Pages : 1
#1 Le 16/10/2013, à 17:42
- mao-40
Freeze après démarrage
Bonsoir,
Depuis une semaine, j'ai des freezes répétitifs après chaque démarrage du PC juste après m'être loggué (parfois avant mais très rarement).
Deux ou trois fois à chaque démarrage du PC et une fois lancé correctement j'ai parfois une dizaine de pop-up de crash en tous genres demandant d'avertir les développeurs.
Depuis le passage à Gnome-Shell, j'avais toujours eu ces messages au démarrage mais limité à une ou deux fenêtres (on s'habitue à l'instabilité)... Mais là ça se complique...
J'ai changé les pilotes NVidia pensant que ça pouvait venir de là en vain...
Ce type de défaut est-il identifié ? Des solutions connues ?
Merci pour votre aide
dmesg si besoin
[ 0.520049] usb usb1: Manufacturer: Linux 3.8.0-32-generic ehci_hcd
[ 0.520052] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.520156] hub 1-0:1.0: USB hub found
[ 0.520163] hub 1-0:1.0: 4 ports detected
[ 0.520253] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.520257] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.520261] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.520272] ehci-pci 0000:00:1d.7: debug port 1
[ 0.524183] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.524196] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfcdff800
[ 0.536018] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.536051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.536054] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.536056] usb usb2: Product: EHCI Host Controller
[ 0.536059] usb usb2: Manufacturer: Linux 3.8.0-32-generic ehci_hcd
[ 0.536061] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.536149] hub 2-0:1.0: USB hub found
[ 0.536153] hub 2-0:1.0: 8 ports detected
[ 0.536265] ehci-platform: EHCI generic platform driver
[ 0.536272] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.536285] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.536303] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.536306] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.536310] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.536340] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b080
[ 0.536370] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.536373] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.536375] usb usb3: Product: UHCI Host Controller
[ 0.536377] usb usb3: Manufacturer: Linux 3.8.0-32-generic uhci_hcd
[ 0.536379] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.536452] hub 3-0:1.0: USB hub found
[ 0.536456] hub 3-0:1.0: 2 ports detected
[ 0.536520] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.536523] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.536528] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.536559] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b400
[ 0.536585] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.536587] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.536589] usb usb4: Product: UHCI Host Controller
[ 0.536591] usb usb4: Manufacturer: Linux 3.8.0-32-generic uhci_hcd
[ 0.536593] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.536663] hub 4-0:1.0: USB hub found
[ 0.536666] hub 4-0:1.0: 2 ports detected
[ 0.536728] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.536731] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.536736] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.536757] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[ 0.536782] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.536785] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.536787] usb usb5: Product: UHCI Host Controller
[ 0.536789] usb usb5: Manufacturer: Linux 3.8.0-32-generic uhci_hcd
[ 0.536791] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.536862] hub 5-0:1.0: USB hub found
[ 0.536866] hub 5-0:1.0: 2 ports detected
[ 0.536927] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.536930] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.536937] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.536957] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
[ 0.536987] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.536989] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.536991] usb usb6: Product: UHCI Host Controller
[ 0.536993] usb usb6: Manufacturer: Linux 3.8.0-32-generic uhci_hcd
[ 0.536995] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.537068] hub 6-0:1.0: USB hub found
[ 0.537071] hub 6-0:1.0: 2 ports detected
[ 0.537134] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.537137] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.537142] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.537162] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[ 0.537189] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.537192] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.537194] usb usb7: Product: UHCI Host Controller
[ 0.537196] usb usb7: Manufacturer: Linux 3.8.0-32-generic uhci_hcd
[ 0.537198] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.537277] hub 7-0:1.0: USB hub found
[ 0.537280] hub 7-0:1.0: 2 ports detected
[ 0.537345] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.537348] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.537353] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.537373] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 0.537399] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.537401] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.537403] usb usb8: Product: UHCI Host Controller
[ 0.537406] usb usb8: Manufacturer: Linux 3.8.0-32-generic uhci_hcd
[ 0.537407] usb usb8: SerialNumber: 0000:00:1d.3
[ 0.537477] hub 8-0:1.0: USB hub found
[ 0.537480] hub 8-0:1.0: 2 ports detected
[ 0.537587] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.539847] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.539853] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.540022] mousedev: PS/2 mouse device common for all mice
[ 0.540172] rtc_cmos 00:02: RTC can wake from S4
[ 0.540291] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.540319] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.540403] device-mapper: uevent: version 1.0.3
[ 0.540460] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 0.540466] cpuidle: using governor ladder
[ 0.540468] cpuidle: using governor menu
[ 0.540471] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.540473] EFI Variables Facility v0.08 2004-May-17
[ 0.540660] ashmem: initialized
[ 0.540763] TCP: cubic registered
[ 0.540856] NET: Registered protocol family 10
[ 0.541018] NET: Registered protocol family 17
[ 0.541026] Key type dns_resolver registered
[ 0.541228] Loading module verification certificates
[ 0.542211] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: b321b476552a1a72c87aa54c41b14065cff82a1d'
[ 0.542223] registered taskstats version 1
[ 0.545032] Key type trusted registered
[ 0.547009] Key type encrypted registered
[ 0.549427] rtc_cmos 00:02: setting system clock to 2013-10-16 18:23:12 UTC (1381947792)
[ 0.550081] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.550083] EDD information not available.
[ 0.834855] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.845698] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 0.845704] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.977445] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 0.977448] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 0.977451] usb 1-2: Product: USB2.0 Hub
[ 0.977841] hub 1-2:1.0: USB hub found
[ 0.978191] hub 1-2:1.0: 4 ports detected
[ 1.144033] usb 2-5: new high-speed USB device number 2 using ehci-pci
[ 1.277367] usb 2-5: New USB device found, idVendor=05e3, idProduct=0608
[ 1.277370] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.277373] usb 2-5: Product: USB2.0 Hub
[ 1.277776] hub 2-5:1.0: USB hub found
[ 1.278116] hub 2-5:1.0: 4 ports detected
[ 1.312085] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.312103] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.312241] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.312255] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.320338] ata1.00: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
[ 1.320341] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.336178] ata1.00: configured for UDMA/133
[ 1.336283] scsi 0:0:0:0: Direct-Access ATA WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
[ 1.336389] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.336405] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.336442] sd 0:0:0:0: [sda] Write Protect is off
[ 1.336445] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.336465] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.344178] ata2.00: ATAPI: HL-DT-ST BDDVDRW GBC-H20L, 1.B8, max UDMA/100
[ 1.344359] ata2.01: ATA-8: ST2000DM001-9YN164, CC4C, max UDMA/133
[ 1.344362] ata2.01: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.376227] ata2.00: configured for UDMA/100
[ 1.388018] usb 2-7: new high-speed USB device number 3 using ehci-pci
[ 1.392354] ata2.01: configured for UDMA/133
[ 1.409342] sda: sda1 sda2 < sda5 sda6 >
[ 1.409688] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.464019] tsc: Refined TSC clocksource calibration: 2499.948 MHz
[ 1.464024] Switching to clocksource tsc
[ 1.521315] scsi 1:0:0:0: CD-ROM HL-DT-ST BDDVDRW GBC-H20L 1.B8 PQ: 0 ANSI: 5
[ 1.521742] usb 2-7: New USB device found, idVendor=2304, idProduct=0237
[ 1.521746] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.521749] usb 2-7: Product: PCTV 73e
[ 1.521751] usb 2-7: Manufacturer: Pinnacle
[ 1.521754] usb 2-7: SerialNumber: 0000000M86A2YN2
[ 1.629305] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.629308] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.629388] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.629485] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.635930] scsi 1:0:1:0: Direct-Access ATA ST2000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 1.636073] sd 1:0:1:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.636077] sd 1:0:1:0: [sdb] 4096-byte physical blocks
[ 1.636101] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 1.636137] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.636140] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.636168] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.659709] sdb: sdb1
[ 1.659956] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 1.661230] Freeing unused kernel memory: 996k freed
[ 1.661442] Write protecting the kernel read-only data: 12288k
[ 1.664475] Freeing unused kernel memory: 1164k freed
[ 1.667279] Freeing unused kernel memory: 1076k freed
[ 1.679841] udevd[118]: starting version 175
[ 1.732521] Disabling lock debugging due to kernel taint
[ 1.739827] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.740231] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 1.740413] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90000c66000, 00:23:54:76:7a:cf, XID 1c4000c0 IRQ 44
[ 1.740416] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 1.792093] firewire_ohci 0000:01:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 2.020017] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 2.196597] usb 4-1: New USB device found, idVendor=046d, idProduct=c051
[ 2.196603] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.196606] usb 4-1: Product: USB-PS/2 Optical Mouse
[ 2.196608] usb 4-1: Manufacturer: Logitech
[ 2.221654] usbcore: registered new interface driver usbhid
[ 2.221657] usbhid: USB HID core driver
[ 2.224603] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2
[ 2.224722] hid-generic 0003:046D:C051.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-1/input0
[ 2.238123] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.238126] EXT4-fs (sda1): write access will be enabled during recovery
[ 2.292211] firewire_core 0000:01:05.0: created device fw0: GUID 001e8c0001a34445, S400
[ 2.436029] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 2.618413] usb 8-2: New USB device found, idVendor=046d, idProduct=c52e
[ 2.618418] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.618421] usb 8-2: Product: USB Receiver
[ 2.618424] usb 8-2: Manufacturer: Logitech
[ 2.626707] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.0/input/input3
[ 2.626825] hid-generic 0003:046D:C52E.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.3-2/input0
[ 2.629968] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.1/input/input4
[ 2.630221] hid-generic 0003:046D:C52E.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-2/input1
[ 2.828317] usb 1-2.4: new high-speed USB device number 4 using ehci-pci
[ 2.921446] usb 1-2.4: New USB device found, idVendor=05e3, idProduct=0608
[ 2.921456] usb 1-2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.921458] usb 1-2.4: Product: USB2.0 Hub
[ 2.921852] hub 1-2.4:1.0: USB hub found
[ 2.922191] hub 1-2.4:1.0: 4 ports detected
[ 2.996244] usb 2-5.1: new high-speed USB device number 5 using ehci-pci
[ 3.620328] EXT4-fs (sda1): recovery complete
[ 3.628497] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.723246] usb 2-5.1: New USB device found, idVendor=0bda, idProduct=0151
[ 3.723251] usb 2-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.723254] usb 2-5.1: Product: USB2.0-CRW
[ 3.723257] usb 2-5.1: Manufacturer: Generic
[ 3.723259] usb 2-5.1: SerialNumber: 20060413092100000
[ 3.796251] usb 2-5.2: new full-speed USB device number 6 using ehci-pci
[ 3.891868] usb 2-5.2: New USB device found, idVendor=1784, idProduct=000a
[ 3.891873] usb 2-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.891876] usb 2-5.2: Product: eHome Infrared Transceiver
[ 3.891879] usb 2-5.2: Manufacturer: Topseed Technology Corp.
[ 3.891881] usb 2-5.2: SerialNumber: TS000B7U
[ 3.893442] hid-generic 0003:1784:000A.0004: hiddev0,hidraw3: USB HID v1.11 Device [Topseed Technology Corp. eHome Infrared Transceiver] on usb-0000:00:1d.7-5.2/input1
[ 4.092318] usb 1-2.4.1: new low-speed USB device number 5 using ehci-pci
[ 4.189567] usb 1-2.4.1: New USB device found, idVendor=05d5, idProduct=0624
[ 4.189570] usb 1-2.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.189572] usb 1-2.4.1: Product: USB Keyboard
[ 4.189574] usb 1-2.4.1: Manufacturer: KB
[ 4.192867] input: KB USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.4/1-2.4.1/1-2.4.1:1.0/input/input5
[ 4.192946] hid-generic 0003:05D5:0624.0005: input,hidraw4: USB HID v1.10 Keyboard [KB USB Keyboard ] on usb-0000:00:1a.7-2.4.1/input0
[ 4.195717] input: KB USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.4/1-2.4.1/1-2.4.1:1.1/input/input6
[ 4.195857] hid-generic 0003:05D5:0624.0006: input,hidraw5: USB HID v1.10 Device [KB USB Keyboard ] on usb-0000:00:1a.7-2.4.1/input1
[ 18.963201] Adding 5863688k swap on /dev/sda6. Priority:-1 extents:1 across:5863688k
[ 19.033811] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.054900] udevd[382]: starting version 175
[ 19.326614] type=1400 audit(1381947811.275:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=575 comm="apparmor_parser"
[ 19.326651] type=1400 audit(1381947811.275:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=574 comm="apparmor_parser"
[ 19.326978] type=1400 audit(1381947811.275:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=575 comm="apparmor_parser"
[ 19.327018] type=1400 audit(1381947811.275:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=574 comm="apparmor_parser"
[ 19.327183] type=1400 audit(1381947811.275:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=575 comm="apparmor_parser"
[ 19.327227] type=1400 audit(1381947811.275:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=574 comm="apparmor_parser"
[ 19.499355] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20121018/utaddress-251)
[ 19.499364] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.499389] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 19.507735] microcode: CPU0 sig=0x10677, pf=0x10, revision=0x705
[ 19.509593] lp: driver loaded but no devices found
[ 19.516669] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.518135] f71882fg: Found f8000 chip at 0xa00, revision 41
[ 19.518310] f71882fg f71882fg.2560: Fan: 1 is in duty-cycle mode
[ 19.518322] f71882fg f71882fg.2560: Fan: 2 is in duty-cycle mode
[ 19.518332] f71882fg f71882fg.2560: Fan: 3 is in duty-cycle mode
[ 19.518805] nvidia: module license 'NVIDIA' taints kernel.
[ 19.542488] Initializing USB Mass Storage driver...
[ 19.544276] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 19.551174] scsi4 : usb-storage 2-5.1:1.0
[ 19.551322] usbcore: registered new interface driver usb-storage
[ 19.551324] USB Mass Storage support registered.
[ 19.561879] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 19.562042] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 310.44 Wed Mar 27 14:51:30 PDT 2013
[ 19.564340] cfg80211: Calling CRDA to update world regulatory domain
[ 19.565763] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 19.599689] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 19.608311] Registered IR keymap rc-rc6-mce
[ 19.608405] input: Media Center Ed. eHome Infrared Remote Transceiver (1784:000a) as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.2/2-5.2:1.0/rc/rc0/input7
[ 19.608452] rc0: Media Center Ed. eHome Infrared Remote Transceiver (1784:000a) as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.2/2-5.2:1.0/rc/rc0
[ 19.614380] IR NEC protocol handler initialized
[ 19.618292] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 19.620623] IR RC5(x) protocol handler initialized
[ 19.624961] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 19.627116] IR RC6 protocol handler initialized
[ 19.631676] IR JVC protocol handler initialized
[ 19.636338] hda_codec: ALC1200: SKU not ready 0x411111f0
[ 19.636785] IR Sony protocol handler initialized
[ 19.644931] IR SANYO protocol handler initialized
[ 19.649968] dvb-usb: found a 'Pinnacle PCTV 73e' in warm state.
[ 19.650388] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 19.650478] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input8
[ 19.650612] DVB: registering new adapter (Pinnacle PCTV 73e)
[ 19.650904] IR MCE Keyboard/mouse protocol handler initialized
[ 19.652611] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 19.652690] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 19.652743] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 19.652803] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 19.652875] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 19.652929] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 19.653018] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 19.653119] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 19.653447] hda_intel: Disabling MSI
[ 19.653455] hda-intel 0000:05:00.1: Handle VGA-switcheroo audio client
[ 19.657217] lirc_dev: IR Remote Control driver registered, major 249
[ 19.659726] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[ 19.659730] IR LIRC bridge handler initialized
[ 19.705865] microcode: CPU1 sig=0x10677, pf=0x10, revision=0x705
[ 19.707441] microcode: CPU2 sig=0x10677, pf=0x10, revision=0x705
[ 19.709079] microcode: CPU3 sig=0x10677, pf=0x10, revision=0x705
[ 19.710604] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 19.859639] usb 2-7: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 19.864031] mceusb 2-5.2:1.0: Registered Topseed Technology Corp. eHome Infrared Transceiver with mce emulator interface version 1
[ 19.864039] mceusb 2-5.2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
[ 19.864084] usbcore: registered new interface driver mceusb
[ 19.880291] cfg80211: World regulatory domain updated:
[ 19.880294] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.880296] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.880298] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.880300] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.880302] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.880304] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.008094] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:05:00.1/sound/card1/input17
[ 20.008191] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:05:00.1/sound/card1/input18
[ 20.074875] DiB0070: successfully identified
[ 20.100013] Registered IR keymap rc-dib0700-rc5
[ 20.100131] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-7/rc/rc1/input19
[ 20.100184] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-7/rc/rc1
[ 20.100377] dvb-usb: schedule remote query interval to 50 msecs.
[ 20.100381] dvb-usb: Pinnacle PCTV 73e successfully initialized and connected.
[ 20.100500] dib0700: rc submit urb failed
[ 20.100545] usbcore: registered new interface driver dvb_usb_dib0700
[ 20.554542] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 20.560769] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 20.567022] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 20.573274] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 20.573859] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 20.574077] sd 4:0:0:1: Attached scsi generic sg4 type 0
[ 20.574326] sd 4:0:0:2: Attached scsi generic sg5 type 0
[ 20.574515] sd 4:0:0:3: Attached scsi generic sg6 type 0
[ 20.581013] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 20.581766] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 20.582510] sd 4:0:0:2: [sde] Attached SCSI removable disk
[ 20.583258] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[ 22.007879] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 22.007883] vesafb: scrolling: redraw
[ 22.007885] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 22.011410] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011700000, using 3072k, total 3072k
[ 22.011616] Console: switching to colour frame buffer device 128x48
[ 22.013871] fb0: VESA VGA frame buffer device
[ 22.384555] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 23.122354] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 23.222369] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 23.338742] init: failsafe main process (1076) killed by TERM signal
[ 23.339067] init: munin-node main process (1094) terminated with status 127
[ 23.339089] init: munin-node main process ended, respawning
[ 23.522076] Bluetooth: Core ver 2.16
[ 23.522097] NET: Registered protocol family 31
[ 23.522098] Bluetooth: HCI device and connection manager initialized
[ 23.522108] Bluetooth: HCI socket layer initialized
[ 23.522111] Bluetooth: L2CAP socket layer initialized
[ 23.522117] Bluetooth: SCO socket layer initialized
[ 23.525239] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.525242] Bluetooth: BNEP filters: protocol multicast
[ 23.525248] Bluetooth: BNEP socket layer initialized
[ 23.552468] Bluetooth: RFCOMM TTY layer initialized
[ 23.552483] Bluetooth: RFCOMM socket layer initialized
[ 23.552485] Bluetooth: RFCOMM ver 1.11
[ 23.775134] type=1400 audit(1381947815.719:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1208 comm="apparmor_parser"
[ 23.775351] type=1400 audit(1381947815.719:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1205 comm="apparmor_parser"
[ 23.775489] type=1400 audit(1381947815.719:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1207 comm="apparmor_parser"
[ 23.775524] type=1400 audit(1381947815.719:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1208 comm="apparmor_parser"
[ 23.837113] init: avahi-cups-reload main process (1233) terminated with status 1
[ 23.895949] ppdev: user-space parallel port driver
[ 23.915734] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.929278] r8169 0000:02:00.0 eth0: link down
[ 23.929313] r8169 0000:02:00.0 eth0: link down
[ 23.929355] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.929653] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.144286] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 24.144586] zram: Creating 4 devices ...
[ 24.163440] Adding 764152k swap on /dev/zram0. Priority:5 extents:1 across:764152k SS
[ 24.170242] Adding 764152k swap on /dev/zram1. Priority:5 extents:1 across:764152k SS
[ 24.174407] Adding 764152k swap on /dev/zram2. Priority:5 extents:1 across:764152k SS
[ 24.180048] Adding 764152k swap on /dev/zram3. Priority:5 extents:1 across:764152k SS
[ 24.194006] init: teamviewerd main process (1308) killed by TERM signal
[ 24.195739] init: gdm main process (1392) killed by TERM signal
[ 25.619156] r8169 0000:02:00.0 eth0: link up
[ 25.619171] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 26.662381] NVRM: GPU at 0000:05:00: GPU-6d635832-d485-1407-b1e1-d789c819666e
[ 26.662388] NVRM: Your system is not currently configured to drive a VGA console
[ 26.662390] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 26.662391] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 26.662393] NVRM: drivers including, but not limited to, vesafb, may result in
[ 26.662394] NVRM: corruption and stability problems, and is not supported.
[ 28.431691] vboxdrv: Found 4 processor cores.
[ 28.431906] vboxdrv: fAsync=0 offMin=0x573 offMax=0x3a20
[ 28.432022] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 28.432024] vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
[ 28.474818] vboxpci: IOMMU not found (not registered)
[ 31.634617] init: plymouth-stop pre-start process (2234) terminated with status 1
[ 48.557315] [UFW BLOCK] IN=eth0 OUT= MAC=00:23:54:76:7a:cf:00:25:15:a9:ac:78:08:00 SRC=192.168.1.1 DST=192.168.1.40 LEN=326 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=41858 LEN=306
[ 49.558503] [UFW BLOCK] IN=eth0 OUT= MAC=00:23:54:76:7a:cf:00:25:15:a9:ac:78:08:00 SRC=192.168.1.1 DST=192.168.1.40 LEN=328 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=41858 LEN=308
[ 72.595600] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:25:15:a9:ac:78:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x10 PREC=0x80 TTL=1 ID=10642 PROTO=2
[ 72.596367] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:25:15:a9:ac:78:08:00 SRC=172.16.255.254 DST=224.0.0.1 LEN=28 TOS=0x10 PREC=0x80 TTL=1 ID=10643 PROTO=2 Dernière modification par mao-40 (Le 16/10/2013, à 19:26)
- 1. * Intel Core i7-8700K 3.7GHzx6 - 16Go - Nvidia GeForce GTX 1050 1Go - Ubuntu 24.10 64bits
Hors ligne
Pages : 1