#1 Le 29/06/2007, à 19:45
- kumkum23
Beryl + Geforce 2 Mx [au secours !!!!]
Bonjour,
je suis nouveau dans le monde linux, et j'ai chez moi un vieux pc sur lequel j'aimerai bien installer beryl.
c'est un athlon thunderbird 1ghz sur une abit kt7 raid avec une geforce2 MX. j'ai installé les nvidia 0.9639
j'ai fai les modif du xorg et si je fais "beryl --test-only" j'obtiens bien :
**************************************************************
* Beryl system compatiblity check *
**************************************************************
Detected xserver : NVIDIA
Checking Display :0.0 ...
Checking for XComposite extension : passed (v0.3)
Checking for XDamage extension : passed
Checking for RandR extension : passed
Checking for XSync extension : passed
Checking Screen 0 ...
Checking for GLX_SGIX_fbconfig : passed
Checking for GLX_EXT_texture_from_pixmap : passed
Checking for non power of two texture support : passed
Checking maximum texture size : passed (2046x2046)
voici mon xorg.conf trouvé sur un forum d'un user avec geforce2 MX:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Nov 1 19:47:17 PST 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
Option "AIGLX" "true"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
#Load "dri"
Load "ddc"
Load "dbe"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "SDM-HS75P"
Option "DPMS"
EndSection
Section "Device"
Identifier "nVidia Corporation NV17 [GeForce4 MX 440-SE]"
Driver "nvidia"
EndSection
Section "Screen"
#Option "backingstore" "true"
Option "AllowGLXWithComposite" "True"
Option "RenderAccel" "true"
Identifier "Default Screen"
Device "nVidia Corporation NV17 [GeForce4 MX 440-SE]"
Monitor "SDM-HS75P"
DefaultDepth 24
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
Option "XAANoOffscreenPixmaps"
Option "NvAGP" "3"
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "Extensions"
#Option "RENDER" "Enable"
Option "Composite" "Enable"
EndSectionlorsque je lance beryl manager toutes les bordures des fenetres disparaissent et mon ecran se fige .....
je ne sais plus quoi faire .... ya t il quelqu'un qui a installé beryl avec une carte similaire ?
Merci !
#2 Le 29/06/2007, à 20:08
- kumkum23
Re : Beryl + Geforce 2 Mx [au secours !!!!]
désolé j'oubliai de preciser que j'etais sous Ubuntu 7.04 Feisty Fawn
#3 Le 29/06/2007, à 20:22
- Fabounet
Re : Beryl + Geforce 2 Mx [au secours !!!!]
j'avais la meme config que toi, et j'utilisais les drivers 1.0-7184
ca marchais bien, mais la carte n'a pas assez de mémoire, et si tu ouvres plus de 4 ou 5 fenetres, les nouvelles sont toutes noires.
bref, je pense que tu devras te passer de beryl sur cette petite config.
par contre xcmpmgr lui marchais au poil, et me permettais d'avoir transparence et ombrages.
"Quiconque est prêt à sacrifier sa liberté pour une sécurité provisoire ne mérite ni l'un ni l'autre." (Benjamin Franklin)
>> Changez le look de votre bureau, essayez Glx-Dock ! [http://glx-dock.org] <<
Hors ligne