Ubuntu-fr

Froosties

Problème driver ati propriétaire.. installé mais tjr Vesa

Bonjour à tous,

J'ai installé les drivers propriétaires d'Ati en suivant ce guide sur une feisty toute fraiche :
http://doc.ubuntu-fr.org/materiel/ati_proprietaire

Tout a bien fonctionné, pour qu'une fois arrivé au moment de consulté le "fglrxinfo" j'obtiens toujours (en root):

display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (1.5 Mesa 6.5.2)

J'ai donc vérifié que le pilote d'accéleration graphique d'Ati était bien activé dans le gestionnaire de pilotes proprietaires. Il l'est.

j'ai ensuite vérifier mon xorg.conf qui ne contient plus aucune trace de Vesa. Le voila :

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
	InputDevice    "Synaptics Touchpad"
	Option "AIGLX" "false"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "vbe"
EndSection

Section "ServerFlags"
	Option	    "AIGLX" "off"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbVariant" "oss"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ImPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
	Identifier  "Synaptics Touchpad"
	Driver      "synaptics"
	Option	    "SendCoreEvents" "true"
	Option	    "Device" "/dev/psaux"
	Option	    "Protocol" "auto-dev"
	Option	    "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/input/wacom"
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/input/wacom"
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/input/wacom"
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "Generic Monitor"
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "Generic Video Card"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "Generic Video Card"
	Monitor    "Generic Monitor"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1600x1200" "(pitch" "1600)"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1600x1200" "(pitch" "1600)"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1600x1200" "(pitch" "1600)"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1600x1200" "(pitch" "1600)"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1600x1200" "(pitch" "1600)"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1600x1200" "(pitch" "1600)"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Group        "video"
	Mode         0660
EndSection

Section "Extensions"
	Option	"RENDER"	"Enable"
	Option	    "Composite" "Disable"
EndSection

J'ai installé XGL puis essayé de lancé une session, mais il est clair que quelquechose cloche car j'obtiens un ecran completement déformé (pixel).

Même en essayant fgl_gears (je ne me souviens plus la commande exacte) une fenetre s'ouvre et se ferme directement.

Si quelqu'un pouvait me tendre une main car j'avoue ne plus trop savoir quoi faire.
Merci d'avance.

Froosties

Re : Problème driver ati propriétaire.. installé mais tjr Vesa

Ah j'ai trouvé ca ..

(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.34.8
(II) fglrx(0):     Date: Feb 20 2007
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x2000 at 0xb7c9a000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *

Je pige pas tout

biggione

Re : Problème driver ati propriétaire.. installé mais tjr Vesa

Bonjour,

moi il me manquait beryl-xgl. C'était ca mon erreur, regarde le tuto ci-dessous, il explique comment installer beryl avec une ATI. Mais j'y est trouvé aussi d'autres réponses.

http://ubuntuguide.org/wiki/Ubuntu:Feisty

---

Le site pour trouver des logiciels gratuits pour les entreprises:    www.kamazotux.fr