux Sound Architecture v: k4.4.0-77-generic
Network: Card: Intel I211 Gigabit Network Connection
driver: igb v: 5.3.0-k port: d000
bus-ID: 04:00.0 chip-ID: 8086:1539
IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1208.2GB (2.2% used)
ID-1: /dev/sda model: ADATA_SU800 size: 128.0GB
ID-2: /dev/sdb model: WDC_WD10EZEX size: 1000.2GB
ID-3: /dev/sdc model: Maxtor_6L080M0 size: 80.0GB
Optical: /dev/sr0 model: TSST DVD+-RW TS-H653B
rev: D300 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 48x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running
Partition: ID-1: / size: 109G used: 18G (17%) fs: ext4 dev: /dev/sda2
label: N/A uuid: 9bf5c21f-6e74-4967-9850-fd0ea295e1bb
ID-2: /boot/efi size: 511M used: 3.5M (1%) fs: vfat dev: /dev/sda1
label: N/A uuid: 6726-9FA0
ID-3: swap-1 size: 8.48GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
label: N/A uuid: e4c9a43b-24f7-4d6b-bd63-1715e8c5966b
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sdc1 size: 80.00G
fs: ext4 label: Mes fichiers 1 uuid: 6a8880d3-d111-407c-8608-bcc9cb59afe8
Sensors: System Temperatures: cpu: 28.0C mobo: 20.9C gpu: 1.0:28C
Fan Speeds (in rpm): cpu: 0 fan-1: 1264 fan-2: 0 fan-3: 0 fan-4: 1400 fan-5: 1409
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://ca.archive.ubuntu.com/ubuntu/ xenial main restricted
deb http://ca.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
deb http://ca.archive.ubuntu.com/ubuntu/ xenial universe
deb http://ca.archive.ubuntu.com/ubuntu/ xenial-updates universe
deb http://ca.archive.ubuntu.com/ubuntu/ xenial multiverse
deb http://ca.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
deb http://ca.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
deb http://archive.canonical.com/ubuntu xenial partner
deb http://security.ubuntu.com/ubuntu xenial-security main restricted
deb http://security.ubuntu.com/ubuntu xenial-security universe
deb http://security.ubuntu.com/ubuntu xenial-security multiverse
Active apt sources in file: /etc/apt/sources.list.d/google-chrome.list
deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
Active apt sources in file: /etc/apt/sources.list.d/graphics-drivers-ubuntu-ppa-xenial.list
deb http://ppa.launchpad.net/graphics-drivers/ppa/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/ne0sight-ubuntu-chrome-gnome-shell-xenial.list
deb http://ppa.launchpad.net/ne0sight/chrome-gnome-shell/ubuntu xenial main
Active apt sources in file: /etc/apt/sources.list.d/yannubuntu-ubuntu-boot-repair-xenial.list
deb http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial main
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 7.1% command: chrome pid: 13906 mem: 171.37MB (2.1%)
2: cpu: 6.1% command: chrome pid: 14261 mem: 100.43MB (1.2%)
3: cpu: 2.9% command: chrome pid: 13977 mem: 158.78MB (2.0%)
4: cpu: 2.0% command: gnome-shell pid: 1807 mem: 314.64MB (3.9%)
5: cpu: 0.7% command: gnome-terminal-server pid: 14325 mem: 36.43MB (0.4%)
6: cpu: 0.6% command: bash pid: 15476 mem: 4.45MB (0.0%)
7: cpu: 0.2% command: Xorg pid: 1516 mem: 49.70MB (0.6%)
8: cpu: 0.1% command: thunderbird pid: 2116 mem: 227.51MB (2.8%)
9: cpu: 0.1% daemon: ~irq/52-nvidia~ pid: 1311 mem: 0.00MB (0.0%)
10: cpu: 0.1% command: domoticz pid: 1285 mem: 21.38MB (0.2%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 314.64MB (3.9%) command: gnome-shell pid: 1807 cpu: 2.0%
2: mem: 227.51MB (2.8%) command: thunderbird pid: 2116 cpu: 0.1%
3: mem: 171.37MB (2.1%) command: chrome pid: 13906 cpu: 7.1%
4: mem: 158.78MB (2.0%) command: chrome pid: 13977 cpu: 2.9%
5: mem: 152.88MB (1.9%) command: gnome-shell pid: 1400 cpu: 0.0%
6: mem: 122.22MB (1.5%) command: gnome-software pid: 1919 cpu: 0.0%
7: mem: 100.43MB (1.2%) command: chrome pid: 14261 cpu: 6.1%
8: mem: 87.84MB (1.1%) command: goa-daemon pid: 1842 cpu: 0.0%
9: mem: 84.55MB (1.0%) command: chrome pid: 14027 cpu: 0.0%
10: mem: 70.24MB (0.8%) command: evolution-calendar-factory-subprocess pid: 1994 cpu: 0.0%
Info: Processes: 252 Uptime: 11:58 Memory: 1803.2/7881.3MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,0003,0001
Boot0000* ubuntu HD(1,GPT,8673cb16-48e1-481e-b00b-0e6af11f79b2,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)
Boot0001* Hard Drive BBS(HD,,0x0)AMGOAMNO........o.A.D.A.T.A. .S.U.8.0.0....................A...........................>..Gd-.;.A..MQ..L.G.2.7.3.0.2.4.0.7.8.1.1. . . . . . . . ......AMBOAMNO........o.W.D.C. .W.D.1.0.E.Z.E.X.-.6.0.W.N.4.A.0....................A...........................>..Gd-.;.A..MQ..L. . . . .W. .-.D.C.W.6.C.7.Y.Y.L.R.S.U.F......AMBOAMNO........o.M.a.x.t.o.r. .6.L.0.8.0.M.0....................A...........................>..Gd-.;.A..MQ..L.2.L.B.0.K.A.H.A. . . . .2.L.B.0.K.A.H.A......AMBO
Boot0003* Lecteur CD/DVD BBS(CDROM,,0x0)AMGOAMNO........o.T.S.S.T.c.o.r.p. .D.V.D.+./.-.R.W. .T.S.-.H.6.5.3.B....................A...........................>..Gd-.;.A..MQ..L. . . . . . . . . . . . . . . . . . . . ......AMBO
vfat partitions details:
/dev/sda1: UUID="6726-9FA0" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="8673cb16-48e1-481e-b00b-0e6af11f79b2"
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
_____________________________ md5sum of EFI files _____________________________
EFI files in /dev/sda1:
d73bbea8b6c047d2a706472f87d3ccdb /EFI/ubuntu/fwupx64.efi
34a5c2687e10f4cad35391d68ff32a6c /EFI/ubuntu/grubx64.efi
3aef9c72ad50faa8db576c01f85a0915 /EFI/ubuntu/shimx64.efi
bf39cf9416a9403d40a9b69541486e74 /EFI/ubuntu/mmx64.efi
61c7898dd613614b15cee0081226572c /EFI/ubuntu/fbx64.efi
========================= Boot Information Details ============================
=> No boot loader is installed in the MBR of /dev/sda.
=> libparted MBR boot code is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi /EFI/ubuntu/mmx64.efi
/EFI/ubuntu/fbx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb: ___________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disque /dev/sda : 119,2 GiB, 128035676160 octets, 250069680 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 250,069,679 250,069,679 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 233,502,719 232,452,096 Data partition (Linux)
/dev/sda3 233,502,720 250,068,991 16,566,272 Swap partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdc _____________________________________________________________________
Disque /dev/sdc : 74,5 GiB, 80000000000 octets, 156250000 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 2,048 156,249,999 156,247,952 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 6726-9FA0 vfat
/dev/sda2 9bf5c21f-6e74-4967-9850-fd0ea295e1bb ext4
/dev/sda3 e4c9a43b-24f7-4d6b-bd63-1715e8c5966b swap
/dev/sdb f2030b92-98a1-4b76-a2f9-ec405b5317ac ext4 Mes fichiers 0
/dev/sdc1 6a8880d3-d111-407c-8608-bcc9cb59afe8 ext4 Mes fichiers 1
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 mai 13 09:10 ata-ADATA_SU800_2G3720048711 -> ../../sda
lrwxrwxrwx 1 root root 10 mai 13 09:10 ata-ADATA_SU800_2G3720048711-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai 13 09:10 ata-ADATA_SU800_2G3720048711-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai 13 09:10 ata-ADATA_SU800_2G3720048711-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 mai 13 09:10 ata-Maxtor_6L080M0_L20BAKAH_L20BAKAH -> ../../sdc
lrwxrwxrwx 1 root root 10 mai 13 09:10 ata-Maxtor_6L080M0_L20BAKAH_L20BAKAH-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 mai 13 09:10 ata-TSSTcorp_DVD+_-RW_TS-H653B -> ../../sr0
lrwxrwxrwx 1 root root 9 mai 13 09:10 ata-WDC_WD10EZEX-60WN4A0_WD-WCC6Y7LYSRFU -> ../../sdb
lrwxrwxrwx 1 root root 9 mai 13 09:10 wwn-0x50014ee20ddea7a9 -> ../../sdb
lrwxrwxrwx 1 root root 9 mai 13 09:10 wwn-0x5707c1810032afc8 -> ../../sda
lrwxrwxrwx 1 root root 10 mai 13 09:10 wwn-0x5707c1810032afc8-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai 13 09:10 wwn-0x5707c1810032afc8-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai 13 09:10 wwn-0x5707c1810032afc8-part3 -> ../../sda3
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda2 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
__________________________=== Boot Files Content ===___________________________
___________________________ sda2/boot/grub/grub.cfg: ___________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-9bf5c21f-6e74-4967-9850-fd0ea295e1bb' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 9bf5c21f-6e74-4967-9850-fd0ea295e1bb
else
search --no-floppy --fs-uuid --set=root 9bf5c21f-6e74-4967-9850-fd0ea295e1bb
fi
linux /boot/vmlinuz-4.4.0-77-generic.efi.signed root=UUID=9bf5c21f-6e74-4967-9850-fd0ea295e1bb ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-77-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda2/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=9bf5c21f-6e74-4967-9850-fd0ea295e1bb / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=6726-9FA0 /boot/efi vfat umask=0077 0 1
# swap was on /dev/sda3 during installation
UUID=e4c9a43b-24f7-4d6b-bd63-1715e8c5966b none swap sw 0 0
____________________________ sda2/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.4.0-77-generic.efi.signed root=UUID=9bf5c21f-6e74-4967-9850-fd0ea295e1bb ro quiet splash vt.handoff=7
______________________________ Boot-up Statistics ______________________________
Startup finished in 122us (firmware) + 51us (loader) + 3.667s (kernel) + 17.966s (userspace) = 21.634s
blame, first 10:
NetworkManager-wait-online.service 7.855s
plymouth-quit-wait.service 7.581s
dev-sda2.device 1.064s
systemd-fsck@dev-disk-by\x2duuid-6726\x2d9FA0.service 316ms
dev-sda3.swap 315ms
networking.service 272ms
accounts-daemon.service 266ms
console-setup.service 263ms
speech-dispatcher.service 242ms
apport.service 240ms
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @17.956s
2 multi-user.target @17.956s
3 getty.target @17.956s
4 getty@tty1.service @17.956s
5 rc-local.service @10.348s +1ms
6 network-online.target @10.336s
7 NetworkManager-wait-online.service @2.481s +7.855s
8 NetworkManager.service @2.377s +79ms
9 dbus.service @2.256s
10 basic.target @2.238s
11 sockets.target @2.238s
12 snapd.socket @2.203s +25ms
13 sysinit.target @2.198s
14 apparmor.service @1.885s +92ms
15 local-fs.target @1.884s
16 run-user-121.mount @10.500s
17 local-fs-pre.target @451ms
18 systemd-remount-fs.service @444ms +3ms
19 system.slice @213ms
20 -.slice @201ms
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 7.7G 1.5G 4.5G 17M 1.6G 5.8G
Swap: 7.9G 0B 7.9G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/sda1 /boot/efi vfat 511M 3.5M 508M 1% -
/dev/sda2 / ext4 109G 18G 87G 17% 7%
_________________________________ USB devices __________________________________
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 046d:0825 Logitech, Inc. Webcam C270
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 004 Device 002: ID 04d9:0024 Holtek Semiconductor, Inc.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 11.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 10.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/: Bus 09.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/4p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/2p, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/5p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/5p, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/4p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/5p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/5p, 480M
|__ Port 3: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 3: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 3: Dev 4, If 2, Class=Audio, Driver=snd-usb-audio, 480M
|__ Port 3: Dev 4, If 3, Class=Audio, Driver=snd-usb-audio, 480M
___________________________________ Modules Loaded ____________________________
Module Size Used by
8250_fintek 16384 0
ablk_helper 16384 1 aesni_intel
aesni_intel 167936 0
aes_x86_64 20480 1 aesni_intel
ahci 36864 3
asus_wmi 28672 1 eeepc_wmi
autofs4 40960 2
btrfs 987136 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 20480 3 ghash_clmulni_intel,aesni_intel,ablk_helper
dca 16384 1 igb
drm 364544 5 drm_kms_helper,nvidia_drm
drm_kms_helper 155648 1 nvidia_drm
edac_core 53248 0
edac_mce_amd 24576 0
eeepc_wmi 16384 0
fam15h_power 16384 0
fb_sys_fops 16384 1 drm_kms_helper
fjes 28672 0
gf128mul 16384 1 lrw
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
hfs 57344 0
hfsplus 106496 0
hid 118784 2 hid_generic,usbhid
hid_generic 16384 0
hwmon_vid 16384 1 it87
i2c_algo_bit 16384 1 igb
i2c_piix4 24576 0
igb 196608 0
input_leds 16384 0
irqbypass 16384 1 kvm
it87 45056 0
jfs 180224 0
k10temp 16384 0
kvm 544768 1 kvm_amd
kvm_amd 65536 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
lrw 16384 1 aesni_intel
mac_hid 16384 0
media 24576 2 uvcvideo,videodev
minix 36864 0
msdos 20480 0
mxm_wmi 16384 0
ntfs 98304 0
nvidia 11550720 169 nvidia_modeset,nvidia_uvm
nvidia_drm 53248 2
nvidia_modeset 811008 8 nvidia_drm
nvidia_uvm 643072 0
parport 49152 3 lp,ppdev,parport_pc
parport_pc 32768 0
ppdev 20480 0
pps_core 20480 1 ptp
psmouse 131072 0
ptp 20480 1 igb
qnx4 16384 0
raid6_pq 102400 1 btrfs
serio_raw 16384 0
shpchp 36864 0
snd 81920 37 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
snd_hda_codec 135168 4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_codec_generic 77824 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 53248 1
snd_hda_codec_realtek 86016 1
snd_hda_core 73728 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hda_intel 40960 10
snd_hwdep 16384 2 snd_usb_audio,snd_hda_codec
snd_pcm 106496 5 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_rawmidi 32768 2 snd_usbmidi_lib,snd_seq_midi
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_timer 32768 2 snd_pcm,snd_seq
snd_usb_audio 176128 2
snd_usbmidi_lib 36864 1 snd_usb_audio
soundcore 16384 1 snd
sparse_keymap 16384 1 asus_wmi
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
tpm_infineon 20480 0
ufs 73728 0
usbhid 49152 0
uvcvideo 90112 0
v4l2_common 16384 1 videobuf2_v4l2
video 40960 1 asus_wmi
videobuf2_core 36864 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 28672 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 176128 4 uvcvideo,v4l2_common,videobuf2_core,videobuf2_v4l2
wmi 20480 2 mxm_wmi,asus_wmi
xfs 970752 0
xor 24576 1 btrfs
______________________________ Additional Drivers _____________________________
== /sys/devices/pci0000:00/0000:00:02.0/0000:01:00.0 ==
vendor : NVIDIA Corporation
modalias : pci:v000010DEd00001C81sv00003842sd00006152bc03sc00i00
driver : xserver-xorg-video-nouveau - distro free builtin
driver : nvidia-378 - third-party free
driver : nvidia-381 - third-party free recommended
driver : nvidia-375 - third-party free
== cpu-microcode.py ==
driver : amd64-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=fr_CA.UTF-8
LANGUAGE=fr_CA:fr
LC_CTYPE="fr_CA.UTF-8"
LC_NUMERIC="fr_CA.UTF-8"
LC_TIME="fr_CA.UTF-8"
LC_COLLATE="fr_CA.UTF-8"
LC_MONETARY="fr_CA.UTF-8"
LC_MESSAGES="fr_CA.UTF-8"
LC_PAPER="fr_CA.UTF-8"
LC_NAME="fr_CA.UTF-8"
LC_ADDRESS="fr_CA.UTF-8"
LC_TELEPHONE="fr_CA.UTF-8"
LC_MEASUREMENT="fr_CA.UTF-8"
LC_IDENTIFICATION="fr_CA.UTF-8"
LC_ALL=
/etc/default/locale:
# File generated by update-locale
LANG="fr_CA.UTF-8"
LANGUAGE="fr_CA:fr"
Active keyboard layout:
rules: evdev
model: pc105
layout: ca,us,us
variant: ,,
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="ca"
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
gir1.2-javascriptcoregtk-4.0 2.16.1-0ubuntu0.16.04.2 from:2.16.1-0ubuntu0.16.04.1
gir1.2-webkit2-4.0 2.16.1-0ubuntu0.16.04.2 from:2.16.1-0ubuntu0.16.04.1
libjavascriptcoregtk-4.0-18 2.16.1-0ubuntu0.16.04.2 from:2.16.1-0ubuntu0.16.04.1
libwebkit2gtk-4.0-37 2.16.1-0ubuntu0.16.04.2 from:2.16.1-0ubuntu0.16.04.1
libwebkit2gtk-4.0-37-gtk2 2.16.1-0ubuntu0.16.04.2 from:2.16.1-0ubuntu0.16.04.1
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
linux-headers-4.4.0-64 linux-headers-4.4.0-64-generic linux-headers-4.4.0-66
linux-headers-4.4.0-66-generic linux-headers-4.4.0-67
linux-headers-4.4.0-67-generic linux-headers-4.4.0-70
linux-headers-4.4.0-70-generic linux-headers-4.4.0-71
linux-headers-4.4.0-71-generic linux-headers-4.4.0-72
linux-headers-4.4.0-72-generic linux-image-4.4.0-64-generic
linux-image-4.4.0-66-generic linux-image-4.4.0-67-generic
linux-image-4.4.0-70-generic linux-image-4.4.0-71-generic
linux-image-4.4.0-72-generic linux-image-extra-4.4.0-64-generic
linux-image-extra-4.4.0-66-generic linux-image-extra-4.4.0-67-generic
linux-image-extra-4.4.0-70-generic linux-image-extra-4.4.0-71-generic
linux-image-extra-4.4.0-72-generic linux-signed-image-4.4.0-64-generic
linux-signed-image-4.4.0-66-generic linux-signed-image-4.4.0-67-generic
linux-signed-image-4.4.0-70-generic linux-signed-image-4.4.0-71-generic
linux-signed-image-4.4.0-72-generic snap-confine
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.
__________________ Configuration files of uninstalled packages: ________________
Package Version
nvidia-378 378.13-0ubuntu0~gpu16.04.3
nvidia-opencl-icd-378 378.13-0ubuntu0~gpu16.04.3
Use the following command to clean old configuration files:
sudo apt purge nvidia-378 nvidia-opencl-icd-378
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.4.0.77.83
linux-headers-4.4.0-64 4.4.0-64.85
linux-headers-4.4.0-64-generic 4.4.0-64.85
linux-headers-4.4.0-66 4.4.0-66.87
linux-headers-4.4.0-66-generic 4.4.0-66.87
linux-headers-4.4.0-67 4.4.0-67.88
linux-headers-4.4.0-67-generic 4.4.0-67.88
linux-headers-4.4.0-70 4.4.0-70.91
linux-headers-4.4.0-70-generic 4.4.0-70.91
linux-headers-4.4.0-71 4.4.0-71.92
linux-headers-4.4.0-71-generic 4.4.0-71.92
linux-headers-4.4.0-72 4.4.0-72.93
linux-headers-4.4.0-72-generic 4.4.0-72.93
linux-headers-4.4.0-75 4.4.0-75.96
linux-headers-4.4.0-75-generic 4.4.0-75.96
linux-headers-4.4.0-77 4.4.0-77.98
linux-headers-4.4.0-77-generic 4.4.0-77.98
linux-headers-generic 4.4.0.77.83
linux-image-4.4.0-64-generic 4.4.0-64.85
linux-image-4.4.0-66-generic 4.4.0-66.87
linux-image-4.4.0-67-generic 4.4.0-67.88
linux-image-4.4.0-70-generic 4.4.0-70.91
linux-image-4.4.0-71-generic 4.4.0-71.92
linux-image-4.4.0-72-generic 4.4.0-72.93
linux-image-4.4.0-75-generic 4.4.0-75.96
linux-image-4.4.0-77-generic 4.4.0-77.98
linux-image-extra-4.4.0-64-generic 4.4.0-64.85
linux-image-extra-4.4.0-66-generic 4.4.0-66.87
linux-image-extra-4.4.0-67-generic 4.4.0-67.88
linux-image-extra-4.4.0-70-generic 4.4.0-70.91
linux-image-extra-4.4.0-71-generic 4.4.0-71.92
linux-image-extra-4.4.0-72-generic 4.4.0-72.93
linux-image-extra-4.4.0-75-generic 4.4.0-75.96
linux-image-extra-4.4.0-77-generic 4.4.0-77.98
linux-image-generic 4.4.0.77.83
linux-signed-generic 4.4.0.77.83
linux-signed-image-4.4.0-64-generic 4.4.0-64.85
linux-signed-image-4.4.0-66-generic 4.4.0-66.87
linux-signed-image-4.4.0-67-generic 4.4.0-67.88
linux-signed-image-4.4.0-70-generic 4.4.0-70.91
linux-signed-image-4.4.0-71-generic 4.4.0-71.92
linux-signed-image-4.4.0-72-generic 4.4.0-72.93
linux-signed-image-4.4.0-75-generic 4.4.0-75.96
linux-signed-image-4.4.0-77-generic 4.4.0-77.98
linux-signed-image-generic 4.4.0.77.83
File list in /boot directory:
abi-4.4.0-64-generic
abi-4.4.0-66-generic
abi-4.4.0-67-generic
abi-4.4.0-70-generic
abi-4.4.0-71-generic
abi-4.4.0-72-generic
abi-4.4.0-75-generic
abi-4.4.0-77-generic
config-4.4.0-64-generic
config-4.4.0-66-generic
config-4.4.0-67-generic
config-4.4.0-70-generic
config-4.4.0-71-generic
config-4.4.0-72-generic
config-4.4.0-75-generic
config-4.4.0-77-generic
efi
grub
initrd.img-4.4.0-64-generic
initrd.img-4.4.0-66-generic
initrd.img-4.4.0-67-generic
initrd.img-4.4.0-70-generic
initrd.img-4.4.0-71-generic
initrd.img-4.4.0-72-generic
initrd.img-4.4.0-75-generic
initrd.img-4.4.0-77-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.4.0-64-generic
System.map-4.4.0-66-generic
System.map-4.4.0-67-generic
System.map-4.4.0-70-generic
System.map-4.4.0-71-generic
System.map-4.4.0-72-generic
System.map-4.4.0-75-generic
System.map-4.4.0-77-generic
vmlinuz-4.4.0-64-generic
vmlinuz-4.4.0-64-generic.efi.signed
vmlinuz-4.4.0-66-generic
vmlinuz-4.4.0-66-generic.efi.signed
vmlinuz-4.4.0-67-generic
vmlinuz-4.4.0-67-generic.efi.signed
vmlinuz-4.4.0-70-generic
vmlinuz-4.4.0-70-generic.efi.signed
vmlinuz-4.4.0-71-generic
vmlinuz-4.4.0-71-generic.efi.signed
vmlinuz-4.4.0-72-generic
vmlinuz-4.4.0-72-generic.efi.signed
vmlinuz-4.4.0-75-generic
vmlinuz-4.4.0-75-generic.efi.signed
vmlinuz-4.4.0-77-generic
vmlinuz-4.4.0-77-generic.efi.signed
________________________ Kernel Candidates for Removal ________________________
At least two kernel versions are kept from removal including running kernel.
Hint: Check the package candidates for removal before proceeding, juste in case !
kernel versions kept:
4.4.0-77-generic (running kernel)
4.4.0-75-generic
kernel candidates for removal:
4.4.0-64-generic 4.4.0-66-generic 4.4.0-67-generic 4.4.0-70-generic 4.4.0-71-generic 4.4.0-72-generic
Command to run in a terminal to purge the packages from the system:
sudo apt purge linux-headers-4.4.0-64 linux-headers-4.4.0-64-generic linux-image-4.4.0-64-generic linux-image-extra-4.4.0-64-generic linux-signed-image-4.4.0-64-generic linux-headers-4.4.0-66 linux-headers-4.4.0-66-generic linux-image-4.4.0-66-generic linux-image-extra-4.4.0-66-generic linux-signed-image-4.4.0-66-generic linux-headers-4.4.0-67 linux-headers-4.4.0-67-generic linux-image-4.4.0-67-generic linux-image-extra-4.4.0-67-generic linux-signed-image-4.4.0-67-generic linux-headers-4.4.0-70 linux-headers-4.4.0-70-generic linux-image-4.4.0-70-generic linux-image-extra-4.4.0-70-generic linux-signed-image-4.4.0-70-generic linux-headers-4.4.0-71 linux-headers-4.4.0-71-generic linux-image-4.4.0-71-generic linux-image-extra-4.4.0-71-generic linux-signed-image-4.4.0-71-generic linux-headers-4.4.0-72 linux-headers-4.4.0-72-generic linux-image-4.4.0-72-generic linux-image-extra-4.4.0-72-generic linux-signed-image-4.4.0-72-generic
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.10 by American Megatrends
[ 0.000000] efi: ACPI=0xba9d4000 ACPI 2.0=0xba9d4000 SMBIOS=0xf04c0
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
[ 0.470161] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.474924] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.510842] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.511160] SCSI subsystem initialized
[ 1.387530] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.387991] efifb: probing for efifb
[ 1.388003] efifb: framebuffer at 0xd1000000, mapped to 0xffffc90001000000, using 3072k, total 3072k
[ 1.388005] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.388006] efifb: scrolling: redraw
[ 1.388007] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.388123] fb0: EFI VGA frame buffer device
[ 1.812750] EFI Variables Facility v0.08 2004-May-17
[ 1.875510] scsi host0: ahci
[ 1.875645] scsi host1: ahci
[ 1.875769] scsi host2: ahci
[ 1.875895] scsi host3: ahci
[ 1.884242] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 2.366968] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.366999] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.367030] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.367057] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.368508] scsi 0:0:0:0: Direct-Access ATA ADATA SU800 1C PQ: 0 ANSI: 5
[ 2.368729] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.368741] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.368938] scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-60W 1A01 PQ: 0 ANSI: 5
[ 2.369134] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.369156] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.370521] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.376721] scsi 2:0:0:0: Direct-Access ATA Maxtor 6L080M0 1G10 PQ: 0 ANSI: 5
[ 2.376916] sd 2:0:0:0: [sdc] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.376940] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.377663] scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-H653B D300 PQ: 0 ANSI: 5
[ 2.390782] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.396936] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.397106] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.397186] sr 3:0:0:0: Attached scsi generic sg3 type 5
[ 2.399518] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 4.442313] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 5.951600] audit: type=1400 audit(1494681031.620:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=787 comm="apparmor_parser"
[ 5.951609] audit: type=1400 audit(1494681031.620:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=787 comm="apparmor_parser"
[ 5.952076] audit: type=1400 audit(1494681031.620:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=791 comm="apparmor_parser"
[ 5.952852] audit: type=1400 audit(1494681031.620:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=790 comm="apparmor_parser"
[ 5.952859] audit: type=1400 audit(1494681031.620:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=790 comm="apparmor_parser"
[ 5.952863] audit: type=1400 audit(1494681031.620:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=790 comm="apparmor_parser"
[ 5.952985] audit: type=1400 audit(1494681031.620:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=783 comm="apparmor_parser"
[ 5.952992] audit: type=1400 audit(1494681031.620:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=783 comm="apparmor_parser"
[ 5.953182] audit: type=1400 audit(1494681031.620:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=789 comm="apparmor_parser"
[ 18.238367] usb 1-3: reset high-speed USB device number 4 using ehci-pci
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Optical Mouse id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ Chicony USB Keyboard id=8 [slave keyboard (3)]
↳ Chicony USB Keyboard id=9 [slave keyboard (3)]
↳ UVC Camera (046d:0825) id=11 [slave keyboard (3)]
↳ Eee PC WMI hotkeys id=12 [slave keyboard (3)]
xrandr:
Screen 0: minimum 8 x 8, current 2560 x 1024, maximum 32767 x 32767
DVI-D-0 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.02*+ 75.02
1152x864 75.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94
HDMI-0 connected primary 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.02*+ 75.02
1280x960 60.00
1280x800 59.81
1280x720 60.00 50.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
720x576 50.00
720x480 59.94
640x480 75.00 72.81 59.94
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14.239] (==) No Layout section. Using the first Screen section.
[ 14.239] (==) No screen section available. Using defaults.
[ 14.239] (**) |-->Screen "Default Screen Section" (0)
[ 14.239] (**) | |-->Monitor "<default monitor>"
[ 14.240] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 14.244] (--) PCI:*(0:1:0:0) 10de:1c81:3842:6152 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 14.244] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[ 14.244] (II) LoadModule: "glx"
[ 14.245] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 14.308] (II) LoadModule: "nvidia"
[ 14.308] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 14.315] (II) LoadModule: "nouveau"
[ 14.318] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 14.321] (II) LoadModule: "modesetting"
[ 14.321] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 14.321] (II) LoadModule: "fbdev"
[ 14.321] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 14.321] (II) LoadModule: "vesa"
[ 14.322] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 14.325] (II) Loading sub module "fb"
[ 14.325] (II) LoadModule: "fb"
[ 14.325] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.326] (II) Loading sub module "wfb"
[ 14.326] (II) LoadModule: "wfb"
[ 14.326] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 14.327] (II) Loading sub module "ramdac"
[ 14.327] (II) LoadModule: "ramdac"
[ 14.330] (WW) Falling back to old probe method for modesetting
[ 14.330] (WW) Falling back to old probe method for fbdev
[ 14.330] (II) Loading sub module "fbdevhw"
[ 14.330] (II) LoadModule: "fbdevhw"
[ 14.330] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 14.330] (WW) Falling back to old probe method for vesa
[ 14.330] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 15.091] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1024
[ 15.095] (II) UnloadModule: "nouveau"
[ 15.096] (II) UnloadModule: "modesetting"
[ 15.096] (II) UnloadModule: "fbdev"
[ 15.096] (II) UnloadModule: "vesa"
[ 15.275] (II) Loading sub module "dri2"
[ 15.275] (II) LoadModule: "dri2"
[ 15.342] (II) LoadModule: "evdev"
[ 15.342] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.4.0-77-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.4.0-77-generic/updates/dkms
Found nvidia module: nvidia_381_drm.ko
Is nvidia loaded? yes
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? no
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? yes
Is fglrx kernel module available? no
Is nvidia kernel module available? yes
Vendor/Device Id: 10de:1c81
BusID "PCI:1@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Does it require offloading? no
last cards number = 1
Has amd? no
Has intel? no
Has nvidia? yes
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/nvidia-381/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/nvidia-381/ld.so.conf
Is nvidia enabled? yes
Is nvidia egl enabled? yes
Is fglrx enabled? no
Is mesa enabled? no
Is mesa egl enabled? no
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? yes
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? yes
Is prime egl available? no
Single card detected
Driver is already loaded and enabled
Nothing to do
No change - nothing to do
============================ Disks SMART Attributes ===========================
### ATA disks: sda sdb sdc
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-77-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ADATA SU800
LU WWN Device Id: 5 707c18 10032afc8
Firmware Version: P0801C
User Capacity: 128 035 676 160 bytes [128 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat May 13 21:11:47 2017 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
9 Power_On_Hours ------ 100 100 000 - 16
12 Power_Cycle_Count ------ 100 100 000 - 112
160 Unknown_Attribute ------ 100 100 000 - 0
161 Unknown_Attribute ------ 100 100 000 - 37
163 Unknown_Attribute ------ 100 100 000 - 11
164 Unknown_Attribute ------ 100 100 000 - 4134
165 Unknown_Attribute ------ 100 100 000 - 48
166 Unknown_Attribute ------ 100 100 000 - 2
167 Unknown_Attribute ------ 100 100 000 - 8
148 Unknown_Attribute ------ 100 100 000 - 5046
149 Unknown_Attribute ------ 100 100 000 - 217
150 Unknown_Attribute ------ 100 100 000 - 46
151 Unknown_Attribute ------ 100 100 000 - 186
169 Unknown_Attribute ------ 100 100 000 - 100
177 Wear_Leveling_Count ------ 100 100 050 - 1
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
192 Power-Off_Retract_Count ------ 100 100 000 - 6
194 Temperature_Celsius ------ 100 100 000 - 39
196 Reallocated_Event_Count ------ 100 100 016 - 0
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
232 Available_Reservd_Space ------ 100 100 000 - 100
241 Total_LBAs_Written ------ 100 100 000 - 11169
242 Total_LBAs_Read ------ 100 100 000 - 9829
245 Unknown_Attribute ------ 100 100 000 - 33072
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-77-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD10EZEX-60WN4A0
LU WWN Device Id: 5 0014ee 20ddea7a9
Firmware Version: 01.01A01
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat May 13 21:11:47 2017 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0
3 Spin_Up_Time POS--K 172 171 021 - 2366
4 Start_Stop_Count -O--CK 100 100 000 - 100
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate POSR-K 200 200 051 - 0
9 Power_On_Hours -O--CK 100 100 000 - 520
10 Spin_Retry_Count PO--CK 100 253 051 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 100
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 068 067 040 - 32 (Min/Max 23/32)
192 Power-Off_Retract_Count -O--CK 200 200 000 - 1
193 Load_Cycle_Count -O--CK 200 200 000 - 98
194 Temperature_Celsius -O---K 111 110 000 - 32
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
# Drive sdc:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-77-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Maxtor DiamondMax 10 (ATA/133 and SATA/150)
Device Model: Maxtor 6L080M0
Firmware Version: BANC1G10
User Capacity: 80 000 000 000 bytes [80,0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 0
Local Time is: Sat May 13 21:11:48 2017 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
3 Spin_Up_Time POS--K 224 221 063 - 8921
4 Start_Stop_Count -O--CK 253 253 000 - 1825
5 Reallocated_Sector_Ct PO--CK 253 253 063 - 0
6 Read_Channel_Margin P----- 253 253 100 - 0
7 Seek_Error_Rate -O-R-- 253 247 000 - 0
8 Seek_Time_Performance POS--K 251 240 187 - 50532
9 Power_On_Minutes -O--CK 214 214 000 - 476h+29m
10 Spin_Retry_Count PO-R-K 220 219 157 - 23
11 Calibration_Retry_Count PO-R-K 253 252 223 - 0
12 Power_Cycle_Count -O--CK 249 249 000 - 1773
192 Power-Off_Retract_Count -O--CK 253 253 000 - 0
193 Load_Cycle_Count -O--CK 253 253 000 - 0
194 Temperature_Celsius -O--CK 035 253 000 - 32
195 Hardware_ECC_Recovered -O-R-- 253 252 000 - 22171
196 Reallocated_Event_Count ---R-- 253 253 000 - 0
197 Current_Pending_Sector ---R-- 253 253 000 - 0
198 Offline_Uncorrectable ---R-- 253 253 000 - 0
199 UDMA_CRC_Error_Count ---R-- 199 199 000 - 0
200 Multi_Zone_Error_Rate -O-R-- 253 252 000 - 0
201 Soft_Read_Error_Rate -O-R-- 253 252 000 - 0
202 Data_Address_Mark_Errs -O-R-- 253 252 000 - 0
203 Run_Out_Cancel PO-R-- 253 252 180 - 0
204 Soft_ECC_Correction -O-R-- 253 252 000 - 0
205 Thermal_Asperity_Rate -O-R-- 253 252 000 - 0
207 Spin_High_Current -O-R-K 237 236 000 - 12
208 Spin_Buzz -O-R-K 253 252 000 - 0
209 Offline_Seek_Performnce --S--K 240 240 000 - 159
210 Unknown_Attribute -O--CK 253 252 000 - 0
211 Unknown_Attribute -O--CK 253 252 000 - 0
212 Unknown_Attribute -O--CK 253 252 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors LoggedJe te prie de presser la touche SHIFT au démarrage pour faire apparaître le menu Grub, de sélectionner la première ligne ("ubuntu") de ce menu et de valider ce choix par Entrée. A partir de cet instant, compte les secondes jusqu'à l'apparition de l'écran de connexion de session (là où tu dois rentrer ton mot de passe). Donne le résultat dans ta réponse.
Dernière modification par malbo (Le 14/05/2017, à 06:42)
Hors ligne
#5 Le 14/05/2017, à 15:12
- kid24
Re : Démarrage ubuntu 6 fois plus long que win10
Bonjours Malbo,
J ais chronométré le résultat est de 24 secondes. Ce que j'ais remarque, le menu grub de gnome me semble beaucoup plus long a ouvrir que celui de lubuntu installé sur mon très vieux laptop. En comparaison si les 2 pc sont lancé en même temps c'est le double a l ouverture et je ne compare même pas avec mon pc sur win10. Peut etre que je suis pas patient.
Merci
Hors ligne
#6 Le 14/05/2017, à 15:32
- michel_04
Re : Démarrage ubuntu 6 fois plus long que win10
Bonjour,
kid24 a écrit :
je ne compare même pas avec mon pc sur win10.
Ton PC sous Windows 10 n'est jamais arrêté.
Lorsque tu cliques sur "Arrêter", il se met en hibernation.
Ce qui donne l'impression qu'il démarre très vite, alors qu'il sort de l'hibernation très vite.
Sauf si tu as modifié les actions du bouton Arrêter.
A+
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#7 Le 14/05/2017, à 15:41
- kid24
Re : Démarrage ubuntu 6 fois plus long que win10
Bonjours Michel,
Merci pour l'info je croyais que lorsque que tu clique sur arrêter système et que tous les fans, écran et autre périphériques ce mettre a off que le pc était bien éteint.
Merci
Hors ligne
#8 Le 14/05/2017, à 15:46
- michel_04
Re : Démarrage ubuntu 6 fois plus long que win10
Re,
kid24 a écrit :
je croyais ~~~~ le pc était bien éteint.
Voir dans Désactiver l'hibernation de Windows le lien menant à Désactiver le démarrage rapide de Windows 8.
A+
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#9 Le 14/05/2017, à 16:39
- Roschan
Re : Démarrage ubuntu 6 fois plus long que win10
le menu grub de gnome
hein
Hors ligne
#10 Le 14/05/2017, à 17:06
- malbo
Re : Démarrage ubuntu 6 fois plus long que win10
Je pense que kid24 veut dire "le menu Grub de mon Ubuntu GNOME 16.04" puisqu'il a noté "Mon ubuntu gnome 16.04lts" dans le post #1
Hors ligne
Pages : 1