#1 Le 08/06/2007, à 20:44
- madjuju
[resolu par maj driver] Ctrl + F1 Ou F2 Ou FxPas De Signal Sauf Sur F7
bONJOUR
Mon serveur graphique est ok sous ubuntu Feisty
Par contre impossible de changer de voix F1 ou les autres mon écran me renvoi le message "pas de signale"
j'utilise les derniers drivers de NVIDIA
Voici mon XORG.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Thu May 3 16:03:51 PDT 2007
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu May 3 16:02:56 PDT 2007
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "NEC LCD1760N"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "NEC LCD1760NX"
HorizSync 31.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Hitachi Projector"
HorizSync 15.0 - 80.0
VertRefresh 5
Dernière modification par madjuju (Le 20/06/2007, à 12:42)
Quad Core 6600 G0 - P5K asus - 2048 DDR2 CORSAIR 8500- nvidia 8600 PCIE
Ubuntu 8.04 - 1 X 250 GO SATA - 1 X 500 GO SATA II et
P4 HT - Asus P5GD2 premium - 1 X 250 GO SATA Ubuntu 8.04
Nvidia asus 6600 GT
Hors ligne
#2 Le 14/06/2007, à 05:54
- madjuju
Re : [resolu par maj driver] Ctrl + F1 Ou F2 Ou FxPas De Signal Sauf Sur F7
up
Quad Core 6600 G0 - P5K asus - 2048 DDR2 CORSAIR 8500- nvidia 8600 PCIE
Ubuntu 8.04 - 1 X 250 GO SATA - 1 X 500 GO SATA II et
P4 HT - Asus P5GD2 premium - 1 X 250 GO SATA Ubuntu 8.04
Nvidia asus 6600 GT
Hors ligne